1 /* expr.c -operands, expressions-
2 Copyright 1987, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
3 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2009
4 Free Software Foundation, Inc.
6 This file is part of GAS, the GNU Assembler.
8 GAS is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 3, or (at your option)
13 GAS is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with GAS; see the file COPYING. If not, write to the Free
20 Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
23 /* This is really a branch office of as-read.c. I split it out to clearly
24 distinguish the world of expressions from the world of statements.
25 (It also gives smaller files to re-compile.)
26 Here, "operand"s are of expressions, not instructions. */
28 #define min(a, b) ((a) < (b) ? (a) : (b))
31 #include "safe-ctype.h"
41 static void floating_constant (expressionS * expressionP);
42 static valueT generic_bignum_to_int32 (void);
44 static valueT generic_bignum_to_int64 (void);
46 static void integer_constant (int radix, expressionS * expressionP);
47 static void mri_char_constant (expressionS *);
48 static void current_location (expressionS *);
49 static void clean_up_expression (expressionS * expressionP);
50 static segT operand (expressionS *, enum expr_mode);
51 static operatorT operator (int *);
53 extern const char EXP_CHARS[], FLT_CHARS[];
55 /* We keep a mapping of expression symbols to file positions, so that
56 we can provide better error messages. */
58 struct expr_symbol_line {
59 struct expr_symbol_line *next;
65 static struct expr_symbol_line *expr_symbol_lines;
67 /* Build a dummy symbol to hold a complex expression. This is how we
68 build expressions up out of other expressions. The symbol is put
69 into the fake section expr_section. */
72 make_expr_symbol (expressionS *expressionP)
76 struct expr_symbol_line *n;
78 if (expressionP->X_op == O_symbol
79 && expressionP->X_add_number == 0)
80 return expressionP->X_add_symbol;
82 if (expressionP->X_op == O_big)
84 /* This won't work, because the actual value is stored in
85 generic_floating_point_number or generic_bignum, and we are
86 going to lose it if we haven't already. */
87 if (expressionP->X_add_number > 0)
88 as_bad (_("bignum invalid"));
90 as_bad (_("floating point number invalid"));
91 zero.X_op = O_constant;
92 zero.X_add_number = 0;
94 clean_up_expression (&zero);
98 /* Putting constant symbols in absolute_section rather than
99 expr_section is convenient for the old a.out code, for which
100 S_GET_SEGMENT does not always retrieve the value put in by
102 symbolP = symbol_create (FAKE_LABEL_NAME,
103 (expressionP->X_op == O_constant
105 : expressionP->X_op == O_register
108 0, &zero_address_frag);
109 symbol_set_value_expression (symbolP, expressionP);
111 if (expressionP->X_op == O_constant)
112 resolve_symbol_value (symbolP);
114 n = (struct expr_symbol_line *) xmalloc (sizeof *n);
116 as_where (&n->file, &n->line);
117 n->next = expr_symbol_lines;
118 expr_symbol_lines = n;
123 /* Return the file and line number for an expr symbol. Return
124 non-zero if something was found, 0 if no information is known for
128 expr_symbol_where (symbolS *sym, char **pfile, unsigned int *pline)
130 register struct expr_symbol_line *l;
132 for (l = expr_symbol_lines; l != NULL; l = l->next)
145 /* Utilities for building expressions.
146 Since complex expressions are recorded as symbols for use in other
147 expressions these return a symbolS * and not an expressionS *.
148 These explicitly do not take an "add_number" argument. */
149 /* ??? For completeness' sake one might want expr_build_symbol.
150 It would just return its argument. */
152 /* Build an expression for an unsigned constant.
153 The corresponding one for signed constants is missing because
154 there's currently no need for it. One could add an unsigned_p flag
155 but that seems more clumsy. */
158 expr_build_uconstant (offsetT value)
163 e.X_add_number = value;
165 return make_expr_symbol (&e);
168 /* Build an expression for the current location ('.'). */
171 expr_build_dot (void)
175 current_location (&e);
176 return make_expr_symbol (&e);
179 /* Build any floating-point literal here.
180 Also build any bignum literal here. */
182 /* Seems atof_machine can backscan through generic_bignum and hit whatever
183 happens to be loaded before it in memory. And its way too complicated
184 for me to fix right. Thus a hack. JF: Just make generic_bignum bigger,
185 and never write into the early words, thus they'll always be zero.
186 I hate Dean's floating-point code. Bleh. */
187 LITTLENUM_TYPE generic_bignum[SIZE_OF_LARGE_NUMBER + 6];
189 FLONUM_TYPE generic_floating_point_number = {
190 &generic_bignum[6], /* low. (JF: Was 0) */
191 &generic_bignum[SIZE_OF_LARGE_NUMBER + 6 - 1], /* high. JF: (added +6) */
199 floating_constant (expressionS *expressionP)
201 /* input_line_pointer -> floating-point constant. */
204 error_code = atof_generic (&input_line_pointer, ".", EXP_CHARS,
205 &generic_floating_point_number);
209 if (error_code == ERROR_EXPONENT_OVERFLOW)
211 as_bad (_("bad floating-point constant: exponent overflow"));
215 as_bad (_("bad floating-point constant: unknown error code=%d"),
219 expressionP->X_op = O_big;
220 /* input_line_pointer -> just after constant, which may point to
222 expressionP->X_add_number = -1;
226 generic_bignum_to_int32 (void)
229 ((generic_bignum[1] & LITTLENUM_MASK) << LITTLENUM_NUMBER_OF_BITS)
230 | (generic_bignum[0] & LITTLENUM_MASK);
231 number &= 0xffffffff;
237 generic_bignum_to_int64 (void)
240 ((((((((valueT) generic_bignum[3] & LITTLENUM_MASK)
241 << LITTLENUM_NUMBER_OF_BITS)
242 | ((valueT) generic_bignum[2] & LITTLENUM_MASK))
243 << LITTLENUM_NUMBER_OF_BITS)
244 | ((valueT) generic_bignum[1] & LITTLENUM_MASK))
245 << LITTLENUM_NUMBER_OF_BITS)
246 | ((valueT) generic_bignum[0] & LITTLENUM_MASK));
252 integer_constant (int radix, expressionS *expressionP)
254 char *start; /* Start of number. */
257 valueT number; /* Offset or (absolute) value. */
258 short int digit; /* Value of next digit in current radix. */
259 short int maxdig = 0; /* Highest permitted digit value. */
260 int too_many_digits = 0; /* If we see >= this number of. */
261 char *name; /* Points to name of symbol. */
262 symbolS *symbolP; /* Points to symbol. */
264 int small; /* True if fits in 32 bits. */
266 /* May be bignum, or may fit in 32 bits. */
267 /* Most numbers fit into 32 bits, and we want this case to be fast.
268 so we pretend it will fit into 32 bits. If, after making up a 32
269 bit number, we realise that we have scanned more digits than
270 comfortably fit into 32 bits, we re-scan the digits coding them
271 into a bignum. For decimal and octal numbers we are
272 conservative: Some numbers may be assumed bignums when in fact
273 they do fit into 32 bits. Numbers of any radix can have excess
274 leading zeros: We strive to recognise this and cast them back
275 into 32 bits. We must check that the bignum really is more than
276 32 bits, and change it back to a 32-bit number if it fits. The
277 number we are looking for is expected to be positive, but if it
278 fits into 32 bits as an unsigned number, we let it be a 32-bit
279 number. The cavalier approach is for speed in ordinary cases. */
280 /* This has been extended for 64 bits. We blindly assume that if
281 you're compiling in 64-bit mode, the target is a 64-bit machine.
282 This should be cleaned up. */
286 #else /* includes non-bfd case, mostly */
290 if ((NUMBERS_WITH_SUFFIX || flag_m68k_mri) && radix == 0)
294 /* In MRI mode, the number may have a suffix indicating the
295 radix. For that matter, it might actually be a floating
297 for (suffix = input_line_pointer; ISALNUM (*suffix); suffix++)
299 if (*suffix == 'e' || *suffix == 'E')
303 if (suffix == input_line_pointer)
312 /* If we have both NUMBERS_WITH_SUFFIX and LOCAL_LABELS_FB,
313 we distinguish between 'B' and 'b'. This is the case for
315 if ((NUMBERS_WITH_SUFFIX && LOCAL_LABELS_FB ? *suffix : c) == 'B')
319 else if (c == 'O' || c == 'Q')
323 else if (suffix[1] == '.' || c == 'E' || flt)
325 floating_constant (expressionP);
340 too_many_digits = valuesize + 1;
344 too_many_digits = (valuesize + 2) / 3 + 1;
348 too_many_digits = (valuesize + 3) / 4 + 1;
352 too_many_digits = (valuesize + 11) / 4; /* Very rough. */
355 start = input_line_pointer;
356 c = *input_line_pointer++;
358 (digit = hex_value (c)) < maxdig;
359 c = *input_line_pointer++)
361 number = number * radix + digit;
363 /* c contains character after number. */
364 /* input_line_pointer->char after c. */
365 small = (input_line_pointer - start - 1) < too_many_digits;
367 if (radix == 16 && c == '_')
369 /* This is literal of the form 0x333_0_12345678_1.
370 This example is equivalent to 0x00000333000000001234567800000001. */
372 int num_little_digits = 0;
374 input_line_pointer = start; /* -> 1st digit. */
376 know (LITTLENUM_NUMBER_OF_BITS == 16);
378 for (c = '_'; c == '_'; num_little_digits += 2)
381 /* Convert one 64-bit word. */
384 for (c = *input_line_pointer++;
385 (digit = hex_value (c)) < maxdig;
386 c = *(input_line_pointer++))
388 number = number * radix + digit;
392 /* Check for 8 digit per word max. */
394 as_bad (_("a bignum with underscores may not have more than 8 hex digits in any word"));
396 /* Add this chunk to the bignum.
397 Shift things down 2 little digits. */
398 know (LITTLENUM_NUMBER_OF_BITS == 16);
399 for (i = min (num_little_digits + 1, SIZE_OF_LARGE_NUMBER - 1);
402 generic_bignum[i] = generic_bignum[i - 2];
404 /* Add the new digits as the least significant new ones. */
405 generic_bignum[0] = number & 0xffffffff;
406 generic_bignum[1] = number >> 16;
409 /* Again, c is char after number, input_line_pointer->after c. */
411 if (num_little_digits > SIZE_OF_LARGE_NUMBER - 1)
412 num_little_digits = SIZE_OF_LARGE_NUMBER - 1;
414 gas_assert (num_little_digits >= 4);
416 if (num_little_digits != 8)
417 as_bad (_("a bignum with underscores must have exactly 4 words"));
419 /* We might have some leading zeros. These can be trimmed to give
420 us a change to fit this constant into a small number. */
421 while (generic_bignum[num_little_digits - 1] == 0
422 && num_little_digits > 1)
425 if (num_little_digits <= 2)
427 /* will fit into 32 bits. */
428 number = generic_bignum_to_int32 ();
432 else if (num_little_digits <= 4)
434 /* Will fit into 64 bits. */
435 number = generic_bignum_to_int64 ();
443 /* Number of littlenums in the bignum. */
444 number = num_little_digits;
449 /* We saw a lot of digits. manufacture a bignum the hard way. */
450 LITTLENUM_TYPE *leader; /* -> high order littlenum of the bignum. */
451 LITTLENUM_TYPE *pointer; /* -> littlenum we are frobbing now. */
454 leader = generic_bignum;
455 generic_bignum[0] = 0;
456 generic_bignum[1] = 0;
457 generic_bignum[2] = 0;
458 generic_bignum[3] = 0;
459 input_line_pointer = start; /* -> 1st digit. */
460 c = *input_line_pointer++;
461 for (; (carry = hex_value (c)) < maxdig; c = *input_line_pointer++)
463 for (pointer = generic_bignum; pointer <= leader; pointer++)
467 work = carry + radix * *pointer;
468 *pointer = work & LITTLENUM_MASK;
469 carry = work >> LITTLENUM_NUMBER_OF_BITS;
473 if (leader < generic_bignum + SIZE_OF_LARGE_NUMBER - 1)
475 /* Room to grow a longer bignum. */
480 /* Again, c is char after number. */
481 /* input_line_pointer -> after c. */
482 know (LITTLENUM_NUMBER_OF_BITS == 16);
483 if (leader < generic_bignum + 2)
485 /* Will fit into 32 bits. */
486 number = generic_bignum_to_int32 ();
490 else if (leader < generic_bignum + 4)
492 /* Will fit into 64 bits. */
493 number = generic_bignum_to_int64 ();
499 /* Number of littlenums in the bignum. */
500 number = leader - generic_bignum + 1;
504 if ((NUMBERS_WITH_SUFFIX || flag_m68k_mri)
506 && input_line_pointer - 1 == suffix)
507 c = *input_line_pointer++;
511 /* Here with number, in correct radix. c is the next char.
512 Note that unlike un*x, we allow "011f" "0x9f" to both mean
513 the same as the (conventional) "9f".
514 This is simply easier than checking for strict canonical
517 if (LOCAL_LABELS_FB && c == 'b')
519 /* Backward ref to local label.
520 Because it is backward, expect it to be defined. */
521 /* Construct a local label. */
522 name = fb_label_name ((int) number, 0);
524 /* Seen before, or symbol is defined: OK. */
525 symbolP = symbol_find (name);
526 if ((symbolP != NULL) && (S_IS_DEFINED (symbolP)))
528 /* Local labels are never absolute. Don't waste time
529 checking absoluteness. */
530 know (SEG_NORMAL (S_GET_SEGMENT (symbolP)));
532 expressionP->X_op = O_symbol;
533 expressionP->X_add_symbol = symbolP;
537 /* Either not seen or not defined. */
538 /* @@ Should print out the original string instead of
539 the parsed number. */
540 as_bad (_("backward ref to unknown label \"%d:\""),
542 expressionP->X_op = O_constant;
545 expressionP->X_add_number = 0;
547 else if (LOCAL_LABELS_FB && c == 'f')
549 /* Forward reference. Expect symbol to be undefined or
550 unknown. undefined: seen it before. unknown: never seen
553 Construct a local label name, then an undefined symbol.
554 Don't create a xseg frag for it: caller may do that.
555 Just return it as never seen before. */
556 name = fb_label_name ((int) number, 1);
557 symbolP = symbol_find_or_make (name);
558 /* We have no need to check symbol properties. */
559 #ifndef many_segments
560 /* Since "know" puts its arg into a "string", we
561 can't have newlines in the argument. */
562 know (S_GET_SEGMENT (symbolP) == undefined_section || S_GET_SEGMENT (symbolP) == text_section || S_GET_SEGMENT (symbolP) == data_section);
564 expressionP->X_op = O_symbol;
565 expressionP->X_add_symbol = symbolP;
566 expressionP->X_add_number = 0;
568 else if (LOCAL_LABELS_DOLLAR && c == '$')
570 /* If the dollar label is *currently* defined, then this is just
571 another reference to it. If it is not *currently* defined,
572 then this is a fresh instantiation of that number, so create
575 if (dollar_label_defined ((long) number))
577 name = dollar_label_name ((long) number, 0);
578 symbolP = symbol_find (name);
579 know (symbolP != NULL);
583 name = dollar_label_name ((long) number, 1);
584 symbolP = symbol_find_or_make (name);
587 expressionP->X_op = O_symbol;
588 expressionP->X_add_symbol = symbolP;
589 expressionP->X_add_number = 0;
593 expressionP->X_op = O_constant;
594 expressionP->X_add_number = number;
595 input_line_pointer--; /* Restore following character. */
596 } /* Really just a number. */
600 /* Not a small number. */
601 expressionP->X_op = O_big;
602 expressionP->X_add_number = number; /* Number of littlenums. */
603 input_line_pointer--; /* -> char following number. */
607 /* Parse an MRI multi character constant. */
610 mri_char_constant (expressionS *expressionP)
614 if (*input_line_pointer == '\''
615 && input_line_pointer[1] != '\'')
617 expressionP->X_op = O_constant;
618 expressionP->X_add_number = 0;
622 /* In order to get the correct byte ordering, we must build the
623 number in reverse. */
624 for (i = SIZE_OF_LARGE_NUMBER - 1; i >= 0; i--)
628 generic_bignum[i] = 0;
629 for (j = 0; j < CHARS_PER_LITTLENUM; j++)
631 if (*input_line_pointer == '\'')
633 if (input_line_pointer[1] != '\'')
635 ++input_line_pointer;
637 generic_bignum[i] <<= 8;
638 generic_bignum[i] += *input_line_pointer;
639 ++input_line_pointer;
642 if (i < SIZE_OF_LARGE_NUMBER - 1)
644 /* If there is more than one littlenum, left justify the
645 last one to make it match the earlier ones. If there is
646 only one, we can just use the value directly. */
647 for (; j < CHARS_PER_LITTLENUM; j++)
648 generic_bignum[i] <<= 8;
651 if (*input_line_pointer == '\''
652 && input_line_pointer[1] != '\'')
658 as_bad (_("character constant too large"));
667 c = SIZE_OF_LARGE_NUMBER - i;
668 for (j = 0; j < c; j++)
669 generic_bignum[j] = generic_bignum[i + j];
673 know (LITTLENUM_NUMBER_OF_BITS == 16);
676 expressionP->X_op = O_big;
677 expressionP->X_add_number = i;
681 expressionP->X_op = O_constant;
683 expressionP->X_add_number = generic_bignum[0] & LITTLENUM_MASK;
685 expressionP->X_add_number =
686 (((generic_bignum[1] & LITTLENUM_MASK)
687 << LITTLENUM_NUMBER_OF_BITS)
688 | (generic_bignum[0] & LITTLENUM_MASK));
691 /* Skip the final closing quote. */
692 ++input_line_pointer;
695 /* Return an expression representing the current location. This
696 handles the magic symbol `.'. */
699 current_location (expressionS *expressionp)
701 if (now_seg == absolute_section)
703 expressionp->X_op = O_constant;
704 expressionp->X_add_number = abs_section_offset;
708 expressionp->X_op = O_symbol;
709 expressionp->X_add_symbol = symbol_temp_new_now ();
710 expressionp->X_add_number = 0;
714 /* In: Input_line_pointer points to 1st char of operand, which may
718 The operand may have been empty: in this case X_op == O_absent.
719 Input_line_pointer->(next non-blank) char after operand. */
722 operand (expressionS *expressionP, enum expr_mode mode)
725 symbolS *symbolP; /* Points to symbol. */
726 char *name; /* Points to name of symbol. */
729 /* All integers are regarded as unsigned unless they are negated.
730 This is because the only thing which cares whether a number is
731 unsigned is the code in emit_expr which extends constants into
732 bignums. It should only sign extend negative numbers, so that
733 something like ``.quad 0x80000000'' is not sign extended even
734 though it appears negative if valueT is 32 bits. */
735 expressionP->X_unsigned = 1;
737 /* Digits, assume it is a bignum. */
739 SKIP_WHITESPACE (); /* Leading whitespace is part of operand. */
740 c = *input_line_pointer++; /* input_line_pointer -> past char in c. */
742 if (is_end_of_line[(unsigned char) c])
756 input_line_pointer--;
758 integer_constant ((NUMBERS_WITH_SUFFIX || flag_m68k_mri)
763 #ifdef LITERAL_PREFIXDOLLAR_HEX
765 /* $L is the start of a local label, not a hex constant. */
766 if (* input_line_pointer == 'L')
768 integer_constant (16, expressionP);
772 #ifdef LITERAL_PREFIXPERCENT_BIN
774 integer_constant (2, expressionP);
779 /* Non-decimal radix. */
781 if (NUMBERS_WITH_SUFFIX || flag_m68k_mri)
785 /* Check for a hex or float constant. */
786 for (s = input_line_pointer; hex_p (*s); s++)
788 if (*s == 'h' || *s == 'H' || *input_line_pointer == '.')
790 --input_line_pointer;
791 integer_constant (0, expressionP);
795 c = *input_line_pointer;
804 if (NUMBERS_WITH_SUFFIX || flag_m68k_mri)
806 integer_constant (0, expressionP);
812 if (c && strchr (FLT_CHARS, c))
814 input_line_pointer++;
815 floating_constant (expressionP);
816 expressionP->X_add_number = - TOLOWER (c);
820 /* The string was only zero. */
821 expressionP->X_op = O_constant;
822 expressionP->X_add_number = 0;
831 input_line_pointer++;
832 integer_constant (16, expressionP);
836 if (LOCAL_LABELS_FB && ! (flag_m68k_mri || NUMBERS_WITH_SUFFIX))
838 /* This code used to check for '+' and '-' here, and, in
839 some conditions, fall through to call
840 integer_constant. However, that didn't make sense,
841 as integer_constant only accepts digits. */
842 /* Some of our code elsewhere does permit digits greater
843 than the expected base; for consistency, do the same
845 if (input_line_pointer[1] < '0'
846 || input_line_pointer[1] > '9')
848 /* Parse this as a back reference to label 0. */
849 input_line_pointer--;
850 integer_constant (10, expressionP);
853 /* Otherwise, parse this as a binary number. */
857 input_line_pointer++;
858 if (flag_m68k_mri || NUMBERS_WITH_SUFFIX)
860 integer_constant (2, expressionP);
871 integer_constant ((flag_m68k_mri || NUMBERS_WITH_SUFFIX)
879 /* If it says "0f" and it could possibly be a floating point
880 number, make it one. Otherwise, make it a local label,
881 and try to deal with parsing the rest later. */
882 if (!input_line_pointer[1]
883 || (is_end_of_line[0xff & input_line_pointer[1]])
884 || strchr (FLT_CHARS, 'f') == NULL)
887 char *cp = input_line_pointer + 1;
888 int r = atof_generic (&cp, ".", EXP_CHARS,
889 &generic_floating_point_number);
893 case ERROR_EXPONENT_OVERFLOW:
894 if (*cp == 'f' || *cp == 'b')
895 /* Looks like a difference expression. */
897 else if (cp == input_line_pointer + 1)
898 /* No characters has been accepted -- looks like
904 as_fatal (_("expr.c(operand): bad atof_generic return val %d"),
909 /* Okay, now we've sorted it out. We resume at one of these
910 two labels, depending on what we've decided we're probably
913 input_line_pointer--;
914 integer_constant (10, expressionP);
924 if (flag_m68k_mri || NUMBERS_WITH_SUFFIX)
926 integer_constant (0, expressionP);
936 input_line_pointer++;
937 floating_constant (expressionP);
938 expressionP->X_add_number = - TOLOWER (c);
942 if (LOCAL_LABELS_DOLLAR)
944 integer_constant (10, expressionP);
953 #ifndef NEED_INDEX_OPERATOR
955 # ifdef md_need_index_operator
956 if (md_need_index_operator())
962 /* Didn't begin with digit & not a name. */
963 if (mode != expr_defer)
964 segment = expression (expressionP);
966 segment = deferred_expression (expressionP);
967 /* expression () will pass trailing whitespace. */
968 if ((c == '(' && *input_line_pointer != ')')
969 || (c == '[' && *input_line_pointer != ']'))
970 as_bad (_("missing '%c'"), c == '(' ? ')' : ']');
972 input_line_pointer++;
974 /* Here with input_line_pointer -> char after "(...)". */
979 if (! flag_m68k_mri || *input_line_pointer != '\'')
981 as_bad (_("EBCDIC constants are not supported"));
984 if (! flag_m68k_mri || *input_line_pointer != '\'')
986 ++input_line_pointer;
992 /* Warning: to conform to other people's assemblers NO
993 ESCAPEMENT is permitted for a single quote. The next
994 character, parity errors and all, is taken as the value
995 of the operand. VERY KINKY. */
996 expressionP->X_op = O_constant;
997 expressionP->X_add_number = *input_line_pointer++;
1001 mri_char_constant (expressionP);
1006 /* Double quote is the bitwise not operator in MRI mode. */
1007 if (! flag_m68k_mri)
1012 /* '~' is permitted to start a label on the Delta. */
1013 if (is_name_beginner (c))
1022 operand (expressionP, mode);
1023 if (expressionP->X_op == O_constant)
1025 /* input_line_pointer -> char after operand. */
1028 expressionP->X_add_number = - expressionP->X_add_number;
1029 /* Notice: '-' may overflow: no warning is given.
1030 This is compatible with other people's
1031 assemblers. Sigh. */
1032 expressionP->X_unsigned = 0;
1034 else if (c == '~' || c == '"')
1035 expressionP->X_add_number = ~ expressionP->X_add_number;
1037 expressionP->X_add_number = ! expressionP->X_add_number;
1039 else if (expressionP->X_op == O_big
1040 && expressionP->X_add_number <= 0
1042 && (generic_floating_point_number.sign == '+'
1043 || generic_floating_point_number.sign == 'P'))
1045 /* Negative flonum (eg, -1.000e0). */
1046 if (generic_floating_point_number.sign == '+')
1047 generic_floating_point_number.sign = '-';
1049 generic_floating_point_number.sign = 'N';
1051 else if (expressionP->X_op == O_big
1052 && expressionP->X_add_number > 0)
1056 if (c == '~' || c == '-')
1058 for (i = 0; i < expressionP->X_add_number; ++i)
1059 generic_bignum[i] = ~generic_bignum[i];
1061 for (i = 0; i < expressionP->X_add_number; ++i)
1063 generic_bignum[i] += 1;
1064 if (generic_bignum[i])
1071 for (i = 0; i < expressionP->X_add_number; ++i)
1073 if (generic_bignum[i])
1075 generic_bignum[i] = 0;
1077 generic_bignum[0] = nonzero;
1080 else if (expressionP->X_op != O_illegal
1081 && expressionP->X_op != O_absent)
1085 expressionP->X_add_symbol = make_expr_symbol (expressionP);
1087 expressionP->X_op = O_uminus;
1088 else if (c == '~' || c == '"')
1089 expressionP->X_op = O_bit_not;
1091 expressionP->X_op = O_logical_not;
1092 expressionP->X_add_number = 0;
1096 as_warn (_("Unary operator %c ignored because bad operand follows"),
1101 #if defined (DOLLAR_DOT) || defined (TC_M68K)
1103 /* '$' is the program counter when in MRI mode, or when
1104 DOLLAR_DOT is defined. */
1106 if (! flag_m68k_mri)
1109 if (DOLLAR_AMBIGU && hex_p (*input_line_pointer))
1111 /* In MRI mode and on Z80, '$' is also used as the prefix
1112 for a hexadecimal constant. */
1113 integer_constant (16, expressionP);
1117 if (is_part_of_name (*input_line_pointer))
1120 current_location (expressionP);
1125 if (!is_part_of_name (*input_line_pointer))
1127 current_location (expressionP);
1130 else if ((strncasecmp (input_line_pointer, "startof.", 8) == 0
1131 && ! is_part_of_name (input_line_pointer[8]))
1132 || (strncasecmp (input_line_pointer, "sizeof.", 7) == 0
1133 && ! is_part_of_name (input_line_pointer[7])))
1137 start = (input_line_pointer[1] == 't'
1138 || input_line_pointer[1] == 'T');
1139 input_line_pointer += start ? 8 : 7;
1141 if (*input_line_pointer != '(')
1142 as_bad (_("syntax error in .startof. or .sizeof."));
1147 ++input_line_pointer;
1149 name = input_line_pointer;
1150 c = get_symbol_end ();
1152 buf = (char *) xmalloc (strlen (name) + 10);
1154 sprintf (buf, ".startof.%s", name);
1156 sprintf (buf, ".sizeof.%s", name);
1157 symbolP = symbol_make (buf);
1160 expressionP->X_op = O_symbol;
1161 expressionP->X_add_symbol = symbolP;
1162 expressionP->X_add_number = 0;
1164 *input_line_pointer = c;
1166 if (*input_line_pointer != ')')
1167 as_bad (_("syntax error in .startof. or .sizeof."));
1169 ++input_line_pointer;
1180 /* Can't imagine any other kind of operand. */
1181 expressionP->X_op = O_absent;
1182 input_line_pointer--;
1187 if (! flag_m68k_mri)
1189 integer_constant (2, expressionP);
1193 if (! flag_m68k_mri)
1195 integer_constant (8, expressionP);
1199 if (! flag_m68k_mri)
1202 /* In MRI mode, this is a floating point constant represented
1203 using hexadecimal digits. */
1205 ++input_line_pointer;
1206 integer_constant (16, expressionP);
1210 if (! flag_m68k_mri || is_part_of_name (*input_line_pointer))
1213 current_location (expressionP);
1218 #if defined(md_need_index_operator) || defined(TC_M68K)
1221 if (is_name_beginner (c)) /* Here if did not begin with a digit. */
1223 /* Identifier begins here.
1224 This is kludged for speed, so code is repeated. */
1226 name = --input_line_pointer;
1227 c = get_symbol_end ();
1231 operatorT operator = md_operator (name, 1, &c);
1236 *input_line_pointer = c;
1240 *input_line_pointer = c;
1244 *input_line_pointer = c;
1248 as_bad (_("invalid use of operator \"%s\""), name);
1253 if (operator != O_absent && operator != O_illegal)
1255 *input_line_pointer = c;
1256 expr (9, expressionP, mode);
1257 expressionP->X_add_symbol = make_expr_symbol (expressionP);
1258 expressionP->X_op_symbol = NULL;
1259 expressionP->X_add_number = 0;
1260 expressionP->X_op = operator;
1266 #ifdef md_parse_name
1267 /* This is a hook for the backend to parse certain names
1268 specially in certain contexts. If a name always has a
1269 specific value, it can often be handled by simply
1270 entering it in the symbol table. */
1271 if (md_parse_name (name, expressionP, mode, &c))
1273 *input_line_pointer = c;
1279 /* The MRI i960 assembler permits
1281 FIXME: This should use md_parse_name. */
1283 && (strcasecmp (name, "sizeof") == 0
1284 || strcasecmp (name, "startof") == 0))
1289 start = (name[1] == 't'
1292 *input_line_pointer = c;
1295 name = input_line_pointer;
1296 c = get_symbol_end ();
1298 buf = (char *) xmalloc (strlen (name) + 10);
1300 sprintf (buf, ".startof.%s", name);
1302 sprintf (buf, ".sizeof.%s", name);
1303 symbolP = symbol_make (buf);
1306 expressionP->X_op = O_symbol;
1307 expressionP->X_add_symbol = symbolP;
1308 expressionP->X_add_number = 0;
1310 *input_line_pointer = c;
1317 symbolP = symbol_find_or_make (name);
1319 /* If we have an absolute symbol or a reg, then we know its
1321 segment = S_GET_SEGMENT (symbolP);
1322 if (mode != expr_defer && segment == absolute_section)
1324 expressionP->X_op = O_constant;
1325 expressionP->X_add_number = S_GET_VALUE (symbolP);
1327 else if (mode != expr_defer && segment == reg_section)
1329 expressionP->X_op = O_register;
1330 expressionP->X_add_number = S_GET_VALUE (symbolP);
1334 expressionP->X_op = O_symbol;
1335 expressionP->X_add_symbol = symbolP;
1336 expressionP->X_add_number = 0;
1338 *input_line_pointer = c;
1342 /* Let the target try to parse it. Success is indicated by changing
1343 the X_op field to something other than O_absent and pointing
1344 input_line_pointer past the expression. If it can't parse the
1345 expression, X_op and input_line_pointer should be unchanged. */
1346 expressionP->X_op = O_absent;
1347 --input_line_pointer;
1348 md_operand (expressionP);
1349 if (expressionP->X_op == O_absent)
1351 ++input_line_pointer;
1352 as_bad (_("bad expression"));
1353 expressionP->X_op = O_constant;
1354 expressionP->X_add_number = 0;
1360 /* It is more 'efficient' to clean up the expressionS when they are
1361 created. Doing it here saves lines of code. */
1362 clean_up_expression (expressionP);
1363 SKIP_WHITESPACE (); /* -> 1st char after operand. */
1364 know (*input_line_pointer != ' ');
1366 /* The PA port needs this information. */
1367 if (expressionP->X_add_symbol)
1368 symbol_mark_used (expressionP->X_add_symbol);
1370 expressionP->X_add_symbol = symbol_clone_if_forward_ref (expressionP->X_add_symbol);
1371 expressionP->X_op_symbol = symbol_clone_if_forward_ref (expressionP->X_op_symbol);
1373 switch (expressionP->X_op)
1376 return absolute_section;
1378 return S_GET_SEGMENT (expressionP->X_add_symbol);
1384 /* Internal. Simplify a struct expression for use by expr (). */
1386 /* In: address of an expressionS.
1387 The X_op field of the expressionS may only take certain values.
1388 Elsewise we waste time special-case testing. Sigh. Ditto SEG_ABSENT.
1390 Out: expressionS may have been modified:
1391 Unused fields zeroed to help expr (). */
1394 clean_up_expression (expressionS *expressionP)
1396 switch (expressionP->X_op)
1400 expressionP->X_add_number = 0;
1405 expressionP->X_add_symbol = NULL;
1410 expressionP->X_op_symbol = NULL;
1417 /* Expression parser. */
1419 /* We allow an empty expression, and just assume (absolute,0) silently.
1420 Unary operators and parenthetical expressions are treated as operands.
1421 As usual, Q==quantity==operand, O==operator, X==expression mnemonics.
1423 We used to do an aho/ullman shift-reduce parser, but the logic got so
1424 warped that I flushed it and wrote a recursive-descent parser instead.
1425 Now things are stable, would anybody like to write a fast parser?
1426 Most expressions are either register (which does not even reach here)
1427 or 1 symbol. Then "symbol+constant" and "symbol-symbol" are common.
1428 So I guess it doesn't really matter how inefficient more complex expressions
1431 After expr(RANK,resultP) input_line_pointer->operator of rank <= RANK.
1432 Also, we have consumed any leading or trailing spaces (operand does that)
1433 and done all intervening operators.
1435 This returns the segment of the result, which will be
1436 absolute_section or the segment of a symbol. */
1439 #define __ O_illegal
1441 #define O_SINGLE_EQ O_illegal
1444 /* Maps ASCII -> operators. */
1445 static const operatorT op_encoding[256] = {
1446 __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __,
1447 __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __,
1449 __, O_bit_or_not, __, __, __, O_modulus, O_bit_and, __,
1450 __, __, O_multiply, O_add, __, O_subtract, __, O_divide,
1451 __, __, __, __, __, __, __, __,
1452 __, __, __, __, O_lt, O_SINGLE_EQ, O_gt, __,
1453 __, __, __, __, __, __, __, __,
1454 __, __, __, __, __, __, __, __,
1455 __, __, __, __, __, __, __, __,
1457 #ifdef NEED_INDEX_OPERATOR
1462 __, __, O_bit_exclusive_or, __,
1463 __, __, __, __, __, __, __, __,
1464 __, __, __, __, __, __, __, __,
1465 __, __, __, __, __, __, __, __,
1466 __, __, __, __, O_bit_inclusive_or, __, __, __,
1468 __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __,
1469 __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __,
1470 __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __,
1471 __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __,
1472 __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __,
1473 __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __,
1474 __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __,
1475 __, __, __, __, __, __, __, __, __, __, __, __, __, __, __, __
1479 0 operand, (expression)
1484 5 used for * / % in MRI mode
1489 static operator_rankT op_rank[O_max] = {
1494 0, /* O_symbol_rva */
1499 9, /* O_logical_not */
1503 8, /* O_left_shift */
1504 8, /* O_right_shift */
1505 7, /* O_bit_inclusive_or */
1506 7, /* O_bit_or_not */
1507 7, /* O_bit_exclusive_or */
1517 3, /* O_logical_and */
1518 2, /* O_logical_or */
1522 /* Unfortunately, in MRI mode for the m68k, multiplication and
1523 division have lower precedence than the bit wise operators. This
1524 function sets the operator precedences correctly for the current
1525 mode. Also, MRI uses a different bit_not operator, and this fixes
1528 #define STANDARD_MUL_PRECEDENCE 8
1529 #define MRI_MUL_PRECEDENCE 6
1532 expr_set_precedence (void)
1536 op_rank[O_multiply] = MRI_MUL_PRECEDENCE;
1537 op_rank[O_divide] = MRI_MUL_PRECEDENCE;
1538 op_rank[O_modulus] = MRI_MUL_PRECEDENCE;
1542 op_rank[O_multiply] = STANDARD_MUL_PRECEDENCE;
1543 op_rank[O_divide] = STANDARD_MUL_PRECEDENCE;
1544 op_rank[O_modulus] = STANDARD_MUL_PRECEDENCE;
1549 expr_set_rank (operatorT operator, operator_rankT rank)
1551 gas_assert (operator >= O_md1 && operator < ARRAY_SIZE (op_rank));
1552 op_rank[operator] = rank;
1555 /* Initialize the expression parser. */
1560 expr_set_precedence ();
1562 /* Verify that X_op field is wide enough. */
1566 gas_assert (e.X_op == O_max);
1570 /* Return the encoding for the operator at INPUT_LINE_POINTER, and
1571 sets NUM_CHARS to the number of characters in the operator.
1572 Does not advance INPUT_LINE_POINTER. */
1574 static inline operatorT
1575 operator (int *num_chars)
1580 c = *input_line_pointer & 0xff;
1583 if (is_end_of_line[c])
1587 if (is_name_beginner (c))
1589 char *name = input_line_pointer;
1590 char c = get_symbol_end ();
1592 ret = md_operator (name, 2, &c);
1596 *input_line_pointer = c;
1597 input_line_pointer = name;
1602 as_bad (_("invalid use of operator \"%s\""), name);
1606 *input_line_pointer = c;
1607 *num_chars = input_line_pointer - name;
1608 input_line_pointer = name;
1617 ret = op_encoding[c];
1619 if (ret == O_illegal)
1621 char *start = input_line_pointer;
1623 ret = md_operator (NULL, 2, NULL);
1624 if (ret != O_illegal)
1625 *num_chars = input_line_pointer - start;
1626 input_line_pointer = start;
1633 return op_encoding[c];
1636 switch (input_line_pointer[1])
1639 return op_encoding[c];
1654 if (input_line_pointer[1] != '=')
1655 return op_encoding[c];
1661 switch (input_line_pointer[1])
1664 return op_encoding[c];
1666 ret = O_right_shift;
1676 switch (input_line_pointer[1])
1679 /* We accept !! as equivalent to ^ for MRI compatibility. */
1681 return O_bit_exclusive_or;
1683 /* We accept != as equivalent to <>. */
1688 return O_bit_inclusive_or;
1689 return op_encoding[c];
1693 if (input_line_pointer[1] != '|')
1694 return op_encoding[c];
1697 return O_logical_or;
1700 if (input_line_pointer[1] != '&')
1701 return op_encoding[c];
1704 return O_logical_and;
1710 /* Parse an expression. */
1713 expr (int rankarg, /* Larger # is higher rank. */
1714 expressionS *resultP, /* Deliver result here. */
1715 enum expr_mode mode /* Controls behavior. */)
1717 operator_rankT rank = (operator_rankT) rankarg;
1724 know (rankarg >= 0);
1726 /* Save the value of dot for the fixup code. */
1728 dot_value = frag_now_fix ();
1730 retval = operand (resultP, mode);
1732 /* operand () gobbles spaces. */
1733 know (*input_line_pointer != ' ');
1735 op_left = operator (&op_chars);
1736 while (op_left != O_illegal && op_rank[(int) op_left] > rank)
1741 input_line_pointer += op_chars; /* -> after operator. */
1743 rightseg = expr (op_rank[(int) op_left], &right, mode);
1744 if (right.X_op == O_absent)
1746 as_warn (_("missing operand; zero assumed"));
1747 right.X_op = O_constant;
1748 right.X_add_number = 0;
1749 right.X_add_symbol = NULL;
1750 right.X_op_symbol = NULL;
1753 know (*input_line_pointer != ' ');
1755 if (op_left == O_index)
1757 if (*input_line_pointer != ']')
1758 as_bad ("missing right bracket");
1761 ++input_line_pointer;
1766 op_right = operator (&op_chars);
1768 know (op_right == O_illegal || op_left == O_index
1769 || op_rank[(int) op_right] <= op_rank[(int) op_left]);
1770 know ((int) op_left >= (int) O_multiply);
1772 know ((int) op_left <= (int) O_index);
1774 know ((int) op_left < (int) O_max);
1777 /* input_line_pointer->after right-hand quantity. */
1778 /* left-hand quantity in resultP. */
1779 /* right-hand quantity in right. */
1780 /* operator in op_left. */
1782 if (resultP->X_op == O_big)
1784 if (resultP->X_add_number > 0)
1785 as_warn (_("left operand is a bignum; integer 0 assumed"));
1787 as_warn (_("left operand is a float; integer 0 assumed"));
1788 resultP->X_op = O_constant;
1789 resultP->X_add_number = 0;
1790 resultP->X_add_symbol = NULL;
1791 resultP->X_op_symbol = NULL;
1793 if (right.X_op == O_big)
1795 if (right.X_add_number > 0)
1796 as_warn (_("right operand is a bignum; integer 0 assumed"));
1798 as_warn (_("right operand is a float; integer 0 assumed"));
1799 right.X_op = O_constant;
1800 right.X_add_number = 0;
1801 right.X_add_symbol = NULL;
1802 right.X_op_symbol = NULL;
1805 /* Optimize common cases. */
1806 #ifdef md_optimize_expr
1807 if (md_optimize_expr (resultP, op_left, &right))
1814 #ifndef md_register_arithmetic
1815 # define md_register_arithmetic 1
1817 if (op_left == O_add && right.X_op == O_constant
1818 && (md_register_arithmetic || resultP->X_op != O_register))
1821 resultP->X_add_number += right.X_add_number;
1823 /* This case comes up in PIC code. */
1824 else if (op_left == O_subtract
1825 && right.X_op == O_symbol
1826 && resultP->X_op == O_symbol
1827 && retval == rightseg
1828 #ifdef md_allow_local_subtract
1829 && md_allow_local_subtract (resultP, & right, rightseg)
1831 && (SEG_NORMAL (rightseg)
1832 || right.X_add_symbol == resultP->X_add_symbol)
1833 && frag_offset_fixed_p (symbol_get_frag (resultP->X_add_symbol),
1834 symbol_get_frag (right.X_add_symbol),
1837 resultP->X_add_number -= right.X_add_number;
1838 resultP->X_add_number -= frag_off / OCTETS_PER_BYTE;
1839 resultP->X_add_number += (S_GET_VALUE (resultP->X_add_symbol)
1840 - S_GET_VALUE (right.X_add_symbol));
1841 resultP->X_op = O_constant;
1842 resultP->X_add_symbol = 0;
1844 else if (op_left == O_subtract && right.X_op == O_constant
1845 && (md_register_arithmetic || resultP->X_op != O_register))
1848 resultP->X_add_number -= right.X_add_number;
1850 else if (op_left == O_add && resultP->X_op == O_constant
1851 && (md_register_arithmetic || right.X_op != O_register))
1854 resultP->X_op = right.X_op;
1855 resultP->X_add_symbol = right.X_add_symbol;
1856 resultP->X_op_symbol = right.X_op_symbol;
1857 resultP->X_add_number += right.X_add_number;
1860 else if (resultP->X_op == O_constant && right.X_op == O_constant)
1862 /* Constant OP constant. */
1863 offsetT v = right.X_add_number;
1864 if (v == 0 && (op_left == O_divide || op_left == O_modulus))
1866 as_warn (_("division by zero"));
1869 if ((valueT) v >= sizeof(valueT) * CHAR_BIT
1870 && (op_left == O_left_shift || op_left == O_right_shift))
1872 as_warn_value_out_of_range (_("shift count"), v, 0,
1873 sizeof(valueT) * CHAR_BIT - 1,
1875 resultP->X_add_number = v = 0;
1879 default: goto general;
1880 case O_multiply: resultP->X_add_number *= v; break;
1881 case O_divide: resultP->X_add_number /= v; break;
1882 case O_modulus: resultP->X_add_number %= v; break;
1883 case O_left_shift: resultP->X_add_number <<= v; break;
1885 /* We always use unsigned shifts, to avoid relying on
1886 characteristics of the compiler used to compile gas. */
1887 resultP->X_add_number =
1888 (offsetT) ((valueT) resultP->X_add_number >> (valueT) v);
1890 case O_bit_inclusive_or: resultP->X_add_number |= v; break;
1891 case O_bit_or_not: resultP->X_add_number |= ~v; break;
1892 case O_bit_exclusive_or: resultP->X_add_number ^= v; break;
1893 case O_bit_and: resultP->X_add_number &= v; break;
1894 /* Constant + constant (O_add) is handled by the
1895 previous if statement for constant + X, so is omitted
1897 case O_subtract: resultP->X_add_number -= v; break;
1899 resultP->X_add_number =
1900 resultP->X_add_number == v ? ~ (offsetT) 0 : 0;
1903 resultP->X_add_number =
1904 resultP->X_add_number != v ? ~ (offsetT) 0 : 0;
1907 resultP->X_add_number =
1908 resultP->X_add_number < v ? ~ (offsetT) 0 : 0;
1911 resultP->X_add_number =
1912 resultP->X_add_number <= v ? ~ (offsetT) 0 : 0;
1915 resultP->X_add_number =
1916 resultP->X_add_number >= v ? ~ (offsetT) 0 : 0;
1919 resultP->X_add_number =
1920 resultP->X_add_number > v ? ~ (offsetT) 0 : 0;
1923 resultP->X_add_number = resultP->X_add_number && v;
1926 resultP->X_add_number = resultP->X_add_number || v;
1930 else if (resultP->X_op == O_symbol
1931 && right.X_op == O_symbol
1932 && (op_left == O_add
1933 || op_left == O_subtract
1934 || (resultP->X_add_number == 0
1935 && right.X_add_number == 0)))
1937 /* Symbol OP symbol. */
1938 resultP->X_op = op_left;
1939 resultP->X_op_symbol = right.X_add_symbol;
1940 if (op_left == O_add)
1941 resultP->X_add_number += right.X_add_number;
1942 else if (op_left == O_subtract)
1944 resultP->X_add_number -= right.X_add_number;
1945 if (retval == rightseg && SEG_NORMAL (retval))
1947 retval = absolute_section;
1948 rightseg = absolute_section;
1955 /* The general case. */
1956 resultP->X_add_symbol = make_expr_symbol (resultP);
1957 resultP->X_op_symbol = make_expr_symbol (&right);
1958 resultP->X_op = op_left;
1959 resultP->X_add_number = 0;
1960 resultP->X_unsigned = 1;
1963 if (retval != rightseg)
1965 if (! SEG_NORMAL (retval))
1967 if (retval != undefined_section || SEG_NORMAL (rightseg))
1970 else if (SEG_NORMAL (rightseg)
1972 && op_left != O_subtract
1975 as_bad (_("operation combines symbols in different segments"));
1979 } /* While next operator is >= this rank. */
1981 /* The PA port needs this information. */
1982 if (resultP->X_add_symbol)
1983 symbol_mark_used (resultP->X_add_symbol);
1985 if (rank == 0 && mode == expr_evaluate)
1986 resolve_expression (resultP);
1988 return resultP->X_op == O_constant ? absolute_section : retval;
1991 /* Resolve an expression without changing any symbols/sub-expressions
1995 resolve_expression (expressionS *expressionP)
1997 /* Help out with CSE. */
1998 valueT final_val = expressionP->X_add_number;
1999 symbolS *add_symbol = expressionP->X_add_symbol;
2000 symbolS *op_symbol = expressionP->X_op_symbol;
2001 operatorT op = expressionP->X_op;
2003 segT seg_left, seg_right;
2004 fragS *frag_left, *frag_right;
2019 if (!snapshot_symbol (&add_symbol, &left, &seg_left, &frag_left))
2027 if (!snapshot_symbol (&add_symbol, &left, &seg_left, &frag_left))
2030 if (seg_left != absolute_section)
2033 if (op == O_logical_not)
2035 else if (op == O_uminus)
2047 case O_bit_inclusive_or:
2049 case O_bit_exclusive_or:
2061 if (!snapshot_symbol (&add_symbol, &left, &seg_left, &frag_left)
2062 || !snapshot_symbol (&op_symbol, &right, &seg_right, &frag_right))
2065 /* Simplify addition or subtraction of a constant by folding the
2066 constant into X_add_number. */
2069 if (seg_right == absolute_section)
2075 else if (seg_left == absolute_section)
2079 seg_left = seg_right;
2080 add_symbol = op_symbol;
2085 else if (op == O_subtract)
2087 if (seg_right == absolute_section)
2095 /* Equality and non-equality tests are permitted on anything.
2096 Subtraction, and other comparison operators are permitted if
2097 both operands are in the same section.
2098 Shifts by constant zero are permitted on anything.
2099 Multiplies, bit-ors, and bit-ands with constant zero are
2100 permitted on anything.
2101 Multiplies and divides by constant one are permitted on
2103 Binary operations with both operands being the same register
2104 or undefined symbol are permitted if the result doesn't depend
2106 Otherwise, both operands must be absolute. We already handled
2107 the case of addition or subtraction of a constant above. */
2109 if (!(seg_left == absolute_section
2110 && seg_right == absolute_section)
2111 && !(op == O_eq || op == O_ne)
2112 && !((op == O_subtract
2113 || op == O_lt || op == O_le || op == O_ge || op == O_gt)
2114 && seg_left == seg_right
2116 || frag_offset_fixed_p (frag_left, frag_right, &frag_off))
2117 && (seg_left != reg_section || left == right)
2118 && (seg_left != undefined_section || add_symbol == op_symbol)))
2120 if ((seg_left == absolute_section && left == 0)
2121 || (seg_right == absolute_section && right == 0))
2123 if (op == O_bit_exclusive_or || op == O_bit_inclusive_or)
2125 if (seg_right != absolute_section || right != 0)
2127 seg_left = seg_right;
2129 add_symbol = op_symbol;
2134 else if (op == O_left_shift || op == O_right_shift)
2136 if (seg_left != absolute_section || left != 0)
2142 else if (op != O_multiply
2143 && op != O_bit_or_not && op != O_bit_and)
2146 else if (op == O_multiply
2147 && seg_left == absolute_section && left == 1)
2149 seg_left = seg_right;
2151 add_symbol = op_symbol;
2155 else if ((op == O_multiply || op == O_divide)
2156 && seg_right == absolute_section && right == 1)
2161 else if (left != right
2162 || ((seg_left != reg_section || seg_right != reg_section)
2163 && (seg_left != undefined_section
2164 || seg_right != undefined_section
2165 || add_symbol != op_symbol)))
2167 else if (op == O_bit_and || op == O_bit_inclusive_or)
2172 else if (op != O_bit_exclusive_or && op != O_bit_or_not)
2176 right += frag_off / OCTETS_PER_BYTE;
2179 case O_add: left += right; break;
2180 case O_subtract: left -= right; break;
2181 case O_multiply: left *= right; break;
2185 left = (offsetT) left / (offsetT) right;
2190 left = (offsetT) left % (offsetT) right;
2192 case O_left_shift: left <<= right; break;
2193 case O_right_shift: left >>= right; break;
2194 case O_bit_inclusive_or: left |= right; break;
2195 case O_bit_or_not: left |= ~right; break;
2196 case O_bit_exclusive_or: left ^= right; break;
2197 case O_bit_and: left &= right; break;
2200 left = (left == right
2201 && seg_left == seg_right
2202 && (finalize_syms || frag_left == frag_right)
2203 && (seg_left != undefined_section
2204 || add_symbol == op_symbol)
2205 ? ~ (valueT) 0 : 0);
2210 left = (offsetT) left < (offsetT) right ? ~ (valueT) 0 : 0;
2213 left = (offsetT) left <= (offsetT) right ? ~ (valueT) 0 : 0;
2216 left = (offsetT) left >= (offsetT) right ? ~ (valueT) 0 : 0;
2219 left = (offsetT) left > (offsetT) right ? ~ (valueT) 0 : 0;
2221 case O_logical_and: left = left && right; break;
2222 case O_logical_or: left = left || right; break;
2232 if (seg_left == absolute_section)
2234 else if (seg_left == reg_section && final_val == 0)
2236 else if (add_symbol != expressionP->X_add_symbol)
2238 expressionP->X_add_symbol = add_symbol;
2240 expressionP->X_op = op;
2242 if (op == O_constant || op == O_register)
2244 expressionP->X_add_number = final_val;
2249 /* This lives here because it belongs equally in expr.c & read.c.
2250 expr.c is just a branch office read.c anyway, and putting it
2251 here lessens the crowd at read.c.
2253 Assume input_line_pointer is at start of symbol name.
2254 Advance input_line_pointer past symbol name.
2255 Turn that character into a '\0', returning its former value.
2256 This allows a string compare (RMS wants symbol names to be strings)
2258 There will always be a char following symbol name, because all good
2259 lines end in end-of-line. */
2262 get_symbol_end (void)
2266 /* We accept \001 in a name in case this is being called with a
2267 constructed string. */
2268 if (is_name_beginner (c = *input_line_pointer++) || c == '\001')
2270 while (is_part_of_name (c = *input_line_pointer++)
2273 if (is_name_ender (c))
2274 c = *input_line_pointer++;
2276 *--input_line_pointer = 0;
2281 get_single_number (void)
2284 operand (&exp, expr_normal);
2285 return exp.X_add_number;