2 # Some generic MIPS tests
5 # When adding a new test to this file, try to do the following things:
7 # * If testing assembly and disassembly of code, don't forget to test
8 # the actual bit encodings of the instructions (using the
9 # --show-raw-insn flag to objdump).
11 # * Try to run the test for as many architectures as appropriate,
12 # using the "run_dump_test_arches" or "run_list_test_arches" functions,
13 # along with the output from a call to "mips_arch_list_matching."
15 # * Be sure to compare the test output before and after your testsuite
16 # changes, to verify that existing and new tests were run as expected.
17 # Look for expect ERROR messages in the testsuite .log file to make sure
18 # the new expect code did not contain errors.
20 # To add support for a new CPU to this file, add an appropriate entry
21 # to the sequence of "mips_arch_create" function calls below, and test
22 # the result. The new CPU should automatically be used when running
23 # various tests. If the new CPU is the default CPU for any tool
24 # targets, make sure the call to "mips_arch_create" reflects that fact.
27 # "LOSE" marks information about tests which fail at a particular point
28 # in time, but which are not XFAILed. Either they used to pass
29 # and indicate either regressions or the need to tweak the tests to keep
30 # up the with code, or they are new tests and it is unknown whether or not
31 # they should pass as-is for the given object formats.
34 # The functions below create and manipulate an "architecture data
35 # array" which contains entries for each MIPS architecture (or CPU)
36 # known to these tests. The array contains the following information
37 # for each architecture, indexed by the name of the architecture
38 # described by the entry:
40 # displayname: The name of the entry to be used for pretty-printing.
42 # gprsize: The size in bits of General Purpose Registers provided by
43 # the architecture (must be 32 or 64).
45 # props: A list of text strings which are associated with the
46 # architecture. These include the architecture name as well as
47 # information about what instructions the CPU supports. When matching
48 # based on properties, an additional property is added to the normal
49 # property list, "gpr<gprsize>" so that tests can match CPUs which
50 # have GPRs of a specific size. The following properties are most
51 # useful when matching properties for generic (i.e., not CPU-specific)
54 # mips1, mips2, mips3, mips4, mips5, mips32, mips64
55 # The architecture includes the instructions defined
59 # The architecture interlocks GPRs accesses. (That is,
60 # there are no load delay slots.)
62 # mips3d The architecture includes the MIPS-3D ASE.
64 # ror The architecture includes hardware rotate instructions.
67 # The architecture provides 32- or 64-bit General Purpose
70 # as_flags: The assembler flags used when assembling tests for this
73 # objdump_flags: The objdump flags used when disassembling tests for
76 # Most entries in the architecture array will have values in all of
77 # the fields above. One entry, "default" represents the default CPU
78 # based on the target of the assembler being built. If always has
79 # empty "as_flags" and "objdump_flags."
83 # This function initializes the architecture data array ("mips_arches")
85 proc mips_arch_init {} {
88 # Catch becuase the variable won't be set the first time through.
89 catch {unset mips_arches}
92 # mips_arch_create ARCH GPRSIZE EXTENDS PROPS AS_FLAGS OBJDUMP_FLAGS \
93 # (optional:) DEFAULT_FOR_TARGETS
95 # This function creates a new entry in the architecture data array,
96 # for the architecture or CPU named ARCH, and fills in the entry
97 # according to the rest of the arguments.
99 # The new entry's property list is initialized to contain ARCH, any
100 # properties specified by PROPS, and the properties associated with
101 # the entry specified by EXTENDS. (The new architecture is considered
102 # to extend the capabilities provided by that architecture.)
104 # If DEFAULT_FOR_TARGETS is specified, it is a list of targets for which
105 # this architecture is the default architecture. If "istarget" returns
106 # true for any of the targets in the list, a "default" entry will be
107 # added to the architecture array which indicates that ARCH is the default
109 proc mips_arch_create {arch gprsize extends props as_flags objdump_flags
110 {default_for_targets {}}} {
113 if { [info exists mips_arches($arch)] } {
114 error "mips_arch_create: arch \"$arch\" already exists"
116 if { $gprsize != 32 && $gprsize != 64 } {
117 error "mips_arch_create: invalid GPR size $gprsize"
120 set archdata(displayname) $arch
121 set archdata(gprsize) $gprsize
122 set archdata(as_flags) $as_flags
123 set archdata(objdump_flags) $objdump_flags
124 set archdata(props) $arch
125 eval lappend archdata(props) $props
126 if { [string length $extends] != 0 } {
127 eval lappend archdata(props) [mips_arch_properties $extends 0]
130 set mips_arches($arch) [array get archdata]
132 # Set as default if appropriate.
133 foreach target $default_for_targets {
134 if { [istarget $target] } {
135 if { [info exists mips_arches(default)] } {
136 error "mips_arch_create: default arch already exists"
139 set archdata(displayname) "default = $arch"
140 set archdata(as_flags) ""
141 set archdata(objdump_flags) ""
143 set mips_arches(default) [array get archdata]
151 # This function returns the list of all names of entries in the
152 # architecture data array (including the default entry, if a default
154 proc mips_arch_list_all {} {
156 return [lsort -dictionary [array names mips_arches]]
159 # mips_arch_data ARCH
161 # This function returns the information associated with ARCH
162 # in the architecture data array, in "array get" form.
163 proc mips_arch_data {arch} {
166 if { ! [info exists mips_arches($arch)] } {
167 error "mips_arch_data: unknown arch \"$arch\""
169 return $mips_arches($arch)
172 # mips_arch_displayname ARCH
174 # This function returns the printable name associated with ARCH in
175 # the architecture data array.
176 proc mips_arch_displayname {arch} {
177 array set archdata [mips_arch_data $arch]
178 return $archdata(displayname)
181 # mips_arch_properties ARCH (optional:) INCLUDE_GPRSIZE
183 # This function returns the property list associated with ARCH in the
184 # architecture data array. If INCLUDE_GPRSIZE is non-zero, an additional
185 # "gpr32" or "gpr64" property will be returned as part of the list based
186 # on the architecture's GPR size.
187 proc mips_arch_properties {arch {include_gprsize 1}} {
188 array set archdata [mips_arch_data $arch]
189 set props $archdata(props)
190 if { $include_gprsize } {
191 lappend props gpr$archdata(gprsize)
196 # mips_arch_as_flags ARCH
198 # This function returns the assembler flags associated with ARCH in
199 # the architecture data array.
200 proc mips_arch_as_flags {arch} {
201 array set archdata [mips_arch_data $arch]
202 return $archdata(as_flags)
205 # mips_arch_objdump_flags ARCH
207 # This function returns the objdump disassembly flags associated with
208 # ARCH in the architecture data array.
209 proc mips_arch_objdump_flags {arch} {
210 array set archdata [mips_arch_data $arch]
211 return $archdata(objdump_flags)
214 # mips_arch_matches ARCH PROPMATCHLIST
216 # This function returns non-zero if ARCH matches the set of properties
217 # described by PROPMATCHLIST. Each entry in PROPMATCHLIST can either
218 # be the name of a property which must be matched, or "!" followed by
219 # the name of a property which must not be matched. ARCH matches
220 # PROPMATCHLIST if and only if all of the conditions specified by
221 # PROPMATCHLIST are satisfied.
222 proc mips_arch_matches {arch propmatchlist} {
223 foreach pm $propmatchlist {
224 if { [string match {!*} $pm] } {
227 set p [string range $pm 1 end]
229 # fail if not present.
234 set loc [lsearch -exact [mips_arch_properties $arch] $p]
236 # required-absent and found, or required-present and not found: fail.
237 if { ($inverted && $loc != -1) || (! $inverted && $loc == -1) } {
244 # mips_arch_list_matching ARGS
246 # This function returns a list of all architectures which match
247 # the conditions described by its arguments. Its arguments are
248 # taken as a list and used as the PROPMATCHLIST in a call to
249 # "mips_arch_matches" for each known architecture.
250 proc mips_arch_list_matching {args} {
252 foreach arch [mips_arch_list_all] {
253 # For now, don't match default arch until we know what its
254 # properties actually are.
255 if { [string compare $arch default] == 0
256 && [string length [mips_arch_properties default]] == 0} {
259 if { [mips_arch_matches $arch $args] } {
267 # The functions below facilitate running various types of tests.
269 # run_dump_test_arch NAME ARCH
271 # Invoke "run_dump_test" for test NAME, with extra assembler and
272 # disassembler flags to test architecture ARCH.
273 proc run_dump_test_arch { name arch } {
276 if [catch {run_dump_test $name \
277 "{name {([mips_arch_displayname $arch])}}
278 {objdump {[mips_arch_objdump_flags $arch]}}
279 {as {[mips_arch_as_flags $arch]}}"} rv] {
281 untested "$subdir/$name ($arch)"
285 # run_dump_test_arches NAME ARCH_LIST
287 # Invoke "run_dump_test_arch" for test NAME, for each architecture
288 # listed in ARCH_LIST.
289 proc run_dump_test_arches { name arch_list } {
290 foreach arch $arch_list {
291 run_dump_test_arch "$name" "$arch"
295 # run_list_test NAME OPTS (optional): TESTNAME
297 # Assemble the file "NAME.d" and compare the assembler standard error
298 # output against the regular expressions given in the file "NAME.l".
299 # The assembler is passed the flags given in OPTS. If TESTNAME is
300 # provided, it will be used as the name of the test.
301 proc run_list_test { name opts {testname {}} } {
303 if { [string length $testname] == 0 } then {
304 set testname "MIPS $name"
306 set file $srcdir/$subdir/$name
307 gas_run ${name}.s $opts ">&dump.out"
308 if { [regexp_diff "dump.out" "${file}.l"] } then {
310 verbose "output is [file_contents "dump.out"]" 2
316 # run_list_test_arch NAME OPTS ARCH
318 # Invoke "run_list_test" for test NAME with options OPTS, with extra
319 # assembler flags to test architecture ARCH.
320 proc run_list_test_arch { name opts arch } {
323 set testname "MIPS $name ([mips_arch_displayname $arch])"
324 if [catch {run_list_test "$name" "$opts [mips_arch_as_flags $arch]" \
331 # run_list_test_arches NAME OPTS ARCH_LIST
333 # Invoke "run_list_test_arch" for test NAME with options OPTS, for each
334 # architecture listed in ARCH_LIST.
335 proc run_list_test_arches { name opts arch_list } {
336 foreach arch $arch_list {
337 run_list_test_arch "$name" "$opts" "$arch"
342 # Create the architecture data array by providing data for all
343 # known architectures.
345 # Note that several targets pick default CPU based on ABI. We
346 # can't easily handle that; do NOT list those targets as defaulting
347 # to any architecture.
349 mips_arch_create mips1 32 {} {} \
350 { -march=mips1 -mtune=mips1 } { -mmips:3000 }
351 mips_arch_create mips2 32 mips1 { gpr_ilocks } \
352 { -march=mips2 -mtune=mips2 } { -mmips:6000 }
353 mips_arch_create mips3 64 mips2 {} \
354 { -march=mips3 -mtune=mips3 } { -mmips:4000 }
355 mips_arch_create mips4 64 mips3 {} \
356 { -march=mips4 -mtune=mips4 } { -mmips:8000 }
357 mips_arch_create mips5 64 mips4 {} \
358 { -march=mips5 -mtune=mips5 } { -mmips:mips5 }
359 mips_arch_create mips32 32 mips2 {} \
360 { -march=mips32 -mtune=mips32 } { -mmips:isa32 } \
361 { mipsisa32-*-* mipsisa32el-*-* }
362 mips_arch_create mips32r2 32 mips32 { ror } \
363 { -march=mips32r2 -mtune=mips32r2 } \
365 { mipsisa32r2-*-* mipsisa32r2el-*-* }
366 mips_arch_create mips64 64 mips5 { mips32 } \
367 { -march=mips64 -mtune=mips64 } { -mmips:isa64 } \
368 { mipsisa64-*-* mipsisa64el-*-* }
369 mips_arch_create mips64r2 64 mips64 { mips32r2 ror } \
370 { -march=mips64r2 -mtune=mips64r2 } \
372 { mipsisa64r2-*-* mipsisa64r2el-*-* }
373 mips_arch_create r3000 32 mips1 {} \
374 { -march=r3000 -mtune=r3000 } { -mmips:3000 }
375 mips_arch_create r3900 32 mips1 { gpr_ilocks } \
376 { -march=r3900 -mtune=r3900 } { -mmips:3900 } \
377 { mipstx39-*-* mipstx39el-*-* }
378 mips_arch_create r4000 64 mips3 {} \
379 { -march=r4000 -mtune=r4000 } { -mmips:4000 }
380 mips_arch_create vr5400 64 mips4 { ror } \
381 { -march=vr5400 -mtune=vr5400 } { -mmips:5400 }
382 mips_arch_create sb1 64 mips64 { mips3d } \
383 { -march=sb1 -mtune=sb1 } { -mmips:sb1 } \
384 { mipsisa64sb1-*-* mipsisa64sb1el-*-* }
387 # And now begin the actual tests! VxWorks uses RELA rather than REL
388 # relocations, so most of the generic dump tests will not work there.
390 if { [istarget mips*-*-vxworks*] } {
391 run_dump_test "vxworks1"
392 run_dump_test "vxworks1-xgot"
393 run_dump_test "vxworks1-el"
394 run_dump_test "vxworks1-xgot-el"
395 } elseif { [istarget mips*-*-*] } {
397 set elf [expr [istarget *-*-elf*] || [istarget *-*-irix5*] || [istarget *-*-irix6* ] || [istarget *-*-linux*] || [istarget *-*-netbsd*] ]
398 set ecoff [expr [istarget *-*-ecoff*] || [istarget *-*-ultrix*] || [istarget *-*-irix\[1-4\]*] ]
399 set aout [expr [istarget *-*-bsd*] || [istarget *-*-openbsd*] ]
400 set ilocks [istarget mipstx39*-*-*]
401 set gpr_ilocks [expr [istarget mipstx39*-*-*]]
402 set addr32 [expr [istarget mipstx39*-*-*] || [istarget mips-*-linux*] || [istarget mipsel-*-linux*]]
403 set has_newabi [expr [istarget *-*-irix6*] || [istarget mips64*-*-linux*]]
405 if { [istarget "mips*-*-*linux*"] } then {
410 if [istarget mips*el-*-*] {
416 run_dump_test_arches "abs" [mips_arch_list_matching mips1]
417 run_dump_test_arches "add" [mips_arch_list_matching mips1]
418 run_dump_test_arches "and" [mips_arch_list_matching mips1]
419 run_dump_test "break20"
420 run_dump_test "trap20"
422 # LOSE: As of 2002-02-08, "beq" through "bltu" fail for target mips-ecoff.
423 # See http://sources.redhat.com/ml/binutils/2001-10/msg00418.html for
424 # more information. Not sure if the fixes there are correct; should
425 # branches to external labels be allowed for ECOFF?
426 # XXX FIXME: the following tests require -mips2 disasm for
427 # branch-likely instructions. They should be split.
428 run_dump_test_arches "beq" [mips_arch_list_matching mips2]
429 run_dump_test_arches "bge" [mips_arch_list_matching mips2]
430 run_dump_test_arches "bgeu" [mips_arch_list_matching mips2]
431 run_dump_test_arches "blt" [mips_arch_list_matching mips2]
432 run_dump_test_arches "bltu" [mips_arch_list_matching mips2]
433 run_dump_test_arches "branch-misc-1" [mips_arch_list_matching mips1]
434 run_dump_test_arches "branch-misc-2" [mips_arch_list_matching mips1]
435 run_dump_test_arches "branch-misc-2pic" [mips_arch_list_matching mips1]
436 run_dump_test_arches "branch-misc-2-64" [mips_arch_list_matching mips3]
437 run_dump_test_arches "branch-misc-2pic-64" [mips_arch_list_matching mips3]
438 run_dump_test "branch-misc-3"
439 run_dump_test "branch-swap"
442 run_dump_test "div-ilocks"
447 run_dump_test_arches "dli" [mips_arch_list_matching mips3]
450 run_dump_test_arches "elf-jal" [mips_arch_list_matching mips1]
454 if $elf { run_dump_test "jal-svr4pic" }
455 if $elf { run_dump_test "jal-xgot" }
456 run_list_test_arches "jal-range" "-32" [mips_arch_list_matching mips1]
457 if $has_newabi { run_dump_test "jal-newabi" }
458 if !$aout { run_dump_test "la" }
459 if $elf { run_dump_test "la-svr4pic" }
460 if $elf { run_dump_test "la-xgot" }
461 if $elf { run_dump_test "lca-svr4pic" }
462 if $elf { run_dump_test "lca-xgot" }
464 # XXX FIXME: Has mips2 and later insns with mips1 disassemblies.
465 # (Should split and then use appropriate arch lists.)
466 run_dump_test_arches "lb" [mips_arch_list_matching !mips2]
469 run_dump_test_arches "lb-svr4pic" [mips_arch_list_matching !gpr_ilocks]
470 run_dump_test_arches "lb-svr4pic-ilocks" [mips_arch_list_matching gpr_ilocks]
473 # Both versions specify the cpu, so we can run both regardless of
474 # the interlocking in the configured default cpu.
475 run_dump_test "lb-xgot"
476 run_dump_test "lb-xgot-ilocks"
483 run_dump_test "ld-ilocks"
485 run_dump_test "ld-ilocks-addr32"
489 if $elf { run_dump_test "ld-svr4pic" }
490 if $elf { run_dump_test "ld-xgot" }
491 run_dump_test_arches "li" [mips_arch_list_matching mips1]
492 if !$aout { run_dump_test "lifloat" }
493 if $elf { run_dump_test "lif-svr4pic" }
494 if $elf { run_dump_test "lif-xgot" }
495 run_dump_test_arches "mips4" [mips_arch_list_matching mips4]
496 run_dump_test_arches "mips5" [mips_arch_list_matching mips5]
498 run_dump_test "mul-ilocks"
503 run_dump_test_arches "rol" [mips_arch_list_matching !ror]
504 run_dump_test_arches "rol-hw" [mips_arch_list_matching ror]
506 run_dump_test_arches "rol64" [mips_arch_list_matching gpr64 !ror]
507 run_dump_test_arches "rol64-hw" [mips_arch_list_matching gpr64 ror]
509 if !$aout { run_dump_test "sb" }
510 run_dump_test "trunc"
511 if !$aout { run_dump_test "ulh" }
512 run_dump_test_arches "ulh2-eb" [mips_arch_list_matching mips1]
513 run_dump_test_arches "ulh2-el" [mips_arch_list_matching mips1]
514 if $elf { run_dump_test "ulh-svr4pic" }
515 if $elf { run_dump_test "ulh-xgot" }
523 run_dump_test_arches "ulw2-eb" [mips_arch_list_matching !gpr_ilocks]
524 run_dump_test_arches "ulw2-eb-ilocks" [mips_arch_list_matching gpr_ilocks]
525 run_dump_test_arches "ulw2-el" [mips_arch_list_matching !gpr_ilocks]
526 run_dump_test_arches "ulw2-el-ilocks" [mips_arch_list_matching gpr_ilocks]
528 run_dump_test_arches "uld2-eb" [mips_arch_list_matching mips3]
529 run_dump_test_arches "uld2-el" [mips_arch_list_matching mips3]
531 # The mips16 test can only be run on ELF, because only ELF
532 # supports the necessary mips16 reloc.
533 if { $elf && !$no_mips16 } {
534 run_dump_test "mips16"
535 run_dump_test "mips16-64"
536 # Check jalx handling
537 run_dump_test "mips16-jalx"
538 run_dump_test "mips-jalx"
539 # Check MIPS16 HI16/LO16 relocations
540 run_dump_test "mips16-hilo"
542 run_dump_test "mips16-hilo-n32"
545 run_list_test "mips-no-jalx" "-32"
546 run_dump_test "delay"
547 run_dump_test "nodelay"
548 run_dump_test "mips4010"
549 run_dump_test "mips4650"
550 run_dump_test "mips4100"
551 run_dump_test "vr4111"
552 run_dump_test "vr4120"
553 run_dump_test "vr4120-2"
554 run_dump_test "vr4130"
555 run_dump_test "vr5400"
556 run_dump_test "vr5500"
557 run_dump_test "rm7000"
558 run_dump_test "perfcount"
559 run_dump_test "lineno"
562 run_dump_test_arches "mips32" [mips_arch_list_matching mips32]
564 run_dump_test_arches "mips32r2" [mips_arch_list_matching mips32r2]
565 run_list_test_arches "mips32r2-ill" "-32" \
566 [mips_arch_list_matching mips32r2 gpr32]
567 run_list_test_arches "mips32r2-ill-fp64" "-mabi=o64" \
568 [mips_arch_list_matching mips32r2 gpr64]
570 run_dump_test_arches "mips64" [mips_arch_list_matching mips64]
572 run_dump_test_arches "mips64r2" [mips_arch_list_matching mips64r2]
573 run_list_test_arches "mips64r2-ill" "" [mips_arch_list_matching mips64r2]
575 run_dump_test "set-arch"
578 run_dump_test "mips64-mips3d"
579 run_dump_test_arches "mips64-mips3d-incl" [mips_arch_list_matching mips3d]
581 run_dump_test "mips64-mdmx"
582 run_dump_test "sb1-ext-mdmx"
583 run_dump_test "sb1-ext-ps"
586 run_dump_test "relax"
587 run_dump_test "relax-swap1-mips1"
588 run_dump_test "relax-swap1-mips2"
589 run_dump_test "relax-swap2"
591 run_list_test "illegal" "-32"
592 run_list_test "baddata1" "-32"
594 # LOSE: As of 2002-02-08, the next 4 tests fail for target mips-ecoff.
595 # It's unknown whether they _should_ pass as-is, or whether different
596 # variants are needed for ELF and ECOFF.
597 run_dump_test "mips-gp32-fp32"
598 run_dump_test "mips-gp32-fp64"
599 run_dump_test "mips-gp64-fp32"
600 run_dump_test "mips-gp64-fp64"
603 # Make sure that -mcpu=FOO and -mFOO are equivalent. Assemble a file
604 # containing 4650-specific instructions with -m4650 and -mcpu=4650,
605 # and verify that they're the same. Specifically, we're checking
606 # that the EF_MIPS_MACH field is set, and that the 4650 'mul'
607 # instruction does get used. In previous versions of GAS,
608 # only -mcpu=4650 would set the EF_MIPS_MACH field; -m4650 wouldn't.
609 run_dump_test "elf_e_flags1"
610 run_dump_test "elf_e_flags2"
611 run_dump_test "elf_e_flags3"
612 run_dump_test "elf_e_flags4"
614 # Check EF_MIPS_ARCH markings for each supported architecture.
615 run_dump_test "elf_arch_mips1"
616 run_dump_test "elf_arch_mips2"
617 run_dump_test "elf_arch_mips3"
618 run_dump_test "elf_arch_mips4"
619 run_dump_test "elf_arch_mips5"
620 run_dump_test "elf_arch_mips32"
621 run_dump_test "elf_arch_mips32r2"
622 run_dump_test "elf_arch_mips64"
623 run_dump_test "elf_arch_mips64r2"
625 # Verify that ASE markings are handled properly.
626 if { !$no_mips16 } { run_dump_test "elf_ase_mips16" }
628 run_dump_test "mips-gp32-fp32-pic"
629 run_dump_test "mips-gp32-fp64-pic"
630 run_dump_test "mips-gp64-fp32-pic"
631 run_dump_test "mips-gp64-fp64-pic"
633 run_dump_test "mips-abi32"
634 run_dump_test "mips-abi32-pic"
635 run_dump_test "mips-abi32-pic2"
637 run_dump_test "elf${el}-rel"
638 if {[istarget mips64*-*-*] || [istarget mipsisa32*-*-*]
639 || [istarget mipsisa64*-*-*]} {
640 run_dump_test "elf${el}-rel2"
642 run_dump_test "e32${el}-rel2"
644 run_dump_test "elf${el}-rel3"
645 if {[istarget mips64*-*-*]} {
646 run_dump_test "elf-rel4"
648 run_dump_test "e32-rel4"
650 run_dump_test "elf-rel5"
651 run_dump_test "elf-rel6"
652 run_dump_test "elf-rel7"
653 run_dump_test "elf-rel8"
654 run_dump_test "elf-rel9"
656 run_dump_test "elf-rel10"
657 run_dump_test "elf-rel11"
659 run_dump_test "elf-rel12"
660 run_dump_test "elf-rel13"
661 run_dump_test "elf-rel14"
664 run_dump_test "elf-rel15"
665 run_dump_test "elf-rel16"
667 run_dump_test "elf-rel-got-n32"
668 run_dump_test "elf-rel-xgot-n32"
669 run_dump_test "elf-rel-got-n64"
670 run_dump_test "elf-rel-xgot-n64"
672 run_dump_test "elf-rel17"
674 run_dump_test "elf-rel18"
676 run_dump_test "elf-rel19"
677 run_dump_test "elf-rel20"
679 run_dump_test "elf-rel21"
680 run_dump_test "elf-rel22"
681 run_dump_test "elf-rel23"
682 run_dump_test "elf-rel23a"
683 run_dump_test "elf-rel23b"
684 run_dump_test "elf-rel24"
687 run_dump_test "elf-rel25"
688 run_dump_test "elf-rel25a"
691 run_dump_test "${tmips}mips${el}16-e"
692 run_dump_test "${tmips}mips${el}16-f"
694 run_dump_test "elf-consthilo"
695 run_dump_test "expr1"
697 run_list_test "tls-ill" "-32"
698 run_dump_test "tls-o32"
702 run_dump_test "n32-consec"
705 # tests of objdump's ability to disassemble using different
707 run_dump_test "gpr-names-numeric"
708 run_dump_test "gpr-names-32"
709 run_dump_test "gpr-names-n32"
710 run_dump_test "gpr-names-64"
712 run_dump_test "fpr-names-numeric"
713 run_dump_test "fpr-names-32"
714 run_dump_test "fpr-names-n32"
715 run_dump_test "fpr-names-64"
717 run_dump_test "cp0-names-numeric"
718 run_dump_test "cp0-names-mips32"
719 run_dump_test "cp0-names-mips32r2"
720 run_dump_test "cp0-names-mips64"
721 run_dump_test "cp0-names-mips64r2"
722 run_dump_test "cp0-names-sb1"
724 run_dump_test "cp0sel-names-numeric"
725 run_dump_test "cp0sel-names-mips32"
726 run_dump_test "cp0sel-names-mips32r2"
727 run_dump_test "cp0sel-names-mips64"
728 run_dump_test "cp0sel-names-mips64r2"
729 run_dump_test "cp0sel-names-sb1"
731 run_dump_test "hwr-names-numeric"
732 run_dump_test "hwr-names-mips32r2"
733 run_dump_test "hwr-names-mips64r2"
735 run_dump_test "ldstla-32"
736 run_dump_test "ldstla-32-mips3"
737 run_dump_test "ldstla-32-shared"
738 run_dump_test "ldstla-32-mips3-shared"
739 run_list_test "ldstla-32-1" "-mabi=32" \
740 "MIPS ld-st-la bad constants (ABI o32)"
741 run_list_test "ldstla-32-mips3-1" "-mabi=32" \
742 "MIPS ld-st-la bad constants (ABI o32, mips3)"
743 run_list_test "ldstla-32-1" "-KPIC -mabi=32" \
744 "MIPS ld-st-la bad constants (ABI o32, shared)"
745 run_list_test "ldstla-32-mips3-1" "-KPIC -mabi=32" \
746 "MIPS ld-st-la bad constants (ABI o32, mips3, shared)"
747 run_dump_test "ldstla-eabi64"
749 run_dump_test "ldstla-n64"
750 run_dump_test "ldstla-n64-shared"
751 run_dump_test "ldstla-n64-sym32"
754 run_dump_test "macro-warn-1"
755 run_dump_test "macro-warn-2"
756 run_dump_test "macro-warn-3"
757 run_dump_test "macro-warn-4"
759 run_dump_test "macro-warn-1-n32"
760 run_dump_test "macro-warn-2-n32"
763 run_dump_test "noat-1"
764 run_list_test "noat-2" ""
765 run_list_test "noat-3" ""
766 run_list_test "noat-4" ""
767 run_list_test "noat-5" ""
768 run_list_test "noat-6" ""
769 run_list_test "noat-7" ""
771 run_dump_test_arches "smartmips" [mips_arch_list_matching mips32 !gpr64]
772 run_dump_test_arches "mips32-dsp" [mips_arch_list_matching mips32r2]
773 run_dump_test_arches "mips32-mt" [mips_arch_list_matching mips32r2 !gpr64]
775 if { $elf && !$no_mips16 } {
776 run_dump_test "mips16-dwarf2"
778 run_dump_test "mips16-dwarf2-n32"
782 # Check MIPS16e extensions
783 run_dump_test_arches "mips16e" [mips_arch_list_matching mips32]
784 run_dump_test "mips16e-jrc"
785 run_dump_test "mips16e-save"
786 run_dump_test "mips16e-64"
787 run_list_test "mips16e-64" "-march=mips32"
789 run_dump_test "vxworks1"
790 run_dump_test "vxworks1-xgot"
791 run_dump_test "vxworks1-el"
792 run_dump_test "vxworks1-xgot-el"
794 run_dump_test "noreorder"