Add support for the WebAssembly file format and the wasm32 ELF conversion to gas...
[external/binutils.git] / gas / NEWS
1 -*- text -*-
2
3 * Add support for the WebAssembly file format and wasm32 ELF conversion.
4
5 * PowerPC gas now checks that the correct register class is used in
6   instructions.  For instance, "addi %f4,%cr3,%r31" warns three times
7   that the registers are invalid.
8
9 * Add support for the Texas Instruments PRU processor.
10
11 Changes in 2.28:
12
13 * Add support for the RISC-V architecture.
14
15 * Add support for the ARM Cortex-M23 and Cortex-M33 processors.
16
17 Changes in 2.27:
18
19 * Default to --enable-compressed-debug-sections=gas for Linux/x86 targets.
20
21 * Add --no-pad-sections to stop the assembler from padding the end of output
22   sections up to their alignment boundary.
23
24 * Support for the ARMv8-M architecture has been added to the ARM port.  Support
25   for the ARMv8-M Security and DSP Extensions has also been added to the ARM
26   port.
27
28 * ARC backend accepts .extInstruction, .extCondCode, .extAuxRegister, and
29   .extCoreRegister pseudo-ops that allow an user to define custom
30   instructions, conditional codes, auxiliary and core registers.
31
32 * Add a configure option --enable-elf-stt-common to decide whether ELF
33   assembler should generate common symbols with the STT_COMMON type by
34   default.  Default to no.
35
36 * New command line option --elf-stt-common= for ELF targets to control
37   whether to generate common symbols with the STT_COMMON type.
38
39 * Add ability to set section flags and types via numeric values for ELF
40   based targets.
41
42 * Add a configure option --enable-x86-relax-relocations to decide whether
43   x86 assembler should generate relax relocations by default.  Default to
44   yes, except for x86 Solaris targets older than Solaris 12.
45
46 * New command line option -mrelax-relocations= for x86 target to control
47   whether to generate relax relocations.
48
49 * New command line option -mfence-as-lock-add=yes for x86 target to encode
50   lfence, mfence and sfence as "lock addl $0x0, (%[re]sp)".
51
52 * Add assembly-time relaxation option for ARC cpus.
53
54 * Add --with-cpu=TYPE configure option for ARC gas.  This allows the default
55   cpu type to be adjusted at configure time.
56
57 Changes in 2.26:
58
59 * Add a configure option --enable-compressed-debug-sections={all,gas} to
60   decide whether DWARF debug sections should be compressed by default.
61
62 * Add support for the ARC EM/HS, and ARC600/700 architectures.  Remove
63   assembler support for Argonaut RISC architectures.
64
65 * Symbol and label names can now be enclosed in double quotes (") which allows
66   them to contain characters that are not part of valid symbol names in high
67   level languages.
68
69 * Added the correctly spelled -march=armv6kz, for ARMv6KZ support.  The
70   previous spelling, -march=armv6zk, is still accepted.
71
72 * Support for the ARMv8.1 architecture has been added to the Aarch64 port.
73   Support for the individual ARMv8.1 Adv.SIMD, LOR and PAN architecture
74   extensions has also been added to the Aarch64 port.
75
76 * Support for the ARMv8.1 architecture has been added to the ARM port.  Support
77   for the individual ARMv8.1 Adv.SIMD and PAN architecture extensions has also
78   been added to the ARM port.
79
80 * Extend --compress-debug-sections option to support
81   --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi] for ELF
82   targets.
83
84 * --compress-debug-sections is turned on for Linux/x86 by default.
85
86 Changes in 2.25:
87
88 * Add support for the AVR Tiny microcontrollers.
89
90 * Replace support for openrisc and or32 with support for or1k.
91
92 * Enhanced the ARM port to accept the assembler output from the CodeComposer
93   Studio tool.  Support is enabled via the new command line option -mccs.
94
95 * Add support for the Andes NDS32.
96
97 Changes in 2.24:
98
99 * Add support for the Texas Instruments MSP430X processor.
100
101 * Add -gdwarf-sections command line option to enable per-code-section
102   generation of DWARF .debug_line sections.
103
104 * Add support for Altera Nios II.
105
106 * Add support for the Imagination Technologies Meta processor.
107
108 * Add support for the v850e3v5.
109
110 * Remove assembler support for MIPS ECOFF targets.
111
112 Changes in 2.23:
113
114 * Add support for the 64-bit ARM architecture: AArch64.
115
116 * Add support for S12X processor.
117
118 * Add support for the VLE extension to the PowerPC architecture.
119
120 * Add support for the Freescale XGATE architecture.
121
122 * Add support for .bundle_align_mode, .bundle_lock, and .bundle_unlock
123   directives.  These are currently available only for x86 and ARM targets.
124
125 * Add support for the Renesas RL78 architecture.
126
127 * Add support for the Adapteva EPIPHANY architecture.
128
129 * For x86, allow 'rep bsf', 'rep bsr', and 'rep ret' syntax.
130
131 Changes in 2.22:
132
133 * Add support for the Tilera TILEPro and TILE-Gx architectures.
134
135 Changes in 2.21:
136
137 * Gas no longer requires doubling of ampersands in macros.
138
139 * Add support for the TMS320C6000 (TI C6X) processor family.
140
141 * GAS now understands an extended syntax in the .section directive flags
142   for COFF targets that allows the section's alignment to be specified.  This
143   feature has also been backported to the 2.20 release series, starting with
144   2.20.1.
145
146 * Add support for the Renesas RX processor.
147
148 * New command line option, --compress-debug-sections, which requests
149   compression of DWARF debug information sections in the relocatable output
150   file.  Compressed debug sections are supported by readelf, objdump, and
151   gold, but not currently by Gnu ld.
152
153 Changes in 2.20:
154
155 * Added support for v850e2 and v850e2v3.
156
157 * GNU/Linux targets now supports "gnu_unique_object" as a value in the .type
158   pseudo op.  It marks the symbol as being globally unique in the entire
159   process.
160
161 * ARM assembler now supports .inst[.nw] pseudo-ops to insert opcodes specified
162   in binary rather than text.
163
164 * Add support for common symbol alignment to PE formats.
165
166 * Add support for the new discriminator column in the DWARF line table,
167   with a discriminator operand for the .loc directive.
168
169 * Add support for Sunplus score architecture.
170
171 * The .type pseudo-op now accepts a type of STT_GNU_IFUNC which can be used to
172   indicate that if the symbol is the target of a relocation, its value should
173   not be use.  Instead the function should be invoked and its result used as
174   the value.
175
176 * Add support for Lattice Mico32 (lm32) architecture.
177
178 * Add support for Xilinx MicroBlaze architecture.
179
180 Changes in 2.19:
181
182 * New pseudo op .cfi_val_encoded_addr, to record constant addresses in unwind
183   tables without runtime relocation.
184
185 * New command line option, -h-tick-hex, for sh, m32c, and h8/300 targets, which
186   adds compatibility with H'00 style hex constants.
187
188 * New command line option, -msse-check=[none|error|warning], for x86
189   targets.
190
191 * New sub-option added to the assembler's -a command line switch to
192   generate a listing output.  The 'g' sub-option will insert into the listing
193   various information about the assembly, such as assembler version, the
194   command line options used, and a time stamp.
195
196 * New command line option -msse2avx for x86 target to encode SSE
197   instructions with VEX prefix.
198
199 * Add Intel XSAVE, EPT, MOVBE, AES, PCLMUL, AVX/FMA support for x86 target.
200
201 * New command line options, -march=CPU[,+EXTENSION...], -mtune=CPU,
202   -mmnemonic=[att|intel], -msyntax=[att|intel], -mindex-reg,
203   -mnaked-reg and -mold-gcc, for x86 targets.
204
205 * Support for generating wide character strings has been added via the new
206   pseudo ops: .string16, .string32 and .string64.
207
208 * Support for SSE5 has been added to the i386 port.
209
210 Changes in 2.18:
211
212 * The GAS sources are now released under the GPLv3.
213
214 * Support for the National Semiconductor CR16 target has been added.
215
216 * Added gas .reloc pseudo.  This is a low-level interface for creating
217   relocations.
218
219 * Add support for x86_64 PE+ target.
220
221 * Add support for Score target.
222
223 Changes in 2.17:
224
225 * Support for the Infineon XC16X has been added by KPIT Cummins Infosystems.
226
227 * Support for ms2 architecture has been added.
228
229 * Support for the Z80 processor family has been added.
230
231 * Add support for the "@<file>" syntax to the command line, so that extra
232   switches can be read from <file>.
233
234 * The SH target supports a new command line switch --enable-reg-prefix which,
235   if enabled, will allow register names to be optionally prefixed with a $
236   character.  This allows register names to be distinguished from label names.
237
238 * Macros with a variable number of arguments are now supported. See the
239   documentation for how this works.
240
241 * Added --reduce-memory-overheads switch to reduce the size of the hash
242   tables used, at the expense of longer assembly times, and
243   --hash-size=<NUMBER> to set the size of the hash tables used by gas.
244
245 * Macro names and macro parameter names can now be any identifier that would
246   also be legal as a symbol elsewhere. For macro parameter names, this is
247   known to cause problems in certain sources when the respective target uses
248   characters inconsistently, and thus macro parameter references may no longer
249   be recognized as such (see the documentation for details).
250
251 * Support the .f_floating, .d_floating, .g_floating and .h_floating directives
252   for the VAX target in order to be more compatible with the VAX MACRO
253   assembler.
254
255 * New command line option -mtune=[itanium1|itanium2] for IA64 targets.
256
257 Changes in 2.16:
258
259 * Redefinition of macros now results in an error.
260
261 * New command line option -mhint.b=[ok|warning|error] for IA64 targets.
262
263 * New command line option -munwind-check=[warning|error] for IA64
264   targets.
265
266 * The IA64 port now uses automatic dependency violation removal as its default
267   mode.
268
269 * Port to MAXQ processor contributed by HCL Tech.
270
271 * Added support for generating unwind tables for ARM ELF targets.
272
273 * Add a -g command line option to generate debug information in the target's
274   preferred debug format.
275
276 * Support for the crx-elf target added.
277
278 * Support for the sh-symbianelf target added.
279
280 * Added a pseudo-op (.secrel32) to generate 32 bit section relative relocations
281   on pe[i]-i386; required for this target's DWARF 2 support.
282
283 * Support for Motorola MCF521x/5249/547x/548x added.
284
285 * Support for ColdFire EMAC instructions added and Motorola syntax for MAC/EMAC
286   instrucitons.
287
288 * New command line option -mno-shared for MIPS ELF targets.
289
290 * New command line option --alternate and pseudo-ops .altmacro and .noaltmacro
291   added to enter (and leave) alternate macro syntax mode.
292
293 Changes in 2.15:
294
295 * The MIPS -membedded-pic option (Embedded-PIC code generation) is
296   deprecated and will be removed in a future release.
297
298 * Added PIC m32r Linux (ELF) and support to M32R assembler.
299
300 * Added support for ARM V6.
301
302 * Added support for sh4a and variants.
303
304 * Support for Renesas M32R2 added.
305
306 * Limited support for Mapping Symbols as specified in the ARM ELF
307   specification has been added to the arm assembler.
308
309 * On ARM architectures, added a new gas directive ".unreq" that undoes
310   definitions created by ".req".
311
312 * Support for Motorola ColdFire MCF528x added.
313
314 * Added --gstabs+ switch to enable the generation of STABS debug format
315   information with GNU extensions.
316
317 * Added support for MIPS64 Release 2.
318
319 * Added support for v850e1.
320
321 * Added -n switch for x86 assembler.  By default, x86 GAS replaces
322   multiple nop instructions used for alignment within code sections
323   with multi-byte nop instructions such as leal 0(%esi,1),%esi.  This
324   switch disables the optimization.
325
326 * Removed -n option from MIPS assembler.  It was not useful, and confused the
327   existing -non_shared option.
328
329 Changes in 2.14:
330
331 * Added support for MIPS32 Release 2.
332
333 * Added support for Xtensa architecture.
334
335 * Support for Intel's iWMMXt processor (an ARM variant) added.
336
337 * An assembler test generator has been contributed and an example file that
338   uses it (gas/testsuite/gas/all/test-gen.c and test-exmaple.c).
339
340 * Support for SH2E added.
341
342 * GASP has now been removed.
343
344 * Support for Texas Instruments TMS320C4x and TMS320C3x series of
345   DSP's contributed by Michael Hayes and Svein E. Seldal.
346
347 * Support for the Ubicom IP2xxx microcontroller added.
348
349 Changes in 2.13:
350
351 * Support for the Fujitsu FRV architecture added by Red Hat. Models for FR400
352   and FR500 included.
353
354 * Support for DLX processor added.
355
356 * GASP has now been deprecated and will be removed in a future release.  Use
357   the macro facilities in GAS instead.
358
359 * GASP now correctly parses floating point numbers. Unless the base is
360   explicitly specified, they are interpreted as decimal numbers regardless of
361   the currently specified base.
362
363 Changes in 2.12:
364
365 * Support for Don Knuth's MMIX, by Hans-Peter Nilsson.
366
367 * Support for the OpenRISC 32-bit embedded processor by OpenCores.
368
369 * The ARM assembler now accepts -march=..., -mcpu=... and -mfpu=... for
370   specifying the target instruction set.  The old method of specifying the
371   target processor has been deprecated, but is still accepted for
372   compatibility.
373
374 * Support for the VFP floating-point instruction set has been added to
375   the ARM assembler.
376
377 * New psuedo op: .incbin to include a set of binary data at a given point
378   in the assembly.  Contributed by Anders Norlander.
379
380 * The MIPS assembler now accepts -march/-mtune. -mcpu has been deprecated
381   but still works for compatability.
382
383 * The MIPS assembler no longer issues a warning by default when it
384   generates a nop instruction from a macro. The new command line option
385   -n will turn on the warning.
386
387 Changes in 2.11:
388
389 * Support for PDP-11 and 2.11BSD a.out format, by Lars Brinkhoff.
390
391 * x86 gas now supports the full Pentium4 instruction set.
392
393 * Support for AMD x86-64 architecture, by Jan Hubicka, SuSE Labs.
394
395 * Support for Motorola 68HC11 and 68HC12.
396
397 * Support for Texas Instruments TMS320C54x (tic54x).
398
399 * Support for IA-64.
400
401 * Support for i860, by Jason Eckhardt.
402
403 * Support for CRIS (Axis Communications ETRAX series).
404
405 * x86 gas has a new .arch pseudo op to specify the target CPU architecture.
406
407 * x86 gas -q command line option quietens warnings about register size changes
408   due to suffix, indirect jmp/call without `*', stand-alone prefixes, and
409   translating various deprecated floating point instructions.
410
411 Changes in 2.10:
412
413 * Support for the ARM msr instruction was changed to only allow an immediate
414   operand when altering the flags field.
415
416 * Support for ATMEL AVR.
417
418 * Support for IBM 370 ELF.  Somewhat experimental.
419
420 * Support for numbers with suffixes.
421
422 * Added support for breaking to the end of repeat loops.
423
424 * Added support for parallel instruction syntax (DOUBLEBAR_PARALLEL).
425
426 * New .elseif pseudo-op added.
427
428 * New --fatal-warnings option.
429
430 * picoJava architecture support added.
431
432 * Motorola MCore 210 processor support added.
433
434 * A new pseudo-op .intel_syntax has been implemented to allow gas to parse i386
435   assembly programs with intel syntax.
436
437 * New pseudo-ops .func,.endfunc to aid in debugging user-written assembler code.
438
439 * Added -gdwarf2 option to generate DWARF 2 debugging information.
440
441 * Full 16-bit mode support for i386.
442
443 * Greatly improved instruction operand checking for i386.  This change will
444   produce errors or warnings on incorrect assembly code that previous versions
445   of gas accepted.  If you get unexpected messages from code that worked with
446   older versions of gas, please double check the code before reporting a bug.
447
448 * Weak symbol support added for COFF targets.
449
450 * Mitsubishi D30V support added.
451
452 * Texas Instruments c80 (tms320c80) support added.
453
454 * i960 ELF support added.
455
456 * ARM ELF support added.
457
458 Changes in 2.9:
459
460 * Texas Instruments c30 (tms320c30) support added.
461
462 * The assembler now optimizes the exception frame information generated by egcs
463   and gcc 2.8.  The new --traditional-format option disables this optimization.
464
465 * Added --gstabs option to generate stabs debugging information.
466
467 * The -a option takes a new suboption, m (e.g., -alm) to expand macros in a
468   listing.
469
470 * Added -MD option to print dependencies.
471
472 Changes in 2.8:
473
474 * BeOS support added.
475
476 * MIPS16 support added.
477
478 * Motorola ColdFire 5200 support added (configure for m68k and use -m5200).
479
480 * Alpha/VMS support added.
481
482 * m68k options --base-size-default-16, --base-size-default-32,
483   --disp-size-default-16, and --disp-size-default-32 added.
484
485 * The alignment directives now take an optional third argument, which is the
486   maximum number of bytes to skip.  If doing the alignment would require
487   skipping more than the given number of bytes, the alignment is not done at
488   all.
489
490 * The ELF assembler has a new pseudo-op, .symver, used for symbol versioning.
491
492 * The -a option takes a new suboption, c (e.g., -alc), to skip false
493   conditionals in listings.
494
495 * Added new pseudo-op, .equiv; it's like .equ, except that it is an error if
496   the symbol is already defined.
497
498 Changes in 2.7:
499
500 * The PowerPC assembler now allows the use of symbolic register names (r0,
501   etc.) if -mregnames is used.  Symbolic names preceded by a '%' (%r0, etc.)
502   can be used any time.  PowerPC 860 move to/from SPR instructions have been
503   added.
504
505 * Alpha Linux (ELF) support added.
506
507 * PowerPC ELF support added.
508
509 * m68k Linux (ELF) support added.
510
511 * i960 Hx/Jx support added.
512
513 * i386/PowerPC gnu-win32 support added.
514
515 * SCO ELF support added.  For OpenServer 5 targets (i386-unknown-sco3.2v5) the
516   default is to build COFF-only support.  To get a set of tools that generate
517   ELF (they'll understand both COFF and ELF), you must configure with
518   target=i386-unknown-sco3.2v5elf.
519
520 * m88k-motorola-sysv3* support added.
521
522 Changes in 2.6:
523
524 * Gas now directly supports macros, without requiring GASP.
525
526 * Gas now has an MRI assembler compatibility mode.  Use -M or --mri to select
527   MRI mode.  The pseudo-op ``.mri 1'' will switch into the MRI mode until the
528   ``.mri 0'' is seen; this can be convenient for inline assembler code.
529
530 * Added --defsym SYM=VALUE option.
531
532 * Added -mips4 support to MIPS assembler.
533
534 * Added PIC support to Solaris and SPARC SunOS 4 assembler.
535
536 Changes in 2.4:
537
538 * Converted this directory to use an autoconf-generated configure script.
539
540 * ARM support, from Richard Earnshaw.
541
542 * Updated VMS support, from Pat Rankin, including considerably improved
543   debugging support.
544
545 * Support for the control registers in the 68060.
546
547 * Handles (ignores) a new directive ".this_GCC_requires_the_GNU_assembler", to
548   provide for possible future gcc changes, for targets where gas provides some
549   features not available in the native assembler.  If the native assembler is
550   used, it should become obvious pretty quickly what the problem is.
551
552 * Usage message is available with "--help".
553
554 * The GNU Assembler Preprocessor (gasp) is included.  (Actually, it was in 2.3
555   also, but didn't get into the NEWS file.)
556
557 * Weak symbol support for a.out.
558
559 * A bug in the listing code which could cause an infinite loop has been fixed.
560   Bugs in listings when generating a COFF object file have also been fixed.
561
562 * Initial i386-svr4 PIC implementation from Eric Youngdale, based on code by
563   Paul Kranenburg.
564
565 * Improved Alpha support.  Immediate constants can have a much larger range
566   now. Support for the 21164 has been contributed by Digital.
567
568 * Updated ns32k (pc532-mach, netbsd532) support from Ian Dall.
569
570 Changes in 2.3:
571
572 * Mach i386 support, by David Mackenzie and Ken Raeburn.
573
574 * RS/6000 and PowerPC support by Ian Taylor.
575
576 * VMS command scripts (make-gas.com, config-gas.com) have been worked on a bit,
577   based on mail received from various people.  The `-h#' option should work
578   again too.
579
580 * HP-PA work, by Jeff Law.  Note, for the PA, gas-2.3 has been designed to work
581   with gdb-4.12 and gcc-2.6.  As gcc-2.6 has not been released yet, a special
582   version of gcc-2.5.8 has been patched to work with gas-2.3.  You can retrieve
583   this special version of gcc-2.5.8 via anonymous ftp from jaguar.cs.utah.edu
584   in the "dist" directory.
585
586 * Vax support in gas fixed for BSD, so it builds and seems to run a couple
587   simple tests okay.  I haven't put it through extensive testing.  (GNU make is
588   currently required for BSD 4.3 builds.)
589
590 * Support for the DEC Alpha, running OSF/1 (ECOFF format).  The gas support is
591   based on code donated by CMU, which used an a.out-based format.  I'm afraid
592   the alpha-a.out support is pretty badly mangled, and much of it removed;
593   making it work will require rewriting it as BFD support for the format anyways.
594
595 * Irix 5 support.
596
597 * The test suites have been fixed up a bit, so that they should work with a
598   couple different versions of expect and dejagnu.
599
600 * Symbols' values are now handled internally as expressions, permitting more
601   flexibility in evaluating them in some cases.  Some details of relocation
602   handling have also changed, and simple constant pool management has been
603   added, to make the Alpha port easier.
604
605 * New option "--statistics" for printing out program run times.  This is
606   intended to be used with the gcc "-Q" option, which prints out times spent in
607   various phases of compilation.  (You should be able to get all of them
608   printed out with "gcc -Q -Wa,--statistics", I think.)
609
610 Changes in 2.2:
611
612 * RS/6000 AIX and MIPS SGI Irix 5 support has been added.
613
614 * Configurations that are still in development (and therefore are convenient to
615   have listed in configure.in) still get rejected without a minor change to
616   gas/Makefile.in, so people not doing development work shouldn't get the
617   impression that support for such configurations is actually believed to be
618   reliable.
619
620 * The program name (usually "as") is printed when a fatal error message is
621   displayed.  This should prevent some confusion about the source of occasional
622   messages about "internal errors".
623
624 * ELF support is falling into place.  Support for the 386 should be working.
625   Support for SPARC Solaris is in.  HPPA support from Utah is being integrated.
626
627 * Symbol values are maintained as expressions instead of being immediately
628   boiled down to add-symbol, sub-symbol, and constant.  This permits slightly
629   more complex calculations involving symbols whose values are not alreadey
630   known.
631
632 * DBX-style debugging info ("stabs") is now supported for COFF formats.
633   If any stabs directives are seen in the source, GAS will create two new
634   sections: a ".stab" and a ".stabstr" section.  The format of the .stab
635   section is nearly identical to the a.out symbol format, and .stabstr is
636   its string table.  For this to be useful, you must have configured GCC
637   to generate stabs (by defining DBX_DEBUGGING_INFO), and must have a GDB
638   that can use the stab sections (4.11 or later).
639
640 * LynxOS, on i386 and m68k platforms, is now supported.  SPARC LynxOS
641   support is in progress.
642
643 Changes in 2.1:
644
645 * Several small fixes for i386-aix (PS/2) support from Minh Tran-Le have been
646   incorporated, but not well tested yet.
647
648 * Altered the opcode table split for m68k; it should require less VM to compile
649   with gcc now.
650
651 * Some minor adjustments to add (Convergent Technologies') Miniframe support,
652   suggested by Ronald Cole.
653
654 * HPPA support (running OSF only, not HPUX) has been contributed by Utah.  This
655   includes improved ELF support, which I've started adapting for SPARC Solaris
656   2.x.  Integration isn't completely, so it probably won't work.
657
658 * HP9000/300 support, donated by HP, has been merged in.
659
660 * Ian Taylor has finished the MIPS ECOFF (Ultrix, Irix) support.
661
662 * Better error messages for unsupported configurations (e.g., hppa-hpux).
663
664 * Test suite framework is starting to become reasonable.
665
666 Changes in 2.0:
667
668 * Mostly bug fixes.
669
670 * Some more merging of BFD and ELF code, but ELF still doesn't work.
671
672 Changes in 1.94:
673
674 * BFD merge is partly done.  Adventurous souls may try giving configure the
675   "--with-bfd-assembler" option.  Currently, ELF format requires it, a.out
676   format accepts it; SPARC CPU accepts it.  It's the default only for OS "elf"
677   or "solaris".  (ELF isn't really supported yet.  It needs work.  I've got
678   some code from Utah for HP-PA ELF, and from DG for m88k ELF, but they're not
679   fully merged yet.)
680
681 * The 68K opcode table has been split in half.  It should now compile under gcc
682   without consuming ridiculous amounts of memory.
683
684 * A couple data structures have been reduced in size.  This should result in
685   saving a little bit of space at runtime.
686
687 * Support for MIPS, from OSF and Ralph Campbell, has been merged in.  The OSF
688   code provided ROSE format support, which I haven't merged in yet.  (I can
689   make it available, if anyone wants to try it out.)  Ralph's code, for BSD
690   4.4, supports a.out format.  We don't have ECOFF support in just yet; it's
691   coming.
692
693 * Support for the Hitachi H8/500 has been added.
694
695 * VMS host and target support should be working now, thanks chiefly to Eric
696   Youngdale.
697
698 Changes in 1.93.01:
699
700 * For m68k, support for more processors has been added: 68040, CPU32, 68851.
701
702 * For i386, .align is now power-of-two; was number-of-bytes.
703
704 * For m68k, "%" is now accepted before register names.  For COFF format, which
705   doesn't use underscore prefixes for C labels, it is required, so variable "a0"
706   can be distinguished from the register.
707
708 * Last public release was 1.38.  Lots of configuration changes since then, lots
709   of new CPUs and formats, lots of bugs fixed.
710
711 \f
712 Copyright (C) 2012-2017 Free Software Foundation, Inc.
713
714 Copying and distribution of this file, with or without modification,
715 are permitted in any medium without royalty provided the copyright
716 notice and this notice are preserved.
717
718 Local variables:
719 fill-column: 79
720 End: