1 2014-11-17 Ilya Tocar <ilya.tocar@intel.com>
3 * config/tc-i386.c (cpu_arch): Add .pcommit.
4 * doc/c-i386.texi: Document it.
6 2014-11-17 Ilya Tocar <ilya.tocar@intel.com>
8 * config/tc-i386.c (cpu_arch): Add .clwb.
9 * doc/c-i386.texi: Document it.
11 2014-11-14 H.J. Lu <hongjiu.lu@intel.com>
13 * config/tc-i386.c (cpu_arch): Re-arrange avx512* and xsave*
16 * doc/c-i386.texi: Re-arrange avx512* and xsave*. Add
17 clflushopt and se1. Remove duplicated entries.
19 2014-11-13 Marcus Shawcroft <marcus.shawcroft@arm.com>
22 * config/tc-aarch64.c (aarch64_cpus): Add CRC feature for
23 cortex-A53 and cortex-A57.
25 2014-11-12 Alan Modra <amodra@gmail.com>
28 * config/tc-i386.c (output_insn): Don't test x86_elf_abi when
31 2014-11-11 Nick Clifton <nickc@redhat.com>
33 * po/uk.po: Updated Ukranian translation.
35 2014-11-10 Matthew Fortune <matthew.fortune@imgtec.com>
38 * config/tc-mips.c (mips_elf_final_processing): Add INSN_ISA32R6
39 and INSN_ISA64R6 support.
41 2014-11-07 H.J. Lu <hongjiu.lu@intel.com>
44 2014-11-07 H.J. Lu <hongjiu.lu@intel.com>
47 * config/tc-i386.c (output_insn): Add a dummy REX_OPCODE prefix
48 for structions with R_X86_64_GOTTPOFF relocation for x32 if needed.
50 2014-11-03 Nick Clifton <nickc@redhat.com>
53 2014-11-03 Nick Clifton <nickc@redhat.com>
54 * config/tc-msp430.c (msp430_srcoperand): Fix range test for
57 2014-10-30 Nick Clifton <nickc@redhat.com>
60 2014-10-30 Dr Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
61 * config/tc-aarch64.h (MAX_MEM_FOR_RS_ALIGN_CODE): Define to 7.
62 * config/tc-aarch64.c (aarch64_handle_align): Rewrite to handle
63 large alignments with a constant fragment size of
64 MAX_MEM_FOR_RS_ALIGN_CODE.
66 2014-10-29 Nick Clifton <nickc@redhat.com>
68 * po/uk.po: New Ukranian translation.
70 2014-10-28 Matthew Fortune <matthew.fortune@imgtec.com>
73 2014-10-22 Matthew Fortune <matthew.fortune@imgtec.com>
74 * doc/as.texinfo: Update the MIPS FP ABI descriptions.
75 * doc/c-mips.texi: Spell check and correct throughout.
77 2014-10-28 Matthew Fortune <matthew.fortune@imgtec.com>
80 2014-10-21 Maciej W. Rozycki <macro@codesourcery.com>
81 * config/tc-mips.c (s_insn): Set file options.
83 2014-10-28 Matthew Fortune <matthew.fortune@imgtec.com>
86 2014-10-17 Matthew Fortune <matthew.fortune@imgtec.com>
87 * doc/c-mips.texi: Fix bad @value references.
89 2014-10-28 Alan Modra <amodra@gmail.com>
91 2014-10-18 Alan Modra <amodra@gmail.com>
93 * write.c (adjust_reloc_syms): Don't allow symbols in reg_section
94 to be reduced to reg_section section symbol.
95 * gas/config/tc-i386.c (i386_finalize_immediate): Reject all
96 reg_section immediates.
98 2014-10-15 Chen Gang <gang.chen.5i5j@gmail.com>
99 * config/tc-tic4x.c (md_assemble): Correct strncat size.
101 2014-10-15 Tristan Gingold <gingold@adacore.com>
103 * configure: Regenerate.
105 2014-10-14 Tristan Gingold <gingold@adacore.com>
107 * NEWS: Add marker for 2.25.
109 2014-10-14 Alan Modra <amodra@gmail.com>
112 * config/tc-i386.c (fits_in_signed_long): Use unsigned param and
113 expression to avoid signed overflow.
114 (fits_in_signed_byte, fits_in_unsigned_byte, fits_in_unsigned_word,
115 fits_in_signed_word, fits_in_unsigned_long): Similarly.
116 * expr.c (operand <'-'>): Avoid signed overflow.
117 * read.c (s_comm_internal): Likewise.
119 2014-10-14 Alan Modra <amodra@gmail.com>
121 * config/tc-sparc.c (sparc_md_end): Fix unused variable warnings.
123 2014-10-09 Jose E. Marchesi <jose.marchesi@oracle.com>
125 * config/tc-sparc.c (v9a_asr_table): Entry for %cps removed.
126 (sparc_arch_table): Remove the HWCAP_RANDOM, HWCAP_TRANS and
127 HWCAP_ASI_CACHE_SPARING from the architectures using them.
128 (HWS_V8): New define.
136 (sparc_arch): Use the HWS_* macros. Fix the `sparc4' architecture
137 to cover the HWCAP_ASI_BLK_INIT and HWCAP_IMA capabilities.
138 (hwcap_seen): Variable widened to 64 bits.
139 (hwcap_allowed): Likewise.
140 (sparc_arch): new field `hwcap2_allowed'.
141 (sparc_arch_table): provide hwcap2_allowed values for existing
143 (sparc_md_end): Add a HWCAPS2 object attribute to the elf object
144 in case any of the HWCAP2_* caps are used.
145 (sparc_ip): Take into account the new hwcaps2 bitmap to build the
146 list of seen/allowed hwcaps.
147 (get_hwcap_name): Argument widened to 64 bits to handle HWCAP2
149 (HWS_VM): New define.
151 (sparc_arch): New architectures `sparc5', `v9m' and `v8plusm'.
152 (v9a_asr_table): Add the %mwait (%asr28) ancillary state register
154 (sparc_ip): Handle the %mcdper ancillary state register as an
156 (sparc_ip): Handle } arguments as fdrd floating point registers
157 (double) that are the same than frs1.
158 * doc/c-sparc.texi (Sparc-Opts): Document the -Av9e, -Av8pluse and
159 -xarch=v9e command line options. Also fix the description of the
160 -Av9v and -Av8plusv command line options.
161 Document the -Av9m, -Av8plusm,-Asparc5, -xarch=v9m and
162 -xarch=sparc5 command line options.
164 2014-09-29 Terry Guo <terry.guo@arm.com>
166 * as.c (create_obj_attrs_section): Move it and call it from ...
167 * write.c (create_obj_attrs_section): ... here.
168 (subsegs_finish_section): Refactored.
170 2014-09-27 Alan Modra <amodra@gmail.com>
172 * dwarf2dbg.c (all_segs_hash): Delete.
173 (get_line_subseg): Delete last_seg, last_subseg, last_line_subseg.
174 Retrieve line_seg for section via seg_info.
175 * subsegs.h (segment_info_typet): Add dwarf2_line_seg.
177 2014-09-23 H.J. Lu <hongjiu.lu@intel.com>
180 * config/tc-i386.c (md_assemble): Disallow VEX/EVEX encoded
181 instructions in 16-bit mode.
183 2014-09-22 Alan Modra <amodra@gmail.com>
185 * config/tc-m68k.c (md_assemble): Add assert to work around
186 bogus trunk gcc warning.
187 * config/tc-pj.h (md_convert_frag): Warning fix.
188 * config/tc-xtensa.c (xg_assemble_vliw_tokens): Warning fix.
190 2014-09-17 Tristan Gingold <gingold@adacore.com>
192 * config/tc-arm.c (move_or_literal_pool, add_to_lit_pool): Use
193 bfd_int64_t instead of int64_t.
195 2014-09-16 Ilya Tocar <ilya.tocar@intel.com>
197 * config/tc-i386.c (evexrcig): New.
198 (build_evex_prefix): Force rounding bits.
199 (OPTION_MEVEXRCIG): New.
200 (md_longopts): Add mevexrcig.
201 (md_parse_option): Handle OPTION_MEVEXRCIG.
202 (md_show_usage): Document mevexrcig.
203 * doc/c-i386.texi (mevexrcig): Document new option.
205 2014-09-16 Kuan-Lin Chen <kuanlinchentw@gmail.com>
207 * config/tc-nds32.c (nds32_fsrs, nds32_fdrs, nds32_gprs): Remove.
208 (relax_table): Add new relaxation pattern.
209 (do_pseudo_la_internal, do_pseudo_ls_bhw): Expand for PIC suffix.
210 (do_pseudo_move, do_pseudo_neg, do_pseudo_pushpopm): Fix.
211 (get_range_type, nds32_elf_record_fixup_exp, nds32_get_align,
212 nds32_elf_build_relax_relation, md_assemble, invalid_prev_frag,
213 nds32_relax_frag, md_estimate_size_before_relax): Adjust relaxation.
214 (relocation_table): Remove.
215 (relax_ls_table): Load-store relaxation pattern.
216 (hint_map): Define-use chain pattern.
217 (nds32_find_reloc_table, nds32_match_hint_insn): Analysis
219 (nds32_parse_name): Parse PIC suffix.
220 * config/tc-nds32.h: Declare.
222 2014-09-15 H.J. Lu <hongjiu.lu@intel.com>
224 * config/tc-i386.c (OPTION_omit_lock_prefix): Renamed to ...
225 (OPTION_OMIT_LOCK_PREFIX): This.
226 (md_longopts): Updated.
227 (md_parse_option): Likewise.
229 2014-09-15 Andrew Bennett <andrew.bennett@imgtec.com>
230 Matthew Fortune <matthew.fortune@imgtec.com>
232 * config/tc-mips.c (mips_nan2008): New static global.
233 (mips_flag_nan2008): Removed.
234 (LL_SC_FMT): New define.
235 (COP12_FMT): Updated.
236 (ISA_IS_R6): New define.
237 (ISA_HAS_64BIT_REGS): Add mips64r6.
238 (ISA_HAS_DROR): Likewise.
239 (ISA_HAS_64BIT_FPRS): Add mips32r6 and mips64r6.
240 (ISA_HAS_ROR): Likewise.
241 (ISA_HAS_ODD_SINGLE_FPR): Likewise.
242 (ISA_HAS_MXHC1): Likewise.
243 (hilo_interlocks): Likewise.
244 (md_longopts): Likewise.
245 (ISA_HAS_LEGACY_NAN): New define.
246 (options): Add OPTION_MIPS32R6 and OPTION_MIPS64R6.
247 (mips_ase): Add field rem_rev.
248 (mips_ases): Updated to add which ISA an ASE was removed in.
249 (mips_isa_rev): Add support for mips32r6 and mips64r6.
250 (mips_check_isa_supports_ase): Add support to check if an ASE
251 has been removed in the specified MIPS ISA revision.
252 (validate_mips_insn): Skip '-' character.
253 (macro_build): Likewise.
254 (mips_check_options): Prevent R6 working with fp32, mips16,
255 micromips, or branch relaxation.
256 (file_mips_check_options): Set R6 floating point registers to
257 64 bit. Also deal with the nan2008 option.
258 (limited_pcrel_reloc_p): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
259 BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
260 BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
261 BFD_RELOC_LO16_PCREL.
262 (operand_reg_mask): Add support for OP_SAME_RS_RT, OP_CHECK_PREV
264 (match_check_prev_operand): New static function.
265 (match_same_rs_rt_operand): New static function.
266 (match_non_zero_reg_operand): New static function.
267 (match_operand): Added entries for: OP_SAME_RS_RT, OP_CHECK_PREV
269 (insns_between): Added case to deal with forbidden slots.
270 (append_insn): Added support for relocs: BFD_RELOC_MIPS_21_PCREL_S2
271 and BFD_RELOC_MIPS_26_PCREL_S2.
272 (match_insn): Add support for operands -A, -B, +' and +". Also
274 (mips_percent_op): Add entries for %pcrel_hi and %pcrel_lo.
275 (md_parse_option): Add support for mips32r6 and mips64r6. Also
276 update the nan option handling.
277 (md_pcrel_from): Add cases for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
278 BFD_RELOC_MIPS_26_PCREL_S2.
279 (mips_force_relocation): Prevent forced relaxation for MIPS r6.
280 (md_apply_fix): Add support for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
281 BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
282 BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
283 BFD_RELOC_LO16_PCREL.
284 (s_mipsset): Add support for mips32r6 and mips64r6.
285 (s_nan): Update to support the new nan2008 framework.
286 (tc_gen_reloc): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
287 BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
288 BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
289 BFD_RELOC_LO16_PCREL.
290 (mips_elf_final_processing): Updated to use the mips_nan2008.
291 (mips_cpu_info_table): Add entries for mips32r6 and mips64r6.
292 (macro): Enable ldc2, sdc2, ll, lld, swc2, sc, scd, cache, pref
294 (mips_fix_adjustable): Make PC relative R6 relocations relative
295 to the symbol and not the section.
296 * configure.ac: Add support for mips32r6 and mips64r6.
297 * configure: Regenerate.
298 * doc/c-mips.texi: Document the -mips32r6 and -mips64r6 command line
300 * doc/as.texinfo: Likewise.
302 2014-09-15 Matthew Fortune <matthew.fortune@imgtec.com>
304 * tc-mips.c (check_fpabi): Move softfloat and singlefloat
307 2014-09-12 Jose E. Marchesi <jose.marchesi@oracle.com>
309 * config/tc-sparc.c (sparc_ip): Update the set of allowed hwcaps
310 when bumping the current architecture.
311 (md_begin): Adjust the highetst architecture level also when a
312 specific architecture is not requested.
314 2014-09-12 Andrew Bennett <andrew.bennett@imgtec.com>
316 * configure.tgt: Add mips*-img-elf* target triple.
318 2014-09-12 Alan Modra <amodra@gmail.com>
320 * config/tc-i386.c (match_template): Remove redundant "!!" testing
321 single-bit bitfields.
322 (build_modrm_byte): Don't compare single-bit bitfields to "1".
324 2014-09-09 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
326 * config/tc-arm.c (arm_cpus): Add cortex-a17.
328 2014-09-03 Jiong Wang <jiong.wang@arm.com>
330 * config/tc-aarch64.c (parse_sys_reg): Remove the restriction on op0
333 2014-09-03 Jiong Wang <jiong.wang@arm.com>
335 * config/tc-aarch64.c (parse_operands): Recognize PAIRREG.
336 (aarch64_features): Add entry for lse extension.
338 2014-08-26 Jiong Wang <jiong.wang@arm.com>
340 * config/tc-arm.c (aeabi_set_public_attributes): Update selected_cpu
341 based on the info we got during parsing.
342 (arm_handle_align): Make sure the p2align expanding logic under thumb
345 2014-08-26 Maciej W. Rozycki <macro@codesourcery.com>
347 * config/tc-mips.c (macro) <M_SAA_AB>: Remove duplicate code and
349 <M_SAAD_AB>: ... here. Assert that !microMIPS.
351 2014-08-26 Jan-Benedict Glaw <jbglaw@lug-owl.de>
353 * config/tc-moxie.h (md_convert_frag): Silence warning.
355 2014-08-22 Richard Henderson <rth@redhat.com>
357 * config/tc-aarch64.c (tc_aarch64_regname_to_dw2regnum): Fix
358 register number for vector register types.
359 * config/tc-aarch64.h (DWARF2_LINE_MIN_INSN_LENGTH): Set to 4.
360 (DWARF2_CIE_DATA_ALIGNMENT): Set to -8.
362 2014-08-22 Maciej W. Rozycki <macro@codesourcery.com>
364 * config/tc-ppc.c (md_assemble): Only set the PPC_APUINFO_VLE
365 flag if both the processor and opcode flags match.
367 2014-08-22 Maciej W. Rozycki <macro@codesourcery.com>
369 * config/tc-arm.c (add_to_lit_pool): Preinitialize `imm1'.
371 2014-08-20 Maciej W. Rozycki <macro@codesourcery.com>
373 * dw2gencfi.c (make_debug_seg): Replace leading spaces with tabs.
374 (dot_cfi_val_encoded_addr, output_cfi_insn): Likewise.
375 (output_cie, cfi_change_reg_numbers, cfi_finish): Likewise.
377 2014-08-20 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
379 * config/tc-arm.c (parse_ifimm_zero): New function.
380 (enum operand_parse_code): Add OP_RSVD_FI0 value.
381 (parse_operands): Handle OP_RSVD_FI0.
382 (asm_opcode_insns): Use RSVD_FI0 for second operand of vcmp, vcmpe.
384 2014-08-20 Alan Modra <amodra@gmail.com>
386 * Makefile.am: Typo fix.
387 * Makefile.in: Regenerate.
388 * po/POTFILES.in: Regenerate.
390 2014-08-19 Andreas Tobler <andreast@fgznet.ch>
392 * Makefile.am: Add FreeBSD ARM support.
393 * Mafefile.in: Regenerate.
394 * configure.tgt: Add FreeBSD ARM support.
395 * config/te-armfbsdeabi.h: New file.
396 * config/te-armfbsdvfp.h: Likewise.
398 2014-08-19 Alan Modra <amodra@gmail.com>
400 * configure: Regenerate.
402 2014-08-18 Nick Clifton <nickc@redhat.com>
404 * config/tc-rl78.c (md_apply_fix): Correct handling of small sized
405 RELOC_RL78_DIFF fixups.
407 2014-08-18 Alan Modra <amodra@gmail.com>
409 * read.c (parse_mri_cons): Warning fix.
411 2014-08-14 Alan Modra <amodra@gmail.com>
413 * configure.ac: Move ACX_LARGEFILE after LT_INIT.
414 * config.in: Regenerate.
415 * configure: Regenerate.
417 2014-08-06 Ilya Tocar <ilya.tocar@intel.com>
419 * config/tc-i386.c (omit_lock_prefix): New.
420 (output_insn): Omit lock prefix if omit_lock_prefix is true.
421 (OPTION_omit_lock_prefix): New.
422 (md_longopts): Add momit-lock-prefix.
423 (md_parse_option): Handle momit-lock-prefix.
424 (md_show_usage): Add momit-lock-prefix=[no|yes].
425 * doc/c-i386.texi (momit-lock-prefix): Document.
427 2014-08-01 Takashi Yoshii <yoshii.takashi@renesas.com>
430 * config/tc-sh.c (tc_gen_reloc): Fix initialization of addend in
433 2014-07-29 Matthew Fortune <matthew.fortune@imgtec.com>
435 * config/tc-mips.c: Rename INSN_LOAD_COPROC_DELAY to INSN_LOAD_COPROC
436 and INSN_COPROC_MOVE_DELAY to INSN_COPROC_MOVE throughout.
438 2014-07-29 Matthew Fortune <matthew.fortune@imgtec.com>
440 * config/tc-mips.c (mips_flags_frag): New static global.
441 (struct mips_set_options): Add oddspreg field.
442 (file_mips_opts, mips_opts): Initialize oddspreg.
443 (ISA_HAS_ODD_SINGLE_FPR): Add CPU argument and update for R5900 and
445 (enum options, md_longopts, md_parse_option): Add -mfpxx, -modd-spreg
446 and -mno-odd-spreg options.
447 (md_begin): Create .MIPS.abiflags section.
448 (fpabi_incompatible_with, fpabi_requires): New static function.
449 (check_fpabi): Likewise.
450 (mips_check_options): Handle fp=xx and oddspreg restrictions.
451 (file_mips_check_options): Set oddspreg by default for fp=xx.
452 (mips_oddfpreg_ok): Re-write function.
453 (check_regno): Check odd numbered registers regardless of FPR size.
454 For fp != 32 use as_bad instead of as_warn.
455 (match_float_constant): Rewrite check regarding FP register width. Add
456 support for generating constants when MXHC1 is present. Handle fp=xx
457 to comply with the ABI.
458 (macro): Update M_LI_DD similarly to match_float_constant. Generate
459 MTHC1 when available. Check that correct code can be generated for
460 fp=xx and fp=64 ABIs.
461 (parse_code_option, s_mipsset): Add fp=xx, oddspreg and nooddspreg
463 (mips_convert_ase_flags): New static function.
464 (mips_elf_final_processing): Use fpabi == Val_GNU_MIPS_ABI_FP_OLD_64
465 to determine when to add the EF_MIPS_FP64 flag. Populate the
466 .MIPS.abiflags section.
467 (md_mips_end): Update .gnu_attribute based on command line and .module
468 as applicable. Use check_fpabi to ensure .gnu.attribute and command
469 line/.module options are consistent.
470 * doc/as.texinfo: Add missing -mgp64/-mfp64 options and document new
471 -mfpxx, -modd-spreg and -mno-odd-spreg options.
472 * doc/c-mips.texi: Document -mfpxx, -modd-spreg, -mno-odd-spreg,
473 gnu_attribute values and FP ABIs.
475 2014-07-27 Joel Sherrill <joel.sherrill@oarcorp.com>
477 Add RTEMS target support and simplify matching
479 * gas/configure.tgt (or1k*-*-rtems*): Ensure a match.
480 (or1k*-*-*): Use or1k* to match or1knd and or1kZ.
482 2014-07-27 Anthony Green <green@moxielogic.com>
484 * configure.tgt (generic_target): Add moxie-*-moxiebox*
485 * config/tc-moxie.c: Remove moxie_target_format.
486 (md_begin): Set default target_big_endian.
487 * config/tc-moxie.h: Only set TARGET_BYTES_BIG_ENDIAN if unset.
488 (TARGET_FORMAT): Set based on target_big_endian.
490 2014-07-26 Alan Modra <amodra@gmail.com>
492 * config/bfin-parse.y: Don't include obstack.h.
493 * config/obj-aout.c: Likewise.
494 * config/obj-coff.c: Likewise.
495 * config/obj-som.c: Likewise.
496 * config/tc-bfin.c: Likewise.
497 * config/tc-i960.c: Likewise.
498 * config/tc-rl78.c: Likewise.
499 * config/tc-rx.c: Likewise.
500 * config/tc-tic4x.c: Likewise.
502 * listing.c: Likewise.
503 * config/obj-elf.c (elf_file_symbol): Make name_length a size_t.
504 * config/tc-aarch64.c (symbol_locate): Likewise.
505 * config/tc-arm.c (symbol_locate): Likewise.
506 * config/tc-mmix.c (mmix_handle_mmixal): Make len_0 a size_t.
507 * config/tc-score.c (s3_build_score_ops_hsh): Make len a size_t.
508 (s3_build_dependency_insn_hsh): Likewise.
509 * config/tc-score7.c (s7_build_score_ops_hsh): Likewise.
510 (s7_build_dependency_insn_hsh): Likewise.
511 * frags.c (frag_grow): Make parameter a size_t, and use size_t locals.
512 (frag_new): Make parameter a size_t.
513 (frag_var_init): Make max_chars and var parameters size_t.
514 (frag_var, frag_variant): Likewise.
515 (frag_room): Return a size_t.
516 (frag_align_pattern): Make n_fill parameter a size_t.
517 * frags.h: Update function prototypes.
518 * symbols.c (save_symbol_name): Make name_length a size_t.
520 2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com>
521 Alexander Ivchenko <alexander.ivchenko@intel.com>
522 Maxim Kuznetsov <maxim.kuznetsov@intel.com>
523 Sergey Lega <sergey.s.lega@intel.com>
524 Anna Tikhonova <anna.tikhonova@intel.com>
525 Ilya Tocar <ilya.tocar@intel.com>
526 Andrey Turetskiy <andrey.turetskiy@intel.com>
527 Ilya Verbin <ilya.verbin@intel.com>
528 Kirill Yukhin <kirill.yukhin@intel.com>
529 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
531 * config/tc-i386.c (cpu_arch): Add .avx512dq, CPU_AVX512DQ_FLAGS.
532 * doc/c-i386.texi: Document avx512dq/.avx512dq.
534 2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com>
535 Alexander Ivchenko <alexander.ivchenko@intel.com>
536 Maxim Kuznetsov <maxim.kuznetsov@intel.com>
537 Sergey Lega <sergey.s.lega@intel.com>
538 Anna Tikhonova <anna.tikhonova@intel.com>
539 Ilya Tocar <ilya.tocar@intel.com>
540 Andrey Turetskiy <andrey.turetskiy@intel.com>
541 Ilya Verbin <ilya.verbin@intel.com>
542 Kirill Yukhin <kirill.yukhin@intel.com>
543 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
545 * config/tc-i386.c (cpu_arch): Add .avx512bw, CPU_AVX512BW_FLAGS.
546 * doc/c-i386.texi: Document avx512bw/.avx512bw.
548 2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com>
549 Alexander Ivchenko <alexander.ivchenko@intel.com>
550 Maxim Kuznetsov <maxim.kuznetsov@intel.com>
551 Sergey Lega <sergey.s.lega@intel.com>
552 Anna Tikhonova <anna.tikhonova@intel.com>
553 Ilya Tocar <ilya.tocar@intel.com>
554 Andrey Turetskiy <andrey.turetskiy@intel.com>
555 Ilya Verbin <ilya.verbin@intel.com>
556 Kirill Yukhin <kirill.yukhin@intel.com>
557 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
559 * config/tc-i386.c (cpu_arch): Add .avx512vl, CPU_AVX512VL_FLAGS.
560 (build_vex_prefix): Don't abort on VEX.W.
561 (check_VecOperands): Support BROADCAST_1TO4 and BROADCAST_1TO2.
562 (check_VecOperations): Ditto.
563 * doc/c-i386.texi: Document avx512vl/.avx512vl.
565 2014-07-21 Joel Sherrill <joel.sherrill@oarcorp.com>
567 Add or reactivate or1k-*-rtems*
568 * gas/configure.tgt (or1k-*-rtems*): Add.
570 2014-07-17 Ilya Tocar <ilya.tocar@intel.com>
572 * config/tc-i386.c (parse_register): Set need_vrex.
574 2014-07-15 Jiong Wang <jiong.wang@arm.com>
576 * config/tc-arm.c (add_to_lit_pool): Use "inst.operands[1].imm" for
577 sign extension. Casting the type of imm1 and imm2 to offsetT. Fix
578 one logic error when checking X_op.
580 2014-07-14 Andreas Schwab <schwab@linux-m68k.org>
582 * config/tc-m68k.c (md_convert_frag_1): Don't complain with
583 --pcrel about TAB (DBCCLBR, LONG) conversion.
585 2014-07-12 David Majnemer <david.majnemer@gmail.com>
587 * read.c (assign_symbol): Don't force "set" symbols local for PE.
589 2014-07-08 Jiong Wang <jiong.wang@arm.com>
591 * config/tc-arm.c (literal_pool): New field "alignment".
592 (find_or_make_literal_pool): Initialize "alignment" to 2.
593 (s_ltorg): Align the pool using value of "alignment"
594 (parse_big_immediate): New parameter "in_exp". Return
595 parsed expression if "in_exp" is not null.
596 (parse_address_main): Invoke "parse_big_immediate" for
598 (add_to_lit_pool): Add one parameter 'nbytes'.
599 Split 8 byte entry into two 4 byte entry.
600 Add padding to align 8 byte entry to 8 byte boundary.
601 (encode_arm_cp_address): Generate literal pool entry if possible.
602 (move_or_literal_pool): Generate entry for vldr case.
603 (enum lit_type): New enum type.
604 (do_ldst): Use new enum type.
605 (do_ldstv4): Likewise.
606 (do_t_ldst): Likewise.
607 (neon_write_immbits): Support Thumb-2 mode.
609 2014-07-07 Barney Stratford <barney_stratford@fastmail.fm>
611 * config/tc-avr.c (avr_operand): Permit referring to r26-r31 by
612 name as [xyz][hl]. Permit using a symbol whoes name begins with
613 ‘r’ to refer to a register.
614 Allow arbitrary expressions for the P and p operators.
615 (md_apply_fix): Check the BFD_RELOC_AVR_PORT5 and
616 BFD_RELOC_AVR_PORT6 relocations.
618 2014-07-04 Alan Modra <amodra@gmail.com>
620 * doc/internals.texi: Update "configure.in" comments.
621 * acinclude.m4: Likewise.
622 * config/tc-sparc.c: Likewise.
624 2014-07-04 Alan Modra <amodra@gmail.com>
626 * configure.ac: Rename from configure.in.
627 * Makefile.in: Regenerate.
628 * config.in: Regenerate.
629 * doc/Makefile.in: Regenerate.
631 2014-07-04 Alan Modra <amodra@gmail.com>
633 * doc/Makefile.am (CONFIG_STATUS_DEPENDENCIES): Delete.
634 * doc/Makefile.in: Regenerate.
636 2014-07-04 Alan Modra <amodra@gmail.com>
638 * configure.in: Include bfd/version.m4.
639 (AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
640 (BFD_VERSION): Delete.
641 * configure.com: Get bfd version from bfd/version.m4.
642 * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
643 * configure: Regenerate.
644 * Makefile.in: Regenerate.
645 * doc/Makefile.in: Regenerate.
647 2014-07-01 Barney Stratford <barney_stratford@fastmail.fm>
648 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
649 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
650 Soundararajan <Sounderarajan.D@atmel.com>
652 * config/tc-avr.c (mcu_types): Add avrtiny arch.
653 Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
655 (md_show_usage): Add avrtiny arch in usage message.
656 (avr_operand): validate and issue error for invalid register for
658 add new reloc exp for 16 bit lds/sts instruction.
659 (md_apply_fix): check 16 bit lds/sts operand for out of range and
661 (md_assemble): check ISA for arch and issue diagnostic.
662 * NEWS: Mention new support.
663 * doc/c-avr.texi: Document support for avrtiny architecture.
665 2014-06-27 Alan Modra <amodra@gmail.com>
667 * config/obj-macho.c (obj_mach_o_set_symbol_qualifier): Don't set
668 SYM_MACHO_FIELDS_NOT_VALIDATED after reporting an error.
669 (obj_mach_o_frob_label): Avoid cascading errors.
670 (obj_mach_o_frob_symbol): Don't set SYM_MACHO_FIELDS_NOT_VALIDATED.
672 2014-06-18 DJ Delorie <dj@redhat.com>
674 * config/rx-parse.y (BSET, BCLR, BTST, BNOT, BMCMD): Make .B
677 2014-06-17 Hans-Peter Nilsson <hp@bitrange.com>
679 * config/tc-mmix.c (loc_assert_s): New member frag.
681 (mmix_md_end): If an error is reported for a LOC expression, patch
684 2014-06-17 Chris Metcalf <cmetcalf@tilera.com>
687 * macro.c (buffer_and_nest): Honour #line directives inside
690 2014-06-17 Jiong Wang <jiong.wang@arm.com>
692 * config/tc-arm.c (depr_it_insns): New check for inc/dec sp.
694 2014-06-17 Hans-Peter Nilsson <hp@axis.com>
696 * config/tc-cris.c (cris_bad): New function.
697 (cris_process_instruction): Where applicable, use it instead of
700 2014-06-16 Nick Clifton <nickc@redhat.com>
702 * config/tc-aarch64.c (md_apply_fix): Ignore unused relocs.
704 2014-06-16 Jiong Wang <jiong.wang@arm.com>
706 * config/tc-aarch64.c (END_OF_INSN): New macro.
707 (parse_operands): Handle operand given and in wrong format when
710 2014-06-16 Alan Modra <amodra@gmail.com>
712 * write.h (subsegs_finish): Delete declaration.
713 * write.c (subsegs_finish): Make static.
714 (write_object_file): Call subsegs_finish from here. Don't print
715 warning and error count here..
716 * as.c (main): ..do so here instead. Remove dead code for "no
717 object file generated". Split out count strings to better support
718 internationalisation. Don't call subsegs_finish. Tidy setting of
719 "keep_it". Run write_object_file even after errors.
720 (keep_it): Make static.
721 * config/obj-elf.c (elf_frob_symbol): Remove assert.
722 (elf_frob_file_before_adjust): Likewise.
724 2014-06-16 Alan Modra <amodra@gmail.com>
726 * config/tc-dlx.c (machine_ip): Move initialisation of the_insn
729 2014-06-16 Alan Modra <amodra@gmail.com>
731 * config/tc-i386.c (reloc): Don't avoid pcrel check for
732 BFD_RELOC_SIZE64. Return NO_RELOC on failing pcrel check.
734 2014-06-16 Alan Modra <amodra@gmail.com>
736 * config/tc-tic6x.c (s_tic6x_ehtype): Clear after frag_more.
737 (tic6x_output_exidx_entry): Likewise.
738 (md_apply_fix): Simplify 1 byte md_number_to_chars.
740 2014-06-16 Alan Modra <amodra@gmail.com>
742 * config/tc-tic54x.c (tic54x_mlib): Don't write garbage past
743 end of archive to temp file.
744 (tic54x_start_line_hook): Start scan for parallel on next line,
745 not one char into next line (which may overrun the buffer).
747 2014-06-16 Alan Modra <amodra@gmail.com>
749 * config/tc-vax.c (md_apply_fix): Rewrite.
750 (tc_gen_reloc, vax_cons, vax_cons_fix_new): Style: Use NO_RELOC
751 define rather than the equivalent BFD_RELOC_NONE.
753 2014-06-16 Alan Modra <amodra@gmail.com>
755 * config/tc-arm.c (s_arm_elf_cons): Initialise after frag_more.
756 (md_apply_fix): Delete now unnecessary zeroing for BFD_RELOC_ARM_GOT*
757 and BFD_RELOC_ARM_TLS* relocs. Simplify BFD_RELOC_8 case.
759 2014-06-16 Alan Modra <amodra@gmail.com>
761 * config/tc-cris.c (md_create_long_jump): Follow "short" jump
762 with a nop rather than leaving uninitialised.
764 2014-06-13 Chen Gang <gang.chen.5i5j@gmail.com>
766 * config/tc-score7.c: Replace sprintf with strcpy where
768 (s7_b32_relax_to_b16): Use symbol_get_frag() to access a symbol's
770 * config/tc-score.c (s3_relax_branch_inst16): Likewise.
771 (s3_relax_cmpbranch_inst32): Likewise.
773 2014-06-07 Alan Modra <amodra@gmail.com>
775 * config/tc-ppc.c (ppc_insert_operand): Handle PPC_OPERAND_SIGNOPT
776 on unsigned fields. Comment on PPC_OPERAND_SIGNOPT signed fields
779 2014-06-02 Martin Storsjo <martin@martin.st>
781 * doc/c-aarch64.texi: Fix the documentation on :pg_hi21:.
783 2014-06-05 Joel Brobecker <brobecker@adacore.com>
785 * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
786 bfd's development.sh.
787 * Makefile.in, configure: Regenerate.
789 2014-06-03 Nick Clifton <nickc@redhat.com>
791 * config/tc-msp430.c (OPTION_WARN_INTR_NOPS): Use y instead of z.
792 (OPTION_NO_WARN_INTR_NOPS): Use Y instead of Z.
793 * doc/c-msp430.texi: Update command line option description.
795 2014-05-22 Alan Modra <amodra@gmail.com>
797 * listing.c (listing_warning, listing_error): Add space after colon.
798 * messages.c (as_warn_internal, as_bad_internal): Use the same
801 2014-05-20 Matthew Fortune <matthew.fortune@imgtec.com>
803 * config/tc-mips.c (file_mips_opts_checked): New static global.
804 (s_module): New static function.
806 (mips_pseudo_table): Add .module handler.
807 (mips_set_ase): Add opts argument and use instead of mips_opts.
808 (md_assemble): Use file_mips_check_options.
809 (md_parse_option): Update to use file_mips_opts instead of mips_opts.
810 (mips_set_architecture): Delete function. Moved to...
811 (mips_after_parse_args): Here. All logic now applies to
812 file_mips_opts first and then copies the final state to mips_opts.
813 Move error checking and defaults inference to mips_check_options and
814 file_mips_check_options.
815 (mips_check_options): New static function. Common option checking for
816 command line, .module and .set. Use .module values in error messages
817 instead of refering to command line options.
818 (file_mips_check_options): New static function. A wrapper for
819 mips_check_options with file_mips_opts. Updates BFD arch based on
821 (s_mipsset): Split into s_mipsset and parse_code_option. Settings
822 supported by both .set and .module are moved to parse_code_option.
823 Warnings and errors are kept in s_mipsset because when
824 parse_code_option is used with s_module the warnings are deferred
825 until code is generated. Any setting supporting 'default' value is
826 kept in s_mipsset as it is not applicable to s_module. Inferred
827 settings are also kept in s_mipsset as s_module does not infer any
828 settings. Use mips_check_options.
829 (parse_code_option): New static function derived from s_mipsset.
830 (s_module): New static function that implements .module. Allows file
831 level settings to be changed until code is generated.
832 (s_cpload, s_cpsetup, s_cplocal): Use file_mips_check_options.
833 (s_cprestore, s_cpreturn, s_cpadd, mips_address_bytes): Likewise.
834 (mips_elf_final_processing): Update file_ase to file_mips_opts.ase.
835 (md_mips_end): Use file_mips_check_options.
836 * doc/c-mips.texi: Document .module.
838 2014-05-20 Matthew Fortune <matthew.fortune@imgtec.com>
840 * messages.c (as_warn_internal): Remove extra whitespace from
843 2014-05-20 Matthew Fortune <matthew.fortune@imgtec.com>
845 * config/tc-mips.c (FP64_ASES): Add ASE_MSA.
846 (mips_after_parse_args): Do not select ASE_MSA without -mfp64.
848 2014-05-20 Mike Stump <mikestump@comcast.net>
850 * messages.c (as_warn_internal): Ensure we don't interleave output
851 within a single line when make -j is used.
852 (as_bad_internal): Likewise.
854 2014-05-20 Richard Sandiford <rdsandiford@googlemail.com>
856 * config/obj-elf.h (obj_elf_seen_attribute): Declare.
857 * config/obj-elf.c (recorded_attribute_info): New structure.
858 (recorded_attributes): New variable.
859 (record_attribute, obj_elf_seen_attribute): New functions.
860 (obj_elf_vendor_attribute): Record which attributes have been seen.
862 2014-05-20 Nick Clifton <nickc@redhat.com>
864 * config/tc-msp430.c (CHECK_RELOC_MSP430): Add OP parameter.
865 Generate BFD_RELOC_MSP430_ABS_HI16 if vshift is 1.
866 (msp430_srcoperand): Store vshift value in operand.
868 2014-05-19 Nick Clifton <nickc@redhat.com>
871 * config/tc-i386.c (md_apply_fix): Improve the detection of code
872 symbols for 32-bit PE targets.
874 2014-05-18 Richard Sandiford <rdsandiford@googlemail.com>
876 * config/tc-mips.c (md_obj_begin): Delete.
877 (md_obj_end): Fold into...
878 (md_mips_end): ...here. Move to end of file.
880 2014-05-17 Nick Clifton <nickc@redhat.com>
883 * config/tc-v850.c (handle_ctoff): Generate an error if called
884 when using the RH850 ABI.
886 2014-05-16 Kaushik Phata <Kaushik.Phatak@kpit.com>
888 * config/tc-rl78.c (enum options): Add OPTION_32BIT_DOUBLES
889 and OPTION_64BIT_DOUBLES.
890 (md_longopts): Add -m32bit-doubles and -m64bit-doubles.
891 (md_parse_option): Parse -m32bit-doubles and -m64bit-doubles.
892 (md_show_usage): Show all of the RL78 options.
893 (rl78_float_cons): New static functions.
894 (md_pseudo_table): Update handler for "double".
895 * doc/c-rl78.texi: Document new options.
896 * doc/as.texinfo: Likewise.
898 2014-05-13 Matthew Fortune <matthew.fortune@imgtec.com>
900 * config/tc-mips.c (mips_set_options): Rename gp32 to gp throughout.
901 (HAVE_32BIT_GPRS, HAVE_64BIT_GPRS): Remove. Re-implement via GPR_SIZE.
902 (HAVE_32BIT_FPRS, HAVE_64BIT_FPRS): Remove. Re-implement via FPR_SIZE.
903 (GPR_SIZE, FPR_SIZE): New macros. Use throughout.
905 2014-05-08 Matthew Fortune <matthew.fortune@imgtec.com>
907 * config/tc-mips.c (md_parse_option): Update missed file_mips_isa
910 2014-05-08 Matthew Fortune <matthew.fortune@imgtec.com>
912 * config/tc-mips.c (mips_set_options): Rename fp32 field to fp.
913 Update fp32 == 0 to fp == 64 and fp32 == 1 to fp != 64 throughout.
914 (file_mips_gp32, file_mips_fp32, file_mips_soft_float,
915 file_mips_single_float, file_mips_isa, file_mips_arch): Merge into
917 (file_mips_opts): Here. New static global. Update throughout.
918 (mips_opts): Update defaults for gp32 and fp.
920 2014-05-08 Matthew Fortune <matthew.fortune@imgtec.com>
922 * config/tc-mips.c (streq): Define.
923 (mips_convert_symbolic_attribute): New function.
924 * config/tc-mips.h (CONVERT_SYMBOLIC_ATTRIBUTE): Define.
925 (mips_convert_symbolic_attribute): New prototype.
927 2014-05-02 Max Filippov <jcmvbkbc@gmail.com>
929 * config/tc-xtensa.c (md_apply_fix): mark BFD_RELOC_XTENSA_DIFF*
932 2014-05-07 Andrew Bennett <andrew.bennett@imgtec.com>
934 * tc-mips.c (ISA_SUPPORTS_MIPS16E): Add mips32r3, mips32r5, mips64r3
936 (ISA_HAS_64BIT_FPRS): Likewise.
937 (ISA_HAS_ROR): Likewise.
938 (ISA_HAS_ODD_SINGLE_FPR): Likewise.
939 (ISA_HAS_MXHC1): Likewise.
940 (hilo_interlocks): Likewise.
941 (md_longopts): Likewise.
942 (ISA_HAS_64BIT_REGS): Add mips64r3 and mips64r5.
943 (ISA_HAS_DROR): Likewise.
944 (options): Add OPTION_MIPS32R3, OPTION_MIPS32R5, OPTION_MIPS64R3, and
946 (mips_isa_rev): Add support for mips32r3, mips32r5, mips64r3 and
948 (md_parse_option): Likewise.
949 (s_mipsset): Likewise.
950 (mips_cpu_info_table): Add entries for mips32r3, mips32r5, mips64r3
951 and mips64r5. Also change p5600 entry to be mips32r5.
952 * configure.in: Add support for mips32r3, mips32r5, mips64r3 and
954 * configure: Regenerate.
955 * doc/c-mips.texi: Document the -mips32r3, -mips32r5, -mips64r3 and
956 -mips64r5 command line options.
957 * doc/as.texinfo: Likewise.
959 2014-04-28 Nick Clifton <nickc@redhat.com>
962 * config/tc-i386.c (md_apply_fix): Do not adjust value of
963 pc-relative fixes against weak symbols.
965 2014-04-26 Alan Modra <amodra@gmail.com>
967 * po/POTFILES.in: Regenerate.
969 2014-04-24 Nick Clifton <nickc@redhat.com>
971 * config/tc-arm.c (s_ltorg): Only create a mapping symbol for ELF
974 2014-04-23 Will Newton <will.newton@linaro.org>
976 * config/tc-arm.c (s_ltorg): Call make_mapping_symbol
977 directly instead of mapping_state.
979 2014-04-23 Andrew Bennett <andrew.bennett@imgtec.com>
981 * config/tc-mips.c (options): Add OPTION_XPA and OPTION_NO_XPA.
982 (md_longopts): Add xpa and no-xpa command line options.
983 (mips_ases): Add MIPS XPA ASE.
984 (mips_cpu_info_table): Update p5600 entry to allow the XPA ASE.
985 * doc/as.texinfo: Document the MIPS XPA command line options.
986 * doc/c-mips.texi: Document the MIPS XPA command line options,
987 and assembler directives.
989 2014-04-22 Sandra Loosemore <sandra@codesourcery.com>
991 * config/tc-nios2.c (nios2_consume_arg): Add case for 'E' to
992 unbreak self-test mode.
994 2014-04-22 Max Filippov <jcmvbkbc@gmail.com>
996 * config/tc-xtensa.c (xtensa_handle_align): record alignment for the
999 2014-04-22 Christian Svensson <blue@cmd.nu>
1001 * Makefile.am: Remove openrisc and or32 support. Add support for or1k.
1002 * configure.in: Likewise.
1003 * configure.tgt: Likewise.
1004 * doc/as.texinfo: Likewise.
1005 * config/obj-coff.h: Likewise.
1006 * config/tc-or1k.c: New file.
1007 * config/tc-or1k.h: New file.
1008 * config/tc-openrisc.c: Delete.
1009 * config/tc-openrisc.h: Delete.
1010 * config/tc-or32.c: Delete.
1011 * config/tc-or32.h: Delete.
1012 * Makefile.in: Regenerate.
1013 * configure: Regenerate.
1015 2014-04-16 Alan Modra <amodra@gmail.com>
1017 * config/tc-tilegx.h (TC_CONS_FIX_NEW): Add RELOC arg.
1018 * config/tc-tilepro.h (TC_CONS_FIX_NEW): Likewise.
1020 2014-04-10 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
1022 * config/tc-avr.c: Add new flag mlink-relax.
1023 (md_show_usage): Add flag and help text.
1024 (md_parse_option): Record whether link relax is turned on.
1025 (relaxable_section): New.
1026 (avr_validate_fix_sub): New.
1027 (avr_force_relocation): New.
1028 (md_apply_fix): Generate DIFF reloc.
1029 (avr_allow_local_subtract): New.
1031 * config/tc-avr.h (TC_LINKRELAX_FIXUP): Define to 0.
1032 (TC_FORCE_RELOCATION): Define.
1033 (TC_FORCE_RELOCATION_SUB_SAME): Define.
1034 (TC_VALIDATE_FIX_SUB): Define.
1035 (avr_force_relocation): Declare.
1036 (avr_validate_fix_sub): Declare.
1037 (md_allow_local_subtract): Define.
1038 (avr_allow_local_subtract): Declare.
1040 2014-04-10 Andrew Bennett <andrew.bennett@imgtec.com>
1042 * config/tc-mips.c (mips_cpu_info_table): Add P5600
1044 * doc/c-mips.texi: Document p5600.
1046 2014-04-09 Nick Clifton <nickc@redhat.com>
1048 * config/tc-rl78.h (TC_CONS_FIX_NEW): Add RELOC parameter.
1049 * config/tc-z80.h (TC_CONS_FIX_NEW): Discard RELOC parameter.
1050 * config/tc-aarch64.h (TC_CONS_FIX_NEW): Discard RELOC parameter.
1051 * read.c (emit_expr_fix): Mark the r parameter as potentially
1054 2014-04-09 Alan Modra <amodra@gmail.com>
1056 * config/tc-ppc.c (warn_476, last_insn, last_seg, last_subseg):
1058 (md_longopts, md_parse_option, md_show_usage): Add --ppc476-workaround.
1059 (ppc_elf_cons_fix_check): New function.
1060 (md_assemble): Set last_insn, last_seg, last_subseg.
1061 (ppc_byte, md_apply_fix): Handle warn_476.
1062 * config/tc-ppc.h (TC_CONS_FIX_CHECK): Define.
1063 (ppc_elf_cons_fix_check): Declare.
1064 * read.c (cons_worker): Invoke TC_CONS_FIX_CHECK.
1066 2014-04-09 Alan Modra <amodra@gmail.com>
1068 * gas/config/tc-alpha.h (TC_CONS_FIX_NEW): Add RELOC parameter.
1069 * gas/config/tc-arc.c (arc_cons_fix_new): Add reloc parameter.
1070 * gas/config/tc-arc.h (arc_cons_fix_new): Update prototype.
1071 (TC_CONS_FIX_NEW): Add RELOC parameter.
1072 * gas/config/tc-arm.c (cons_fix_new_arm): Similarly
1073 * gas/config/tc-arm.h (cons_fix_new_arm, TC_CONS_FIX_NEW): Similarly.
1074 * gas/config/tc-cr16.c (cr16_cons_fix_new): Similarly.
1075 * gas/config/tc-cr16.h (cr16_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
1076 * gas/config/tc-crx.h (TC_CONS_FIX_NEW): Similarly.
1077 * gas/config/tc-m32c.c (m32c_cons_fix_new): Similarly.
1078 * gas/config/tc-m32c.h (m32c_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
1079 * gas/config/tc-mn10300.c (mn10300_cons_fix_new): Similarly.
1080 * gas/config/tc-mn10300.h (mn10300_cons_fix_new, TC_CONS_FIX_NEW):
1082 * gas/config/tc-ns32k.c (cons_fix_new_ns32k): Similarly.
1083 * gas/config/tc-ns32k.h (cons_fix_new_ns32k): Similarly.
1084 * gas/config/tc-pj.c (pj_cons_fix_new_pj): Similarly.
1085 * gas/config/tc-pj.h (pj_cons_fix_new_pj, TC_CONS_FIX_NEW): Similarly.
1086 * gas/config/tc-rx.c (rx_cons_fix_new): Similarly.
1087 * gas/config/tc-rx.h (rx_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
1088 * gas/config/tc-sh.c (sh_cons_fix_new): Similarly.
1089 * gas/config/tc-sh.h (sh_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
1090 * gas/config/tc-tic54x.c (tic54x_cons_fix_new): Similarly.
1091 * gas/config/tc-tic54x.h (tic54x_cons_fix_new, TC_CONS_FIX_NEW):
1093 * gas/config/tc-tic6x.c (tic6x_cons_fix_new): Similarly.
1094 * gas/config/tc-tic6x.h (tic6x_cons_fix_new, TC_CONS_FIX_NEW):
1096 * gas/config/tc-arc.c (arc_parse_cons_expression): Return reloc.
1097 * gas/config/tc-arc.h (arc_parse_cons_expression): Update proto.
1098 * gas/config/tc-avr.c (exp_mod_data): Make global.
1099 (pexp_mod_data): Delete.
1100 (avr_parse_cons_expression): Return exp_mod_data pointer.
1101 (avr_cons_fix_new): Add exp_mod_data_t pointer param.
1102 (exp_mod_data_t): Move typedef..
1103 * gas/config/tc-avr.h: ..to here.
1104 (exp_mod_data): Declare.
1105 (TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define.
1106 (avr_parse_cons_expression, avr_cons_fix_new): Update prototype.
1107 (TC_CONS_FIX_NEW): Update.
1108 * gas/config/tc-hppa.c (hppa_field_selector): Delete static var.
1109 (cons_fix_new_hppa): Add hppa_field_selector param.
1110 (fix_new_hppa): Adjust.
1111 (parse_cons_expression_hppa): Return field selector.
1112 * gas/config/tc-hppa.h (parse_cons_expression_hppa): Update proto.
1113 (cons_fix_new_hppa): Likewise.
1114 (TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define.
1115 * gas/config/tc-i386.c (got_reloc): Delete static var.
1116 (x86_cons_fix_new): Add reloc param.
1117 (x86_cons): Return got reloc.
1118 * gas/config/tc-i386.h (x86_cons, x86_cons_fix_new): Update proto.
1119 (TC_CONS_FIX_NEW): Add RELOC param.
1120 * gas/config/tc-ia64.c (ia64_cons_fix_new): Add reloc param. Adjust
1122 * gas/config/tc-ia64.h (ia64_cons_fix_new): Update prototype.
1123 (TC_CONS_FIX_NEW): Add reloc param.
1124 * gas/config/tc-microblaze.c (parse_cons_expression_microblaze):
1126 (cons_fix_new_microblaze): Add reloc param.
1127 * gas/config/tc-microblaze.h: Formatting.
1128 (parse_cons_expression_microblaze): Update proto.
1129 (cons_fix_new_microblaze): Likewise.
1130 * gas/config/tc-nios2.c (nios2_tls_ldo_reloc): Delete static var.
1131 (nios2_cons): Return ldo reloc.
1132 (nios2_cons_fix_new): Delete.
1133 * gas/config/tc-nios2.h (nios2_cons): Update prototype.
1134 (nios2_cons_fix_new, TC_CONS_FIX_NEW): Delete.
1135 * gas/config/tc-ppc.c (md_pseudo_table): Remove quad, long, word,
1136 short. Make llong use cons.
1137 (ppc_elf_suffix): Return BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
1138 (ppc_elf_cons): Delete.
1139 (ppc_elf_parse_cons): New function.
1140 (ppc_elf_validate_fix): Don't check for BFD_RELOC_UNUSED.
1141 (md_assemble): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
1142 * gas/config/tc-ppc.h (TC_PARSE_CONS_EXPRESSION): Define
1143 (ppc_elf_parse_cons): Declare.
1144 * gas/config/tc-sparc.c (sparc_cons_special_reloc): Delete static var.
1145 (sparc_cons): Return reloc specifier.
1146 (cons_fix_new_sparc): Add reloc specifier param.
1147 (sparc_cfi_emit_pcrel_expr): Use emit_expr_with_reloc.
1148 * gas/config/tc-sparc.h (TC_PARSE_CONS_RETURN_TYPE): Define.
1149 (TC_PARSE_CONS_RETURN_NONE): Define.
1150 (sparc_cons, cons_fix_new_sparc): Update prototype.
1151 * gas/config/tc-v850.c (hold_cons_reloc): Delete static var.
1152 (v850_reloc_prefix): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
1153 (md_assemble): Likewise.
1154 (parse_cons_expression_v850): Return reloc.
1155 (cons_fix_new_v850): Add reloc parameter.
1156 * gas/config/tc-v850.h (parse_cons_expression_v850): Update proto.
1157 (cons_fix_new_v850): Likewise.
1158 * gas/config/tc-vax.c (vax_cons_special_reloc): Delete static var.
1159 (vax_cons): Return reloc.
1160 (vax_cons_fix_new): Add reloc parameter.
1161 * gas/config/tc-vax.h (vax_cons, vax_cons_fix_new): Update proto.
1162 * gas/config/tc-xstormy16.c (xstormy16_cons_fix_new): Add reloc param.
1163 * gas/config/tc-xstormy16.h (xstormy16_cons_fix_new): Update proto.
1164 * gas/dwarf2dbg.c (TC_PARSE_CONS_RETURN_NONE): Provide default.
1165 (emit_fixed_inc_line_addr): Adjust exmit_expr_fix calls.
1166 * gas/read.c (TC_PARSE_CONS_EXPRESSION): Return value.
1167 (do_parse_cons_expression): Adjust.
1168 (cons_worker): Pass return value from TC_PARSE_CONS_EXPRESSION
1169 to emit_expr_with_reloc.
1170 (emit_expr_with_reloc): New function handling reloc, mostly
1172 (emit_expr): ..here.
1173 (emit_expr_fix): Add reloc param. Adjust TC_CONS_FIX_NEW invocation.
1175 (parse_mri_cons): Convert to ISO.
1176 * gas/read.h (TC_PARSE_CONS_RETURN_TYPE): Define.
1177 (TC_PARSE_CONS_RETURN_NONE): Define.
1178 (emit_expr_with_reloc): Declare.
1179 (emit_expr_fix): Update prototype.
1180 * gas/write.c (write_object_file): Update TC_CONS_FIX_NEW invocation.
1182 2014-04-03 Ilya Tocar <ilya.tocar@intel.com>
1184 * config/tc-i386.c (cpu_arch): Add .se1.
1185 * doc/c-i386.texi: Document .se1/se1.
1187 2014-04-02 DJ Delorie <dj@redhat.com>
1189 * config/tc-rl78.c (md_apply_fix): Add overflow warnings for
1190 pc-relative branches.
1192 2014-04-02 Nick Clifton <nickc@redhat.com>
1195 * config/tc-arm.c (create_unwind_entry): Report an error if an
1196 attempt to recreate an unwind directive is encountered.
1198 2014-03-27 Nick Clifton <nickc@redhat.com>
1200 * config/tc-score.c (s3_parse_pce_inst): Add "%s" parameter to
1201 sprintf in order to avoid a compile time warning.
1203 2014-03-26 Nick Clifton <nickc@redhat.com>
1205 * config/tc-rl78.c (rl78_op): Issue an error message if a 16-bit
1206 relocation is used on an 8-bit operand or vice versa.
1207 (tc_gen_reloc): Use the RL78_16U relocation for RL78_CODE.
1208 (md_apply_fix): Add support for RL78_HI8, RL78_HI16 and RL78_LO16.
1210 2014-03-25 Nick Clifton <nickc@redhat.com>
1212 * config/obj-coff-seh.c (obj_coff_seh_code): New function -
1213 switches the current segment back to the code segment recorded
1214 when seh_proc was last invoked.
1215 * config/obj-coff-seh.h (SEH_CMDS): Add seh_code.
1217 2014-03-25 Alan Modra <amodra@gmail.com>
1219 * config/tc-ppc.c (ppc_is_toc_sym): Revert 2014-03-05.
1220 (md_assemble): Likewise. Warn.
1222 2014-03-21 David Weatherford <weath@cadence.com>
1223 Max Filippov <jcmvbkbc@gmail.com>
1225 * config/tc-xtensa.c (xtensa_check_frag_count)
1226 xtensa_create_trampoline_frag,
1227 xtensa_maybe_create_trampoline_frag, init_trampoline_frag,
1228 find_trampoline_seg, search_trampolines, get_best_trampoline,
1229 check_and_update_trampolines, add_jump_to_trampoline,
1230 dump_trampolines): New functions.
1231 (md_parse_option): Add cases for --[no-]trampolines options.
1232 (md_assemble, finish_vinsn, xtensa_end): Add call to
1233 xtensa_check_frag_count.
1234 (xg_assemble_vliw_tokens): Add call to
1235 xtensa_maybe_create_trampoline_frag.
1236 (xtensa_relax_frag): Relax fragments with RELAX_TRAMPOLINE state.
1237 (relax_frag_immed): Relax jump instructions that cannot reach its
1239 * config/tc-xtensa.h (xtensa_relax_statesE::RELAX_TRAMPOLINE): New
1241 * doc/as.texinfo: Document --[no-]trampolines command-line options.
1242 * doc/c-xtensa.texi: Document trampolines relaxation and command
1244 * frags.c (get_frag_count, clear_frag_count): New function.
1245 (frag_alloc): Increment totalfrags counter.
1246 * frags.h (get_frag_count, clear_frag_count): New function.
1248 2014-03-20 DJ Delorie <dj@redhat.com>
1250 * config/rl78-defs.h (RL78_RELAX_NONE, RL78_RELAX_BRANCH): Add.
1251 * config/rl78-parse.y (BC, BNC, BZ, BNZ, BH, BHZ, bt_bf): Call
1253 * config/tc-rl78.h (md_relax_frag): Define.
1254 (rl78_relax_frag): Declare.
1255 * config/tc-rl78.c (rl78_relax): Add.
1256 (md_assemble): Set up the variable frags also when relaxing.
1258 (rl78_opcode_type): New.
1259 (rl78_frag_fix_value): New.
1260 (md_estimate_size_before_relax): New-ish.
1261 (rl78_relax_frag): New.
1262 (md_convert_frag): New-ish.
1264 2014-03-20 Richard Sandiford <rdsandiford@googlemail.com>
1266 * config/tc-mips.h (DIFF_EXPR_OK, CFI_DIFF_EXPR_OK): Define.
1267 * config/tc-mips.c (md_pcrel_from): Remove error message.
1268 (md_apply_fix): Convert PC-relative BFD_RELOC_32s to
1269 BFD_RELOC_32_PCREL. Report a specific error message for unhandled
1270 PC-relative expressions. Handle BFD_RELOC_8.
1272 2014-03-19 Jose E. Marchesi <jose.marchesi@oracle.com>
1274 * config/tc-sparc.c (hpriv_reg_table): Added entries for
1275 %hstick_offset and %hstick_enable.
1276 * doc/c-sparc.texi (Sparc-Regs): Document the %hstick_offset and
1277 %hstick_enable hyperprivileged registers.
1279 2014-03-19 Daniel Gutson <daniel.gutson@tallertechnologies.com>
1280 Nick Clifton <nickc@redhat.com>
1282 * config/tc-arm.c (codecomposer_syntax): New flag that states whether the
1283 CCS syntax compatibility mode is on or off.
1284 (asmfunc_states): New enum to represent the asmfunc directive state.
1285 (asmfunc_state): New variable holding the asmfunc directive state.
1286 (comment_chars): Rename to arm_comment_chars.
1287 (line_separator_chars): Rename to arm_line_separator_chars.
1288 (s_ccs_ref): New function that handles the .ref directive.
1289 (asmfunc_debug): New function.
1290 (s_ccs_asmfunc): New function that handles the .asmfunc directive.
1291 (s_ccs_endasmfunc): New function that handles the .endasmfunc directive.
1292 (s_ccs_def): New function that handles the .def directive.
1293 (tc_start_label_without_colon): New function.
1294 (md_pseudo_table): Added new CCS directives.
1295 (arm_ccs_mode): New function that handles the -mccs command line option.
1296 (arm_long_opts): Added new -mccs command line option.
1297 * config/tc-arm.h (LABELS_WITHOUT_COLONS): New macro.
1298 (TC_START_LABEL_WITHOUT_COLON): New macro.
1299 (tc_start_label_without_colon): Added extern function declaration.
1300 (tc_comment_chars): Define.
1301 (tc_line_separator_chars): Define.
1302 * app.c (do_scrub_begin): Use tc_line_separator_chars, if defined.
1303 * read.c (read_begin): Likewise.
1304 * doc/as.texinfo: Add documentation for the -mccs command line
1306 * doc/c-arm.texi: Likewise.
1307 * doc/internals.texi: Document tc_line_separator_chars.
1308 * NEWS: Mention the new feature.
1310 2014-03-18 Jiong Wang <jiong.wang@arm.com>
1312 * config/tc-aarch64.c (aarch64_opts): Add new option
1313 "mno-verbose-error".
1314 (verbose_error_p): Initialize to 1.
1315 * doc/c-aarch64.texi (AArch64 Options): Document -mverbose-error
1316 and -mno-verbose-error.
1318 2014-03-17 Nick Clifton <nickc@redhat.com>
1321 * config/tc-arm.c (tc_arm_regname_to_dw2regnum): Parse VFP
1324 2014-03-13 Richard Earnshaw <rearnsha@arm.com>
1325 Jiong Wang <Jiong.Wang@arm.com>
1327 * doc/c-aarch64.texi: Clean up some formatting issues.
1328 (AArch64 Options): Document -mcpu and -march.
1329 (AArch64 Extensions): New node.
1331 2014-03-13 Tristan Gingold <gingold@adacore.com>
1333 * config/tc-i386.c (use_big_obj): Declare.
1334 (OPTION_MBIG_OBJ): Define.
1335 (md_longopts): Add -mbig-obj option.
1336 (md_parse_option): Handle it.
1337 (md_show_usage): Display help for this option.
1338 (i386_target_format): Use bigobj for x86-64 if -mbig-obj.
1339 * doc/c-i386.texi: Document the option.
1341 2014-03-12 Nick Clifton <nickc@redhat.com>
1344 * config/tc-aarch64.c (literal_expression): New structure.
1345 (literal_pool): Replace exp array with literal_expression array.
1346 (add_to_lit_pool): When adding a bignum cache the big value.
1347 (s_ltorg): When emitting a bignum initialise the global bignum
1348 array from the cached value.
1350 2014-03-12 Alan Modra <amodra@gmail.com>
1352 * Makefile.in: Regenerate.
1353 * config.in: Regenerate.
1354 * doc/Makefile.in: Regenerate.
1356 2014-03-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
1357 Vishnu KS <Vishnu.k_s@atmel.com>
1358 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
1359 Soundararajan <Soundararajan.dhakshinamoorthy@atmel.com>
1361 * gas/tc-avr.c: Add new devices
1362 avr25: ata5272, attiny828
1363 avr35: ata5505, attiny1634
1364 avr4: atmega8a, ata6285, ata6286, atmega48pa
1365 avr5: at90pwm161, ata5790, ata5795, atmega164pa, atmega165pa,
1366 atmega168pa, atmega32a, atmega64rfr2, atmega644rfr2, atmega64a,
1368 avr51: atmega128a, atmega1284
1369 avrxmega2: atxmega16a4u, atxmega16c4, atxmega32a4u, atxmega32c4,
1370 atxmega32e5, atxmega16e5, atxmega8e5
1371 avrxmega4: atxmega64a3u, atxmega64a4u, atxmega64b1, atxmega64b3,
1372 atxmega64c3, atxmega64d4
1373 avrxmega6: atxmega128a3u, atxmega128b3, atxmega128c3,
1374 atxmega128d4, atxmega192a3u, atxmega192c3, atxmega256a3u,
1375 atxmega256c3, atxmega384c3, atxmega384d3
1376 avrxmega7: atxmega128a4u
1377 * doc/c-avr.texi: Ditto.
1379 2014-03-05 Alan Modra <amodra@gmail.com>
1381 Update copyright years.
1383 2014-03-05 Alan Modra <amodra@gmail.com>
1385 * config/tc-ppc.c (ppc_elf_suffix): Support @localentry.
1386 (md_apply_fix): Support R_PPC64_ADDR64_LOCAL.
1388 2014-03-05 Alan Modra <amodra@gmail.com>
1390 * config/tc-ppc.c (md_assemble): Move code adjusting reloc types
1391 later. Merge absolute and relative branch reloc selection.
1392 Generate 16-bit relocs for most 16-bit insn fields given a
1393 non-constant expression.
1395 2014-03-05 Alan Modra <amodra@gmail.com>
1397 * config/tc-ppc.c (ppc_is_toc_sym): Remove OBJ_ELF support.
1398 (md_assemble): Don't call ppc_is_toc_sym for ELF.
1400 2014-03-04 Heiher <r@hev.cc>
1402 * config/tc-mips.c (mips_cpu_info_table): Use ISA_MIPS64R2 for
1405 2014-03-03 Nick Clifton <nickc@redhat.com>
1407 * config/msp430/msp430.c: Replace known mcu array with known
1408 msp430 ISA mcu name array.
1409 Accept any name for -mmcu option.
1410 Add -mz option to warn about missing NOP following an interrupt
1412 (check_for_nop): New.
1413 (msp430_operands): Emit a warning, if requested, when an interrupt
1414 changing instruction is not followed by a NOP.
1415 * doc/c-msp430.c: Document -mz option.
1417 2014-03-03 Alan Modra <amodra@gmail.com>
1419 * config/bfin-lex-wrapper.c: Correct copyright date.
1420 * config/obj-fdpicelf.c: Likewise.
1421 * config/obj-fdpicelf.h: Likewise.
1422 * config/tc-frv.c: Correct copyright punctuation.
1423 * config/tc-ip2k.c: Likewise.
1424 * config/tc-iq2000.c: Likewise.
1425 * config/tc-mep.c: Likewise.
1426 * config/tc-tic4x.c: Likewise.
1427 * config/tc-tic4x.h: Likewise.
1429 2014-03-01 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
1431 * config/tc-avr.c: Remove atxmega16x1.
1433 2014-02-28 Alan Modra <amodra@gmail.com>
1435 * dwarf2dbg.c (out_debug_line): Correct .debug_line header_length
1436 field for 64-bit dwarf.
1438 2014-02-21 Ilya Tocar <ilya.tocar@intel.com>
1440 * config/tc-i386.c (cpu_arch): Add .prefetchwt1.
1441 * doc/c-i386.texi: Document .prefetchwt1/prefetchwt1.
1443 2014-02-12 Ilya Tocar <ilya.tocar@intel.com>
1445 * config/tc-i386.c (cpu_arch): Add .clflushopt, .xsavec, .xsaves.
1446 * doc/c-i386.texi: Document .xsavec/xsavec/.xsaves/xsaves/
1447 clflushopt/.clfushopt.
1449 2014-02-10 Alan Modra <amodra@gmail.com>
1451 * po/POTFILES.in: Regenerate.
1452 * po/gas.pot: Regenerate.
1454 2014-02-03 Sandra Loosemore <sandra@codesourcery.com>
1456 * config/tc-nios2.c (md_apply_fix): Test for new relocs.
1457 (nios2_special_reloc): Add %call_lo, %call_hiadj, %got_lo,
1458 %got_hiadj relocation operators. Sort table and add comment
1459 to explain ordering.
1460 (nios2_fix_adjustable): Test for new relocs.
1461 * doc/c-nios2.texi (Nios II Relocations): Document new relocation
1464 2014-01-30 Sandra Loosemore <sandra@codesourcery.com>
1466 * config/tc-nios2.c (md_apply_fix): Handle BFD_RELOC_NIOS2_CALL26_NOAT.
1467 (nios2_assemble_args_m): Likewise.
1468 (md_assemble): Likewise.
1470 2014-01-24 DJ Delorie <dj@redhat.com>
1472 * config/tc-msp430.c (msp430_section): Always flag data sections,
1474 (msp430_frob_section): New. Make sure all sections are noticed if
1476 (msp430_lcomm): New. Flag bss if .lcomm is seen.
1477 (msp430_comm): New. Likewise.
1478 (md_pseudo_table): Add them.
1479 * config/tc-msp430.h (msp430_frob_section): Declare.
1480 (tc_frob_section): Define.
1482 2014-01-23 Nick Clifton <nickc@redhat.com>
1484 * config/tc-msp430.c (show_mcu_list): Delete.
1485 (md_parse_option): Accept any MCU name. Accept several more
1486 variants for the -mcpu option.
1487 (md_show_usage): Do not call show_mcu_list.
1489 2014-01-22 DJ Delorie <dj@redhat.com>
1491 * config/tc-msp430.c (msp430_refsym): New: ".refsym <symbol>"
1492 * doc/c-msp430.texi (MSP430 Directives): Document it.
1494 2014-01-22 Michael Zolotukhin <michael.v.zolotukhin@gmail.com>
1496 * config/tc-i386.c (check_VecOperands): Remove regzmm from AVX2
1499 2014-01-22 Michael Zolotukhin <michael.v.zolotukhin@gmail.com>
1502 * config/tc-i386.c (check_VecOperands): Add check for invalid
1503 register set in AVX512 gathers.
1505 2014-01-22 Alan Modra <amodra@gmail.com>
1507 * config/tc-tic4x.c (md_shortopts): s/CONST/const/.
1509 2014-01-21 DJ Delorie <dj@redhat.com>
1511 * config/tc-rl78.c (require_end_of_expr): New.
1512 (md_operand): Call it.
1513 (rl78_cons_fix_new): Mark LO16, HI16, ahd HI8 internal relocations
1516 2014-01-17 Will Newton <will.newton@linaro.org>
1518 * config/tc-arm.c (do_vfp_nsyn_cvt_fpv8): Set OP to 1
1519 for the s32.f64 flavours of VCVT.
1521 2014-01-14 Nick Clifton <nickc@redhat.com>
1524 * config/tc-z80.c (wrong_match): Provide format string to
1526 (parse_exp_not_indexed): Delete unused variable dummy.
1527 (emit_byte): Delete unused variable fixp.
1529 2014-01-08 H.J. Lu <hongjiu.lu@intel.com>
1531 * config/tc-i386.c (regbnd): Removed.
1532 (vec_disp8): Likewise.
1534 2014-01-08 H.J. Lu <hongjiu.lu@intel.com>
1536 * as.c (parse_args): Update copyright year to 2014.
1538 2014-01-07 Tom Tromey <tromey@redhat.com>
1540 * config/tc-tic30.c (debug): Avoid old VA_* compatibility
1543 2014-01-07 Tom Tromey <tromey@redhat.com>
1545 * config/tc-microblaze.h (parse_cons_expression_microblaze): Don't
1548 2014-01-07 Tom Tromey <tromey@redhat.com>
1550 * config/tc-xc16x.h: Don't use ANSI_PROTOTYPES.
1552 2013-01-07 Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
1554 * config/tc-aarch64.c (aarch64_cpus): Add entry for "xgene-1"
1556 For older changes see ChangeLog-2013
1558 Copyright (C) 2014 Free Software Foundation, Inc.
1560 Copying and distribution of this file, with or without modification,
1561 are permitted in any medium without royalty provided the copyright
1562 notice and this notice are preserved.
1568 version-control: never