1 /* Optimize by combining instructions for GNU compiler.
2 Copyright (C) 1987, 1988, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
3 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
4 2011, 2012 Free Software Foundation, Inc.
6 This file is part of GCC.
8 GCC is free software; you can redistribute it and/or modify it under
9 the terms of the GNU General Public License as published by the Free
10 Software Foundation; either version 3, or (at your option) any later
13 GCC is distributed in the hope that it will be useful, but WITHOUT ANY
14 WARRANTY; without even the implied warranty of MERCHANTABILITY or
15 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
18 You should have received a copy of the GNU General Public License
19 along with GCC; see the file COPYING3. If not see
20 <http://www.gnu.org/licenses/>. */
22 /* This module is essentially the "combiner" phase of the U. of Arizona
23 Portable Optimizer, but redone to work on our list-structured
24 representation for RTL instead of their string representation.
26 The LOG_LINKS of each insn identify the most recent assignment
27 to each REG used in the insn. It is a list of previous insns,
28 each of which contains a SET for a REG that is used in this insn
29 and not used or set in between. LOG_LINKs never cross basic blocks.
30 They were set up by the preceding pass (lifetime analysis).
32 We try to combine each pair of insns joined by a logical link.
33 We also try to combine triples of insns A, B and C when
34 C has a link back to B and B has a link back to A.
36 LOG_LINKS does not have links for use of the CC0. They don't
37 need to, because the insn that sets the CC0 is always immediately
38 before the insn that tests it. So we always regard a branch
39 insn as having a logical link to the preceding insn. The same is true
40 for an insn explicitly using CC0.
42 We check (with use_crosses_set_p) to avoid combining in such a way
43 as to move a computation to a place where its value would be different.
45 Combination is done by mathematically substituting the previous
46 insn(s) values for the regs they set into the expressions in
47 the later insns that refer to these regs. If the result is a valid insn
48 for our target machine, according to the machine description,
49 we install it, delete the earlier insns, and update the data flow
50 information (LOG_LINKS and REG_NOTES) for what we did.
52 There are a few exceptions where the dataflow information isn't
53 completely updated (however this is only a local issue since it is
54 regenerated before the next pass that uses it):
56 - reg_live_length is not updated
57 - reg_n_refs is not adjusted in the rare case when a register is
58 no longer required in a computation
59 - there are extremely rare cases (see distribute_notes) when a
61 - a LOG_LINKS entry that refers to an insn with multiple SETs may be
62 removed because there is no way to know which register it was
65 To simplify substitution, we combine only when the earlier insn(s)
66 consist of only a single assignment. To simplify updating afterward,
67 we never combine when a subroutine call appears in the middle.
69 Since we do not represent assignments to CC0 explicitly except when that
70 is all an insn does, there is no LOG_LINKS entry in an insn that uses
71 the condition code for the insn that set the condition code.
72 Fortunately, these two insns must be consecutive.
73 Therefore, every JUMP_INSN is taken to have an implicit logical link
74 to the preceding insn. This is not quite right, since non-jumps can
75 also use the condition code; but in practice such insns would not
80 #include "coretypes.h"
87 #include "hard-reg-set.h"
88 #include "basic-block.h"
89 #include "insn-config.h"
91 /* Include expr.h after insn-config.h so we get HAVE_conditional_move. */
93 #include "insn-attr.h"
95 #include "diagnostic-core.h"
98 #include "insn-codes.h"
99 #include "rtlhooks-def.h"
100 /* Include output.h for dump_file. */
104 #include "tree-pass.h"
109 /* Number of attempts to combine instructions in this function. */
111 static int combine_attempts;
113 /* Number of attempts that got as far as substitution in this function. */
115 static int combine_merges;
117 /* Number of instructions combined with added SETs in this function. */
119 static int combine_extras;
121 /* Number of instructions combined in this function. */
123 static int combine_successes;
125 /* Totals over entire compilation. */
127 static int total_attempts, total_merges, total_extras, total_successes;
129 /* combine_instructions may try to replace the right hand side of the
130 second instruction with the value of an associated REG_EQUAL note
131 before throwing it at try_combine. That is problematic when there
132 is a REG_DEAD note for a register used in the old right hand side
133 and can cause distribute_notes to do wrong things. This is the
134 second instruction if it has been so modified, null otherwise. */
138 /* When I2MOD is nonnull, this is a copy of the old right hand side. */
140 static rtx i2mod_old_rhs;
142 /* When I2MOD is nonnull, this is a copy of the new right hand side. */
144 static rtx i2mod_new_rhs;
146 typedef struct reg_stat_struct {
147 /* Record last point of death of (hard or pseudo) register n. */
150 /* Record last point of modification of (hard or pseudo) register n. */
153 /* The next group of fields allows the recording of the last value assigned
154 to (hard or pseudo) register n. We use this information to see if an
155 operation being processed is redundant given a prior operation performed
156 on the register. For example, an `and' with a constant is redundant if
157 all the zero bits are already known to be turned off.
159 We use an approach similar to that used by cse, but change it in the
162 (1) We do not want to reinitialize at each label.
163 (2) It is useful, but not critical, to know the actual value assigned
164 to a register. Often just its form is helpful.
166 Therefore, we maintain the following fields:
168 last_set_value the last value assigned
169 last_set_label records the value of label_tick when the
170 register was assigned
171 last_set_table_tick records the value of label_tick when a
172 value using the register is assigned
173 last_set_invalid set to nonzero when it is not valid
174 to use the value of this register in some
177 To understand the usage of these tables, it is important to understand
178 the distinction between the value in last_set_value being valid and
179 the register being validly contained in some other expression in the
182 (The next two parameters are out of date).
184 reg_stat[i].last_set_value is valid if it is nonzero, and either
185 reg_n_sets[i] is 1 or reg_stat[i].last_set_label == label_tick.
187 Register I may validly appear in any expression returned for the value
188 of another register if reg_n_sets[i] is 1. It may also appear in the
189 value for register J if reg_stat[j].last_set_invalid is zero, or
190 reg_stat[i].last_set_label < reg_stat[j].last_set_label.
192 If an expression is found in the table containing a register which may
193 not validly appear in an expression, the register is replaced by
194 something that won't match, (clobber (const_int 0)). */
196 /* Record last value assigned to (hard or pseudo) register n. */
200 /* Record the value of label_tick when an expression involving register n
201 is placed in last_set_value. */
203 int last_set_table_tick;
205 /* Record the value of label_tick when the value for register n is placed in
210 /* These fields are maintained in parallel with last_set_value and are
211 used to store the mode in which the register was last set, the bits
212 that were known to be zero when it was last set, and the number of
213 sign bits copies it was known to have when it was last set. */
215 unsigned HOST_WIDE_INT last_set_nonzero_bits;
216 char last_set_sign_bit_copies;
217 ENUM_BITFIELD(machine_mode) last_set_mode : 8;
219 /* Set nonzero if references to register n in expressions should not be
220 used. last_set_invalid is set nonzero when this register is being
221 assigned to and last_set_table_tick == label_tick. */
223 char last_set_invalid;
225 /* Some registers that are set more than once and used in more than one
226 basic block are nevertheless always set in similar ways. For example,
227 a QImode register may be loaded from memory in two places on a machine
228 where byte loads zero extend.
230 We record in the following fields if a register has some leading bits
231 that are always equal to the sign bit, and what we know about the
232 nonzero bits of a register, specifically which bits are known to be
235 If an entry is zero, it means that we don't know anything special. */
237 unsigned char sign_bit_copies;
239 unsigned HOST_WIDE_INT nonzero_bits;
241 /* Record the value of the label_tick when the last truncation
242 happened. The field truncated_to_mode is only valid if
243 truncation_label == label_tick. */
245 int truncation_label;
247 /* Record the last truncation seen for this register. If truncation
248 is not a nop to this mode we might be able to save an explicit
249 truncation if we know that value already contains a truncated
252 ENUM_BITFIELD(machine_mode) truncated_to_mode : 8;
255 DEF_VEC_O(reg_stat_type);
256 DEF_VEC_ALLOC_O(reg_stat_type,heap);
258 static VEC(reg_stat_type,heap) *reg_stat;
260 /* Record the luid of the last insn that invalidated memory
261 (anything that writes memory, and subroutine calls, but not pushes). */
263 static int mem_last_set;
265 /* Record the luid of the last CALL_INSN
266 so we can tell whether a potential combination crosses any calls. */
268 static int last_call_luid;
270 /* When `subst' is called, this is the insn that is being modified
271 (by combining in a previous insn). The PATTERN of this insn
272 is still the old pattern partially modified and it should not be
273 looked at, but this may be used to examine the successors of the insn
274 to judge whether a simplification is valid. */
276 static rtx subst_insn;
278 /* This is the lowest LUID that `subst' is currently dealing with.
279 get_last_value will not return a value if the register was set at or
280 after this LUID. If not for this mechanism, we could get confused if
281 I2 or I1 in try_combine were an insn that used the old value of a register
282 to obtain a new value. In that case, we might erroneously get the
283 new value of the register when we wanted the old one. */
285 static int subst_low_luid;
287 /* This contains any hard registers that are used in newpat; reg_dead_at_p
288 must consider all these registers to be always live. */
290 static HARD_REG_SET newpat_used_regs;
292 /* This is an insn to which a LOG_LINKS entry has been added. If this
293 insn is the earlier than I2 or I3, combine should rescan starting at
296 static rtx added_links_insn;
298 /* Basic block in which we are performing combines. */
299 static basic_block this_basic_block;
300 static bool optimize_this_for_speed_p;
303 /* Length of the currently allocated uid_insn_cost array. */
305 static int max_uid_known;
307 /* The following array records the insn_rtx_cost for every insn
308 in the instruction stream. */
310 static int *uid_insn_cost;
312 /* The following array records the LOG_LINKS for every insn in the
313 instruction stream as struct insn_link pointers. */
317 struct insn_link *next;
320 static struct insn_link **uid_log_links;
322 #define INSN_COST(INSN) (uid_insn_cost[INSN_UID (INSN)])
323 #define LOG_LINKS(INSN) (uid_log_links[INSN_UID (INSN)])
325 #define FOR_EACH_LOG_LINK(L, INSN) \
326 for ((L) = LOG_LINKS (INSN); (L); (L) = (L)->next)
328 /* Links for LOG_LINKS are allocated from this obstack. */
330 static struct obstack insn_link_obstack;
332 /* Allocate a link. */
334 static inline struct insn_link *
335 alloc_insn_link (rtx insn, struct insn_link *next)
338 = (struct insn_link *) obstack_alloc (&insn_link_obstack,
339 sizeof (struct insn_link));
345 /* Incremented for each basic block. */
347 static int label_tick;
349 /* Reset to label_tick for each extended basic block in scanning order. */
351 static int label_tick_ebb_start;
353 /* Mode used to compute significance in reg_stat[].nonzero_bits. It is the
354 largest integer mode that can fit in HOST_BITS_PER_WIDE_INT. */
356 static enum machine_mode nonzero_bits_mode;
358 /* Nonzero when reg_stat[].nonzero_bits and reg_stat[].sign_bit_copies can
359 be safely used. It is zero while computing them and after combine has
360 completed. This former test prevents propagating values based on
361 previously set values, which can be incorrect if a variable is modified
364 static int nonzero_sign_valid;
367 /* Record one modification to rtl structure
368 to be undone by storing old_contents into *where. */
370 enum undo_kind { UNDO_RTX, UNDO_INT, UNDO_MODE, UNDO_LINKS };
376 union { rtx r; int i; enum machine_mode m; struct insn_link *l; } old_contents;
377 union { rtx *r; int *i; struct insn_link **l; } where;
380 /* Record a bunch of changes to be undone, up to MAX_UNDO of them.
381 num_undo says how many are currently recorded.
383 other_insn is nonzero if we have modified some other insn in the process
384 of working on subst_insn. It must be verified too. */
393 static struct undobuf undobuf;
395 /* Number of times the pseudo being substituted for
396 was found and replaced. */
398 static int n_occurrences;
400 static rtx reg_nonzero_bits_for_combine (const_rtx, enum machine_mode, const_rtx,
402 unsigned HOST_WIDE_INT,
403 unsigned HOST_WIDE_INT *);
404 static rtx reg_num_sign_bit_copies_for_combine (const_rtx, enum machine_mode, const_rtx,
406 unsigned int, unsigned int *);
407 static void do_SUBST (rtx *, rtx);
408 static void do_SUBST_INT (int *, int);
409 static void init_reg_last (void);
410 static void setup_incoming_promotions (rtx);
411 static void set_nonzero_bits_and_sign_copies (rtx, const_rtx, void *);
412 static int cant_combine_insn_p (rtx);
413 static int can_combine_p (rtx, rtx, rtx, rtx, rtx, rtx, rtx *, rtx *);
414 static int combinable_i3pat (rtx, rtx *, rtx, rtx, rtx, int, int, rtx *);
415 static int contains_muldiv (rtx);
416 static rtx try_combine (rtx, rtx, rtx, rtx, int *, rtx);
417 static void undo_all (void);
418 static void undo_commit (void);
419 static rtx *find_split_point (rtx *, rtx, bool);
420 static rtx subst (rtx, rtx, rtx, int, int, int);
421 static rtx combine_simplify_rtx (rtx, enum machine_mode, int, int);
422 static rtx simplify_if_then_else (rtx);
423 static rtx simplify_set (rtx);
424 static rtx simplify_logical (rtx);
425 static rtx expand_compound_operation (rtx);
426 static const_rtx expand_field_assignment (const_rtx);
427 static rtx make_extraction (enum machine_mode, rtx, HOST_WIDE_INT,
428 rtx, unsigned HOST_WIDE_INT, int, int, int);
429 static rtx extract_left_shift (rtx, int);
430 static rtx make_compound_operation (rtx, enum rtx_code);
431 static int get_pos_from_mask (unsigned HOST_WIDE_INT,
432 unsigned HOST_WIDE_INT *);
433 static rtx canon_reg_for_combine (rtx, rtx);
434 static rtx force_to_mode (rtx, enum machine_mode,
435 unsigned HOST_WIDE_INT, int);
436 static rtx if_then_else_cond (rtx, rtx *, rtx *);
437 static rtx known_cond (rtx, enum rtx_code, rtx, rtx);
438 static int rtx_equal_for_field_assignment_p (rtx, rtx);
439 static rtx make_field_assignment (rtx);
440 static rtx apply_distributive_law (rtx);
441 static rtx distribute_and_simplify_rtx (rtx, int);
442 static rtx simplify_and_const_int_1 (enum machine_mode, rtx,
443 unsigned HOST_WIDE_INT);
444 static rtx simplify_and_const_int (rtx, enum machine_mode, rtx,
445 unsigned HOST_WIDE_INT);
446 static int merge_outer_ops (enum rtx_code *, HOST_WIDE_INT *, enum rtx_code,
447 HOST_WIDE_INT, enum machine_mode, int *);
448 static rtx simplify_shift_const_1 (enum rtx_code, enum machine_mode, rtx, int);
449 static rtx simplify_shift_const (rtx, enum rtx_code, enum machine_mode, rtx,
451 static int recog_for_combine (rtx *, rtx, rtx *);
452 static rtx gen_lowpart_for_combine (enum machine_mode, rtx);
453 static enum rtx_code simplify_compare_const (enum rtx_code, rtx, rtx *);
454 static enum rtx_code simplify_comparison (enum rtx_code, rtx *, rtx *);
455 static void update_table_tick (rtx);
456 static void record_value_for_reg (rtx, rtx, rtx);
457 static void check_promoted_subreg (rtx, rtx);
458 static void record_dead_and_set_regs_1 (rtx, const_rtx, void *);
459 static void record_dead_and_set_regs (rtx);
460 static int get_last_value_validate (rtx *, rtx, int, int);
461 static rtx get_last_value (const_rtx);
462 static int use_crosses_set_p (const_rtx, int);
463 static void reg_dead_at_p_1 (rtx, const_rtx, void *);
464 static int reg_dead_at_p (rtx, rtx);
465 static void move_deaths (rtx, rtx, int, rtx, rtx *);
466 static int reg_bitfield_target_p (rtx, rtx);
467 static void distribute_notes (rtx, rtx, rtx, rtx, rtx, rtx, rtx);
468 static void distribute_links (struct insn_link *);
469 static void mark_used_regs_combine (rtx);
470 static void record_promoted_value (rtx, rtx);
471 static int unmentioned_reg_p_1 (rtx *, void *);
472 static bool unmentioned_reg_p (rtx, rtx);
473 static int record_truncated_value (rtx *, void *);
474 static void record_truncated_values (rtx *, void *);
475 static bool reg_truncated_to_mode (enum machine_mode, const_rtx);
476 static rtx gen_lowpart_or_truncate (enum machine_mode, rtx);
479 /* It is not safe to use ordinary gen_lowpart in combine.
480 See comments in gen_lowpart_for_combine. */
481 #undef RTL_HOOKS_GEN_LOWPART
482 #define RTL_HOOKS_GEN_LOWPART gen_lowpart_for_combine
484 /* Our implementation of gen_lowpart never emits a new pseudo. */
485 #undef RTL_HOOKS_GEN_LOWPART_NO_EMIT
486 #define RTL_HOOKS_GEN_LOWPART_NO_EMIT gen_lowpart_for_combine
488 #undef RTL_HOOKS_REG_NONZERO_REG_BITS
489 #define RTL_HOOKS_REG_NONZERO_REG_BITS reg_nonzero_bits_for_combine
491 #undef RTL_HOOKS_REG_NUM_SIGN_BIT_COPIES
492 #define RTL_HOOKS_REG_NUM_SIGN_BIT_COPIES reg_num_sign_bit_copies_for_combine
494 #undef RTL_HOOKS_REG_TRUNCATED_TO_MODE
495 #define RTL_HOOKS_REG_TRUNCATED_TO_MODE reg_truncated_to_mode
497 static const struct rtl_hooks combine_rtl_hooks = RTL_HOOKS_INITIALIZER;
500 /* Try to split PATTERN found in INSN. This returns NULL_RTX if
501 PATTERN can not be split. Otherwise, it returns an insn sequence.
502 This is a wrapper around split_insns which ensures that the
503 reg_stat vector is made larger if the splitter creates a new
507 combine_split_insns (rtx pattern, rtx insn)
512 ret = split_insns (pattern, insn);
513 nregs = max_reg_num ();
514 if (nregs > VEC_length (reg_stat_type, reg_stat))
515 VEC_safe_grow_cleared (reg_stat_type, heap, reg_stat, nregs);
519 /* This is used by find_single_use to locate an rtx in LOC that
520 contains exactly one use of DEST, which is typically either a REG
521 or CC0. It returns a pointer to the innermost rtx expression
522 containing DEST. Appearances of DEST that are being used to
523 totally replace it are not counted. */
526 find_single_use_1 (rtx dest, rtx *loc)
529 enum rtx_code code = GET_CODE (x);
547 /* If the destination is anything other than CC0, PC, a REG or a SUBREG
548 of a REG that occupies all of the REG, the insn uses DEST if
549 it is mentioned in the destination or the source. Otherwise, we
550 need just check the source. */
551 if (GET_CODE (SET_DEST (x)) != CC0
552 && GET_CODE (SET_DEST (x)) != PC
553 && !REG_P (SET_DEST (x))
554 && ! (GET_CODE (SET_DEST (x)) == SUBREG
555 && REG_P (SUBREG_REG (SET_DEST (x)))
556 && (((GET_MODE_SIZE (GET_MODE (SUBREG_REG (SET_DEST (x))))
557 + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD)
558 == ((GET_MODE_SIZE (GET_MODE (SET_DEST (x)))
559 + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD))))
562 return find_single_use_1 (dest, &SET_SRC (x));
566 return find_single_use_1 (dest, &XEXP (x, 0));
572 /* If it wasn't one of the common cases above, check each expression and
573 vector of this code. Look for a unique usage of DEST. */
575 fmt = GET_RTX_FORMAT (code);
576 for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
580 if (dest == XEXP (x, i)
581 || (REG_P (dest) && REG_P (XEXP (x, i))
582 && REGNO (dest) == REGNO (XEXP (x, i))))
585 this_result = find_single_use_1 (dest, &XEXP (x, i));
588 result = this_result;
589 else if (this_result)
590 /* Duplicate usage. */
593 else if (fmt[i] == 'E')
597 for (j = XVECLEN (x, i) - 1; j >= 0; j--)
599 if (XVECEXP (x, i, j) == dest
601 && REG_P (XVECEXP (x, i, j))
602 && REGNO (XVECEXP (x, i, j)) == REGNO (dest)))
605 this_result = find_single_use_1 (dest, &XVECEXP (x, i, j));
608 result = this_result;
609 else if (this_result)
619 /* See if DEST, produced in INSN, is used only a single time in the
620 sequel. If so, return a pointer to the innermost rtx expression in which
623 If PLOC is nonzero, *PLOC is set to the insn containing the single use.
625 If DEST is cc0_rtx, we look only at the next insn. In that case, we don't
626 care about REG_DEAD notes or LOG_LINKS.
628 Otherwise, we find the single use by finding an insn that has a
629 LOG_LINKS pointing at INSN and has a REG_DEAD note for DEST. If DEST is
630 only referenced once in that insn, we know that it must be the first
631 and last insn referencing DEST. */
634 find_single_use (rtx dest, rtx insn, rtx *ploc)
639 struct insn_link *link;
644 next = NEXT_INSN (insn);
646 || (!NONJUMP_INSN_P (next) && !JUMP_P (next)))
649 result = find_single_use_1 (dest, &PATTERN (next));
659 bb = BLOCK_FOR_INSN (insn);
660 for (next = NEXT_INSN (insn);
661 next && BLOCK_FOR_INSN (next) == bb;
662 next = NEXT_INSN (next))
663 if (INSN_P (next) && dead_or_set_p (next, dest))
665 FOR_EACH_LOG_LINK (link, next)
666 if (link->insn == insn)
671 result = find_single_use_1 (dest, &PATTERN (next));
681 /* Substitute NEWVAL, an rtx expression, into INTO, a place in some
682 insn. The substitution can be undone by undo_all. If INTO is already
683 set to NEWVAL, do not record this change. Because computing NEWVAL might
684 also call SUBST, we have to compute it before we put anything into
688 do_SUBST (rtx *into, rtx newval)
693 if (oldval == newval)
696 /* We'd like to catch as many invalid transformations here as
697 possible. Unfortunately, there are way too many mode changes
698 that are perfectly valid, so we'd waste too much effort for
699 little gain doing the checks here. Focus on catching invalid
700 transformations involving integer constants. */
701 if (GET_MODE_CLASS (GET_MODE (oldval)) == MODE_INT
702 && CONST_INT_P (newval))
704 /* Sanity check that we're replacing oldval with a CONST_INT
705 that is a valid sign-extension for the original mode. */
706 gcc_assert (INTVAL (newval)
707 == trunc_int_for_mode (INTVAL (newval), GET_MODE (oldval)));
709 /* Replacing the operand of a SUBREG or a ZERO_EXTEND with a
710 CONST_INT is not valid, because after the replacement, the
711 original mode would be gone. Unfortunately, we can't tell
712 when do_SUBST is called to replace the operand thereof, so we
713 perform this test on oldval instead, checking whether an
714 invalid replacement took place before we got here. */
715 gcc_assert (!(GET_CODE (oldval) == SUBREG
716 && CONST_INT_P (SUBREG_REG (oldval))));
717 gcc_assert (!(GET_CODE (oldval) == ZERO_EXTEND
718 && CONST_INT_P (XEXP (oldval, 0))));
722 buf = undobuf.frees, undobuf.frees = buf->next;
724 buf = XNEW (struct undo);
726 buf->kind = UNDO_RTX;
728 buf->old_contents.r = oldval;
731 buf->next = undobuf.undos, undobuf.undos = buf;
734 #define SUBST(INTO, NEWVAL) do_SUBST(&(INTO), (NEWVAL))
736 /* Similar to SUBST, but NEWVAL is an int expression. Note that substitution
737 for the value of a HOST_WIDE_INT value (including CONST_INT) is
741 do_SUBST_INT (int *into, int newval)
746 if (oldval == newval)
750 buf = undobuf.frees, undobuf.frees = buf->next;
752 buf = XNEW (struct undo);
754 buf->kind = UNDO_INT;
756 buf->old_contents.i = oldval;
759 buf->next = undobuf.undos, undobuf.undos = buf;
762 #define SUBST_INT(INTO, NEWVAL) do_SUBST_INT(&(INTO), (NEWVAL))
764 /* Similar to SUBST, but just substitute the mode. This is used when
765 changing the mode of a pseudo-register, so that any other
766 references to the entry in the regno_reg_rtx array will change as
770 do_SUBST_MODE (rtx *into, enum machine_mode newval)
773 enum machine_mode oldval = GET_MODE (*into);
775 if (oldval == newval)
779 buf = undobuf.frees, undobuf.frees = buf->next;
781 buf = XNEW (struct undo);
783 buf->kind = UNDO_MODE;
785 buf->old_contents.m = oldval;
786 adjust_reg_mode (*into, newval);
788 buf->next = undobuf.undos, undobuf.undos = buf;
791 #define SUBST_MODE(INTO, NEWVAL) do_SUBST_MODE(&(INTO), (NEWVAL))
793 /* Similar to SUBST, but NEWVAL is a LOG_LINKS expression. */
796 do_SUBST_LINK (struct insn_link **into, struct insn_link *newval)
799 struct insn_link * oldval = *into;
801 if (oldval == newval)
805 buf = undobuf.frees, undobuf.frees = buf->next;
807 buf = XNEW (struct undo);
809 buf->kind = UNDO_LINKS;
811 buf->old_contents.l = oldval;
814 buf->next = undobuf.undos, undobuf.undos = buf;
817 #define SUBST_LINK(oldval, newval) do_SUBST_LINK (&oldval, newval)
820 /* Subroutine of try_combine. Determine whether the replacement patterns
821 NEWPAT, NEWI2PAT and NEWOTHERPAT are cheaper according to insn_rtx_cost
822 than the original sequence I0, I1, I2, I3 and undobuf.other_insn. Note
823 that I0, I1 and/or NEWI2PAT may be NULL_RTX. Similarly, NEWOTHERPAT and
824 undobuf.other_insn may also both be NULL_RTX. Return false if the cost
825 of all the instructions can be estimated and the replacements are more
826 expensive than the original sequence. */
829 combine_validate_cost (rtx i0, rtx i1, rtx i2, rtx i3, rtx newpat,
830 rtx newi2pat, rtx newotherpat)
832 int i0_cost, i1_cost, i2_cost, i3_cost;
833 int new_i2_cost, new_i3_cost;
834 int old_cost, new_cost;
836 /* Lookup the original insn_rtx_costs. */
837 i2_cost = INSN_COST (i2);
838 i3_cost = INSN_COST (i3);
842 i1_cost = INSN_COST (i1);
845 i0_cost = INSN_COST (i0);
846 old_cost = (i0_cost > 0 && i1_cost > 0 && i2_cost > 0 && i3_cost > 0
847 ? i0_cost + i1_cost + i2_cost + i3_cost : 0);
851 old_cost = (i1_cost > 0 && i2_cost > 0 && i3_cost > 0
852 ? i1_cost + i2_cost + i3_cost : 0);
858 old_cost = (i2_cost > 0 && i3_cost > 0) ? i2_cost + i3_cost : 0;
859 i1_cost = i0_cost = 0;
862 /* Calculate the replacement insn_rtx_costs. */
863 new_i3_cost = insn_rtx_cost (newpat, optimize_this_for_speed_p);
866 new_i2_cost = insn_rtx_cost (newi2pat, optimize_this_for_speed_p);
867 new_cost = (new_i2_cost > 0 && new_i3_cost > 0)
868 ? new_i2_cost + new_i3_cost : 0;
872 new_cost = new_i3_cost;
876 if (undobuf.other_insn)
878 int old_other_cost, new_other_cost;
880 old_other_cost = INSN_COST (undobuf.other_insn);
881 new_other_cost = insn_rtx_cost (newotherpat, optimize_this_for_speed_p);
882 if (old_other_cost > 0 && new_other_cost > 0)
884 old_cost += old_other_cost;
885 new_cost += new_other_cost;
891 /* Disallow this combination if both new_cost and old_cost are greater than
892 zero, and new_cost is greater than old cost. */
893 if (old_cost > 0 && new_cost > old_cost)
900 "rejecting combination of insns %d, %d, %d and %d\n",
901 INSN_UID (i0), INSN_UID (i1), INSN_UID (i2),
903 fprintf (dump_file, "original costs %d + %d + %d + %d = %d\n",
904 i0_cost, i1_cost, i2_cost, i3_cost, old_cost);
909 "rejecting combination of insns %d, %d and %d\n",
910 INSN_UID (i1), INSN_UID (i2), INSN_UID (i3));
911 fprintf (dump_file, "original costs %d + %d + %d = %d\n",
912 i1_cost, i2_cost, i3_cost, old_cost);
917 "rejecting combination of insns %d and %d\n",
918 INSN_UID (i2), INSN_UID (i3));
919 fprintf (dump_file, "original costs %d + %d = %d\n",
920 i2_cost, i3_cost, old_cost);
925 fprintf (dump_file, "replacement costs %d + %d = %d\n",
926 new_i2_cost, new_i3_cost, new_cost);
929 fprintf (dump_file, "replacement cost %d\n", new_cost);
935 /* Update the uid_insn_cost array with the replacement costs. */
936 INSN_COST (i2) = new_i2_cost;
937 INSN_COST (i3) = new_i3_cost;
949 /* Delete any insns that copy a register to itself. */
952 delete_noop_moves (void)
959 for (insn = BB_HEAD (bb); insn != NEXT_INSN (BB_END (bb)); insn = next)
961 next = NEXT_INSN (insn);
962 if (INSN_P (insn) && noop_move_p (insn))
965 fprintf (dump_file, "deleting noop move %d\n", INSN_UID (insn));
967 delete_insn_and_edges (insn);
974 /* Fill in log links field for all insns. */
977 create_log_links (void)
981 df_ref *def_vec, *use_vec;
983 next_use = XCNEWVEC (rtx, max_reg_num ());
985 /* Pass through each block from the end, recording the uses of each
986 register and establishing log links when def is encountered.
987 Note that we do not clear next_use array in order to save time,
988 so we have to test whether the use is in the same basic block as def.
990 There are a few cases below when we do not consider the definition or
991 usage -- these are taken from original flow.c did. Don't ask me why it is
992 done this way; I don't know and if it works, I don't want to know. */
996 FOR_BB_INSNS_REVERSE (bb, insn)
998 if (!NONDEBUG_INSN_P (insn))
1001 /* Log links are created only once. */
1002 gcc_assert (!LOG_LINKS (insn));
1004 for (def_vec = DF_INSN_DEFS (insn); *def_vec; def_vec++)
1006 df_ref def = *def_vec;
1007 int regno = DF_REF_REGNO (def);
1010 if (!next_use[regno])
1013 /* Do not consider if it is pre/post modification in MEM. */
1014 if (DF_REF_FLAGS (def) & DF_REF_PRE_POST_MODIFY)
1017 /* Do not make the log link for frame pointer. */
1018 if ((regno == FRAME_POINTER_REGNUM
1019 && (! reload_completed || frame_pointer_needed))
1020 #if !HARD_FRAME_POINTER_IS_FRAME_POINTER
1021 || (regno == HARD_FRAME_POINTER_REGNUM
1022 && (! reload_completed || frame_pointer_needed))
1024 #if FRAME_POINTER_REGNUM != ARG_POINTER_REGNUM
1025 || (regno == ARG_POINTER_REGNUM && fixed_regs[regno])
1030 use_insn = next_use[regno];
1031 if (BLOCK_FOR_INSN (use_insn) == bb)
1035 We don't build a LOG_LINK for hard registers contained
1036 in ASM_OPERANDs. If these registers get replaced,
1037 we might wind up changing the semantics of the insn,
1038 even if reload can make what appear to be valid
1039 assignments later. */
1040 if (regno >= FIRST_PSEUDO_REGISTER
1041 || asm_noperands (PATTERN (use_insn)) < 0)
1043 /* Don't add duplicate links between instructions. */
1044 struct insn_link *links;
1045 FOR_EACH_LOG_LINK (links, use_insn)
1046 if (insn == links->insn)
1050 LOG_LINKS (use_insn)
1051 = alloc_insn_link (insn, LOG_LINKS (use_insn));
1054 next_use[regno] = NULL_RTX;
1057 for (use_vec = DF_INSN_USES (insn); *use_vec; use_vec++)
1059 df_ref use = *use_vec;
1060 int regno = DF_REF_REGNO (use);
1062 /* Do not consider the usage of the stack pointer
1063 by function call. */
1064 if (DF_REF_FLAGS (use) & DF_REF_CALL_STACK_USAGE)
1067 next_use[regno] = insn;
1075 /* Walk the LOG_LINKS of insn B to see if we find a reference to A. Return
1076 true if we found a LOG_LINK that proves that A feeds B. This only works
1077 if there are no instructions between A and B which could have a link
1078 depending on A, since in that case we would not record a link for B.
1079 We also check the implicit dependency created by a cc0 setter/user
1083 insn_a_feeds_b (rtx a, rtx b)
1085 struct insn_link *links;
1086 FOR_EACH_LOG_LINK (links, b)
1087 if (links->insn == a)
1096 /* Main entry point for combiner. F is the first insn of the function.
1097 NREGS is the first unused pseudo-reg number.
1099 Return nonzero if the combiner has turned an indirect jump
1100 instruction into a direct jump. */
1102 combine_instructions (rtx f, unsigned int nregs)
1108 struct insn_link *links, *nextlinks;
1110 basic_block last_bb;
1112 int new_direct_jump_p = 0;
1114 for (first = f; first && !INSN_P (first); )
1115 first = NEXT_INSN (first);
1119 combine_attempts = 0;
1122 combine_successes = 0;
1124 rtl_hooks = combine_rtl_hooks;
1126 VEC_safe_grow_cleared (reg_stat_type, heap, reg_stat, nregs);
1128 init_recog_no_volatile ();
1130 /* Allocate array for insn info. */
1131 max_uid_known = get_max_uid ();
1132 uid_log_links = XCNEWVEC (struct insn_link *, max_uid_known + 1);
1133 uid_insn_cost = XCNEWVEC (int, max_uid_known + 1);
1134 gcc_obstack_init (&insn_link_obstack);
1136 nonzero_bits_mode = mode_for_size (HOST_BITS_PER_WIDE_INT, MODE_INT, 0);
1138 /* Don't use reg_stat[].nonzero_bits when computing it. This can cause
1139 problems when, for example, we have j <<= 1 in a loop. */
1141 nonzero_sign_valid = 0;
1142 label_tick = label_tick_ebb_start = 1;
1144 /* Scan all SETs and see if we can deduce anything about what
1145 bits are known to be zero for some registers and how many copies
1146 of the sign bit are known to exist for those registers.
1148 Also set any known values so that we can use it while searching
1149 for what bits are known to be set. */
1151 setup_incoming_promotions (first);
1152 /* Allow the entry block and the first block to fall into the same EBB.
1153 Conceptually the incoming promotions are assigned to the entry block. */
1154 last_bb = ENTRY_BLOCK_PTR;
1156 create_log_links ();
1157 FOR_EACH_BB (this_basic_block)
1159 optimize_this_for_speed_p = optimize_bb_for_speed_p (this_basic_block);
1164 if (!single_pred_p (this_basic_block)
1165 || single_pred (this_basic_block) != last_bb)
1166 label_tick_ebb_start = label_tick;
1167 last_bb = this_basic_block;
1169 FOR_BB_INSNS (this_basic_block, insn)
1170 if (INSN_P (insn) && BLOCK_FOR_INSN (insn))
1176 subst_low_luid = DF_INSN_LUID (insn);
1179 note_stores (PATTERN (insn), set_nonzero_bits_and_sign_copies,
1181 record_dead_and_set_regs (insn);
1184 for (links = REG_NOTES (insn); links; links = XEXP (links, 1))
1185 if (REG_NOTE_KIND (links) == REG_INC)
1186 set_nonzero_bits_and_sign_copies (XEXP (links, 0), NULL_RTX,
1190 /* Record the current insn_rtx_cost of this instruction. */
1191 if (NONJUMP_INSN_P (insn))
1192 INSN_COST (insn) = insn_rtx_cost (PATTERN (insn),
1193 optimize_this_for_speed_p);
1195 fprintf(dump_file, "insn_cost %d: %d\n",
1196 INSN_UID (insn), INSN_COST (insn));
1200 nonzero_sign_valid = 1;
1202 /* Now scan all the insns in forward order. */
1203 label_tick = label_tick_ebb_start = 1;
1205 setup_incoming_promotions (first);
1206 last_bb = ENTRY_BLOCK_PTR;
1208 FOR_EACH_BB (this_basic_block)
1210 rtx last_combined_insn = NULL_RTX;
1211 optimize_this_for_speed_p = optimize_bb_for_speed_p (this_basic_block);
1216 if (!single_pred_p (this_basic_block)
1217 || single_pred (this_basic_block) != last_bb)
1218 label_tick_ebb_start = label_tick;
1219 last_bb = this_basic_block;
1221 rtl_profile_for_bb (this_basic_block);
1222 for (insn = BB_HEAD (this_basic_block);
1223 insn != NEXT_INSN (BB_END (this_basic_block));
1224 insn = next ? next : NEXT_INSN (insn))
1227 if (NONDEBUG_INSN_P (insn))
1229 while (last_combined_insn
1230 && INSN_DELETED_P (last_combined_insn))
1231 last_combined_insn = PREV_INSN (last_combined_insn);
1232 if (last_combined_insn == NULL_RTX
1233 || BARRIER_P (last_combined_insn)
1234 || BLOCK_FOR_INSN (last_combined_insn) != this_basic_block
1235 || DF_INSN_LUID (last_combined_insn) <= DF_INSN_LUID (insn))
1236 last_combined_insn = insn;
1238 /* See if we know about function return values before this
1239 insn based upon SUBREG flags. */
1240 check_promoted_subreg (insn, PATTERN (insn));
1242 /* See if we can find hardregs and subreg of pseudos in
1243 narrower modes. This could help turning TRUNCATEs
1245 note_uses (&PATTERN (insn), record_truncated_values, NULL);
1247 /* Try this insn with each insn it links back to. */
1249 FOR_EACH_LOG_LINK (links, insn)
1250 if ((next = try_combine (insn, links->insn, NULL_RTX,
1251 NULL_RTX, &new_direct_jump_p,
1252 last_combined_insn)) != 0)
1255 /* Try each sequence of three linked insns ending with this one. */
1257 FOR_EACH_LOG_LINK (links, insn)
1259 rtx link = links->insn;
1261 /* If the linked insn has been replaced by a note, then there
1262 is no point in pursuing this chain any further. */
1266 FOR_EACH_LOG_LINK (nextlinks, link)
1267 if ((next = try_combine (insn, link, nextlinks->insn,
1268 NULL_RTX, &new_direct_jump_p,
1269 last_combined_insn)) != 0)
1274 /* Try to combine a jump insn that uses CC0
1275 with a preceding insn that sets CC0, and maybe with its
1276 logical predecessor as well.
1277 This is how we make decrement-and-branch insns.
1278 We need this special code because data flow connections
1279 via CC0 do not get entered in LOG_LINKS. */
1282 && (prev = prev_nonnote_insn (insn)) != 0
1283 && NONJUMP_INSN_P (prev)
1284 && sets_cc0_p (PATTERN (prev)))
1286 if ((next = try_combine (insn, prev, NULL_RTX, NULL_RTX,
1288 last_combined_insn)) != 0)
1291 FOR_EACH_LOG_LINK (nextlinks, prev)
1292 if ((next = try_combine (insn, prev, nextlinks->insn,
1293 NULL_RTX, &new_direct_jump_p,
1294 last_combined_insn)) != 0)
1298 /* Do the same for an insn that explicitly references CC0. */
1299 if (NONJUMP_INSN_P (insn)
1300 && (prev = prev_nonnote_insn (insn)) != 0
1301 && NONJUMP_INSN_P (prev)
1302 && sets_cc0_p (PATTERN (prev))
1303 && GET_CODE (PATTERN (insn)) == SET
1304 && reg_mentioned_p (cc0_rtx, SET_SRC (PATTERN (insn))))
1306 if ((next = try_combine (insn, prev, NULL_RTX, NULL_RTX,
1308 last_combined_insn)) != 0)
1311 FOR_EACH_LOG_LINK (nextlinks, prev)
1312 if ((next = try_combine (insn, prev, nextlinks->insn,
1313 NULL_RTX, &new_direct_jump_p,
1314 last_combined_insn)) != 0)
1318 /* Finally, see if any of the insns that this insn links to
1319 explicitly references CC0. If so, try this insn, that insn,
1320 and its predecessor if it sets CC0. */
1321 FOR_EACH_LOG_LINK (links, insn)
1322 if (NONJUMP_INSN_P (links->insn)
1323 && GET_CODE (PATTERN (links->insn)) == SET
1324 && reg_mentioned_p (cc0_rtx, SET_SRC (PATTERN (links->insn)))
1325 && (prev = prev_nonnote_insn (links->insn)) != 0
1326 && NONJUMP_INSN_P (prev)
1327 && sets_cc0_p (PATTERN (prev))
1328 && (next = try_combine (insn, links->insn,
1329 prev, NULL_RTX, &new_direct_jump_p,
1330 last_combined_insn)) != 0)
1334 /* Try combining an insn with two different insns whose results it
1336 FOR_EACH_LOG_LINK (links, insn)
1337 for (nextlinks = links->next; nextlinks;
1338 nextlinks = nextlinks->next)
1339 if ((next = try_combine (insn, links->insn,
1340 nextlinks->insn, NULL_RTX,
1342 last_combined_insn)) != 0)
1345 /* Try four-instruction combinations. */
1346 FOR_EACH_LOG_LINK (links, insn)
1348 struct insn_link *next1;
1349 rtx link = links->insn;
1351 /* If the linked insn has been replaced by a note, then there
1352 is no point in pursuing this chain any further. */
1356 FOR_EACH_LOG_LINK (next1, link)
1358 rtx link1 = next1->insn;
1361 /* I0 -> I1 -> I2 -> I3. */
1362 FOR_EACH_LOG_LINK (nextlinks, link1)
1363 if ((next = try_combine (insn, link, link1,
1366 last_combined_insn)) != 0)
1368 /* I0, I1 -> I2, I2 -> I3. */
1369 for (nextlinks = next1->next; nextlinks;
1370 nextlinks = nextlinks->next)
1371 if ((next = try_combine (insn, link, link1,
1374 last_combined_insn)) != 0)
1378 for (next1 = links->next; next1; next1 = next1->next)
1380 rtx link1 = next1->insn;
1383 /* I0 -> I2; I1, I2 -> I3. */
1384 FOR_EACH_LOG_LINK (nextlinks, link)
1385 if ((next = try_combine (insn, link, link1,
1388 last_combined_insn)) != 0)
1390 /* I0 -> I1; I1, I2 -> I3. */
1391 FOR_EACH_LOG_LINK (nextlinks, link1)
1392 if ((next = try_combine (insn, link, link1,
1395 last_combined_insn)) != 0)
1400 /* Try this insn with each REG_EQUAL note it links back to. */
1401 FOR_EACH_LOG_LINK (links, insn)
1404 rtx temp = links->insn;
1405 if ((set = single_set (temp)) != 0
1406 && (note = find_reg_equal_equiv_note (temp)) != 0
1407 && (note = XEXP (note, 0), GET_CODE (note)) != EXPR_LIST
1408 /* Avoid using a register that may already been marked
1409 dead by an earlier instruction. */
1410 && ! unmentioned_reg_p (note, SET_SRC (set))
1411 && (GET_MODE (note) == VOIDmode
1412 ? SCALAR_INT_MODE_P (GET_MODE (SET_DEST (set)))
1413 : GET_MODE (SET_DEST (set)) == GET_MODE (note)))
1415 /* Temporarily replace the set's source with the
1416 contents of the REG_EQUAL note. The insn will
1417 be deleted or recognized by try_combine. */
1418 rtx orig = SET_SRC (set);
1419 SET_SRC (set) = note;
1421 i2mod_old_rhs = copy_rtx (orig);
1422 i2mod_new_rhs = copy_rtx (note);
1423 next = try_combine (insn, i2mod, NULL_RTX, NULL_RTX,
1425 last_combined_insn);
1429 SET_SRC (set) = orig;
1434 record_dead_and_set_regs (insn);
1442 default_rtl_profile ();
1444 new_direct_jump_p |= purge_all_dead_edges ();
1445 delete_noop_moves ();
1448 obstack_free (&insn_link_obstack, NULL);
1449 free (uid_log_links);
1450 free (uid_insn_cost);
1451 VEC_free (reg_stat_type, heap, reg_stat);
1454 struct undo *undo, *next;
1455 for (undo = undobuf.frees; undo; undo = next)
1463 total_attempts += combine_attempts;
1464 total_merges += combine_merges;
1465 total_extras += combine_extras;
1466 total_successes += combine_successes;
1468 nonzero_sign_valid = 0;
1469 rtl_hooks = general_rtl_hooks;
1471 /* Make recognizer allow volatile MEMs again. */
1474 return new_direct_jump_p;
1477 /* Wipe the last_xxx fields of reg_stat in preparation for another pass. */
1480 init_reg_last (void)
1485 FOR_EACH_VEC_ELT (reg_stat_type, reg_stat, i, p)
1486 memset (p, 0, offsetof (reg_stat_type, sign_bit_copies));
1489 /* Set up any promoted values for incoming argument registers. */
1492 setup_incoming_promotions (rtx first)
1495 bool strictly_local = false;
1497 for (arg = DECL_ARGUMENTS (current_function_decl); arg;
1498 arg = DECL_CHAIN (arg))
1500 rtx x, reg = DECL_INCOMING_RTL (arg);
1502 enum machine_mode mode1, mode2, mode3, mode4;
1504 /* Only continue if the incoming argument is in a register. */
1508 /* Determine, if possible, whether all call sites of the current
1509 function lie within the current compilation unit. (This does
1510 take into account the exporting of a function via taking its
1511 address, and so forth.) */
1512 strictly_local = cgraph_local_info (current_function_decl)->local;
1514 /* The mode and signedness of the argument before any promotions happen
1515 (equal to the mode of the pseudo holding it at that stage). */
1516 mode1 = TYPE_MODE (TREE_TYPE (arg));
1517 uns1 = TYPE_UNSIGNED (TREE_TYPE (arg));
1519 /* The mode and signedness of the argument after any source language and
1520 TARGET_PROMOTE_PROTOTYPES-driven promotions. */
1521 mode2 = TYPE_MODE (DECL_ARG_TYPE (arg));
1522 uns3 = TYPE_UNSIGNED (DECL_ARG_TYPE (arg));
1524 /* The mode and signedness of the argument as it is actually passed,
1525 after any TARGET_PROMOTE_FUNCTION_ARGS-driven ABI promotions. */
1526 mode3 = promote_function_mode (DECL_ARG_TYPE (arg), mode2, &uns3,
1527 TREE_TYPE (cfun->decl), 0);
1529 /* The mode of the register in which the argument is being passed. */
1530 mode4 = GET_MODE (reg);
1532 /* Eliminate sign extensions in the callee when:
1533 (a) A mode promotion has occurred; */
1536 /* (b) The mode of the register is the same as the mode of
1537 the argument as it is passed; */
1540 /* (c) There's no language level extension; */
1543 /* (c.1) All callers are from the current compilation unit. If that's
1544 the case we don't have to rely on an ABI, we only have to know
1545 what we're generating right now, and we know that we will do the
1546 mode1 to mode2 promotion with the given sign. */
1547 else if (!strictly_local)
1549 /* (c.2) The combination of the two promotions is useful. This is
1550 true when the signs match, or if the first promotion is unsigned.
1551 In the later case, (sign_extend (zero_extend x)) is the same as
1552 (zero_extend (zero_extend x)), so make sure to force UNS3 true. */
1558 /* Record that the value was promoted from mode1 to mode3,
1559 so that any sign extension at the head of the current
1560 function may be eliminated. */
1561 x = gen_rtx_CLOBBER (mode1, const0_rtx);
1562 x = gen_rtx_fmt_e ((uns3 ? ZERO_EXTEND : SIGN_EXTEND), mode3, x);
1563 record_value_for_reg (reg, first, x);
1567 /* Called via note_stores. If X is a pseudo that is narrower than
1568 HOST_BITS_PER_WIDE_INT and is being set, record what bits are known zero.
1570 If we are setting only a portion of X and we can't figure out what
1571 portion, assume all bits will be used since we don't know what will
1574 Similarly, set how many bits of X are known to be copies of the sign bit
1575 at all locations in the function. This is the smallest number implied
1579 set_nonzero_bits_and_sign_copies (rtx x, const_rtx set, void *data)
1581 rtx insn = (rtx) data;
1585 && REGNO (x) >= FIRST_PSEUDO_REGISTER
1586 /* If this register is undefined at the start of the file, we can't
1587 say what its contents were. */
1588 && ! REGNO_REG_SET_P
1589 (DF_LR_IN (ENTRY_BLOCK_PTR->next_bb), REGNO (x))
1590 && HWI_COMPUTABLE_MODE_P (GET_MODE (x)))
1592 reg_stat_type *rsp = VEC_index (reg_stat_type, reg_stat, REGNO (x));
1594 if (set == 0 || GET_CODE (set) == CLOBBER)
1596 rsp->nonzero_bits = GET_MODE_MASK (GET_MODE (x));
1597 rsp->sign_bit_copies = 1;
1601 /* If this register is being initialized using itself, and the
1602 register is uninitialized in this basic block, and there are
1603 no LOG_LINKS which set the register, then part of the
1604 register is uninitialized. In that case we can't assume
1605 anything about the number of nonzero bits.
1607 ??? We could do better if we checked this in
1608 reg_{nonzero_bits,num_sign_bit_copies}_for_combine. Then we
1609 could avoid making assumptions about the insn which initially
1610 sets the register, while still using the information in other
1611 insns. We would have to be careful to check every insn
1612 involved in the combination. */
1615 && reg_referenced_p (x, PATTERN (insn))
1616 && !REGNO_REG_SET_P (DF_LR_IN (BLOCK_FOR_INSN (insn)),
1619 struct insn_link *link;
1621 FOR_EACH_LOG_LINK (link, insn)
1622 if (dead_or_set_p (link->insn, x))
1626 rsp->nonzero_bits = GET_MODE_MASK (GET_MODE (x));
1627 rsp->sign_bit_copies = 1;
1632 /* If this is a complex assignment, see if we can convert it into a
1633 simple assignment. */
1634 set = expand_field_assignment (set);
1636 /* If this is a simple assignment, or we have a paradoxical SUBREG,
1637 set what we know about X. */
1639 if (SET_DEST (set) == x
1640 || (paradoxical_subreg_p (SET_DEST (set))
1641 && SUBREG_REG (SET_DEST (set)) == x))
1643 rtx src = SET_SRC (set);
1645 #ifdef SHORT_IMMEDIATES_SIGN_EXTEND
1646 /* If X is narrower than a word and SRC is a non-negative
1647 constant that would appear negative in the mode of X,
1648 sign-extend it for use in reg_stat[].nonzero_bits because some
1649 machines (maybe most) will actually do the sign-extension
1650 and this is the conservative approach.
1652 ??? For 2.5, try to tighten up the MD files in this regard
1653 instead of this kludge. */
1655 if (GET_MODE_PRECISION (GET_MODE (x)) < BITS_PER_WORD
1656 && CONST_INT_P (src)
1658 && val_signbit_known_set_p (GET_MODE (x), INTVAL (src)))
1659 src = GEN_INT (INTVAL (src) | ~GET_MODE_MASK (GET_MODE (x)));
1662 /* Don't call nonzero_bits if it cannot change anything. */
1663 if (rsp->nonzero_bits != ~(unsigned HOST_WIDE_INT) 0)
1664 rsp->nonzero_bits |= nonzero_bits (src, nonzero_bits_mode);
1665 num = num_sign_bit_copies (SET_SRC (set), GET_MODE (x));
1666 if (rsp->sign_bit_copies == 0
1667 || rsp->sign_bit_copies > num)
1668 rsp->sign_bit_copies = num;
1672 rsp->nonzero_bits = GET_MODE_MASK (GET_MODE (x));
1673 rsp->sign_bit_copies = 1;
1678 /* See if INSN can be combined into I3. PRED, PRED2, SUCC and SUCC2 are
1679 optionally insns that were previously combined into I3 or that will be
1680 combined into the merger of INSN and I3. The order is PRED, PRED2,
1681 INSN, SUCC, SUCC2, I3.
1683 Return 0 if the combination is not allowed for any reason.
1685 If the combination is allowed, *PDEST will be set to the single
1686 destination of INSN and *PSRC to the single source, and this function
1690 can_combine_p (rtx insn, rtx i3, rtx pred ATTRIBUTE_UNUSED,
1691 rtx pred2 ATTRIBUTE_UNUSED, rtx succ, rtx succ2,
1692 rtx *pdest, rtx *psrc)
1701 bool all_adjacent = true;
1707 if (next_active_insn (succ2) != i3)
1708 all_adjacent = false;
1709 if (next_active_insn (succ) != succ2)
1710 all_adjacent = false;
1712 else if (next_active_insn (succ) != i3)
1713 all_adjacent = false;
1714 if (next_active_insn (insn) != succ)
1715 all_adjacent = false;
1717 else if (next_active_insn (insn) != i3)
1718 all_adjacent = false;
1720 /* Can combine only if previous insn is a SET of a REG, a SUBREG or CC0.
1721 or a PARALLEL consisting of such a SET and CLOBBERs.
1723 If INSN has CLOBBER parallel parts, ignore them for our processing.
1724 By definition, these happen during the execution of the insn. When it
1725 is merged with another insn, all bets are off. If they are, in fact,
1726 needed and aren't also supplied in I3, they may be added by
1727 recog_for_combine. Otherwise, it won't match.
1729 We can also ignore a SET whose SET_DEST is mentioned in a REG_UNUSED
1732 Get the source and destination of INSN. If more than one, can't
1735 if (GET_CODE (PATTERN (insn)) == SET)
1736 set = PATTERN (insn);
1737 else if (GET_CODE (PATTERN (insn)) == PARALLEL
1738 && GET_CODE (XVECEXP (PATTERN (insn), 0, 0)) == SET)
1740 for (i = 0; i < XVECLEN (PATTERN (insn), 0); i++)
1742 rtx elt = XVECEXP (PATTERN (insn), 0, i);
1744 switch (GET_CODE (elt))
1746 /* This is important to combine floating point insns
1747 for the SH4 port. */
1749 /* Combining an isolated USE doesn't make sense.
1750 We depend here on combinable_i3pat to reject them. */
1751 /* The code below this loop only verifies that the inputs of
1752 the SET in INSN do not change. We call reg_set_between_p
1753 to verify that the REG in the USE does not change between
1755 If the USE in INSN was for a pseudo register, the matching
1756 insn pattern will likely match any register; combining this
1757 with any other USE would only be safe if we knew that the
1758 used registers have identical values, or if there was
1759 something to tell them apart, e.g. different modes. For
1760 now, we forgo such complicated tests and simply disallow
1761 combining of USES of pseudo registers with any other USE. */
1762 if (REG_P (XEXP (elt, 0))
1763 && GET_CODE (PATTERN (i3)) == PARALLEL)
1765 rtx i3pat = PATTERN (i3);
1766 int i = XVECLEN (i3pat, 0) - 1;
1767 unsigned int regno = REGNO (XEXP (elt, 0));
1771 rtx i3elt = XVECEXP (i3pat, 0, i);
1773 if (GET_CODE (i3elt) == USE
1774 && REG_P (XEXP (i3elt, 0))
1775 && (REGNO (XEXP (i3elt, 0)) == regno
1776 ? reg_set_between_p (XEXP (elt, 0),
1777 PREV_INSN (insn), i3)
1778 : regno >= FIRST_PSEUDO_REGISTER))
1785 /* We can ignore CLOBBERs. */
1790 /* Ignore SETs whose result isn't used but not those that
1791 have side-effects. */
1792 if (find_reg_note (insn, REG_UNUSED, SET_DEST (elt))
1793 && insn_nothrow_p (insn)
1794 && !side_effects_p (elt))
1797 /* If we have already found a SET, this is a second one and
1798 so we cannot combine with this insn. */
1806 /* Anything else means we can't combine. */
1812 /* If SET_SRC is an ASM_OPERANDS we can't throw away these CLOBBERs,
1813 so don't do anything with it. */
1814 || GET_CODE (SET_SRC (set)) == ASM_OPERANDS)
1823 set = expand_field_assignment (set);
1824 src = SET_SRC (set), dest = SET_DEST (set);
1826 /* Don't eliminate a store in the stack pointer. */
1827 if (dest == stack_pointer_rtx
1828 /* Don't combine with an insn that sets a register to itself if it has
1829 a REG_EQUAL note. This may be part of a LIBCALL sequence. */
1830 || (rtx_equal_p (src, dest) && find_reg_note (insn, REG_EQUAL, NULL_RTX))
1831 /* Can't merge an ASM_OPERANDS. */
1832 || GET_CODE (src) == ASM_OPERANDS
1833 /* Can't merge a function call. */
1834 || GET_CODE (src) == CALL
1835 /* Don't eliminate a function call argument. */
1837 && (find_reg_fusage (i3, USE, dest)
1839 && REGNO (dest) < FIRST_PSEUDO_REGISTER
1840 && global_regs[REGNO (dest)])))
1841 /* Don't substitute into an incremented register. */
1842 || FIND_REG_INC_NOTE (i3, dest)
1843 || (succ && FIND_REG_INC_NOTE (succ, dest))
1844 || (succ2 && FIND_REG_INC_NOTE (succ2, dest))
1845 /* Don't substitute into a non-local goto, this confuses CFG. */
1846 || (JUMP_P (i3) && find_reg_note (i3, REG_NON_LOCAL_GOTO, NULL_RTX))
1847 /* Make sure that DEST is not used after SUCC but before I3. */
1850 && (reg_used_between_p (dest, succ2, i3)
1851 || reg_used_between_p (dest, succ, succ2)))
1852 || (!succ2 && succ && reg_used_between_p (dest, succ, i3))))
1853 /* Make sure that the value that is to be substituted for the register
1854 does not use any registers whose values alter in between. However,
1855 If the insns are adjacent, a use can't cross a set even though we
1856 think it might (this can happen for a sequence of insns each setting
1857 the same destination; last_set of that register might point to
1858 a NOTE). If INSN has a REG_EQUIV note, the register is always
1859 equivalent to the memory so the substitution is valid even if there
1860 are intervening stores. Also, don't move a volatile asm or
1861 UNSPEC_VOLATILE across any other insns. */
1864 || ! find_reg_note (insn, REG_EQUIV, src))
1865 && use_crosses_set_p (src, DF_INSN_LUID (insn)))
1866 || (GET_CODE (src) == ASM_OPERANDS && MEM_VOLATILE_P (src))
1867 || GET_CODE (src) == UNSPEC_VOLATILE))
1868 /* Don't combine across a CALL_INSN, because that would possibly
1869 change whether the life span of some REGs crosses calls or not,
1870 and it is a pain to update that information.
1871 Exception: if source is a constant, moving it later can't hurt.
1872 Accept that as a special case. */
1873 || (DF_INSN_LUID (insn) < last_call_luid && ! CONSTANT_P (src)))
1876 /* DEST must either be a REG or CC0. */
1879 /* If register alignment is being enforced for multi-word items in all
1880 cases except for parameters, it is possible to have a register copy
1881 insn referencing a hard register that is not allowed to contain the
1882 mode being copied and which would not be valid as an operand of most
1883 insns. Eliminate this problem by not combining with such an insn.
1885 Also, on some machines we don't want to extend the life of a hard
1889 && ((REGNO (dest) < FIRST_PSEUDO_REGISTER
1890 && ! HARD_REGNO_MODE_OK (REGNO (dest), GET_MODE (dest)))
1891 /* Don't extend the life of a hard register unless it is
1892 user variable (if we have few registers) or it can't
1893 fit into the desired register (meaning something special
1895 Also avoid substituting a return register into I3, because
1896 reload can't handle a conflict with constraints of other
1898 || (REGNO (src) < FIRST_PSEUDO_REGISTER
1899 && ! HARD_REGNO_MODE_OK (REGNO (src), GET_MODE (src)))))
1902 else if (GET_CODE (dest) != CC0)
1906 if (GET_CODE (PATTERN (i3)) == PARALLEL)
1907 for (i = XVECLEN (PATTERN (i3), 0) - 1; i >= 0; i--)
1908 if (GET_CODE (XVECEXP (PATTERN (i3), 0, i)) == CLOBBER)
1910 /* Don't substitute for a register intended as a clobberable
1912 rtx reg = XEXP (XVECEXP (PATTERN (i3), 0, i), 0);
1913 if (rtx_equal_p (reg, dest))
1916 /* If the clobber represents an earlyclobber operand, we must not
1917 substitute an expression containing the clobbered register.
1918 As we do not analyze the constraint strings here, we have to
1919 make the conservative assumption. However, if the register is
1920 a fixed hard reg, the clobber cannot represent any operand;
1921 we leave it up to the machine description to either accept or
1922 reject use-and-clobber patterns. */
1924 || REGNO (reg) >= FIRST_PSEUDO_REGISTER
1925 || !fixed_regs[REGNO (reg)])
1926 if (reg_overlap_mentioned_p (reg, src))
1930 /* If INSN contains anything volatile, or is an `asm' (whether volatile
1931 or not), reject, unless nothing volatile comes between it and I3 */
1933 if (GET_CODE (src) == ASM_OPERANDS || volatile_refs_p (src))
1935 /* Make sure neither succ nor succ2 contains a volatile reference. */
1936 if (succ2 != 0 && volatile_refs_p (PATTERN (succ2)))
1938 if (succ != 0 && volatile_refs_p (PATTERN (succ)))
1940 /* We'll check insns between INSN and I3 below. */
1943 /* If INSN is an asm, and DEST is a hard register, reject, since it has
1944 to be an explicit register variable, and was chosen for a reason. */
1946 if (GET_CODE (src) == ASM_OPERANDS
1947 && REG_P (dest) && REGNO (dest) < FIRST_PSEUDO_REGISTER)
1950 /* If there are any volatile insns between INSN and I3, reject, because
1951 they might affect machine state. */
1953 for (p = NEXT_INSN (insn); p != i3; p = NEXT_INSN (p))
1954 if (INSN_P (p) && p != succ && p != succ2 && volatile_insn_p (PATTERN (p)))
1957 /* If INSN contains an autoincrement or autodecrement, make sure that
1958 register is not used between there and I3, and not already used in
1959 I3 either. Neither must it be used in PRED or SUCC, if they exist.
1960 Also insist that I3 not be a jump; if it were one
1961 and the incremented register were spilled, we would lose. */
1964 for (link = REG_NOTES (insn); link; link = XEXP (link, 1))
1965 if (REG_NOTE_KIND (link) == REG_INC
1967 || reg_used_between_p (XEXP (link, 0), insn, i3)
1968 || (pred != NULL_RTX
1969 && reg_overlap_mentioned_p (XEXP (link, 0), PATTERN (pred)))
1970 || (pred2 != NULL_RTX
1971 && reg_overlap_mentioned_p (XEXP (link, 0), PATTERN (pred2)))
1972 || (succ != NULL_RTX
1973 && reg_overlap_mentioned_p (XEXP (link, 0), PATTERN (succ)))
1974 || (succ2 != NULL_RTX
1975 && reg_overlap_mentioned_p (XEXP (link, 0), PATTERN (succ2)))
1976 || reg_overlap_mentioned_p (XEXP (link, 0), PATTERN (i3))))
1981 /* Don't combine an insn that follows a CC0-setting insn.
1982 An insn that uses CC0 must not be separated from the one that sets it.
1983 We do, however, allow I2 to follow a CC0-setting insn if that insn
1984 is passed as I1; in that case it will be deleted also.
1985 We also allow combining in this case if all the insns are adjacent
1986 because that would leave the two CC0 insns adjacent as well.
1987 It would be more logical to test whether CC0 occurs inside I1 or I2,
1988 but that would be much slower, and this ought to be equivalent. */
1990 p = prev_nonnote_insn (insn);
1991 if (p && p != pred && NONJUMP_INSN_P (p) && sets_cc0_p (PATTERN (p))
1996 /* If we get here, we have passed all the tests and the combination is
2005 /* LOC is the location within I3 that contains its pattern or the component
2006 of a PARALLEL of the pattern. We validate that it is valid for combining.
2008 One problem is if I3 modifies its output, as opposed to replacing it
2009 entirely, we can't allow the output to contain I2DEST, I1DEST or I0DEST as
2010 doing so would produce an insn that is not equivalent to the original insns.
2014 (set (reg:DI 101) (reg:DI 100))
2015 (set (subreg:SI (reg:DI 101) 0) <foo>)
2017 This is NOT equivalent to:
2019 (parallel [(set (subreg:SI (reg:DI 100) 0) <foo>)
2020 (set (reg:DI 101) (reg:DI 100))])
2022 Not only does this modify 100 (in which case it might still be valid
2023 if 100 were dead in I2), it sets 101 to the ORIGINAL value of 100.
2025 We can also run into a problem if I2 sets a register that I1
2026 uses and I1 gets directly substituted into I3 (not via I2). In that
2027 case, we would be getting the wrong value of I2DEST into I3, so we
2028 must reject the combination. This case occurs when I2 and I1 both
2029 feed into I3, rather than when I1 feeds into I2, which feeds into I3.
2030 If I1_NOT_IN_SRC is nonzero, it means that finding I1 in the source
2031 of a SET must prevent combination from occurring. The same situation
2032 can occur for I0, in which case I0_NOT_IN_SRC is set.
2034 Before doing the above check, we first try to expand a field assignment
2035 into a set of logical operations.
2037 If PI3_DEST_KILLED is nonzero, it is a pointer to a location in which
2038 we place a register that is both set and used within I3. If more than one
2039 such register is detected, we fail.
2041 Return 1 if the combination is valid, zero otherwise. */
2044 combinable_i3pat (rtx i3, rtx *loc, rtx i2dest, rtx i1dest, rtx i0dest,
2045 int i1_not_in_src, int i0_not_in_src, rtx *pi3dest_killed)
2049 if (GET_CODE (x) == SET)
2052 rtx dest = SET_DEST (set);
2053 rtx src = SET_SRC (set);
2054 rtx inner_dest = dest;
2057 while (GET_CODE (inner_dest) == STRICT_LOW_PART
2058 || GET_CODE (inner_dest) == SUBREG
2059 || GET_CODE (inner_dest) == ZERO_EXTRACT)
2060 inner_dest = XEXP (inner_dest, 0);
2062 /* Check for the case where I3 modifies its output, as discussed
2063 above. We don't want to prevent pseudos from being combined
2064 into the address of a MEM, so only prevent the combination if
2065 i1 or i2 set the same MEM. */
2066 if ((inner_dest != dest &&
2067 (!MEM_P (inner_dest)
2068 || rtx_equal_p (i2dest, inner_dest)
2069 || (i1dest && rtx_equal_p (i1dest, inner_dest))
2070 || (i0dest && rtx_equal_p (i0dest, inner_dest)))
2071 && (reg_overlap_mentioned_p (i2dest, inner_dest)
2072 || (i1dest && reg_overlap_mentioned_p (i1dest, inner_dest))
2073 || (i0dest && reg_overlap_mentioned_p (i0dest, inner_dest))))
2075 /* This is the same test done in can_combine_p except we can't test
2076 all_adjacent; we don't have to, since this instruction will stay
2077 in place, thus we are not considering increasing the lifetime of
2080 Also, if this insn sets a function argument, combining it with
2081 something that might need a spill could clobber a previous
2082 function argument; the all_adjacent test in can_combine_p also
2083 checks this; here, we do a more specific test for this case. */
2085 || (REG_P (inner_dest)
2086 && REGNO (inner_dest) < FIRST_PSEUDO_REGISTER
2087 && (! HARD_REGNO_MODE_OK (REGNO (inner_dest),
2088 GET_MODE (inner_dest))))
2089 || (i1_not_in_src && reg_overlap_mentioned_p (i1dest, src))
2090 || (i0_not_in_src && reg_overlap_mentioned_p (i0dest, src)))
2093 /* If DEST is used in I3, it is being killed in this insn, so
2094 record that for later. We have to consider paradoxical
2095 subregs here, since they kill the whole register, but we
2096 ignore partial subregs, STRICT_LOW_PART, etc.
2097 Never add REG_DEAD notes for the FRAME_POINTER_REGNUM or the
2098 STACK_POINTER_REGNUM, since these are always considered to be
2099 live. Similarly for ARG_POINTER_REGNUM if it is fixed. */
2101 if (GET_CODE (subdest) == SUBREG
2102 && (GET_MODE_SIZE (GET_MODE (subdest))
2103 >= GET_MODE_SIZE (GET_MODE (SUBREG_REG (subdest)))))
2104 subdest = SUBREG_REG (subdest);
2107 && reg_referenced_p (subdest, PATTERN (i3))
2108 && REGNO (subdest) != FRAME_POINTER_REGNUM
2109 #if !HARD_FRAME_POINTER_IS_FRAME_POINTER
2110 && REGNO (subdest) != HARD_FRAME_POINTER_REGNUM
2112 #if ARG_POINTER_REGNUM != FRAME_POINTER_REGNUM
2113 && (REGNO (subdest) != ARG_POINTER_REGNUM
2114 || ! fixed_regs [REGNO (subdest)])
2116 && REGNO (subdest) != STACK_POINTER_REGNUM)
2118 if (*pi3dest_killed)
2121 *pi3dest_killed = subdest;
2125 else if (GET_CODE (x) == PARALLEL)
2129 for (i = 0; i < XVECLEN (x, 0); i++)
2130 if (! combinable_i3pat (i3, &XVECEXP (x, 0, i), i2dest, i1dest, i0dest,
2131 i1_not_in_src, i0_not_in_src, pi3dest_killed))
2138 /* Return 1 if X is an arithmetic expression that contains a multiplication
2139 and division. We don't count multiplications by powers of two here. */
2142 contains_muldiv (rtx x)
2144 switch (GET_CODE (x))
2146 case MOD: case DIV: case UMOD: case UDIV:
2150 return ! (CONST_INT_P (XEXP (x, 1))
2151 && exact_log2 (UINTVAL (XEXP (x, 1))) >= 0);
2154 return contains_muldiv (XEXP (x, 0))
2155 || contains_muldiv (XEXP (x, 1));
2158 return contains_muldiv (XEXP (x, 0));
2164 /* Determine whether INSN can be used in a combination. Return nonzero if
2165 not. This is used in try_combine to detect early some cases where we
2166 can't perform combinations. */
2169 cant_combine_insn_p (rtx insn)
2174 /* If this isn't really an insn, we can't do anything.
2175 This can occur when flow deletes an insn that it has merged into an
2176 auto-increment address. */
2177 if (! INSN_P (insn))
2180 /* Never combine loads and stores involving hard regs that are likely
2181 to be spilled. The register allocator can usually handle such
2182 reg-reg moves by tying. If we allow the combiner to make
2183 substitutions of likely-spilled regs, reload might die.
2184 As an exception, we allow combinations involving fixed regs; these are
2185 not available to the register allocator so there's no risk involved. */
2187 set = single_set (insn);
2190 src = SET_SRC (set);
2191 dest = SET_DEST (set);
2192 if (GET_CODE (src) == SUBREG)
2193 src = SUBREG_REG (src);
2194 if (GET_CODE (dest) == SUBREG)
2195 dest = SUBREG_REG (dest);
2196 if (REG_P (src) && REG_P (dest)
2197 && ((HARD_REGISTER_P (src)
2198 && ! TEST_HARD_REG_BIT (fixed_reg_set, REGNO (src))
2199 && targetm.class_likely_spilled_p (REGNO_REG_CLASS (REGNO (src))))
2200 || (HARD_REGISTER_P (dest)
2201 && ! TEST_HARD_REG_BIT (fixed_reg_set, REGNO (dest))
2202 && targetm.class_likely_spilled_p (REGNO_REG_CLASS (REGNO (dest))))))
2208 struct likely_spilled_retval_info
2210 unsigned regno, nregs;
2214 /* Called via note_stores by likely_spilled_retval_p. Remove from info->mask
2215 hard registers that are known to be written to / clobbered in full. */
2217 likely_spilled_retval_1 (rtx x, const_rtx set, void *data)
2219 struct likely_spilled_retval_info *const info =
2220 (struct likely_spilled_retval_info *) data;
2221 unsigned regno, nregs;
2224 if (!REG_P (XEXP (set, 0)))
2227 if (regno >= info->regno + info->nregs)
2229 nregs = hard_regno_nregs[regno][GET_MODE (x)];
2230 if (regno + nregs <= info->regno)
2232 new_mask = (2U << (nregs - 1)) - 1;
2233 if (regno < info->regno)
2234 new_mask >>= info->regno - regno;
2236 new_mask <<= regno - info->regno;
2237 info->mask &= ~new_mask;
2240 /* Return nonzero iff part of the return value is live during INSN, and
2241 it is likely spilled. This can happen when more than one insn is needed
2242 to copy the return value, e.g. when we consider to combine into the
2243 second copy insn for a complex value. */
2246 likely_spilled_retval_p (rtx insn)
2248 rtx use = BB_END (this_basic_block);
2250 unsigned regno, nregs;
2251 /* We assume here that no machine mode needs more than
2252 32 hard registers when the value overlaps with a register
2253 for which TARGET_FUNCTION_VALUE_REGNO_P is true. */
2255 struct likely_spilled_retval_info info;
2257 if (!NONJUMP_INSN_P (use) || GET_CODE (PATTERN (use)) != USE || insn == use)
2259 reg = XEXP (PATTERN (use), 0);
2260 if (!REG_P (reg) || !targetm.calls.function_value_regno_p (REGNO (reg)))
2262 regno = REGNO (reg);
2263 nregs = hard_regno_nregs[regno][GET_MODE (reg)];
2266 mask = (2U << (nregs - 1)) - 1;
2268 /* Disregard parts of the return value that are set later. */
2272 for (p = PREV_INSN (use); info.mask && p != insn; p = PREV_INSN (p))
2274 note_stores (PATTERN (p), likely_spilled_retval_1, &info);
2277 /* Check if any of the (probably) live return value registers is
2282 if ((mask & 1 << nregs)
2283 && targetm.class_likely_spilled_p (REGNO_REG_CLASS (regno + nregs)))
2289 /* Adjust INSN after we made a change to its destination.
2291 Changing the destination can invalidate notes that say something about
2292 the results of the insn and a LOG_LINK pointing to the insn. */
2295 adjust_for_new_dest (rtx insn)
2297 /* For notes, be conservative and simply remove them. */
2298 remove_reg_equal_equiv_notes (insn);
2300 /* The new insn will have a destination that was previously the destination
2301 of an insn just above it. Call distribute_links to make a LOG_LINK from
2302 the next use of that destination. */
2303 distribute_links (alloc_insn_link (insn, NULL));
2305 df_insn_rescan (insn);
2308 /* Return TRUE if combine can reuse reg X in mode MODE.
2309 ADDED_SETS is nonzero if the original set is still required. */
2311 can_change_dest_mode (rtx x, int added_sets, enum machine_mode mode)
2319 /* Allow hard registers if the new mode is legal, and occupies no more
2320 registers than the old mode. */
2321 if (regno < FIRST_PSEUDO_REGISTER)
2322 return (HARD_REGNO_MODE_OK (regno, mode)
2323 && (hard_regno_nregs[regno][GET_MODE (x)]
2324 >= hard_regno_nregs[regno][mode]));
2326 /* Or a pseudo that is only used once. */
2327 return (REG_N_SETS (regno) == 1 && !added_sets
2328 && !REG_USERVAR_P (x));
2332 /* Check whether X, the destination of a set, refers to part of
2333 the register specified by REG. */
2336 reg_subword_p (rtx x, rtx reg)
2338 /* Check that reg is an integer mode register. */
2339 if (!REG_P (reg) || GET_MODE_CLASS (GET_MODE (reg)) != MODE_INT)
2342 if (GET_CODE (x) == STRICT_LOW_PART
2343 || GET_CODE (x) == ZERO_EXTRACT)
2346 return GET_CODE (x) == SUBREG
2347 && SUBREG_REG (x) == reg
2348 && GET_MODE_CLASS (GET_MODE (x)) == MODE_INT;
2352 /* Replace auto-increment addressing modes with explicit operations to access
2353 the same addresses without modifying the corresponding registers. */
2356 cleanup_auto_inc_dec (rtx src, enum machine_mode mem_mode)
2359 const RTX_CODE code = GET_CODE (x);
2375 /* SCRATCH must be shared because they represent distinct values. */
2378 if (REG_P (XEXP (x, 0)) && REGNO (XEXP (x, 0)) < FIRST_PSEUDO_REGISTER)
2383 if (shared_const_p (x))
2388 mem_mode = GET_MODE (x);
2393 gcc_assert (mem_mode != VOIDmode && mem_mode != BLKmode);
2394 return gen_rtx_PLUS (GET_MODE (x),
2395 cleanup_auto_inc_dec (XEXP (x, 0), mem_mode),
2396 GEN_INT (code == PRE_INC
2397 ? GET_MODE_SIZE (mem_mode)
2398 : -GET_MODE_SIZE (mem_mode)));
2404 return cleanup_auto_inc_dec (code == PRE_MODIFY
2405 ? XEXP (x, 1) : XEXP (x, 0),
2412 /* Copy the various flags, fields, and other information. We assume
2413 that all fields need copying, and then clear the fields that should
2414 not be copied. That is the sensible default behavior, and forces
2415 us to explicitly document why we are *not* copying a flag. */
2416 x = shallow_copy_rtx (x);
2418 /* We do not copy the USED flag, which is used as a mark bit during
2419 walks over the RTL. */
2420 RTX_FLAG (x, used) = 0;
2422 /* We do not copy FRAME_RELATED for INSNs. */
2424 RTX_FLAG (x, frame_related) = 0;
2426 fmt = GET_RTX_FORMAT (code);
2427 for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
2429 XEXP (x, i) = cleanup_auto_inc_dec (XEXP (x, i), mem_mode);
2430 else if (fmt[i] == 'E' || fmt[i] == 'V')
2433 XVEC (x, i) = rtvec_alloc (XVECLEN (x, i));
2434 for (j = 0; j < XVECLEN (x, i); j++)
2436 = cleanup_auto_inc_dec (XVECEXP (src, i, j), mem_mode);
2443 /* Auxiliary data structure for propagate_for_debug_stmt. */
2445 struct rtx_subst_pair
2451 /* DATA points to an rtx_subst_pair. Return the value that should be
2455 propagate_for_debug_subst (rtx from, const_rtx old_rtx, void *data)
2457 struct rtx_subst_pair *pair = (struct rtx_subst_pair *)data;
2459 if (!rtx_equal_p (from, old_rtx))
2461 if (!pair->adjusted)
2463 pair->adjusted = true;
2465 pair->to = cleanup_auto_inc_dec (pair->to, VOIDmode);
2467 pair->to = copy_rtx (pair->to);
2469 pair->to = make_compound_operation (pair->to, SET);
2472 return copy_rtx (pair->to);
2475 /* Replace all the occurrences of DEST with SRC in DEBUG_INSNs between INSN
2476 and LAST, not including INSN, but including LAST. Also stop at the end
2477 of THIS_BASIC_BLOCK. */
2480 propagate_for_debug (rtx insn, rtx last, rtx dest, rtx src)
2482 rtx next, loc, end = NEXT_INSN (BB_END (this_basic_block));
2484 struct rtx_subst_pair p;
2488 next = NEXT_INSN (insn);
2489 last = NEXT_INSN (last);
2490 while (next != last && next != end)
2493 next = NEXT_INSN (insn);
2494 if (DEBUG_INSN_P (insn))
2496 loc = simplify_replace_fn_rtx (INSN_VAR_LOCATION_LOC (insn),
2497 dest, propagate_for_debug_subst, &p);
2498 if (loc == INSN_VAR_LOCATION_LOC (insn))
2500 INSN_VAR_LOCATION_LOC (insn) = loc;
2501 df_insn_rescan (insn);
2506 /* Delete the unconditional jump INSN and adjust the CFG correspondingly.
2507 Note that the INSN should be deleted *after* removing dead edges, so
2508 that the kept edge is the fallthrough edge for a (set (pc) (pc))
2509 but not for a (set (pc) (label_ref FOO)). */
2512 update_cfg_for_uncondjump (rtx insn)
2514 basic_block bb = BLOCK_FOR_INSN (insn);
2515 gcc_assert (BB_END (bb) == insn);
2517 purge_dead_edges (bb);
2520 if (EDGE_COUNT (bb->succs) == 1)
2524 single_succ_edge (bb)->flags |= EDGE_FALLTHRU;
2526 /* Remove barriers from the footer if there are any. */
2527 for (insn = bb->il.rtl->footer; insn; insn = NEXT_INSN (insn))
2528 if (BARRIER_P (insn))
2530 if (PREV_INSN (insn))
2531 NEXT_INSN (PREV_INSN (insn)) = NEXT_INSN (insn);
2533 bb->il.rtl->footer = NEXT_INSN (insn);
2534 if (NEXT_INSN (insn))
2535 PREV_INSN (NEXT_INSN (insn)) = PREV_INSN (insn);
2537 else if (LABEL_P (insn))
2542 /* Try to combine the insns I0, I1 and I2 into I3.
2543 Here I0, I1 and I2 appear earlier than I3.
2544 I0 and I1 can be zero; then we combine just I2 into I3, or I1 and I2 into
2547 If we are combining more than two insns and the resulting insn is not
2548 recognized, try splitting it into two insns. If that happens, I2 and I3
2549 are retained and I1/I0 are pseudo-deleted by turning them into a NOTE.
2550 Otherwise, I0, I1 and I2 are pseudo-deleted.
2552 Return 0 if the combination does not work. Then nothing is changed.
2553 If we did the combination, return the insn at which combine should
2556 Set NEW_DIRECT_JUMP_P to a nonzero value if try_combine creates a
2557 new direct jump instruction.
2559 LAST_COMBINED_INSN is either I3, or some insn after I3 that has
2560 been I3 passed to an earlier try_combine within the same basic
2564 try_combine (rtx i3, rtx i2, rtx i1, rtx i0, int *new_direct_jump_p,
2565 rtx last_combined_insn)
2567 /* New patterns for I3 and I2, respectively. */
2568 rtx newpat, newi2pat = 0;
2569 rtvec newpat_vec_with_clobbers = 0;
2570 int substed_i2 = 0, substed_i1 = 0, substed_i0 = 0;
2571 /* Indicates need to preserve SET in I0, I1 or I2 in I3 if it is not
2573 int added_sets_0, added_sets_1, added_sets_2;
2574 /* Total number of SETs to put into I3. */
2576 /* Nonzero if I2's or I1's body now appears in I3. */
2577 int i2_is_used = 0, i1_is_used = 0;
2578 /* INSN_CODEs for new I3, new I2, and user of condition code. */
2579 int insn_code_number, i2_code_number = 0, other_code_number = 0;
2580 /* Contains I3 if the destination of I3 is used in its source, which means
2581 that the old life of I3 is being killed. If that usage is placed into
2582 I2 and not in I3, a REG_DEAD note must be made. */
2583 rtx i3dest_killed = 0;
2584 /* SET_DEST and SET_SRC of I2, I1 and I0. */
2585 rtx i2dest = 0, i2src = 0, i1dest = 0, i1src = 0, i0dest = 0, i0src = 0;
2586 /* Copy of SET_SRC of I1, if needed. */
2588 /* Set if I2DEST was reused as a scratch register. */
2589 bool i2scratch = false;
2590 /* The PATTERNs of I0, I1, and I2, or a copy of them in certain cases. */
2591 rtx i0pat = 0, i1pat = 0, i2pat = 0;
2592 /* Indicates if I2DEST or I1DEST is in I2SRC or I1_SRC. */
2593 int i2dest_in_i2src = 0, i1dest_in_i1src = 0, i2dest_in_i1src = 0;
2594 int i0dest_in_i0src = 0, i1dest_in_i0src = 0, i2dest_in_i0src = 0;
2595 int i2dest_killed = 0, i1dest_killed = 0, i0dest_killed = 0;
2596 int i1_feeds_i2_n = 0, i0_feeds_i2_n = 0, i0_feeds_i1_n = 0;
2597 /* Notes that must be added to REG_NOTES in I3 and I2. */
2598 rtx new_i3_notes, new_i2_notes;
2599 /* Notes that we substituted I3 into I2 instead of the normal case. */
2600 int i3_subst_into_i2 = 0;
2601 /* Notes that I1, I2 or I3 is a MULT operation. */
2604 int changed_i3_dest = 0;
2608 struct insn_link *link;
2610 rtx new_other_notes;
2613 /* Only try four-insn combinations when there's high likelihood of
2614 success. Look for simple insns, such as loads of constants or
2615 binary operations involving a constant. */
2622 if (!flag_expensive_optimizations)
2625 for (i = 0; i < 4; i++)
2627 rtx insn = i == 0 ? i0 : i == 1 ? i1 : i == 2 ? i2 : i3;
2628 rtx set = single_set (insn);
2632 src = SET_SRC (set);
2633 if (CONSTANT_P (src))
2638 else if (BINARY_P (src) && CONSTANT_P (XEXP (src, 1)))
2640 else if (GET_CODE (src) == ASHIFT || GET_CODE (src) == ASHIFTRT
2641 || GET_CODE (src) == LSHIFTRT)
2644 if (ngood < 2 && nshift < 2)
2648 /* Exit early if one of the insns involved can't be used for
2650 if (cant_combine_insn_p (i3)
2651 || cant_combine_insn_p (i2)
2652 || (i1 && cant_combine_insn_p (i1))
2653 || (i0 && cant_combine_insn_p (i0))
2654 || likely_spilled_retval_p (i3))
2658 undobuf.other_insn = 0;
2660 /* Reset the hard register usage information. */
2661 CLEAR_HARD_REG_SET (newpat_used_regs);
2663 if (dump_file && (dump_flags & TDF_DETAILS))
2666 fprintf (dump_file, "\nTrying %d, %d, %d -> %d:\n",
2667 INSN_UID (i0), INSN_UID (i1), INSN_UID (i2), INSN_UID (i3));
2669 fprintf (dump_file, "\nTrying %d, %d -> %d:\n",
2670 INSN_UID (i1), INSN_UID (i2), INSN_UID (i3));
2672 fprintf (dump_file, "\nTrying %d -> %d:\n",
2673 INSN_UID (i2), INSN_UID (i3));
2676 /* If multiple insns feed into one of I2 or I3, they can be in any
2677 order. To simplify the code below, reorder them in sequence. */
2678 if (i0 && DF_INSN_LUID (i0) > DF_INSN_LUID (i2))
2679 temp = i2, i2 = i0, i0 = temp;
2680 if (i0 && DF_INSN_LUID (i0) > DF_INSN_LUID (i1))
2681 temp = i1, i1 = i0, i0 = temp;
2682 if (i1 && DF_INSN_LUID (i1) > DF_INSN_LUID (i2))
2683 temp = i1, i1 = i2, i2 = temp;
2685 added_links_insn = 0;
2687 /* First check for one important special case that the code below will
2688 not handle. Namely, the case where I1 is zero, I2 is a PARALLEL
2689 and I3 is a SET whose SET_SRC is a SET_DEST in I2. In that case,
2690 we may be able to replace that destination with the destination of I3.
2691 This occurs in the common code where we compute both a quotient and
2692 remainder into a structure, in which case we want to do the computation
2693 directly into the structure to avoid register-register copies.
2695 Note that this case handles both multiple sets in I2 and also cases
2696 where I2 has a number of CLOBBERs inside the PARALLEL.
2698 We make very conservative checks below and only try to handle the
2699 most common cases of this. For example, we only handle the case
2700 where I2 and I3 are adjacent to avoid making difficult register
2703 if (i1 == 0 && NONJUMP_INSN_P (i3) && GET_CODE (PATTERN (i3)) == SET
2704 && REG_P (SET_SRC (PATTERN (i3)))
2705 && REGNO (SET_SRC (PATTERN (i3))) >= FIRST_PSEUDO_REGISTER
2706 && find_reg_note (i3, REG_DEAD, SET_SRC (PATTERN (i3)))
2707 && GET_CODE (PATTERN (i2)) == PARALLEL
2708 && ! side_effects_p (SET_DEST (PATTERN (i3)))
2709 /* If the dest of I3 is a ZERO_EXTRACT or STRICT_LOW_PART, the code
2710 below would need to check what is inside (and reg_overlap_mentioned_p
2711 doesn't support those codes anyway). Don't allow those destinations;
2712 the resulting insn isn't likely to be recognized anyway. */
2713 && GET_CODE (SET_DEST (PATTERN (i3))) != ZERO_EXTRACT
2714 && GET_CODE (SET_DEST (PATTERN (i3))) != STRICT_LOW_PART
2715 && ! reg_overlap_mentioned_p (SET_SRC (PATTERN (i3)),
2716 SET_DEST (PATTERN (i3)))
2717 && next_active_insn (i2) == i3)
2719 rtx p2 = PATTERN (i2);
2721 /* Make sure that the destination of I3,
2722 which we are going to substitute into one output of I2,
2723 is not used within another output of I2. We must avoid making this:
2724 (parallel [(set (mem (reg 69)) ...)
2725 (set (reg 69) ...)])
2726 which is not well-defined as to order of actions.
2727 (Besides, reload can't handle output reloads for this.)
2729 The problem can also happen if the dest of I3 is a memory ref,
2730 if another dest in I2 is an indirect memory ref. */
2731 for (i = 0; i < XVECLEN (p2, 0); i++)
2732 if ((GET_CODE (XVECEXP (p2, 0, i)) == SET
2733 || GET_CODE (XVECEXP (p2, 0, i)) == CLOBBER)
2734 && reg_overlap_mentioned_p (SET_DEST (PATTERN (i3)),
2735 SET_DEST (XVECEXP (p2, 0, i))))
2738 if (i == XVECLEN (p2, 0))
2739 for (i = 0; i < XVECLEN (p2, 0); i++)
2740 if (GET_CODE (XVECEXP (p2, 0, i)) == SET
2741 && SET_DEST (XVECEXP (p2, 0, i)) == SET_SRC (PATTERN (i3)))
2746 subst_low_luid = DF_INSN_LUID (i2);
2748 added_sets_2 = added_sets_1 = added_sets_0 = 0;
2749 i2src = SET_SRC (XVECEXP (p2, 0, i));
2750 i2dest = SET_DEST (XVECEXP (p2, 0, i));
2751 i2dest_killed = dead_or_set_p (i2, i2dest);
2753 /* Replace the dest in I2 with our dest and make the resulting
2754 insn the new pattern for I3. Then skip to where we validate
2755 the pattern. Everything was set up above. */
2756 SUBST (SET_DEST (XVECEXP (p2, 0, i)), SET_DEST (PATTERN (i3)));
2758 i3_subst_into_i2 = 1;
2759 goto validate_replacement;
2763 /* If I2 is setting a pseudo to a constant and I3 is setting some
2764 sub-part of it to another constant, merge them by making a new
2767 && (temp = single_set (i2)) != 0
2768 && (CONST_INT_P (SET_SRC (temp))
2769 || GET_CODE (SET_SRC (temp)) == CONST_DOUBLE)
2770 && GET_CODE (PATTERN (i3)) == SET
2771 && (CONST_INT_P (SET_SRC (PATTERN (i3)))
2772 || GET_CODE (SET_SRC (PATTERN (i3))) == CONST_DOUBLE)
2773 && reg_subword_p (SET_DEST (PATTERN (i3)), SET_DEST (temp)))
2775 rtx dest = SET_DEST (PATTERN (i3));
2779 if (GET_CODE (dest) == ZERO_EXTRACT)
2781 if (CONST_INT_P (XEXP (dest, 1))
2782 && CONST_INT_P (XEXP (dest, 2)))
2784 width = INTVAL (XEXP (dest, 1));
2785 offset = INTVAL (XEXP (dest, 2));
2786 dest = XEXP (dest, 0);
2787 if (BITS_BIG_ENDIAN)
2788 offset = GET_MODE_PRECISION (GET_MODE (dest)) - width - offset;
2793 if (GET_CODE (dest) == STRICT_LOW_PART)
2794 dest = XEXP (dest, 0);
2795 width = GET_MODE_PRECISION (GET_MODE (dest));
2801 /* If this is the low part, we're done. */
2802 if (subreg_lowpart_p (dest))
2804 /* Handle the case where inner is twice the size of outer. */
2805 else if (GET_MODE_PRECISION (GET_MODE (SET_DEST (temp)))
2806 == 2 * GET_MODE_PRECISION (GET_MODE (dest)))
2807 offset += GET_MODE_PRECISION (GET_MODE (dest));
2808 /* Otherwise give up for now. */
2814 && (GET_MODE_PRECISION (GET_MODE (SET_DEST (temp)))
2815 <= HOST_BITS_PER_DOUBLE_INT))
2818 rtx inner = SET_SRC (PATTERN (i3));
2819 rtx outer = SET_SRC (temp);
2821 o = rtx_to_double_int (outer);
2822 i = rtx_to_double_int (inner);
2824 m = double_int_mask (width);
2825 i = double_int_and (i, m);
2826 m = double_int_lshift (m, offset, HOST_BITS_PER_DOUBLE_INT, false);
2827 i = double_int_lshift (i, offset, HOST_BITS_PER_DOUBLE_INT, false);
2828 o = double_int_ior (double_int_and_not (o, m), i);
2832 subst_low_luid = DF_INSN_LUID (i2);
2833 added_sets_2 = added_sets_1 = added_sets_0 = 0;
2834 i2dest = SET_DEST (temp);
2835 i2dest_killed = dead_or_set_p (i2, i2dest);
2837 /* Replace the source in I2 with the new constant and make the
2838 resulting insn the new pattern for I3. Then skip to where we
2839 validate the pattern. Everything was set up above. */
2840 SUBST (SET_SRC (temp),
2841 immed_double_int_const (o, GET_MODE (SET_DEST (temp))));
2843 newpat = PATTERN (i2);
2845 /* The dest of I3 has been replaced with the dest of I2. */
2846 changed_i3_dest = 1;
2847 goto validate_replacement;
2852 /* If we have no I1 and I2 looks like:
2853 (parallel [(set (reg:CC X) (compare:CC OP (const_int 0)))
2855 make up a dummy I1 that is
2858 (set (reg:CC X) (compare:CC Y (const_int 0)))
2860 (We can ignore any trailing CLOBBERs.)
2862 This undoes a previous combination and allows us to match a branch-and-
2865 if (i1 == 0 && GET_CODE (PATTERN (i2)) == PARALLEL
2866 && XVECLEN (PATTERN (i2), 0) >= 2
2867 && GET_CODE (XVECEXP (PATTERN (i2), 0, 0)) == SET
2868 && (GET_MODE_CLASS (GET_MODE (SET_DEST (XVECEXP (PATTERN (i2), 0, 0))))
2870 && GET_CODE (SET_SRC (XVECEXP (PATTERN (i2), 0, 0))) == COMPARE
2871 && XEXP (SET_SRC (XVECEXP (PATTERN (i2), 0, 0)), 1) == const0_rtx
2872 && GET_CODE (XVECEXP (PATTERN (i2), 0, 1)) == SET
2873 && REG_P (SET_DEST (XVECEXP (PATTERN (i2), 0, 1)))
2874 && rtx_equal_p (XEXP (SET_SRC (XVECEXP (PATTERN (i2), 0, 0)), 0),
2875 SET_SRC (XVECEXP (PATTERN (i2), 0, 1))))
2877 for (i = XVECLEN (PATTERN (i2), 0) - 1; i >= 2; i--)
2878 if (GET_CODE (XVECEXP (PATTERN (i2), 0, i)) != CLOBBER)
2883 /* We make I1 with the same INSN_UID as I2. This gives it
2884 the same DF_INSN_LUID for value tracking. Our fake I1 will
2885 never appear in the insn stream so giving it the same INSN_UID
2886 as I2 will not cause a problem. */
2888 i1 = gen_rtx_INSN (VOIDmode, INSN_UID (i2), NULL_RTX, i2,
2889 BLOCK_FOR_INSN (i2), XVECEXP (PATTERN (i2), 0, 1),
2890 INSN_LOCATOR (i2), -1, NULL_RTX);
2892 SUBST (PATTERN (i2), XVECEXP (PATTERN (i2), 0, 0));
2893 SUBST (XEXP (SET_SRC (PATTERN (i2)), 0),
2894 SET_DEST (PATTERN (i1)));
2895 SUBST_LINK (LOG_LINKS (i2), alloc_insn_link (i1, LOG_LINKS (i2)));
2900 /* Verify that I2 and I1 are valid for combining. */
2901 if (! can_combine_p (i2, i3, i0, i1, NULL_RTX, NULL_RTX, &i2dest, &i2src)
2902 || (i1 && ! can_combine_p (i1, i3, i0, NULL_RTX, i2, NULL_RTX,
2904 || (i0 && ! can_combine_p (i0, i3, NULL_RTX, NULL_RTX, i1, i2,
2911 /* Record whether I2DEST is used in I2SRC and similarly for the other
2912 cases. Knowing this will help in register status updating below. */
2913 i2dest_in_i2src = reg_overlap_mentioned_p (i2dest, i2src);
2914 i1dest_in_i1src = i1 && reg_overlap_mentioned_p (i1dest, i1src);
2915 i2dest_in_i1src = i1 && reg_overlap_mentioned_p (i2dest, i1src);
2916 i0dest_in_i0src = i0 && reg_overlap_mentioned_p (i0dest, i0src);
2917 i1dest_in_i0src = i0 && reg_overlap_mentioned_p (i1dest, i0src);
2918 i2dest_in_i0src = i0 && reg_overlap_mentioned_p (i2dest, i0src);
2919 i2dest_killed = dead_or_set_p (i2, i2dest);
2920 i1dest_killed = i1 && dead_or_set_p (i1, i1dest);
2921 i0dest_killed = i0 && dead_or_set_p (i0, i0dest);
2923 /* For the earlier insns, determine which of the subsequent ones they
2925 i1_feeds_i2_n = i1 && insn_a_feeds_b (i1, i2);
2926 i0_feeds_i1_n = i0 && insn_a_feeds_b (i0, i1);
2927 i0_feeds_i2_n = (i0 && (!i0_feeds_i1_n ? insn_a_feeds_b (i0, i2)
2928 : (!reg_overlap_mentioned_p (i1dest, i0dest)
2929 && reg_overlap_mentioned_p (i0dest, i2src))));
2931 /* Ensure that I3's pattern can be the destination of combines. */
2932 if (! combinable_i3pat (i3, &PATTERN (i3), i2dest, i1dest, i0dest,
2933 i1 && i2dest_in_i1src && !i1_feeds_i2_n,
2934 i0 && ((i2dest_in_i0src && !i0_feeds_i2_n)
2935 || (i1dest_in_i0src && !i0_feeds_i1_n)),
2942 /* See if any of the insns is a MULT operation. Unless one is, we will
2943 reject a combination that is, since it must be slower. Be conservative
2945 if (GET_CODE (i2src) == MULT
2946 || (i1 != 0 && GET_CODE (i1src) == MULT)
2947 || (i0 != 0 && GET_CODE (i0src) == MULT)
2948 || (GET_CODE (PATTERN (i3)) == SET
2949 && GET_CODE (SET_SRC (PATTERN (i3))) == MULT))
2952 /* If I3 has an inc, then give up if I1 or I2 uses the reg that is inc'd.
2953 We used to do this EXCEPT in one case: I3 has a post-inc in an
2954 output operand. However, that exception can give rise to insns like
2956 which is a famous insn on the PDP-11 where the value of r3 used as the
2957 source was model-dependent. Avoid this sort of thing. */
2960 if (!(GET_CODE (PATTERN (i3)) == SET
2961 && REG_P (SET_SRC (PATTERN (i3)))
2962 && MEM_P (SET_DEST (PATTERN (i3)))
2963 && (GET_CODE (XEXP (SET_DEST (PATTERN (i3)), 0)) == POST_INC
2964 || GET_CODE (XEXP (SET_DEST (PATTERN (i3)), 0)) == POST_DEC)))
2965 /* It's not the exception. */
2970 for (link = REG_NOTES (i3); link; link = XEXP (link, 1))
2971 if (REG_NOTE_KIND (link) == REG_INC
2972 && (reg_overlap_mentioned_p (XEXP (link, 0), PATTERN (i2))
2974 && reg_overlap_mentioned_p (XEXP (link, 0), PATTERN (i1)))))
2982 /* See if the SETs in I1 or I2 need to be kept around in the merged
2983 instruction: whenever the value set there is still needed past I3.
2984 For the SETs in I2, this is easy: we see if I2DEST dies or is set in I3.
2986 For the SET in I1, we have two cases: If I1 and I2 independently
2987 feed into I3, the set in I1 needs to be kept around if I1DEST dies
2988 or is set in I3. Otherwise (if I1 feeds I2 which feeds I3), the set
2989 in I1 needs to be kept around unless I1DEST dies or is set in either
2990 I2 or I3. The same consideration applies to I0. */
2992 added_sets_2 = !dead_or_set_p (i3, i2dest);
2995 added_sets_1 = !(dead_or_set_p (i3, i1dest)
2996 || (i1_feeds_i2_n && dead_or_set_p (i2, i1dest)));
3001 added_sets_0 = !(dead_or_set_p (i3, i0dest)
3002 || (i0_feeds_i2_n && dead_or_set_p (i2, i0dest))
3003 || (i0_feeds_i1_n && dead_or_set_p (i1, i0dest)));
3007 /* We are about to copy insns for the case where they need to be kept
3008 around. Check that they can be copied in the merged instruction. */
3010 if (targetm.cannot_copy_insn_p
3011 && ((added_sets_2 && targetm.cannot_copy_insn_p (i2))
3012 || (i1 && added_sets_1 && targetm.cannot_copy_insn_p (i1))
3013 || (i0 && added_sets_0 && targetm.cannot_copy_insn_p (i0))))
3019 /* If the set in I2 needs to be kept around, we must make a copy of
3020 PATTERN (I2), so that when we substitute I1SRC for I1DEST in
3021 PATTERN (I2), we are only substituting for the original I1DEST, not into
3022 an already-substituted copy. This also prevents making self-referential
3023 rtx. If I2 is a PARALLEL, we just need the piece that assigns I2SRC to
3028 if (GET_CODE (PATTERN (i2)) == PARALLEL)
3029 i2pat = gen_rtx_SET (VOIDmode, i2dest, copy_rtx (i2src));
3031 i2pat = copy_rtx (PATTERN (i2));
3036 if (GET_CODE (PATTERN (i1)) == PARALLEL)
3037 i1pat = gen_rtx_SET (VOIDmode, i1dest, copy_rtx (i1src));
3039 i1pat = copy_rtx (PATTERN (i1));
3044 if (GET_CODE (PATTERN (i0)) == PARALLEL)
3045 i0pat = gen_rtx_SET (VOIDmode, i0dest, copy_rtx (i0src));
3047 i0pat = copy_rtx (PATTERN (i0));
3052 /* Substitute in the latest insn for the regs set by the earlier ones. */
3054 maxreg = max_reg_num ();
3059 /* Many machines that don't use CC0 have insns that can both perform an
3060 arithmetic operation and set the condition code. These operations will
3061 be represented as a PARALLEL with the first element of the vector
3062 being a COMPARE of an arithmetic operation with the constant zero.
3063 The second element of the vector will set some pseudo to the result
3064 of the same arithmetic operation. If we simplify the COMPARE, we won't
3065 match such a pattern and so will generate an extra insn. Here we test
3066 for this case, where both the comparison and the operation result are
3067 needed, and make the PARALLEL by just replacing I2DEST in I3SRC with
3068 I2SRC. Later we will make the PARALLEL that contains I2. */
3070 if (i1 == 0 && added_sets_2 && GET_CODE (PATTERN (i3)) == SET
3071 && GET_CODE (SET_SRC (PATTERN (i3))) == COMPARE
3072 && CONST_INT_P (XEXP (SET_SRC (PATTERN (i3)), 1))
3073 && rtx_equal_p (XEXP (SET_SRC (PATTERN (i3)), 0), i2dest))
3076 rtx *cc_use_loc = NULL, cc_use_insn = NULL_RTX;
3077 rtx op0 = i2src, op1 = XEXP (SET_SRC (PATTERN (i3)), 1);
3078 enum machine_mode compare_mode, orig_compare_mode;
3079 enum rtx_code compare_code = UNKNOWN, orig_compare_code = UNKNOWN;
3081 newpat = PATTERN (i3);
3082 newpat_dest = SET_DEST (newpat);
3083 compare_mode = orig_compare_mode = GET_MODE (newpat_dest);
3085 if (undobuf.other_insn == 0
3086 && (cc_use_loc = find_single_use (SET_DEST (newpat), i3,
3089 compare_code = orig_compare_code = GET_CODE (*cc_use_loc);
3090 compare_code = simplify_compare_const (compare_code,
3092 #ifdef CANONICALIZE_COMPARISON
3093 CANONICALIZE_COMPARISON (compare_code, op0, op1);
3097 /* Do the rest only if op1 is const0_rtx, which may be the
3098 result of simplification. */
3099 if (op1 == const0_rtx)
3101 /* If a single use of the CC is found, prepare to modify it
3102 when SELECT_CC_MODE returns a new CC-class mode, or when
3103 the above simplify_compare_const() returned a new comparison
3104 operator. undobuf.other_insn is assigned the CC use insn
3105 when modifying it. */
3108 #ifdef SELECT_CC_MODE
3109 enum machine_mode new_mode
3110 = SELECT_CC_MODE (compare_code, op0, op1);
3111 if (new_mode != orig_compare_mode
3112 && can_change_dest_mode (SET_DEST (newpat),
3113 added_sets_2, new_mode))
3115 unsigned int regno = REGNO (newpat_dest);
3116 compare_mode = new_mode;
3117 if (regno < FIRST_PSEUDO_REGISTER)
3118 newpat_dest = gen_rtx_REG (compare_mode, regno);
3121 SUBST_MODE (regno_reg_rtx[regno], compare_mode);
3122 newpat_dest = regno_reg_rtx[regno];
3126 /* Cases for modifying the CC-using comparison. */
3127 if (compare_code != orig_compare_code
3128 /* ??? Do we need to verify the zero rtx? */
3129 && XEXP (*cc_use_loc, 1) == const0_rtx)
3131 /* Replace cc_use_loc with entire new RTX. */
3133 gen_rtx_fmt_ee (compare_code, compare_mode,
3134 newpat_dest, const0_rtx));
3135 undobuf.other_insn = cc_use_insn;
3137 else if (compare_mode != orig_compare_mode)
3139 /* Just replace the CC reg with a new mode. */
3140 SUBST (XEXP (*cc_use_loc, 0), newpat_dest);
3141 undobuf.other_insn = cc_use_insn;
3145 /* Now we modify the current newpat:
3146 First, SET_DEST(newpat) is updated if the CC mode has been
3147 altered. For targets without SELECT_CC_MODE, this should be
3149 if (compare_mode != orig_compare_mode)
3150 SUBST (SET_DEST (newpat), newpat_dest);
3151 /* This is always done to propagate i2src into newpat. */
3152 SUBST (SET_SRC (newpat),
3153 gen_rtx_COMPARE (compare_mode, op0, op1));
3154 /* Create new version of i2pat if needed; the below PARALLEL
3155 creation needs this to work correctly. */
3156 if (! rtx_equal_p (i2src, op0))
3157 i2pat = gen_rtx_SET (VOIDmode, i2dest, op0);
3163 if (i2_is_used == 0)
3165 /* It is possible that the source of I2 or I1 may be performing
3166 an unneeded operation, such as a ZERO_EXTEND of something
3167 that is known to have the high part zero. Handle that case
3168 by letting subst look at the inner insns.
3170 Another way to do this would be to have a function that tries
3171 to simplify a single insn instead of merging two or more
3172 insns. We don't do this because of the potential of infinite
3173 loops and because of the potential extra memory required.
3174 However, doing it the way we are is a bit of a kludge and
3175 doesn't catch all cases.
3177 But only do this if -fexpensive-optimizations since it slows
3178 things down and doesn't usually win.
3180 This is not done in the COMPARE case above because the
3181 unmodified I2PAT is used in the PARALLEL and so a pattern
3182 with a modified I2SRC would not match. */
3184 if (flag_expensive_optimizations)
3186 /* Pass pc_rtx so no substitutions are done, just
3190 subst_low_luid = DF_INSN_LUID (i1);
3191 i1src = subst (i1src, pc_rtx, pc_rtx, 0, 0, 0);
3194 subst_low_luid = DF_INSN_LUID (i2);
3195 i2src = subst (i2src, pc_rtx, pc_rtx, 0, 0, 0);
3198 n_occurrences = 0; /* `subst' counts here */
3199 subst_low_luid = DF_INSN_LUID (i2);
3201 /* If I1 feeds into I2 and I1DEST is in I1SRC, we need to make a unique
3202 copy of I2SRC each time we substitute it, in order to avoid creating
3203 self-referential RTL when we will be substituting I1SRC for I1DEST
3204 later. Likewise if I0 feeds into I2, either directly or indirectly
3205 through I1, and I0DEST is in I0SRC. */
3206 newpat = subst (PATTERN (i3), i2dest, i2src, 0, 0,
3207 (i1_feeds_i2_n && i1dest_in_i1src)
3208 || ((i0_feeds_i2_n || (i0_feeds_i1_n && i1_feeds_i2_n))
3209 && i0dest_in_i0src));
3212 /* Record whether I2's body now appears within I3's body. */
3213 i2_is_used = n_occurrences;
3216 /* If we already got a failure, don't try to do more. Otherwise, try to
3217 substitute I1 if we have it. */
3219 if (i1 && GET_CODE (newpat) != CLOBBER)
3221 /* Check that an autoincrement side-effect on I1 has not been lost.
3222 This happens if I1DEST is mentioned in I2 and dies there, and
3223 has disappeared from the new pattern. */
3224 if ((FIND_REG_INC_NOTE (i1, NULL_RTX) != 0
3226 && dead_or_set_p (i2, i1dest)
3227 && !reg_overlap_mentioned_p (i1dest, newpat))
3228 /* Before we can do this substitution, we must redo the test done
3229 above (see detailed comments there) that ensures I1DEST isn't
3230 mentioned in any SETs in NEWPAT that are field assignments. */
3231 || !combinable_i3pat (NULL_RTX, &newpat, i1dest, NULL_RTX, NULL_RTX,
3239 subst_low_luid = DF_INSN_LUID (i1);
3241 /* If I0 feeds into I1 and I0DEST is in I0SRC, we need to make a unique
3242 copy of I1SRC each time we substitute it, in order to avoid creating
3243 self-referential RTL when we will be substituting I0SRC for I0DEST
3245 newpat = subst (newpat, i1dest, i1src, 0, 0,
3246 i0_feeds_i1_n && i0dest_in_i0src);
3249 /* Record whether I1's body now appears within I3's body. */
3250 i1_is_used = n_occurrences;
3253 /* Likewise for I0 if we have it. */
3255 if (i0 && GET_CODE (newpat) != CLOBBER)
3257 if ((FIND_REG_INC_NOTE (i0, NULL_RTX) != 0
3258 && ((i0_feeds_i2_n && dead_or_set_p (i2, i0dest))
3259 || (i0_feeds_i1_n && dead_or_set_p (i1, i0dest)))
3260 && !reg_overlap_mentioned_p (i0dest, newpat))
3261 || !combinable_i3pat (NULL_RTX, &newpat, i0dest, NULL_RTX, NULL_RTX,
3268 /* If the following substitution will modify I1SRC, make a copy of it
3269 for the case where it is substituted for I1DEST in I2PAT later. */
3270 if (i0_feeds_i1_n && added_sets_2 && i1_feeds_i2_n)
3271 i1src_copy = copy_rtx (i1src);
3274 subst_low_luid = DF_INSN_LUID (i0);
3275 newpat = subst (newpat, i0dest, i0src, 0, 0, 0);
3279 /* Fail if an autoincrement side-effect has been duplicated. Be careful
3280 to count all the ways that I2SRC and I1SRC can be used. */
3281 if ((FIND_REG_INC_NOTE (i2, NULL_RTX) != 0
3282 && i2_is_used + added_sets_2 > 1)
3283 || (i1 != 0 && FIND_REG_INC_NOTE (i1, NULL_RTX) != 0
3284 && (i1_is_used + added_sets_1 + (added_sets_2 && i1_feeds_i2_n)
3286 || (i0 != 0 && FIND_REG_INC_NOTE (i0, NULL_RTX) != 0
3287 && (n_occurrences + added_sets_0
3288 + (added_sets_1 && i0_feeds_i1_n)
3289 + (added_sets_2 && i0_feeds_i2_n)
3291 /* Fail if we tried to make a new register. */
3292 || max_reg_num () != maxreg
3293 /* Fail if we couldn't do something and have a CLOBBER. */
3294 || GET_CODE (newpat) == CLOBBER
3295 /* Fail if this new pattern is a MULT and we didn't have one before
3296 at the outer level. */
3297 || (GET_CODE (newpat) == SET && GET_CODE (SET_SRC (newpat)) == MULT
3304 /* If the actions of the earlier insns must be kept
3305 in addition to substituting them into the latest one,
3306 we must make a new PARALLEL for the latest insn
3307 to hold additional the SETs. */
3309 if (added_sets_0 || added_sets_1 || added_sets_2)
3311 int extra_sets = added_sets_0 + added_sets_1 + added_sets_2;
3314 if (GET_CODE (newpat) == PARALLEL)
3316 rtvec old = XVEC (newpat, 0);
3317 total_sets = XVECLEN (newpat, 0) + extra_sets;
3318 newpat = gen_rtx_PARALLEL (VOIDmode, rtvec_alloc (total_sets));
3319 memcpy (XVEC (newpat, 0)->elem, &old->elem[0],
3320 sizeof (old->elem[0]) * old->num_elem);
3325 total_sets = 1 + extra_sets;
3326 newpat = gen_rtx_PARALLEL (VOIDmode, rtvec_alloc (total_sets));
3327 XVECEXP (newpat, 0, 0) = old;
3331 XVECEXP (newpat, 0, --total_sets) = i0pat;
3337 t = subst (t, i0dest, i0src, 0, 0, 0);
3339 XVECEXP (newpat, 0, --total_sets) = t;
3345 t = subst (t, i1dest, i1src_copy ? i1src_copy : i1src, 0, 0,
3346 i0_feeds_i1_n && i0dest_in_i0src);
3347 if ((i0_feeds_i1_n && i1_feeds_i2_n) || i0_feeds_i2_n)
3348 t = subst (t, i0dest, i0src, 0, 0, 0);
3350 XVECEXP (newpat, 0, --total_sets) = t;
3354 validate_replacement:
3356 /* Note which hard regs this insn has as inputs. */
3357 mark_used_regs_combine (newpat);
3359 /* If recog_for_combine fails, it strips existing clobbers. If we'll
3360 consider splitting this pattern, we might need these clobbers. */
3361 if (i1 && GET_CODE (newpat) == PARALLEL
3362 && GET_CODE (XVECEXP (newpat, 0, XVECLEN (newpat, 0) - 1)) == CLOBBER)
3364 int len = XVECLEN (newpat, 0);
3366 newpat_vec_with_clobbers = rtvec_alloc (len);
3367 for (i = 0; i < len; i++)
3368 RTVEC_ELT (newpat_vec_with_clobbers, i) = XVECEXP (newpat, 0, i);
3371 /* Is the result of combination a valid instruction? */
3372 insn_code_number = recog_for_combine (&newpat, i3, &new_i3_notes);
3374 /* If the result isn't valid, see if it is a PARALLEL of two SETs where
3375 the second SET's destination is a register that is unused and isn't
3376 marked as an instruction that might trap in an EH region. In that case,
3377 we just need the first SET. This can occur when simplifying a divmod
3378 insn. We *must* test for this case here because the code below that
3379 splits two independent SETs doesn't handle this case correctly when it
3380 updates the register status.
3382 It's pointless doing this if we originally had two sets, one from
3383 i3, and one from i2. Combining then splitting the parallel results
3384 in the original i2 again plus an invalid insn (which we delete).
3385 The net effect is only to move instructions around, which makes
3386 debug info less accurate.
3388 Also check the case where the first SET's destination is unused.
3389 That would not cause incorrect code, but does cause an unneeded
3392 if (insn_code_number < 0
3393 && !(added_sets_2 && i1 == 0)
3394 && GET_CODE (newpat) == PARALLEL
3395 && XVECLEN (newpat, 0) == 2
3396 && GET_CODE (XVECEXP (newpat, 0, 0)) == SET
3397 && GET_CODE (XVECEXP (newpat, 0, 1)) == SET
3398 && asm_noperands (newpat) < 0)
3400 rtx set0 = XVECEXP (newpat, 0, 0);
3401 rtx set1 = XVECEXP (newpat, 0, 1);
3403 if (((REG_P (SET_DEST (set1))
3404 && find_reg_note (i3, REG_UNUSED, SET_DEST (set1)))
3405 || (GET_CODE (SET_DEST (set1)) == SUBREG
3406 && find_reg_note (i3, REG_UNUSED, SUBREG_REG (SET_DEST (set1)))))
3407 && insn_nothrow_p (i3)
3408 && !side_effects_p (SET_SRC (set1)))
3411 insn_code_number = recog_for_combine (&newpat, i3, &new_i3_notes);
3414 else if (((REG_P (SET_DEST (set0))
3415 && find_reg_note (i3, REG_UNUSED, SET_DEST (set0)))
3416 || (GET_CODE (SET_DEST (set0)) == SUBREG
3417 && find_reg_note (i3, REG_UNUSED,
3418 SUBREG_REG (SET_DEST (set0)))))
3419 && insn_nothrow_p (i3)
3420 && !side_effects_p (SET_SRC (set0)))
3423 insn_code_number = recog_for_combine (&newpat, i3, &new_i3_notes);
3425 if (insn_code_number >= 0)
3426 changed_i3_dest = 1;
3430 /* If we were combining three insns and the result is a simple SET
3431 with no ASM_OPERANDS that wasn't recognized, try to split it into two
3432 insns. There are two ways to do this. It can be split using a
3433 machine-specific method (like when you have an addition of a large
3434 constant) or by combine in the function find_split_point. */
3436 if (i1 && insn_code_number < 0 && GET_CODE (newpat) == SET
3437 && asm_noperands (newpat) < 0)
3439 rtx parallel, m_split, *split;
3441 /* See if the MD file can split NEWPAT. If it can't, see if letting it
3442 use I2DEST as a scratch register will help. In the latter case,
3443 convert I2DEST to the mode of the source of NEWPAT if we can. */
3445 m_split = combine_split_insns (newpat, i3);
3447 /* We can only use I2DEST as a scratch reg if it doesn't overlap any
3448 inputs of NEWPAT. */
3450 /* ??? If I2DEST is not safe, and I1DEST exists, then it would be
3451 possible to try that as a scratch reg. This would require adding
3452 more code to make it work though. */
3454 if (m_split == 0 && ! reg_overlap_mentioned_p (i2dest, newpat))
3456 enum machine_mode new_mode = GET_MODE (SET_DEST (newpat));
3458 /* First try to split using the original register as a
3459 scratch register. */
3460 parallel = gen_rtx_PARALLEL (VOIDmode,
3461 gen_rtvec (2, newpat,
3462 gen_rtx_CLOBBER (VOIDmode,
3464 m_split = combine_split_insns (parallel, i3);
3466 /* If that didn't work, try changing the mode of I2DEST if
3469 && new_mode != GET_MODE (i2dest)
3470 && new_mode != VOIDmode
3471 && can_change_dest_mode (i2dest, added_sets_2, new_mode))
3473 enum machine_mode old_mode = GET_MODE (i2dest);
3476 if (REGNO (i2dest) < FIRST_PSEUDO_REGISTER)
3477 ni2dest = gen_rtx_REG (new_mode, REGNO (i2dest));
3480 SUBST_MODE (regno_reg_rtx[REGNO (i2dest)], new_mode);
3481 ni2dest = regno_reg_rtx[REGNO (i2dest)];
3484 parallel = (gen_rtx_PARALLEL
3486 gen_rtvec (2, newpat,
3487 gen_rtx_CLOBBER (VOIDmode,
3489 m_split = combine_split_insns (parallel, i3);
3492 && REGNO (i2dest) >= FIRST_PSEUDO_REGISTER)
3496 adjust_reg_mode (regno_reg_rtx[REGNO (i2dest)], old_mode);
3497 buf = undobuf.undos;
3498 undobuf.undos = buf->next;
3499 buf->next = undobuf.frees;
3500 undobuf.frees = buf;
3504 i2scratch = m_split != 0;
3507 /* If recog_for_combine has discarded clobbers, try to use them
3508 again for the split. */
3509 if (m_split == 0 && newpat_vec_with_clobbers)
3511 parallel = gen_rtx_PARALLEL (VOIDmode, newpat_vec_with_clobbers);
3512 m_split = combine_split_insns (parallel, i3);
3515 if (m_split && NEXT_INSN (m_split) == NULL_RTX)
3517 m_split = PATTERN (m_split);
3518 insn_code_number = recog_for_combine (&m_split, i3, &new_i3_notes);
3519 if (insn_code_number >= 0)
3522 else if (m_split && NEXT_INSN (NEXT_INSN (m_split)) == NULL_RTX
3523 && (next_nonnote_nondebug_insn (i2) == i3
3524 || ! use_crosses_set_p (PATTERN (m_split), DF_INSN_LUID (i2))))
3527 rtx newi3pat = PATTERN (NEXT_INSN (m_split));
3528 newi2pat = PATTERN (m_split);
3530 i3set = single_set (NEXT_INSN (m_split));
3531 i2set = single_set (m_split);
3533 i2_code_number = recog_for_combine (&newi2pat, i2, &new_i2_notes);
3535 /* If I2 or I3 has multiple SETs, we won't know how to track
3536 register status, so don't use these insns. If I2's destination
3537 is used between I2 and I3, we also can't use these insns. */
3539 if (i2_code_number >= 0 && i2set && i3set
3540 && (next_nonnote_nondebug_insn (i2) == i3
3541 || ! reg_used_between_p (SET_DEST (i2set), i2, i3)))
3542 insn_code_number = recog_for_combine (&newi3pat, i3,
3544 if (insn_code_number >= 0)
3547 /* It is possible that both insns now set the destination of I3.
3548 If so, we must show an extra use of it. */
3550 if (insn_code_number >= 0)
3552 rtx new_i3_dest = SET_DEST (i3set);
3553 rtx new_i2_dest = SET_DEST (i2set);
3555 while (GET_CODE (new_i3_dest) == ZERO_EXTRACT
3556 || GET_CODE (new_i3_dest) == STRICT_LOW_PART
3557 || GET_CODE (new_i3_dest) == SUBREG)
3558 new_i3_dest = XEXP (new_i3_dest, 0);
3560 while (GET_CODE (new_i2_dest) == ZERO_EXTRACT
3561 || GET_CODE (new_i2_dest) == STRICT_LOW_PART
3562 || GET_CODE (new_i2_dest) == SUBREG)
3563 new_i2_dest = XEXP (new_i2_dest, 0);
3565 if (REG_P (new_i3_dest)
3566 && REG_P (new_i2_dest)
3567 && REGNO (new_i3_dest) == REGNO (new_i2_dest))
3568 INC_REG_N_SETS (REGNO (new_i2_dest), 1);
3572 /* If we can split it and use I2DEST, go ahead and see if that
3573 helps things be recognized. Verify that none of the registers
3574 are set between I2 and I3. */
3575 if (insn_code_number < 0
3576 && (split = find_split_point (&newpat, i3, false)) != 0
3580 /* We need I2DEST in the proper mode. If it is a hard register
3581 or the only use of a pseudo, we can change its mode.
3582 Make sure we don't change a hard register to have a mode that
3583 isn't valid for it, or change the number of registers. */
3584 && (GET_MODE (*split) == GET_MODE (i2dest)
3585 || GET_MODE (*split) == VOIDmode
3586 || can_change_dest_mode (i2dest, added_sets_2,
3588 && (next_nonnote_nondebug_insn (i2) == i3
3589 || ! use_crosses_set_p (*split, DF_INSN_LUID (i2)))
3590 /* We can't overwrite I2DEST if its value is still used by
3592 && ! reg_referenced_p (i2dest, newpat))
3594 rtx newdest = i2dest;
3595 enum rtx_code split_code = GET_CODE (*split);
3596 enum machine_mode split_mode = GET_MODE (*split);
3597 bool subst_done = false;
3598 newi2pat = NULL_RTX;
3602 /* *SPLIT may be part of I2SRC, so make sure we have the
3603 original expression around for later debug processing.
3604 We should not need I2SRC any more in other cases. */
3605 if (MAY_HAVE_DEBUG_INSNS)
3606 i2src = copy_rtx (i2src);
3610 /* Get NEWDEST as a register in the proper mode. We have already
3611 validated that we can do this. */
3612 if (GET_MODE (i2dest) != split_mode && split_mode != VOIDmode)
3614 if (REGNO (i2dest) < FIRST_PSEUDO_REGISTER)
3615 newdest = gen_rtx_REG (split_mode, REGNO (i2dest));
3618 SUBST_MODE (regno_reg_rtx[REGNO (i2dest)], split_mode);
3619 newdest = regno_reg_rtx[REGNO (i2dest)];
3623 /* If *SPLIT is a (mult FOO (const_int pow2)), convert it to
3624 an ASHIFT. This can occur if it was inside a PLUS and hence
3625 appeared to be a memory address. This is a kludge. */
3626 if (split_code == MULT
3627 && CONST_INT_P (XEXP (*split, 1))
3628 && INTVAL (XEXP (*split, 1)) > 0
3629 && (i = exact_log2 (UINTVAL (XEXP (*split, 1)))) >= 0)
3631 SUBST (*split, gen_rtx_ASHIFT (split_mode,
3632 XEXP (*split, 0), GEN_INT (i)));
3633 /* Update split_code because we may not have a multiply
3635 split_code = GET_CODE (*split);
3638 #ifdef INSN_SCHEDULING
3639 /* If *SPLIT is a paradoxical SUBREG, when we split it, it should
3640 be written as a ZERO_EXTEND. */
3641 if (split_code == SUBREG && MEM_P (SUBREG_REG (*split)))
3643 #ifdef LOAD_EXTEND_OP
3644 /* Or as a SIGN_EXTEND if LOAD_EXTEND_OP says that that's
3645 what it really is. */
3646 if (LOAD_EXTEND_OP (GET_MODE (SUBREG_REG (*split)))
3648 SUBST (*split, gen_rtx_SIGN_EXTEND (split_mode,
3649 SUBREG_REG (*split)));
3652 SUBST (*split, gen_rtx_ZERO_EXTEND (split_mode,
3653 SUBREG_REG (*split)));
3657 /* Attempt to split binary operators using arithmetic identities. */
3658 if (BINARY_P (SET_SRC (newpat))
3659 && split_mode == GET_MODE (SET_SRC (newpat))
3660 && ! side_effects_p (SET_SRC (newpat)))
3662 rtx setsrc = SET_SRC (newpat);
3663 enum machine_mode mode = GET_MODE (setsrc);
3664 enum rtx_code code = GET_CODE (setsrc);
3665 rtx src_op0 = XEXP (setsrc, 0);
3666 rtx src_op1 = XEXP (setsrc, 1);
3668 /* Split "X = Y op Y" as "Z = Y; X = Z op Z". */
3669 if (rtx_equal_p (src_op0, src_op1))
3671 newi2pat = gen_rtx_SET (VOIDmode, newdest, src_op0);
3672 SUBST (XEXP (setsrc, 0), newdest);
3673 SUBST (XEXP (setsrc, 1), newdest);
3676 /* Split "((P op Q) op R) op S" where op is PLUS or MULT. */
3677 else if ((code == PLUS || code == MULT)
3678 && GET_CODE (src_op0) == code
3679 && GET_CODE (XEXP (src_op0, 0)) == code
3680 && (INTEGRAL_MODE_P (mode)
3681 || (FLOAT_MODE_P (mode)
3682 && flag_unsafe_math_optimizations)))
3684 rtx p = XEXP (XEXP (src_op0, 0), 0);
3685 rtx q = XEXP (XEXP (src_op0, 0), 1);
3686 rtx r = XEXP (src_op0, 1);
3689 /* Split both "((X op Y) op X) op Y" and
3690 "((X op Y) op Y) op X" as "T op T" where T is
3692 if ((rtx_equal_p (p,r) && rtx_equal_p (q,s))
3693 || (rtx_equal_p (p,s) && rtx_equal_p (q,r)))
3695 newi2pat = gen_rtx_SET (VOIDmode, newdest,
3697 SUBST (XEXP (setsrc, 0), newdest);
3698 SUBST (XEXP (setsrc, 1), newdest);
3701 /* Split "((X op X) op Y) op Y)" as "T op T" where
3703 else if (rtx_equal_p (p,q) && rtx_equal_p (r,s))
3705 rtx tmp = simplify_gen_binary (code, mode, p, r);
3706 newi2pat = gen_rtx_SET (VOIDmode, newdest, tmp);
3707 SUBST (XEXP (setsrc, 0), newdest);
3708 SUBST (XEXP (setsrc, 1), newdest);
3716 newi2pat = gen_rtx_SET (VOIDmode, newdest, *split);
3717 SUBST (*split, newdest);
3720 i2_code_number = recog_for_combine (&newi2pat, i2, &new_i2_notes);
3722 /* recog_for_combine might have added CLOBBERs to newi2pat.
3723 Make sure NEWPAT does not depend on the clobbered regs. */
3724 if (GET_CODE (newi2pat) == PARALLEL)
3725 for (i = XVECLEN (newi2pat, 0) - 1; i >= 0; i--)
3726 if (GET_CODE (XVECEXP (newi2pat, 0, i)) == CLOBBER)
3728 rtx reg = XEXP (XVECEXP (newi2pat, 0, i), 0);
3729 if (reg_overlap_mentioned_p (reg, newpat))
3736 /* If the split point was a MULT and we didn't have one before,
3737 don't use one now. */
3738 if (i2_code_number >= 0 && ! (split_code == MULT && ! have_mult))
3739 insn_code_number = recog_for_combine (&newpat, i3, &new_i3_notes);
3743 /* Check for a case where we loaded from memory in a narrow mode and
3744 then sign extended it, but we need both registers. In that case,
3745 we have a PARALLEL with both loads from the same memory location.
3746 We can split this into a load from memory followed by a register-register
3747 copy. This saves at least one insn, more if register allocation can
3750 We cannot do this if the destination of the first assignment is a
3751 condition code register or cc0. We eliminate this case by making sure
3752 the SET_DEST and SET_SRC have the same mode.
3754 We cannot do this if the destination of the second assignment is
3755 a register that we have already assumed is zero-extended. Similarly
3756 for a SUBREG of such a register. */
3758 else if (i1 && insn_code_number < 0 && asm_noperands (newpat) < 0
3759 && GET_CODE (newpat) == PARALLEL
3760 && XVECLEN (newpat, 0) == 2
3761 && GET_CODE (XVECEXP (newpat, 0, 0)) == SET
3762 && GET_CODE (SET_SRC (XVECEXP (newpat, 0, 0))) == SIGN_EXTEND
3763 && (GET_MODE (SET_DEST (XVECEXP (newpat, 0, 0)))
3764 == GET_MODE (SET_SRC (XVECEXP (newpat, 0, 0))))
3765 && GET_CODE (XVECEXP (newpat, 0, 1)) == SET
3766 && rtx_equal_p (SET_SRC (XVECEXP (newpat, 0, 1)),
3767 XEXP (SET_SRC (XVECEXP (newpat, 0, 0)), 0))
3768 && ! use_crosses_set_p (SET_SRC (XVECEXP (newpat, 0, 1)),
3770 && GET_CODE (SET_DEST (XVECEXP (newpat, 0, 1))) != ZERO_EXTRACT
3771 && GET_CODE (SET_DEST (XVECEXP (newpat, 0, 1))) != STRICT_LOW_PART
3772 && ! (temp = SET_DEST (XVECEXP (newpat, 0, 1)),
3774 && VEC_index (reg_stat_type, reg_stat,
3775 REGNO (temp))->nonzero_bits != 0
3776 && GET_MODE_PRECISION (GET_MODE (temp)) < BITS_PER_WORD
3777 && GET_MODE_PRECISION (GET_MODE (temp)) < HOST_BITS_PER_INT
3778 && (VEC_index (reg_stat_type, reg_stat,
3779 REGNO (temp))->nonzero_bits
3780 != GET_MODE_MASK (word_mode))))
3781 && ! (GET_CODE (SET_DEST (XVECEXP (newpat, 0, 1))) == SUBREG
3782 && (temp = SUBREG_REG (SET_DEST (XVECEXP (newpat, 0, 1))),
3784 && VEC_index (reg_stat_type, reg_stat,
3785 REGNO (temp))->nonzero_bits != 0
3786 && GET_MODE_PRECISION (GET_MODE (temp)) < BITS_PER_WORD
3787 && GET_MODE_PRECISION (GET_MODE (temp)) < HOST_BITS_PER_INT
3788 && (VEC_index (reg_stat_type, reg_stat,
3789 REGNO (temp))->nonzero_bits
3790 != GET_MODE_MASK (word_mode)))))
3791 && ! reg_overlap_mentioned_p (SET_DEST (XVECEXP (newpat, 0, 1)),
3792 SET_SRC (XVECEXP (newpat, 0, 1)))
3793 && ! find_reg_note (i3, REG_UNUSED,
3794 SET_DEST (XVECEXP (newpat, 0, 0))))
3798 newi2pat = XVECEXP (newpat, 0, 0);
3799 ni2dest = SET_DEST (XVECEXP (newpat, 0, 0));
3800 newpat = XVECEXP (newpat, 0, 1);
3801 SUBST (SET_SRC (newpat),
3802 gen_lowpart (GET_MODE (SET_SRC (newpat)), ni2dest));
3803 i2_code_number = recog_for_combine (&newi2pat, i2, &new_i2_notes);
3805 if (i2_code_number >= 0)
3806 insn_code_number = recog_for_combine (&newpat, i3, &new_i3_notes);
3808 if (insn_code_number >= 0)
3812 /* Similarly, check for a case where we have a PARALLEL of two independent
3813 SETs but we started with three insns. In this case, we can do the sets
3814 as two separate insns. This case occurs when some SET allows two
3815 other insns to combine, but the destination of that SET is still live. */
3817 else if (i1 && insn_code_number < 0 && asm_noperands (newpat) < 0
3818 && GET_CODE (newpat) == PARALLEL
3819 && XVECLEN (newpat, 0) == 2
3820 && GET_CODE (XVECEXP (newpat, 0, 0)) == SET
3821 && GET_CODE (SET_DEST (XVECEXP (newpat, 0, 0))) != ZERO_EXTRACT
3822 && GET_CODE (SET_DEST (XVECEXP (newpat, 0, 0))) != STRICT_LOW_PART
3823 && GET_CODE (XVECEXP (newpat, 0, 1)) == SET
3824 && GET_CODE (SET_DEST (XVECEXP (newpat, 0, 1))) != ZERO_EXTRACT
3825 && GET_CODE (SET_DEST (XVECEXP (newpat, 0, 1))) != STRICT_LOW_PART
3826 && ! reg_referenced_p (SET_DEST (XVECEXP (newpat, 0, 1)),
3827 XVECEXP (newpat, 0, 0))
3828 && ! reg_referenced_p (SET_DEST (XVECEXP (newpat, 0, 0)),
3829 XVECEXP (newpat, 0, 1))
3830 && ! (contains_muldiv (SET_SRC (XVECEXP (newpat, 0, 0)))
3831 && contains_muldiv (SET_SRC (XVECEXP (newpat, 0, 1)))))
3833 /* Normally, it doesn't matter which of the two is done first,
3834 but the one that references cc0 can't be the second, and
3835 one which uses any regs/memory set in between i2 and i3 can't
3837 if (!use_crosses_set_p (SET_SRC (XVECEXP (newpat, 0, 1)),
3840 && !reg_referenced_p (cc0_rtx, XVECEXP (newpat, 0, 0))
3844 newi2pat = XVECEXP (newpat, 0, 1);
3845 newpat = XVECEXP (newpat, 0, 0);
3847 else if (!use_crosses_set_p (SET_SRC (XVECEXP (newpat, 0, 0)),
3850 && !reg_referenced_p (cc0_rtx, XVECEXP (newpat, 0, 1))
3854 newi2pat = XVECEXP (newpat, 0, 0);
3855 newpat = XVECEXP (newpat, 0, 1);
3863 i2_code_number = recog_for_combine (&newi2pat, i2, &new_i2_notes);
3865 if (i2_code_number >= 0)
3867 /* recog_for_combine might have added CLOBBERs to newi2pat.
3868 Make sure NEWPAT does not depend on the clobbered regs. */
3869 if (GET_CODE (newi2pat) == PARALLEL)
3871 for (i = XVECLEN (newi2pat, 0) - 1; i >= 0; i--)
3872 if (GET_CODE (XVECEXP (newi2pat, 0, i)) == CLOBBER)
3874 rtx reg = XEXP (XVECEXP (newi2pat, 0, i), 0);
3875 if (reg_overlap_mentioned_p (reg, newpat))
3883 insn_code_number = recog_for_combine (&newpat, i3, &new_i3_notes);
3887 /* If it still isn't recognized, fail and change things back the way they
3889 if ((insn_code_number < 0
3890 /* Is the result a reasonable ASM_OPERANDS? */
3891 && (! check_asm_operands (newpat) || added_sets_1 || added_sets_2)))
3897 /* If we had to change another insn, make sure it is valid also. */
3898 if (undobuf.other_insn)
3900 CLEAR_HARD_REG_SET (newpat_used_regs);
3902 other_pat = PATTERN (undobuf.other_insn);
3903 other_code_number = recog_for_combine (&other_pat, undobuf.other_insn,
3906 if (other_code_number < 0 && ! check_asm_operands (other_pat))
3914 /* If I2 is the CC0 setter and I3 is the CC0 user then check whether
3915 they are adjacent to each other or not. */
3917 rtx p = prev_nonnote_insn (i3);
3918 if (p && p != i2 && NONJUMP_INSN_P (p) && newi2pat
3919 && sets_cc0_p (newi2pat))
3927 /* Only allow this combination if insn_rtx_costs reports that the
3928 replacement instructions are cheaper than the originals. */
3929 if (!combine_validate_cost (i0, i1, i2, i3, newpat, newi2pat, other_pat))
3935 if (MAY_HAVE_DEBUG_INSNS)
3939 for (undo = undobuf.undos; undo; undo = undo->next)
3940 if (undo->kind == UNDO_MODE)
3942 rtx reg = *undo->where.r;
3943 enum machine_mode new_mode = GET_MODE (reg);
3944 enum machine_mode old_mode = undo->old_contents.m;
3946 /* Temporarily revert mode back. */
3947 adjust_reg_mode (reg, old_mode);
3949 if (reg == i2dest && i2scratch)
3951 /* If we used i2dest as a scratch register with a
3952 different mode, substitute it for the original
3953 i2src while its original mode is temporarily
3954 restored, and then clear i2scratch so that we don't
3955 do it again later. */
3956 propagate_for_debug (i2, last_combined_insn, reg, i2src);
3958 /* Put back the new mode. */
3959 adjust_reg_mode (reg, new_mode);
3963 rtx tempreg = gen_raw_REG (old_mode, REGNO (reg));
3969 last = last_combined_insn;
3974 last = undobuf.other_insn;
3976 if (DF_INSN_LUID (last)
3977 < DF_INSN_LUID (last_combined_insn))
3978 last = last_combined_insn;
3981 /* We're dealing with a reg that changed mode but not
3982 meaning, so we want to turn it into a subreg for
3983 the new mode. However, because of REG sharing and
3984 because its mode had already changed, we have to do
3985 it in two steps. First, replace any debug uses of
3986 reg, with its original mode temporarily restored,
3987 with this copy we have created; then, replace the
3988 copy with the SUBREG of the original shared reg,
3989 once again changed to the new mode. */
3990 propagate_for_debug (first, last, reg, tempreg);
3991 adjust_reg_mode (reg, new_mode);
3992 propagate_for_debug (first, last, tempreg,
3993 lowpart_subreg (old_mode, reg, new_mode));
3998 /* If we will be able to accept this, we have made a
3999 change to the destination of I3. This requires us to
4000 do a few adjustments. */
4002 if (changed_i3_dest)
4004 PATTERN (i3) = newpat;
4005 adjust_for_new_dest (i3);
4008 /* We now know that we can do this combination. Merge the insns and
4009 update the status of registers and LOG_LINKS. */
4011 if (undobuf.other_insn)
4015 PATTERN (undobuf.other_insn) = other_pat;
4017 /* If any of the notes in OTHER_INSN were REG_UNUSED, ensure that they
4018 are still valid. Then add any non-duplicate notes added by
4019 recog_for_combine. */
4020 for (note = REG_NOTES (undobuf.other_insn); note; note = next)
4022 next = XEXP (note, 1);
4024 if (REG_NOTE_KIND (note) == REG_UNUSED
4025 && ! reg_set_p (XEXP (note, 0), PATTERN (undobuf.other_insn)))
4026 remove_note (undobuf.other_insn, note);
4029 distribute_notes (new_other_notes, undobuf.other_insn,
4030 undobuf.other_insn, NULL_RTX, NULL_RTX, NULL_RTX,
4037 struct insn_link *link;
4040 /* I3 now uses what used to be its destination and which is now
4041 I2's destination. This requires us to do a few adjustments. */
4042 PATTERN (i3) = newpat;
4043 adjust_for_new_dest (i3);
4045 /* We need a LOG_LINK from I3 to I2. But we used to have one,
4048 However, some later insn might be using I2's dest and have
4049 a LOG_LINK pointing at I3. We must remove this link.
4050 The simplest way to remove the link is to point it at I1,
4051 which we know will be a NOTE. */
4053 /* newi2pat is usually a SET here; however, recog_for_combine might
4054 have added some clobbers. */
4055 if (GET_CODE (newi2pat) == PARALLEL)
4056 ni2dest = SET_DEST (XVECEXP (newi2pat, 0, 0));
4058 ni2dest = SET_DEST (newi2pat);
4060 for (insn = NEXT_INSN (i3);
4061 insn && (this_basic_block->next_bb == EXIT_BLOCK_PTR
4062 || insn != BB_HEAD (this_basic_block->next_bb));
4063 insn = NEXT_INSN (insn))
4065 if (INSN_P (insn) && reg_referenced_p (ni2dest, PATTERN (insn)))
4067 FOR_EACH_LOG_LINK (link, insn)
4068 if (link->insn == i3)
4077 rtx i3notes, i2notes, i1notes = 0, i0notes = 0;
4078 struct insn_link *i3links, *i2links, *i1links = 0, *i0links = 0;
4081 /* Compute which registers we expect to eliminate. newi2pat may be setting
4082 either i3dest or i2dest, so we must check it. Also, i1dest may be the
4083 same as i3dest, in which case newi2pat may be setting i1dest. */
4084 rtx elim_i2 = ((newi2pat && reg_set_p (i2dest, newi2pat))
4085 || i2dest_in_i2src || i2dest_in_i1src || i2dest_in_i0src
4088 rtx elim_i1 = (i1 == 0 || i1dest_in_i1src || i1dest_in_i0src
4089 || (newi2pat && reg_set_p (i1dest, newi2pat))
4092 rtx elim_i0 = (i0 == 0 || i0dest_in_i0src
4093 || (newi2pat && reg_set_p (i0dest, newi2pat))
4097 /* Get the old REG_NOTES and LOG_LINKS from all our insns and
4099 i3notes = REG_NOTES (i3), i3links = LOG_LINKS (i3);
4100 i2notes = REG_NOTES (i2), i2links = LOG_LINKS (i2);
4102 i1notes = REG_NOTES (i1), i1links = LOG_LINKS (i1);
4104 i0notes = REG_NOTES (i0), i0links = LOG_LINKS (i0);
4106 /* Ensure that we do not have something that should not be shared but
4107 occurs multiple times in the new insns. Check this by first
4108 resetting all the `used' flags and then copying anything is shared. */
4110 reset_used_flags (i3notes);
4111 reset_used_flags (i2notes);
4112 reset_used_flags (i1notes);
4113 reset_used_flags (i0notes);
4114 reset_used_flags (newpat);
4115 reset_used_flags (newi2pat);
4116 if (undobuf.other_insn)
4117 reset_used_flags (PATTERN (undobuf.other_insn));
4119 i3notes = copy_rtx_if_shared (i3notes);
4120 i2notes = copy_rtx_if_shared (i2notes);
4121 i1notes = copy_rtx_if_shared (i1notes);
4122 i0notes = copy_rtx_if_shared (i0notes);
4123 newpat = copy_rtx_if_shared (newpat);
4124 newi2pat = copy_rtx_if_shared (newi2pat);
4125 if (undobuf.other_insn)
4126 reset_used_flags (PATTERN (undobuf.other_insn));
4128 INSN_CODE (i3) = insn_code_number;
4129 PATTERN (i3) = newpat;
4131 if (CALL_P (i3) && CALL_INSN_FUNCTION_USAGE (i3))
4133 rtx call_usage = CALL_INSN_FUNCTION_USAGE (i3);
4135 reset_used_flags (call_usage);
4136 call_usage = copy_rtx (call_usage);
4140 /* I2SRC must still be meaningful at this point. Some splitting
4141 operations can invalidate I2SRC, but those operations do not
4144 replace_rtx (call_usage, i2dest, i2src);
4148 replace_rtx (call_usage, i1dest, i1src);
4150 replace_rtx (call_usage, i0dest, i0src);
4152 CALL_INSN_FUNCTION_USAGE (i3) = call_usage;
4155 if (undobuf.other_insn)
4156 INSN_CODE (undobuf.other_insn) = other_code_number;
4158 /* We had one special case above where I2 had more than one set and
4159 we replaced a destination of one of those sets with the destination
4160 of I3. In that case, we have to update LOG_LINKS of insns later
4161 in this basic block. Note that this (expensive) case is rare.
4163 Also, in this case, we must pretend that all REG_NOTEs for I2
4164 actually came from I3, so that REG_UNUSED notes from I2 will be
4165 properly handled. */
4167 if (i3_subst_into_i2)
4169 for (i = 0; i < XVECLEN (PATTERN (i2), 0); i++)
4170 if ((GET_CODE (XVECEXP (PATTERN (i2), 0, i)) == SET
4171 || GET_CODE (XVECEXP (PATTERN (i2), 0, i)) == CLOBBER)
4172 && REG_P (SET_DEST (XVECEXP (PATTERN (i2), 0, i)))
4173 && SET_DEST (XVECEXP (PATTERN (i2), 0, i)) != i2dest
4174 && ! find_reg_note (i2, REG_UNUSED,
4175 SET_DEST (XVECEXP (PATTERN (i2), 0, i))))
4176 for (temp = NEXT_INSN (i2);
4177 temp && (this_basic_block->next_bb == EXIT_BLOCK_PTR
4178 || BB_HEAD (this_basic_block) != temp);
4179 temp = NEXT_INSN (temp))
4180 if (temp != i3 && INSN_P (temp))
4181 FOR_EACH_LOG_LINK (link, temp)
4182 if (link->insn == i2)
4188 while (XEXP (link, 1))
4189 link = XEXP (link, 1);
4190 XEXP (link, 1) = i2notes;
4197 LOG_LINKS (i3) = NULL;
4199 LOG_LINKS (i2) = NULL;
4204 if (MAY_HAVE_DEBUG_INSNS && i2scratch)
4205 propagate_for_debug (i2, last_combined_insn, i2dest, i2src);
4206 INSN_CODE (i2) = i2_code_number;
4207 PATTERN (i2) = newi2pat;
4211 if (MAY_HAVE_DEBUG_INSNS && i2src)
4212 propagate_for_debug (i2, last_combined_insn, i2dest, i2src);
4213 SET_INSN_DELETED (i2);
4218 LOG_LINKS (i1) = NULL;
4220 if (MAY_HAVE_DEBUG_INSNS)
4221 propagate_for_debug (i1, last_combined_insn, i1dest, i1src);
4222 SET_INSN_DELETED (i1);
4227 LOG_LINKS (i0) = NULL;
4229 if (MAY_HAVE_DEBUG_INSNS)
4230 propagate_for_debug (i0, last_combined_insn, i0dest, i0src);
4231 SET_INSN_DELETED (i0);
4234 /* Get death notes for everything that is now used in either I3 or
4235 I2 and used to die in a previous insn. If we built two new
4236 patterns, move from I1 to I2 then I2 to I3 so that we get the
4237 proper movement on registers that I2 modifies. */
4240 from_luid = DF_INSN_LUID (i0);
4242 from_luid = DF_INSN_LUID (i1);
4244 from_luid = DF_INSN_LUID (i2);
4246 move_deaths (newi2pat, NULL_RTX, from_luid, i2, &midnotes);
4247 move_deaths (newpat, newi2pat, from_luid, i3, &midnotes);
4249 /* Distribute all the LOG_LINKS and REG_NOTES from I1, I2, and I3. */
4251 distribute_notes (i3notes, i3, i3, newi2pat ? i2 : NULL_RTX,
4252 elim_i2, elim_i1, elim_i0);
4254 distribute_notes (i2notes, i2, i3, newi2pat ? i2 : NULL_RTX,
4255 elim_i2, elim_i1, elim_i0);
4257 distribute_notes (i1notes, i1, i3, newi2pat ? i2 : NULL_RTX,
4258 elim_i2, elim_i1, elim_i0);
4260 distribute_notes (i0notes, i0, i3, newi2pat ? i2 : NULL_RTX,
4261 elim_i2, elim_i1, elim_i0);
4263 distribute_notes (midnotes, NULL_RTX, i3, newi2pat ? i2 : NULL_RTX,
4264 elim_i2, elim_i1, elim_i0);
4266 /* Distribute any notes added to I2 or I3 by recog_for_combine. We
4267 know these are REG_UNUSED and want them to go to the desired insn,
4268 so we always pass it as i3. */
4270 if (newi2pat && new_i2_notes)
4271 distribute_notes (new_i2_notes, i2, i2, NULL_RTX, NULL_RTX, NULL_RTX,
4275 distribute_notes (new_i3_notes, i3, i3, NULL_RTX, NULL_RTX, NULL_RTX,
4278 /* If I3DEST was used in I3SRC, it really died in I3. We may need to
4279 put a REG_DEAD note for it somewhere. If NEWI2PAT exists and sets
4280 I3DEST, the death must be somewhere before I2, not I3. If we passed I3
4281 in that case, it might delete I2. Similarly for I2 and I1.
4282 Show an additional death due to the REG_DEAD note we make here. If
4283 we discard it in distribute_notes, we will decrement it again. */
4287 if (newi2pat && reg_set_p (i3dest_killed, newi2pat))
4288 distribute_notes (alloc_reg_note (REG_DEAD, i3dest_killed,
4290 NULL_RTX, i2, NULL_RTX, elim_i2, elim_i1, elim_i0);
4292 distribute_notes (alloc_reg_note (REG_DEAD, i3dest_killed,
4294 NULL_RTX, i3, newi2pat ? i2 : NULL_RTX,
4295 elim_i2, elim_i1, elim_i0);
4298 if (i2dest_in_i2src)
4300 rtx new_note = alloc_reg_note (REG_DEAD, i2dest, NULL_RTX);
4301 if (newi2pat && reg_set_p (i2dest, newi2pat))
4302 distribute_notes (new_note, NULL_RTX, i2, NULL_RTX, NULL_RTX,
4303 NULL_RTX, NULL_RTX);
4305 distribute_notes (new_note, NULL_RTX, i3, newi2pat ? i2 : NULL_RTX,
4306 NULL_RTX, NULL_RTX, NULL_RTX);
4309 if (i1dest_in_i1src)
4311 rtx new_note = alloc_reg_note (REG_DEAD, i1dest, NULL_RTX);
4312 if (newi2pat && reg_set_p (i1dest, newi2pat))
4313 distribute_notes (new_note, NULL_RTX, i2, NULL_RTX, NULL_RTX,
4314 NULL_RTX, NULL_RTX);
4316 distribute_notes (new_note, NULL_RTX, i3, newi2pat ? i2 : NULL_RTX,
4317 NULL_RTX, NULL_RTX, NULL_RTX);
4320 if (i0dest_in_i0src)
4322 rtx new_note = alloc_reg_note (REG_DEAD, i0dest, NULL_RTX);
4323 if (newi2pat && reg_set_p (i0dest, newi2pat))
4324 distribute_notes (new_note, NULL_RTX, i2, NULL_RTX, NULL_RTX,
4325 NULL_RTX, NULL_RTX);
4327 distribute_notes (new_note, NULL_RTX, i3, newi2pat ? i2 : NULL_RTX,
4328 NULL_RTX, NULL_RTX, NULL_RTX);
4331 distribute_links (i3links);
4332 distribute_links (i2links);
4333 distribute_links (i1links);
4334 distribute_links (i0links);
4338 struct insn_link *link;
4339 rtx i2_insn = 0, i2_val = 0, set;
4341 /* The insn that used to set this register doesn't exist, and
4342 this life of the register may not exist either. See if one of
4343 I3's links points to an insn that sets I2DEST. If it does,
4344 that is now the last known value for I2DEST. If we don't update
4345 this and I2 set the register to a value that depended on its old
4346 contents, we will get confused. If this insn is used, thing
4347 will be set correctly in combine_instructions. */
4348 FOR_EACH_LOG_LINK (link, i3)
4349 if ((set = single_set (link->insn)) != 0
4350 && rtx_equal_p (i2dest, SET_DEST (set)))
4351 i2_insn = link->insn, i2_val = SET_SRC (set);
4353 record_value_for_reg (i2dest, i2_insn, i2_val);
4355 /* If the reg formerly set in I2 died only once and that was in I3,
4356 zero its use count so it won't make `reload' do any work. */
4358 && (newi2pat == 0 || ! reg_mentioned_p (i2dest, newi2pat))
4359 && ! i2dest_in_i2src)
4360 INC_REG_N_SETS (REGNO (i2dest), -1);
4363 if (i1 && REG_P (i1dest))
4365 struct insn_link *link;
4366 rtx i1_insn = 0, i1_val = 0, set;
4368 FOR_EACH_LOG_LINK (link, i3)
4369 if ((set = single_set (link->insn)) != 0
4370 && rtx_equal_p (i1dest, SET_DEST (set)))
4371 i1_insn = link->insn, i1_val = SET_SRC (set);
4373 record_value_for_reg (i1dest, i1_insn, i1_val);
4375 if (! added_sets_1 && ! i1dest_in_i1src)
4376 INC_REG_N_SETS (REGNO (i1dest), -1);
4379 if (i0 && REG_P (i0dest))
4381 struct insn_link *link;
4382 rtx i0_insn = 0, i0_val = 0, set;
4384 FOR_EACH_LOG_LINK (link, i3)
4385 if ((set = single_set (link->insn)) != 0
4386 && rtx_equal_p (i0dest, SET_DEST (set)))
4387 i0_insn = link->insn, i0_val = SET_SRC (set);
4389 record_value_for_reg (i0dest, i0_insn, i0_val);
4391 if (! added_sets_0 && ! i0dest_in_i0src)
4392 INC_REG_N_SETS (REGNO (i0dest), -1);
4395 /* Update reg_stat[].nonzero_bits et al for any changes that may have
4396 been made to this insn. The order of
4397 set_nonzero_bits_and_sign_copies() is important. Because newi2pat
4398 can affect nonzero_bits of newpat */
4400 note_stores (newi2pat, set_nonzero_bits_and_sign_copies, NULL);
4401 note_stores (newpat, set_nonzero_bits_and_sign_copies, NULL);
4404 if (undobuf.other_insn != NULL_RTX)
4408 fprintf (dump_file, "modifying other_insn ");
4409 dump_insn_slim (dump_file, undobuf.other_insn);
4411 df_insn_rescan (undobuf.other_insn);
4414 if (i0 && !(NOTE_P(i0) && (NOTE_KIND (i0) == NOTE_INSN_DELETED)))
4418 fprintf (dump_file, "modifying insn i1 ");
4419 dump_insn_slim (dump_file, i0);
4421 df_insn_rescan (i0);
4424 if (i1 && !(NOTE_P(i1) && (NOTE_KIND (i1) == NOTE_INSN_DELETED)))
4428 fprintf (dump_file, "modifying insn i1 ");
4429 dump_insn_slim (dump_file, i1);
4431 df_insn_rescan (i1);
4434 if (i2 && !(NOTE_P(i2) && (NOTE_KIND (i2) == NOTE_INSN_DELETED)))
4438 fprintf (dump_file, "modifying insn i2 ");
4439 dump_insn_slim (dump_file, i2);
4441 df_insn_rescan (i2);
4444 if (i3 && !(NOTE_P(i3) && (NOTE_KIND (i3) == NOTE_INSN_DELETED)))
4448 fprintf (dump_file, "modifying insn i3 ");
4449 dump_insn_slim (dump_file, i3);
4451 df_insn_rescan (i3);
4454 /* Set new_direct_jump_p if a new return or simple jump instruction
4455 has been created. Adjust the CFG accordingly. */
4457 if (returnjump_p (i3) || any_uncondjump_p (i3))
4459 *new_direct_jump_p = 1;
4460 mark_jump_label (PATTERN (i3), i3, 0);
4461 update_cfg_for_uncondjump (i3);
4464 if (undobuf.other_insn != NULL_RTX
4465 && (returnjump_p (undobuf.other_insn)
4466 || any_uncondjump_p (undobuf.other_insn)))
4468 *new_direct_jump_p = 1;
4469 update_cfg_for_uncondjump (undobuf.other_insn);
4472 /* A noop might also need cleaning up of CFG, if it comes from the
4473 simplification of a jump. */
4475 && GET_CODE (newpat) == SET
4476 && SET_SRC (newpat) == pc_rtx
4477 && SET_DEST (newpat) == pc_rtx)
4479 *new_direct_jump_p = 1;
4480 update_cfg_for_uncondjump (i3);
4483 if (undobuf.other_insn != NULL_RTX
4484 && JUMP_P (undobuf.other_insn)
4485 && GET_CODE (PATTERN (undobuf.other_insn)) == SET
4486 && SET_SRC (PATTERN (undobuf.other_insn)) == pc_rtx
4487 && SET_DEST (PATTERN (undobuf.other_insn)) == pc_rtx)
4489 *new_direct_jump_p = 1;
4490 update_cfg_for_uncondjump (undobuf.other_insn);
4493 combine_successes++;
4496 if (added_links_insn
4497 && (newi2pat == 0 || DF_INSN_LUID (added_links_insn) < DF_INSN_LUID (i2))
4498 && DF_INSN_LUID (added_links_insn) < DF_INSN_LUID (i3))
4499 return added_links_insn;
4501 return newi2pat ? i2 : i3;
4504 /* Undo all the modifications recorded in undobuf. */
4509 struct undo *undo, *next;
4511 for (undo = undobuf.undos; undo; undo = next)
4517 *undo->where.r = undo->old_contents.r;
4520 *undo->where.i = undo->old_contents.i;
4523 adjust_reg_mode (*undo->where.r, undo->old_contents.m);
4526 *undo->where.l = undo->old_contents.l;
4532 undo->next = undobuf.frees;
4533 undobuf.frees = undo;
4539 /* We've committed to accepting the changes we made. Move all
4540 of the undos to the free list. */
4545 struct undo *undo, *next;
4547 for (undo = undobuf.undos; undo; undo = next)
4550 undo->next = undobuf.frees;
4551 undobuf.frees = undo;
4556 /* Find the innermost point within the rtx at LOC, possibly LOC itself,
4557 where we have an arithmetic expression and return that point. LOC will
4560 try_combine will call this function to see if an insn can be split into
4564 find_split_point (rtx *loc, rtx insn, bool set_src)
4567 enum rtx_code code = GET_CODE (x);
4569 unsigned HOST_WIDE_INT len = 0;
4570 HOST_WIDE_INT pos = 0;
4572 rtx inner = NULL_RTX;
4574 /* First special-case some codes. */
4578 #ifdef INSN_SCHEDULING
4579 /* If we are making a paradoxical SUBREG invalid, it becomes a split
4581 if (MEM_P (SUBREG_REG (x)))
4584 return find_split_point (&SUBREG_REG (x), insn, false);
4588 /* If we have (mem (const ..)) or (mem (symbol_ref ...)), split it
4589 using LO_SUM and HIGH. */
4590 if (GET_CODE (XEXP (x, 0)) == CONST
4591 || GET_CODE (XEXP (x, 0)) == SYMBOL_REF)
4593 enum machine_mode address_mode
4594 = targetm.addr_space.address_mode (MEM_ADDR_SPACE (x));
4597 gen_rtx_LO_SUM (address_mode,
4598 gen_rtx_HIGH (address_mode, XEXP (x, 0)),
4600 return &XEXP (XEXP (x, 0), 0);
4604 /* If we have a PLUS whose second operand is a constant and the
4605 address is not valid, perhaps will can split it up using
4606 the machine-specific way to split large constants. We use
4607 the first pseudo-reg (one of the virtual regs) as a placeholder;
4608 it will not remain in the result. */
4609 if (GET_CODE (XEXP (x, 0)) == PLUS
4610 && CONST_INT_P (XEXP (XEXP (x, 0), 1))
4611 && ! memory_address_addr_space_p (GET_MODE (x), XEXP (x, 0),
4612 MEM_ADDR_SPACE (x)))
4614 rtx reg = regno_reg_rtx[FIRST_PSEUDO_REGISTER];
4615 rtx seq = combine_split_insns (gen_rtx_SET (VOIDmode, reg,
4619 /* This should have produced two insns, each of which sets our
4620 placeholder. If the source of the second is a valid address,
4621 we can make put both sources together and make a split point
4625 && NEXT_INSN (seq) != NULL_RTX
4626 && NEXT_INSN (NEXT_INSN (seq)) == NULL_RTX
4627 && NONJUMP_INSN_P (seq)
4628 && GET_CODE (PATTERN (seq)) == SET
4629 && SET_DEST (PATTERN (seq)) == reg
4630 && ! reg_mentioned_p (reg,
4631 SET_SRC (PATTERN (seq)))
4632 && NONJUMP_INSN_P (NEXT_INSN (seq))
4633 && GET_CODE (PATTERN (NEXT_INSN (seq))) == SET
4634 && SET_DEST (PATTERN (NEXT_INSN (seq))) == reg
4635 && memory_address_addr_space_p
4636 (GET_MODE (x), SET_SRC (PATTERN (NEXT_INSN (seq))),
4637 MEM_ADDR_SPACE (x)))
4639 rtx src1 = SET_SRC (PATTERN (seq));
4640 rtx src2 = SET_SRC (PATTERN (NEXT_INSN (seq)));
4642 /* Replace the placeholder in SRC2 with SRC1. If we can
4643 find where in SRC2 it was placed, that can become our
4644 split point and we can replace this address with SRC2.
4645 Just try two obvious places. */
4647 src2 = replace_rtx (src2, reg, src1);
4649 if (XEXP (src2, 0) == src1)
4650 split = &XEXP (src2, 0);
4651 else if (GET_RTX_FORMAT (GET_CODE (XEXP (src2, 0)))[0] == 'e'
4652 && XEXP (XEXP (src2, 0), 0) == src1)
4653 split = &XEXP (XEXP (src2, 0), 0);
4657 SUBST (XEXP (x, 0), src2);
4662 /* If that didn't work, perhaps the first operand is complex and
4663 needs to be computed separately, so make a split point there.
4664 This will occur on machines that just support REG + CONST
4665 and have a constant moved through some previous computation. */
4667 else if (!OBJECT_P (XEXP (XEXP (x, 0), 0))
4668 && ! (GET_CODE (XEXP (XEXP (x, 0), 0)) == SUBREG
4669 && OBJECT_P (SUBREG_REG (XEXP (XEXP (x, 0), 0)))))
4670 return &XEXP (XEXP (x, 0), 0);
4673 /* If we have a PLUS whose first operand is complex, try computing it
4674 separately by making a split there. */
4675 if (GET_CODE (XEXP (x, 0)) == PLUS
4676 && ! memory_address_addr_space_p (GET_MODE (x), XEXP (x, 0),
4678 && ! OBJECT_P (XEXP (XEXP (x, 0), 0))
4679 && ! (GET_CODE (XEXP (XEXP (x, 0), 0)) == SUBREG
4680 && OBJECT_P (SUBREG_REG (XEXP (XEXP (x, 0), 0)))))
4681 return &XEXP (XEXP (x, 0), 0);
4686 /* If SET_DEST is CC0 and SET_SRC is not an operand, a COMPARE, or a
4687 ZERO_EXTRACT, the most likely reason why this doesn't match is that
4688 we need to put the operand into a register. So split at that
4691 if (SET_DEST (x) == cc0_rtx
4692 && GET_CODE (SET_SRC (x)) != COMPARE
4693 && GET_CODE (SET_SRC (x)) != ZERO_EXTRACT
4694 && !OBJECT_P (SET_SRC (x))
4695 && ! (GET_CODE (SET_SRC (x)) == SUBREG
4696 && OBJECT_P (SUBREG_REG (SET_SRC (x)))))
4697 return &SET_SRC (x);
4700 /* See if we can split SET_SRC as it stands. */
4701 split = find_split_point (&SET_SRC (x), insn, true);
4702 if (split && split != &SET_SRC (x))
4705 /* See if we can split SET_DEST as it stands. */
4706 split = find_split_point (&SET_DEST (x), insn, false);
4707 if (split && split != &SET_DEST (x))
4710 /* See if this is a bitfield assignment with everything constant. If
4711 so, this is an IOR of an AND, so split it into that. */
4712 if (GET_CODE (SET_DEST (x)) == ZERO_EXTRACT
4713 && HWI_COMPUTABLE_MODE_P (GET_MODE (XEXP (SET_DEST (x), 0)))
4714 && CONST_INT_P (XEXP (SET_DEST (x), 1))
4715 && CONST_INT_P (XEXP (SET_DEST (x), 2))
4716 && CONST_INT_P (SET_SRC (x))
4717 && ((INTVAL (XEXP (SET_DEST (x), 1))
4718 + INTVAL (XEXP (SET_DEST (x), 2)))
4719 <= GET_MODE_PRECISION (GET_MODE (XEXP (SET_DEST (x), 0))))
4720 && ! side_effects_p (XEXP (SET_DEST (x), 0)))
4722 HOST_WIDE_INT pos = INTVAL (XEXP (SET_DEST (x), 2));
4723 unsigned HOST_WIDE_INT len = INTVAL (XEXP (SET_DEST (x), 1));
4724 unsigned HOST_WIDE_INT src = INTVAL (SET_SRC (x));
4725 rtx dest = XEXP (SET_DEST (x), 0);
4726 enum machine_mode mode = GET_MODE (dest);
4727 unsigned HOST_WIDE_INT mask
4728 = ((unsigned HOST_WIDE_INT) 1 << len) - 1;
4731 if (BITS_BIG_ENDIAN)
4732 pos = GET_MODE_PRECISION (mode) - len - pos;
4734 or_mask = gen_int_mode (src << pos, mode);
4737 simplify_gen_binary (IOR, mode, dest, or_mask));
4740 rtx negmask = gen_int_mode (~(mask << pos), mode);
4742 simplify_gen_binary (IOR, mode,
4743 simplify_gen_binary (AND, mode,
4748 SUBST (SET_DEST (x), dest);
4750 split = find_split_point (&SET_SRC (x), insn, true);
4751 if (split && split != &SET_SRC (x))
4755 /* Otherwise, see if this is an operation that we can split into two.
4756 If so, try to split that. */
4757 code = GET_CODE (SET_SRC (x));
4762 /* If we are AND'ing with a large constant that is only a single
4763 bit and the result is only being used in a context where we
4764 need to know if it is zero or nonzero, replace it with a bit
4765 extraction. This will avoid the large constant, which might
4766 have taken more than one insn to make. If the constant were
4767 not a valid argument to the AND but took only one insn to make,
4768 this is no worse, but if it took more than one insn, it will
4771 if (CONST_INT_P (XEXP (SET_SRC (x), 1))
4772 && REG_P (XEXP (SET_SRC (x), 0))
4773 && (pos = exact_log2 (UINTVAL (XEXP (SET_SRC (x), 1)))) >= 7
4774 && REG_P (SET_DEST (x))
4775 && (split = find_single_use (SET_DEST (x), insn, (rtx*) 0)) != 0
4776 && (GET_CODE (*split) == EQ || GET_CODE (*split) == NE)
4777 && XEXP (*split, 0) == SET_DEST (x)
4778 && XEXP (*split, 1) == const0_rtx)
4780 rtx extraction = make_extraction (GET_MODE (SET_DEST (x)),
4781 XEXP (SET_SRC (x), 0),
4782 pos, NULL_RTX, 1, 1, 0, 0);
4783 if (extraction != 0)
4785 SUBST (SET_SRC (x), extraction);
4786 return find_split_point (loc, insn, false);
4792 /* If STORE_FLAG_VALUE is -1, this is (NE X 0) and only one bit of X
4793 is known to be on, this can be converted into a NEG of a shift. */
4794 if (STORE_FLAG_VALUE == -1 && XEXP (SET_SRC (x), 1) == const0_rtx
4795 && GET_MODE (SET_SRC (x)) == GET_MODE (XEXP (SET_SRC (x), 0))
4796 && 1 <= (pos = exact_log2
4797 (nonzero_bits (XEXP (SET_SRC (x), 0),
4798 GET_MODE (XEXP (SET_SRC (x), 0))))))
4800 enum machine_mode mode = GET_MODE (XEXP (SET_SRC (x), 0));
4804 gen_rtx_LSHIFTRT (mode,
4805 XEXP (SET_SRC (x), 0),
4808 split = find_split_point (&SET_SRC (x), insn, true);
4809 if (split && split != &SET_SRC (x))
4815 inner = XEXP (SET_SRC (x), 0);
4817 /* We can't optimize if either mode is a partial integer
4818 mode as we don't know how many bits are significant
4820 if (GET_MODE_CLASS (GET_MODE (inner)) == MODE_PARTIAL_INT
4821 || GET_MODE_CLASS (GET_MODE (SET_SRC (x))) == MODE_PARTIAL_INT)
4825 len = GET_MODE_PRECISION (GET_MODE (inner));
4831 if (CONST_INT_P (XEXP (SET_SRC (x), 1))
4832 && CONST_INT_P (XEXP (SET_SRC (x), 2)))
4834 inner = XEXP (SET_SRC (x), 0);
4835 len = INTVAL (XEXP (SET_SRC (x), 1));
4836 pos = INTVAL (XEXP (SET_SRC (x), 2));
4838 if (BITS_BIG_ENDIAN)
4839 pos = GET_MODE_PRECISION (GET_MODE (inner)) - len - pos;
4840 unsignedp = (code == ZERO_EXTRACT);
4849 && pos + len <= GET_MODE_PRECISION (GET_MODE (inner)))
4851 enum machine_mode mode = GET_MODE (SET_SRC (x));
4853 /* For unsigned, we have a choice of a shift followed by an
4854 AND or two shifts. Use two shifts for field sizes where the
4855 constant might be too large. We assume here that we can
4856 always at least get 8-bit constants in an AND insn, which is
4857 true for every current RISC. */
4859 if (unsignedp && len <= 8)
4864 (mode, gen_lowpart (mode, inner),
4866 GEN_INT (((unsigned HOST_WIDE_INT) 1 << len)
4869 split = find_split_point (&SET_SRC (x), insn, true);
4870 if (split && split != &SET_SRC (x))
4877 (unsignedp ? LSHIFTRT : ASHIFTRT, mode,
4878 gen_rtx_ASHIFT (mode,
4879 gen_lowpart (mode, inner),
4880 GEN_INT (GET_MODE_PRECISION (mode)
4882 GEN_INT (GET_MODE_PRECISION (mode) - len)));
4884 split = find_split_point (&SET_SRC (x), insn, true);
4885 if (split && split != &SET_SRC (x))
4890 /* See if this is a simple operation with a constant as the second
4891 operand. It might be that this constant is out of range and hence
4892 could be used as a split point. */
4893 if (BINARY_P (SET_SRC (x))
4894 && CONSTANT_P (XEXP (SET_SRC (x), 1))
4895 && (OBJECT_P (XEXP (SET_SRC (x), 0))
4896 || (GET_CODE (XEXP (SET_SRC (x), 0)) == SUBREG
4897 && OBJECT_P (SUBREG_REG (XEXP (SET_SRC (x), 0))))))
4898 return &XEXP (SET_SRC (x), 1);
4900 /* Finally, see if this is a simple operation with its first operand
4901 not in a register. The operation might require this operand in a
4902 register, so return it as a split point. We can always do this
4903 because if the first operand were another operation, we would have
4904 already found it as a split point. */
4905 if ((BINARY_P (SET_SRC (x)) || UNARY_P (SET_SRC (x)))
4906 && ! register_operand (XEXP (SET_SRC (x), 0), VOIDmode))
4907 return &XEXP (SET_SRC (x), 0);
4913 /* We write NOR as (and (not A) (not B)), but if we don't have a NOR,
4914 it is better to write this as (not (ior A B)) so we can split it.
4915 Similarly for IOR. */
4916 if (GET_CODE (XEXP (x, 0)) == NOT && GET_CODE (XEXP (x, 1)) == NOT)
4919 gen_rtx_NOT (GET_MODE (x),
4920 gen_rtx_fmt_ee (code == IOR ? AND : IOR,
4922 XEXP (XEXP (x, 0), 0),
4923 XEXP (XEXP (x, 1), 0))));
4924 return find_split_point (loc, insn, set_src);
4927 /* Many RISC machines have a large set of logical insns. If the
4928 second operand is a NOT, put it first so we will try to split the
4929 other operand first. */
4930 if (GET_CODE (XEXP (x, 1)) == NOT)
4932 rtx tem = XEXP (x, 0);
4933 SUBST (XEXP (x, 0), XEXP (x, 1));
4934 SUBST (XEXP (x, 1), tem);
4940 /* Canonicalization can produce (minus A (mult B C)), where C is a
4941 constant. It may be better to try splitting (plus (mult B -C) A)
4942 instead if this isn't a multiply by a power of two. */
4943 if (set_src && code == MINUS && GET_CODE (XEXP (x, 1)) == MULT
4944 && GET_CODE (XEXP (XEXP (x, 1), 1)) == CONST_INT
4945 && exact_log2 (INTVAL (XEXP (XEXP (x, 1), 1))) < 0)
4947 enum machine_mode mode = GET_MODE (x);
4948 unsigned HOST_WIDE_INT this_int = INTVAL (XEXP (XEXP (x, 1), 1));
4949 HOST_WIDE_INT other_int = trunc_int_for_mode (-this_int, mode);
4950 SUBST (*loc, gen_rtx_PLUS (mode, gen_rtx_MULT (mode,
4951 XEXP (XEXP (x, 1), 0),
4952 GEN_INT (other_int)),
4954 return find_split_point (loc, insn, set_src);
4957 /* Split at a multiply-accumulate instruction. However if this is
4958 the SET_SRC, we likely do not have such an instruction and it's
4959 worthless to try this split. */
4960 if (!set_src && GET_CODE (XEXP (x, 0)) == MULT)
4967 /* Otherwise, select our actions depending on our rtx class. */
4968 switch (GET_RTX_CLASS (code))
4970 case RTX_BITFIELD_OPS: /* This is ZERO_EXTRACT and SIGN_EXTRACT. */
4972 split = find_split_point (&XEXP (x, 2), insn, false);
4975 /* ... fall through ... */
4977 case RTX_COMM_ARITH:
4979 case RTX_COMM_COMPARE:
4980 split = find_split_point (&XEXP (x, 1), insn, false);
4983 /* ... fall through ... */
4985 /* Some machines have (and (shift ...) ...) insns. If X is not
4986 an AND, but XEXP (X, 0) is, use it as our split point. */
4987 if (GET_CODE (x) != AND && GET_CODE (XEXP (x, 0)) == AND)
4988 return &XEXP (x, 0);
4990 split = find_split_point (&XEXP (x, 0), insn, false);
4996 /* Otherwise, we don't have a split point. */
5001 /* Throughout X, replace FROM with TO, and return the result.
5002 The result is TO if X is FROM;
5003 otherwise the result is X, but its contents may have been modified.
5004 If they were modified, a record was made in undobuf so that
5005 undo_all will (among other things) return X to its original state.
5007 If the number of changes necessary is too much to record to undo,
5008 the excess changes are not made, so the result is invalid.
5009 The changes already made can still be undone.
5010 undobuf.num_undo is incremented for such changes, so by testing that
5011 the caller can tell whether the result is valid.
5013 `n_occurrences' is incremented each time FROM is replaced.
5015 IN_DEST is nonzero if we are processing the SET_DEST of a SET.
5017 IN_COND is nonzero if we are at the top level of a condition.
5019 UNIQUE_COPY is nonzero if each substitution must be unique. We do this
5020 by copying if `n_occurrences' is nonzero. */
5023 subst (rtx x, rtx from, rtx to, int in_dest, int in_cond, int unique_copy)
5025 enum rtx_code code = GET_CODE (x);
5026 enum machine_mode op0_mode = VOIDmode;
5031 /* Two expressions are equal if they are identical copies of a shared
5032 RTX or if they are both registers with the same register number
5035 #define COMBINE_RTX_EQUAL_P(X,Y) \
5037 || (REG_P (X) && REG_P (Y) \
5038 && REGNO (X) == REGNO (Y) && GET_MODE (X) == GET_MODE (Y)))
5040 if (! in_dest && COMBINE_RTX_EQUAL_P (x, from))
5043 return (unique_copy && n_occurrences > 1 ? copy_rtx (to) : to);
5046 /* If X and FROM are the same register but different modes, they
5047 will not have been seen as equal above. However, the log links code
5048 will make a LOG_LINKS entry for that case. If we do nothing, we
5049 will try to rerecognize our original insn and, when it succeeds,
5050 we will delete the feeding insn, which is incorrect.
5052 So force this insn not to match in this (rare) case. */
5053 if (! in_dest && code == REG && REG_P (from)
5054 && reg_overlap_mentioned_p (x, from))
5055 return gen_rtx_CLOBBER (GET_MODE (x), const0_rtx);
5057 /* If this is an object, we are done unless it is a MEM or LO_SUM, both
5058 of which may contain things that can be combined. */
5059 if (code != MEM && code != LO_SUM && OBJECT_P (x))
5062 /* It is possible to have a subexpression appear twice in the insn.
5063 Suppose that FROM is a register that appears within TO.
5064 Then, after that subexpression has been scanned once by `subst',
5065 the second time it is scanned, TO may be found. If we were
5066 to scan TO here, we would find FROM within it and create a
5067 self-referent rtl structure which is completely wrong. */
5068 if (COMBINE_RTX_EQUAL_P (x, to))
5071 /* Parallel asm_operands need special attention because all of the
5072 inputs are shared across the arms. Furthermore, unsharing the
5073 rtl results in recognition failures. Failure to handle this case
5074 specially can result in circular rtl.
5076 Solve this by doing a normal pass across the first entry of the
5077 parallel, and only processing the SET_DESTs of the subsequent
5080 if (code == PARALLEL
5081 && GET_CODE (XVECEXP (x, 0, 0)) == SET
5082 && GET_CODE (SET_SRC (XVECEXP (x, 0, 0))) == ASM_OPERANDS)
5084 new_rtx = subst (XVECEXP (x, 0, 0), from, to, 0, 0, unique_copy);
5086 /* If this substitution failed, this whole thing fails. */
5087 if (GET_CODE (new_rtx) == CLOBBER
5088 && XEXP (new_rtx, 0) == const0_rtx)
5091 SUBST (XVECEXP (x, 0, 0), new_rtx);
5093 for (i = XVECLEN (x, 0) - 1; i >= 1; i--)
5095 rtx dest = SET_DEST (XVECEXP (x, 0, i));
5098 && GET_CODE (dest) != CC0
5099 && GET_CODE (dest) != PC)
5101 new_rtx = subst (dest, from, to, 0, 0, unique_copy);
5103 /* If this substitution failed, this whole thing fails. */
5104 if (GET_CODE (new_rtx) == CLOBBER
5105 && XEXP (new_rtx, 0) == const0_rtx)
5108 SUBST (SET_DEST (XVECEXP (x, 0, i)), new_rtx);
5114 len = GET_RTX_LENGTH (code);
5115 fmt = GET_RTX_FORMAT (code);
5117 /* We don't need to process a SET_DEST that is a register, CC0,
5118 or PC, so set up to skip this common case. All other cases
5119 where we want to suppress replacing something inside a
5120 SET_SRC are handled via the IN_DEST operand. */
5122 && (REG_P (SET_DEST (x))
5123 || GET_CODE (SET_DEST (x)) == CC0
5124 || GET_CODE (SET_DEST (x)) == PC))
5127 /* Get the mode of operand 0 in case X is now a SIGN_EXTEND of a
5130 op0_mode = GET_MODE (XEXP (x, 0));
5132 for (i = 0; i < len; i++)
5137 for (j = XVECLEN (x, i) - 1; j >= 0; j--)
5139 if (COMBINE_RTX_EQUAL_P (XVECEXP (x, i, j), from))
5141 new_rtx = (unique_copy && n_occurrences
5142 ? copy_rtx (to) : to);
5147 new_rtx = subst (XVECEXP (x, i, j), from, to, 0, 0,
5150 /* If this substitution failed, this whole thing
5152 if (GET_CODE (new_rtx) == CLOBBER
5153 && XEXP (new_rtx, 0) == const0_rtx)
5157 SUBST (XVECEXP (x, i, j), new_rtx);
5160 else if (fmt[i] == 'e')
5162 /* If this is a register being set, ignore it. */
5163 new_rtx = XEXP (x, i);
5166 && (((code == SUBREG || code == ZERO_EXTRACT)
5168 || code == STRICT_LOW_PART))
5171 else if (COMBINE_RTX_EQUAL_P (XEXP (x, i), from))
5173 /* In general, don't install a subreg involving two
5174 modes not tieable. It can worsen register
5175 allocation, and can even make invalid reload
5176 insns, since the reg inside may need to be copied
5177 from in the outside mode, and that may be invalid
5178 if it is an fp reg copied in integer mode.
5180 We allow two exceptions to this: It is valid if
5181 it is inside another SUBREG and the mode of that
5182 SUBREG and the mode of the inside of TO is
5183 tieable and it is valid if X is a SET that copies
5186 if (GET_CODE (to) == SUBREG
5187 && ! MODES_TIEABLE_P (GET_MODE (to),
5188 GET_MODE (SUBREG_REG (to)))
5189 && ! (code == SUBREG
5190 && MODES_TIEABLE_P (GET_MODE (x),
5191 GET_MODE (SUBREG_REG (to))))
5193 && ! (code == SET && i == 1 && XEXP (x, 0) == cc0_rtx)
5196 return gen_rtx_CLOBBER (VOIDmode, const0_rtx);
5198 #ifdef CANNOT_CHANGE_MODE_CLASS
5201 && REGNO (to) < FIRST_PSEUDO_REGISTER
5202 && REG_CANNOT_CHANGE_MODE_P (REGNO (to),
5205 return gen_rtx_CLOBBER (VOIDmode, const0_rtx);
5208 new_rtx = (unique_copy && n_occurrences ? copy_rtx (to) : to);
5212 /* If we are in a SET_DEST, suppress most cases unless we
5213 have gone inside a MEM, in which case we want to
5214 simplify the address. We assume here that things that
5215 are actually part of the destination have their inner
5216 parts in the first expression. This is true for SUBREG,
5217 STRICT_LOW_PART, and ZERO_EXTRACT, which are the only
5218 things aside from REG and MEM that should appear in a
5220 new_rtx = subst (XEXP (x, i), from, to,
5222 && (code == SUBREG || code == STRICT_LOW_PART
5223 || code == ZERO_EXTRACT))
5226 code == IF_THEN_ELSE && i == 0,
5229 /* If we found that we will have to reject this combination,
5230 indicate that by returning the CLOBBER ourselves, rather than
5231 an expression containing it. This will speed things up as
5232 well as prevent accidents where two CLOBBERs are considered
5233 to be equal, thus producing an incorrect simplification. */
5235 if (GET_CODE (new_rtx) == CLOBBER && XEXP (new_rtx, 0) == const0_rtx)
5238 if (GET_CODE (x) == SUBREG
5239 && (CONST_INT_P (new_rtx)
5240 || GET_CODE (new_rtx) == CONST_DOUBLE))
5242 enum machine_mode mode = GET_MODE (x);
5244 x = simplify_subreg (GET_MODE (x), new_rtx,
5245 GET_MODE (SUBREG_REG (x)),
5248 x = gen_rtx_CLOBBER (mode, const0_rtx);
5250 else if (CONST_INT_P (new_rtx)
5251 && GET_CODE (x) == ZERO_EXTEND)
5253 x = simplify_unary_operation (ZERO_EXTEND, GET_MODE (x),
5254 new_rtx, GET_MODE (XEXP (x, 0)));
5258 SUBST (XEXP (x, i), new_rtx);
5263 /* Check if we are loading something from the constant pool via float
5264 extension; in this case we would undo compress_float_constant
5265 optimization and degenerate constant load to an immediate value. */
5266 if (GET_CODE (x) == FLOAT_EXTEND
5267 && MEM_P (XEXP (x, 0))
5268 && MEM_READONLY_P (XEXP (x, 0)))
5270 rtx tmp = avoid_constant_pool_reference (x);
5275 /* Try to simplify X. If the simplification changed the code, it is likely
5276 that further simplification will help, so loop, but limit the number
5277 of repetitions that will be performed. */
5279 for (i = 0; i < 4; i++)
5281 /* If X is sufficiently simple, don't bother trying to do anything
5283 if (code != CONST_INT && code != REG && code != CLOBBER)
5284 x = combine_simplify_rtx (x, op0_mode, in_dest, in_cond);
5286 if (GET_CODE (x) == code)
5289 code = GET_CODE (x);
5291 /* We no longer know the original mode of operand 0 since we
5292 have changed the form of X) */
5293 op0_mode = VOIDmode;
5299 /* Simplify X, a piece of RTL. We just operate on the expression at the
5300 outer level; call `subst' to simplify recursively. Return the new
5303 OP0_MODE is the original mode of XEXP (x, 0). IN_DEST is nonzero
5304 if we are inside a SET_DEST. IN_COND is nonzero if we are at the top level
5308 combine_simplify_rtx (rtx x, enum machine_mode op0_mode, int in_dest,
5311 enum rtx_code code = GET_CODE (x);
5312 enum machine_mode mode = GET_MODE (x);
5316 /* If this is a commutative operation, put a constant last and a complex
5317 expression first. We don't need to do this for comparisons here. */
5318 if (COMMUTATIVE_ARITH_P (x)
5319 && swap_commutative_operands_p (XEXP (x, 0), XEXP (x, 1)))
5322 SUBST (XEXP (x, 0), XEXP (x, 1));
5323 SUBST (XEXP (x, 1), temp);
5326 /* If this is a simple operation applied to an IF_THEN_ELSE, try
5327 applying it to the arms of the IF_THEN_ELSE. This often simplifies
5328 things. Check for cases where both arms are testing the same
5331 Don't do anything if all operands are very simple. */
5334 && ((!OBJECT_P (XEXP (x, 0))
5335 && ! (GET_CODE (XEXP (x, 0)) == SUBREG
5336 && OBJECT_P (SUBREG_REG (XEXP (x, 0)))))
5337 || (!OBJECT_P (XEXP (x, 1))
5338 && ! (GET_CODE (XEXP (x, 1)) == SUBREG
5339 && OBJECT_P (SUBREG_REG (XEXP (x, 1)))))))
5341 && (!OBJECT_P (XEXP (x, 0))
5342 && ! (GET_CODE (XEXP (x, 0)) == SUBREG
5343 && OBJECT_P (SUBREG_REG (XEXP (x, 0)))))))
5345 rtx cond, true_rtx, false_rtx;
5347 cond = if_then_else_cond (x, &true_rtx, &false_rtx);
5349 /* If everything is a comparison, what we have is highly unlikely
5350 to be simpler, so don't use it. */
5351 && ! (COMPARISON_P (x)
5352 && (COMPARISON_P (true_rtx) || COMPARISON_P (false_rtx))))
5354 rtx cop1 = const0_rtx;
5355 enum rtx_code cond_code = simplify_comparison (NE, &cond, &cop1);
5357 if (cond_code == NE && COMPARISON_P (cond))
5360 /* Simplify the alternative arms; this may collapse the true and
5361 false arms to store-flag values. Be careful to use copy_rtx
5362 here since true_rtx or false_rtx might share RTL with x as a
5363 result of the if_then_else_cond call above. */
5364 true_rtx = subst (copy_rtx (true_rtx), pc_rtx, pc_rtx, 0, 0, 0);
5365 false_rtx = subst (copy_rtx (false_rtx), pc_rtx, pc_rtx, 0, 0, 0);
5367 /* If true_rtx and false_rtx are not general_operands, an if_then_else
5368 is unlikely to be simpler. */
5369 if (general_operand (true_rtx, VOIDmode)
5370 && general_operand (false_rtx, VOIDmode))
5372 enum rtx_code reversed;
5374 /* Restarting if we generate a store-flag expression will cause
5375 us to loop. Just drop through in this case. */
5377 /* If the result values are STORE_FLAG_VALUE and zero, we can
5378 just make the comparison operation. */
5379 if (true_rtx == const_true_rtx && false_rtx == const0_rtx)
5380 x = simplify_gen_relational (cond_code, mode, VOIDmode,
5382 else if (true_rtx == const0_rtx && false_rtx == const_true_rtx
5383 && ((reversed = reversed_comparison_code_parts
5384 (cond_code, cond, cop1, NULL))
5386 x = simplify_gen_relational (reversed, mode, VOIDmode,
5389 /* Likewise, we can make the negate of a comparison operation
5390 if the result values are - STORE_FLAG_VALUE and zero. */
5391 else if (CONST_INT_P (true_rtx)
5392 && INTVAL (true_rtx) == - STORE_FLAG_VALUE
5393 && false_rtx == const0_rtx)
5394 x = simplify_gen_unary (NEG, mode,
5395 simplify_gen_relational (cond_code,
5399 else if (CONST_INT_P (false_rtx)
5400 && INTVAL (false_rtx) == - STORE_FLAG_VALUE
5401 && true_rtx == const0_rtx
5402 && ((reversed = reversed_comparison_code_parts
5403 (cond_code, cond, cop1, NULL))
5405 x = simplify_gen_unary (NEG, mode,
5406 simplify_gen_relational (reversed,
5411 return gen_rtx_IF_THEN_ELSE (mode,
5412 simplify_gen_relational (cond_code,
5417 true_rtx, false_rtx);
5419 code = GET_CODE (x);
5420 op0_mode = VOIDmode;
5425 /* Try to fold this expression in case we have constants that weren't
5428 switch (GET_RTX_CLASS (code))
5431 if (op0_mode == VOIDmode)
5432 op0_mode = GET_MODE (XEXP (x, 0));
5433 temp = simplify_unary_operation (code, mode, XEXP (x, 0), op0_mode);
5436 case RTX_COMM_COMPARE:
5438 enum machine_mode cmp_mode = GET_MODE (XEXP (x, 0));
5439 if (cmp_mode == VOIDmode)
5441 cmp_mode = GET_MODE (XEXP (x, 1));
5442 if (cmp_mode == VOIDmode)
5443 cmp_mode = op0_mode;
5445 temp = simplify_relational_operation (code, mode, cmp_mode,
5446 XEXP (x, 0), XEXP (x, 1));
5449 case RTX_COMM_ARITH:
5451 temp = simplify_binary_operation (code, mode, XEXP (x, 0), XEXP (x, 1));
5453 case RTX_BITFIELD_OPS:
5455 temp = simplify_ternary_operation (code, mode, op0_mode, XEXP (x, 0),
5456 XEXP (x, 1), XEXP (x, 2));
5465 code = GET_CODE (temp);
5466 op0_mode = VOIDmode;
5467 mode = GET_MODE (temp);
5470 /* First see if we can apply the inverse distributive law. */
5471 if (code == PLUS || code == MINUS
5472 || code == AND || code == IOR || code == XOR)
5474 x = apply_distributive_law (x);
5475 code = GET_CODE (x);
5476 op0_mode = VOIDmode;
5479 /* If CODE is an associative operation not otherwise handled, see if we
5480 can associate some operands. This can win if they are constants or
5481 if they are logically related (i.e. (a & b) & a). */
5482 if ((code == PLUS || code == MINUS || code == MULT || code == DIV
5483 || code == AND || code == IOR || code == XOR
5484 || code == SMAX || code == SMIN || code == UMAX || code == UMIN)
5485 && ((INTEGRAL_MODE_P (mode) && code != DIV)
5486 || (flag_associative_math && FLOAT_MODE_P (mode))))
5488 if (GET_CODE (XEXP (x, 0)) == code)
5490 rtx other = XEXP (XEXP (x, 0), 0);
5491 rtx inner_op0 = XEXP (XEXP (x, 0), 1);
5492 rtx inner_op1 = XEXP (x, 1);
5495 /* Make sure we pass the constant operand if any as the second
5496 one if this is a commutative operation. */
5497 if (CONSTANT_P (inner_op0) && COMMUTATIVE_ARITH_P (x))
5499 rtx tem = inner_op0;
5500 inner_op0 = inner_op1;
5503 inner = simplify_binary_operation (code == MINUS ? PLUS
5504 : code == DIV ? MULT
5506 mode, inner_op0, inner_op1);
5508 /* For commutative operations, try the other pair if that one
5510 if (inner == 0 && COMMUTATIVE_ARITH_P (x))
5512 other = XEXP (XEXP (x, 0), 1);
5513 inner = simplify_binary_operation (code, mode,
5514 XEXP (XEXP (x, 0), 0),
5519 return simplify_gen_binary (code, mode, other, inner);
5523 /* A little bit of algebraic simplification here. */
5527 /* Ensure that our address has any ASHIFTs converted to MULT in case
5528 address-recognizing predicates are called later. */
5529 temp = make_compound_operation (XEXP (x, 0), MEM);
5530 SUBST (XEXP (x, 0), temp);
5534 if (op0_mode == VOIDmode)
5535 op0_mode = GET_MODE (SUBREG_REG (x));
5537 /* See if this can be moved to simplify_subreg. */
5538 if (CONSTANT_P (SUBREG_REG (x))
5539 && subreg_lowpart_offset (mode, op0_mode) == SUBREG_BYTE (x)
5540 /* Don't call gen_lowpart if the inner mode
5541 is VOIDmode and we cannot simplify it, as SUBREG without
5542 inner mode is invalid. */
5543 && (GET_MODE (SUBREG_REG (x)) != VOIDmode
5544 || gen_lowpart_common (mode, SUBREG_REG (x))))
5545 return gen_lowpart (mode, SUBREG_REG (x));
5547 if (GET_MODE_CLASS (GET_MODE (SUBREG_REG (x))) == MODE_CC)
5551 temp = simplify_subreg (mode, SUBREG_REG (x), op0_mode,
5557 /* Don't change the mode of the MEM if that would change the meaning
5559 if (MEM_P (SUBREG_REG (x))
5560 && (MEM_VOLATILE_P (SUBREG_REG (x))
5561 || mode_dependent_address_p (XEXP (SUBREG_REG (x), 0))))
5562 return gen_rtx_CLOBBER (mode, const0_rtx);
5564 /* Note that we cannot do any narrowing for non-constants since
5565 we might have been counting on using the fact that some bits were
5566 zero. We now do this in the SET. */
5571 temp = expand_compound_operation (XEXP (x, 0));
5573 /* For C equal to the width of MODE minus 1, (neg (ashiftrt X C)) can be
5574 replaced by (lshiftrt X C). This will convert
5575 (neg (sign_extract X 1 Y)) to (zero_extract X 1 Y). */
5577 if (GET_CODE (temp) == ASHIFTRT
5578 && CONST_INT_P (XEXP (temp, 1))
5579 && INTVAL (XEXP (temp, 1)) == GET_MODE_PRECISION (mode) - 1)
5580 return simplify_shift_const (NULL_RTX, LSHIFTRT, mode, XEXP (temp, 0),
5581 INTVAL (XEXP (temp, 1)));
5583 /* If X has only a single bit that might be nonzero, say, bit I, convert
5584 (neg X) to (ashiftrt (ashift X C-I) C-I) where C is the bitsize of
5585 MODE minus 1. This will convert (neg (zero_extract X 1 Y)) to
5586 (sign_extract X 1 Y). But only do this if TEMP isn't a register
5587 or a SUBREG of one since we'd be making the expression more
5588 complex if it was just a register. */
5591 && ! (GET_CODE (temp) == SUBREG
5592 && REG_P (SUBREG_REG (temp)))
5593 && (i = exact_log2 (nonzero_bits (temp, mode))) >= 0)
5595 rtx temp1 = simplify_shift_const
5596 (NULL_RTX, ASHIFTRT, mode,
5597 simplify_shift_const (NULL_RTX, ASHIFT, mode, temp,
5598 GET_MODE_PRECISION (mode) - 1 - i),
5599 GET_MODE_PRECISION (mode) - 1 - i);
5601 /* If all we did was surround TEMP with the two shifts, we
5602 haven't improved anything, so don't use it. Otherwise,
5603 we are better off with TEMP1. */
5604 if (GET_CODE (temp1) != ASHIFTRT
5605 || GET_CODE (XEXP (temp1, 0)) != ASHIFT
5606 || XEXP (XEXP (temp1, 0), 0) != temp)
5612 /* We can't handle truncation to a partial integer mode here
5613 because we don't know the real bitsize of the partial
5615 if (GET_MODE_CLASS (mode) == MODE_PARTIAL_INT)
5618 if (HWI_COMPUTABLE_MODE_P (mode))
5620 force_to_mode (XEXP (x, 0), GET_MODE (XEXP (x, 0)),
5621 GET_MODE_MASK (mode), 0));
5623 /* We can truncate a constant value and return it. */
5624 if (CONST_INT_P (XEXP (x, 0)))
5625 return gen_int_mode (INTVAL (XEXP (x, 0)), mode);
5627 /* Similarly to what we do in simplify-rtx.c, a truncate of a register
5628 whose value is a comparison can be replaced with a subreg if
5629 STORE_FLAG_VALUE permits. */
5630 if (HWI_COMPUTABLE_MODE_P (mode)
5631 && (STORE_FLAG_VALUE & ~GET_MODE_MASK (mode)) == 0
5632 && (temp = get_last_value (XEXP (x, 0)))
5633 && COMPARISON_P (temp))
5634 return gen_lowpart (mode, XEXP (x, 0));
5638 /* (const (const X)) can become (const X). Do it this way rather than
5639 returning the inner CONST since CONST can be shared with a
5641 if (GET_CODE (XEXP (x, 0)) == CONST)
5642 SUBST (XEXP (x, 0), XEXP (XEXP (x, 0), 0));
5647 /* Convert (lo_sum (high FOO) FOO) to FOO. This is necessary so we
5648 can add in an offset. find_split_point will split this address up
5649 again if it doesn't match. */
5650 if (GET_CODE (XEXP (x, 0)) == HIGH
5651 && rtx_equal_p (XEXP (XEXP (x, 0), 0), XEXP (x, 1)))
5657 /* (plus (xor (and <foo> (const_int pow2 - 1)) <c>) <-c>)
5658 when c is (const_int (pow2 + 1) / 2) is a sign extension of a
5659 bit-field and can be replaced by either a sign_extend or a
5660 sign_extract. The `and' may be a zero_extend and the two
5661 <c>, -<c> constants may be reversed. */
5662 if (GET_CODE (XEXP (x, 0)) == XOR
5663 && CONST_INT_P (XEXP (x, 1))
5664 && CONST_INT_P (XEXP (XEXP (x, 0), 1))
5665 && INTVAL (XEXP (x, 1)) == -INTVAL (XEXP (XEXP (x, 0), 1))
5666 && ((i = exact_log2 (UINTVAL (XEXP (XEXP (x, 0), 1)))) >= 0
5667 || (i = exact_log2 (UINTVAL (XEXP (x, 1)))) >= 0)
5668 && HWI_COMPUTABLE_MODE_P (mode)
5669 && ((GET_CODE (XEXP (XEXP (x, 0), 0)) == AND
5670 && CONST_INT_P (XEXP (XEXP (XEXP (x, 0), 0), 1))
5671 && (UINTVAL (XEXP (XEXP (XEXP (x, 0), 0), 1))
5672 == ((unsigned HOST_WIDE_INT) 1 << (i + 1)) - 1))
5673 || (GET_CODE (XEXP (XEXP (x, 0), 0)) == ZERO_EXTEND
5674 && (GET_MODE_PRECISION (GET_MODE (XEXP (XEXP (XEXP (x, 0), 0), 0)))
5675 == (unsigned int) i + 1))))
5676 return simplify_shift_const
5677 (NULL_RTX, ASHIFTRT, mode,
5678 simplify_shift_const (NULL_RTX, ASHIFT, mode,
5679 XEXP (XEXP (XEXP (x, 0), 0), 0),
5680 GET_MODE_PRECISION (mode) - (i + 1)),
5681 GET_MODE_PRECISION (mode) - (i + 1));
5683 /* If only the low-order bit of X is possibly nonzero, (plus x -1)
5684 can become (ashiftrt (ashift (xor x 1) C) C) where C is
5685 the bitsize of the mode - 1. This allows simplification of
5686 "a = (b & 8) == 0;" */
5687 if (XEXP (x, 1) == constm1_rtx
5688 && !REG_P (XEXP (x, 0))
5689 && ! (GET_CODE (XEXP (x, 0)) == SUBREG
5690 && REG_P (SUBREG_REG (XEXP (x, 0))))
5691 && nonzero_bits (XEXP (x, 0), mode) == 1)
5692 return simplify_shift_const (NULL_RTX, ASHIFTRT, mode,
5693 simplify_shift_const (NULL_RTX, ASHIFT, mode,
5694 gen_rtx_XOR (mode, XEXP (x, 0), const1_rtx),
5695 GET_MODE_PRECISION (mode) - 1),
5696 GET_MODE_PRECISION (mode) - 1);
5698 /* If we are adding two things that have no bits in common, convert
5699 the addition into an IOR. This will often be further simplified,
5700 for example in cases like ((a & 1) + (a & 2)), which can
5703 if (HWI_COMPUTABLE_MODE_P (mode)
5704 && (nonzero_bits (XEXP (x, 0), mode)
5705 & nonzero_bits (XEXP (x, 1), mode)) == 0)
5707 /* Try to simplify the expression further. */
5708 rtx tor = simplify_gen_binary (IOR, mode, XEXP (x, 0), XEXP (x, 1));
5709 temp = combine_simplify_rtx (tor, VOIDmode, in_dest, 0);
5711 /* If we could, great. If not, do not go ahead with the IOR
5712 replacement, since PLUS appears in many special purpose
5713 address arithmetic instructions. */
5714 if (GET_CODE (temp) != CLOBBER
5715 && (GET_CODE (temp) != IOR
5716 || ((XEXP (temp, 0) != XEXP (x, 0)
5717 || XEXP (temp, 1) != XEXP (x, 1))
5718 && (XEXP (temp, 0) != XEXP (x, 1)
5719 || XEXP (temp, 1) != XEXP (x, 0)))))
5725 /* (minus <foo> (and <foo> (const_int -pow2))) becomes
5726 (and <foo> (const_int pow2-1)) */
5727 if (GET_CODE (XEXP (x, 1)) == AND
5728 && CONST_INT_P (XEXP (XEXP (x, 1), 1))
5729 && exact_log2 (-UINTVAL (XEXP (XEXP (x, 1), 1))) >= 0
5730 && rtx_equal_p (XEXP (XEXP (x, 1), 0), XEXP (x, 0)))
5731 return simplify_and_const_int (NULL_RTX, mode, XEXP (x, 0),
5732 -INTVAL (XEXP (XEXP (x, 1), 1)) - 1);
5736 /* If we have (mult (plus A B) C), apply the distributive law and then
5737 the inverse distributive law to see if things simplify. This
5738 occurs mostly in addresses, often when unrolling loops. */
5740 if (GET_CODE (XEXP (x, 0)) == PLUS)
5742 rtx result = distribute_and_simplify_rtx (x, 0);
5747 /* Try simplify a*(b/c) as (a*b)/c. */
5748 if (FLOAT_MODE_P (mode) && flag_associative_math
5749 && GET_CODE (XEXP (x, 0)) == DIV)
5751 rtx tem = simplify_binary_operation (MULT, mode,
5752 XEXP (XEXP (x, 0), 0),
5755 return simplify_gen_binary (DIV, mode, tem, XEXP (XEXP (x, 0), 1));
5760 /* If this is a divide by a power of two, treat it as a shift if
5761 its first operand is a shift. */
5762 if (CONST_INT_P (XEXP (x, 1))
5763 && (i = exact_log2 (UINTVAL (XEXP (x, 1)))) >= 0
5764 && (GET_CODE (XEXP (x, 0)) == ASHIFT
5765 || GET_CODE (XEXP (x, 0)) == LSHIFTRT
5766 || GET_CODE (XEXP (x, 0)) == ASHIFTRT
5767 || GET_CODE (XEXP (x, 0)) == ROTATE
5768 || GET_CODE (XEXP (x, 0)) == ROTATERT))
5769 return simplify_shift_const (NULL_RTX, LSHIFTRT, mode, XEXP (x, 0), i);
5773 case GT: case GTU: case GE: case GEU:
5774 case LT: case LTU: case LE: case LEU:
5775 case UNEQ: case LTGT:
5776 case UNGT: case UNGE:
5777 case UNLT: case UNLE:
5778 case UNORDERED: case ORDERED:
5779 /* If the first operand is a condition code, we can't do anything
5781 if (GET_CODE (XEXP (x, 0)) == COMPARE
5782 || (GET_MODE_CLASS (GET_MODE (XEXP (x, 0))) != MODE_CC
5783 && ! CC0_P (XEXP (x, 0))))
5785 rtx op0 = XEXP (x, 0);
5786 rtx op1 = XEXP (x, 1);
5787 enum rtx_code new_code;
5789 if (GET_CODE (op0) == COMPARE)
5790 op1 = XEXP (op0, 1), op0 = XEXP (op0, 0);
5792 /* Simplify our comparison, if possible. */
5793 new_code = simplify_comparison (code, &op0, &op1);
5795 /* If STORE_FLAG_VALUE is 1, we can convert (ne x 0) to simply X
5796 if only the low-order bit is possibly nonzero in X (such as when
5797 X is a ZERO_EXTRACT of one bit). Similarly, we can convert EQ to
5798 (xor X 1) or (minus 1 X); we use the former. Finally, if X is
5799 known to be either 0 or -1, NE becomes a NEG and EQ becomes
5802 Remove any ZERO_EXTRACT we made when thinking this was a
5803 comparison. It may now be simpler to use, e.g., an AND. If a
5804 ZERO_EXTRACT is indeed appropriate, it will be placed back by
5805 the call to make_compound_operation in the SET case.
5807 Don't apply these optimizations if the caller would
5808 prefer a comparison rather than a value.
5809 E.g., for the condition in an IF_THEN_ELSE most targets need
5810 an explicit comparison. */
5815 else if (STORE_FLAG_VALUE == 1
5816 && new_code == NE && GET_MODE_CLASS (mode) == MODE_INT
5817 && op1 == const0_rtx
5818 && mode == GET_MODE (op0)
5819 && nonzero_bits (op0, mode) == 1)
5820 return gen_lowpart (mode,
5821 expand_compound_operation (op0));
5823 else if (STORE_FLAG_VALUE == 1
5824 && new_code == NE && GET_MODE_CLASS (mode) == MODE_INT
5825 && op1 == const0_rtx
5826 && mode == GET_MODE (op0)
5827 && (num_sign_bit_copies (op0, mode)
5828 == GET_MODE_PRECISION (mode)))
5830 op0 = expand_compound_operation (op0);
5831 return simplify_gen_unary (NEG, mode,
5832 gen_lowpart (mode, op0),
5836 else if (STORE_FLAG_VALUE == 1
5837 && new_code == EQ && GET_MODE_CLASS (mode) == MODE_INT
5838 && op1 == const0_rtx
5839 && mode == GET_MODE (op0)
5840 && nonzero_bits (op0, mode) == 1)
5842 op0 = expand_compound_operation (op0);
5843 return simplify_gen_binary (XOR, mode,
5844 gen_lowpart (mode, op0),
5848 else if (STORE_FLAG_VALUE == 1
5849 && new_code == EQ && GET_MODE_CLASS (mode) == MODE_INT
5850 && op1 == const0_rtx
5851 && mode == GET_MODE (op0)
5852 && (num_sign_bit_copies (op0, mode)
5853 == GET_MODE_PRECISION (mode)))
5855 op0 = expand_compound_operation (op0);
5856 return plus_constant (gen_lowpart (mode, op0), 1);
5859 /* If STORE_FLAG_VALUE is -1, we have cases similar to
5864 else if (STORE_FLAG_VALUE == -1
5865 && new_code == NE && GET_MODE_CLASS (mode) == MODE_INT
5866 && op1 == const0_rtx
5867 && (num_sign_bit_copies (op0, mode)
5868 == GET_MODE_PRECISION (mode)))
5869 return gen_lowpart (mode,
5870 expand_compound_operation (op0));
5872 else if (STORE_FLAG_VALUE == -1
5873 && new_code == NE && GET_MODE_CLASS (mode) == MODE_INT
5874 && op1 == const0_rtx
5875 && mode == GET_MODE (op0)
5876 && nonzero_bits (op0, mode) == 1)
5878 op0 = expand_compound_operation (op0);
5879 return simplify_gen_unary (NEG, mode,
5880 gen_lowpart (mode, op0),
5884 else if (STORE_FLAG_VALUE == -1
5885 && new_code == EQ && GET_MODE_CLASS (mode) == MODE_INT
5886 && op1 == const0_rtx
5887 && mode == GET_MODE (op0)
5888 && (num_sign_bit_copies (op0, mode)
5889 == GET_MODE_PRECISION (mode)))
5891 op0 = expand_compound_operation (op0);
5892 return simplify_gen_unary (NOT, mode,
5893 gen_lowpart (mode, op0),
5897 /* If X is 0/1, (eq X 0) is X-1. */
5898 else if (STORE_FLAG_VALUE == -1
5899 && new_code == EQ && GET_MODE_CLASS (mode) == MODE_INT
5900 && op1 == const0_rtx
5901 && mode == GET_MODE (op0)
5902 && nonzero_bits (op0, mode) == 1)
5904 op0 = expand_compound_operation (op0);
5905 return plus_constant (gen_lowpart (mode, op0), -1);
5908 /* If STORE_FLAG_VALUE says to just test the sign bit and X has just
5909 one bit that might be nonzero, we can convert (ne x 0) to
5910 (ashift x c) where C puts the bit in the sign bit. Remove any
5911 AND with STORE_FLAG_VALUE when we are done, since we are only
5912 going to test the sign bit. */
5913 if (new_code == NE && GET_MODE_CLASS (mode) == MODE_INT
5914 && HWI_COMPUTABLE_MODE_P (mode)
5915 && val_signbit_p (mode, STORE_FLAG_VALUE)
5916 && op1 == const0_rtx
5917 && mode == GET_MODE (op0)
5918 && (i = exact_log2 (nonzero_bits (op0, mode))) >= 0)
5920 x = simplify_shift_const (NULL_RTX, ASHIFT, mode,
5921 expand_compound_operation (op0),
5922 GET_MODE_PRECISION (mode) - 1 - i);
5923 if (GET_CODE (x) == AND && XEXP (x, 1) == const_true_rtx)
5929 /* If the code changed, return a whole new comparison. */
5930 if (new_code != code)
5931 return gen_rtx_fmt_ee (new_code, mode, op0, op1);
5933 /* Otherwise, keep this operation, but maybe change its operands.
5934 This also converts (ne (compare FOO BAR) 0) to (ne FOO BAR). */
5935 SUBST (XEXP (x, 0), op0);
5936 SUBST (XEXP (x, 1), op1);
5941 return simplify_if_then_else (x);
5947 /* If we are processing SET_DEST, we are done. */
5951 return expand_compound_operation (x);
5954 return simplify_set (x);
5958 return simplify_logical (x);
5965 /* If this is a shift by a constant amount, simplify it. */
5966 if (CONST_INT_P (XEXP (x, 1)))
5967 return simplify_shift_const (x, code, mode, XEXP (x, 0),
5968 INTVAL (XEXP (x, 1)));
5970 else if (SHIFT_COUNT_TRUNCATED && !REG_P (XEXP (x, 1)))
5972 force_to_mode (XEXP (x, 1), GET_MODE (XEXP (x, 1)),
5973 ((unsigned HOST_WIDE_INT) 1
5974 << exact_log2 (GET_MODE_BITSIZE (GET_MODE (x))))
5986 /* Simplify X, an IF_THEN_ELSE expression. Return the new expression. */
5989 simplify_if_then_else (rtx x)
5991 enum machine_mode mode = GET_MODE (x);
5992 rtx cond = XEXP (x, 0);
5993 rtx true_rtx = XEXP (x, 1);
5994 rtx false_rtx = XEXP (x, 2);
5995 enum rtx_code true_code = GET_CODE (cond);
5996 int comparison_p = COMPARISON_P (cond);
5999 enum rtx_code false_code;
6002 /* Simplify storing of the truth value. */
6003 if (comparison_p && true_rtx == const_true_rtx && false_rtx == const0_rtx)
6004 return simplify_gen_relational (true_code, mode, VOIDmode,
6005 XEXP (cond, 0), XEXP (cond, 1));
6007 /* Also when the truth value has to be reversed. */
6009 && true_rtx == const0_rtx && false_rtx == const_true_rtx
6010 && (reversed = reversed_comparison (cond, mode)))
6013 /* Sometimes we can simplify the arm of an IF_THEN_ELSE if a register used
6014 in it is being compared against certain values. Get the true and false
6015 comparisons and see if that says anything about the value of each arm. */
6018 && ((false_code = reversed_comparison_code (cond, NULL))
6020 && REG_P (XEXP (cond, 0)))
6023 rtx from = XEXP (cond, 0);
6024 rtx true_val = XEXP (cond, 1);
6025 rtx false_val = true_val;
6028 /* If FALSE_CODE is EQ, swap the codes and arms. */
6030 if (false_code == EQ)
6032 swapped = 1, true_code = EQ, false_code = NE;
6033 temp = true_rtx, true_rtx = false_rtx, false_rtx = temp;
6036 /* If we are comparing against zero and the expression being tested has
6037 only a single bit that might be nonzero, that is its value when it is
6038 not equal to zero. Similarly if it is known to be -1 or 0. */
6040 if (true_code == EQ && true_val == const0_rtx
6041 && exact_log2 (nzb = nonzero_bits (from, GET_MODE (from))) >= 0)
6044 false_val = gen_int_mode (nzb, GET_MODE (from));
6046 else if (true_code == EQ && true_val == const0_rtx
6047 && (num_sign_bit_copies (from, GET_MODE (from))
6048 == GET_MODE_PRECISION (GET_MODE (from))))
6051 false_val = constm1_rtx;
6054 /* Now simplify an arm if we know the value of the register in the
6055 branch and it is used in the arm. Be careful due to the potential
6056 of locally-shared RTL. */
6058 if (reg_mentioned_p (from, true_rtx))
6059 true_rtx = subst (known_cond (copy_rtx (true_rtx), true_code,
6061 pc_rtx, pc_rtx, 0, 0, 0);
6062 if (reg_mentioned_p (from, false_rtx))
6063 false_rtx = subst (known_cond (copy_rtx (false_rtx), false_code,
6065 pc_rtx, pc_rtx, 0, 0, 0);
6067 SUBST (XEXP (x, 1), swapped ? false_rtx : true_rtx);
6068 SUBST (XEXP (x, 2), swapped ? true_rtx : false_rtx);
6070 true_rtx = XEXP (x, 1);
6071 false_rtx = XEXP (x, 2);
6072 true_code = GET_CODE (cond);
6075 /* If we have (if_then_else FOO (pc) (label_ref BAR)) and FOO can be
6076 reversed, do so to avoid needing two sets of patterns for
6077 subtract-and-branch insns. Similarly if we have a constant in the true
6078 arm, the false arm is the same as the first operand of the comparison, or
6079 the false arm is more complicated than the true arm. */
6082 && reversed_comparison_code (cond, NULL) != UNKNOWN
6083 && (true_rtx == pc_rtx
6084 || (CONSTANT_P (true_rtx)
6085 && !CONST_INT_P (false_rtx) && false_rtx != pc_rtx)
6086 || true_rtx == const0_rtx
6087 || (OBJECT_P (true_rtx) && !OBJECT_P (false_rtx))
6088 || (GET_CODE (true_rtx) == SUBREG && OBJECT_P (SUBREG_REG (true_rtx))
6089 && !OBJECT_P (false_rtx))
6090 || reg_mentioned_p (true_rtx, false_rtx)
6091 || rtx_equal_p (false_rtx, XEXP (cond, 0))))
6093 true_code = reversed_comparison_code (cond, NULL);
6094 SUBST (XEXP (x, 0), reversed_comparison (cond, GET_MODE (cond)));
6095 SUBST (XEXP (x, 1), false_rtx);
6096 SUBST (XEXP (x, 2), true_rtx);
6098 temp = true_rtx, true_rtx = false_rtx, false_rtx = temp;
6101 /* It is possible that the conditional has been simplified out. */
6102 true_code = GET_CODE (cond);
6103 comparison_p = COMPARISON_P (cond);
6106 /* If the two arms are identical, we don't need the comparison. */
6108 if (rtx_equal_p (true_rtx, false_rtx) && ! side_effects_p (cond))
6111 /* Convert a == b ? b : a to "a". */
6112 if (true_code == EQ && ! side_effects_p (cond)
6113 && !HONOR_NANS (mode)
6114 && rtx_equal_p (XEXP (cond, 0), false_rtx)
6115 && rtx_equal_p (XEXP (cond, 1), true_rtx))
6117 else if (true_code == NE && ! side_effects_p (cond)
6118 && !HONOR_NANS (mode)
6119 && rtx_equal_p (XEXP (cond, 0), true_rtx)
6120 && rtx_equal_p (XEXP (cond, 1), false_rtx))
6123 /* Look for cases where we have (abs x) or (neg (abs X)). */
6125 if (GET_MODE_CLASS (mode) == MODE_INT
6127 && XEXP (cond, 1) == const0_rtx
6128 && GET_CODE (false_rtx) == NEG
6129 && rtx_equal_p (true_rtx, XEXP (false_rtx, 0))
6130 && rtx_equal_p (true_rtx, XEXP (cond, 0))
6131 && ! side_effects_p (true_rtx))
6136 return simplify_gen_unary (ABS, mode, true_rtx, mode);
6140 simplify_gen_unary (NEG, mode,
6141 simplify_gen_unary (ABS, mode, true_rtx, mode),
6147 /* Look for MIN or MAX. */
6149 if ((! FLOAT_MODE_P (mode) || flag_unsafe_math_optimizations)
6151 && rtx_equal_p (XEXP (cond, 0), true_rtx)
6152 && rtx_equal_p (XEXP (cond, 1), false_rtx)
6153 && ! side_effects_p (cond))
6158 return simplify_gen_binary (SMAX, mode, true_rtx, false_rtx);
6161 return simplify_gen_binary (SMIN, mode, true_rtx, false_rtx);
6164 return simplify_gen_binary (UMAX, mode, true_rtx, false_rtx);
6167 return simplify_gen_binary (UMIN, mode, true_rtx, false_rtx);
6172 /* If we have (if_then_else COND (OP Z C1) Z) and OP is an identity when its
6173 second operand is zero, this can be done as (OP Z (mult COND C2)) where
6174 C2 = C1 * STORE_FLAG_VALUE. Similarly if OP has an outer ZERO_EXTEND or
6175 SIGN_EXTEND as long as Z is already extended (so we don't destroy it).
6176 We can do this kind of thing in some cases when STORE_FLAG_VALUE is
6177 neither 1 or -1, but it isn't worth checking for. */
6179 if ((STORE_FLAG_VALUE == 1 || STORE_FLAG_VALUE == -1)
6181 && GET_MODE_CLASS (mode) == MODE_INT
6182 && ! side_effects_p (x))
6184 rtx t = make_compound_operation (true_rtx, SET);
6185 rtx f = make_compound_operation (false_rtx, SET);
6186 rtx cond_op0 = XEXP (cond, 0);
6187 rtx cond_op1 = XEXP (cond, 1);
6188 enum rtx_code op = UNKNOWN, extend_op = UNKNOWN;
6189 enum machine_mode m = mode;
6190 rtx z = 0, c1 = NULL_RTX;
6192 if ((GET_CODE (t) == PLUS || GET_CODE (t) == MINUS
6193 || GET_CODE (t) == IOR || GET_CODE (t) == XOR
6194 || GET_CODE (t) == ASHIFT
6195 || GET_CODE (t) == LSHIFTRT || GET_CODE (t) == ASHIFTRT)
6196 && rtx_equal_p (XEXP (t, 0), f))
6197 c1 = XEXP (t, 1), op = GET_CODE (t), z = f;
6199 /* If an identity-zero op is commutative, check whether there
6200 would be a match if we swapped the operands. */
6201 else if ((GET_CODE (t) == PLUS || GET_CODE (t) == IOR
6202 || GET_CODE (t) == XOR)
6203 && rtx_equal_p (XEXP (t, 1), f))
6204 c1 = XEXP (t, 0), op = GET_CODE (t), z = f;
6205 else if (GET_CODE (t) == SIGN_EXTEND
6206 && (GET_CODE (XEXP (t, 0)) == PLUS
6207 || GET_CODE (XEXP (t, 0)) == MINUS
6208 || GET_CODE (XEXP (t, 0)) == IOR
6209 || GET_CODE (XEXP (t, 0)) == XOR
6210 || GET_CODE (XEXP (t, 0)) == ASHIFT
6211 || GET_CODE (XEXP (t, 0)) == LSHIFTRT
6212 || GET_CODE (XEXP (t, 0)) == ASHIFTRT)
6213 && GET_CODE (XEXP (XEXP (t, 0), 0)) == SUBREG
6214 && subreg_lowpart_p (XEXP (XEXP (t, 0), 0))
6215 && rtx_equal_p (SUBREG_REG (XEXP (XEXP (t, 0), 0)), f)
6216 && (num_sign_bit_copies (f, GET_MODE (f))
6218 (GET_MODE_PRECISION (mode)
6219 - GET_MODE_PRECISION (GET_MODE (XEXP (XEXP (t, 0), 0))))))
6221 c1 = XEXP (XEXP (t, 0), 1); z = f; op = GET_CODE (XEXP (t, 0));
6222 extend_op = SIGN_EXTEND;
6223 m = GET_MODE (XEXP (t, 0));
6225 else if (GET_CODE (t) == SIGN_EXTEND
6226 && (GET_CODE (XEXP (t, 0)) == PLUS
6227 || GET_CODE (XEXP (t, 0)) == IOR
6228 || GET_CODE (XEXP (t, 0)) == XOR)
6229 && GET_CODE (XEXP (XEXP (t, 0), 1)) == SUBREG
6230 && subreg_lowpart_p (XEXP (XEXP (t, 0), 1))
6231 && rtx_equal_p (SUBREG_REG (XEXP (XEXP (t, 0), 1)), f)
6232 && (num_sign_bit_copies (f, GET_MODE (f))
6234 (GET_MODE_PRECISION (mode)
6235 - GET_MODE_PRECISION (GET_MODE (XEXP (XEXP (t, 0), 1))))))
6237 c1 = XEXP (XEXP (t, 0), 0); z = f; op = GET_CODE (XEXP (t, 0));
6238 extend_op = SIGN_EXTEND;
6239 m = GET_MODE (XEXP (t, 0));
6241 else if (GET_CODE (t) == ZERO_EXTEND
6242 && (GET_CODE (XEXP (t, 0)) == PLUS
6243 || GET_CODE (XEXP (t, 0)) == MINUS
6244 || GET_CODE (XEXP (t, 0)) == IOR
6245 || GET_CODE (XEXP (t, 0)) == XOR
6246 || GET_CODE (XEXP (t, 0)) == ASHIFT
6247 || GET_CODE (XEXP (t, 0)) == LSHIFTRT
6248 || GET_CODE (XEXP (t, 0)) == ASHIFTRT)
6249 && GET_CODE (XEXP (XEXP (t, 0), 0)) == SUBREG
6250 && HWI_COMPUTABLE_MODE_P (mode)
6251 && subreg_lowpart_p (XEXP (XEXP (t, 0), 0))
6252 && rtx_equal_p (SUBREG_REG (XEXP (XEXP (t, 0), 0)), f)
6253 && ((nonzero_bits (f, GET_MODE (f))
6254 & ~GET_MODE_MASK (GET_MODE (XEXP (XEXP (t, 0), 0))))
6257 c1 = XEXP (XEXP (t, 0), 1); z = f; op = GET_CODE (XEXP (t, 0));
6258 extend_op = ZERO_EXTEND;
6259 m = GET_MODE (XEXP (t, 0));
6261 else if (GET_CODE (t) == ZERO_EXTEND
6262 && (GET_CODE (XEXP (t, 0)) == PLUS
6263 || GET_CODE (XEXP (t, 0)) == IOR
6264 || GET_CODE (XEXP (t, 0)) == XOR)
6265 && GET_CODE (XEXP (XEXP (t, 0), 1)) == SUBREG
6266 && HWI_COMPUTABLE_MODE_P (mode)
6267 && subreg_lowpart_p (XEXP (XEXP (t, 0), 1))
6268 && rtx_equal_p (SUBREG_REG (XEXP (XEXP (t, 0), 1)), f)
6269 && ((nonzero_bits (f, GET_MODE (f))
6270 & ~GET_MODE_MASK (GET_MODE (XEXP (XEXP (t, 0), 1))))
6273 c1 = XEXP (XEXP (t, 0), 0); z = f; op = GET_CODE (XEXP (t, 0));
6274 extend_op = ZERO_EXTEND;
6275 m = GET_MODE (XEXP (t, 0));
6280 temp = subst (simplify_gen_relational (true_code, m, VOIDmode,
6281 cond_op0, cond_op1),
6282 pc_rtx, pc_rtx, 0, 0, 0);
6283 temp = simplify_gen_binary (MULT, m, temp,
6284 simplify_gen_binary (MULT, m, c1,
6286 temp = subst (temp, pc_rtx, pc_rtx, 0, 0, 0);
6287 temp = simplify_gen_binary (op, m, gen_lowpart (m, z), temp);
6289 if (extend_op != UNKNOWN)
6290 temp = simplify_gen_unary (extend_op, mode, temp, m);
6296 /* If we have (if_then_else (ne A 0) C1 0) and either A is known to be 0 or
6297 1 and C1 is a single bit or A is known to be 0 or -1 and C1 is the
6298 negation of a single bit, we can convert this operation to a shift. We
6299 can actually do this more generally, but it doesn't seem worth it. */
6301 if (true_code == NE && XEXP (cond, 1) == const0_rtx
6302 && false_rtx == const0_rtx && CONST_INT_P (true_rtx)
6303 && ((1 == nonzero_bits (XEXP (cond, 0), mode)
6304 && (i = exact_log2 (UINTVAL (true_rtx))) >= 0)
6305 || ((num_sign_bit_copies (XEXP (cond, 0), mode)
6306 == GET_MODE_PRECISION (mode))
6307 && (i = exact_log2 (-UINTVAL (true_rtx))) >= 0)))
6309 simplify_shift_const (NULL_RTX, ASHIFT, mode,
6310 gen_lowpart (mode, XEXP (cond, 0)), i);
6312 /* (IF_THEN_ELSE (NE REG 0) (0) (8)) is REG for nonzero_bits (REG) == 8. */
6313 if (true_code == NE && XEXP (cond, 1) == const0_rtx
6314 && false_rtx == const0_rtx && CONST_INT_P (true_rtx)
6315 && GET_MODE (XEXP (cond, 0)) == mode
6316 && (UINTVAL (true_rtx) & GET_MODE_MASK (mode))
6317 == nonzero_bits (XEXP (cond, 0), mode)
6318 && (i = exact_log2 (UINTVAL (true_rtx) & GET_MODE_MASK (mode))) >= 0)
6319 return XEXP (cond, 0);
6324 /* Simplify X, a SET expression. Return the new expression. */
6327 simplify_set (rtx x)
6329 rtx src = SET_SRC (x);
6330 rtx dest = SET_DEST (x);
6331 enum machine_mode mode
6332 = GET_MODE (src) != VOIDmode ? GET_MODE (src) : GET_MODE (dest);
6336 /* (set (pc) (return)) gets written as (return). */
6337 if (GET_CODE (dest) == PC && ANY_RETURN_P (src))
6340 /* Now that we know for sure which bits of SRC we are using, see if we can
6341 simplify the expression for the object knowing that we only need the
6344 if (GET_MODE_CLASS (mode) == MODE_INT && HWI_COMPUTABLE_MODE_P (mode))
6346 src = force_to_mode (src, mode, ~(unsigned HOST_WIDE_INT) 0, 0);
6347 SUBST (SET_SRC (x), src);
6350 /* If we are setting CC0 or if the source is a COMPARE, look for the use of
6351 the comparison result and try to simplify it unless we already have used
6352 undobuf.other_insn. */
6353 if ((GET_MODE_CLASS (mode) == MODE_CC
6354 || GET_CODE (src) == COMPARE
6356 && (cc_use = find_single_use (dest, subst_insn, &other_insn)) != 0
6357 && (undobuf.other_insn == 0 || other_insn == undobuf.other_insn)
6358 && COMPARISON_P (*cc_use)
6359 && rtx_equal_p (XEXP (*cc_use, 0), dest))
6361 enum rtx_code old_code = GET_CODE (*cc_use);
6362 enum rtx_code new_code;
6364 int other_changed = 0;
6365 rtx inner_compare = NULL_RTX;
6366 enum machine_mode compare_mode = GET_MODE (dest);
6368 if (GET_CODE (src) == COMPARE)
6370 op0 = XEXP (src, 0), op1 = XEXP (src, 1);
6371 if (GET_CODE (op0) == COMPARE && op1 == const0_rtx)
6373 inner_compare = op0;
6374 op0 = XEXP (inner_compare, 0), op1 = XEXP (inner_compare, 1);
6378 op0 = src, op1 = CONST0_RTX (GET_MODE (src));
6380 tmp = simplify_relational_operation (old_code, compare_mode, VOIDmode,
6383 new_code = old_code;
6384 else if (!CONSTANT_P (tmp))
6386 new_code = GET_CODE (tmp);
6387 op0 = XEXP (tmp, 0);
6388 op1 = XEXP (tmp, 1);
6392 rtx pat = PATTERN (other_insn);
6393 undobuf.other_insn = other_insn;
6394 SUBST (*cc_use, tmp);
6396 /* Attempt to simplify CC user. */
6397 if (GET_CODE (pat) == SET)
6399 rtx new_rtx = simplify_rtx (SET_SRC (pat));
6400 if (new_rtx != NULL_RTX)
6401 SUBST (SET_SRC (pat), new_rtx);
6404 /* Convert X into a no-op move. */
6405 SUBST (SET_DEST (x), pc_rtx);
6406 SUBST (SET_SRC (x), pc_rtx);
6410 /* Simplify our comparison, if possible. */
6411 new_code = simplify_comparison (new_code, &op0, &op1);
6413 #ifdef SELECT_CC_MODE
6414 /* If this machine has CC modes other than CCmode, check to see if we
6415 need to use a different CC mode here. */
6416 if (GET_MODE_CLASS (GET_MODE (op0)) == MODE_CC)
6417 compare_mode = GET_MODE (op0);
6418 else if (inner_compare
6419 && GET_MODE_CLASS (GET_MODE (inner_compare)) == MODE_CC
6420 && new_code == old_code
6421 && op0 == XEXP (inner_compare, 0)
6422 && op1 == XEXP (inner_compare, 1))
6423 compare_mode = GET_MODE (inner_compare);
6425 compare_mode = SELECT_CC_MODE (new_code, op0, op1);
6428 /* If the mode changed, we have to change SET_DEST, the mode in the
6429 compare, and the mode in the place SET_DEST is used. If SET_DEST is
6430 a hard register, just build new versions with the proper mode. If it
6431 is a pseudo, we lose unless it is only time we set the pseudo, in
6432 which case we can safely change its mode. */
6433 if (compare_mode != GET_MODE (dest))
6435 if (can_change_dest_mode (dest, 0, compare_mode))
6437 unsigned int regno = REGNO (dest);
6440 if (regno < FIRST_PSEUDO_REGISTER)
6441 new_dest = gen_rtx_REG (compare_mode, regno);
6444 SUBST_MODE (regno_reg_rtx[regno], compare_mode);
6445 new_dest = regno_reg_rtx[regno];
6448 SUBST (SET_DEST (x), new_dest);
6449 SUBST (XEXP (*cc_use, 0), new_dest);
6456 #endif /* SELECT_CC_MODE */
6458 /* If the code changed, we have to build a new comparison in
6459 undobuf.other_insn. */
6460 if (new_code != old_code)
6462 int other_changed_previously = other_changed;
6463 unsigned HOST_WIDE_INT mask;
6464 rtx old_cc_use = *cc_use;
6466 SUBST (*cc_use, gen_rtx_fmt_ee (new_code, GET_MODE (*cc_use),
6470 /* If the only change we made was to change an EQ into an NE or
6471 vice versa, OP0 has only one bit that might be nonzero, and OP1
6472 is zero, check if changing the user of the condition code will
6473 produce a valid insn. If it won't, we can keep the original code
6474 in that insn by surrounding our operation with an XOR. */
6476 if (((old_code == NE && new_code == EQ)
6477 || (old_code == EQ && new_code == NE))
6478 && ! other_changed_previously && op1 == const0_rtx
6479 && HWI_COMPUTABLE_MODE_P (GET_MODE (op0))
6480 && exact_log2 (mask = nonzero_bits (op0, GET_MODE (op0))) >= 0)
6482 rtx pat = PATTERN (other_insn), note = 0;
6484 if ((recog_for_combine (&pat, other_insn, ¬e) < 0
6485 && ! check_asm_operands (pat)))
6487 *cc_use = old_cc_use;
6490 op0 = simplify_gen_binary (XOR, GET_MODE (op0),
6491 op0, GEN_INT (mask));
6497 undobuf.other_insn = other_insn;
6499 /* Otherwise, if we didn't previously have a COMPARE in the
6500 correct mode, we need one. */
6501 if (GET_CODE (src) != COMPARE || GET_MODE (src) != compare_mode)
6503 SUBST (SET_SRC (x), gen_rtx_COMPARE (compare_mode, op0, op1));
6506 else if (GET_MODE (op0) == compare_mode && op1 == const0_rtx)
6508 SUBST (SET_SRC (x), op0);
6511 /* Otherwise, update the COMPARE if needed. */
6512 else if (XEXP (src, 0) != op0 || XEXP (src, 1) != op1)
6514 SUBST (SET_SRC (x), gen_rtx_COMPARE (compare_mode, op0, op1));
6520 /* Get SET_SRC in a form where we have placed back any
6521 compound expressions. Then do the checks below. */
6522 src = make_compound_operation (src, SET);
6523 SUBST (SET_SRC (x), src);
6526 /* If we have (set x (subreg:m1 (op:m2 ...) 0)) with OP being some operation,
6527 and X being a REG or (subreg (reg)), we may be able to convert this to
6528 (set (subreg:m2 x) (op)).
6530 We can always do this if M1 is narrower than M2 because that means that
6531 we only care about the low bits of the result.
6533 However, on machines without WORD_REGISTER_OPERATIONS defined, we cannot
6534 perform a narrower operation than requested since the high-order bits will
6535 be undefined. On machine where it is defined, this transformation is safe
6536 as long as M1 and M2 have the same number of words. */
6538 if (GET_CODE (src) == SUBREG && subreg_lowpart_p (src)
6539 && !OBJECT_P (SUBREG_REG (src))
6540 && (((GET_MODE_SIZE (GET_MODE (src)) + (UNITS_PER_WORD - 1))
6542 == ((GET_MODE_SIZE (GET_MODE (SUBREG_REG (src)))
6543 + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD))
6544 #ifndef WORD_REGISTER_OPERATIONS
6545 && (GET_MODE_SIZE (GET_MODE (src))
6546 < GET_MODE_SIZE (GET_MODE (SUBREG_REG (src))))
6548 #ifdef CANNOT_CHANGE_MODE_CLASS
6549 && ! (REG_P (dest) && REGNO (dest) < FIRST_PSEUDO_REGISTER
6550 && REG_CANNOT_CHANGE_MODE_P (REGNO (dest),
6551 GET_MODE (SUBREG_REG (src)),
6555 || (GET_CODE (dest) == SUBREG
6556 && REG_P (SUBREG_REG (dest)))))
6558 SUBST (SET_DEST (x),
6559 gen_lowpart (GET_MODE (SUBREG_REG (src)),
6561 SUBST (SET_SRC (x), SUBREG_REG (src));
6563 src = SET_SRC (x), dest = SET_DEST (x);
6567 /* If we have (set (cc0) (subreg ...)), we try to remove the subreg
6570 && GET_CODE (src) == SUBREG
6571 && subreg_lowpart_p (src)
6572 && (GET_MODE_PRECISION (GET_MODE (src))
6573 < GET_MODE_PRECISION (GET_MODE (SUBREG_REG (src)))))
6575 rtx inner = SUBREG_REG (src);
6576 enum machine_mode inner_mode = GET_MODE (inner);
6578 /* Here we make sure that we don't have a sign bit on. */
6579 if (val_signbit_known_clear_p (GET_MODE (src),
6580 nonzero_bits (inner, inner_mode)))
6582 SUBST (SET_SRC (x), inner);
6588 #ifdef LOAD_EXTEND_OP
6589 /* If we have (set FOO (subreg:M (mem:N BAR) 0)) with M wider than N, this
6590 would require a paradoxical subreg. Replace the subreg with a
6591 zero_extend to avoid the reload that would otherwise be required. */
6593 if (GET_CODE (src) == SUBREG && subreg_lowpart_p (src)
6594 && INTEGRAL_MODE_P (GET_MODE (SUBREG_REG (src)))
6595 && LOAD_EXTEND_OP (GET_MODE (SUBREG_REG (src))) != UNKNOWN
6596 && SUBREG_BYTE (src) == 0
6597 && paradoxical_subreg_p (src)
6598 && MEM_P (SUBREG_REG (src)))
6601 gen_rtx_fmt_e (LOAD_EXTEND_OP (GET_MODE (SUBREG_REG (src))),
6602 GET_MODE (src), SUBREG_REG (src)));
6608 /* If we don't have a conditional move, SET_SRC is an IF_THEN_ELSE, and we
6609 are comparing an item known to be 0 or -1 against 0, use a logical
6610 operation instead. Check for one of the arms being an IOR of the other
6611 arm with some value. We compute three terms to be IOR'ed together. In
6612 practice, at most two will be nonzero. Then we do the IOR's. */
6614 if (GET_CODE (dest) != PC
6615 && GET_CODE (src) == IF_THEN_ELSE
6616 && GET_MODE_CLASS (GET_MODE (src)) == MODE_INT
6617 && (GET_CODE (XEXP (src, 0)) == EQ || GET_CODE (XEXP (src, 0)) == NE)
6618 && XEXP (XEXP (src, 0), 1) == const0_rtx
6619 && GET_MODE (src) == GET_MODE (XEXP (XEXP (src, 0), 0))
6620 #ifdef HAVE_conditional_move
6621 && ! can_conditionally_move_p (GET_MODE (src))
6623 && (num_sign_bit_copies (XEXP (XEXP (src, 0), 0),
6624 GET_MODE (XEXP (XEXP (src, 0), 0)))
6625 == GET_MODE_PRECISION (GET_MODE (XEXP (XEXP (src, 0), 0))))
6626 && ! side_effects_p (src))
6628 rtx true_rtx = (GET_CODE (XEXP (src, 0)) == NE
6629 ? XEXP (src, 1) : XEXP (src, 2));
6630 rtx false_rtx = (GET_CODE (XEXP (src, 0)) == NE
6631 ? XEXP (src, 2) : XEXP (src, 1));
6632 rtx term1 = const0_rtx, term2, term3;
6634 if (GET_CODE (true_rtx) == IOR
6635 && rtx_equal_p (XEXP (true_rtx, 0), false_rtx))
6636 term1 = false_rtx, true_rtx = XEXP (true_rtx, 1), false_rtx = const0_rtx;
6637 else if (GET_CODE (true_rtx) == IOR
6638 && rtx_equal_p (XEXP (true_rtx, 1), false_rtx))
6639 term1 = false_rtx, true_rtx = XEXP (true_rtx, 0), false_rtx = const0_rtx;
6640 else if (GET_CODE (false_rtx) == IOR
6641 && rtx_equal_p (XEXP (false_rtx, 0), true_rtx))
6642 term1 = true_rtx, false_rtx = XEXP (false_rtx, 1), true_rtx = const0_rtx;
6643 else if (GET_CODE (false_rtx) == IOR
6644 && rtx_equal_p (XEXP (false_rtx, 1), true_rtx))
6645 term1 = true_rtx, false_rtx = XEXP (false_rtx, 0), true_rtx = const0_rtx;
6647 term2 = simplify_gen_binary (AND, GET_MODE (src),
6648 XEXP (XEXP (src, 0), 0), true_rtx);
6649 term3 = simplify_gen_binary (AND, GET_MODE (src),
6650 simplify_gen_unary (NOT, GET_MODE (src),
6651 XEXP (XEXP (src, 0), 0),
6656 simplify_gen_binary (IOR, GET_MODE (src),
6657 simplify_gen_binary (IOR, GET_MODE (src),
6664 /* If either SRC or DEST is a CLOBBER of (const_int 0), make this
6665 whole thing fail. */
6666 if (GET_CODE (src) == CLOBBER && XEXP (src, 0) == const0_rtx)
6668 else if (GET_CODE (dest) == CLOBBER && XEXP (dest, 0) == const0_rtx)
6671 /* Convert this into a field assignment operation, if possible. */
6672 return make_field_assignment (x);
6675 /* Simplify, X, and AND, IOR, or XOR operation, and return the simplified
6679 simplify_logical (rtx x)
6681 enum machine_mode mode = GET_MODE (x);
6682 rtx op0 = XEXP (x, 0);
6683 rtx op1 = XEXP (x, 1);
6685 switch (GET_CODE (x))
6688 /* We can call simplify_and_const_int only if we don't lose
6689 any (sign) bits when converting INTVAL (op1) to
6690 "unsigned HOST_WIDE_INT". */
6691 if (CONST_INT_P (op1)
6692 && (HWI_COMPUTABLE_MODE_P (mode)
6693 || INTVAL (op1) > 0))
6695 x = simplify_and_const_int (x, mode, op0, INTVAL (op1));
6696 if (GET_CODE (x) != AND)
6703 /* If we have any of (and (ior A B) C) or (and (xor A B) C),
6704 apply the distributive law and then the inverse distributive
6705 law to see if things simplify. */
6706 if (GET_CODE (op0) == IOR || GET_CODE (op0) == XOR)
6708 rtx result = distribute_and_simplify_rtx (x, 0);
6712 if (GET_CODE (op1) == IOR || GET_CODE (op1) == XOR)
6714 rtx result = distribute_and_simplify_rtx (x, 1);
6721 /* If we have (ior (and A B) C), apply the distributive law and then
6722 the inverse distributive law to see if things simplify. */
6724 if (GET_CODE (op0) == AND)
6726 rtx result = distribute_and_simplify_rtx (x, 0);
6731 if (GET_CODE (op1) == AND)
6733 rtx result = distribute_and_simplify_rtx (x, 1);
6746 /* We consider ZERO_EXTRACT, SIGN_EXTRACT, and SIGN_EXTEND as "compound
6747 operations" because they can be replaced with two more basic operations.
6748 ZERO_EXTEND is also considered "compound" because it can be replaced with
6749 an AND operation, which is simpler, though only one operation.
6751 The function expand_compound_operation is called with an rtx expression
6752 and will convert it to the appropriate shifts and AND operations,
6753 simplifying at each stage.
6755 The function make_compound_operation is called to convert an expression
6756 consisting of shifts and ANDs into the equivalent compound expression.
6757 It is the inverse of this function, loosely speaking. */
6760 expand_compound_operation (rtx x)
6762 unsigned HOST_WIDE_INT pos = 0, len;
6764 unsigned int modewidth;
6767 switch (GET_CODE (x))
6772 /* We can't necessarily use a const_int for a multiword mode;
6773 it depends on implicitly extending the value.
6774 Since we don't know the right way to extend it,
6775 we can't tell whether the implicit way is right.
6777 Even for a mode that is no wider than a const_int,
6778 we can't win, because we need to sign extend one of its bits through
6779 the rest of it, and we don't know which bit. */
6780 if (CONST_INT_P (XEXP (x, 0)))
6783 /* Return if (subreg:MODE FROM 0) is not a safe replacement for
6784 (zero_extend:MODE FROM) or (sign_extend:MODE FROM). It is for any MEM
6785 because (SUBREG (MEM...)) is guaranteed to cause the MEM to be
6786 reloaded. If not for that, MEM's would very rarely be safe.
6788 Reject MODEs bigger than a word, because we might not be able
6789 to reference a two-register group starting with an arbitrary register
6790 (and currently gen_lowpart might crash for a SUBREG). */
6792 if (GET_MODE_SIZE (GET_MODE (XEXP (x, 0))) > UNITS_PER_WORD)
6795 /* Reject MODEs that aren't scalar integers because turning vector
6796 or complex modes into shifts causes problems. */
6798 if (! SCALAR_INT_MODE_P (GET_MODE (XEXP (x, 0))))
6801 len = GET_MODE_PRECISION (GET_MODE (XEXP (x, 0)));
6802 /* If the inner object has VOIDmode (the only way this can happen
6803 is if it is an ASM_OPERANDS), we can't do anything since we don't
6804 know how much masking to do. */
6813 /* ... fall through ... */
6816 /* If the operand is a CLOBBER, just return it. */
6817 if (GET_CODE (XEXP (x, 0)) == CLOBBER)
6820 if (!CONST_INT_P (XEXP (x, 1))
6821 || !CONST_INT_P (XEXP (x, 2))
6822 || GET_MODE (XEXP (x, 0)) == VOIDmode)
6825 /* Reject MODEs that aren't scalar integers because turning vector
6826 or complex modes into shifts causes problems. */
6828 if (! SCALAR_INT_MODE_P (GET_MODE (XEXP (x, 0))))
6831 len = INTVAL (XEXP (x, 1));
6832 pos = INTVAL (XEXP (x, 2));
6834 /* This should stay within the object being extracted, fail otherwise. */
6835 if (len + pos > GET_MODE_PRECISION (GET_MODE (XEXP (x, 0))))
6838 if (BITS_BIG_ENDIAN)
6839 pos = GET_MODE_PRECISION (GET_MODE (XEXP (x, 0))) - len - pos;
6846 /* Convert sign extension to zero extension, if we know that the high
6847 bit is not set, as this is easier to optimize. It will be converted
6848 back to cheaper alternative in make_extraction. */
6849 if (GET_CODE (x) == SIGN_EXTEND
6850 && (HWI_COMPUTABLE_MODE_P (GET_MODE (x))
6851 && ((nonzero_bits (XEXP (x, 0), GET_MODE (XEXP (x, 0)))
6852 & ~(((unsigned HOST_WIDE_INT)
6853 GET_MODE_MASK (GET_MODE (XEXP (x, 0))))
6857 rtx temp = gen_rtx_ZERO_EXTEND (GET_MODE (x), XEXP (x, 0));
6858 rtx temp2 = expand_compound_operation (temp);
6860 /* Make sure this is a profitable operation. */
6861 if (set_src_cost (x, optimize_this_for_speed_p)
6862 > set_src_cost (temp2, optimize_this_for_speed_p))
6864 else if (set_src_cost (x, optimize_this_for_speed_p)
6865 > set_src_cost (temp, optimize_this_for_speed_p))
6871 /* We can optimize some special cases of ZERO_EXTEND. */
6872 if (GET_CODE (x) == ZERO_EXTEND)
6874 /* (zero_extend:DI (truncate:SI foo:DI)) is just foo:DI if we
6875 know that the last value didn't have any inappropriate bits
6877 if (GET_CODE (XEXP (x, 0)) == TRUNCATE
6878 && GET_MODE (XEXP (XEXP (x, 0), 0)) == GET_MODE (x)
6879 && HWI_COMPUTABLE_MODE_P (GET_MODE (x))
6880 && (nonzero_bits (XEXP (XEXP (x, 0), 0), GET_MODE (x))
6881 & ~GET_MODE_MASK (GET_MODE (XEXP (x, 0)))) == 0)
6882 return XEXP (XEXP (x, 0), 0);
6884 /* Likewise for (zero_extend:DI (subreg:SI foo:DI 0)). */
6885 if (GET_CODE (XEXP (x, 0)) == SUBREG
6886 && GET_MODE (SUBREG_REG (XEXP (x, 0))) == GET_MODE (x)
6887 && subreg_lowpart_p (XEXP (x, 0))
6888 && HWI_COMPUTABLE_MODE_P (GET_MODE (x))
6889 && (nonzero_bits (SUBREG_REG (XEXP (x, 0)), GET_MODE (x))
6890 & ~GET_MODE_MASK (GET_MODE (XEXP (x, 0)))) == 0)
6891 return SUBREG_REG (XEXP (x, 0));
6893 /* (zero_extend:DI (truncate:SI foo:DI)) is just foo:DI when foo
6894 is a comparison and STORE_FLAG_VALUE permits. This is like
6895 the first case, but it works even when GET_MODE (x) is larger
6896 than HOST_WIDE_INT. */
6897 if (GET_CODE (XEXP (x, 0)) == TRUNCATE
6898 && GET_MODE (XEXP (XEXP (x, 0), 0)) == GET_MODE (x)
6899 && COMPARISON_P (XEXP (XEXP (x, 0), 0))
6900 && (GET_MODE_PRECISION (GET_MODE (XEXP (x, 0)))
6901 <= HOST_BITS_PER_WIDE_INT)
6902 && (STORE_FLAG_VALUE & ~GET_MODE_MASK (GET_MODE (XEXP (x, 0)))) == 0)
6903 return XEXP (XEXP (x, 0), 0);
6905 /* Likewise for (zero_extend:DI (subreg:SI foo:DI 0)). */
6906 if (GET_CODE (XEXP (x, 0)) == SUBREG
6907 && GET_MODE (SUBREG_REG (XEXP (x, 0))) == GET_MODE (x)
6908 && subreg_lowpart_p (XEXP (x, 0))
6909 && COMPARISON_P (SUBREG_REG (XEXP (x, 0)))
6910 && (GET_MODE_PRECISION (GET_MODE (XEXP (x, 0)))
6911 <= HOST_BITS_PER_WIDE_INT)
6912 && (STORE_FLAG_VALUE & ~GET_MODE_MASK (GET_MODE (XEXP (x, 0)))) == 0)
6913 return SUBREG_REG (XEXP (x, 0));
6917 /* If we reach here, we want to return a pair of shifts. The inner
6918 shift is a left shift of BITSIZE - POS - LEN bits. The outer
6919 shift is a right shift of BITSIZE - LEN bits. It is arithmetic or
6920 logical depending on the value of UNSIGNEDP.
6922 If this was a ZERO_EXTEND or ZERO_EXTRACT, this pair of shifts will be
6923 converted into an AND of a shift.
6925 We must check for the case where the left shift would have a negative
6926 count. This can happen in a case like (x >> 31) & 255 on machines
6927 that can't shift by a constant. On those machines, we would first
6928 combine the shift with the AND to produce a variable-position
6929 extraction. Then the constant of 31 would be substituted in
6930 to produce such a position. */
6932 modewidth = GET_MODE_PRECISION (GET_MODE (x));
6933 if (modewidth >= pos + len)
6935 enum machine_mode mode = GET_MODE (x);
6936 tem = gen_lowpart (mode, XEXP (x, 0));
6937 if (!tem || GET_CODE (tem) == CLOBBER)
6939 tem = simplify_shift_const (NULL_RTX, ASHIFT, mode,
6940 tem, modewidth - pos - len);
6941 tem = simplify_shift_const (NULL_RTX, unsignedp ? LSHIFTRT : ASHIFTRT,
6942 mode, tem, modewidth - len);
6944 else if (unsignedp && len < HOST_BITS_PER_WIDE_INT)
6945 tem = simplify_and_const_int (NULL_RTX, GET_MODE (x),
6946 simplify_shift_const (NULL_RTX, LSHIFTRT,
6949 ((unsigned HOST_WIDE_INT) 1 << len) - 1);
6951 /* Any other cases we can't handle. */
6954 /* If we couldn't do this for some reason, return the original
6956 if (GET_CODE (tem) == CLOBBER)
6962 /* X is a SET which contains an assignment of one object into
6963 a part of another (such as a bit-field assignment, STRICT_LOW_PART,
6964 or certain SUBREGS). If possible, convert it into a series of
6967 We half-heartedly support variable positions, but do not at all
6968 support variable lengths. */
6971 expand_field_assignment (const_rtx x)
6974 rtx pos; /* Always counts from low bit. */
6976 rtx mask, cleared, masked;
6977 enum machine_mode compute_mode;
6979 /* Loop until we find something we can't simplify. */
6982 if (GET_CODE (SET_DEST (x)) == STRICT_LOW_PART
6983 && GET_CODE (XEXP (SET_DEST (x), 0)) == SUBREG)
6985 inner = SUBREG_REG (XEXP (SET_DEST (x), 0));
6986 len = GET_MODE_PRECISION (GET_MODE (XEXP (SET_DEST (x), 0)));
6987 pos = GEN_INT (subreg_lsb (XEXP (SET_DEST (x), 0)));
6989 else if (GET_CODE (SET_DEST (x)) == ZERO_EXTRACT
6990 && CONST_INT_P (XEXP (SET_DEST (x), 1)))
6992 inner = XEXP (SET_DEST (x), 0);
6993 len = INTVAL (XEXP (SET_DEST (x), 1));
6994 pos = XEXP (SET_DEST (x), 2);
6996 /* A constant position should stay within the width of INNER. */
6997 if (CONST_INT_P (pos)
6998 && INTVAL (pos) + len > GET_MODE_PRECISION (GET_MODE (inner)))
7001 if (BITS_BIG_ENDIAN)
7003 if (CONST_INT_P (pos))
7004 pos = GEN_INT (GET_MODE_PRECISION (GET_MODE (inner)) - len
7006 else if (GET_CODE (pos) == MINUS
7007 && CONST_INT_P (XEXP (pos, 1))
7008 && (INTVAL (XEXP (pos, 1))
7009 == GET_MODE_PRECISION (GET_MODE (inner)) - len))
7010 /* If position is ADJUST - X, new position is X. */
7011 pos = XEXP (pos, 0);
7013 pos = simplify_gen_binary (MINUS, GET_MODE (pos),
7014 GEN_INT (GET_MODE_PRECISION (
7021 /* A SUBREG between two modes that occupy the same numbers of words
7022 can be done by moving the SUBREG to the source. */
7023 else if (GET_CODE (SET_DEST (x)) == SUBREG
7024 /* We need SUBREGs to compute nonzero_bits properly. */
7025 && nonzero_sign_valid
7026 && (((GET_MODE_SIZE (GET_MODE (SET_DEST (x)))
7027 + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD)
7028 == ((GET_MODE_SIZE (GET_MODE (SUBREG_REG (SET_DEST (x))))
7029 + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD)))
7031 x = gen_rtx_SET (VOIDmode, SUBREG_REG (SET_DEST (x)),
7033 (GET_MODE (SUBREG_REG (SET_DEST (x))),
7040 while (GET_CODE (inner) == SUBREG && subreg_lowpart_p (inner))
7041 inner = SUBREG_REG (inner);
7043 compute_mode = GET_MODE (inner);
7045 /* Don't attempt bitwise arithmetic on non scalar integer modes. */
7046 if (! SCALAR_INT_MODE_P (compute_mode))
7048 enum machine_mode imode;
7050 /* Don't do anything for vector or complex integral types. */
7051 if (! FLOAT_MODE_P (compute_mode))
7054 /* Try to find an integral mode to pun with. */
7055 imode = mode_for_size (GET_MODE_BITSIZE (compute_mode), MODE_INT, 0);
7056 if (imode == BLKmode)
7059 compute_mode = imode;
7060 inner = gen_lowpart (imode, inner);
7063 /* Compute a mask of LEN bits, if we can do this on the host machine. */
7064 if (len >= HOST_BITS_PER_WIDE_INT)
7067 /* Now compute the equivalent expression. Make a copy of INNER
7068 for the SET_DEST in case it is a MEM into which we will substitute;
7069 we don't want shared RTL in that case. */
7070 mask = GEN_INT (((unsigned HOST_WIDE_INT) 1 << len) - 1);
7071 cleared = simplify_gen_binary (AND, compute_mode,
7072 simplify_gen_unary (NOT, compute_mode,
7073 simplify_gen_binary (ASHIFT,
7078 masked = simplify_gen_binary (ASHIFT, compute_mode,
7079 simplify_gen_binary (
7081 gen_lowpart (compute_mode, SET_SRC (x)),
7085 x = gen_rtx_SET (VOIDmode, copy_rtx (inner),
7086 simplify_gen_binary (IOR, compute_mode,
7093 /* Return an RTX for a reference to LEN bits of INNER. If POS_RTX is nonzero,
7094 it is an RTX that represents a variable starting position; otherwise,
7095 POS is the (constant) starting bit position (counted from the LSB).
7097 UNSIGNEDP is nonzero for an unsigned reference and zero for a
7100 IN_DEST is nonzero if this is a reference in the destination of a
7101 SET. This is used when a ZERO_ or SIGN_EXTRACT isn't needed. If nonzero,
7102 a STRICT_LOW_PART will be used, if zero, ZERO_EXTEND or SIGN_EXTEND will
7105 IN_COMPARE is nonzero if we are in a COMPARE. This means that a
7106 ZERO_EXTRACT should be built even for bits starting at bit 0.
7108 MODE is the desired mode of the result (if IN_DEST == 0).
7110 The result is an RTX for the extraction or NULL_RTX if the target
7114 make_extraction (enum machine_mode mode, rtx inner, HOST_WIDE_INT pos,
7115 rtx pos_rtx, unsigned HOST_WIDE_INT len, int unsignedp,
7116 int in_dest, int in_compare)
7118 /* This mode describes the size of the storage area
7119 to fetch the overall value from. Within that, we
7120 ignore the POS lowest bits, etc. */
7121 enum machine_mode is_mode = GET_MODE (inner);
7122 enum machine_mode inner_mode;
7123 enum machine_mode wanted_inner_mode;
7124 enum machine_mode wanted_inner_reg_mode = word_mode;
7125 enum machine_mode pos_mode = word_mode;
7126 enum machine_mode extraction_mode = word_mode;
7127 enum machine_mode tmode = mode_for_size (len, MODE_INT, 1);
7129 rtx orig_pos_rtx = pos_rtx;
7130 HOST_WIDE_INT orig_pos;
7132 if (GET_CODE (inner) == SUBREG && subreg_lowpart_p (inner))
7134 /* If going from (subreg:SI (mem:QI ...)) to (mem:QI ...),
7135 consider just the QI as the memory to extract from.
7136 The subreg adds or removes high bits; its mode is
7137 irrelevant to the meaning of this extraction,
7138 since POS and LEN count from the lsb. */
7139 if (MEM_P (SUBREG_REG (inner)))
7140 is_mode = GET_MODE (SUBREG_REG (inner));
7141 inner = SUBREG_REG (inner);
7143 else if (GET_CODE (inner) == ASHIFT
7144 && CONST_INT_P (XEXP (inner, 1))
7145 && pos_rtx == 0 && pos == 0
7146 && len > UINTVAL (XEXP (inner, 1)))
7148 /* We're extracting the least significant bits of an rtx
7149 (ashift X (const_int C)), where LEN > C. Extract the
7150 least significant (LEN - C) bits of X, giving an rtx
7151 whose mode is MODE, then shift it left C times. */
7152 new_rtx = make_extraction (mode, XEXP (inner, 0),
7153 0, 0, len - INTVAL (XEXP (inner, 1)),
7154 unsignedp, in_dest, in_compare);
7156 return gen_rtx_ASHIFT (mode, new_rtx, XEXP (inner, 1));
7159 inner_mode = GET_MODE (inner);
7161 if (pos_rtx && CONST_INT_P (pos_rtx))
7162 pos = INTVAL (pos_rtx), pos_rtx = 0;
7164 /* See if this can be done without an extraction. We never can if the
7165 width of the field is not the same as that of some integer mode. For
7166 registers, we can only avoid the extraction if the position is at the
7167 low-order bit and this is either not in the destination or we have the
7168 appropriate STRICT_LOW_PART operation available.
7170 For MEM, we can avoid an extract if the field starts on an appropriate
7171 boundary and we can change the mode of the memory reference. */
7173 if (tmode != BLKmode
7174 && ((pos_rtx == 0 && (pos % BITS_PER_WORD) == 0
7176 && (inner_mode == tmode
7178 || TRULY_NOOP_TRUNCATION_MODES_P (tmode, inner_mode)
7179 || reg_truncated_to_mode (tmode, inner))
7182 && have_insn_for (STRICT_LOW_PART, tmode))))
7183 || (MEM_P (inner) && pos_rtx == 0
7185 % (STRICT_ALIGNMENT ? GET_MODE_ALIGNMENT (tmode)
7186 : BITS_PER_UNIT)) == 0
7187 /* We can't do this if we are widening INNER_MODE (it
7188 may not be aligned, for one thing). */
7189 && GET_MODE_PRECISION (inner_mode) >= GET_MODE_PRECISION (tmode)
7190 && (inner_mode == tmode
7191 || (! mode_dependent_address_p (XEXP (inner, 0))
7192 && ! MEM_VOLATILE_P (inner))))))
7194 /* If INNER is a MEM, make a new MEM that encompasses just the desired
7195 field. If the original and current mode are the same, we need not
7196 adjust the offset. Otherwise, we do if bytes big endian.
7198 If INNER is not a MEM, get a piece consisting of just the field
7199 of interest (in this case POS % BITS_PER_WORD must be 0). */
7203 HOST_WIDE_INT offset;
7205 /* POS counts from lsb, but make OFFSET count in memory order. */
7206 if (BYTES_BIG_ENDIAN)
7207 offset = (GET_MODE_PRECISION (is_mode) - len - pos) / BITS_PER_UNIT;
7209 offset = pos / BITS_PER_UNIT;
7211 new_rtx = adjust_address_nv (inner, tmode, offset);
7213 else if (REG_P (inner))
7215 if (tmode != inner_mode)
7217 /* We can't call gen_lowpart in a DEST since we
7218 always want a SUBREG (see below) and it would sometimes
7219 return a new hard register. */
7222 HOST_WIDE_INT final_word = pos / BITS_PER_WORD;
7224 if (WORDS_BIG_ENDIAN
7225 && GET_MODE_SIZE (inner_mode) > UNITS_PER_WORD)
7226 final_word = ((GET_MODE_SIZE (inner_mode)
7227 - GET_MODE_SIZE (tmode))
7228 / UNITS_PER_WORD) - final_word;
7230 final_word *= UNITS_PER_WORD;
7231 if (BYTES_BIG_ENDIAN &&
7232 GET_MODE_SIZE (inner_mode) > GET_MODE_SIZE (tmode))
7233 final_word += (GET_MODE_SIZE (inner_mode)
7234 - GET_MODE_SIZE (tmode)) % UNITS_PER_WORD;
7236 /* Avoid creating invalid subregs, for example when
7237 simplifying (x>>32)&255. */
7238 if (!validate_subreg (tmode, inner_mode, inner, final_word))
7241 new_rtx = gen_rtx_SUBREG (tmode, inner, final_word);
7244 new_rtx = gen_lowpart (tmode, inner);
7250 new_rtx = force_to_mode (inner, tmode,
7251 len >= HOST_BITS_PER_WIDE_INT
7252 ? ~(unsigned HOST_WIDE_INT) 0
7253 : ((unsigned HOST_WIDE_INT) 1 << len) - 1,
7256 /* If this extraction is going into the destination of a SET,
7257 make a STRICT_LOW_PART unless we made a MEM. */
7260 return (MEM_P (new_rtx) ? new_rtx
7261 : (GET_CODE (new_rtx) != SUBREG
7262 ? gen_rtx_CLOBBER (tmode, const0_rtx)
7263 : gen_rtx_STRICT_LOW_PART (VOIDmode, new_rtx)));
7268 if (CONST_INT_P (new_rtx)
7269 || GET_CODE (new_rtx) == CONST_DOUBLE)
7270 return simplify_unary_operation (unsignedp ? ZERO_EXTEND : SIGN_EXTEND,
7271 mode, new_rtx, tmode);
7273 /* If we know that no extraneous bits are set, and that the high
7274 bit is not set, convert the extraction to the cheaper of
7275 sign and zero extension, that are equivalent in these cases. */
7276 if (flag_expensive_optimizations
7277 && (HWI_COMPUTABLE_MODE_P (tmode)
7278 && ((nonzero_bits (new_rtx, tmode)
7279 & ~(((unsigned HOST_WIDE_INT)GET_MODE_MASK (tmode)) >> 1))
7282 rtx temp = gen_rtx_ZERO_EXTEND (mode, new_rtx);
7283 rtx temp1 = gen_rtx_SIGN_EXTEND (mode, new_rtx);
7285 /* Prefer ZERO_EXTENSION, since it gives more information to
7287 if (set_src_cost (temp, optimize_this_for_speed_p)
7288 <= set_src_cost (temp1, optimize_this_for_speed_p))
7293 /* Otherwise, sign- or zero-extend unless we already are in the
7296 return (gen_rtx_fmt_e (unsignedp ? ZERO_EXTEND : SIGN_EXTEND,
7300 /* Unless this is a COMPARE or we have a funny memory reference,
7301 don't do anything with zero-extending field extracts starting at
7302 the low-order bit since they are simple AND operations. */
7303 if (pos_rtx == 0 && pos == 0 && ! in_dest
7304 && ! in_compare && unsignedp)
7307 /* Unless INNER is not MEM, reject this if we would be spanning bytes or
7308 if the position is not a constant and the length is not 1. In all
7309 other cases, we would only be going outside our object in cases when
7310 an original shift would have been undefined. */
7312 && ((pos_rtx == 0 && pos + len > GET_MODE_PRECISION (is_mode))
7313 || (pos_rtx != 0 && len != 1)))
7316 /* Get the mode to use should INNER not be a MEM, the mode for the position,
7317 and the mode for the result. */
7318 if (in_dest && mode_for_extraction (EP_insv, -1) != MAX_MACHINE_MODE)
7320 wanted_inner_reg_mode = mode_for_extraction (EP_insv, 0);
7321 pos_mode = mode_for_extraction (EP_insv, 2);
7322 extraction_mode = mode_for_extraction (EP_insv, 3);
7325 if (! in_dest && unsignedp
7326 && mode_for_extraction (EP_extzv, -1) != MAX_MACHINE_MODE)
7328 wanted_inner_reg_mode = mode_for_extraction (EP_extzv, 1);
7329 pos_mode = mode_for_extraction (EP_extzv, 3);
7330 extraction_mode = mode_for_extraction (EP_extzv, 0);
7333 if (! in_dest && ! unsignedp
7334 && mode_for_extraction (EP_extv, -1) != MAX_MACHINE_MODE)
7336 wanted_inner_reg_mode = mode_for_extraction (EP_extv, 1);
7337 pos_mode = mode_for_extraction (EP_extv, 3);
7338 extraction_mode = mode_for_extraction (EP_extv, 0);
7341 /* Never narrow an object, since that might not be safe. */
7343 if (mode != VOIDmode
7344 && GET_MODE_SIZE (extraction_mode) < GET_MODE_SIZE (mode))
7345 extraction_mode = mode;
7347 if (pos_rtx && GET_MODE (pos_rtx) != VOIDmode
7348 && GET_MODE_SIZE (pos_mode) < GET_MODE_SIZE (GET_MODE (pos_rtx)))
7349 pos_mode = GET_MODE (pos_rtx);
7351 /* If this is not from memory, the desired mode is the preferred mode
7352 for an extraction pattern's first input operand, or word_mode if there
7355 wanted_inner_mode = wanted_inner_reg_mode;
7358 /* Be careful not to go beyond the extracted object and maintain the
7359 natural alignment of the memory. */
7360 wanted_inner_mode = smallest_mode_for_size (len, MODE_INT);
7361 while (pos % GET_MODE_BITSIZE (wanted_inner_mode) + len
7362 > GET_MODE_BITSIZE (wanted_inner_mode))
7364 wanted_inner_mode = GET_MODE_WIDER_MODE (wanted_inner_mode);
7365 gcc_assert (wanted_inner_mode != VOIDmode);
7368 /* If we have to change the mode of memory and cannot, the desired mode
7369 is EXTRACTION_MODE. */
7370 if (inner_mode != wanted_inner_mode
7371 && (mode_dependent_address_p (XEXP (inner, 0))
7372 || MEM_VOLATILE_P (inner)
7374 wanted_inner_mode = extraction_mode;
7379 if (BITS_BIG_ENDIAN)
7381 /* POS is passed as if BITS_BIG_ENDIAN == 0, so we need to convert it to
7382 BITS_BIG_ENDIAN style. If position is constant, compute new
7383 position. Otherwise, build subtraction.
7384 Note that POS is relative to the mode of the original argument.
7385 If it's a MEM we need to recompute POS relative to that.
7386 However, if we're extracting from (or inserting into) a register,
7387 we want to recompute POS relative to wanted_inner_mode. */
7388 int width = (MEM_P (inner)
7389 ? GET_MODE_BITSIZE (is_mode)
7390 : GET_MODE_BITSIZE (wanted_inner_mode));
7393 pos = width - len - pos;
7396 = gen_rtx_MINUS (GET_MODE (pos_rtx), GEN_INT (width - len), pos_rtx);
7397 /* POS may be less than 0 now, but we check for that below.
7398 Note that it can only be less than 0 if !MEM_P (inner). */
7401 /* If INNER has a wider mode, and this is a constant extraction, try to
7402 make it smaller and adjust the byte to point to the byte containing
7404 if (wanted_inner_mode != VOIDmode
7405 && inner_mode != wanted_inner_mode
7407 && GET_MODE_SIZE (wanted_inner_mode) < GET_MODE_SIZE (is_mode)
7409 && ! mode_dependent_address_p (XEXP (inner, 0))
7410 && ! MEM_VOLATILE_P (inner))
7414 /* The computations below will be correct if the machine is big
7415 endian in both bits and bytes or little endian in bits and bytes.
7416 If it is mixed, we must adjust. */
7418 /* If bytes are big endian and we had a paradoxical SUBREG, we must
7419 adjust OFFSET to compensate. */
7420 if (BYTES_BIG_ENDIAN
7421 && GET_MODE_SIZE (inner_mode) < GET_MODE_SIZE (is_mode))
7422 offset -= GET_MODE_SIZE (is_mode) - GET_MODE_SIZE (inner_mode);
7424 /* We can now move to the desired byte. */
7425 offset += (pos / GET_MODE_BITSIZE (wanted_inner_mode))
7426 * GET_MODE_SIZE (wanted_inner_mode);
7427 pos %= GET_MODE_BITSIZE (wanted_inner_mode);
7429 if (BYTES_BIG_ENDIAN != BITS_BIG_ENDIAN
7430 && is_mode != wanted_inner_mode)
7431 offset = (GET_MODE_SIZE (is_mode)
7432 - GET_MODE_SIZE (wanted_inner_mode) - offset);
7434 inner = adjust_address_nv (inner, wanted_inner_mode, offset);
7437 /* If INNER is not memory, get it into the proper mode. If we are changing
7438 its mode, POS must be a constant and smaller than the size of the new
7440 else if (!MEM_P (inner))
7442 /* On the LHS, don't create paradoxical subregs implicitely truncating
7443 the register unless TRULY_NOOP_TRUNCATION. */
7445 && !TRULY_NOOP_TRUNCATION_MODES_P (GET_MODE (inner),
7449 if (GET_MODE (inner) != wanted_inner_mode
7451 || orig_pos + len > GET_MODE_BITSIZE (wanted_inner_mode)))
7457 inner = force_to_mode (inner, wanted_inner_mode,
7459 || len + orig_pos >= HOST_BITS_PER_WIDE_INT
7460 ? ~(unsigned HOST_WIDE_INT) 0
7461 : ((((unsigned HOST_WIDE_INT) 1 << len) - 1)
7466 /* Adjust mode of POS_RTX, if needed. If we want a wider mode, we
7467 have to zero extend. Otherwise, we can just use a SUBREG. */
7469 && GET_MODE_SIZE (pos_mode) > GET_MODE_SIZE (GET_MODE (pos_rtx)))
7471 rtx temp = gen_rtx_ZERO_EXTEND (pos_mode, pos_rtx);
7473 /* If we know that no extraneous bits are set, and that the high
7474 bit is not set, convert extraction to cheaper one - either
7475 SIGN_EXTENSION or ZERO_EXTENSION, that are equivalent in these
7477 if (flag_expensive_optimizations
7478 && (HWI_COMPUTABLE_MODE_P (GET_MODE (pos_rtx))
7479 && ((nonzero_bits (pos_rtx, GET_MODE (pos_rtx))
7480 & ~(((unsigned HOST_WIDE_INT)
7481 GET_MODE_MASK (GET_MODE (pos_rtx)))
7485 rtx temp1 = gen_rtx_SIGN_EXTEND (pos_mode, pos_rtx);
7487 /* Prefer ZERO_EXTENSION, since it gives more information to
7489 if (set_src_cost (temp1, optimize_this_for_speed_p)
7490 < set_src_cost (temp, optimize_this_for_speed_p))
7495 else if (pos_rtx != 0
7496 && GET_MODE_SIZE (pos_mode) < GET_MODE_SIZE (GET_MODE (pos_rtx)))
7497 pos_rtx = gen_lowpart (pos_mode, pos_rtx);
7499 /* Make POS_RTX unless we already have it and it is correct. If we don't
7500 have a POS_RTX but we do have an ORIG_POS_RTX, the latter must
7502 if (pos_rtx == 0 && orig_pos_rtx != 0 && INTVAL (orig_pos_rtx) == pos)
7503 pos_rtx = orig_pos_rtx;
7505 else if (pos_rtx == 0)
7506 pos_rtx = GEN_INT (pos);
7508 /* Make the required operation. See if we can use existing rtx. */
7509 new_rtx = gen_rtx_fmt_eee (unsignedp ? ZERO_EXTRACT : SIGN_EXTRACT,
7510 extraction_mode, inner, GEN_INT (len), pos_rtx);
7512 new_rtx = gen_lowpart (mode, new_rtx);
7517 /* See if X contains an ASHIFT of COUNT or more bits that can be commuted
7518 with any other operations in X. Return X without that shift if so. */
7521 extract_left_shift (rtx x, int count)
7523 enum rtx_code code = GET_CODE (x);
7524 enum machine_mode mode = GET_MODE (x);
7530 /* This is the shift itself. If it is wide enough, we will return
7531 either the value being shifted if the shift count is equal to
7532 COUNT or a shift for the difference. */
7533 if (CONST_INT_P (XEXP (x, 1))
7534 && INTVAL (XEXP (x, 1)) >= count)
7535 return simplify_shift_const (NULL_RTX, ASHIFT, mode, XEXP (x, 0),
7536 INTVAL (XEXP (x, 1)) - count);
7540 if ((tem = extract_left_shift (XEXP (x, 0), count)) != 0)
7541 return simplify_gen_unary (code, mode, tem, mode);
7545 case PLUS: case IOR: case XOR: case AND:
7546 /* If we can safely shift this constant and we find the inner shift,
7547 make a new operation. */
7548 if (CONST_INT_P (XEXP (x, 1))
7549 && (UINTVAL (XEXP (x, 1))
7550 & ((((unsigned HOST_WIDE_INT) 1 << count)) - 1)) == 0
7551 && (tem = extract_left_shift (XEXP (x, 0), count)) != 0)
7552 return simplify_gen_binary (code, mode, tem,
7553 GEN_INT (INTVAL (XEXP (x, 1)) >> count));
7564 /* Look at the expression rooted at X. Look for expressions
7565 equivalent to ZERO_EXTRACT, SIGN_EXTRACT, ZERO_EXTEND, SIGN_EXTEND.
7566 Form these expressions.
7568 Return the new rtx, usually just X.
7570 Also, for machines like the VAX that don't have logical shift insns,
7571 try to convert logical to arithmetic shift operations in cases where
7572 they are equivalent. This undoes the canonicalizations to logical
7573 shifts done elsewhere.
7575 We try, as much as possible, to re-use rtl expressions to save memory.
7577 IN_CODE says what kind of expression we are processing. Normally, it is
7578 SET. In a memory address (inside a MEM, PLUS or minus, the latter two
7579 being kludges), it is MEM. When processing the arguments of a comparison
7580 or a COMPARE against zero, it is COMPARE. */
7583 make_compound_operation (rtx x, enum rtx_code in_code)
7585 enum rtx_code code = GET_CODE (x);
7586 enum machine_mode mode = GET_MODE (x);
7587 int mode_width = GET_MODE_PRECISION (mode);
7589 enum rtx_code next_code;
7595 /* Select the code to be used in recursive calls. Once we are inside an
7596 address, we stay there. If we have a comparison, set to COMPARE,
7597 but once inside, go back to our default of SET. */
7599 next_code = (code == MEM ? MEM
7600 : ((code == PLUS || code == MINUS)
7601 && SCALAR_INT_MODE_P (mode)) ? MEM
7602 : ((code == COMPARE || COMPARISON_P (x))
7603 && XEXP (x, 1) == const0_rtx) ? COMPARE
7604 : in_code == COMPARE ? SET : in_code);
7606 /* Process depending on the code of this operation. If NEW is set
7607 nonzero, it will be returned. */
7612 /* Convert shifts by constants into multiplications if inside
7614 if (in_code == MEM && CONST_INT_P (XEXP (x, 1))
7615 && INTVAL (XEXP (x, 1)) < HOST_BITS_PER_WIDE_INT
7616 && INTVAL (XEXP (x, 1)) >= 0
7617 && SCALAR_INT_MODE_P (mode))
7619 HOST_WIDE_INT count = INTVAL (XEXP (x, 1));
7620 HOST_WIDE_INT multval = (HOST_WIDE_INT) 1 << count;
7622 new_rtx = make_compound_operation (XEXP (x, 0), next_code);
7623 if (GET_CODE (new_rtx) == NEG)
7625 new_rtx = XEXP (new_rtx, 0);
7628 multval = trunc_int_for_mode (multval, mode);
7629 new_rtx = gen_rtx_MULT (mode, new_rtx, GEN_INT (multval));
7636 lhs = make_compound_operation (lhs, next_code);
7637 rhs = make_compound_operation (rhs, next_code);
7638 if (GET_CODE (lhs) == MULT && GET_CODE (XEXP (lhs, 0)) == NEG
7639 && SCALAR_INT_MODE_P (mode))
7641 tem = simplify_gen_binary (MULT, mode, XEXP (XEXP (lhs, 0), 0),
7643 new_rtx = simplify_gen_binary (MINUS, mode, rhs, tem);
7645 else if (GET_CODE (lhs) == MULT
7646 && (CONST_INT_P (XEXP (lhs, 1)) && INTVAL (XEXP (lhs, 1)) < 0))
7648 tem = simplify_gen_binary (MULT, mode, XEXP (lhs, 0),
7649 simplify_gen_unary (NEG, mode,
7652 new_rtx = simplify_gen_binary (MINUS, mode, rhs, tem);
7656 SUBST (XEXP (x, 0), lhs);
7657 SUBST (XEXP (x, 1), rhs);
7660 x = gen_lowpart (mode, new_rtx);
7666 lhs = make_compound_operation (lhs, next_code);
7667 rhs = make_compound_operation (rhs, next_code);
7668 if (GET_CODE (rhs) == MULT && GET_CODE (XEXP (rhs, 0)) == NEG
7669 && SCALAR_INT_MODE_P (mode))
7671 tem = simplify_gen_binary (MULT, mode, XEXP (XEXP (rhs, 0), 0),
7673 new_rtx = simplify_gen_binary (PLUS, mode, tem, lhs);
7675 else if (GET_CODE (rhs) == MULT
7676 && (CONST_INT_P (XEXP (rhs, 1)) && INTVAL (XEXP (rhs, 1)) < 0))
7678 tem = simplify_gen_binary (MULT, mode, XEXP (rhs, 0),
7679 simplify_gen_unary (NEG, mode,
7682 new_rtx = simplify_gen_binary (PLUS, mode, tem, lhs);
7686 SUBST (XEXP (x, 0), lhs);
7687 SUBST (XEXP (x, 1), rhs);
7690 return gen_lowpart (mode, new_rtx);
7693 /* If the second operand is not a constant, we can't do anything
7695 if (!CONST_INT_P (XEXP (x, 1)))
7698 /* If the constant is a power of two minus one and the first operand
7699 is a logical right shift, make an extraction. */
7700 if (GET_CODE (XEXP (x, 0)) == LSHIFTRT
7701 && (i = exact_log2 (UINTVAL (XEXP (x, 1)) + 1)) >= 0)
7703 new_rtx = make_compound_operation (XEXP (XEXP (x, 0), 0), next_code);
7704 new_rtx = make_extraction (mode, new_rtx, 0, XEXP (XEXP (x, 0), 1), i, 1,
7705 0, in_code == COMPARE);
7708 /* Same as previous, but for (subreg (lshiftrt ...)) in first op. */
7709 else if (GET_CODE (XEXP (x, 0)) == SUBREG
7710 && subreg_lowpart_p (XEXP (x, 0))
7711 && GET_CODE (SUBREG_REG (XEXP (x, 0))) == LSHIFTRT
7712 && (i = exact_log2 (UINTVAL (XEXP (x, 1)) + 1)) >= 0)
7714 new_rtx = make_compound_operation (XEXP (SUBREG_REG (XEXP (x, 0)), 0),
7716 new_rtx = make_extraction (GET_MODE (SUBREG_REG (XEXP (x, 0))), new_rtx, 0,
7717 XEXP (SUBREG_REG (XEXP (x, 0)), 1), i, 1,
7718 0, in_code == COMPARE);
7720 /* Same as previous, but for (xor/ior (lshiftrt...) (lshiftrt...)). */
7721 else if ((GET_CODE (XEXP (x, 0)) == XOR
7722 || GET_CODE (XEXP (x, 0)) == IOR)
7723 && GET_CODE (XEXP (XEXP (x, 0), 0)) == LSHIFTRT
7724 && GET_CODE (XEXP (XEXP (x, 0), 1)) == LSHIFTRT
7725 && (i = exact_log2 (UINTVAL (XEXP (x, 1)) + 1)) >= 0)
7727 /* Apply the distributive law, and then try to make extractions. */
7728 new_rtx = gen_rtx_fmt_ee (GET_CODE (XEXP (x, 0)), mode,
7729 gen_rtx_AND (mode, XEXP (XEXP (x, 0), 0),
7731 gen_rtx_AND (mode, XEXP (XEXP (x, 0), 1),
7733 new_rtx = make_compound_operation (new_rtx, in_code);
7736 /* If we are have (and (rotate X C) M) and C is larger than the number
7737 of bits in M, this is an extraction. */
7739 else if (GET_CODE (XEXP (x, 0)) == ROTATE
7740 && CONST_INT_P (XEXP (XEXP (x, 0), 1))
7741 && (i = exact_log2 (UINTVAL (XEXP (x, 1)) + 1)) >= 0
7742 && i <= INTVAL (XEXP (XEXP (x, 0), 1)))
7744 new_rtx = make_compound_operation (XEXP (XEXP (x, 0), 0), next_code);
7745 new_rtx = make_extraction (mode, new_rtx,
7746 (GET_MODE_PRECISION (mode)
7747 - INTVAL (XEXP (XEXP (x, 0), 1))),
7748 NULL_RTX, i, 1, 0, in_code == COMPARE);
7751 /* On machines without logical shifts, if the operand of the AND is
7752 a logical shift and our mask turns off all the propagated sign
7753 bits, we can replace the logical shift with an arithmetic shift. */
7754 else if (GET_CODE (XEXP (x, 0)) == LSHIFTRT
7755 && !have_insn_for (LSHIFTRT, mode)
7756 && have_insn_for (ASHIFTRT, mode)
7757 && CONST_INT_P (XEXP (XEXP (x, 0), 1))
7758 && INTVAL (XEXP (XEXP (x, 0), 1)) >= 0
7759 && INTVAL (XEXP (XEXP (x, 0), 1)) < HOST_BITS_PER_WIDE_INT
7760 && mode_width <= HOST_BITS_PER_WIDE_INT)
7762 unsigned HOST_WIDE_INT mask = GET_MODE_MASK (mode);
7764 mask >>= INTVAL (XEXP (XEXP (x, 0), 1));
7765 if ((INTVAL (XEXP (x, 1)) & ~mask) == 0)
7767 gen_rtx_ASHIFTRT (mode,
7768 make_compound_operation
7769 (XEXP (XEXP (x, 0), 0), next_code),
7770 XEXP (XEXP (x, 0), 1)));
7773 /* If the constant is one less than a power of two, this might be
7774 representable by an extraction even if no shift is present.
7775 If it doesn't end up being a ZERO_EXTEND, we will ignore it unless
7776 we are in a COMPARE. */
7777 else if ((i = exact_log2 (UINTVAL (XEXP (x, 1)) + 1)) >= 0)
7778 new_rtx = make_extraction (mode,
7779 make_compound_operation (XEXP (x, 0),
7781 0, NULL_RTX, i, 1, 0, in_code == COMPARE);
7783 /* If we are in a comparison and this is an AND with a power of two,
7784 convert this into the appropriate bit extract. */
7785 else if (in_code == COMPARE
7786 && (i = exact_log2 (UINTVAL (XEXP (x, 1)))) >= 0)
7787 new_rtx = make_extraction (mode,
7788 make_compound_operation (XEXP (x, 0),
7790 i, NULL_RTX, 1, 1, 0, 1);
7795 /* If the sign bit is known to be zero, replace this with an
7796 arithmetic shift. */
7797 if (have_insn_for (ASHIFTRT, mode)
7798 && ! have_insn_for (LSHIFTRT, mode)
7799 && mode_width <= HOST_BITS_PER_WIDE_INT
7800 && (nonzero_bits (XEXP (x, 0), mode) & (1 << (mode_width - 1))) == 0)
7802 new_rtx = gen_rtx_ASHIFTRT (mode,
7803 make_compound_operation (XEXP (x, 0),
7809 /* ... fall through ... */
7815 /* If we have (ashiftrt (ashift foo C1) C2) with C2 >= C1,
7816 this is a SIGN_EXTRACT. */
7817 if (CONST_INT_P (rhs)
7818 && GET_CODE (lhs) == ASHIFT
7819 && CONST_INT_P (XEXP (lhs, 1))
7820 && INTVAL (rhs) >= INTVAL (XEXP (lhs, 1))
7821 && INTVAL (XEXP (lhs, 1)) >= 0
7822 && INTVAL (rhs) < mode_width)
7824 new_rtx = make_compound_operation (XEXP (lhs, 0), next_code);
7825 new_rtx = make_extraction (mode, new_rtx,
7826 INTVAL (rhs) - INTVAL (XEXP (lhs, 1)),
7827 NULL_RTX, mode_width - INTVAL (rhs),
7828 code == LSHIFTRT, 0, in_code == COMPARE);
7832 /* See if we have operations between an ASHIFTRT and an ASHIFT.
7833 If so, try to merge the shifts into a SIGN_EXTEND. We could
7834 also do this for some cases of SIGN_EXTRACT, but it doesn't
7835 seem worth the effort; the case checked for occurs on Alpha. */
7838 && ! (GET_CODE (lhs) == SUBREG
7839 && (OBJECT_P (SUBREG_REG (lhs))))
7840 && CONST_INT_P (rhs)
7841 && INTVAL (rhs) < HOST_BITS_PER_WIDE_INT
7842 && INTVAL (rhs) < mode_width
7843 && (new_rtx = extract_left_shift (lhs, INTVAL (rhs))) != 0)
7844 new_rtx = make_extraction (mode, make_compound_operation (new_rtx, next_code),
7845 0, NULL_RTX, mode_width - INTVAL (rhs),
7846 code == LSHIFTRT, 0, in_code == COMPARE);
7851 /* Call ourselves recursively on the inner expression. If we are
7852 narrowing the object and it has a different RTL code from
7853 what it originally did, do this SUBREG as a force_to_mode. */
7855 rtx inner = SUBREG_REG (x), simplified;
7857 tem = make_compound_operation (inner, in_code);
7860 = simplify_subreg (mode, tem, GET_MODE (inner), SUBREG_BYTE (x));
7864 if (GET_CODE (tem) != GET_CODE (inner)
7865 && GET_MODE_SIZE (mode) < GET_MODE_SIZE (GET_MODE (inner))
7866 && subreg_lowpart_p (x))
7869 = force_to_mode (tem, mode, ~(unsigned HOST_WIDE_INT) 0, 0);
7871 /* If we have something other than a SUBREG, we might have
7872 done an expansion, so rerun ourselves. */
7873 if (GET_CODE (newer) != SUBREG)
7874 newer = make_compound_operation (newer, in_code);
7876 /* force_to_mode can expand compounds. If it just re-expanded the
7877 compound, use gen_lowpart to convert to the desired mode. */
7878 if (rtx_equal_p (newer, x)
7879 /* Likewise if it re-expanded the compound only partially.
7880 This happens for SUBREG of ZERO_EXTRACT if they extract
7881 the same number of bits. */
7882 || (GET_CODE (newer) == SUBREG
7883 && (GET_CODE (SUBREG_REG (newer)) == LSHIFTRT
7884 || GET_CODE (SUBREG_REG (newer)) == ASHIFTRT)
7885 && GET_CODE (inner) == AND
7886 && rtx_equal_p (SUBREG_REG (newer), XEXP (inner, 0))))
7887 return gen_lowpart (GET_MODE (x), tem);
7903 x = gen_lowpart (mode, new_rtx);
7904 code = GET_CODE (x);
7907 /* Now recursively process each operand of this operation. We need to
7908 handle ZERO_EXTEND specially so that we don't lose track of the
7910 if (GET_CODE (x) == ZERO_EXTEND)
7912 new_rtx = make_compound_operation (XEXP (x, 0), next_code);
7913 tem = simplify_const_unary_operation (ZERO_EXTEND, GET_MODE (x),
7914 new_rtx, GET_MODE (XEXP (x, 0)));
7917 SUBST (XEXP (x, 0), new_rtx);
7921 fmt = GET_RTX_FORMAT (code);
7922 for (i = 0; i < GET_RTX_LENGTH (code); i++)
7925 new_rtx = make_compound_operation (XEXP (x, i), next_code);
7926 SUBST (XEXP (x, i), new_rtx);
7928 else if (fmt[i] == 'E')
7929 for (j = 0; j < XVECLEN (x, i); j++)
7931 new_rtx = make_compound_operation (XVECEXP (x, i, j), next_code);
7932 SUBST (XVECEXP (x, i, j), new_rtx);
7936 /* If this is a commutative operation, the changes to the operands
7937 may have made it noncanonical. */
7938 if (COMMUTATIVE_ARITH_P (x)
7939 && swap_commutative_operands_p (XEXP (x, 0), XEXP (x, 1)))
7942 SUBST (XEXP (x, 0), XEXP (x, 1));
7943 SUBST (XEXP (x, 1), tem);
7949 /* Given M see if it is a value that would select a field of bits
7950 within an item, but not the entire word. Return -1 if not.
7951 Otherwise, return the starting position of the field, where 0 is the
7954 *PLEN is set to the length of the field. */
7957 get_pos_from_mask (unsigned HOST_WIDE_INT m, unsigned HOST_WIDE_INT *plen)
7959 /* Get the bit number of the first 1 bit from the right, -1 if none. */
7960 int pos = m ? ctz_hwi (m) : -1;
7964 /* Now shift off the low-order zero bits and see if we have a
7965 power of two minus 1. */
7966 len = exact_log2 ((m >> pos) + 1);
7975 /* If X refers to a register that equals REG in value, replace these
7976 references with REG. */
7978 canon_reg_for_combine (rtx x, rtx reg)
7985 enum rtx_code code = GET_CODE (x);
7986 switch (GET_RTX_CLASS (code))
7989 op0 = canon_reg_for_combine (XEXP (x, 0), reg);
7990 if (op0 != XEXP (x, 0))
7991 return simplify_gen_unary (GET_CODE (x), GET_MODE (x), op0,
7996 case RTX_COMM_ARITH:
7997 op0 = canon_reg_for_combine (XEXP (x, 0), reg);
7998 op1 = canon_reg_for_combine (XEXP (x, 1), reg);
7999 if (op0 != XEXP (x, 0) || op1 != XEXP (x, 1))
8000 return simplify_gen_binary (GET_CODE (x), GET_MODE (x), op0, op1);
8004 case RTX_COMM_COMPARE:
8005 op0 = canon_reg_for_combine (XEXP (x, 0), reg);
8006 op1 = canon_reg_for_combine (XEXP (x, 1), reg);
8007 if (op0 != XEXP (x, 0) || op1 != XEXP (x, 1))
8008 return simplify_gen_relational (GET_CODE (x), GET_MODE (x),
8009 GET_MODE (op0), op0, op1);
8013 case RTX_BITFIELD_OPS:
8014 op0 = canon_reg_for_combine (XEXP (x, 0), reg);
8015 op1 = canon_reg_for_combine (XEXP (x, 1), reg);
8016 op2 = canon_reg_for_combine (XEXP (x, 2), reg);
8017 if (op0 != XEXP (x, 0) || op1 != XEXP (x, 1) || op2 != XEXP (x, 2))
8018 return simplify_gen_ternary (GET_CODE (x), GET_MODE (x),
8019 GET_MODE (op0), op0, op1, op2);
8024 if (rtx_equal_p (get_last_value (reg), x)
8025 || rtx_equal_p (reg, get_last_value (x)))
8034 fmt = GET_RTX_FORMAT (code);
8036 for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
8039 rtx op = canon_reg_for_combine (XEXP (x, i), reg);
8040 if (op != XEXP (x, i))
8050 else if (fmt[i] == 'E')
8053 for (j = 0; j < XVECLEN (x, i); j++)
8055 rtx op = canon_reg_for_combine (XVECEXP (x, i, j), reg);
8056 if (op != XVECEXP (x, i, j))
8063 XVECEXP (x, i, j) = op;
8074 /* Return X converted to MODE. If the value is already truncated to
8075 MODE we can just return a subreg even though in the general case we
8076 would need an explicit truncation. */
8079 gen_lowpart_or_truncate (enum machine_mode mode, rtx x)
8081 if (!CONST_INT_P (x)
8082 && GET_MODE_SIZE (mode) < GET_MODE_SIZE (GET_MODE (x))
8083 && !TRULY_NOOP_TRUNCATION_MODES_P (mode, GET_MODE (x))
8084 && !(REG_P (x) && reg_truncated_to_mode (mode, x)))
8086 /* Bit-cast X into an integer mode. */
8087 if (!SCALAR_INT_MODE_P (GET_MODE (x)))
8088 x = gen_lowpart (int_mode_for_mode (GET_MODE (x)), x);
8089 x = simplify_gen_unary (TRUNCATE, int_mode_for_mode (mode),
8093 return gen_lowpart (mode, x);
8096 /* See if X can be simplified knowing that we will only refer to it in
8097 MODE and will only refer to those bits that are nonzero in MASK.
8098 If other bits are being computed or if masking operations are done
8099 that select a superset of the bits in MASK, they can sometimes be
8102 Return a possibly simplified expression, but always convert X to
8103 MODE. If X is a CONST_INT, AND the CONST_INT with MASK.
8105 If JUST_SELECT is nonzero, don't optimize by noticing that bits in MASK
8106 are all off in X. This is used when X will be complemented, by either
8107 NOT, NEG, or XOR. */
8110 force_to_mode (rtx x, enum machine_mode mode, unsigned HOST_WIDE_INT mask,
8113 enum rtx_code code = GET_CODE (x);
8114 int next_select = just_select || code == XOR || code == NOT || code == NEG;
8115 enum machine_mode op_mode;
8116 unsigned HOST_WIDE_INT fuller_mask, nonzero;
8119 /* If this is a CALL or ASM_OPERANDS, don't do anything. Some of the
8120 code below will do the wrong thing since the mode of such an
8121 expression is VOIDmode.
8123 Also do nothing if X is a CLOBBER; this can happen if X was
8124 the return value from a call to gen_lowpart. */
8125 if (code == CALL || code == ASM_OPERANDS || code == CLOBBER)
8128 /* We want to perform the operation is its present mode unless we know
8129 that the operation is valid in MODE, in which case we do the operation
8131 op_mode = ((GET_MODE_CLASS (mode) == GET_MODE_CLASS (GET_MODE (x))
8132 && have_insn_for (code, mode))
8133 ? mode : GET_MODE (x));
8135 /* It is not valid to do a right-shift in a narrower mode
8136 than the one it came in with. */
8137 if ((code == LSHIFTRT || code == ASHIFTRT)
8138 && GET_MODE_PRECISION (mode) < GET_MODE_PRECISION (GET_MODE (x)))
8139 op_mode = GET_MODE (x);
8141 /* Truncate MASK to fit OP_MODE. */
8143 mask &= GET_MODE_MASK (op_mode);
8145 /* When we have an arithmetic operation, or a shift whose count we
8146 do not know, we need to assume that all bits up to the highest-order
8147 bit in MASK will be needed. This is how we form such a mask. */
8148 if (mask & ((unsigned HOST_WIDE_INT) 1 << (HOST_BITS_PER_WIDE_INT - 1)))
8149 fuller_mask = ~(unsigned HOST_WIDE_INT) 0;
8151 fuller_mask = (((unsigned HOST_WIDE_INT) 1 << (floor_log2 (mask) + 1))
8154 /* Determine what bits of X are guaranteed to be (non)zero. */
8155 nonzero = nonzero_bits (x, mode);
8157 /* If none of the bits in X are needed, return a zero. */
8158 if (!just_select && (nonzero & mask) == 0 && !side_effects_p (x))
8161 /* If X is a CONST_INT, return a new one. Do this here since the
8162 test below will fail. */
8163 if (CONST_INT_P (x))
8165 if (SCALAR_INT_MODE_P (mode))
8166 return gen_int_mode (INTVAL (x) & mask, mode);
8169 x = GEN_INT (INTVAL (x) & mask);
8170 return gen_lowpart_common (mode, x);
8174 /* If X is narrower than MODE and we want all the bits in X's mode, just
8175 get X in the proper mode. */
8176 if (GET_MODE_SIZE (GET_MODE (x)) < GET_MODE_SIZE (mode)
8177 && (GET_MODE_MASK (GET_MODE (x)) & ~mask) == 0)
8178 return gen_lowpart (mode, x);
8180 /* We can ignore the effect of a SUBREG if it narrows the mode or
8181 if the constant masks to zero all the bits the mode doesn't have. */
8182 if (GET_CODE (x) == SUBREG
8183 && subreg_lowpart_p (x)
8184 && ((GET_MODE_SIZE (GET_MODE (x))
8185 < GET_MODE_SIZE (GET_MODE (SUBREG_REG (x))))
8187 & GET_MODE_MASK (GET_MODE (x))
8188 & ~GET_MODE_MASK (GET_MODE (SUBREG_REG (x)))))))
8189 return force_to_mode (SUBREG_REG (x), mode, mask, next_select);
8191 /* The arithmetic simplifications here only work for scalar integer modes. */
8192 if (!SCALAR_INT_MODE_P (mode) || !SCALAR_INT_MODE_P (GET_MODE (x)))
8193 return gen_lowpart_or_truncate (mode, x);
8198 /* If X is a (clobber (const_int)), return it since we know we are
8199 generating something that won't match. */
8206 x = expand_compound_operation (x);
8207 if (GET_CODE (x) != code)
8208 return force_to_mode (x, mode, mask, next_select);
8212 /* Similarly for a truncate. */
8213 return force_to_mode (XEXP (x, 0), mode, mask, next_select);
8216 /* If this is an AND with a constant, convert it into an AND
8217 whose constant is the AND of that constant with MASK. If it
8218 remains an AND of MASK, delete it since it is redundant. */
8220 if (CONST_INT_P (XEXP (x, 1)))
8222 x = simplify_and_const_int (x, op_mode, XEXP (x, 0),
8223 mask & INTVAL (XEXP (x, 1)));
8225 /* If X is still an AND, see if it is an AND with a mask that
8226 is just some low-order bits. If so, and it is MASK, we don't
8229 if (GET_CODE (x) == AND && CONST_INT_P (XEXP (x, 1))
8230 && ((INTVAL (XEXP (x, 1)) & GET_MODE_MASK (GET_MODE (x)))
8234 /* If it remains an AND, try making another AND with the bits
8235 in the mode mask that aren't in MASK turned on. If the
8236 constant in the AND is wide enough, this might make a
8237 cheaper constant. */
8239 if (GET_CODE (x) == AND && CONST_INT_P (XEXP (x, 1))
8240 && GET_MODE_MASK (GET_MODE (x)) != mask
8241 && HWI_COMPUTABLE_MODE_P (GET_MODE (x)))
8243 unsigned HOST_WIDE_INT cval
8244 = UINTVAL (XEXP (x, 1))
8245 | (GET_MODE_MASK (GET_MODE (x)) & ~mask);
8246 int width = GET_MODE_PRECISION (GET_MODE (x));
8249 /* If MODE is narrower than HOST_WIDE_INT and CVAL is a negative
8250 number, sign extend it. */
8251 if (width > 0 && width < HOST_BITS_PER_WIDE_INT
8252 && (cval & ((unsigned HOST_WIDE_INT) 1 << (width - 1))) != 0)
8253 cval |= (unsigned HOST_WIDE_INT) -1 << width;
8255 y = simplify_gen_binary (AND, GET_MODE (x),
8256 XEXP (x, 0), GEN_INT (cval));
8257 if (set_src_cost (y, optimize_this_for_speed_p)
8258 < set_src_cost (x, optimize_this_for_speed_p))
8268 /* In (and (plus FOO C1) M), if M is a mask that just turns off
8269 low-order bits (as in an alignment operation) and FOO is already
8270 aligned to that boundary, mask C1 to that boundary as well.
8271 This may eliminate that PLUS and, later, the AND. */
8274 unsigned int width = GET_MODE_PRECISION (mode);
8275 unsigned HOST_WIDE_INT smask = mask;
8277 /* If MODE is narrower than HOST_WIDE_INT and mask is a negative
8278 number, sign extend it. */
8280 if (width < HOST_BITS_PER_WIDE_INT
8281 && (smask & ((unsigned HOST_WIDE_INT) 1 << (width - 1))) != 0)
8282 smask |= (unsigned HOST_WIDE_INT) (-1) << width;
8284 if (CONST_INT_P (XEXP (x, 1))
8285 && exact_log2 (- smask) >= 0
8286 && (nonzero_bits (XEXP (x, 0), mode) & ~smask) == 0
8287 && (INTVAL (XEXP (x, 1)) & ~smask) != 0)
8288 return force_to_mode (plus_constant (XEXP (x, 0),
8289 (INTVAL (XEXP (x, 1)) & smask)),
8290 mode, smask, next_select);
8293 /* ... fall through ... */
8296 /* For PLUS, MINUS and MULT, we need any bits less significant than the
8297 most significant bit in MASK since carries from those bits will
8298 affect the bits we are interested in. */
8303 /* If X is (minus C Y) where C's least set bit is larger than any bit
8304 in the mask, then we may replace with (neg Y). */
8305 if (CONST_INT_P (XEXP (x, 0))
8306 && (((unsigned HOST_WIDE_INT) (INTVAL (XEXP (x, 0))
8307 & -INTVAL (XEXP (x, 0))))
8310 x = simplify_gen_unary (NEG, GET_MODE (x), XEXP (x, 1),
8312 return force_to_mode (x, mode, mask, next_select);
8315 /* Similarly, if C contains every bit in the fuller_mask, then we may
8316 replace with (not Y). */
8317 if (CONST_INT_P (XEXP (x, 0))
8318 && ((UINTVAL (XEXP (x, 0)) | fuller_mask) == UINTVAL (XEXP (x, 0))))
8320 x = simplify_gen_unary (NOT, GET_MODE (x),
8321 XEXP (x, 1), GET_MODE (x));
8322 return force_to_mode (x, mode, mask, next_select);
8330 /* If X is (ior (lshiftrt FOO C1) C2), try to commute the IOR and
8331 LSHIFTRT so we end up with an (and (lshiftrt (ior ...) ...) ...)
8332 operation which may be a bitfield extraction. Ensure that the
8333 constant we form is not wider than the mode of X. */
8335 if (GET_CODE (XEXP (x, 0)) == LSHIFTRT
8336 && CONST_INT_P (XEXP (XEXP (x, 0), 1))
8337 && INTVAL (XEXP (XEXP (x, 0), 1)) >= 0
8338 && INTVAL (XEXP (XEXP (x, 0), 1)) < HOST_BITS_PER_WIDE_INT
8339 && CONST_INT_P (XEXP (x, 1))
8340 && ((INTVAL (XEXP (XEXP (x, 0), 1))
8341 + floor_log2 (INTVAL (XEXP (x, 1))))
8342 < GET_MODE_PRECISION (GET_MODE (x)))
8343 && (UINTVAL (XEXP (x, 1))
8344 & ~nonzero_bits (XEXP (x, 0), GET_MODE (x))) == 0)
8346 temp = GEN_INT ((INTVAL (XEXP (x, 1)) & mask)
8347 << INTVAL (XEXP (XEXP (x, 0), 1)));
8348 temp = simplify_gen_binary (GET_CODE (x), GET_MODE (x),
8349 XEXP (XEXP (x, 0), 0), temp);
8350 x = simplify_gen_binary (LSHIFTRT, GET_MODE (x), temp,
8351 XEXP (XEXP (x, 0), 1));
8352 return force_to_mode (x, mode, mask, next_select);
8356 /* For most binary operations, just propagate into the operation and
8357 change the mode if we have an operation of that mode. */
8359 op0 = force_to_mode (XEXP (x, 0), mode, mask, next_select);
8360 op1 = force_to_mode (XEXP (x, 1), mode, mask, next_select);
8362 /* If we ended up truncating both operands, truncate the result of the
8363 operation instead. */
8364 if (GET_CODE (op0) == TRUNCATE
8365 && GET_CODE (op1) == TRUNCATE)
8367 op0 = XEXP (op0, 0);
8368 op1 = XEXP (op1, 0);
8371 op0 = gen_lowpart_or_truncate (op_mode, op0);
8372 op1 = gen_lowpart_or_truncate (op_mode, op1);
8374 if (op_mode != GET_MODE (x) || op0 != XEXP (x, 0) || op1 != XEXP (x, 1))
8375 x = simplify_gen_binary (code, op_mode, op0, op1);
8379 /* For left shifts, do the same, but just for the first operand.
8380 However, we cannot do anything with shifts where we cannot
8381 guarantee that the counts are smaller than the size of the mode
8382 because such a count will have a different meaning in a
8385 if (! (CONST_INT_P (XEXP (x, 1))
8386 && INTVAL (XEXP (x, 1)) >= 0
8387 && INTVAL (XEXP (x, 1)) < GET_MODE_PRECISION (mode))
8388 && ! (GET_MODE (XEXP (x, 1)) != VOIDmode
8389 && (nonzero_bits (XEXP (x, 1), GET_MODE (XEXP (x, 1)))
8390 < (unsigned HOST_WIDE_INT) GET_MODE_PRECISION (mode))))
8393 /* If the shift count is a constant and we can do arithmetic in
8394 the mode of the shift, refine which bits we need. Otherwise, use the
8395 conservative form of the mask. */
8396 if (CONST_INT_P (XEXP (x, 1))
8397 && INTVAL (XEXP (x, 1)) >= 0
8398 && INTVAL (XEXP (x, 1)) < GET_MODE_PRECISION (op_mode)
8399 && HWI_COMPUTABLE_MODE_P (op_mode))
8400 mask >>= INTVAL (XEXP (x, 1));
8404 op0 = gen_lowpart_or_truncate (op_mode,
8405 force_to_mode (XEXP (x, 0), op_mode,
8406 mask, next_select));
8408 if (op_mode != GET_MODE (x) || op0 != XEXP (x, 0))
8409 x = simplify_gen_binary (code, op_mode, op0, XEXP (x, 1));
8413 /* Here we can only do something if the shift count is a constant,
8414 this shift constant is valid for the host, and we can do arithmetic
8417 if (CONST_INT_P (XEXP (x, 1))
8418 && INTVAL (XEXP (x, 1)) < HOST_BITS_PER_WIDE_INT
8419 && HWI_COMPUTABLE_MODE_P (op_mode))
8421 rtx inner = XEXP (x, 0);
8422 unsigned HOST_WIDE_INT inner_mask;
8424 /* Select the mask of the bits we need for the shift operand. */
8425 inner_mask = mask << INTVAL (XEXP (x, 1));
8427 /* We can only change the mode of the shift if we can do arithmetic
8428 in the mode of the shift and INNER_MASK is no wider than the
8429 width of X's mode. */
8430 if ((inner_mask & ~GET_MODE_MASK (GET_MODE (x))) != 0)
8431 op_mode = GET_MODE (x);
8433 inner = force_to_mode (inner, op_mode, inner_mask, next_select);
8435 if (GET_MODE (x) != op_mode || inner != XEXP (x, 0))
8436 x = simplify_gen_binary (LSHIFTRT, op_mode, inner, XEXP (x, 1));
8439 /* If we have (and (lshiftrt FOO C1) C2) where the combination of the
8440 shift and AND produces only copies of the sign bit (C2 is one less
8441 than a power of two), we can do this with just a shift. */
8443 if (GET_CODE (x) == LSHIFTRT
8444 && CONST_INT_P (XEXP (x, 1))
8445 /* The shift puts one of the sign bit copies in the least significant
8447 && ((INTVAL (XEXP (x, 1))
8448 + num_sign_bit_copies (XEXP (x, 0), GET_MODE (XEXP (x, 0))))
8449 >= GET_MODE_PRECISION (GET_MODE (x)))
8450 && exact_log2 (mask + 1) >= 0
8451 /* Number of bits left after the shift must be more than the mask
8453 && ((INTVAL (XEXP (x, 1)) + exact_log2 (mask + 1))
8454 <= GET_MODE_PRECISION (GET_MODE (x)))
8455 /* Must be more sign bit copies than the mask needs. */
8456 && ((int) num_sign_bit_copies (XEXP (x, 0), GET_MODE (XEXP (x, 0)))
8457 >= exact_log2 (mask + 1)))
8458 x = simplify_gen_binary (LSHIFTRT, GET_MODE (x), XEXP (x, 0),
8459 GEN_INT (GET_MODE_PRECISION (GET_MODE (x))
8460 - exact_log2 (mask + 1)));
8465 /* If we are just looking for the sign bit, we don't need this shift at
8466 all, even if it has a variable count. */
8467 if (val_signbit_p (GET_MODE (x), mask))
8468 return force_to_mode (XEXP (x, 0), mode, mask, next_select);
8470 /* If this is a shift by a constant, get a mask that contains those bits
8471 that are not copies of the sign bit. We then have two cases: If
8472 MASK only includes those bits, this can be a logical shift, which may
8473 allow simplifications. If MASK is a single-bit field not within
8474 those bits, we are requesting a copy of the sign bit and hence can
8475 shift the sign bit to the appropriate location. */
8477 if (CONST_INT_P (XEXP (x, 1)) && INTVAL (XEXP (x, 1)) >= 0
8478 && INTVAL (XEXP (x, 1)) < HOST_BITS_PER_WIDE_INT)
8482 /* If the considered data is wider than HOST_WIDE_INT, we can't
8483 represent a mask for all its bits in a single scalar.
8484 But we only care about the lower bits, so calculate these. */
8486 if (GET_MODE_PRECISION (GET_MODE (x)) > HOST_BITS_PER_WIDE_INT)
8488 nonzero = ~(unsigned HOST_WIDE_INT) 0;
8490 /* GET_MODE_PRECISION (GET_MODE (x)) - INTVAL (XEXP (x, 1))
8491 is the number of bits a full-width mask would have set.
8492 We need only shift if these are fewer than nonzero can
8493 hold. If not, we must keep all bits set in nonzero. */
8495 if (GET_MODE_PRECISION (GET_MODE (x)) - INTVAL (XEXP (x, 1))
8496 < HOST_BITS_PER_WIDE_INT)
8497 nonzero >>= INTVAL (XEXP (x, 1))
8498 + HOST_BITS_PER_WIDE_INT
8499 - GET_MODE_PRECISION (GET_MODE (x)) ;
8503 nonzero = GET_MODE_MASK (GET_MODE (x));
8504 nonzero >>= INTVAL (XEXP (x, 1));
8507 if ((mask & ~nonzero) == 0)
8509 x = simplify_shift_const (NULL_RTX, LSHIFTRT, GET_MODE (x),
8510 XEXP (x, 0), INTVAL (XEXP (x, 1)));
8511 if (GET_CODE (x) != ASHIFTRT)
8512 return force_to_mode (x, mode, mask, next_select);
8515 else if ((i = exact_log2 (mask)) >= 0)
8517 x = simplify_shift_const
8518 (NULL_RTX, LSHIFTRT, GET_MODE (x), XEXP (x, 0),
8519 GET_MODE_PRECISION (GET_MODE (x)) - 1 - i);
8521 if (GET_CODE (x) != ASHIFTRT)
8522 return force_to_mode (x, mode, mask, next_select);
8526 /* If MASK is 1, convert this to an LSHIFTRT. This can be done
8527 even if the shift count isn't a constant. */
8529 x = simplify_gen_binary (LSHIFTRT, GET_MODE (x),
8530 XEXP (x, 0), XEXP (x, 1));
8534 /* If this is a zero- or sign-extension operation that just affects bits
8535 we don't care about, remove it. Be sure the call above returned
8536 something that is still a shift. */
8538 if ((GET_CODE (x) == LSHIFTRT || GET_CODE (x) == ASHIFTRT)
8539 && CONST_INT_P (XEXP (x, 1))
8540 && INTVAL (XEXP (x, 1)) >= 0
8541 && (INTVAL (XEXP (x, 1))
8542 <= GET_MODE_PRECISION (GET_MODE (x)) - (floor_log2 (mask) + 1))
8543 && GET_CODE (XEXP (x, 0)) == ASHIFT
8544 && XEXP (XEXP (x, 0), 1) == XEXP (x, 1))
8545 return force_to_mode (XEXP (XEXP (x, 0), 0), mode, mask,
8552 /* If the shift count is constant and we can do computations
8553 in the mode of X, compute where the bits we care about are.
8554 Otherwise, we can't do anything. Don't change the mode of
8555 the shift or propagate MODE into the shift, though. */
8556 if (CONST_INT_P (XEXP (x, 1))
8557 && INTVAL (XEXP (x, 1)) >= 0)
8559 temp = simplify_binary_operation (code == ROTATE ? ROTATERT : ROTATE,
8560 GET_MODE (x), GEN_INT (mask),
8562 if (temp && CONST_INT_P (temp))
8564 force_to_mode (XEXP (x, 0), GET_MODE (x),
8565 INTVAL (temp), next_select));
8570 /* If we just want the low-order bit, the NEG isn't needed since it
8571 won't change the low-order bit. */
8573 return force_to_mode (XEXP (x, 0), mode, mask, just_select);
8575 /* We need any bits less significant than the most significant bit in
8576 MASK since carries from those bits will affect the bits we are
8582 /* (not FOO) is (xor FOO CONST), so if FOO is an LSHIFTRT, we can do the
8583 same as the XOR case above. Ensure that the constant we form is not
8584 wider than the mode of X. */
8586 if (GET_CODE (XEXP (x, 0)) == LSHIFTRT
8587 && CONST_INT_P (XEXP (XEXP (x, 0), 1))
8588 && INTVAL (XEXP (XEXP (x, 0), 1)) >= 0
8589 && (INTVAL (XEXP (XEXP (x, 0), 1)) + floor_log2 (mask)
8590 < GET_MODE_PRECISION (GET_MODE (x)))
8591 && INTVAL (XEXP (XEXP (x, 0), 1)) < HOST_BITS_PER_WIDE_INT)
8593 temp = gen_int_mode (mask << INTVAL (XEXP (XEXP (x, 0), 1)),
8595 temp = simplify_gen_binary (XOR, GET_MODE (x),
8596 XEXP (XEXP (x, 0), 0), temp);
8597 x = simplify_gen_binary (LSHIFTRT, GET_MODE (x),
8598 temp, XEXP (XEXP (x, 0), 1));
8600 return force_to_mode (x, mode, mask, next_select);
8603 /* (and (not FOO) CONST) is (not (or FOO (not CONST))), so we must
8604 use the full mask inside the NOT. */
8608 op0 = gen_lowpart_or_truncate (op_mode,
8609 force_to_mode (XEXP (x, 0), mode, mask,
8611 if (op_mode != GET_MODE (x) || op0 != XEXP (x, 0))
8612 x = simplify_gen_unary (code, op_mode, op0, op_mode);
8616 /* (and (ne FOO 0) CONST) can be (and FOO CONST) if CONST is included
8617 in STORE_FLAG_VALUE and FOO has a single bit that might be nonzero,
8618 which is equal to STORE_FLAG_VALUE. */
8619 if ((mask & ~STORE_FLAG_VALUE) == 0
8620 && XEXP (x, 1) == const0_rtx
8621 && GET_MODE (XEXP (x, 0)) == mode
8622 && exact_log2 (nonzero_bits (XEXP (x, 0), mode)) >= 0
8623 && (nonzero_bits (XEXP (x, 0), mode)
8624 == (unsigned HOST_WIDE_INT) STORE_FLAG_VALUE))
8625 return force_to_mode (XEXP (x, 0), mode, mask, next_select);
8630 /* We have no way of knowing if the IF_THEN_ELSE can itself be
8631 written in a narrower mode. We play it safe and do not do so. */
8634 gen_lowpart_or_truncate (GET_MODE (x),
8635 force_to_mode (XEXP (x, 1), mode,
8636 mask, next_select)));
8638 gen_lowpart_or_truncate (GET_MODE (x),
8639 force_to_mode (XEXP (x, 2), mode,
8640 mask, next_select)));
8647 /* Ensure we return a value of the proper mode. */
8648 return gen_lowpart_or_truncate (mode, x);
8651 /* Return nonzero if X is an expression that has one of two values depending on
8652 whether some other value is zero or nonzero. In that case, we return the
8653 value that is being tested, *PTRUE is set to the value if the rtx being
8654 returned has a nonzero value, and *PFALSE is set to the other alternative.
8656 If we return zero, we set *PTRUE and *PFALSE to X. */
8659 if_then_else_cond (rtx x, rtx *ptrue, rtx *pfalse)
8661 enum machine_mode mode = GET_MODE (x);
8662 enum rtx_code code = GET_CODE (x);
8663 rtx cond0, cond1, true0, true1, false0, false1;
8664 unsigned HOST_WIDE_INT nz;
8666 /* If we are comparing a value against zero, we are done. */
8667 if ((code == NE || code == EQ)
8668 && XEXP (x, 1) == const0_rtx)
8670 *ptrue = (code == NE) ? const_true_rtx : const0_rtx;
8671 *pfalse = (code == NE) ? const0_rtx : const_true_rtx;
8675 /* If this is a unary operation whose operand has one of two values, apply
8676 our opcode to compute those values. */
8677 else if (UNARY_P (x)
8678 && (cond0 = if_then_else_cond (XEXP (x, 0), &true0, &false0)) != 0)
8680 *ptrue = simplify_gen_unary (code, mode, true0, GET_MODE (XEXP (x, 0)));
8681 *pfalse = simplify_gen_unary (code, mode, false0,
8682 GET_MODE (XEXP (x, 0)));
8686 /* If this is a COMPARE, do nothing, since the IF_THEN_ELSE we would
8687 make can't possibly match and would suppress other optimizations. */
8688 else if (code == COMPARE)
8691 /* If this is a binary operation, see if either side has only one of two
8692 values. If either one does or if both do and they are conditional on
8693 the same value, compute the new true and false values. */
8694 else if (BINARY_P (x))
8696 cond0 = if_then_else_cond (XEXP (x, 0), &true0, &false0);
8697 cond1 = if_then_else_cond (XEXP (x, 1), &true1, &false1);
8699 if ((cond0 != 0 || cond1 != 0)
8700 && ! (cond0 != 0 && cond1 != 0 && ! rtx_equal_p (cond0, cond1)))
8702 /* If if_then_else_cond returned zero, then true/false are the
8703 same rtl. We must copy one of them to prevent invalid rtl
8706 true0 = copy_rtx (true0);
8707 else if (cond1 == 0)
8708 true1 = copy_rtx (true1);
8710 if (COMPARISON_P (x))
8712 *ptrue = simplify_gen_relational (code, mode, VOIDmode,
8714 *pfalse = simplify_gen_relational (code, mode, VOIDmode,
8719 *ptrue = simplify_gen_binary (code, mode, true0, true1);
8720 *pfalse = simplify_gen_binary (code, mode, false0, false1);
8723 return cond0 ? cond0 : cond1;
8726 /* See if we have PLUS, IOR, XOR, MINUS or UMAX, where one of the
8727 operands is zero when the other is nonzero, and vice-versa,
8728 and STORE_FLAG_VALUE is 1 or -1. */
8730 if ((STORE_FLAG_VALUE == 1 || STORE_FLAG_VALUE == -1)
8731 && (code == PLUS || code == IOR || code == XOR || code == MINUS
8733 && GET_CODE (XEXP (x, 0)) == MULT && GET_CODE (XEXP (x, 1)) == MULT)
8735 rtx op0 = XEXP (XEXP (x, 0), 1);
8736 rtx op1 = XEXP (XEXP (x, 1), 1);
8738 cond0 = XEXP (XEXP (x, 0), 0);
8739 cond1 = XEXP (XEXP (x, 1), 0);
8741 if (COMPARISON_P (cond0)
8742 && COMPARISON_P (cond1)
8743 && ((GET_CODE (cond0) == reversed_comparison_code (cond1, NULL)
8744 && rtx_equal_p (XEXP (cond0, 0), XEXP (cond1, 0))
8745 && rtx_equal_p (XEXP (cond0, 1), XEXP (cond1, 1)))
8746 || ((swap_condition (GET_CODE (cond0))
8747 == reversed_comparison_code (cond1, NULL))
8748 && rtx_equal_p (XEXP (cond0, 0), XEXP (cond1, 1))
8749 && rtx_equal_p (XEXP (cond0, 1), XEXP (cond1, 0))))
8750 && ! side_effects_p (x))
8752 *ptrue = simplify_gen_binary (MULT, mode, op0, const_true_rtx);
8753 *pfalse = simplify_gen_binary (MULT, mode,
8755 ? simplify_gen_unary (NEG, mode,
8763 /* Similarly for MULT, AND and UMIN, except that for these the result
8765 if ((STORE_FLAG_VALUE == 1 || STORE_FLAG_VALUE == -1)
8766 && (code == MULT || code == AND || code == UMIN)
8767 && GET_CODE (XEXP (x, 0)) == MULT && GET_CODE (XEXP (x, 1)) == MULT)
8769 cond0 = XEXP (XEXP (x, 0), 0);
8770 cond1 = XEXP (XEXP (x, 1), 0);
8772 if (COMPARISON_P (cond0)
8773 && COMPARISON_P (cond1)
8774 && ((GET_CODE (cond0) == reversed_comparison_code (cond1, NULL)
8775 && rtx_equal_p (XEXP (cond0, 0), XEXP (cond1, 0))
8776 && rtx_equal_p (XEXP (cond0, 1), XEXP (cond1, 1)))
8777 || ((swap_condition (GET_CODE (cond0))
8778 == reversed_comparison_code (cond1, NULL))
8779 && rtx_equal_p (XEXP (cond0, 0), XEXP (cond1, 1))
8780 && rtx_equal_p (XEXP (cond0, 1), XEXP (cond1, 0))))
8781 && ! side_effects_p (x))
8783 *ptrue = *pfalse = const0_rtx;
8789 else if (code == IF_THEN_ELSE)
8791 /* If we have IF_THEN_ELSE already, extract the condition and
8792 canonicalize it if it is NE or EQ. */
8793 cond0 = XEXP (x, 0);
8794 *ptrue = XEXP (x, 1), *pfalse = XEXP (x, 2);
8795 if (GET_CODE (cond0) == NE && XEXP (cond0, 1) == const0_rtx)
8796 return XEXP (cond0, 0);
8797 else if (GET_CODE (cond0) == EQ && XEXP (cond0, 1) == const0_rtx)
8799 *ptrue = XEXP (x, 2), *pfalse = XEXP (x, 1);
8800 return XEXP (cond0, 0);
8806 /* If X is a SUBREG, we can narrow both the true and false values
8807 if the inner expression, if there is a condition. */
8808 else if (code == SUBREG
8809 && 0 != (cond0 = if_then_else_cond (SUBREG_REG (x),
8812 true0 = simplify_gen_subreg (mode, true0,
8813 GET_MODE (SUBREG_REG (x)), SUBREG_BYTE (x));
8814 false0 = simplify_gen_subreg (mode, false0,
8815 GET_MODE (SUBREG_REG (x)), SUBREG_BYTE (x));
8816 if (true0 && false0)
8824 /* If X is a constant, this isn't special and will cause confusions
8825 if we treat it as such. Likewise if it is equivalent to a constant. */
8826 else if (CONSTANT_P (x)
8827 || ((cond0 = get_last_value (x)) != 0 && CONSTANT_P (cond0)))
8830 /* If we're in BImode, canonicalize on 0 and STORE_FLAG_VALUE, as that
8831 will be least confusing to the rest of the compiler. */
8832 else if (mode == BImode)
8834 *ptrue = GEN_INT (STORE_FLAG_VALUE), *pfalse = const0_rtx;
8838 /* If X is known to be either 0 or -1, those are the true and
8839 false values when testing X. */
8840 else if (x == constm1_rtx || x == const0_rtx
8841 || (mode != VOIDmode
8842 && num_sign_bit_copies (x, mode) == GET_MODE_PRECISION (mode)))
8844 *ptrue = constm1_rtx, *pfalse = const0_rtx;
8848 /* Likewise for 0 or a single bit. */
8849 else if (HWI_COMPUTABLE_MODE_P (mode)
8850 && exact_log2 (nz = nonzero_bits (x, mode)) >= 0)
8852 *ptrue = gen_int_mode (nz, mode), *pfalse = const0_rtx;
8856 /* Otherwise fail; show no condition with true and false values the same. */
8857 *ptrue = *pfalse = x;
8861 /* Return the value of expression X given the fact that condition COND
8862 is known to be true when applied to REG as its first operand and VAL
8863 as its second. X is known to not be shared and so can be modified in
8866 We only handle the simplest cases, and specifically those cases that
8867 arise with IF_THEN_ELSE expressions. */
8870 known_cond (rtx x, enum rtx_code cond, rtx reg, rtx val)
8872 enum rtx_code code = GET_CODE (x);
8877 if (side_effects_p (x))
8880 /* If either operand of the condition is a floating point value,
8881 then we have to avoid collapsing an EQ comparison. */
8883 && rtx_equal_p (x, reg)
8884 && ! FLOAT_MODE_P (GET_MODE (x))
8885 && ! FLOAT_MODE_P (GET_MODE (val)))
8888 if (cond == UNEQ && rtx_equal_p (x, reg))
8891 /* If X is (abs REG) and we know something about REG's relationship
8892 with zero, we may be able to simplify this. */
8894 if (code == ABS && rtx_equal_p (XEXP (x, 0), reg) && val == const0_rtx)
8897 case GE: case GT: case EQ:
8900 return simplify_gen_unary (NEG, GET_MODE (XEXP (x, 0)),
8902 GET_MODE (XEXP (x, 0)));
8907 /* The only other cases we handle are MIN, MAX, and comparisons if the
8908 operands are the same as REG and VAL. */
8910 else if (COMPARISON_P (x) || COMMUTATIVE_ARITH_P (x))
8912 if (rtx_equal_p (XEXP (x, 0), val))
8913 cond = swap_condition (cond), temp = val, val = reg, reg = temp;
8915 if (rtx_equal_p (XEXP (x, 0), reg) && rtx_equal_p (XEXP (x, 1), val))
8917 if (COMPARISON_P (x))
8919 if (comparison_dominates_p (cond, code))
8920 return const_true_rtx;
8922 code = reversed_comparison_code (x, NULL);
8924 && comparison_dominates_p (cond, code))
8929 else if (code == SMAX || code == SMIN
8930 || code == UMIN || code == UMAX)
8932 int unsignedp = (code == UMIN || code == UMAX);
8934 /* Do not reverse the condition when it is NE or EQ.
8935 This is because we cannot conclude anything about
8936 the value of 'SMAX (x, y)' when x is not equal to y,
8937 but we can when x equals y. */
8938 if ((code == SMAX || code == UMAX)
8939 && ! (cond == EQ || cond == NE))
8940 cond = reverse_condition (cond);
8945 return unsignedp ? x : XEXP (x, 1);
8947 return unsignedp ? x : XEXP (x, 0);
8949 return unsignedp ? XEXP (x, 1) : x;
8951 return unsignedp ? XEXP (x, 0) : x;
8958 else if (code == SUBREG)
8960 enum machine_mode inner_mode = GET_MODE (SUBREG_REG (x));
8961 rtx new_rtx, r = known_cond (SUBREG_REG (x), cond, reg, val);
8963 if (SUBREG_REG (x) != r)
8965 /* We must simplify subreg here, before we lose track of the
8966 original inner_mode. */
8967 new_rtx = simplify_subreg (GET_MODE (x), r,
8968 inner_mode, SUBREG_BYTE (x));
8972 SUBST (SUBREG_REG (x), r);
8977 /* We don't have to handle SIGN_EXTEND here, because even in the
8978 case of replacing something with a modeless CONST_INT, a
8979 CONST_INT is already (supposed to be) a valid sign extension for
8980 its narrower mode, which implies it's already properly
8981 sign-extended for the wider mode. Now, for ZERO_EXTEND, the
8982 story is different. */
8983 else if (code == ZERO_EXTEND)
8985 enum machine_mode inner_mode = GET_MODE (XEXP (x, 0));
8986 rtx new_rtx, r = known_cond (XEXP (x, 0), cond, reg, val);
8988 if (XEXP (x, 0) != r)
8990 /* We must simplify the zero_extend here, before we lose
8991 track of the original inner_mode. */
8992 new_rtx = simplify_unary_operation (ZERO_EXTEND, GET_MODE (x),
8997 SUBST (XEXP (x, 0), r);
9003 fmt = GET_RTX_FORMAT (code);
9004 for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
9007 SUBST (XEXP (x, i), known_cond (XEXP (x, i), cond, reg, val));
9008 else if (fmt[i] == 'E')
9009 for (j = XVECLEN (x, i) - 1; j >= 0; j--)
9010 SUBST (XVECEXP (x, i, j), known_cond (XVECEXP (x, i, j),
9017 /* See if X and Y are equal for the purposes of seeing if we can rewrite an
9018 assignment as a field assignment. */
9021 rtx_equal_for_field_assignment_p (rtx x, rtx y)
9023 if (x == y || rtx_equal_p (x, y))
9026 if (x == 0 || y == 0 || GET_MODE (x) != GET_MODE (y))
9029 /* Check for a paradoxical SUBREG of a MEM compared with the MEM.
9030 Note that all SUBREGs of MEM are paradoxical; otherwise they
9031 would have been rewritten. */
9032 if (MEM_P (x) && GET_CODE (y) == SUBREG
9033 && MEM_P (SUBREG_REG (y))
9034 && rtx_equal_p (SUBREG_REG (y),
9035 gen_lowpart (GET_MODE (SUBREG_REG (y)), x)))
9038 if (MEM_P (y) && GET_CODE (x) == SUBREG
9039 && MEM_P (SUBREG_REG (x))
9040 && rtx_equal_p (SUBREG_REG (x),
9041 gen_lowpart (GET_MODE (SUBREG_REG (x)), y)))
9044 /* We used to see if get_last_value of X and Y were the same but that's
9045 not correct. In one direction, we'll cause the assignment to have
9046 the wrong destination and in the case, we'll import a register into this
9047 insn that might have already have been dead. So fail if none of the
9048 above cases are true. */
9052 /* See if X, a SET operation, can be rewritten as a bit-field assignment.
9053 Return that assignment if so.
9055 We only handle the most common cases. */
9058 make_field_assignment (rtx x)
9060 rtx dest = SET_DEST (x);
9061 rtx src = SET_SRC (x);
9066 unsigned HOST_WIDE_INT len;
9068 enum machine_mode mode;
9070 /* If SRC was (and (not (ashift (const_int 1) POS)) DEST), this is
9071 a clear of a one-bit field. We will have changed it to
9072 (and (rotate (const_int -2) POS) DEST), so check for that. Also check
9075 if (GET_CODE (src) == AND && GET_CODE (XEXP (src, 0)) == ROTATE
9076 && CONST_INT_P (XEXP (XEXP (src, 0), 0))
9077 && INTVAL (XEXP (XEXP (src, 0), 0)) == -2
9078 && rtx_equal_for_field_assignment_p (dest, XEXP (src, 1)))
9080 assign = make_extraction (VOIDmode, dest, 0, XEXP (XEXP (src, 0), 1),
9083 return gen_rtx_SET (VOIDmode, assign, const0_rtx);
9087 if (GET_CODE (src) == AND && GET_CODE (XEXP (src, 0)) == SUBREG
9088 && subreg_lowpart_p (XEXP (src, 0))
9089 && (GET_MODE_SIZE (GET_MODE (XEXP (src, 0)))
9090 < GET_MODE_SIZE (GET_MODE (SUBREG_REG (XEXP (src, 0)))))
9091 && GET_CODE (SUBREG_REG (XEXP (src, 0))) == ROTATE
9092 && CONST_INT_P (XEXP (SUBREG_REG (XEXP (src, 0)), 0))
9093 && INTVAL (XEXP (SUBREG_REG (XEXP (src, 0)), 0)) == -2
9094 && rtx_equal_for_field_assignment_p (dest, XEXP (src, 1)))
9096 assign = make_extraction (VOIDmode, dest, 0,
9097 XEXP (SUBREG_REG (XEXP (src, 0)), 1),
9100 return gen_rtx_SET (VOIDmode, assign, const0_rtx);
9104 /* If SRC is (ior (ashift (const_int 1) POS) DEST), this is a set of a
9106 if (GET_CODE (src) == IOR && GET_CODE (XEXP (src, 0)) == ASHIFT
9107 && XEXP (XEXP (src, 0), 0) == const1_rtx
9108 && rtx_equal_for_field_assignment_p (dest, XEXP (src, 1)))
9110 assign = make_extraction (VOIDmode, dest, 0, XEXP (XEXP (src, 0), 1),
9113 return gen_rtx_SET (VOIDmode, assign, const1_rtx);
9117 /* If DEST is already a field assignment, i.e. ZERO_EXTRACT, and the
9118 SRC is an AND with all bits of that field set, then we can discard
9120 if (GET_CODE (dest) == ZERO_EXTRACT
9121 && CONST_INT_P (XEXP (dest, 1))
9122 && GET_CODE (src) == AND
9123 && CONST_INT_P (XEXP (src, 1)))
9125 HOST_WIDE_INT width = INTVAL (XEXP (dest, 1));
9126 unsigned HOST_WIDE_INT and_mask = INTVAL (XEXP (src, 1));
9127 unsigned HOST_WIDE_INT ze_mask;
9129 if (width >= HOST_BITS_PER_WIDE_INT)
9132 ze_mask = ((unsigned HOST_WIDE_INT)1 << width) - 1;
9134 /* Complete overlap. We can remove the source AND. */
9135 if ((and_mask & ze_mask) == ze_mask)
9136 return gen_rtx_SET (VOIDmode, dest, XEXP (src, 0));
9138 /* Partial overlap. We can reduce the source AND. */
9139 if ((and_mask & ze_mask) != and_mask)
9141 mode = GET_MODE (src);
9142 src = gen_rtx_AND (mode, XEXP (src, 0),
9143 gen_int_mode (and_mask & ze_mask, mode));
9144 return gen_rtx_SET (VOIDmode, dest, src);
9148 /* The other case we handle is assignments into a constant-position
9149 field. They look like (ior/xor (and DEST C1) OTHER). If C1 represents
9150 a mask that has all one bits except for a group of zero bits and
9151 OTHER is known to have zeros where C1 has ones, this is such an
9152 assignment. Compute the position and length from C1. Shift OTHER
9153 to the appropriate position, force it to the required mode, and
9154 make the extraction. Check for the AND in both operands. */
9156 if (GET_CODE (src) != IOR && GET_CODE (src) != XOR)
9159 rhs = expand_compound_operation (XEXP (src, 0));
9160 lhs = expand_compound_operation (XEXP (src, 1));
9162 if (GET_CODE (rhs) == AND
9163 && CONST_INT_P (XEXP (rhs, 1))
9164 && rtx_equal_for_field_assignment_p (XEXP (rhs, 0), dest))
9165 c1 = INTVAL (XEXP (rhs, 1)), other = lhs;
9166 else if (GET_CODE (lhs) == AND
9167 && CONST_INT_P (XEXP (lhs, 1))
9168 && rtx_equal_for_field_assignment_p (XEXP (lhs, 0), dest))
9169 c1 = INTVAL (XEXP (lhs, 1)), other = rhs;
9173 pos = get_pos_from_mask ((~c1) & GET_MODE_MASK (GET_MODE (dest)), &len);
9174 if (pos < 0 || pos + len > GET_MODE_PRECISION (GET_MODE (dest))
9175 || GET_MODE_PRECISION (GET_MODE (dest)) > HOST_BITS_PER_WIDE_INT
9176 || (c1 & nonzero_bits (other, GET_MODE (dest))) != 0)
9179 assign = make_extraction (VOIDmode, dest, pos, NULL_RTX, len, 1, 1, 0);
9183 /* The mode to use for the source is the mode of the assignment, or of
9184 what is inside a possible STRICT_LOW_PART. */
9185 mode = (GET_CODE (assign) == STRICT_LOW_PART
9186 ? GET_MODE (XEXP (assign, 0)) : GET_MODE (assign));
9188 /* Shift OTHER right POS places and make it the source, restricting it
9189 to the proper length and mode. */
9191 src = canon_reg_for_combine (simplify_shift_const (NULL_RTX, LSHIFTRT,
9195 src = force_to_mode (src, mode,
9196 GET_MODE_PRECISION (mode) >= HOST_BITS_PER_WIDE_INT
9197 ? ~(unsigned HOST_WIDE_INT) 0
9198 : ((unsigned HOST_WIDE_INT) 1 << len) - 1,
9201 /* If SRC is masked by an AND that does not make a difference in
9202 the value being stored, strip it. */
9203 if (GET_CODE (assign) == ZERO_EXTRACT
9204 && CONST_INT_P (XEXP (assign, 1))
9205 && INTVAL (XEXP (assign, 1)) < HOST_BITS_PER_WIDE_INT
9206 && GET_CODE (src) == AND
9207 && CONST_INT_P (XEXP (src, 1))
9208 && UINTVAL (XEXP (src, 1))
9209 == ((unsigned HOST_WIDE_INT) 1 << INTVAL (XEXP (assign, 1))) - 1)
9210 src = XEXP (src, 0);
9212 return gen_rtx_SET (VOIDmode, assign, src);
9215 /* See if X is of the form (+ (* a c) (* b c)) and convert to (* (+ a b) c)
9219 apply_distributive_law (rtx x)
9221 enum rtx_code code = GET_CODE (x);
9222 enum rtx_code inner_code;
9223 rtx lhs, rhs, other;
9226 /* Distributivity is not true for floating point as it can change the
9227 value. So we don't do it unless -funsafe-math-optimizations. */
9228 if (FLOAT_MODE_P (GET_MODE (x))
9229 && ! flag_unsafe_math_optimizations)
9232 /* The outer operation can only be one of the following: */
9233 if (code != IOR && code != AND && code != XOR
9234 && code != PLUS && code != MINUS)
9240 /* If either operand is a primitive we can't do anything, so get out
9242 if (OBJECT_P (lhs) || OBJECT_P (rhs))
9245 lhs = expand_compound_operation (lhs);
9246 rhs = expand_compound_operation (rhs);
9247 inner_code = GET_CODE (lhs);
9248 if (inner_code != GET_CODE (rhs))
9251 /* See if the inner and outer operations distribute. */
9258 /* These all distribute except over PLUS. */
9259 if (code == PLUS || code == MINUS)
9264 if (code != PLUS && code != MINUS)
9269 /* This is also a multiply, so it distributes over everything. */
9273 /* Non-paradoxical SUBREGs distributes over all operations,
9274 provided the inner modes and byte offsets are the same, this
9275 is an extraction of a low-order part, we don't convert an fp
9276 operation to int or vice versa, this is not a vector mode,
9277 and we would not be converting a single-word operation into a
9278 multi-word operation. The latter test is not required, but
9279 it prevents generating unneeded multi-word operations. Some
9280 of the previous tests are redundant given the latter test,
9281 but are retained because they are required for correctness.
9283 We produce the result slightly differently in this case. */
9285 if (GET_MODE (SUBREG_REG (lhs)) != GET_MODE (SUBREG_REG (rhs))
9286 || SUBREG_BYTE (lhs) != SUBREG_BYTE (rhs)
9287 || ! subreg_lowpart_p (lhs)
9288 || (GET_MODE_CLASS (GET_MODE (lhs))
9289 != GET_MODE_CLASS (GET_MODE (SUBREG_REG (lhs))))
9290 || paradoxical_subreg_p (lhs)
9291 || VECTOR_MODE_P (GET_MODE (lhs))
9292 || GET_MODE_SIZE (GET_MODE (SUBREG_REG (lhs))) > UNITS_PER_WORD
9293 /* Result might need to be truncated. Don't change mode if
9294 explicit truncation is needed. */
9295 || !TRULY_NOOP_TRUNCATION_MODES_P (GET_MODE (x),
9296 GET_MODE (SUBREG_REG (lhs))))
9299 tem = simplify_gen_binary (code, GET_MODE (SUBREG_REG (lhs)),
9300 SUBREG_REG (lhs), SUBREG_REG (rhs));
9301 return gen_lowpart (GET_MODE (x), tem);
9307 /* Set LHS and RHS to the inner operands (A and B in the example
9308 above) and set OTHER to the common operand (C in the example).
9309 There is only one way to do this unless the inner operation is
9311 if (COMMUTATIVE_ARITH_P (lhs)
9312 && rtx_equal_p (XEXP (lhs, 0), XEXP (rhs, 0)))
9313 other = XEXP (lhs, 0), lhs = XEXP (lhs, 1), rhs = XEXP (rhs, 1);
9314 else if (COMMUTATIVE_ARITH_P (lhs)
9315 && rtx_equal_p (XEXP (lhs, 0), XEXP (rhs, 1)))
9316 other = XEXP (lhs, 0), lhs = XEXP (lhs, 1), rhs = XEXP (rhs, 0);
9317 else if (COMMUTATIVE_ARITH_P (lhs)
9318 && rtx_equal_p (XEXP (lhs, 1), XEXP (rhs, 0)))
9319 other = XEXP (lhs, 1), lhs = XEXP (lhs, 0), rhs = XEXP (rhs, 1);
9320 else if (rtx_equal_p (XEXP (lhs, 1), XEXP (rhs, 1)))
9321 other = XEXP (lhs, 1), lhs = XEXP (lhs, 0), rhs = XEXP (rhs, 0);
9325 /* Form the new inner operation, seeing if it simplifies first. */
9326 tem = simplify_gen_binary (code, GET_MODE (x), lhs, rhs);
9328 /* There is one exception to the general way of distributing:
9329 (a | c) ^ (b | c) -> (a ^ b) & ~c */
9330 if (code == XOR && inner_code == IOR)
9333 other = simplify_gen_unary (NOT, GET_MODE (x), other, GET_MODE (x));
9336 /* We may be able to continuing distributing the result, so call
9337 ourselves recursively on the inner operation before forming the
9338 outer operation, which we return. */
9339 return simplify_gen_binary (inner_code, GET_MODE (x),
9340 apply_distributive_law (tem), other);
9343 /* See if X is of the form (* (+ A B) C), and if so convert to
9344 (+ (* A C) (* B C)) and try to simplify.
9346 Most of the time, this results in no change. However, if some of
9347 the operands are the same or inverses of each other, simplifications
9350 For example, (and (ior A B) (not B)) can occur as the result of
9351 expanding a bit field assignment. When we apply the distributive
9352 law to this, we get (ior (and (A (not B))) (and (B (not B)))),
9353 which then simplifies to (and (A (not B))).
9355 Note that no checks happen on the validity of applying the inverse
9356 distributive law. This is pointless since we can do it in the
9357 few places where this routine is called.
9359 N is the index of the term that is decomposed (the arithmetic operation,
9360 i.e. (+ A B) in the first example above). !N is the index of the term that
9361 is distributed, i.e. of C in the first example above. */
9363 distribute_and_simplify_rtx (rtx x, int n)
9365 enum machine_mode mode;
9366 enum rtx_code outer_code, inner_code;
9367 rtx decomposed, distributed, inner_op0, inner_op1, new_op0, new_op1, tmp;
9369 /* Distributivity is not true for floating point as it can change the
9370 value. So we don't do it unless -funsafe-math-optimizations. */
9371 if (FLOAT_MODE_P (GET_MODE (x))
9372 && ! flag_unsafe_math_optimizations)
9375 decomposed = XEXP (x, n);
9376 if (!ARITHMETIC_P (decomposed))
9379 mode = GET_MODE (x);
9380 outer_code = GET_CODE (x);
9381 distributed = XEXP (x, !n);
9383 inner_code = GET_CODE (decomposed);
9384 inner_op0 = XEXP (decomposed, 0);
9385 inner_op1 = XEXP (decomposed, 1);
9387 /* Special case (and (xor B C) (not A)), which is equivalent to
9388 (xor (ior A B) (ior A C)) */
9389 if (outer_code == AND && inner_code == XOR && GET_CODE (distributed) == NOT)
9391 distributed = XEXP (distributed, 0);
9397 /* Distribute the second term. */
9398 new_op0 = simplify_gen_binary (outer_code, mode, inner_op0, distributed);
9399 new_op1 = simplify_gen_binary (outer_code, mode, inner_op1, distributed);
9403 /* Distribute the first term. */
9404 new_op0 = simplify_gen_binary (outer_code, mode, distributed, inner_op0);
9405 new_op1 = simplify_gen_binary (outer_code, mode, distributed, inner_op1);
9408 tmp = apply_distributive_law (simplify_gen_binary (inner_code, mode,
9410 if (GET_CODE (tmp) != outer_code
9411 && (set_src_cost (tmp, optimize_this_for_speed_p)
9412 < set_src_cost (x, optimize_this_for_speed_p)))
9418 /* Simplify a logical `and' of VAROP with the constant CONSTOP, to be done
9419 in MODE. Return an equivalent form, if different from (and VAROP
9420 (const_int CONSTOP)). Otherwise, return NULL_RTX. */
9423 simplify_and_const_int_1 (enum machine_mode mode, rtx varop,
9424 unsigned HOST_WIDE_INT constop)
9426 unsigned HOST_WIDE_INT nonzero;
9427 unsigned HOST_WIDE_INT orig_constop;
9432 orig_constop = constop;
9433 if (GET_CODE (varop) == CLOBBER)
9436 /* Simplify VAROP knowing that we will be only looking at some of the
9439 Note by passing in CONSTOP, we guarantee that the bits not set in
9440 CONSTOP are not significant and will never be examined. We must
9441 ensure that is the case by explicitly masking out those bits
9442 before returning. */
9443 varop = force_to_mode (varop, mode, constop, 0);
9445 /* If VAROP is a CLOBBER, we will fail so return it. */
9446 if (GET_CODE (varop) == CLOBBER)
9449 /* If VAROP is a CONST_INT, then we need to apply the mask in CONSTOP
9450 to VAROP and return the new constant. */
9451 if (CONST_INT_P (varop))
9452 return gen_int_mode (INTVAL (varop) & constop, mode);
9454 /* See what bits may be nonzero in VAROP. Unlike the general case of
9455 a call to nonzero_bits, here we don't care about bits outside
9458 nonzero = nonzero_bits (varop, mode) & GET_MODE_MASK (mode);
9460 /* Turn off all bits in the constant that are known to already be zero.
9461 Thus, if the AND isn't needed at all, we will have CONSTOP == NONZERO_BITS
9462 which is tested below. */
9466 /* If we don't have any bits left, return zero. */
9470 /* If VAROP is a NEG of something known to be zero or 1 and CONSTOP is
9471 a power of two, we can replace this with an ASHIFT. */
9472 if (GET_CODE (varop) == NEG && nonzero_bits (XEXP (varop, 0), mode) == 1
9473 && (i = exact_log2 (constop)) >= 0)
9474 return simplify_shift_const (NULL_RTX, ASHIFT, mode, XEXP (varop, 0), i);
9476 /* If VAROP is an IOR or XOR, apply the AND to both branches of the IOR
9477 or XOR, then try to apply the distributive law. This may eliminate
9478 operations if either branch can be simplified because of the AND.
9479 It may also make some cases more complex, but those cases probably
9480 won't match a pattern either with or without this. */
9482 if (GET_CODE (varop) == IOR || GET_CODE (varop) == XOR)
9486 apply_distributive_law
9487 (simplify_gen_binary (GET_CODE (varop), GET_MODE (varop),
9488 simplify_and_const_int (NULL_RTX,
9492 simplify_and_const_int (NULL_RTX,
9497 /* If VAROP is PLUS, and the constant is a mask of low bits, distribute
9498 the AND and see if one of the operands simplifies to zero. If so, we
9499 may eliminate it. */
9501 if (GET_CODE (varop) == PLUS
9502 && exact_log2 (constop + 1) >= 0)
9506 o0 = simplify_and_const_int (NULL_RTX, mode, XEXP (varop, 0), constop);
9507 o1 = simplify_and_const_int (NULL_RTX, mode, XEXP (varop, 1), constop);
9508 if (o0 == const0_rtx)
9510 if (o1 == const0_rtx)
9514 /* Make a SUBREG if necessary. If we can't make it, fail. */
9515 varop = gen_lowpart (mode, varop);
9516 if (varop == NULL_RTX || GET_CODE (varop) == CLOBBER)
9519 /* If we are only masking insignificant bits, return VAROP. */
9520 if (constop == nonzero)
9523 if (varop == orig_varop && constop == orig_constop)
9526 /* Otherwise, return an AND. */
9527 return simplify_gen_binary (AND, mode, varop, gen_int_mode (constop, mode));
9531 /* We have X, a logical `and' of VAROP with the constant CONSTOP, to be done
9534 Return an equivalent form, if different from X. Otherwise, return X. If
9535 X is zero, we are to always construct the equivalent form. */
9538 simplify_and_const_int (rtx x, enum machine_mode mode, rtx varop,
9539 unsigned HOST_WIDE_INT constop)
9541 rtx tem = simplify_and_const_int_1 (mode, varop, constop);
9546 x = simplify_gen_binary (AND, GET_MODE (varop), varop,
9547 gen_int_mode (constop, mode));
9548 if (GET_MODE (x) != mode)
9549 x = gen_lowpart (mode, x);
9553 /* Given a REG, X, compute which bits in X can be nonzero.
9554 We don't care about bits outside of those defined in MODE.
9556 For most X this is simply GET_MODE_MASK (GET_MODE (MODE)), but if X is
9557 a shift, AND, or zero_extract, we can do better. */
9560 reg_nonzero_bits_for_combine (const_rtx x, enum machine_mode mode,
9561 const_rtx known_x ATTRIBUTE_UNUSED,
9562 enum machine_mode known_mode ATTRIBUTE_UNUSED,
9563 unsigned HOST_WIDE_INT known_ret ATTRIBUTE_UNUSED,
9564 unsigned HOST_WIDE_INT *nonzero)
9569 /* If X is a register whose nonzero bits value is current, use it.
9570 Otherwise, if X is a register whose value we can find, use that
9571 value. Otherwise, use the previously-computed global nonzero bits
9572 for this register. */
9574 rsp = VEC_index (reg_stat_type, reg_stat, REGNO (x));
9575 if (rsp->last_set_value != 0
9576 && (rsp->last_set_mode == mode
9577 || (GET_MODE_CLASS (rsp->last_set_mode) == MODE_INT
9578 && GET_MODE_CLASS (mode) == MODE_INT))
9579 && ((rsp->last_set_label >= label_tick_ebb_start
9580 && rsp->last_set_label < label_tick)
9581 || (rsp->last_set_label == label_tick
9582 && DF_INSN_LUID (rsp->last_set) < subst_low_luid)
9583 || (REGNO (x) >= FIRST_PSEUDO_REGISTER
9584 && REG_N_SETS (REGNO (x)) == 1
9586 (DF_LR_IN (ENTRY_BLOCK_PTR->next_bb), REGNO (x)))))
9588 *nonzero &= rsp->last_set_nonzero_bits;
9592 tem = get_last_value (x);
9596 #ifdef SHORT_IMMEDIATES_SIGN_EXTEND
9597 /* If X is narrower than MODE and TEM is a non-negative
9598 constant that would appear negative in the mode of X,
9599 sign-extend it for use in reg_nonzero_bits because some
9600 machines (maybe most) will actually do the sign-extension
9601 and this is the conservative approach.
9603 ??? For 2.5, try to tighten up the MD files in this regard
9604 instead of this kludge. */
9606 if (GET_MODE_PRECISION (GET_MODE (x)) < GET_MODE_PRECISION (mode)
9607 && CONST_INT_P (tem)
9609 && val_signbit_known_set_p (GET_MODE (x), INTVAL (tem)))
9610 tem = GEN_INT (INTVAL (tem) | ~GET_MODE_MASK (GET_MODE (x)));
9614 else if (nonzero_sign_valid && rsp->nonzero_bits)
9616 unsigned HOST_WIDE_INT mask = rsp->nonzero_bits;
9618 if (GET_MODE_PRECISION (GET_MODE (x)) < GET_MODE_PRECISION (mode))
9619 /* We don't know anything about the upper bits. */
9620 mask |= GET_MODE_MASK (mode) ^ GET_MODE_MASK (GET_MODE (x));
9627 /* Return the number of bits at the high-order end of X that are known to
9628 be equal to the sign bit. X will be used in mode MODE; if MODE is
9629 VOIDmode, X will be used in its own mode. The returned value will always
9630 be between 1 and the number of bits in MODE. */
9633 reg_num_sign_bit_copies_for_combine (const_rtx x, enum machine_mode mode,
9634 const_rtx known_x ATTRIBUTE_UNUSED,
9635 enum machine_mode known_mode
9637 unsigned int known_ret ATTRIBUTE_UNUSED,
9638 unsigned int *result)
9643 rsp = VEC_index (reg_stat_type, reg_stat, REGNO (x));
9644 if (rsp->last_set_value != 0
9645 && rsp->last_set_mode == mode
9646 && ((rsp->last_set_label >= label_tick_ebb_start
9647 && rsp->last_set_label < label_tick)
9648 || (rsp->last_set_label == label_tick
9649 && DF_INSN_LUID (rsp->last_set) < subst_low_luid)
9650 || (REGNO (x) >= FIRST_PSEUDO_REGISTER
9651 && REG_N_SETS (REGNO (x)) == 1
9653 (DF_LR_IN (ENTRY_BLOCK_PTR->next_bb), REGNO (x)))))
9655 *result = rsp->last_set_sign_bit_copies;
9659 tem = get_last_value (x);
9663 if (nonzero_sign_valid && rsp->sign_bit_copies != 0
9664 && GET_MODE_PRECISION (GET_MODE (x)) == GET_MODE_PRECISION (mode))
9665 *result = rsp->sign_bit_copies;
9670 /* Return the number of "extended" bits there are in X, when interpreted
9671 as a quantity in MODE whose signedness is indicated by UNSIGNEDP. For
9672 unsigned quantities, this is the number of high-order zero bits.
9673 For signed quantities, this is the number of copies of the sign bit
9674 minus 1. In both case, this function returns the number of "spare"
9675 bits. For example, if two quantities for which this function returns
9676 at least 1 are added, the addition is known not to overflow.
9678 This function will always return 0 unless called during combine, which
9679 implies that it must be called from a define_split. */
9682 extended_count (const_rtx x, enum machine_mode mode, int unsignedp)
9684 if (nonzero_sign_valid == 0)
9688 ? (HWI_COMPUTABLE_MODE_P (mode)
9689 ? (unsigned int) (GET_MODE_PRECISION (mode) - 1
9690 - floor_log2 (nonzero_bits (x, mode)))
9692 : num_sign_bit_copies (x, mode) - 1);
9695 /* This function is called from `simplify_shift_const' to merge two
9696 outer operations. Specifically, we have already found that we need
9697 to perform operation *POP0 with constant *PCONST0 at the outermost
9698 position. We would now like to also perform OP1 with constant CONST1
9699 (with *POP0 being done last).
9701 Return 1 if we can do the operation and update *POP0 and *PCONST0 with
9702 the resulting operation. *PCOMP_P is set to 1 if we would need to
9703 complement the innermost operand, otherwise it is unchanged.
9705 MODE is the mode in which the operation will be done. No bits outside
9706 the width of this mode matter. It is assumed that the width of this mode
9707 is smaller than or equal to HOST_BITS_PER_WIDE_INT.
9709 If *POP0 or OP1 are UNKNOWN, it means no operation is required. Only NEG, PLUS,
9710 IOR, XOR, and AND are supported. We may set *POP0 to SET if the proper
9711 result is simply *PCONST0.
9713 If the resulting operation cannot be expressed as one operation, we
9714 return 0 and do not change *POP0, *PCONST0, and *PCOMP_P. */
9717 merge_outer_ops (enum rtx_code *pop0, HOST_WIDE_INT *pconst0, enum rtx_code op1, HOST_WIDE_INT const1, enum machine_mode mode, int *pcomp_p)
9719 enum rtx_code op0 = *pop0;
9720 HOST_WIDE_INT const0 = *pconst0;
9722 const0 &= GET_MODE_MASK (mode);
9723 const1 &= GET_MODE_MASK (mode);
9725 /* If OP0 is an AND, clear unimportant bits in CONST1. */
9729 /* If OP0 or OP1 is UNKNOWN, this is easy. Similarly if they are the same or
9732 if (op1 == UNKNOWN || op0 == SET)
9735 else if (op0 == UNKNOWN)
9736 op0 = op1, const0 = const1;
9738 else if (op0 == op1)
9762 /* Otherwise, if either is a PLUS or NEG, we can't do anything. */
9763 else if (op0 == PLUS || op1 == PLUS || op0 == NEG || op1 == NEG)
9766 /* If the two constants aren't the same, we can't do anything. The
9767 remaining six cases can all be done. */
9768 else if (const0 != const1)
9776 /* (a & b) | b == b */
9778 else /* op1 == XOR */
9779 /* (a ^ b) | b == a | b */
9785 /* (a & b) ^ b == (~a) & b */
9786 op0 = AND, *pcomp_p = 1;
9787 else /* op1 == IOR */
9788 /* (a | b) ^ b == a & ~b */
9789 op0 = AND, const0 = ~const0;
9794 /* (a | b) & b == b */
9796 else /* op1 == XOR */
9797 /* (a ^ b) & b) == (~a) & b */
9804 /* Check for NO-OP cases. */
9805 const0 &= GET_MODE_MASK (mode);
9807 && (op0 == IOR || op0 == XOR || op0 == PLUS))
9809 else if (const0 == 0 && op0 == AND)
9811 else if ((unsigned HOST_WIDE_INT) const0 == GET_MODE_MASK (mode)
9817 /* ??? Slightly redundant with the above mask, but not entirely.
9818 Moving this above means we'd have to sign-extend the mode mask
9819 for the final test. */
9820 if (op0 != UNKNOWN && op0 != NEG)
9821 *pconst0 = trunc_int_for_mode (const0, mode);
9826 /* A helper to simplify_shift_const_1 to determine the mode we can perform
9827 the shift in. The original shift operation CODE is performed on OP in
9828 ORIG_MODE. Return the wider mode MODE if we can perform the operation
9829 in that mode. Return ORIG_MODE otherwise. We can also assume that the
9830 result of the shift is subject to operation OUTER_CODE with operand
9833 static enum machine_mode
9834 try_widen_shift_mode (enum rtx_code code, rtx op, int count,
9835 enum machine_mode orig_mode, enum machine_mode mode,
9836 enum rtx_code outer_code, HOST_WIDE_INT outer_const)
9838 if (orig_mode == mode)
9840 gcc_assert (GET_MODE_PRECISION (mode) > GET_MODE_PRECISION (orig_mode));
9842 /* In general we can't perform in wider mode for right shift and rotate. */
9846 /* We can still widen if the bits brought in from the left are identical
9847 to the sign bit of ORIG_MODE. */
9848 if (num_sign_bit_copies (op, mode)
9849 > (unsigned) (GET_MODE_PRECISION (mode)
9850 - GET_MODE_PRECISION (orig_mode)))
9855 /* Similarly here but with zero bits. */
9856 if (HWI_COMPUTABLE_MODE_P (mode)
9857 && (nonzero_bits (op, mode) & ~GET_MODE_MASK (orig_mode)) == 0)
9860 /* We can also widen if the bits brought in will be masked off. This
9861 operation is performed in ORIG_MODE. */
9862 if (outer_code == AND)
9864 int care_bits = low_bitmask_len (orig_mode, outer_const);
9867 && GET_MODE_PRECISION (orig_mode) - care_bits >= count)
9883 /* Simplify a shift of VAROP by ORIG_COUNT bits. CODE says what kind
9884 of shift. The result of the shift is RESULT_MODE. Return NULL_RTX
9885 if we cannot simplify it. Otherwise, return a simplified value.
9887 The shift is normally computed in the widest mode we find in VAROP, as
9888 long as it isn't a different number of words than RESULT_MODE. Exceptions
9889 are ASHIFTRT and ROTATE, which are always done in their original mode. */
9892 simplify_shift_const_1 (enum rtx_code code, enum machine_mode result_mode,
9893 rtx varop, int orig_count)
9895 enum rtx_code orig_code = code;
9896 rtx orig_varop = varop;
9898 enum machine_mode mode = result_mode;
9899 enum machine_mode shift_mode, tmode;
9900 unsigned int mode_words
9901 = (GET_MODE_SIZE (mode) + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD;
9902 /* We form (outer_op (code varop count) (outer_const)). */
9903 enum rtx_code outer_op = UNKNOWN;
9904 HOST_WIDE_INT outer_const = 0;
9905 int complement_p = 0;
9908 /* Make sure and truncate the "natural" shift on the way in. We don't
9909 want to do this inside the loop as it makes it more difficult to
9911 if (SHIFT_COUNT_TRUNCATED)
9912 orig_count &= GET_MODE_BITSIZE (mode) - 1;
9914 /* If we were given an invalid count, don't do anything except exactly
9915 what was requested. */
9917 if (orig_count < 0 || orig_count >= (int) GET_MODE_PRECISION (mode))
9922 /* Unless one of the branches of the `if' in this loop does a `continue',
9923 we will `break' the loop after the `if'. */
9927 /* If we have an operand of (clobber (const_int 0)), fail. */
9928 if (GET_CODE (varop) == CLOBBER)
9931 /* Convert ROTATERT to ROTATE. */
9932 if (code == ROTATERT)
9934 unsigned int bitsize = GET_MODE_PRECISION (result_mode);
9936 if (VECTOR_MODE_P (result_mode))
9937 count = bitsize / GET_MODE_NUNITS (result_mode) - count;
9939 count = bitsize - count;
9942 shift_mode = try_widen_shift_mode (code, varop, count, result_mode,
9943 mode, outer_op, outer_const);
9945 /* Handle cases where the count is greater than the size of the mode
9946 minus 1. For ASHIFT, use the size minus one as the count (this can
9947 occur when simplifying (lshiftrt (ashiftrt ..))). For rotates,
9948 take the count modulo the size. For other shifts, the result is
9951 Since these shifts are being produced by the compiler by combining
9952 multiple operations, each of which are defined, we know what the
9953 result is supposed to be. */
9955 if (count > (GET_MODE_PRECISION (shift_mode) - 1))
9957 if (code == ASHIFTRT)
9958 count = GET_MODE_PRECISION (shift_mode) - 1;
9959 else if (code == ROTATE || code == ROTATERT)
9960 count %= GET_MODE_PRECISION (shift_mode);
9963 /* We can't simply return zero because there may be an
9971 /* If we discovered we had to complement VAROP, leave. Making a NOT
9972 here would cause an infinite loop. */
9976 /* An arithmetic right shift of a quantity known to be -1 or 0
9978 if (code == ASHIFTRT
9979 && (num_sign_bit_copies (varop, shift_mode)
9980 == GET_MODE_PRECISION (shift_mode)))
9986 /* If we are doing an arithmetic right shift and discarding all but
9987 the sign bit copies, this is equivalent to doing a shift by the
9988 bitsize minus one. Convert it into that shift because it will often
9989 allow other simplifications. */
9991 if (code == ASHIFTRT
9992 && (count + num_sign_bit_copies (varop, shift_mode)
9993 >= GET_MODE_PRECISION (shift_mode)))
9994 count = GET_MODE_PRECISION (shift_mode) - 1;
9996 /* We simplify the tests below and elsewhere by converting
9997 ASHIFTRT to LSHIFTRT if we know the sign bit is clear.
9998 `make_compound_operation' will convert it to an ASHIFTRT for
9999 those machines (such as VAX) that don't have an LSHIFTRT. */
10000 if (code == ASHIFTRT
10001 && val_signbit_known_clear_p (shift_mode,
10002 nonzero_bits (varop, shift_mode)))
10005 if (((code == LSHIFTRT
10006 && HWI_COMPUTABLE_MODE_P (shift_mode)
10007 && !(nonzero_bits (varop, shift_mode) >> count))
10009 && HWI_COMPUTABLE_MODE_P (shift_mode)
10010 && !((nonzero_bits (varop, shift_mode) << count)
10011 & GET_MODE_MASK (shift_mode))))
10012 && !side_effects_p (varop))
10013 varop = const0_rtx;
10015 switch (GET_CODE (varop))
10021 new_rtx = expand_compound_operation (varop);
10022 if (new_rtx != varop)
10030 /* If we have (xshiftrt (mem ...) C) and C is MODE_WIDTH
10031 minus the width of a smaller mode, we can do this with a
10032 SIGN_EXTEND or ZERO_EXTEND from the narrower memory location. */
10033 if ((code == ASHIFTRT || code == LSHIFTRT)
10034 && ! mode_dependent_address_p (XEXP (varop, 0))
10035 && ! MEM_VOLATILE_P (varop)
10036 && (tmode = mode_for_size (GET_MODE_BITSIZE (mode) - count,
10037 MODE_INT, 1)) != BLKmode)
10039 new_rtx = adjust_address_nv (varop, tmode,
10040 BYTES_BIG_ENDIAN ? 0
10041 : count / BITS_PER_UNIT);
10043 varop = gen_rtx_fmt_e (code == ASHIFTRT ? SIGN_EXTEND
10044 : ZERO_EXTEND, mode, new_rtx);
10051 /* If VAROP is a SUBREG, strip it as long as the inner operand has
10052 the same number of words as what we've seen so far. Then store
10053 the widest mode in MODE. */
10054 if (subreg_lowpart_p (varop)
10055 && (GET_MODE_SIZE (GET_MODE (SUBREG_REG (varop)))
10056 > GET_MODE_SIZE (GET_MODE (varop)))
10057 && (unsigned int) ((GET_MODE_SIZE (GET_MODE (SUBREG_REG (varop)))
10058 + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD)
10060 && GET_MODE_CLASS (GET_MODE (varop)) == MODE_INT
10061 && GET_MODE_CLASS (GET_MODE (SUBREG_REG (varop))) == MODE_INT)
10063 varop = SUBREG_REG (varop);
10064 if (GET_MODE_SIZE (GET_MODE (varop)) > GET_MODE_SIZE (mode))
10065 mode = GET_MODE (varop);
10071 /* Some machines use MULT instead of ASHIFT because MULT
10072 is cheaper. But it is still better on those machines to
10073 merge two shifts into one. */
10074 if (CONST_INT_P (XEXP (varop, 1))
10075 && exact_log2 (UINTVAL (XEXP (varop, 1))) >= 0)
10078 = simplify_gen_binary (ASHIFT, GET_MODE (varop),
10080 GEN_INT (exact_log2 (
10081 UINTVAL (XEXP (varop, 1)))));
10087 /* Similar, for when divides are cheaper. */
10088 if (CONST_INT_P (XEXP (varop, 1))
10089 && exact_log2 (UINTVAL (XEXP (varop, 1))) >= 0)
10092 = simplify_gen_binary (LSHIFTRT, GET_MODE (varop),
10094 GEN_INT (exact_log2 (
10095 UINTVAL (XEXP (varop, 1)))));
10101 /* If we are extracting just the sign bit of an arithmetic
10102 right shift, that shift is not needed. However, the sign
10103 bit of a wider mode may be different from what would be
10104 interpreted as the sign bit in a narrower mode, so, if
10105 the result is narrower, don't discard the shift. */
10106 if (code == LSHIFTRT
10107 && count == (GET_MODE_BITSIZE (result_mode) - 1)
10108 && (GET_MODE_BITSIZE (result_mode)
10109 >= GET_MODE_BITSIZE (GET_MODE (varop))))
10111 varop = XEXP (varop, 0);
10115 /* ... fall through ... */
10120 /* Here we have two nested shifts. The result is usually the
10121 AND of a new shift with a mask. We compute the result below. */
10122 if (CONST_INT_P (XEXP (varop, 1))
10123 && INTVAL (XEXP (varop, 1)) >= 0
10124 && INTVAL (XEXP (varop, 1)) < GET_MODE_PRECISION (GET_MODE (varop))
10125 && HWI_COMPUTABLE_MODE_P (result_mode)
10126 && HWI_COMPUTABLE_MODE_P (mode)
10127 && !VECTOR_MODE_P (result_mode))
10129 enum rtx_code first_code = GET_CODE (varop);
10130 unsigned int first_count = INTVAL (XEXP (varop, 1));
10131 unsigned HOST_WIDE_INT mask;
10134 /* We have one common special case. We can't do any merging if
10135 the inner code is an ASHIFTRT of a smaller mode. However, if
10136 we have (ashift:M1 (subreg:M1 (ashiftrt:M2 FOO C1) 0) C2)
10137 with C2 == GET_MODE_BITSIZE (M1) - GET_MODE_BITSIZE (M2),
10138 we can convert it to
10139 (ashiftrt:M1 (ashift:M1 (and:M1 (subreg:M1 FOO 0) C3) C2) C1).
10140 This simplifies certain SIGN_EXTEND operations. */
10141 if (code == ASHIFT && first_code == ASHIFTRT
10142 && count == (GET_MODE_PRECISION (result_mode)
10143 - GET_MODE_PRECISION (GET_MODE (varop))))
10145 /* C3 has the low-order C1 bits zero. */
10147 mask = GET_MODE_MASK (mode)
10148 & ~(((unsigned HOST_WIDE_INT) 1 << first_count) - 1);
10150 varop = simplify_and_const_int (NULL_RTX, result_mode,
10151 XEXP (varop, 0), mask);
10152 varop = simplify_shift_const (NULL_RTX, ASHIFT, result_mode,
10154 count = first_count;
10159 /* If this was (ashiftrt (ashift foo C1) C2) and FOO has more
10160 than C1 high-order bits equal to the sign bit, we can convert
10161 this to either an ASHIFT or an ASHIFTRT depending on the
10164 We cannot do this if VAROP's mode is not SHIFT_MODE. */
10166 if (code == ASHIFTRT && first_code == ASHIFT
10167 && GET_MODE (varop) == shift_mode
10168 && (num_sign_bit_copies (XEXP (varop, 0), shift_mode)
10171 varop = XEXP (varop, 0);
10172 count -= first_count;
10182 /* There are some cases we can't do. If CODE is ASHIFTRT,
10183 we can only do this if FIRST_CODE is also ASHIFTRT.
10185 We can't do the case when CODE is ROTATE and FIRST_CODE is
10188 If the mode of this shift is not the mode of the outer shift,
10189 we can't do this if either shift is a right shift or ROTATE.
10191 Finally, we can't do any of these if the mode is too wide
10192 unless the codes are the same.
10194 Handle the case where the shift codes are the same
10197 if (code == first_code)
10199 if (GET_MODE (varop) != result_mode
10200 && (code == ASHIFTRT || code == LSHIFTRT
10201 || code == ROTATE))
10204 count += first_count;
10205 varop = XEXP (varop, 0);
10209 if (code == ASHIFTRT
10210 || (code == ROTATE && first_code == ASHIFTRT)
10211 || GET_MODE_PRECISION (mode) > HOST_BITS_PER_WIDE_INT
10212 || (GET_MODE (varop) != result_mode
10213 && (first_code == ASHIFTRT || first_code == LSHIFTRT
10214 || first_code == ROTATE
10215 || code == ROTATE)))
10218 /* To compute the mask to apply after the shift, shift the
10219 nonzero bits of the inner shift the same way the
10220 outer shift will. */
10222 mask_rtx = GEN_INT (nonzero_bits (varop, GET_MODE (varop)));
10225 = simplify_const_binary_operation (code, result_mode, mask_rtx,
10228 /* Give up if we can't compute an outer operation to use. */
10230 || !CONST_INT_P (mask_rtx)
10231 || ! merge_outer_ops (&outer_op, &outer_const, AND,
10233 result_mode, &complement_p))
10236 /* If the shifts are in the same direction, we add the
10237 counts. Otherwise, we subtract them. */
10238 if ((code == ASHIFTRT || code == LSHIFTRT)
10239 == (first_code == ASHIFTRT || first_code == LSHIFTRT))
10240 count += first_count;
10242 count -= first_count;
10244 /* If COUNT is positive, the new shift is usually CODE,
10245 except for the two exceptions below, in which case it is
10246 FIRST_CODE. If the count is negative, FIRST_CODE should
10249 && ((first_code == ROTATE && code == ASHIFT)
10250 || (first_code == ASHIFTRT && code == LSHIFTRT)))
10252 else if (count < 0)
10253 code = first_code, count = -count;
10255 varop = XEXP (varop, 0);
10259 /* If we have (A << B << C) for any shift, we can convert this to
10260 (A << C << B). This wins if A is a constant. Only try this if
10261 B is not a constant. */
10263 else if (GET_CODE (varop) == code
10264 && CONST_INT_P (XEXP (varop, 0))
10265 && !CONST_INT_P (XEXP (varop, 1)))
10267 rtx new_rtx = simplify_const_binary_operation (code, mode,
10270 varop = gen_rtx_fmt_ee (code, mode, new_rtx, XEXP (varop, 1));
10277 if (VECTOR_MODE_P (mode))
10280 /* Make this fit the case below. */
10281 varop = gen_rtx_XOR (mode, XEXP (varop, 0),
10282 GEN_INT (GET_MODE_MASK (mode)));
10288 /* If we have (xshiftrt (ior (plus X (const_int -1)) X) C)
10289 with C the size of VAROP - 1 and the shift is logical if
10290 STORE_FLAG_VALUE is 1 and arithmetic if STORE_FLAG_VALUE is -1,
10291 we have an (le X 0) operation. If we have an arithmetic shift
10292 and STORE_FLAG_VALUE is 1 or we have a logical shift with
10293 STORE_FLAG_VALUE of -1, we have a (neg (le X 0)) operation. */
10295 if (GET_CODE (varop) == IOR && GET_CODE (XEXP (varop, 0)) == PLUS
10296 && XEXP (XEXP (varop, 0), 1) == constm1_rtx
10297 && (STORE_FLAG_VALUE == 1 || STORE_FLAG_VALUE == -1)
10298 && (code == LSHIFTRT || code == ASHIFTRT)
10299 && count == (GET_MODE_PRECISION (GET_MODE (varop)) - 1)
10300 && rtx_equal_p (XEXP (XEXP (varop, 0), 0), XEXP (varop, 1)))
10303 varop = gen_rtx_LE (GET_MODE (varop), XEXP (varop, 1),
10306 if (STORE_FLAG_VALUE == 1 ? code == ASHIFTRT : code == LSHIFTRT)
10307 varop = gen_rtx_NEG (GET_MODE (varop), varop);
10312 /* If we have (shift (logical)), move the logical to the outside
10313 to allow it to possibly combine with another logical and the
10314 shift to combine with another shift. This also canonicalizes to
10315 what a ZERO_EXTRACT looks like. Also, some machines have
10316 (and (shift)) insns. */
10318 if (CONST_INT_P (XEXP (varop, 1))
10319 /* We can't do this if we have (ashiftrt (xor)) and the
10320 constant has its sign bit set in shift_mode. */
10321 && !(code == ASHIFTRT && GET_CODE (varop) == XOR
10322 && 0 > trunc_int_for_mode (INTVAL (XEXP (varop, 1)),
10324 && (new_rtx = simplify_const_binary_operation (code, result_mode,
10326 GEN_INT (count))) != 0
10327 && CONST_INT_P (new_rtx)
10328 && merge_outer_ops (&outer_op, &outer_const, GET_CODE (varop),
10329 INTVAL (new_rtx), result_mode, &complement_p))
10331 varop = XEXP (varop, 0);
10335 /* If we can't do that, try to simplify the shift in each arm of the
10336 logical expression, make a new logical expression, and apply
10337 the inverse distributive law. This also can't be done
10338 for some (ashiftrt (xor)). */
10339 if (CONST_INT_P (XEXP (varop, 1))
10340 && !(code == ASHIFTRT && GET_CODE (varop) == XOR
10341 && 0 > trunc_int_for_mode (INTVAL (XEXP (varop, 1)),
10344 rtx lhs = simplify_shift_const (NULL_RTX, code, shift_mode,
10345 XEXP (varop, 0), count);
10346 rtx rhs = simplify_shift_const (NULL_RTX, code, shift_mode,
10347 XEXP (varop, 1), count);
10349 varop = simplify_gen_binary (GET_CODE (varop), shift_mode,
10351 varop = apply_distributive_law (varop);
10359 /* Convert (lshiftrt (eq FOO 0) C) to (xor FOO 1) if STORE_FLAG_VALUE
10360 says that the sign bit can be tested, FOO has mode MODE, C is
10361 GET_MODE_PRECISION (MODE) - 1, and FOO has only its low-order bit
10362 that may be nonzero. */
10363 if (code == LSHIFTRT
10364 && XEXP (varop, 1) == const0_rtx
10365 && GET_MODE (XEXP (varop, 0)) == result_mode
10366 && count == (GET_MODE_PRECISION (result_mode) - 1)
10367 && HWI_COMPUTABLE_MODE_P (result_mode)
10368 && STORE_FLAG_VALUE == -1
10369 && nonzero_bits (XEXP (varop, 0), result_mode) == 1
10370 && merge_outer_ops (&outer_op, &outer_const, XOR, 1, result_mode,
10373 varop = XEXP (varop, 0);
10380 /* (lshiftrt (neg A) C) where A is either 0 or 1 and C is one less
10381 than the number of bits in the mode is equivalent to A. */
10382 if (code == LSHIFTRT
10383 && count == (GET_MODE_PRECISION (result_mode) - 1)
10384 && nonzero_bits (XEXP (varop, 0), result_mode) == 1)
10386 varop = XEXP (varop, 0);
10391 /* NEG commutes with ASHIFT since it is multiplication. Move the
10392 NEG outside to allow shifts to combine. */
10394 && merge_outer_ops (&outer_op, &outer_const, NEG, 0, result_mode,
10397 varop = XEXP (varop, 0);
10403 /* (lshiftrt (plus A -1) C) where A is either 0 or 1 and C
10404 is one less than the number of bits in the mode is
10405 equivalent to (xor A 1). */
10406 if (code == LSHIFTRT
10407 && count == (GET_MODE_PRECISION (result_mode) - 1)
10408 && XEXP (varop, 1) == constm1_rtx
10409 && nonzero_bits (XEXP (varop, 0), result_mode) == 1
10410 && merge_outer_ops (&outer_op, &outer_const, XOR, 1, result_mode,
10414 varop = XEXP (varop, 0);
10418 /* If we have (xshiftrt (plus FOO BAR) C), and the only bits
10419 that might be nonzero in BAR are those being shifted out and those
10420 bits are known zero in FOO, we can replace the PLUS with FOO.
10421 Similarly in the other operand order. This code occurs when
10422 we are computing the size of a variable-size array. */
10424 if ((code == ASHIFTRT || code == LSHIFTRT)
10425 && count < HOST_BITS_PER_WIDE_INT
10426 && nonzero_bits (XEXP (varop, 1), result_mode) >> count == 0
10427 && (nonzero_bits (XEXP (varop, 1), result_mode)
10428 & nonzero_bits (XEXP (varop, 0), result_mode)) == 0)
10430 varop = XEXP (varop, 0);
10433 else if ((code == ASHIFTRT || code == LSHIFTRT)
10434 && count < HOST_BITS_PER_WIDE_INT
10435 && HWI_COMPUTABLE_MODE_P (result_mode)
10436 && 0 == (nonzero_bits (XEXP (varop, 0), result_mode)
10438 && 0 == (nonzero_bits (XEXP (varop, 0), result_mode)
10439 & nonzero_bits (XEXP (varop, 1),
10442 varop = XEXP (varop, 1);
10446 /* (ashift (plus foo C) N) is (plus (ashift foo N) C'). */
10448 && CONST_INT_P (XEXP (varop, 1))
10449 && (new_rtx = simplify_const_binary_operation (ASHIFT, result_mode,
10451 GEN_INT (count))) != 0
10452 && CONST_INT_P (new_rtx)
10453 && merge_outer_ops (&outer_op, &outer_const, PLUS,
10454 INTVAL (new_rtx), result_mode, &complement_p))
10456 varop = XEXP (varop, 0);
10460 /* Check for 'PLUS signbit', which is the canonical form of 'XOR
10461 signbit', and attempt to change the PLUS to an XOR and move it to
10462 the outer operation as is done above in the AND/IOR/XOR case
10463 leg for shift(logical). See details in logical handling above
10464 for reasoning in doing so. */
10465 if (code == LSHIFTRT
10466 && CONST_INT_P (XEXP (varop, 1))
10467 && mode_signbit_p (result_mode, XEXP (varop, 1))
10468 && (new_rtx = simplify_const_binary_operation (code, result_mode,
10470 GEN_INT (count))) != 0
10471 && CONST_INT_P (new_rtx)
10472 && merge_outer_ops (&outer_op, &outer_const, XOR,
10473 INTVAL (new_rtx), result_mode, &complement_p))
10475 varop = XEXP (varop, 0);
10482 /* If we have (xshiftrt (minus (ashiftrt X C)) X) C)
10483 with C the size of VAROP - 1 and the shift is logical if
10484 STORE_FLAG_VALUE is 1 and arithmetic if STORE_FLAG_VALUE is -1,
10485 we have a (gt X 0) operation. If the shift is arithmetic with
10486 STORE_FLAG_VALUE of 1 or logical with STORE_FLAG_VALUE == -1,
10487 we have a (neg (gt X 0)) operation. */
10489 if ((STORE_FLAG_VALUE == 1 || STORE_FLAG_VALUE == -1)
10490 && GET_CODE (XEXP (varop, 0)) == ASHIFTRT
10491 && count == (GET_MODE_PRECISION (GET_MODE (varop)) - 1)
10492 && (code == LSHIFTRT || code == ASHIFTRT)
10493 && CONST_INT_P (XEXP (XEXP (varop, 0), 1))
10494 && INTVAL (XEXP (XEXP (varop, 0), 1)) == count
10495 && rtx_equal_p (XEXP (XEXP (varop, 0), 0), XEXP (varop, 1)))
10498 varop = gen_rtx_GT (GET_MODE (varop), XEXP (varop, 1),
10501 if (STORE_FLAG_VALUE == 1 ? code == ASHIFTRT : code == LSHIFTRT)
10502 varop = gen_rtx_NEG (GET_MODE (varop), varop);
10509 /* Change (lshiftrt (truncate (lshiftrt))) to (truncate (lshiftrt))
10510 if the truncate does not affect the value. */
10511 if (code == LSHIFTRT
10512 && GET_CODE (XEXP (varop, 0)) == LSHIFTRT
10513 && CONST_INT_P (XEXP (XEXP (varop, 0), 1))
10514 && (INTVAL (XEXP (XEXP (varop, 0), 1))
10515 >= (GET_MODE_PRECISION (GET_MODE (XEXP (varop, 0)))
10516 - GET_MODE_PRECISION (GET_MODE (varop)))))
10518 rtx varop_inner = XEXP (varop, 0);
10521 = gen_rtx_LSHIFTRT (GET_MODE (varop_inner),
10522 XEXP (varop_inner, 0),
10524 (count + INTVAL (XEXP (varop_inner, 1))));
10525 varop = gen_rtx_TRUNCATE (GET_MODE (varop), varop_inner);
10538 shift_mode = try_widen_shift_mode (code, varop, count, result_mode, mode,
10539 outer_op, outer_const);
10541 /* We have now finished analyzing the shift. The result should be
10542 a shift of type CODE with SHIFT_MODE shifting VAROP COUNT places. If
10543 OUTER_OP is non-UNKNOWN, it is an operation that needs to be applied
10544 to the result of the shift. OUTER_CONST is the relevant constant,
10545 but we must turn off all bits turned off in the shift. */
10547 if (outer_op == UNKNOWN
10548 && orig_code == code && orig_count == count
10549 && varop == orig_varop
10550 && shift_mode == GET_MODE (varop))
10553 /* Make a SUBREG if necessary. If we can't make it, fail. */
10554 varop = gen_lowpart (shift_mode, varop);
10555 if (varop == NULL_RTX || GET_CODE (varop) == CLOBBER)
10558 /* If we have an outer operation and we just made a shift, it is
10559 possible that we could have simplified the shift were it not
10560 for the outer operation. So try to do the simplification
10563 if (outer_op != UNKNOWN)
10564 x = simplify_shift_const_1 (code, shift_mode, varop, count);
10569 x = simplify_gen_binary (code, shift_mode, varop, GEN_INT (count));
10571 /* If we were doing an LSHIFTRT in a wider mode than it was originally,
10572 turn off all the bits that the shift would have turned off. */
10573 if (orig_code == LSHIFTRT && result_mode != shift_mode)
10574 x = simplify_and_const_int (NULL_RTX, shift_mode, x,
10575 GET_MODE_MASK (result_mode) >> orig_count);
10577 /* Do the remainder of the processing in RESULT_MODE. */
10578 x = gen_lowpart_or_truncate (result_mode, x);
10580 /* If COMPLEMENT_P is set, we have to complement X before doing the outer
10583 x = simplify_gen_unary (NOT, result_mode, x, result_mode);
10585 if (outer_op != UNKNOWN)
10587 if (GET_RTX_CLASS (outer_op) != RTX_UNARY
10588 && GET_MODE_PRECISION (result_mode) < HOST_BITS_PER_WIDE_INT)
10589 outer_const = trunc_int_for_mode (outer_const, result_mode);
10591 if (outer_op == AND)
10592 x = simplify_and_const_int (NULL_RTX, result_mode, x, outer_const);
10593 else if (outer_op == SET)
10595 /* This means that we have determined that the result is
10596 equivalent to a constant. This should be rare. */
10597 if (!side_effects_p (x))
10598 x = GEN_INT (outer_const);
10600 else if (GET_RTX_CLASS (outer_op) == RTX_UNARY)
10601 x = simplify_gen_unary (outer_op, result_mode, x, result_mode);
10603 x = simplify_gen_binary (outer_op, result_mode, x,
10604 GEN_INT (outer_const));
10610 /* Simplify a shift of VAROP by COUNT bits. CODE says what kind of shift.
10611 The result of the shift is RESULT_MODE. If we cannot simplify it,
10612 return X or, if it is NULL, synthesize the expression with
10613 simplify_gen_binary. Otherwise, return a simplified value.
10615 The shift is normally computed in the widest mode we find in VAROP, as
10616 long as it isn't a different number of words than RESULT_MODE. Exceptions
10617 are ASHIFTRT and ROTATE, which are always done in their original mode. */
10620 simplify_shift_const (rtx x, enum rtx_code code, enum machine_mode result_mode,
10621 rtx varop, int count)
10623 rtx tem = simplify_shift_const_1 (code, result_mode, varop, count);
10628 x = simplify_gen_binary (code, GET_MODE (varop), varop, GEN_INT (count));
10629 if (GET_MODE (x) != result_mode)
10630 x = gen_lowpart (result_mode, x);
10635 /* Like recog, but we receive the address of a pointer to a new pattern.
10636 We try to match the rtx that the pointer points to.
10637 If that fails, we may try to modify or replace the pattern,
10638 storing the replacement into the same pointer object.
10640 Modifications include deletion or addition of CLOBBERs.
10642 PNOTES is a pointer to a location where any REG_UNUSED notes added for
10643 the CLOBBERs are placed.
10645 The value is the final insn code from the pattern ultimately matched,
10649 recog_for_combine (rtx *pnewpat, rtx insn, rtx *pnotes)
10651 rtx pat = *pnewpat;
10652 int insn_code_number;
10653 int num_clobbers_to_add = 0;
10656 rtx old_notes, old_pat;
10658 /* If PAT is a PARALLEL, check to see if it contains the CLOBBER
10659 we use to indicate that something didn't match. If we find such a
10660 thing, force rejection. */
10661 if (GET_CODE (pat) == PARALLEL)
10662 for (i = XVECLEN (pat, 0) - 1; i >= 0; i--)
10663 if (GET_CODE (XVECEXP (pat, 0, i)) == CLOBBER
10664 && XEXP (XVECEXP (pat, 0, i), 0) == const0_rtx)
10667 old_pat = PATTERN (insn);
10668 old_notes = REG_NOTES (insn);
10669 PATTERN (insn) = pat;
10670 REG_NOTES (insn) = 0;
10672 insn_code_number = recog (pat, insn, &num_clobbers_to_add);
10673 if (dump_file && (dump_flags & TDF_DETAILS))
10675 if (insn_code_number < 0)
10676 fputs ("Failed to match this instruction:\n", dump_file);
10678 fputs ("Successfully matched this instruction:\n", dump_file);
10679 print_rtl_single (dump_file, pat);
10682 /* If it isn't, there is the possibility that we previously had an insn
10683 that clobbered some register as a side effect, but the combined
10684 insn doesn't need to do that. So try once more without the clobbers
10685 unless this represents an ASM insn. */
10687 if (insn_code_number < 0 && ! check_asm_operands (pat)
10688 && GET_CODE (pat) == PARALLEL)
10692 for (pos = 0, i = 0; i < XVECLEN (pat, 0); i++)
10693 if (GET_CODE (XVECEXP (pat, 0, i)) != CLOBBER)
10696 SUBST (XVECEXP (pat, 0, pos), XVECEXP (pat, 0, i));
10700 SUBST_INT (XVECLEN (pat, 0), pos);
10703 pat = XVECEXP (pat, 0, 0);
10705 PATTERN (insn) = pat;
10706 insn_code_number = recog (pat, insn, &num_clobbers_to_add);
10707 if (dump_file && (dump_flags & TDF_DETAILS))
10709 if (insn_code_number < 0)
10710 fputs ("Failed to match this instruction:\n", dump_file);
10712 fputs ("Successfully matched this instruction:\n", dump_file);
10713 print_rtl_single (dump_file, pat);
10716 PATTERN (insn) = old_pat;
10717 REG_NOTES (insn) = old_notes;
10719 /* Recognize all noop sets, these will be killed by followup pass. */
10720 if (insn_code_number < 0 && GET_CODE (pat) == SET && set_noop_p (pat))
10721 insn_code_number = NOOP_MOVE_INSN_CODE, num_clobbers_to_add = 0;
10723 /* If we had any clobbers to add, make a new pattern than contains
10724 them. Then check to make sure that all of them are dead. */
10725 if (num_clobbers_to_add)
10727 rtx newpat = gen_rtx_PARALLEL (VOIDmode,
10728 rtvec_alloc (GET_CODE (pat) == PARALLEL
10729 ? (XVECLEN (pat, 0)
10730 + num_clobbers_to_add)
10731 : num_clobbers_to_add + 1));
10733 if (GET_CODE (pat) == PARALLEL)
10734 for (i = 0; i < XVECLEN (pat, 0); i++)
10735 XVECEXP (newpat, 0, i) = XVECEXP (pat, 0, i);
10737 XVECEXP (newpat, 0, 0) = pat;
10739 add_clobbers (newpat, insn_code_number);
10741 for (i = XVECLEN (newpat, 0) - num_clobbers_to_add;
10742 i < XVECLEN (newpat, 0); i++)
10744 if (REG_P (XEXP (XVECEXP (newpat, 0, i), 0))
10745 && ! reg_dead_at_p (XEXP (XVECEXP (newpat, 0, i), 0), insn))
10747 if (GET_CODE (XEXP (XVECEXP (newpat, 0, i), 0)) != SCRATCH)
10749 gcc_assert (REG_P (XEXP (XVECEXP (newpat, 0, i), 0)));
10750 notes = alloc_reg_note (REG_UNUSED,
10751 XEXP (XVECEXP (newpat, 0, i), 0), notes);
10760 return insn_code_number;
10763 /* Like gen_lowpart_general but for use by combine. In combine it
10764 is not possible to create any new pseudoregs. However, it is
10765 safe to create invalid memory addresses, because combine will
10766 try to recognize them and all they will do is make the combine
10769 If for some reason this cannot do its job, an rtx
10770 (clobber (const_int 0)) is returned.
10771 An insn containing that will not be recognized. */
10774 gen_lowpart_for_combine (enum machine_mode omode, rtx x)
10776 enum machine_mode imode = GET_MODE (x);
10777 unsigned int osize = GET_MODE_SIZE (omode);
10778 unsigned int isize = GET_MODE_SIZE (imode);
10781 if (omode == imode)
10784 /* Return identity if this is a CONST or symbolic reference. */
10786 && (GET_CODE (x) == CONST
10787 || GET_CODE (x) == SYMBOL_REF
10788 || GET_CODE (x) == LABEL_REF))
10791 /* We can only support MODE being wider than a word if X is a
10792 constant integer or has a mode the same size. */
10793 if (GET_MODE_SIZE (omode) > UNITS_PER_WORD
10794 && ! ((imode == VOIDmode
10795 && (CONST_INT_P (x)
10796 || GET_CODE (x) == CONST_DOUBLE))
10797 || isize == osize))
10800 /* X might be a paradoxical (subreg (mem)). In that case, gen_lowpart
10801 won't know what to do. So we will strip off the SUBREG here and
10802 process normally. */
10803 if (GET_CODE (x) == SUBREG && MEM_P (SUBREG_REG (x)))
10805 x = SUBREG_REG (x);
10807 /* For use in case we fall down into the address adjustments
10808 further below, we need to adjust the known mode and size of
10809 x; imode and isize, since we just adjusted x. */
10810 imode = GET_MODE (x);
10812 if (imode == omode)
10815 isize = GET_MODE_SIZE (imode);
10818 result = gen_lowpart_common (omode, x);
10827 /* Refuse to work on a volatile memory ref or one with a mode-dependent
10829 if (MEM_VOLATILE_P (x) || mode_dependent_address_p (XEXP (x, 0)))
10832 /* If we want to refer to something bigger than the original memref,
10833 generate a paradoxical subreg instead. That will force a reload
10834 of the original memref X. */
10836 return gen_rtx_SUBREG (omode, x, 0);
10838 if (WORDS_BIG_ENDIAN)
10839 offset = MAX (isize, UNITS_PER_WORD) - MAX (osize, UNITS_PER_WORD);
10841 /* Adjust the address so that the address-after-the-data is
10843 if (BYTES_BIG_ENDIAN)
10844 offset -= MIN (UNITS_PER_WORD, osize) - MIN (UNITS_PER_WORD, isize);
10846 return adjust_address_nv (x, omode, offset);
10849 /* If X is a comparison operator, rewrite it in a new mode. This
10850 probably won't match, but may allow further simplifications. */
10851 else if (COMPARISON_P (x))
10852 return gen_rtx_fmt_ee (GET_CODE (x), omode, XEXP (x, 0), XEXP (x, 1));
10854 /* If we couldn't simplify X any other way, just enclose it in a
10855 SUBREG. Normally, this SUBREG won't match, but some patterns may
10856 include an explicit SUBREG or we may simplify it further in combine. */
10862 offset = subreg_lowpart_offset (omode, imode);
10863 if (imode == VOIDmode)
10865 imode = int_mode_for_mode (omode);
10866 x = gen_lowpart_common (imode, x);
10870 res = simplify_gen_subreg (omode, x, imode, offset);
10876 return gen_rtx_CLOBBER (omode, const0_rtx);
10879 /* Try to simplify a comparison between OP0 and a constant OP1,
10880 where CODE is the comparison code that will be tested, into a
10881 (CODE OP0 const0_rtx) form.
10883 The result is a possibly different comparison code to use.
10884 *POP1 may be updated. */
10886 static enum rtx_code
10887 simplify_compare_const (enum rtx_code code, rtx op0, rtx *pop1)
10889 enum machine_mode mode = GET_MODE (op0);
10890 unsigned int mode_width = GET_MODE_PRECISION (mode);
10891 HOST_WIDE_INT const_op = INTVAL (*pop1);
10893 /* Get the constant we are comparing against and turn off all bits
10894 not on in our mode. */
10895 if (mode != VOIDmode)
10896 const_op = trunc_int_for_mode (const_op, mode);
10898 /* If we are comparing against a constant power of two and the value
10899 being compared can only have that single bit nonzero (e.g., it was
10900 `and'ed with that bit), we can replace this with a comparison
10903 && (code == EQ || code == NE || code == GE || code == GEU
10904 || code == LT || code == LTU)
10905 && mode_width <= HOST_BITS_PER_WIDE_INT
10906 && exact_log2 (const_op) >= 0
10907 && nonzero_bits (op0, mode) == (unsigned HOST_WIDE_INT) const_op)
10909 code = (code == EQ || code == GE || code == GEU ? NE : EQ);
10913 /* Similarly, if we are comparing a value known to be either -1 or
10914 0 with -1, change it to the opposite comparison against zero. */
10916 && (code == EQ || code == NE || code == GT || code == LE
10917 || code == GEU || code == LTU)
10918 && num_sign_bit_copies (op0, mode) == mode_width)
10920 code = (code == EQ || code == LE || code == GEU ? NE : EQ);
10924 /* Do some canonicalizations based on the comparison code. We prefer
10925 comparisons against zero and then prefer equality comparisons.
10926 If we can reduce the size of a constant, we will do that too. */
10930 /* < C is equivalent to <= (C - 1) */
10935 /* ... fall through to LE case below. */
10941 /* <= C is equivalent to < (C + 1); we do this for C < 0 */
10948 /* If we are doing a <= 0 comparison on a value known to have
10949 a zero sign bit, we can replace this with == 0. */
10950 else if (const_op == 0
10951 && mode_width <= HOST_BITS_PER_WIDE_INT
10952 && (nonzero_bits (op0, mode)
10953 & ((unsigned HOST_WIDE_INT) 1 << (mode_width - 1)))
10959 /* >= C is equivalent to > (C - 1). */
10964 /* ... fall through to GT below. */
10970 /* > C is equivalent to >= (C + 1); we do this for C < 0. */
10977 /* If we are doing a > 0 comparison on a value known to have
10978 a zero sign bit, we can replace this with != 0. */
10979 else if (const_op == 0
10980 && mode_width <= HOST_BITS_PER_WIDE_INT
10981 && (nonzero_bits (op0, mode)
10982 & ((unsigned HOST_WIDE_INT) 1 << (mode_width - 1)))
10988 /* < C is equivalent to <= (C - 1). */
10993 /* ... fall through ... */
10995 /* (unsigned) < 0x80000000 is equivalent to >= 0. */
10996 else if (mode_width <= HOST_BITS_PER_WIDE_INT
10997 && (unsigned HOST_WIDE_INT) const_op
10998 == (unsigned HOST_WIDE_INT) 1 << (mode_width - 1))
11008 /* unsigned <= 0 is equivalent to == 0 */
11011 /* (unsigned) <= 0x7fffffff is equivalent to >= 0. */
11012 else if (mode_width <= HOST_BITS_PER_WIDE_INT
11013 && (unsigned HOST_WIDE_INT) const_op
11014 == ((unsigned HOST_WIDE_INT) 1 << (mode_width - 1)) - 1)
11022 /* >= C is equivalent to > (C - 1). */
11027 /* ... fall through ... */
11030 /* (unsigned) >= 0x80000000 is equivalent to < 0. */
11031 else if (mode_width <= HOST_BITS_PER_WIDE_INT
11032 && (unsigned HOST_WIDE_INT) const_op
11033 == (unsigned HOST_WIDE_INT) 1 << (mode_width - 1))
11043 /* unsigned > 0 is equivalent to != 0 */
11046 /* (unsigned) > 0x7fffffff is equivalent to < 0. */
11047 else if (mode_width <= HOST_BITS_PER_WIDE_INT
11048 && (unsigned HOST_WIDE_INT) const_op
11049 == ((unsigned HOST_WIDE_INT) 1 << (mode_width - 1)) - 1)
11060 *pop1 = GEN_INT (const_op);
11064 /* Simplify a comparison between *POP0 and *POP1 where CODE is the
11065 comparison code that will be tested.
11067 The result is a possibly different comparison code to use. *POP0 and
11068 *POP1 may be updated.
11070 It is possible that we might detect that a comparison is either always
11071 true or always false. However, we do not perform general constant
11072 folding in combine, so this knowledge isn't useful. Such tautologies
11073 should have been detected earlier. Hence we ignore all such cases. */
11075 static enum rtx_code
11076 simplify_comparison (enum rtx_code code, rtx *pop0, rtx *pop1)
11082 enum machine_mode mode, tmode;
11084 /* Try a few ways of applying the same transformation to both operands. */
11087 #ifndef WORD_REGISTER_OPERATIONS
11088 /* The test below this one won't handle SIGN_EXTENDs on these machines,
11089 so check specially. */
11090 if (code != GTU && code != GEU && code != LTU && code != LEU
11091 && GET_CODE (op0) == ASHIFTRT && GET_CODE (op1) == ASHIFTRT
11092 && GET_CODE (XEXP (op0, 0)) == ASHIFT
11093 && GET_CODE (XEXP (op1, 0)) == ASHIFT
11094 && GET_CODE (XEXP (XEXP (op0, 0), 0)) == SUBREG
11095 && GET_CODE (XEXP (XEXP (op1, 0), 0)) == SUBREG
11096 && (GET_MODE (SUBREG_REG (XEXP (XEXP (op0, 0), 0)))
11097 == GET_MODE (SUBREG_REG (XEXP (XEXP (op1, 0), 0))))
11098 && CONST_INT_P (XEXP (op0, 1))
11099 && XEXP (op0, 1) == XEXP (op1, 1)
11100 && XEXP (op0, 1) == XEXP (XEXP (op0, 0), 1)
11101 && XEXP (op0, 1) == XEXP (XEXP (op1, 0), 1)
11102 && (INTVAL (XEXP (op0, 1))
11103 == (GET_MODE_PRECISION (GET_MODE (op0))
11104 - (GET_MODE_PRECISION
11105 (GET_MODE (SUBREG_REG (XEXP (XEXP (op0, 0), 0))))))))
11107 op0 = SUBREG_REG (XEXP (XEXP (op0, 0), 0));
11108 op1 = SUBREG_REG (XEXP (XEXP (op1, 0), 0));
11112 /* If both operands are the same constant shift, see if we can ignore the
11113 shift. We can if the shift is a rotate or if the bits shifted out of
11114 this shift are known to be zero for both inputs and if the type of
11115 comparison is compatible with the shift. */
11116 if (GET_CODE (op0) == GET_CODE (op1)
11117 && HWI_COMPUTABLE_MODE_P (GET_MODE(op0))
11118 && ((GET_CODE (op0) == ROTATE && (code == NE || code == EQ))
11119 || ((GET_CODE (op0) == LSHIFTRT || GET_CODE (op0) == ASHIFT)
11120 && (code != GT && code != LT && code != GE && code != LE))
11121 || (GET_CODE (op0) == ASHIFTRT
11122 && (code != GTU && code != LTU
11123 && code != GEU && code != LEU)))
11124 && CONST_INT_P (XEXP (op0, 1))
11125 && INTVAL (XEXP (op0, 1)) >= 0
11126 && INTVAL (XEXP (op0, 1)) < HOST_BITS_PER_WIDE_INT
11127 && XEXP (op0, 1) == XEXP (op1, 1))
11129 enum machine_mode mode = GET_MODE (op0);
11130 unsigned HOST_WIDE_INT mask = GET_MODE_MASK (mode);
11131 int shift_count = INTVAL (XEXP (op0, 1));
11133 if (GET_CODE (op0) == LSHIFTRT || GET_CODE (op0) == ASHIFTRT)
11134 mask &= (mask >> shift_count) << shift_count;
11135 else if (GET_CODE (op0) == ASHIFT)
11136 mask = (mask & (mask << shift_count)) >> shift_count;
11138 if ((nonzero_bits (XEXP (op0, 0), mode) & ~mask) == 0
11139 && (nonzero_bits (XEXP (op1, 0), mode) & ~mask) == 0)
11140 op0 = XEXP (op0, 0), op1 = XEXP (op1, 0);
11145 /* If both operands are AND's of a paradoxical SUBREG by constant, the
11146 SUBREGs are of the same mode, and, in both cases, the AND would
11147 be redundant if the comparison was done in the narrower mode,
11148 do the comparison in the narrower mode (e.g., we are AND'ing with 1
11149 and the operand's possibly nonzero bits are 0xffffff01; in that case
11150 if we only care about QImode, we don't need the AND). This case
11151 occurs if the output mode of an scc insn is not SImode and
11152 STORE_FLAG_VALUE == 1 (e.g., the 386).
11154 Similarly, check for a case where the AND's are ZERO_EXTEND
11155 operations from some narrower mode even though a SUBREG is not
11158 else if (GET_CODE (op0) == AND && GET_CODE (op1) == AND
11159 && CONST_INT_P (XEXP (op0, 1))
11160 && CONST_INT_P (XEXP (op1, 1)))
11162 rtx inner_op0 = XEXP (op0, 0);
11163 rtx inner_op1 = XEXP (op1, 0);
11164 HOST_WIDE_INT c0 = INTVAL (XEXP (op0, 1));
11165 HOST_WIDE_INT c1 = INTVAL (XEXP (op1, 1));
11168 if (paradoxical_subreg_p (inner_op0)
11169 && GET_CODE (inner_op1) == SUBREG
11170 && (GET_MODE (SUBREG_REG (inner_op0))
11171 == GET_MODE (SUBREG_REG (inner_op1)))
11172 && (GET_MODE_PRECISION (GET_MODE (SUBREG_REG (inner_op0)))
11173 <= HOST_BITS_PER_WIDE_INT)
11174 && (0 == ((~c0) & nonzero_bits (SUBREG_REG (inner_op0),
11175 GET_MODE (SUBREG_REG (inner_op0)))))
11176 && (0 == ((~c1) & nonzero_bits (SUBREG_REG (inner_op1),
11177 GET_MODE (SUBREG_REG (inner_op1))))))
11179 op0 = SUBREG_REG (inner_op0);
11180 op1 = SUBREG_REG (inner_op1);
11182 /* The resulting comparison is always unsigned since we masked
11183 off the original sign bit. */
11184 code = unsigned_condition (code);
11190 for (tmode = GET_CLASS_NARROWEST_MODE
11191 (GET_MODE_CLASS (GET_MODE (op0)));
11192 tmode != GET_MODE (op0); tmode = GET_MODE_WIDER_MODE (tmode))
11193 if ((unsigned HOST_WIDE_INT) c0 == GET_MODE_MASK (tmode))
11195 op0 = gen_lowpart (tmode, inner_op0);
11196 op1 = gen_lowpart (tmode, inner_op1);
11197 code = unsigned_condition (code);
11206 /* If both operands are NOT, we can strip off the outer operation
11207 and adjust the comparison code for swapped operands; similarly for
11208 NEG, except that this must be an equality comparison. */
11209 else if ((GET_CODE (op0) == NOT && GET_CODE (op1) == NOT)
11210 || (GET_CODE (op0) == NEG && GET_CODE (op1) == NEG
11211 && (code == EQ || code == NE)))
11212 op0 = XEXP (op0, 0), op1 = XEXP (op1, 0), code = swap_condition (code);
11218 /* If the first operand is a constant, swap the operands and adjust the
11219 comparison code appropriately, but don't do this if the second operand
11220 is already a constant integer. */
11221 if (swap_commutative_operands_p (op0, op1))
11223 tem = op0, op0 = op1, op1 = tem;
11224 code = swap_condition (code);
11227 /* We now enter a loop during which we will try to simplify the comparison.
11228 For the most part, we only are concerned with comparisons with zero,
11229 but some things may really be comparisons with zero but not start
11230 out looking that way. */
11232 while (CONST_INT_P (op1))
11234 enum machine_mode mode = GET_MODE (op0);
11235 unsigned int mode_width = GET_MODE_PRECISION (mode);
11236 unsigned HOST_WIDE_INT mask = GET_MODE_MASK (mode);
11237 int equality_comparison_p;
11238 int sign_bit_comparison_p;
11239 int unsigned_comparison_p;
11240 HOST_WIDE_INT const_op;
11242 /* We only want to handle integral modes. This catches VOIDmode,
11243 CCmode, and the floating-point modes. An exception is that we
11244 can handle VOIDmode if OP0 is a COMPARE or a comparison
11247 if (GET_MODE_CLASS (mode) != MODE_INT
11248 && ! (mode == VOIDmode
11249 && (GET_CODE (op0) == COMPARE || COMPARISON_P (op0))))
11252 /* Try to simplify the compare to constant, possibly changing the
11253 comparison op, and/or changing op1 to zero. */
11254 code = simplify_compare_const (code, op0, &op1);
11255 const_op = INTVAL (op1);
11257 /* Compute some predicates to simplify code below. */
11259 equality_comparison_p = (code == EQ || code == NE);
11260 sign_bit_comparison_p = ((code == LT || code == GE) && const_op == 0);
11261 unsigned_comparison_p = (code == LTU || code == LEU || code == GTU
11264 /* If this is a sign bit comparison and we can do arithmetic in
11265 MODE, say that we will only be needing the sign bit of OP0. */
11266 if (sign_bit_comparison_p && HWI_COMPUTABLE_MODE_P (mode))
11267 op0 = force_to_mode (op0, mode,
11268 (unsigned HOST_WIDE_INT) 1
11269 << (GET_MODE_PRECISION (mode) - 1),
11272 /* Now try cases based on the opcode of OP0. If none of the cases
11273 does a "continue", we exit this loop immediately after the
11276 switch (GET_CODE (op0))
11279 /* If we are extracting a single bit from a variable position in
11280 a constant that has only a single bit set and are comparing it
11281 with zero, we can convert this into an equality comparison
11282 between the position and the location of the single bit. */
11283 /* Except we can't if SHIFT_COUNT_TRUNCATED is set, since we might
11284 have already reduced the shift count modulo the word size. */
11285 if (!SHIFT_COUNT_TRUNCATED
11286 && CONST_INT_P (XEXP (op0, 0))
11287 && XEXP (op0, 1) == const1_rtx
11288 && equality_comparison_p && const_op == 0
11289 && (i = exact_log2 (UINTVAL (XEXP (op0, 0)))) >= 0)
11291 if (BITS_BIG_ENDIAN)
11293 enum machine_mode new_mode
11294 = mode_for_extraction (EP_extzv, 1);
11295 if (new_mode == MAX_MACHINE_MODE)
11296 i = BITS_PER_WORD - 1 - i;
11300 i = (GET_MODE_PRECISION (mode) - 1 - i);
11304 op0 = XEXP (op0, 2);
11308 /* Result is nonzero iff shift count is equal to I. */
11309 code = reverse_condition (code);
11313 /* ... fall through ... */
11316 tem = expand_compound_operation (op0);
11325 /* If testing for equality, we can take the NOT of the constant. */
11326 if (equality_comparison_p
11327 && (tem = simplify_unary_operation (NOT, mode, op1, mode)) != 0)
11329 op0 = XEXP (op0, 0);
11334 /* If just looking at the sign bit, reverse the sense of the
11336 if (sign_bit_comparison_p)
11338 op0 = XEXP (op0, 0);
11339 code = (code == GE ? LT : GE);
11345 /* If testing for equality, we can take the NEG of the constant. */
11346 if (equality_comparison_p
11347 && (tem = simplify_unary_operation (NEG, mode, op1, mode)) != 0)
11349 op0 = XEXP (op0, 0);
11354 /* The remaining cases only apply to comparisons with zero. */
11358 /* When X is ABS or is known positive,
11359 (neg X) is < 0 if and only if X != 0. */
11361 if (sign_bit_comparison_p
11362 && (GET_CODE (XEXP (op0, 0)) == ABS
11363 || (mode_width <= HOST_BITS_PER_WIDE_INT
11364 && (nonzero_bits (XEXP (op0, 0), mode)
11365 & ((unsigned HOST_WIDE_INT) 1 << (mode_width - 1)))
11368 op0 = XEXP (op0, 0);
11369 code = (code == LT ? NE : EQ);
11373 /* If we have NEG of something whose two high-order bits are the
11374 same, we know that "(-a) < 0" is equivalent to "a > 0". */
11375 if (num_sign_bit_copies (op0, mode) >= 2)
11377 op0 = XEXP (op0, 0);
11378 code = swap_condition (code);
11384 /* If we are testing equality and our count is a constant, we
11385 can perform the inverse operation on our RHS. */
11386 if (equality_comparison_p && CONST_INT_P (XEXP (op0, 1))
11387 && (tem = simplify_binary_operation (ROTATERT, mode,
11388 op1, XEXP (op0, 1))) != 0)
11390 op0 = XEXP (op0, 0);
11395 /* If we are doing a < 0 or >= 0 comparison, it means we are testing
11396 a particular bit. Convert it to an AND of a constant of that
11397 bit. This will be converted into a ZERO_EXTRACT. */
11398 if (const_op == 0 && sign_bit_comparison_p
11399 && CONST_INT_P (XEXP (op0, 1))
11400 && mode_width <= HOST_BITS_PER_WIDE_INT)
11402 op0 = simplify_and_const_int (NULL_RTX, mode, XEXP (op0, 0),
11403 ((unsigned HOST_WIDE_INT) 1
11405 - INTVAL (XEXP (op0, 1)))));
11406 code = (code == LT ? NE : EQ);
11410 /* Fall through. */
11413 /* ABS is ignorable inside an equality comparison with zero. */
11414 if (const_op == 0 && equality_comparison_p)
11416 op0 = XEXP (op0, 0);
11422 /* Can simplify (compare (zero/sign_extend FOO) CONST) to
11423 (compare FOO CONST) if CONST fits in FOO's mode and we
11424 are either testing inequality or have an unsigned
11425 comparison with ZERO_EXTEND or a signed comparison with
11426 SIGN_EXTEND. But don't do it if we don't have a compare
11427 insn of the given mode, since we'd have to revert it
11428 later on, and then we wouldn't know whether to sign- or
11430 mode = GET_MODE (XEXP (op0, 0));
11431 if (GET_MODE_CLASS (mode) == MODE_INT
11432 && ! unsigned_comparison_p
11433 && HWI_COMPUTABLE_MODE_P (mode)
11434 && trunc_int_for_mode (const_op, mode) == const_op
11435 && have_insn_for (COMPARE, mode))
11437 op0 = XEXP (op0, 0);
11443 /* Check for the case where we are comparing A - C1 with C2, that is
11445 (subreg:MODE (plus (A) (-C1))) op (C2)
11447 with C1 a constant, and try to lift the SUBREG, i.e. to do the
11448 comparison in the wider mode. One of the following two conditions
11449 must be true in order for this to be valid:
11451 1. The mode extension results in the same bit pattern being added
11452 on both sides and the comparison is equality or unsigned. As
11453 C2 has been truncated to fit in MODE, the pattern can only be
11456 2. The mode extension results in the sign bit being copied on
11459 The difficulty here is that we have predicates for A but not for
11460 (A - C1) so we need to check that C1 is within proper bounds so
11461 as to perturbate A as little as possible. */
11463 if (mode_width <= HOST_BITS_PER_WIDE_INT
11464 && subreg_lowpart_p (op0)
11465 && GET_MODE_PRECISION (GET_MODE (SUBREG_REG (op0))) > mode_width
11466 && GET_CODE (SUBREG_REG (op0)) == PLUS
11467 && CONST_INT_P (XEXP (SUBREG_REG (op0), 1)))
11469 enum machine_mode inner_mode = GET_MODE (SUBREG_REG (op0));
11470 rtx a = XEXP (SUBREG_REG (op0), 0);
11471 HOST_WIDE_INT c1 = -INTVAL (XEXP (SUBREG_REG (op0), 1));
11474 && (unsigned HOST_WIDE_INT) c1
11475 < (unsigned HOST_WIDE_INT) 1 << (mode_width - 1)
11476 && (equality_comparison_p || unsigned_comparison_p)
11477 /* (A - C1) zero-extends if it is positive and sign-extends
11478 if it is negative, C2 both zero- and sign-extends. */
11479 && ((0 == (nonzero_bits (a, inner_mode)
11480 & ~GET_MODE_MASK (mode))
11482 /* (A - C1) sign-extends if it is positive and 1-extends
11483 if it is negative, C2 both sign- and 1-extends. */
11484 || (num_sign_bit_copies (a, inner_mode)
11485 > (unsigned int) (GET_MODE_PRECISION (inner_mode)
11488 || ((unsigned HOST_WIDE_INT) c1
11489 < (unsigned HOST_WIDE_INT) 1 << (mode_width - 2)
11490 /* (A - C1) always sign-extends, like C2. */
11491 && num_sign_bit_copies (a, inner_mode)
11492 > (unsigned int) (GET_MODE_PRECISION (inner_mode)
11493 - (mode_width - 1))))
11495 op0 = SUBREG_REG (op0);
11500 /* If the inner mode is narrower and we are extracting the low part,
11501 we can treat the SUBREG as if it were a ZERO_EXTEND. */
11502 if (subreg_lowpart_p (op0)
11503 && GET_MODE_PRECISION (GET_MODE (SUBREG_REG (op0))) < mode_width)
11504 /* Fall through */ ;
11508 /* ... fall through ... */
11511 mode = GET_MODE (XEXP (op0, 0));
11512 if (GET_MODE_CLASS (mode) == MODE_INT
11513 && (unsigned_comparison_p || equality_comparison_p)
11514 && HWI_COMPUTABLE_MODE_P (mode)
11515 && (unsigned HOST_WIDE_INT) const_op <= GET_MODE_MASK (mode)
11517 && have_insn_for (COMPARE, mode))
11519 op0 = XEXP (op0, 0);
11525 /* (eq (plus X A) B) -> (eq X (minus B A)). We can only do
11526 this for equality comparisons due to pathological cases involving
11528 if (equality_comparison_p
11529 && 0 != (tem = simplify_binary_operation (MINUS, mode,
11530 op1, XEXP (op0, 1))))
11532 op0 = XEXP (op0, 0);
11537 /* (plus (abs X) (const_int -1)) is < 0 if and only if X == 0. */
11538 if (const_op == 0 && XEXP (op0, 1) == constm1_rtx
11539 && GET_CODE (XEXP (op0, 0)) == ABS && sign_bit_comparison_p)
11541 op0 = XEXP (XEXP (op0, 0), 0);
11542 code = (code == LT ? EQ : NE);
11548 /* We used to optimize signed comparisons against zero, but that
11549 was incorrect. Unsigned comparisons against zero (GTU, LEU)
11550 arrive here as equality comparisons, or (GEU, LTU) are
11551 optimized away. No need to special-case them. */
11553 /* (eq (minus A B) C) -> (eq A (plus B C)) or
11554 (eq B (minus A C)), whichever simplifies. We can only do
11555 this for equality comparisons due to pathological cases involving
11557 if (equality_comparison_p
11558 && 0 != (tem = simplify_binary_operation (PLUS, mode,
11559 XEXP (op0, 1), op1)))
11561 op0 = XEXP (op0, 0);
11566 if (equality_comparison_p
11567 && 0 != (tem = simplify_binary_operation (MINUS, mode,
11568 XEXP (op0, 0), op1)))
11570 op0 = XEXP (op0, 1);
11575 /* The sign bit of (minus (ashiftrt X C) X), where C is the number
11576 of bits in X minus 1, is one iff X > 0. */
11577 if (sign_bit_comparison_p && GET_CODE (XEXP (op0, 0)) == ASHIFTRT
11578 && CONST_INT_P (XEXP (XEXP (op0, 0), 1))
11579 && UINTVAL (XEXP (XEXP (op0, 0), 1)) == mode_width - 1
11580 && rtx_equal_p (XEXP (XEXP (op0, 0), 0), XEXP (op0, 1)))
11582 op0 = XEXP (op0, 1);
11583 code = (code == GE ? LE : GT);
11589 /* (eq (xor A B) C) -> (eq A (xor B C)). This is a simplification
11590 if C is zero or B is a constant. */
11591 if (equality_comparison_p
11592 && 0 != (tem = simplify_binary_operation (XOR, mode,
11593 XEXP (op0, 1), op1)))
11595 op0 = XEXP (op0, 0);
11602 case UNEQ: case LTGT:
11603 case LT: case LTU: case UNLT: case LE: case LEU: case UNLE:
11604 case GT: case GTU: case UNGT: case GE: case GEU: case UNGE:
11605 case UNORDERED: case ORDERED:
11606 /* We can't do anything if OP0 is a condition code value, rather
11607 than an actual data value. */
11609 || CC0_P (XEXP (op0, 0))
11610 || GET_MODE_CLASS (GET_MODE (XEXP (op0, 0))) == MODE_CC)
11613 /* Get the two operands being compared. */
11614 if (GET_CODE (XEXP (op0, 0)) == COMPARE)
11615 tem = XEXP (XEXP (op0, 0), 0), tem1 = XEXP (XEXP (op0, 0), 1);
11617 tem = XEXP (op0, 0), tem1 = XEXP (op0, 1);
11619 /* Check for the cases where we simply want the result of the
11620 earlier test or the opposite of that result. */
11621 if (code == NE || code == EQ
11622 || (val_signbit_known_set_p (GET_MODE (op0), STORE_FLAG_VALUE)
11623 && (code == LT || code == GE)))
11625 enum rtx_code new_code;
11626 if (code == LT || code == NE)
11627 new_code = GET_CODE (op0);
11629 new_code = reversed_comparison_code (op0, NULL);
11631 if (new_code != UNKNOWN)
11642 /* The sign bit of (ior (plus X (const_int -1)) X) is nonzero
11644 if (sign_bit_comparison_p && GET_CODE (XEXP (op0, 0)) == PLUS
11645 && XEXP (XEXP (op0, 0), 1) == constm1_rtx
11646 && rtx_equal_p (XEXP (XEXP (op0, 0), 0), XEXP (op0, 1)))
11648 op0 = XEXP (op0, 1);
11649 code = (code == GE ? GT : LE);
11655 /* Convert (and (xshift 1 X) Y) to (and (lshiftrt Y X) 1). This
11656 will be converted to a ZERO_EXTRACT later. */
11657 if (const_op == 0 && equality_comparison_p
11658 && GET_CODE (XEXP (op0, 0)) == ASHIFT
11659 && XEXP (XEXP (op0, 0), 0) == const1_rtx)
11661 op0 = gen_rtx_LSHIFTRT (mode, XEXP (op0, 1),
11662 XEXP (XEXP (op0, 0), 1));
11663 op0 = simplify_and_const_int (NULL_RTX, mode, op0, 1);
11667 /* If we are comparing (and (lshiftrt X C1) C2) for equality with
11668 zero and X is a comparison and C1 and C2 describe only bits set
11669 in STORE_FLAG_VALUE, we can compare with X. */
11670 if (const_op == 0 && equality_comparison_p
11671 && mode_width <= HOST_BITS_PER_WIDE_INT
11672 && CONST_INT_P (XEXP (op0, 1))
11673 && GET_CODE (XEXP (op0, 0)) == LSHIFTRT
11674 && CONST_INT_P (XEXP (XEXP (op0, 0), 1))
11675 && INTVAL (XEXP (XEXP (op0, 0), 1)) >= 0
11676 && INTVAL (XEXP (XEXP (op0, 0), 1)) < HOST_BITS_PER_WIDE_INT)
11678 mask = ((INTVAL (XEXP (op0, 1)) & GET_MODE_MASK (mode))
11679 << INTVAL (XEXP (XEXP (op0, 0), 1)));
11680 if ((~STORE_FLAG_VALUE & mask) == 0
11681 && (COMPARISON_P (XEXP (XEXP (op0, 0), 0))
11682 || ((tem = get_last_value (XEXP (XEXP (op0, 0), 0))) != 0
11683 && COMPARISON_P (tem))))
11685 op0 = XEXP (XEXP (op0, 0), 0);
11690 /* If we are doing an equality comparison of an AND of a bit equal
11691 to the sign bit, replace this with a LT or GE comparison of
11692 the underlying value. */
11693 if (equality_comparison_p
11695 && CONST_INT_P (XEXP (op0, 1))
11696 && mode_width <= HOST_BITS_PER_WIDE_INT
11697 && ((INTVAL (XEXP (op0, 1)) & GET_MODE_MASK (mode))
11698 == (unsigned HOST_WIDE_INT) 1 << (mode_width - 1)))
11700 op0 = XEXP (op0, 0);
11701 code = (code == EQ ? GE : LT);
11705 /* If this AND operation is really a ZERO_EXTEND from a narrower
11706 mode, the constant fits within that mode, and this is either an
11707 equality or unsigned comparison, try to do this comparison in
11712 (ne:DI (and:DI (reg:DI 4) (const_int 0xffffffff)) (const_int 0))
11713 -> (ne:DI (reg:SI 4) (const_int 0))
11715 unless TRULY_NOOP_TRUNCATION allows it or the register is
11716 known to hold a value of the required mode the
11717 transformation is invalid. */
11718 if ((equality_comparison_p || unsigned_comparison_p)
11719 && CONST_INT_P (XEXP (op0, 1))
11720 && (i = exact_log2 ((UINTVAL (XEXP (op0, 1))
11721 & GET_MODE_MASK (mode))
11723 && const_op >> i == 0
11724 && (tmode = mode_for_size (i, MODE_INT, 1)) != BLKmode
11725 && (TRULY_NOOP_TRUNCATION_MODES_P (tmode, GET_MODE (op0))
11726 || (REG_P (XEXP (op0, 0))
11727 && reg_truncated_to_mode (tmode, XEXP (op0, 0)))))
11729 op0 = gen_lowpart (tmode, XEXP (op0, 0));
11733 /* If this is (and:M1 (subreg:M2 X 0) (const_int C1)) where C1
11734 fits in both M1 and M2 and the SUBREG is either paradoxical
11735 or represents the low part, permute the SUBREG and the AND
11737 if (GET_CODE (XEXP (op0, 0)) == SUBREG)
11739 unsigned HOST_WIDE_INT c1;
11740 tmode = GET_MODE (SUBREG_REG (XEXP (op0, 0)));
11741 /* Require an integral mode, to avoid creating something like
11743 if (SCALAR_INT_MODE_P (tmode)
11744 /* It is unsafe to commute the AND into the SUBREG if the
11745 SUBREG is paradoxical and WORD_REGISTER_OPERATIONS is
11746 not defined. As originally written the upper bits
11747 have a defined value due to the AND operation.
11748 However, if we commute the AND inside the SUBREG then
11749 they no longer have defined values and the meaning of
11750 the code has been changed. */
11752 #ifdef WORD_REGISTER_OPERATIONS
11753 || (mode_width > GET_MODE_PRECISION (tmode)
11754 && mode_width <= BITS_PER_WORD)
11756 || (mode_width <= GET_MODE_PRECISION (tmode)
11757 && subreg_lowpart_p (XEXP (op0, 0))))
11758 && CONST_INT_P (XEXP (op0, 1))
11759 && mode_width <= HOST_BITS_PER_WIDE_INT
11760 && HWI_COMPUTABLE_MODE_P (tmode)
11761 && ((c1 = INTVAL (XEXP (op0, 1))) & ~mask) == 0
11762 && (c1 & ~GET_MODE_MASK (tmode)) == 0
11764 && c1 != GET_MODE_MASK (tmode))
11766 op0 = simplify_gen_binary (AND, tmode,
11767 SUBREG_REG (XEXP (op0, 0)),
11768 gen_int_mode (c1, tmode));
11769 op0 = gen_lowpart (mode, op0);
11774 /* Convert (ne (and (not X) 1) 0) to (eq (and X 1) 0). */
11775 if (const_op == 0 && equality_comparison_p
11776 && XEXP (op0, 1) == const1_rtx
11777 && GET_CODE (XEXP (op0, 0)) == NOT)
11779 op0 = simplify_and_const_int (NULL_RTX, mode,
11780 XEXP (XEXP (op0, 0), 0), 1);
11781 code = (code == NE ? EQ : NE);
11785 /* Convert (ne (and (lshiftrt (not X)) 1) 0) to
11786 (eq (and (lshiftrt X) 1) 0).
11787 Also handle the case where (not X) is expressed using xor. */
11788 if (const_op == 0 && equality_comparison_p
11789 && XEXP (op0, 1) == const1_rtx
11790 && GET_CODE (XEXP (op0, 0)) == LSHIFTRT)
11792 rtx shift_op = XEXP (XEXP (op0, 0), 0);
11793 rtx shift_count = XEXP (XEXP (op0, 0), 1);
11795 if (GET_CODE (shift_op) == NOT
11796 || (GET_CODE (shift_op) == XOR
11797 && CONST_INT_P (XEXP (shift_op, 1))
11798 && CONST_INT_P (shift_count)
11799 && HWI_COMPUTABLE_MODE_P (mode)
11800 && (UINTVAL (XEXP (shift_op, 1))
11801 == (unsigned HOST_WIDE_INT) 1
11802 << INTVAL (shift_count))))
11805 = gen_rtx_LSHIFTRT (mode, XEXP (shift_op, 0), shift_count);
11806 op0 = simplify_and_const_int (NULL_RTX, mode, op0, 1);
11807 code = (code == NE ? EQ : NE);
11814 /* If we have (compare (ashift FOO N) (const_int C)) and
11815 the high order N bits of FOO (N+1 if an inequality comparison)
11816 are known to be zero, we can do this by comparing FOO with C
11817 shifted right N bits so long as the low-order N bits of C are
11819 if (CONST_INT_P (XEXP (op0, 1))
11820 && INTVAL (XEXP (op0, 1)) >= 0
11821 && ((INTVAL (XEXP (op0, 1)) + ! equality_comparison_p)
11822 < HOST_BITS_PER_WIDE_INT)
11823 && (((unsigned HOST_WIDE_INT) const_op
11824 & (((unsigned HOST_WIDE_INT) 1 << INTVAL (XEXP (op0, 1)))
11826 && mode_width <= HOST_BITS_PER_WIDE_INT
11827 && (nonzero_bits (XEXP (op0, 0), mode)
11828 & ~(mask >> (INTVAL (XEXP (op0, 1))
11829 + ! equality_comparison_p))) == 0)
11831 /* We must perform a logical shift, not an arithmetic one,
11832 as we want the top N bits of C to be zero. */
11833 unsigned HOST_WIDE_INT temp = const_op & GET_MODE_MASK (mode);
11835 temp >>= INTVAL (XEXP (op0, 1));
11836 op1 = gen_int_mode (temp, mode);
11837 op0 = XEXP (op0, 0);
11841 /* If we are doing a sign bit comparison, it means we are testing
11842 a particular bit. Convert it to the appropriate AND. */
11843 if (sign_bit_comparison_p && CONST_INT_P (XEXP (op0, 1))
11844 && mode_width <= HOST_BITS_PER_WIDE_INT)
11846 op0 = simplify_and_const_int (NULL_RTX, mode, XEXP (op0, 0),
11847 ((unsigned HOST_WIDE_INT) 1
11849 - INTVAL (XEXP (op0, 1)))));
11850 code = (code == LT ? NE : EQ);
11854 /* If this an equality comparison with zero and we are shifting
11855 the low bit to the sign bit, we can convert this to an AND of the
11857 if (const_op == 0 && equality_comparison_p
11858 && CONST_INT_P (XEXP (op0, 1))
11859 && UINTVAL (XEXP (op0, 1)) == mode_width - 1)
11861 op0 = simplify_and_const_int (NULL_RTX, mode, XEXP (op0, 0), 1);
11867 /* If this is an equality comparison with zero, we can do this
11868 as a logical shift, which might be much simpler. */
11869 if (equality_comparison_p && const_op == 0
11870 && CONST_INT_P (XEXP (op0, 1)))
11872 op0 = simplify_shift_const (NULL_RTX, LSHIFTRT, mode,
11874 INTVAL (XEXP (op0, 1)));
11878 /* If OP0 is a sign extension and CODE is not an unsigned comparison,
11879 do the comparison in a narrower mode. */
11880 if (! unsigned_comparison_p
11881 && CONST_INT_P (XEXP (op0, 1))
11882 && GET_CODE (XEXP (op0, 0)) == ASHIFT
11883 && XEXP (op0, 1) == XEXP (XEXP (op0, 0), 1)
11884 && (tmode = mode_for_size (mode_width - INTVAL (XEXP (op0, 1)),
11885 MODE_INT, 1)) != BLKmode
11886 && (((unsigned HOST_WIDE_INT) const_op
11887 + (GET_MODE_MASK (tmode) >> 1) + 1)
11888 <= GET_MODE_MASK (tmode)))
11890 op0 = gen_lowpart (tmode, XEXP (XEXP (op0, 0), 0));
11894 /* Likewise if OP0 is a PLUS of a sign extension with a
11895 constant, which is usually represented with the PLUS
11896 between the shifts. */
11897 if (! unsigned_comparison_p
11898 && CONST_INT_P (XEXP (op0, 1))
11899 && GET_CODE (XEXP (op0, 0)) == PLUS
11900 && CONST_INT_P (XEXP (XEXP (op0, 0), 1))
11901 && GET_CODE (XEXP (XEXP (op0, 0), 0)) == ASHIFT
11902 && XEXP (op0, 1) == XEXP (XEXP (XEXP (op0, 0), 0), 1)
11903 && (tmode = mode_for_size (mode_width - INTVAL (XEXP (op0, 1)),
11904 MODE_INT, 1)) != BLKmode
11905 && (((unsigned HOST_WIDE_INT) const_op
11906 + (GET_MODE_MASK (tmode) >> 1) + 1)
11907 <= GET_MODE_MASK (tmode)))
11909 rtx inner = XEXP (XEXP (XEXP (op0, 0), 0), 0);
11910 rtx add_const = XEXP (XEXP (op0, 0), 1);
11911 rtx new_const = simplify_gen_binary (ASHIFTRT, GET_MODE (op0),
11912 add_const, XEXP (op0, 1));
11914 op0 = simplify_gen_binary (PLUS, tmode,
11915 gen_lowpart (tmode, inner),
11920 /* ... fall through ... */
11922 /* If we have (compare (xshiftrt FOO N) (const_int C)) and
11923 the low order N bits of FOO are known to be zero, we can do this
11924 by comparing FOO with C shifted left N bits so long as no
11925 overflow occurs. Even if the low order N bits of FOO aren't known
11926 to be zero, if the comparison is >= or < we can use the same
11927 optimization and for > or <= by setting all the low
11928 order N bits in the comparison constant. */
11929 if (CONST_INT_P (XEXP (op0, 1))
11930 && INTVAL (XEXP (op0, 1)) > 0
11931 && INTVAL (XEXP (op0, 1)) < HOST_BITS_PER_WIDE_INT
11932 && mode_width <= HOST_BITS_PER_WIDE_INT
11933 && (((unsigned HOST_WIDE_INT) const_op
11934 + (GET_CODE (op0) != LSHIFTRT
11935 ? ((GET_MODE_MASK (mode) >> INTVAL (XEXP (op0, 1)) >> 1)
11938 <= GET_MODE_MASK (mode) >> INTVAL (XEXP (op0, 1))))
11940 unsigned HOST_WIDE_INT low_bits
11941 = (nonzero_bits (XEXP (op0, 0), mode)
11942 & (((unsigned HOST_WIDE_INT) 1
11943 << INTVAL (XEXP (op0, 1))) - 1));
11944 if (low_bits == 0 || !equality_comparison_p)
11946 /* If the shift was logical, then we must make the condition
11948 if (GET_CODE (op0) == LSHIFTRT)
11949 code = unsigned_condition (code);
11951 const_op <<= INTVAL (XEXP (op0, 1));
11953 && (code == GT || code == GTU
11954 || code == LE || code == LEU))
11956 |= (((HOST_WIDE_INT) 1 << INTVAL (XEXP (op0, 1))) - 1);
11957 op1 = GEN_INT (const_op);
11958 op0 = XEXP (op0, 0);
11963 /* If we are using this shift to extract just the sign bit, we
11964 can replace this with an LT or GE comparison. */
11966 && (equality_comparison_p || sign_bit_comparison_p)
11967 && CONST_INT_P (XEXP (op0, 1))
11968 && UINTVAL (XEXP (op0, 1)) == mode_width - 1)
11970 op0 = XEXP (op0, 0);
11971 code = (code == NE || code == GT ? LT : GE);
11983 /* Now make any compound operations involved in this comparison. Then,
11984 check for an outmost SUBREG on OP0 that is not doing anything or is
11985 paradoxical. The latter transformation must only be performed when
11986 it is known that the "extra" bits will be the same in op0 and op1 or
11987 that they don't matter. There are three cases to consider:
11989 1. SUBREG_REG (op0) is a register. In this case the bits are don't
11990 care bits and we can assume they have any convenient value. So
11991 making the transformation is safe.
11993 2. SUBREG_REG (op0) is a memory and LOAD_EXTEND_OP is not defined.
11994 In this case the upper bits of op0 are undefined. We should not make
11995 the simplification in that case as we do not know the contents of
11998 3. SUBREG_REG (op0) is a memory and LOAD_EXTEND_OP is defined and not
11999 UNKNOWN. In that case we know those bits are zeros or ones. We must
12000 also be sure that they are the same as the upper bits of op1.
12002 We can never remove a SUBREG for a non-equality comparison because
12003 the sign bit is in a different place in the underlying object. */
12005 op0 = make_compound_operation (op0, op1 == const0_rtx ? COMPARE : SET);
12006 op1 = make_compound_operation (op1, SET);
12008 if (GET_CODE (op0) == SUBREG && subreg_lowpart_p (op0)
12009 && GET_MODE_CLASS (GET_MODE (op0)) == MODE_INT
12010 && GET_MODE_CLASS (GET_MODE (SUBREG_REG (op0))) == MODE_INT
12011 && (code == NE || code == EQ))
12013 if (paradoxical_subreg_p (op0))
12015 /* For paradoxical subregs, allow case 1 as above. Case 3 isn't
12017 if (REG_P (SUBREG_REG (op0)))
12019 op0 = SUBREG_REG (op0);
12020 op1 = gen_lowpart (GET_MODE (op0), op1);
12023 else if ((GET_MODE_PRECISION (GET_MODE (SUBREG_REG (op0)))
12024 <= HOST_BITS_PER_WIDE_INT)
12025 && (nonzero_bits (SUBREG_REG (op0),
12026 GET_MODE (SUBREG_REG (op0)))
12027 & ~GET_MODE_MASK (GET_MODE (op0))) == 0)
12029 tem = gen_lowpart (GET_MODE (SUBREG_REG (op0)), op1);
12031 if ((nonzero_bits (tem, GET_MODE (SUBREG_REG (op0)))
12032 & ~GET_MODE_MASK (GET_MODE (op0))) == 0)
12033 op0 = SUBREG_REG (op0), op1 = tem;
12037 /* We now do the opposite procedure: Some machines don't have compare
12038 insns in all modes. If OP0's mode is an integer mode smaller than a
12039 word and we can't do a compare in that mode, see if there is a larger
12040 mode for which we can do the compare. There are a number of cases in
12041 which we can use the wider mode. */
12043 mode = GET_MODE (op0);
12044 if (mode != VOIDmode && GET_MODE_CLASS (mode) == MODE_INT
12045 && GET_MODE_SIZE (mode) < UNITS_PER_WORD
12046 && ! have_insn_for (COMPARE, mode))
12047 for (tmode = GET_MODE_WIDER_MODE (mode);
12048 (tmode != VOIDmode && HWI_COMPUTABLE_MODE_P (tmode));
12049 tmode = GET_MODE_WIDER_MODE (tmode))
12050 if (have_insn_for (COMPARE, tmode))
12054 /* If this is a test for negative, we can make an explicit
12055 test of the sign bit. Test this first so we can use
12056 a paradoxical subreg to extend OP0. */
12058 if (op1 == const0_rtx && (code == LT || code == GE)
12059 && HWI_COMPUTABLE_MODE_P (mode))
12061 op0 = simplify_gen_binary (AND, tmode,
12062 gen_lowpart (tmode, op0),
12063 GEN_INT ((unsigned HOST_WIDE_INT) 1
12064 << (GET_MODE_BITSIZE (mode)
12066 code = (code == LT) ? NE : EQ;
12070 /* If the only nonzero bits in OP0 and OP1 are those in the
12071 narrower mode and this is an equality or unsigned comparison,
12072 we can use the wider mode. Similarly for sign-extended
12073 values, in which case it is true for all comparisons. */
12074 zero_extended = ((code == EQ || code == NE
12075 || code == GEU || code == GTU
12076 || code == LEU || code == LTU)
12077 && (nonzero_bits (op0, tmode)
12078 & ~GET_MODE_MASK (mode)) == 0
12079 && ((CONST_INT_P (op1)
12080 || (nonzero_bits (op1, tmode)
12081 & ~GET_MODE_MASK (mode)) == 0)));
12084 || ((num_sign_bit_copies (op0, tmode)
12085 > (unsigned int) (GET_MODE_PRECISION (tmode)
12086 - GET_MODE_PRECISION (mode)))
12087 && (num_sign_bit_copies (op1, tmode)
12088 > (unsigned int) (GET_MODE_PRECISION (tmode)
12089 - GET_MODE_PRECISION (mode)))))
12091 /* If OP0 is an AND and we don't have an AND in MODE either,
12092 make a new AND in the proper mode. */
12093 if (GET_CODE (op0) == AND
12094 && !have_insn_for (AND, mode))
12095 op0 = simplify_gen_binary (AND, tmode,
12096 gen_lowpart (tmode,
12098 gen_lowpart (tmode,
12104 op0 = simplify_gen_unary (ZERO_EXTEND, tmode, op0, mode);
12105 op1 = simplify_gen_unary (ZERO_EXTEND, tmode, op1, mode);
12109 op0 = simplify_gen_unary (SIGN_EXTEND, tmode, op0, mode);
12110 op1 = simplify_gen_unary (SIGN_EXTEND, tmode, op1, mode);
12117 #ifdef CANONICALIZE_COMPARISON
12118 /* If this machine only supports a subset of valid comparisons, see if we
12119 can convert an unsupported one into a supported one. */
12120 CANONICALIZE_COMPARISON (code, op0, op1);
12129 /* Utility function for record_value_for_reg. Count number of
12134 enum rtx_code code = GET_CODE (x);
12138 if (GET_RTX_CLASS (code) == '2'
12139 || GET_RTX_CLASS (code) == 'c')
12141 rtx x0 = XEXP (x, 0);
12142 rtx x1 = XEXP (x, 1);
12145 return 1 + 2 * count_rtxs (x0);
12147 if ((GET_RTX_CLASS (GET_CODE (x1)) == '2'
12148 || GET_RTX_CLASS (GET_CODE (x1)) == 'c')
12149 && (x0 == XEXP (x1, 0) || x0 == XEXP (x1, 1)))
12150 return 2 + 2 * count_rtxs (x0)
12151 + count_rtxs (x == XEXP (x1, 0)
12152 ? XEXP (x1, 1) : XEXP (x1, 0));
12154 if ((GET_RTX_CLASS (GET_CODE (x0)) == '2'
12155 || GET_RTX_CLASS (GET_CODE (x0)) == 'c')
12156 && (x1 == XEXP (x0, 0) || x1 == XEXP (x0, 1)))
12157 return 2 + 2 * count_rtxs (x1)
12158 + count_rtxs (x == XEXP (x0, 0)
12159 ? XEXP (x0, 1) : XEXP (x0, 0));
12162 fmt = GET_RTX_FORMAT (code);
12163 for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
12165 ret += count_rtxs (XEXP (x, i));
12166 else if (fmt[i] == 'E')
12167 for (j = 0; j < XVECLEN (x, i); j++)
12168 ret += count_rtxs (XVECEXP (x, i, j));
12173 /* Utility function for following routine. Called when X is part of a value
12174 being stored into last_set_value. Sets last_set_table_tick
12175 for each register mentioned. Similar to mention_regs in cse.c */
12178 update_table_tick (rtx x)
12180 enum rtx_code code = GET_CODE (x);
12181 const char *fmt = GET_RTX_FORMAT (code);
12186 unsigned int regno = REGNO (x);
12187 unsigned int endregno = END_REGNO (x);
12190 for (r = regno; r < endregno; r++)
12192 reg_stat_type *rsp = VEC_index (reg_stat_type, reg_stat, r);
12193 rsp->last_set_table_tick = label_tick;
12199 for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
12202 /* Check for identical subexpressions. If x contains
12203 identical subexpression we only have to traverse one of
12205 if (i == 0 && ARITHMETIC_P (x))
12207 /* Note that at this point x1 has already been
12209 rtx x0 = XEXP (x, 0);
12210 rtx x1 = XEXP (x, 1);
12212 /* If x0 and x1 are identical then there is no need to
12217 /* If x0 is identical to a subexpression of x1 then while
12218 processing x1, x0 has already been processed. Thus we
12219 are done with x. */
12220 if (ARITHMETIC_P (x1)
12221 && (x0 == XEXP (x1, 0) || x0 == XEXP (x1, 1)))
12224 /* If x1 is identical to a subexpression of x0 then we
12225 still have to process the rest of x0. */
12226 if (ARITHMETIC_P (x0)
12227 && (x1 == XEXP (x0, 0) || x1 == XEXP (x0, 1)))
12229 update_table_tick (XEXP (x0, x1 == XEXP (x0, 0) ? 1 : 0));
12234 update_table_tick (XEXP (x, i));
12236 else if (fmt[i] == 'E')
12237 for (j = 0; j < XVECLEN (x, i); j++)
12238 update_table_tick (XVECEXP (x, i, j));
12241 /* Record that REG is set to VALUE in insn INSN. If VALUE is zero, we
12242 are saying that the register is clobbered and we no longer know its
12243 value. If INSN is zero, don't update reg_stat[].last_set; this is
12244 only permitted with VALUE also zero and is used to invalidate the
12248 record_value_for_reg (rtx reg, rtx insn, rtx value)
12250 unsigned int regno = REGNO (reg);
12251 unsigned int endregno = END_REGNO (reg);
12253 reg_stat_type *rsp;
12255 /* If VALUE contains REG and we have a previous value for REG, substitute
12256 the previous value. */
12257 if (value && insn && reg_overlap_mentioned_p (reg, value))
12261 /* Set things up so get_last_value is allowed to see anything set up to
12263 subst_low_luid = DF_INSN_LUID (insn);
12264 tem = get_last_value (reg);
12266 /* If TEM is simply a binary operation with two CLOBBERs as operands,
12267 it isn't going to be useful and will take a lot of time to process,
12268 so just use the CLOBBER. */
12272 if (ARITHMETIC_P (tem)
12273 && GET_CODE (XEXP (tem, 0)) == CLOBBER
12274 && GET_CODE (XEXP (tem, 1)) == CLOBBER)
12275 tem = XEXP (tem, 0);
12276 else if (count_occurrences (value, reg, 1) >= 2)
12278 /* If there are two or more occurrences of REG in VALUE,
12279 prevent the value from growing too much. */
12280 if (count_rtxs (tem) > MAX_LAST_VALUE_RTL)
12281 tem = gen_rtx_CLOBBER (GET_MODE (tem), const0_rtx);
12284 value = replace_rtx (copy_rtx (value), reg, tem);
12288 /* For each register modified, show we don't know its value, that
12289 we don't know about its bitwise content, that its value has been
12290 updated, and that we don't know the location of the death of the
12292 for (i = regno; i < endregno; i++)
12294 rsp = VEC_index (reg_stat_type, reg_stat, i);
12297 rsp->last_set = insn;
12299 rsp->last_set_value = 0;
12300 rsp->last_set_mode = VOIDmode;
12301 rsp->last_set_nonzero_bits = 0;
12302 rsp->last_set_sign_bit_copies = 0;
12303 rsp->last_death = 0;
12304 rsp->truncated_to_mode = VOIDmode;
12307 /* Mark registers that are being referenced in this value. */
12309 update_table_tick (value);
12311 /* Now update the status of each register being set.
12312 If someone is using this register in this block, set this register
12313 to invalid since we will get confused between the two lives in this
12314 basic block. This makes using this register always invalid. In cse, we
12315 scan the table to invalidate all entries using this register, but this
12316 is too much work for us. */
12318 for (i = regno; i < endregno; i++)
12320 rsp = VEC_index (reg_stat_type, reg_stat, i);
12321 rsp->last_set_label = label_tick;
12323 || (value && rsp->last_set_table_tick >= label_tick_ebb_start))
12324 rsp->last_set_invalid = 1;
12326 rsp->last_set_invalid = 0;
12329 /* The value being assigned might refer to X (like in "x++;"). In that
12330 case, we must replace it with (clobber (const_int 0)) to prevent
12332 rsp = VEC_index (reg_stat_type, reg_stat, regno);
12333 if (value && !get_last_value_validate (&value, insn, label_tick, 0))
12335 value = copy_rtx (value);
12336 if (!get_last_value_validate (&value, insn, label_tick, 1))
12340 /* For the main register being modified, update the value, the mode, the
12341 nonzero bits, and the number of sign bit copies. */
12343 rsp->last_set_value = value;
12347 enum machine_mode mode = GET_MODE (reg);
12348 subst_low_luid = DF_INSN_LUID (insn);
12349 rsp->last_set_mode = mode;
12350 if (GET_MODE_CLASS (mode) == MODE_INT
12351 && HWI_COMPUTABLE_MODE_P (mode))
12352 mode = nonzero_bits_mode;
12353 rsp->last_set_nonzero_bits = nonzero_bits (value, mode);
12354 rsp->last_set_sign_bit_copies
12355 = num_sign_bit_copies (value, GET_MODE (reg));
12359 /* Called via note_stores from record_dead_and_set_regs to handle one
12360 SET or CLOBBER in an insn. DATA is the instruction in which the
12361 set is occurring. */
12364 record_dead_and_set_regs_1 (rtx dest, const_rtx setter, void *data)
12366 rtx record_dead_insn = (rtx) data;
12368 if (GET_CODE (dest) == SUBREG)
12369 dest = SUBREG_REG (dest);
12371 if (!record_dead_insn)
12374 record_value_for_reg (dest, NULL_RTX, NULL_RTX);
12380 /* If we are setting the whole register, we know its value. Otherwise
12381 show that we don't know the value. We can handle SUBREG in
12383 if (GET_CODE (setter) == SET && dest == SET_DEST (setter))
12384 record_value_for_reg (dest, record_dead_insn, SET_SRC (setter));
12385 else if (GET_CODE (setter) == SET
12386 && GET_CODE (SET_DEST (setter)) == SUBREG
12387 && SUBREG_REG (SET_DEST (setter)) == dest
12388 && GET_MODE_PRECISION (GET_MODE (dest)) <= BITS_PER_WORD
12389 && subreg_lowpart_p (SET_DEST (setter)))
12390 record_value_for_reg (dest, record_dead_insn,
12391 gen_lowpart (GET_MODE (dest),
12392 SET_SRC (setter)));
12394 record_value_for_reg (dest, record_dead_insn, NULL_RTX);
12396 else if (MEM_P (dest)
12397 /* Ignore pushes, they clobber nothing. */
12398 && ! push_operand (dest, GET_MODE (dest)))
12399 mem_last_set = DF_INSN_LUID (record_dead_insn);
12402 /* Update the records of when each REG was most recently set or killed
12403 for the things done by INSN. This is the last thing done in processing
12404 INSN in the combiner loop.
12406 We update reg_stat[], in particular fields last_set, last_set_value,
12407 last_set_mode, last_set_nonzero_bits, last_set_sign_bit_copies,
12408 last_death, and also the similar information mem_last_set (which insn
12409 most recently modified memory) and last_call_luid (which insn was the
12410 most recent subroutine call). */
12413 record_dead_and_set_regs (rtx insn)
12418 for (link = REG_NOTES (insn); link; link = XEXP (link, 1))
12420 if (REG_NOTE_KIND (link) == REG_DEAD
12421 && REG_P (XEXP (link, 0)))
12423 unsigned int regno = REGNO (XEXP (link, 0));
12424 unsigned int endregno = END_REGNO (XEXP (link, 0));
12426 for (i = regno; i < endregno; i++)
12428 reg_stat_type *rsp;
12430 rsp = VEC_index (reg_stat_type, reg_stat, i);
12431 rsp->last_death = insn;
12434 else if (REG_NOTE_KIND (link) == REG_INC)
12435 record_value_for_reg (XEXP (link, 0), insn, NULL_RTX);
12440 for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
12441 if (TEST_HARD_REG_BIT (regs_invalidated_by_call, i))
12443 reg_stat_type *rsp;
12445 rsp = VEC_index (reg_stat_type, reg_stat, i);
12446 rsp->last_set_invalid = 1;
12447 rsp->last_set = insn;
12448 rsp->last_set_value = 0;
12449 rsp->last_set_mode = VOIDmode;
12450 rsp->last_set_nonzero_bits = 0;
12451 rsp->last_set_sign_bit_copies = 0;
12452 rsp->last_death = 0;
12453 rsp->truncated_to_mode = VOIDmode;
12456 last_call_luid = mem_last_set = DF_INSN_LUID (insn);
12458 /* We can't combine into a call pattern. Remember, though, that
12459 the return value register is set at this LUID. We could
12460 still replace a register with the return value from the
12461 wrong subroutine call! */
12462 note_stores (PATTERN (insn), record_dead_and_set_regs_1, NULL_RTX);
12465 note_stores (PATTERN (insn), record_dead_and_set_regs_1, insn);
12468 /* If a SUBREG has the promoted bit set, it is in fact a property of the
12469 register present in the SUBREG, so for each such SUBREG go back and
12470 adjust nonzero and sign bit information of the registers that are
12471 known to have some zero/sign bits set.
12473 This is needed because when combine blows the SUBREGs away, the
12474 information on zero/sign bits is lost and further combines can be
12475 missed because of that. */
12478 record_promoted_value (rtx insn, rtx subreg)
12480 struct insn_link *links;
12482 unsigned int regno = REGNO (SUBREG_REG (subreg));
12483 enum machine_mode mode = GET_MODE (subreg);
12485 if (GET_MODE_PRECISION (mode) > HOST_BITS_PER_WIDE_INT)
12488 for (links = LOG_LINKS (insn); links;)
12490 reg_stat_type *rsp;
12492 insn = links->insn;
12493 set = single_set (insn);
12495 if (! set || !REG_P (SET_DEST (set))
12496 || REGNO (SET_DEST (set)) != regno
12497 || GET_MODE (SET_DEST (set)) != GET_MODE (SUBREG_REG (subreg)))
12499 links = links->next;
12503 rsp = VEC_index (reg_stat_type, reg_stat, regno);
12504 if (rsp->last_set == insn)
12506 if (SUBREG_PROMOTED_UNSIGNED_P (subreg) > 0)
12507 rsp->last_set_nonzero_bits &= GET_MODE_MASK (mode);
12510 if (REG_P (SET_SRC (set)))
12512 regno = REGNO (SET_SRC (set));
12513 links = LOG_LINKS (insn);
12520 /* Check if X, a register, is known to contain a value already
12521 truncated to MODE. In this case we can use a subreg to refer to
12522 the truncated value even though in the generic case we would need
12523 an explicit truncation. */
12526 reg_truncated_to_mode (enum machine_mode mode, const_rtx x)
12528 reg_stat_type *rsp = VEC_index (reg_stat_type, reg_stat, REGNO (x));
12529 enum machine_mode truncated = rsp->truncated_to_mode;
12532 || rsp->truncation_label < label_tick_ebb_start)
12534 if (GET_MODE_SIZE (truncated) <= GET_MODE_SIZE (mode))
12536 if (TRULY_NOOP_TRUNCATION_MODES_P (mode, truncated))
12541 /* Callback for for_each_rtx. If *P is a hard reg or a subreg record the mode
12542 that the register is accessed in. For non-TRULY_NOOP_TRUNCATION targets we
12543 might be able to turn a truncate into a subreg using this information.
12544 Return -1 if traversing *P is complete or 0 otherwise. */
12547 record_truncated_value (rtx *p, void *data ATTRIBUTE_UNUSED)
12550 enum machine_mode truncated_mode;
12551 reg_stat_type *rsp;
12553 if (GET_CODE (x) == SUBREG && REG_P (SUBREG_REG (x)))
12555 enum machine_mode original_mode = GET_MODE (SUBREG_REG (x));
12556 truncated_mode = GET_MODE (x);
12558 if (GET_MODE_SIZE (original_mode) <= GET_MODE_SIZE (truncated_mode))
12561 if (TRULY_NOOP_TRUNCATION_MODES_P (truncated_mode, original_mode))
12564 x = SUBREG_REG (x);
12566 /* ??? For hard-regs we now record everything. We might be able to
12567 optimize this using last_set_mode. */
12568 else if (REG_P (x) && REGNO (x) < FIRST_PSEUDO_REGISTER)
12569 truncated_mode = GET_MODE (x);
12573 rsp = VEC_index (reg_stat_type, reg_stat, REGNO (x));
12574 if (rsp->truncated_to_mode == 0
12575 || rsp->truncation_label < label_tick_ebb_start
12576 || (GET_MODE_SIZE (truncated_mode)
12577 < GET_MODE_SIZE (rsp->truncated_to_mode)))
12579 rsp->truncated_to_mode = truncated_mode;
12580 rsp->truncation_label = label_tick;
12586 /* Callback for note_uses. Find hardregs and subregs of pseudos and
12587 the modes they are used in. This can help truning TRUNCATEs into
12591 record_truncated_values (rtx *x, void *data ATTRIBUTE_UNUSED)
12593 for_each_rtx (x, record_truncated_value, NULL);
12596 /* Scan X for promoted SUBREGs. For each one found,
12597 note what it implies to the registers used in it. */
12600 check_promoted_subreg (rtx insn, rtx x)
12602 if (GET_CODE (x) == SUBREG
12603 && SUBREG_PROMOTED_VAR_P (x)
12604 && REG_P (SUBREG_REG (x)))
12605 record_promoted_value (insn, x);
12608 const char *format = GET_RTX_FORMAT (GET_CODE (x));
12611 for (i = 0; i < GET_RTX_LENGTH (GET_CODE (x)); i++)
12615 check_promoted_subreg (insn, XEXP (x, i));
12619 if (XVEC (x, i) != 0)
12620 for (j = 0; j < XVECLEN (x, i); j++)
12621 check_promoted_subreg (insn, XVECEXP (x, i, j));
12627 /* Verify that all the registers and memory references mentioned in *LOC are
12628 still valid. *LOC was part of a value set in INSN when label_tick was
12629 equal to TICK. Return 0 if some are not. If REPLACE is nonzero, replace
12630 the invalid references with (clobber (const_int 0)) and return 1. This
12631 replacement is useful because we often can get useful information about
12632 the form of a value (e.g., if it was produced by a shift that always
12633 produces -1 or 0) even though we don't know exactly what registers it
12634 was produced from. */
12637 get_last_value_validate (rtx *loc, rtx insn, int tick, int replace)
12640 const char *fmt = GET_RTX_FORMAT (GET_CODE (x));
12641 int len = GET_RTX_LENGTH (GET_CODE (x));
12646 unsigned int regno = REGNO (x);
12647 unsigned int endregno = END_REGNO (x);
12650 for (j = regno; j < endregno; j++)
12652 reg_stat_type *rsp = VEC_index (reg_stat_type, reg_stat, j);
12653 if (rsp->last_set_invalid
12654 /* If this is a pseudo-register that was only set once and not
12655 live at the beginning of the function, it is always valid. */
12656 || (! (regno >= FIRST_PSEUDO_REGISTER
12657 && REG_N_SETS (regno) == 1
12658 && (!REGNO_REG_SET_P
12659 (DF_LR_IN (ENTRY_BLOCK_PTR->next_bb), regno)))
12660 && rsp->last_set_label > tick))
12663 *loc = gen_rtx_CLOBBER (GET_MODE (x), const0_rtx);
12670 /* If this is a memory reference, make sure that there were no stores after
12671 it that might have clobbered the value. We don't have alias info, so we
12672 assume any store invalidates it. Moreover, we only have local UIDs, so
12673 we also assume that there were stores in the intervening basic blocks. */
12674 else if (MEM_P (x) && !MEM_READONLY_P (x)
12675 && (tick != label_tick || DF_INSN_LUID (insn) <= mem_last_set))
12678 *loc = gen_rtx_CLOBBER (GET_MODE (x), const0_rtx);
12682 for (i = 0; i < len; i++)
12686 /* Check for identical subexpressions. If x contains
12687 identical subexpression we only have to traverse one of
12689 if (i == 1 && ARITHMETIC_P (x))
12691 /* Note that at this point x0 has already been checked
12692 and found valid. */
12693 rtx x0 = XEXP (x, 0);
12694 rtx x1 = XEXP (x, 1);
12696 /* If x0 and x1 are identical then x is also valid. */
12700 /* If x1 is identical to a subexpression of x0 then
12701 while checking x0, x1 has already been checked. Thus
12702 it is valid and so as x. */
12703 if (ARITHMETIC_P (x0)
12704 && (x1 == XEXP (x0, 0) || x1 == XEXP (x0, 1)))
12707 /* If x0 is identical to a subexpression of x1 then x is
12708 valid iff the rest of x1 is valid. */
12709 if (ARITHMETIC_P (x1)
12710 && (x0 == XEXP (x1, 0) || x0 == XEXP (x1, 1)))
12712 get_last_value_validate (&XEXP (x1,
12713 x0 == XEXP (x1, 0) ? 1 : 0),
12714 insn, tick, replace);
12717 if (get_last_value_validate (&XEXP (x, i), insn, tick,
12721 else if (fmt[i] == 'E')
12722 for (j = 0; j < XVECLEN (x, i); j++)
12723 if (get_last_value_validate (&XVECEXP (x, i, j),
12724 insn, tick, replace) == 0)
12728 /* If we haven't found a reason for it to be invalid, it is valid. */
12732 /* Get the last value assigned to X, if known. Some registers
12733 in the value may be replaced with (clobber (const_int 0)) if their value
12734 is known longer known reliably. */
12737 get_last_value (const_rtx x)
12739 unsigned int regno;
12741 reg_stat_type *rsp;
12743 /* If this is a non-paradoxical SUBREG, get the value of its operand and
12744 then convert it to the desired mode. If this is a paradoxical SUBREG,
12745 we cannot predict what values the "extra" bits might have. */
12746 if (GET_CODE (x) == SUBREG
12747 && subreg_lowpart_p (x)
12748 && !paradoxical_subreg_p (x)
12749 && (value = get_last_value (SUBREG_REG (x))) != 0)
12750 return gen_lowpart (GET_MODE (x), value);
12756 rsp = VEC_index (reg_stat_type, reg_stat, regno);
12757 value = rsp->last_set_value;
12759 /* If we don't have a value, or if it isn't for this basic block and
12760 it's either a hard register, set more than once, or it's a live
12761 at the beginning of the function, return 0.
12763 Because if it's not live at the beginning of the function then the reg
12764 is always set before being used (is never used without being set).
12765 And, if it's set only once, and it's always set before use, then all
12766 uses must have the same last value, even if it's not from this basic
12770 || (rsp->last_set_label < label_tick_ebb_start
12771 && (regno < FIRST_PSEUDO_REGISTER
12772 || REG_N_SETS (regno) != 1
12774 (DF_LR_IN (ENTRY_BLOCK_PTR->next_bb), regno))))
12777 /* If the value was set in a later insn than the ones we are processing,
12778 we can't use it even if the register was only set once. */
12779 if (rsp->last_set_label == label_tick
12780 && DF_INSN_LUID (rsp->last_set) >= subst_low_luid)
12783 /* If the value has all its registers valid, return it. */
12784 if (get_last_value_validate (&value, rsp->last_set, rsp->last_set_label, 0))
12787 /* Otherwise, make a copy and replace any invalid register with
12788 (clobber (const_int 0)). If that fails for some reason, return 0. */
12790 value = copy_rtx (value);
12791 if (get_last_value_validate (&value, rsp->last_set, rsp->last_set_label, 1))
12797 /* Return nonzero if expression X refers to a REG or to memory
12798 that is set in an instruction more recent than FROM_LUID. */
12801 use_crosses_set_p (const_rtx x, int from_luid)
12805 enum rtx_code code = GET_CODE (x);
12809 unsigned int regno = REGNO (x);
12810 unsigned endreg = END_REGNO (x);
12812 #ifdef PUSH_ROUNDING
12813 /* Don't allow uses of the stack pointer to be moved,
12814 because we don't know whether the move crosses a push insn. */
12815 if (regno == STACK_POINTER_REGNUM && PUSH_ARGS)
12818 for (; regno < endreg; regno++)
12820 reg_stat_type *rsp = VEC_index (reg_stat_type, reg_stat, regno);
12822 && rsp->last_set_label == label_tick
12823 && DF_INSN_LUID (rsp->last_set) > from_luid)
12829 if (code == MEM && mem_last_set > from_luid)
12832 fmt = GET_RTX_FORMAT (code);
12834 for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
12839 for (j = XVECLEN (x, i) - 1; j >= 0; j--)
12840 if (use_crosses_set_p (XVECEXP (x, i, j), from_luid))
12843 else if (fmt[i] == 'e'
12844 && use_crosses_set_p (XEXP (x, i), from_luid))
12850 /* Define three variables used for communication between the following
12853 static unsigned int reg_dead_regno, reg_dead_endregno;
12854 static int reg_dead_flag;
12856 /* Function called via note_stores from reg_dead_at_p.
12858 If DEST is within [reg_dead_regno, reg_dead_endregno), set
12859 reg_dead_flag to 1 if X is a CLOBBER and to -1 it is a SET. */
12862 reg_dead_at_p_1 (rtx dest, const_rtx x, void *data ATTRIBUTE_UNUSED)
12864 unsigned int regno, endregno;
12869 regno = REGNO (dest);
12870 endregno = END_REGNO (dest);
12871 if (reg_dead_endregno > regno && reg_dead_regno < endregno)
12872 reg_dead_flag = (GET_CODE (x) == CLOBBER) ? 1 : -1;
12875 /* Return nonzero if REG is known to be dead at INSN.
12877 We scan backwards from INSN. If we hit a REG_DEAD note or a CLOBBER
12878 referencing REG, it is dead. If we hit a SET referencing REG, it is
12879 live. Otherwise, see if it is live or dead at the start of the basic
12880 block we are in. Hard regs marked as being live in NEWPAT_USED_REGS
12881 must be assumed to be always live. */
12884 reg_dead_at_p (rtx reg, rtx insn)
12889 /* Set variables for reg_dead_at_p_1. */
12890 reg_dead_regno = REGNO (reg);
12891 reg_dead_endregno = END_REGNO (reg);
12895 /* Check that reg isn't mentioned in NEWPAT_USED_REGS. For fixed registers
12896 we allow the machine description to decide whether use-and-clobber
12897 patterns are OK. */
12898 if (reg_dead_regno < FIRST_PSEUDO_REGISTER)
12900 for (i = reg_dead_regno; i < reg_dead_endregno; i++)
12901 if (!fixed_regs[i] && TEST_HARD_REG_BIT (newpat_used_regs, i))
12905 /* Scan backwards until we find a REG_DEAD note, SET, CLOBBER, or
12906 beginning of basic block. */
12907 block = BLOCK_FOR_INSN (insn);
12912 note_stores (PATTERN (insn), reg_dead_at_p_1, NULL);
12914 return reg_dead_flag == 1 ? 1 : 0;
12916 if (find_regno_note (insn, REG_DEAD, reg_dead_regno))
12920 if (insn == BB_HEAD (block))
12923 insn = PREV_INSN (insn);
12926 /* Look at live-in sets for the basic block that we were in. */
12927 for (i = reg_dead_regno; i < reg_dead_endregno; i++)
12928 if (REGNO_REG_SET_P (df_get_live_in (block), i))
12934 /* Note hard registers in X that are used. */
12937 mark_used_regs_combine (rtx x)
12939 RTX_CODE code = GET_CODE (x);
12940 unsigned int regno;
12953 case ADDR_DIFF_VEC:
12956 /* CC0 must die in the insn after it is set, so we don't need to take
12957 special note of it here. */
12963 /* If we are clobbering a MEM, mark any hard registers inside the
12964 address as used. */
12965 if (MEM_P (XEXP (x, 0)))
12966 mark_used_regs_combine (XEXP (XEXP (x, 0), 0));
12971 /* A hard reg in a wide mode may really be multiple registers.
12972 If so, mark all of them just like the first. */
12973 if (regno < FIRST_PSEUDO_REGISTER)
12975 /* None of this applies to the stack, frame or arg pointers. */
12976 if (regno == STACK_POINTER_REGNUM
12977 #if !HARD_FRAME_POINTER_IS_FRAME_POINTER
12978 || regno == HARD_FRAME_POINTER_REGNUM
12980 #if FRAME_POINTER_REGNUM != ARG_POINTER_REGNUM
12981 || (regno == ARG_POINTER_REGNUM && fixed_regs[regno])
12983 || regno == FRAME_POINTER_REGNUM)
12986 add_to_hard_reg_set (&newpat_used_regs, GET_MODE (x), regno);
12992 /* If setting a MEM, or a SUBREG of a MEM, then note any hard regs in
12994 rtx testreg = SET_DEST (x);
12996 while (GET_CODE (testreg) == SUBREG
12997 || GET_CODE (testreg) == ZERO_EXTRACT
12998 || GET_CODE (testreg) == STRICT_LOW_PART)
12999 testreg = XEXP (testreg, 0);
13001 if (MEM_P (testreg))
13002 mark_used_regs_combine (XEXP (testreg, 0));
13004 mark_used_regs_combine (SET_SRC (x));
13012 /* Recursively scan the operands of this expression. */
13015 const char *fmt = GET_RTX_FORMAT (code);
13017 for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
13020 mark_used_regs_combine (XEXP (x, i));
13021 else if (fmt[i] == 'E')
13025 for (j = 0; j < XVECLEN (x, i); j++)
13026 mark_used_regs_combine (XVECEXP (x, i, j));
13032 /* Remove register number REGNO from the dead registers list of INSN.
13034 Return the note used to record the death, if there was one. */
13037 remove_death (unsigned int regno, rtx insn)
13039 rtx note = find_regno_note (insn, REG_DEAD, regno);
13042 remove_note (insn, note);
13047 /* For each register (hardware or pseudo) used within expression X, if its
13048 death is in an instruction with luid between FROM_LUID (inclusive) and
13049 TO_INSN (exclusive), put a REG_DEAD note for that register in the
13050 list headed by PNOTES.
13052 That said, don't move registers killed by maybe_kill_insn.
13054 This is done when X is being merged by combination into TO_INSN. These
13055 notes will then be distributed as needed. */
13058 move_deaths (rtx x, rtx maybe_kill_insn, int from_luid, rtx to_insn,
13063 enum rtx_code code = GET_CODE (x);
13067 unsigned int regno = REGNO (x);
13068 rtx where_dead = VEC_index (reg_stat_type, reg_stat, regno)->last_death;
13070 /* Don't move the register if it gets killed in between from and to. */
13071 if (maybe_kill_insn && reg_set_p (x, maybe_kill_insn)
13072 && ! reg_referenced_p (x, maybe_kill_insn))
13076 && BLOCK_FOR_INSN (where_dead) == BLOCK_FOR_INSN (to_insn)
13077 && DF_INSN_LUID (where_dead) >= from_luid
13078 && DF_INSN_LUID (where_dead) < DF_INSN_LUID (to_insn))
13080 rtx note = remove_death (regno, where_dead);
13082 /* It is possible for the call above to return 0. This can occur
13083 when last_death points to I2 or I1 that we combined with.
13084 In that case make a new note.
13086 We must also check for the case where X is a hard register
13087 and NOTE is a death note for a range of hard registers
13088 including X. In that case, we must put REG_DEAD notes for
13089 the remaining registers in place of NOTE. */
13091 if (note != 0 && regno < FIRST_PSEUDO_REGISTER
13092 && (GET_MODE_SIZE (GET_MODE (XEXP (note, 0)))
13093 > GET_MODE_SIZE (GET_MODE (x))))
13095 unsigned int deadregno = REGNO (XEXP (note, 0));
13096 unsigned int deadend = END_HARD_REGNO (XEXP (note, 0));
13097 unsigned int ourend = END_HARD_REGNO (x);
13100 for (i = deadregno; i < deadend; i++)
13101 if (i < regno || i >= ourend)
13102 add_reg_note (where_dead, REG_DEAD, regno_reg_rtx[i]);
13105 /* If we didn't find any note, or if we found a REG_DEAD note that
13106 covers only part of the given reg, and we have a multi-reg hard
13107 register, then to be safe we must check for REG_DEAD notes
13108 for each register other than the first. They could have
13109 their own REG_DEAD notes lying around. */
13110 else if ((note == 0
13112 && (GET_MODE_SIZE (GET_MODE (XEXP (note, 0)))
13113 < GET_MODE_SIZE (GET_MODE (x)))))
13114 && regno < FIRST_PSEUDO_REGISTER
13115 && hard_regno_nregs[regno][GET_MODE (x)] > 1)
13117 unsigned int ourend = END_HARD_REGNO (x);
13118 unsigned int i, offset;
13122 offset = hard_regno_nregs[regno][GET_MODE (XEXP (note, 0))];
13126 for (i = regno + offset; i < ourend; i++)
13127 move_deaths (regno_reg_rtx[i],
13128 maybe_kill_insn, from_luid, to_insn, &oldnotes);
13131 if (note != 0 && GET_MODE (XEXP (note, 0)) == GET_MODE (x))
13133 XEXP (note, 1) = *pnotes;
13137 *pnotes = alloc_reg_note (REG_DEAD, x, *pnotes);
13143 else if (GET_CODE (x) == SET)
13145 rtx dest = SET_DEST (x);
13147 move_deaths (SET_SRC (x), maybe_kill_insn, from_luid, to_insn, pnotes);
13149 /* In the case of a ZERO_EXTRACT, a STRICT_LOW_PART, or a SUBREG
13150 that accesses one word of a multi-word item, some
13151 piece of everything register in the expression is used by
13152 this insn, so remove any old death. */
13153 /* ??? So why do we test for equality of the sizes? */
13155 if (GET_CODE (dest) == ZERO_EXTRACT
13156 || GET_CODE (dest) == STRICT_LOW_PART
13157 || (GET_CODE (dest) == SUBREG
13158 && (((GET_MODE_SIZE (GET_MODE (dest))
13159 + UNITS_PER_WORD - 1) / UNITS_PER_WORD)
13160 == ((GET_MODE_SIZE (GET_MODE (SUBREG_REG (dest)))
13161 + UNITS_PER_WORD - 1) / UNITS_PER_WORD))))
13163 move_deaths (dest, maybe_kill_insn, from_luid, to_insn, pnotes);
13167 /* If this is some other SUBREG, we know it replaces the entire
13168 value, so use that as the destination. */
13169 if (GET_CODE (dest) == SUBREG)
13170 dest = SUBREG_REG (dest);
13172 /* If this is a MEM, adjust deaths of anything used in the address.
13173 For a REG (the only other possibility), the entire value is
13174 being replaced so the old value is not used in this insn. */
13177 move_deaths (XEXP (dest, 0), maybe_kill_insn, from_luid,
13182 else if (GET_CODE (x) == CLOBBER)
13185 len = GET_RTX_LENGTH (code);
13186 fmt = GET_RTX_FORMAT (code);
13188 for (i = 0; i < len; i++)
13193 for (j = XVECLEN (x, i) - 1; j >= 0; j--)
13194 move_deaths (XVECEXP (x, i, j), maybe_kill_insn, from_luid,
13197 else if (fmt[i] == 'e')
13198 move_deaths (XEXP (x, i), maybe_kill_insn, from_luid, to_insn, pnotes);
13202 /* Return 1 if X is the target of a bit-field assignment in BODY, the
13203 pattern of an insn. X must be a REG. */
13206 reg_bitfield_target_p (rtx x, rtx body)
13210 if (GET_CODE (body) == SET)
13212 rtx dest = SET_DEST (body);
13214 unsigned int regno, tregno, endregno, endtregno;
13216 if (GET_CODE (dest) == ZERO_EXTRACT)
13217 target = XEXP (dest, 0);
13218 else if (GET_CODE (dest) == STRICT_LOW_PART)
13219 target = SUBREG_REG (XEXP (dest, 0));
13223 if (GET_CODE (target) == SUBREG)
13224 target = SUBREG_REG (target);
13226 if (!REG_P (target))
13229 tregno = REGNO (target), regno = REGNO (x);
13230 if (tregno >= FIRST_PSEUDO_REGISTER || regno >= FIRST_PSEUDO_REGISTER)
13231 return target == x;
13233 endtregno = end_hard_regno (GET_MODE (target), tregno);
13234 endregno = end_hard_regno (GET_MODE (x), regno);
13236 return endregno > tregno && regno < endtregno;
13239 else if (GET_CODE (body) == PARALLEL)
13240 for (i = XVECLEN (body, 0) - 1; i >= 0; i--)
13241 if (reg_bitfield_target_p (x, XVECEXP (body, 0, i)))
13247 /* Given a chain of REG_NOTES originally from FROM_INSN, try to place them
13248 as appropriate. I3 and I2 are the insns resulting from the combination
13249 insns including FROM (I2 may be zero).
13251 ELIM_I2 and ELIM_I1 are either zero or registers that we know will
13252 not need REG_DEAD notes because they are being substituted for. This
13253 saves searching in the most common cases.
13255 Each note in the list is either ignored or placed on some insns, depending
13256 on the type of note. */
13259 distribute_notes (rtx notes, rtx from_insn, rtx i3, rtx i2, rtx elim_i2,
13260 rtx elim_i1, rtx elim_i0)
13262 rtx note, next_note;
13265 for (note = notes; note; note = next_note)
13267 rtx place = 0, place2 = 0;
13269 next_note = XEXP (note, 1);
13270 switch (REG_NOTE_KIND (note))
13274 /* Doesn't matter much where we put this, as long as it's somewhere.
13275 It is preferable to keep these notes on branches, which is most
13276 likely to be i3. */
13280 case REG_NON_LOCAL_GOTO:
13285 gcc_assert (i2 && JUMP_P (i2));
13290 case REG_EH_REGION:
13291 /* These notes must remain with the call or trapping instruction. */
13294 else if (i2 && CALL_P (i2))
13298 gcc_assert (cfun->can_throw_non_call_exceptions);
13299 if (may_trap_p (i3))
13301 else if (i2 && may_trap_p (i2))
13303 /* ??? Otherwise assume we've combined things such that we
13304 can now prove that the instructions can't trap. Drop the
13305 note in this case. */
13309 case REG_ARGS_SIZE:
13310 /* ??? How to distribute between i3-i1. Assume i3 contains the
13311 entire adjustment. Assert i3 contains at least some adjust. */
13312 if (!noop_move_p (i3))
13314 int old_size, args_size = INTVAL (XEXP (note, 0));
13315 /* fixup_args_size_notes looks at REG_NORETURN note,
13316 so ensure the note is placed there first. */
13320 for (np = &next_note; *np; np = &XEXP (*np, 1))
13321 if (REG_NOTE_KIND (*np) == REG_NORETURN)
13325 XEXP (n, 1) = REG_NOTES (i3);
13326 REG_NOTES (i3) = n;
13330 old_size = fixup_args_size_notes (PREV_INSN (i3), i3, args_size);
13331 /* emit_call_1 adds for !ACCUMULATE_OUTGOING_ARGS
13332 REG_ARGS_SIZE note to all noreturn calls, allow that here. */
13333 gcc_assert (old_size != args_size
13335 && !ACCUMULATE_OUTGOING_ARGS
13336 && find_reg_note (i3, REG_NORETURN, NULL_RTX)));
13343 /* These notes must remain with the call. It should not be
13344 possible for both I2 and I3 to be a call. */
13349 gcc_assert (i2 && CALL_P (i2));
13355 /* Any clobbers for i3 may still exist, and so we must process
13356 REG_UNUSED notes from that insn.
13358 Any clobbers from i2 or i1 can only exist if they were added by
13359 recog_for_combine. In that case, recog_for_combine created the
13360 necessary REG_UNUSED notes. Trying to keep any original
13361 REG_UNUSED notes from these insns can cause incorrect output
13362 if it is for the same register as the original i3 dest.
13363 In that case, we will notice that the register is set in i3,
13364 and then add a REG_UNUSED note for the destination of i3, which
13365 is wrong. However, it is possible to have REG_UNUSED notes from
13366 i2 or i1 for register which were both used and clobbered, so
13367 we keep notes from i2 or i1 if they will turn into REG_DEAD
13370 /* If this register is set or clobbered in I3, put the note there
13371 unless there is one already. */
13372 if (reg_set_p (XEXP (note, 0), PATTERN (i3)))
13374 if (from_insn != i3)
13377 if (! (REG_P (XEXP (note, 0))
13378 ? find_regno_note (i3, REG_UNUSED, REGNO (XEXP (note, 0)))
13379 : find_reg_note (i3, REG_UNUSED, XEXP (note, 0))))
13382 /* Otherwise, if this register is used by I3, then this register
13383 now dies here, so we must put a REG_DEAD note here unless there
13385 else if (reg_referenced_p (XEXP (note, 0), PATTERN (i3))
13386 && ! (REG_P (XEXP (note, 0))
13387 ? find_regno_note (i3, REG_DEAD,
13388 REGNO (XEXP (note, 0)))
13389 : find_reg_note (i3, REG_DEAD, XEXP (note, 0))))
13391 PUT_REG_NOTE_KIND (note, REG_DEAD);
13399 /* These notes say something about results of an insn. We can
13400 only support them if they used to be on I3 in which case they
13401 remain on I3. Otherwise they are ignored.
13403 If the note refers to an expression that is not a constant, we
13404 must also ignore the note since we cannot tell whether the
13405 equivalence is still true. It might be possible to do
13406 slightly better than this (we only have a problem if I2DEST
13407 or I1DEST is present in the expression), but it doesn't
13408 seem worth the trouble. */
13410 if (from_insn == i3
13411 && (XEXP (note, 0) == 0 || CONSTANT_P (XEXP (note, 0))))
13416 /* These notes say something about how a register is used. They must
13417 be present on any use of the register in I2 or I3. */
13418 if (reg_mentioned_p (XEXP (note, 0), PATTERN (i3)))
13421 if (i2 && reg_mentioned_p (XEXP (note, 0), PATTERN (i2)))
13430 case REG_LABEL_TARGET:
13431 case REG_LABEL_OPERAND:
13432 /* This can show up in several ways -- either directly in the
13433 pattern, or hidden off in the constant pool with (or without?)
13434 a REG_EQUAL note. */
13435 /* ??? Ignore the without-reg_equal-note problem for now. */
13436 if (reg_mentioned_p (XEXP (note, 0), PATTERN (i3))
13437 || ((tem = find_reg_note (i3, REG_EQUAL, NULL_RTX))
13438 && GET_CODE (XEXP (tem, 0)) == LABEL_REF
13439 && XEXP (XEXP (tem, 0), 0) == XEXP (note, 0)))
13443 && (reg_mentioned_p (XEXP (note, 0), PATTERN (i2))
13444 || ((tem = find_reg_note (i2, REG_EQUAL, NULL_RTX))
13445 && GET_CODE (XEXP (tem, 0)) == LABEL_REF
13446 && XEXP (XEXP (tem, 0), 0) == XEXP (note, 0))))
13454 /* For REG_LABEL_TARGET on a JUMP_P, we prefer to put the note
13455 as a JUMP_LABEL or decrement LABEL_NUSES if it's already
13457 if (place && JUMP_P (place)
13458 && REG_NOTE_KIND (note) == REG_LABEL_TARGET
13459 && (JUMP_LABEL (place) == NULL
13460 || JUMP_LABEL (place) == XEXP (note, 0)))
13462 rtx label = JUMP_LABEL (place);
13465 JUMP_LABEL (place) = XEXP (note, 0);
13466 else if (LABEL_P (label))
13467 LABEL_NUSES (label)--;
13470 if (place2 && JUMP_P (place2)
13471 && REG_NOTE_KIND (note) == REG_LABEL_TARGET
13472 && (JUMP_LABEL (place2) == NULL
13473 || JUMP_LABEL (place2) == XEXP (note, 0)))
13475 rtx label = JUMP_LABEL (place2);
13478 JUMP_LABEL (place2) = XEXP (note, 0);
13479 else if (LABEL_P (label))
13480 LABEL_NUSES (label)--;
13486 /* This note says something about the value of a register prior
13487 to the execution of an insn. It is too much trouble to see
13488 if the note is still correct in all situations. It is better
13489 to simply delete it. */
13493 /* If we replaced the right hand side of FROM_INSN with a
13494 REG_EQUAL note, the original use of the dying register
13495 will not have been combined into I3 and I2. In such cases,
13496 FROM_INSN is guaranteed to be the first of the combined
13497 instructions, so we simply need to search back before
13498 FROM_INSN for the previous use or set of this register,
13499 then alter the notes there appropriately.
13501 If the register is used as an input in I3, it dies there.
13502 Similarly for I2, if it is nonzero and adjacent to I3.
13504 If the register is not used as an input in either I3 or I2
13505 and it is not one of the registers we were supposed to eliminate,
13506 there are two possibilities. We might have a non-adjacent I2
13507 or we might have somehow eliminated an additional register
13508 from a computation. For example, we might have had A & B where
13509 we discover that B will always be zero. In this case we will
13510 eliminate the reference to A.
13512 In both cases, we must search to see if we can find a previous
13513 use of A and put the death note there. */
13516 && from_insn == i2mod
13517 && !reg_overlap_mentioned_p (XEXP (note, 0), i2mod_new_rhs))
13522 && CALL_P (from_insn)
13523 && find_reg_fusage (from_insn, USE, XEXP (note, 0)))
13525 else if (reg_referenced_p (XEXP (note, 0), PATTERN (i3)))
13527 else if (i2 != 0 && next_nonnote_nondebug_insn (i2) == i3
13528 && reg_referenced_p (XEXP (note, 0), PATTERN (i2)))
13530 else if ((rtx_equal_p (XEXP (note, 0), elim_i2)
13532 && reg_overlap_mentioned_p (XEXP (note, 0),
13534 || rtx_equal_p (XEXP (note, 0), elim_i1)
13535 || rtx_equal_p (XEXP (note, 0), elim_i0))
13542 basic_block bb = this_basic_block;
13544 for (tem = PREV_INSN (tem); place == 0; tem = PREV_INSN (tem))
13546 if (!NONDEBUG_INSN_P (tem))
13548 if (tem == BB_HEAD (bb))
13553 /* If the register is being set at TEM, see if that is all
13554 TEM is doing. If so, delete TEM. Otherwise, make this
13555 into a REG_UNUSED note instead. Don't delete sets to
13556 global register vars. */
13557 if ((REGNO (XEXP (note, 0)) >= FIRST_PSEUDO_REGISTER
13558 || !global_regs[REGNO (XEXP (note, 0))])
13559 && reg_set_p (XEXP (note, 0), PATTERN (tem)))
13561 rtx set = single_set (tem);
13562 rtx inner_dest = 0;
13564 rtx cc0_setter = NULL_RTX;
13568 for (inner_dest = SET_DEST (set);
13569 (GET_CODE (inner_dest) == STRICT_LOW_PART
13570 || GET_CODE (inner_dest) == SUBREG
13571 || GET_CODE (inner_dest) == ZERO_EXTRACT);
13572 inner_dest = XEXP (inner_dest, 0))
13575 /* Verify that it was the set, and not a clobber that
13576 modified the register.
13578 CC0 targets must be careful to maintain setter/user
13579 pairs. If we cannot delete the setter due to side
13580 effects, mark the user with an UNUSED note instead
13583 if (set != 0 && ! side_effects_p (SET_SRC (set))
13584 && rtx_equal_p (XEXP (note, 0), inner_dest)
13586 && (! reg_mentioned_p (cc0_rtx, SET_SRC (set))
13587 || ((cc0_setter = prev_cc0_setter (tem)) != NULL
13588 && sets_cc0_p (PATTERN (cc0_setter)) > 0))
13592 /* Move the notes and links of TEM elsewhere.
13593 This might delete other dead insns recursively.
13594 First set the pattern to something that won't use
13596 rtx old_notes = REG_NOTES (tem);
13598 PATTERN (tem) = pc_rtx;
13599 REG_NOTES (tem) = NULL;
13601 distribute_notes (old_notes, tem, tem, NULL_RTX,
13602 NULL_RTX, NULL_RTX, NULL_RTX);
13603 distribute_links (LOG_LINKS (tem));
13605 SET_INSN_DELETED (tem);
13610 /* Delete the setter too. */
13613 PATTERN (cc0_setter) = pc_rtx;
13614 old_notes = REG_NOTES (cc0_setter);
13615 REG_NOTES (cc0_setter) = NULL;
13617 distribute_notes (old_notes, cc0_setter,
13618 cc0_setter, NULL_RTX,
13619 NULL_RTX, NULL_RTX, NULL_RTX);
13620 distribute_links (LOG_LINKS (cc0_setter));
13622 SET_INSN_DELETED (cc0_setter);
13623 if (cc0_setter == i2)
13630 PUT_REG_NOTE_KIND (note, REG_UNUSED);
13632 /* If there isn't already a REG_UNUSED note, put one
13633 here. Do not place a REG_DEAD note, even if
13634 the register is also used here; that would not
13635 match the algorithm used in lifetime analysis
13636 and can cause the consistency check in the
13637 scheduler to fail. */
13638 if (! find_regno_note (tem, REG_UNUSED,
13639 REGNO (XEXP (note, 0))))
13644 else if (reg_referenced_p (XEXP (note, 0), PATTERN (tem))
13646 && find_reg_fusage (tem, USE, XEXP (note, 0))))
13650 /* If we are doing a 3->2 combination, and we have a
13651 register which formerly died in i3 and was not used
13652 by i2, which now no longer dies in i3 and is used in
13653 i2 but does not die in i2, and place is between i2
13654 and i3, then we may need to move a link from place to
13656 if (i2 && DF_INSN_LUID (place) > DF_INSN_LUID (i2)
13658 && DF_INSN_LUID (from_insn) > DF_INSN_LUID (i2)
13659 && reg_referenced_p (XEXP (note, 0), PATTERN (i2)))
13661 struct insn_link *links = LOG_LINKS (place);
13662 LOG_LINKS (place) = NULL;
13663 distribute_links (links);
13668 if (tem == BB_HEAD (bb))
13674 /* If the register is set or already dead at PLACE, we needn't do
13675 anything with this note if it is still a REG_DEAD note.
13676 We check here if it is set at all, not if is it totally replaced,
13677 which is what `dead_or_set_p' checks, so also check for it being
13680 if (place && REG_NOTE_KIND (note) == REG_DEAD)
13682 unsigned int regno = REGNO (XEXP (note, 0));
13683 reg_stat_type *rsp = VEC_index (reg_stat_type, reg_stat, regno);
13685 if (dead_or_set_p (place, XEXP (note, 0))
13686 || reg_bitfield_target_p (XEXP (note, 0), PATTERN (place)))
13688 /* Unless the register previously died in PLACE, clear
13689 last_death. [I no longer understand why this is
13691 if (rsp->last_death != place)
13692 rsp->last_death = 0;
13696 rsp->last_death = place;
13698 /* If this is a death note for a hard reg that is occupying
13699 multiple registers, ensure that we are still using all
13700 parts of the object. If we find a piece of the object
13701 that is unused, we must arrange for an appropriate REG_DEAD
13702 note to be added for it. However, we can't just emit a USE
13703 and tag the note to it, since the register might actually
13704 be dead; so we recourse, and the recursive call then finds
13705 the previous insn that used this register. */
13707 if (place && regno < FIRST_PSEUDO_REGISTER
13708 && hard_regno_nregs[regno][GET_MODE (XEXP (note, 0))] > 1)
13710 unsigned int endregno = END_HARD_REGNO (XEXP (note, 0));
13714 for (i = regno; i < endregno; i++)
13715 if ((! refers_to_regno_p (i, i + 1, PATTERN (place), 0)
13716 && ! find_regno_fusage (place, USE, i))
13717 || dead_or_set_regno_p (place, i))
13722 /* Put only REG_DEAD notes for pieces that are
13723 not already dead or set. */
13725 for (i = regno; i < endregno;
13726 i += hard_regno_nregs[i][reg_raw_mode[i]])
13728 rtx piece = regno_reg_rtx[i];
13729 basic_block bb = this_basic_block;
13731 if (! dead_or_set_p (place, piece)
13732 && ! reg_bitfield_target_p (piece,
13735 rtx new_note = alloc_reg_note (REG_DEAD, piece,
13738 distribute_notes (new_note, place, place,
13739 NULL_RTX, NULL_RTX, NULL_RTX,
13742 else if (! refers_to_regno_p (i, i + 1,
13743 PATTERN (place), 0)
13744 && ! find_regno_fusage (place, USE, i))
13745 for (tem = PREV_INSN (place); ;
13746 tem = PREV_INSN (tem))
13748 if (!NONDEBUG_INSN_P (tem))
13750 if (tem == BB_HEAD (bb))
13754 if (dead_or_set_p (tem, piece)
13755 || reg_bitfield_target_p (piece,
13758 add_reg_note (tem, REG_UNUSED, piece);
13772 /* Any other notes should not be present at this point in the
13774 gcc_unreachable ();
13779 XEXP (note, 1) = REG_NOTES (place);
13780 REG_NOTES (place) = note;
13784 add_reg_note (place2, REG_NOTE_KIND (note), XEXP (note, 0));
13788 /* Similarly to above, distribute the LOG_LINKS that used to be present on
13789 I3, I2, and I1 to new locations. This is also called to add a link
13790 pointing at I3 when I3's destination is changed. */
13793 distribute_links (struct insn_link *links)
13795 struct insn_link *link, *next_link;
13797 for (link = links; link; link = next_link)
13803 next_link = link->next;
13805 /* If the insn that this link points to is a NOTE or isn't a single
13806 set, ignore it. In the latter case, it isn't clear what we
13807 can do other than ignore the link, since we can't tell which
13808 register it was for. Such links wouldn't be used by combine
13811 It is not possible for the destination of the target of the link to
13812 have been changed by combine. The only potential of this is if we
13813 replace I3, I2, and I1 by I3 and I2. But in that case the
13814 destination of I2 also remains unchanged. */
13816 if (NOTE_P (link->insn)
13817 || (set = single_set (link->insn)) == 0)
13820 reg = SET_DEST (set);
13821 while (GET_CODE (reg) == SUBREG || GET_CODE (reg) == ZERO_EXTRACT
13822 || GET_CODE (reg) == STRICT_LOW_PART)
13823 reg = XEXP (reg, 0);
13825 /* A LOG_LINK is defined as being placed on the first insn that uses
13826 a register and points to the insn that sets the register. Start
13827 searching at the next insn after the target of the link and stop
13828 when we reach a set of the register or the end of the basic block.
13830 Note that this correctly handles the link that used to point from
13831 I3 to I2. Also note that not much searching is typically done here
13832 since most links don't point very far away. */
13834 for (insn = NEXT_INSN (link->insn);
13835 (insn && (this_basic_block->next_bb == EXIT_BLOCK_PTR
13836 || BB_HEAD (this_basic_block->next_bb) != insn));
13837 insn = NEXT_INSN (insn))
13838 if (DEBUG_INSN_P (insn))
13840 else if (INSN_P (insn) && reg_overlap_mentioned_p (reg, PATTERN (insn)))
13842 if (reg_referenced_p (reg, PATTERN (insn)))
13846 else if (CALL_P (insn)
13847 && find_reg_fusage (insn, USE, reg))
13852 else if (INSN_P (insn) && reg_set_p (reg, insn))
13855 /* If we found a place to put the link, place it there unless there
13856 is already a link to the same insn as LINK at that point. */
13860 struct insn_link *link2;
13862 FOR_EACH_LOG_LINK (link2, place)
13863 if (link2->insn == link->insn)
13868 link->next = LOG_LINKS (place);
13869 LOG_LINKS (place) = link;
13871 /* Set added_links_insn to the earliest insn we added a
13873 if (added_links_insn == 0
13874 || DF_INSN_LUID (added_links_insn) > DF_INSN_LUID (place))
13875 added_links_insn = place;
13881 /* Subroutine of unmentioned_reg_p and callback from for_each_rtx.
13882 Check whether the expression pointer to by LOC is a register or
13883 memory, and if so return 1 if it isn't mentioned in the rtx EXPR.
13884 Otherwise return zero. */
13887 unmentioned_reg_p_1 (rtx *loc, void *expr)
13892 && (REG_P (x) || MEM_P (x))
13893 && ! reg_mentioned_p (x, (rtx) expr))
13898 /* Check for any register or memory mentioned in EQUIV that is not
13899 mentioned in EXPR. This is used to restrict EQUIV to "specializations"
13900 of EXPR where some registers may have been replaced by constants. */
13903 unmentioned_reg_p (rtx equiv, rtx expr)
13905 return for_each_rtx (&equiv, unmentioned_reg_p_1, expr);
13909 dump_combine_stats (FILE *file)
13913 ";; Combiner statistics: %d attempts, %d substitutions (%d requiring new space),\n;; %d successes.\n\n",
13914 combine_attempts, combine_merges, combine_extras, combine_successes);
13918 dump_combine_total_stats (FILE *file)
13922 "\n;; Combiner totals: %d attempts, %d substitutions (%d requiring new space),\n;; %d successes.\n",
13923 total_attempts, total_merges, total_extras, total_successes);
13927 gate_handle_combine (void)
13929 return (optimize > 0);
13932 /* Try combining insns through substitution. */
13933 static unsigned int
13934 rest_of_handle_combine (void)
13936 int rebuild_jump_labels_after_combine;
13938 df_set_flags (DF_LR_RUN_DCE + DF_DEFER_INSN_RESCAN);
13939 df_note_add_problem ();
13942 regstat_init_n_sets_and_refs ();
13944 rebuild_jump_labels_after_combine
13945 = combine_instructions (get_insns (), max_reg_num ());
13947 /* Combining insns may have turned an indirect jump into a
13948 direct jump. Rebuild the JUMP_LABEL fields of jumping
13950 if (rebuild_jump_labels_after_combine)
13952 timevar_push (TV_JUMP);
13953 rebuild_jump_labels (get_insns ());
13955 timevar_pop (TV_JUMP);
13958 regstat_free_n_sets_and_refs ();
13962 struct rtl_opt_pass pass_combine =
13966 "combine", /* name */
13967 gate_handle_combine, /* gate */
13968 rest_of_handle_combine, /* execute */
13971 0, /* static_pass_number */
13972 TV_COMBINE, /* tv_id */
13973 PROP_cfglayout, /* properties_required */
13974 0, /* properties_provided */
13975 0, /* properties_destroyed */
13976 0, /* todo_flags_start */
13977 TODO_df_finish | TODO_verify_rtl_sharing |
13978 TODO_ggc_collect, /* todo_flags_finish */