gas/testsuite/gas/mips/mips.exp

   1 # Copyright 2012, 2013
   2 # Free Software Foundation, Inc.
   3
   4 # This program is free software; you can redistribute it and/or modify
   5 # it under the terms of the GNU General Public License as published by
   6 # the Free Software Foundation; either version 3 of the License, or
   7 # (at your option) any later version.
   8 #
   9 # This program is distributed in the hope that it will be useful,
  10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12 # GNU General Public License for more details.
  13 #
  14 # You should have received a copy of the GNU General Public License
  15 # along with this program; if not, write to the Free Software
  16 # Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.
  17
  18 #
  19 # Some generic MIPS tests
  20 #
  21
  22 # When adding a new test to this file, try to do the following things:
  23 #
  24 # * If testing assembly and disassembly of code, don't forget to test
  25 # the actual bit encodings of the instructions (using the
  26 # --show-raw-insn flag to objdump).
  27 #
  28 # * Try to run the test for as many architectures as appropriate,
  29 # using the "run_dump_test_arches" or "run_list_test_arches" functions,
  30 # along with the output from a call to "mips_arch_list_matching."
  31 #
  32 # * Be sure to compare the test output before and after your testsuite
  33 # changes, to verify that existing and new tests were run as expected.
  34 # Look for expect ERROR messages in the testsuite .log file to make sure
  35 # the new expect code did not contain errors.
  36
  37 # To add support for a new CPU to this file, add an appropriate entry
  38 # to the sequence of "mips_arch_create" function calls below, and test
  39 # the result.  The new CPU should automatically be used when running
  40 # various tests.  If the new CPU is the default CPU for any tool
  41 # targets, make sure the call to "mips_arch_create" reflects that fact.
  42
  43
  44 # The functions below create and manipulate an "architecture data
  45 # array" which contains entries for each MIPS architecture (or CPU)
  46 # known to these tests.  The array contains the following information
  47 # for each architecture, indexed by the name of the architecture
  48 # described by the entry:
  49 #
  50 # displayname: The name of the entry to be used for pretty-printing.
  51 #
  52 # gprsize: The size in bits of General Purpose Registers provided by
  53 # the architecture (must be 32 or 64).
  54 #
  55 # props: A list of text strings which are associated with the
  56 # architecture.  These include the architecture name as well as
  57 # information about what instructions the CPU supports.  When matching
  58 # based on properties, an additional property is added to the normal
  59 # property list, "gpr<gprsize>" so that tests can match CPUs which
  60 # have GPRs of a specific size.  The following properties are most
  61 # useful when matching properties for generic (i.e., not CPU-specific)
  62 # tests:
  63 #
  64 #       mips1, mips2, mips3, mips4, mips5, mips32, mips64
  65 #               The architecture includes the instructions defined
  66 #               by that MIPS ISA.
  67 #
  68 #       fpisa3, fpisa4, fpisa5
  69 #               The architecture includes the floating-point
  70 #               instructions defined by that MIPS ISA.
  71 #
  72 #       gpr_ilocks
  73 #               The architecture interlocks GPRs accesses.  (That is,
  74 #               there are no load delay slots.)
  75 #
  76 #       mips3d  The architecture includes the MIPS-3D ASE.
  77 #
  78 #       ror     The architecture includes hardware rotate instructions.
  79 #
  80 #       gpr32, gpr64
  81 #               The architecture provides 32- or 64-bit General Purpose
  82 #               Registers.
  83 #
  84 #       singlefloat
  85 #               The CPU is 64 bit, but only supports 32 bit FPU.
  86 #
  87 #       nollsc
  88 #               The CPU doesn't support ll, sc, lld and scd instructions.
  89 #
  90 # as_flags: The assembler flags used when assembling tests for this
  91 # architecture.
  92 #
  93 # objdump_flags: The objdump flags used when disassembling tests for
  94 # this architecture.
  95 #
  96 # Most entries in the architecture array will have values in all of
  97 # the fields above.  One entry, "default" represents the default CPU
  98 # based on the target of the assembler being built.  If always has
  99 # empty "as_flags" and "objdump_flags."
 100
 101 # mips_arch_init
 102 #
 103 # This function initializes the architecture data array ("mips_arches")
 104 # to be empty.
 105 proc mips_arch_init {} {
 106     global mips_arches
 107
 108     # Catch because the variable won't be set the first time through.
 109     catch {unset mips_arches}
 110 }
 111
 112 # mips_arch_create ARCH GPRSIZE EXTENDS PROPS AS_FLAGS OBJDUMP_FLAGS \
 113 #                  (optional:) DEFAULT_FOR_TARGETS
 114 #
 115 # This function creates a new entry in the architecture data array,
 116 # for the architecture or CPU named ARCH, and fills in the entry
 117 # according to the rest of the arguments.
 118 #
 119 # The new entry's property list is initialized to contain ARCH, any
 120 # properties specified by PROPS, and the properties associated with
 121 # the entry specified by EXTENDS.  (The new architecture is considered
 122 # to extend the capabilities provided by that architecture.)
 123 #
 124 # If DEFAULT_FOR_TARGETS is specified, it is a list of targets for which
 125 # this architecture is the default architecture.  If "istarget" returns
 126 # true for any of the targets in the list, a "default" entry will be
 127 # added to the architecture array which indicates that ARCH is the default
 128 # architecture.
 129 proc mips_arch_create {arch gprsize extends props as_flags objdump_flags
 130                        {default_for_targets {}}} {
 131     global mips_arches
 132
 133     if { [info exists mips_arches($arch)] } {
 134              error "mips_arch_create: arch \"$arch\" already exists"
 135     }
 136     if { $gprsize != 32 && $gprsize != 64 } {
 137         error "mips_arch_create: invalid GPR size $gprsize"
 138     }
 139
 140     set archdata(displayname) $arch
 141     set archdata(gprsize) $gprsize
 142     set archdata(as_flags) $as_flags
 143     set archdata(objdump_flags) $objdump_flags
 144     set archdata(props) $arch
 145     eval lappend archdata(props) $props
 146     if { [string length $extends] != 0 } {
 147         eval lappend archdata(props) [mips_arch_properties $extends 0]
 148     }
 149
 150     set mips_arches($arch) [array get archdata]
 151
 152     # Set as default if appropriate.
 153     foreach target $default_for_targets {
 154         if { [istarget $target] } {
 155             if { [info exists mips_arches(default)] } {
 156                 error "mips_arch_create: default arch already exists"
 157             }
 158
 159             set archdata(displayname) "default = $arch"
 160             set archdata(as_flags) ""
 161             set archdata(objdump_flags) ""
 162
 163             set mips_arches(default) [array get archdata]
 164             break
 165         }
 166     }
 167 }
 168
 169 # mips_arch_destroy ARCH
 170 #
 171 # The opposite of the above.  This function removes an entry from
 172 # the architecture data array, for the architecture or CPU named ARCH.
 173
 174 proc mips_arch_destroy {arch} {
 175     global mips_arches
 176
 177     if { [info exists mips_arches($arch)] } {
 178         unset mips_arches($arch)
 179     }
 180 }
 181
 182 # mips_arch_list_all
 183 #
 184 # This function returns the list of all names of entries in the
 185 # architecture data array (including the default entry, if a default
 186 # is known).
 187 proc mips_arch_list_all {} {
 188     global mips_arches
 189     return [lsort -dictionary [array names mips_arches]]
 190 }
 191
 192 # mips_arch_data ARCH
 193 #
 194 # This function returns the information associated with ARCH
 195 # in the architecture data array, in "array get" form.
 196 proc mips_arch_data {arch} {
 197     global mips_arches
 198
 199     if { ! [info exists mips_arches($arch)] } {
 200         error "mips_arch_data: unknown arch \"$arch\""
 201     }
 202     return $mips_arches($arch)
 203 }
 204
 205 # mips_arch_displayname ARCH
 206 #
 207 # This function returns the printable name associated with ARCH in
 208 # the architecture data array.
 209 proc mips_arch_displayname {arch} {
 210     array set archdata [mips_arch_data $arch]
 211     return $archdata(displayname)
 212 }
 213
 214 # mips_arch_properties ARCH (optional:) INCLUDE_GPRSIZE
 215 #
 216 # This function returns the property list associated with ARCH in the
 217 # architecture data array, including the "canonical" target name as the
 218 # first element.
 219 #
 220 # If INCLUDE_GPRSIZE is non-zero, an additional "gpr32" or "gpr64"
 221 # property will be returned as part of the list based on the
 222 # architecture's GPR size.
 223 proc mips_arch_properties {arch {include_gprsize 1}} {
 224     array set archdata [mips_arch_data $arch]
 225     set props $archdata(props)
 226     if { $include_gprsize } {
 227         lappend props gpr$archdata(gprsize)
 228     }
 229     return $props
 230 }
 231
 232 # mips_arch_as_flags ARCH
 233 #
 234 # This function returns the assembler flags associated with ARCH in
 235 # the architecture data array.
 236 proc mips_arch_as_flags {arch} {
 237     array set archdata [mips_arch_data $arch]
 238     return $archdata(as_flags)
 239 }
 240
 241 # mips_arch_objdump_flags ARCH
 242 #
 243 # This function returns the objdump disassembly flags associated with
 244 # ARCH in the architecture data array.
 245 proc mips_arch_objdump_flags {arch} {
 246     array set archdata [mips_arch_data $arch]
 247     return $archdata(objdump_flags)
 248 }
 249
 250 # mips_arch_matches ARCH PROPMATCHLIST
 251 #
 252 # This function returns non-zero if ARCH matches the set of properties
 253 # described by PROPMATCHLIST.  Each entry in PROPMATCHLIST can either
 254 # be the name of a property which must be matched, or "!" followed by
 255 # the name of a property which must not be matched.  ARCH matches
 256 # PROPMATCHLIST if and only if all of the conditions specified by
 257 # PROPMATCHLIST are satisfied.
 258 proc mips_arch_matches {arch propmatchlist} {
 259     foreach pm $propmatchlist {
 260         if { [string match {!*} $pm] } {
 261             # fail if present.
 262             set inverted 1
 263             set p [string range $pm 1 end]
 264         } {
 265             # fail if not present.
 266             set inverted 0
 267             set p $pm
 268         }
 269
 270         set loc [lsearch -exact [mips_arch_properties $arch] $p]
 271
 272         # required-absent and found, or required-present and not found: fail.
 273         if { ($inverted && $loc != -1) || (! $inverted && $loc == -1) } {
 274             return 0
 275         }
 276     }
 277     return 1
 278 }
 279
 280 # mips_arch_list_matching ARGS
 281 #
 282 # This function returns a list of all architectures which match
 283 # the conditions described by its arguments.  Its arguments are
 284 # taken as a list and used as the PROPMATCHLIST in a call to
 285 # "mips_arch_matches" for each known architecture.
 286 proc mips_arch_list_matching {args} {
 287     set l ""
 288     foreach arch [mips_arch_list_all] {
 289         # For now, don't match default arch until we know what its
 290         # properties actually are.
 291         if { [string compare $arch default] == 0
 292              && [string length [mips_arch_properties default]] == 0} {
 293             continue
 294         }
 295         if { [mips_arch_matches $arch $args] } {
 296             lappend l $arch
 297         }
 298     }
 299     return $l
 300 }
 301
 302
 303 # The functions below facilitate running various types of tests.
 304
 305 # run_dump_test_arch NAME OPTS ARCH
 306 #
 307 # Invoke "run_dump_test" for test NAME with additional assembler options OPTS.
 308 # Add the assembler and disassembler flags that are associated with
 309 # architecture ARCH.
 310 #
 311 # You can override the expected output for particular architectures.
 312 # The possible test names are, in order of preference:
 313 #
 314 # 1. CARCH@NAME.d
 315 # 2. NAME.d
 316 #
 317 # where CARCH is the "canonical" name of architecture ARCH as recorded
 318 # in its associated property list.
 319 proc run_dump_test_arch { name opts arch } {
 320     global subdir srcdir
 321
 322     set proparch [lindex [mips_arch_properties $arch 0] 0]
 323     set prefixes [list ${proparch}@ ]
 324     if { [ string match "octeon*" $proparch ] && $proparch != "octeon" } {
 325         lappend prefixes octeon@
 326     }
 327     foreach prefix ${prefixes} {
 328         set archname ${prefix}${name}
 329         if { [file exists "$srcdir/$subdir/${archname}.d"] } {
 330             set name $archname
 331             break
 332         }
 333     }
 334
 335     if [catch {run_dump_test $name \
 336                    "{name    {([concat $opts [mips_arch_displayname $arch]])}}
 337                     {objdump {[mips_arch_objdump_flags $arch]}}
 338                     {as      {[concat $opts [mips_arch_as_flags $arch]]}}"} rv] {
 339         perror "$rv"
 340         untested "$subdir/$name ($arch)"
 341     }
 342 }
 343
 344 # run_dump_test_arches NAME [OPTS] ARCH_LIST
 345 #
 346 # Invoke "run_dump_test_arch" for test NAME, for each architecture
 347 # listed in ARCH_LIST.  OPTS, if specified, is a list of additional
 348 # assembler options that should be used for all architectures.
 349 proc run_dump_test_arches { name args } {
 350     set opts ""
 351     if { [llength $args] > 1 } {
 352         set opts [lindex $args 0]
 353         set args [lrange $args 1 end]
 354     }
 355     set arch_list [lindex $args 0]
 356     foreach arch $arch_list {
 357         run_dump_test_arch $name $opts $arch
 358     }
 359 }
 360
 361 # run_list_test_arch NAME OPTS ARCH
 362 #
 363 # Invoke "run_list_test" for test NAME with additional assembler options OPTS.
 364 # Add the assembler flags that are associated with architecture ARCH.
 365 proc run_list_test_arch { name opts arch } {
 366     global subdir
 367
 368     set testname "MIPS $name ([concat $opts [mips_arch_displayname $arch]])"
 369     if [catch {run_list_test \
 370                    $name \
 371                    [concat $opts [mips_arch_as_flags $arch]] \
 372                    $testname} rv] {
 373         perror "$rv"
 374         untested "$testname"
 375     }
 376 }
 377
 378 # run_list_test_arches NAME [OPTS] ARCH_LIST
 379 #
 380 # Invoke "run_list_test_arch" for test NAME, for each architecture listed
 381 # in ARCH_LIST.  OPTS, if specified, is a list of additional assembler
 382 # options that should be used for all architectures.
 383 proc run_list_test_arches { name args } {
 384     set opts ""
 385     if { [llength $args] > 1 } {
 386         set opts [lindex $args 0]
 387         set args [lrange $args 1 end]
 388     }
 389     set arch_list [lindex $args 0]
 390     foreach arch $arch_list {
 391         run_list_test_arch "$name" "$opts" "$arch"
 392     }
 393 }
 394
 395
 396 # Create the architecture data array by providing data for all
 397 # known architectures.
 398 #
 399 # Note that several targets pick default CPU based on ABI.  We
 400 # can't easily handle that; do NOT list those targets as defaulting
 401 # to any architecture.
 402 mips_arch_init
 403 mips_arch_create mips1  32      {}      {} \
 404                         { -march=mips1 -mtune=mips1 } { -mmips:3000 }
 405 mips_arch_create mips2  32      mips1   { gpr_ilocks } \
 406                         { -march=mips2 -mtune=mips2 } { -mmips:6000 }
 407 mips_arch_create mips3  64      mips2   { fpisa3 } \
 408                         { -march=mips3 -mtune=mips3 } { -mmips:4000 }
 409 mips_arch_create mips4  64      mips3   { fpisa4 } \
 410                         { -march=mips4 -mtune=mips4 } { -mmips:8000 }
 411 mips_arch_create mips5  64      mips4   { fpisa5 } \
 412                         { -march=mips5 -mtune=mips5 } { -mmips:mips5 }
 413 mips_arch_create mips32 32      mips2   {} \
 414                         { -march=mips32 -mtune=mips32 } { -mmips:isa32 } \
 415                         { mipsisa32-*-* mipsisa32el-*-* }
 416 mips_arch_create mips32r2 32    mips32  { fpisa3 fpisa4 fpisa5 ror } \
 417                         { -march=mips32r2 -mtune=mips32r2 } \
 418                         { -mmips:isa32r2 } \
 419                         { mipsisa32r2-*-* mipsisa32r2el-*-* }
 420 mips_arch_create mips64 64      mips5   { mips32 } \
 421                         { -march=mips64 -mtune=mips64 } { -mmips:isa64 } \
 422                         { mipsisa64-*-* mipsisa64el-*-* }
 423 mips_arch_create mips64r2 64    mips64  { mips32r2 ror } \
 424                         { -march=mips64r2 -mtune=mips64r2 } \
 425                         { -mmips:isa64r2 } \
 426                         { mipsisa64r2-*-* mipsisa64r2el-*-* }
 427 mips_arch_create mips16 32      {}      {} \
 428                         { -march=mips1 -mips16 } { -mmips:16 }
 429 mips_arch_create micromips 64   mips64r2 {} \
 430                         { -march=mips64 -mmicromips } {}
 431 mips_arch_create r3000  32      mips1   {} \
 432                         { -march=r3000 -mtune=r3000 } { -mmips:3000 }
 433 mips_arch_create r3900  32      mips1   { gpr_ilocks } \
 434                         { -march=r3900 -mtune=r3900 } { -mmips:3900 } \
 435                         { mipstx39-*-* mipstx39el-*-* }
 436 mips_arch_create r4000  64      mips3   {} \
 437                         { -march=r4000 -mtune=r4000 } { -mmips:4000 }
 438 mips_arch_create vr5400 64      mips4   { ror } \
 439                         { -march=vr5400 -mtune=vr5400 } { -mmips:5400 }
 440 mips_arch_create sb1    64      mips64  { mips3d } \
 441                         { -march=sb1 -mtune=sb1 } { -mmips:sb1 } \
 442                         { mipsisa64sb1-*-* mipsisa64sb1el-*-* }
 443 mips_arch_create octeon 64      mips64r2 {} \
 444                         { -march=octeon -mtune=octeon } { -mmips:octeon } \
 445                         { mips64octeon*-*-* }
 446 mips_arch_create octeonp 64     octeon {} \
 447                         { -march=octeon+ -mtune=octeon+ } { -mmips:octeon+ } \
 448                         { }
 449 mips_arch_create octeon2 64     octeonp {} \
 450                         { -march=octeon2 -mtune=octeon2 } { -mmips:octeon2 } \
 451                         { }
 452 mips_arch_create xlr    64      mips64  {} \
 453                         { -march=xlr -mtune=xlr } { -mmips:xlr }
 454 mips_arch_create r5900  64      mips3   { gpr_ilocks singlefloat nollsc } \
 455                         { -march=r5900 -mtune=r5900 } { -mmips:5900 } \
 456                         { mipsr5900el-*-* mips64r5900el-*-* }
 457
 458 #
 459 # And now begin the actual tests!  VxWorks uses RELA rather than REL
 460 # relocations, so most of the generic dump tests will not work there.
 461 #
 462 if { [istarget mips*-*-vxworks*] } {
 463     run_dump_test "vxworks1"
 464     run_dump_test "vxworks1-xgot"
 465     run_dump_test "vxworks1-el"
 466     run_dump_test "vxworks1-xgot-el"
 467 } elseif { [istarget mips*-*-*] } {
 468     set addr32 [expr [istarget mipstx39*-*-*] || [istarget mips-*-linux*] || [istarget mipsel-*-linux*]]
 469     set has_newabi [expr [istarget *-*-irix6*] || [istarget mips*-*-linux*] || [istarget mips*-sde-elf*]]
 470
 471     if { [istarget "mips*-*-*linux*"]
 472          || [istarget "mips*-sde-elf*"]
 473          || [istarget "mips*-*-*bsd*"] } then {
 474         set tmips "t"
 475     } else {
 476         set tmips ""
 477     }
 478     if [istarget mips*el-*-*] {
 479         set el "el"
 480     } {
 481         set el ""
 482     }
 483
 484     run_dump_test_arches "dot-1"        [mips_arch_list_matching mips1]
 485     run_dump_test_arches "abs"          [mips_arch_list_matching mips1]
 486     run_dump_test_arches "add"          [mips_arch_list_matching mips1]
 487     run_dump_test_arches "and"          [mips_arch_list_matching mips1]
 488     run_dump_test_arches "mips1-fp"     [mips_arch_list_matching mips1]
 489     run_list_test_arches "mips1-fp" "-32 -msoft-float" \
 490                                         [mips_arch_list_matching mips1]
 491     run_dump_test "break20"
 492     run_dump_test "trap20"
 493
 494     run_dump_test_arches "beq"          [mips_arch_list_matching mips1]
 495     run_dump_test_arches "bge"          [mips_arch_list_matching mips1]
 496     run_dump_test_arches "bgeu"         [mips_arch_list_matching mips1]
 497     run_dump_test_arches "blt"          [mips_arch_list_matching mips1]
 498     run_dump_test_arches "bltu"         [mips_arch_list_matching mips1]
 499     run_dump_test_arches "branch-likely" [mips_arch_list_matching mips2]
 500     run_dump_test_arches "branch-misc-1" [mips_arch_list_matching mips1]
 501     run_dump_test_arches "branch-misc-2" [mips_arch_list_matching mips1]
 502     run_dump_test_arches "branch-misc-2pic" [mips_arch_list_matching mips1]
 503     run_dump_test_arches "branch-misc-2-64" [mips_arch_list_matching mips3]
 504     run_dump_test_arches "branch-misc-2pic-64" [mips_arch_list_matching mips3]
 505     run_dump_test "branch-misc-3"
 506     run_dump_test "branch-swap"
 507
 508     # Sweep a range of branch offsets so that it hits a position where
 509     # it is at the beginning of a frag and then swapped with a 16-bit
 510     # instruction from the preceding frag.  The offset will be somewhere
 511     # close below 4096 as this is the default obstack size limit that
 512     # we use and some space will have been already consumed.  The exact
 513     # amount depends on the host's programming model.
 514     for { set count 960 } { $count <= 1024 } { incr count } {
 515         run_list_test "branch-swap-2" "--defsym count=$count" \
 516             "MIPS branch swapping ($count)"
 517     }
 518
 519     run_dump_test "div"
 520
 521     if { !$addr32 } {
 522         run_dump_test_arches "dli"      [mips_arch_list_matching mips3]
 523     }
 524     run_dump_test_arches "jal"          [mips_arch_list_matching mips1]
 525     run_dump_test_arches "jal-mask-11"  [mips_arch_list_matching mips1]
 526     run_dump_test_arches "jal-mask-12"  [mips_arch_list_matching mips1]
 527     run_dump_test_arches "jal-mask-21"  [mips_arch_list_matching micromips]
 528     run_dump_test_arches "jal-mask-22"  [mips_arch_list_matching micromips]
 529     run_dump_test "eret-1"
 530     run_dump_test "eret-2"
 531     run_dump_test "eret-3"
 532     run_dump_test_arches "24k-branch-delay-1" \
 533                                         [mips_arch_list_matching mips1]
 534     run_dump_test_arches "24k-triple-stores-1" \
 535                                 [mips_arch_list_matching fpisa5 !octeon]
 536     run_dump_test_arches "24k-triple-stores-2" \
 537                                         [mips_arch_list_matching mips2]
 538     run_dump_test_arches "24k-triple-stores-2-llsc" \
 539                                         [mips_arch_list_matching mips2 !nollsc]
 540     run_dump_test_arches "24k-triple-stores-3" \
 541                                         [mips_arch_list_matching mips2]
 542     run_dump_test_arches "24k-triple-stores-4" \
 543                                         [mips_arch_list_matching mips2 !singlefloat]
 544     run_dump_test_arches "24k-triple-stores-5" \
 545                                         [mips_arch_list_matching mips1]
 546     run_dump_test_arches "24k-triple-stores-6" \
 547                                         [mips_arch_list_matching mips2 !singlefloat]
 548     run_dump_test_arches "24k-triple-stores-7" \
 549                                         [mips_arch_list_matching mips2 !singlefloat]
 550     run_dump_test_arches "24k-triple-stores-8" \
 551                                         [mips_arch_list_matching mips1]
 552     run_dump_test_arches "24k-triple-stores-9" \
 553                                         [mips_arch_list_matching mips1]
 554     run_dump_test_arches "24k-triple-stores-10" \
 555                                         [mips_arch_list_matching mips1]
 556     run_dump_test_arches "24k-triple-stores-11" \
 557                                         [mips_arch_list_matching mips1]
 558
 559     run_dump_test_arches "jal-svr4pic"  [mips_arch_list_matching mips1]
 560     run_dump_test_arches "jal-svr4pic-noreorder" \
 561                                         [mips_arch_list_matching mips1]
 562     run_dump_test "jal-xgot"
 563     run_list_test_arches "jal-range" "-32" [mips_arch_list_matching mips1]
 564     if $has_newabi { run_dump_test "jal-newabi" }
 565     run_dump_test "la"
 566     run_dump_test "la-svr4pic"
 567     run_dump_test "la-xgot"
 568     run_dump_test "lca-svr4pic"
 569     run_dump_test "lca-xgot"
 570     # XXX FIXME: Has mips2 and later insns with mips1 disassemblies.
 571     # (Should split and then use appropriate arch lists.)
 572     run_dump_test_arches "lb"   [mips_arch_list_matching mips1 !mips2]
 573     run_dump_test_arches "lb-svr4pic" \
 574                                 [mips_arch_list_matching mips1 !gpr_ilocks]
 575     run_dump_test_arches "lb-svr4pic-ilocks" [mips_arch_list_matching gpr_ilocks]
 576     # Both versions specify the cpu, so we can run both regardless of
 577     # the interlocking in the configured default cpu.
 578     run_dump_test "lb-xgot"
 579     run_dump_test "lb-xgot-ilocks"
 580     run_dump_test_arches "ld"           [mips_arch_list_matching mips1]
 581     run_dump_test_arches "ld-forward"   [mips_arch_list_matching mips1]
 582     run_dump_test_arches "sd"           [mips_arch_list_matching mips1]
 583     run_dump_test_arches "sd-forward"   [mips_arch_list_matching mips1]
 584     run_dump_test_arches "l_d"          [mips_arch_list_matching mips1 !singlefloat]
 585     run_dump_test_arches "l_d-single"   [mips_arch_list_matching mips1 singlefloat]
 586     run_dump_test_arches "l_d-forward"  [mips_arch_list_matching mips1 !singlefloat]
 587     run_dump_test_arches "s_d"          [mips_arch_list_matching mips1 !singlefloat]
 588     run_dump_test_arches "s_d-single"   [mips_arch_list_matching mips1 singlefloat]
 589     run_dump_test_arches "s_d-forward"  [mips_arch_list_matching mips1 !singlefloat]
 590     run_dump_test_arches "ldc1"         [mips_arch_list_matching mips2 !singlefloat]
 591     run_dump_test_arches "ldc1-forward" [mips_arch_list_matching mips2 !singlefloat]
 592     run_dump_test_arches "sdc1"         [mips_arch_list_matching mips2 !singlefloat]
 593     run_dump_test_arches "sdc1-forward" [mips_arch_list_matching mips2 !singlefloat]
 594     if $has_newabi {
 595         run_dump_test_arches "ld-n32"   [mips_arch_list_matching mips3]
 596         run_dump_test_arches "ld-forward-n32" \
 597                                         [mips_arch_list_matching mips3]
 598         run_dump_test_arches "sd-n32"   [mips_arch_list_matching mips3]
 599         run_dump_test_arches "sd-forward-n32" \
 600                                         [mips_arch_list_matching mips3]
 601         run_dump_test_arches "l_d-n32"  [mips_arch_list_matching mips3 !singlefloat]
 602         run_dump_test_arches "l_d-forward-n32" \
 603                                         [mips_arch_list_matching mips3 !singlefloat]
 604         run_dump_test_arches "s_d-n32"  [mips_arch_list_matching mips3 !singlefloat]
 605         run_dump_test_arches "s_d-forward-n32" \
 606                                         [mips_arch_list_matching mips3 !singlefloat]
 607         run_dump_test_arches "ldc1-n32" [mips_arch_list_matching mips3 !singlefloat]
 608         run_dump_test_arches "ldc1-forward-n32" \
 609                                         [mips_arch_list_matching mips3 !singlefloat]
 610         run_dump_test_arches "sdc1-n32" [mips_arch_list_matching mips3 !singlefloat]
 611         run_dump_test_arches "sdc1-forward-n32" \
 612                                         [mips_arch_list_matching mips3 !singlefloat]
 613         run_dump_test_arches "ld-n64"   [mips_arch_list_matching mips3]
 614         run_dump_test_arches "ld-forward-n64" \
 615                                         [mips_arch_list_matching mips3]
 616         run_dump_test_arches "sd-n64"   [mips_arch_list_matching mips3]
 617         run_dump_test_arches "sd-forward-n64" \
 618                                         [mips_arch_list_matching mips3]
 619         run_dump_test_arches "l_d-n64"  [mips_arch_list_matching mips3 !singlefloat]
 620         run_dump_test_arches "l_d-forward-n64" \
 621                                         [mips_arch_list_matching mips3 !singlefloat]
 622         run_dump_test_arches "s_d-n64"  [mips_arch_list_matching mips3 !singlefloat]
 623         run_dump_test_arches "s_d-forward-n64" \
 624                                         [mips_arch_list_matching mips3 !singlefloat]
 625         run_dump_test_arches "ldc1-n64" [mips_arch_list_matching mips3 !singlefloat]
 626         run_dump_test_arches "ldc1-forward-n64" \
 627                                         [mips_arch_list_matching mips3 !singlefloat]
 628         run_dump_test_arches "sdc1-n64" [mips_arch_list_matching mips3 !singlefloat]
 629         run_dump_test_arches "sdc1-forward-n64" \
 630                                         [mips_arch_list_matching mips3 !singlefloat]
 631     }
 632     run_dump_test_arches "ld-zero"      [mips_arch_list_matching mips1]
 633     run_dump_test_arches "ld-zero-2"    [mips_arch_list_matching mips2 !nollsc]
 634     run_dump_test_arches "ld-zero-3"    [mips_arch_list_matching mips3 !nollsc]
 635     run_dump_test_arches "ld-zero-u"    [mips_arch_list_matching micromips]
 636     run_dump_test_arches "ld-zero-q"    [mips_arch_list_matching r5900]
 637     run_dump_test "ld-svr4pic"
 638     run_dump_test "ld-xgot"
 639     run_dump_test_arches "li"           [mips_arch_list_matching mips1]
 640     run_dump_test "lifloat"
 641     run_dump_test "lif-svr4pic"
 642     run_dump_test "lif-xgot"
 643     run_dump_test_arches "mips4"        [mips_arch_list_matching mips4]
 644     run_dump_test_arches "mips4-fp" "-32" \
 645                                         [mips_arch_list_matching fpisa4]
 646     run_dump_test_arches "mips4-fp" "-mabi=o64" \
 647                                         [mips_arch_list_matching fpisa4 gpr64]
 648     run_list_test_arches "mips4-fp" "-32 -msoft-float" \
 649                                         [mips_arch_list_matching fpisa4]
 650     run_dump_test_arches "mips4-branch-likely" \
 651                                         [mips_arch_list_matching mips4]
 652     run_list_test_arches "mips4-branch-likely" "-32 -msoft-float" \
 653                                         [mips_arch_list_matching mips4]
 654     run_dump_test_arches "mips5-fp" "-32" \
 655                                         [mips_arch_list_matching fpisa5]
 656     run_dump_test_arches "mips5-fp" "-mabi=o64" \
 657                                         [mips_arch_list_matching fpisa5 gpr64]
 658     run_dump_test "mul"
 659
 660     run_dump_test_arches "rol"          [mips_arch_list_matching mips1 !ror]
 661     run_dump_test_arches "rol-hw"       [mips_arch_list_matching ror]
 662
 663     run_dump_test_arches "rol64"        [mips_arch_list_matching gpr64 !ror]
 664     run_dump_test_arches "rol64-hw"     [mips_arch_list_matching gpr64 ror]
 665
 666     run_dump_test "sb"
 667     run_dump_test "trunc"
 668     run_dump_test "ulh"
 669     run_dump_test_arches "ulh2-eb"      [mips_arch_list_matching mips1]
 670     run_dump_test_arches "ulh2-el"      [mips_arch_list_matching mips1]
 671     run_dump_test "ulh-svr4pic"
 672     run_dump_test "ulh-xgot"
 673     run_dump_test "ulw"
 674     run_dump_test "uld"
 675     run_dump_test "ush"
 676     run_dump_test "usw"
 677     run_dump_test "usd"
 678     run_dump_test_arches "ulw2-eb" [mips_arch_list_matching mips1 !gpr_ilocks]
 679     run_dump_test_arches "ulw2-eb-ilocks" [mips_arch_list_matching gpr_ilocks]
 680     run_dump_test_arches "ulw2-el" [mips_arch_list_matching mips1 !gpr_ilocks]
 681     run_dump_test_arches "ulw2-el-ilocks" [mips_arch_list_matching gpr_ilocks]
 682
 683     run_dump_test_arches "uld2-eb" [mips_arch_list_matching mips3]
 684     run_dump_test_arches "uld2-el" [mips_arch_list_matching mips3]
 685
 686     run_dump_test "mips16"
 687     run_dump_test "mips16-64"
 688     run_dump_test "mips16-macro"
 689     # Check MIPS16e extensions
 690     run_dump_test_arches "mips16e" [mips_arch_list_matching mips32 !micromips]
 691     # Check jalx handling
 692     run_dump_test "mips16-jalx"
 693     run_dump_test "mips-jalx"
 694     run_dump_test "mips-jalx-2"
 695     # Check MIPS16 HI16/LO16 relocations
 696     run_dump_test "mips16-hilo"
 697     if $has_newabi {
 698         run_dump_test "mips16-hilo-n32"
 699     }
 700     run_dump_test "mips16-hilo-match"
 701     run_dump_test "delay"
 702     run_dump_test "nodelay"
 703     run_dump_test "mips4010"
 704     run_dump_test "mips4650"
 705     run_dump_test "mips4100"
 706     run_dump_test "vr4111"
 707     run_dump_test "vr4120"
 708     run_dump_test "vr4120-2"
 709     run_dump_test "vr4130"
 710     run_dump_test "vr5400"
 711     run_list_test "vr5400-ill" "-march=vr5400"
 712     run_dump_test "vr5500"
 713     run_dump_test "rm7000"
 714     run_dump_test "perfcount"
 715     run_dump_test "lineno"
 716     run_dump_test "sync"
 717
 718     run_dump_test_arches "virt"         [mips_arch_list_matching mips32r2]
 719     run_dump_test_arches "virt64"       [mips_arch_list_matching mips64r2]
 720
 721     run_dump_test_arches "mips32"       [mips_arch_list_matching mips32]
 722     run_dump_test_arches "mips32-imm"   [mips_arch_list_matching mips32]
 723
 724     run_dump_test_arches "mips32-sf32"  [mips_arch_list_matching mips32]
 725     run_list_test_arches "mips32-sf32" "-32 -msoft-float" \
 726                                         [mips_arch_list_matching mips32]
 727     run_dump_test_arches "mips32-cp2"   [mips_arch_list_matching mips32 \
 728                                             !octeon]
 729
 730     run_dump_test_arches "mips32r2"     [mips_arch_list_matching mips32r2]
 731     run_dump_test_arches "mips32r2-cp2" [mips_arch_list_matching mips32r2 \
 732                                             !octeon]
 733     run_dump_test_arches "mips32r2-fp32" \
 734                                         [mips_arch_list_matching mips32r2]
 735     run_list_test_arches "mips32r2-fp32" "-32 -msoft-float" \
 736                                         [mips_arch_list_matching mips32r2]
 737     run_list_test_arches "mips32r2-ill" "-32" \
 738                         [mips_arch_list_matching mips32r2 gpr32]
 739     run_list_test_arches "mips32r2-ill-fp64" "-mabi=o64" \
 740                         [mips_arch_list_matching mips32r2 gpr64]
 741     run_list_test_arches "mips32r2-ill-nofp" "-32 -msoft-float" \
 742                         [mips_arch_list_matching mips32r2]
 743
 744     run_dump_test_arches "mips64"       [mips_arch_list_matching mips64]
 745     run_dump_test_arches "mips64-cp2"   [mips_arch_list_matching mips64 \
 746                                             !octeon]
 747
 748     run_dump_test_arches "mips64r2"     [mips_arch_list_matching mips64r2]
 749     run_list_test_arches "mips64r2-ill" [mips_arch_list_matching mips64r2]
 750
 751     run_dump_test "set-arch"
 752
 753     if { !$addr32 } {
 754         run_dump_test "mips64-mips3d"
 755         run_dump_test_arches "mips64-mips3d-incl" [mips_arch_list_matching mips3d]
 756
 757         run_dump_test "mips64-mdmx"
 758         run_dump_test "sb1-ext-mdmx"
 759         run_dump_test "sb1-ext-ps"
 760         run_dump_test "xlr-ext"
 761     }
 762
 763     run_dump_test_arches "relax"        [mips_arch_list_matching mips2]
 764     run_dump_test_arches "relax-at"     [mips_arch_list_matching mips2]
 765     run_dump_test "relax-swap1-mips1"
 766     run_dump_test "relax-swap1-mips2"
 767     run_dump_test "relax-swap2"
 768     run_dump_test_arches "relax-swap3"  [mips_arch_list_all]
 769     run_list_test_arches "relax-bc1any" "-mips3d -relax-branch" \
 770                                         [mips_arch_list_matching mips64 \
 771                                             !micromips]
 772     run_list_test_arches "relax-bposge" "-mdsp -relax-branch" \
 773                                         [mips_arch_list_matching mips64r2 \
 774                                             !micromips]
 775
 776     run_dump_test_arches "eva"          [mips_arch_list_matching mips32r2 !octeon]
 777
 778     run_list_test "illegal" "-32"
 779     run_list_test "baddata1" "-32"
 780     run_list_test "jalr" ""
 781
 782     run_dump_test "mips-gp32-fp32"
 783     run_dump_test "mips-gp32-fp64"
 784     run_dump_test "mips-gp64-fp32"
 785     run_dump_test "mips-gp64-fp64"
 786
 787     # Make sure that -mcpu=FOO and -mFOO are equivalent.  Assemble a file
 788     # containing 4650-specific instructions with -m4650 and -mcpu=4650,
 789     # and verify that they're the same.  Specifically, we're checking
 790     # that the EF_MIPS_MACH field is set, and that the 4650 'mul'
 791     # instruction does get used.  In previous versions of GAS,
 792     # only -mcpu=4650 would set the EF_MIPS_MACH field; -m4650 wouldn't.
 793     run_dump_test "elf_e_flags1"
 794     run_dump_test "elf_e_flags2"
 795     run_dump_test "elf_e_flags3"
 796     run_dump_test "elf_e_flags4"
 797
 798     # Check EF_MIPS_ARCH markings for each supported architecture.
 799     run_dump_test "elf_arch_mips1"
 800     run_dump_test "elf_arch_mips2"
 801     run_dump_test "elf_arch_mips3"
 802     run_dump_test "elf_arch_mips4"
 803     run_dump_test "elf_arch_mips5"
 804     run_dump_test "elf_arch_mips32"
 805     run_dump_test "elf_arch_mips32r2"
 806     run_dump_test "elf_arch_mips64"
 807     run_dump_test "elf_arch_mips64r2"
 808
 809     # Verify that ASE markings are handled properly.
 810     run_dump_test "elf_ase_mips16"
 811     run_dump_test "elf_ase_mips16-2"
 812
 813     run_dump_test "elf_ase_micromips"
 814     run_dump_test "elf_ase_micromips-2"
 815
 816     run_dump_test "mips-gp32-fp32-pic"
 817     run_dump_test "mips-gp32-fp64-pic"
 818     run_dump_test "mips-gp64-fp32-pic"
 819     run_dump_test "mips-gp64-fp64-pic"
 820
 821     run_dump_test "mips-abi32"
 822     run_dump_test "mips-abi32-pic"
 823     run_dump_test "mips-abi32-pic2"
 824
 825     run_dump_test "elf${el}-rel"
 826     run_dump_test_arches "elf${el}-rel2" [mips_arch_list_matching gpr64 !singlefloat]
 827     run_dump_test "e32${el}-rel2"
 828     run_dump_test "elf${el}-rel3"
 829     run_dump_test_arches "elf-rel4" [mips_arch_list_matching gpr64]
 830     run_dump_test "e32-rel4"
 831     run_dump_test "elf-rel5"
 832     run_dump_test "elf-rel6"
 833     if $has_newabi {
 834         run_dump_test "elf-rel6-n32"
 835         run_dump_test "elf-rel6-n64"
 836     }
 837     run_dump_test "elf-rel7"
 838     run_dump_test "elf-rel8"
 839     run_dump_test "elf-rel8-mips16"
 840     run_dump_test "elf-rel9"
 841     run_dump_test "elf-rel9-mips16"
 842     if $has_newabi {
 843         run_dump_test "elf-rel10"
 844         run_dump_test "elf-rel11"
 845     }
 846     run_dump_test "elf-rel12"
 847     run_dump_test "elf-rel13"
 848     run_dump_test "elf-rel13-mips16"
 849     run_dump_test "elf-rel14"
 850
 851     if $has_newabi {
 852         run_dump_test "elf-rel15"
 853         run_dump_test "elf-rel16"
 854
 855         run_dump_test "elf-rel-got-n32"
 856         run_dump_test "elf-rel-xgot-n32"
 857         run_dump_test "elf-rel-got-n64"
 858         run_dump_test "elf-rel-xgot-n64"
 859     }
 860     run_dump_test "elf-rel17"
 861     if $has_newabi {
 862         run_dump_test "elf-rel18"
 863     }
 864     run_dump_test "elf-rel19"
 865     run_dump_test "elf-rel20"
 866     if $has_newabi {
 867         run_dump_test "elf-rel21"
 868         run_dump_test "elf-rel22"
 869         run_dump_test "elf-rel23"
 870         run_dump_test "elf-rel23a"
 871         run_dump_test "elf-rel23b"
 872         run_dump_test "elf-rel24"
 873     }
 874
 875     run_dump_test "elf-rel25"
 876     run_dump_test "elf-rel25a"
 877     run_dump_test "elf-rel26"
 878
 879     run_dump_test_arches "elf-rel27" [mips_arch_list_all]
 880
 881     if $has_newabi {
 882         run_dump_test "elf-rel28-n32"
 883         run_dump_test "elf-rel28-n64"
 884         run_dump_test_arches "elf-rel29" [mips_arch_list_matching mips3]
 885     }
 886     run_list_test_arches "elf-rel30" "-32" [mips_arch_list_all]
 887
 888     run_dump_test "${tmips}mips${el}16-e"
 889     run_dump_test "${tmips}mips${el}16-f"
 890
 891     run_dump_test "elf-consthilo"
 892     run_dump_test "expr1"
 893
 894     run_list_test "tls-ill" "-32"
 895     run_dump_test "tls-o32"
 896     run_dump_test "tls-relw"
 897     run_dump_test "jalr2"
 898     run_dump_test_arches "jalr3"        [mips_arch_list_matching mips1 \
 899                                         !micromips]
 900     if $has_newabi {
 901         run_dump_test_arches "jalr3-n32" \
 902                                     [mips_arch_list_matching mips3 \
 903                                         !micromips]
 904         run_dump_test_arches "jalr3-n64" \
 905                                     [mips_arch_list_matching mips3 \
 906                                         !micromips]
 907     }
 908
 909     run_dump_test_arches "aent" [mips_arch_list_matching mips1]
 910
 911     run_dump_test_arches "branch-misc-4"        [mips_arch_list_matching mips1]
 912     run_dump_test_arches "branch-misc-4-64"     [mips_arch_list_matching mips3]
 913
 914     run_dump_test_arches "loc-swap"     [mips_arch_list_all]
 915     run_dump_test_arches "loc-swap-dis" [mips_arch_list_all]
 916     run_dump_test_arches "loc-swap-2"   [mips_arch_list_all]
 917     run_dump_test_arches "loc-swap-3"   [mips_arch_list_all]
 918
 919     run_dump_test "nan-legacy-1"
 920     run_dump_test "nan-legacy-2"
 921     run_dump_test "nan-legacy-3"
 922     run_dump_test "nan-legacy-4"
 923     run_dump_test "nan-legacy-5"
 924
 925     run_dump_test "nan-2008-1"
 926     run_dump_test "nan-2008-2"
 927     run_dump_test "nan-2008-3"
 928     run_dump_test "nan-2008-4"
 929
 930     run_list_test "nan-error-1"
 931     run_list_test "nan-error-2" "-mnan=foo"
 932
 933     if $has_newabi {
 934         run_dump_test "n32-consec"
 935     }
 936
 937     # tests of objdump's ability to disassemble using different
 938     # register names.
 939     run_dump_test "gpr-names-numeric"
 940     run_dump_test "gpr-names-32"
 941     run_dump_test "gpr-names-n32"
 942     run_dump_test "gpr-names-64"
 943
 944     run_dump_test "fpr-names-numeric"
 945     run_dump_test "fpr-names-32"
 946     run_dump_test "fpr-names-n32"
 947     run_dump_test "fpr-names-64"
 948
 949     run_dump_test "cp0-names-numeric"
 950     run_dump_test "cp0-names-r3000"
 951     run_dump_test "cp0-names-r4000" \
 952                   { { {name} {(r4000)} } { {objdump} {-M cp0-names=r4000} } }
 953     run_dump_test "cp0-names-r4000" \
 954                   { { {name} {(r4400)} } { {objdump} {-M cp0-names=r4400} } }
 955     run_dump_test "cp0-names-mips32"
 956     run_dump_test "cp0-names-mips32r2"
 957     run_dump_test "cp0-names-mips64"
 958     run_dump_test "cp0-names-mips64r2"
 959     run_dump_test "cp0-names-sb1"
 960
 961     run_dump_test "cp0sel-names-numeric"
 962     run_dump_test "cp0sel-names-mips32"
 963     run_dump_test "cp0sel-names-mips32r2"
 964     run_dump_test "cp0sel-names-mips64"
 965     run_dump_test "cp0sel-names-mips64r2"
 966     run_dump_test "cp0sel-names-sb1"
 967
 968     run_dump_test "hwr-names-numeric"
 969     run_dump_test "hwr-names-mips32r2"
 970     run_dump_test "hwr-names-mips64r2"
 971
 972     run_dump_test "ldstla-32"
 973     run_dump_test "ldstla-32-mips3"
 974     run_dump_test "ldstla-32-shared"
 975     run_dump_test "ldstla-32-mips3-shared"
 976     run_list_test "ldstla-32-1" "-mabi=32" \
 977         "MIPS ld-st-la bad constants (ABI o32)"
 978     run_list_test "ldstla-32-mips3-1" "-mabi=32" \
 979         "MIPS ld-st-la bad constants (ABI o32, mips3)"
 980     run_list_test "ldstla-32-1" "-KPIC -mabi=32" \
 981         "MIPS ld-st-la bad constants (ABI o32, shared)"
 982     run_list_test "ldstla-32-mips3-1" "-KPIC -mabi=32" \
 983         "MIPS ld-st-la bad constants (ABI o32, mips3, shared)"
 984     run_dump_test "ldstla-eabi64"
 985     if $has_newabi {
 986         run_dump_test "ldstla-n64"
 987         run_dump_test "ldstla-n64-shared"
 988         run_dump_test "ldstla-n64-sym32"
 989     }
 990
 991     run_dump_test "macro-warn-1"
 992     run_dump_test "macro-warn-2"
 993     run_dump_test "macro-warn-3"
 994     run_dump_test "macro-warn-4"
 995     if $has_newabi {
 996         run_dump_test "macro-warn-1-n32"
 997         run_dump_test "macro-warn-2-n32"
 998     }
 999
1000     run_dump_test "noat-1"
1001     run_list_test "noat-2" ""
1002     run_list_test "noat-3" ""
1003     run_list_test "noat-4" ""
1004     run_list_test "noat-5" ""
1005     run_list_test "noat-6" ""
1006     run_list_test "noat-7" ""
1007
1008     run_dump_test "at-1"
1009     run_list_test "at-2" "-32 -mips1" "MIPS at-2"
1010
1011     run_dump_test "loongson-2e"
1012     run_dump_test "loongson-2f"
1013     run_dump_test "loongson-2f-2"
1014     run_dump_test "loongson-2f-3"
1015
1016     run_dump_test "loongson-3a"
1017     run_dump_test "loongson-3a-2"
1018     run_dump_test "loongson-3a-3"
1019
1020     run_dump_test_arches "octeon"       [mips_arch_list_matching octeon]
1021     run_dump_test_arches "octeon-saa-saad" [mips_arch_list_matching octeonp]
1022     run_list_test_arches "octeon-ill"   [mips_arch_list_matching octeon]
1023     run_dump_test_arches "octeon-pref"  [mips_arch_list_matching octeon]
1024     run_dump_test_arches "octeon2"      [mips_arch_list_matching octeon2]
1025
1026     run_dump_test "smartmips"
1027     run_dump_test_arches "mips32-dsp"   [mips_arch_list_matching mips32r2 \
1028                                             !octeon]
1029     run_dump_test_arches "mips32-dspr2" [mips_arch_list_matching mips32r2 \
1030                                             !octeon]
1031     run_dump_test "mips64-dsp"
1032     run_dump_test "mips32-mt"
1033
1034     run_dump_test "mips16-dwarf2"
1035     if $has_newabi {
1036         run_dump_test "mips16-dwarf2-n32"
1037     }
1038     run_dump_test "mips16-stabs"
1039
1040     run_dump_test "mips16e-jrc"
1041     run_dump_test "mips16e-save"
1042     run_dump_test "mips16e-64"
1043     run_list_test "mips16e-64" "-march=mips32 -32"
1044     run_dump_test "mips16-intermix"
1045
1046     run_dump_test "vxworks1"
1047     run_dump_test "vxworks1-xgot"
1048     run_dump_test "vxworks1-el"
1049     run_dump_test "vxworks1-xgot-el"
1050
1051     run_dump_test "noreorder"
1052     run_dump_test "align"
1053     run_dump_test "align2"
1054     run_dump_test "align2-el"
1055     run_dump_test "align3"
1056     run_dump_test "odd-float"
1057     run_dump_test "ehword"
1058
1059     run_list_test_arches "mips-macro-ill-sfp" "-32 -msingle-float" \
1060                                         [mips_arch_list_matching mips2]
1061     run_list_test_arches "mips-macro-ill-nofp" "-32 -msoft-float" \
1062                                         [mips_arch_list_matching mips2]
1063
1064     run_list_test_arches "mips-hard-float-flag" \
1065         "-32 -msoft-float -mhard-float" \
1066         [mips_arch_list_matching mips1 !singlefloat]
1067     run_list_test_arches "mips-double-float-flag" \
1068         "-32 -msingle-float -mdouble-float" \
1069         [mips_arch_list_matching mips1 !singlefloat]
1070
1071     run_dump_test "mips16-vis-1"
1072     run_dump_test "call-nonpic-1"
1073     run_dump_test "mips32-sync"
1074     run_dump_test_arches "mips32r2-sync" \
1075                                         [mips_arch_list_matching mips32r2]
1076     run_dump_test_arches "alnv_ps-swap" [mips_arch_list_matching fpisa5]
1077     run_dump_test_arches "cache" [lsort -dictionary -unique [concat \
1078                                         [mips_arch_list_matching mips3] \
1079                                         [mips_arch_list_matching mips32] ] ]
1080     run_dump_test_arches "daddi"        [mips_arch_list_matching mips3]
1081     run_dump_test_arches "pref" [lsort -dictionary -unique [concat \
1082                                         [mips_arch_list_matching mips4] \
1083                                         [mips_arch_list_matching mips32] ] ]
1084
1085     if $has_newabi { run_dump_test "cfi-n64-1" }
1086
1087     run_dump_test "pr12915"
1088     run_dump_test "reginfo-1a"
1089     run_dump_test "reginfo-1b"
1090
1091     run_dump_test "micromips"
1092     run_dump_test "micromips-trap"
1093     run_dump_test "micromips-insn32"
1094     run_dump_test "micromips-noinsn32"
1095     run_list_test "micromips" "-mips32r2 -32 -mfp64 -minsn32" \
1096         "microMIPS for MIPS32r2 (instructions invalid in insn32 mode)"
1097     run_list_test "micromips-size-0" \
1098         "-32 -march=mips64 -mmicromips" "microMIPS instruction size 0"
1099     run_dump_test "micromips-size-1"
1100     run_dump_test "micromips-branch-relax"
1101     run_dump_test "micromips-branch-relax-pic"
1102     run_dump_test "micromips-branch-delay"
1103     run_dump_test "micromips-warn-branch-delay"
1104     run_dump_test "micromips-warn-branch-delay-1"
1105     run_dump_test "micromips-b16"
1106     run_list_test "micromips-ill"
1107
1108     run_dump_test_arches "mcu"          [mips_arch_list_matching mips32r2 \
1109                                             !octeon]
1110     run_dump_test_arches "hilo-diff-eb" [mips_arch_list_all]
1111     run_dump_test_arches "hilo-diff-el" [mips_arch_list_all]
1112     if $has_newabi {
1113         run_dump_test_arches "hilo-diff-eb-n32" [mips_arch_list_matching mips3]
1114         run_dump_test_arches "hilo-diff-el-n32" [mips_arch_list_matching mips3]
1115         run_dump_test_arches "hilo-diff-eb-n64" [mips_arch_list_matching mips3]
1116         run_dump_test_arches "hilo-diff-el-n64" [mips_arch_list_matching mips3]
1117     }
1118     run_dump_test_arches "lui"          [mips_arch_list_matching mips1]
1119     run_list_test_arches "lui-1" "-32"  [mips_arch_list_matching mips1]
1120     run_list_test_arches "lui-2" "-32"  [mips_arch_list_matching mips1]
1121
1122     run_dump_test "r5900"
1123     run_dump_test "r5900-full"
1124     run_list_test "r5900-nollsc" "-mabi=o64 -march=r5900"
1125     run_dump_test "r5900-vu0"
1126
1127     run_list_test_arches "ext-ill"      [mips_arch_list_matching mips64r2]
1128
1129     run_list_test "ase-errors-1" "-mabi=32 -march=mips1" "ASE errors (1)"
1130     run_list_test "ase-errors-2" "-mabi=o64 -march=mips3" "ASE errors (2)"
1131     run_list_test "ase-errors-3" "-mabi=32 -march=mips1" "ASE errors (3)"
1132     run_list_test "ase-errors-4" "-mabi=o64 -march=mips3" "ASE errors (4)"
1133
1134     run_dump_test_arches "la-reloc"     [mips_arch_list_matching mips1]
1135     if { $has_newabi } {
1136         run_dump_test_arches "dla-reloc" [mips_arch_list_matching mips3]
1137     }
1138
1139     # Start with MIPS II to avoid load delay nops.
1140     run_dump_test_arches "ld-reloc"     [mips_arch_list_matching mips2]
1141     run_dump_test_arches "ulw-reloc"    [mips_arch_list_matching mips2]
1142     run_dump_test_arches "ulh-reloc"    [mips_arch_list_matching mips2]
1143
1144     run_dump_test "l_d-reloc"
1145 }