1 ------------------------------------------------------------------------------
3 -- GNAT COMPILER COMPONENTS --
9 -- Copyright (C) 1996-2008, Free Software Foundation, Inc. --
11 -- GNAT is free software; you can redistribute it and/or modify it under --
12 -- terms of the GNU General Public License as published by the Free Soft- --
13 -- ware Foundation; either version 3, or (at your option) any later ver- --
14 -- sion. GNAT is distributed in the hope that it will be useful, but WITH- --
15 -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --
16 -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License --
17 -- for more details. You should have received a copy of the GNU General --
18 -- Public License distributed with GNAT; see file COPYING3. If not, go to --
19 -- http://www.gnu.org/licenses for a complete copy of the license. --
21 -- GNAT was originally developed by the GNAT team at New York University. --
22 -- Extensive contributions were provided by Ada Core Technologies Inc. --
24 ------------------------------------------------------------------------------
26 -- This package contains, for each of the command of the GNAT driver, one
27 -- constant array; each component of this array is a string that defines,
28 -- in coded form as explained below, the conversion of a VMS qualifier of the
29 -- command to the corresponding switch of the GNAT tool corresponding to the
32 -- This package is used by the GNAT driver to invokes the GNAT tools with the
33 -- switches corresponding to the VMS qualifier and by the Project Manager to
34 -- convert VMS qualifiers in project files to their corresponding switch
37 -- This package is also an input to the tool that generates the VMS GNAT
38 -- help information automatically.
40 -- NOTE: the format of this package must follow the following rules, so that
41 -- the VMS GNAT help tool works properly:
43 -- - Each command zone (where the eventual qualifiers are declared) must
44 -- begin with a boxed comment of the form:
46 -- ---------------------------------
47 -- -- Switches for GNAT <COMMAND> --
48 -- ---------------------------------
50 -- where <COMMAND> is the name of a GNAT command in capital letters, for
51 -- example BIND, COMPILE, XREF, ...
53 -- - each qualifier declaration must be followed either by
54 -- - a comment starting with "-- NODOC", to indicate that there is
55 -- no documentation for this qualifier, or
56 -- - a contiguous sequence of comments that constitute the
57 -- documentation of the qualifier.
59 -- - each command zone ends with the declaration of the contant array
60 -- for the command, of the form:
62 -- <Command>__Switches : aliased constant Switches :=
70 -- The syntax of a qualifier delaration is as follows:
72 -- SWITCH_STRING ::= "/ command-qualifier-name TRANSLATION"
76 -- | DIRECTORIES_TRANSLATION
78 -- | NO_SPACE_FILE_TRANSL
79 -- | NUMERIC_TRANSLATION
80 -- | STRING_TRANSLATION
81 -- | OPTIONS_TRANSLATION
82 -- | COMMANDS_TRANSLATION
83 -- | ALPHANUMPLUS_TRANSLATION
84 -- | OTHER_TRANSLATION
86 -- DIRECT_TRANSLATION ::= space UNIX_SWITCHES
87 -- DIRECTORIES_TRANSLATION ::= =* UNIX_SWITCH *
88 -- DIRECTORY_TRANSLATION ::= =% UNIX_SWITCH %
89 -- FILE_TRANSLATION ::= =@ UNIX_SWITCH @
90 -- NO_SPACE_FILE_TRANSL ::= =< UNIX_SWITCH >
91 -- NUMERIC_TRANSLATION ::= =# UNIX_SWITCH # | # number #
92 -- STRING_TRANSLATION ::= =" UNIX_SWITCH "
93 -- OPTIONS_TRANSLATION ::= =OPTION {space OPTION}
94 -- COMMANDS_TRANSLATION ::= =? ARGS space command-name
95 -- ALPHANUMPLUS_TRANSLATION ::= =| UNIX_SWITCH |
97 -- UNIX_SWITCHES ::= UNIX_SWITCH {, UNIX_SWITCH}
99 -- UNIX_SWITCH ::= unix-switch-string | !unix-switch-string | `string'
101 -- OPTION ::= option-name space UNIX_SWITCHES
103 -- ARGS ::= -cargs | -bargs | -largs
105 -- Here command-qual is the name of the switch recognized by the GNATCmd.
106 -- This is always given in upper case in the templates, although in the
107 -- actual commands, either upper or lower case is allowed.
109 -- The unix-switch-string always starts with a minus, and has no commas
110 -- or spaces in it. Case is significant in the unix switch string. If a
111 -- unix switch string is preceded by the not sign (!) it means that the
112 -- effect of the corresponding command qualifer is to remove any previous
113 -- occurrence of the given switch in the command line.
115 -- The DIRECTORIES_TRANSLATION format is used where a list of directories
116 -- is given. This possible corresponding formats recognized by GNATCmd are
117 -- as shown by the following example for the case of PATH
120 -- PATH=(direc,direc,direc,direc)
122 -- When more than one directory is present for the DIRECTORIES case, then
123 -- multiple instances of the corresponding unix switch are generated,
124 -- with the file name being substituted for the occurrence of *.
126 -- The FILE_TRANSLATION format is similar except that only a single
127 -- file is allowed, not a list of files, and only one unix switch is
128 -- generated as a result.
130 -- the NO_SPACE_FILE_TRANSL is similar to FILE_TRANSLATION, except that
131 -- no space is inserted between the switch and the file name.
133 -- The NUMERIC_TRANSLATION format is similar to the FILE_TRANSLATION case
134 -- except that the parameter is a decimal integer in the range 0 to 999.
136 -- For the OPTIONS_TRANSLATION case, GNATCmd similarly permits one or
137 -- more options to appear (although only in some cases does the use of
138 -- multiple options make logical sense). For example, taking the
139 -- case of ERRORS for GCC, the following are all allowed:
142 -- /ERRORS=(FULL,VERBOSE)
143 -- /ERRORS=(BRIEF IMMEDIATE)
145 -- If no option is provided (e.g. just /ERRORS is written), then the
146 -- first option in the list is the default option. For /ERRORS this
147 -- is NORMAL, so /ERRORS with no option is equivalent to /ERRORS=NORMAL.
149 -- The COMMANDS_TRANSLATION case is only used for gnatmake, to correspond
150 -- to the use of -cargs, -bargs and -largs (the ARGS string as indicated
151 -- is one of these three possibilities). The name given by COMMAND is the
152 -- corresponding command name to be used to interprete the switches to be
153 -- passed on. Switches of this type set modes, e.g. /COMPILER_QUALIFIERS
154 -- sets the mode so that all subsequent switches, up to another switch
155 -- with COMMANDS_TRANSLATION apply to the corresponding commands issued
156 -- by the make utility. For example
158 -- /COMPILER_QUALIFIERS /LIST /BINDER_QUALIFIERS /MAIN
159 -- /COMPILER_QUALIFIERS /NOLIST /COMPILE_CHECKS=SYNTAX
161 -- Clearly these switches must come at the end of the list of switches
162 -- since all subsequent switches apply to an issued command.
164 -- For the DIRECT_TRANSLATION case, an implicit additional qualifier
165 -- declaration is created by prepending NO to the name of the qualifer,
166 -- and then inverting the sense of the UNIX_SWITCHES string. For example,
167 -- given the qualifier definition:
171 -- An implicit qualifier definition is created:
175 -- In the case where, a ! is already present, inverting the sense of the
176 -- switch means removing it.
179 -- A synonym to shorten the table
181 type String_Ptr is access constant String;
182 -- String pointer type used throughout
184 type Switches is array (Natural range <>) of String_Ptr;
185 -- Type used for array of swtiches
187 type Switches_Ptr is access constant Switches;
189 ----------------------------
190 -- Switches for GNAT BIND --
191 ----------------------------
193 S_Bind_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
195 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
197 -- Add directories to the project search path.
199 S_Bind_Bind : aliased constant S := "/BIND_FILE=" &
204 -- /BIND_FILE[=bind-file-option]
206 -- Specifies the language of the binder generated file.
208 -- ADA (D) Binder file is Ada.
210 -- C Binder file is 'C'.
212 S_Bind_Build : aliased constant S := "/BUILD_LIBRARY=|" &
214 -- /BUILD_LIBRARY=xxx
216 -- Binds the units for library building. In this case the adainit and
217 -- adafinal procedures are rename to xxxinit and xxxfinal. Implies
220 S_Bind_Current : aliased constant S := "/CURRENT_DIRECTORY " &
222 -- /CURRENT_DIRECTORY (D)
223 -- /NOCURRENT_DIRECTORY
225 -- Look for source, library or object files in the default directory.
227 S_Bind_Debug : aliased constant S := "/DEBUG=" &
242 -- /DEBUG[=debug-level]
245 -- Specify level of debugging information generated for the elaboration
246 -- routine. See corresponding qualifier for GNAT COMPILE.
248 S_Bind_DebugX : aliased constant S := "/NODEBUG " &
250 -- NODOC (see /DEBUG)
252 S_Bind_Elab : aliased constant S := "/ELABORATION_DEPENDENCIES " &
254 -- /ELABORATION_DEPENDENCIES
255 -- /NOELABORATION_DEPENDENCIES (D)
257 -- Output complete list of elaboration-order dependencies, showing the
258 -- reason for each dependency. This output can be rather extensive but may
259 -- be useful in diagnosing problems with elaboration order. The output is
260 -- written to SYS$OUTPUT.
262 S_Bind_Error : aliased constant S := "/ERROR_LIMIT=#" &
266 -- Limit number of detected errors to nnn (1-999999).
268 S_Bind_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' &
270 -- /EXTERNAL_REFERENCE="name=val"
272 -- Specifies an external reference to the project manager. Useful only if
273 -- /PROJECT_FILE is used.
276 -- /EXTERNAL_REFERENCE="DEBUG=TRUE"
278 S_Bind_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
280 -- /NOFOLLOW_LINKS_FOR_FILES (D)
281 -- /FOLLOW_LINKS_FOR_FILES
283 -- Follow links when parsing project files
285 S_Bind_Force : aliased constant S := "/FORCE_ELAB_FLAGS " &
287 -- /NOFORCE_ELAB_FLAGS (D)
290 -- Force checking of elaboration Flags
292 S_Bind_Help : aliased constant S := "/HELP " &
296 -- Output usage information.
298 S_Bind_Init : aliased constant S := "/INITIALIZE_SCALARS=" &
305 -- /INITIALIZE_SCALARS[=scalar-option]
307 -- Indicate how uninitialized scalar values for which a pragma
308 -- Initialize_Scalars applies should be initialized.
309 -- scalar-option may be one of the following:
311 -- INVALID (D) Initialize with an invalid value.
312 -- LOW Initialize with the lowest valid value of the subtype.
313 -- HIGH Initialize with the highest valid value of the subtype.
315 S_Bind_Leap : aliased constant S := "/ENABLE_LEAP_SECONDS " &
317 -- /ENABLE_LEAP_SECONDS
318 -- /NOENABLE_LEAP_SECONDS (D)
320 -- Enable leap seconds support in Ada.Calendar and its children.
322 S_Bind_Library : aliased constant S := "/LIBRARY_SEARCH=*" &
324 -- /LIBRARY_SEARCH=(direc[,...])
326 -- When looking for library and object files look also in directories
329 S_Bind_Linker : aliased constant S := "/LINKER_OPTION_LIST " &
331 -- /NOLINKER_OPTION_LIST (D)
332 -- /LINKER_OPTION_LIST
334 -- Output linker options to SYS$OUTPUT. Includes library search
335 -- paths, contents of pragmas Ident and Linker_Options, and
336 -- libraries added by GNAT BIND.
338 S_Bind_Main : aliased constant S := "/MAIN " &
342 -- The main program is in Ada.
346 -- The main program is not in Ada.
348 S_Bind_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" &
355 -- /MESSAGES_PROJECT_FILE[=messages-option]
357 -- Specifies the "verbosity" of the parsing of project files.
358 -- messages-option may be one of the following:
360 -- DEFAULT (D) No messages are output if there is no error or warning.
362 -- MEDIUM A small number of messages are output.
364 -- HIGH A great number of messages are output, most of them not
365 -- being useful for the user.
367 S_Bind_Nostinc : aliased constant S := "/NOSTD_INCLUDES " &
371 -- Do not look for sources the in the system default directory.
373 S_Bind_Nostlib : aliased constant S := "/NOSTD_LIBRARIES " &
377 -- Do not look for library files in the system default directory.
379 S_Bind_No_Time : aliased constant S := "/NO_TIME_STAMP_CHECK " &
381 -- NODOC (see /TIME_STAMP_CHECK)
383 S_Bind_Object : aliased constant S := "/OBJECT_LIST " &
385 -- /NOOBJECT_LIST (D)
388 -- Output full names of all the object files that must be linker to
389 -- provide the Ada component of the program. The output is written to
392 S_Bind_Order : aliased constant S := "/ORDER_OF_ELABORATION " &
394 -- /NOORDER_OF_ELABORATION (D)
395 -- /ORDER_OF_ELABORATION
397 -- Output chosen elaboration order. The output is written to SYS$OUTPUT.
399 S_Bind_Output : aliased constant S := "/OUTPUT=@" &
403 -- File name to use for the program containing the elaboration code.
405 S_Bind_OutputX : aliased constant S := "/NOOUTPUT " &
409 -- Check only. Do not generate the binder output file.
411 -- In this mode the binder performs all error checks but does not generate
414 S_Bind_Pess : aliased constant S := "/PESSIMISTIC_ELABORATION " &
416 -- /PESSIMISTIC_ELABORATION
418 -- Causes the binder to choose a "pessimistic" elaboration order, i.e. one
419 -- which is most likely to cause elaboration order problems. This can be
420 -- useful in testing portable code to make sure that there are no missing
421 -- elaborate pragmas.
423 S_Bind_Project : aliased constant S := "/PROJECT_FILE=<" &
425 -- /PROJECT_FILE=filename
427 -- Specifies the main project file to be used. The project files rooted
428 -- at the main project file will be parsed before the invocation of the
429 -- binder. The source and object directories to be searched will be
430 -- communicated to the binder through logical names ADA_PRJ_INCLUDE_FILE
431 -- and ADA_PRJ_OBJECTS_FILE.
433 S_Bind_Read : aliased constant S := "/READ_SOURCES=" &
440 -- /READ_SOURCES[=(keyword[,...])]
443 -- The following keyword are accepted:
445 -- ALL (D) Require source files to be present. In this mode, the
446 -- binder insists on being able to locate all source files
447 -- that are referenced and checks their consistency. In
448 -- normal mode, if a source file cannot be located it is
449 -- simply ignored. If you specify the ALL keyword, a
450 -- missing source file is an error.
452 -- NONE Exclude source files. In this mode, the binder only
453 -- checks that ALI files are consistent with one another.
454 -- source files are not accessed. The binder runs faster
455 -- in this mode, and there is still a guarantee that the
456 -- resulting program is self-consistent.
458 -- If a source file has been edited since it was last
459 -- compiled and you specify the NONE keyword, the binder
460 -- will not detect that the object file is out of date
461 -- with the source file.
463 -- This is the same as specifying /NOREAD_SOURCES.
465 -- AVAILABLE Check that object files are consistent with one
466 -- another and are consistent with any source files that
469 S_Bind_ReadX : aliased constant S := "/NOREAD_SOURCES " &
471 -- NODOC (see /READ_SOURCES)
473 S_Bind_Rename : aliased constant S := "/RENAME_MAIN=<" &
477 -- Renames the generated main program from main to xxx.
478 -- This is useful in the case of some cross-building environments, where
479 -- the actual main program is separate from the one generated
482 S_Bind_Report : aliased constant S := "/REPORT_ERRORS=" &
489 -- /REPORT_ERRORS[=(keyword[,...])]
495 -- With the DEFAULT keyword (which is not the default when the binder is
496 -- run from GNAT BIND) or the /NOREPORT_ERRORS qualifier, brief error
497 -- messages are generated to SYS$ERROR. If the VERBOSE keyword is
498 -- present, a header is written to SYS$OUTPUT and any error messages are
499 -- directed to SYS$OUTPUT All that is written to SYS$ERROR is a brief
502 -- If the BRIEF keyword is specified, the binder will generate brief error
503 -- messages to SYS$ERROR even if verbose mode is specified. This is
504 -- relevant only when used together with the VERBOSE keyword or /VERBOSE
507 S_Bind_ReportX : aliased constant S := "/NOREPORT_ERRORS " &
509 -- NODOC (see /REPORT_ERRORS)
511 S_Bind_Restr : aliased constant S := "/RESTRICTION_LIST " &
513 -- /NORESTRICTION_LIST (D)
516 -- Generate list of pragma Rerstrictions that could be applied to the
517 -- current unit. This is useful for code audit purposes, and also may be
518 -- used to improve code generation in some cases.
520 S_Bind_Return : aliased constant S := "/RETURN_CODES=" &
525 -- /RETURN_CODES=POSIX (D)
528 -- Specifies the style of default exit code returned. Must be used in
529 -- conjunction with and match the Link qualifer with same name.
531 -- POSIX (D) Return Posix success (0) by default.
533 -- VMS Return VMS success (1) by default.
535 S_Bind_RTS : aliased constant S := "/RUNTIME_SYSTEM=|" &
537 -- /RUNTIME_SYSTEM=xxx
539 -- Binds against an alternate runtime system named xxx or RTS-xxx.
541 S_Bind_Search : aliased constant S := "/SEARCH=*" &
543 -- /SEARCH=(directory[,...])
545 -- When looking for source or object files also look in directories
548 -- This is the same as specifying both /LIBRARY_SEARCH and /SOURCE_SEARCH
551 S_Bind_Shared : aliased constant S := "/SHARED " &
556 -- Link against a shared GNAT run time when available.
558 S_Bind_Slice : aliased constant S := "/TIME_SLICE=#" &
562 -- Set the time slice value to nnn milliseconds. A value of zero means no
563 -- time slicing and also indicates to the tasking run time to match as
564 -- close as possible to the annex D requirements of the RM.
566 S_Bind_Source : aliased constant S := "/SOURCE_SEARCH=*" &
568 -- /SOURCE_SEARCH=(directory[,...])
570 -- When looking for source files also look in directories specified.
572 S_Bind_Static : aliased constant S := "/STATIC " &
577 -- Link against a static GNAT run time.
579 S_Bind_Store : aliased constant S := "/STORE_TRACEBACKS " &
581 -- /STORE_TRACEBACKS (D)
582 -- /NOSTORE_TRACEBACKS
584 -- Store tracebacks in exception occurrences.
585 -- This is the default on VMS, with the zero-cost exception mechanism.
586 -- This qualifier has no impact, except when using the setjmp/longjmp
587 -- exception mechanism, with the GNAT COMPILE qualifier /LONGJMP_SETJMP.
589 S_Bind_Subdirs : aliased constant S := "/SUBDIRS=<" &
593 -- The actual directories (object, exec, library, ...) are subdirectories
594 -- of the directory specified in the project file. If the subdirectory
595 -- does not exist, it is created automatically.
597 S_Bind_Time : aliased constant S := "/TIME_STAMP_CHECK " &
599 -- /TIME_STAMP_CHECK (D)
601 -- Time stamp errors will be treated as errors.
603 -- /NOTIME_STAMP_CHECK
605 -- Ignore time stamp errors. Any time stamp error messages are treated as
606 -- warning messages. This switch essentially disconnects the normal
607 -- consistency checking, and the resulting program may have undefined
608 -- semantics if inconsistent units are present.
610 -- This means that /NOTIME_STAMP_CHECK should be used only in unusual
611 -- situations, with extreme care.
613 S_Bind_Verbose : aliased constant S := "/VERBOSE " &
618 -- Equivalent to /REPORT_ERRORS=VERBOSE.
620 S_Bind_Warn : aliased constant S := "/WARNINGS=" &
627 -- /WARNINGS[=(keyword[,...])]
630 -- The following keywords are supported:
632 -- NORMAL (D) Print warning messages and treat them as warning.
633 -- SUPPRESS Suppress all warning messages (same as /NOWARNINGS).
634 -- ERROR Treat any warning messages as fatal errors
636 S_Bind_WarnX : aliased constant S := "/NOWARNINGS " &
638 -- NODOC (see /WARNINGS)
640 S_Bind_Wide : aliased constant S := "/WIDE_CHARACTER_ENCODING=" &
653 -- /NOWIDE_CHARACTER_ENCODING (D)
654 -- /WIDE_CHARACTER_ENCODING[=encode-type]
656 -- Specifies the mechanism used to encode wide characters, overriding
657 -- the default as set by the /WIDE_CHARACTER_ENCODING option for the
658 -- compilation of the main program.
660 S_Bind_Zero : aliased constant S := "/ZERO_MAIN " &
665 -- Normally the binder checks that the unit name given on the command line
666 -- corresponds to a suitable main subprogram. When /ZERO_MAIN is used,
667 -- a list of ALI files can be given, and the execution of the program
668 -- consists of elaboration of these units in an appropriate order.
670 Bind_Switches : aliased constant Switches :=
673 S_Bind_Build 'Access,
674 S_Bind_Current 'Access,
675 S_Bind_Debug 'Access,
676 S_Bind_DebugX 'Access,
678 S_Bind_Error 'Access,
680 S_Bind_Follow 'Access,
681 S_Bind_Force 'Access,
685 S_Bind_Library 'Access,
686 S_Bind_Linker 'Access,
689 S_Bind_Nostinc 'Access,
690 S_Bind_Nostlib 'Access,
691 S_Bind_No_Time 'Access,
692 S_Bind_Object 'Access,
693 S_Bind_Order 'Access,
694 S_Bind_Output 'Access,
695 S_Bind_OutputX 'Access,
697 S_Bind_Project 'Access,
699 S_Bind_ReadX 'Access,
700 S_Bind_Rename 'Access,
701 S_Bind_Report 'Access,
702 S_Bind_ReportX 'Access,
703 S_Bind_Restr 'Access,
704 S_Bind_Return 'Access,
706 S_Bind_Search 'Access,
707 S_Bind_Shared 'Access,
708 S_Bind_Slice 'Access,
709 S_Bind_Source 'Access,
710 S_Bind_Static 'Access,
711 S_Bind_Store 'Access,
712 S_Bind_Subdirs 'Access,
714 S_Bind_Verbose 'Access,
716 S_Bind_WarnX 'Access,
718 S_Bind_Zero 'Access);
720 -----------------------------
721 -- Switches for GNAT CHECK --
722 -----------------------------
724 S_Check_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
726 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
728 -- Add directories to the project search path.
730 S_Check_All : aliased constant S := "/ALL " &
735 -- Also check the components of the GNAT run time and process the needed
736 -- components of the GNAT RTL when building and analyzing the global
737 -- structure for checking the global rules.
739 S_Check_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' &
741 -- /EXTERNAL_REFERENCE="name=val"
743 -- Specifies an external reference to the project manager. Useful only if
744 -- /PROJECT_FILE is used.
747 -- /EXTERNAL_REFERENCE="DEBUG=TRUE"
749 S_Check_Files : aliased constant S := "/FILES=@" &
753 -- Take as arguments the files that are listed in the specified
756 S_Check_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
758 -- /NOFOLLOW_LINKS_FOR_FILES (D)
759 -- /FOLLOW_LINKS_FOR_FILES
761 -- Follow links when parsing project files
763 S_Check_Help : aliased constant S := "/HELP " &
768 -- Print information about currently implemented checks.
770 S_Check_Locs : aliased constant S := "/LOCS " &
775 -- Use full source locations referebces in the report file.
777 S_Check_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" &
784 -- /MESSAGES_PROJECT_FILE[=messages-option]
786 -- Specifies the "verbosity" of the parsing of project files.
787 -- messages-option may be one of the following:
789 -- DEFAULT (D) No messages are output if there is no error or warning.
791 -- MEDIUM A small number of messages are output.
793 -- HIGH A great number of messages are output, most of them not
794 -- being useful for the user.
796 S_Check_Project : aliased constant S := "/PROJECT_FILE=<" &
798 -- /PROJECT_FILE=filename
800 -- Specifies the main project file to be used. The project files rooted
801 -- at the main project file will be parsed before the invocation of the
802 -- gnatcheck. The source directories to be searched will be communicated
803 -- to gnatcheck through logical name ADA_PRJ_INCLUDE_FILE.
805 S_Check_Quiet : aliased constant S := "/QUIET " &
810 -- Work quietly, only output warnings and errors.
812 S_Check_Sections : aliased constant S := "/SECTIONS=" &
819 "BY_FILES_BY_RULES " &
821 -- /SECTIONS[=section-option, section-option, ...]
823 -- Specify what sections should be included into the report file.
824 -- By default, all three section (diagnises in the format correcponding
825 -- to compiler error and warning messages, diagnoses grouped by rules and
826 -- then - by files, diagnoses grouped by files and then - by rules) are
827 -- included in the report file.
829 -- section-option may be one of the following:
831 -- COMPILER_STYLE Include diagnostics in compile-style format
832 -- (diagoses are grouped by files, for each file
833 -- they are ordered according to the references
835 -- BY_RULES Include diagnostics grouped first by rules and
837 -- BY_FILES_BY_RULES Include diagnostics grouped first by files and
840 -- If one of these options is specified, then the report file contains
841 -- only sections set by these options
843 S_Check_Short : aliased constant S := "/SHORT " &
848 -- Generate a short form of the report file.
850 S_Check_Subdirs : aliased constant S := "/SUBDIRS=<" &
854 -- The actual directories (object, exec, library, ...) are subdirectories
855 -- of the directory specified in the project file. If the subdirectory
856 -- does not exist, it is created automatically.
858 S_Check_Verb : aliased constant S := "/VERBOSE " &
863 -- The version number and copyright notice are output, as well as exact
864 -- copies of the gnat1 commands spawned to obtain the chop control
867 Check_Switches : aliased constant Switches :=
868 (S_Check_Add 'Access,
871 S_Check_Files 'Access,
872 S_Check_Follow 'Access,
873 S_Check_Help 'Access,
874 S_Check_Locs 'Access,
875 S_Check_Mess 'Access,
876 S_Check_Project 'Access,
877 S_Check_Quiet 'Access,
878 S_Check_Sections 'Access,
879 S_Check_Short 'Access,
880 S_Check_Subdirs 'Access,
881 S_Check_Verb 'Access);
883 ----------------------------
884 -- Switches for GNAT SYNC --
885 ----------------------------
887 S_Sync_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
889 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
891 -- Add directories to the project search path.
893 S_Sync_All : aliased constant S := "/ALL " &
898 -- Also check the components of the GNAT run time and process the needed
899 -- components of the GNAT RTL when building and analyzing the global
900 -- structure for checking the global rules.
902 S_Sync_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' &
904 -- /EXTERNAL_REFERENCE="name=val"
906 -- Specifies an external reference to the project manager. Useful only if
907 -- /PROJECT_FILE is used.
910 -- /EXTERNAL_REFERENCE="DEBUG=TRUE"
912 S_Sync_Files : aliased constant S := "/FILES=@" &
916 -- Take as arguments the files that are listed in the specified
919 S_Sync_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
921 -- /NOFOLLOW_LINKS_FOR_FILES (D)
922 -- /FOLLOW_LINKS_FOR_FILES
924 -- Follow links when parsing project files
926 S_Sync_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" &
933 -- /MESSAGES_PROJECT_FILE[=messages-option]
935 -- Specifies the "verbosity" of the parsing of project files.
936 -- messages-option may be one of the following:
938 -- DEFAULT (D) No messages are output if there is no error or warning.
940 -- MEDIUM A small number of messages are output.
942 -- HIGH A great number of messages are output, most of them not
943 -- being useful for the user.
945 S_Sync_Project : aliased constant S := "/PROJECT_FILE=<" &
947 -- /PROJECT_FILE=filename
949 -- Specifies the main project file to be used. The project files rooted
950 -- at the main project file will be parsed before the invocation of the
951 -- gnatcheck. The source directories to be searched will be communicated
952 -- to gnatcheck through logical name ADA_PRJ_INCLUDE_FILE.
954 S_Sync_Quiet : aliased constant S := "/QUIET " &
959 -- Work quietly, only output warnings and errors.
961 S_Sync_Subdirs : aliased constant S := "/SUBDIRS=<" &
965 -- The actual directories (object, exec, library, ...) are subdirectories
966 -- of the directory specified in the project file. If the subdirectory
967 -- does not exist, it is created automatically.
969 S_Sync_Verb : aliased constant S := "/VERBOSE " &
974 -- The version number and copyright notice are output, as well as exact
975 -- copies of the gnat1 commands spawned to obtain the chop control
978 S_Sync_Exec : aliased constant S := "/EXECUTION_TIME " &
980 -- /NOEXECUTION_TIME (D)
983 -- Output the execution time
985 S_Sync_Details : aliased constant S := "/DETAILs=" &
992 -- /DETAILS[=options]
994 -- Specifies the details of the output.
995 -- Options may be one of the following:
1001 S_Sync_Warnoff : aliased constant S := "/WARNINGS_OFF " &
1006 -- Turn warnings off
1008 S_Sync_Output : aliased constant S := "/OUTPUT_FILE=<" &
1011 -- /OUTPUT_FILE=filename
1013 -- Redirect output to a text file
1015 Sync_Switches : aliased constant Switches :=
1016 (S_Sync_Add 'Access,
1019 S_Sync_Follow 'Access,
1020 S_Sync_Files 'Access,
1021 S_Sync_Mess 'Access,
1022 S_Sync_Project 'Access,
1023 S_Sync_Quiet 'Access,
1024 S_Sync_Subdirs 'Access,
1025 S_Sync_Verb 'Access,
1026 S_Sync_Exec 'Access,
1027 S_Sync_Details 'Access,
1028 S_Sync_Warnoff 'Access,
1029 S_Sync_Output 'Access);
1031 ----------------------------
1032 -- Switches for GNAT CHOP --
1033 ----------------------------
1035 S_Chop_Comp : aliased constant S := "/COMPILATION " &
1037 -- /NOCOMPILATION (D)
1040 -- Compilation mode, handle configuration pragmas strictly according to
1043 S_Chop_File : aliased constant S := "/FILE_NAME_MAX_LENGTH=#" &
1045 -- /FILE_NAME_MAX_LENGTH[=nnn]
1047 -- Limit generated file names to NNN (default of 8) characters. This is
1048 -- useful if the resulting set of files is required to be interoperable
1049 -- with systems like MS-DOS which limit the length of file names.
1051 S_Chop_Help : aliased constant S := "/HELP " &
1056 -- Print usage information.
1058 S_Chop_Over : aliased constant S := "/OVERWRITE " &
1063 -- Overwrite existing file names. Normally GNAT CHOP regards it as a
1064 -- fatal error situation if there is already a file with the same name as
1065 -- a file it would otherwise output. The /OVERWRITE qualifier bypasses
1066 -- this check, and any such existing files will be silently overwritten.
1068 S_Chop_Pres : aliased constant S := "/PRESERVE " &
1073 -- Causes the file modification time stamp of the input file to be
1074 -- preserved and used for the time stamp of the output file(s). This may
1075 -- be useful for preserving coherency of time stamps in an enviroment
1076 -- where gnatchop is used as part of a standard build process.
1078 S_Chop_Quiet : aliased constant S := "/QUIET " &
1083 -- Work quietly, only output warnings and errors.
1085 S_Chop_Ref : aliased constant S := "/REFERENCE " &
1090 -- Generate "Source_Reference" pragmas. Use this qualifier if the output
1091 -- files are regarded as temporary and development is to be done in terms
1092 -- of the original unchopped file. The /REFERENCE qualifier causes
1093 -- "Source_Reference" pragmas to be inserted into each of the generated
1094 -- files to refers back to the original file name and line number. The
1095 -- result is that all error messages refer back to the original unchopped
1098 -- In addition, the debugging information placed into the object file
1099 -- (when the /DEBUG qualifier of GNAT COMPILE or GNAT MAKE is specified)
1100 -- also refers back to this original file so that tools like profilers
1101 -- and debuggers will give information in terms of the original unchopped
1104 S_Chop_Verb : aliased constant S := "/VERBOSE " &
1109 -- The version number and copyright notice are output, as well as exact
1110 -- copies of the gnat1 commands spawned to obtain the chop control
1113 Chop_Switches : aliased constant Switches :=
1114 (S_Chop_Comp 'Access,
1115 S_Chop_File 'Access,
1116 S_Chop_Help 'Access,
1117 S_Chop_Over 'Access,
1118 S_Chop_Pres 'Access,
1119 S_Chop_Quiet 'Access,
1121 S_Chop_Verb 'Access);
1123 -----------------------------
1124 -- Switches for GNAT CLEAN --
1125 -----------------------------
1127 S_Clean_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
1129 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
1131 -- Add directories to the project search path.
1133 S_Clean_Compil : aliased constant S := "/COMPILER_FILES_ONLY " &
1135 -- /NOCOMPILER_FILES_ONLY (D)
1136 -- /COMPILER_FILES_ONLY
1138 -- Only attempt to delete the files produced by the compiler, not those
1139 -- produced by the binder or the linker. The files that are not to be
1140 -- deleted are library files, interface copy files, binder generated files
1141 -- and executable files.
1143 S_Clean_Current : aliased constant S := "/CURRENT_DIRECTORY " &
1145 -- /CURRENT_DIRECTORY (D)
1147 -- Look for ALI or object files in the directory where GNAT CLEAN was
1150 -- /NOCURRENT_DIRECTORY
1152 -- Do not look for ALI or object files in the directory where GNAT CLEAN
1155 S_Clean_Delete : aliased constant S := "/DELETE " &
1159 -- Delete the files that are not read-only.
1163 -- Informative-only mode. Do not delete any files. Output the list of the
1164 -- files that would have been deleted if this switch was not specified.
1166 S_Clean_Dirobj : aliased constant S := "/DIRECTORY_OBJECTS=@" &
1168 -- /DIRECTORY_OBJECTS=<file>
1170 -- Find the object files and .ALI files in <file>.
1171 -- This qualifier is not compatible with /PROJECT_FILE.
1173 S_Clean_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' &
1175 -- /EXTERNAL_REFERENCE="name=val"
1177 -- Specifies an external reference to the project manager. Useful only if
1178 -- /PROJECT_FILE is used.
1181 -- /EXTERNAL_REFERENCE="DEBUG=TRUE"
1183 S_Clean_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
1185 -- /NOFOLLOW_LINKS_FOR_FILES (D)
1186 -- /FOLLOW_LINKS_FOR_FILES
1188 -- Follow links when parsing project files
1190 S_Clean_Full : aliased constant S := "/FULL_PATH_IN_BRIEF_MESSAGES " &
1192 -- /NOFULL_PATH_IN_BRIEF_MESSAGES (D)
1193 -- /FULL_PATH_IN_BRIEF_MESSAGES
1195 -- When using project files, if some errors or warnings are detected
1196 -- during parsing and verbose mode is not in effect (no use of qualifier
1197 -- /VERBOSE), then error lines start with the full path name of the
1198 -- project file, rather than its simple file name.
1200 S_Clean_Help : aliased constant S := "/HELP " &
1205 -- Output a message explaining the usage of gnatclean.
1207 S_Clean_Index : aliased constant S := "/SOURCE_INDEX=#" &
1209 -- /SOURCE_INDEX=nnn
1211 -- Specifies the index of the units in the source file
1212 -- By default, source files are mono-unit and there is no index
1214 S_Clean_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" &
1221 -- /MESSAGES_PROJECT_FILE[=messages-option]
1223 -- Specifies the "verbosity" of the parsing of project files.
1224 -- messages-option may be one of the following:
1226 -- DEFAULT (D) No messages are output if there is no error or warning.
1228 -- MEDIUM A small number of messages are output.
1230 -- HIGH A great number of messages are output, most of them not
1231 -- being useful for the user.
1233 S_Clean_Object : aliased constant S := "/OBJECT_SEARCH=*" &
1235 -- /OBJECT_SEARCH=(directory,...)
1237 -- When searching for library and object files, look in the specified
1238 -- directories. The order in which library files are searched is the same
1241 S_Clean_Project : aliased constant S := "/PROJECT_FILE=<" &
1243 -- /PROJECT_FILE=filename
1245 -- Specifies the main project file to be used. The project files rooted
1246 -- at the main project file will be parsed before the invocation of the
1247 -- compiler. The source and object directories to be searched will be
1248 -- communicated to gnatclean through logical names ADA_PRJ_INCLUDE_FILE
1249 -- and ADA_PRJ_OBJECTS_FILE.
1251 S_Clean_Quiet : aliased constant S := "/QUIET " &
1256 -- Quiet output. If there are no error, do not ouuput anything, except in
1257 -- verbose mode (qualifier /VERBOSE) or in informative-only mode
1258 -- (qualifier /NODELETE).
1260 S_Clean_Recurs : aliased constant S := "/RECURSIVE " &
1265 -- When a project file is specified (using switch -P), clean all imported
1266 -- and extended project files, recursively. If this qualifier is not
1267 -- specified, only the files related to the main project file are to be
1268 -- deleted. This qualifier has no effect if no project file is specified.
1270 S_Clean_Search : aliased constant S := "/SEARCH=*" &
1272 -- /SEARCH=(directory,...)
1274 -- Equivalent to /OBJECT_SEARCH=(directory,...).
1276 S_Clean_Subdirs : aliased constant S := "/SUBDIRS=<" &
1280 -- The actual directories (object, exec, library, ...) are subdirectories
1281 -- of the directory specified in the project file. If the subdirectory
1282 -- does not exist, it is created automatically.
1284 S_Clean_Verbose : aliased constant S := "/VERBOSE " &
1291 Clean_Switches : aliased constant Switches :=
1292 (S_Clean_Add 'Access,
1293 S_Clean_Compil 'Access,
1294 S_Clean_Current'Access,
1295 S_Clean_Delete 'Access,
1296 S_Clean_Dirobj 'Access,
1297 S_Clean_Ext 'Access,
1298 S_Clean_Follow 'Access,
1299 S_Clean_Full 'Access,
1300 S_Clean_Help 'Access,
1301 S_Clean_Index 'Access,
1302 S_Clean_Mess 'Access,
1303 S_Clean_Object 'Access,
1304 S_Clean_Project'Access,
1305 S_Clean_Quiet 'Access,
1306 S_Clean_Recurs 'Access,
1307 S_Clean_Search 'Access,
1308 S_Clean_Subdirs'Access,
1309 S_Clean_Verbose'Access);
1311 -------------------------------
1312 -- Switches for GNAT COMPILE --
1313 -------------------------------
1315 S_GCC_Ada_83 : aliased constant S := "/83 " &
1320 -- Although GNAT is primarily an Ada 95 compiler, it accepts this
1321 -- qualifier to specify that an Ada 83 mode program is being compiled. If
1322 -- you specify this qualifier, GNAT rejects Ada 95 extensions and applies
1323 -- Ada 83 semantics. It is not possible to guarantee this qualifier does
1324 -- a perfect job; for example, some subtle tests of pathological cases,
1325 -- such as are found in ACVC tests that have been removed from the ACVC
1326 -- suite for Ada 95, may not compile correctly. However for practical
1327 -- purposes, using this qualifier should ensure that programs that
1328 -- compile correctly under the /83 qualifier can be ported reasonably
1329 -- easily to an Ada 83 compiler. This is the main use of this qualifier.
1331 -- With few exceptions (most notably the need to use "<>" on
1332 -- unconstrained generic formal parameters), it is not necessary to use
1333 -- this qualifier switch when compiling Ada 83 programs, because, with
1334 -- rare and obscure exceptions, Ada 95 is upwardly compatible with Ada
1335 -- 83. This means that a correct Ada 83 program is usually also a correct
1338 S_GCC_Ada_95 : aliased constant S := "/95 " &
1342 -- Allows GNAT to recognize the full range of Ada 95 constructs.
1343 -- This is the normal default for GNAT Pro.
1345 S_GCC_Ada_05 : aliased constant S := "/05 " &
1349 -- Allows GNAT to recognize all implemented proposed Ada 2005
1350 -- extensions. See features file for list of implemented features.
1352 S_GCC_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
1354 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
1356 -- Add directories to the project search path.
1358 S_GCC_Asm : aliased constant S := "/ASM " &
1363 -- Use to cause the assembler source file to be generated, using S as the
1364 -- filetype, instead of the object file. This may be useful if you need
1365 -- to examine the generated assembly code.
1367 S_GCC_Checks : aliased constant S := "/CHECKS=" &
1369 "-gnato,!-gnatE,!-gnatp " &
1377 "!-gnato,!-gnatp " &
1383 -- /CHECKS[=(keyword[,...])]
1385 -- If you compile with the default options, GNAT will insert many runtime
1386 -- checks into the compiled code, including code that performs range
1387 -- checking against constraints, but not arithmetic overflow checking for
1388 -- integer operations (including division by zero) or checks for access
1389 -- before elaboration on subprogram calls. All other runtime checks, as
1390 -- required by the Ada 95 Reference Manual, are generated by default.
1392 -- You may specify one or more of the following keywords to the /CHECKS
1393 -- qualifier to modify this behavior:
1395 -- DEFAULT The behavior described above. This is the default
1396 -- if the /CHECKS qualifier is not present on the
1397 -- command line. Same as /NOCHECKS.
1399 -- OVERFLOW Enables overflow checking for integer operations and
1400 -- checks for access before elaboration on subprogram
1401 -- calls. This causes GNAT to generate slower and larger
1402 -- executable programs by adding code to check for both
1403 -- overflow and division by zero (resulting in raising
1404 -- "Constraint_Error" as required by Ada semantics).
1405 -- Similarly, GNAT does not generate elaboration check
1406 -- by default, and you must specify this keyword to
1409 -- Note that this keyword does not affect the code
1410 -- generated for any floating-point operations; it
1411 -- applies only to integer operations. For floating-point,
1412 -- GNAT has the "Machine_Overflows" attribute set to
1413 -- "False" and the normal mode of operation is to generate
1414 -- IEEE NaN and infinite values on overflow or invalid
1415 -- operations (such as dividing 0.0 by 0.0).
1417 -- ELABORATION Enables dynamic checks for access-before-elaboration
1418 -- on subprogram calls and generic instantiations.
1420 -- ASSERTIONS The pragmas "Assert" and "Debug" normally have no
1421 -- effect and are ignored. This keyword causes "Assert"
1422 -- and "Debug" pragmas to be activated, as well as
1423 -- "Check", "Precondition" and "Postcondition" pragmas.
1425 -- SUPPRESS_ALL Suppress all runtime checks as though you have "pragma
1426 -- Suppress (all_checks)" in your source. Use this switch
1427 -- to improve the performance of the code at the expense
1428 -- of safety in the presence of invalid data or program
1431 -- DEFAULT Suppress the effect of any option OVERFLOW or
1434 -- FULL (D) Similar to OVERFLOW, but suppress the effect of any
1435 -- option ELABORATION or SUPPRESS_ALL.
1437 -- These keywords only control the default setting of the checks. You
1438 -- may modify them using either "Suppress" (to remove checks) or
1439 -- "Unsuppress" (to add back suppressed checks) pragmas in your program
1442 S_GCC_ChecksX : aliased constant S := "/NOCHECKS " &
1443 "-gnatp,!-gnato,!-gnatE";
1444 -- NODOC (see /CHECKS)
1446 S_GCC_Compres : aliased constant S := "/COMPRESS_NAMES " &
1448 -- /NOCOMPRESS_NAMES (D)
1451 -- Compress debug information and external symbol name table entries.
1452 -- In the generated debugging information, and also in the case of long
1453 -- external names, the compiler uses a compression mechanism if the name
1454 -- is very long. This compression method uses a checksum, and avoids
1455 -- trouble on some operating systems which have difficulty with very long
1458 S_GCC_Config : aliased constant S := "/CONFIGURATION_PRAGMAS_FILE=<" &
1460 -- /CONFIGURATION_PRAGMAS_FILE=file
1462 -- Specify a configuration pragmas file that need to be taken into account
1464 S_GCC_Current : aliased constant S := "/CURRENT_DIRECTORY " &
1466 -- /CURRENT_DIRECTORY (D)
1467 -- /NOCURRENT_DIRECTORY
1469 -- Look for source files in the default directory.
1471 S_GCC_Data : aliased constant S := "/DATA_PREPROCESSING=<" &
1473 -- /DATA_PREPROCESSING=file_name
1475 -- This qualifier indicates to the compiler the file name (without
1476 -- directory information) of the preprocessor data file to use.
1477 -- The preprocessor data file should be found in the source directories.
1479 -- A preprocessing data file is a text file with significant lines
1480 -- indicating how should be preprocessed either a specific source or all
1481 -- sources not mentioned in other lines. A significant line is a non
1482 -- empty, non comment line. Comments are similar to Ada comments.
1484 -- Each significant line starts with either a literal string or the
1485 -- character '*'. A literal string is the file name (without directory
1486 -- information) of the source to preprocess. A character '*' indicates the
1487 -- preprocessing for all the sources that are not specified explicitly on
1488 -- other lines. It is an error to have two lines with the same file name
1489 -- or two lines starting with the character '*'.
1491 -- After the file name or the character '*', another optional literal
1492 -- string indicating the file name of the definition file to be used for
1493 -- preprocessing. (see 15.3 Form of Definitions File. The definition files
1494 -- are found by the compiler in one of the source directories. In some
1495 -- cases, when compiling a source in a directory other than the current
1496 -- directory, if the definition file is in the current directory, it may
1497 -- be necessary to add the current directory as a source directory through
1498 -- qualifier "/SEARCH=[]", otherwise the compiler would not find the
1501 -- Then, optionally, switches similar to those of gnatprep may be found.
1502 -- Those switches are:
1504 -- -b Causes both preprocessor lines and the lines deleted by
1505 -- preprocessing to be replaced by blank lines, preserving
1506 -- the line number. This switch is always implied;
1507 -- however, if specified after `-c' it cancels the effect
1510 -- -c Causes both preprocessor lines and the lines deleted by
1511 -- preprocessing to be retained as comments marked with
1512 -- the special string "--! ".
1514 -- -Dsymbol=value Define or redefine a symbol, associated with value.
1515 -- A symbol is an Ada identifier, or an Ada reserved word,
1516 -- with the exception of "if", "else", "elsif", "end",
1517 -- "and", "or" and "then". value is either a literal
1518 -- string, an Ada identifier or any Ada reserved word.
1519 -- A symbol declared with this switch replaces a symbol
1520 -- with the same name defined in a definition file.
1522 -- -s Causes a sorted list of symbol names and values to be
1523 -- listed on the standard output file.
1525 -- -u Causes undefined symbols to be treated as having the
1526 -- value FALSE in the context of a preprocessor test.
1527 -- In the absence of this option, an undefined symbol
1528 -- in a #if or #elsif test will be treated as an error.
1530 -- Examples of valid lines in a preprocessor data file:
1532 -- "toto.adb" "prep.def" -u
1533 -- -- preprocess "toto.adb", using definition file "prep.def",
1534 -- -- undefined symbol are False.
1536 -- * -c -DVERSION=V101
1537 -- -- preprocess all other sources without a definition file;
1538 -- -- suppressed lined are commented; symbol VERSION has the value
1541 -- "titi.adb" "prep2.def" -s
1542 -- -- preprocess "titi.adb", using definition file "prep2.def";
1543 -- -- list all symbols with their values.
1545 S_GCC_Debug : aliased constant S := "/DEBUG=" &
1558 -- /DEBUG[=debug-level]
1561 -- Specifies how much debugging information is to be included in
1562 -- the resulting object fie.
1564 -- 'debug-level' is one of the following:
1566 -- SYMBOLS (D) Include both debugger symbol records and traceback
1567 -- in the object file.
1569 -- ALL Include debugger symbol records, traceback plus
1570 -- extra debug information in the object file.
1572 -- NONE Excludes both debugger symbol records and traceback
1573 -- from the object file. Same as /NODEBUG.
1575 -- TRACEBACK Includes only traceback records in the object
1576 -- file. This is the default when /DEBUG is not used.
1578 S_GCC_DebugX : aliased constant S := "/NODEBUG " &
1580 -- NODOC (see /Debug)
1582 S_GCC_Dist : aliased constant S := "/DISTRIBUTION_STUBS=" &
1587 -- /NODISTRIBUTION_STUBS (D)
1588 -- /DISTRIBUTION_STUBS[=dist-opt]
1590 -- 'dist-opt' is either RECEIVER (the default) or SENDER and indicates
1591 -- that stubs for use in distributed programs (see the Distributed
1592 -- Systems Annex of the Ada RM) should be generated.
1594 S_GCC_DistX : aliased constant S := "/NODISTRIBUTION_STUBS " &
1595 "!-gnatzr,!-gnatzc";
1596 -- NODOC (see /DISTRIBUTION_STUBS)
1598 S_GCC_Error : aliased constant S := "/ERROR_LIMIT=#" &
1600 -- /NOERROR_LIMIT (D)
1603 -- NNN is a decimal integer in the range of 1 to 999999 and limits the
1604 -- number of error messages to be generated to that number. Once that
1605 -- number has been reached, the compilation is abandoned.
1606 -- Specifying 999999 is equivalent to /NOERROR_LIMIT.
1608 S_GCC_ErrorX : aliased constant S := "/NOERROR_LIMIT " &
1610 -- NODOC (see /ERROR_LIMIT)
1612 S_GCC_Expand : aliased constant S := "/EXPAND_SOURCE " &
1614 -- /NOEXPAND_SOURCE (D)
1617 -- Produces a listing of the expanded code in Ada source form. For
1618 -- example, all tasking constructs are reduced to appropriate run-time
1621 S_GCC_Extend : aliased constant S := "/EXTENSIONS_ALLOWED " &
1623 -- /NOEXTENSIONS_ALLOWED (D)
1624 -- /EXTENSIONS_ALLOWED
1626 -- GNAT specific language extensions allowed.
1628 S_GCC_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' &
1630 -- /EXTERNAL_REFERENCE="name=val"
1632 -- Specifies an external reference to the project manager. Useful only if
1633 -- /PROJECT_FILE is used.
1636 -- /EXTERNAL_REFERENCE="DEBUG=TRUE"
1638 S_GCC_File : aliased constant S := "/FILE_NAME_MAX_LENGTH=#" &
1640 -- /FILE_NAME_MAX_LENGTH=nnn
1642 -- Activates file name "krunching". NNN, a decimal integer in the range
1643 -- 1-999, indicates the maximum allowable length of a file name (not
1644 -- including the ADS or ADB filetype. The default is not to enable file
1647 S_GCC_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
1649 -- /NOFOLLOW_LINKS_FOR_FILES (D)
1650 -- /FOLLOW_LINKS_FOR_FILES
1652 -- Follow links when parsing project files
1654 S_GCC_Force : aliased constant S := "/FORCE_ALI " &
1659 -- In normal operation mode, the .ALI file is not generated if any
1660 -- illegalities are detected in the program. The use of this qualifier
1661 -- forces generation of the .ALI file. This file is marked as being
1662 -- in error, so it cannot be used for binding purposes, but it does
1663 -- contain reasonably complete cross-reference information, and thus may
1664 -- be useful for use by tools (e.g. semantic browing tools or integrated
1665 -- development environments) that are driven from the .ALI file.
1667 S_GCC_Full : aliased constant S := "/FULL_PATH_IN_BRIEF_MESSAGES " &
1669 -- /NOFULL_PATH_IN_BRIEF_MESSAGES (D)
1670 -- /FULL_PATH_IN_BRIEF_MESSAGES
1672 -- When using project files, if some errors or warnings are detected
1673 -- during parsing and verbose mode is not in effect (no use of qualifier
1674 -- /VERBOSE), then error lines start with the full path name of the
1675 -- project file, rather than its simple file name.
1677 S_GCC_GNAT : aliased constant S := "/GNAT_INTERNAL " &
1679 -- /NOGNAT_INTERNAL (D)
1682 -- Internal GNAT implementation mode. This should not be used for
1683 -- applications programs, it is intended only for use by the compiler
1684 -- and its run-time library. For documentation, see the GNAT sources.
1685 -- Note that it implies /WARNINGS=ALL,ERRORS and /STYLE_CHECKS=GNAT
1686 -- so that all standard warnings and all standard style options are
1687 -- turned on. All warnings and style error messages are treated as
1690 S_GCC_Help : aliased constant S := "/HELP " &
1695 -- Output usage information.
1697 S_GCC_Ident : aliased constant S := "/IDENTIFIER_CHARACTER_SET=" &
1720 -- /NOIDENTIFIER_CHARACTER_SET (D)
1721 -- /IDENTIFIER_CHARACTER_SET=char-set
1723 -- Normally GNAT recognizes the Latin-1 character set in source program
1724 -- identifiers, as described in the reference manual. This qualifier
1725 -- causes GNAT to recognize alternate character sets in identifiers.
1726 -- 'char-set' is one of the following strings indicating the character
1729 -- DEFAULT (D) Equivalent to 1, below. Also equivalent to
1730 -- /NOIDENTIFIER_CHARACTER_SET.
1732 -- 1 The basic character set is Latin-1. This character
1733 -- set is defined by ISO standard 8859, part 1. The lower
1734 -- half (character codes 16#00# ... 16#7F#) is identical
1735 -- to standard ASCII coding, but the upper half is used
1736 -- to represent additional characters. This includes
1737 -- extended letters used by European languages, such as
1738 -- the umlaut used in German.
1740 -- You may use any of these extended characters freely
1741 -- in character or string literals. In addition, the
1742 -- extended characters that represent letters can be
1743 -- used in identifiers.
1745 -- 2 Latin-2 letters allowed in identifiers, with uppercase
1746 -- and lowercase equivalence.
1748 -- 3 Latin-3 letters allowed in identifiers, with uppercase
1749 -- and lower case equivalence.
1751 -- 4 Latin-4 letters allowed in identifiers, with uppercase
1752 -- and lower case equivalence.
1754 -- PC IBM PC code page 437. This code page is the normal
1755 -- default for PCs in the U.S. It corresponds to the
1756 -- original IBM PC character set. This set has some, but
1757 -- not all, of the extended Latin-1 letters, but these
1758 -- letters do not have the same encoding as Latin-1. In
1759 -- this mode, these letters are allowed in identifiers
1760 -- with uppercase and lowercase equivalence.
1762 -- PC850 This code page (850) is a modification of 437 extended
1763 -- to include all the Latin-1 letters, but still not with
1764 -- the usual Latin-1 encoding. In this mode, all these
1765 -- letters are allowed in identifiers with uppercase and
1766 -- lower case equivalence.
1768 -- FULL_UPPER Any character in the range 80-FF allowed in
1769 -- identifiers, and all are considered distinct. In
1770 -- other words, there are no uppercase and lower case
1771 -- equivalences in this range.
1773 -- NO_UPPER No upper-half characters in the range 80-FF are
1774 -- allowed in identifiers. This gives Ada 95
1775 -- compatibility for identifier names.
1777 -- WIDE GNAT allows wide character codes to appear in
1778 -- character and string literals, and also optionally
1779 -- in identifiers. See the /WIDE_CHARACTER_ENCODING
1780 -- qualifier for information on encoding formats.
1782 S_GCC_IdentX : aliased constant S := "/NOIDENTIFIER_CHARACTER_SET " &
1784 -- NODOC (see /IDENTIFIER_CHARACTER_SET)
1786 S_GCC_Ignore : aliased constant S := "/IGNORE_REP_CLAUSES " &
1788 -- /IGNORE_REP_CLAUSES
1790 -- Causes all representation clauses to be ignored and treated as
1791 -- comments. Useful when compiling foreign code (for example when ASIS
1792 -- is used to analyze such code).
1794 S_GCC_Immed : aliased constant S := "/IMMEDIATE_ERRORS " &
1796 -- /NOIMMEDIATE_ERRORS (D)
1797 -- /IMMEDIATE_ERRORS
1799 -- Causes errors to be displayed as soon as they are encountered, rather
1800 -- than after compilation is terminated. If GNAT terminates prematurely
1801 -- or goes into an infinite loop, the last error message displayed may
1802 -- help to pinpoint the culprit.
1804 S_GCC_Inline : aliased constant S := "/INLINE=" &
1812 -- /INLINE[=keyword]
1814 -- Selects the level of inlining for your program. In the absence of this
1815 -- qualifier, GNAT does not attempt inlining across units and does not
1816 -- need to access the bodies of subprograms for which "pragma Inline" is
1817 -- specified if they are not in the current unit.
1819 -- The supported keywords are as follows:
1821 -- PRAGMA (D) Recognize and process "Inline" pragmas. However,
1822 -- for the inlining to actually occur, optimization
1823 -- must be enabled. This enables inlining across unit
1824 -- boundaries, that is, inlining a call in one unit of
1825 -- a subprogram declared in a with'ed unit. The compiler
1826 -- will access these bodies, creating an extra source
1827 -- dependency for the resulting object file, and where
1828 -- possible, the call will be inlined.
1830 -- This qualifier also turns on full optimization and
1831 -- requests GNAT to try to attempt automatic inlining
1832 -- of small subprograms within a unit.
1834 -- Specifying /OPTIMIZE=NONE will disable the main effect
1835 -- of this qualifier, but you may specify other
1836 -- optimization options, to get either lower
1837 -- (/OPTIMIZE=SOME) or higher (/OPTIMIZE=UNROLL_LOOPS)
1838 -- levels of optimization.
1840 -- FULL Front end inlining. The front end inlining activated
1841 -- by this switch is generally more extensive, and quite
1842 -- often more effective than the standard PRAGMA inlining
1843 -- mode. It will also generate additional dependencies.
1845 -- SUPPRESS Suppresses all inlining, even if other optimization
1846 -- or inlining switches are set.
1848 S_GCC_InlineX : aliased constant S := "/NOINLINE " &
1850 -- NODOC (see /INLINE)
1852 S_GCC_Intsrc : aliased constant S := "/INTERSPERSE_SOURCE " &
1855 -- /NO_INTERSPERSE_SOURCE (D)
1856 -- /INTERSPERSE_SOURCE
1858 -- Causes output from /XDEBUG or /EXPAND_SOURCE to be interspersed with
1859 -- lines from the original source file, output as comment lines with the
1860 -- associated line number.
1862 S_GCC_Just : aliased constant S := "/JUSTIFY_MESSAGES=#" &
1865 -- /NO_JUSTIFY_MESSAGES (D)
1866 -- /JUSTIFY_MESSAGES=nnn
1868 -- Causes error messages to be reformatted so that a message and all its
1869 -- continuation lines count as one warning or error in the statistics on
1870 -- total errors, and the message is broken down into lines (justified) so
1871 -- that no line is longer than nnn characters. The default message
1872 -- behavior (each message counted separately and not reformatted to fit
1873 -- a particular line length) can be obtained using /NO_JUSTIFY_MESSAGES.
1875 S_GCC_JustX : aliased constant S := "/NO_JUSTIFY_MESSAGES " &
1878 -- NODOC (see /JUSTIFY_MESSAGES)
1880 S_GCC_Length : aliased constant S := "/MAX_LINE_LENGTH=#" &
1882 -- /MAX_LINE_LENGTH=nnn
1884 -- Set maximum line length.
1885 -- The length of lines must not exceed the given value nnn.
1887 S_GCC_List : aliased constant S := "/LIST " &
1892 -- Cause a full listing of the file to be generated. In the case where
1893 -- a body is compiled, the corresponding spec is also listed, along
1894 -- with any subunits.
1896 S_GCC_Mapping : aliased constant S := "/MAPPING_FILE=<" &
1898 -- /MAPPING_FILE=file_name
1900 -- Use mapping file file_name
1902 -- A mapping file is a way to communicate to the compiler two mappings:
1903 -- from unit names to file names (without any directory information) and
1904 -- from file names to path names (with full directory information).
1905 -- These mappings are used by the compiler to short-circuit the path
1908 -- The use of mapping files is not required for correct operation of the
1909 -- compiler, but mapping files can improve efficiency, particularly when
1910 -- sources are read over a slow network connection. In normal operation,
1911 -- you need not be concerned with the format or use of mapping files,
1912 -- and /MAPPING_FILE is not a qualifier that you would use explicitly.
1913 -- It is intended only for use by automatic tools such as GNAT MAKE
1914 -- running under the project file facility. The description here of the
1915 -- format of mapping files is provided for completeness and for possible
1916 -- use by other tools.
1918 -- A mapping file is a sequence of sets of three lines. In each set, the
1919 -- first line is the unit name, in lower case, with "%s" appended for
1920 -- specifications and "%b" appended for bodies; the second line is the
1921 -- file name; and the third line is the path name.
1927 -- /gnat/project1/sources/main.2_ada
1929 -- When qualifier ?MAPPING_FILE is specified, the compiler will create in
1930 -- memory the two mappings from the specified file. If there is any
1931 -- problem (non existent file, truncated file or duplicate entries),
1932 -- no mapping will be created.
1934 -- Several /MAPPING_FILE qualifiers may be specified; however, only the
1935 -- last one on the command line will be taken into account.
1937 -- When using a project file, GNAT MAKE creates a temporary mapping file
1938 -- and communicates it to the compiler using this switch.
1940 S_GCC_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" &
1947 -- /MESSAGES_PROJECT_FILE[=messages-option]
1949 -- Specifies the "verbosity" of the parsing of project files.
1950 -- messages-option may be one of the following:
1952 -- DEFAULT (D) No messages are output if there is no error or warning.
1954 -- MEDIUM A small number of messages are output.
1956 -- HIGH A great number of messages are output, most of them not
1957 -- being useful for the user.
1959 S_GCC_Nesting : aliased constant S := "/MAX_NESTING=#" &
1963 -- Set maximum level of nesting of constructs (including subprograms,
1964 -- loops, blocks, packages, and conditionals).
1965 -- The level of nesting must not exceed the given value nnn.
1966 -- A value of zero disable this style check (not enabled by default).
1968 S_GCC_Noadc : aliased constant S := "/NO_GNAT_ADC " &
1972 -- Cause the compiler to ignore any configuration pragmas file GNAT.ADC
1973 -- in the default directory. Implied by qualifier /PROJECT_FILE.
1974 -- Often used in conjunction with qualifier /CONFIGURATION_PRAGMAS_FILE.
1976 S_GCC_Noload : aliased constant S := "/NOLOAD " &
1980 -- Cause the compiler to operate in semantic check mode with full
1981 -- checking for all illegalities specified in the reference manual, but
1982 -- without generation of any source code (no object or ALI file
1985 -- Since dependent files must be accessed, you must follow the GNAT
1986 -- semantic restrictions on file structuring to operate in this mode:
1988 -- o The needed source files must be accessible.
1989 -- o Each file must contain only one compilation unit.
1990 -- o The file name and unit name must match.
1992 -- The output consists of error messages as appropriate. No object file
1993 -- or ALI file is generated. The checking corresponds exactly to the
1994 -- notion of legality in the Ada reference manual.
1996 -- Any unit can be compiled in semantics-checking-only mode, including
1997 -- units that would not normally be compiled (generic library units,
1998 -- subunits, and specifications where a separate body is present).
2000 S_GCC_Nostinc : aliased constant S := "/NOSTD_INCLUDES " &
2004 -- Do not look in the default directory for source files of the runtime.
2006 S_GCC_Nostlib : aliased constant S := "/NOSTD_LIBRARIES " &
2010 -- Do not look for library files in the system default directory.
2012 S_GCC_Opt : aliased constant S := "/OPTIMIZE=" &
2014 "-O2,!-O0,!-O1,!-O3 " &
2016 "-O0,!-O1,!-O2,!-O3 " &
2018 "-O1,!-O0,!-O2,!-O3 " &
2020 "-Os,!-O0,!-O1,!-O2,!-O3 " &
2022 "-O1,!-O0,!-O2,!-O3 " &
2025 "NO_STRICT_ALIASING " &
2026 "-fno-strict-aliasing " &
2028 "-O3,!-O0,!-O1,!-O2";
2030 -- /OPTIMIZE[=(keyword[,...])]
2032 -- Selects the level of optimization for your program. The supported
2033 -- keywords are as follows:
2035 -- ALL (D) Perform most optimizations, including those that
2036 -- may be expensive.
2038 -- NONE Do not do any optimizations. Same as /NOOPTIMIZE.
2040 -- SOME Perform some optimizations, but omit ones that
2041 -- are costly in compilation time.
2043 -- SPACE Optimize space usage
2045 -- DEVELOPMENT Same as SOME.
2047 -- INLINING Full optimization, and also attempt automatic inlining
2048 -- of small subprograms within a unit
2050 -- UNROLL_LOOPS Try to unroll loops. This keyword may be specified
2051 -- with any keyword above other than NONE. Loop
2052 -- unrolling usually, but not always, improves the
2053 -- performance of programs.
2055 -- NO_STRICT_ALIASING
2056 -- Suppress aliasing analysis. When optimization is
2057 -- enabled (ALL or SOME above), the compiler assumes
2058 -- that pointers do in fact point to legitimate values
2059 -- of the pointer type (allocated from the proper pool).
2060 -- If this assumption is violated, e.g. by the use of
2061 -- unchecked conversion, then it may be necessary to
2062 -- suppress this assumption using this keyword (which
2063 -- may be specified only in conjunction with any
2064 -- keyword above, other than NONE).
2066 S_GCC_OptX : aliased constant S := "/NOOPTIMIZE " &
2067 "-O0,!-O1,!-O2,!-O3";
2068 -- NODOC (see /OPTIMIZE)
2070 S_GCC_Output : aliased constant S := "/OUTPUT_FILE=<" &
2072 -- /OUTPUT_FILE=fname
2074 -- This has the same effect as /LIST except that the output is written
2075 -- to a file instead of to standard output. If the given fname
2076 -- does not start with a period, then it is the full name of the file
2077 -- to be written. If fname starts with a period, the name of the file
2078 -- is the concatenation of to the name of the file being compiled with
2079 -- fname where the period is replace by an underline. For example, if
2080 -- file xyz.adb is compiled with -gnatl=.lst, then the output is written
2081 -- to file xyz.adb_lst.
2083 S_GCC_Polling : aliased constant S := "/POLLING " &
2088 -- Enable polling. See the description of pragma Polling in the GNAT
2089 -- Reference Manual for full details.
2091 S_GCC_Project : aliased constant S := "/PROJECT_FILE=<" &
2093 -- /PROJECT_FILE=filename
2095 -- Specifies the main project file to be used. The project files rooted
2096 -- at the main project file will be parsed before the invocation of the
2097 -- compiler. The source and object directories to be searched will be
2098 -- communicated to the compiler through logical names
2099 -- ADA_PRJ_INCLUDE_FILE and ADA_PRJ_OBJECTS_FILE.
2101 S_GCC_Psta : aliased constant S := "/PRINT_STANDARD " &
2105 -- cause the compiler to output a representation of package Standard
2106 -- in a form very close to standard Ada. It is not quite possible to
2107 -- do this and remain entirely Standard (since new numeric base types
2108 -- cannot be created in standard Ada), but the output is easily
2109 -- readable to any Ada programmer, and is useful to determine the
2110 -- characteristics of target dependent types in package Standard.
2112 S_GCC_Report : aliased constant S := "/REPORT_ERRORS=" &
2123 -- /NOREPORT_ERRORS (D)
2124 -- /REPORT_ERRORS[=(keyword[,...])]
2126 -- Change the way errors are reported. The following keywords are
2129 -- VERBOSE (D) Verbose mode. Full error output with source lines
2132 -- BRIEF Generate the brief format error messages to
2133 -- SYS$OUTPUT as well as the verbose format message or
2136 -- FULL Normally, the compiler suppresses error messages that
2137 -- are likely to be redundant. This keyword causes all
2138 -- error messages to be generated. One particular effect
2139 -- is for the case of references to undefined variables.
2140 -- If a given variable is referenced several times, the
2141 -- normal format of messages produces one error. With
2142 -- FULL, each undefined reference produces a separate
2145 -- IMMEDIATE Normally, the compiler saves up error messages and
2146 -- generates them at the end of compilation in proper
2147 -- sequence. This keyword causes error messages to be
2148 -- generated as soon as they are detected. The use of
2149 -- IMMEDIATE usually causes error messages to be
2150 -- generated out of sequence. Use it when the compiler
2151 -- blows up due to an internal error. In this case, the
2152 -- error messages may be lost. Sometimes blowups are
2153 -- the result of mishandled error messages, so you may
2154 -- want to run with this keyword to determine whether
2155 -- any error messages were generated.
2157 -- DEFAULT Turn off VERBOSE and BRIEF. Same as /NOREPORT_ERRORS.
2159 S_GCC_ReportX : aliased constant S := "/NOREPORT_ERRORS " &
2161 -- NODOC (see /REPORT_ERRORS)
2163 S_GCC_Repinfo : aliased constant S := "/REPRESENTATION_INFO=" &
2180 -- /NOREPRESENTATION_INFO (D)
2181 -- /REPRESENTATION_INFO[=(keyword[,...])]
2183 -- This qualifier controls output from the compiler of a listing showing
2184 -- representation information for declared types and objects.
2186 -- ARRAYS (D) Size and alignment information is listed for
2187 -- declared array and record types.
2189 -- ARRAYS_FILE Similar to ARRAYS, but the output is to a file
2190 -- with the name 'file_rep' where 'file' is the name
2191 -- of the corresponding source file.
2193 -- NONE no information is output (equivalent to omitting
2194 -- the /REPRESENTATION_INFO qualifiers).
2196 -- OBJECTS Size and alignment information is listed for all
2197 -- declared types and objects.
2199 -- OBJECTS_FILE Similar to OBJECTS, but the output is to a file
2200 -- with the name 'file_rep' where 'file' is the name
2201 -- of the corresponding source file.
2203 -- SYMBOLIC Symbolic expression information for values that
2204 -- are computed at run time for variant records.
2206 -- SYMBOLIC_FILE Similar to SYMBOLIC, but the output is to a file
2207 -- with the name 'file_rep' where 'file' is the name
2208 -- of the corresponding source file.
2210 -- DEFAULT Equivalent to ARRAYS.
2212 S_GCC_RepinfX : aliased constant S := "/NOREPRESENTATION_INFO " &
2214 -- NODOC (see /REPRESENTATION_INFO)
2216 S_GCC_RTS : aliased constant S := "/RUNTIME_SYSTEM=|" &
2218 -- /RUNTIME_SYSTEM=xxx
2220 -- Build against an alternate runtime system named xxx or RTS-xxx.
2222 S_GCC_Search : aliased constant S := "/SEARCH=*" &
2224 -- /SEARCH=(directory[,...])
2226 -- When looking for source files also look in directories specified.
2228 S_GCC_Style : aliased constant S := "/STYLE_CHECKS=" &
2257 "NOARRAY_INDEXES " &
2267 "DOS_LINE_ENDINGS " &
2269 "NODOS_LINE_ENDINGS " &
2307 "STANDARD_CASING " &
2309 "NOSTANDARD_CASING " &
2311 "ORDERED_SUBPROGRAMS " &
2313 "NOORDERED_SUBPROGRAMS " &
2327 "STATEMENTS_AFTER_THEN_ELSE " &
2329 "NOSTATEMENTS_AFTER_THEN_ELSE " &
2335 "UNNECESSARY_BLANK_LINES " &
2337 "NOUNNECESSARY_BLANK_LINES " &
2343 -- /NOSTYLE_CHECKS (D)
2344 -- /STYLE_CHECKS[=(keyword,[...])]
2346 -- Normally, GNAT permits any code layout consistent with the reference
2347 -- manual requirements. This qualifier imposes style checking on the
2348 -- input source code. The following keywords are supported:
2350 -- ALL_BUILTIN (D) Equivalent to the following list of options:
2351 -- 3, ATTRIBUTE, BLANKS, COMMENTS, END, VTABS,
2352 -- HTABS, IF_THEN, KEYWORD, LAYOUT, LINE_LENGTH,
2353 -- PRAGMA, REFERENCES, SPECS, TOKEN.
2355 -- 1 .. 9 Specify indentation level from 1 to 9.
2356 -- The general style of required indentation is as
2357 -- specified by the examples in the Ada Reference
2358 -- Manual. Full line comments must be aligned with
2359 -- the -- starting on a column that is a multiple
2360 -- of the alignment level.
2362 -- ATTRIBUTE Check attribute casing.
2363 -- Attribute names, including the case of keywords
2364 -- such as digits used as attributes names,
2365 -- must be written in mixed case, that is,
2366 -- the initial letter and any letter following an
2367 -- underscore must be uppercase.
2368 -- All other letters must be lowercase.
2370 -- ARRAY_INDEXES Check indexes of array attributes.
2371 -- For array attributes First, Last, Range,
2372 -- or Length, the index number must be omitted
2373 -- for one-dimensional arrays and is required
2374 -- for multi-dimensional arrays.
2376 -- BLANKS Blanks not allowed at statement end.
2377 -- Trailing blanks are not allowed at the end of
2378 -- statements. The purpose of this rule, together
2379 -- with option HTABS (no horizontal tabs), is to
2380 -- enforce a canonical format for the use of
2381 -- blanks to separate source tokens.
2383 -- COMMENTS Check comments.
2384 -- Comments must meet the following set of rules:
2386 -- * The "--" that starts the column must either
2387 -- start in column one, or else at least one
2388 -- blank must precede this sequence.
2390 -- * Comments that follow other tokens on a line
2391 -- must have at least one blank following the
2392 -- "--" at the start of the comment.
2394 -- * Full line comments must have two blanks
2395 -- following the "--" that starts the comment,
2396 -- with the following exceptions.
2398 -- * A line consisting only of the "--"
2399 -- characters, possibly preceded by blanks is
2402 -- * A comment starting with "--x" where x is
2403 -- a special character is permitted. This
2404 -- allows proper processing of the output
2405 -- generated by specialized tools including
2406 -- gnatprep (where --! is used) and the SPARK
2407 -- annnotation language (where --# is used).
2408 -- For the purposes of this rule, a special
2409 -- character is defined as being in one of the
2410 -- ASCII ranges 16#21#..16#2F# or
2413 -- * A line consisting entirely of minus signs,
2414 -- possibly preceded by blanks, is permitted.
2415 -- This allows the construction of box
2416 -- comments where lines of minus signs are
2417 -- used to form the top and bottom of the box.
2419 -- * If a comment starts and ends with "--" is
2420 -- permitted as long as at least one blank
2421 -- follows the initial "--". Together with
2422 -- the preceding rule, this allows the
2423 -- construction of box comments, as shown in
2424 -- the following example:
2426 -- ---------------------------
2427 -- -- This is a box comment --
2428 -- ---------------------------
2430 -- DOS_LINE_ENDINGS Check that no DOS line terminators are present
2431 -- All lines must be terminated by a single
2432 -- ASCII.LF character. In particular the DOS line
2433 -- terminator sequence CR / LF is not allowed).
2435 -- END Check end/exit labels.
2436 -- Optional labels on end statements ending
2437 -- subprograms and on exit statements exiting
2438 -- named loops, are required to be present.
2440 -- GNAT Enforces a set of style conventions that
2441 -- match the style used in the GNAT source code.
2442 -- This maybe useful when developing code that
2443 -- is eventually intended to be incorporated into
2444 -- GNAT. For further details, see GNAT sources.
2446 -- HTABS No horizontal tabs.
2447 -- Horizontal tab characters are not permitted in
2448 -- the source text. Together with the BLANKS
2449 -- (no blanks at end of line) option, this
2450 -- enforces a canonical form for the use of blanks
2451 -- to separate source tokens.
2453 -- IF_THEN Check if-then layout.
2454 -- The keyword then must appear either on the
2455 -- same line as the corresponding if, or on a line
2456 -- on its own, lined up under the if with at least
2457 -- one non-blank line in between containing all or
2458 -- part of the condition to be tested.
2460 -- KEYWORD Check keyword casing.
2461 -- All keywords must be in lower case (with the
2462 -- exception of keywords such as digits used as
2463 -- attribute names to which this check does not
2466 -- LAYOUT Check layout.
2467 -- Layout of statement and declaration constructs
2468 -- must follow the recommendations in the Ada
2469 -- Reference Manual, as indicated by the form of
2470 -- the syntax rules. For example an else keyword
2471 -- must be lined up with the corresponding if
2474 -- There are two respects in which the style rule
2475 -- enforced by this check option are more liberal
2476 -- than those in the Ada Reference Manual.
2477 -- First in the case of record declarations,
2478 -- it is permissible to put the record keyword on
2479 -- the same line as the type keyword, and then
2480 -- the end in end record must line up under type.
2481 -- For example, either of the following two
2482 -- layouts is acceptable:
2495 -- Second, in the case of a block statement,
2496 -- a permitted alternative is to put the block
2497 -- label on the same line as the declare or begin
2498 -- keyword, and then line the end keyword up under
2499 -- the block label. For example both the following
2505 -- A : Integer := 3;
2512 -- A : Integer := 3;
2517 -- The same alternative format is allowed for
2518 -- loops. For example, both of the following are
2523 -- Clear : while J < 10 loop
2528 -- while J < 10 loop
2534 -- LINE_LENGTH Check maximum line length.
2535 -- The length of source lines must not exceed 79
2536 -- characters, including any trailing blanks
2537 -- The value of 79 allows convenient display on
2538 -- an 80 character wide device or window, allowing
2539 -- for possible special treatment of 80 character
2542 -- NONE Clear any previously set style checks.
2544 -- ORDERED_SUBPROGRAMS Check order of subprogram bodies.
2545 -- All subprogram bodies in a given scope (e.g.
2546 -- a package body) must be in alphabetical order.
2547 -- The ordering rule uses normal Ada rules for
2548 -- comparing strings, ignoring casing of letters,
2549 -- except that if there is a trailing numeric
2550 -- suffix, then the value of this suffix is used
2551 -- in the ordering (e.g. Junk2 comes before
2554 -- PRAGMA Check pragma casing.
2555 -- Pragma names must be written in mixed case,
2556 -- that is, the initial letter and any letter
2557 -- following an underscore must be uppercase.
2558 -- All other letters must be lowercase.
2560 -- REFERENCES Check references.
2561 -- All identifier references must be cased in the
2562 -- same way as the corresponding declaration.
2563 -- No specific casing style is imposed on
2564 -- identifiers. The only requirement is for
2565 -- consistency of references with declarations.
2567 -- SPECS Check separate specs.
2568 -- Separate declarations ("specs") are required
2569 -- for subprograms (a body is not allowed to serve
2570 -- as its own declaration). The only exception is
2571 -- that parameterless library level procedures are
2572 -- not required to have a separate declaration.
2573 -- This exception covers the most frequent form of
2574 -- main program procedures.
2576 -- STANDARD_CASING Check casing of entities in Standard.
2577 -- Any identifier from Standard must be cased to
2578 -- match the presentation in the Ada Reference
2579 -- Manual (for example, Integer and ASCII.NUL).
2581 -- TOKEN Check token spacing.
2582 -- The following token spacing rules are enforced:
2584 -- * The keywords abs and not must be followed
2587 -- * The token => must be surrounded by spaces.
2589 -- * The token <> must be preceded by a space or
2590 -- a left parenthesis.
2592 -- * Binary operators other than ** must be
2593 -- surrounded by spaces. There is no
2594 -- restriction on the layout of the ** binary
2597 -- * Colon must be surrounded by spaces.
2599 -- * Colon-equal (assignment) must be surrounded
2602 -- * Comma must be the first non-blank character
2603 -- on the line, or be immediately preceded by
2604 -- a non-blank character, and must be followed
2607 -- * If the token preceding a left paren ends
2608 -- with a letter or digit, then a space must
2609 -- separate the two tokens.
2611 -- * A right parenthesis must either be the
2612 -- first non-blank character on a line, or it
2613 -- must be preceded by a non-blank character.
2615 -- * A semicolon must not be preceded by
2616 -- a space, and must not be followed by
2617 -- a non-blank character.
2619 -- * A unary plus or minus may not be followed
2622 -- * A vertical bar must be surrounded by
2625 -- In the above rules, appearing in column one is
2626 -- always permitted, that is, counts as meeting
2627 -- either a requirement for a required preceding
2628 -- space, or as meeting a requirement for no
2631 -- Appearing at the end of a line is also always
2632 -- permitted, that is, counts as meeting either
2633 -- a requirement for a following space,
2634 -- or as meeting a requirement for no following
2637 -- UNNECESSARY_BLANK_LINES
2638 -- Check for unnecessary blank lines.
2639 -- A blank line is considered unnecessary if it
2640 -- appears at the end of the file, or if more
2641 -- than one blank line occurs in sequence.
2643 -- VTABS No form feeds or vertical tabs.
2644 -- Form feeds or vertical tab characters are not
2645 -- permitted in the source text.
2647 -- XTRA_PARENS Check for the use of an unnecessary extra
2648 -- level of parentheses (C - style) around
2649 -- conditions in if statements, while statements
2650 -- and exit statements.
2652 S_GCC_StyleX : aliased constant S := "/NOSTYLE_CHECKS " &
2654 -- NODOC (see /STYLE_CHECKS)
2656 S_GCC_Subdirs : aliased constant S := "/SUBDIRS=<" &
2660 -- The actual directories (object, exec, library, ...) are subdirectories
2661 -- of the directory specified in the project file. If the subdirectory
2662 -- does not exist, it is created automatically.
2664 S_GCC_Symbol : aliased constant S := "/SYMBOL_PREPROCESSING=" & '"' &
2666 -- /SYMBOL_PREPROCESSING="symbol=value"
2668 -- Define or redefine a preprocessing symbol, associated with value.
2669 -- If "=value" is not specified, then the value of the symbol is True.
2670 -- A symbol is an identifier, following normal Ada (case-insensitive)
2671 -- rules for its syntax, and value is any sequence (including an empty
2672 -- sequence) of characters from the set (letters, digits, period,
2673 -- underline). Ada reserved words may be used as symbols, with the
2674 -- exceptions of "if", "else", "elsif", "end", "and", "or" and "then".
2676 -- A symbol declared with this qualifier on the command line replaces
2677 -- a symbol with the same name either in a definition file or specified
2678 -- with a switch -D in the preprocessor data file.
2680 -- This qualifier is similar to qualifier /ASSOCIATE of
2681 -- GNAT PREPROCESSING.
2683 S_GCC_Syntax : aliased constant S := "/SYNTAX_ONLY " &
2685 -- /NOSYNTAX_ONLY (D)
2688 -- Run GNAT in syntax checking only mode. You can check a series of
2689 -- files in a single command, and can use wild cards to specify such a
2692 -- You may use other qualifiers in conjunction with this qualifier. In
2693 -- particular, /LIST and /REPORT_ERRORS=VERBOSE are useful to control the
2694 -- format of any generated error messages.
2696 -- The output is simply the error messages, if any. No object file or ALI
2697 -- file is generated by a syntax-only compilation. Also, no units other
2698 -- than the one specified are accessed. For example, if a unit "X" with's
2699 -- a unit "Y", compiling unit "X" in syntax check only mode does not
2700 -- access the source file containing unit "Y".
2702 -- Normally, GNAT allows only a single unit in a source file. However,
2703 -- this restriction does not apply in syntax-check-only mode, and it is
2704 -- possible to check a file containing multiple compilation units
2705 -- concatenated together. This is primarily used by the GNAT CHOP
2708 S_GCC_Table : aliased constant S := "/TABLE_MULTIPLIER=#" &
2710 -- /TABLE_MULTIPLIER=nnn
2712 -- All compiler tables start at nnn times usual starting size.
2714 S_GCC_Trace : aliased constant S := "/TRACE_UNITS " &
2719 -- This switch that does for the frontend what /VERBOSE does for the
2720 -- backend. The system prints the name of each unit, either a compilation
2721 -- unit or nested unit, as it is being analyzed.
2723 S_GCC_Tree : aliased constant S := "/TREE_OUTPUT " &
2728 -- Cause GNAT to write the internal tree for a unit to a file (with the
2729 -- filetype ATB for a body or ATS for a spec). This is not normally
2730 -- required, but is used by separate analysis tools. Typically these
2731 -- tools do the necessary compilations automatically, so you should never
2732 -- have to specify this switch in normal operation.
2734 S_GCC_Trys : aliased constant S := "/TRY_SEMANTICS " &
2739 -- In normal operation mode the compiler first parses the program and
2740 -- determines if there are any syntax errors. If there are, appropriate
2741 -- error messages are generated and compilation is immediately
2742 -- terminated. This qualifier tells GNAT to continue with semantic
2743 -- analysis even if syntax errors have been found. This may enable the
2744 -- detection of more errors in a single run. On the other hand, the
2745 -- semantic analyzer is more likely to encounter some internal fatal
2746 -- error when given a syntactically invalid tree.
2748 S_GCC_Units : aliased constant S := "/UNITS_LIST " &
2750 -- /NOUNITS_LIST (D)
2753 -- Print a list of units required by this compilation on SYS$OUTPUT. The
2754 -- listing includes all units on which the unit being compiled depends
2755 -- either directly or indirectly.
2757 S_GCC_Unique : aliased constant S := "/UNIQUE_ERROR_TAG " &
2759 -- /NOUNIQUE_ERROR_TAG (D)
2760 -- /UNIQUE_ERROR_TAG
2762 -- Tag compiler error messages with the string "error: ".
2764 S_GCC_Upcase : aliased constant S := "/UPPERCASE_EXTERNALS " &
2766 -- /NOUPPERCASE_EXTERNALS (D)
2767 -- /UPPERCASE_EXTERNALS
2769 -- Fold default and explicit external names in pragmas Import and Export
2770 -- to uppercase for compatibility with the default behavior of DEC C.
2772 S_GCC_Valid : aliased constant S := "/VALIDITY_CHECKING=" &
2821 -- /VALIDITY_CHECKING[=(keyword,[...])]
2823 -- Control level of validity checking.
2825 -- DEFAULT (D) In this mode checks are made to prevent
2826 -- erroneous behavior in accordance with the RM.
2827 -- Notably extra checks may be needed for case
2828 -- statements and subscripted array assignments.
2830 -- NONE No special checks for invalid values are
2831 -- performed. This means that references to
2832 -- uninitialized variables can cause erroneous
2833 -- behavior from constructs like case statements
2834 -- and subscripted array assignments. In this
2835 -- mode, invalid values can lead to erroneous
2838 -- FULL Every assignment is checked for validity, so
2839 -- that it is impossible to assign invalid values.
2840 -- The RM specifically allows such assignments,
2841 -- but in this mode, invalid values can never be
2842 -- assigned, and an attempt to perform such an
2843 -- assignment immediately raises Constraint_Error.
2844 -- This behavior is allowed (but not required) by
2845 -- the RM. This mode is intended as a debugging aid,
2846 -- and may be useful in helping to track down
2847 -- uninitialized variables. It may be useful to
2848 -- use this in conjunction with the Normalize_Scalars
2849 -- pragma which attempts to initialize with invalid
2850 -- values where possible.
2852 S_GCC_Verbose : aliased constant S := "/VERBOSE " &
2857 -- Show commands generated by the GCC driver. Normally used only for
2858 -- debugging purposes or if you need to be sure what version of the
2859 -- compiler you are executing.
2861 S_GCC_Verb_Asm : aliased constant S := "/VERBOSE_ASM " &
2862 "-S,-verbose_asm,!-c";
2866 -- Use to cause the assembler source file to be generated, using S as the
2867 -- filetype, instead of the object file. This may be useful if you need
2868 -- to examine the generated assembly code.
2870 S_GCC_Warn : aliased constant S := "/WARNINGS=" &
2872 "!-gnatws,!-gnatwe " &
2885 "FAILING_ASSERTIONS " &
2887 "NO_FAILING_ASSERTIONS " &
2889 "BAD_FIXED_VALUES " &
2891 "NO_BAD_FIXED_VALUES " &
2897 "MISSING_COMPONENT_CLAUSES " &
2899 "NOMISSING_COMPONENT_CLAUSES " &
2901 "IMPLICIT_DEREFERENCE " &
2903 "NO_IMPLICIT_DEREFERENCE " &
2907 "UNREFERENCED_FORMALS " &
2909 "NOUNREFERENCED_FORMALS " &
2911 "UNRECOGNIZED_PRAGMAS " &
2913 "NOUNRECOGNIZED_PRAGMAS " &
2921 "NOIMPLEMENTATION " &
2927 "CONSTANT_VARIABLES " &
2929 "NOCONSTANT_VARIABLES " &
2937 "NOMODIFIED_UNREF " &
2945 "OUT_PARAM_UNREF " &
2947 "NOOUT_PARAM_UNREF " &
2949 "INEFFECTIVE_INLINE " &
2951 "NOINEFFECTIVE_INLINE " &
2955 "PARAMETER_ORDER " &
2957 "NOPARAMETER_ORDER " &
2959 "NOMISSING_PARENS " &
2967 "NOOBJECT_RENAMES " &
2976 "-Wuninitialized " &
2981 "VARIABLES_UNINITIALIZED " &
2983 "NOVARIABLES_UNINITIALIZED " &
2985 "LOWBOUND_ASSUMED " &
2987 "NOLOWBOUND_ASSUMED " &
2989 "WARNINGS_OFF_PRAGMAS " &
2991 "NO_WARNINGS_OFF_PRAGMAS " &
2993 "IMPORT_EXPORT_PRAGMAS " &
2995 "NOIMPORT_EXPORT_PRAGMAS " &
2997 "LOCAL_RAISE_HANDLING " &
2999 "NOLOCAL_RAISE_HANDLING " &
3001 "ADA_2005_COMPATIBILITY " &
3003 "NOADA_2005_COMPATIBILITY " &
3005 "UNCHECKED_CONVERSIONS " &
3007 "NOUNCHECKED_CONVERSIONS " &
3011 -- Suppress the output of all warning messages from the GNAT front end.
3012 -- Note that it does not suppress warnings from the gcc back end.
3014 -- /WARNINGS[=(keyword[,...])]
3016 -- In addition to error messages, corresponding to illegalities as
3017 -- defined in the reference manual, the compiler detects two kinds of
3018 -- warning situations. First, the compiler considers some constructs
3019 -- suspicious and generates a warning message to alert you to a possible
3020 -- error. Second, if the compiler detects a situation that is sure to
3021 -- raise an exception at runtime, it generates a warning message.
3023 -- You may specify the following keywords to change this behavior:
3025 -- DEFAULT (D) The default behavior above.
3027 -- ALL Activate all optional warnings.
3028 -- Activates most optional warning messages,
3029 -- see remaining list in this section for
3030 -- details on optional warning messages that
3031 -- can be individually controlled.
3032 -- The warnings that are not turned on by
3033 -- this option are BIASED_ROUNDING,
3034 -- IMPLICIT_DEREFERENCE, HIDING and
3035 -- ELABORATION. All other optional Ada
3036 -- warnings are turned on.
3038 -- EVERY Activate every optional warning.
3039 -- Activates all optional warnings, including
3040 -- those listed above as exceptions for ALL.
3042 -- NOALL Suppress all optional errors.
3043 -- Suppresses all optional warning messages
3044 -- that can be activated by option ALL.
3046 -- ALL_GCC Request additional messages from the GCC
3047 -- backend. Most of these are not relevant
3050 -- CONDITIONALS Activate warnings for conditional
3051 -- Expressions used in tests that are known
3052 -- to be True or False at compile time. The
3053 -- default is that such warnings are not
3056 -- NOCONDITIONALS Suppress warnings for conditional
3057 -- expressions used in tests that are known
3058 -- to be True or False at compile time.
3060 -- IMPLICIT_DEREFERENCE Activate warnings on implicit dereferencing.
3061 -- The use of a prefix of an access type in an
3062 -- indexed component, slice, or selected component
3063 -- without an explicit .all will generate
3064 -- a warning. With this warning enabled, access
3065 -- checks occur only at points where an explicit
3066 -- .all appears in the source code (assuming no
3067 -- warnings are generated as a result of this
3068 -- option). The default is that such warnings are
3069 -- not generated. Note that /WARNINGS=ALL does not
3070 -- affect the setting of this warning option.
3072 -- NOIMPLICIT_DEREFERENCE Suppress warnings on implicit dereferencing.
3073 -- in indexed components, slices, and selected
3076 -- ELABORATION Activate warnings on missing pragma
3077 -- Elaborate_All statements. The default is
3078 -- that such warnings are not generated.
3080 -- NOELABORATION Suppress warnings on missing pragma
3081 -- Elaborate_All statements.
3083 -- ERRORS Warning messages are to be treated as errors.
3084 -- The warning string still appears, but the
3085 -- warning messages are counted as errors, and
3086 -- prevent the generation of an object file.
3088 -- HIDING Activate warnings on hiding declarations.
3089 -- A declaration is considered hiding if it is
3090 -- for a non-overloadable entity, and it declares
3091 -- an entity with the same name as some other
3092 -- entity that is directly or use-visible. The
3093 -- default is that such warnings are not
3096 -- NOHIDING Suppress warnings on hiding declarations.
3098 -- IMPLEMENTATION Activate warnings for a with of an internal
3099 -- GNAT implementation unit, defined as any unit
3100 -- from the Ada, Interfaces, GNAT, DEC or
3101 -- System hierarchies that is not documented in
3102 -- either the Ada Reference Manual or the GNAT
3103 -- Programmer's Reference Manual. Such units are
3104 -- intended only for internal implementation
3105 -- purposes and should not be with'ed by user
3106 -- programs. The default is that such warnings
3109 -- NOIMPLEMENTATION Disables warnings for a with of an internal
3110 -- GNAT implementation unit.
3112 -- INEFFECTIVE_INLINE Activate warnings on ineffective pragma Inlines
3113 -- Activates warnings for failure of front end
3114 -- inlining (activated by /INLINE=FULL) to inline
3115 -- a particular call. There are many reasons for
3116 -- not being able to inline a call, including most
3117 -- commonly that the call is too complex to
3118 -- inline. This warning can also be turned on
3119 -- using /INLINE=FULL.
3121 -- NOINEFFECTIVE_INLINE Suppress warnings on ineffective pragma Inlines
3122 -- Suppresses warnings on ineffective pragma
3123 -- Inlines. If the inlining mechanism cannot
3124 -- inline a call, it will simply ignore the
3125 -- request silently.
3127 -- MISSING_COMPONENT_CLAUSES
3128 -- Activate warnings for cases when there are
3129 -- component clauses for a record type, but not
3130 -- for every component of the record.
3132 -- NOMISSING_COMPONENT_CLAUSES
3133 -- Suppress warnings for cases when there are
3134 -- missing component clauses for a record type.
3137 -- Activate warnings for cases where parentheses
3138 -- are not used and the result is potential
3139 -- ambiguity from a reader's point of view.
3140 -- For example (not a > b) when a and b are
3141 -- modular means (not (a) > b) and very likely
3142 -- the programmer intended (not (a > b)).
3145 -- Suppress warnings for cases where parentheses
3146 -- are not used and the result is potential
3147 -- ambiguity from a reader's point of view.
3149 -- MODIFIED_UNREF Activates warnings for variables that are
3150 -- assigned (using an initialization value or with
3151 -- one or more assignment statements) but whose
3152 -- value is never read. The warning is suppressed
3153 -- for volatile variables and also for variables
3154 -- that are renamings of other variables or for
3155 -- which an address clause is given. This warning
3156 -- can also be turned on using /WARNINGS/OPTIONAL.
3158 -- NOMODIFIED_UNREF Disables warnings for variables that are
3159 -- assigned or initialized, but never read.
3161 -- NORMAL Sets normal warning mode, in which enabled
3162 -- warnings are issued and treated as warnings
3163 -- rather than errors. This is the default mode.
3164 -- It can be used to cancel the effect of an
3165 -- explicit /WARNINGS=SUPPRESS or
3166 -- /WARNINGS=ERRORS. It also cancels the effect
3167 -- of the implicit /WARNINGS=ERRORS that is
3168 -- activated by the use of /STYLE=GNAT.
3170 -- OBSOLESCENT Activates warnings for calls to subprograms
3171 -- marked with pragma Obsolescent and for use of
3172 -- features in Annex J of the Ada Reference
3173 -- Manual. In the case of Annex J, not all
3174 -- features are flagged. In particular use of the
3175 -- renamed packages (like Text_IO), use of package
3176 -- ASCII and use of the attribute 'Constrained are
3177 -- not flagged, since these are very common and
3178 -- would generate many annoying positive warnings.
3179 -- The default is that such warnings are not
3182 -- NOOBSOLESCENT Disables warnings on use of obsolescent
3185 -- OBJECT_RENAME Activate warnings for non limited objects
3186 -- renaming parameterless functions.
3188 -- NOOBJECT_RENAME Suppress warnings for non limited objects
3189 -- renaming parameterless functions.
3191 -- OPTIONAL Equivalent to ALL.
3193 -- NOOPTIONAL Equivalent to NOALL.
3195 -- OVERLAYS Activate warnings for possibly unintended
3196 -- initialization effects of defining address
3197 -- clauses that cause one variable to overlap
3198 -- another. The default is that such warnings
3201 -- NOOVERLAYS Suppress warnings on possibly unintended
3202 -- initialization effects of defining address
3203 -- clauses that cause one variable to overlap
3206 -- REDUNDANT Activate warnings for redundant constructs.
3207 -- In particular assignments of a variable to
3208 -- itself, and a type conversion that converts
3209 -- an object to its own type. The default
3210 -- is that such warnings are not generated.
3212 -- NOREDUNDANT Suppress warnings for redundant constructs.
3214 -- SUPPRESS Completely suppresse the output of all warning
3215 -- messages. Same as /NOWARNINGS.
3217 -- UNCHECKED_CONVERSIONS Activates warnings on unchecked conversions.
3218 -- Causes warnings to be generated for
3219 -- unchecked conversions when the two types are
3220 -- known at compile time to have different sizes.
3221 -- The default is that such warnings are
3224 -- NOUNCHECKED_CONVERSIONS Suppress warnings for unchecked conversions.
3226 -- UNINITIALIZED Generate warnings for uninitialized variables.
3227 -- This is a GCC option, not an Ada option.
3228 -- You must also specify the /OPTIMIZE qualifier
3229 -- with a value other than NONE (in other words,
3230 -- this keyword works only if optimization is
3233 -- UNREFERENCED_FORMALS Activate warnings on unreferenced formals.
3234 -- Causes a warning to be generated if a formal
3235 -- parameter is not referenced in the body of
3236 -- the subprogram. This warning can also be turned
3237 -- on using option ALL or UNUSED.
3239 -- NOUNREFERENCED_FORMALS Suppress warnings on unreferenced formals.
3240 -- Suppresses warnings for unreferenced formal
3241 -- parameters. Note that the combination UNUSED
3242 -- followed by NOUNREFERENCED_FORMALS has the
3243 -- effect of warning on unreferenced entities
3244 -- other than subprogram formals.
3246 -- UNUSED Activates warnings to be generated for entities
3247 -- that are defined but not referenced, and for
3248 -- units that are with'ed and not referenced. In
3249 -- the case of packages, a warning is also
3250 -- generated if no entities in the package are
3251 -- referenced. This means that if the package
3252 -- is referenced but the only references are in
3253 -- use clauses or renames declarations, a warning
3254 -- is still generated. A warning is also generated
3255 -- for a generic package that is with'ed but never
3256 -- instantiated. In the case where a package or
3257 -- subprogram body is compiled, and there is a
3258 -- with on the corresponding spec that is only
3259 -- referenced in the body, a warning is also
3260 -- generated, noting that the with can be moved
3261 -- to the body. The default is that such warnings
3262 -- are not generated.
3264 -- NOUNUSED Suppress warnings for unused entities and
3267 -- VARIABLES_UNINITIALIZED Activates warnings on unassigned variables.
3268 -- Causes warnings to be generated when a variable
3269 -- is accessed which may not be properly
3271 -- The default is that such warnings are
3274 -- NOVARIABLES_UNINITIALIZED Suppress warnings for uninitialized
3277 S_GCC_WarnX : aliased constant S := "/NOWARNINGS " &
3279 -- NODOC (see /WARNINGS)
3281 S_GCC_No_Back : aliased constant S := "/NO_BACK_END_WARNINGS " &
3283 -- /NO_BACK_END_WARNINGS
3285 -- Inhibit all warning messages of the GCC back-end.
3287 S_GCC_All_Back : aliased constant S := "/ALL_BACK_END_WARNINGS " &
3289 -- /ALL_BACK_END_WARNINGS
3291 -- Activate all warning messages of the GCC back-end.
3293 S_GCC_Wide : aliased constant S := "/WIDE_CHARACTER_ENCODING=" &
3306 -- /NOWIDE_CHARACTER_ENCODING (D)
3307 -- /WIDE_CHARACTER_ENCODING[=encode-type]
3309 -- Specifies the mechanism used to encode wide characters. 'encode-type'
3310 -- is one of the following:
3312 -- BRACKETS (D) A wide character is encoded as ["xxxx"] where XXXX
3313 -- are four hexadecimal digits representing the coding
3314 -- ('Pos value) of the character in type
3315 -- Wide_Character. The hexadecimal digits may use upper
3316 -- or lower case letters.
3318 -- This notation can also be used for upper half
3319 -- Character values using the format ["xx"] where XX is
3320 -- two hexadecimal digits representing the coding ('Pos
3321 -- value) of the character in type Character (or
3322 -- Wide_Character). The hexadecimal digits may use upper
3325 -- NONE No wide characters are allowed. Same
3326 -- as /NOWIDE_CHARCTER_ENCODING.
3328 -- HEX In this encoding, a wide character is represented by
3329 -- the following five character sequence: ESC a b c d
3330 -- Where 'a', 'b', 'c', and 'd' are the four hexadecimal
3331 -- characters (using uppercase letters) of the wide
3332 -- character code. For example, ESC A345 is used to
3333 -- represent the wide character with code 16#A345#. This
3334 -- scheme is compatible with use of the full
3335 -- Wide_Character set.
3337 -- UPPER The wide character with encoding 16#abcd# where the
3338 -- upper bit is on (in other words, "a" is in the range
3339 -- 8-F) is represented as two bytes, 16#ab# and 16#cd#.
3340 -- The second byte may never be a format control
3341 -- character, but is not required to be in the upper
3342 -- half. This method can be also used for shift-JIS or
3343 -- EUC, where the internal coding matches the external
3346 -- SHIFT_JIS A wide character is represented by a two-character
3347 -- sequence, 16#ab# and 16#cd#, with the restrictions
3348 -- described for upper-half encoding as described above.
3349 -- The internal character code is the corresponding JIS
3350 -- character according to the standard algorithm for
3351 -- Shift-JIS conversion. Only characters defined in the
3352 -- JIS code set table can be used with this encoding
3355 -- UTF8 A wide character is represented using
3356 -- UCS Transformation Format 8 (UTF-8) as defined in Annex
3357 -- R of ISO 10646-1/Am.2. Depending on the character
3358 -- value, the representation is a one, two, or three byte
3361 -- 16#0000#-16#007f#: 2#0xxxxxxx#
3362 -- 16#0080#-16#07ff#: 2#110xxxxx# 2#10xxxxxx#
3363 -- 16#0800#-16#ffff#: 2#1110xxxx# 2#10xxxxxx# 2#10xxxxxx#
3365 -- where the xxx bits correspond to the left-padded bits
3366 -- of the the 16-bit character value. Note that all lower
3367 -- half ASCII characters are represented as ASCII bytes
3368 -- and all upper half characters and other wide characters
3369 -- are represented as sequences of upper-half (The full
3370 -- UTF-8 scheme allows for encoding 31-bit characters as
3371 -- 6-byte sequences, but in this implementation, all UTF-8
3372 -- sequences of four or more bytes length will be treated
3375 -- EUC A wide character is represented by a two-character
3376 -- sequence 16#ab# and 16#cd#, with both characters being
3377 -- in the upper half. The internal character code is the
3378 -- corresponding JIS character according to the EUC
3379 -- encoding algorithm. Only characters defined in the JIS
3380 -- code set table can be used with this encoding method.
3382 S_GCC_WideX : aliased constant S := "/NOWIDE_CHARACTER_ENCODING " &
3384 -- NODOC (see /WIDE_CHARACTER_ENCODING)
3386 S_GCC_Xdebug : aliased constant S := "/XDEBUG " &
3391 -- Output expanded source files for source level debugging.
3392 -- The expanded source (see /EXPAND_SOURCE) is written to files
3393 -- with names formed by appending "_DG" to the input file name,
3394 -- The debugging information generated by the /DEBUG qualifier will then
3395 -- refer to the generated file. This allows source level debugging using
3396 -- the generated code which is sometimes useful for complex code, for
3397 -- example to find out exactly which part of a complex construction
3398 -- raised an exception.
3400 S_GCC_Xref : aliased constant S := "/XREF=" &
3407 -- Normally the compiler generates full cross-referencing information in
3408 -- the .ALI file. This information is used by a number of tools,
3409 -- including GNAT FIND and GNAT XREF.
3411 -- GENERATE (D) Generate cross-referencing information.
3413 -- SUPPRESS Suppress cross-referencing information.
3414 -- This saves some space and may slightly
3415 -- speed up compilation, but means that some
3416 -- tools cannot be used.
3418 GCC_Switches : aliased constant Switches :=
3419 (S_GCC_Ada_83 'Access,
3420 S_GCC_Ada_95 'Access,
3421 S_GCC_Ada_05 'Access,
3424 S_GCC_Checks 'Access,
3425 S_GCC_ChecksX 'Access,
3426 S_GCC_Compres 'Access,
3427 S_GCC_Config 'Access,
3428 S_GCC_Current 'Access,
3429 S_GCC_Debug 'Access,
3430 S_GCC_DebugX 'Access,
3433 S_GCC_DistX 'Access,
3434 S_GCC_Error 'Access,
3435 S_GCC_ErrorX 'Access,
3436 S_GCC_Expand 'Access,
3437 S_GCC_Extend 'Access,
3440 S_GCC_Follow 'Access,
3441 S_GCC_Force 'Access,
3445 S_GCC_Ident 'Access,
3446 S_GCC_IdentX 'Access,
3447 S_GCC_Ignore 'Access,
3448 S_GCC_Immed 'Access,
3449 S_GCC_Inline 'Access,
3450 S_GCC_InlineX 'Access,
3451 S_GCC_Intsrc 'Access,
3453 S_GCC_JustX 'Access,
3454 S_GCC_Length 'Access,
3456 S_GCC_Output 'Access,
3457 S_GCC_Mapping 'Access,
3459 S_GCC_Nesting 'Access,
3460 S_GCC_Noadc 'Access,
3461 S_GCC_Noload 'Access,
3462 S_GCC_Nostinc 'Access,
3463 S_GCC_Nostlib 'Access,
3466 S_GCC_Polling 'Access,
3467 S_GCC_Project 'Access,
3469 S_GCC_Report 'Access,
3470 S_GCC_ReportX 'Access,
3471 S_GCC_Repinfo 'Access,
3472 S_GCC_RepinfX 'Access,
3474 S_GCC_Search 'Access,
3475 S_GCC_Style 'Access,
3476 S_GCC_StyleX 'Access,
3477 S_GCC_Subdirs 'Access,
3478 S_GCC_Symbol 'Access,
3479 S_GCC_Syntax 'Access,
3480 S_GCC_Table 'Access,
3481 S_GCC_Trace 'Access,
3484 S_GCC_Units 'Access,
3485 S_GCC_Unique 'Access,
3486 S_GCC_Upcase 'Access,
3487 S_GCC_Valid 'Access,
3488 S_GCC_Verbose 'Access,
3489 S_GCC_Verb_Asm'Access,
3491 S_GCC_WarnX 'Access,
3493 S_GCC_WideX 'Access,
3494 S_GCC_No_Back 'Access,
3495 S_GCC_All_Back'Access,
3496 S_GCC_Xdebug 'Access,
3497 S_GCC_Xref 'Access);
3499 ----------------------------
3500 -- Switches for GNAT ELIM --
3501 ----------------------------
3503 S_Elim_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
3505 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
3507 -- Add directories to the project search path.
3509 S_Elim_All : aliased constant S := "/ALL " &
3514 -- Also look for subprograms from the GNAT run time that can be
3515 -- eliminated. Note that when 'gnat.adc' is produced using this switch,
3516 -- the entire program must be recompiled with qualifier /ALL_FILES of
3519 S_Elim_Bind : aliased constant S := "/BIND_FILE=<" &
3521 -- /BIND_FILE=file_name
3523 -- Specifies file_name as the bind file to process. If this qualifier is
3524 -- not used, the name of the bind file is computed from the full expanded
3525 -- Ada name of a main subprogram.
3527 S_Elim_Comp : aliased constant S := "/COMPILER=@" &
3529 -- /COMPILER=path_name
3531 -- Instructs GNAT ELIM to use a specific gcc compiler instead of one
3532 -- available on the path.
3534 S_Elim_Config : aliased constant S := "/CONFIGURATION_PRAGMAS=<" &
3536 -- /CONFIGURATION_PRAGMAS=path_name
3538 -- Specifies a file that contains configuration pragmas.
3539 -- The file must be specified with absolute path.
3541 S_Elim_Current : aliased constant S := "/CURRENT_DIRECTORY " &
3543 -- /CURRENT_DIRECTORY (D)
3544 -- /NOCURRENT_DIRECTORY
3546 -- Look for source files in the default directory.
3548 S_Elim_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' &
3550 -- /EXTERNAL_REFERENCE="name=val"
3552 -- Specifies an external reference to the project manager. Useful only if
3553 -- /PROJECT_FILE is used.
3556 -- /EXTERNAL_REFERENCE="DEBUG=TRUE"
3558 S_Elim_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
3560 -- /NOFOLLOW_LINKS_FOR_FILES (D)
3561 -- /FOLLOW_LINKS_FOR_FILES
3563 -- Follow links when parsing project files
3565 S_Elim_GNATMAKE : aliased constant S := "/GNATMAKE=@" &
3567 -- /GNATMAKE=path_name
3569 -- Instructs GNAT MAKE to use a specific gnatmake instead of one available
3572 S_Elim_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" &
3579 -- /MESSAGES_PROJECT_FILE[=messages-option]
3581 -- Specifies the "verbosity" of the parsing of project files.
3582 -- messages-option may be one of the following:
3584 -- DEFAULT (D) No messages are output if there is no error or warning.
3586 -- MEDIUM A small number of messages are output.
3588 -- HIGH A great number of messages are output, most of them not
3589 -- being useful for the user.
3591 S_Elim_Project : aliased constant S := "/PROJECT_FILE=<" &
3593 -- /PROJECT_FILE=filename
3595 -- Specifies the main project file to be used. The project files rooted
3596 -- at the main project file will be parsed before the invocation of the
3597 -- gnatelim. The source directories to be searched will be communicated
3598 -- to gnatelim through logical name ADA_PRJ_INCLUDE_FILE.
3600 S_Elim_Quiet : aliased constant S := "/QUIET " &
3605 -- Quiet mode: by default GNAT ELIM outputs to the standard error stream
3606 -- the number of program units left to be processed. This option turns
3609 S_Elim_Search : aliased constant S := "/SEARCH=*" &
3611 -- /SEARCH=(directory, ...)
3613 -- When looking for source files also look in the specified directories.
3615 S_Elim_Subdirs : aliased constant S := "/SUBDIRS=<" &
3619 -- The actual directories (object, exec, library, ...) are subdirectories
3620 -- of the directory specified in the project file. If the subdirectory
3621 -- does not exist, it is created automatically.
3623 S_Elim_Verb : aliased constant S := "/VERBOSE " &
3628 -- Verbose mode: GNAT ELIM version information is output as Ada comments
3629 -- to the standard output stream. Also, in addition to the number of
3630 -- program units left, GNAT ELIM will output the name of the current unit
3633 Elim_Switches : aliased constant Switches :=
3634 (S_Elim_Add 'Access,
3636 S_Elim_Bind 'Access,
3637 S_Elim_Comp 'Access,
3638 S_Elim_Config 'Access,
3639 S_Elim_Current 'Access,
3641 S_Elim_Follow 'Access,
3642 S_Elim_GNATMAKE'Access,
3643 S_Elim_Mess 'Access,
3644 S_Elim_Project 'Access,
3645 S_Elim_Quiet 'Access,
3646 S_Elim_Search 'Access,
3647 S_Elim_Subdirs 'Access,
3648 S_Elim_Verb 'Access);
3650 ----------------------------
3651 -- Switches for GNAT FIND --
3652 ----------------------------
3654 S_Find_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
3656 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
3658 -- Add directories to the project search path.
3660 S_Find_All : aliased constant S := "/ALL_FILES " &
3665 -- If this switch is present, FIND and XREF will parse the read-only
3666 -- files found in the library search path. Otherwise, these files will
3667 -- be ignored. This option can be used to protect Gnat sources or your
3668 -- own libraries from being parsed, thus making FIND and XREF much
3669 -- faster, and their output much smaller.
3671 S_Find_Deriv : aliased constant S := "/DERIVED_TYPE_INFORMATION " &
3673 -- /NODERIVED_TYPE_INFORMATION (D)
3674 -- /DERIVED_TYPE_INFORMATION
3676 -- Output the parent type reference for each matching derived types.
3678 S_Find_Expr : aliased constant S := "/EXPRESSIONS " &
3680 -- /NOEXPRESSIONS (D)
3683 -- By default, FIND accepts the simple regular expression set for pattern.
3684 -- If this switch is set, then the pattern will be considered as a full
3685 -- Unix-style regular expression.
3687 S_Find_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' &
3689 -- /EXTERNAL_REFERENCE="name=val"
3691 -- Specifies an external reference to the project manager. Useful only if
3692 -- /PROJECT_FILE is used.
3695 -- /EXTERNAL_REFERENCE="DEBUG=TRUE"
3697 S_Find_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
3699 -- /NOFOLLOW_LINKS_FOR_FILES (D)
3700 -- /FOLLOW_LINKS_FOR_FILES
3702 -- Follow links when parsing project files
3704 S_Find_Full : aliased constant S := "/FULL_PATHNAME " &
3706 -- /NOFULL_PATHNAME (D)
3709 -- If this switch is set, the output file names will be preceded by their
3710 -- directory (if the file was found in the search path). If this switch
3711 -- is not set, the directory will not be printed.
3713 S_Find_Ignore : aliased constant S := "/IGNORE_LOCALS " &
3715 -- /NOIGNORE_LOCALS (D)
3718 -- If this switch is set, information is output only for library-level
3719 -- entities, ignoring local entities. The use of this switch may
3720 -- accelerate FIND and XREF.
3722 S_Find_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" &
3729 -- /MESSAGES_PROJECT_FILE[=messages-option]
3731 -- Specifies the "verbosity" of the parsing of project files.
3732 -- messages-option may be one of the following:
3734 -- DEFAULT (D) No messages are output if there is no error or warning.
3736 -- MEDIUM A small number of messages are output.
3738 -- HIGH A great number of messages are output, most of them not
3739 -- being useful for the user.
3741 S_Find_Nostinc : aliased constant S := "/NOSTD_INCLUDES " &
3745 -- Do not look for sources in the system default directory.
3747 S_Find_Nostlib : aliased constant S := "/NOSTD_LIBRARIES " &
3751 -- Do not look for library files in the system default directory.
3753 S_Find_Object : aliased constant S := "/OBJECT_SEARCH=*" &
3755 -- /OBJECT_SEARCH=(directory,...)
3757 -- When searching for library and object files, look in the specified
3758 -- directories. The order in which library files are searched is the same
3761 S_Find_Print : aliased constant S := "/PRINT_LINES " &
3763 -- /NOPRINT_LINES (D)
3766 -- Output the content of the Ada source file lines were the entity was
3769 S_Find_Project : aliased constant S := "/PROJECT=@" &
3773 -- Specify a project file to use. By default, FIND and XREF will try to
3774 -- locate a project file in the current directory.
3776 -- If a project file is either specified or found by the tools, then the
3777 -- content of the source directory and object directory lines are added
3778 -- as if they had been specified respectively by /SOURCE_SEARCH and
3781 -- This qualifier is not compatible with /PROJECT_FILE
3783 S_Find_Prj : aliased constant S := "/PROJECT_FILE=<" &
3785 -- /PROJECT_FILE=filename
3787 -- Specifies the main project file to be used. The project files rooted
3788 -- at the main project file will be parsed before looking for sources.
3789 -- The source and object directories to be searched will be communicated
3790 -- to gnatfind through logical names ADA_PRJ_INCLUDE_FILE and
3791 -- ADA_PRJ_OBJECTS_FILE.
3793 S_Find_Ref : aliased constant S := "/REFERENCES " &
3795 -- /NOREFERENCES (D)
3798 -- By default, FIND will output only the information about the
3799 -- declaration, body or type completion of the entities. If this switch
3800 -- is set, the FIND will locate every reference to the entities in the
3801 -- files specified on the command line (or in every file in the search
3802 -- path if no file is given on the command line).
3804 S_Find_Search : aliased constant S := "/SEARCH=*" &
3806 -- /SEARCH=(directory,...)
3809 -- /OBJECT_SEARCH=(directory,...) /SOURCE_SEARCH=(directory,...)
3811 S_Find_Source : aliased constant S := "/SOURCE_SEARCH=*" &
3813 -- /SOURCE_SEARCH=(directory,...)
3815 -- When looking for source files also look in the specified directories.
3816 -- The order in which source file search is undertaken is the same as for
3819 S_Find_Subdirs : aliased constant S := "/SUBDIRS=<" &
3823 -- The actual directories (object, exec, library, ...) are subdirectories
3824 -- of the directory specified in the project file. If the subdirectory
3825 -- does not exist, it is created automatically.
3827 S_Find_Types : aliased constant S := "/TYPE_HIERARCHY " &
3829 -- /NOTYPE_HIERARCHY (D)
3832 -- Output the type hierarchy for the specified type. It acts like the
3833 -- /DERIVED_TYPE_INFORMATION qualifier, but recursively from parent type
3834 -- to parent type. When this qualifier is specified it is not possible to
3835 -- specify more than one file.
3837 Find_Switches : aliased constant Switches :=
3838 (S_Find_Add 'Access,
3840 S_Find_Deriv 'Access,
3841 S_Find_Expr 'Access,
3843 S_Find_Follow 'Access,
3844 S_Find_Full 'Access,
3845 S_Find_Ignore 'Access,
3846 S_Find_Mess 'Access,
3847 S_Find_Nostinc 'Access,
3848 S_Find_Nostlib 'Access,
3849 S_Find_Object 'Access,
3850 S_Find_Print 'Access,
3851 S_Find_Project 'Access,
3854 S_Find_Search 'Access,
3855 S_Find_Source 'Access,
3856 S_Find_Subdirs 'Access,
3857 S_Find_Types 'Access);
3859 ------------------------------
3860 -- Switches for GNAT KRUNCH --
3861 ------------------------------
3863 S_Krunch_Count : aliased constant S := "/COUNT=#" &
3868 -- Limit file names to nnn characters (where nnn is a decimal
3869 -- integer). The maximum file name length is 39, but if you want to
3870 -- generate a set of files that would be usable if ported to a system
3871 -- with some different maximum file length, then a different value can
3874 Krunch_Switches : aliased constant Switches :=
3875 (1 .. 1 => S_Krunch_Count 'Access);
3877 ----------------------------
3878 -- Switches for GNAT LINK --
3879 ----------------------------
3881 S_Link_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
3883 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
3885 -- Add directories to the project search path.
3887 S_Link_Bind : aliased constant S := "/BIND_FILE=" &
3892 -- /BIND_FILE=[bind-file-option]
3894 -- Specifies the language of the binder generated file.
3896 -- ADA (D) Binder file is Ada.
3898 -- C Binder file is 'C'.
3900 S_Link_Debug : aliased constant S := "/DEBUG=" &
3910 -- /DEBUG[=debug-option]
3912 -- Specifies the amount of debugging information included. 'debug-option'
3913 -- is one of the following:
3915 -- ALL (D) Include full debugging information.
3917 -- NONE Provide no debugging information. Same as /NODEBUG.
3919 -- TRACEBACK Provide sufficient debug information for a traceback.
3921 -- NOTRACEBACK Same as NONE.
3923 S_Link_Nodebug : aliased constant S := "/NODEBUG " &
3925 -- NODOC (see /DEBUG)
3927 S_Link_Execut : aliased constant S := "/EXECUTABLE=@" &
3929 -- /EXECUTABLE=exec-name
3931 -- 'exec-name' specifies an alternative name for the generated executable
3932 -- program. If this qualifier switch is omitted, the executable is called
3933 -- the name of the main unit. So "$ GNAT LINK TRY.ALI" creates an
3934 -- executable called TRY.EXE.
3936 S_Link_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' &
3938 -- /EXTERNAL_REFERENCE="name=val"
3940 -- Specifies an external reference to the project manager. Useful only if
3941 -- /PROJECT_FILE is used.
3944 -- /EXTERNAL_REFERENCE="DEBUG=TRUE"
3946 S_Link_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
3948 -- /NOFOLLOW_LINKS_FOR_FILES (D)
3949 -- /FOLLOW_LINKS_FOR_FILES
3951 -- Follow links when parsing project files
3953 S_Link_Forlink : aliased constant S := "/FOR_LINKER=" & '"' &
3954 "--for-linker=" & '"';
3955 -- /FOR_LINKER=<string>
3957 -- Transmit the option <string> to the underlying linker.
3959 S_Link_Force : aliased constant S := "/FORCE_OBJECT_FILE_LIST " &
3961 -- /NOFORCE_OBJECT_FILE_LIST (D)
3962 -- /FORCE_OBJECT_FILE_LIST
3964 -- Forces the generation of a file that contains commands for the linker.
3965 -- This is useful in some cases to deal with special situations where the
3966 -- command line length is exceeded.
3968 S_Link_Ident : aliased constant S := "/IDENTIFICATION=" & '"' &
3969 "--for-linker=IDENT=" &
3971 -- /IDENTIFICATION="<string>"
3973 -- "<string>" specifies the string to be stored in the image file ident-
3974 -- ification field in the image header. It overrides any pragma Ident
3975 -- specified string.
3977 S_Link_Libdir : aliased constant S := "/LIBDIR=*" &
3979 -- /LIBDIR=(directory, ...)
3981 -- Look for libraries in the specified directories.
3983 S_Link_Library : aliased constant S := "/LIBRARY=|" &
3987 -- Link with library named "xyz".
3989 S_Link_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" &
3996 -- /MESSAGES_PROJECT_FILE[=messages-option]
3998 -- Specifies the "verbosity" of the parsing of project files.
3999 -- messages-option may be one of the following:
4001 -- DEFAULT (D) No messages are output if there is no error or warning.
4003 -- MEDIUM A small number of messages are output.
4005 -- HIGH A great number of messages are output, most of them not
4006 -- being useful for the user.
4008 S_Link_Nocomp : aliased constant S := "/NOCOMPILE " &
4012 -- Do not compile the file generated by the binder.
4013 -- This may be used when a link is rerun with different options,
4014 -- but there is no need to recompile the binder generated file.
4016 S_Link_Noinhib : aliased constant S := "/NOINHIBIT-EXEC " &
4017 "--for-linker=--noinhibit-exec";
4020 -- Delete executable if there are errors or warnings.
4022 S_Link_Nofiles : aliased constant S := "/NOSTART_FILES " &
4026 -- Link in default image initialization and startup functions.
4028 S_Link_Project : aliased constant S := "/PROJECT_FILE=<" &
4030 -- /PROJECT_FILE=filename
4032 -- Specifies the main project file to be used. The project files rooted
4033 -- at the main project file will be parsed before the invocation of the
4035 -- The source and object directories to be searched will be communicated
4036 -- to the linker through logical names ADA_PRJ_INCLUDE_FILE and
4037 -- ADA_PRJ_OBJECTS_FILE.
4039 S_Link_Return : aliased constant S := "/RETURN_CODES=" &
4041 "!-mvms-return-codes " &
4043 "-mvms-return-codes";
4044 -- /RETURN_CODES=POSIX (D)
4045 -- /RETURN_CODES=VMS
4047 -- Specifies the style of codes returned by
4048 -- Ada.Command_Line.Set_Exit_Status. Must be used in conjunction with
4049 -- and match the Bind qualifer with the same name.
4051 -- POSIX (D) Return Posix compatible exit codes.
4053 -- VMS Return VMS compatible exit codes. The value returned
4054 -- is identically equal to the Set_Exit_Status parameter.
4056 S_Link_Static : aliased constant S := "/STATIC " &
4057 "--for-linker=-static";
4061 -- Indicate to the linker that the link is static.
4063 S_Link_Subdirs : aliased constant S := "/SUBDIRS=<" &
4067 -- The actual directories (object, exec, library, ...) are subdirectories
4068 -- of the directory specified in the project file. If the subdirectory
4069 -- does not exist, it is created automatically.
4071 S_Link_Verb : aliased constant S := "/VERBOSE " &
4076 -- Causes additional information to be output, including a full list of
4077 -- the included object files. This switch option is most useful when you
4078 -- want to see what set of object files are being used in the link step.
4080 S_Link_ZZZZZ : aliased constant S := "/<other> " &
4084 -- Any other switch that will be transmited to the underlying linker.
4086 Link_Switches : aliased constant Switches :=
4087 (S_Link_Add 'Access,
4088 S_Link_Bind 'Access,
4089 S_Link_Debug 'Access,
4090 S_Link_Nodebug 'Access,
4091 S_Link_Execut 'Access,
4093 S_Link_Follow 'Access,
4094 S_Link_Forlink 'Access,
4095 S_Link_Force 'Access,
4096 S_Link_Ident 'Access,
4097 S_Link_Libdir 'Access,
4098 S_Link_Library 'Access,
4099 S_Link_Mess 'Access,
4100 S_Link_Nocomp 'Access,
4101 S_Link_Nofiles 'Access,
4102 S_Link_Noinhib 'Access,
4103 S_Link_Project 'Access,
4104 S_Link_Return 'Access,
4105 S_Link_Static 'Access,
4106 S_Link_Subdirs 'Access,
4107 S_Link_Verb 'Access,
4108 S_Link_ZZZZZ 'Access);
4110 ----------------------------
4111 -- Switches for GNAT LIST --
4112 ----------------------------
4114 S_List_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
4116 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
4118 -- Add directories to the project search path.
4120 S_List_All : aliased constant S := "/ALL_UNITS " &
4125 -- Consider all units, including those of the predefined Ada library.
4126 -- Especially useful with /DEPENDENCIES.
4128 S_List_Allproj : aliased constant S := "/ALL_PROJECTS " &
4130 -- /NOALL_PROJECTS (D)
4133 -- When used with a project file and no file specified, indicate
4134 -- that gnatls should be called for all sources of all projects in
4135 -- the project tree.
4137 S_List_Current : aliased constant S := "/CURRENT_DIRECTORY " &
4139 -- /CURRENT_DIRECTORY (D)
4140 -- /NOCURRENT_DIRECTORY
4142 -- Look for source, library or object files in the default directory.
4144 S_List_Depend : aliased constant S := "/DEPENDENCIES " &
4146 -- /NODEPENDENCIES (D)
4149 S_List_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' &
4151 -- /EXTERNAL_REFERENCE="name=val"
4153 -- Specifies an external reference to the project manager. Useful only if
4154 -- /PROJECT_FILE is used.
4157 -- /EXTERNAL_REFERENCE="DEBUG=TRUE"
4159 S_List_Files : aliased constant S := "/FILES=@" &
4163 -- Take as arguments the files that are listed in the specified
4166 S_List_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
4168 -- /NOFOLLOW_LINKS_FOR_FILES (D)
4169 -- /FOLLOW_LINKS_FOR_FILES
4171 -- Follow links when parsing project files
4173 S_List_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" &
4180 -- /MESSAGES_PROJECT_FILE[=messages-option]
4182 -- Specifies the "verbosity" of the parsing of project files.
4183 -- messages-option may be one of the following:
4185 -- DEFAULT (D) No messages are output if there is no error or warning.
4187 -- MEDIUM A small number of messages are output.
4189 -- HIGH A great number of messages are output, most of them not
4190 -- being useful for the user.
4192 S_List_Nostinc : aliased constant S := "/NOSTD_INCLUDES " &
4196 -- Do not look for sources of the run time in the standard directory.
4198 S_List_Object : aliased constant S := "/OBJECT_SEARCH=*" &
4200 -- /OBJECT_SEARCH=(directory,...)
4202 -- When looking for library and object files look also in the specified
4205 S_List_Output : aliased constant S := "/OUTPUT=" &
4218 -- /OUTPUT=(option,option,...)
4220 -- SOURCES (D) Only output information about source files.
4222 -- DEPEND List sources from which specified units depend on.
4224 -- OBJECTS Only output information about object files.
4226 -- UNITS Only output information about compilation units.
4228 -- OPTIONS Output the list of options.
4230 -- VERBOSE Output the complete source and object paths.
4231 -- Do not use the default column layout but instead
4232 -- use long format giving as much as information
4233 -- possible on each requested units, including
4234 -- special characteristics.
4236 S_List_Project : aliased constant S := "/PROJECT_FILE=<" &
4238 -- /PROJECT_FILE=filename
4240 -- Specifies the main project file to be used. The project files rooted
4241 -- at the main project file will be parsed before doing any listing.
4242 -- The source and object directories to be searched will be communicated
4243 -- to gnatlist through logical names ADA_PRJ_INCLUDE_FILE and
4244 -- ADA_PRJ_OBJECTS_FILE.
4246 S_List_Search : aliased constant S := "/SEARCH=*" &
4248 -- /SEARCH=(directory,...)
4250 -- Search the specified directories for both source and object files.
4252 S_List_Source : aliased constant S := "/SOURCE_SEARCH=*" &
4254 -- /SOURCE_SEARCH=(directory,...)
4256 -- When looking for source files also look in the specified directories.
4258 S_List_Subdirs : aliased constant S := "/SUBDIRS=<" &
4262 -- The actual directories (object, exec, library, ...) are subdirectories
4263 -- of the directory specified in the project file. If the subdirectory
4264 -- does not exist, it is created automatically.
4266 List_Switches : aliased constant Switches :=
4267 (S_List_Add 'Access,
4269 S_List_Allproj 'Access,
4270 S_List_Current 'Access,
4271 S_List_Depend 'Access,
4273 S_List_Files 'Access,
4274 S_List_Follow 'Access,
4275 S_List_Mess 'Access,
4276 S_List_Nostinc 'Access,
4277 S_List_Object 'Access,
4278 S_List_Output 'Access,
4279 S_List_Project 'Access,
4280 S_List_Search 'Access,
4281 S_List_Source 'Access,
4282 S_List_Subdirs 'Access);
4284 ----------------------------
4285 -- Switches for GNAT MAKE --
4286 ----------------------------
4288 S_Make_Actions : aliased constant S := "/ACTIONS=" &
4295 -- /ACTIONS=(keyword[,...])
4297 -- GNAT MAKE default behavior is to check if the sources are up to date,
4298 -- compile those sources that are not up to date, bind the main source,
4299 -- then link the executable.
4301 -- With the /ACTIONS qualifier, GNAT MAKE may be restricted to one or
4302 -- two of these three steps:
4309 -- You may specify one or more of the following keywords to the /ACTIONS
4312 -- BIND Bind only. Can be combined with /ACTIONS=COMPILE
4313 -- to do compilation and binding, but no linking.
4314 -- Can be combined with /ACTIONS=LINK to do binding and
4315 -- linking. When not combined with /ACTIONS=COMPILE,
4316 -- all the units in the closure of the main program must
4317 -- have been previously compiled and must be up to date.
4319 -- COMPILE Compile only. Do not perform binding, except when
4320 -- /ACTIONS=BIND is also specified. Do not perform
4321 -- linking, except if both /ACTIONS=BIND and /ACTIONS=LINK
4322 -- are also specified.
4324 -- LINK Link only. Can be combined with /ACTIONS=BIND to do
4325 -- binding and linking. Linking will not be performed
4326 -- if combined with /ACTIONS=COMPILE but not with
4327 -- /ACTIONS=BIND\. When not combined with /ACTIONS=BIND
4328 -- all the units in the closure of the main program must
4329 -- have been previously compiled and must be up to date,
4330 -- and the main program need to have been bound.
4332 S_Make_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
4334 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
4336 -- Add directories to the project search path.
4338 S_Make_All : aliased constant S := "/ALL_FILES " &
4343 -- Consider all files in the make process, even the GNAT internal system
4344 -- files (for example, the predefined Ada library files). By default,
4345 -- GNAT MAKE does not check these files (however, if there is an
4346 -- installation problem, it will be caught when GNAT MAKE binds your
4347 -- program). You may have to specify this qualifier if you are working on
4348 -- GNAT itself. The vast majority of GNAT MAKE users never need to
4349 -- specify this switch. All GNAT internal files with will be compiled
4350 -- with /STYLE_CHECK=GNAT.
4352 S_Make_Allproj : aliased constant S := "/ALL_PROJECTS " &
4354 -- /NOALL_PROJECTS (D)
4358 -- When used without project files, it is equivalent to /UNIQUE.
4359 -- When used with a project file with no main (neither on the command
4360 -- line nor in the attribute Main) check every source of every project,
4361 -- recompile all sources that are not up to date and rebuild libraries
4364 S_Make_Bind : aliased constant S := "/BINDER_QUALIFIERS=?" &
4366 -- /BINDER_QUALIFIERS
4368 -- Any qualifiers specified after this qualifier other than
4369 -- /COMPILER_QUALIFIERS, /LINKER_QUALIFIERS and /MAKE_QUALIFIERS will be
4370 -- passed to any GNAT BIND commands generated by GNAT MAKE.
4372 S_Make_Bindprj : aliased constant S := "/BND_LNK_FULL_PROJECT " &
4374 -- /BND_LNK_FULL_PROJECT
4376 -- Bind and link all sources of a project, without any consideration
4377 -- to attribute Main, if there is one. This qualifier need to be
4378 -- used in conjunction with the /PROJECT_FILE= qualifier and cannot
4379 -- be used with a main subprogram on the command line or for
4380 -- a library project file. As the binder is invoked with the option
4381 -- meaning "No Ada main subprogram", the user must ensure that the
4382 -- proper options are specified to the linker. This qualifier is
4383 -- normally used when the main subprogram is in a foreign language
4386 S_Make_Comp : aliased constant S := "/COMPILER_QUALIFIERS=?" &
4388 -- /COMPILER_QUALIFIERS
4390 -- Any qualifiers specified after this qualifier other than
4391 -- /BINDER_QUALIFIERS, /LINKER_QUALIFIERS and /MAKE_QUALIFIERS will be
4392 -- passed to any GNAT COMPILE commands generated by GNAT MAKE.
4394 S_Make_Cond : aliased constant S := "/CONDITIONAL_SOURCE_SEARCH=*" &
4396 -- /CONDITIONAL_SOURCE_SEARCH=dir
4398 -- Equivalent to "/SOURCE_SEARCH=dir /SKIP_MISSING=dir".
4400 S_Make_Cont : aliased constant S := "/CONTINUE_ON_ERROR " &
4402 -- /NOCONTINUE_ON_ERROR (D)
4403 -- /CONTINUE_ON_ERROR
4405 -- Keep going. Continue as much as possible after a compilation error.
4406 -- To ease the programmer's task in case of compilation errors, the list
4407 -- of sources for which the compile fails is given when GNAT MAKE
4410 S_Make_Current : aliased constant S := "/CURRENT_DIRECTORY " &
4412 -- /CURRENT_DIRECTORY (D)
4413 -- /NOCURRENT_DIRECTORY
4415 -- Look for source, library or object files in the default directory.
4417 S_Make_Dep : aliased constant S := "/DEPENDENCIES_LIST " &
4419 -- /NODEPENDENCIES_LIST (D)
4420 -- /DEPENDENCIES_LIST
4422 -- Check if all objects are up to date. If they are, output the object
4423 -- dependences to SYS$OUTPUT in a form that can be directly exploited in
4424 -- a Unix-style Makefile. By default, each source file is prefixed with
4425 -- its (relative or absolute) directory name. This name is whatever you
4426 -- specified in the various /SOURCE_SEARCH and /SEARCH qualifiers. If
4427 -- you also speficy the /QUIET qualifier, only the source file names,
4428 -- without relative paths, are output. If you just specify the
4429 -- /DEPENDENCY_LIST qualifier, dependencies of the GNAT internal system
4430 -- files are omitted. This is typically what you want. If you also
4431 -- specify the /ALL_FILES qualifier, dependencies of the GNAT internal
4432 -- files are also listed. Note that dependencies of the objects in
4433 -- external Ada libraries (see the /SKIP_MISSING qualifier) are never
4436 S_Make_Dirobj : aliased constant S := "/DIRECTORY_OBJECTS=@" &
4438 -- /DIRECTORY_OBJECTS=<file>
4440 -- Put all object files and .ALI files in <file>.
4441 -- This qualifier is not compatible with /PROJECT_FILE.
4443 S_Make_Doobj : aliased constant S := "/DO_OBJECT_CHECK " &
4445 -- /NODO_OBJECT_CHECK (D)
4448 -- Don't compile, bind, or link. Output a single command that will
4449 -- recompile an out of date unit, if any. Repeated use of this option,
4450 -- followed by carrying out the indicated compilation, will eventually
4451 -- result in recompiling all required units.
4453 -- If any ALI is missing during the process, GNAT MAKE halts and
4454 -- displays an error message.
4456 S_Make_Execut : aliased constant S := "/EXECUTABLE=@" &
4458 -- /EXECUTABLE=exec-name
4460 -- The name of the final executable program will be 'exec_name'. If this
4461 -- qualifier is omitted the default name for the executable will be the
4462 -- name of the input file with an EXE filetype. You may prefix
4463 -- 'exec_name' with a relative or absolute directory path.
4465 S_Make_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' &
4467 -- /EXTERNAL_REFERENCE="name=val"
4469 -- Specifies an external reference to the project manager. Useful only if
4470 -- /PROJECT_FILE is used.
4473 -- /EXTERNAL_REFERENCE="DEBUG=TRUE"
4475 S_Make_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
4477 -- /NOFOLLOW_LINKS_FOR_FILES (D)
4478 -- /FOLLOW_LINKS_FOR_FILES
4480 -- Follow links when parsing project files
4482 S_Make_Force : aliased constant S := "/FORCE_COMPILE " &
4484 -- /NOFORCE_COMPILE (D)
4487 -- Force recompilations. Recompile all sources, even though some object
4488 -- files may be up to date, but don't recompile predefined or GNAT
4489 -- internal files unless the /ALL_FILES qualfier is also specified.
4491 S_Make_Full : aliased constant S := "/FULL_PATH_IN_BRIEF_MESSAGES " &
4493 -- /NOFULL_PATH_IN_BRIEF_MESSAGES (D)
4494 -- /FULL_PATH_IN_BRIEF_MESSAGES
4496 -- When using project files, if some errors or warnings are detected
4497 -- during parsing and verbose mode is not in effect (no use of qualifier
4498 -- /VERBOSE), then error lines start with the full path name of the
4499 -- project file, rather than its simple file name.
4501 S_Make_Hi_Verb : aliased constant S := "/HIGH_VERBOSITY " &
4503 -- /NOHIGH_VERBOSITY (D)
4506 -- Displays the reason for all recompilations GNAT MAKE decides are
4507 -- necessary, in high verbosity. Equivalent to /VERBOSE.
4509 S_Make_Inplace : aliased constant S := "/IN_PLACE " &
4514 -- In normal mode, GNAT MAKE compiles all object files and ALI files
4515 -- into the current directory. If the /IN_PLACE switch is used,
4516 -- then instead object files and ALI files that already exist are over-
4517 -- written in place. This means that once a large project is organized
4518 -- into separate directories in the desired manner, then GNAT MAKE will
4519 -- automatically maintain and update this organization. If no ALI files
4520 -- are found on the Ada object path, the new object and ALI files are
4521 -- created in the directory containing the source being compiled.
4523 S_Make_Index : aliased constant S := "/SOURCE_INDEX=#" &
4525 -- /SOURCE_INDEX=nnn
4527 -- Specifies the index of the units in the source file
4528 -- By default, source files are mono-unit and there is no index
4529 -- When /SOURCE_INDEX=nnn is specified, only one main may be specified
4530 -- on the command line.
4532 S_Make_Library : aliased constant S := "/LIBRARY_SEARCH=*" &
4534 -- /LIBRARY_SEARCH=(directory[,...])
4536 -- Add the specified directories to the list of directories in which the
4537 -- linker will search for libraries.
4539 S_Make_Link : aliased constant S := "/LINKER_QUALIFIERS=?" &
4541 -- /LINKER_QUALIFIERS
4543 -- Any qualifiers specified after this qualifier other than
4544 -- /COMPILER_QUALIFIERS, /BINDER_QUALIFIERS and /MAKE_QUALIFIERS will be
4545 -- passed to any GNAT LINK commands generated by GNAT LINK.
4547 S_Make_Low_Verb : aliased constant S := "/LOW_VERBOSITY " &
4549 -- /NOLOW_VERBOSITY (D)
4552 -- Displays the reason for all recompilations GNAT MAKE decides are
4553 -- necessary, in low verbosity, that is with less output than
4554 -- /MEDIUM_VERBOSITY, /HIGH_VERBOSITY or /VERBOSE.
4556 S_Make_Make : aliased constant S := "/MAKE_QUALIFIERS=?" &
4560 -- Any qualifiers specified after this qualifier other than
4561 -- /COMPILER_QUALIFIERS, /BINDER_QUALIFIERS and /LINKER_QUALIFIERS
4562 -- are for the benefit of GNAT MAKE itself.
4564 S_Make_Mapping : aliased constant S := "/MAPPING " &
4569 -- Use a mapping file. A mapping file is a way to communicate to the
4570 -- compiler two mappings: from unit names to file names (without any
4571 -- directory information) and from file names to path names (with full
4572 -- directory information). These mappings are used by the compiler to
4573 -- short-circuit the path search. When GNAT MAKE is invoked with this
4574 -- qualifier, it will create a mapping file, initially populated by the
4575 -- project manager, if /PROJECT_File= is used, otherwise initially empty.
4576 -- Each invocation of the compiler will add the newly accessed sources to
4577 -- the mapping file. This will improve the source search during the next
4578 -- invocations of the compiler
4580 S_Make_Med_Verb : aliased constant S := "/MEDIUM_VERBOSITY " &
4582 -- /NOMEDIUM_VERBOSITY (D)
4583 -- /MEDIUM_VERBOSITY
4585 -- Displays the reason for all recompilations GNAT MAKE decides are
4586 -- necessary, in medium verbosity, that is with potentially less output
4587 -- than /HIGH_VERBOSITY or /VERBOSE.
4589 S_Make_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" &
4596 -- /MESSAGES_PROJECT_FILE[=messages-option]
4598 -- Specifies the "verbosity" of the parsing of project files.
4599 -- messages-option may be one of the following:
4601 -- DEFAULT (D) No messages are output if there is no error or warning.
4603 -- MEDIUM A small number of messages are output.
4605 -- HIGH A great number of messages are output, most of them not
4606 -- being useful for the user.
4608 S_Make_Minimal : aliased constant S := "/MINIMAL_RECOMPILATION " &
4610 -- /NOMINIMAL_RECOMPILATION (D)
4611 -- /MINIMAL_RECOMPILATION
4613 -- Specifies that the minimum necessary amount of recompilation
4614 -- be performed. In this mode GNAT MAKE ignores time stamp differences
4615 -- when the only modifications to a source file consist in
4616 -- adding/removing comments, empty lines, spaces or tabs.
4618 S_Make_Missing : aliased constant S := "/CREATE_MISSING_DIRS " &
4620 -- /NOCREATE_MISSING_DIRS (D)
4621 -- /CREATE_MISSING_DIRS
4623 -- When an object directory, a library directory or an exec directory
4624 -- in missing, attempt to create the directory.
4626 S_Make_Nolink : aliased constant S := "/NOLINK " &
4630 -- Compile only. Do not perform binding and linking. If the root unit is
4631 -- not a main unit, this is the default. Otherwise GNAT MAKE will
4632 -- attempt binding and linking unless all objects are up to date and the
4633 -- executable is more recent than the objects.
4634 -- This is equivalent to /ACTIONS=COMPILE
4636 S_Make_Nomain : aliased constant S := "/NOMAIN " &
4640 -- No main subprogram. Bind and link the program even if the unit name
4641 -- given on the command line is a package name. The resulting executable
4642 -- will execute the elaboration routines of the package and its closure,
4643 -- then the finalization routines.
4645 S_Make_Nonpro : aliased constant S := "/NON_PROJECT_UNIT_COMPILATION " &
4647 -- /NON_PROJECT_UNIT_COMPILATION
4649 -- Normally, when using project files, a unit that is not part of any
4650 -- project file, cannot be compile. These units may be compile, when
4651 -- needed, if this qualifier is specified.
4653 S_Make_Nostinc : aliased constant S := "/NOSTD_INCLUDES " &
4657 -- Do not look for sources the in the system default directory.
4659 S_Make_Nostlib : aliased constant S := "/NOSTD_LIBRARIES " &
4663 -- Do not look for library files in the system default directory.
4665 S_Make_Object : aliased constant S := "/OBJECT_SEARCH=*" &
4667 -- /OBJECT_SEARCH=(directory[,...])
4669 -- When looking for library and object files look also in the specified
4672 S_Make_Proc : aliased constant S := "/PROCESSES=#" &
4677 -- Use NNN processes to carry out the (re)complations. If you have a
4678 -- multiprocessor machine, compilations will occur in parallel. In the
4679 -- event of compilation errors, messages from various compilations might
4680 -- get interspersed (but GNAT MAKE will give you the full ordered list of
4681 -- failing compiles at the end). This can at times be annoying. To get a
4682 -- clean list of error messages don't use this qualifier.
4684 S_Make_Nojobs : aliased constant S := "/NOPROCESSES " &
4686 -- NODOC (see /PROCESS)
4688 S_Make_Project : aliased constant S := "/PROJECT_FILE=<" &
4690 -- /PROJECT_FILE=filename
4692 -- Specifies the main project file to be used. The project files rooted
4693 -- at the main project file will be parsed before any other processing to
4694 -- set the building environment.
4696 S_Make_Quiet : aliased constant S := "/QUIET " &
4701 -- When this qualifiers is specified, the commands carried out by GNAT
4702 -- MAKE are not displayed.
4704 S_Make_Reason : aliased constant S := "/REASONS " &
4709 -- Displays the reason for all recompilations GNAT MAKE decides are
4712 S_Make_RTS : aliased constant S := "/RUNTIME_SYSTEM=|" &
4714 -- /RUNTIME_SYSTEM=xxx
4716 -- Build against an alternate runtime system named xxx or RTS-xxx.
4718 S_Make_Search : aliased constant S := "/SEARCH=*" &
4720 -- /SEARCH=(directory[,...])
4722 -- Search the specified directories for both source and object files.
4724 S_Make_Skip : aliased constant S := "/SKIP_MISSING=*" &
4726 -- /SKIP_MISSING=(directory[,...])
4728 -- Skip missing library sources if ALI in 'directory'.
4730 S_Make_Source : aliased constant S := "/SOURCE_SEARCH=*" &
4732 -- /SOURCE_SEARCH=(directory[,...])
4734 -- When looking for source files also look in the specified directories.
4736 S_Make_Stand : aliased constant S := "/STANDARD_OUTPUT_FOR_COMMANDS " &
4738 -- /NOSTANDARD_OUTPUT_FOR_COMMANDS (D)
4739 -- /STANDARD_OUTPUT_FOR_COMMANDS
4741 -- Output the commands for the compiler, the binder and the linker
4742 -- on SYS$OUTPUT, instead of SYS$ERROR.
4744 S_Make_Subdirs : aliased constant S := "/SUBDIRS=<" &
4748 -- The actual directories (object, exec, library, ...) are subdirectories
4749 -- of the directory specified in the project file. If the subdirectory
4750 -- does not exist, it is created automatically.
4752 S_Make_Switch : aliased constant S := "/SWITCH_CHECK " &
4754 -- /NOSWITCH_CHECK (D)
4757 -- Recompile if compiler switches have changed since last compilation.
4758 -- All compiler switches but -I and -o are taken into account in the
4759 -- following way: orders between different "first letter" switches are
4760 -- ignored, but orders between same switches are taken into account.
4761 -- For example, -O -O2 is different than -O2 -O, but -g -O is equivalent
4764 S_Make_Unique : aliased constant S := "/UNIQUE " &
4769 -- Recompile at most the main file. It implies /ACTIONS=COMPILE.
4770 -- Combined with /FORCE_COMPILE, it is equivalent to calling the compiler
4773 S_Make_Use_Map : aliased constant S := "/USE_MAPPING_File=@" &
4775 -- /USE_MAPPING_FILE=file_name
4777 -- Use a specific mapping file. The file 'file_name', specified as a path
4778 -- name (absolute or relative) by this qualifier, should already exist,
4779 -- otherwise the qualifier is ineffective. The specified mapping file
4780 -- will be communicated to the compiler. This switch is not compatible
4781 -- with a project file (/PROJECT_FILE=) or with multiple compiling
4782 -- processes (/PROCESSES=nnn, when nnn is greater than 1).
4784 S_Make_Verbose : aliased constant S := "/VERBOSE " &
4789 -- Displays the reason for all recompilations GNAT MAKE decides are
4792 Make_Switches : aliased constant Switches :=
4793 (S_Make_Add 'Access,
4794 S_Make_Actions 'Access,
4796 S_Make_Allproj 'Access,
4797 S_Make_Bind 'Access,
4798 S_Make_Comp 'Access,
4799 S_Make_Cond 'Access,
4800 S_Make_Cont 'Access,
4801 S_Make_Current 'Access,
4803 S_Make_Dirobj 'Access,
4804 S_Make_Doobj 'Access,
4805 S_Make_Execut 'Access,
4807 S_Make_Follow 'Access,
4808 S_Make_Force 'Access,
4809 S_Make_Full 'Access,
4810 S_Make_Hi_Verb 'Access,
4811 S_Make_Inplace 'Access,
4812 S_Make_Index 'Access,
4813 S_Make_Library 'Access,
4814 S_Make_Link 'Access,
4815 S_Make_Low_Verb'Access,
4816 S_Make_Make 'Access,
4817 S_Make_Mapping 'Access,
4818 S_Make_Med_Verb'Access,
4819 S_Make_Mess 'Access,
4820 S_Make_Minimal 'Access,
4821 S_Make_Missing 'Access,
4822 S_Make_Nolink 'Access,
4823 S_Make_Nomain 'Access,
4824 S_Make_Nonpro 'Access,
4825 S_Make_Nostinc 'Access,
4826 S_Make_Nostlib 'Access,
4827 S_Make_Object 'Access,
4828 S_Make_Proc 'Access,
4829 S_Make_Nojobs 'Access,
4830 S_Make_Project 'Access,
4831 S_Make_Quiet 'Access,
4832 S_Make_Reason 'Access,
4834 S_Make_Search 'Access,
4835 S_Make_Skip 'Access,
4836 S_Make_Source 'Access,
4837 S_Make_Stand 'Access,
4838 S_Make_Subdirs 'Access,
4839 S_Make_Switch 'Access,
4840 S_Make_Unique 'Access,
4841 S_Make_Use_Map 'Access,
4842 S_Make_Verbose 'Access);
4844 ------------------------------
4845 -- Switches for GNAT METRIC --
4846 ------------------------------
4848 S_Metric_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
4850 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
4852 -- Add directories to the project search path.
4854 S_Metric_All_Prjs : aliased constant S := "/ALL_PROJECTS " &
4856 -- /NOALL_PROJECTS (D)
4858 -- When GNAT METRIC is used with a Project File and no source is
4859 -- specified, the underlying tool gnatmetric is called for all the
4860 -- sources of all the Project Files in the project tree.
4862 S_Metric_Debug : aliased constant S := "/DEBUG_OUTPUT " &
4866 -- Generate the debug information
4868 S_Metric_Direct : aliased constant S := "/DIRECTORY=@" &
4870 -- /DIRECTORY=pathname
4872 -- Put the files with detailed metric information into the specified
4875 S_Metric_Element : aliased constant S := "/ELEMENT_METRICS=" &
4877 "!-ed,!-es,!-enl,!-eps," &
4878 "!-eas,!-ept,!-eat,!-enu," &
4880 "DECLARATION_TOTAL " &
4882 "STATEMENT_TOTAL " &
4884 "LOOP_NESTING_MAX " &
4886 "INT_SUBPROGRAMS " &
4888 "SUBPROGRAMS_ALL " &
4894 "PROGRAM_NESTING_MAX " &
4896 "CONSTRUCT_NESTING_MAX " &
4898 -- NODOC (see /SYNTAX_METRICS)
4900 S_Metric_Syntax : aliased constant S := "/SYNTAX_METRICS=" &
4904 "--no-syntax-all " &
4905 "DECLARATIONS_ON " &
4907 "DECLARATIONS_OFF " &
4908 "--no-declarations " &
4912 "--no-statements " &
4913 "PUBLIC_SUBPROGRAMS_ON " &
4914 "--public-subprograms " &
4915 "PUBLIC_SUBPROGRAMS_OFF " &
4916 "--no-public-subprograms " &
4917 "ALL_SUBPROGRAMS_ON " &
4918 "--all-subprograms " &
4919 "ALL_SUBPROGRAMS_OFF " &
4920 "--no-all-subprograms " &
4921 "PUBLIC_TYPES_ON " &
4923 "PUBLIC_TYPES_OFF " &
4924 "--no-public-types " &
4929 "UNIT_NESTING_ON " &
4931 "UNIT_NESTING_OFF " &
4932 "--no-unit-nesting " &
4933 "CONSTRUCT_NESTING_ON " &
4934 "--construct-nesting " &
4935 "CONSTRUCT_NESTING_OFF " &
4936 "--no-construct-nesting";
4937 -- /SYNTAX_METRICS(option, option ...)
4939 -- Specifies the syntax element metrics to be computed (if at least one
4940 -- positive syntax element metric, line metric, complexity or coupling
4941 -- metric is specified then only explicitly specified specified syntax
4942 -- element metrics are computed and reported)
4944 -- option may be one of the following:
4946 -- ALL_ON (D) All the syntax element metrics are computed
4947 -- ALL_OFF None of syntax element metrics is computed
4948 -- DECLARATIONS_ON Compute the total number of declarations
4949 -- DECLARATIONS_OFF Do not compute the total number of
4951 -- STATEMENTS_ON Compute the total number of statements
4952 -- STATEMENTS_OFF Do not compute the total number of
4954 -- PUBLIC_SUBPROGRAMS_ON Compute the number of public subprograms
4955 -- PUBLIC_SUBPROGRAMS_OFF Do not compute the number of public
4957 -- ALL_SUBPROGRAMS_ON Compute the number of all the subprograms
4958 -- ALL_SUBPROGRAMS_OFF Do not compute the number of all the
4960 -- PUBLIC_TYPES_ON Compute the number of public types
4961 -- PUBLIC_TYPES_OFF Do not compute the number of public types
4962 -- ALL_TYPES_ON Compute the number of all the types
4963 -- ALL_TYPES_OFF Do not compute the number of all the types
4964 -- UNIT_NESTING_ON Compute the maximal program unit nesting
4966 -- UNIT_NESTING_OFF Do not compute the maximal program unit
4968 -- CONSTRUCT_NESTING_ON Compute the maximal construct nesting level
4969 -- CONSTRUCT_NESTING_OFF Do not compute the maximal construct nesting
4972 -- All combinations of syntax element metrics options are allowed.
4974 S_Metric_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' &
4976 -- /EXTERNAL_REFERENCE="name=val"
4978 -- Specifies an external reference to the project manager. Useful only if
4979 -- /PROJECT_FILE is used.
4982 -- /EXTERNAL_REFERENCE="DEBUG=TRUE"
4984 S_Metric_Files : aliased constant S := "/FILES=@" &
4988 -- Take as arguments the files that are listed in the specified
4991 S_Metric_Format : aliased constant S := "/FORMAT_OUTPUT=" &
4998 "SHORT_SOURCE_FILE_NAME " &
5000 -- /FORMAT_OUTPUT=(option, option ...)
5002 -- Specifies the details of the tool output
5004 -- option may be one of the following:
5006 -- DEFAULT (D) Generate the text output only, use full
5007 -- argument source names in global information
5008 -- XML Generate the output in XML format
5009 -- NO_TEXT Do not generate the text output (implies XML)
5010 -- SHORT_SOURCE_FILE_NAME Use short argument source names in output
5012 S_Metric_Globout : aliased constant S := "/GLOBAL_OUTPUT=@" &
5014 -- /GLOBAL_OUTPUT=filename
5016 -- Put the textual global metric information into the specified file
5018 S_Metric_Line : aliased constant S := "/LINE_METRICS=" &
5020 "!-la,!-lcode,!-lcomm," &
5028 "MIXED_CODE_COMMENTS " &
5030 "COMMENT_PERCENTAGE " &
5034 "AVERAGE_LINES_IN_BODIES " &
5036 -- NODOC (see /LINE_COUNT_METRICS)
5038 S_Metric_Lines : aliased constant S := "/LINE_COUNT_METRICS=" &
5050 "--no-lines-code " &
5051 "COMMENT_LINES_ON " &
5052 "--lines-comment " &
5053 "COMMENT_LINES_OFF " &
5054 "--no-lines-comment " &
5055 "CODE_COMMENT_LINES_ON " &
5056 "--lines-eol-comment " &
5057 "CODE_COMMENT_LINES_OFF " &
5058 "--no-lines-eol-comment " &
5059 "COMMENT_PERCENTAGE_ON " &
5061 "COMMENT_PERCENTAGE_OFF " &
5062 "--no-lines-ratio " &
5065 "BLANK_LINES_OFF " &
5066 "--no-lines-blank " &
5067 "AVERAGE_BODY_LINES_ON " &
5068 "--lines-average " &
5069 "AVERAGE_BODY_LINES_OFF " &
5070 "--no-lines-average";
5071 -- /LINE_COUNT_METRICS=(option, option ...)
5073 -- Specifies the line metrics to be computed (if at least one positive
5074 -- syntax element metric, line metric, complexity or coupling metric is
5075 -- specified then only explicitly specified specified line metrics are
5076 -- computed and reported)
5078 -- option may be one of the following:
5080 -- ALL_ON (D) All the line metrics are computed
5081 -- ALL_OFF None of line metrics is computed
5082 -- ALL_LINES_ON All lines are computed
5083 -- ALL_LINES_OFF All lines are not computed
5084 -- CODE_LINES_ON Lines with Ada code are computed
5085 -- CODE_LINES_OFF Lines with Ada code are not computed
5086 -- COMMENT_LINES_ON Comment lines are computed
5087 -- COMMENT_LINES_OFF Comment lines are not computed
5088 -- COMMENT_PERCENTAGE_ON Ratio between comment lines and all the
5089 -- lines containing comments and program code
5091 -- COMMENT_PERCENTAGE_OFF Ratio between comment lines and all the
5092 -- lines containing comments and program code
5094 -- BLANK_LINES_ON Blank lines are computed
5095 -- BLANK_LINES_OFF Blank lines are not computed
5096 -- AVERAGE_BODY_LINES_ON Average number of code lines in subprogram,
5097 -- task and entry bodies and statement
5098 -- sequences of package bodies is computed
5099 -- AVERAGE_BODY_LINES_OFF Average number of code lines in subprogram,
5100 -- task and entry bodies and statement
5101 -- sequences of package bodies is not computed
5103 -- All combinations of line metrics options are allowed.
5105 S_Metric_Complexity : aliased constant S := "/COMPLEXITY_METRICS=" &
5107 "--complexity-all " &
5109 "--no-complexity-all " &
5111 "--complexity-cyclomatic " &
5113 "--no-complexity-cyclomatic "&
5115 "--complexity-essential " &
5117 "--no-complexity-essential " &
5118 "LOOP_NESTING_ON " &
5120 "LOOP_NESTING_OFF " &
5121 "--no-loop-nesting " &
5122 "AVERAGE_COMPLEXITY_ON " &
5123 "--complexity-average " &
5124 "AVERAGE_COMPLEXITY_OFF " &
5125 "--no-complexity-average";
5126 -- /COMPLEXITY_METRICS=(option, option ...)
5128 -- Specifies the complexity metrics to be computed (if at least one
5129 -- positive syntax element metric, line metric, complexity or coupling
5130 -- metric is specified then only explicitly specified specified complexity
5131 -- metrics are computed and reported)
5133 -- option may be one of the following:
5135 -- ALL_ON (D) All the complexity metrics are computed
5136 -- ALL_OFF None of complexity metrics is computed
5137 -- CYCLOMATIC_ON Compute the McCabe Cyclomatic Complexity
5138 -- CYCLOMATIC_OFF Do not compute the McCabe Cyclomatic
5140 -- ESSENTIAL_ON Compute the Essential Complexity
5141 -- ESSENTIAL_OFF Do not ompute the Essential Complexity
5142 -- LOOP_NESTIMG_ON Compute the maximal loop nesting
5143 -- LOOP_NESTIMG_OFF Do not compute the maximal loop nesting
5144 -- AVERAGE_COMPLEXITY_ON Compute the average complexity for
5145 -- executable bodies
5146 -- AVERAGE_COMPLEXITY_OFF Do not compute the average complexity for
5147 -- executable bodies
5149 -- All combinations of line metrics options are allowed.
5151 S_Metric_Coupling : aliased constant S := "/COUPLING_METRICS=" &
5155 "--no-counling-all " &
5156 "PACKAGE_EFFERENT_ON " &
5157 "--package-efferent-coupling " &
5158 "PACKAGE_EFFERENT_OFF " &
5159 "--no-package-efferent-coupling " &
5160 "PACKAGE_AFFERENT_ON " &
5161 "--package-afferent-coupling " &
5162 "PACKAGE_AFFERENT_OFF " &
5163 "--no-package-afferent-coupling " &
5164 "CATEGORY_EFFERENT_ON " &
5165 "--category-efferent-coupling " &
5166 "CATEGORY_EFFERENT_OFF " &
5167 "--no-category-efferent-coupling " &
5168 "CATEGORY_AFFERENT_ON " &
5169 "--category-afferent-coupling " &
5170 "CATEGORY_AFFERENT_OFF " &
5171 "--no-category-afferent-coupling";
5173 -- /COUPLING_METRICS=(option, option ...)
5175 -- Specifies the coupling metrics to be computed.
5177 -- option may be one of the following:
5179 -- ALL_ON All the coupling metrics are computed
5180 -- ALL_OFF (D) None of coupling metrics is computed
5181 -- PACKAGE_EFFERENT_ON Compute package efferent coupling
5182 -- PACKAGE_EFFERENT_OFF Do not compute package efferent coupling
5183 -- PACKAGE_AFFERENT_ON Compute package afferent coupling
5184 -- PACKAGE_AFFERENT_OFF Do not compute package afferent coupling
5185 -- CATEGORY_EFFERENT_ON Compute category efferent coupling
5186 -- CATEGORY_EFFERENT_OFF Do not compute category efferent coupling
5187 -- CATEGORY_AFFERENT_ON Compute category afferent coupling
5188 -- CATEGORY_AFFERENT_OFF Do not compute category afferent coupling
5190 -- All combinations of coupling metrics options are allowed.
5192 S_Metric_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
5194 -- /NOFOLLOW_LINKS_FOR_FILES (D)
5195 -- /FOLLOW_LINKS_FOR_FILES
5197 -- Follow links when parsing project files
5199 S_Metric_No_Local : aliased constant S := "/NO_LOCAL_DETAILS " &
5201 -- /LOCAL_DETAILS (D)
5202 -- /NO_LOCAL_DETAILS
5204 -- Do not compute the detailed metrics for local program units.
5206 S_Metric_No_Exits_As_Gotos : aliased constant S := "/NO_EXITS_AS_GOTOS " &
5208 -- /EXITS_AS_GOTOS (D)
5209 -- /NO_EXITS_AS_GOTOS
5211 -- Do not count EXIT statements as GOTOs when computing the Essential
5214 S_Metric_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" &
5221 -- /MESSAGES_PROJECT_FILE[=messages-option]
5223 -- Specifies the "verbosity" of the parsing of project files.
5224 -- messages-option may be one of the following:
5226 -- DEFAULT (D) No messages are output if there is no error or warning.
5228 -- MEDIUM A small number of messages are output.
5230 -- HIGH A great number of messages are output, most of them not
5231 -- being useful for the user.
5233 S_Metric_Project : aliased constant S := "/PROJECT_FILE=<" &
5235 -- /PROJECT_FILE=filename
5237 -- Specifies the main project file to be used. The project files rooted
5238 -- at the main project file will be parsed before the invocation of the
5241 S_Metric_Quiet : aliased constant S := "/QUIET " &
5246 -- Quiet mode: by default GNAT METRIC outputs to the standard error stream
5247 -- the number of program units left to be processed. This option turns
5250 S_Metric_Subdirs : aliased constant S := "/SUBDIRS=<" &
5254 -- The actual directories (object, exec, library, ...) are subdirectories
5255 -- of the directory specified in the project file. If the subdirectory
5256 -- does not exist, it is created automatically.
5258 S_Metric_Suffix : aliased constant S := "/SUFFIX_DETAILS=" & '"' &
5260 -- /SUFFIX_DETAILS=suffix
5262 -- Use the given suffix as the suffix for the name of the file to place
5263 -- the detailed metrics into.
5265 S_Metric_Suppress : aliased constant S := "/SUPPRESS=" &
5267 "!-nocc,!-noec,!-nonl," &
5269 "CYCLOMATIC_COMPLEXITY " &
5271 "ESSENTIAL_COMPLEXITY " &
5273 "MAXIMAL_LOOP_NESTING " &
5279 -- NODOC (see /COMPLEXITY_METRICS /NO_LOCAL_DETAILS /NO_EXITS_AS_GOTOS)
5281 S_Metric_Verbose : aliased constant S := "/VERBOSE " &
5288 S_Metric_XMLout : aliased constant S := "/XML_OUTPUT=@" &
5290 -- /XML_OUTPUT=filename
5292 -- Place the XML output into the specified file
5294 Metric_Switches : aliased constant Switches :=
5295 (S_Metric_Add 'Access,
5296 S_Metric_All_Prjs 'Access,
5297 S_Metric_Complexity 'Access,
5298 S_Metric_Coupling 'Access,
5299 S_Metric_Debug 'Access,
5300 S_Metric_Direct 'Access,
5301 S_Metric_Element 'Access,
5302 S_Metric_Ext 'Access,
5303 S_Metric_Files 'Access,
5304 S_Metric_Follow 'Access,
5305 S_Metric_Format 'Access,
5306 S_Metric_Globout 'Access,
5307 S_Metric_Line 'Access,
5308 S_Metric_Lines 'Access,
5309 S_Metric_Mess 'Access,
5310 S_Metric_No_Exits_As_Gotos'Access,
5311 S_Metric_No_Local 'Access,
5312 S_Metric_Project 'Access,
5313 S_Metric_Quiet 'Access,
5314 S_Metric_Suffix 'Access,
5315 S_Metric_Subdirs 'Access,
5316 S_Metric_Syntax 'Access,
5317 S_Metric_Suppress 'Access,
5318 S_Metric_Verbose 'Access,
5319 S_Metric_XMLout 'Access);
5321 ----------------------------
5322 -- Switches for GNAT NAME --
5323 ----------------------------
5325 S_Name_Conf : aliased constant S := "/CONFIG_FILE=<" &
5327 -- /CONFIG_FILE=path_name
5329 -- Create a configuration pragmas file 'path_name' (instead of the default
5330 -- 'gnat.adc'). 'path_name' may include directory information. 'path_name'
5331 -- must be writable. There may be only one qualifier /CONFIG_FILE.
5332 -- This qualifier is not compatible with qualifier /PROJECT_FILE.
5334 S_Name_Dirs : aliased constant S := "/SOURCE_DIRS=*" &
5336 -- /SOURCE_DIRS=(directory, ...)
5338 -- Look for source files in the specified directories. When this qualifier
5339 -- is specified, the current working directory will not be searched for
5340 -- source files, unless it is explicitly specified with a qualifier
5341 -- /SOURCE_DIRS or /DIRS_FILE. Several qualifiers /SOURCE_DIRS may be
5342 -- specified. If a directory is specified as a relative path, it is
5343 -- relative to the directory of the configuration pragmas file specified
5344 -- with qualifier /CONFIG_FILE, or to the directory of the project file
5345 -- specified with qualifier /PROJECT_FILE or, if neither qualifier
5346 -- /CONFIG_FILE nor qualifier /PROJECT_FILE are specified, it is relative
5347 -- to the current working directory. The directories specified with
5348 -- qualifiers /SOURCE_DIRS must exist and be readable.
5350 S_Name_Dfile : aliased constant S := "/DIRS_FILE=<" &
5352 -- /DIRS_FILE=file_name
5354 -- Look for source files in all directories listed in text file
5355 -- 'file_name'. 'file_name' must be an existing, readable text file.
5356 -- Each non empty line in the specified file must be a directory.
5357 -- Specifying qualifier /DIRS_FILE is equivalent to specifying as many
5358 -- qualifiers /SOURCE_DIRS as there are non empty lines in the specified
5361 S_Name_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
5363 -- /NOFOLLOW_LINKS_FOR_FILES (D)
5364 -- /FOLLOW_LINKS_FOR_FILES
5366 -- Follow links when parsing project files
5368 S_Name_Frng : aliased constant S := "/FOREIGN_PATTERN=" & '"' &
5370 -- /FOREIGN_PATTERN=<string>
5372 -- Specify a foreign pattern.
5373 -- Using this qualifier, it is possible to add sources of languages other
5374 -- than Ada to the list of sources of a project file. It is only useful
5375 -- if a qualifier /PROJECT_FILE is used. For example,
5377 -- GNAT NAME /PROJECT_FILE=PRJ /FOREIGN_PATTERN="*.C" "*.ADA"
5379 -- will look for Ada units in all files with the '.ADA' extension, and
5380 -- will add to the list of file for project PRJ.GPR the C files with
5383 S_Name_Help : aliased constant S := "/HELP " &
5388 -- Output usage information to the standard output stream.
5390 S_Name_Proj : aliased constant S := "/PROJECT_FILE=<" &
5392 -- /PROJECT_FILE=file_name
5394 -- Create or update a project file. 'file_name' may include directory
5395 -- information. The specified file must be writable. There may be only
5396 -- one qualifier /PROJECT_FILE. When a qualifier /PROJECT_DILE is
5397 -- specified, no qualifier /CONFIG_FILE may be specified.
5399 S_Name_Subdirs : aliased constant S := "/SUBDIRS=<" &
5403 -- The actual directories (object, exec, library, ...) are subdirectories
5404 -- of the directory specified in the project file. If the subdirectory
5405 -- does not exist, it is created automatically.
5407 S_Name_Verbose : aliased constant S := "/VERBOSE " &
5412 -- Verbose mode. Output detailed explanation of behavior to the standard
5413 -- output stream. This includes name of the file written, the name of the
5414 -- directories to search and, for each file in those directories whose
5415 -- name matches at least one of the Naming Patterns, an indication of
5416 -- whether the file contains a unit, and if so the name of the unit.
5418 S_Name_Excl : aliased constant S := "/EXCLUDED_PATTERN=" & '"' &
5420 -- /EXCLUDED_PATTERN=<string>
5422 -- Specify an excluded pattern.
5423 -- Using this qualifier, it is possible to exclude some files that would
5424 -- match the Naming patterns. For example,
5426 -- GNAT NAME /EXCLUDED_PATTERN="*_NT.ADA" "*.ADA"
5428 -- will look for Ada units in all files with the '.ADA' extension, except
5429 -- those whose names end with '_NT.ADA'.
5431 Name_Switches : aliased constant Switches :=
5432 (S_Name_Conf 'Access,
5433 S_Name_Dirs 'Access,
5434 S_Name_Dfile 'Access,
5435 S_Name_Follow 'Access,
5436 S_Name_Frng 'Access,
5437 S_Name_Help 'Access,
5438 S_Name_Proj 'Access,
5439 S_Name_Subdirs 'Access,
5440 S_Name_Verbose 'Access,
5441 S_Name_Excl 'Access);
5443 ----------------------------------
5444 -- Switches for GNAT PREPROCESS --
5445 ----------------------------------
5447 S_Prep_Assoc : aliased constant S := "/ASSOCIATE=" & '"' &
5449 -- /ASSOCIATE="name=val"
5451 -- Defines a new symbol, associated with value. If no value is given
5452 -- on the command line, then symbol is considered to be True.
5453 -- This qualifier can be used in place of a definition file.
5455 S_Prep_Blank : aliased constant S := "/BLANK_LINES " &
5457 -- /NOBLANK_LINES (D)
5460 -- Causes both preprocessor lines and the lines deleted by preprocessing
5461 -- to be replaced by blank lines in the output source file, thus
5462 -- preserving line numbers in the output file.
5464 S_Prep_Com : aliased constant S := "/COMMENTS " &
5469 -- /COMMENTS causes both preprocessor lines and the lines deleted
5470 -- by preprocessing to be retained in the output source as comments marked
5471 -- with the special string "--! ". This option will result in line numbers
5472 -- being preserved in the output file.
5474 -- /NOCOMMENTS causes both preprocessor lines and the lines deleted by
5475 -- preprocessing to be replaced by blank lines in the output source file,
5476 -- thus preserving line numbers in the output file.
5478 S_Prep_Ref : aliased constant S := "/REFERENCE " &
5483 -- Causes a "Source_Reference" pragma to be generated that references the
5484 -- original input file, so that error messages will use the file name of
5485 -- this original file. Also implies /BLANK_LINES if /COMMENTS is not
5488 S_Prep_Remove : aliased constant S := "/REMOVE " &
5493 -- Preprocessor lines and deleted lines are completely removed from the
5496 S_Prep_Replace : aliased constant S := "/REPLACE_IN_COMMENTS " &
5498 -- /NOREPLACE_IN_COMMENTS (D)
5499 -- /REPLACE_IN_COMMENTS
5501 -- Causes preprocessor to scan comments and perform replacements on
5502 -- any $symbol occurrences within the comment text.
5504 S_Prep_Symbols : aliased constant S := "/SYMBOLS " &
5509 -- Causes a sorted list of symbol names and values to be listed on
5512 S_Prep_Undef : aliased constant S := "/UNDEFINED " &
5517 Prep_Switches : aliased constant Switches :=
5518 (S_Prep_Assoc 'Access,
5519 S_Prep_Blank 'Access,
5522 S_Prep_Remove 'Access,
5523 S_Prep_Replace 'Access,
5524 S_Prep_Symbols 'Access,
5525 S_Prep_Undef 'Access);
5527 ------------------------------
5528 -- Switches for GNAT PRETTY --
5529 ------------------------------
5531 S_Pretty_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
5533 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
5535 -- Add directories to the project search path.
5537 S_Pretty_Align : aliased constant S := "/ALIGN=" &
5550 "COMPONENT_CLAUSES " &
5552 -- /ALIGN[=align-option, align-option, ...]
5554 -- Set alignments. By default, all alignments (colons in declarations,
5555 -- initialisations in declarations, assignments and arrow delimiters) are
5558 -- align-option may be one of the following:
5560 -- OFF (D) Set all alignments to OFF
5561 -- COLONS Set alignments of colons in declarations to ON
5562 -- DECLARATIONS Set alignments of initialisations in declarations
5564 -- STATEMENTS Set alignments of assignments statements to ON
5565 -- ARROWS Set alignments of arrow delimiters to ON.
5566 -- COMPONENT_CLAUSES Set alignments of AT keywords in component
5569 -- Specifying one of the ON options without first specifying the OFF
5570 -- option has no effect, because by default all alignments are set to ON.
5572 S_Pretty_All_Prjs : aliased constant S := "/ALL_PROJECTS " &
5574 -- /NOALL_PROJECTS (D)
5576 -- When GNAT PRETTY is used with a Project File and no source is
5577 -- specified, the underlying tool gnatpp is called for all the
5578 -- sources of all the Project Files in the project tree.
5580 S_Pretty_Attrib : aliased constant S := "/ATTRIBUTE_CASING=" &
5587 -- /ATTRIBUTE_CASING[=casing-option]
5589 -- Set the case of the attributes. By default the attributes are in mixed
5591 -- casing-option may be one of the following:
5597 S_Pretty_Comments : aliased constant S := "/COMMENTS_LAYOUT=" &
5602 "STANDARD_INDENT " &
5610 -- /COMMENTS_LAYOUT[=layout-option, layout-option, ...]
5612 -- Set the comment layout. By default, comments use the GNAT style
5613 -- comment line indentation.
5615 -- layout-option may be one of the following:
5617 -- UNTOUCHED All the comments remain unchanged
5618 -- DEFAULT (D) GNAT style comment line indentation
5619 -- STANDARD_INDENT Standard comment line indentation
5620 -- GNAT_BEGINNING GNAT style comment beginning
5621 -- REFORMAT Reformat comment blocks
5622 -- KEEP_SPECIAL Keep unchanged special form comments
5624 -- All combinations of layout options are allowed, except for DEFAULT
5625 -- and STANDARD_INDENT which are mutually exclusive, and also if
5626 -- UNTOUCHED is specified, this must be the only option.
5628 -- The difference between "GNAT style comment line indentation" and
5629 -- "standard comment line indentation" is the following: for standard
5630 -- comment indentation, any comment line is indented as if it were
5631 -- a declaration or statement at the same place.
5632 -- For GNAT style comment indentation, comment lines which are
5633 -- immediately followed by if or case statement alternative, record
5634 -- variant or 'begin' keyword are indented as the keyword that follows
5637 -- Standard indentation:
5646 -- GNAT style indentation:
5655 -- Option "GNAT style comment beginning" means that for each comment
5656 -- which is not considered as non-formattable separator (that is, the
5657 -- comment line contains only dashes, or a comment line ends with two
5658 -- dashes), there will be at least two spaces between starting "--" and
5659 -- the first non-blank character of the comment.
5661 S_Pretty_Config : aliased constant S := "/CONFIGURATION_PRAGMAS_FILE=<" &
5663 -- /CONFIGURATION_PRAGMAS_FILE=file
5665 -- Specify a configuration pragmas file that need to be passed to the
5668 S_Pretty_Constr : aliased constant S := "/CONSTRUCT_LAYOUT=" &
5675 -- /CONSTRUCT_LAYOUT[=construct-option]
5677 -- Set construct layout. Default is GNAT style layout.
5678 -- construct-option may be one of the following:
5684 -- The difference between GNAT style and Compact layout on one hand
5685 -- and Uncompact layout on the other hand can be illustrated by the
5686 -- following examples:
5688 -- GNAT style and Uncompact layout
5691 -- type q is record type q is
5692 -- a : integer; record
5693 -- b : integer; a : integer;
5694 -- end record; b : integer;
5698 -- Block : declare Block :
5699 -- A : Integer := 3; declare
5700 -- begin A : Integer := 3;
5701 -- Proc (A, A); begin
5702 -- end Block; Proc (A, A);
5705 -- Clear : for J in 1 .. 10 loop Clear :
5706 -- A (J) := 0; for J in 1 .. 10 loop
5707 -- end loop Clear; A (J) := 0;
5711 -- A further difference between GNAT style layout and compact layout is
5712 -- that in GNAT style layout compound statements, return statements and
5713 -- bodies are always separated by empty lines.
5715 S_Pretty_Comind : aliased constant S := "/CONTINUATION_INDENT=#" &
5717 -- /CONTINUATION_INDENT=nnn
5719 -- Indentation level for continuation lines, nnn from 1 .. 9.
5720 -- The default value is one less then the (normal) indentation level,
5721 -- unless the indentation is set to 1: in that case the default value for
5722 -- continuation line indentation is also 1.
5724 S_Pretty_Compact_Is : aliased constant S := "/NO_SEPARATE_IS " &
5728 -- Do not place the IS keyword on a separate line in a subprogram body in
5729 -- case if the specification occupies more then one line.
5731 S_Pretty_Sep_Loop_Then : aliased constant S := "/SEPARATE_LOOP_THEN " &
5732 "--separate-loop-then";
5733 -- /SEPARATE_LOOP_THEN
5735 -- Place the THEN keyword in IF statement and the LOOP keyword in for-
5736 -- and while-loops on a separate line.
5738 S_Pretty_N_Sep_Loop_Then : aliased constant S := "/NO_SEPARATE_LOOP_THEN " &
5739 "--no-separate-loop-then";
5740 -- /NO_SEPARATE_LOOP_THEN
5742 -- Do not place the THEN keyword in IF statement and the LOOP keyword in
5743 -- for- and while-loops on a separate line.
5745 S_Pretty_Use_On_New_Line : aliased constant S := "/USE_ON_NEW_LINE " &
5746 "--use-on-new-line";
5749 -- Start any USE clause that is a part of a context clause from a
5752 S_Pretty_Stnm_On_Nw_Line : aliased constant S := "/STMT_NAME_ON_NEW_LINE " &
5753 "--separate-stmt-name";
5754 -- /STMT_NAME_ON_NEW_LINE
5756 -- For named block and loop statements use a separate line for the
5757 -- statement name, but do not use an extra indentation level for the
5758 -- statement itself.
5760 S_Pretty_Eol : aliased constant S := "/END_OF_LINE=" &
5769 -- /END_OF_LINE=[option]
5771 -- Specifies the form of the line terminators in the produced source.
5772 -- By default, the form of the line terminator depends on the platforms.
5773 -- On Unix and VMS, it is a Line Feed (LF) chararcter. On Windows (DOS),
5774 -- It is a Carriage Return (CR) followed by a Line Feed.
5775 -- The Options DOS and CRLF are equivalent. The options UNIX and LF are
5778 S_Pretty_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' &
5780 -- /EXTERNAL_REFERENCE="name=val"
5782 -- Specifies an external reference to the project manager. Useful only if
5783 -- /PROJECT_FILE is used.
5786 -- /EXTERNAL_REFERENCE="DEBUG=TRUE"
5788 S_Pretty_Current : aliased constant S := "/CURRENT_DIRECTORY " &
5790 -- /CURRENT_DIRECTORY (D)
5792 -- Look for source files in the current working directory.
5794 -- /NOCURRENT_DIRECTORY
5795 -- Do not look for source files in the current working directory.
5797 S_Pretty_Dico : aliased constant S := "/DICTIONARY=*" &
5799 -- /DICTIONARY=(file_name, ...)
5801 -- Use each specified file as a dictionary file that defines the casing
5802 -- for a set of specified names, thereby overriding the effect on these
5803 -- names by any explicit or implicit /NAME_CASING qualifier.
5805 -- GNAT PRETTY implicitly uses a default dictionary file to define the
5806 -- casing for the Ada predefined names and the names declared in the GNAT
5809 -- The structure of a dictionary file, and details on the conventions
5810 -- used in the default dictionary file, are defined in the GNAT User's
5813 S_Pretty_Encoding : aliased constant S := "/RESULT_ENCODING=" &
5826 -- /RESULT_ENCODING[=encoding-type]
5828 -- Specify the wide character encoding method used when writtimg the
5829 -- reformatted code in the result file. 'encoding-type' is one of the
5832 -- BRACKETS (D) Brackets encoding.
5834 -- HEX Hex ESC encoding.
5836 -- UPPER Upper half encoding.
5838 -- SHIFT_JIS Shift-JIS encoding.
5840 -- EUC EUC Encoding.
5842 -- UTF8 UTF-8 encoding.
5844 -- See 'HELP GNAT COMPILE /WIDE_CHARACTER_ENCODING' for an explanation
5845 -- about the different character encoding methods.
5847 S_Pretty_Files : aliased constant S := "/FILES=@" &
5851 -- Take as arguments the files that are listed in the specified
5854 S_Pretty_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
5856 -- /NOFOLLOW_LINKS_FOR_FILES (D)
5857 -- /FOLLOW_LINKS_FOR_FILES
5859 -- Follow links when parsing project files
5861 S_Pretty_Forced : aliased constant S := "/FORCED_OUTPUT=@" &
5863 -- /FORCED_OUTPUT=file
5865 -- Write the output into the specified file, overriding any possibly
5868 S_Pretty_Formfeed : aliased constant S := "/FORM_FEED_AFTER_PRAGMA_PAGE " &
5870 -- /FORM_FEED_AFTER_PRAGMA_PAGE
5872 -- When there is a pragma Page in the source, insert a Form Feed
5873 -- character immediately after the semicolon that follows the pragma
5876 S_Pretty_Indent : aliased constant S := "/INDENTATION_LEVEL=#" &
5878 -- /INDENTATION_LEVEL=nnn
5880 -- Specify the number of spaces to add for each indentation level.
5881 -- nnn must be between 1 and 9. The default is 3.
5883 S_Pretty_Keyword : aliased constant S := "/KEYWORD_CASING=" &
5888 -- /KEYWORD_CASING[=keyword-option]
5890 -- Specify the case of Ada keywords. The default is keywords in lower
5892 -- keyword-option may be one of the following:
5897 S_Pretty_Maxlen : aliased constant S := "/LINE_LENGTH_MAX=#" &
5899 -- /LINE_LENGTH_MAX=nnn
5901 -- Set the maximum line length, nnn from 32 ..256. The default is 79.
5903 S_Pretty_Maxind : aliased constant S := "/MAX_INDENT=#" &
5907 -- Do not use an additional indentation level for case alternatives
5908 -- and variants if their number is nnn or more. The default is 10.
5909 -- If nnn is zero, an additional indentation level is used for any number
5910 -- of case alternatives and variants.
5912 S_Pretty_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" &
5919 -- /MESSAGES_PROJECT_FILE[=messages-option]
5921 -- Specifies the "verbosity" of the parsing of project files.
5922 -- messages-option may be one of the following:
5924 -- DEFAULT (D) No messages are output if there is no error or warning.
5926 -- MEDIUM A small number of messages are output.
5928 -- HIGH A great number of messages are output, most of them not
5929 -- being useful for the user.
5931 S_Pretty_Names : aliased constant S := "/NAME_CASING=" &
5940 -- /NAME_CASING[=name-option]
5942 -- Specify the casing of names.
5943 -- 'name-option' may be one of:
5945 -- AS_DECLARED (D) Name casing for defining occurrences are as they
5946 -- appear in the source file.
5948 -- LOWER_CASE Names are in lower case.
5950 -- UPPER_CASE Names are in upper case.
5952 -- MIXED_CASE Names are in mixed case.
5954 S_Pretty_Replace_No_Backup : aliased constant S := "/REPLACE_NO_BACKUP " &
5956 -- /REPLACE_NO_BACKUP
5958 -- Replace the argument source with the pretty-printed source without
5959 -- creating any backup copy of the argument source.
5961 S_Pretty_No_Labels : aliased constant S := "/NO_MISSED_LABELS " &
5963 -- /NO_MISSED_LABELS
5965 -- Do not insert missing end/exit labels. The end label is the name of
5966 -- a construct that may optionally appear at the end of the construct.
5967 -- This includes the names of packages and subprograms.
5968 -- Similarly, the exit label is the name of a loop that may appear as the
5969 -- argument of an exit statement within the loop. By default, GNAT PRETTY
5970 -- inserts these end/exit labels when they are absent in the original
5971 -- source. This qualifier /NO_MISSED_LABELS suppresses this insertion,
5972 -- so that the formatted source reflects the original.
5974 S_Pretty_Notabs : aliased constant S := "/NOTABS " &
5978 -- Replace all tabulations in comments with spaces.
5980 S_Pretty_Output : aliased constant S := "/OUTPUT=@" &
5984 -- Write the output to the specified file. If the file already exists,
5985 -- an error is reported.
5987 S_Pretty_Override : aliased constant S := "/OVERRIDING_REPLACE " &
5989 -- /NOOVERRIDING_REPLACE (D)
5990 -- /OVERRIDING_REPLACE
5992 -- Replace the argument source with the pretty-printed source and copy the
5993 -- argument source into filename.NPP, overriding any existing file if
5996 S_Pretty_Pragma : aliased constant S := "/PRAGMA_CASING=" &
6003 -- /PRAGMA_CASING[=pragma-option]
6005 -- Set the case of pragma identifiers. The default is Mixed case.
6006 -- pragma-option may be one of the following:
6012 S_Pretty_Project : aliased constant S := "/PROJECT_FILE=<" &
6014 -- /PROJECT_FILE=filename
6016 -- Specifies the main project file to be used. The project files rooted
6017 -- at the main project file will be parsed before any other processing to
6018 -- set the building environment.
6020 S_Pretty_Replace : aliased constant S := "/REPLACE " &
6025 -- Replace the argument source with the pretty-printed source and copy the
6026 -- argument source into filename.NPP. If filename.NPP already exists,
6027 -- report an error and exit.
6029 S_Pretty_RTS : aliased constant S := "/RUNTIME_SYSTEM=|" &
6031 -- /RUNTIME_SYSTEM=xxx
6033 -- Compile against an alternate runtime system named xxx or RTS-xxx.
6035 S_Pretty_Search : aliased constant S := "/SEARCH=*" &
6037 -- /SEARCH=(directory[,...])
6039 -- When looking for source files also look in directories specified.
6041 S_Pretty_Specific : aliased constant S := "/SPECIFIC_CASING " &
6045 -- Do not use the default dictionary file; instead, use the casing
6046 -- defined by a qualifier /NAME_CASING and/or any explicit dictionary
6047 -- file specified by a qualifier /DICTIONARY.
6049 S_Pretty_Standard : aliased constant S := "/STANDARD_OUTPUT " &
6051 -- /NOSTANDARD_OUTPUT (D)
6054 -- Redirect the output to the standard output.
6056 S_Pretty_Subdirs : aliased constant S := "/SUBDIRS=<" &
6060 -- The actual directories (object, exec, library, ...) are subdirectories
6061 -- of the directory specified in the project file. If the subdirectory
6062 -- does not exist, it is created automatically.
6064 S_Pretty_Verbose : aliased constant S := "/VERBOSE " &
6069 -- Verbose mode; GNAT PRETTY generates version information and then a
6070 -- trace of the actions it takes to produce or obtain the ASIS tree.
6072 S_Pretty_Warnings : aliased constant S := "/WARNINGS " &
6077 -- Issue a warning to the standard error stream if it is not possible
6078 -- to provide the required layout in the result source.
6079 -- By default such warnings are not activated.
6081 Pretty_Switches : aliased constant Switches :=
6082 (S_Pretty_Add 'Access,
6083 S_Pretty_Align 'Access,
6084 S_Pretty_All_Prjs 'Access,
6085 S_Pretty_Attrib 'Access,
6086 S_Pretty_Comments 'Access,
6087 S_Pretty_Compact_Is 'Access,
6088 S_Pretty_Config 'Access,
6089 S_Pretty_Constr 'Access,
6090 S_Pretty_Comind 'Access,
6091 S_Pretty_Current 'Access,
6092 S_Pretty_Dico 'Access,
6093 S_Pretty_Eol 'Access,
6094 S_Pretty_Ext 'Access,
6095 S_Pretty_Encoding 'Access,
6096 S_Pretty_Files 'Access,
6097 S_Pretty_Follow 'Access,
6098 S_Pretty_Forced 'Access,
6099 S_Pretty_Formfeed 'Access,
6100 S_Pretty_Indent 'Access,
6101 S_Pretty_Keyword 'Access,
6102 S_Pretty_Maxlen 'Access,
6103 S_Pretty_Maxind 'Access,
6104 S_Pretty_Mess 'Access,
6105 S_Pretty_Names 'Access,
6106 S_Pretty_No_Labels 'Access,
6107 S_Pretty_Notabs 'Access,
6108 S_Pretty_Output 'Access,
6109 S_Pretty_Override 'Access,
6110 S_Pretty_Pragma 'Access,
6111 S_Pretty_Replace 'Access,
6112 S_Pretty_Replace_No_Backup'Access,
6113 S_Pretty_Project 'Access,
6114 S_Pretty_RTS 'Access,
6115 S_Pretty_Search 'Access,
6116 S_Pretty_Sep_Loop_Then 'Access,
6117 S_Pretty_N_Sep_Loop_Then 'Access,
6118 S_Pretty_Subdirs 'Access,
6119 S_Pretty_Use_On_New_Line 'Access,
6120 S_Pretty_Stnm_On_Nw_Line 'Access,
6121 S_Pretty_Specific 'Access,
6122 S_Pretty_Standard 'Access,
6123 S_Pretty_Verbose 'Access,
6124 S_Pretty_Warnings 'Access);
6126 ------------------------------
6127 -- Switches for GNAT SHARED --
6128 ------------------------------
6130 S_Shared_Debug : aliased constant S := "/DEBUG=" &
6139 -- /DEBUG[=debug-option]
6142 -- Specifies the amount of debugging information included. 'debug-option'
6143 -- is one of the following:
6145 -- ALL (D) Include full debugging information.
6147 -- NONE Provide no debugging information. Same as /NODEBUG.
6149 -- TRACEBACK Provide sufficient debug information for a traceback.
6151 -- NOTRACEBACK Same as NONE.
6153 S_Shared_Image : aliased constant S := "/IMAGE=@" &
6155 -- /IMAGE=image-name
6157 -- 'image-name' specifies the name for the generated shared library.
6159 S_Shared_Ident : aliased constant S := "/IDENTIFICATION=" & '"' &
6160 "--for-linker=IDENT=" &
6162 -- /IDENTIFICATION="<string>"
6164 -- "<string>" specifies the string to be stored in the image file ident-
6165 -- ification field in the image header. It overrides any pragma Ident
6166 -- specified string.
6168 S_Shared_Nofiles : aliased constant S := "/NOSTART_FILES " &
6172 -- Link in default image initialization and startup functions.
6174 S_Shared_Noinhib : aliased constant S := "/NOINHIBIT-IMAGE " &
6175 "--for-linker=--noinhibit-exec";
6178 -- Delete image if there are errors or warnings.
6180 S_Shared_Verb : aliased constant S := "/VERBOSE " &
6185 -- Causes additional information to be output, including a full list of
6186 -- the included object files. This switch option is most useful when you
6187 -- want to see what set of object files are being used in the link step.
6189 S_Shared_ZZZZZ : aliased constant S := "/<other> " &
6193 -- Any other switch transmitted to the underlying linker.
6195 Shared_Switches : aliased constant Switches :=
6196 (S_Shared_Debug 'Access,
6197 S_Shared_Image 'Access,
6198 S_Shared_Ident 'Access,
6199 S_Shared_Nofiles 'Access,
6200 S_Shared_Noinhib 'Access,
6201 S_Shared_Verb 'Access,
6202 S_Shared_ZZZZZ 'Access);
6204 -----------------------------
6205 -- Switches for GNAT STACK --
6206 -----------------------------
6208 S_Stack_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
6210 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
6212 -- Add directories to the project search path.
6214 S_Stack_All : aliased constant S := "/ALL_SUBPROGRAMS " &
6216 -- /NOALL_SUBPROGRAMS (D)
6219 -- Consider all subprograms as entry points.
6221 S_Stack_All_Cycles : aliased constant S := "/ALL_CYCLES " &
6223 -- /NOALL_CYCLES (D)
6226 -- Extract all possible cycles in the call graph.
6228 S_Stack_All_Prjs : aliased constant S := "/ALL_PROJECTS " &
6230 -- /NOALL_PROJECTS (D)
6233 -- When GNAT STACK is used with a Project File and no source is
6234 -- specified, the underlying tool gnatstack is called for all the
6235 -- units of all the Project Files in the project tree.
6237 S_Stack_Debug : aliased constant S := "/DEBUG " &
6242 -- Generate internal debug information.
6244 S_Stack_Directory : aliased constant S := "/DIRECTORY=*" &
6246 -- /DIRECTORY=(direc[,...])
6248 -- When looking for .ci files look also in directories specified.
6250 S_Stack_Entries : aliased constant S := "/ENTRIES=*" &
6253 -- /ENTRY=(entry_point[,...])
6255 -- Name of symbol to be used as entry point for the analysis.
6257 S_Stack_Files : aliased constant S := "/FILES=@" &
6261 -- Take as arguments the files that are listed in the specified
6264 S_Stack_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
6266 -- /NOFOLLOW_LINKS_FOR_FILES (D)
6267 -- /FOLLOW_LINKS_FOR_FILES
6269 -- Follow links when parsing project files
6271 S_Stack_Help : aliased constant S := "/HELP " &
6276 -- Output a message explaining the usage of gnatstack.
6278 S_Stack_List : aliased constant S := "/LIST=#" &
6282 -- Print the nnn subprograms requiring the biggest local stack usage. By
6283 -- default none will be displayed.
6285 S_Stack_Order : aliased constant S := "/ORDER=" &
6290 -- /ORDER[=order-option]
6292 -- Specifies the order for displaying the different call graphs.
6293 -- order-option may be one of the following:
6295 -- STACK (D) Select stack usage order
6297 -- ALPHABETICAL Select alphabetical order
6299 S_Stack_Path : aliased constant S := "/PATH " &
6304 -- Print all the subprograms that make up the worst-case path for every
6307 S_Stack_Project : aliased constant S := "/PROJECT_FILE=<" &
6309 -- /PROJECT_FILE=filename
6311 -- Specifies the main project file to be used. The project files rooted
6312 -- at the main project file will be parsed before the invocation of
6315 S_Stack_Output : aliased constant S := "/OUTPUT=@" &
6319 -- Name of the file containing the generated graph (VCG format).
6321 S_Stack_Regexp : aliased constant S := "/EXPRESSION=|" &
6324 -- /EXPRESSION=regular-expression
6326 -- Any symbol matching the regular expression will be considered as a
6327 -- potential entry point for the analysis.
6329 S_Stack_Subdirs : aliased constant S := "/SUBDIRS=<" &
6333 -- The actual directories (object, exec, library, ...) are subdirectories
6334 -- of the directory specified in the project file. If the subdirectory
6335 -- does not exist, it is created automatically.
6337 S_Stack_Unbounded : aliased constant S := "/UNBOUNDED=#" &
6341 -- Default stack size to be used for unbounded (dynamic) frames.
6343 S_Stack_Unknown : aliased constant S := "/UNKNOWN=#" &
6347 -- Default stack size to be used for unknown (external) calls.
6349 S_Stack_Verbose : aliased constant S := "/VERBOSE " &
6354 -- Specifies the amount of information to be displayed about the
6355 -- different subprograms. In verbose mode the full location of the
6356 -- subprogram will be part of the output, as well as detailed information
6357 -- about inaccurate data.
6359 S_Stack_Warnings : aliased constant S := "/WARNINGS=" &
6370 -- /WARNINGS[=(keyword[,...])]
6372 -- The following keywords are supported:
6374 -- ALL Turn on all optional warnings
6376 -- CYCLES Turn on warnings for cycles
6378 -- UNBOUNDED Turn on warnings for unbounded frames
6380 -- EXTERNAL Turn on warnings for external calls
6382 -- INDIRECT Turn on warnings for indirect calls
6384 Stack_Switches : aliased constant Switches :=
6385 (S_Stack_Add 'Access,
6386 S_Stack_All 'Access,
6387 S_Stack_All_Cycles 'Access,
6388 S_Stack_All_Prjs 'Access,
6389 S_Stack_Debug 'Access,
6390 S_Stack_Directory 'Access,
6391 S_Stack_Entries 'Access,
6392 S_Stack_Files 'Access,
6393 S_Stack_Follow 'Access,
6394 S_Stack_Help 'Access,
6395 S_Stack_List 'Access,
6396 S_Stack_Order 'Access,
6397 S_Stack_Path 'Access,
6398 S_Stack_Project 'Access,
6399 S_Stack_Output 'Access,
6400 S_Stack_Regexp 'Access,
6401 S_Stack_Subdirs 'Access,
6402 S_Stack_Unbounded 'Access,
6403 S_Stack_Unknown 'Access,
6404 S_Stack_Verbose 'Access,
6405 S_Stack_Warnings 'Access);
6407 ----------------------------
6408 -- Switches for GNAT STUB --
6409 ----------------------------
6411 S_Stub_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
6413 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
6415 -- Add directories to the project search path.
6417 S_Stub_Config : aliased constant S := "/CONFIGURATION_PRAGMAS_FILE=<" &
6419 -- /CONFIGURATION_PRAGMAS_FILE=filespec
6421 -- Specifies a configuration pragmas file that must be taken into account
6424 S_Stub_Current : aliased constant S := "/CURRENT_DIRECTORY " &
6426 -- /CURRENT_DIRECTORY (D)
6427 -- /NOCURRENT_DIRECTORY
6429 -- Look for source, library or object files in the default directory.
6431 S_Stub_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' &
6433 -- /EXTERNAL_REFERENCE="name=val"
6435 -- Specifies an external reference to the project manager. Useful only if
6436 -- /PROJECT_FILE is used.
6439 -- /EXTERNAL_REFERENCE="DEBUG=TRUE"
6441 S_Stub_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
6443 -- /NOFOLLOW_LINKS_FOR_FILES (D)
6444 -- /FOLLOW_LINKS_FOR_FILES
6446 -- Follow links when parsing project files
6448 S_Stub_Full : aliased constant S := "/FULL " &
6453 -- If the destination directory already contains a file with the name of
6454 -- the body file for the argument file spec, replace it with the generated
6455 -- body stub. If /FULL is not used and there is already a body file, this
6456 -- existing body file is not replaced.
6458 S_Stub_Header : aliased constant S := "/HEADER=" &
6463 -- /HEADER[=header-option]
6465 -- Specifies the form of the comment header above the generated body stub.
6466 -- If no /HEADER qualifier is specified, there is no comment header.
6467 -- header-option is one of the following:
6470 -- GENERAL (D) Put a sample comment header into the body stub.
6472 -- SPEC Put the comment header (i.e., all the comments
6473 -- preceding the compilation unit) from the source of the
6474 -- library unit declaration into the body stub.
6476 S_Stub_Header_File : aliased constant S := "/FROM_HEADER_FILE=<" &
6479 -- /FROM_HEADER_FILE==filename
6481 -- Use the content of the file as the comment header for a generated body
6484 S_Stub_Indent : aliased constant S := "/INDENTATION=#" &
6488 -- (nnn is a non-negative integer). Set the indentation level in the
6489 -- generated body stub to nnn. nnn=0 means "no indentation".
6490 -- Default insdentation is 3.
6492 S_Stub_Keep : aliased constant S := "/KEEP " &
6497 -- Do not delete the tree file (i.e., the snapshot of the compiler
6498 -- internal structures used by gnatstub) after creating the body stub.
6500 S_Stub_Length : aliased constant S := "/LINE_LENGTH=#" &
6504 -- (n is a non-negative integer). Set the maximum line length in the body
6505 -- stub to nnn. Default is 78.
6507 S_Stub_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" &
6514 -- /MESSAGES_PROJECT_FILE[=messages-option]
6516 -- Specifies the "verbosity" of the parsing of project files.
6517 -- messages-option may be one of the following:
6519 -- DEFAULT (D) No messages are output if there is no error or warning.
6521 -- MEDIUM A small number of messages are output.
6523 -- HIGH A great number of messages are output, most of them not
6524 -- being useful for the user.
6526 S_Stub_Output : aliased constant S := "/OUTPUT=@" &
6530 -- Body file name. This should be set if the argument file name does not
6531 -- follow the GNAT file naming conventions. If this switch is omitted,
6532 -- the default name for the body will be obtained from the argument file
6533 -- name according to the GNAT file naming conventions.
6535 S_Stub_Project : aliased constant S := "/PROJECT_FILE=<" &
6537 -- /PROJECT_FILE=filename
6539 -- Specifies the main project file to be used. The project files rooted
6540 -- at the main project file will be parsed before any other processing.
6541 -- The source and object directories to be searched will be communicated
6542 -- to gnatstub through logical names ADA_PRJ_INCLUDE_FILE and
6543 -- ADA_PRJ_OBJECTS_FILE.
6545 S_Stub_Quiet : aliased constant S := "/QUIET " &
6550 -- Quiet mode: do not generate a confirmation when a body is successfully
6551 -- created, and do not generate a message when a body is not required for
6552 -- an argument unit.
6554 S_Stub_Search : aliased constant S := "/SEARCH=*" &
6556 -- /SEARCH=(directory[,...])
6558 -- When looking for source files also look in directories specified.
6560 S_Stub_Subdirs : aliased constant S := "/SUBDIRS=<" &
6564 -- The actual directories (object, exec, library, ...) are subdirectories
6565 -- of the directory specified in the project file. If the subdirectory
6566 -- does not exist, it is created automatically.
6568 S_Stub_Tree : aliased constant S := "/TREE_FILE=" &
6575 -- /TREE_FILE[=treefile-option]
6577 -- Specify what to do with the tree file.
6578 -- treefile-option is one of the following:
6580 -- OVERWRITE (D) Overwrite the existing tree file. If the current
6581 -- directory already contains the file which, according
6582 -- to the GNAT file naming rules should be considered
6583 -- as a tree file for the argument source file,
6584 -- gnatstub will refuse to create the tree file needed
6585 -- to create a sample body unless this option is chosen.
6587 -- SAVE Do not remove the tree file (i.e., the snapshot
6588 -- of the compiler internal structures used by gnatstub)
6589 -- after creating the body stub.
6591 -- REUSE Reuse the tree file (if it exists) instead of
6593 -- Instead of creating the tree file for the library
6594 -- unit declaration, gnatstub tries to find it in the
6595 -- current directory and use it for creating a body.
6596 -- If the tree file is not found, no body is created.
6597 -- This option also implies `SAVE', whether or not the
6598 -- latter is set explicitly.
6600 S_Stub_Verbose : aliased constant S := "/VERBOSE " &
6605 -- Verbose mode: generate version information.
6607 Stub_Switches : aliased constant Switches :=
6608 (S_Stub_Add 'Access,
6609 S_Stub_Config 'Access,
6610 S_Stub_Current 'Access,
6612 S_Stub_Follow 'Access,
6613 S_Stub_Full 'Access,
6614 S_Stub_Header 'Access,
6615 S_Stub_Header_File'Access,
6616 S_Stub_Indent 'Access,
6617 S_Stub_Keep 'Access,
6618 S_Stub_Length 'Access,
6619 S_Stub_Mess 'Access,
6620 S_Stub_Output 'Access,
6621 S_Stub_Project 'Access,
6622 S_Stub_Quiet 'Access,
6623 S_Stub_Search 'Access,
6624 S_Stub_Subdirs 'Access,
6625 S_Stub_Tree 'Access,
6626 S_Stub_Verbose 'Access);
6628 ----------------------------
6629 -- Switches for GNAT XREF --
6630 ----------------------------
6632 S_Xref_Add : aliased constant S := "/ADD_PROJECT_SEARCH_DIR=*" &
6634 -- /ADD_PROJECT_SEARCH_PATH=(directory[,...])
6636 -- Add directories to the project search path.
6638 S_Xref_All : aliased constant S := "/ALL_FILES " &
6643 -- If this switch is present, FIND and XREF will parse the read-only
6644 -- files found in the library search path. Otherwise, these files will
6645 -- be ignored. This option can be used to protect Gnat sources or your
6646 -- own libraries from being parsed, thus making FIND and XREF much
6647 -- faster, and their output much smaller.
6649 S_Xref_Deriv : aliased constant S := "/DERIVED_TYPES " &
6651 -- /NODERIVED_TYPES (D)
6654 -- Output the parent type reference for each matching derived types.
6656 S_Xref_Ext : aliased constant S := "/EXTERNAL_REFERENCE=" & '"' &
6658 -- /EXTERNAL_REFERENCE="name=val"
6660 -- Specifies an external reference to the project manager. Useful only if
6661 -- /PROJECT_FILE is used.
6664 -- /EXTERNAL_REFERENCE="DEBUG=TRUE"
6666 S_Xref_Follow : aliased constant S := "/FOLLOW_LINKS_FOR_FILES " &
6668 -- /NOFOLLOW_LINKS_FOR_FILES (D)
6669 -- /FOLLOW_LINKS_FOR_FILES
6671 -- Follow links when parsing project files
6673 S_Xref_Full : aliased constant S := "/FULL_PATHNAME " &
6675 -- /NOFULL_PATHNAME (D)
6678 -- If this switch is set, the output file names will be preceded by their
6679 -- directory (if the file was found in the search path). If this switch
6680 -- is not set, the directory will not be printed.
6682 S_Xref_Global : aliased constant S := "/IGNORE_LOCALS " &
6684 -- /NOIGNORE_LOCALS (D)
6687 -- If this switch is set, information is output only for library-level
6688 -- entities, ignoring local entities. The use of this switch may
6689 -- accelerate FIND and XREF.
6691 S_Xref_Mess : aliased constant S := "/MESSAGES_PROJECT_FILE=" &
6698 -- /MESSAGES_PROJECT_FILE[=messages-option]
6700 -- Specifies the "verbosity" of the parsing of project files.
6701 -- messages-option may be one of the following:
6703 -- DEFAULT (D) No messages are output if there is no error or warning.
6705 -- MEDIUM A small number of messages are output.
6707 -- HIGH A great number of messages are output, most of them not
6708 -- being useful for the user.
6710 S_Xref_Nostinc : aliased constant S := "/NOSTD_INCLUDES " &
6714 -- Do not look for sources in the system default directory.
6716 S_Xref_Nostlib : aliased constant S := "/NOSTD_LIBRARIES " &
6720 -- Do not look for library files in the system default directory.
6722 S_Xref_Object : aliased constant S := "/OBJECT_SEARCH=*" &
6724 -- /OBJECT_SEARCH=(directory,...)
6726 -- When searching for library and object files, look in the specified
6727 -- directories. The order in which library files are searched is the same
6730 S_Xref_Project : aliased constant S := "/PROJECT=@" &
6734 -- Specify a project file to use. By default, FIND and XREF will try to
6735 -- locate a project file in the current directory.
6737 -- If a project file is either specified or found by the tools, then the
6738 -- content of the source directory and object directory lines are added
6739 -- as if they had been specified respectively by /SOURCE_SEARCH and
6742 S_Xref_Prj : aliased constant S := "/PROJECT_FILE=<" &
6744 -- /PROJECT_FILE=filename
6746 -- Specifies the main project file to be used. The project files rooted
6747 -- at the main project file will be parsed before doing any processing.
6748 -- The source and object directories to be searched will be communicated
6749 -- to gnatxref through logical names ADA_PRJ_INCLUDE_FILE and
6750 -- ADA_PRJ_OBJECTS_FILE.
6752 S_Xref_Search : aliased constant S := "/SEARCH=*" &
6754 -- /SEARCH=(directory,...)
6757 -- /OBJECT_SEARCH=(directory,...) /SOURCE_SEARCH=(directory,...)
6759 S_Xref_Source : aliased constant S := "/SOURCE_SEARCH=*" &
6761 -- /SOURCE_SEARCH=(directory,...)
6763 -- When looking for source files also look in the specified directories.
6764 -- The order in which source file search is undertaken is the same as for
6767 S_Xref_Subdirs : aliased constant S := "/SUBDIRS=<" &
6771 -- The actual directories (object, exec, library, ...) are subdirectories
6772 -- of the directory specified in the project file. If the subdirectory
6773 -- does not exist, it is created automatically.
6775 S_Xref_Output : aliased constant S := "/UNUSED " &
6777 -- /SOURCE_SEARCH=(directory,...)
6779 -- When looking for source files also look in the specified directories.
6780 -- The order in which source file search is undertaken is the same as for
6783 S_Xref_Tags : aliased constant S := "/TAGS " &
6788 -- Print a 'tags' file for vi.
6790 Xref_Switches : aliased constant Switches :=
6791 (S_Xref_Add 'Access,
6793 S_Xref_Deriv 'Access,
6795 S_Xref_Follow 'Access,
6796 S_Xref_Full 'Access,
6797 S_Xref_Global 'Access,
6798 S_Xref_Mess 'Access,
6799 S_Xref_Nostinc 'Access,
6800 S_Xref_Nostlib 'Access,
6801 S_Xref_Object 'Access,
6802 S_Xref_Project 'Access,
6804 S_Xref_Search 'Access,
6805 S_Xref_Source 'Access,
6806 S_Xref_Subdirs 'Access,
6807 S_Xref_Output 'Access,
6808 S_Xref_Tags 'Access);