gas/testsuite/gas/mips/mips.exp

   1 #
   2 # Some generic MIPS tests
   3 #
   4
   5 # When adding a new test to this file, try to do the following things:
   6 #
   7 # * If testing assembly and disassembly of code, don't forget to test
   8 # the actual bit encodings of the instructions (using the
   9 # --show-raw-insn flag to objdump).
  10 #
  11 # * Try to run the test for as many architectures as appropriate,
  12 # using the "run_dump_test_arches" or "run_list_test_arches" functions,
  13 # along with the output from a call to "mips_arch_list_matching."
  14 #
  15 # * Be sure to compare the test output before and after your testsuite
  16 # changes, to verify that existing and new tests were run as expected.
  17 # Look for expect ERROR messages in the testsuite .log file to make sure
  18 # the new expect code did not contain errors.
  19
  20 # To add support for a new CPU to this file, add an appropriate entry
  21 # to the sequence of "mips_arch_create" function calls below, and test
  22 # the result.  The new CPU should automatically be used when running
  23 # various tests.  If the new CPU is the default CPU for any tool
  24 # targets, make sure the call to "mips_arch_create" reflects that fact.
  25
  26
  27 # "LOSE" marks information about tests which fail at a particular point
  28 # in time, but which are not XFAILed.  Either they used to pass
  29 # and indicate either regressions or the need to tweak the tests to keep
  30 # up the with code, or they are new tests and it is unknown whether or not
  31 # they should pass as-is for the given object formats.
  32
  33
  34 # The functions below create and manipulate an "architecture data
  35 # array" which contains entries for each MIPS architecture (or CPU)
  36 # known to these tests.  The array contains the following information
  37 # for each architecture, indexed by the name of the architecture
  38 # described by the entry:
  39 #
  40 # displayname: The name of the entry to be used for pretty-printing.
  41 #
  42 # gprsize: The size in bits of General Purpose Registers provided by
  43 # the architecture (must be 32 or 64).
  44 #
  45 # props: A list of text strings which are associated with the
  46 # architecture.  These include the architecture name as well as
  47 # information about what instructions the CPU supports.  When matching
  48 # based on properties, an additional property is added to the normal
  49 # property list, "gpr<gprsize>" so that tests can match CPUs which
  50 # have GPRs of a specific size.  The following properties are most
  51 # useful when matching properties for generic (i.e., not CPU-specific)
  52 # tests:
  53 #
  54 #       mips1, mips2, mips3, mips4, mips5, mips32, mips64
  55 #               The architecture includes the instructions defined
  56 #               by that MIPS ISA.
  57 #
  58 #       fpisa3, fpisa4, fpisa5
  59 #               The architecture includes the floating-point
  60 #               instructions defined by that MIPS ISA.
  61 #
  62 #       gpr_ilocks
  63 #               The architecture interlocks GPRs accesses.  (That is,
  64 #               there are no load delay slots.)
  65 #
  66 #       mips3d  The architecture includes the MIPS-3D ASE.
  67 #
  68 #       ror     The architecture includes hardware rotate instructions.
  69 #
  70 #       gpr32, gpr64
  71 #               The architecture provides 32- or 64-bit General Purpose
  72 #               Registers.
  73 #
  74 # as_flags: The assembler flags used when assembling tests for this
  75 # architecture.
  76 #
  77 # objdump_flags: The objdump flags used when disassembling tests for
  78 # this architecture.
  79 #
  80 # Most entries in the architecture array will have values in all of
  81 # the fields above.  One entry, "default" represents the default CPU
  82 # based on the target of the assembler being built.  If always has
  83 # empty "as_flags" and "objdump_flags."
  84
  85 # mips_arch_init
  86 #
  87 # This function initializes the architecture data array ("mips_arches")
  88 # to be empty.
  89 proc mips_arch_init {} {
  90     global mips_arches
  91
  92     # Catch because the variable won't be set the first time through.
  93     catch {unset mips_arches}
  94 }
  95
  96 # mips_arch_create ARCH GPRSIZE EXTENDS PROPS AS_FLAGS OBJDUMP_FLAGS \
  97 #                  (optional:) DEFAULT_FOR_TARGETS
  98 #
  99 # This function creates a new entry in the architecture data array,
 100 # for the architecture or CPU named ARCH, and fills in the entry
 101 # according to the rest of the arguments.
 102 #
 103 # The new entry's property list is initialized to contain ARCH, any
 104 # properties specified by PROPS, and the properties associated with
 105 # the entry specified by EXTENDS.  (The new architecture is considered
 106 # to extend the capabilities provided by that architecture.)
 107 #
 108 # If DEFAULT_FOR_TARGETS is specified, it is a list of targets for which
 109 # this architecture is the default architecture.  If "istarget" returns
 110 # true for any of the targets in the list, a "default" entry will be
 111 # added to the architecture array which indicates that ARCH is the default
 112 # architecture.
 113 proc mips_arch_create {arch gprsize extends props as_flags objdump_flags
 114                        {default_for_targets {}}} {
 115     global mips_arches
 116
 117     if { [info exists mips_arches($arch)] } {
 118              error "mips_arch_create: arch \"$arch\" already exists"
 119     }
 120     if { $gprsize != 32 && $gprsize != 64 } {
 121         error "mips_arch_create: invalid GPR size $gprsize"
 122     }
 123
 124     set archdata(displayname) $arch
 125     set archdata(gprsize) $gprsize
 126     set archdata(as_flags) $as_flags
 127     set archdata(objdump_flags) $objdump_flags
 128     set archdata(props) $arch
 129     eval lappend archdata(props) $props
 130     if { [string length $extends] != 0 } {
 131         eval lappend archdata(props) [mips_arch_properties $extends 0]
 132     }
 133
 134     set mips_arches($arch) [array get archdata]
 135
 136     # Set as default if appropriate.
 137     foreach target $default_for_targets {
 138         if { [istarget $target] } {
 139             if { [info exists mips_arches(default)] } {
 140                 error "mips_arch_create: default arch already exists"
 141             }
 142
 143             set archdata(displayname) "default = $arch"
 144             set archdata(as_flags) ""
 145             set archdata(objdump_flags) ""
 146
 147             set mips_arches(default) [array get archdata]
 148             break
 149         }
 150     }
 151 }
 152
 153 # mips_arch_destroy ARCH
 154 #
 155 # The opposite of the above.  This function removes an entry from
 156 # the architecture data array, for the architecture or CPU named ARCH.
 157
 158 proc mips_arch_destroy {arch} {
 159     global mips_arches
 160
 161     if { [info exists mips_arches($arch)] } {
 162         unset mips_arches($arch)
 163     }
 164 }
 165
 166 # mips_arch_list_all
 167 #
 168 # This function returns the list of all names of entries in the
 169 # architecture data array (including the default entry, if a default
 170 # is known).
 171 proc mips_arch_list_all {} {
 172     global mips_arches
 173     return [lsort -dictionary [array names mips_arches]]
 174 }
 175
 176 # mips_arch_data ARCH
 177 #
 178 # This function returns the information associated with ARCH
 179 # in the architecture data array, in "array get" form.
 180 proc mips_arch_data {arch} {
 181     global mips_arches
 182
 183     if { ! [info exists mips_arches($arch)] } {
 184         error "mips_arch_data: unknown arch \"$arch\""
 185     }
 186     return $mips_arches($arch)
 187 }
 188
 189 # mips_arch_displayname ARCH
 190 #
 191 # This function returns the printable name associated with ARCH in
 192 # the architecture data array.
 193 proc mips_arch_displayname {arch} {
 194     array set archdata [mips_arch_data $arch]
 195     return $archdata(displayname)
 196 }
 197
 198 # mips_arch_properties ARCH (optional:) INCLUDE_GPRSIZE
 199 #
 200 # This function returns the property list associated with ARCH in the
 201 # architecture data array, including the "canonical" target name as the
 202 # first element.
 203 #
 204 # If INCLUDE_GPRSIZE is non-zero, an additional "gpr32" or "gpr64"
 205 # property will be returned as part of the list based on the
 206 # architecture's GPR size.
 207 proc mips_arch_properties {arch {include_gprsize 1}} {
 208     array set archdata [mips_arch_data $arch]
 209     set props $archdata(props)
 210     if { $include_gprsize } {
 211         lappend props gpr$archdata(gprsize)
 212     }
 213     return $props
 214 }
 215
 216 # mips_arch_as_flags ARCH
 217 #
 218 # This function returns the assembler flags associated with ARCH in
 219 # the architecture data array.
 220 proc mips_arch_as_flags {arch} {
 221     array set archdata [mips_arch_data $arch]
 222     return $archdata(as_flags)
 223 }
 224
 225 # mips_arch_objdump_flags ARCH
 226 #
 227 # This function returns the objdump disassembly flags associated with
 228 # ARCH in the architecture data array.
 229 proc mips_arch_objdump_flags {arch} {
 230     array set archdata [mips_arch_data $arch]
 231     return $archdata(objdump_flags)
 232 }
 233
 234 # mips_arch_matches ARCH PROPMATCHLIST
 235 #
 236 # This function returns non-zero if ARCH matches the set of properties
 237 # described by PROPMATCHLIST.  Each entry in PROPMATCHLIST can either
 238 # be the name of a property which must be matched, or "!" followed by
 239 # the name of a property which must not be matched.  ARCH matches
 240 # PROPMATCHLIST if and only if all of the conditions specified by
 241 # PROPMATCHLIST are satisfied.
 242 proc mips_arch_matches {arch propmatchlist} {
 243     foreach pm $propmatchlist {
 244         if { [string match {!*} $pm] } {
 245             # fail if present.
 246             set inverted 1
 247             set p [string range $pm 1 end]
 248         } {
 249             # fail if not present.
 250             set inverted 0
 251             set p $pm
 252         }
 253
 254         set loc [lsearch -exact [mips_arch_properties $arch] $p]
 255
 256         # required-absent and found, or required-present and not found: fail.
 257         if { ($inverted && $loc != -1) || (! $inverted && $loc == -1) } {
 258             return 0
 259         }
 260     }
 261     return 1
 262 }
 263
 264 # mips_arch_list_matching ARGS
 265 #
 266 # This function returns a list of all architectures which match
 267 # the conditions described by its arguments.  Its arguments are
 268 # taken as a list and used as the PROPMATCHLIST in a call to
 269 # "mips_arch_matches" for each known architecture.
 270 proc mips_arch_list_matching {args} {
 271     set l ""
 272     foreach arch [mips_arch_list_all] {
 273         # For now, don't match default arch until we know what its
 274         # properties actually are.
 275         if { [string compare $arch default] == 0
 276              && [string length [mips_arch_properties default]] == 0} {
 277             continue
 278         }
 279         if { [mips_arch_matches $arch $args] } {
 280             lappend l $arch
 281         }
 282     }
 283     return $l
 284 }
 285
 286
 287 # The functions below facilitate running various types of tests.
 288
 289 # run_dump_test_arch NAME OPTS ARCH
 290 #
 291 # Invoke "run_dump_test" for test NAME with additional assembler options OPTS.
 292 # Add the assembler and disassembler flags that are associated with
 293 # architecture ARCH.
 294 #
 295 # You can override the expected output for particular architectures
 296 # and file formats.  The possible test names are, in order of preference:
 297 #
 298 # 1. CARCH@FORMAT@NAME.d
 299 # 2. CARCH@NAME.d
 300 # 3. FORMAT@NAME.d
 301 # 4. NAME.d
 302 #
 303 # where CARCH is the "canonical" name of architecture ARCH as recorded
 304 # in its associated property list, and where FORMAT is the target's
 305 # file format (one of "elf", "ecoff" or "aout").
 306 proc run_dump_test_arch { name opts arch } {
 307     upvar elf elf ecoff ecoff aout aout
 308     global subdir srcdir
 309
 310     set format [expr { $elf ? "elf" : $ecoff ? "ecoff" : "aout" }]
 311     set proparch [lindex [mips_arch_properties $arch 0] 0]
 312     set prefixes [list ${proparch}@${format}@ ${proparch}@ ]
 313     if { [ string match "octeon*" $proparch ] && $proparch != "octeon" } {
 314       lappend prefixes octeon@
 315       lappend prefixes octeon@${format}@
 316     }
 317     lappend prefixes ${format}@
 318     foreach prefix ${prefixes} {
 319         set archname ${prefix}${name}
 320         if { [file exists "$srcdir/$subdir/${archname}.d"] } {
 321             set name $archname
 322             break
 323         }
 324     }
 325
 326     if [catch {run_dump_test $name \
 327                    "{name    {([concat $opts [mips_arch_displayname $arch]])}}
 328                     {objdump {[mips_arch_objdump_flags $arch]}}
 329                     {as      {[concat $opts [mips_arch_as_flags $arch]]}}"} rv] {
 330         perror "$rv"
 331         untested "$subdir/$name ($arch)"
 332     }
 333 }
 334
 335 # run_dump_test_arches NAME [OPTS] ARCH_LIST
 336 #
 337 # Invoke "run_dump_test_arch" for test NAME, for each architecture
 338 # listed in ARCH_LIST.  OPTS, if specified, is a list of additional
 339 # assembler options that should be used for all architectures.
 340 proc run_dump_test_arches { name args } {
 341     upvar elf elf ecoff ecoff aout aout
 342     set opts ""
 343     if { [llength $args] > 1 } {
 344         set opts [lindex $args 0]
 345         set args [lrange $args 1 end]
 346     }
 347     set arch_list [lindex $args 0]
 348     foreach arch $arch_list {
 349         run_dump_test_arch $name $opts $arch
 350     }
 351 }
 352
 353 # run_list_test_arch NAME OPTS ARCH
 354 #
 355 # Invoke "run_list_test" for test NAME with additional assembler options OPTS.
 356 # Add the assembler flags that are associated with architecture ARCH.
 357 proc run_list_test_arch { name opts arch } {
 358     global subdir
 359
 360     set testname "MIPS $name ([concat $opts [mips_arch_displayname $arch]])"
 361     if [catch {run_list_test \
 362                    $name \
 363                    [concat $opts [mips_arch_as_flags $arch]] \
 364                    $testname} rv] {
 365         perror "$rv"
 366         untested "$testname"
 367     }
 368 }
 369
 370 # run_list_test_arches NAME [OPTS] ARCH_LIST
 371 #
 372 # Invoke "run_list_test_arch" for test NAME, for each architecture listed
 373 # in ARCH_LIST.  OPTS, if specified, is a list of additional assembler
 374 # options that should be used for all architectures.
 375 proc run_list_test_arches { name args } {
 376     set opts ""
 377     if { [llength $args] > 1 } {
 378         set opts [lindex $args 0]
 379         set args [lrange $args 1 end]
 380     }
 381     set arch_list [lindex $args 0]
 382     foreach arch $arch_list {
 383         run_list_test_arch "$name" "$opts" "$arch"
 384     }
 385 }
 386
 387
 388 # Create the architecture data array by providing data for all
 389 # known architectures.
 390 #
 391 # Note that several targets pick default CPU based on ABI.  We
 392 # can't easily handle that; do NOT list those targets as defaulting
 393 # to any architecture.
 394 mips_arch_init
 395 mips_arch_create mips1  32      {}      {} \
 396                         { -march=mips1 -mtune=mips1 } { -mmips:3000 }
 397 mips_arch_create mips2  32      mips1   { gpr_ilocks } \
 398                         { -march=mips2 -mtune=mips2 } { -mmips:6000 }
 399 mips_arch_create mips3  64      mips2   { fpisa3 } \
 400                         { -march=mips3 -mtune=mips3 } { -mmips:4000 }
 401 mips_arch_create mips4  64      mips3   { fpisa4 } \
 402                         { -march=mips4 -mtune=mips4 } { -mmips:8000 }
 403 mips_arch_create mips5  64      mips4   { fpisa5 } \
 404                         { -march=mips5 -mtune=mips5 } { -mmips:mips5 }
 405 mips_arch_create mips32 32      mips2   {} \
 406                         { -march=mips32 -mtune=mips32 } { -mmips:isa32 } \
 407                         { mipsisa32-*-* mipsisa32el-*-* }
 408 mips_arch_create mips32r2 32    mips32  { fpisa3 fpisa4 fpisa5 ror } \
 409                         { -march=mips32r2 -mtune=mips32r2 } \
 410                         { -mmips:isa32r2 } \
 411                         { mipsisa32r2-*-* mipsisa32r2el-*-* }
 412 mips_arch_create mips64 64      mips5   { mips32 } \
 413                         { -march=mips64 -mtune=mips64 } { -mmips:isa64 } \
 414                         { mipsisa64-*-* mipsisa64el-*-* }
 415 mips_arch_create mips64r2 64    mips64  { mips32r2 ror } \
 416                         { -march=mips64r2 -mtune=mips64r2 } \
 417                         { -mmips:isa64r2 } \
 418                         { mipsisa64r2-*-* mipsisa64r2el-*-* }
 419 mips_arch_create mips16 32      {}      {} \
 420                         { -march=mips1 -mips16 } { -mmips:16 }
 421 mips_arch_create micromips 64   mips64r2 {} \
 422                         { -march=mips64 -mmicromips } {}
 423 mips_arch_create r3000  32      mips1   {} \
 424                         { -march=r3000 -mtune=r3000 } { -mmips:3000 }
 425 mips_arch_create r3900  32      mips1   { gpr_ilocks } \
 426                         { -march=r3900 -mtune=r3900 } { -mmips:3900 } \
 427                         { mipstx39-*-* mipstx39el-*-* }
 428 mips_arch_create r4000  64      mips3   {} \
 429                         { -march=r4000 -mtune=r4000 } { -mmips:4000 }
 430 mips_arch_create vr5400 64      mips4   { ror } \
 431                         { -march=vr5400 -mtune=vr5400 } { -mmips:5400 }
 432 mips_arch_create sb1    64      mips64  { mips3d } \
 433                         { -march=sb1 -mtune=sb1 } { -mmips:sb1 } \
 434                         { mipsisa64sb1-*-* mipsisa64sb1el-*-* }
 435 mips_arch_create octeon 64      mips64r2 {} \
 436                         { -march=octeon -mtune=octeon } { -mmips:octeon } \
 437                         { mips64octeon*-*-* }
 438 mips_arch_create octeonp 64     octeon {} \
 439                         { -march=octeon+ -mtune=octeon+ } { -mmips:octeon+ } \
 440                         { }
 441 mips_arch_create octeon2 64     octeonp {} \
 442                         { -march=octeon2 -mtune=octeon2 } { -mmips:octeon2 } \
 443                         { }
 444 mips_arch_create xlr    64      mips64  {} \
 445                         { -march=xlr -mtune=xlr } { -mmips:xlr }
 446
 447 #
 448 # And now begin the actual tests!  VxWorks uses RELA rather than REL
 449 # relocations, so most of the generic dump tests will not work there.
 450 #
 451 if { [istarget mips*-*-vxworks*] } {
 452     run_dump_test "vxworks1"
 453     run_dump_test "vxworks1-xgot"
 454     run_dump_test "vxworks1-el"
 455     run_dump_test "vxworks1-xgot-el"
 456 } elseif { [istarget mips*-*-*] } {
 457     set elf [expr [istarget *-*-elf*] || [istarget *-*-irix5*] || [istarget *-*-irix6* ] || [istarget *-*-linux*] || [istarget *-*-netbsd*] ]
 458     set ecoff [expr [istarget *-*-ecoff*] || [istarget *-*-ultrix*] || [istarget *-*-irix\[1-4\]*] ]
 459     set aout [expr [istarget *-*-bsd*] || [istarget *-*-openbsd*] ]
 460     set addr32 [expr [istarget mipstx39*-*-*] || [istarget mips-*-linux*] || [istarget mipsel-*-linux*] || [istarget mips*-*-ecoff]]
 461     set has_newabi [expr [istarget *-*-irix6*] || [istarget mips*-*-linux*] || [istarget mips*-sde-elf*]]
 462     set no_mips16 [expr !$elf]
 463     set no_micromips [expr !$elf]
 464
 465     if { [istarget "mips*-*-*linux*"] || [istarget "mips*-sde-elf*"] } then {
 466         set tmips "t"
 467     } else {
 468         set tmips ""
 469     }
 470     if [istarget mips*el-*-*] {
 471         set el "el"
 472     } {
 473         set el ""
 474     }
 475     if { $no_mips16 } {
 476         mips_arch_destroy mips16
 477     }
 478     if { $no_micromips } {
 479         mips_arch_destroy micromips
 480     }
 481
 482     run_dump_test_arches "dot-1"        [mips_arch_list_matching mips1]
 483     run_dump_test_arches "abs"          [mips_arch_list_matching mips1]
 484     run_dump_test_arches "add"          [mips_arch_list_matching mips1]
 485     run_dump_test_arches "and"          [mips_arch_list_matching mips1]
 486     run_dump_test_arches "mips1-fp"     [mips_arch_list_matching mips1]
 487     run_list_test_arches "mips1-fp" "-32 -msoft-float" \
 488                                         [mips_arch_list_matching mips1]
 489     run_dump_test "break20"
 490     run_dump_test "trap20"
 491
 492     # LOSE: As of 2002-02-08, "beq" through "bltu" fail for target mips-ecoff.
 493     # See http://sources.redhat.com/ml/binutils/2001-10/msg00418.html for
 494     # more information.  Not sure if the fixes there are correct; should
 495     # branches to external labels be allowed for ECOFF?
 496     run_dump_test_arches "beq"          [mips_arch_list_matching mips1]
 497     run_dump_test_arches "bge"          [mips_arch_list_matching mips1]
 498     run_dump_test_arches "bgeu"         [mips_arch_list_matching mips1]
 499     run_dump_test_arches "blt"          [mips_arch_list_matching mips1]
 500     run_dump_test_arches "bltu"         [mips_arch_list_matching mips1]
 501     run_dump_test_arches "branch-likely" [mips_arch_list_matching mips2]
 502     run_dump_test_arches "branch-misc-1" [mips_arch_list_matching mips1]
 503     run_dump_test_arches "branch-misc-2" [mips_arch_list_matching mips1]
 504     run_dump_test_arches "branch-misc-2pic" [mips_arch_list_matching mips1]
 505     run_dump_test_arches "branch-misc-2-64" [mips_arch_list_matching mips3]
 506     run_dump_test_arches "branch-misc-2pic-64" [mips_arch_list_matching mips3]
 507     run_dump_test "branch-misc-3"
 508     run_dump_test "branch-swap"
 509
 510     if $elf {
 511         # Sweep a range of branch offsets so that it hits a position where
 512         # it is at the beginning of a frag and then swapped with a 16-bit
 513         # instruction from the preceding frag.  The offset will be somewhere
 514         # close below 4096 as this is the default obstack size limit that
 515         # we use and some space will have been already consumed.  The exact
 516         # amount depends on the host's programming model.
 517         for { set count 960 } { $count <= 1024 } { incr count } {
 518             run_list_test "branch-swap-2" "--defsym count=$count" \
 519                 "MIPS branch swapping ($count)"
 520         }
 521     }
 522
 523     run_dump_test "div"
 524
 525     if { !$addr32 } {
 526         run_dump_test_arches "dli"              [mips_arch_list_matching mips3]
 527     }
 528     if $elf {
 529         run_dump_test_arches "elf-jal"  [mips_arch_list_matching mips1]
 530     } else {
 531         run_dump_test "jal"
 532     }
 533     run_dump_test_arches "jal-mask-11"  [mips_arch_list_matching mips1]
 534     run_dump_test_arches "jal-mask-12"  [mips_arch_list_matching mips1]
 535     run_dump_test_arches "jal-mask-21"  [mips_arch_list_matching micromips]
 536     run_dump_test_arches "jal-mask-22"  [mips_arch_list_matching micromips]
 537     run_dump_test "eret-1"
 538     run_dump_test "eret-2"
 539     run_dump_test "eret-3"
 540     run_dump_test_arches "24k-branch-delay-1" \
 541                                         [mips_arch_list_matching mips1]
 542     run_dump_test_arches "24k-triple-stores-1" \
 543                                 [mips_arch_list_matching fpisa5 !octeon]
 544     run_dump_test_arches "24k-triple-stores-2" \
 545                                         [mips_arch_list_matching mips2]
 546     run_dump_test_arches "24k-triple-stores-3" \
 547                                         [mips_arch_list_matching mips2]
 548     run_dump_test_arches "24k-triple-stores-4" \
 549                                         [mips_arch_list_matching mips2]
 550     run_dump_test_arches "24k-triple-stores-5" \
 551                                         [mips_arch_list_matching mips1]
 552     run_dump_test_arches "24k-triple-stores-6" \
 553                                         [mips_arch_list_matching mips2]
 554     run_dump_test_arches "24k-triple-stores-7" \
 555                                         [mips_arch_list_matching mips2]
 556     run_dump_test_arches "24k-triple-stores-8" \
 557                                         [mips_arch_list_matching mips1]
 558     run_dump_test_arches "24k-triple-stores-9" \
 559                                         [mips_arch_list_matching mips1]
 560     run_dump_test_arches "24k-triple-stores-10" \
 561                                         [mips_arch_list_matching mips1]
 562     if $elf {
 563         run_dump_test_arches "24k-triple-stores-11" \
 564                                         [mips_arch_list_matching mips1]
 565     }
 566
 567     if $elf {
 568         run_dump_test_arches "jal-svr4pic" \
 569                                         [mips_arch_list_matching mips1]
 570         run_dump_test_arches "jal-svr4pic-noreorder" \
 571                                         [mips_arch_list_matching mips1]
 572     }
 573     if $elf { run_dump_test "jal-xgot" }
 574     run_list_test_arches "jal-range" "-32" [mips_arch_list_matching mips1]
 575     if $has_newabi { run_dump_test "jal-newabi" }
 576     if !$aout { run_dump_test "la" }
 577     if $elf { run_dump_test "la-svr4pic" }
 578     if $elf { run_dump_test "la-xgot" }
 579     if $elf { run_dump_test "lca-svr4pic" }
 580     if $elf { run_dump_test "lca-xgot" }
 581     if !$aout {
 582         # XXX FIXME: Has mips2 and later insns with mips1 disassemblies.
 583         # (Should split and then use appropriate arch lists.)
 584         run_dump_test_arches "lb"       [mips_arch_list_matching mips1 !mips2]
 585     }
 586     if $elf {
 587         run_dump_test_arches "lb-svr4pic" \
 588                                 [mips_arch_list_matching mips1 !gpr_ilocks]
 589         run_dump_test_arches "lb-svr4pic-ilocks" [mips_arch_list_matching gpr_ilocks]
 590     }
 591     if $elf {
 592         # Both versions specify the cpu, so we can run both regardless of
 593         # the interlocking in the configured default cpu.
 594         run_dump_test "lb-xgot"
 595         run_dump_test "lb-xgot-ilocks"
 596     }
 597     if !$aout {
 598         run_dump_test_arches "ld"       [mips_arch_list_matching mips1]
 599         run_dump_test_arches "ld-forward" \
 600                                         [mips_arch_list_matching mips1]
 601         run_dump_test_arches "sd"       [mips_arch_list_matching mips1]
 602         run_dump_test_arches "sd-forward" \
 603                                         [mips_arch_list_matching mips1]
 604         run_dump_test_arches "l_d"      [mips_arch_list_matching mips1]
 605         run_dump_test_arches "l_d-forward" \
 606                                         [mips_arch_list_matching mips1]
 607         run_dump_test_arches "s_d"      [mips_arch_list_matching mips1]
 608         run_dump_test_arches "s_d-forward" \
 609                                         [mips_arch_list_matching mips1]
 610         run_dump_test_arches "ldc1"     [mips_arch_list_matching mips2]
 611         run_dump_test_arches "ldc1-forward" \
 612                                         [mips_arch_list_matching mips2]
 613         run_dump_test_arches "sdc1"     [mips_arch_list_matching mips2]
 614         run_dump_test_arches "sdc1-forward" \
 615                                         [mips_arch_list_matching mips2]
 616         if $has_newabi {
 617             run_dump_test_arches "ld-n32" \
 618                                         [mips_arch_list_matching mips3]
 619             run_dump_test_arches "ld-forward-n32" \
 620                                         [mips_arch_list_matching mips3]
 621             run_dump_test_arches "sd-n32" \
 622                                         [mips_arch_list_matching mips3]
 623             run_dump_test_arches "sd-forward-n32" \
 624                                         [mips_arch_list_matching mips3]
 625             run_dump_test_arches "l_d-n32" \
 626                                         [mips_arch_list_matching mips3]
 627             run_dump_test_arches "l_d-forward-n32" \
 628                                         [mips_arch_list_matching mips3]
 629             run_dump_test_arches "s_d-n32" \
 630                                         [mips_arch_list_matching mips3]
 631             run_dump_test_arches "s_d-forward-n32" \
 632                                         [mips_arch_list_matching mips3]
 633             run_dump_test_arches "ldc1-n32" \
 634                                         [mips_arch_list_matching mips3]
 635             run_dump_test_arches "ldc1-forward-n32" \
 636                                         [mips_arch_list_matching mips3]
 637             run_dump_test_arches "sdc1-n32" \
 638                                         [mips_arch_list_matching mips3]
 639             run_dump_test_arches "sdc1-forward-n32" \
 640                                         [mips_arch_list_matching mips3]
 641             run_dump_test_arches "ld-n64" \
 642                                         [mips_arch_list_matching mips3]
 643             run_dump_test_arches "ld-forward-n64" \
 644                                         [mips_arch_list_matching mips3]
 645             run_dump_test_arches "sd-n64" \
 646                                         [mips_arch_list_matching mips3]
 647             run_dump_test_arches "sd-forward-n64" \
 648                                         [mips_arch_list_matching mips3]
 649             run_dump_test_arches "l_d-n64" \
 650                                         [mips_arch_list_matching mips3]
 651             run_dump_test_arches "l_d-forward-n64" \
 652                                         [mips_arch_list_matching mips3]
 653             run_dump_test_arches "s_d-n64" \
 654                                         [mips_arch_list_matching mips3]
 655             run_dump_test_arches "s_d-forward-n64" \
 656                                         [mips_arch_list_matching mips3]
 657             run_dump_test_arches "ldc1-n64" \
 658                                         [mips_arch_list_matching mips3]
 659             run_dump_test_arches "ldc1-forward-n64" \
 660                                         [mips_arch_list_matching mips3]
 661             run_dump_test_arches "sdc1-n64" \
 662                                         [mips_arch_list_matching mips3]
 663             run_dump_test_arches "sdc1-forward-n64" \
 664                                         [mips_arch_list_matching mips3]
 665         }
 666     }
 667     if $elf { run_dump_test "ld-svr4pic" }
 668     if $elf { run_dump_test "ld-xgot" }
 669     run_dump_test_arches "li"           [mips_arch_list_matching mips1]
 670     if !$aout { run_dump_test "lifloat" }
 671     if $elf { run_dump_test "lif-svr4pic" }
 672     if $elf { run_dump_test "lif-xgot" }
 673     run_dump_test_arches "mips4"        [mips_arch_list_matching mips4]
 674     run_dump_test_arches "mips4-fp" "-32" \
 675                                         [mips_arch_list_matching fpisa4]
 676     run_dump_test_arches "mips4-fp" "-mabi=o64" \
 677                                         [mips_arch_list_matching fpisa4 gpr64]
 678     run_list_test_arches "mips4-fp" "-32 -msoft-float" \
 679                                         [mips_arch_list_matching fpisa4]
 680     run_dump_test_arches "mips4-branch-likely" \
 681                                         [mips_arch_list_matching mips4]
 682     run_list_test_arches "mips4-branch-likely" "-32 -msoft-float" \
 683                                         [mips_arch_list_matching mips4]
 684     run_dump_test_arches "mips5-fp" "-32" \
 685                                         [mips_arch_list_matching fpisa5]
 686     run_dump_test_arches "mips5-fp" "-mabi=o64" \
 687                                         [mips_arch_list_matching fpisa5 gpr64]
 688     run_dump_test "mul"
 689
 690     run_dump_test_arches "rol"          [mips_arch_list_matching mips1 !ror]
 691     run_dump_test_arches "rol-hw"       [mips_arch_list_matching ror]
 692
 693     run_dump_test_arches "rol64"        [mips_arch_list_matching gpr64 !ror]
 694     run_dump_test_arches "rol64-hw"     [mips_arch_list_matching gpr64 ror]
 695
 696     if !$aout { run_dump_test "sb" }
 697     run_dump_test "trunc"
 698     if !$aout { run_dump_test "ulh" }
 699     run_dump_test_arches "ulh2-eb"      [mips_arch_list_matching mips1]
 700     run_dump_test_arches "ulh2-el"      [mips_arch_list_matching mips1]
 701     if $elf { run_dump_test "ulh-svr4pic" }
 702     if $elf { run_dump_test "ulh-xgot" }
 703     if !$aout {
 704         run_dump_test "ulw"
 705         run_dump_test "uld"
 706         run_dump_test "ush"
 707         run_dump_test "usw"
 708         run_dump_test "usd"
 709     }
 710     run_dump_test_arches "ulw2-eb" \
 711                                 [mips_arch_list_matching mips1 !gpr_ilocks]
 712     run_dump_test_arches "ulw2-eb-ilocks" [mips_arch_list_matching gpr_ilocks]
 713     run_dump_test_arches "ulw2-el" \
 714                                 [mips_arch_list_matching mips1 !gpr_ilocks]
 715     run_dump_test_arches "ulw2-el-ilocks" [mips_arch_list_matching gpr_ilocks]
 716
 717     run_dump_test_arches "uld2-eb" [mips_arch_list_matching mips3]
 718     run_dump_test_arches "uld2-el" [mips_arch_list_matching mips3]
 719
 720     # The mips16 test can only be run on ELF, because only ELF
 721     # supports the necessary mips16 reloc.
 722     if { $elf && !$no_mips16 } {
 723         run_dump_test "mips16"
 724         run_dump_test "mips16-64"
 725         # Check MIPS16e extensions
 726         run_dump_test_arches "mips16e" \
 727                                 [mips_arch_list_matching mips32 !micromips]
 728         # Check jalx handling
 729         run_dump_test "mips16-jalx"
 730         run_dump_test "mips-jalx"
 731         run_dump_test "mips-jalx-2"
 732         # Check MIPS16 HI16/LO16 relocations
 733         run_dump_test "mips16-hilo"
 734         if $has_newabi {
 735             run_dump_test "mips16-hilo-n32"
 736         }
 737         run_dump_test "mips16-hilo-match"
 738     }
 739     run_dump_test "delay"
 740     run_dump_test "nodelay"
 741     run_dump_test "mips4010"
 742     run_dump_test "mips4650"
 743     run_dump_test "mips4100"
 744     run_dump_test "vr4111"
 745     run_dump_test "vr4120"
 746     run_dump_test "vr4120-2"
 747     run_dump_test "vr4130"
 748     run_dump_test "vr5400"
 749     run_dump_test "vr5500"
 750     run_dump_test "rm7000"
 751     run_dump_test "perfcount"
 752     run_dump_test "lineno"
 753     run_dump_test "sync"
 754
 755     run_dump_test_arches "mips32"       [mips_arch_list_matching mips32]
 756     run_dump_test_arches "mips32-imm"   [mips_arch_list_matching mips32]
 757
 758     run_dump_test_arches "mips32-sf32"  [mips_arch_list_matching mips32]
 759     run_list_test_arches "mips32-sf32" "-32 -msoft-float" \
 760                                         [mips_arch_list_matching mips32]
 761     run_dump_test_arches "mips32-cp2"   [mips_arch_list_matching mips32 \
 762                                             !octeon]
 763
 764     run_dump_test_arches "mips32r2"     [mips_arch_list_matching mips32r2]
 765     run_dump_test_arches "mips32r2-cp2" [mips_arch_list_matching mips32r2 \
 766                                             !octeon]
 767     run_dump_test_arches "mips32r2-fp32" \
 768                                         [mips_arch_list_matching mips32r2]
 769     run_list_test_arches "mips32r2-fp32" "-32 -msoft-float" \
 770                                         [mips_arch_list_matching mips32r2]
 771     run_list_test_arches "mips32r2-ill" "-32" \
 772                         [mips_arch_list_matching mips32r2 gpr32]
 773     run_list_test_arches "mips32r2-ill-fp64" "-mabi=o64" \
 774                         [mips_arch_list_matching mips32r2 gpr64]
 775     run_list_test_arches "mips32r2-ill-nofp" "-32 -msoft-float" \
 776                         [mips_arch_list_matching mips32r2]
 777
 778     run_dump_test_arches "mips64"       [mips_arch_list_matching mips64]
 779     run_dump_test_arches "mips64-cp2"   [mips_arch_list_matching mips64 \
 780                                             !octeon]
 781
 782     run_dump_test_arches "mips64r2"     [mips_arch_list_matching mips64r2]
 783     run_list_test_arches "mips64r2-ill" [mips_arch_list_matching mips64r2]
 784
 785     run_dump_test "set-arch"
 786
 787     if { !$addr32 } {
 788         run_dump_test "mips64-mips3d"
 789         run_dump_test_arches "mips64-mips3d-incl" [mips_arch_list_matching mips3d]
 790
 791         run_dump_test "mips64-mdmx"
 792         run_dump_test "sb1-ext-mdmx"
 793         run_dump_test "sb1-ext-ps"
 794         run_dump_test "xlr-ext"
 795     }
 796
 797     run_dump_test_arches "relax"        [mips_arch_list_matching mips2]
 798     run_dump_test_arches "relax-at"     [mips_arch_list_matching mips2]
 799     run_dump_test "relax-swap1-mips1"
 800     run_dump_test "relax-swap1-mips2"
 801     run_dump_test "relax-swap2"
 802     run_dump_test_arches "relax-swap3"  [mips_arch_list_all]
 803     run_list_test_arches "relax-bposge" "-mdsp -relax-branch" \
 804                                         [mips_arch_list_matching mips64r2 \
 805                                             !micromips]
 806
 807     run_list_test "illegal" "-32"
 808     run_list_test "baddata1" "-32"
 809     run_list_test "jalr" ""
 810
 811     # LOSE: As of 2002-02-08, the next 4 tests fail for target mips-ecoff.
 812     # It's unknown whether they _should_ pass as-is, or whether different
 813     # variants are needed for ELF and ECOFF.
 814     run_dump_test "mips-gp32-fp32"
 815     run_dump_test "mips-gp32-fp64"
 816     run_dump_test "mips-gp64-fp32"
 817     run_dump_test "mips-gp64-fp64"
 818
 819     if $elf {
 820         # Make sure that -mcpu=FOO and -mFOO are equivalent.  Assemble a file
 821         # containing 4650-specific instructions with -m4650 and -mcpu=4650,
 822         # and verify that they're the same.  Specifically, we're checking
 823         # that the EF_MIPS_MACH field is set, and that the 4650 'mul'
 824         # instruction does get used.  In previous versions of GAS,
 825         # only -mcpu=4650 would set the EF_MIPS_MACH field; -m4650 wouldn't.
 826         run_dump_test "elf_e_flags1"
 827         run_dump_test "elf_e_flags2"
 828         run_dump_test "elf_e_flags3"
 829         run_dump_test "elf_e_flags4"
 830
 831         # Check EF_MIPS_ARCH markings for each supported architecture.
 832         run_dump_test "elf_arch_mips1"
 833         run_dump_test "elf_arch_mips2"
 834         run_dump_test "elf_arch_mips3"
 835         run_dump_test "elf_arch_mips4"
 836         run_dump_test "elf_arch_mips5"
 837         run_dump_test "elf_arch_mips32"
 838         run_dump_test "elf_arch_mips32r2"
 839         run_dump_test "elf_arch_mips64"
 840         run_dump_test "elf_arch_mips64r2"
 841
 842         # Verify that ASE markings are handled properly.
 843         if { !$no_mips16 } {
 844             run_dump_test "elf_ase_mips16"
 845             run_dump_test "elf_ase_mips16-2"
 846         }
 847         if { !$no_micromips } {
 848             run_dump_test "elf_ase_micromips"
 849             run_dump_test "elf_ase_micromips-2"
 850         }
 851
 852         run_dump_test "mips-gp32-fp32-pic"
 853         run_dump_test "mips-gp32-fp64-pic"
 854         run_dump_test "mips-gp64-fp32-pic"
 855         run_dump_test "mips-gp64-fp64-pic"
 856
 857         run_dump_test "mips-abi32"
 858         run_dump_test "mips-abi32-pic"
 859         run_dump_test "mips-abi32-pic2"
 860
 861         run_dump_test "elf${el}-rel"
 862         run_dump_test_arches "elf${el}-rel2" [mips_arch_list_matching gpr64]
 863         run_dump_test "e32${el}-rel2"
 864         run_dump_test "elf${el}-rel3"
 865         run_dump_test_arches "elf-rel4" [mips_arch_list_matching gpr64]
 866         run_dump_test "e32-rel4"
 867         run_dump_test "elf-rel5"
 868         run_dump_test "elf-rel6"
 869         if $has_newabi {
 870             run_dump_test "elf-rel6-n32"
 871             run_dump_test "elf-rel6-n64"
 872         }
 873         run_dump_test "elf-rel7"
 874         run_dump_test "elf-rel8"
 875         run_dump_test "elf-rel8-mips16"
 876         run_dump_test "elf-rel9"
 877         run_dump_test "elf-rel9-mips16"
 878         if $has_newabi {
 879             run_dump_test "elf-rel10"
 880             run_dump_test "elf-rel11"
 881         }
 882         run_dump_test "elf-rel12"
 883         run_dump_test "elf-rel13"
 884         run_dump_test "elf-rel13-mips16"
 885         run_dump_test "elf-rel14"
 886
 887         if $has_newabi {
 888             run_dump_test "elf-rel15"
 889             run_dump_test "elf-rel16"
 890
 891             run_dump_test "elf-rel-got-n32"
 892             run_dump_test "elf-rel-xgot-n32"
 893             run_dump_test "elf-rel-got-n64"
 894             run_dump_test "elf-rel-xgot-n64"
 895         }
 896         run_dump_test "elf-rel17"
 897         if $has_newabi {
 898             run_dump_test "elf-rel18"
 899         }
 900         run_dump_test "elf-rel19"
 901         run_dump_test "elf-rel20"
 902         if $has_newabi {
 903             run_dump_test "elf-rel21"
 904             run_dump_test "elf-rel22"
 905             run_dump_test "elf-rel23"
 906             run_dump_test "elf-rel23a"
 907             run_dump_test "elf-rel23b"
 908             run_dump_test "elf-rel24"
 909         }
 910
 911         run_dump_test "elf-rel25"
 912         run_dump_test "elf-rel25a"
 913         run_dump_test "elf-rel26"
 914
 915         run_dump_test_arches "elf-rel27" [mips_arch_list_all]
 916
 917         if $has_newabi {
 918             run_dump_test "elf-rel28-n32"
 919             run_dump_test "elf-rel28-n64"
 920             run_dump_test_arches "elf-rel29" [mips_arch_list_matching mips3]
 921         }
 922         run_list_test_arches "elf-rel30" "-32" [mips_arch_list_all]
 923
 924         if { !$no_mips16 } {
 925             run_dump_test "${tmips}mips${el}16-e"
 926             run_dump_test "${tmips}mips${el}16-f"
 927         }
 928         run_dump_test "elf-consthilo"
 929         run_dump_test "expr1"
 930
 931         run_list_test "tls-ill" "-32"
 932         run_dump_test "tls-o32"
 933         run_dump_test "tls-relw"
 934         run_dump_test "jalr2"
 935
 936         run_dump_test_arches "aent"     [mips_arch_list_matching mips1]
 937
 938         run_dump_test_arches "branch-misc-4" \
 939                                         [mips_arch_list_matching mips1]
 940         run_dump_test_arches "branch-misc-4-64" \
 941                                         [mips_arch_list_matching mips3]
 942
 943         run_dump_test_arches "loc-swap" [mips_arch_list_all]
 944         run_dump_test_arches "loc-swap-dis" \
 945                                         [mips_arch_list_all]
 946         run_dump_test_arches "loc-swap-2" [mips_arch_list_all]
 947     }
 948
 949     if $has_newabi {
 950         run_dump_test "n32-consec"
 951     }
 952
 953     # tests of objdump's ability to disassemble using different
 954     # register names.
 955     run_dump_test "gpr-names-numeric"
 956     run_dump_test "gpr-names-32"
 957     run_dump_test "gpr-names-n32"
 958     run_dump_test "gpr-names-64"
 959
 960     run_dump_test "fpr-names-numeric"
 961     run_dump_test "fpr-names-32"
 962     run_dump_test "fpr-names-n32"
 963     run_dump_test "fpr-names-64"
 964
 965     run_dump_test "cp0-names-numeric"
 966     run_dump_test "cp0-names-r3000"
 967     run_dump_test "cp0-names-r4000" \
 968                   { { {name} {(r4000)} } { {objdump} {-M cp0-names=r4000} } }
 969     run_dump_test "cp0-names-r4000" \
 970                   { { {name} {(r4400)} } { {objdump} {-M cp0-names=r4400} } }
 971     run_dump_test "cp0-names-mips32"
 972     run_dump_test "cp0-names-mips32r2"
 973     run_dump_test "cp0-names-mips64"
 974     run_dump_test "cp0-names-mips64r2"
 975     run_dump_test "cp0-names-sb1"
 976
 977     run_dump_test "cp0sel-names-numeric"
 978     run_dump_test "cp0sel-names-mips32"
 979     run_dump_test "cp0sel-names-mips32r2"
 980     run_dump_test "cp0sel-names-mips64"
 981     run_dump_test "cp0sel-names-mips64r2"
 982     run_dump_test "cp0sel-names-sb1"
 983
 984     run_dump_test "hwr-names-numeric"
 985     run_dump_test "hwr-names-mips32r2"
 986     run_dump_test "hwr-names-mips64r2"
 987
 988     run_dump_test "ldstla-32"
 989     run_dump_test "ldstla-32-mips3"
 990     run_dump_test "ldstla-32-shared"
 991     run_dump_test "ldstla-32-mips3-shared"
 992     run_list_test "ldstla-32-1" "-mabi=32" \
 993         "MIPS ld-st-la bad constants (ABI o32)"
 994     run_list_test "ldstla-32-mips3-1" "-mabi=32" \
 995         "MIPS ld-st-la bad constants (ABI o32, mips3)"
 996     run_list_test "ldstla-32-1" "-KPIC -mabi=32" \
 997         "MIPS ld-st-la bad constants (ABI o32, shared)"
 998     run_list_test "ldstla-32-mips3-1" "-KPIC -mabi=32" \
 999         "MIPS ld-st-la bad constants (ABI o32, mips3, shared)"
1000     run_dump_test "ldstla-eabi64"
1001     if $has_newabi {
1002         run_dump_test "ldstla-n64"
1003         run_dump_test "ldstla-n64-shared"
1004         run_dump_test "ldstla-n64-sym32"
1005     }
1006
1007     run_dump_test "macro-warn-1"
1008     run_dump_test "macro-warn-2"
1009     run_dump_test "macro-warn-3"
1010     run_dump_test "macro-warn-4"
1011     if $has_newabi {
1012         run_dump_test "macro-warn-1-n32"
1013         run_dump_test "macro-warn-2-n32"
1014     }
1015
1016     run_dump_test "noat-1"
1017     run_list_test "noat-2" ""
1018     run_list_test "noat-3" ""
1019     run_list_test "noat-4" ""
1020     run_list_test "noat-5" ""
1021     run_list_test "noat-6" ""
1022     run_list_test "noat-7" ""
1023
1024     run_dump_test "at-1"
1025     run_list_test "at-2" "-32 -mips1" "MIPS at-2"
1026
1027     run_dump_test "loongson-2e"
1028     run_dump_test "loongson-2f"
1029     run_dump_test "loongson-2f-2"
1030     run_dump_test "loongson-2f-3"
1031
1032     run_dump_test "loongson-3a"
1033     run_dump_test "loongson-3a-2"
1034     run_dump_test "loongson-3a-3"
1035
1036     run_dump_test_arches "octeon"       [mips_arch_list_matching octeon]
1037     run_dump_test_arches "octeon-saa-saad" [mips_arch_list_matching octeonp]
1038     run_list_test_arches "octeon-ill"   [mips_arch_list_matching octeon]
1039     run_dump_test_arches "octeon-pref"  [mips_arch_list_matching octeon]
1040     run_dump_test_arches "octeon2"      [mips_arch_list_matching octeon2]
1041
1042     run_dump_test "smartmips"
1043     run_dump_test_arches "mips32-dsp"   [mips_arch_list_matching mips32r2 \
1044                                             !octeon]
1045     run_dump_test_arches "mips32-dspr2" [mips_arch_list_matching mips32r2 \
1046                                             !octeon]
1047     run_dump_test "mips64-dsp"
1048     run_dump_test "mips32-mt"
1049
1050     if { $elf && !$no_mips16 } {
1051         run_dump_test "mips16-dwarf2"
1052         if $has_newabi {
1053             run_dump_test "mips16-dwarf2-n32"
1054         }
1055     }
1056     if { !$no_mips16 } {
1057         run_dump_test "mips16e-jrc"
1058         run_dump_test "mips16e-save"
1059         run_dump_test "mips16e-64"
1060         run_list_test "mips16e-64" "-march=mips32 -32"
1061         run_dump_test "mips16-intermix"
1062     }
1063     run_dump_test "vxworks1"
1064     run_dump_test "vxworks1-xgot"
1065     run_dump_test "vxworks1-el"
1066     run_dump_test "vxworks1-xgot-el"
1067
1068     run_dump_test "noreorder"
1069     run_dump_test "align"
1070     run_dump_test "align2"
1071     run_dump_test "align2-el"
1072     run_dump_test "align3"
1073     run_dump_test "odd-float"
1074
1075     run_list_test_arches "mips-macro-ill-sfp" "-32 -msingle-float" \
1076                                         [mips_arch_list_matching mips2]
1077     run_list_test_arches "mips-macro-ill-nofp" "-32 -msoft-float" \
1078                                         [mips_arch_list_matching mips2]
1079
1080     run_list_test_arches "mips-hard-float-flag" \
1081         "-32 -msoft-float -mhard-float" \
1082                                         [mips_arch_list_matching mips1]
1083     run_list_test_arches "mips-double-float-flag" \
1084         "-32 -msingle-float -mdouble-float" \
1085                                         [mips_arch_list_matching mips1]
1086
1087     run_dump_test "mips16-vis-1"
1088     run_dump_test "call-nonpic-1"
1089     run_dump_test "mips32-sync"
1090     run_dump_test_arches "mips32r2-sync" \
1091                                         [mips_arch_list_matching mips32r2]
1092     run_dump_test_arches "alnv_ps-swap" [mips_arch_list_matching fpisa5]
1093     run_dump_test_arches "cache" [lsort -dictionary -unique [concat \
1094                                         [mips_arch_list_matching mips3] \
1095                                         [mips_arch_list_matching mips32] ] ]
1096     run_dump_test_arches "daddi"        [mips_arch_list_matching mips3]
1097     run_dump_test_arches "pref" [lsort -dictionary -unique [concat \
1098                                         [mips_arch_list_matching mips4] \
1099                                         [mips_arch_list_matching mips32] ] ]
1100
1101     if $has_newabi { run_dump_test "cfi-n64-1" }
1102
1103     run_dump_test "pr12915"
1104     run_dump_test "reginfo-1a"
1105     run_dump_test "reginfo-1b"
1106
1107     if { !$no_micromips } {
1108         run_dump_test "micromips"
1109         run_dump_test "micromips-trap"
1110         run_list_test "micromips-size-0" \
1111             "-32 -march=mips64 -mmicromips" "microMIPS instruction size 0"
1112         run_dump_test "micromips-size-1"
1113         run_dump_test "micromips-branch-relax"
1114         run_dump_test "micromips-branch-relax-pic"
1115         run_dump_test "micromips-branch-delay"
1116         run_dump_test "micromips-warn-branch-delay"
1117         run_dump_test "micromips-warn-branch-delay-1"
1118         run_dump_test "micromips-b16"
1119     }
1120
1121     run_dump_test_arches "mcu"          [mips_arch_list_matching mips32r2 \
1122                                             !octeon]
1123     run_dump_test_arches "hilo-diff-eb" [mips_arch_list_all]
1124     run_dump_test_arches "hilo-diff-el" [mips_arch_list_all]
1125     if $has_newabi {
1126         run_dump_test_arches "hilo-diff-eb-n32" [mips_arch_list_matching mips3]
1127         run_dump_test_arches "hilo-diff-el-n32" [mips_arch_list_matching mips3]
1128         run_dump_test_arches "hilo-diff-eb-n64" [mips_arch_list_matching mips3]
1129         run_dump_test_arches "hilo-diff-el-n64" [mips_arch_list_matching mips3]
1130     }
1131 }