gas/testsuite/gas/mips/mips.exp

   1 # Copyright 2012
   2 # Free Software Foundation, Inc.
   3
   4 # This program is free software; you can redistribute it and/or modify
   5 # it under the terms of the GNU General Public License as published by
   6 # the Free Software Foundation; either version 3 of the License, or
   7 # (at your option) any later version.
   8 #
   9 # This program is distributed in the hope that it will be useful,
  10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12 # GNU General Public License for more details.
  13 #
  14 # You should have received a copy of the GNU General Public License
  15 # along with this program; if not, write to the Free Software
  16 # Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.
  17
  18 #
  19 # Some generic MIPS tests
  20 #
  21
  22 # When adding a new test to this file, try to do the following things:
  23 #
  24 # * If testing assembly and disassembly of code, don't forget to test
  25 # the actual bit encodings of the instructions (using the
  26 # --show-raw-insn flag to objdump).
  27 #
  28 # * Try to run the test for as many architectures as appropriate,
  29 # using the "run_dump_test_arches" or "run_list_test_arches" functions,
  30 # along with the output from a call to "mips_arch_list_matching."
  31 #
  32 # * Be sure to compare the test output before and after your testsuite
  33 # changes, to verify that existing and new tests were run as expected.
  34 # Look for expect ERROR messages in the testsuite .log file to make sure
  35 # the new expect code did not contain errors.
  36
  37 # To add support for a new CPU to this file, add an appropriate entry
  38 # to the sequence of "mips_arch_create" function calls below, and test
  39 # the result.  The new CPU should automatically be used when running
  40 # various tests.  If the new CPU is the default CPU for any tool
  41 # targets, make sure the call to "mips_arch_create" reflects that fact.
  42
  43
  44 # "LOSE" marks information about tests which fail at a particular point
  45 # in time, but which are not XFAILed.  Either they used to pass
  46 # and indicate either regressions or the need to tweak the tests to keep
  47 # up the with code, or they are new tests and it is unknown whether or not
  48 # they should pass as-is for the given object formats.
  49
  50
  51 # The functions below create and manipulate an "architecture data
  52 # array" which contains entries for each MIPS architecture (or CPU)
  53 # known to these tests.  The array contains the following information
  54 # for each architecture, indexed by the name of the architecture
  55 # described by the entry:
  56 #
  57 # displayname: The name of the entry to be used for pretty-printing.
  58 #
  59 # gprsize: The size in bits of General Purpose Registers provided by
  60 # the architecture (must be 32 or 64).
  61 #
  62 # props: A list of text strings which are associated with the
  63 # architecture.  These include the architecture name as well as
  64 # information about what instructions the CPU supports.  When matching
  65 # based on properties, an additional property is added to the normal
  66 # property list, "gpr<gprsize>" so that tests can match CPUs which
  67 # have GPRs of a specific size.  The following properties are most
  68 # useful when matching properties for generic (i.e., not CPU-specific)
  69 # tests:
  70 #
  71 #       mips1, mips2, mips3, mips4, mips5, mips32, mips64
  72 #               The architecture includes the instructions defined
  73 #               by that MIPS ISA.
  74 #
  75 #       fpisa3, fpisa4, fpisa5
  76 #               The architecture includes the floating-point
  77 #               instructions defined by that MIPS ISA.
  78 #
  79 #       gpr_ilocks
  80 #               The architecture interlocks GPRs accesses.  (That is,
  81 #               there are no load delay slots.)
  82 #
  83 #       mips3d  The architecture includes the MIPS-3D ASE.
  84 #
  85 #       ror     The architecture includes hardware rotate instructions.
  86 #
  87 #       gpr32, gpr64
  88 #               The architecture provides 32- or 64-bit General Purpose
  89 #               Registers.
  90 #
  91 # as_flags: The assembler flags used when assembling tests for this
  92 # architecture.
  93 #
  94 # objdump_flags: The objdump flags used when disassembling tests for
  95 # this architecture.
  96 #
  97 # Most entries in the architecture array will have values in all of
  98 # the fields above.  One entry, "default" represents the default CPU
  99 # based on the target of the assembler being built.  If always has
 100 # empty "as_flags" and "objdump_flags."
 101
 102 # mips_arch_init
 103 #
 104 # This function initializes the architecture data array ("mips_arches")
 105 # to be empty.
 106 proc mips_arch_init {} {
 107     global mips_arches
 108
 109     # Catch because the variable won't be set the first time through.
 110     catch {unset mips_arches}
 111 }
 112
 113 # mips_arch_create ARCH GPRSIZE EXTENDS PROPS AS_FLAGS OBJDUMP_FLAGS \
 114 #                  (optional:) DEFAULT_FOR_TARGETS
 115 #
 116 # This function creates a new entry in the architecture data array,
 117 # for the architecture or CPU named ARCH, and fills in the entry
 118 # according to the rest of the arguments.
 119 #
 120 # The new entry's property list is initialized to contain ARCH, any
 121 # properties specified by PROPS, and the properties associated with
 122 # the entry specified by EXTENDS.  (The new architecture is considered
 123 # to extend the capabilities provided by that architecture.)
 124 #
 125 # If DEFAULT_FOR_TARGETS is specified, it is a list of targets for which
 126 # this architecture is the default architecture.  If "istarget" returns
 127 # true for any of the targets in the list, a "default" entry will be
 128 # added to the architecture array which indicates that ARCH is the default
 129 # architecture.
 130 proc mips_arch_create {arch gprsize extends props as_flags objdump_flags
 131                        {default_for_targets {}}} {
 132     global mips_arches
 133
 134     if { [info exists mips_arches($arch)] } {
 135              error "mips_arch_create: arch \"$arch\" already exists"
 136     }
 137     if { $gprsize != 32 && $gprsize != 64 } {
 138         error "mips_arch_create: invalid GPR size $gprsize"
 139     }
 140
 141     set archdata(displayname) $arch
 142     set archdata(gprsize) $gprsize
 143     set archdata(as_flags) $as_flags
 144     set archdata(objdump_flags) $objdump_flags
 145     set archdata(props) $arch
 146     eval lappend archdata(props) $props
 147     if { [string length $extends] != 0 } {
 148         eval lappend archdata(props) [mips_arch_properties $extends 0]
 149     }
 150
 151     set mips_arches($arch) [array get archdata]
 152
 153     # Set as default if appropriate.
 154     foreach target $default_for_targets {
 155         if { [istarget $target] } {
 156             if { [info exists mips_arches(default)] } {
 157                 error "mips_arch_create: default arch already exists"
 158             }
 159
 160             set archdata(displayname) "default = $arch"
 161             set archdata(as_flags) ""
 162             set archdata(objdump_flags) ""
 163
 164             set mips_arches(default) [array get archdata]
 165             break
 166         }
 167     }
 168 }
 169
 170 # mips_arch_destroy ARCH
 171 #
 172 # The opposite of the above.  This function removes an entry from
 173 # the architecture data array, for the architecture or CPU named ARCH.
 174
 175 proc mips_arch_destroy {arch} {
 176     global mips_arches
 177
 178     if { [info exists mips_arches($arch)] } {
 179         unset mips_arches($arch)
 180     }
 181 }
 182
 183 # mips_arch_list_all
 184 #
 185 # This function returns the list of all names of entries in the
 186 # architecture data array (including the default entry, if a default
 187 # is known).
 188 proc mips_arch_list_all {} {
 189     global mips_arches
 190     return [lsort -dictionary [array names mips_arches]]
 191 }
 192
 193 # mips_arch_data ARCH
 194 #
 195 # This function returns the information associated with ARCH
 196 # in the architecture data array, in "array get" form.
 197 proc mips_arch_data {arch} {
 198     global mips_arches
 199
 200     if { ! [info exists mips_arches($arch)] } {
 201         error "mips_arch_data: unknown arch \"$arch\""
 202     }
 203     return $mips_arches($arch)
 204 }
 205
 206 # mips_arch_displayname ARCH
 207 #
 208 # This function returns the printable name associated with ARCH in
 209 # the architecture data array.
 210 proc mips_arch_displayname {arch} {
 211     array set archdata [mips_arch_data $arch]
 212     return $archdata(displayname)
 213 }
 214
 215 # mips_arch_properties ARCH (optional:) INCLUDE_GPRSIZE
 216 #
 217 # This function returns the property list associated with ARCH in the
 218 # architecture data array, including the "canonical" target name as the
 219 # first element.
 220 #
 221 # If INCLUDE_GPRSIZE is non-zero, an additional "gpr32" or "gpr64"
 222 # property will be returned as part of the list based on the
 223 # architecture's GPR size.
 224 proc mips_arch_properties {arch {include_gprsize 1}} {
 225     array set archdata [mips_arch_data $arch]
 226     set props $archdata(props)
 227     if { $include_gprsize } {
 228         lappend props gpr$archdata(gprsize)
 229     }
 230     return $props
 231 }
 232
 233 # mips_arch_as_flags ARCH
 234 #
 235 # This function returns the assembler flags associated with ARCH in
 236 # the architecture data array.
 237 proc mips_arch_as_flags {arch} {
 238     array set archdata [mips_arch_data $arch]
 239     return $archdata(as_flags)
 240 }
 241
 242 # mips_arch_objdump_flags ARCH
 243 #
 244 # This function returns the objdump disassembly flags associated with
 245 # ARCH in the architecture data array.
 246 proc mips_arch_objdump_flags {arch} {
 247     array set archdata [mips_arch_data $arch]
 248     return $archdata(objdump_flags)
 249 }
 250
 251 # mips_arch_matches ARCH PROPMATCHLIST
 252 #
 253 # This function returns non-zero if ARCH matches the set of properties
 254 # described by PROPMATCHLIST.  Each entry in PROPMATCHLIST can either
 255 # be the name of a property which must be matched, or "!" followed by
 256 # the name of a property which must not be matched.  ARCH matches
 257 # PROPMATCHLIST if and only if all of the conditions specified by
 258 # PROPMATCHLIST are satisfied.
 259 proc mips_arch_matches {arch propmatchlist} {
 260     foreach pm $propmatchlist {
 261         if { [string match {!*} $pm] } {
 262             # fail if present.
 263             set inverted 1
 264             set p [string range $pm 1 end]
 265         } {
 266             # fail if not present.
 267             set inverted 0
 268             set p $pm
 269         }
 270
 271         set loc [lsearch -exact [mips_arch_properties $arch] $p]
 272
 273         # required-absent and found, or required-present and not found: fail.
 274         if { ($inverted && $loc != -1) || (! $inverted && $loc == -1) } {
 275             return 0
 276         }
 277     }
 278     return 1
 279 }
 280
 281 # mips_arch_list_matching ARGS
 282 #
 283 # This function returns a list of all architectures which match
 284 # the conditions described by its arguments.  Its arguments are
 285 # taken as a list and used as the PROPMATCHLIST in a call to
 286 # "mips_arch_matches" for each known architecture.
 287 proc mips_arch_list_matching {args} {
 288     set l ""
 289     foreach arch [mips_arch_list_all] {
 290         # For now, don't match default arch until we know what its
 291         # properties actually are.
 292         if { [string compare $arch default] == 0
 293              && [string length [mips_arch_properties default]] == 0} {
 294             continue
 295         }
 296         if { [mips_arch_matches $arch $args] } {
 297             lappend l $arch
 298         }
 299     }
 300     return $l
 301 }
 302
 303
 304 # The functions below facilitate running various types of tests.
 305
 306 # run_dump_test_arch NAME OPTS ARCH
 307 #
 308 # Invoke "run_dump_test" for test NAME with additional assembler options OPTS.
 309 # Add the assembler and disassembler flags that are associated with
 310 # architecture ARCH.
 311 #
 312 # You can override the expected output for particular architectures
 313 # and file formats.  The possible test names are, in order of preference:
 314 #
 315 # 1. CARCH@FORMAT@NAME.d
 316 # 2. CARCH@NAME.d
 317 # 3. FORMAT@NAME.d
 318 # 4. NAME.d
 319 #
 320 # where CARCH is the "canonical" name of architecture ARCH as recorded
 321 # in its associated property list, and where FORMAT is the target's
 322 # file format (one of "elf", "ecoff" or "aout").
 323 proc run_dump_test_arch { name opts arch } {
 324     upvar elf elf ecoff ecoff aout aout
 325     global subdir srcdir
 326
 327     set format [expr { $elf ? "elf" : $ecoff ? "ecoff" : "aout" }]
 328     set proparch [lindex [mips_arch_properties $arch 0] 0]
 329     set prefixes [list ${proparch}@${format}@ ${proparch}@ ]
 330     if { [ string match "octeon*" $proparch ] && $proparch != "octeon" } {
 331       lappend prefixes octeon@
 332       lappend prefixes octeon@${format}@
 333     }
 334     lappend prefixes ${format}@
 335     foreach prefix ${prefixes} {
 336         set archname ${prefix}${name}
 337         if { [file exists "$srcdir/$subdir/${archname}.d"] } {
 338             set name $archname
 339             break
 340         }
 341     }
 342
 343     if [catch {run_dump_test $name \
 344                    "{name    {([concat $opts [mips_arch_displayname $arch]])}}
 345                     {objdump {[mips_arch_objdump_flags $arch]}}
 346                     {as      {[concat $opts [mips_arch_as_flags $arch]]}}"} rv] {
 347         perror "$rv"
 348         untested "$subdir/$name ($arch)"
 349     }
 350 }
 351
 352 # run_dump_test_arches NAME [OPTS] ARCH_LIST
 353 #
 354 # Invoke "run_dump_test_arch" for test NAME, for each architecture
 355 # listed in ARCH_LIST.  OPTS, if specified, is a list of additional
 356 # assembler options that should be used for all architectures.
 357 proc run_dump_test_arches { name args } {
 358     upvar elf elf ecoff ecoff aout aout
 359     set opts ""
 360     if { [llength $args] > 1 } {
 361         set opts [lindex $args 0]
 362         set args [lrange $args 1 end]
 363     }
 364     set arch_list [lindex $args 0]
 365     foreach arch $arch_list {
 366         run_dump_test_arch $name $opts $arch
 367     }
 368 }
 369
 370 # run_list_test_arch NAME OPTS ARCH
 371 #
 372 # Invoke "run_list_test" for test NAME with additional assembler options OPTS.
 373 # Add the assembler flags that are associated with architecture ARCH.
 374 proc run_list_test_arch { name opts arch } {
 375     global subdir
 376
 377     set testname "MIPS $name ([concat $opts [mips_arch_displayname $arch]])"
 378     if [catch {run_list_test \
 379                    $name \
 380                    [concat $opts [mips_arch_as_flags $arch]] \
 381                    $testname} rv] {
 382         perror "$rv"
 383         untested "$testname"
 384     }
 385 }
 386
 387 # run_list_test_arches NAME [OPTS] ARCH_LIST
 388 #
 389 # Invoke "run_list_test_arch" for test NAME, for each architecture listed
 390 # in ARCH_LIST.  OPTS, if specified, is a list of additional assembler
 391 # options that should be used for all architectures.
 392 proc run_list_test_arches { name args } {
 393     set opts ""
 394     if { [llength $args] > 1 } {
 395         set opts [lindex $args 0]
 396         set args [lrange $args 1 end]
 397     }
 398     set arch_list [lindex $args 0]
 399     foreach arch $arch_list {
 400         run_list_test_arch "$name" "$opts" "$arch"
 401     }
 402 }
 403
 404
 405 # Create the architecture data array by providing data for all
 406 # known architectures.
 407 #
 408 # Note that several targets pick default CPU based on ABI.  We
 409 # can't easily handle that; do NOT list those targets as defaulting
 410 # to any architecture.
 411 mips_arch_init
 412 mips_arch_create mips1  32      {}      {} \
 413                         { -march=mips1 -mtune=mips1 } { -mmips:3000 }
 414 mips_arch_create mips2  32      mips1   { gpr_ilocks } \
 415                         { -march=mips2 -mtune=mips2 } { -mmips:6000 }
 416 mips_arch_create mips3  64      mips2   { fpisa3 } \
 417                         { -march=mips3 -mtune=mips3 } { -mmips:4000 }
 418 mips_arch_create mips4  64      mips3   { fpisa4 } \
 419                         { -march=mips4 -mtune=mips4 } { -mmips:8000 }
 420 mips_arch_create mips5  64      mips4   { fpisa5 } \
 421                         { -march=mips5 -mtune=mips5 } { -mmips:mips5 }
 422 mips_arch_create mips32 32      mips2   {} \
 423                         { -march=mips32 -mtune=mips32 } { -mmips:isa32 } \
 424                         { mipsisa32-*-* mipsisa32el-*-* }
 425 mips_arch_create mips32r2 32    mips32  { fpisa3 fpisa4 fpisa5 ror } \
 426                         { -march=mips32r2 -mtune=mips32r2 } \
 427                         { -mmips:isa32r2 } \
 428                         { mipsisa32r2-*-* mipsisa32r2el-*-* }
 429 mips_arch_create mips64 64      mips5   { mips32 } \
 430                         { -march=mips64 -mtune=mips64 } { -mmips:isa64 } \
 431                         { mipsisa64-*-* mipsisa64el-*-* }
 432 mips_arch_create mips64r2 64    mips64  { mips32r2 ror } \
 433                         { -march=mips64r2 -mtune=mips64r2 } \
 434                         { -mmips:isa64r2 } \
 435                         { mipsisa64r2-*-* mipsisa64r2el-*-* }
 436 mips_arch_create mips16 32      {}      {} \
 437                         { -march=mips1 -mips16 } { -mmips:16 }
 438 mips_arch_create micromips 64   mips64r2 {} \
 439                         { -march=mips64 -mmicromips } {}
 440 mips_arch_create r3000  32      mips1   {} \
 441                         { -march=r3000 -mtune=r3000 } { -mmips:3000 }
 442 mips_arch_create r3900  32      mips1   { gpr_ilocks } \
 443                         { -march=r3900 -mtune=r3900 } { -mmips:3900 } \
 444                         { mipstx39-*-* mipstx39el-*-* }
 445 mips_arch_create r4000  64      mips3   {} \
 446                         { -march=r4000 -mtune=r4000 } { -mmips:4000 }
 447 mips_arch_create vr5400 64      mips4   { ror } \
 448                         { -march=vr5400 -mtune=vr5400 } { -mmips:5400 }
 449 mips_arch_create sb1    64      mips64  { mips3d } \
 450                         { -march=sb1 -mtune=sb1 } { -mmips:sb1 } \
 451                         { mipsisa64sb1-*-* mipsisa64sb1el-*-* }
 452 mips_arch_create octeon 64      mips64r2 {} \
 453                         { -march=octeon -mtune=octeon } { -mmips:octeon } \
 454                         { mips64octeon*-*-* }
 455 mips_arch_create octeonp 64     octeon {} \
 456                         { -march=octeon+ -mtune=octeon+ } { -mmips:octeon+ } \
 457                         { }
 458 mips_arch_create octeon2 64     octeonp {} \
 459                         { -march=octeon2 -mtune=octeon2 } { -mmips:octeon2 } \
 460                         { }
 461 mips_arch_create xlr    64      mips64  {} \
 462                         { -march=xlr -mtune=xlr } { -mmips:xlr }
 463
 464 #
 465 # And now begin the actual tests!  VxWorks uses RELA rather than REL
 466 # relocations, so most of the generic dump tests will not work there.
 467 #
 468 if { [istarget mips*-*-vxworks*] } {
 469     run_dump_test "vxworks1"
 470     run_dump_test "vxworks1-xgot"
 471     run_dump_test "vxworks1-el"
 472     run_dump_test "vxworks1-xgot-el"
 473 } elseif { [istarget mips*-*-*] } {
 474     set elf [expr [istarget *-*-elf*] || [istarget *-*-irix5*] || [istarget *-*-irix6* ] || [istarget *-*-linux*] || [istarget *-*-netbsd*] ]
 475     set ecoff [expr [istarget *-*-ecoff*] || [istarget *-*-ultrix*] || [istarget *-*-irix\[1-4\]*] ]
 476     set aout [expr [istarget *-*-bsd*] || [istarget *-*-openbsd*] ]
 477     set addr32 [expr [istarget mipstx39*-*-*] || [istarget mips-*-linux*] || [istarget mipsel-*-linux*] || [istarget mips*-*-ecoff]]
 478     set has_newabi [expr [istarget *-*-irix6*] || [istarget mips*-*-linux*] || [istarget mips*-sde-elf*]]
 479     set no_mips16 [expr !$elf]
 480     set no_micromips [expr !$elf]
 481
 482     if { [istarget "mips*-*-*linux*"] || [istarget "mips*-sde-elf*"] } then {
 483         set tmips "t"
 484     } else {
 485         set tmips ""
 486     }
 487     if [istarget mips*el-*-*] {
 488         set el "el"
 489     } {
 490         set el ""
 491     }
 492     if { $no_mips16 } {
 493         mips_arch_destroy mips16
 494     }
 495     if { $no_micromips } {
 496         mips_arch_destroy micromips
 497     }
 498
 499     run_dump_test_arches "dot-1"        [mips_arch_list_matching mips1]
 500     run_dump_test_arches "abs"          [mips_arch_list_matching mips1]
 501     run_dump_test_arches "add"          [mips_arch_list_matching mips1]
 502     run_dump_test_arches "and"          [mips_arch_list_matching mips1]
 503     run_dump_test_arches "mips1-fp"     [mips_arch_list_matching mips1]
 504     run_list_test_arches "mips1-fp" "-32 -msoft-float" \
 505                                         [mips_arch_list_matching mips1]
 506     run_dump_test "break20"
 507     run_dump_test "trap20"
 508
 509     # LOSE: As of 2002-02-08, "beq" through "bltu" fail for target mips-ecoff.
 510     # See http://sources.redhat.com/ml/binutils/2001-10/msg00418.html for
 511     # more information.  Not sure if the fixes there are correct; should
 512     # branches to external labels be allowed for ECOFF?
 513     run_dump_test_arches "beq"          [mips_arch_list_matching mips1]
 514     run_dump_test_arches "bge"          [mips_arch_list_matching mips1]
 515     run_dump_test_arches "bgeu"         [mips_arch_list_matching mips1]
 516     run_dump_test_arches "blt"          [mips_arch_list_matching mips1]
 517     run_dump_test_arches "bltu"         [mips_arch_list_matching mips1]
 518     run_dump_test_arches "branch-likely" [mips_arch_list_matching mips2]
 519     run_dump_test_arches "branch-misc-1" [mips_arch_list_matching mips1]
 520     run_dump_test_arches "branch-misc-2" [mips_arch_list_matching mips1]
 521     run_dump_test_arches "branch-misc-2pic" [mips_arch_list_matching mips1]
 522     run_dump_test_arches "branch-misc-2-64" [mips_arch_list_matching mips3]
 523     run_dump_test_arches "branch-misc-2pic-64" [mips_arch_list_matching mips3]
 524     run_dump_test "branch-misc-3"
 525     run_dump_test "branch-swap"
 526
 527     if $elf {
 528         # Sweep a range of branch offsets so that it hits a position where
 529         # it is at the beginning of a frag and then swapped with a 16-bit
 530         # instruction from the preceding frag.  The offset will be somewhere
 531         # close below 4096 as this is the default obstack size limit that
 532         # we use and some space will have been already consumed.  The exact
 533         # amount depends on the host's programming model.
 534         for { set count 960 } { $count <= 1024 } { incr count } {
 535             run_list_test "branch-swap-2" "--defsym count=$count" \
 536                 "MIPS branch swapping ($count)"
 537         }
 538     }
 539
 540     run_dump_test "div"
 541
 542     if { !$addr32 } {
 543         run_dump_test_arches "dli"              [mips_arch_list_matching mips3]
 544     }
 545     if $elf {
 546         run_dump_test_arches "elf-jal"  [mips_arch_list_matching mips1]
 547     } else {
 548         run_dump_test "jal"
 549     }
 550     run_dump_test_arches "jal-mask-11"  [mips_arch_list_matching mips1]
 551     run_dump_test_arches "jal-mask-12"  [mips_arch_list_matching mips1]
 552     run_dump_test_arches "jal-mask-21"  [mips_arch_list_matching micromips]
 553     run_dump_test_arches "jal-mask-22"  [mips_arch_list_matching micromips]
 554     run_dump_test "eret-1"
 555     run_dump_test "eret-2"
 556     run_dump_test "eret-3"
 557     run_dump_test_arches "24k-branch-delay-1" \
 558                                         [mips_arch_list_matching mips1]
 559     run_dump_test_arches "24k-triple-stores-1" \
 560                                 [mips_arch_list_matching fpisa5 !octeon]
 561     run_dump_test_arches "24k-triple-stores-2" \
 562                                         [mips_arch_list_matching mips2]
 563     run_dump_test_arches "24k-triple-stores-3" \
 564                                         [mips_arch_list_matching mips2]
 565     run_dump_test_arches "24k-triple-stores-4" \
 566                                         [mips_arch_list_matching mips2]
 567     run_dump_test_arches "24k-triple-stores-5" \
 568                                         [mips_arch_list_matching mips1]
 569     run_dump_test_arches "24k-triple-stores-6" \
 570                                         [mips_arch_list_matching mips2]
 571     run_dump_test_arches "24k-triple-stores-7" \
 572                                         [mips_arch_list_matching mips2]
 573     run_dump_test_arches "24k-triple-stores-8" \
 574                                         [mips_arch_list_matching mips1]
 575     run_dump_test_arches "24k-triple-stores-9" \
 576                                         [mips_arch_list_matching mips1]
 577     run_dump_test_arches "24k-triple-stores-10" \
 578                                         [mips_arch_list_matching mips1]
 579     if $elf {
 580         run_dump_test_arches "24k-triple-stores-11" \
 581                                         [mips_arch_list_matching mips1]
 582     }
 583
 584     if $elf {
 585         run_dump_test_arches "jal-svr4pic" \
 586                                         [mips_arch_list_matching mips1]
 587         run_dump_test_arches "jal-svr4pic-noreorder" \
 588                                         [mips_arch_list_matching mips1]
 589     }
 590     if $elf { run_dump_test "jal-xgot" }
 591     run_list_test_arches "jal-range" "-32" [mips_arch_list_matching mips1]
 592     if $has_newabi { run_dump_test "jal-newabi" }
 593     if !$aout { run_dump_test "la" }
 594     if $elf { run_dump_test "la-svr4pic" }
 595     if $elf { run_dump_test "la-xgot" }
 596     if $elf { run_dump_test "lca-svr4pic" }
 597     if $elf { run_dump_test "lca-xgot" }
 598     if !$aout {
 599         # XXX FIXME: Has mips2 and later insns with mips1 disassemblies.
 600         # (Should split and then use appropriate arch lists.)
 601         run_dump_test_arches "lb"       [mips_arch_list_matching mips1 !mips2]
 602     }
 603     if $elf {
 604         run_dump_test_arches "lb-svr4pic" \
 605                                 [mips_arch_list_matching mips1 !gpr_ilocks]
 606         run_dump_test_arches "lb-svr4pic-ilocks" [mips_arch_list_matching gpr_ilocks]
 607     }
 608     if $elf {
 609         # Both versions specify the cpu, so we can run both regardless of
 610         # the interlocking in the configured default cpu.
 611         run_dump_test "lb-xgot"
 612         run_dump_test "lb-xgot-ilocks"
 613     }
 614     if !$aout {
 615         run_dump_test_arches "ld"       [mips_arch_list_matching mips1]
 616         run_dump_test_arches "ld-forward" \
 617                                         [mips_arch_list_matching mips1]
 618         run_dump_test_arches "sd"       [mips_arch_list_matching mips1]
 619         run_dump_test_arches "sd-forward" \
 620                                         [mips_arch_list_matching mips1]
 621         run_dump_test_arches "l_d"      [mips_arch_list_matching mips1]
 622         run_dump_test_arches "l_d-forward" \
 623                                         [mips_arch_list_matching mips1]
 624         run_dump_test_arches "s_d"      [mips_arch_list_matching mips1]
 625         run_dump_test_arches "s_d-forward" \
 626                                         [mips_arch_list_matching mips1]
 627         run_dump_test_arches "ldc1"     [mips_arch_list_matching mips2]
 628         run_dump_test_arches "ldc1-forward" \
 629                                         [mips_arch_list_matching mips2]
 630         run_dump_test_arches "sdc1"     [mips_arch_list_matching mips2]
 631         run_dump_test_arches "sdc1-forward" \
 632                                         [mips_arch_list_matching mips2]
 633         if $has_newabi {
 634             run_dump_test_arches "ld-n32" \
 635                                         [mips_arch_list_matching mips3]
 636             run_dump_test_arches "ld-forward-n32" \
 637                                         [mips_arch_list_matching mips3]
 638             run_dump_test_arches "sd-n32" \
 639                                         [mips_arch_list_matching mips3]
 640             run_dump_test_arches "sd-forward-n32" \
 641                                         [mips_arch_list_matching mips3]
 642             run_dump_test_arches "l_d-n32" \
 643                                         [mips_arch_list_matching mips3]
 644             run_dump_test_arches "l_d-forward-n32" \
 645                                         [mips_arch_list_matching mips3]
 646             run_dump_test_arches "s_d-n32" \
 647                                         [mips_arch_list_matching mips3]
 648             run_dump_test_arches "s_d-forward-n32" \
 649                                         [mips_arch_list_matching mips3]
 650             run_dump_test_arches "ldc1-n32" \
 651                                         [mips_arch_list_matching mips3]
 652             run_dump_test_arches "ldc1-forward-n32" \
 653                                         [mips_arch_list_matching mips3]
 654             run_dump_test_arches "sdc1-n32" \
 655                                         [mips_arch_list_matching mips3]
 656             run_dump_test_arches "sdc1-forward-n32" \
 657                                         [mips_arch_list_matching mips3]
 658             run_dump_test_arches "ld-n64" \
 659                                         [mips_arch_list_matching mips3]
 660             run_dump_test_arches "ld-forward-n64" \
 661                                         [mips_arch_list_matching mips3]
 662             run_dump_test_arches "sd-n64" \
 663                                         [mips_arch_list_matching mips3]
 664             run_dump_test_arches "sd-forward-n64" \
 665                                         [mips_arch_list_matching mips3]
 666             run_dump_test_arches "l_d-n64" \
 667                                         [mips_arch_list_matching mips3]
 668             run_dump_test_arches "l_d-forward-n64" \
 669                                         [mips_arch_list_matching mips3]
 670             run_dump_test_arches "s_d-n64" \
 671                                         [mips_arch_list_matching mips3]
 672             run_dump_test_arches "s_d-forward-n64" \
 673                                         [mips_arch_list_matching mips3]
 674             run_dump_test_arches "ldc1-n64" \
 675                                         [mips_arch_list_matching mips3]
 676             run_dump_test_arches "ldc1-forward-n64" \
 677                                         [mips_arch_list_matching mips3]
 678             run_dump_test_arches "sdc1-n64" \
 679                                         [mips_arch_list_matching mips3]
 680             run_dump_test_arches "sdc1-forward-n64" \
 681                                         [mips_arch_list_matching mips3]
 682         }
 683     }
 684     if $elf { run_dump_test "ld-svr4pic" }
 685     if $elf { run_dump_test "ld-xgot" }
 686     run_dump_test_arches "li"           [mips_arch_list_matching mips1]
 687     if !$aout { run_dump_test "lifloat" }
 688     if $elf { run_dump_test "lif-svr4pic" }
 689     if $elf { run_dump_test "lif-xgot" }
 690     run_dump_test_arches "mips4"        [mips_arch_list_matching mips4]
 691     run_dump_test_arches "mips4-fp" "-32" \
 692                                         [mips_arch_list_matching fpisa4]
 693     run_dump_test_arches "mips4-fp" "-mabi=o64" \
 694                                         [mips_arch_list_matching fpisa4 gpr64]
 695     run_list_test_arches "mips4-fp" "-32 -msoft-float" \
 696                                         [mips_arch_list_matching fpisa4]
 697     run_dump_test_arches "mips4-branch-likely" \
 698                                         [mips_arch_list_matching mips4]
 699     run_list_test_arches "mips4-branch-likely" "-32 -msoft-float" \
 700                                         [mips_arch_list_matching mips4]
 701     run_dump_test_arches "mips5-fp" "-32" \
 702                                         [mips_arch_list_matching fpisa5]
 703     run_dump_test_arches "mips5-fp" "-mabi=o64" \
 704                                         [mips_arch_list_matching fpisa5 gpr64]
 705     run_dump_test "mul"
 706
 707     run_dump_test_arches "rol"          [mips_arch_list_matching mips1 !ror]
 708     run_dump_test_arches "rol-hw"       [mips_arch_list_matching ror]
 709
 710     run_dump_test_arches "rol64"        [mips_arch_list_matching gpr64 !ror]
 711     run_dump_test_arches "rol64-hw"     [mips_arch_list_matching gpr64 ror]
 712
 713     if !$aout { run_dump_test "sb" }
 714     run_dump_test "trunc"
 715     if !$aout { run_dump_test "ulh" }
 716     run_dump_test_arches "ulh2-eb"      [mips_arch_list_matching mips1]
 717     run_dump_test_arches "ulh2-el"      [mips_arch_list_matching mips1]
 718     if $elf { run_dump_test "ulh-svr4pic" }
 719     if $elf { run_dump_test "ulh-xgot" }
 720     if !$aout {
 721         run_dump_test "ulw"
 722         run_dump_test "uld"
 723         run_dump_test "ush"
 724         run_dump_test "usw"
 725         run_dump_test "usd"
 726     }
 727     run_dump_test_arches "ulw2-eb" \
 728                                 [mips_arch_list_matching mips1 !gpr_ilocks]
 729     run_dump_test_arches "ulw2-eb-ilocks" [mips_arch_list_matching gpr_ilocks]
 730     run_dump_test_arches "ulw2-el" \
 731                                 [mips_arch_list_matching mips1 !gpr_ilocks]
 732     run_dump_test_arches "ulw2-el-ilocks" [mips_arch_list_matching gpr_ilocks]
 733
 734     run_dump_test_arches "uld2-eb" [mips_arch_list_matching mips3]
 735     run_dump_test_arches "uld2-el" [mips_arch_list_matching mips3]
 736
 737     # The mips16 test can only be run on ELF, because only ELF
 738     # supports the necessary mips16 reloc.
 739     if { $elf && !$no_mips16 } {
 740         run_dump_test "mips16"
 741         run_dump_test "mips16-64"
 742         # Check MIPS16e extensions
 743         run_dump_test_arches "mips16e" \
 744                                 [mips_arch_list_matching mips32 !micromips]
 745         # Check jalx handling
 746         run_dump_test "mips16-jalx"
 747         run_dump_test "mips-jalx"
 748         run_dump_test "mips-jalx-2"
 749         # Check MIPS16 HI16/LO16 relocations
 750         run_dump_test "mips16-hilo"
 751         if $has_newabi {
 752             run_dump_test "mips16-hilo-n32"
 753         }
 754         run_dump_test "mips16-hilo-match"
 755     }
 756     run_dump_test "delay"
 757     run_dump_test "nodelay"
 758     run_dump_test "mips4010"
 759     run_dump_test "mips4650"
 760     run_dump_test "mips4100"
 761     run_dump_test "vr4111"
 762     run_dump_test "vr4120"
 763     run_dump_test "vr4120-2"
 764     run_dump_test "vr4130"
 765     run_dump_test "vr5400"
 766     run_dump_test "vr5500"
 767     run_dump_test "rm7000"
 768     run_dump_test "perfcount"
 769     run_dump_test "lineno"
 770     run_dump_test "sync"
 771
 772     run_dump_test_arches "mips32"       [mips_arch_list_matching mips32]
 773     run_dump_test_arches "mips32-imm"   [mips_arch_list_matching mips32]
 774
 775     run_dump_test_arches "mips32-sf32"  [mips_arch_list_matching mips32]
 776     run_list_test_arches "mips32-sf32" "-32 -msoft-float" \
 777                                         [mips_arch_list_matching mips32]
 778     run_dump_test_arches "mips32-cp2"   [mips_arch_list_matching mips32 \
 779                                             !octeon]
 780
 781     run_dump_test_arches "mips32r2"     [mips_arch_list_matching mips32r2]
 782     run_dump_test_arches "mips32r2-cp2" [mips_arch_list_matching mips32r2 \
 783                                             !octeon]
 784     run_dump_test_arches "mips32r2-fp32" \
 785                                         [mips_arch_list_matching mips32r2]
 786     run_list_test_arches "mips32r2-fp32" "-32 -msoft-float" \
 787                                         [mips_arch_list_matching mips32r2]
 788     run_list_test_arches "mips32r2-ill" "-32" \
 789                         [mips_arch_list_matching mips32r2 gpr32]
 790     run_list_test_arches "mips32r2-ill-fp64" "-mabi=o64" \
 791                         [mips_arch_list_matching mips32r2 gpr64]
 792     run_list_test_arches "mips32r2-ill-nofp" "-32 -msoft-float" \
 793                         [mips_arch_list_matching mips32r2]
 794
 795     run_dump_test_arches "mips64"       [mips_arch_list_matching mips64]
 796     run_dump_test_arches "mips64-cp2"   [mips_arch_list_matching mips64 \
 797                                             !octeon]
 798
 799     run_dump_test_arches "mips64r2"     [mips_arch_list_matching mips64r2]
 800     run_list_test_arches "mips64r2-ill" [mips_arch_list_matching mips64r2]
 801
 802     run_dump_test "set-arch"
 803
 804     if { !$addr32 } {
 805         run_dump_test "mips64-mips3d"
 806         run_dump_test_arches "mips64-mips3d-incl" [mips_arch_list_matching mips3d]
 807
 808         run_dump_test "mips64-mdmx"
 809         run_dump_test "sb1-ext-mdmx"
 810         run_dump_test "sb1-ext-ps"
 811         run_dump_test "xlr-ext"
 812     }
 813
 814     run_dump_test_arches "relax"        [mips_arch_list_matching mips2]
 815     run_dump_test_arches "relax-at"     [mips_arch_list_matching mips2]
 816     run_dump_test "relax-swap1-mips1"
 817     run_dump_test "relax-swap1-mips2"
 818     run_dump_test "relax-swap2"
 819     run_dump_test_arches "relax-swap3"  [mips_arch_list_all]
 820     run_list_test_arches "relax-bposge" "-mdsp -relax-branch" \
 821                                         [mips_arch_list_matching mips64r2 \
 822                                             !micromips]
 823
 824     run_list_test "illegal" "-32"
 825     run_list_test "baddata1" "-32"
 826     run_list_test "jalr" ""
 827
 828     # LOSE: As of 2002-02-08, the next 4 tests fail for target mips-ecoff.
 829     # It's unknown whether they _should_ pass as-is, or whether different
 830     # variants are needed for ELF and ECOFF.
 831     run_dump_test "mips-gp32-fp32"
 832     run_dump_test "mips-gp32-fp64"
 833     run_dump_test "mips-gp64-fp32"
 834     run_dump_test "mips-gp64-fp64"
 835
 836     if $elf {
 837         # Make sure that -mcpu=FOO and -mFOO are equivalent.  Assemble a file
 838         # containing 4650-specific instructions with -m4650 and -mcpu=4650,
 839         # and verify that they're the same.  Specifically, we're checking
 840         # that the EF_MIPS_MACH field is set, and that the 4650 'mul'
 841         # instruction does get used.  In previous versions of GAS,
 842         # only -mcpu=4650 would set the EF_MIPS_MACH field; -m4650 wouldn't.
 843         run_dump_test "elf_e_flags1"
 844         run_dump_test "elf_e_flags2"
 845         run_dump_test "elf_e_flags3"
 846         run_dump_test "elf_e_flags4"
 847
 848         # Check EF_MIPS_ARCH markings for each supported architecture.
 849         run_dump_test "elf_arch_mips1"
 850         run_dump_test "elf_arch_mips2"
 851         run_dump_test "elf_arch_mips3"
 852         run_dump_test "elf_arch_mips4"
 853         run_dump_test "elf_arch_mips5"
 854         run_dump_test "elf_arch_mips32"
 855         run_dump_test "elf_arch_mips32r2"
 856         run_dump_test "elf_arch_mips64"
 857         run_dump_test "elf_arch_mips64r2"
 858
 859         # Verify that ASE markings are handled properly.
 860         if { !$no_mips16 } {
 861             run_dump_test "elf_ase_mips16"
 862             run_dump_test "elf_ase_mips16-2"
 863         }
 864         if { !$no_micromips } {
 865             run_dump_test "elf_ase_micromips"
 866             run_dump_test "elf_ase_micromips-2"
 867         }
 868
 869         run_dump_test "mips-gp32-fp32-pic"
 870         run_dump_test "mips-gp32-fp64-pic"
 871         run_dump_test "mips-gp64-fp32-pic"
 872         run_dump_test "mips-gp64-fp64-pic"
 873
 874         run_dump_test "mips-abi32"
 875         run_dump_test "mips-abi32-pic"
 876         run_dump_test "mips-abi32-pic2"
 877
 878         run_dump_test "elf${el}-rel"
 879         run_dump_test_arches "elf${el}-rel2" [mips_arch_list_matching gpr64]
 880         run_dump_test "e32${el}-rel2"
 881         run_dump_test "elf${el}-rel3"
 882         run_dump_test_arches "elf-rel4" [mips_arch_list_matching gpr64]
 883         run_dump_test "e32-rel4"
 884         run_dump_test "elf-rel5"
 885         run_dump_test "elf-rel6"
 886         if $has_newabi {
 887             run_dump_test "elf-rel6-n32"
 888             run_dump_test "elf-rel6-n64"
 889         }
 890         run_dump_test "elf-rel7"
 891         run_dump_test "elf-rel8"
 892         run_dump_test "elf-rel8-mips16"
 893         run_dump_test "elf-rel9"
 894         run_dump_test "elf-rel9-mips16"
 895         if $has_newabi {
 896             run_dump_test "elf-rel10"
 897             run_dump_test "elf-rel11"
 898         }
 899         run_dump_test "elf-rel12"
 900         run_dump_test "elf-rel13"
 901         run_dump_test "elf-rel13-mips16"
 902         run_dump_test "elf-rel14"
 903
 904         if $has_newabi {
 905             run_dump_test "elf-rel15"
 906             run_dump_test "elf-rel16"
 907
 908             run_dump_test "elf-rel-got-n32"
 909             run_dump_test "elf-rel-xgot-n32"
 910             run_dump_test "elf-rel-got-n64"
 911             run_dump_test "elf-rel-xgot-n64"
 912         }
 913         run_dump_test "elf-rel17"
 914         if $has_newabi {
 915             run_dump_test "elf-rel18"
 916         }
 917         run_dump_test "elf-rel19"
 918         run_dump_test "elf-rel20"
 919         if $has_newabi {
 920             run_dump_test "elf-rel21"
 921             run_dump_test "elf-rel22"
 922             run_dump_test "elf-rel23"
 923             run_dump_test "elf-rel23a"
 924             run_dump_test "elf-rel23b"
 925             run_dump_test "elf-rel24"
 926         }
 927
 928         run_dump_test "elf-rel25"
 929         run_dump_test "elf-rel25a"
 930         run_dump_test "elf-rel26"
 931
 932         run_dump_test_arches "elf-rel27" [mips_arch_list_all]
 933
 934         if $has_newabi {
 935             run_dump_test "elf-rel28-n32"
 936             run_dump_test "elf-rel28-n64"
 937             run_dump_test_arches "elf-rel29" [mips_arch_list_matching mips3]
 938         }
 939         run_list_test_arches "elf-rel30" "-32" [mips_arch_list_all]
 940
 941         if { !$no_mips16 } {
 942             run_dump_test "${tmips}mips${el}16-e"
 943             run_dump_test "${tmips}mips${el}16-f"
 944         }
 945         run_dump_test "elf-consthilo"
 946         run_dump_test "expr1"
 947
 948         run_list_test "tls-ill" "-32"
 949         run_dump_test "tls-o32"
 950         run_dump_test "tls-relw"
 951         run_dump_test "jalr2"
 952
 953         run_dump_test_arches "aent"     [mips_arch_list_matching mips1]
 954
 955         run_dump_test_arches "branch-misc-4" \
 956                                         [mips_arch_list_matching mips1]
 957         run_dump_test_arches "branch-misc-4-64" \
 958                                         [mips_arch_list_matching mips3]
 959
 960         run_dump_test_arches "loc-swap" [mips_arch_list_all]
 961         run_dump_test_arches "loc-swap-dis" \
 962                                         [mips_arch_list_all]
 963         run_dump_test_arches "loc-swap-2" [mips_arch_list_all]
 964     }
 965
 966     if $has_newabi {
 967         run_dump_test "n32-consec"
 968     }
 969
 970     # tests of objdump's ability to disassemble using different
 971     # register names.
 972     run_dump_test "gpr-names-numeric"
 973     run_dump_test "gpr-names-32"
 974     run_dump_test "gpr-names-n32"
 975     run_dump_test "gpr-names-64"
 976
 977     run_dump_test "fpr-names-numeric"
 978     run_dump_test "fpr-names-32"
 979     run_dump_test "fpr-names-n32"
 980     run_dump_test "fpr-names-64"
 981
 982     run_dump_test "cp0-names-numeric"
 983     run_dump_test "cp0-names-r3000"
 984     run_dump_test "cp0-names-r4000" \
 985                   { { {name} {(r4000)} } { {objdump} {-M cp0-names=r4000} } }
 986     run_dump_test "cp0-names-r4000" \
 987                   { { {name} {(r4400)} } { {objdump} {-M cp0-names=r4400} } }
 988     run_dump_test "cp0-names-mips32"
 989     run_dump_test "cp0-names-mips32r2"
 990     run_dump_test "cp0-names-mips64"
 991     run_dump_test "cp0-names-mips64r2"
 992     run_dump_test "cp0-names-sb1"
 993
 994     run_dump_test "cp0sel-names-numeric"
 995     run_dump_test "cp0sel-names-mips32"
 996     run_dump_test "cp0sel-names-mips32r2"
 997     run_dump_test "cp0sel-names-mips64"
 998     run_dump_test "cp0sel-names-mips64r2"
 999     run_dump_test "cp0sel-names-sb1"
1000
1001     run_dump_test "hwr-names-numeric"
1002     run_dump_test "hwr-names-mips32r2"
1003     run_dump_test "hwr-names-mips64r2"
1004
1005     run_dump_test "ldstla-32"
1006     run_dump_test "ldstla-32-mips3"
1007     run_dump_test "ldstla-32-shared"
1008     run_dump_test "ldstla-32-mips3-shared"
1009     run_list_test "ldstla-32-1" "-mabi=32" \
1010         "MIPS ld-st-la bad constants (ABI o32)"
1011     run_list_test "ldstla-32-mips3-1" "-mabi=32" \
1012         "MIPS ld-st-la bad constants (ABI o32, mips3)"
1013     run_list_test "ldstla-32-1" "-KPIC -mabi=32" \
1014         "MIPS ld-st-la bad constants (ABI o32, shared)"
1015     run_list_test "ldstla-32-mips3-1" "-KPIC -mabi=32" \
1016         "MIPS ld-st-la bad constants (ABI o32, mips3, shared)"
1017     run_dump_test "ldstla-eabi64"
1018     if $has_newabi {
1019         run_dump_test "ldstla-n64"
1020         run_dump_test "ldstla-n64-shared"
1021         run_dump_test "ldstla-n64-sym32"
1022     }
1023
1024     run_dump_test "macro-warn-1"
1025     run_dump_test "macro-warn-2"
1026     run_dump_test "macro-warn-3"
1027     run_dump_test "macro-warn-4"
1028     if $has_newabi {
1029         run_dump_test "macro-warn-1-n32"
1030         run_dump_test "macro-warn-2-n32"
1031     }
1032
1033     run_dump_test "noat-1"
1034     run_list_test "noat-2" ""
1035     run_list_test "noat-3" ""
1036     run_list_test "noat-4" ""
1037     run_list_test "noat-5" ""
1038     run_list_test "noat-6" ""
1039     run_list_test "noat-7" ""
1040
1041     run_dump_test "at-1"
1042     run_list_test "at-2" "-32 -mips1" "MIPS at-2"
1043
1044     run_dump_test "loongson-2e"
1045     run_dump_test "loongson-2f"
1046     run_dump_test "loongson-2f-2"
1047     run_dump_test "loongson-2f-3"
1048
1049     run_dump_test "loongson-3a"
1050     run_dump_test "loongson-3a-2"
1051     run_dump_test "loongson-3a-3"
1052
1053     run_dump_test_arches "octeon"       [mips_arch_list_matching octeon]
1054     run_dump_test_arches "octeon-saa-saad" [mips_arch_list_matching octeonp]
1055     run_list_test_arches "octeon-ill"   [mips_arch_list_matching octeon]
1056     run_dump_test_arches "octeon-pref"  [mips_arch_list_matching octeon]
1057     run_dump_test_arches "octeon2"      [mips_arch_list_matching octeon2]
1058
1059     run_dump_test "smartmips"
1060     run_dump_test_arches "mips32-dsp"   [mips_arch_list_matching mips32r2 \
1061                                             !octeon]
1062     run_dump_test_arches "mips32-dspr2" [mips_arch_list_matching mips32r2 \
1063                                             !octeon]
1064     run_dump_test "mips64-dsp"
1065     run_dump_test "mips32-mt"
1066
1067     if { $elf && !$no_mips16 } {
1068         run_dump_test "mips16-dwarf2"
1069         if $has_newabi {
1070             run_dump_test "mips16-dwarf2-n32"
1071         }
1072     }
1073     if { !$no_mips16 } {
1074         run_dump_test "mips16e-jrc"
1075         run_dump_test "mips16e-save"
1076         run_dump_test "mips16e-64"
1077         run_list_test "mips16e-64" "-march=mips32 -32"
1078         run_dump_test "mips16-intermix"
1079     }
1080     run_dump_test "vxworks1"
1081     run_dump_test "vxworks1-xgot"
1082     run_dump_test "vxworks1-el"
1083     run_dump_test "vxworks1-xgot-el"
1084
1085     run_dump_test "noreorder"
1086     run_dump_test "align"
1087     run_dump_test "align2"
1088     run_dump_test "align2-el"
1089     run_dump_test "align3"
1090     run_dump_test "odd-float"
1091
1092     run_list_test_arches "mips-macro-ill-sfp" "-32 -msingle-float" \
1093                                         [mips_arch_list_matching mips2]
1094     run_list_test_arches "mips-macro-ill-nofp" "-32 -msoft-float" \
1095                                         [mips_arch_list_matching mips2]
1096
1097     run_list_test_arches "mips-hard-float-flag" \
1098         "-32 -msoft-float -mhard-float" \
1099                                         [mips_arch_list_matching mips1]
1100     run_list_test_arches "mips-double-float-flag" \
1101         "-32 -msingle-float -mdouble-float" \
1102                                         [mips_arch_list_matching mips1]
1103
1104     run_dump_test "mips16-vis-1"
1105     run_dump_test "call-nonpic-1"
1106     run_dump_test "mips32-sync"
1107     run_dump_test_arches "mips32r2-sync" \
1108                                         [mips_arch_list_matching mips32r2]
1109     run_dump_test_arches "alnv_ps-swap" [mips_arch_list_matching fpisa5]
1110     run_dump_test_arches "cache" [lsort -dictionary -unique [concat \
1111                                         [mips_arch_list_matching mips3] \
1112                                         [mips_arch_list_matching mips32] ] ]
1113     run_dump_test_arches "daddi"        [mips_arch_list_matching mips3]
1114     run_dump_test_arches "pref" [lsort -dictionary -unique [concat \
1115                                         [mips_arch_list_matching mips4] \
1116                                         [mips_arch_list_matching mips32] ] ]
1117
1118     if $has_newabi { run_dump_test "cfi-n64-1" }
1119
1120     run_dump_test "pr12915"
1121     run_dump_test "reginfo-1a"
1122     run_dump_test "reginfo-1b"
1123
1124     if { !$no_micromips } {
1125         run_dump_test "micromips"
1126         run_dump_test "micromips-trap"
1127         run_list_test "micromips-size-0" \
1128             "-32 -march=mips64 -mmicromips" "microMIPS instruction size 0"
1129         run_dump_test "micromips-size-1"
1130         run_dump_test "micromips-branch-relax"
1131         run_dump_test "micromips-branch-relax-pic"
1132         run_dump_test "micromips-branch-delay"
1133         run_dump_test "micromips-warn-branch-delay"
1134         run_dump_test "micromips-warn-branch-delay-1"
1135         run_dump_test "micromips-b16"
1136     }
1137
1138     run_dump_test_arches "mcu"          [mips_arch_list_matching mips32r2 \
1139                                             !octeon]
1140     run_dump_test_arches "hilo-diff-eb" [mips_arch_list_all]
1141     run_dump_test_arches "hilo-diff-el" [mips_arch_list_all]
1142     if $has_newabi {
1143         run_dump_test_arches "hilo-diff-eb-n32" [mips_arch_list_matching mips3]
1144         run_dump_test_arches "hilo-diff-el-n32" [mips_arch_list_matching mips3]
1145         run_dump_test_arches "hilo-diff-eb-n64" [mips_arch_list_matching mips3]
1146         run_dump_test_arches "hilo-diff-el-n64" [mips_arch_list_matching mips3]
1147     }
1148     run_dump_test_arches "lui"          [mips_arch_list_matching mips1]
1149     run_list_test_arches "lui-1" "-32"  [mips_arch_list_matching mips1]
1150     run_list_test_arches "lui-2" "-32"  [mips_arch_list_matching mips1]
1151 }