1 2007-09-12 Jan Beulich <jbeulich@novell.com>
3 * config/tc-i386.c (md_assemble): Move handling of extrq/insertq
4 after generic operand swapping, and swap only the immediate operands.
6 2007-09-11 Nathan Sidwell <nathan@codesourcery.com>
8 * config/tc-m68k.c (m68k_ip): Add mcfisa_c case.
9 (m68k_elf_final_processing): Add EF_M68K_CF_ISA_C_NODIV.
11 2007-09-09 H.J. Lu <hongjiu.lu@intel.com>
13 * tc-i386.c (output_insn): Only check SSE4.2 and ABM for 3
16 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
18 * config/tc-i386.c (cpu_flags_check_x64): Renamed to ...
19 (cpu_flags_check_cpu64): This. Inline.
20 (uints_all_zero): New.
22 (uints_equal): Likewise
23 (UINTS_ALL_ZERO): Likewise
25 (UINTS_CLEAR): Likewise
26 (UINTS_EQUAL): Likewise
27 (cpu_flags_and): Likewise.
28 (cpu_flags_or): Likewise.
29 (operand_type_and): Likewise.
30 (operand_type_or): Likewise.
31 (operand_type_xor): Likewise.
32 (cpu_flags_not): Inline and use switch instead of loop.
33 (cpu_flags_match): Updated.
34 (operand_type_match): Likewise.
35 (smallest_imm_type): Likewise.
36 (set_cpu_arch): Likewise.
38 (md_assemble): Likewise.
39 (parse_insn): Likewise.
40 (optimize_imm): Likewise.
41 (match_template): Likewise.
42 (process_suffix): Likewise.
43 (update_imm): Likewise.
44 (finalize_imm): Likewise.
45 (process_operands): Likewise.
46 (build_modrm_byte): Likewise.
47 (i386_immediate): Likewise.
48 (i386_displacement): Likewise.
49 (i386_index_check): Likewise.
50 (i386_operand): Likewise.
51 (i386_target_format): Likewise.
52 (intel_e11): Likewise.
53 (operand_type): Remove implicitregister.
54 (operand_type_check): Updated. Inline.
55 (cpu_flags_all_zero): Removed.
56 (operand_type_all_zero): Likewise.
57 (i386_array_biop): Likewise.
58 (cpu_flags_biop): Likewise.
59 (operand_type_biop): Likewise.
61 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
63 * Makefile.am: Run "make dep-am".
64 * Makefile.in: Regenerate.
66 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
68 * configure.in (AC_CHECK_HEADERS): Add limits.h.
69 * configure: Regenerated.
70 * config.in: Likewise.
72 * config/tc-i386.c: Include "opcodes/i386-init.h".
73 (_i386_insn): Use i386_operand_type for types.
74 (cpu_arch_flags): Updated to new types with bitfield.
75 (cpu_arch_tune_flags): Likewise.
76 (cpu_arch_isa_flags): Likewise.
78 (i386_align_code): Likewise.
79 (set_code_flag): Likewise.
80 (set_16bit_gcc_code_flag): Likewise.
81 (set_cpu_arch): Likewise.
82 (md_assemble): Likewise.
83 (parse_insn): Likewise.
84 (process_operands): Likewise.
85 (output_branch): Likewise.
86 (output_jump): Likewise.
87 (parse_real_register): Likewise.
88 (mode_from_disp_size): Likewise.
89 (smallest_imm_type): Likewise.
91 (type_names): Likewise.
94 (swap_2_operands): Likewise.
95 (optimize_imm): Likewise.
96 (optimize_disp): Likewise.
97 (match_template): Likewise.
98 (check_string): Likewise.
99 (process_suffix): Likewise.
100 (check_byte_reg): Likewise.
101 (check_long_reg): Likewise.
102 (check_qword_reg): Likewise.
103 (check_word_reg): Likewise.
104 (finalize_imm): Likewise.
105 (build_modrm_byte): Likewise.
106 (output_insn): Likewise.
107 (disp_size): Likewise.
108 (imm_size): Likewise.
109 (output_disp): Likewise.
110 (output_imm): Likewise.
112 (i386_immediate): Likewise.
113 (i386_displacement): Likewise.
114 (i386_index_check): Likewise.
115 (i386_operand): Likewise.
116 (parse_real_register): Likewise.
117 (i386_intel_operand): Likewise.
118 (intel_e09): Likewise.
119 (intel_bracket_expr): Likewise.
120 (intel_e11): Likewise.
121 (cpu_arch_flags_not): New.
122 (cpu_flags_check_x64): Likewise.
123 (cpu_flags_all_zero): Likewise.
124 (cpu_flags_not): Likewise.
125 (i386_cpu_flags_biop): Likewise.
126 (cpu_flags_biop): Likewise.
127 (cpu_flags_match); Likewise.
131 (reg16_inoutportreg): Likewise.
135 (disp16_32): Likewise.
137 (baseindex): Likewise.
145 (imm16_32): Likewise.
146 (imm16_32s): Likewise.
147 (imm16_32_32s): Likewise.
148 (operand_type): Likewise.
149 (operand_type_check): Likewise.
150 (operand_type_match): Likewise.
151 (operand_type_register_match): Likewise.
152 (update_imm): Likewise.
153 (set_code_flag): Also update cpu_arch_flags_not.
154 (set_16bit_gcc_code_flag): Likewise.
155 (md_begin): Likewise.
156 (parse_insn): Use cpu_flags_check_x64 to check 64bit support.
157 Use cpu_flags_match to match instructions.
158 (i386_target_format): Update cpu_arch_isa_flags and
159 cpu_arch_tune_flags to i386_cpu_flags type with bitfield.
160 (smallest_imm_type): Check cpu_arch_tune to tune for i486.
161 (match_template): Don't initialize overlap0, overlap1,
162 overlap2, overlap3 and operand_types.
163 (process_suffix): Handle crc32 with 64bit register.
165 (CONSISTENT_REGISTER_MATCH): Likewise.
167 * config/tc-i386.h (arch_entry): Updated to i386_cpu_flags
170 2007-09-06 H.J. Lu <hongjiu.lu@intel.com>
172 * config/tc-i386.c (match_template): Handle invlpga, vmload,
173 vmrun and vmsave in SVME.
174 (process_suffix): Likewise.
176 2007-09-05 H.J. Lu <hongjiu.lu@intel.com>
178 * config/tc-i386.c (i386_index_check): Don't use RegRex
179 on the reg_type field.
180 (parse_real_register): Use `||' instead of `|'.
182 2007-09-04 H.J. Lu <hongjiu.lu@intel.com>
184 * config/tc-i386.c (process_operands): Remove segment override
185 check on SVME instructions.
186 (i386_index_check): Remove memory operand check on SVME
189 2007-09-04 Alan Modra <amodra@bigpond.net.au>
191 * config/tc-spu.c (struct spu_insn): Delete "flag". Add "reloc".
192 (md_assemble): Update init of insn. Use insn.reloc instead of
193 calculating from flag.
194 (get_imm): Set reloc rather than flag.
195 (calcop): Formatting.
197 2007-08-29 Daniel Jacobowitz <dan@codesourcery.com>
199 * dwarf2dbg.c (dwarf2_directive_loc): Emit duplicate .loc directives.
201 2007-08-28 Daniel Jacobowitz <dan@codesourcery.com>
203 * doc/c-arc.texi: Fix typo.
205 2007-08-28 H.J. Lu <hongjiu.lu@intel.com>
207 * config/tc-i386.c (process_suffix): Handle cmpxchg8b in
210 2007-08-28 Nathan Sidwell <nathan@codesourcery.com>
212 * config/tc-m68k.c (mcf52235_ctrl): Add cache registers.
213 (mcf5253_ctrl): Add RAMBAR, MBAR, MBAR2.
215 (m68k_cpus): Adjust 5407 entry.
217 2007-08-28 Maxim Kuvyrkov <maxim@codesourcery.com>
219 * config/tc-m68k.c (mcf51qe_ctrl): Define 51QE control registers.
220 (m68k_cpus): Define 51QE cpu.
222 2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
223 Joseph Myers <joseph@codesourcery.com>
225 * as.c (main): Flush stderr before printing listings to ensure
226 consistent output order across platforms.
228 2007-08-28 Robert Sebastian Gerus <arachnist@gmail.com>
230 * configure.tgt: Add support for i[3-7]86-*-dragonfly*.
232 2007-08-24 Joseph Myers <joseph@codesourcery.com>
233 Paul Brook <paul@codesourcery.com>
236 * as.h (remap_debug_filename, add_debug_prefix_map): Declare.
237 * as.c (show_usage): Document --debug-prefix-map option.
238 (parse_args): Handle --debug-prefix-map.
239 * dwarf2dbg.c (out_file_list, out_debug_info): Remap debug paths.
240 * stabs.c (stabs_generate_asm_file): Remap debug paths.
241 * Makefile.am (GAS_CFILES): Add remap.c
242 (GENERIC_OBJS): Add remap.o.
243 Regenerate dependencies.
244 * Makefile.in: Regenerate.
245 * doc/as.texinfo (--debug-prefix-map): Document.
247 2007-08-24 Aurelien Jarno <aurel32@debian.org>
249 * config/tc-arm.c (md_apply_fix): Cast bfd_vma values to long
250 before printing them.
252 2007-08-24 Anders Waldenborg <anders@0x63.nu>
253 Alan Modra <amodra@bigpond.net.au>
255 * config/tc-i386.c (lex_got): Don't scan past a comma.
257 2007-08-23 Ben Elliston <bje@au.ibm.com>
259 * config/tc-ppc.c (parse_cpu): Handle "750cl".
260 (pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
261 (md_show_usage): Document -m750cl.
262 (md_assemble): Handle two delimiters in succession (eg. `),').
263 * doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
264 * testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
265 * testsuite/gas/ppc/ppc750ps.s: New file.
266 * testsuite/gas/ppc/ppc750ps.d: Likewise.
268 2007-08-23 Ben Elliston <bje@au.ibm.com>
270 * doc/c-arm.texi (ARM Directives): Move brackets out of @vars.
272 2007-08-17 Alan Modra <amodra@bigpond.net.au>
275 * config/tc-i386.c (x86_cons): Complain about invalid @got etc.
277 (i386_immediate): Detect and complain about more cases of
278 invalid immediate expressions. Return failure rather than
279 converting them to zero.
280 (i386_displacement): Likewise.
282 2007-08-17 Alan Modra <amodra@bigpond.net.au>
284 * po/Make-in: Add --msgid-bugs-address to xgettext invocation.
286 2007-08-14 Andreas Schwab <schwab@suse.de>
288 * config/tc-ia64.c (tc_gen_reloc): Return NULL if relocation is
291 2007-08-12 Matthias Klose <doko@ubuntu.com>
293 * doc/Makefile.am (AM_MAKEINFOFLAGS, TEXI2DVI): Include
294 $(top_srcdir)/../../bfd/doc.
295 * doc/Makefile.in: Regenerate.
297 2007-08-10 Nick Clifton <nickc@redhat.com>
299 * NEWS: Add a marker for the 2.18 features.
301 2007-08-09 Paul Brook <paul@codesourcery.com>
303 * config/tc-arm.c (relaxed_symbol_addr): Compensate for alignment.
305 2007-08-09 H.J. Lu <hongjiu.lu@intel.com>
307 * config/tc-i386.c (check_byte_reg): Support pextrb and pinsrb.
309 2007-07-29 H.J. Lu <hongjiu.lu@intel.com>
311 * config/tc-i386.c (check_long_reg): Allow cvtss2si to convert
312 DWORD memory to Reg64 in Intel synax.
313 (check_qword_reg): Allow cvtsd2si to convert QWORD memory to
314 Reg32 in Intel syntax.
316 2007-07-25 Sterling Augustine <sterling@tensilica.com>
318 * config/tc-xtensa.c (xtensa_extui_opcode): New.
319 (xg_expand_assembly_insn): Check for invalid extui operands.
320 (md_begin): Initialize xtensa_extui_opcode.
322 2007-07-24 Nick Clifton <nickc@redhat.com>
324 * config/tc-mep.h (skip_whitespace): Remove definition.
326 2007-07-23 H.J. Lu <hongjiu.lu@intel.com>
328 * config/tc-i386.c (cpu_arch): Change i386 to PROCESSOR_I386.
331 (f32_patt): Remove f32_15.
332 (f16_patt): Likewise.
333 (i386_align_code): Updated to alt_long_patt for 64bit by
336 * config/tc-i386.h (processor_type): Add PROCESSOR_I386.
338 2007-07-23 Evandro Menezes <evandro.menezes@amd.com>
340 * config/tc-i386.c (i386_align_code): Enable alignment up to
341 MAX_MEM_FOR_RS_ALIGN_CODE bytes. Remove special treatment
344 * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Changed to 31.
346 2007-07-20 Nick Clifton <nickc@redhat.com>
348 * app.c (do_scrub_chars): Provide a one character buffer to hold a
349 pushed back newline at the end of an unterminated quoted string.
351 2007-07-14 Nick Clifton <nickc@redhat.com>
353 * config/tc-arm.c (create_register_alias): Return a boolean rather
355 Check the return value of insert_reg_alias and do not continue to
356 create aliases once an insertion has failed.
357 (s_unreq): Delete the all-upper-case and all-lower-case
358 alternatives as well.
360 2007-07-12 Kai Tietz <kai.tietz@onevision.com>
362 * symbols.c: Print bfd_hostptr_t to file via fprintf_vma.
365 2007-07-11 Daniel Jacobowitz <dan@codesourcery.com>
367 * config/tc-mips.c (mips_dwarf2_format, mips_dwarf2_addr_size): Use
370 2007-07-04 Richard Sandiford <richard@codesourcery.com>
372 * config/tc-mips.c (mips_cpu_info_table): Add new entries for
373 {24k,24ke,34k,74k}f{2_1,1_1,x}. Also add an entry for 74kf3_2.
374 Deprecate *x and *fx.
375 * doc/c-mips.texi: Document the new CPU arguments. Deprecate
378 2007-07-04 H.J. Lu <hongjiu.lu@intel.com>
380 * config/obj-coff.h (x86_64_target_format): Renamed to ...
381 (i386_target_format): This
382 (TARGET_FORMAT): Use i386_target_format.
384 * config/tc-i386.c (x86_64_target_format): Removed.
385 (i386_target_format): Handle PE formats.
387 2007-07-04 Nick Clifton <nickc@redhat.com>
389 * symbols.c (symbol_relc_make_value): Use bfd_sprintf_vma in order
390 to get the right length of printed value.
392 2007-07-03 Nick Clifton <nickc@redhat.com>
394 * COPYING: Replace with GPLv3 text.
395 * app.c: Update copyright notice to refer to GPLv3.
396 * as.c, as.h, asintl.h, atof_generic.c, bignum.h, bit_fix.h,
397 cgen.c, cond.c, debug.c, depend.c, dw2gencfi.c, dw2gencfi.h,
398 dwarf2dbg.c, dwarf2dbg.h, ecoff.c, ecoff.h, ehopt.c, emul.h,
399 emul_target.h, expr.c, expr.h, flonum-copy.c, flonum.h,
400 flonum-konst.c, frags.c, frags.h, hash.c, hash.h, input-file.c,
401 input-file.h, input-scrub.c, ibtl-lex.h, itbl-lex.l, itbl-ops.c,
402 itbl-ops.h, itbl-parse.y, listing.c, listing.h, literal.c,
403 macro.c, messages.c, obj.h, output-file.c, output-file.h, read.c,
404 read.h, sb.c, sb,h, stabs.c, struc-symbol.h, subsegs.c, subsegs.h,
405 symbols.c, symbols.h, tc.h, write.c, write.h, config/aout_gnu.h,
406 config/config/atof-ieee.c, config/atof-vax.c, config/bfin-aux.h,
407 config/bfin-defs.h, config/bfin-lex.l, config/bfin-parse.y,
408 config/itbl-mips.h, config/m68k-parse.h, config/m68k-parse.y,
409 config/obj-aout.c, config/obj-aout.h, config/obj-coff.c,
410 config/obj-coff.h, config/obj-ecoff.c, config/obj-ecoff.h,
411 config/obj-elf.c, config/obj-elf.h, config/obj-evax.c,
412 config/obj-evax.h, config/obj-multi.h, config/obj-som.c,
413 config/obj-som.h, config/tc-alpha.c, config/tc-alpha.h,
414 config/tc-arc.c, config/tc-arc.h, config/tc-arm.c,
415 config/tc-arm.h, config/tc-avr.c, config/tc-avr.h,
416 config/tc-bfin.c, config/tc-bfin.h, config/tc-cr16.c,
417 config/tc-cr16.h, config/tc-cris.c, config/tc-cris.h,
418 config/tc-crx.c, config/tc-crx.h, config/tc-d10v.c,
419 config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h,
420 config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.c,
421 config/tc-fr30.h, config/tc-frv.c, config/tc-frv.h,
422 config/tc-generic.c, config/tc-generic.h, config/tc-h8300.c,
423 config/tc-h8300.h, config/tc-hppa.c, config/tc-hppa.h,
424 config/tc-i370.c, config/tc-i370.h, config/tc-i386.c,
425 config/tc-i386.h, config/tc-i860.c, config/tc-i860.h,
426 config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c,
427 config/tc-ia64.h, config/tc-ip2k.c, config/tc-ip2k.h,
428 config/tc-iq2000.c, config/tc-iq2000.h, config/tc-m32c.c,
429 config/tc-m32c.h, config/tc-m32r.c, config/tc-m32r.h,
430 config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c,
431 config/tc-m68k.h, config/tc-maxq.c, config/tc-maxq.h,
432 config/tc-mcore.c, config/tc-mcore.h, config/tc-mep.c,
433 config/tc-mep.h, config/tc-mips.c, config/tc-mips.h,
434 config/tc-mmix.c, config/tc-mmix.h, config/tc-mn10200.c,
435 config/tc-mn10200.h, config/tc-mn10300.c, config/tc-mn10300.h,
436 config/tc-msp430.c, config/tc-msp430.h, config/tc-mt.c,
437 config/tc-mt.h, config/tc-ns32k.c, config/tc-ms32k.h,
438 config/tc-openrisc.c, config/tc-openrisc.h, config/tc-or32.c,
439 config/tc-or32.h, config/tc-pdp11.c, config/tc-pdp11.h,
440 config/tc-pj.c, config/tc-pj.h, config/tc-ppc.c, config/tc-ppc.h,
441 config/tc-s390.c, config/tc-s390.h, config/tc-score.c,
442 config/tc-score.h, config/tc-sh64.c, config/tc-sh64.h,
443 config/tc-sh.c, config/tc-sh.h, config/tc-sparc.c,
444 config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
445 config/tc-tic30.c, config/tc-tic30.h, config/tc-tic4x.c,
446 config/tc-tic4x.h, config/tc-tic54x.c, config/tc-tic54x.h,
447 config/tc-v850.c, config/tc-v850.h, config/tc-vax.c,
448 config/tc-vax.h, config/tc-xc16x.c, config/tc-x16x.h,
449 config/tc-xstormy16.c, config/tc-xstormy16.h, config/tc-xtensa.c,
450 config/tc-xtensa.h, config/tc-z80.c, config/tc-z80.h,
451 config/tc-z8k.c, config/tc-z8k.h, config/te-386bsd.h,
452 config/te-freebsd.h, config/te-hppa.h, config/te-irix.h,
453 config/te-netware.h, config/te-sparcaout.h, config/te-tmips.h,
454 config/te-vxworks.h, config/vax-inst.h, config/xtensa-istack.h,
455 config/xtensa-relax.c, config/xtensa-relax.h: Likewise.
457 * flonum-mult.c: Likewise, and also correct typo referring to
458 non-existant GNU Assembler General Public License.
459 * config/tc-m68851.h: Likewise.
460 * NEWS: Mention the new license. Also note where the 2.17 release
462 * config/e-crisaout.c: Add copyright header.
463 * config/e-criself.c, config/e-i386aout.c, config/e-i386coff.c,
464 config/e-i386elf.c, config/e-mipscoff.c, config/e-mipself.c,
465 config/obj-multi.c, config/te-aix5.h, config/te-armeabi.h,
466 config/te-armlinuxeabi.h, config/te-dynix.h, config/te-epoc-pe.h,
467 config/te-generic.h, config/te-gnu.h, config/te-go32.h,
468 config/te-hppa64.h, config/te-hppalinux64.h, config/te-hpux.h,
469 config/te-i386aix.h, config/te-ia64aix.h, config/te-interix.h,
470 config/te-linux.h, config/te-lnews.h, config/te-lynx.h,
471 config/te-mach.h, config/te-macos.h, config/te-nbsd532.h,
472 config/te-nbsd.h, config/te-pc532mach.h, config/te-pe.h,
473 config/te-pep.h, config/te-psos.h, config/te-riscix.h,
474 config/te-sun3.h, config/te-svr4.h, config/te-symbian.h,
475 config/te-wince-pe.h: Likewise.
477 2007-07-03 Nathan Sidwell <nathan@codesourcery.com>
479 * config/tc-m68k.c (m68k_ip): Add j & K operand types.
480 (install_operand): Add E encoding.
481 (md_begin): Check and skip initial '.' arg character.
482 (get_num): Add 0..511 case.
484 2007-07-03 Alan Modra <amodra@bigpond.net.au>
487 * config/obj-elf.c (elf_ecoff_set_ext): Make static when OBJ_MAYBE_ELF.
488 * config/obj-elf.h (obj_ecoff_set_ext): Comment.
490 2007-07-03 Mikkel Lauritsen <renard@nospam.dk>
493 * app.c (do_scrub_chars <state 5>): Check for output buffer full
496 2007-07-02 Joseph Myers <joseph@codesourcery.com>
498 * config/tc-mips.c (s_dtprelword, s_dtpreldword,
499 s_dtprel_internal): New.
500 (mips_pseudo_table): Add .dtprelword and .dtpreldword.
501 (md_apply_fix): Handle BFD_RELOC_MIPS_TLS_DTPREL32 and
502 BFD_RELOC_MIPS_TLS_DTPREL64.
504 2007-07-02 Alan Modra <amodra@bigpond.net.au>
506 * Makefile.am: Run "make dep-am".
507 * Makefile.in: Regenerate.
508 * aclocal.m4: Regenerate.
509 * config.in: Regenerate.
510 * doc/Makefile.in: Regenerate.
511 * po/POTFILES.in: Regenerate.
512 * po/gas.pot: Regenerate.
514 2007-07-02 Alan Modra <amodra@bigpond.net.au>
516 * config/tc-ppc.c (ppc_pe_section): Comment out code assigning
517 coff section flag values to bfd section flag.
519 2007-06-30 H.J. Lu <hongjiu.lu@intel.com>
521 * aclocal.m4: Regenerated.
522 * doc/Makefile.in: Likewise.
523 * Makefile.in: Likewise.
525 2007-06-29 Joseph Myers <joseph@codesourcery.com>
527 * as.c (main): Only call create_obj_attrs_section if IS_ELF.
529 2007-06-29 Joseph Myers <joseph@codesourcery.com>
531 * as.c (create_obj_attrs_section): New.
532 (main): Call create_obj_attrs_section for ELF.
533 * read.c (s_gnu_attribute, skip_whitespace, skip_past_char,
534 skip_past_comma, s_vendor_attribute): New.
535 (potable): Add gnu_attribute for ELF.
536 * read.h (s_vendor_attribute): Declare.
537 * config/tc-arm.c (s_arm_eabi_attribute): Replace by wrapper
538 round s_vendor_attribute.
539 (aeabi_set_public_attributes): Update for new attributes
541 (arm_md_end): Remove attributes contents setting now done
544 2007-06-29 M R Swami Reddy <MR.Swami.Redd@nsc.com>
546 * Makefile.am: Add CR16 related entry.
547 * Makefile.in: Regenerate.
548 * config/tc-cr16.h: New file
549 * config/tc-cr16.c: New file
550 * doc/c-cr16.texi: New file for cr16
551 * doc/all.texi: Entry for cr16
552 * doc/Makefile.am: Added c-cr16.texi
553 * doc/Makefile.in: Regenerate
554 * doc/as.texinfo: Entry for CR16 target
555 * NEWS: Announce the support for the new target.
557 2007-06-26 Paul Brook <paul@codesourcery.com>
559 * config/tc-arm.c (parse_operands): Accept generic coprocessor regs
561 (reg_names): Add fpinst, pfinst2, mvfr0 and mvfr1.
563 2007-06-25 H.J. Lu <hongjiu.lu@intel.com>
565 * config/tc-i386.c (process_operands): Replace regKludge
568 2007-06-25 Richard Sandiford <richard@codesourcery.com>
570 * config/tc-mips.h (TC_SYMFIELD_TYPE): New.
571 * config/tc-mips.c (append_insn): Record which symbols have
572 R_MIPS16_26 relocations against them.
573 (mips_fix_adjustable): Don't reduce relocations against such symbols.
575 2007-06-22 Sterling Augustine <sterling@tensilica.com>
577 * config/tc-xtensa.c (xg_assembly_relax): Comment termination rules.
578 (frag_format_size): Handle RELAX_IMMED_STEP3.
579 (xtensa_relax_frag, md_convert_frag): Likewise.
580 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_IMMED_STEP3.
581 (RELAX_IMMED_MAXSTEPS): Adjust.
582 * config/xtensa-relax.c (widen_spec_list): Add transitions from
583 wide branches to branch-over-jumps.
584 (build_transition): Handle wide branches in transition patterns.
586 2007-06-22 H.J. Lu <hongjiu.lu@intel.com>
588 * config/tc-i386.c (disp_size): New.
589 (imm_size): Likewise.
590 (output_disp): Use disp_size and imm_size.
591 (output_imm): Use imm_size.
593 2007-06-19 Sterling Augustine <sterling@tensilica.com>
595 * config/tc-xtensa.h (struct xtensa_frag_type): Update comment about
596 use of literal_frag field.
597 * config/tc-xtensa.c (xtensa_mark_literal_pool_location): Record frag
598 in the literal_frag field.
599 (xtensa_move_literals): Use it here instead of searching. Update
600 literal_frag field with new value.
602 2007-06-14 Paul Brook <paul@codesourcery.com>
604 * config/tc-arm.c (do_t_mov_cmp): Handle shift by register and
605 narrow shift by immediate.
607 2007-06-14 H.J. Lu <hongjiu.lu@intel.com>
609 * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
611 * acinclude.m4: Don't include m4 files.
612 (BFD_BINARY_FOPEN): Removed.
613 Remove libtool kludge.
615 * Makefile.in: Regenerated.
616 * doc/Makefile.in: Likewise.
617 * aclocal.m4: Likewise.
618 * configure: Likewise.
620 2007-06-11 Sterling Augustine <sterling@tensilica.com>
621 Bob Wilson <bob.wilson@acm.org>
623 * config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
624 (XTENSA_PROP_NO_TRANSFORM): ...this.
625 (frag_flags_struct): Move is_no_transform out of the insn sub-struct.
626 (xtensa_mark_frags_for_org): New.
627 (xtensa_handle_align): Set RELAX_ORG frag subtype for rs_org.
628 (xtensa_post_relax_hook): Call xtensa_mark_frags_for_org.
629 (get_frag_property_flags): Adjust reference to is_no_transform flag.
630 (xtensa_frag_flags_combinable): Likewise.
631 (frag_flags_to_number): Likewise. Use XTENSA_PROP_NO_TRANSFORM.
632 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG.
634 2007-06-06 Paul Brook <paul@codesourcery.com>
636 * config/tc-arm.c (s_align): Pad code sections appropriately.
638 2007-06-05 Paul Brook <paul@codesourcery.com>
640 * config/tc-arm.c (insns): Correct Thumb-2 ldrd/strd opcodes.
642 2007-06-05 Nick Clifton <nickc@redhat.com>
645 * config/tc-sparc.c (sparc_ip): Terminate tls_ops array.
647 2007-06-05 Alan Modra <amodra@bigpond.net.au>
649 * config/tc-spu.c (spu_cons): Use deferred_expression. Handle
651 (tc_gen_reloc): Abort if neither addsy or subsy is set.
652 (md_apply_fix): Don't attempt to resolve SPU_PPU relocs.
653 * config/tc-spu.h (md_operand): Handle @ppu without sym.
655 2007-05-31 Paul Brook <paul@codesourcery.com>
657 * config/tc-arm.c (insns): Allow strex on M profile cores.
659 2007-05-29 David S. Miller <davem@davemloft.net>
660 Jakub Jelinek <jakub@redhat.com>
663 * config/tc-sparc.c (md_apply_fix): Fix relocation overflow checks
664 for BFD_RELOC_SPARC_WDISP16 and BFD_RELOC_SPARC_WDISP19.
666 2007-05-29 Alan Modra <amodra@bigpond.net.au>
668 * config/tc-spu.h: Wrap in #ifndef/#endif. Delete coff macros.
670 2007-05-29 Alan Modra <amodra@bigpond.net.au>
672 * config/tc-ppc.c: Convert to ISO C.
673 * config/tc-ppc.c: Likewise.
675 2007-05-29 Alan Modra <amodra@bigpond.net.au>
677 * write.h (EXEC_MACHINE_TYPE): Delete.
678 (string_byte_count, section_alignment): Delete.
680 2007-05-28 Nathan Sidwell <nathan@codesourcery.com>
682 * app.c (do_scrub_chars): Cope with \ at end of buffer.
684 2007-05-26 Alan Modra <amodra@bigpond.net.au>
686 * config/tc-ppc.c (ppc_insert_operand): Truncate sign bits in
687 top 32 bits of 64 bit value if so doing results in passing
688 range check. Rewrite sign extension fudges similarly. Enable
689 fudges for powerpc64 too. Report user value if range check
690 fails rather than fudged value. Negate PPC_OPERAND_NEGATIVE
691 range rather than value, also to report user value on failure.
693 2007-03-25 Paul Brook <paul@codesourcery.com>
695 * config/tc-arm.c (T2_SUBS_PC_LR): Define.
696 (do_t_add_sub): Correctly encode subs pc, lr, #const.
697 (do_t_mov_cmp): Correctly encode movs pc, lr.
699 2007-05-24 Steve Ellcey <sje@cup.hp.com>
701 * Makefile.in: Regnerate.
702 * configure: Regenerate.
703 * aclocal.m4: Regenerate.
704 * doc/Makefile.in: Regenerate.
706 2007-05-22 Bob Wilson <bob.wilson@acm.org>
708 * doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements
709 and index entries about automatic alignment of ENTRY instructions.
711 2007-05-22 Nick Clifton <nickc@redhat.com>
713 * doc/as.texinfo: Use @copying around the copyright notice.
715 2007-05-18 Joseph Myers <joseph@codesourcery.com>
717 * config/tc-mips.c (s_mipsset): Use generic s_set for directives
720 2007-05-17 H.J. Lu <hongjiu.lu@intel.com>
723 2003-06-05 Michal Ludvig <mludvig@suse.cz>
724 * doc/as.texinfo: Document new directives: .cfi_restore,
725 .cfi_undefined, .cfi_same_value, .cfi_return_column,
726 .cfi_remember_state and .cfi_restore_state.
728 2007-05-17 Nathan Sidwell <nathan@codesourcery.com>
730 * config/tc-m68k.c (md_apply_fix): Show value of out of range
731 fixups in error message.
732 (md_conver_frag_1): Propagate the fix source location and use
733 as_bad_where rather than fatal, for better error messages.
735 2007-05-16 Paul Brook <paul@codesourcery.com>
737 * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.
739 2007-05-15 Mark Shinwell <shinwell@codesourcery.com>
741 * app.c (do_scrub_chars): Don't damage \@ pseudo-variables.
743 2007-05-15 Vincent Riviere <vincent.riviere@freesbee.fr>
746 * config/tc-m68k.c (relaxable_symbol): Make sure that the correct
747 addend is stored for relocs against weak symbols.
748 (md_apply_fix): So not loose track of addend for relocs against
751 2007-05-14 Thiemo Seufer <ths@mips.com>
753 * config/tc-mips.c (md_parse_option): Fix parsing of -O option.
755 2007-05-14 Mei Ligang <ligang@sunnorth.com.cn>
757 * config/tc-score.c (data_op2, validate_immediate): Fix bug for
758 addri, addri.c, subi, and subi.c when immediate number is hex.
759 (score_insns): Remove subis and subis.c.
760 (do_sub_rdi16): Delete.
762 2007-05-11 Alan Modra <amodra@bigpond.net.au>
764 * config/tc-spu.c (md_pseudo_table): Add int, long, quad. Call
766 (md_assemble): Tidy use of insn.flag.
767 (get_imm): Likewise. Handle uppercase input too.
768 (spu_cons): New function.
769 * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
770 (TC_FORCE_RELOCATION): Don't resolve them either.
772 2007-05-05 Mark Shinwell <shinwell@codesourcery.com>
774 * config/tc-arm.c (md_apply_fix): Generate more accurate
775 diagnostic when 8-bit immediate range is exceeded for
776 BFD_RELOC_ARM_OFFSET_IMM8.
778 2007-05-04 Alan Modra <amodra@bigpond.net.au>
781 * config/tc-i386.c (lex_got): Don't replace the reloc token with
782 a space if we already have a space.
784 2007-05-03 H.J. Lu <hongjiu.lu@intel.com>
786 * config/tc-i386.c (match_template): Don't explicitly check
787 suffix for crc32 in Intel mode.
788 (process_suffix): Issue an error for crc32 if the operand size
791 2007-05-03 Vincent Riviere <vincent.riviere@freesbee.fr>
792 Nick Clifton <nickc@redhat.com>
795 * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols.
796 (tc_gen_reloc): Adjust the addend of relocs against weak symbols.
797 (md_apply_fix): Put zero values into the frags referencing weak
800 2007-05-02 Alan Modra <amodra@bigpond.net.au>
803 * config/tc-ppc.c (ppc_insert_operand): Don't increase min for
806 2007-05-01 H.J. Lu <hongjiu.lu@intel.com>
808 * config/tc-i386.c (match_template): Check suffix for crc32 in
810 (process_suffix): Default the suffix of 8bit crc32 to
812 (check_byte_reg): Skip check for 8bit crc32.
814 2007-04-30 H.J. Lu <hongjiu.lu@intel.com>
816 * config/tc-i386.c (md_assemble): Use register_prefix in
817 error/warning message.
818 (check_byte_reg): Likewise.
819 (check_long_reg): Likewise.
820 (check_qword_reg): Likewise.
821 (check_word_reg): Likewise.
822 (process_operands): Likewise.
824 2007-04-30 Alan Modra <amodra@bigpond.net.au>
827 * config/tc-ppc.c (ppc_insert_operand): Disable range check if
830 2007-04-28 Thiemo Seufer <ths@networkno.de>
832 * config/tc-mips.c: Fix comment.
834 2007-04-26 Anatoly Sokolov <aesok@post.ru>
836 * config/tc-avr.c (mcu_types): Add support for atmega8hva and
837 atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
838 * doc/c-avr.texi: Document new devices.
840 2007-04-24 Alan Modra <amodra@bigpond.net.au>
842 * Makefile.am: Run "make dep-am".
843 * Makefile.in: Regenerate.
845 2007-04-23 Nathan Sidwell <nathan@codesourcery.com>
847 * config/tc-m68k.c (mcf54455_ctrl): New.
848 (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
849 (m68k_archs): Add isac.
850 (m68k_cpus): Add 54455 family.
851 (m68k_ip): Split Bg into Bb, Bs, Bg.
852 (m68k_elf_final_processing): Add ISA_C.
853 * doc/c-m68k.texi (M680x0 Options): Add isac.
855 2007-04-22 Alan Modra <amodra@bigpond.net.au>
857 * read.c (read_a_source_file): Skip multiple spaces to
858 cover hack in mmix md_start_line_hook which overwrites a
859 colon with a space. Delete sermon and needless assertion.
861 2007-04-21 Alan Modra <amodra@bigpond.net.au>
863 * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned.
864 (md_atof): Make number_of_chars unsigned. Revert last change.
865 * config/tc-or32.c (md_apply_fix): Delete bogus assertions.
866 * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF.
867 * config/tc-sh.h (md_optimize_expr): Likewise.
868 * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus
870 * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise.
872 2007-04-21 Nick Clifton <nickc@redhat.com>
874 * config/atof-vax.c (md_atof): Fix comparison inside know().
876 * config/tc-ia64.c (emit_one_bundle): Fix typo.
878 2007-04-21 Alan Modra <amodra@bigpond.net.au>
880 * expr.c (expr): Assert on rankarg, not rank which can be unsigned.
881 * read.c (read_a_source_file): Remove buffer_limit[-1] assertion.
882 Don't skip over NUL char.
883 (pseudo_set): Set X_op for registers to O_register.
884 * symbols.c (symbol_clone): Remove assertion that sym is defined.
885 (resolve_symbol_value): Resolve O_register symbols.
886 * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab.
887 Instead find st(0) by hash lookup.
888 * config/tc-ppc.c (ppc_macro): Warning fix.
890 * as.h (ENABLE_CHECKING): Default define to 0.
891 (know): Assert if ENABLE_CHECKING.
892 (struct relax_type): Remove superfluous declaration.
893 * configure.in (--enable-checking): New.
894 * configure: Regenerate.
895 * config.in: Regenerate.
896 * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING.
897 Check for duplicate powerpc_operands entries.
899 2007-04-20 Nathan Sidwell <nathan@codesourcery.com>
901 * config/tc-m68k.c (mcf5253_ctrl): New.
902 (mcf52223_ctrl): New.
903 (m68k_cpus): Add 5253, 52221, 52223.
905 * config/m68k-parse.h (RAMBAR_ALT): New.
906 * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
907 (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
908 mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
909 mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
910 mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
912 (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
913 (m68k_cpus): Adjust 5206, 5206e & 5307 entries.
914 (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used. Add it
915 to control register mapping.
917 2007-04-20 Alan Modra <amodra@bigpond.net.au>
919 * messages.c (as_internal_value_out_of_range): Fix typo in
920 error message. Return after printing domain error.
921 * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
922 in max when shifting right.
924 2007-04-20 Alan Modra <amodra@bigpond.net.au>
926 * messages.c (as_internal_value_out_of_range): Extend to report
927 errors for values with invalid low bits set.
928 * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
929 fields. Check that operands and opcode fields are disjoint.
930 (ppc_insert_operand): Check operands using mask rather than bit
931 count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
933 (md_apply_fix): Adjust for struct powerpc_operand change.
935 2007-04-19 Paul Brook <paul@codesourcery.com>
937 * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
938 Thumb-1. Add sanity check for bogus relaxations.
940 2007-04-19 Paul Brook <paul@codesourcery.com>
942 * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.
944 2007-04-19 Alan Modra <amodra@bigpond.net.au>
946 * Makefile.am: Run "make dep-am".
947 * Makefile.in: Regenerate.
949 2007-04-19 Nathan Froyd <froydnj@codesourcery.com>
951 * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.
953 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
955 * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.
957 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
959 * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
960 (match_template): Handle operand size for crc32 in SSE4.2.
961 (process_suffix): Handle operand type for crc32 in SSE4.2.
962 (output_insn): Support SSE4.2.
964 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
966 * config/tc-i386.c (cpu_arch): Add .sse4.1.
967 (process_operands): Adjust implicit operand for blendvpd,
968 blendvps and pblendvb in SSE4.1.
969 (output_insn): Support SSE4.1.
971 2007-04-18 Paul Brook <paul@codesourcery.com>
973 * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.
975 2007-04-16 Kaz Kojima <kkojima@rr.iij4u.or.jp>
977 * config/tc-sh.c (sh_handle_align): Call as_bad_where instead
978 of as_warn_where for misaligned data.
980 2007-04-15 Kaz Kojima <kkojima@rr.iij4u.or.jp>
982 * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
985 2007-04-14 Steve Ellcey <sje@cup.hp.com>
987 * Makefile.am: Add ACLOCAL_AMFLAGS.
988 * Makefile.in: Regenerate.
990 2007-04-14 Kaz Kojima <kkojima@rr.iij4u.or.jp>
992 * config/tc-sh.c (align_test_frag_offset_fixed_p): New.
993 (sh_optimize_expr): Likewise.
994 * config/tc-sh.h (md_optimize_expr): Define.
995 (sh_optimize_expr): Prototype.
997 2007-04-06 Matt Thomas <matt@netbsd.org>
999 * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
1000 to emit pcrel relocations by DWARF2 in non-code sections. Borrowed
1001 heavily from tc-sparc.c. (vax_cons_fix_new): Likewise.
1003 2007-04-04 Kazu Hirata <kazu@codesourcery.com>
1005 * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.
1007 2007-04-04 Paul Brook <paul@codesourcery.com>
1009 * config/tc-arm.c (do_neon_ext): Enforce immediate range.
1010 (insns): Use I15 for vext.
1012 2007-04-04 Paul Brook <paul@codesourcery.com>
1014 * configure.tgt: Loosen checks for arm uclinux eabi targets.
1016 2007-04-02 Sterling Augustine <sterling@tensilica.com>
1018 * config/tc-xtensa.c (xtensa_flush_pending_output): Check
1019 outputting_stabs_line_debug.
1021 2007-03-26 Anatoly Sokolov <aesok@post.ru>
1023 * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
1024 at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
1026 * doc/c-avr.texi: Document new devices.
1028 2007-04-02 Richard Sandiford <richard@codesourcery.com>
1030 * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
1031 * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
1032 * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
1034 2007-03-30 Sterling Augustine <sterling@tensilica.com>
1035 Bob Wilson <bob.wilson@acm.org>
1037 * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
1038 Do not check is_loop_target flag.
1039 (xtensa_frob_label): Adjust calls to xtensa_move_labels.
1040 (xg_assemble_vliw_tokens): Likewise. Also avoid calling
1041 xtensa_move_labels for alignment of loop opcodes.
1043 2007-03-30 H.J. Lu <hongjiu.lu@intel.com>
1045 * config/tc-i386.c (process_suffix): Reindent a bit.
1047 2007-03-30 Paul Brook <paul@codesourcery.com>
1049 * config/tc-arm.c (encode_thumb2_ldmstm): New function.
1050 (do_t_ldmstm): Generate 16-bit push/pop. Use encode_thumb2_ldmstm.
1051 (do_t_push_pop): Use encode_thumb2_ldmstm.
1053 2007-03-29 DJ Delorie <dj@redhat.com>
1055 * config/tc-m32c.c (rl_for, relaxable): Protect argument.
1056 (md_relax_table): Add entries for ADJNZ macros.
1057 (M32C_Macros): Add ADJNZ macros.
1058 (subtype_mappings): Add entries for ADJNZ macros.
1059 (insn_to_subtype): Check for adjnz and sbjnz insns.
1060 (md_estimate_size_before_relax): Pass insn to insn_to_subtype.
1061 (md_convert_frag): Convert adjnz and sbjnz.
1063 2007-03-29 Nick Clifton <nickc@redhat.com>
1065 * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
1067 * itbl-ops.h (enum e_processor): Initialise the e_nprocs field
1068 using ITBL_NUMBER_OF_PROCESSORS.
1069 * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.
1071 2007-03-28 H.J. Lu <hongjiu.lu@intel.com>
1073 * config/tc-i386.c (build_modrm_byte): For instructions with 2
1074 register operands, encode destination in i.rm.regmem if its
1077 2007-03-28 Richard Sandiford <richard@codesourcery.com>
1078 Phil Edwards <phil@codesourcery.com>
1080 * doc/as.texinfo: Put the contents after the title page rather
1081 than at the end of the document.
1083 2007-03-27 Alan Modra <amodra@bigpond.net.au>
1085 * NEWS: Mention ".reloc".
1087 2007-03-26 Sterling Augustine <sterling@tensilica.com>
1089 * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
1090 in FLIX instructions.
1092 2007-03-26 Julian Brown <julian@codesourcery.com>
1094 * config/tc-arm.c (arm_it): Add immisfloat field.
1095 (parse_qfloat_immediate): Disallow integer syntax for floating-point
1096 immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
1097 (parse_neon_mov): Set immisfloat bit for operand if it parsed as a
1099 (neon_cmode_for_move_imm): Reject non-float immediates for float
1101 (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
1103 2007-03-26 Julian Brown <julian@codesourcery.com>
1105 * doc/c-arm.texi: Add documentation for .dn/.qn directives.
1107 2007-03-26 Alan Modra <amodra@bigpond.net.au>
1109 * doc/as.texinfo (Reloc): Document.
1110 * read.c (potable): Add "reloc".
1111 (s_reloc): New function.
1112 * write.c (reloc_list): New global var.
1113 (resolve_reloc_expr_symbols): New function.
1114 (write_object_file): Call it.
1115 (write_relocs): Process reloc_list.
1116 * write.h (struct reloc_list): New.
1117 (reloc_list): Declare.
1119 2007-03-24 Paul Brook <paul@codesourcery.com>
1121 * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.
1123 2007-03-24 Paul Brook <paul@codesourcery.com>
1124 Mark Shinwell <shinwell@codesourcery.com>
1126 * config/tc-arm.c (operand_parse_code): Add OP_oRRw.
1127 (parse_operands): Don't expect comma if first operand missing.
1129 (do_srs): Encode register number, checking it is r13. Update comment.
1130 (insns): Update SRS entries to take a register.
1132 2007-03-23 H.J. Lu <hongjiu.lu@intel.com>
1134 * config/tc-i386.c (md_begin): Allow '.' in mnemonic.
1136 2007-03-23 Mark Shinwell <shinwell@codesourcery.com>
1138 * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
1139 attempt to jump to the next instruction into NOPs.
1141 2007-03-23 Alan Modra <amodra@bigpond.net.au>
1143 * config/tc-spu.c: Don't include opcode/spu.h.
1144 (md_assemble): Set tc_fix_data.insn_tag and arg_format.
1145 (md_apply_fix): Adjust.
1146 * config/tc-spu.h: Include opcode/spu.h.
1147 (struct tc_fix_info): New.
1148 (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
1149 (TC_FORCE_RELOCATION): Define.
1151 2007-03-22 Joseph Myers <joseph@codesourcery.com>
1153 * doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
1155 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1157 * config/tc-i386.c (process_suffix): Check 0x90 instead of
1158 xchg for xchg %rax,%rax.
1160 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1162 * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
1163 and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
1165 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1168 * config/tc-i386.c (match_template): Properly handle 64bit mode
1171 2007-03-21 Anton Ertl <anton@mips.complang.tuw>
1174 * config/tc-alpha.c (emit_ustX): Fix ustq code generation.
1176 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1178 * Makefile.am: Run dep-am.
1179 * Makefile.in: Regenerated.
1181 * config/tc-i386.c: Don't include "opcodes/i386-opc.h".
1183 * config/tc-i386.h: Include "opcodes/i386-opc.h".
1184 (NOP_OPCODE): Removed.
1185 (template): Likewise.
1187 2007-03-21 Andreas Schwab <schwab@suse.de>
1189 * config/tc-i386.h (NOP_OPCODE): Restore.
1191 2007-03-18 Mark Shinwell <shinwell@codesourcery.com>
1193 * config/tc-arm.c (do_mul): Don't warn about overlapping
1194 Rd and Rm operands when assembling for v6 or above.
1195 Correctly capitalize register names in the messages.
1196 (do_mlas): Likewise. Delete spurious blank line.
1198 2007-03-16 Kazu Hirata <kazu@codesourcery.com>
1200 * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.
1202 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1204 * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
1206 (parse_register): Use i386_regtab_size instead of ARRAY_SIZE
1209 2007-03-15 Alexandre Oliva <aoliva@redhat.com>
1212 * app.c (do_scrub_chars): PUT after setting states.
1214 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1216 * Makefile.am: Run "make dep-am".
1217 * Makefile.in: Regenerated.
1219 * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
1221 (md_begin): Check reg_name != NULL for the last entry in
1224 * config/tc-i386.h: Move many entries to opcode/i386.h and
1227 * configure.in (need_opcodes): Set true for i386.
1228 * configure: Regenerated.
1230 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1232 * Makefile.am (REPORT_BUGS_TO): Removed.
1233 (INCLUDES): Remove -DREPORT_BUGS_TO.
1234 * Makefile.in: Regenerated.
1236 * configure.in (--with-bugurl): Removed.
1237 * configure: Regenerated.
1239 * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
1240 (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
1241 (TEXI2DVI): Likewise.
1242 (gasver.texi): Removed.
1243 (MOSTLYCLEANFILES): Remove gasver.texi.
1244 (as.1): Don't depend on gasver.texi.
1245 * doc/Makefile.in: Regenerated.
1247 * doc/as.texi: Include bfdver.texi instead of gasver.texi.
1249 2007-03-14 Daniel Jacobowitz <dan@codesourcery.com>
1251 * config/tc-arm.c (arm_copy_symbol_attributes): New.
1252 * config/tc-arm.h (arm_copy_symbol_attributes): Declare.
1253 (TC_COPY_SYMBOL_ATTRIBUTES): Define.
1254 * gas/symbols.c (copy_symbol_attributes): Use
1255 TC_COPY_SYMBOL_ATTRIBUTES.
1257 2007-03-14 Paul Brook <paul@codesourcery.com>
1259 * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.
1261 2007-03-14 Alan Modra <amodra@bigpond.net.au>
1264 * write.c (relax_segment): Insert extra alignment padding
1265 to break infinite relax loop when given impossible
1266 gcc_except_table assembly.
1268 2007-03-12 H.J. Lu <hongjiu.lu@intel.com>
1270 * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
1271 on i.tm.base_opcode.
1272 (match_template): Likewise.
1273 (process_operands): Use ~0x3 mask to match MOV_AX_DISP32.
1275 * config/tc-i386.h (Opcode_D): New.
1276 (Opcode_FloatR): Likewise.
1277 (Opcode_FloatD): Likewise.
1280 (FloatMF): Likewise.
1284 2007-03-09 Alexandre Oliva <aoliva@redhat.com>
1286 * app.c (do_scrub_chars): Recognize comments after # line "file".
1287 * read.c (get_linefile_number): New.
1288 (s_app_line): Accept ill-formed .linefile lines as comments.
1290 2007-03-09 Alan Modra <amodra@bigpond.net.au>
1292 * config/tc-i386.h (WORKING_DOT_WORD): Define.
1294 2007-03-09 Alexandre Oliva <aoliva@redhat.com>
1296 * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
1297 * as.h (new_logical_line_flags): New.
1298 * input-scrub.c (new_logical_line): Turned into wrapper for...
1299 (new_logical_line_flags): this. Handle flags.
1300 * read.c (potable): Add linefile. Adjust appline argument.
1301 (s_app_file): Fake .appfiles no more.
1302 (s_app_line): For .linefile, accept file name and flags.
1304 2007-03-08 Alan Modra <amodra@bigpond.net.au>
1306 * symbols.c (symbol_relc_make_sym): Comment typo fixes.
1308 2007-03-08 Alan Modra <amodra@bigpond.net.au>
1310 * Makefile.am: Run "make dep-am".
1311 * Makefile.in: Regenerate.
1312 * po/POTFILES.in: Regenerate.
1314 2007-03-07 Joseph Myers <joseph@codesourcery.com>
1316 * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
1318 * doc/Makefile.am (gasver.texi): Define BUGURL.
1319 * doc/as.texinfo: Use BUGURL.
1320 * Makefile.in, configure, doc/Makefile.in: Regenerate.
1322 2007-03-06 Andreas Krebbel <krebbel1@de.ibm.com>
1324 * config/tc-s390.c (md_parse_option): z9-ec option added.
1326 2007-03-02 Paul Brook <paul@codesourcery.com>
1328 * config/tc-arm.c (relax_immediate): Always return positive values.
1329 (relaxed_symbol_addr): New function.
1330 (relax_adr, relax_branch): Use it.
1331 (arm_relax_frag): Pass strect argument. Adjust infinite loop check.
1333 2007-03-01 Joseph Myers <joseph@codesourcery.com>
1335 * as.c (parse_args): Update copyright date.
1337 2007-02-28 Nathan Sidwell <nathan@codesourcery.com>
1339 * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.
1341 2007-02-28 Nick Clifton <nickc@redhat.com>
1344 * config/tc-d10v.c (do_assemble): Do not generate error messages,
1345 just return -1 whenever a problem is encountered.
1346 (md_assemble): If do_assemble returns -1 generate a non-fatal
1347 error message and return.
1350 * config/tc-msp430.c (line_separator_char): Change to '{'.
1352 2007-02-27 Alan Modra <amodra@bigpond.net.au>
1354 * config/tc-m68hc11.c (fixup24): Correct fixup size.
1355 (build_jump_insn): Likewise.
1356 (build_insn): Likewise.
1357 (s_m68hc11_relax): Likewise.
1359 2007-02-27 Alan Modra <amodra@bigpond.net.au>
1361 * config/obj-elf.c (elf_frob_file): frag_wane any new frags.
1363 2007-02-25 Mark Shinwell <shinwell@codesourcery.com>
1365 * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.
1367 2007-02-23 Alan Modra <amodra@bigpond.net.au>
1369 * config/tc-mn10300.c (md_convert_frag): Correct fixup size.
1370 (md_assemble): Likewise.
1372 2007-02-22 Alan Modra <amodra@bigpond.net.au>
1374 * write.c (size_seg): Always clear SEC_RELOC here.
1375 (install_reloc): New function, extracted from..
1376 (write_relocs): ..here. Combine RELOC_EXPANSION_POSSIBLE code
1377 with !RELOC_EXPANSION_POSSIBLE code. Don't add fr_offset when
1378 testing frag size. Set SEC_RELOC here.
1380 2007-02-21 Alan Modra <amodra@bigpond.net.au>
1383 * config/tc-avr.h (TC_FX_SIZE_SLACK): Define.
1385 2007-02-20 Thiemo Seufer <ths@mips.com>
1387 * doc/c-mips.texi: Document 74kc, 74kf, 74kx.
1389 2007-02-20 Thiemo Seufer <ths@mips.com>
1391 * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.
1393 2007-02-20 Thiemo Seufer <ths@mips.com>
1394 Chao-Ying Fu <fu@mips.com>
1396 * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
1397 ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
1398 (macro_build): Add case '2'.
1399 (macro): Expand M_BALIGN to nop, packrl.ph or balign.
1400 (validate_mips_insn): Add support for balign instruction.
1401 (mips_ip): Handle DSP R2 instructions. Support balign instruction.
1402 (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
1403 md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
1404 command line options.
1405 (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
1406 (md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
1407 * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
1408 .set dspr2, .set nodspr2.
1410 2007-02-20 Nathan Sidwell <nathan@codesourcery.com>
1412 * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
1413 (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.
1415 2007-02-18 Alan Modra <amodra@bigpond.net.au>
1417 * write.c (TC_FX_SIZE_SLACK): Define.
1418 (write_relocs): Reinstate check for fixup within frag.
1419 * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
1420 * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
1421 * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
1422 * config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
1423 * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.
1425 2007-02-17 Mark Mitchell <mark@codesourcery.com>
1426 Nathan Sidwell <nathan@codesourcery.com>
1427 Vladimir Prus <vladimir@codesourcery.com
1428 Joseph Myers <joseph@codesourcery.com>
1430 * configure.in (--with-bugurl): New option.
1431 * configure: Regenerate.
1432 * dep-in.sed: Remove bin-bugs.h.
1433 * Makefile.am (REPORT_BUGS_TO): Define.
1434 (INCLUDES): Define REPORT_BUGS_TO.
1435 (DEP_INCLUDES): Likewise.
1436 ($(OBJS)): No longer depend on bin-bugs.h.
1437 * Makefile.in: Regenerate.
1438 * doc/Makefile.in: Regenerate.
1439 * as.c (show_usage): Don't print empty REPORT_BUGS_TO.
1440 * as.h: Remove include of bin-bugs.h.
1442 2007-02-17 Alan Modra <amodra@bigpond.net.au>
1444 * write.c: White space fixes.
1445 (fixup_segment): Move symbol_mri_common_p adjustments..
1446 (write_relocs): ..and symbol_equated_reloc_p adjustments..
1447 (adjust_reloc_syms): ..to here.
1449 2007-02-16 Alan Modra <amodra@bigpond.net.au>
1451 * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
1452 xmalloc, memset. Don't bother assigning NULL to known zero mem.
1453 (subseg_set_rest): Remove unnecessary cast.
1454 * write.c: Include libbfd.h. Replace PTR with void * throughout.
1455 Remove unnecessary forward declarations and casts.
1456 (set_symtab): Delete extern bfd_alloc.
1457 (fixup_segment): Move.
1459 2007-02-15 Nathan Sidwell <nathan@codesourcery.com>
1461 * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
1462 * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
1463 (mcf5475_ctrl, mcf5485_ctrl): New.
1464 (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
1465 (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
1466 (init_table): Add asid, mmubar, adjust rombar0.
1468 2007-02-14 Alan Modra <amodra@bigpond.net.au>
1470 * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
1471 * config/tc-i386.c: Wrap overly long lines, whitespace fixes.
1472 (process_operands): Move old Seg2ShortForm and Seg3ShortForm
1473 code, and test for these insns using a combination of
1474 opcode_modifier and operand_types.
1476 2007-02-07 Paul Brook <paul@codesourcery.com>
1478 * configure.tgt: Add arm*-*-uclinux-*eabi.
1480 2007-02-05 Dave Brolley <brolley@redhat.com>
1481 Richard Sandiford <rsandifo@redhat.com>
1482 DJ Delorie <dj@redhat.com>
1483 Stan Cox <scox@redhat.com>
1484 Jim Blandy <jimb@redhat.com>
1485 Nick Clifton <nickc@redhat.com>
1486 Jim Wilson <wilson@redhat.com>
1487 Frank Ch. Eigler <fche@redhat.com>
1488 Graydon Hoare <graydon@redhat.com>
1489 Ben Elliston <bje@redhat.com>
1490 John Healy <jhealy@redhat.com>
1491 Richard Henderson <rth@redhat.com>
1493 * Makefile.am (CPU_TYPES): Add mep.
1494 (TARGET_CPU_CFILES): Add tc-mep.c.
1495 (TARGET_CPU_HFILES): Add tc-mep.h.
1496 (DEPTC_mep_elf): New variable.
1497 (DEPTC_mep_coff): Likewise.
1498 (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
1499 * configure.in: Support mep.
1500 * configure.tgt: Likewise.
1501 * config/tc-mep.c: New file.
1502 * config/obj-elf.c: New file.
1503 * config/tc-mep.c: New file.
1504 * config/tc-mep.h: New file.
1505 * testsuite/gas/mep: New testsuite with content.
1506 * Makefile.in: Regenerate.
1507 * configure: Regenerate.
1509 2007-02-05 Dave Brolley <brolley@redhat.com>
1511 * cgen.c (gas_cgen_install_complex_reloc): Removed.
1512 (complex_reloc_installation_howto): Removed.
1514 2007-02-05 Dave Brolley <brolley@redhat.com>
1515 Graydon Hoare <graydon@redhat.com>
1516 DJ Delorie <dj@redhat.com>
1517 Catherine Moore <clm@redhat.com>
1518 Michael Chastain <chastain@redhat.com>
1519 Frank Ch. Eigler <fche@redhat.com>
1521 * symbols.c (use_complex_relocs_for): New, to decide
1522 when to use complex relocs. Add signed RELC support.
1523 (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
1524 encode expression symbols as mangled complex relocation symbols (when
1525 compiled with -DOBJ_COMPLEX_RELOC).
1526 (symbol_relc_make_sym,value,expr): New traversal/conversion routines.
1527 * cgen.c (gas_cgen_md_apply_fix3): Only set signed_p if RELC. Call
1528 encode_addend with new args. Modify to get start, length from
1529 ifield whenever it is set. Also change condition on which
1530 self-describing relocs are encoded. Add hook into
1531 gas_cgen_encode_addend.
1532 (queue_fixup_recursively): Add signed RELC support. Change from masked
1533 expr to trunc flag. Restore assignment of sub-field value to
1534 temporary in fixups array. Reflect changed meaning of last arg to
1535 queue_fixup_recursively.
1536 (fixup): Add cgen_maybe_multi_ifield member.
1537 (make_right_shifted_expr): New function.
1538 (queue_fixup): Change to recursive function that fragments
1539 fixups if operand has a multi-ifield.
1540 (gas_cgen_parse_operand): Add RELC code to wrap expressions in
1541 symbols, call weak_operand_overflow_check, and fragment call
1542 queue_fixup with operand fields.
1543 (gas_cgen_finish_insn) Modify to manage ifield pointer.
1544 (weak_operand_overflow_check): New function to try to select
1546 (gas_cgen_encode_addend): New function for relc.
1547 (gas_cgen_install_complex_reloc): Likewise.
1548 (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
1549 * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
1550 cgen_maybe_multi_ifield field to fx_cgen substructure.
1551 * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
1552 * symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
1554 2007-02-03 DJ Delorie <dj@delorie.com>
1556 * config/tc-m32c.c (m32c_cons_fix_new): New. Added to support 3
1558 * config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
1559 (m32c_cons_fix_new): Prototype.
1561 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1563 * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
1564 (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
1566 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1568 * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
1569 (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
1570 (map_suffix_reloc_to_operator): New.
1571 (map_operator_to_reloc): New.
1572 (expression_maybe_register): Fix incorrect test of return value from
1573 xtensa_elf_suffix. Rearrange to use map_suffix_reloc_to_operator.
1574 (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
1576 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1578 * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
1579 (tinsn_get_tok): Delete prototype.
1580 * config/tc-xtensa.c (tinsn_get_tok): Delete.
1582 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1584 * config/xtensa-relax.h (struct build_instr): Delete id field.
1585 * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
1587 (append_literal_op, append_label_op): Remove litnum/labnum arguments;
1588 set op_data fields to zero.
1589 (parse_id_constant): Delete.
1590 (build_transition): Remove code to handle numbered literals and labels.
1592 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1594 * config/xtensa-relax.c (build_transition): Remove code after as_fatal.
1595 (build_transition_table): Likewise.
1597 2007-02-01 Bob Wilson <bob.wilson@acm.org>
1599 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
1601 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.
1603 2007-02-02 Alan Modra <amodra@bigpond.net.au>
1605 * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
1606 (struct fix <fx_plt>): Rename to tcbit2.
1607 * write.c (fix_new_internal): Adjust.
1608 (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1609 * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1610 * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1611 * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1612 * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1613 * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1614 * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1615 * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1616 * config/tc-msp430.c (msp430_force_relocation_local): Likewise.
1617 * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
1618 * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1619 Instead, compare fx_r_type.
1620 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
1621 fx_tcbit in place of fx_plt.
1622 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
1623 * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
1626 2007-01-30 Nick Clifton <nickc@redhat.com>
1628 * as.c (main): Mark symbols created via the --defsym command line
1629 option as volatile so that they can be overridden later on by a
1630 .set directive. This maintains compatibility with the behaviour
1631 of earlier versions of the assembler.
1632 * doc/as.texinfo (--defsym): Document that the defined symbol's
1633 value can be overridden via a .set directive.
1635 2007-01-28 H.J. Lu <hongjiu.lu@intel.com>
1637 * config/tc-i386.c (swap_imm_operands): Renamed to ...
1638 (swap_2_operands): This. Take 2 ints.
1639 (md_assemble): Updated.
1640 (swap_operands): Call swap_2_operands to swap 2 operands.
1642 2007-01-24 DJ Delorie <dj@redhat.com>
1644 * config/tc-m32c.c (md_pseudo_table): Add .3byte.
1646 2007-01-22 Nick Clifton <nickc@redhat.com>
1649 * tc-score.c: Remove unnecessary uses of _().
1650 Make the err_msg[] a file level local array in order to save
1652 Remove unnecessary sprintf()s.
1654 2007-01-18 Mei Ligang <ligang@sunnorth.com.cn>
1657 * config/tc-score.c : Using _() for const string.
1658 Do not assign inst.error with a local string pointer.
1659 (md_section_align): Pad section.
1661 2007-01-13 H.J. Lu <hongjiu.lu@intel.com>
1663 * config/tc-i386.c (build_modrm_byte): Check number of operands
1664 when procssing memory/register operand.
1666 2007-01-12 Nick Clifton <nickc@redhat.com>
1669 * macro.c (expand_irp): Do not ignore spaces inside quoted
1672 2007-01-12 Alan Modra <amodra@bigpond.net.au>
1674 * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1675 * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1676 * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1677 (TC_FORCE_RELOCATION): Define.
1678 (TC_FORCE_RELOCATION_LOCAL): Define.
1679 * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.
1681 2007-01-12 Alan Modra <amodra@bigpond.net.au>
1683 * input-file.c (input_file_open): Check fgets return.
1685 2007-01-11 Paul Brook <paul@codesourcery.com>
1687 * config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
1689 2007-01-11 Nick Clifton <nickc@redhat.com>
1692 * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
1695 * config/tc-mcore.c (md_number_to_chars): Use
1696 number_to_chars_{big|little}endian.
1698 2007-01-08 Kazu Hirata <kazu@codesourcery.com>
1700 * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
1701 architecture by itself.
1702 (m68k_ip): Don't issue a warning for tbl instructions on fido.
1703 (m68k_elf_final_processing): Treat Fido as an architecture by
1706 2007-01-08 Kai Tietz <kai.tietz@onevision.com>
1708 * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
1710 2007-01-05 H.J. Lu <hongjiu.lu@intel.com>
1712 * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
1713 depending on allow_naked_reg.
1715 2007-01-04 Paul Brook <paul@codesourcery.com>
1717 * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.
1719 2007-01-04 H.J. Lu <hongjiu.lu@intel.com>
1722 * config/tc-i386.c (register_prefix): New.
1723 (set_intel_syntax): Set set_intel_syntax to "" if register
1724 prefix isn't needed.
1725 (check_byte_reg): Use register_prefix for error message.
1726 (check_long_reg): Likewise.
1727 (check_qword_reg): Likewise.
1728 (check_word_reg): Likewise.
1730 2007-01-04 Julian Brown <julian@codesourcery.com>
1732 * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
1733 (do_neon_qshl_imm): Likewise.
1734 (do_neon_rshl): New function. Handle rounding variants of
1735 v{q}shl-by-register.
1736 (insns): Use do_neon_rshl for vrshl, vqrshl.
1738 2007-01-04 Paul Brook <paul@codesourcery.com>
1740 * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
1743 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1745 * config/tc-i386.c (swap_operands): Remove branches.
1747 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1749 * config/tc-i386.c: Update copyright year.
1750 * config/tc-i386.h: Likewise.
1752 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1754 * config/tc-i386.c (smallest_imm_type): Return unsigned int
1757 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1759 * config/tc-i386.c: Convert to ISO C90 formatting
1760 * config/tc-i386.h: Likewise.
1762 2007-01-03 David Daney <ddaney@avtrex.com>
1764 * config/tc-mips.c (md_show_usage): Clean up -mno-shared
1767 For older changes see ChangeLog-2006
1773 version-control: never