gas/testsuite/gas/mips/mips.exp

   1 # Copyright 2012, 2013
   2 # Free Software Foundation, Inc.
   3
   4 # This program is free software; you can redistribute it and/or modify
   5 # it under the terms of the GNU General Public License as published by
   6 # the Free Software Foundation; either version 3 of the License, or
   7 # (at your option) any later version.
   8 #
   9 # This program is distributed in the hope that it will be useful,
  10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12 # GNU General Public License for more details.
  13 #
  14 # You should have received a copy of the GNU General Public License
  15 # along with this program; if not, write to the Free Software
  16 # Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.
  17
  18 #
  19 # Some generic MIPS tests
  20 #
  21
  22 # When adding a new test to this file, try to do the following things:
  23 #
  24 # * If testing assembly and disassembly of code, don't forget to test
  25 # the actual bit encodings of the instructions (using the
  26 # --show-raw-insn flag to objdump).
  27 #
  28 # * Try to run the test for as many architectures as appropriate,
  29 # using the "run_dump_test_arches" or "run_list_test_arches" functions,
  30 # along with the output from a call to "mips_arch_list_matching."
  31 #
  32 # * Be sure to compare the test output before and after your testsuite
  33 # changes, to verify that existing and new tests were run as expected.
  34 # Look for expect ERROR messages in the testsuite .log file to make sure
  35 # the new expect code did not contain errors.
  36
  37 # To add support for a new CPU to this file, add an appropriate entry
  38 # to the sequence of "mips_arch_create" function calls below, and test
  39 # the result.  The new CPU should automatically be used when running
  40 # various tests.  If the new CPU is the default CPU for any tool
  41 # targets, make sure the call to "mips_arch_create" reflects that fact.
  42
  43
  44 # "LOSE" marks information about tests which fail at a particular point
  45 # in time, but which are not XFAILed.  Either they used to pass
  46 # and indicate either regressions or the need to tweak the tests to keep
  47 # up the with code, or they are new tests and it is unknown whether or not
  48 # they should pass as-is for the given object formats.
  49
  50
  51 # The functions below create and manipulate an "architecture data
  52 # array" which contains entries for each MIPS architecture (or CPU)
  53 # known to these tests.  The array contains the following information
  54 # for each architecture, indexed by the name of the architecture
  55 # described by the entry:
  56 #
  57 # displayname: The name of the entry to be used for pretty-printing.
  58 #
  59 # gprsize: The size in bits of General Purpose Registers provided by
  60 # the architecture (must be 32 or 64).
  61 #
  62 # props: A list of text strings which are associated with the
  63 # architecture.  These include the architecture name as well as
  64 # information about what instructions the CPU supports.  When matching
  65 # based on properties, an additional property is added to the normal
  66 # property list, "gpr<gprsize>" so that tests can match CPUs which
  67 # have GPRs of a specific size.  The following properties are most
  68 # useful when matching properties for generic (i.e., not CPU-specific)
  69 # tests:
  70 #
  71 #       mips1, mips2, mips3, mips4, mips5, mips32, mips64
  72 #               The architecture includes the instructions defined
  73 #               by that MIPS ISA.
  74 #
  75 #       fpisa3, fpisa4, fpisa5
  76 #               The architecture includes the floating-point
  77 #               instructions defined by that MIPS ISA.
  78 #
  79 #       gpr_ilocks
  80 #               The architecture interlocks GPRs accesses.  (That is,
  81 #               there are no load delay slots.)
  82 #
  83 #       mips3d  The architecture includes the MIPS-3D ASE.
  84 #
  85 #       ror     The architecture includes hardware rotate instructions.
  86 #
  87 #       gpr32, gpr64
  88 #               The architecture provides 32- or 64-bit General Purpose
  89 #               Registers.
  90 #
  91 #       singlefloat
  92 #               The CPU is 64 bit, but only supports 32 bit FPU.
  93 #
  94 #       nollsc
  95 #               The CPU doesn't support ll, sc, lld and scd instructions.
  96 #
  97 # as_flags: The assembler flags used when assembling tests for this
  98 # architecture.
  99 #
 100 # objdump_flags: The objdump flags used when disassembling tests for
 101 # this architecture.
 102 #
 103 # Most entries in the architecture array will have values in all of
 104 # the fields above.  One entry, "default" represents the default CPU
 105 # based on the target of the assembler being built.  If always has
 106 # empty "as_flags" and "objdump_flags."
 107
 108 # mips_arch_init
 109 #
 110 # This function initializes the architecture data array ("mips_arches")
 111 # to be empty.
 112 proc mips_arch_init {} {
 113     global mips_arches
 114
 115     # Catch because the variable won't be set the first time through.
 116     catch {unset mips_arches}
 117 }
 118
 119 # mips_arch_create ARCH GPRSIZE EXTENDS PROPS AS_FLAGS OBJDUMP_FLAGS \
 120 #                  (optional:) DEFAULT_FOR_TARGETS
 121 #
 122 # This function creates a new entry in the architecture data array,
 123 # for the architecture or CPU named ARCH, and fills in the entry
 124 # according to the rest of the arguments.
 125 #
 126 # The new entry's property list is initialized to contain ARCH, any
 127 # properties specified by PROPS, and the properties associated with
 128 # the entry specified by EXTENDS.  (The new architecture is considered
 129 # to extend the capabilities provided by that architecture.)
 130 #
 131 # If DEFAULT_FOR_TARGETS is specified, it is a list of targets for which
 132 # this architecture is the default architecture.  If "istarget" returns
 133 # true for any of the targets in the list, a "default" entry will be
 134 # added to the architecture array which indicates that ARCH is the default
 135 # architecture.
 136 proc mips_arch_create {arch gprsize extends props as_flags objdump_flags
 137                        {default_for_targets {}}} {
 138     global mips_arches
 139
 140     if { [info exists mips_arches($arch)] } {
 141              error "mips_arch_create: arch \"$arch\" already exists"
 142     }
 143     if { $gprsize != 32 && $gprsize != 64 } {
 144         error "mips_arch_create: invalid GPR size $gprsize"
 145     }
 146
 147     set archdata(displayname) $arch
 148     set archdata(gprsize) $gprsize
 149     set archdata(as_flags) $as_flags
 150     set archdata(objdump_flags) $objdump_flags
 151     set archdata(props) $arch
 152     eval lappend archdata(props) $props
 153     if { [string length $extends] != 0 } {
 154         eval lappend archdata(props) [mips_arch_properties $extends 0]
 155     }
 156
 157     set mips_arches($arch) [array get archdata]
 158
 159     # Set as default if appropriate.
 160     foreach target $default_for_targets {
 161         if { [istarget $target] } {
 162             if { [info exists mips_arches(default)] } {
 163                 error "mips_arch_create: default arch already exists"
 164             }
 165
 166             set archdata(displayname) "default = $arch"
 167             set archdata(as_flags) ""
 168             set archdata(objdump_flags) ""
 169
 170             set mips_arches(default) [array get archdata]
 171             break
 172         }
 173     }
 174 }
 175
 176 # mips_arch_destroy ARCH
 177 #
 178 # The opposite of the above.  This function removes an entry from
 179 # the architecture data array, for the architecture or CPU named ARCH.
 180
 181 proc mips_arch_destroy {arch} {
 182     global mips_arches
 183
 184     if { [info exists mips_arches($arch)] } {
 185         unset mips_arches($arch)
 186     }
 187 }
 188
 189 # mips_arch_list_all
 190 #
 191 # This function returns the list of all names of entries in the
 192 # architecture data array (including the default entry, if a default
 193 # is known).
 194 proc mips_arch_list_all {} {
 195     global mips_arches
 196     return [lsort -dictionary [array names mips_arches]]
 197 }
 198
 199 # mips_arch_data ARCH
 200 #
 201 # This function returns the information associated with ARCH
 202 # in the architecture data array, in "array get" form.
 203 proc mips_arch_data {arch} {
 204     global mips_arches
 205
 206     if { ! [info exists mips_arches($arch)] } {
 207         error "mips_arch_data: unknown arch \"$arch\""
 208     }
 209     return $mips_arches($arch)
 210 }
 211
 212 # mips_arch_displayname ARCH
 213 #
 214 # This function returns the printable name associated with ARCH in
 215 # the architecture data array.
 216 proc mips_arch_displayname {arch} {
 217     array set archdata [mips_arch_data $arch]
 218     return $archdata(displayname)
 219 }
 220
 221 # mips_arch_properties ARCH (optional:) INCLUDE_GPRSIZE
 222 #
 223 # This function returns the property list associated with ARCH in the
 224 # architecture data array, including the "canonical" target name as the
 225 # first element.
 226 #
 227 # If INCLUDE_GPRSIZE is non-zero, an additional "gpr32" or "gpr64"
 228 # property will be returned as part of the list based on the
 229 # architecture's GPR size.
 230 proc mips_arch_properties {arch {include_gprsize 1}} {
 231     array set archdata [mips_arch_data $arch]
 232     set props $archdata(props)
 233     if { $include_gprsize } {
 234         lappend props gpr$archdata(gprsize)
 235     }
 236     return $props
 237 }
 238
 239 # mips_arch_as_flags ARCH
 240 #
 241 # This function returns the assembler flags associated with ARCH in
 242 # the architecture data array.
 243 proc mips_arch_as_flags {arch} {
 244     array set archdata [mips_arch_data $arch]
 245     return $archdata(as_flags)
 246 }
 247
 248 # mips_arch_objdump_flags ARCH
 249 #
 250 # This function returns the objdump disassembly flags associated with
 251 # ARCH in the architecture data array.
 252 proc mips_arch_objdump_flags {arch} {
 253     array set archdata [mips_arch_data $arch]
 254     return $archdata(objdump_flags)
 255 }
 256
 257 # mips_arch_matches ARCH PROPMATCHLIST
 258 #
 259 # This function returns non-zero if ARCH matches the set of properties
 260 # described by PROPMATCHLIST.  Each entry in PROPMATCHLIST can either
 261 # be the name of a property which must be matched, or "!" followed by
 262 # the name of a property which must not be matched.  ARCH matches
 263 # PROPMATCHLIST if and only if all of the conditions specified by
 264 # PROPMATCHLIST are satisfied.
 265 proc mips_arch_matches {arch propmatchlist} {
 266     foreach pm $propmatchlist {
 267         if { [string match {!*} $pm] } {
 268             # fail if present.
 269             set inverted 1
 270             set p [string range $pm 1 end]
 271         } {
 272             # fail if not present.
 273             set inverted 0
 274             set p $pm
 275         }
 276
 277         set loc [lsearch -exact [mips_arch_properties $arch] $p]
 278
 279         # required-absent and found, or required-present and not found: fail.
 280         if { ($inverted && $loc != -1) || (! $inverted && $loc == -1) } {
 281             return 0
 282         }
 283     }
 284     return 1
 285 }
 286
 287 # mips_arch_list_matching ARGS
 288 #
 289 # This function returns a list of all architectures which match
 290 # the conditions described by its arguments.  Its arguments are
 291 # taken as a list and used as the PROPMATCHLIST in a call to
 292 # "mips_arch_matches" for each known architecture.
 293 proc mips_arch_list_matching {args} {
 294     set l ""
 295     foreach arch [mips_arch_list_all] {
 296         # For now, don't match default arch until we know what its
 297         # properties actually are.
 298         if { [string compare $arch default] == 0
 299              && [string length [mips_arch_properties default]] == 0} {
 300             continue
 301         }
 302         if { [mips_arch_matches $arch $args] } {
 303             lappend l $arch
 304         }
 305     }
 306     return $l
 307 }
 308
 309
 310 # The functions below facilitate running various types of tests.
 311
 312 # run_dump_test_arch NAME OPTS ARCH
 313 #
 314 # Invoke "run_dump_test" for test NAME with additional assembler options OPTS.
 315 # Add the assembler and disassembler flags that are associated with
 316 # architecture ARCH.
 317 #
 318 # You can override the expected output for particular architectures
 319 # and file formats.  The possible test names are, in order of preference:
 320 #
 321 # 1. CARCH@FORMAT@NAME.d
 322 # 2. CARCH@NAME.d
 323 # 3. FORMAT@NAME.d
 324 # 4. NAME.d
 325 #
 326 # where CARCH is the "canonical" name of architecture ARCH as recorded
 327 # in its associated property list, and where FORMAT is the target's
 328 # file format (one of "elf", "ecoff" or "aout").
 329 proc run_dump_test_arch { name opts arch } {
 330     upvar elf elf ecoff ecoff aout aout
 331     global subdir srcdir
 332
 333     set format [expr { $elf ? "elf" : $ecoff ? "ecoff" : "aout" }]
 334     set proparch [lindex [mips_arch_properties $arch 0] 0]
 335     set prefixes [list ${proparch}@${format}@ ${proparch}@ ]
 336     if { [ string match "octeon*" $proparch ] && $proparch != "octeon" } {
 337       lappend prefixes octeon@
 338       lappend prefixes octeon@${format}@
 339     }
 340     lappend prefixes ${format}@
 341     foreach prefix ${prefixes} {
 342         set archname ${prefix}${name}
 343         if { [file exists "$srcdir/$subdir/${archname}.d"] } {
 344             set name $archname
 345             break
 346         }
 347     }
 348
 349     if [catch {run_dump_test $name \
 350                    "{name    {([concat $opts [mips_arch_displayname $arch]])}}
 351                     {objdump {[mips_arch_objdump_flags $arch]}}
 352                     {as      {[concat $opts [mips_arch_as_flags $arch]]}}"} rv] {
 353         perror "$rv"
 354         untested "$subdir/$name ($arch)"
 355     }
 356 }
 357
 358 # run_dump_test_arches NAME [OPTS] ARCH_LIST
 359 #
 360 # Invoke "run_dump_test_arch" for test NAME, for each architecture
 361 # listed in ARCH_LIST.  OPTS, if specified, is a list of additional
 362 # assembler options that should be used for all architectures.
 363 proc run_dump_test_arches { name args } {
 364     upvar elf elf ecoff ecoff aout aout
 365     set opts ""
 366     if { [llength $args] > 1 } {
 367         set opts [lindex $args 0]
 368         set args [lrange $args 1 end]
 369     }
 370     set arch_list [lindex $args 0]
 371     foreach arch $arch_list {
 372         run_dump_test_arch $name $opts $arch
 373     }
 374 }
 375
 376 # run_list_test_arch NAME OPTS ARCH
 377 #
 378 # Invoke "run_list_test" for test NAME with additional assembler options OPTS.
 379 # Add the assembler flags that are associated with architecture ARCH.
 380 proc run_list_test_arch { name opts arch } {
 381     global subdir
 382
 383     set testname "MIPS $name ([concat $opts [mips_arch_displayname $arch]])"
 384     if [catch {run_list_test \
 385                    $name \
 386                    [concat $opts [mips_arch_as_flags $arch]] \
 387                    $testname} rv] {
 388         perror "$rv"
 389         untested "$testname"
 390     }
 391 }
 392
 393 # run_list_test_arches NAME [OPTS] ARCH_LIST
 394 #
 395 # Invoke "run_list_test_arch" for test NAME, for each architecture listed
 396 # in ARCH_LIST.  OPTS, if specified, is a list of additional assembler
 397 # options that should be used for all architectures.
 398 proc run_list_test_arches { name args } {
 399     set opts ""
 400     if { [llength $args] > 1 } {
 401         set opts [lindex $args 0]
 402         set args [lrange $args 1 end]
 403     }
 404     set arch_list [lindex $args 0]
 405     foreach arch $arch_list {
 406         run_list_test_arch "$name" "$opts" "$arch"
 407     }
 408 }
 409
 410
 411 # Create the architecture data array by providing data for all
 412 # known architectures.
 413 #
 414 # Note that several targets pick default CPU based on ABI.  We
 415 # can't easily handle that; do NOT list those targets as defaulting
 416 # to any architecture.
 417 mips_arch_init
 418 mips_arch_create mips1  32      {}      {} \
 419                         { -march=mips1 -mtune=mips1 } { -mmips:3000 }
 420 mips_arch_create mips2  32      mips1   { gpr_ilocks } \
 421                         { -march=mips2 -mtune=mips2 } { -mmips:6000 }
 422 mips_arch_create mips3  64      mips2   { fpisa3 } \
 423                         { -march=mips3 -mtune=mips3 } { -mmips:4000 }
 424 mips_arch_create mips4  64      mips3   { fpisa4 } \
 425                         { -march=mips4 -mtune=mips4 } { -mmips:8000 }
 426 mips_arch_create mips5  64      mips4   { fpisa5 } \
 427                         { -march=mips5 -mtune=mips5 } { -mmips:mips5 }
 428 mips_arch_create mips32 32      mips2   {} \
 429                         { -march=mips32 -mtune=mips32 } { -mmips:isa32 } \
 430                         { mipsisa32-*-* mipsisa32el-*-* }
 431 mips_arch_create mips32r2 32    mips32  { fpisa3 fpisa4 fpisa5 ror } \
 432                         { -march=mips32r2 -mtune=mips32r2 } \
 433                         { -mmips:isa32r2 } \
 434                         { mipsisa32r2-*-* mipsisa32r2el-*-* }
 435 mips_arch_create mips64 64      mips5   { mips32 } \
 436                         { -march=mips64 -mtune=mips64 } { -mmips:isa64 } \
 437                         { mipsisa64-*-* mipsisa64el-*-* }
 438 mips_arch_create mips64r2 64    mips64  { mips32r2 ror } \
 439                         { -march=mips64r2 -mtune=mips64r2 } \
 440                         { -mmips:isa64r2 } \
 441                         { mipsisa64r2-*-* mipsisa64r2el-*-* }
 442 mips_arch_create mips16 32      {}      {} \
 443                         { -march=mips1 -mips16 } { -mmips:16 }
 444 mips_arch_create micromips 64   mips64r2 {} \
 445                         { -march=mips64 -mmicromips } {}
 446 mips_arch_create r3000  32      mips1   {} \
 447                         { -march=r3000 -mtune=r3000 } { -mmips:3000 }
 448 mips_arch_create r3900  32      mips1   { gpr_ilocks } \
 449                         { -march=r3900 -mtune=r3900 } { -mmips:3900 } \
 450                         { mipstx39-*-* mipstx39el-*-* }
 451 mips_arch_create r4000  64      mips3   {} \
 452                         { -march=r4000 -mtune=r4000 } { -mmips:4000 }
 453 mips_arch_create vr5400 64      mips4   { ror } \
 454                         { -march=vr5400 -mtune=vr5400 } { -mmips:5400 }
 455 mips_arch_create sb1    64      mips64  { mips3d } \
 456                         { -march=sb1 -mtune=sb1 } { -mmips:sb1 } \
 457                         { mipsisa64sb1-*-* mipsisa64sb1el-*-* }
 458 mips_arch_create octeon 64      mips64r2 {} \
 459                         { -march=octeon -mtune=octeon } { -mmips:octeon } \
 460                         { mips64octeon*-*-* }
 461 mips_arch_create octeonp 64     octeon {} \
 462                         { -march=octeon+ -mtune=octeon+ } { -mmips:octeon+ } \
 463                         { }
 464 mips_arch_create octeon2 64     octeonp {} \
 465                         { -march=octeon2 -mtune=octeon2 } { -mmips:octeon2 } \
 466                         { }
 467 mips_arch_create xlr    64      mips64  {} \
 468                         { -march=xlr -mtune=xlr } { -mmips:xlr }
 469 mips_arch_create r5900  64      mips3   { gpr_ilocks singlefloat nollsc } \
 470                         { -march=r5900 -mtune=r5900 } { -mmips:5900 } \
 471                         { mipsr5900el-*-* mips64r5900el-*-* }
 472
 473 #
 474 # And now begin the actual tests!  VxWorks uses RELA rather than REL
 475 # relocations, so most of the generic dump tests will not work there.
 476 #
 477 if { [istarget mips*-*-vxworks*] } {
 478     run_dump_test "vxworks1"
 479     run_dump_test "vxworks1-xgot"
 480     run_dump_test "vxworks1-el"
 481     run_dump_test "vxworks1-xgot-el"
 482 } elseif { [istarget mips*-*-*] } {
 483     set elf [expr [istarget *-*-elf*] || [istarget *-*-irix5*] || [istarget *-*-irix6* ] || [istarget *-*-linux*] || [istarget *-*-netbsd*] ]
 484     set ecoff [expr [istarget *-*-ecoff*] || [istarget *-*-ultrix*] || [istarget *-*-irix\[1-4\]*] ]
 485     set aout [expr [istarget *-*-bsd*] || [istarget *-*-openbsd*] ]
 486     set addr32 [expr [istarget mipstx39*-*-*] || [istarget mips-*-linux*] || [istarget mipsel-*-linux*] || [istarget mips*-*-ecoff]]
 487     set has_newabi [expr [istarget *-*-irix6*] || [istarget mips*-*-linux*] || [istarget mips*-sde-elf*]]
 488     set no_mips16 [expr !$elf]
 489     set no_micromips [expr !$elf]
 490
 491     if { [istarget "mips*-*-*linux*"] || [istarget "mips*-sde-elf*"] } then {
 492         set tmips "t"
 493     } else {
 494         set tmips ""
 495     }
 496     if [istarget mips*el-*-*] {
 497         set el "el"
 498     } {
 499         set el ""
 500     }
 501     if { $no_mips16 } {
 502         mips_arch_destroy mips16
 503     }
 504     if { $no_micromips } {
 505         mips_arch_destroy micromips
 506     }
 507
 508     run_dump_test_arches "dot-1"        [mips_arch_list_matching mips1]
 509     run_dump_test_arches "abs"          [mips_arch_list_matching mips1]
 510     run_dump_test_arches "add"          [mips_arch_list_matching mips1]
 511     run_dump_test_arches "and"          [mips_arch_list_matching mips1]
 512     run_dump_test_arches "mips1-fp"     [mips_arch_list_matching mips1]
 513     run_list_test_arches "mips1-fp" "-32 -msoft-float" \
 514                                         [mips_arch_list_matching mips1]
 515     run_dump_test "break20"
 516     run_dump_test "trap20"
 517
 518     # LOSE: As of 2002-02-08, "beq" through "bltu" fail for target mips-ecoff.
 519     # See http://sources.redhat.com/ml/binutils/2001-10/msg00418.html for
 520     # more information.  Not sure if the fixes there are correct; should
 521     # branches to external labels be allowed for ECOFF?
 522     run_dump_test_arches "beq"          [mips_arch_list_matching mips1]
 523     run_dump_test_arches "bge"          [mips_arch_list_matching mips1]
 524     run_dump_test_arches "bgeu"         [mips_arch_list_matching mips1]
 525     run_dump_test_arches "blt"          [mips_arch_list_matching mips1]
 526     run_dump_test_arches "bltu"         [mips_arch_list_matching mips1]
 527     run_dump_test_arches "branch-likely" [mips_arch_list_matching mips2]
 528     run_dump_test_arches "branch-misc-1" [mips_arch_list_matching mips1]
 529     run_dump_test_arches "branch-misc-2" [mips_arch_list_matching mips1]
 530     run_dump_test_arches "branch-misc-2pic" [mips_arch_list_matching mips1]
 531     run_dump_test_arches "branch-misc-2-64" [mips_arch_list_matching mips3]
 532     run_dump_test_arches "branch-misc-2pic-64" [mips_arch_list_matching mips3]
 533     run_dump_test "branch-misc-3"
 534     run_dump_test "branch-swap"
 535
 536     if $elf {
 537         # Sweep a range of branch offsets so that it hits a position where
 538         # it is at the beginning of a frag and then swapped with a 16-bit
 539         # instruction from the preceding frag.  The offset will be somewhere
 540         # close below 4096 as this is the default obstack size limit that
 541         # we use and some space will have been already consumed.  The exact
 542         # amount depends on the host's programming model.
 543         for { set count 960 } { $count <= 1024 } { incr count } {
 544             run_list_test "branch-swap-2" "--defsym count=$count" \
 545                 "MIPS branch swapping ($count)"
 546         }
 547     }
 548
 549     run_dump_test "div"
 550
 551     if { !$addr32 } {
 552         run_dump_test_arches "dli"              [mips_arch_list_matching mips3]
 553     }
 554     if $elf {
 555         run_dump_test_arches "elf-jal"  [mips_arch_list_matching mips1]
 556     } else {
 557         run_dump_test "jal"
 558     }
 559     run_dump_test_arches "jal-mask-11"  [mips_arch_list_matching mips1]
 560     run_dump_test_arches "jal-mask-12"  [mips_arch_list_matching mips1]
 561     run_dump_test_arches "jal-mask-21"  [mips_arch_list_matching micromips]
 562     run_dump_test_arches "jal-mask-22"  [mips_arch_list_matching micromips]
 563     run_dump_test "eret-1"
 564     run_dump_test "eret-2"
 565     run_dump_test "eret-3"
 566     run_dump_test_arches "24k-branch-delay-1" \
 567                                         [mips_arch_list_matching mips1]
 568     run_dump_test_arches "24k-triple-stores-1" \
 569                                 [mips_arch_list_matching fpisa5 !octeon]
 570     run_dump_test_arches "24k-triple-stores-2" \
 571                                         [mips_arch_list_matching mips2]
 572     run_dump_test_arches "24k-triple-stores-2-llsc" \
 573                                         [mips_arch_list_matching mips2 !nollsc]
 574     run_dump_test_arches "24k-triple-stores-3" \
 575                                         [mips_arch_list_matching mips2]
 576     run_dump_test_arches "24k-triple-stores-4" \
 577                                         [mips_arch_list_matching mips2 !singlefloat]
 578     run_dump_test_arches "24k-triple-stores-5" \
 579                                         [mips_arch_list_matching mips1]
 580     run_dump_test_arches "24k-triple-stores-6" \
 581                                         [mips_arch_list_matching mips2 !singlefloat]
 582     run_dump_test_arches "24k-triple-stores-7" \
 583                                         [mips_arch_list_matching mips2 !singlefloat]
 584     run_dump_test_arches "24k-triple-stores-8" \
 585                                         [mips_arch_list_matching mips1]
 586     run_dump_test_arches "24k-triple-stores-9" \
 587                                         [mips_arch_list_matching mips1]
 588     run_dump_test_arches "24k-triple-stores-10" \
 589                                         [mips_arch_list_matching mips1]
 590     if $elf {
 591         run_dump_test_arches "24k-triple-stores-11" \
 592                                         [mips_arch_list_matching mips1]
 593     }
 594
 595     if $elf {
 596         run_dump_test_arches "jal-svr4pic" \
 597                                         [mips_arch_list_matching mips1]
 598         run_dump_test_arches "jal-svr4pic-noreorder" \
 599                                         [mips_arch_list_matching mips1]
 600     }
 601     if $elf { run_dump_test "jal-xgot" }
 602     run_list_test_arches "jal-range" "-32" [mips_arch_list_matching mips1]
 603     if $has_newabi { run_dump_test "jal-newabi" }
 604     if !$aout { run_dump_test "la" }
 605     if $elf { run_dump_test "la-svr4pic" }
 606     if $elf { run_dump_test "la-xgot" }
 607     if $elf { run_dump_test "lca-svr4pic" }
 608     if $elf { run_dump_test "lca-xgot" }
 609     if !$aout {
 610         # XXX FIXME: Has mips2 and later insns with mips1 disassemblies.
 611         # (Should split and then use appropriate arch lists.)
 612         run_dump_test_arches "lb"       [mips_arch_list_matching mips1 !mips2]
 613     }
 614     if $elf {
 615         run_dump_test_arches "lb-svr4pic" \
 616                                 [mips_arch_list_matching mips1 !gpr_ilocks]
 617         run_dump_test_arches "lb-svr4pic-ilocks" [mips_arch_list_matching gpr_ilocks]
 618     }
 619     if $elf {
 620         # Both versions specify the cpu, so we can run both regardless of
 621         # the interlocking in the configured default cpu.
 622         run_dump_test "lb-xgot"
 623         run_dump_test "lb-xgot-ilocks"
 624     }
 625     if !$aout {
 626         run_dump_test_arches "ld"       [mips_arch_list_matching mips1]
 627         run_dump_test_arches "ld-forward" \
 628                                         [mips_arch_list_matching mips1]
 629         run_dump_test_arches "sd"       [mips_arch_list_matching mips1]
 630         run_dump_test_arches "sd-forward" \
 631                                         [mips_arch_list_matching mips1]
 632         run_dump_test_arches "l_d"      [mips_arch_list_matching mips1 !singlefloat]
 633         if $elf {
 634             run_dump_test_arches "l_d-single"   [mips_arch_list_matching mips1 singlefloat]
 635         }
 636         run_dump_test_arches "l_d-forward" \
 637                                         [mips_arch_list_matching mips1 !singlefloat]
 638         run_dump_test_arches "s_d"      [mips_arch_list_matching mips1 !singlefloat]
 639         if $elf {
 640             run_dump_test_arches "s_d-single"   [mips_arch_list_matching mips1 singlefloat]
 641         }
 642         run_dump_test_arches "s_d-forward" \
 643                                         [mips_arch_list_matching mips1 !singlefloat]
 644         run_dump_test_arches "ldc1"     [mips_arch_list_matching mips2 !singlefloat]
 645         run_dump_test_arches "ldc1-forward" \
 646                                         [mips_arch_list_matching mips2 !singlefloat]
 647         run_dump_test_arches "sdc1"     [mips_arch_list_matching mips2 !singlefloat]
 648         run_dump_test_arches "sdc1-forward" \
 649                                         [mips_arch_list_matching mips2 !singlefloat]
 650         if $has_newabi {
 651             run_dump_test_arches "ld-n32" \
 652                                         [mips_arch_list_matching mips3]
 653             run_dump_test_arches "ld-forward-n32" \
 654                                         [mips_arch_list_matching mips3]
 655             run_dump_test_arches "sd-n32" \
 656                                         [mips_arch_list_matching mips3]
 657             run_dump_test_arches "sd-forward-n32" \
 658                                         [mips_arch_list_matching mips3]
 659             run_dump_test_arches "l_d-n32" \
 660                                         [mips_arch_list_matching mips3 !singlefloat]
 661             run_dump_test_arches "l_d-forward-n32" \
 662                                         [mips_arch_list_matching mips3 !singlefloat]
 663             run_dump_test_arches "s_d-n32" \
 664                                         [mips_arch_list_matching mips3 !singlefloat]
 665             run_dump_test_arches "s_d-forward-n32" \
 666                                         [mips_arch_list_matching mips3 !singlefloat]
 667             run_dump_test_arches "ldc1-n32" \
 668                                         [mips_arch_list_matching mips3 !singlefloat]
 669             run_dump_test_arches "ldc1-forward-n32" \
 670                                         [mips_arch_list_matching mips3 !singlefloat]
 671             run_dump_test_arches "sdc1-n32" \
 672                                         [mips_arch_list_matching mips3 !singlefloat]
 673             run_dump_test_arches "sdc1-forward-n32" \
 674                                         [mips_arch_list_matching mips3 !singlefloat]
 675             run_dump_test_arches "ld-n64" \
 676                                         [mips_arch_list_matching mips3]
 677             run_dump_test_arches "ld-forward-n64" \
 678                                         [mips_arch_list_matching mips3]
 679             run_dump_test_arches "sd-n64" \
 680                                         [mips_arch_list_matching mips3]
 681             run_dump_test_arches "sd-forward-n64" \
 682                                         [mips_arch_list_matching mips3]
 683             run_dump_test_arches "l_d-n64" \
 684                                         [mips_arch_list_matching mips3 !singlefloat]
 685             run_dump_test_arches "l_d-forward-n64" \
 686                                         [mips_arch_list_matching mips3 !singlefloat]
 687             run_dump_test_arches "s_d-n64" \
 688                                         [mips_arch_list_matching mips3 !singlefloat]
 689             run_dump_test_arches "s_d-forward-n64" \
 690                                         [mips_arch_list_matching mips3 !singlefloat]
 691             run_dump_test_arches "ldc1-n64" \
 692                                         [mips_arch_list_matching mips3 !singlefloat]
 693             run_dump_test_arches "ldc1-forward-n64" \
 694                                         [mips_arch_list_matching mips3 !singlefloat]
 695             run_dump_test_arches "sdc1-n64" \
 696                                         [mips_arch_list_matching mips3 !singlefloat]
 697             run_dump_test_arches "sdc1-forward-n64" \
 698                                         [mips_arch_list_matching mips3 !singlefloat]
 699         }
 700     }
 701     run_dump_test_arches "ld-zero"      [mips_arch_list_matching mips1]
 702     run_dump_test_arches "ld-zero-2"    [mips_arch_list_matching mips2 !nollsc]
 703     run_dump_test_arches "ld-zero-3"    [mips_arch_list_matching mips3 !nollsc]
 704     run_dump_test_arches "ld-zero-u"    [mips_arch_list_matching micromips]
 705     run_dump_test_arches "ld-zero-q"    [mips_arch_list_matching r5900]
 706     if $elf { run_dump_test "ld-svr4pic" }
 707     if $elf { run_dump_test "ld-xgot" }
 708     run_dump_test_arches "li"           [mips_arch_list_matching mips1]
 709     if !$aout { run_dump_test "lifloat" }
 710     if $elf { run_dump_test "lif-svr4pic" }
 711     if $elf { run_dump_test "lif-xgot" }
 712     run_dump_test_arches "mips4"        [mips_arch_list_matching mips4]
 713     run_dump_test_arches "mips4-fp" "-32" \
 714                                         [mips_arch_list_matching fpisa4]
 715     run_dump_test_arches "mips4-fp" "-mabi=o64" \
 716                                         [mips_arch_list_matching fpisa4 gpr64]
 717     run_list_test_arches "mips4-fp" "-32 -msoft-float" \
 718                                         [mips_arch_list_matching fpisa4]
 719     run_dump_test_arches "mips4-branch-likely" \
 720                                         [mips_arch_list_matching mips4]
 721     run_list_test_arches "mips4-branch-likely" "-32 -msoft-float" \
 722                                         [mips_arch_list_matching mips4]
 723     run_dump_test_arches "mips5-fp" "-32" \
 724                                         [mips_arch_list_matching fpisa5]
 725     run_dump_test_arches "mips5-fp" "-mabi=o64" \
 726                                         [mips_arch_list_matching fpisa5 gpr64]
 727     run_dump_test "mul"
 728
 729     run_dump_test_arches "rol"          [mips_arch_list_matching mips1 !ror]
 730     run_dump_test_arches "rol-hw"       [mips_arch_list_matching ror]
 731
 732     run_dump_test_arches "rol64"        [mips_arch_list_matching gpr64 !ror]
 733     run_dump_test_arches "rol64-hw"     [mips_arch_list_matching gpr64 ror]
 734
 735     if !$aout { run_dump_test "sb" }
 736     run_dump_test "trunc"
 737     if !$aout { run_dump_test "ulh" }
 738     run_dump_test_arches "ulh2-eb"      [mips_arch_list_matching mips1]
 739     run_dump_test_arches "ulh2-el"      [mips_arch_list_matching mips1]
 740     if $elf { run_dump_test "ulh-svr4pic" }
 741     if $elf { run_dump_test "ulh-xgot" }
 742     if !$aout {
 743         run_dump_test "ulw"
 744         run_dump_test "uld"
 745         run_dump_test "ush"
 746         run_dump_test "usw"
 747         run_dump_test "usd"
 748     }
 749     run_dump_test_arches "ulw2-eb" \
 750                                 [mips_arch_list_matching mips1 !gpr_ilocks]
 751     run_dump_test_arches "ulw2-eb-ilocks" [mips_arch_list_matching gpr_ilocks]
 752     run_dump_test_arches "ulw2-el" \
 753                                 [mips_arch_list_matching mips1 !gpr_ilocks]
 754     run_dump_test_arches "ulw2-el-ilocks" [mips_arch_list_matching gpr_ilocks]
 755
 756     run_dump_test_arches "uld2-eb" [mips_arch_list_matching mips3]
 757     run_dump_test_arches "uld2-el" [mips_arch_list_matching mips3]
 758
 759     # The mips16 test can only be run on ELF, because only ELF
 760     # supports the necessary mips16 reloc.
 761     if { $elf && !$no_mips16 } {
 762         run_dump_test "mips16"
 763         run_dump_test "mips16-64"
 764         # Check MIPS16e extensions
 765         run_dump_test_arches "mips16e" \
 766                                 [mips_arch_list_matching mips32 !micromips]
 767         # Check jalx handling
 768         run_dump_test "mips16-jalx"
 769         run_dump_test "mips-jalx"
 770         run_dump_test "mips-jalx-2"
 771         # Check MIPS16 HI16/LO16 relocations
 772         run_dump_test "mips16-hilo"
 773         if $has_newabi {
 774             run_dump_test "mips16-hilo-n32"
 775         }
 776         run_dump_test "mips16-hilo-match"
 777     }
 778     run_dump_test "delay"
 779     run_dump_test "nodelay"
 780     run_dump_test "mips4010"
 781     run_dump_test "mips4650"
 782     run_dump_test "mips4100"
 783     run_dump_test "vr4111"
 784     run_dump_test "vr4120"
 785     run_dump_test "vr4120-2"
 786     run_dump_test "vr4130"
 787     run_dump_test "vr5400"
 788     run_dump_test "vr5500"
 789     run_dump_test "rm7000"
 790     run_dump_test "perfcount"
 791     run_dump_test "lineno"
 792     run_dump_test "sync"
 793
 794     run_dump_test_arches "virt" [mips_arch_list_matching mips32r2]
 795     run_dump_test_arches "virt64"       [mips_arch_list_matching mips64r2]
 796
 797     run_dump_test_arches "mips32"       [mips_arch_list_matching mips32]
 798     run_dump_test_arches "mips32-imm"   [mips_arch_list_matching mips32]
 799
 800     run_dump_test_arches "mips32-sf32"  [mips_arch_list_matching mips32]
 801     run_list_test_arches "mips32-sf32" "-32 -msoft-float" \
 802                                         [mips_arch_list_matching mips32]
 803     run_dump_test_arches "mips32-cp2"   [mips_arch_list_matching mips32 \
 804                                             !octeon]
 805
 806     run_dump_test_arches "mips32r2"     [mips_arch_list_matching mips32r2]
 807     run_dump_test_arches "mips32r2-cp2" [mips_arch_list_matching mips32r2 \
 808                                             !octeon]
 809     run_dump_test_arches "mips32r2-fp32" \
 810                                         [mips_arch_list_matching mips32r2]
 811     run_list_test_arches "mips32r2-fp32" "-32 -msoft-float" \
 812                                         [mips_arch_list_matching mips32r2]
 813     run_list_test_arches "mips32r2-ill" "-32" \
 814                         [mips_arch_list_matching mips32r2 gpr32]
 815     run_list_test_arches "mips32r2-ill-fp64" "-mabi=o64" \
 816                         [mips_arch_list_matching mips32r2 gpr64]
 817     run_list_test_arches "mips32r2-ill-nofp" "-32 -msoft-float" \
 818                         [mips_arch_list_matching mips32r2]
 819
 820     run_dump_test_arches "mips64"       [mips_arch_list_matching mips64]
 821     run_dump_test_arches "mips64-cp2"   [mips_arch_list_matching mips64 \
 822                                             !octeon]
 823
 824     run_dump_test_arches "mips64r2"     [mips_arch_list_matching mips64r2]
 825     run_list_test_arches "mips64r2-ill" [mips_arch_list_matching mips64r2]
 826
 827     run_dump_test "set-arch"
 828
 829     if { !$addr32 } {
 830         run_dump_test "mips64-mips3d"
 831         run_dump_test_arches "mips64-mips3d-incl" [mips_arch_list_matching mips3d]
 832
 833         run_dump_test "mips64-mdmx"
 834         run_dump_test "sb1-ext-mdmx"
 835         run_dump_test "sb1-ext-ps"
 836         run_dump_test "xlr-ext"
 837     }
 838
 839     run_dump_test_arches "relax"        [mips_arch_list_matching mips2]
 840     run_dump_test_arches "relax-at"     [mips_arch_list_matching mips2]
 841     run_dump_test "relax-swap1-mips1"
 842     run_dump_test "relax-swap1-mips2"
 843     run_dump_test "relax-swap2"
 844     run_dump_test_arches "relax-swap3"  [mips_arch_list_all]
 845     run_list_test_arches "relax-bc1any" "-mips3d -relax-branch" \
 846                                         [mips_arch_list_matching mips64 \
 847                                             !micromips]
 848     run_list_test_arches "relax-bposge" "-mdsp -relax-branch" \
 849                                         [mips_arch_list_matching mips64r2 \
 850                                             !micromips]
 851
 852     run_list_test "illegal" "-32"
 853     run_list_test "baddata1" "-32"
 854     run_list_test "jalr" ""
 855
 856     # LOSE: As of 2002-02-08, the next 4 tests fail for target mips-ecoff.
 857     # It's unknown whether they _should_ pass as-is, or whether different
 858     # variants are needed for ELF and ECOFF.
 859     run_dump_test "mips-gp32-fp32"
 860     run_dump_test "mips-gp32-fp64"
 861     run_dump_test "mips-gp64-fp32"
 862     run_dump_test "mips-gp64-fp64"
 863
 864     if $elf {
 865         # Make sure that -mcpu=FOO and -mFOO are equivalent.  Assemble a file
 866         # containing 4650-specific instructions with -m4650 and -mcpu=4650,
 867         # and verify that they're the same.  Specifically, we're checking
 868         # that the EF_MIPS_MACH field is set, and that the 4650 'mul'
 869         # instruction does get used.  In previous versions of GAS,
 870         # only -mcpu=4650 would set the EF_MIPS_MACH field; -m4650 wouldn't.
 871         run_dump_test "elf_e_flags1"
 872         run_dump_test "elf_e_flags2"
 873         run_dump_test "elf_e_flags3"
 874         run_dump_test "elf_e_flags4"
 875
 876         # Check EF_MIPS_ARCH markings for each supported architecture.
 877         run_dump_test "elf_arch_mips1"
 878         run_dump_test "elf_arch_mips2"
 879         run_dump_test "elf_arch_mips3"
 880         run_dump_test "elf_arch_mips4"
 881         run_dump_test "elf_arch_mips5"
 882         run_dump_test "elf_arch_mips32"
 883         run_dump_test "elf_arch_mips32r2"
 884         run_dump_test "elf_arch_mips64"
 885         run_dump_test "elf_arch_mips64r2"
 886
 887         # Verify that ASE markings are handled properly.
 888         if { !$no_mips16 } {
 889             run_dump_test "elf_ase_mips16"
 890             run_dump_test "elf_ase_mips16-2"
 891         }
 892         if { !$no_micromips } {
 893             run_dump_test "elf_ase_micromips"
 894             run_dump_test "elf_ase_micromips-2"
 895         }
 896
 897         run_dump_test "mips-gp32-fp32-pic"
 898         run_dump_test "mips-gp32-fp64-pic"
 899         run_dump_test "mips-gp64-fp32-pic"
 900         run_dump_test "mips-gp64-fp64-pic"
 901
 902         run_dump_test "mips-abi32"
 903         run_dump_test "mips-abi32-pic"
 904         run_dump_test "mips-abi32-pic2"
 905
 906         run_dump_test "elf${el}-rel"
 907         run_dump_test_arches "elf${el}-rel2" [mips_arch_list_matching gpr64 !singlefloat]
 908         run_dump_test "e32${el}-rel2"
 909         run_dump_test "elf${el}-rel3"
 910         run_dump_test_arches "elf-rel4" [mips_arch_list_matching gpr64]
 911         run_dump_test "e32-rel4"
 912         run_dump_test "elf-rel5"
 913         run_dump_test "elf-rel6"
 914         if $has_newabi {
 915             run_dump_test "elf-rel6-n32"
 916             run_dump_test "elf-rel6-n64"
 917         }
 918         run_dump_test "elf-rel7"
 919         run_dump_test "elf-rel8"
 920         run_dump_test "elf-rel8-mips16"
 921         run_dump_test "elf-rel9"
 922         run_dump_test "elf-rel9-mips16"
 923         if $has_newabi {
 924             run_dump_test "elf-rel10"
 925             run_dump_test "elf-rel11"
 926         }
 927         run_dump_test "elf-rel12"
 928         run_dump_test "elf-rel13"
 929         run_dump_test "elf-rel13-mips16"
 930         run_dump_test "elf-rel14"
 931
 932         if $has_newabi {
 933             run_dump_test "elf-rel15"
 934             run_dump_test "elf-rel16"
 935
 936             run_dump_test "elf-rel-got-n32"
 937             run_dump_test "elf-rel-xgot-n32"
 938             run_dump_test "elf-rel-got-n64"
 939             run_dump_test "elf-rel-xgot-n64"
 940         }
 941         run_dump_test "elf-rel17"
 942         if $has_newabi {
 943             run_dump_test "elf-rel18"
 944         }
 945         run_dump_test "elf-rel19"
 946         run_dump_test "elf-rel20"
 947         if $has_newabi {
 948             run_dump_test "elf-rel21"
 949             run_dump_test "elf-rel22"
 950             run_dump_test "elf-rel23"
 951             run_dump_test "elf-rel23a"
 952             run_dump_test "elf-rel23b"
 953             run_dump_test "elf-rel24"
 954         }
 955
 956         run_dump_test "elf-rel25"
 957         run_dump_test "elf-rel25a"
 958         run_dump_test "elf-rel26"
 959
 960         run_dump_test_arches "elf-rel27" [mips_arch_list_all]
 961
 962         if $has_newabi {
 963             run_dump_test "elf-rel28-n32"
 964             run_dump_test "elf-rel28-n64"
 965             run_dump_test_arches "elf-rel29" [mips_arch_list_matching mips3]
 966         }
 967         run_list_test_arches "elf-rel30" "-32" [mips_arch_list_all]
 968
 969         if { !$no_mips16 } {
 970             run_dump_test "${tmips}mips${el}16-e"
 971             run_dump_test "${tmips}mips${el}16-f"
 972         }
 973         run_dump_test "elf-consthilo"
 974         run_dump_test "expr1"
 975
 976         run_list_test "tls-ill" "-32"
 977         run_dump_test "tls-o32"
 978         run_dump_test "tls-relw"
 979         run_dump_test "jalr2"
 980         run_dump_test_arches "jalr3"    [mips_arch_list_matching mips1 \
 981                                             !micromips]
 982         if $has_newabi {
 983             run_dump_test_arches "jalr3-n32" \
 984                                         [mips_arch_list_matching mips3 \
 985                                             !micromips]
 986             run_dump_test_arches "jalr3-n64" \
 987                                         [mips_arch_list_matching mips3 \
 988                                             !micromips]
 989         }
 990
 991         run_dump_test_arches "aent"     [mips_arch_list_matching mips1]
 992
 993         run_dump_test_arches "branch-misc-4" \
 994                                         [mips_arch_list_matching mips1]
 995         run_dump_test_arches "branch-misc-4-64" \
 996                                         [mips_arch_list_matching mips3]
 997
 998         run_dump_test_arches "loc-swap" [mips_arch_list_all]
 999         run_dump_test_arches "loc-swap-dis" \
1000                                         [mips_arch_list_all]
1001         run_dump_test_arches "loc-swap-2" [mips_arch_list_all]
1002     }
1003
1004     if $has_newabi {
1005         run_dump_test "n32-consec"
1006     }
1007
1008     # tests of objdump's ability to disassemble using different
1009     # register names.
1010     run_dump_test "gpr-names-numeric"
1011     run_dump_test "gpr-names-32"
1012     run_dump_test "gpr-names-n32"
1013     run_dump_test "gpr-names-64"
1014
1015     run_dump_test "fpr-names-numeric"
1016     run_dump_test "fpr-names-32"
1017     run_dump_test "fpr-names-n32"
1018     run_dump_test "fpr-names-64"
1019
1020     run_dump_test "cp0-names-numeric"
1021     run_dump_test "cp0-names-r3000"
1022     run_dump_test "cp0-names-r4000" \
1023                   { { {name} {(r4000)} } { {objdump} {-M cp0-names=r4000} } }
1024     run_dump_test "cp0-names-r4000" \
1025                   { { {name} {(r4400)} } { {objdump} {-M cp0-names=r4400} } }
1026     run_dump_test "cp0-names-mips32"
1027     run_dump_test "cp0-names-mips32r2"
1028     run_dump_test "cp0-names-mips64"
1029     run_dump_test "cp0-names-mips64r2"
1030     run_dump_test "cp0-names-sb1"
1031
1032     run_dump_test "cp0sel-names-numeric"
1033     run_dump_test "cp0sel-names-mips32"
1034     run_dump_test "cp0sel-names-mips32r2"
1035     run_dump_test "cp0sel-names-mips64"
1036     run_dump_test "cp0sel-names-mips64r2"
1037     run_dump_test "cp0sel-names-sb1"
1038
1039     run_dump_test "hwr-names-numeric"
1040     run_dump_test "hwr-names-mips32r2"
1041     run_dump_test "hwr-names-mips64r2"
1042
1043     run_dump_test "ldstla-32"
1044     run_dump_test "ldstla-32-mips3"
1045     run_dump_test "ldstla-32-shared"
1046     run_dump_test "ldstla-32-mips3-shared"
1047     run_list_test "ldstla-32-1" "-mabi=32" \
1048         "MIPS ld-st-la bad constants (ABI o32)"
1049     run_list_test "ldstla-32-mips3-1" "-mabi=32" \
1050         "MIPS ld-st-la bad constants (ABI o32, mips3)"
1051     run_list_test "ldstla-32-1" "-KPIC -mabi=32" \
1052         "MIPS ld-st-la bad constants (ABI o32, shared)"
1053     run_list_test "ldstla-32-mips3-1" "-KPIC -mabi=32" \
1054         "MIPS ld-st-la bad constants (ABI o32, mips3, shared)"
1055     run_dump_test "ldstla-eabi64"
1056     if $has_newabi {
1057         run_dump_test "ldstla-n64"
1058         run_dump_test "ldstla-n64-shared"
1059         run_dump_test "ldstla-n64-sym32"
1060     }
1061
1062     run_dump_test "macro-warn-1"
1063     run_dump_test "macro-warn-2"
1064     run_dump_test "macro-warn-3"
1065     run_dump_test "macro-warn-4"
1066     if $has_newabi {
1067         run_dump_test "macro-warn-1-n32"
1068         run_dump_test "macro-warn-2-n32"
1069     }
1070
1071     run_dump_test "noat-1"
1072     run_list_test "noat-2" ""
1073     run_list_test "noat-3" ""
1074     run_list_test "noat-4" ""
1075     run_list_test "noat-5" ""
1076     run_list_test "noat-6" ""
1077     run_list_test "noat-7" ""
1078
1079     run_dump_test "at-1"
1080     run_list_test "at-2" "-32 -mips1" "MIPS at-2"
1081
1082     run_dump_test "loongson-2e"
1083     run_dump_test "loongson-2f"
1084     run_dump_test "loongson-2f-2"
1085     run_dump_test "loongson-2f-3"
1086
1087     run_dump_test "loongson-3a"
1088     run_dump_test "loongson-3a-2"
1089     run_dump_test "loongson-3a-3"
1090
1091     run_dump_test_arches "octeon"       [mips_arch_list_matching octeon]
1092     run_dump_test_arches "octeon-saa-saad" [mips_arch_list_matching octeonp]
1093     run_list_test_arches "octeon-ill"   [mips_arch_list_matching octeon]
1094     run_dump_test_arches "octeon-pref"  [mips_arch_list_matching octeon]
1095     run_dump_test_arches "octeon2"      [mips_arch_list_matching octeon2]
1096
1097     run_dump_test "smartmips"
1098     run_dump_test_arches "mips32-dsp"   [mips_arch_list_matching mips32r2 \
1099                                             !octeon]
1100     run_dump_test_arches "mips32-dspr2" [mips_arch_list_matching mips32r2 \
1101                                             !octeon]
1102     run_dump_test "mips64-dsp"
1103     run_dump_test "mips32-mt"
1104
1105     if { $elf && !$no_mips16 } {
1106         run_dump_test "mips16-dwarf2"
1107         if $has_newabi {
1108             run_dump_test "mips16-dwarf2-n32"
1109         }
1110         run_dump_test "mips16-stabs"
1111     }
1112     if { !$no_mips16 } {
1113         run_dump_test "mips16e-jrc"
1114         run_dump_test "mips16e-save"
1115         run_dump_test "mips16e-64"
1116         run_list_test "mips16e-64" "-march=mips32 -32"
1117         run_dump_test "mips16-intermix"
1118     }
1119     run_dump_test "vxworks1"
1120     run_dump_test "vxworks1-xgot"
1121     run_dump_test "vxworks1-el"
1122     run_dump_test "vxworks1-xgot-el"
1123
1124     run_dump_test "noreorder"
1125     run_dump_test "align"
1126     run_dump_test "align2"
1127     run_dump_test "align2-el"
1128     run_dump_test "align3"
1129     run_dump_test "odd-float"
1130     run_dump_test "ehword"
1131
1132     run_list_test_arches "mips-macro-ill-sfp" "-32 -msingle-float" \
1133                                         [mips_arch_list_matching mips2]
1134     run_list_test_arches "mips-macro-ill-nofp" "-32 -msoft-float" \
1135                                         [mips_arch_list_matching mips2]
1136
1137     run_list_test_arches "mips-hard-float-flag" \
1138         "-32 -msoft-float -mhard-float" \
1139                                         [mips_arch_list_matching mips1 !singlefloat]
1140     run_list_test_arches "mips-double-float-flag" \
1141         "-32 -msingle-float -mdouble-float" \
1142                                         [mips_arch_list_matching mips1 !singlefloat]
1143
1144     run_dump_test "mips16-vis-1"
1145     run_dump_test "call-nonpic-1"
1146     run_dump_test "mips32-sync"
1147     run_dump_test_arches "mips32r2-sync" \
1148                                         [mips_arch_list_matching mips32r2]
1149     run_dump_test_arches "alnv_ps-swap" [mips_arch_list_matching fpisa5]
1150     run_dump_test_arches "cache" [lsort -dictionary -unique [concat \
1151                                         [mips_arch_list_matching mips3] \
1152                                         [mips_arch_list_matching mips32] ] ]
1153     run_dump_test_arches "daddi"        [mips_arch_list_matching mips3]
1154     run_dump_test_arches "pref" [lsort -dictionary -unique [concat \
1155                                         [mips_arch_list_matching mips4] \
1156                                         [mips_arch_list_matching mips32] ] ]
1157
1158     if $has_newabi { run_dump_test "cfi-n64-1" }
1159
1160     run_dump_test "pr12915"
1161     run_dump_test "reginfo-1a"
1162     run_dump_test "reginfo-1b"
1163
1164     if { !$no_micromips } {
1165         run_dump_test "micromips"
1166         run_dump_test "micromips-trap"
1167         run_list_test "micromips-size-0" \
1168             "-32 -march=mips64 -mmicromips" "microMIPS instruction size 0"
1169         run_dump_test "micromips-size-1"
1170         run_dump_test "micromips-branch-relax"
1171         run_dump_test "micromips-branch-relax-pic"
1172         run_dump_test "micromips-branch-delay"
1173         run_dump_test "micromips-warn-branch-delay"
1174         run_dump_test "micromips-warn-branch-delay-1"
1175         run_dump_test "micromips-b16"
1176     }
1177
1178     run_dump_test_arches "mcu"          [mips_arch_list_matching mips32r2 \
1179                                             !octeon]
1180     run_dump_test_arches "hilo-diff-eb" [mips_arch_list_all]
1181     run_dump_test_arches "hilo-diff-el" [mips_arch_list_all]
1182     if $has_newabi {
1183         run_dump_test_arches "hilo-diff-eb-n32" [mips_arch_list_matching mips3]
1184         run_dump_test_arches "hilo-diff-el-n32" [mips_arch_list_matching mips3]
1185         run_dump_test_arches "hilo-diff-eb-n64" [mips_arch_list_matching mips3]
1186         run_dump_test_arches "hilo-diff-el-n64" [mips_arch_list_matching mips3]
1187     }
1188     run_dump_test_arches "lui"          [mips_arch_list_matching mips1]
1189     run_list_test_arches "lui-1" "-32"  [mips_arch_list_matching mips1]
1190     run_list_test_arches "lui-2" "-32"  [mips_arch_list_matching mips1]
1191
1192     run_dump_test "r5900"
1193     run_dump_test "r5900-full"
1194     if $elf { run_list_test "r5900-nollsc" "-mabi=o64 -march=r5900" }
1195     run_dump_test "r5900-vu0"
1196
1197     run_list_test_arches "ext-ill"      [mips_arch_list_matching mips64r2]
1198 }