* gas/mips/micromips@mips5.d: Rename to...
[platform/upstream/binutils.git] / gas / testsuite / gas / mips / mips.exp
1 #
2 # Some generic MIPS tests
3 #
4
5 # When adding a new test to this file, try to do the following things:
6 #
7 # * If testing assembly and disassembly of code, don't forget to test
8 # the actual bit encodings of the instructions (using the
9 # --show-raw-insn flag to objdump). 
10 #
11 # * Try to run the test for as many architectures as appropriate,
12 # using the "run_dump_test_arches" or "run_list_test_arches" functions,
13 # along with the output from a call to "mips_arch_list_matching."
14 #
15 # * Be sure to compare the test output before and after your testsuite
16 # changes, to verify that existing and new tests were run as expected.
17 # Look for expect ERROR messages in the testsuite .log file to make sure
18 # the new expect code did not contain errors.
19
20 # To add support for a new CPU to this file, add an appropriate entry
21 # to the sequence of "mips_arch_create" function calls below, and test
22 # the result.  The new CPU should automatically be used when running
23 # various tests.  If the new CPU is the default CPU for any tool
24 # targets, make sure the call to "mips_arch_create" reflects that fact.
25
26
27 # "LOSE" marks information about tests which fail at a particular point
28 # in time, but which are not XFAILed.  Either they used to pass
29 # and indicate either regressions or the need to tweak the tests to keep
30 # up the with code, or they are new tests and it is unknown whether or not
31 # they should pass as-is for the given object formats.
32
33
34 # The functions below create and manipulate an "architecture data
35 # array" which contains entries for each MIPS architecture (or CPU)
36 # known to these tests.  The array contains the following information
37 # for each architecture, indexed by the name of the architecture
38 # described by the entry:
39 #
40 # displayname: The name of the entry to be used for pretty-printing.
41 #
42 # gprsize: The size in bits of General Purpose Registers provided by
43 # the architecture (must be 32 or 64).
44 #
45 # props: A list of text strings which are associated with the
46 # architecture.  These include the architecture name as well as
47 # information about what instructions the CPU supports.  When matching
48 # based on properties, an additional property is added to the normal
49 # property list, "gpr<gprsize>" so that tests can match CPUs which
50 # have GPRs of a specific size.  The following properties are most
51 # useful when matching properties for generic (i.e., not CPU-specific)
52 # tests:
53 #
54 #       mips1, mips2, mips3, mips4, mips5, mips32, mips64
55 #               The architecture includes the instructions defined
56 #               by that MIPS ISA.
57 #
58 #       fpisa3, fpisa4, fpisa5
59 #               The architecture includes the floating-point
60 #               instructions defined by that MIPS ISA.
61 #
62 #       gpr_ilocks
63 #               The architecture interlocks GPRs accesses.  (That is,
64 #               there are no load delay slots.)
65 #
66 #       mips3d  The architecture includes the MIPS-3D ASE.
67 #
68 #       ror     The architecture includes hardware rotate instructions.
69 #
70 #       gpr32, gpr64
71 #               The architecture provides 32- or 64-bit General Purpose
72 #               Registers.
73 #
74 # as_flags: The assembler flags used when assembling tests for this
75 # architecture.
76 #
77 # objdump_flags: The objdump flags used when disassembling tests for
78 # this architecture.
79 #
80 # Most entries in the architecture array will have values in all of
81 # the fields above.  One entry, "default" represents the default CPU
82 # based on the target of the assembler being built.  If always has
83 # empty "as_flags" and "objdump_flags."
84
85 # mips_arch_init
86 #
87 # This function initializes the architecture data array ("mips_arches")
88 # to be empty.
89 proc mips_arch_init {} {
90     global mips_arches
91
92     # Catch because the variable won't be set the first time through.
93     catch {unset mips_arches}
94 }
95
96 # mips_arch_create ARCH GPRSIZE EXTENDS PROPS AS_FLAGS OBJDUMP_FLAGS \
97 #                  (optional:) DEFAULT_FOR_TARGETS
98 #
99 # This function creates a new entry in the architecture data array,
100 # for the architecture or CPU named ARCH, and fills in the entry
101 # according to the rest of the arguments.
102 #
103 # The new entry's property list is initialized to contain ARCH, any
104 # properties specified by PROPS, and the properties associated with
105 # the entry specified by EXTENDS.  (The new architecture is considered
106 # to extend the capabilities provided by that architecture.)
107 #
108 # If DEFAULT_FOR_TARGETS is specified, it is a list of targets for which
109 # this architecture is the default architecture.  If "istarget" returns
110 # true for any of the targets in the list, a "default" entry will be
111 # added to the architecture array which indicates that ARCH is the default
112 # architecture.
113 proc mips_arch_create {arch gprsize extends props as_flags objdump_flags
114                        {default_for_targets {}}} {
115     global mips_arches
116
117     if { [info exists mips_arches($arch)] } {
118              error "mips_arch_create: arch \"$arch\" already exists"
119     }
120     if { $gprsize != 32 && $gprsize != 64 } {
121         error "mips_arch_create: invalid GPR size $gprsize"
122     }
123
124     set archdata(displayname) $arch
125     set archdata(gprsize) $gprsize
126     set archdata(as_flags) $as_flags
127     set archdata(objdump_flags) $objdump_flags
128     set archdata(props) $arch
129     eval lappend archdata(props) $props
130     if { [string length $extends] != 0 } {
131         eval lappend archdata(props) [mips_arch_properties $extends 0]
132     }
133
134     set mips_arches($arch) [array get archdata]
135
136     # Set as default if appropriate.
137     foreach target $default_for_targets {
138         if { [istarget $target] } {
139             if { [info exists mips_arches(default)] } {
140                 error "mips_arch_create: default arch already exists"
141             }
142
143             set archdata(displayname) "default = $arch"
144             set archdata(as_flags) ""
145             set archdata(objdump_flags) ""
146
147             set mips_arches(default) [array get archdata]
148             break
149         }
150     }
151 }
152
153 # mips_arch_destroy ARCH
154 #
155 # The opposite of the above.  This function removes an entry from
156 # the architecture data array, for the architecture or CPU named ARCH.
157
158 proc mips_arch_destroy {arch} {
159     global mips_arches
160
161     if { [info exists mips_arches($arch)] } {
162         unset mips_arches($arch)
163     }
164 }
165
166 # mips_arch_list_all
167 #
168 # This function returns the list of all names of entries in the
169 # architecture data array (including the default entry, if a default
170 # is known).
171 proc mips_arch_list_all {} {
172     global mips_arches
173     return [lsort -dictionary [array names mips_arches]]
174 }
175
176 # mips_arch_data ARCH
177 #
178 # This function returns the information associated with ARCH
179 # in the architecture data array, in "array get" form.
180 proc mips_arch_data {arch} {
181     global mips_arches
182
183     if { ! [info exists mips_arches($arch)] } {
184         error "mips_arch_data: unknown arch \"$arch\""
185     }
186     return $mips_arches($arch)
187 }
188
189 # mips_arch_displayname ARCH
190 #
191 # This function returns the printable name associated with ARCH in
192 # the architecture data array.
193 proc mips_arch_displayname {arch} {
194     array set archdata [mips_arch_data $arch]
195     return $archdata(displayname)
196 }
197
198 # mips_arch_properties ARCH (optional:) INCLUDE_GPRSIZE
199 #
200 # This function returns the property list associated with ARCH in the
201 # architecture data array, including the "canonical" target name as the
202 # first element.
203 #
204 # If INCLUDE_GPRSIZE is non-zero, an additional "gpr32" or "gpr64"
205 # property will be returned as part of the list based on the
206 # architecture's GPR size.
207 proc mips_arch_properties {arch {include_gprsize 1}} {
208     array set archdata [mips_arch_data $arch]
209     set props $archdata(props)
210     if { $include_gprsize } {
211         lappend props gpr$archdata(gprsize)
212     }
213     return $props
214 }
215
216 # mips_arch_as_flags ARCH
217 #
218 # This function returns the assembler flags associated with ARCH in
219 # the architecture data array. 
220 proc mips_arch_as_flags {arch} {
221     array set archdata [mips_arch_data $arch]
222     return $archdata(as_flags)
223 }
224
225 # mips_arch_objdump_flags ARCH
226 #
227 # This function returns the objdump disassembly flags associated with
228 # ARCH in the architecture data array. 
229 proc mips_arch_objdump_flags {arch} {
230     array set archdata [mips_arch_data $arch]
231     return $archdata(objdump_flags)
232 }
233
234 # mips_arch_matches ARCH PROPMATCHLIST
235 #
236 # This function returns non-zero if ARCH matches the set of properties
237 # described by PROPMATCHLIST.  Each entry in PROPMATCHLIST can either
238 # be the name of a property which must be matched, or "!" followed by
239 # the name of a property which must not be matched.  ARCH matches
240 # PROPMATCHLIST if and only if all of the conditions specified by
241 # PROPMATCHLIST are satisfied.
242 proc mips_arch_matches {arch propmatchlist} {
243     foreach pm $propmatchlist {
244         if { [string match {!*} $pm] } {
245             # fail if present.
246             set inverted 1
247             set p [string range $pm 1 end]
248         } {
249             # fail if not present.
250             set inverted 0
251             set p $pm
252         }
253
254         set loc [lsearch -exact [mips_arch_properties $arch] $p]
255
256         # required-absent and found, or required-present and not found: fail.
257         if { ($inverted && $loc != -1) || (! $inverted && $loc == -1) } {
258             return 0
259         }
260     }
261     return 1
262 }
263
264 # mips_arch_list_matching ARGS
265 #
266 # This function returns a list of all architectures which match
267 # the conditions described by its arguments.  Its arguments are
268 # taken as a list and used as the PROPMATCHLIST in a call to
269 # "mips_arch_matches" for each known architecture.
270 proc mips_arch_list_matching {args} {
271     set l ""
272     foreach arch [mips_arch_list_all] {
273         # For now, don't match default arch until we know what its
274         # properties actually are.
275         if { [string compare $arch default] == 0
276              && [string length [mips_arch_properties default]] == 0} {
277             continue
278         }
279         if { [mips_arch_matches $arch $args] } {
280             lappend l $arch
281         }
282     }
283     return $l
284 }
285
286
287 # The functions below facilitate running various types of tests.
288
289 # run_dump_test_arch NAME ARCH
290 #
291 # Invoke "run_dump_test" for test NAME, with extra assembler and
292 # disassembler flags to test architecture ARCH.
293 #
294 # You can override the expected output for particular architectures
295 # and file formats.  The possible test names are, in order of preference:
296 #
297 # 1. CARCH@FORMAT@NAME.d
298 # 2. CARCH@NAME.d
299 # 3. FORMAT@NAME.d
300 # 4. NAME.d
301 #
302 # where CARCH is the "canonical" name of architecture ARCH as recorded
303 # in its associated property list, and where FORMAT is the target's
304 # file format (one of "elf", "ecoff" or "aout").
305 proc run_dump_test_arch { name arch } {
306     upvar elf elf ecoff ecoff aout aout
307     global subdir srcdir
308
309     set format [expr { $elf ? "elf" : $ecoff ? "ecoff" : "aout" }]
310     set proparch [lindex [mips_arch_properties $arch 0] 0]
311     foreach prefix [list ${proparch}@${format}@ ${proparch}@ ${format}@] {
312         set archname ${prefix}${name}
313         if { [file exists "$srcdir/$subdir/${archname}.d"] } {
314             set name $archname
315             break
316         }
317     }
318
319     if [catch {run_dump_test $name \
320                              "{name    {([mips_arch_displayname $arch])}}
321                               {objdump {[mips_arch_objdump_flags $arch]}}
322                               {as      {[mips_arch_as_flags $arch]}}"} rv] {
323         perror "$rv"
324         untested "$subdir/$name ($arch)"
325     }
326 }
327
328 # run_dump_test_arches NAME ARCH_LIST
329 #
330 # Invoke "run_dump_test_arch" for test NAME, for each architecture
331 # listed in ARCH_LIST.
332 proc run_dump_test_arches { name arch_list } {
333     upvar elf elf ecoff ecoff aout aout
334     foreach arch $arch_list {
335         run_dump_test_arch "$name" "$arch"
336     }
337 }
338
339 # run_list_test_arch NAME OPTS ARCH
340 #
341 # Invoke "run_list_test" for test NAME with options OPTS, with extra
342 # assembler flags to test architecture ARCH.
343 proc run_list_test_arch { name opts arch } {
344     global subdir
345
346     set testname "MIPS $name ([mips_arch_displayname $arch])"
347     if [catch {run_list_test "$name" "$opts [mips_arch_as_flags $arch]" \
348                              "$testname"} rv] {
349         perror "$rv"
350         untested "$testname"
351     }
352 }
353
354 # run_list_test_arches NAME OPTS ARCH_LIST
355 #
356 # Invoke "run_list_test_arch" for test NAME with options OPTS, for each
357 # architecture listed in ARCH_LIST.
358 proc run_list_test_arches { name opts arch_list } {
359     foreach arch $arch_list {
360         run_list_test_arch "$name" "$opts" "$arch"
361     }
362 }
363
364
365 # Create the architecture data array by providing data for all
366 # known architectures.
367 #
368 # Note that several targets pick default CPU based on ABI.  We
369 # can't easily handle that; do NOT list those targets as defaulting
370 # to any architecture.
371 mips_arch_init
372 mips_arch_create mips1  32      {}      {} \
373                         { -march=mips1 -mtune=mips1 } { -mmips:3000 }
374 mips_arch_create mips2  32      mips1   { gpr_ilocks } \
375                         { -march=mips2 -mtune=mips2 } { -mmips:6000 }
376 mips_arch_create mips3  64      mips2   { fpisa3 } \
377                         { -march=mips3 -mtune=mips3 } { -mmips:4000 }
378 mips_arch_create mips4  64      mips3   { fpisa4 } \
379                         { -march=mips4 -mtune=mips4 } { -mmips:8000 }
380 mips_arch_create mips5  64      mips4   { fpisa5 } \
381                         { -march=mips5 -mtune=mips5 } { -mmips:mips5 }
382 mips_arch_create mips32 32      mips2   {} \
383                         { -march=mips32 -mtune=mips32 } { -mmips:isa32 } \
384                         { mipsisa32-*-* mipsisa32el-*-* }
385 mips_arch_create mips32r2 32    mips32  { fpisa3 fpisa4 fpisa5 ror } \
386                         { -march=mips32r2 -mtune=mips32r2 } \
387                         { -mmips:isa32r2 } \
388                         { mipsisa32r2-*-* mipsisa32r2el-*-* }
389 mips_arch_create mips64 64      mips5   { mips32 } \
390                         { -march=mips64 -mtune=mips64 } { -mmips:isa64 } \
391                         { mipsisa64-*-* mipsisa64el-*-* }
392 mips_arch_create mips64r2 64    mips64  { mips32r2 ror } \
393                         { -march=mips64r2 -mtune=mips64r2 } \
394                         { -mmips:isa64r2 } \
395                         { mipsisa64r2-*-* mipsisa64r2el-*-* }
396 mips_arch_create mips16 32      {}      {} \
397                         { -march=mips1 -mips16 } { -mmips:16 }
398 mips_arch_create micromips 64   mips64r2 {} \
399                         { -march=mips64 -mmicromips } {}
400 mips_arch_create r3000  32      mips1   {} \
401                         { -march=r3000 -mtune=r3000 } { -mmips:3000 }
402 mips_arch_create r3900  32      mips1   { gpr_ilocks } \
403                         { -march=r3900 -mtune=r3900 } { -mmips:3900 } \
404                         { mipstx39-*-* mipstx39el-*-* }
405 mips_arch_create r4000  64      mips3   {} \
406                         { -march=r4000 -mtune=r4000 } { -mmips:4000 }
407 mips_arch_create vr5400 64      mips4   { ror } \
408                         { -march=vr5400 -mtune=vr5400 } { -mmips:5400 }
409 mips_arch_create sb1    64      mips64  { mips3d } \
410                         { -march=sb1 -mtune=sb1 } { -mmips:sb1 } \
411                         { mipsisa64sb1-*-* mipsisa64sb1el-*-* }
412 mips_arch_create octeon 64      mips64r2 {} \
413                         { -march=octeon -mtune=octeon } { -mmips:octeon } \
414                         { mips64octeon*-*-* }
415 mips_arch_create xlr    64      mips64  {} \
416                         { -march=xlr -mtune=xlr } { -mmips:xlr }
417
418 #
419 # And now begin the actual tests!  VxWorks uses RELA rather than REL
420 # relocations, so most of the generic dump tests will not work there.
421 #
422 if { [istarget mips*-*-vxworks*] } {
423     run_dump_test "vxworks1"
424     run_dump_test "vxworks1-xgot"
425     run_dump_test "vxworks1-el"
426     run_dump_test "vxworks1-xgot-el"
427 } elseif { [istarget mips*-*-*] } {
428     set elf [expr [istarget *-*-elf*] || [istarget *-*-irix5*] || [istarget *-*-irix6* ] || [istarget *-*-linux*] || [istarget *-*-netbsd*] ]
429     set ecoff [expr [istarget *-*-ecoff*] || [istarget *-*-ultrix*] || [istarget *-*-irix\[1-4\]*] ]
430     set aout [expr [istarget *-*-bsd*] || [istarget *-*-openbsd*] ]
431     set addr32 [expr [istarget mipstx39*-*-*] || [istarget mips-*-linux*] || [istarget mipsel-*-linux*] || [istarget mips*-*-ecoff]]
432     set has_newabi [expr [istarget *-*-irix6*] || [istarget mips64*-*-linux*]]
433     set no_mips16 [expr !$elf]
434     set no_micromips [expr !$elf]
435
436     if { [istarget "mips*-*-*linux*"] || [istarget "mips*-sde-elf*"] } then {
437         set tmips "t"
438     } else {
439         set tmips ""
440     }
441     if [istarget mips*el-*-*] {
442         set el "el"
443     } {
444         set el ""
445     }
446     if { $no_mips16 } {
447         mips_arch_destroy mips16
448     }
449     if { $no_micromips } {
450         mips_arch_destroy micromips
451     }
452     
453     run_dump_test_arches "abs"          [mips_arch_list_matching mips1]
454     run_dump_test_arches "add"          [mips_arch_list_matching mips1]
455     run_dump_test_arches "and"          [mips_arch_list_matching mips1]
456     run_dump_test_arches "mips1-fp"     [mips_arch_list_matching mips1]
457     run_list_test_arches "mips1-fp" "-32 -msoft-float" \
458                                         [mips_arch_list_matching mips1]
459     run_dump_test "break20"
460     run_dump_test "trap20"
461
462     # LOSE: As of 2002-02-08, "beq" through "bltu" fail for target mips-ecoff.
463     # See http://sources.redhat.com/ml/binutils/2001-10/msg00418.html for
464     # more information.  Not sure if the fixes there are correct; should
465     # branches to external labels be allowed for ECOFF?
466     run_dump_test_arches "beq"          [mips_arch_list_matching mips1]
467     run_dump_test_arches "bge"          [mips_arch_list_matching mips1]
468     run_dump_test_arches "bgeu"         [mips_arch_list_matching mips1]
469     run_dump_test_arches "blt"          [mips_arch_list_matching mips1]
470     run_dump_test_arches "bltu"         [mips_arch_list_matching mips1]
471     run_dump_test_arches "branch-likely" [mips_arch_list_matching mips2]
472     run_dump_test_arches "branch-misc-1" [mips_arch_list_matching mips1]
473     run_dump_test_arches "branch-misc-2" [mips_arch_list_matching mips1]
474     run_dump_test_arches "branch-misc-2pic" [mips_arch_list_matching mips1]
475     run_dump_test_arches "branch-misc-2-64" [mips_arch_list_matching mips3]
476     run_dump_test_arches "branch-misc-2pic-64" [mips_arch_list_matching mips3]
477     run_dump_test "branch-misc-3"
478     run_dump_test "branch-swap"
479     run_dump_test "div"
480
481     if { !$addr32 } {
482         run_dump_test_arches "dli"              [mips_arch_list_matching mips3]
483     }
484     if $elf {
485         run_dump_test_arches "elf-jal"  [mips_arch_list_matching mips1]
486     } else {
487         run_dump_test "jal"
488     }
489     run_dump_test_arches "jal-mask-11"  [mips_arch_list_matching mips1]
490     run_dump_test_arches "jal-mask-12"  [mips_arch_list_matching mips1]
491     run_dump_test_arches "jal-mask-21"  [mips_arch_list_matching micromips]
492     run_dump_test_arches "jal-mask-22"  [mips_arch_list_matching micromips]
493     run_dump_test "eret-1"
494     run_dump_test "eret-2"
495     run_dump_test "eret-3"
496     run_dump_test_arches "24k-branch-delay-1" \
497         [mips_arch_list_matching mips1 !micromips]
498     run_dump_test_arches "24k-triple-stores-1" \
499         [mips_arch_list_matching fpisa5 !octeon !micromips]
500     run_dump_test_arches "24k-triple-stores-2" \
501         [mips_arch_list_matching mips2 !micromips]
502     run_dump_test_arches "24k-triple-stores-3" \
503         [mips_arch_list_matching mips2 !micromips]
504     run_dump_test_arches "24k-triple-stores-4" \
505         [mips_arch_list_matching mips2 !micromips]
506     run_dump_test_arches "24k-triple-stores-5" \
507         [mips_arch_list_matching mips1 !micromips]
508     run_dump_test_arches "24k-triple-stores-6" \
509         [mips_arch_list_matching mips2 !micromips]
510     run_dump_test_arches "24k-triple-stores-7" \
511         [mips_arch_list_matching mips2 !micromips]
512     run_dump_test_arches "24k-triple-stores-8" \
513         [mips_arch_list_matching mips1 !micromips]
514     run_dump_test_arches "24k-triple-stores-9" \
515         [mips_arch_list_matching mips1 !micromips]
516     run_dump_test_arches "24k-triple-stores-10" \
517         [mips_arch_list_matching mips1 !micromips]
518     if $elf {
519         run_dump_test_arches "24k-triple-stores-11" \
520             [mips_arch_list_matching mips1 !micromips]
521     }
522
523     if $elf {
524         run_dump_test_arches "jal-svr4pic" \
525                                         [mips_arch_list_matching mips1]
526         run_dump_test_arches "jal-svr4pic-noreorder" \
527                                         [mips_arch_list_matching mips1]
528     }
529     if $elf { run_dump_test "jal-xgot" }
530     run_list_test_arches "jal-range" "-32" [mips_arch_list_matching mips1]
531     if $has_newabi { run_dump_test "jal-newabi" }
532     if !$aout { run_dump_test "la" }
533     if $elf { run_dump_test "la-svr4pic" }
534     if $elf { run_dump_test "la-xgot" }
535     if $elf { run_dump_test "lca-svr4pic" }
536     if $elf { run_dump_test "lca-xgot" }
537     if !$aout {
538         # XXX FIXME: Has mips2 and later insns with mips1 disassemblies.
539         # (Should split and then use appropriate arch lists.)
540         run_dump_test_arches "lb"       [mips_arch_list_matching mips1 !mips2]
541     }
542     if $elf {
543         run_dump_test_arches "lb-svr4pic" \
544                                 [mips_arch_list_matching mips1 !gpr_ilocks]
545         run_dump_test_arches "lb-svr4pic-ilocks" [mips_arch_list_matching gpr_ilocks]
546     }
547     if $elf {
548         # Both versions specify the cpu, so we can run both regardless of
549         # the interlocking in the configured default cpu.
550         run_dump_test "lb-xgot"
551         run_dump_test "lb-xgot-ilocks"
552     }
553     if !$aout {
554         run_dump_test_arches "ld"       [mips_arch_list_matching mips1]
555         run_dump_test_arches "ld-forward" \
556                                         [mips_arch_list_matching mips1]
557         run_dump_test_arches "sd"       [mips_arch_list_matching mips1]
558         run_dump_test_arches "sd-forward" \
559                                         [mips_arch_list_matching mips1]
560         run_dump_test_arches "l_d"      [mips_arch_list_matching mips1]
561         run_dump_test_arches "l_d-forward" \
562                                         [mips_arch_list_matching mips1]
563         run_dump_test_arches "s_d"      [mips_arch_list_matching mips1]
564         run_dump_test_arches "s_d-forward" \
565                                         [mips_arch_list_matching mips1]
566         run_dump_test_arches "ldc1"     [mips_arch_list_matching mips2]
567         run_dump_test_arches "ldc1-forward" \
568                                         [mips_arch_list_matching mips2]
569         run_dump_test_arches "sdc1"     [mips_arch_list_matching mips2]
570         run_dump_test_arches "sdc1-forward" \
571                                         [mips_arch_list_matching mips2]
572         if $has_newabi {
573             run_dump_test_arches "ld-n32" \
574                                         [mips_arch_list_matching mips3]
575             run_dump_test_arches "ld-forward-n32" \
576                                         [mips_arch_list_matching mips3]
577             run_dump_test_arches "sd-n32" \
578                                         [mips_arch_list_matching mips3]
579             run_dump_test_arches "sd-forward-n32" \
580                                         [mips_arch_list_matching mips3]
581             run_dump_test_arches "l_d-n32" \
582                                         [mips_arch_list_matching mips3]
583             run_dump_test_arches "l_d-forward-n32" \
584                                         [mips_arch_list_matching mips3]
585             run_dump_test_arches "s_d-n32" \
586                                         [mips_arch_list_matching mips3]
587             run_dump_test_arches "s_d-forward-n32" \
588                                         [mips_arch_list_matching mips3]
589             run_dump_test_arches "ldc1-n32" \
590                                         [mips_arch_list_matching mips3]
591             run_dump_test_arches "ldc1-forward-n32" \
592                                         [mips_arch_list_matching mips3]
593             run_dump_test_arches "sdc1-n32" \
594                                         [mips_arch_list_matching mips3]
595             run_dump_test_arches "sdc1-forward-n32" \
596                                         [mips_arch_list_matching mips3]
597             run_dump_test_arches "ld-n64" \
598                                         [mips_arch_list_matching mips3]
599             run_dump_test_arches "ld-forward-n64" \
600                                         [mips_arch_list_matching mips3]
601             run_dump_test_arches "sd-n64" \
602                                         [mips_arch_list_matching mips3]
603             run_dump_test_arches "sd-forward-n64" \
604                                         [mips_arch_list_matching mips3]
605             run_dump_test_arches "l_d-n64" \
606                                         [mips_arch_list_matching mips3]
607             run_dump_test_arches "l_d-forward-n64" \
608                                         [mips_arch_list_matching mips3]
609             run_dump_test_arches "s_d-n64" \
610                                         [mips_arch_list_matching mips3]
611             run_dump_test_arches "s_d-forward-n64" \
612                                         [mips_arch_list_matching mips3]
613             run_dump_test_arches "ldc1-n64" \
614                                         [mips_arch_list_matching mips3]
615             run_dump_test_arches "ldc1-forward-n64" \
616                                         [mips_arch_list_matching mips3]
617             run_dump_test_arches "sdc1-n64" \
618                                         [mips_arch_list_matching mips3]
619             run_dump_test_arches "sdc1-forward-n64" \
620                                         [mips_arch_list_matching mips3]
621         }
622     }
623     if $elf { run_dump_test "ld-svr4pic" }
624     if $elf { run_dump_test "ld-xgot" }
625     run_dump_test_arches "li"           [mips_arch_list_matching mips1]
626     if !$aout { run_dump_test "lifloat" }
627     if $elf { run_dump_test "lif-svr4pic" }
628     if $elf { run_dump_test "lif-xgot" }
629     run_dump_test_arches "mips4"        [mips_arch_list_matching mips4]
630     run_dump_test_arches "mips4-fp"     [mips_arch_list_matching fpisa4]
631     run_list_test_arches "mips4-fp" "-32 -msoft-float" \
632                                         [mips_arch_list_matching fpisa4]
633     run_dump_test_arches "mips4-branch-likely" \
634                                         [mips_arch_list_matching mips4]
635     run_list_test_arches "mips4-branch-likely" "-32 -msoft-float" \
636                                         [mips_arch_list_matching mips4]
637     run_dump_test_arches "mips5-fp"     [mips_arch_list_matching fpisa5]
638     run_dump_test "mul"
639
640     run_dump_test_arches "rol"          [mips_arch_list_matching mips1 !ror]
641     run_dump_test_arches "rol-hw"       [mips_arch_list_matching ror]
642
643     run_dump_test_arches "rol64"        [mips_arch_list_matching gpr64 !ror]
644     run_dump_test_arches "rol64-hw"     [mips_arch_list_matching gpr64 ror]
645
646     if !$aout { run_dump_test "sb" }
647     run_dump_test "trunc"
648     if !$aout { run_dump_test "ulh" }
649     run_dump_test_arches "ulh2-eb"      [mips_arch_list_matching mips1]
650     run_dump_test_arches "ulh2-el"      [mips_arch_list_matching mips1]
651     if $elf { run_dump_test "ulh-svr4pic" }
652     if $elf { run_dump_test "ulh-xgot" }
653     if !$aout {
654         run_dump_test "ulw"
655         run_dump_test "uld"
656         run_dump_test "ush"
657         run_dump_test "usw"
658         run_dump_test "usd"
659     }
660     run_dump_test_arches "ulw2-eb" \
661                                 [mips_arch_list_matching mips1 !gpr_ilocks]
662     run_dump_test_arches "ulw2-eb-ilocks" [mips_arch_list_matching gpr_ilocks]
663     run_dump_test_arches "ulw2-el" \
664                                 [mips_arch_list_matching mips1 !gpr_ilocks]
665     run_dump_test_arches "ulw2-el-ilocks" [mips_arch_list_matching gpr_ilocks]
666
667     run_dump_test_arches "uld2-eb" [mips_arch_list_matching mips3]
668     run_dump_test_arches "uld2-el" [mips_arch_list_matching mips3]
669
670     # The mips16 test can only be run on ELF, because only ELF
671     # supports the necessary mips16 reloc.
672     if { $elf && !$no_mips16 } {
673         run_dump_test "mips16"
674         run_dump_test "mips16-64"
675         # Check MIPS16e extensions
676         run_dump_test_arches "mips16e" \
677                                 [mips_arch_list_matching mips32 !micromips]
678         # Check jalx handling
679         run_dump_test "mips16-jalx"
680         run_dump_test "mips-jalx"
681         run_dump_test "mips-jalx-2"
682         # Check MIPS16 HI16/LO16 relocations
683         run_dump_test "mips16-hilo"
684         if $has_newabi {
685             run_dump_test "mips16-hilo-n32"
686         }
687         run_dump_test "mips16-hilo-match"
688     }
689     run_dump_test "delay"
690     run_dump_test "nodelay"
691     run_dump_test "mips4010"
692     run_dump_test "mips4650"
693     run_dump_test "mips4100"
694     run_dump_test "vr4111"
695     run_dump_test "vr4120"
696     run_dump_test "vr4120-2"
697     run_dump_test "vr4130"
698     run_dump_test "vr5400"
699     run_dump_test "vr5500"
700     run_dump_test "rm7000"
701     run_dump_test "perfcount"
702     run_dump_test "lineno"
703     run_dump_test "sync"
704
705     run_dump_test_arches "mips32"       [mips_arch_list_matching mips32]
706     run_dump_test_arches "mips32-imm"   [mips_arch_list_matching mips32]
707
708     run_dump_test_arches "mips32-sf32"  [mips_arch_list_matching mips32]
709     run_list_test_arches "mips32-sf32" "-32 -msoft-float" \
710                                         [mips_arch_list_matching mips32]
711     run_dump_test_arches "mips32-cp2"   [mips_arch_list_matching mips32 \
712                                             !octeon]
713
714     run_dump_test_arches "mips32r2"     [mips_arch_list_matching mips32r2]
715     run_dump_test_arches "mips32r2-cp2" [mips_arch_list_matching mips32r2 \
716                                             !octeon]
717     run_dump_test_arches "mips32r2-fp32" \
718                                         [mips_arch_list_matching mips32r2]
719     run_list_test_arches "mips32r2-fp32" "-32 -msoft-float" \
720                                         [mips_arch_list_matching mips32r2]
721     run_list_test_arches "mips32r2-ill" "-32" \
722                         [mips_arch_list_matching mips32r2 gpr32]
723     run_list_test_arches "mips32r2-ill-fp64" "-mabi=o64" \
724                         [mips_arch_list_matching mips32r2 gpr64]
725     run_list_test_arches "mips32r2-ill-nofp" "-32 -msoft-float" \
726                         [mips_arch_list_matching mips32r2]
727
728     run_dump_test_arches "mips64"       [mips_arch_list_matching mips64]
729     run_dump_test_arches "mips64-cp2"   [mips_arch_list_matching mips64 \
730                                             !octeon]
731
732     run_dump_test_arches "mips64r2"     [mips_arch_list_matching mips64r2]
733     run_list_test_arches "mips64r2-ill" "" [mips_arch_list_matching mips64r2]
734
735     run_dump_test "set-arch"
736
737     if { !$addr32 } {
738         run_dump_test "mips64-mips3d"
739         run_dump_test_arches "mips64-mips3d-incl" [mips_arch_list_matching mips3d]
740
741         run_dump_test "mips64-mdmx"
742         run_dump_test "sb1-ext-mdmx"
743         run_dump_test "sb1-ext-ps"
744         run_dump_test "xlr-ext"
745     }
746
747     run_dump_test_arches "relax"        [mips_arch_list_matching mips2]
748     run_dump_test_arches "relax-at"     [mips_arch_list_matching mips2]
749     run_dump_test "relax-swap1-mips1"
750     run_dump_test "relax-swap1-mips2"
751     run_dump_test "relax-swap2"
752     run_list_test_arches "relax-bposge" "-mdsp -relax-branch" \
753                                         [mips_arch_list_matching mips64r2 \
754                                             !micromips]
755
756     run_list_test "illegal" "-32"
757     run_list_test "baddata1" "-32"
758     run_list_test "jalr" ""
759
760     # LOSE: As of 2002-02-08, the next 4 tests fail for target mips-ecoff.
761     # It's unknown whether they _should_ pass as-is, or whether different
762     # variants are needed for ELF and ECOFF.
763     run_dump_test "mips-gp32-fp32"
764     run_dump_test "mips-gp32-fp64"
765     run_dump_test "mips-gp64-fp32"
766     run_dump_test "mips-gp64-fp64"
767
768     if $elf {
769         # Make sure that -mcpu=FOO and -mFOO are equivalent.  Assemble a file
770         # containing 4650-specific instructions with -m4650 and -mcpu=4650,
771         # and verify that they're the same.  Specifically, we're checking
772         # that the EF_MIPS_MACH field is set, and that the 4650 'mul'
773         # instruction does get used.  In previous versions of GAS,
774         # only -mcpu=4650 would set the EF_MIPS_MACH field; -m4650 wouldn't.
775         run_dump_test "elf_e_flags1"
776         run_dump_test "elf_e_flags2"
777         run_dump_test "elf_e_flags3"
778         run_dump_test "elf_e_flags4"
779
780         # Check EF_MIPS_ARCH markings for each supported architecture.
781         run_dump_test "elf_arch_mips1"
782         run_dump_test "elf_arch_mips2"
783         run_dump_test "elf_arch_mips3"
784         run_dump_test "elf_arch_mips4"
785         run_dump_test "elf_arch_mips5"
786         run_dump_test "elf_arch_mips32"
787         run_dump_test "elf_arch_mips32r2"
788         run_dump_test "elf_arch_mips64"
789         run_dump_test "elf_arch_mips64r2"
790
791         # Verify that ASE markings are handled properly.
792         if { !$no_mips16 } {
793             run_dump_test "elf_ase_mips16"
794             run_dump_test "elf_ase_mips16-2"
795         }
796         if { !$no_micromips } {
797             run_dump_test "elf_ase_micromips"
798             run_dump_test "elf_ase_micromips-2"
799         }
800
801         run_dump_test "mips-gp32-fp32-pic"
802         run_dump_test "mips-gp32-fp64-pic"
803         run_dump_test "mips-gp64-fp32-pic"
804         run_dump_test "mips-gp64-fp64-pic"
805
806         run_dump_test "mips-abi32"
807         run_dump_test "mips-abi32-pic"
808         run_dump_test "mips-abi32-pic2"
809
810         run_dump_test "elf${el}-rel"
811         run_dump_test_arches "elf${el}-rel2" [mips_arch_list_matching gpr64]
812         run_dump_test "e32${el}-rel2"
813         run_dump_test "elf${el}-rel3"
814         run_dump_test_arches "elf-rel4" [mips_arch_list_matching gpr64]
815         run_dump_test "e32-rel4"
816         run_dump_test "elf-rel5"
817         run_dump_test "elf-rel6"
818         if $has_newabi {
819             run_dump_test "elf-rel6-n32"
820             run_dump_test "elf-rel6-n64"
821         }
822         run_dump_test "elf-rel7"
823         run_dump_test "elf-rel8"
824         run_dump_test "elf-rel8-mips16"
825         run_dump_test "elf-rel9"
826         run_dump_test "elf-rel9-mips16"
827         if $has_newabi {
828             run_dump_test "elf-rel10"
829             run_dump_test "elf-rel11"
830         }
831         run_dump_test "elf-rel12"
832         run_dump_test "elf-rel13"
833         run_dump_test "elf-rel13-mips16"
834         run_dump_test "elf-rel14"
835
836         if $has_newabi {
837             run_dump_test "elf-rel15"
838             run_dump_test "elf-rel16"
839
840             run_dump_test "elf-rel-got-n32"
841             run_dump_test "elf-rel-xgot-n32"
842             run_dump_test "elf-rel-got-n64"
843             run_dump_test "elf-rel-xgot-n64"
844         }
845         run_dump_test "elf-rel17"
846         if $has_newabi {
847             run_dump_test "elf-rel18"
848         }
849         run_dump_test "elf-rel19"
850         run_dump_test "elf-rel20"
851         if $has_newabi {
852             run_dump_test "elf-rel21"
853             run_dump_test "elf-rel22"
854             run_dump_test "elf-rel23"
855             run_dump_test "elf-rel23a"
856             run_dump_test "elf-rel23b"
857             run_dump_test "elf-rel24"
858         }
859
860         run_dump_test "elf-rel25"
861         run_dump_test "elf-rel25a"
862         run_dump_test "elf-rel26"
863
864         run_dump_test_arches "elf-rel27" [mips_arch_list_all]
865
866         if $has_newabi {
867             run_dump_test "elf-rel28-n32"
868             run_dump_test "elf-rel28-n64"
869         }
870
871         if { !$no_mips16 } {
872             run_dump_test "${tmips}mips${el}16-e"
873             run_dump_test "${tmips}mips${el}16-f"
874         }
875         run_dump_test "elf-consthilo"
876         run_dump_test "expr1"
877
878         run_list_test "tls-ill" "-32"
879         run_dump_test "tls-o32"
880         run_dump_test "jalr2"
881
882         run_dump_test_arches "aent"     [mips_arch_list_matching mips1]
883
884         run_dump_test_arches "branch-misc-4" \
885                                         [mips_arch_list_matching mips1]
886         run_dump_test_arches "branch-misc-4-64" \
887                                         [mips_arch_list_matching mips3]
888
889         run_dump_test_arches "loc-swap" [mips_arch_list_all]
890         run_dump_test_arches "loc-swap-dis" \
891                                         [mips_arch_list_all]
892     }
893
894     if $has_newabi {
895         run_dump_test "n32-consec"
896     }
897
898     # tests of objdump's ability to disassemble using different
899     # register names.
900     run_dump_test "gpr-names-numeric"
901     run_dump_test "gpr-names-32"
902     run_dump_test "gpr-names-n32"
903     run_dump_test "gpr-names-64"
904
905     run_dump_test "fpr-names-numeric"
906     run_dump_test "fpr-names-32"
907     run_dump_test "fpr-names-n32"
908     run_dump_test "fpr-names-64"
909
910     run_dump_test "cp0-names-numeric"
911     run_dump_test "cp0-names-r3000"
912     run_dump_test "cp0-names-r4000" \
913                   { { {name} {(r4000)} } { {objdump} {-M cp0-names=r4000} } }
914     run_dump_test "cp0-names-r4000" \
915                   { { {name} {(r4400)} } { {objdump} {-M cp0-names=r4400} } }
916     run_dump_test "cp0-names-mips32"
917     run_dump_test "cp0-names-mips32r2"
918     run_dump_test "cp0-names-mips64"
919     run_dump_test "cp0-names-mips64r2"
920     run_dump_test "cp0-names-sb1"
921
922     run_dump_test "cp0sel-names-numeric"
923     run_dump_test "cp0sel-names-mips32"
924     run_dump_test "cp0sel-names-mips32r2"
925     run_dump_test "cp0sel-names-mips64"
926     run_dump_test "cp0sel-names-mips64r2"
927     run_dump_test "cp0sel-names-sb1"
928
929     run_dump_test "hwr-names-numeric"
930     run_dump_test "hwr-names-mips32r2"
931     run_dump_test "hwr-names-mips64r2"
932
933     run_dump_test "ldstla-32"
934     run_dump_test "ldstla-32-mips3"
935     run_dump_test "ldstla-32-shared"
936     run_dump_test "ldstla-32-mips3-shared"
937     run_list_test "ldstla-32-1" "-mabi=32" \
938         "MIPS ld-st-la bad constants (ABI o32)"
939     run_list_test "ldstla-32-mips3-1" "-mabi=32" \
940         "MIPS ld-st-la bad constants (ABI o32, mips3)"
941     run_list_test "ldstla-32-1" "-KPIC -mabi=32" \
942         "MIPS ld-st-la bad constants (ABI o32, shared)"
943     run_list_test "ldstla-32-mips3-1" "-KPIC -mabi=32" \
944         "MIPS ld-st-la bad constants (ABI o32, mips3, shared)"
945     run_dump_test "ldstla-eabi64"
946     if $has_newabi {
947         run_dump_test "ldstla-n64"
948         run_dump_test "ldstla-n64-shared"
949         run_dump_test "ldstla-n64-sym32"
950     }
951
952     run_dump_test "macro-warn-1"
953     run_dump_test "macro-warn-2"
954     run_dump_test "macro-warn-3"
955     run_dump_test "macro-warn-4"
956     if $has_newabi {
957         run_dump_test "macro-warn-1-n32"
958         run_dump_test "macro-warn-2-n32"
959     }
960
961     run_dump_test "noat-1"
962     run_list_test "noat-2" ""
963     run_list_test "noat-3" ""
964     run_list_test "noat-4" ""
965     run_list_test "noat-5" ""
966     run_list_test "noat-6" ""
967     run_list_test "noat-7" ""
968
969     run_dump_test "at-1"
970     run_list_test "at-2" "-32 -mips1" "MIPS at-2"
971
972     run_dump_test "loongson-2e"
973     run_dump_test "loongson-2f"
974     run_dump_test "loongson-2f-2"
975     run_dump_test "loongson-2f-3"
976
977     run_dump_test "loongson-3a"
978     run_dump_test "loongson-3a-2"
979     run_dump_test "loongson-3a-3"
980
981     run_dump_test_arches "octeon"       [mips_arch_list_matching octeon]
982     run_list_test_arches "octeon-ill" "" \
983                                         [mips_arch_list_matching octeon]
984     run_dump_test_arches "octeon-pref"  [mips_arch_list_matching octeon]
985
986     run_dump_test "smartmips"
987     run_dump_test "mips32-dsp"
988     run_dump_test "mips32-dspr2"
989     run_dump_test "mips64-dsp"
990     run_dump_test "mips32-mt"
991
992     if { $elf && !$no_mips16 } {
993         run_dump_test "mips16-dwarf2"
994         if $has_newabi {
995             run_dump_test "mips16-dwarf2-n32"
996         }
997     }
998     if { !$no_mips16 } { 
999         run_dump_test "mips16e-jrc"
1000         run_dump_test "mips16e-save"
1001         run_dump_test "mips16e-64"
1002         run_list_test "mips16e-64" "-march=mips32 -32"
1003         run_dump_test "mips16-intermix"
1004     }
1005     run_dump_test "vxworks1"
1006     run_dump_test "vxworks1-xgot"
1007     run_dump_test "vxworks1-el"
1008     run_dump_test "vxworks1-xgot-el"
1009
1010     run_dump_test "noreorder"
1011     run_dump_test "align"
1012     run_dump_test "align2"
1013     run_dump_test "align2-el"
1014     run_dump_test "odd-float"
1015
1016     run_list_test_arches "mips-macro-ill-sfp" "-32 -msingle-float" \
1017                                         [mips_arch_list_matching mips2]
1018     run_list_test_arches "mips-macro-ill-nofp" "-32 -msoft-float" \
1019                                         [mips_arch_list_matching mips2]
1020
1021     run_list_test_arches "mips-hard-float-flag" \
1022         "-32 -msoft-float -mhard-float" \
1023                                         [mips_arch_list_matching mips1]
1024     run_list_test_arches "mips-double-float-flag" \
1025         "-32 -msingle-float -mdouble-float" \
1026                                         [mips_arch_list_matching mips1]
1027
1028     run_dump_test "mips16-vis-1"
1029     run_dump_test "call-nonpic-1"
1030     run_dump_test "mips32-sync"
1031     run_dump_test_arches "mips32r2-sync" \
1032                                         [mips_arch_list_matching mips32r2]
1033     run_dump_test_arches "alnv_ps-swap" [mips_arch_list_matching fpisa5]
1034     run_dump_test_arches "cache" [lsort -dictionary -unique [concat \
1035                                         [mips_arch_list_matching mips3] \
1036                                         [mips_arch_list_matching mips32] ] ]
1037     run_dump_test_arches "daddi"        [mips_arch_list_matching mips3]
1038     run_dump_test_arches "pref" [lsort -dictionary -unique [concat \
1039                                         [mips_arch_list_matching mips4] \
1040                                         [mips_arch_list_matching mips32] ] ]
1041
1042     if $has_newabi { run_dump_test "cfi-n64-1" }
1043
1044     run_dump_test "pr12915"
1045     run_dump_test "reginfo-1a"
1046     run_dump_test "reginfo-1b"
1047
1048     if { !$no_micromips } {
1049         run_dump_test "micromips"
1050         run_dump_test "micromips-trap"
1051         run_list_test "micromips-size-0" \
1052             "-32 -march=mips64 -mmicromips" "microMIPS instruction size 0"
1053         run_dump_test "micromips-size-1"
1054         run_dump_test "micromips-branch-relax"
1055         run_dump_test "micromips-branch-relax-pic"
1056         run_dump_test "micromips-branch-delay"
1057     }
1058
1059     run_dump_test_arches "mcu"          [mips_arch_list_matching mips32r2 \
1060                                             !octeon]
1061 }