gas/testsuite/gas/mips/mips.exp

   1 # Copyright 2012, 2013
   2 # Free Software Foundation, Inc.
   3
   4 # This program is free software; you can redistribute it and/or modify
   5 # it under the terms of the GNU General Public License as published by
   6 # the Free Software Foundation; either version 3 of the License, or
   7 # (at your option) any later version.
   8 #
   9 # This program is distributed in the hope that it will be useful,
  10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12 # GNU General Public License for more details.
  13 #
  14 # You should have received a copy of the GNU General Public License
  15 # along with this program; if not, write to the Free Software
  16 # Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.
  17
  18 #
  19 # Some generic MIPS tests
  20 #
  21
  22 # When adding a new test to this file, try to do the following things:
  23 #
  24 # * If testing assembly and disassembly of code, don't forget to test
  25 # the actual bit encodings of the instructions (using the
  26 # --show-raw-insn flag to objdump).
  27 #
  28 # * Try to run the test for as many architectures as appropriate,
  29 # using the "run_dump_test_arches" or "run_list_test_arches" functions,
  30 # along with the output from a call to "mips_arch_list_matching."
  31 #
  32 # * Be sure to compare the test output before and after your testsuite
  33 # changes, to verify that existing and new tests were run as expected.
  34 # Look for expect ERROR messages in the testsuite .log file to make sure
  35 # the new expect code did not contain errors.
  36
  37 # To add support for a new CPU to this file, add an appropriate entry
  38 # to the sequence of "mips_arch_create" function calls below, and test
  39 # the result.  The new CPU should automatically be used when running
  40 # various tests.  If the new CPU is the default CPU for any tool
  41 # targets, make sure the call to "mips_arch_create" reflects that fact.
  42
  43
  44 # "LOSE" marks information about tests which fail at a particular point
  45 # in time, but which are not XFAILed.  Either they used to pass
  46 # and indicate either regressions or the need to tweak the tests to keep
  47 # up the with code, or they are new tests and it is unknown whether or not
  48 # they should pass as-is for the given object formats.
  49
  50
  51 # The functions below create and manipulate an "architecture data
  52 # array" which contains entries for each MIPS architecture (or CPU)
  53 # known to these tests.  The array contains the following information
  54 # for each architecture, indexed by the name of the architecture
  55 # described by the entry:
  56 #
  57 # displayname: The name of the entry to be used for pretty-printing.
  58 #
  59 # gprsize: The size in bits of General Purpose Registers provided by
  60 # the architecture (must be 32 or 64).
  61 #
  62 # props: A list of text strings which are associated with the
  63 # architecture.  These include the architecture name as well as
  64 # information about what instructions the CPU supports.  When matching
  65 # based on properties, an additional property is added to the normal
  66 # property list, "gpr<gprsize>" so that tests can match CPUs which
  67 # have GPRs of a specific size.  The following properties are most
  68 # useful when matching properties for generic (i.e., not CPU-specific)
  69 # tests:
  70 #
  71 #       mips1, mips2, mips3, mips4, mips5, mips32, mips64
  72 #               The architecture includes the instructions defined
  73 #               by that MIPS ISA.
  74 #
  75 #       fpisa3, fpisa4, fpisa5
  76 #               The architecture includes the floating-point
  77 #               instructions defined by that MIPS ISA.
  78 #
  79 #       gpr_ilocks
  80 #               The architecture interlocks GPRs accesses.  (That is,
  81 #               there are no load delay slots.)
  82 #
  83 #       mips3d  The architecture includes the MIPS-3D ASE.
  84 #
  85 #       ror     The architecture includes hardware rotate instructions.
  86 #
  87 #       gpr32, gpr64
  88 #               The architecture provides 32- or 64-bit General Purpose
  89 #               Registers.
  90 #
  91 #       singlefloat
  92 #               The CPU is 64 bit, but only supports 32 bit FPU.
  93 #
  94 # as_flags: The assembler flags used when assembling tests for this
  95 # architecture.
  96 #
  97 # objdump_flags: The objdump flags used when disassembling tests for
  98 # this architecture.
  99 #
 100 # Most entries in the architecture array will have values in all of
 101 # the fields above.  One entry, "default" represents the default CPU
 102 # based on the target of the assembler being built.  If always has
 103 # empty "as_flags" and "objdump_flags."
 104
 105 # mips_arch_init
 106 #
 107 # This function initializes the architecture data array ("mips_arches")
 108 # to be empty.
 109 proc mips_arch_init {} {
 110     global mips_arches
 111
 112     # Catch because the variable won't be set the first time through.
 113     catch {unset mips_arches}
 114 }
 115
 116 # mips_arch_create ARCH GPRSIZE EXTENDS PROPS AS_FLAGS OBJDUMP_FLAGS \
 117 #                  (optional:) DEFAULT_FOR_TARGETS
 118 #
 119 # This function creates a new entry in the architecture data array,
 120 # for the architecture or CPU named ARCH, and fills in the entry
 121 # according to the rest of the arguments.
 122 #
 123 # The new entry's property list is initialized to contain ARCH, any
 124 # properties specified by PROPS, and the properties associated with
 125 # the entry specified by EXTENDS.  (The new architecture is considered
 126 # to extend the capabilities provided by that architecture.)
 127 #
 128 # If DEFAULT_FOR_TARGETS is specified, it is a list of targets for which
 129 # this architecture is the default architecture.  If "istarget" returns
 130 # true for any of the targets in the list, a "default" entry will be
 131 # added to the architecture array which indicates that ARCH is the default
 132 # architecture.
 133 proc mips_arch_create {arch gprsize extends props as_flags objdump_flags
 134                        {default_for_targets {}}} {
 135     global mips_arches
 136
 137     if { [info exists mips_arches($arch)] } {
 138              error "mips_arch_create: arch \"$arch\" already exists"
 139     }
 140     if { $gprsize != 32 && $gprsize != 64 } {
 141         error "mips_arch_create: invalid GPR size $gprsize"
 142     }
 143
 144     set archdata(displayname) $arch
 145     set archdata(gprsize) $gprsize
 146     set archdata(as_flags) $as_flags
 147     set archdata(objdump_flags) $objdump_flags
 148     set archdata(props) $arch
 149     eval lappend archdata(props) $props
 150     if { [string length $extends] != 0 } {
 151         eval lappend archdata(props) [mips_arch_properties $extends 0]
 152     }
 153
 154     set mips_arches($arch) [array get archdata]
 155
 156     # Set as default if appropriate.
 157     foreach target $default_for_targets {
 158         if { [istarget $target] } {
 159             if { [info exists mips_arches(default)] } {
 160                 error "mips_arch_create: default arch already exists"
 161             }
 162
 163             set archdata(displayname) "default = $arch"
 164             set archdata(as_flags) ""
 165             set archdata(objdump_flags) ""
 166
 167             set mips_arches(default) [array get archdata]
 168             break
 169         }
 170     }
 171 }
 172
 173 # mips_arch_destroy ARCH
 174 #
 175 # The opposite of the above.  This function removes an entry from
 176 # the architecture data array, for the architecture or CPU named ARCH.
 177
 178 proc mips_arch_destroy {arch} {
 179     global mips_arches
 180
 181     if { [info exists mips_arches($arch)] } {
 182         unset mips_arches($arch)
 183     }
 184 }
 185
 186 # mips_arch_list_all
 187 #
 188 # This function returns the list of all names of entries in the
 189 # architecture data array (including the default entry, if a default
 190 # is known).
 191 proc mips_arch_list_all {} {
 192     global mips_arches
 193     return [lsort -dictionary [array names mips_arches]]
 194 }
 195
 196 # mips_arch_data ARCH
 197 #
 198 # This function returns the information associated with ARCH
 199 # in the architecture data array, in "array get" form.
 200 proc mips_arch_data {arch} {
 201     global mips_arches
 202
 203     if { ! [info exists mips_arches($arch)] } {
 204         error "mips_arch_data: unknown arch \"$arch\""
 205     }
 206     return $mips_arches($arch)
 207 }
 208
 209 # mips_arch_displayname ARCH
 210 #
 211 # This function returns the printable name associated with ARCH in
 212 # the architecture data array.
 213 proc mips_arch_displayname {arch} {
 214     array set archdata [mips_arch_data $arch]
 215     return $archdata(displayname)
 216 }
 217
 218 # mips_arch_properties ARCH (optional:) INCLUDE_GPRSIZE
 219 #
 220 # This function returns the property list associated with ARCH in the
 221 # architecture data array, including the "canonical" target name as the
 222 # first element.
 223 #
 224 # If INCLUDE_GPRSIZE is non-zero, an additional "gpr32" or "gpr64"
 225 # property will be returned as part of the list based on the
 226 # architecture's GPR size.
 227 proc mips_arch_properties {arch {include_gprsize 1}} {
 228     array set archdata [mips_arch_data $arch]
 229     set props $archdata(props)
 230     if { $include_gprsize } {
 231         lappend props gpr$archdata(gprsize)
 232     }
 233     return $props
 234 }
 235
 236 # mips_arch_as_flags ARCH
 237 #
 238 # This function returns the assembler flags associated with ARCH in
 239 # the architecture data array.
 240 proc mips_arch_as_flags {arch} {
 241     array set archdata [mips_arch_data $arch]
 242     return $archdata(as_flags)
 243 }
 244
 245 # mips_arch_objdump_flags ARCH
 246 #
 247 # This function returns the objdump disassembly flags associated with
 248 # ARCH in the architecture data array.
 249 proc mips_arch_objdump_flags {arch} {
 250     array set archdata [mips_arch_data $arch]
 251     return $archdata(objdump_flags)
 252 }
 253
 254 # mips_arch_matches ARCH PROPMATCHLIST
 255 #
 256 # This function returns non-zero if ARCH matches the set of properties
 257 # described by PROPMATCHLIST.  Each entry in PROPMATCHLIST can either
 258 # be the name of a property which must be matched, or "!" followed by
 259 # the name of a property which must not be matched.  ARCH matches
 260 # PROPMATCHLIST if and only if all of the conditions specified by
 261 # PROPMATCHLIST are satisfied.
 262 proc mips_arch_matches {arch propmatchlist} {
 263     foreach pm $propmatchlist {
 264         if { [string match {!*} $pm] } {
 265             # fail if present.
 266             set inverted 1
 267             set p [string range $pm 1 end]
 268         } {
 269             # fail if not present.
 270             set inverted 0
 271             set p $pm
 272         }
 273
 274         set loc [lsearch -exact [mips_arch_properties $arch] $p]
 275
 276         # required-absent and found, or required-present and not found: fail.
 277         if { ($inverted && $loc != -1) || (! $inverted && $loc == -1) } {
 278             return 0
 279         }
 280     }
 281     return 1
 282 }
 283
 284 # mips_arch_list_matching ARGS
 285 #
 286 # This function returns a list of all architectures which match
 287 # the conditions described by its arguments.  Its arguments are
 288 # taken as a list and used as the PROPMATCHLIST in a call to
 289 # "mips_arch_matches" for each known architecture.
 290 proc mips_arch_list_matching {args} {
 291     set l ""
 292     foreach arch [mips_arch_list_all] {
 293         # For now, don't match default arch until we know what its
 294         # properties actually are.
 295         if { [string compare $arch default] == 0
 296              && [string length [mips_arch_properties default]] == 0} {
 297             continue
 298         }
 299         if { [mips_arch_matches $arch $args] } {
 300             lappend l $arch
 301         }
 302     }
 303     return $l
 304 }
 305
 306
 307 # The functions below facilitate running various types of tests.
 308
 309 # run_dump_test_arch NAME OPTS ARCH
 310 #
 311 # Invoke "run_dump_test" for test NAME with additional assembler options OPTS.
 312 # Add the assembler and disassembler flags that are associated with
 313 # architecture ARCH.
 314 #
 315 # You can override the expected output for particular architectures
 316 # and file formats.  The possible test names are, in order of preference:
 317 #
 318 # 1. CARCH@FORMAT@NAME.d
 319 # 2. CARCH@NAME.d
 320 # 3. FORMAT@NAME.d
 321 # 4. NAME.d
 322 #
 323 # where CARCH is the "canonical" name of architecture ARCH as recorded
 324 # in its associated property list, and where FORMAT is the target's
 325 # file format (one of "elf", "ecoff" or "aout").
 326 proc run_dump_test_arch { name opts arch } {
 327     upvar elf elf ecoff ecoff aout aout
 328     global subdir srcdir
 329
 330     set format [expr { $elf ? "elf" : $ecoff ? "ecoff" : "aout" }]
 331     set proparch [lindex [mips_arch_properties $arch 0] 0]
 332     set prefixes [list ${proparch}@${format}@ ${proparch}@ ]
 333     if { [ string match "octeon*" $proparch ] && $proparch != "octeon" } {
 334       lappend prefixes octeon@
 335       lappend prefixes octeon@${format}@
 336     }
 337     lappend prefixes ${format}@
 338     foreach prefix ${prefixes} {
 339         set archname ${prefix}${name}
 340         if { [file exists "$srcdir/$subdir/${archname}.d"] } {
 341             set name $archname
 342             break
 343         }
 344     }
 345
 346     if [catch {run_dump_test $name \
 347                    "{name    {([concat $opts [mips_arch_displayname $arch]])}}
 348                     {objdump {[mips_arch_objdump_flags $arch]}}
 349                     {as      {[concat $opts [mips_arch_as_flags $arch]]}}"} rv] {
 350         perror "$rv"
 351         untested "$subdir/$name ($arch)"
 352     }
 353 }
 354
 355 # run_dump_test_arches NAME [OPTS] ARCH_LIST
 356 #
 357 # Invoke "run_dump_test_arch" for test NAME, for each architecture
 358 # listed in ARCH_LIST.  OPTS, if specified, is a list of additional
 359 # assembler options that should be used for all architectures.
 360 proc run_dump_test_arches { name args } {
 361     upvar elf elf ecoff ecoff aout aout
 362     set opts ""
 363     if { [llength $args] > 1 } {
 364         set opts [lindex $args 0]
 365         set args [lrange $args 1 end]
 366     }
 367     set arch_list [lindex $args 0]
 368     foreach arch $arch_list {
 369         run_dump_test_arch $name $opts $arch
 370     }
 371 }
 372
 373 # run_list_test_arch NAME OPTS ARCH
 374 #
 375 # Invoke "run_list_test" for test NAME with additional assembler options OPTS.
 376 # Add the assembler flags that are associated with architecture ARCH.
 377 proc run_list_test_arch { name opts arch } {
 378     global subdir
 379
 380     set testname "MIPS $name ([concat $opts [mips_arch_displayname $arch]])"
 381     if [catch {run_list_test \
 382                    $name \
 383                    [concat $opts [mips_arch_as_flags $arch]] \
 384                    $testname} rv] {
 385         perror "$rv"
 386         untested "$testname"
 387     }
 388 }
 389
 390 # run_list_test_arches NAME [OPTS] ARCH_LIST
 391 #
 392 # Invoke "run_list_test_arch" for test NAME, for each architecture listed
 393 # in ARCH_LIST.  OPTS, if specified, is a list of additional assembler
 394 # options that should be used for all architectures.
 395 proc run_list_test_arches { name args } {
 396     set opts ""
 397     if { [llength $args] > 1 } {
 398         set opts [lindex $args 0]
 399         set args [lrange $args 1 end]
 400     }
 401     set arch_list [lindex $args 0]
 402     foreach arch $arch_list {
 403         run_list_test_arch "$name" "$opts" "$arch"
 404     }
 405 }
 406
 407
 408 # Create the architecture data array by providing data for all
 409 # known architectures.
 410 #
 411 # Note that several targets pick default CPU based on ABI.  We
 412 # can't easily handle that; do NOT list those targets as defaulting
 413 # to any architecture.
 414 mips_arch_init
 415 mips_arch_create mips1  32      {}      {} \
 416                         { -march=mips1 -mtune=mips1 } { -mmips:3000 }
 417 mips_arch_create mips2  32      mips1   { gpr_ilocks } \
 418                         { -march=mips2 -mtune=mips2 } { -mmips:6000 }
 419 mips_arch_create mips3  64      mips2   { fpisa3 } \
 420                         { -march=mips3 -mtune=mips3 } { -mmips:4000 }
 421 mips_arch_create mips4  64      mips3   { fpisa4 } \
 422                         { -march=mips4 -mtune=mips4 } { -mmips:8000 }
 423 mips_arch_create mips5  64      mips4   { fpisa5 } \
 424                         { -march=mips5 -mtune=mips5 } { -mmips:mips5 }
 425 mips_arch_create mips32 32      mips2   {} \
 426                         { -march=mips32 -mtune=mips32 } { -mmips:isa32 } \
 427                         { mipsisa32-*-* mipsisa32el-*-* }
 428 mips_arch_create mips32r2 32    mips32  { fpisa3 fpisa4 fpisa5 ror } \
 429                         { -march=mips32r2 -mtune=mips32r2 } \
 430                         { -mmips:isa32r2 } \
 431                         { mipsisa32r2-*-* mipsisa32r2el-*-* }
 432 mips_arch_create mips64 64      mips5   { mips32 } \
 433                         { -march=mips64 -mtune=mips64 } { -mmips:isa64 } \
 434                         { mipsisa64-*-* mipsisa64el-*-* }
 435 mips_arch_create mips64r2 64    mips64  { mips32r2 ror } \
 436                         { -march=mips64r2 -mtune=mips64r2 } \
 437                         { -mmips:isa64r2 } \
 438                         { mipsisa64r2-*-* mipsisa64r2el-*-* }
 439 mips_arch_create mips16 32      {}      {} \
 440                         { -march=mips1 -mips16 } { -mmips:16 }
 441 mips_arch_create micromips 64   mips64r2 {} \
 442                         { -march=mips64 -mmicromips } {}
 443 mips_arch_create r3000  32      mips1   {} \
 444                         { -march=r3000 -mtune=r3000 } { -mmips:3000 }
 445 mips_arch_create r3900  32      mips1   { gpr_ilocks } \
 446                         { -march=r3900 -mtune=r3900 } { -mmips:3900 } \
 447                         { mipstx39-*-* mipstx39el-*-* }
 448 mips_arch_create r4000  64      mips3   {} \
 449                         { -march=r4000 -mtune=r4000 } { -mmips:4000 }
 450 mips_arch_create vr5400 64      mips4   { ror } \
 451                         { -march=vr5400 -mtune=vr5400 } { -mmips:5400 }
 452 mips_arch_create sb1    64      mips64  { mips3d } \
 453                         { -march=sb1 -mtune=sb1 } { -mmips:sb1 } \
 454                         { mipsisa64sb1-*-* mipsisa64sb1el-*-* }
 455 mips_arch_create octeon 64      mips64r2 {} \
 456                         { -march=octeon -mtune=octeon } { -mmips:octeon } \
 457                         { mips64octeon*-*-* }
 458 mips_arch_create octeonp 64     octeon {} \
 459                         { -march=octeon+ -mtune=octeon+ } { -mmips:octeon+ } \
 460                         { }
 461 mips_arch_create octeon2 64     octeonp {} \
 462                         { -march=octeon2 -mtune=octeon2 } { -mmips:octeon2 } \
 463                         { }
 464 mips_arch_create xlr    64      mips64  {} \
 465                         { -march=xlr -mtune=xlr } { -mmips:xlr }
 466 mips_arch_create r5900  64      mips3   { gpr_ilocks singlefloat } \
 467                         { -march=r5900 -mtune=r5900 } { -mmips:5900 } \
 468                         { mipsr5900el-*-* mips64r5900el-*-* }
 469
 470 #
 471 # And now begin the actual tests!  VxWorks uses RELA rather than REL
 472 # relocations, so most of the generic dump tests will not work there.
 473 #
 474 if { [istarget mips*-*-vxworks*] } {
 475     run_dump_test "vxworks1"
 476     run_dump_test "vxworks1-xgot"
 477     run_dump_test "vxworks1-el"
 478     run_dump_test "vxworks1-xgot-el"
 479 } elseif { [istarget mips*-*-*] } {
 480     set elf [expr [istarget *-*-elf*] || [istarget *-*-irix5*] || [istarget *-*-irix6* ] || [istarget *-*-linux*] || [istarget *-*-netbsd*] ]
 481     set ecoff [expr [istarget *-*-ecoff*] || [istarget *-*-ultrix*] || [istarget *-*-irix\[1-4\]*] ]
 482     set aout [expr [istarget *-*-bsd*] || [istarget *-*-openbsd*] ]
 483     set addr32 [expr [istarget mipstx39*-*-*] || [istarget mips-*-linux*] || [istarget mipsel-*-linux*] || [istarget mips*-*-ecoff]]
 484     set has_newabi [expr [istarget *-*-irix6*] || [istarget mips*-*-linux*] || [istarget mips*-sde-elf*]]
 485     set no_mips16 [expr !$elf]
 486     set no_micromips [expr !$elf]
 487
 488     if { [istarget "mips*-*-*linux*"] || [istarget "mips*-sde-elf*"] } then {
 489         set tmips "t"
 490     } else {
 491         set tmips ""
 492     }
 493     if [istarget mips*el-*-*] {
 494         set el "el"
 495     } {
 496         set el ""
 497     }
 498     if { $no_mips16 } {
 499         mips_arch_destroy mips16
 500     }
 501     if { $no_micromips } {
 502         mips_arch_destroy micromips
 503     }
 504
 505     run_dump_test_arches "dot-1"        [mips_arch_list_matching mips1]
 506     run_dump_test_arches "abs"          [mips_arch_list_matching mips1]
 507     run_dump_test_arches "add"          [mips_arch_list_matching mips1]
 508     run_dump_test_arches "and"          [mips_arch_list_matching mips1]
 509     run_dump_test_arches "mips1-fp"     [mips_arch_list_matching mips1]
 510     run_list_test_arches "mips1-fp" "-32 -msoft-float" \
 511                                         [mips_arch_list_matching mips1]
 512     run_dump_test "break20"
 513     run_dump_test "trap20"
 514
 515     # LOSE: As of 2002-02-08, "beq" through "bltu" fail for target mips-ecoff.
 516     # See http://sources.redhat.com/ml/binutils/2001-10/msg00418.html for
 517     # more information.  Not sure if the fixes there are correct; should
 518     # branches to external labels be allowed for ECOFF?
 519     run_dump_test_arches "beq"          [mips_arch_list_matching mips1]
 520     run_dump_test_arches "bge"          [mips_arch_list_matching mips1]
 521     run_dump_test_arches "bgeu"         [mips_arch_list_matching mips1]
 522     run_dump_test_arches "blt"          [mips_arch_list_matching mips1]
 523     run_dump_test_arches "bltu"         [mips_arch_list_matching mips1]
 524     run_dump_test_arches "branch-likely" [mips_arch_list_matching mips2]
 525     run_dump_test_arches "branch-misc-1" [mips_arch_list_matching mips1]
 526     run_dump_test_arches "branch-misc-2" [mips_arch_list_matching mips1]
 527     run_dump_test_arches "branch-misc-2pic" [mips_arch_list_matching mips1]
 528     run_dump_test_arches "branch-misc-2-64" [mips_arch_list_matching mips3]
 529     run_dump_test_arches "branch-misc-2pic-64" [mips_arch_list_matching mips3]
 530     run_dump_test "branch-misc-3"
 531     run_dump_test "branch-swap"
 532
 533     if $elf {
 534         # Sweep a range of branch offsets so that it hits a position where
 535         # it is at the beginning of a frag and then swapped with a 16-bit
 536         # instruction from the preceding frag.  The offset will be somewhere
 537         # close below 4096 as this is the default obstack size limit that
 538         # we use and some space will have been already consumed.  The exact
 539         # amount depends on the host's programming model.
 540         for { set count 960 } { $count <= 1024 } { incr count } {
 541             run_list_test "branch-swap-2" "--defsym count=$count" \
 542                 "MIPS branch swapping ($count)"
 543         }
 544     }
 545
 546     run_dump_test "div"
 547
 548     if { !$addr32 } {
 549         run_dump_test_arches "dli"              [mips_arch_list_matching mips3]
 550     }
 551     if $elf {
 552         run_dump_test_arches "elf-jal"  [mips_arch_list_matching mips1]
 553     } else {
 554         run_dump_test "jal"
 555     }
 556     run_dump_test_arches "jal-mask-11"  [mips_arch_list_matching mips1]
 557     run_dump_test_arches "jal-mask-12"  [mips_arch_list_matching mips1]
 558     run_dump_test_arches "jal-mask-21"  [mips_arch_list_matching micromips]
 559     run_dump_test_arches "jal-mask-22"  [mips_arch_list_matching micromips]
 560     run_dump_test "eret-1"
 561     run_dump_test "eret-2"
 562     run_dump_test "eret-3"
 563     run_dump_test_arches "24k-branch-delay-1" \
 564                                         [mips_arch_list_matching mips1]
 565     run_dump_test_arches "24k-triple-stores-1" \
 566                                 [mips_arch_list_matching fpisa5 !octeon]
 567     run_dump_test_arches "24k-triple-stores-2" \
 568                                         [mips_arch_list_matching mips2]
 569     run_dump_test_arches "24k-triple-stores-3" \
 570                                         [mips_arch_list_matching mips2]
 571     run_dump_test_arches "24k-triple-stores-4" \
 572                                         [mips_arch_list_matching mips2 !singlefloat]
 573     run_dump_test_arches "24k-triple-stores-5" \
 574                                         [mips_arch_list_matching mips1]
 575     run_dump_test_arches "24k-triple-stores-6" \
 576                                         [mips_arch_list_matching mips2 !singlefloat]
 577     run_dump_test_arches "24k-triple-stores-7" \
 578                                         [mips_arch_list_matching mips2 !singlefloat]
 579     run_dump_test_arches "24k-triple-stores-8" \
 580                                         [mips_arch_list_matching mips1]
 581     run_dump_test_arches "24k-triple-stores-9" \
 582                                         [mips_arch_list_matching mips1]
 583     run_dump_test_arches "24k-triple-stores-10" \
 584                                         [mips_arch_list_matching mips1]
 585     if $elf {
 586         run_dump_test_arches "24k-triple-stores-11" \
 587                                         [mips_arch_list_matching mips1]
 588     }
 589
 590     if $elf {
 591         run_dump_test_arches "jal-svr4pic" \
 592                                         [mips_arch_list_matching mips1]
 593         run_dump_test_arches "jal-svr4pic-noreorder" \
 594                                         [mips_arch_list_matching mips1]
 595     }
 596     if $elf { run_dump_test "jal-xgot" }
 597     run_list_test_arches "jal-range" "-32" [mips_arch_list_matching mips1]
 598     if $has_newabi { run_dump_test "jal-newabi" }
 599     if !$aout { run_dump_test "la" }
 600     if $elf { run_dump_test "la-svr4pic" }
 601     if $elf { run_dump_test "la-xgot" }
 602     if $elf { run_dump_test "lca-svr4pic" }
 603     if $elf { run_dump_test "lca-xgot" }
 604     if !$aout {
 605         # XXX FIXME: Has mips2 and later insns with mips1 disassemblies.
 606         # (Should split and then use appropriate arch lists.)
 607         run_dump_test_arches "lb"       [mips_arch_list_matching mips1 !mips2]
 608     }
 609     if $elf {
 610         run_dump_test_arches "lb-svr4pic" \
 611                                 [mips_arch_list_matching mips1 !gpr_ilocks]
 612         run_dump_test_arches "lb-svr4pic-ilocks" [mips_arch_list_matching gpr_ilocks]
 613     }
 614     if $elf {
 615         # Both versions specify the cpu, so we can run both regardless of
 616         # the interlocking in the configured default cpu.
 617         run_dump_test "lb-xgot"
 618         run_dump_test "lb-xgot-ilocks"
 619     }
 620     if !$aout {
 621         run_dump_test_arches "ld"       [mips_arch_list_matching mips1]
 622         run_dump_test_arches "ld-forward" \
 623                                         [mips_arch_list_matching mips1]
 624         run_dump_test_arches "sd"       [mips_arch_list_matching mips1]
 625         run_dump_test_arches "sd-forward" \
 626                                         [mips_arch_list_matching mips1]
 627         run_dump_test_arches "l_d"      [mips_arch_list_matching mips1 !singlefloat]
 628         run_dump_test_arches "l_d-forward" \
 629                                         [mips_arch_list_matching mips1 !singlefloat]
 630         run_dump_test_arches "s_d"      [mips_arch_list_matching mips1 !singlefloat]
 631         run_dump_test_arches "s_d-forward" \
 632                                         [mips_arch_list_matching mips1 !singlefloat]
 633         run_dump_test_arches "ldc1"     [mips_arch_list_matching mips2 !singlefloat]
 634         run_dump_test_arches "ldc1-forward" \
 635                                         [mips_arch_list_matching mips2 !singlefloat]
 636         run_dump_test_arches "sdc1"     [mips_arch_list_matching mips2 !singlefloat]
 637         run_dump_test_arches "sdc1-forward" \
 638                                         [mips_arch_list_matching mips2 !singlefloat]
 639         if $has_newabi {
 640             run_dump_test_arches "ld-n32" \
 641                                         [mips_arch_list_matching mips3]
 642             run_dump_test_arches "ld-forward-n32" \
 643                                         [mips_arch_list_matching mips3]
 644             run_dump_test_arches "sd-n32" \
 645                                         [mips_arch_list_matching mips3]
 646             run_dump_test_arches "sd-forward-n32" \
 647                                         [mips_arch_list_matching mips3]
 648             run_dump_test_arches "l_d-n32" \
 649                                         [mips_arch_list_matching mips3 !singlefloat]
 650             run_dump_test_arches "l_d-forward-n32" \
 651                                         [mips_arch_list_matching mips3 !singlefloat]
 652             run_dump_test_arches "s_d-n32" \
 653                                         [mips_arch_list_matching mips3 !singlefloat]
 654             run_dump_test_arches "s_d-forward-n32" \
 655                                         [mips_arch_list_matching mips3 !singlefloat]
 656             run_dump_test_arches "ldc1-n32" \
 657                                         [mips_arch_list_matching mips3 !singlefloat]
 658             run_dump_test_arches "ldc1-forward-n32" \
 659                                         [mips_arch_list_matching mips3 !singlefloat]
 660             run_dump_test_arches "sdc1-n32" \
 661                                         [mips_arch_list_matching mips3 !singlefloat]
 662             run_dump_test_arches "sdc1-forward-n32" \
 663                                         [mips_arch_list_matching mips3 !singlefloat]
 664             run_dump_test_arches "ld-n64" \
 665                                         [mips_arch_list_matching mips3]
 666             run_dump_test_arches "ld-forward-n64" \
 667                                         [mips_arch_list_matching mips3]
 668             run_dump_test_arches "sd-n64" \
 669                                         [mips_arch_list_matching mips3]
 670             run_dump_test_arches "sd-forward-n64" \
 671                                         [mips_arch_list_matching mips3]
 672             run_dump_test_arches "l_d-n64" \
 673                                         [mips_arch_list_matching mips3 !singlefloat]
 674             run_dump_test_arches "l_d-forward-n64" \
 675                                         [mips_arch_list_matching mips3 !singlefloat]
 676             run_dump_test_arches "s_d-n64" \
 677                                         [mips_arch_list_matching mips3 !singlefloat]
 678             run_dump_test_arches "s_d-forward-n64" \
 679                                         [mips_arch_list_matching mips3 !singlefloat]
 680             run_dump_test_arches "ldc1-n64" \
 681                                         [mips_arch_list_matching mips3 !singlefloat]
 682             run_dump_test_arches "ldc1-forward-n64" \
 683                                         [mips_arch_list_matching mips3 !singlefloat]
 684             run_dump_test_arches "sdc1-n64" \
 685                                         [mips_arch_list_matching mips3 !singlefloat]
 686             run_dump_test_arches "sdc1-forward-n64" \
 687                                         [mips_arch_list_matching mips3 !singlefloat]
 688         }
 689     }
 690     if $elf { run_dump_test "ld-svr4pic" }
 691     if $elf { run_dump_test "ld-xgot" }
 692     run_dump_test_arches "li"           [mips_arch_list_matching mips1]
 693     if !$aout { run_dump_test "lifloat" }
 694     if $elf { run_dump_test "lif-svr4pic" }
 695     if $elf { run_dump_test "lif-xgot" }
 696     run_dump_test_arches "mips4"        [mips_arch_list_matching mips4]
 697     run_dump_test_arches "mips4-fp" "-32" \
 698                                         [mips_arch_list_matching fpisa4]
 699     run_dump_test_arches "mips4-fp" "-mabi=o64" \
 700                                         [mips_arch_list_matching fpisa4 gpr64]
 701     run_list_test_arches "mips4-fp" "-32 -msoft-float" \
 702                                         [mips_arch_list_matching fpisa4]
 703     run_dump_test_arches "mips4-branch-likely" \
 704                                         [mips_arch_list_matching mips4]
 705     run_list_test_arches "mips4-branch-likely" "-32 -msoft-float" \
 706                                         [mips_arch_list_matching mips4]
 707     run_dump_test_arches "mips5-fp" "-32" \
 708                                         [mips_arch_list_matching fpisa5]
 709     run_dump_test_arches "mips5-fp" "-mabi=o64" \
 710                                         [mips_arch_list_matching fpisa5 gpr64]
 711     run_dump_test "mul"
 712
 713     run_dump_test_arches "rol"          [mips_arch_list_matching mips1 !ror]
 714     run_dump_test_arches "rol-hw"       [mips_arch_list_matching ror]
 715
 716     run_dump_test_arches "rol64"        [mips_arch_list_matching gpr64 !ror]
 717     run_dump_test_arches "rol64-hw"     [mips_arch_list_matching gpr64 ror]
 718
 719     if !$aout { run_dump_test "sb" }
 720     run_dump_test "trunc"
 721     if !$aout { run_dump_test "ulh" }
 722     run_dump_test_arches "ulh2-eb"      [mips_arch_list_matching mips1]
 723     run_dump_test_arches "ulh2-el"      [mips_arch_list_matching mips1]
 724     if $elf { run_dump_test "ulh-svr4pic" }
 725     if $elf { run_dump_test "ulh-xgot" }
 726     if !$aout {
 727         run_dump_test "ulw"
 728         run_dump_test "uld"
 729         run_dump_test "ush"
 730         run_dump_test "usw"
 731         run_dump_test "usd"
 732     }
 733     run_dump_test_arches "ulw2-eb" \
 734                                 [mips_arch_list_matching mips1 !gpr_ilocks]
 735     run_dump_test_arches "ulw2-eb-ilocks" [mips_arch_list_matching gpr_ilocks]
 736     run_dump_test_arches "ulw2-el" \
 737                                 [mips_arch_list_matching mips1 !gpr_ilocks]
 738     run_dump_test_arches "ulw2-el-ilocks" [mips_arch_list_matching gpr_ilocks]
 739
 740     run_dump_test_arches "uld2-eb" [mips_arch_list_matching mips3]
 741     run_dump_test_arches "uld2-el" [mips_arch_list_matching mips3]
 742
 743     # The mips16 test can only be run on ELF, because only ELF
 744     # supports the necessary mips16 reloc.
 745     if { $elf && !$no_mips16 } {
 746         run_dump_test "mips16"
 747         run_dump_test "mips16-64"
 748         # Check MIPS16e extensions
 749         run_dump_test_arches "mips16e" \
 750                                 [mips_arch_list_matching mips32 !micromips]
 751         # Check jalx handling
 752         run_dump_test "mips16-jalx"
 753         run_dump_test "mips-jalx"
 754         run_dump_test "mips-jalx-2"
 755         # Check MIPS16 HI16/LO16 relocations
 756         run_dump_test "mips16-hilo"
 757         if $has_newabi {
 758             run_dump_test "mips16-hilo-n32"
 759         }
 760         run_dump_test "mips16-hilo-match"
 761     }
 762     run_dump_test "delay"
 763     run_dump_test "nodelay"
 764     run_dump_test "mips4010"
 765     run_dump_test "mips4650"
 766     run_dump_test "mips4100"
 767     run_dump_test "vr4111"
 768     run_dump_test "vr4120"
 769     run_dump_test "vr4120-2"
 770     run_dump_test "vr4130"
 771     run_dump_test "vr5400"
 772     run_dump_test "vr5500"
 773     run_dump_test "rm7000"
 774     run_dump_test "perfcount"
 775     run_dump_test "lineno"
 776     run_dump_test "sync"
 777
 778     run_dump_test_arches "mips32"       [mips_arch_list_matching mips32]
 779     run_dump_test_arches "mips32-imm"   [mips_arch_list_matching mips32]
 780
 781     run_dump_test_arches "mips32-sf32"  [mips_arch_list_matching mips32]
 782     run_list_test_arches "mips32-sf32" "-32 -msoft-float" \
 783                                         [mips_arch_list_matching mips32]
 784     run_dump_test_arches "mips32-cp2"   [mips_arch_list_matching mips32 \
 785                                             !octeon]
 786
 787     run_dump_test_arches "mips32r2"     [mips_arch_list_matching mips32r2]
 788     run_dump_test_arches "mips32r2-cp2" [mips_arch_list_matching mips32r2 \
 789                                             !octeon]
 790     run_dump_test_arches "mips32r2-fp32" \
 791                                         [mips_arch_list_matching mips32r2]
 792     run_list_test_arches "mips32r2-fp32" "-32 -msoft-float" \
 793                                         [mips_arch_list_matching mips32r2]
 794     run_list_test_arches "mips32r2-ill" "-32" \
 795                         [mips_arch_list_matching mips32r2 gpr32]
 796     run_list_test_arches "mips32r2-ill-fp64" "-mabi=o64" \
 797                         [mips_arch_list_matching mips32r2 gpr64]
 798     run_list_test_arches "mips32r2-ill-nofp" "-32 -msoft-float" \
 799                         [mips_arch_list_matching mips32r2]
 800
 801     run_dump_test_arches "mips64"       [mips_arch_list_matching mips64]
 802     run_dump_test_arches "mips64-cp2"   [mips_arch_list_matching mips64 \
 803                                             !octeon]
 804
 805     run_dump_test_arches "mips64r2"     [mips_arch_list_matching mips64r2]
 806     run_list_test_arches "mips64r2-ill" [mips_arch_list_matching mips64r2]
 807
 808     run_dump_test "set-arch"
 809
 810     if { !$addr32 } {
 811         run_dump_test "mips64-mips3d"
 812         run_dump_test_arches "mips64-mips3d-incl" [mips_arch_list_matching mips3d]
 813
 814         run_dump_test "mips64-mdmx"
 815         run_dump_test "sb1-ext-mdmx"
 816         run_dump_test "sb1-ext-ps"
 817         run_dump_test "xlr-ext"
 818     }
 819
 820     run_dump_test_arches "relax"        [mips_arch_list_matching mips2]
 821     run_dump_test_arches "relax-at"     [mips_arch_list_matching mips2]
 822     run_dump_test "relax-swap1-mips1"
 823     run_dump_test "relax-swap1-mips2"
 824     run_dump_test "relax-swap2"
 825     run_dump_test_arches "relax-swap3"  [mips_arch_list_all]
 826     run_list_test_arches "relax-bposge" "-mdsp -relax-branch" \
 827                                         [mips_arch_list_matching mips64r2 \
 828                                             !micromips]
 829
 830     run_list_test "illegal" "-32"
 831     run_list_test "baddata1" "-32"
 832     run_list_test "jalr" ""
 833
 834     # LOSE: As of 2002-02-08, the next 4 tests fail for target mips-ecoff.
 835     # It's unknown whether they _should_ pass as-is, or whether different
 836     # variants are needed for ELF and ECOFF.
 837     run_dump_test "mips-gp32-fp32"
 838     run_dump_test "mips-gp32-fp64"
 839     run_dump_test "mips-gp64-fp32"
 840     run_dump_test "mips-gp64-fp64"
 841
 842     if $elf {
 843         # Make sure that -mcpu=FOO and -mFOO are equivalent.  Assemble a file
 844         # containing 4650-specific instructions with -m4650 and -mcpu=4650,
 845         # and verify that they're the same.  Specifically, we're checking
 846         # that the EF_MIPS_MACH field is set, and that the 4650 'mul'
 847         # instruction does get used.  In previous versions of GAS,
 848         # only -mcpu=4650 would set the EF_MIPS_MACH field; -m4650 wouldn't.
 849         run_dump_test "elf_e_flags1"
 850         run_dump_test "elf_e_flags2"
 851         run_dump_test "elf_e_flags3"
 852         run_dump_test "elf_e_flags4"
 853
 854         # Check EF_MIPS_ARCH markings for each supported architecture.
 855         run_dump_test "elf_arch_mips1"
 856         run_dump_test "elf_arch_mips2"
 857         run_dump_test "elf_arch_mips3"
 858         run_dump_test "elf_arch_mips4"
 859         run_dump_test "elf_arch_mips5"
 860         run_dump_test "elf_arch_mips32"
 861         run_dump_test "elf_arch_mips32r2"
 862         run_dump_test "elf_arch_mips64"
 863         run_dump_test "elf_arch_mips64r2"
 864
 865         # Verify that ASE markings are handled properly.
 866         if { !$no_mips16 } {
 867             run_dump_test "elf_ase_mips16"
 868             run_dump_test "elf_ase_mips16-2"
 869         }
 870         if { !$no_micromips } {
 871             run_dump_test "elf_ase_micromips"
 872             run_dump_test "elf_ase_micromips-2"
 873         }
 874
 875         run_dump_test "mips-gp32-fp32-pic"
 876         run_dump_test "mips-gp32-fp64-pic"
 877         run_dump_test "mips-gp64-fp32-pic"
 878         run_dump_test "mips-gp64-fp64-pic"
 879
 880         run_dump_test "mips-abi32"
 881         run_dump_test "mips-abi32-pic"
 882         run_dump_test "mips-abi32-pic2"
 883
 884         run_dump_test "elf${el}-rel"
 885         run_dump_test_arches "elf${el}-rel2" [mips_arch_list_matching gpr64 !singlefloat]
 886         run_dump_test "e32${el}-rel2"
 887         run_dump_test "elf${el}-rel3"
 888         run_dump_test_arches "elf-rel4" [mips_arch_list_matching gpr64]
 889         run_dump_test "e32-rel4"
 890         run_dump_test "elf-rel5"
 891         run_dump_test "elf-rel6"
 892         if $has_newabi {
 893             run_dump_test "elf-rel6-n32"
 894             run_dump_test "elf-rel6-n64"
 895         }
 896         run_dump_test "elf-rel7"
 897         run_dump_test "elf-rel8"
 898         run_dump_test "elf-rel8-mips16"
 899         run_dump_test "elf-rel9"
 900         run_dump_test "elf-rel9-mips16"
 901         if $has_newabi {
 902             run_dump_test "elf-rel10"
 903             run_dump_test "elf-rel11"
 904         }
 905         run_dump_test "elf-rel12"
 906         run_dump_test "elf-rel13"
 907         run_dump_test "elf-rel13-mips16"
 908         run_dump_test "elf-rel14"
 909
 910         if $has_newabi {
 911             run_dump_test "elf-rel15"
 912             run_dump_test "elf-rel16"
 913
 914             run_dump_test "elf-rel-got-n32"
 915             run_dump_test "elf-rel-xgot-n32"
 916             run_dump_test "elf-rel-got-n64"
 917             run_dump_test "elf-rel-xgot-n64"
 918         }
 919         run_dump_test "elf-rel17"
 920         if $has_newabi {
 921             run_dump_test "elf-rel18"
 922         }
 923         run_dump_test "elf-rel19"
 924         run_dump_test "elf-rel20"
 925         if $has_newabi {
 926             run_dump_test "elf-rel21"
 927             run_dump_test "elf-rel22"
 928             run_dump_test "elf-rel23"
 929             run_dump_test "elf-rel23a"
 930             run_dump_test "elf-rel23b"
 931             run_dump_test "elf-rel24"
 932         }
 933
 934         run_dump_test "elf-rel25"
 935         run_dump_test "elf-rel25a"
 936         run_dump_test "elf-rel26"
 937
 938         run_dump_test_arches "elf-rel27" [mips_arch_list_all]
 939
 940         if $has_newabi {
 941             run_dump_test "elf-rel28-n32"
 942             run_dump_test "elf-rel28-n64"
 943             run_dump_test_arches "elf-rel29" [mips_arch_list_matching mips3]
 944         }
 945         run_list_test_arches "elf-rel30" "-32" [mips_arch_list_all]
 946
 947         if { !$no_mips16 } {
 948             run_dump_test "${tmips}mips${el}16-e"
 949             run_dump_test "${tmips}mips${el}16-f"
 950         }
 951         run_dump_test "elf-consthilo"
 952         run_dump_test "expr1"
 953
 954         run_list_test "tls-ill" "-32"
 955         run_dump_test "tls-o32"
 956         run_dump_test "tls-relw"
 957         run_dump_test "jalr2"
 958
 959         run_dump_test_arches "aent"     [mips_arch_list_matching mips1]
 960
 961         run_dump_test_arches "branch-misc-4" \
 962                                         [mips_arch_list_matching mips1]
 963         run_dump_test_arches "branch-misc-4-64" \
 964                                         [mips_arch_list_matching mips3]
 965
 966         run_dump_test_arches "loc-swap" [mips_arch_list_all]
 967         run_dump_test_arches "loc-swap-dis" \
 968                                         [mips_arch_list_all]
 969         run_dump_test_arches "loc-swap-2" [mips_arch_list_all]
 970     }
 971
 972     if $has_newabi {
 973         run_dump_test "n32-consec"
 974     }
 975
 976     # tests of objdump's ability to disassemble using different
 977     # register names.
 978     run_dump_test "gpr-names-numeric"
 979     run_dump_test "gpr-names-32"
 980     run_dump_test "gpr-names-n32"
 981     run_dump_test "gpr-names-64"
 982
 983     run_dump_test "fpr-names-numeric"
 984     run_dump_test "fpr-names-32"
 985     run_dump_test "fpr-names-n32"
 986     run_dump_test "fpr-names-64"
 987
 988     run_dump_test "cp0-names-numeric"
 989     run_dump_test "cp0-names-r3000"
 990     run_dump_test "cp0-names-r4000" \
 991                   { { {name} {(r4000)} } { {objdump} {-M cp0-names=r4000} } }
 992     run_dump_test "cp0-names-r4000" \
 993                   { { {name} {(r4400)} } { {objdump} {-M cp0-names=r4400} } }
 994     run_dump_test "cp0-names-mips32"
 995     run_dump_test "cp0-names-mips32r2"
 996     run_dump_test "cp0-names-mips64"
 997     run_dump_test "cp0-names-mips64r2"
 998     run_dump_test "cp0-names-sb1"
 999
1000     run_dump_test "cp0sel-names-numeric"
1001     run_dump_test "cp0sel-names-mips32"
1002     run_dump_test "cp0sel-names-mips32r2"
1003     run_dump_test "cp0sel-names-mips64"
1004     run_dump_test "cp0sel-names-mips64r2"
1005     run_dump_test "cp0sel-names-sb1"
1006
1007     run_dump_test "hwr-names-numeric"
1008     run_dump_test "hwr-names-mips32r2"
1009     run_dump_test "hwr-names-mips64r2"
1010
1011     run_dump_test "ldstla-32"
1012     run_dump_test "ldstla-32-mips3"
1013     run_dump_test "ldstla-32-shared"
1014     run_dump_test "ldstla-32-mips3-shared"
1015     run_list_test "ldstla-32-1" "-mabi=32" \
1016         "MIPS ld-st-la bad constants (ABI o32)"
1017     run_list_test "ldstla-32-mips3-1" "-mabi=32" \
1018         "MIPS ld-st-la bad constants (ABI o32, mips3)"
1019     run_list_test "ldstla-32-1" "-KPIC -mabi=32" \
1020         "MIPS ld-st-la bad constants (ABI o32, shared)"
1021     run_list_test "ldstla-32-mips3-1" "-KPIC -mabi=32" \
1022         "MIPS ld-st-la bad constants (ABI o32, mips3, shared)"
1023     run_dump_test "ldstla-eabi64"
1024     if $has_newabi {
1025         run_dump_test "ldstla-n64"
1026         run_dump_test "ldstla-n64-shared"
1027         run_dump_test "ldstla-n64-sym32"
1028     }
1029
1030     run_dump_test "macro-warn-1"
1031     run_dump_test "macro-warn-2"
1032     run_dump_test "macro-warn-3"
1033     run_dump_test "macro-warn-4"
1034     if $has_newabi {
1035         run_dump_test "macro-warn-1-n32"
1036         run_dump_test "macro-warn-2-n32"
1037     }
1038
1039     run_dump_test "noat-1"
1040     run_list_test "noat-2" ""
1041     run_list_test "noat-3" ""
1042     run_list_test "noat-4" ""
1043     run_list_test "noat-5" ""
1044     run_list_test "noat-6" ""
1045     run_list_test "noat-7" ""
1046
1047     run_dump_test "at-1"
1048     run_list_test "at-2" "-32 -mips1" "MIPS at-2"
1049
1050     run_dump_test "loongson-2e"
1051     run_dump_test "loongson-2f"
1052     run_dump_test "loongson-2f-2"
1053     run_dump_test "loongson-2f-3"
1054
1055     run_dump_test "loongson-3a"
1056     run_dump_test "loongson-3a-2"
1057     run_dump_test "loongson-3a-3"
1058
1059     run_dump_test_arches "octeon"       [mips_arch_list_matching octeon]
1060     run_dump_test_arches "octeon-saa-saad" [mips_arch_list_matching octeonp]
1061     run_list_test_arches "octeon-ill"   [mips_arch_list_matching octeon]
1062     run_dump_test_arches "octeon-pref"  [mips_arch_list_matching octeon]
1063     run_dump_test_arches "octeon2"      [mips_arch_list_matching octeon2]
1064
1065     run_dump_test "smartmips"
1066     run_dump_test_arches "mips32-dsp"   [mips_arch_list_matching mips32r2 \
1067                                             !octeon]
1068     run_dump_test_arches "mips32-dspr2" [mips_arch_list_matching mips32r2 \
1069                                             !octeon]
1070     run_dump_test "mips64-dsp"
1071     run_dump_test "mips32-mt"
1072
1073     if { $elf && !$no_mips16 } {
1074         run_dump_test "mips16-dwarf2"
1075         if $has_newabi {
1076             run_dump_test "mips16-dwarf2-n32"
1077         }
1078     }
1079     if { !$no_mips16 } {
1080         run_dump_test "mips16e-jrc"
1081         run_dump_test "mips16e-save"
1082         run_dump_test "mips16e-64"
1083         run_list_test "mips16e-64" "-march=mips32 -32"
1084         run_dump_test "mips16-intermix"
1085     }
1086     run_dump_test "vxworks1"
1087     run_dump_test "vxworks1-xgot"
1088     run_dump_test "vxworks1-el"
1089     run_dump_test "vxworks1-xgot-el"
1090
1091     run_dump_test "noreorder"
1092     run_dump_test "align"
1093     run_dump_test "align2"
1094     run_dump_test "align2-el"
1095     run_dump_test "align3"
1096     run_dump_test "odd-float"
1097
1098     run_list_test_arches "mips-macro-ill-sfp" "-32 -msingle-float" \
1099                                         [mips_arch_list_matching mips2]
1100     run_list_test_arches "mips-macro-ill-nofp" "-32 -msoft-float" \
1101                                         [mips_arch_list_matching mips2]
1102
1103     run_list_test_arches "mips-hard-float-flag" \
1104         "-32 -msoft-float -mhard-float" \
1105                                         [mips_arch_list_matching mips1 !singlefloat]
1106     run_list_test_arches "mips-double-float-flag" \
1107         "-32 -msingle-float -mdouble-float" \
1108                                         [mips_arch_list_matching mips1 !singlefloat]
1109
1110     run_dump_test "mips16-vis-1"
1111     run_dump_test "call-nonpic-1"
1112     run_dump_test "mips32-sync"
1113     run_dump_test_arches "mips32r2-sync" \
1114                                         [mips_arch_list_matching mips32r2]
1115     run_dump_test_arches "alnv_ps-swap" [mips_arch_list_matching fpisa5]
1116     run_dump_test_arches "cache" [lsort -dictionary -unique [concat \
1117                                         [mips_arch_list_matching mips3] \
1118                                         [mips_arch_list_matching mips32] ] ]
1119     run_dump_test_arches "daddi"        [mips_arch_list_matching mips3]
1120     run_dump_test_arches "pref" [lsort -dictionary -unique [concat \
1121                                         [mips_arch_list_matching mips4] \
1122                                         [mips_arch_list_matching mips32] ] ]
1123
1124     if $has_newabi { run_dump_test "cfi-n64-1" }
1125
1126     run_dump_test "pr12915"
1127     run_dump_test "reginfo-1a"
1128     run_dump_test "reginfo-1b"
1129
1130     if { !$no_micromips } {
1131         run_dump_test "micromips"
1132         run_dump_test "micromips-trap"
1133         run_list_test "micromips-size-0" \
1134             "-32 -march=mips64 -mmicromips" "microMIPS instruction size 0"
1135         run_dump_test "micromips-size-1"
1136         run_dump_test "micromips-branch-relax"
1137         run_dump_test "micromips-branch-relax-pic"
1138         run_dump_test "micromips-branch-delay"
1139         run_dump_test "micromips-warn-branch-delay"
1140         run_dump_test "micromips-warn-branch-delay-1"
1141         run_dump_test "micromips-b16"
1142     }
1143
1144     run_dump_test_arches "mcu"          [mips_arch_list_matching mips32r2 \
1145                                             !octeon]
1146     run_dump_test_arches "hilo-diff-eb" [mips_arch_list_all]
1147     run_dump_test_arches "hilo-diff-el" [mips_arch_list_all]
1148     if $has_newabi {
1149         run_dump_test_arches "hilo-diff-eb-n32" [mips_arch_list_matching mips3]
1150         run_dump_test_arches "hilo-diff-el-n32" [mips_arch_list_matching mips3]
1151         run_dump_test_arches "hilo-diff-eb-n64" [mips_arch_list_matching mips3]
1152         run_dump_test_arches "hilo-diff-el-n64" [mips_arch_list_matching mips3]
1153     }
1154     run_dump_test_arches "lui"          [mips_arch_list_matching mips1]
1155     run_list_test_arches "lui-1" "-32"  [mips_arch_list_matching mips1]
1156     run_list_test_arches "lui-2" "-32"  [mips_arch_list_matching mips1]
1157
1158     run_dump_test "r5900"
1159     run_dump_test "r5900-full"
1160 }