1 2008-11-21 Sterling Augustine <sterling@tensilica.com>
3 * config/tc-xtensa.c (check_t1_t2_reads_and_writes): Call
4 xtensa_state_is_shared_or to allow multiple opcodes within a
5 single FLIX bundle to write to these special states.
7 2008-11-19 Hans-Peter Nilsson <hp@axis.com>
9 * config/tc-cris.c (cris_number_to_imm): Apply S_SET_THREAD_LOCAL
10 on symbols in TLS relocs.
12 2008-11-19 Nick Clifton <nickc@redhat.com>
14 * doc/fdl.texi: Update to v1.3
15 * doc/as.texinfo: Change license to v1.3.
17 2008-11-18 Catherine Moore <clm@cm00re.com>
19 * config/tc-arm.c (neon_type_mask): Renumber.
20 (type_chk_of_el_type): Handle F_F16.
21 (neon_cvt_flavour): Recognize half-precision conversions.
22 (do_neon_cvt): New shapes NS_QD and
23 NS_DQ. Encode half-precision conversions.
24 (do_neon_cvtt): Encode the T bit.
25 (asm_opcode_insns): vcvt, vcvtt support.
26 (arm_option_cpu_value): Add neon-fp16 support.
28 2008-11-17 Nick Clifton <nickc@redhat.com>
30 * as.c (parse_args): Update copyright year.
32 2008-11-14 Mat Hostetter <mat@lcs.mit.edu>
34 * read.c (emit_expr): Grow frag before filling it so that
35 dot_value remains valid.
37 2008-11-14 Peter Jansen <pwjansen@yahoo.com>
40 * config/tc-arm.c: Ensure that all uses of as_bad have a
43 2008-11-12 Hans-Peter Nilsson <hp@axis.com>
45 * config/tc-cris.c (cris_number_to_imm): Except for
46 BFD_RELOC_NONE, always set contents. Where previously this was
47 skipped, set contents to 0.
50 * input-scrub.c (input_scrub_include_sb): Make the position
51 after the input have defined contents, a 0 character.
53 * config/tc-cris.c (cris_relax_frag): Add missing case for
54 ENCODE_RELAX (STATE_COND_BRANCH_PIC, STATE_DWORD).
57 * read.c (read_a_source_file): Rearrange evaluation order when
58 looking for '=' to avoid conditional on undefined contents of
59 input_line_pointer[1].
61 2008-11-06 Adam Nemet <anemet@caviumnetworks.com>
63 * config/tc-mips.c (COP_INSN): Change logic to always return false
66 2008-11-06 Chao-ying Fu <fu@mips.com>
68 * config/tc-mips.c (validate_mips_insn): Add case '1'.
69 (mips_ip): Add case '1' to process sync type.
71 2008-11-06 Joel Sherrill <joel.sherrill@oarcorp.com>
73 * configure.tgt: Add m32c-*-rtems* and m32r-*-rtems*.
75 2008-11-04 Sterling Augustine <sterling@tensilica.com>
77 * config/tc-xtensa.c (tinsn_check_arguments): Check for multiple
78 writes to the same register.
80 2008-11-04 Sterling Augustine <sterling@tensilica.com>
82 * config/tc-xtensa.c (xtensa_j_opcode): New.
83 (xg_instruction_matches_option_term): Handle "FREEREG" option.
84 (xg_build_to_insn): Likewise. Update renamed tls_reloc reference.
85 (md_begin): Initialize xtensa_j_opcode.
86 (md_assemble): Update renamed tls_reloc reference. Handle "j.l".
87 (xg_assemble_vliw_tokens): Save free_reg info in the frag.
88 (tinsn_immed_from_frag): Get free_reg info back out of the frag.
89 (vinsn_to_insnbuf): Update renamed tls_reloc references.
90 Distinguish extra argument for "FREEREG" from extra TLS argument.
91 * config/tc-xtensa.h (struct xtensa_frag_type): Add free_reg field.
92 * config/xtensa-istack.h (struct tinsn_struct): Rename tls_reloc
94 * config/xtensa-relax.c (widen_spec_list): Add rules to relax "j.l".
95 (build_transition): Handle "FREEREG" operand.
96 * config/xtensa-relax.h (enum op_type): Add OP_FREEREG.
98 2008-10-31 Alan Modra <amodra@bigpond.net.au>
102 2008-10-24 Maciej W. Rozycki <macro@linux-mips.org>
104 * config/tc-mips.c (mips_cpu_info_table): Move the MIPS64r2
105 comment so that Broadcom SB-1 cores are in the MIPS64 section.
107 2008-10-21 Alan Modra <amodra@bigpond.net.au>
109 * config/tc-bfin.c (gencode, allocate): Remove unnecessary cast.
110 * config/tc-ns32k.c (bit_fix_new): Likewise.
111 * config/tc-m68k.c (md_begin): Likewise.
112 * hash.c (hash_insert, hash_jam): Likewise.
113 * symbols.c (symbol_create, local_symbol_make): Likewise.
114 * frags.c (frag_alloc): Likewise.
116 2008-10-20 Jay Krell <jay.krell@cornell.edu>
118 * config/bfin-parse.y: Use C style comments.
119 * config/tc-bfin.c: Likewise.
120 * config/tc-m68k.c: Likewise.
121 * config/tc-mips.c: Likewise.
123 2008-10-12 H.J. Lu <hongjiu.lu@intel.com>
125 * config/tc-i386.c (processor_type): Moved to tc-i386.h.
126 (cpu_arch_tune): Make it global.
127 (cpu_arch_isa): Likewise.
128 (cpu_arch_isa_flags): Likewise.
129 (i386_align_code): Check fragP->tc_frag_data.isa,
130 fragP->tc_frag_data.isa_flags and cpu_arch_tune instead of
131 cpu_arch_isa, cpu_arch_isa_flags and cpu_arch_tune,
134 * config/tc-i386.h (processor_type): Moved from tc-i386.c.
135 (cpu_arch_tune): New.
136 (cpu_arch_isa): Likewise.
137 (cpu_arch_isa_flags): Likewise.
138 (i386_tc_frag_data): Likewise.
139 (TC_FRAG_TYPE): Likewise.
140 (TC_FRAG_INIT): Likewise.
142 2008-10-09 Bob Wilson <bob.wilson@acm.org>
144 * doc/as.texinfo (Pseudo Ops): Swap order of Comm and CFI menu entries.
145 (Altmacro, Comm, Loc, Loc_mark_labels, List, MRI, PopSection, Sleb128):
146 Moved into alphabetical order.
148 2008-10-09 Bob Wilson <bob.wilson@acm.org>
150 * doc/as.texinfo (Dot): Expand no-space-dir conditional to include
152 (Pseudo Ops): Put conditionals around Skip and Space menu entries.
153 (Line): Remove conditional declaration of Ln node and section here.
154 Put aout-bout description inside the no-line-dir conditional.
155 (Skip, Space): Use a separate conditional for each node.
157 2008-10-09 Bob Wilson <bob.wilson@acm.org>
159 * doc/as.texinfo (Pseudo Ops): Remove no-file-dir conditional around
160 menu entry for File; remove version-specific .file operands from menu
161 description. Replace "LNS directives" menu entry with new entries
162 for "Loc" and "Loc_mark_labels".
163 (LNS directives): Split into separate nodes for each directive.
164 (Loc): New node for .loc directive. Mention that this directive
165 is for DWARF2 and add a missing article.
166 (Loc_mark_labels): Likewise for .loc_mark_labels.
167 (File): Change this node to describe both the default version and
168 the DWARF2 version of .file. Move the no-file-dir conditional to
169 include only the default version.
171 2008-10-09 Eric Botcazou <ebotcazou@adacore.com>
173 * dw2gencfi.c (cfi_finish): Deal with md_fix_up_eh_frame.
174 * config/tc-i386.h (md_fix_up_eh_frame): Define on Solaris.
175 (i386_solaris_fix_up_eh_frame): Declare.
176 * config/tc-i386.c (i386_solaris_fix_up_eh_frame): New function.
178 2008-10-09 Nick Clifton <nickc@redhat.com>
181 * doc/as.texinfo (Dollar Local Labels): Correct description of
182 dollar local labels to show that the colon suffix is still
185 2008-10-08 Nick Clifton <nickc@redhat.com>
187 * configure.in (ALL_LINGUAS): Add "id".
188 * configure: Regenerate.
189 * po/id.po: New Indonesian translation.
191 2008-10-07 H.J. Lu <hongjiu.lu@intel.com>
193 * read.c (pseudo_set): Don't allow global register symbol only
194 if TC_GLOBAL_REGISTER_SYMBOL_OK is undefined.
195 * symbols.c (S_SET_EXTERNAL): Likewise.
197 * config/tc-mmix.h (TC_GLOBAL_REGISTER_SYMBOL_OK): Defined.
199 * doc/internals.texi: Document TC_GLOBAL_REGISTER_SYMBOL_OK.
201 2008-10-06 Bob Wilson <bob.wilson@acm.org>
203 * doc/as.texinfo (Local): New description of ELF .local directive.
205 2008-10-06 Nick Clifton <nickc@redhat.com>
208 * read.c (get_line_sb): Renamed to get_non_macro_line_sb.
209 (_find_end_of_line): Add extra parameter indicating if the line is
210 inside a macro. If it is then do not allow the @ character to be
211 treated as a line separator character.
212 (read_a_source): Update use of _find_end_of_line.
213 (find_end_of_line): Likewise.
214 (s_irp): Update use of get_line_sb.
216 (do_repeat): Likewise.
217 (get_line_sb): New function. Like the old version of get_line_sb
218 except that it takes an extra parameter indicating whether the
219 line is inside a macro.
220 (get_macro_line_sb): New function.
222 2008-10-04 Hans-Peter Nilsson <hp@axis.com>
224 * config/tc-cris.c: Update all comments regarding explicit relocations
225 to, besides PIC, also imply TLS or to say "relocation specifier" or
227 (RELOC_SUFFIX_CHAR): Rename from PIC_SUFFIX_CHAR. Change all callers.
228 (cris_get_reloc_suffix): Rename from cris_get_pic_suffix. Change all
229 callers. Also handle TLS relocs.
230 (cris_get_specified_reloc_size): Rename from cris_get_pic_reloc_size.
231 Change all callers. Also handle TLS relocs.
233 (cris_process_instruction): Check for non-PIC TLS relocations and
234 adjust message when emitting error message about relocation not
236 (get_autoinc_prefix_or_indir_op): Also check for relocation suffix
238 (get_3op_or_dip_prefix_op): Ditto.
239 (cris_number_to_imm, tc_gen_reloc): Handle TLS relocs like PIC relocs.
241 2008-10-03 Kazu Hirata <kazu@codesourcery.com>
243 * listing.c (buffer_line): Open the source file with FOPEN_RB.
244 Manually process line ends.
246 2008-09-30 Wesley W. Terpstra <wesley@terpstra.ca>
247 Nick Clifton <nickc@redhat.com>
249 * config/tc-tic4x.c (tic4x_globl): Call S_SET_EXTERNAL as well as
252 2008-09-30 Wesley W. Terpstra <wesley@terpstra.ca>
253 Nick Clifton <nickc@redhat.com>
255 * coffgen.c (coff_write_symbols): Check to see if a symbol's flags
256 do not match it class and if necessary update the class.
257 (null_error_handler): New function. Suppresses the generation of
259 * coff64-rs6000.c (bfd_xcoff_backend_data): Update comment.
261 2008-09-30 Alan Modra <amodra@bigpond.net.au>
263 * Makefile.am: Run "make dep-am".
264 * Makefile.in: Regenerate.
266 2008-09-29 Nick Clifton <nickc@redhat.com>
268 * dw2gencfi.c (output_cfi_insn): Fix typo in invocation of
269 tc_cfi_emit_pcrel_expr macro.
271 2008-09-29 Peter O'Gorman <pogma@thewrittenword.com>
272 Steve Ellcey <sje@cup.hp.com>
274 * configure: Regenerate for new libtool.
276 * Makefile.in: Ditto.
277 * doc/Makefile.in: Ditto.
279 2008-09-29 Nick Clifton <nickc@redhat.com>
282 * app.c (do_scrub_chars): Only issue warnings about tick
283 characters detected in symbol strings if hex ticks are supported.
285 2008-09-29 Nick Clifton <nickc@redhat.com>
287 * dw2gencfi.c (output_cfi_insn): Fix typo in invocation of
288 tc_cfi_emit_pcrel_expr macro.
290 2008-09-28 Daniel Jacobowitz <dan@codesourcery.com>
292 * NEWS: Mention .cfi_val_encoded_addr.
294 2008-09-26 Eric Botcazou <ebotcazou@adacore.com>
296 * Makefile.am (TARG_ENV_HFILES): Add config/te-solaris.h.
297 * Makefile.in (TARG_ENV_HFILES): Likewise.
298 * configure.tgt (Solaris targets): Set em=solaris.
299 * config/te-solaris.h: New file.
301 2008-09-26 Jie Zhang <jie.zhang@analog.com>
303 * config/bfin-parse.y (asm_1): Fix reduce/reduce conflicts.
305 2008-09-24 Richard Henderson <rth@redhat.com>
307 * dw2gencfi.c (DWARF2_ADDR_SIZE): Provide default.
308 (struct cfi_insn_data): Add ea member.
309 (CFI_val_encoded_addr, dot_cfi_val_encoded_addr): New.
310 (output_cfi_insn): Handle CFI_val_encoded_addr.
311 (select_cie_for_fde): Don't match CFI_val_encoded_addr.
312 * doc/as.texinfo (.cfi_val_encoded_addr): Document.
314 2008-09-25 Alan Modra <amodra@bigpond.net.au>
317 * listing.c (print_options): Don't call fprintf without format string.
319 2008-09-19 Alan Modra <amodra@bigpond.net.au>
321 * write.c (TC_FORCE_RELOCATION_SUB_LOCAL): Heed md_register_arithmetic.
322 (TC_VALIDATE_FIX_SUB): Likewise.
323 * config/tc-frv.h (TC_FORCE_RELOCATION_SUB_LOCAL): Likewise.
324 * config/tc-hppa.h (TC_FORCE_RELOCATION_SUB_LOCAL): Likewise.
325 * config/tc-mn10300.h (TC_VALIDATE_FIX_SUB): Likewise.
326 * config/tc-sh.h (TC_VALIDATE_FIX_SUB): Likewise.
327 (TC_FORCE_RELOCATION_SUB_LOCAL): Likewise.
328 * config/tc-sh64.h (TC_VALIDATE_FIX_SUB): Likewise.
329 * config/tc-xtensa.h (TC_VALIDATE_FIX_SUB): Likewise.
330 * doc/internals.texi (TC_FORCE_RELOCATION_SUB_ABS,
331 TC_FORCE_RELOCATION_SUB_LOCAL, TC_VALIDATE_FIX_SUB): Show new param.
333 * write.c (md_register_arithmetic): Define.
334 (fixup_segment): Adjust TC_FORCE_RELOCATION_SUB_ABS invocation.
335 Modify error message when registers involved.
336 (TC_FORCE_RELOCATION_SUB_ABS): Heed md_register_arithmetic.
337 * config/tc-sh.h (TC_FORCE_RELOCATION_SUB_ABS): Likewise.
339 2008-09-15 Alan Modra <amodra@bigpond.net.au>
341 * write.c (install_reloc): Correct EMIT_SECTION_SYMBOLS test.
343 2008-09-15 Alan Modra <amodra@bigpond.net.au>
345 * config/tc-frv.c (md_apply_fix): Use abs_section_sym for
346 relocs with no symbol.
347 * config/tc-mmix.c (md_assemble): Mark fake symbol on
348 BFD_RELOC_MMIX_BASE_PLUS_OFFSET as OK for use by relocs.
349 (mmix_md_end): Likewise mark mmix reg contents section symbol.
351 2008-09-14 Chris Smith <chris@zxdesign.info>
353 * config/tc-z80.c: Opcode generation of ld a,(bc) and ld a,(de) was
354 broken, as the opcode of ld a,(de) was being emitted for both.
356 2008-09-12 Sterling Augustine <sterling@tensilica.com>
358 * config/tc-xtensa.c (init_op_placement_info_table): Allow number of
359 operands equal to MAX_INSN_ARGS.
361 2008-09-11 Jan Kratochvil <jan.kratochvil@redhat.com>
363 * configure.in: Call AC_SYS_LARGEFILE.
364 * config.in: Regenerate.
365 * configure: Regenerate.
367 2008-09-09 Peter Bergner <bergner@vnet.ibm.com>
369 * config/tc-ppc.c (ppc_setup_opcodes): Simplify POWER4/NOPOWER4 test.
370 Remove POWER5 and POWER6 tests.
372 2008-09-08 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
374 * config/tc-hppa.c (hppa_regname_to_dw2regnum): Add register name to
375 number support for 32-bit targets.
377 2008-09-08 Tristan Gingold <gingold@adacore.com>
379 * NEWS: Add a marker for the 2.19 features.
381 2008-09-07 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
383 * config/tc-hppa.h (DIFF_EXPR_OK): Define for SOM target. Revise
384 comment regarding use of difference expressions.
385 (TC_FORCE_RELOCATION_SUB_LOCAL): Define to 1.
387 * dw2gencfi.c (CFI_DIFF_EXPR_OK): Define if not defined.
388 (dot_cfi_personality): Use CFI_DIFF_EXPR_OK instead of DIFF_EXPR_OK.
389 (dot_cfi_lsda, output_cie, output_fde): Likewise.
390 * config/tc-hppa.h (CFI_DIFF_EXPR_OK): Define.
392 2008-09-06 Richard Sandiford <rdsandiford@googlemail.com>
394 * config/tc-mips.h (DWARF2_FDE_RELOC_SIZE): Define.
396 2008-09-03 Nick Clifton <nickc@redhat.com>
398 * config/tc-i386.c (pe_lcomm_internal): New function. Allows the
399 alignment field of the .lcomm directive to be optional.
400 (pe_lcomm): New function. Pass pe_lcomm_internal to
402 (md_pseudo_table): Implement .lcomm directive for COFF based
404 * doc/c-i386.texi (i386-Directives): New node. Used to document
405 the .lcomm directive.
407 2008-08-30 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
409 * config/tc-hppa.h: Don't define DWARF2_EH_FRAME_READ_ONLY on Linux
412 2008-08-29 Eric B. Weddington <eric.weddington@atmel.com>
414 * config/tc-avr.c (mcu_types): Add atmega16u4.
415 * doc/c-avr.texi: Likewise.
417 2008-08-28 H.J. Lu <hongjiu.lu@intel.com>
419 * config/tc-ia64.c (CR_IIB0): New.
421 (cr): Add cr.iib0 and cr.iib1.
422 (specify_resource): Handle IA64_RS_CR_IIB and CR_IIB0/CR_IIB1.
424 2008-08-28 Jan Beulich <jbeulich@novell.com>
426 * config/tc-i386.c (md_assemble): Force number of displacement
427 operands to zero when processing string instruction.
428 (i386_index_check): Special-case string instruction operands. Don't
429 fudge address prefix if there already was a memory operand. Fix
430 error message to correctly reflect the addressing mode used.
431 (i386_att_operand): Fix comment.
432 (i386_intel_operand): Snapshot, clear, and restore base and index
433 reg for each operand processed. Increment count of memory operands
436 2008-08-27 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
438 * config/tc-hppa.c (is_SB_relative): New macro.
439 (fix_new_hppa): Remove $segrel$ marker.
440 (cons_fix_new_hppa): Set reloc type R_PARISC_SEGREL32 if expression is
442 * config/tc-hppa.h (tc_frob_symbol): Check for $segrel$.
444 2008-08-27 Jan Beulich <jbeulich@novell.com>
446 * config/tc-i386.c (check_string): Use register_prefix for error
448 (process_operands): Likewise.
450 2008-08-26 Mark Mitchell <mark@codesourcery.com>
452 * c-arm.texi: Add tutorial on ARM unwinding pseudo ops.
454 2008-08-26 Jie Zhang <jie.zhang@analog.com>
456 * config/bfin-parse.y (check_macfunc_option): Fix instruction
458 (asm_1): Check mode for 16-bit multiply instructions.
460 2008-08-24 Alan Modra <amodra@bigpond.net.au>
462 * configure.in: Update a number of obsolete autoconf macros.
463 * configure: Regenerate.
464 * aclocal.m4: Regenerate.
466 2008-08-22 Nick Clifton <nickc@redhat.com>
468 * config/tc-mcore.c (md_assemble): Increase length of name array
469 to include terminating NUL.
471 2008-08-22 Jie Zhang <jie.zhang@analog.com>
473 * config/bfin-lex.l (NUMBER): Protect special `.'.
475 2008-08-22 Alan Modra <amodra@bigpond.net.au>
477 * symbols.c (symbol_clone): Ensure clones are not external.
479 2008-08-22 Alan Modra <amodra@bigpond.net.au>
481 * config/tc-hppa.c (md_begin): Set BSF_KEEP for "dummy_symbol".
483 2008-08-21 Richard Henderson <rth@redhat.com>
485 * dw2gencfi.c (DWARF2_FDE_RELOC_SIZE): New.
486 (output_cie, output_fde): Use it.
487 (DWARF2_EH_FRAME_READ_ONLY): New.
488 (cfi_finish): Use it.
490 * config/tc-hppa.h (DWARF2_FDE_RELOC_SIZE): Set to 8 for 64-bit.
491 (DWARF2_CIE_DATA_ALIGNMENT): Change sign.
492 (DWARF2_EH_FRAME_READ_ONLY): New.
493 * config/tc-hppa.c (tc_gen_reloc): Generate pc-relative relocations
494 from the results of DIFF_EXPR_OK manipulation.
496 2008-08-21 Sterling Augustine <sterling@tensilica.com>
498 * config/xtensa-istack.h (MAX_INSN_ARGS): Increase to 64.
500 2008-08-20 Bob Wilson <bob.wilson@acm.org>
502 * config/tc-xtensa.c (O_tlsfunc, O_tlsarg, O_tlscall): Define.
503 (O_tpoff, O_dtpoff): Define.
504 (suffix_relocs): Add entries for TLS suffixes.
505 (xtensa_elf_cons): Check for invalid use of TLS relocations.
506 (map_operator_to_reloc): Add is_literal parameter and use it to
507 control translating TLS instruction relocations to the corresponding
509 (xg_valid_literal_expression): Allow TLS operators.
510 (xg_build_to_insn): Copy TLS operators from pseudo-instruction
511 operands to generated literals.
512 (xg_assemble_literal): Handle TLS operators. Update call to
513 map_operator_to_reloc.
514 (md_assemble): Handle CALLXn.TLS pseudo-instruction.
515 (md_apply_fix): Handle TLS relocations.
516 (emit_single_op): Handle TLS operators.
517 (convert_frag_immed): Update call to map_operator_to_reloc.
518 (vinsn_to_insnbuf): Emit relocations for TLS-related instructions.
519 * config/xtensa-istack.h (tinsn_struct): Add tls_reloc field.
520 * config/xtensa-relax.c (append_literal_op): Add src_op parameter
521 to initialize the op_data field of the BuildOp.
522 (build_transition): Use it here to record the source operand
523 corresponding to a generated literal.
524 * config/xtensa-relax.h (build_op): Comment op_data use for literals.
526 2008-08-20 H.J. Lu <hongjiu.lu@intel.com>
528 AVX Programming Reference (August, 2008)
529 * config/tc-i386.c (CPU_FLAGS_AES_MATCH): New.
530 (CPU_FLAGS_AVX_MATCH): Likewise.
531 (CPU_FLAGS_32BIT_MATCH): Updated.
532 (cpu_flags_match): Likewise.
534 2008-08-20 Alan Modra <amodra@bigpond.net.au>
537 * write.c (install_reloc): Check that reloc symbols have been
539 (set_symtab): Mark symbols with BSF_KEEP.
541 2008-08-18 H.J. Lu <hongjiu.lu@intel.com>
543 * config/tc-i386.c (i386_align_code): Fix a comment typo.
545 2008-08-15 Alan Modra <amodra@bigpond.net.au>
548 * configure.in: Invoke AC_USE_SYSTEM_EXTENSIONS.
549 * Makefile.in: Regenerate.
550 * aclocal.m4: Regenerate.
551 * config.in: Regenerate.
552 * configure: Regenerate.
553 * doc/Makefile.in: Regenerate.
555 2008-08-14 Alan Modra <amodra@bigpond.net.au>
557 * config/tc-tic4x.c (tic4x_operands_parse): Make static.
559 2008-08-13 Ben Elliston <bje@au.ibm.com>
561 * doc/as.texinfo (Align): Document the PowerPC behaviour.
563 2008-08-13 Alan Modra <amodra@bigpond.net.au>
565 * as.c, as.h, ecoff.c, hash.c, macro.c, symbols.c, config/obj-evax.c,
566 config/obj-som.c, config/tc-alpha.c, config/tc-arm.c, config/tc-bfin.c,
567 config/tc-bfin.h, config/tc-crx.c, config/tc-frv.c, config/tc-frv.h,
568 config/tc-hppa.h, config/tc-i386.c, config/tc-i860.c, config/tc-i960.h,
569 config/tc-ia64.c, config/tc-ia64.h, config/tc-m32c.c, config/tc-m32c.h,
570 config/tc-m68k.c, config/tc-maxq.c, config/tc-s390.c, config/tc-s390.h,
571 config/tc-sparc.c, config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
572 config/tc-tic4x.c, config/tc-tic4x.h, config/tc-tic54x.c,
573 config/tc-tic54x.h, config/tc-vax.c, doc/internals.texi: Banish PARAMS
574 and PTR. Convert to ISO C. Delete unnecessary forward declarations.
576 2008-08-12 Alan Modra <amodra@bigpond.net.au>
578 * config/tc-arm.c (s_unreq): Adjust hash_delete call.
579 * config/tc-ia64.c (dot_rot): Likewise.
581 2008-08-11 Alan Modra <amodra@bigpond.net.au>
584 * hash.c: Expand PTR to void *.
585 (hash_delete): Add "freeme" parameter. Call obstack_free.
586 * hash.h: Expand PTR to void *.
587 (hash_delete): Update prototype.
588 * macro.c (macro_expand_body): hash_delete LOCALs from formal_hash.
589 * config/tc-tic54x.c (tic54x_remove_local_label): Update hash_delete
591 (subsym_substitute): Likewise.
592 * doc/internals.texi (hash_delete): Update.
594 2008-08-08 Anatoly Sokolov <aesok@post.ru>
596 * config/tc-avr.c (mcu_types): Add avr25, avr31, avr35, and avr51
597 architectures. Reorganize list to put mcu types in correct
598 architectures and to order list same as in GCC. Use new ISA
599 definitions in include/opcode/avr.h.
600 * doc/c-avr.texi: Add avr25, avr31, avr35, and avr51 architecture
601 descriptions. Reorganize descriptions to put mcu types in correct
602 architectures and to order lists same as in GCC.
604 2008-08-08 Richard Sandiford <rdsandiford@googlemail.com>
605 Daniel Jacobowitz <dan@codesourcery.com>
607 * config/tc-mips.c (OPTION_CALL_NONPIC): New macro.
608 (OPTION_NON_SHARED, OPTION_XGOT, OPTION_MABI, OPTION_32)
609 (OPTION_N32, OPTION_64, OPTION_MDEBUG, OPTION_NO_MDEBUG)
610 (OPTION_PDR, OPTION_NO_PDR, OPTION_MVXWORKS_PIC): Bump by 1.
611 (md_longopts): Add -call_nonpic.
612 (md_parse_option): Handle OPTION_CALL_NONPIC.
613 (md_show_usage): Add -call_nonpic.
615 2008-08-08 Sterling Augustine <sterling@tensilica.com>
617 * config/tc-xtensa.c (exclude_section_from_property_tables): New.
618 (xtensa_create_property_segments): Use it.
619 (xtensa_create_xproperty_segments): Likewise.
621 2008-08-08 Alan Modra <amodra@bigpond.net.au>
623 * doc/internals.texi (DWARF2_FORMAT): Update for 2008-08-04 change.
625 2008-08-06 Richard Sandiford <rdsandiford@googlemail.com>
627 * config/tc-mips.c (mips16_reloc_p, got16_reloc_p, hi16_reloc_p)
628 (lo16_reloc_p): New functions.
629 (reloc_needs_lo_p): Use hi16_reloc_p and got16_reloc_p to
630 generalize relocation checks.
631 (matching_lo_reloc): New function.
632 (fixup_has_matching_lo_p): Use it.
633 (mips16_mark_labels): Don't clobber a symbol's visibility.
634 (append_insn): Use hi16_reloc_p and lo16_reloc_p.
635 (mips16_ip): Handle BFD_RELOC_MIPS16_GOT16 and BFD_RELOC_MIPS16_CALL16.
636 (md_apply_fix): Likewise.
637 (mips16_percent_op): Add %got and %call16.
638 (mips_frob_file): Use got16_reloc_p to generalize relocation checks.
639 Use matching_lo_reloc.
640 (mips_force_relocation): Use hi16_reloc_p and lo16_reloc_p to
641 generalize relocation checks.
642 (mips_fix_adjustable): Use lo16_reloc_p to generalize relocation
645 2008-08-06 DJ Delorie <dj@redhat.com>
647 * NEWS: Mention these changes.
649 * config/tc-h8300.h (H_TICK_HEX): Define.
650 * config/tc-h8300.c (OPTION_H_TICK_HEX): New.
651 (md_longopts): Add "-h-tick-hex".
652 (md_parse_option): Support it.
653 * doc/c-h8300.texi (H8/300 Options): Document it.
654 * doc/as.texinfo (Overview): Likewise.
656 * config/tc-sh.h (H_TICK_HEX): Define.
657 * config/tc-sh.c (OPTION_H_TICK_HEX): New.
658 (md_longopts): Add "-h-tick-hex".
659 (md_parse_option): Support it.
660 * doc/c-sh.texi (SH Options): Document it.
661 * doc/c-sh64.texi (SH64 Options): Document it.
662 * doc/as.texinfo (Overview): Likewise.
664 2008-08-05 Alan Modra <amodra@bigpond.net.au>
667 * dwarf2dbg.c (dwarf2_directive_file): Disable gas generated
668 debug info if we see compiler generated debug info.
669 (dwarf2_directive_loc): Likewise. Remove redundant debug_type test.
671 2008-08-04 Alan Modra <amodra@bigpond.net.au>
673 * dwarf2dbg.c: Remove superfluous forward function declarations.
674 (DWARF2_FORMAT): Add section arg.
675 (out_header): New function, split out from..
676 (out_debug_line): ..here.
677 (out_debug_aranges): Use out_header.
678 (out_debug_abbrev): Add info_seg and line_seg args. Use
679 DW_FORM_data8 (for DW_AT_stmt_list) if line_seg is 64-bit.
680 (out_debug_info): Use out_header. Output 8 byte DW_AT_stmt_list
681 if line_seg is 64-bit.
682 (dwarf2_finish): Adjust out_debug_abbrev call.
683 * config/tc-mips.h (DWARF2_FORMAT, mips_dwarf2_format): Add sec arg.
684 * config/tc-mips.c (mips_dwarf2_format): Likewise.
686 2008-08-04 Alan Modra <amodra@bigpond.net.au>
688 * Makefile.am (POTFILES.in): Set LC_ALL=C.
689 * Makefile.in: Regenerate.
690 * po/POTFILES.in: Regenerate.
692 2008-08-01 Peter Bergner <bergner@vnet.ibm.com>
694 * config/tc-ppc.c (parse_cpu): Rename altivec_or_spe to retain_flags.
695 Handle -mvsx and -mpower7.
696 (md_show_usage): Document -mpower7 and -mvsx.
697 * doc/as.texinfo (Target PowerPC): Document -mvsx.
698 * doc/c-ppc.texi (PowerPC-Opts): Document -mvsx and -mpower7.
700 2008-07-31 Peter Bergner <bergner@vnet.ibm.com>
702 * config/tc-ppc.c (parse_cpu) <power6>: Accept Altivec instructions.
705 2008-07-30 Michael J. Eager <eager@eagercon.com>
707 * config/tc-ppc.c (parse_cpu): Separate handling of -m403/405.
708 (md_show_usage): Likewise.
710 2008-07-30 Alan Modra <amodra@bigpond.net.au>
712 * messages.c, symbols.c, write.c: Silence gcc warnings.
714 2008-07-28 Ineiev <ineiev@yahoo.co.uk>
716 * config/tc-i386.c (operand_type_check): Warning fix.
718 2008-07-26 Michael Eager <eager@eagercon.com>
720 * doc/as.texinfo: Add description of single-precision attribute.
722 2008-07-24 Jie Zhang <jie.zhang@analog.com>
724 * config/bfin-parse.y (asm_1): Error if plain symbol is used
725 as load/store offset.
727 2008-07-22 Chao-ying Fu <fu@mips.com>
729 * config/tc-mips.c (mips_ip): Reset s to argsStart.
731 2008-07-22 Jie Zhang <jie.zhang@analog.com>
733 * config/tc-bfin.c (bfin_gen_loop): Remove loop symbol.
735 2008-07-21 DJ Delorie <dj@redhat.com>
737 * config/tc-h8300.c (fix_operand_size): Use the default size
738 specified by the .lbranch/.sbranch pseudos.
740 2008-07-18 DJ Delorie <dj@redhat.com>
742 * config/tc-m32c.h (H_TICK_HEX): Define.
743 * config/tc-m32c.c (OPTION_H_TICK_HEX): Define.
744 (md_longopts): Add support for it.
745 (md_parse_option): Likewise.
746 * doc/as.texinfo (Overview): Add new m32c options.
747 * doc/c-m32c.texi (M32C-Modifiers): Likewise
749 * as.h: (enable_h_tick_hex): New.
750 * app.c (enable_h_tick_hex): New.
752 (do_scrub_begin): Mark 'H' and 'h' as special if enable_h_tick_hex.
753 (do_scrub_chars): If enable_h_tick_hex and 'h', check for H'00
754 style hex constants and convert the input stream to 0x00 style.
755 (do_scrub_chars): If a 'X style character constant is found after
756 a symbol character (like you're or X'00), warn the user.
758 2008-07-10 Richard Sandiford <rdsandiford@googlemail.com>
760 * config/tc-mips.c (mips16_mark_labels): Use ELF_ST_SET_MIPS16.
761 (mips_fix_adjustable): Likewise.
762 (mips_frob_file_after_relocs): Likewise.
764 2008-07-08 Nathan Sidwell <nathan@codesourcery.com>
766 * config/tc-m68k.c (m68k_set_cpu, m68k_set_arch): Don't complain
767 about overriding an earlier setting.
769 2008-07-07 Adam Nemet <anemet@caviumnetworks.com>
771 * config/tc-mips.c (NO_ISA_COP): New macro.
772 (COP_INSN): New macro.
773 (is_opcode_valid): Use them.
774 (macro) <ld_st>: Use them. Don't accept coprocessor load store
775 insns based on the ISA if CPU is NO_ISA_COP.
776 <copz>: Likewise for coprocessor operations.
778 2008-07-07 Paul Brook <paul@codesourcery.com>
780 * config/tc-arm.c (arm_fix_adjustable): Don't adjust MOVW/MOVT
783 2008-07-07 Ralf Corsépius <ralf.corsepius@rtems.org>
785 * configure.tgt: Add bfin-*-rtems*.
787 2008-07-04 Alan Modra <amodra@bigpond.net.au>
789 * config/tc-spu.c (md_apply_fix): Handle fully resolved
790 BFD_RELOC_32_PCREL, BFD_RELOC_SPU_HI16 and BFD_RELOC_SPU_LO16.
792 2008-06-25 Peter Bergner <bergner@vnet.ibm.com>
794 * config/tc-ppc.c (parse_cpu): Handle -m464.
795 (md_show_usage): Likewise.
797 2008-06-24 Eric B. Weddington <eric.weddington@atmel.com>
799 Add support for ATtiny13A.
800 * config/tc-avr.c (mcu_types): Add attiny13a.
801 * doc/c-avr.texi: Likewise.
803 2008-06-24 Bob Wilson <bob.wilson@acm.org>
804 Alan Modra <amodra@bigpond.net.au>
806 * write.c (relax_segment <rs_org>): Include current stretch
807 value when calculating whether .org is backwards.
809 2008-06-17 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
811 * configure: Regenerate.
813 2008-06-17 Nick Clifton <nickc@redhat.com>
815 * app.c (do_scrub_chars): Do not UNGET an EOF value.
817 2008-06-16 Hans-Peter Nilsson <hp@bitrange.com>
820 * config/tc-mmix.c (s_loc): Assume "negative" addresses belong to
821 text_section. Do the "stepping backwards" test for text_section
822 using unsigned operands.
824 2008-06-13 Peter Bergner <bergner@vnet.ibm.com>
826 * config/tc-ppc.c (ppc_cpu): Use ppc_cpu_t typedef.
827 (ppc_insert_operand): Likewise.
828 (ppc_machine): Likewise.
829 * config/tc-ppc.h: #include "opcode/ppc.h"
830 (struct _ppc_fix_extra <ppc_cpu>): Use ppc_cpu_t typedef.
831 (ppc_cpu): Update extern decl.
833 2008-06-12 Adam Nemet <anemet@caviumnetworks.com>
835 * config/tc-mips.c (validate_mips_insn): Handle field descriptors
836 +x, +X, +p, +P, +s, +S.
839 * config/tc-mips.c (validate_mips_insn): Handle field descriptor +Q.
841 (macro_build): Likewise.
842 (CPU_HAS_SEQ): New macro.
843 (macro2) <M_SEQ_I, M_SNE_I>: Use it. Emit seq/sne and seqi/snei.
845 2008-06-09 Eric B. Weddington <eric.weddington@atmel.com>
847 * config/tc-avr.c (mcu_types): Remove support for ATmega32HVB device.
848 * doc/c-avr.texi: Likewise.
850 2008-06-04 Nick Clifton <nickc@redhat.com>
852 * app.c (do_scrub_chars): Do not UNGET an EOF value.
854 2008-06-03 H.J. Lu <hongjiu.lu@intel.com>
856 * config/tc-i386.c (set_sse_check): New.
857 (md_pseudo_table): Add "sse_check".
859 2008-06-03 Paul Brook <paul@codesourcery.com>
861 * config/tc-arm.c (do_t_rbit): Populate both rm fields.
863 2008-05-30 Nick Clifton <nickc@redhat.com>
866 * config/tc-avr.c (avr_ldi_expression): Do not warn about unknown
869 2008-05-29 Maxim Kuvyrkov <maxim@codesourcery.com>
871 * config/tc-mips.c (mips_cpu_info_table): Move records for
872 ST Loongson-2E/2F processors to a better place.
874 2008-05-23 H.J. Lu <hongjiu.lu@intel.com>
877 * config/tc-i386.c (match_template): Report ambiguous operand
878 size, not invalid suffix when there is no match in Intel
881 2008-05-22 Paul Brook <paul@codesourcery.com>
883 * config/tc-arm.c (parse_cond): Covert to lowercase before matching.
885 2008-05-21 I-Jui Sung <ijsung@gmail.com>
887 * config/tc-arm.c (arm_cpus): Add Faraday ARMv4 and ARMv5TE
888 compatible cores: fa526, fa626, fa626te, fa726te.
889 * doc/c-arm.texi (ARM Opts): Add -mcpu={fa526, fa626, fa626te,
892 2008-05-14 Alan Modra <amodra@bigpond.net.au>
894 * Makefile.am: Run "make dep-am".
895 * Makefile.in: Regenerate.
896 * doc/Makefile.in: Regenerate.
897 * po/POTFILES.in: Regenerate.
899 2008-05-09 Catherine Moore <clm@codesourcery.com>
901 * config/tc-mips.c (mips_frob_file): Don't match MIPS16 relocs
902 with non-MIPS16 relocs.
904 2008-05-09 Chao-ying Fu <fu@mips.com>
906 * config/tc-mips.c (md_begin): Use strncmp to compare TARGET_OS, in
907 case that some characters append at the end of the name.
909 (s_change_sec): Likewise.
910 (md_section_align): Likewise.
912 2008-05-07 Bob Wilson <bob.wilson@acm.org>
914 * config/tc-xtensa.c (xtensa_create_property_segments): Use
915 xtensa_make_property_section instead of xtensa_get_property_section.
916 (xtensa_create_xproperty_segments): Likewise.
918 2008-05-02 H.J. Lu <hongjiu.lu@intel.com>
920 * NEWS: Mention XSAVE, EPT and MOVBE.
922 * config/tc-i386.c (cpu_arch): Add .movbe and .ept.
923 (md_show_usage): Add .movbe and .ept.
925 * doc/c-i386.texi: Add movbe and ept to -march=. Document
928 2008-04-29 David S. Miller <davem@davemloft.net>
930 * config/tc-sparc.c (v9a_asr_table): Fix order of softint entries.
932 2008-04-28 Adam Nemet <anemet@caviumnetworks.com>
934 * config/tc-mips.c (file_mips_soft_float, file_mips_single_float):
936 (OPTION_ELF_BASE): Make room for new option macros.
937 (OPTION_SOFT_FLOAT, OPTION_HARD_FLOAT, OPTION_SINGLE_FLOAT,
938 OPTION_DOUBLE_FLOAT): New option macros.
939 (md_longopts): Add msoft-float, mhard-float, msingle-float and
941 (md_parse_option): Handle OPTION_SINGLE_FLOAT,
942 OPTION_DOUBLE_FLOAT, OPTION_SOFT_FLOAT and OPTION_HARD_FLOAT.
943 (md_show_usage): Add -msoft-float, -mhard-float, -msingle-float
945 (struct mips_set_options): New fields soft_float and single_float.
946 (mips_opts): Initialized them. Add comment for each field
948 (mips_after_parse_args): Set them based on file_mips_soft_float
949 and file_mips_single_float.
950 (s_mipsset): Add support for `.set softfloat', `.set hardfloat',
951 `.set singlefloat' and `.set doublefloat'.
952 (is_opcode_valid): New function to invoke OPCODE_IS_MEMBER.
953 Handle single-float and soft-float instructions here.
954 (macro_build, mips_ip): Use it instead of OPCODE_IS_MEMBER.
955 (is_opcode_valid_16): New function.
956 (mips16_ip): Use it instead of OPCODE_IS_MEMBER.
957 (macro) <M_LDC1_AB, M_SDC1_AB, M_L_DOB, M_L_DAB, M_S_DAB,
958 M_S_DOB>: Remove special-casing of r4650.
959 * doc/c-mips.texi (-march=): Add Octeon.
960 (MIPS Opts): Document -msoft-float and -mhard-float. Document
961 -msingle-float and -mdouble-float.
962 (MIPS floating-point): New section. Document `.set softfloat' and
963 `.set hardfloat'. Document `.set singlefloat' and `.set
966 2008-04-25 David S. Miller <davem@davemloft.net>
968 * config/tc-sparc.c: Accept 'softint_clear' and 'softint_set'
971 * doc/c-sparc.texi: Consistently refer to architecture 'versions',
972 rather than occaisionally 'levels'. Consistently refer to Sun's
973 UNIX variant as SunOS, every version of Solaris is also SunOS.
974 Document new 'softint_clear' and 'softint_set' aliases. Clarify
975 which architecture versions support '%dcr', '%cq', and '%gl'. Add
976 section on 32-bit/64-bit opcode translations.
978 2008-04-23 Mike Frysinger <vapier@gentoo.org>
980 * Makefile.am (OBJ_FORMAT_CFILES): Add config/obj-fdpicelf.c.
981 (OBJ_FORMAT_HFILES): Add config/obj-fdpicelf.h.
982 (obj-fdpicelf.o): Define.
983 * Makefile.in: Regenerate.
984 * configure.tgt: Set bfd_gas to yes when fmt is fdpicelf.
986 (bfin-*-linux-uclibc): New; set fmt to fdpicelf and em to linux.
987 (bfin-*-uclinux*): New; set fmt to elf and em to linux.
988 * config/obj-fdpicelf.c: New.
989 * config/obj-fdpicelf.h: Likewise.
990 * config/tc-bfin.c (bfin_flags, bfin_pic_flag): Set default based on
991 the OBJ_FDPIC_ELF define.
992 (OPTION_NOPIC): Define.
993 (md_longopts): Add mnopic and mno-fdpic.
994 (md_parse_option): Handle OPTION_NOPIC.
996 2008-04-23 Paolo Bonzini <bonzini@gnu.org>
998 * aclocal.m4: Regenerate.
999 * configure: Regenerate.
1001 2008-04-23 David S. Miller <davem@davemloft.net>
1003 * config/tc-sparc.c (v9a_asr_table): Add missing
1004 'stick' and 'stick_cmpr', and document ordering rules
1006 (tc_gen_reloc): Accept BFD_RELOC_SPARC_PC22 and
1007 BFD_RELOC_SPARC_PC10.
1008 * doc/c-sparc.texi: New section on Sparc constants.
1009 Add documentation for %stick and %stick_cmpr.
1011 2008-04-22 David S. Miller <davem@davemloft.net>
1013 * config/obj-elf.c (obj_elf_section_type): Add prototype
1014 before obj_elf_section_word and add 'warn' arg.
1015 (obj_elf_section_word): Add type pointer arg, and if no #SECTION
1016 is matched, try checking for #SECTION_TYPE.
1017 (obj_elf_section): Adjust for new args.
1018 (obj_elf_type_name): New function.
1019 (obj_elf_type): Call it, and accept STT_foo number strings
1020 in .type statements as output by SunPRO compiler.
1022 2008-04-22 H.J. Lu <hongjiu.lu@intel.com>
1024 * config/tc-i386.c (md_assemble): Don't check SSE instructions
1027 2008-04-18 David S. Miller <davem@davemloft.net>
1029 * doc/c-sparc.texi: Add syntax section.
1031 2008-04-18 H.J. Lu <hongjiu.lu@intel.com>
1033 * config/tc-i386.c (build_modrm_byte): Don't check FMA to swap
1034 REG and NDS for instructions with immediate operand.
1036 2008-04-18 H.J. Lu <hongjiu.lu@intel.com>
1038 * config/tc-i386.c (build_modrm_byte): Swap REG and NDS for
1041 2008-04-16 David S. Miller <davem@davemloft.net>
1043 * config/tc-sparc.c (sparc_ip): Add support for gotdata mnemonics
1044 and relocation generation.
1045 (tc_gen_reloc): Likewise.
1047 2008-04-15 Andrew Stubbs <andrew.stubbs@st.com>
1049 * config/tc-sh.c (md_apply_fix): Make sure BFD_RELOC_SH_PCRELIMM8BY4
1050 relocations are properly aligned, and not negative.
1052 2008-04-15 Khem Raj <kraj@mvista.com>
1054 * doc/tc-arm.texi: Fix fnstart and fnend directive names.
1056 2008-04-14 Edmar Wienskoski <edmar@freescale.com>
1058 * config/tc-ppc.c (parse_cpu): Handle "e500mc". Extend "e500" to
1059 accept e500mc instructions.
1060 (md_show_usage): Document -me500mc.
1062 2008-04-11 Nick Clifton <nickc@redhat.com>
1064 * listing.c (print_timestamp): Use localtime rather than
1065 localtime_r since not all build environments provide the latter.
1067 2008-04-10 H.J. Lu <hongjiu.lu@intel.com>
1069 * NEWS: Mention -msse-check=[none|error|warning].
1071 * config/tc-i386.c (sse_check): New.
1072 (OPTION_MSSE_CHECK): Likewise.
1073 (md_assemble): Check SSE instructions if needed.
1074 (md_longopts): Add -msse-check.
1075 (md_parse_option): Handle OPTION_MSSE_CHECK.
1076 (md_show_usage): Show -msse-check=[none|error|warning].
1078 * doc/c-i386.texi: Document -msse-check=[none|error|warning].
1080 2008-04-10 Santiago Urueña <suruena@gmail.com>
1082 * listing.c: Add -ag listing flag to show general information in
1083 listings such as gas version, passed options, and time stamp.
1084 (listing_general_info): New function.
1085 (print_options): New function.
1086 (print_single_option): New function.
1087 (print_timestamp): New function.
1088 (MAX_DATELEN): Define.
1089 (listing_print): Add call to listing_general_info.
1090 * listing.h (LISTING_GENERAL): Define.
1091 (listing_print): Add new parameter.
1092 * as.c (show_usage): Print new switch.
1093 (parse_args): Parse new switch.
1094 (main): Pass command line on to listing_print.
1095 * NEWS: Mention this new feature.
1096 * doc/as.texinfo: Document the new sub-option.
1098 2008-04-08 Alan Modra <amodra@bigpond.net.au>
1100 * dwarf2dbg.c (dwarf2_emit_insn): Simplify test before dwarf2_where
1101 call. Delete out of date comment.
1102 (dwarf2_consume_line_info): Always clear dwarf2_loc_directive_seen.
1103 (dwarf2_emit_label): Don't emit unless there has been a previous
1104 .file or we are outputting assembler generated debug.
1105 dwarf2_consume_line_info after emitting line info, not before.
1106 (out_debug_info): Simplify files_in_use test.
1108 2008-04-07 H.J. Lu <hongjiu.lu@intel.com>
1110 * config/tc-i386.c (parse_real_register): Return AVX register
1111 only if AVX is enabled.
1113 2008-04-07 Kaz Kojima <kkojima@rr.iij4u.or.jp>
1116 * config/tc-sh64.c (shmedia_md_pcrel_from_section): Use
1117 md_pcrel_from_section for BFD_RELOC_64 and BFD_RELOC_64_PCREL.
1119 2008-04-04 Adrian Bunk <bunk@stusta.de>
1120 Bob Wilson <bob.wilson@acm.org>
1122 * config/tc-xtensa.c (xg_apply_fix_value): Check return code from
1123 call to decode_reloc.
1125 2008-04-04 H.J. Lu <hongjiu.lu@intel.com>
1127 * NEWS: Mention XSAVE. Change CLMUL to PCLMUL.
1129 * config/tc-i386.c (cpu_arch): Add .pclmul.
1130 (md_show_usage): Replace clmul with pclmul.
1131 * doc/c-i386.texi: Likewise.
1133 2008-04-03 H.J. Lu <hongjiu.lu@intel.com>
1135 * NEWS: Mention AES, CLMUL, AVX/FMA and -msse2avx.
1137 * doc/c-i386.texi: Add avx, aes, clmul and fma to -march=.
1138 Document -msse2avx, .avx, .aes, .clmul and .fma.
1140 * config/tc-i386.c (YMMWORD_MNEM_SUFFIX): New.
1141 (vex_prefix): Likewise.
1142 (sse2avx): Likewise.
1143 (CPU_FLAGS_ARCH_MATCH): Likewise.
1144 (CPU_FLAGS_64BIT_MATCH): Likewise.
1145 (CPU_FLAGS_32BIT_MATCH): Likewise.
1146 (CPU_FLAGS_PERFECT_MATCH): Likewise.
1148 (vex_imm4): Likewise.
1149 (fits_in_imm4): Likewise.
1150 (build_vex_prefix): Likewise.
1151 (VEX_check_operands): Likewise.
1152 (bad_implicit_operand): Likewise.
1153 (OPTION_MSSE2AVX): Likewise.
1154 (T_YMMWORD): Likewise.
1155 (_i386_insn): Add vex.
1156 (cpu_arch): Add .avx, .aes, .clmul and .fma.
1157 (cpu_flags_match): Changed to take a pointer to const template.
1158 Enable encoding SSE instructions with VEX prefix for -msse2avx.
1159 (match_mem_size): Also check ymmword.
1160 (operand_type_match): Clear ymmword.
1161 (md_begin): Allow '_' in mnemonic.
1162 (type_names): Add OPERAND_TYPE_VEX_IMM4.
1163 (process_immext): Update assert.
1164 (md_assemble): Don't call process_immext if sse2avx and immext
1165 are true. Call build_vex_prefix if vex is true.
1166 (parse_insn): Updated for cpu_flags_match.
1167 (swap_operands): Handle 5 operands.
1168 (match_template): Handle 5 operands. Updated for cpu_flags_match.
1169 Check regymm. Call VEX_check_operands. Handle YMMWORD_MNEM_SUFFIX.
1170 (process_suffix): Handle YMMWORD_MNEM_SUFFIX.
1171 (check_byte_reg): Check regymm.
1172 (process_operands): Duplicate the destination register for
1173 -msse2avx if needed.
1174 (build_modrm_byte): Updated for instructions with VEX encoding.
1175 (output_insn): Output VEX prefix if needed.
1176 (md_longopts): Add msse2avx.
1177 (md_parse_option): Handle OPTION_MSSE2AVX.
1178 (md_show_usage): Add avx, aes, clmul, fma and -msse2avx.
1179 (intel_e09): Support YMMWORD.
1180 (intel_e11): Likewise.
1181 (intel_get_token): Likewise.
1183 2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
1185 * config/tc-avr.c (mcu_types): Add attiny167.
1186 * doc/c-avr.texi: Likewise.
1188 2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
1190 * config/tc-avr.c (mcu_types): Add atmega32u4.
1191 * doc/c-avr.texi: Likewise.
1193 2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
1195 * config/tc-avr.c (mcu_types): Add atmega32c1.
1196 * doc/c-avr.texi: Likewise.
1198 2008-03-28 Paul Brook <paul@codesourcery.com>
1200 * config/tc-arm.c (parse_neon_mov): Parse register before immediate
1201 to avoid spurious symbols.
1203 2008-03-28 Nathan Sidwell <nathan@codesourcery.com>
1205 * config/tc-m68k.c (md_convert_frag_1): Replace as_fatal with
1208 2008-03-27 Eric B. Weddington <eric.weddington@atmel.com>
1210 * config/tc-avr.c (mcu_types): Add atmega32m1.
1211 * doc/c-avr.texi: Likewise.
1213 2008-03-27 Ineiev <ineiev@yahoo.co.uk>
1215 * config/tc-arm.c (do_neon_cvt): Move variable declarations to
1217 (do_neon_ext): Fix sign of comparison.
1219 2008-03-26 Bernd Schmidt <bernd.schmidt@analog.com>
1221 From Jie Zhang <jie.zhang@analog.com>
1222 * config/bfin-parse.y (asm_1): Check AREGS in comparison
1223 instructions. And call yyerror when comparing PREG with
1225 (check_macfunc_option): New.
1226 (check_macfuncs): Check option by calling check_macfunc_option.
1227 Fix comparison always true warnings. Both scalar instructions
1228 of vector instruction must share the same mode option. Only allow
1229 option mode at the end of the second instruction of the vector.
1230 (asm_1): Check option by calling check_macfunc_option.
1232 * config/bfin-parse.y (check_macfunc_option): Allow (IU)
1233 option for multiply and multiply-accumulate to data register
1235 (check_macfuncs): Don't check if accumulator matches the data register
1237 (assign_macfunc): Check if accumulator matches the
1238 data register in each rule that moves to the data
1241 * config/tc-bfin.c (bfin_start_line_hook): Localize the labels
1242 generated for LOOP_BEGIN and LOOP_END instructions.
1243 (bfin_gen_loop): Likewise.
1245 2008-03-19 Andreas Krebbel <krebbel1@de.ibm.com>
1247 * config/tc-s390.c (md_parse_option): z10 option added.
1249 2008-03-17 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
1251 * aclocal.m4: Regenerate.
1252 * configure: Likewise.
1253 * Makefile.in: Likewise.
1254 * doc/Makefile.in: Likewise.
1256 2008-03-17 Adrian Bunk <bunk@stusta.de>
1259 * config/tc-hppa.c (is_same_frag): Delete.
1261 2008-03-14 Sterling Augustine <sterling@tensilica.com>
1263 * config/tc-xtensa.h (xtensa_relax_statesE): Update comment for
1264 RELAX_LOOP_END_ADD_NOP.
1266 2008-03-13 Evandro Menezes <evandro@yahoo.com>
1269 * read.c (s_mexit): Warn if attempting to exit a macro when not
1270 inside a macro definition.
1272 2008-03-13 Alan Modra <amodra@bigpond.net.au>
1274 * Makefile.am: Run "make dep-am".
1275 * Makefile.in: Regenerate.
1276 * configure: Regenerate.
1278 2008-03-09 Paul Brook <paul@codesourcery.com>
1280 * config/tc-arm.c (arm_cpu_option_table): Add cortex-a9.
1281 * doc/c-arm.texi: Add cortex-a9.
1283 2008-03-09 Paul Brook <paul@codesourcery.com>
1285 * config/tc-arm.c (fpu_vfp_ext_d32): New vairable.
1286 (parse_vfp_reg_list, encode_arm_vfp_reg): Use it.
1287 (arm_option_cpu_value): Add vfpv3-d16, vfpv2 and vfpv3.
1288 (aeabi_set_public_attributes): Handle Tag_VFP_arch=VFPV3-D16.
1289 * doc/c-arm.texi: Document new ARM FPU variants.
1291 2008-03-07 Paul Brook <paul@codesourcery.com>
1293 * config/tc-arm.c (md_apply_fix): Use correct offset range.
1295 2008-03-07 Alan Modra <amodra@bigpond.net.au>
1297 * config/tc-ppc.c (ppc_setup_opcodes): Tidy. Add code to test
1298 for strict ordering of powerpc_opcodes, but disable for now.
1300 2008-03-04 Paul Brook <paul@codesourcery.com>
1302 * config/tc-arm.c (arm_ext_barrier, arm_ext_msr): New.
1303 (arm_ext_v7m): Rename...
1304 (arm_ext_m): ... to this. Include v6-M.
1305 (do_t_add_sub): Allow narrow low-reg non flag setting adds.
1306 (do_t_mrs, do_t_msr, aeabi_set_public_attributes): Use arm_ext_m.
1307 (md_assemble): Allow wide msr instructions.
1308 (insns): Add classifications for v6-m instructions.
1309 (arm_cpu_option_table): Add cortex-m1.
1310 (arm_arch_option_table): Add armv6-m.
1311 (cpu_arch): Add ARM_ARCH_V6M. Fix numbering of other v6 variants.
1313 2008-03-03 Sterling Augustine <sterling@tensilica.com>
1314 Bob Wilson <bob.wilson@acm.org>
1316 * config/tc-xtensa.c (xtensa_num_pipe_stages): New.
1317 (md_begin): Initialize it.
1318 (resources_conflict): Use it.
1320 2008-03-03 Sterling Augustine <sterling@tensilica.com>
1322 * config/tc-xtensa.h (RELAX_XTENSA_NONE): New.
1324 2008-03-03 Denys Vlasenko <vda.linux@googlemail.com>
1325 H.J. Lu <hongjiu.lu@intel.com>
1328 * read.c (pseudo_set): Don't allow global register symbol.
1330 * symbols.c (S_SET_EXTERNAL): Don't allow register symbol
1333 2008-03-03 H.J. Lu <hongjiu.lu@intel.com>
1336 * write.c (write_object_file): Don't allow symbols which were
1337 equated to register. Stop if there is an error.
1339 2008-03-01 Alan Modra <amodra@bigpond.net.au>
1341 * config/tc-ppc.h (struct _ppc_fix_extra): New.
1343 (TC_FIX_TYPE, TC_INIT_FIX_DATA): Define.
1344 * config/tc-ppc.c (ppu_cpu): Make global.
1345 (ppc_insert_operand): Add ppu_cpu parameter.
1346 (md_assemble): Adjust for above change.
1347 (md_apply_fix): Pass tc_fix_data.ppc_cpu to ppc_insert_operand.
1349 2008-02-22 Nick Clifton <nickc@redhat.com>
1351 * config/tc-arm.c (do_bx): Only test EF_ARM_EABI_VERSION on ELF
1352 targeted ARM ports, otherwise just skip generating the reloc.
1354 2008-02-18 H.J. Lu <hongjiu.lu@intel.com>
1356 * doc/c-i386.texi: Update -march= and .arch.
1358 2008-02-18 Nick Clifton <nickc@redhat.com>
1360 * config/tc-mn10300.c (has_known_symbol_location): New function.
1361 Do not regard weak symbols as having a known location.
1362 (md_estimate_size_before_relax): Use new function.
1363 (md_pcrel_from): Do not compute a pcrel against a weak symbol.
1365 2008-02-18 Jan Beulich <jbeulich@novell.com>
1367 * config/tc-i386.c (match_template): Disallow 'l' suffix when
1368 currently selected CPU has no 32-bit support.
1369 (parse_real_register): Do not return registers not available on
1370 currently selected CPU.
1372 2008-02-16 H.J. Lu <hongjiu.lu@intel.com>
1374 * config/tc-i386.c (process_immext): Fix format.
1376 2008-02-16 H.J. Lu <hongjiu.lu@intel.com>
1378 * config/tc-i386.c (inoutportreg): New.
1379 (process_immext): New.
1380 (md_assemble): Use it.
1381 (update_imm): Use imm16 and imm32s.
1382 (i386_att_operand): Use inoutportreg.
1384 2008-02-14 H.J. Lu <hongjiu.lu@intel.com>
1386 * config/tc-i386.c (operand_type_all_zero): New.
1387 (operand_type_set): Likewise.
1388 (operand_type_equal): Likewise.
1389 (cpu_flags_all_zero): Likewise.
1390 (cpu_flags_set): Likewise.
1391 (cpu_flags_equal): Likewise.
1392 (UINTS_ALL_ZERO): Removed.
1393 (UINTS_SET): Likewise.
1394 (UINTS_CLEAR): Likewise.
1395 (UINTS_EQUAL): Likewise.
1396 (cpu_flags_match): Updated.
1397 (smallest_imm_type): Likewise.
1398 (set_cpu_arch): Likewise.
1399 (md_assemble): Likewise.
1400 (optimize_imm): Likewise.
1401 (match_template): Likewise.
1402 (process_suffix): Likewise.
1403 (update_imm): Likewise.
1404 (process_drex): Likewise.
1405 (process_operands): Likewise.
1406 (build_modrm_byte): Likewise.
1407 (i386_immediate): Likewise.
1408 (i386_displacement): Likewise.
1409 (i386_att_operand): Likewise.
1410 (parse_real_register): Likewise.
1411 (md_parse_option): Likewise.
1412 (i386_target_format): Likewise.
1414 2008-02-14 Dimitry Andric <dimitry@andric.com>
1417 * config/tc-arm.c (s_arm_unwind_save): Advance the input line
1418 pointer past the comma after parsing a floating point register
1421 2008-02-14 Hakan Ardo <hakan@debian.org>
1424 * config/tc-avr.c (mcu_types): Change the ISA tyoe of the attiny26
1426 (avr_operand): Disallow post-increment addressing in the lpm
1427 instruction for the attiny26.
1429 2008-02-13 Jan Beulich <jbeulich@novell.com>
1431 * config/tc-i386.c (parse_real_register): Don't return 'FLAT'
1432 if not in Intel mode.
1433 (i386_intel_operand): Ignore segment overrides in immediate and
1435 (intel_e11): Range-check i.mem_operands before use as array
1436 index. Filter out FLAT for uses other than as segment override.
1437 (intel_get_token): Remove broken promotion of "FLAT:" to mean
1440 2008-02-13 Jan Beulich <jbeulich@novell.com>
1442 * config/tc-i386.c (intel_e09): Also special-case 'bound'.
1444 2008-02-13 Jan Beulich <jbeulich@novell.com>
1446 * config/tc-i386.c (allow_pseudo_reg): New.
1447 (parse_real_register): Check for NULL just once. Allow all
1448 register table entries when allow_pseudo_reg is non-zero.
1449 Don't allow any registers without type when allow_pseudo_reg
1451 (tc_x86_regname_to_dw2regnum): Replace with ...
1452 (tc_x86_parse_to_dw2regnum): ... this.
1453 (tc_x86_frame_initial_instructions): Adjust for above change.
1454 * config/tc-i386.h (tc_regname_to_dw2regnum): Remove.
1455 (tc_parse_to_dw2regnum): New.
1456 (tc_x86_regname_to_dw2regnum): Replace with ...
1457 (tc_x86_parse_to_dw2regnum): ... this.
1458 * dw2gencfi.c (tc_parse_to_dw2regnum): New, broken out of ...
1459 (cfi_parse_reg): ... this. Use tc_parse_to_dw2regnum. Adjust
1462 2008-02-12 Nick Clifton <nickc@redhat.com>
1464 * config/tc-tic4x.c (tic4x_insn_insert): Add const qualifier to
1466 (tic4x_insn_add): Likewise.
1467 (md_begin): Drop cast that was discarding a const qualifier.
1468 * config/tc-d30v.c (get_reloc): Add const qualifier to op
1470 (build_insn): Drop cast that was discarding a const qualifier.
1472 2008-02-11 H.J. Lu <hongjiu.lu@intel.com>
1474 * config/tc-i386.c (cpu_arch): Add .xsave.
1475 (md_show_usage): Add .xsave.
1477 * doc/c-i386.texi: Add xsave to -march=.
1479 2008-02-07 Alan Modra <amodra@bigpond.net.au>
1481 * read.c (s_weakref): Don't pass unadorned NULL to concat.
1482 * config/tc-i386.c (set_cpu_arch, md_parse_option): Likewise.
1484 2008-02-05 Sterling Augustine <sterling@tensilica.com>
1486 * config/tc-xtensa.c (relax_frag_immed): Change internal consistency
1487 checks into assertions. When relaxation produces an operation that
1488 does not fit in the current FLIX instruction, make sure that the
1489 operation is relaxed as needed to account for being placed following
1490 the current instruction.
1492 2008-02-04 H.J. Lu <hongjiu.lu@intel.com>
1495 * configure: Regenerated.
1497 2008-02-04 Adam Nemet <anemet@caviumnetworks.com>
1499 * config/tc-mips.c (mips_cpu_info_table): Add Octeon.
1501 2008-01-31 Marc Gauthier <marc@tensilica.com>
1503 * configure.tgt (xtensa*-*-*): Recognize processor variants.
1505 2008-01-25 Kai Tietz <kai.tietz@onevision.com>
1507 * read.c: (emit_expr): Correct for mingw use of printf size
1510 2008-01-24 Bob Wilson <bob.wilson@acm.org>
1512 * doc/c-xtensa.texi (Xtensa Syntax): Clarify handling of opcodes that
1513 can only be encoded in FLIX instructions but are not specified as such.
1514 (Xtensa Automatic Alignment): Remove obsolete comment about debugging
1517 2008-01-24 H.J. Lu <hongjiu.lu@intel.com>
1519 * NEWS: Mention new command line options for x86 targets.
1521 2008-01-23 H.J. Lu <hongjiu.lu@intel.com>
1523 * config/tc-i386.c (md_show_usage): Replace tabs with spaces.
1525 2008-01-23 Eric B. Weddington <eric.weddington@atmel.com>
1527 * config/tc-avr.c (mcu_types): Change opcode set for at86rf401.
1529 2008-01-23 H.J. Lu <hongjiu.lu@intel.com>
1531 * config/tc-i386.c (md_show_usage): Show more processors for
1534 2008-01-22 H.J. Lu <hongjiu.lu@intel.com>
1536 * config/tc-i386.c (i386_target_format): Remove cpummx2.
1538 2008-01-22 H.J. Lu <hongjiu.lu@intel.com>
1540 * config/tc-i386.c (XXX_PREFIX): Moved from tc-i386.h.
1541 (XXX_MNEM_SUFFIX): Likewise.
1542 (END_OF_INSN): Likewise.
1543 (templates): Likewise.
1544 (modrm_byte): Likewise.
1545 (rex_byte): Likewise.
1546 (DREX_XXX): Likewise.
1547 (drex_byte): Likewise.
1548 (sib_byte): Likewise.
1549 (processor_type): Likewise.
1550 (arch_entry): Likewise.
1551 (cpu_sub_arch_name): Remove const.
1552 (cpu_arch): Add .vmx and .smx.
1553 (set_cpu_arch): Append cpu_sub_arch_name.
1554 (md_parse_option): Support -march=CPU[,+EXTENSION...].
1555 (md_show_usage): Updated.
1557 * config/tc-i386.h (XXX_PREFIX): Moved to tc-i386.c.
1558 (XXX_MNEM_SUFFIX): Likewise.
1559 (END_OF_INSN): Likewise.
1560 (templates): Likewise.
1561 (modrm_byte): Likewise.
1562 (rex_byte): Likewise.
1563 (DREX_XXX): Likewise.
1564 (drex_byte): Likewise.
1565 (sib_byte): Likewise.
1566 (processor_type): Likewise.
1567 (arch_entry): Likewise.
1569 * doc/as.texinfo: Update i386 -march option.
1571 * doc/c-i386.texi: Update -march= for ISA.
1573 2008-01-18 Bob Wilson <bob.wilson@acm.org>
1575 * config/tc-xtensa.c (xtensa_leb128): New function.
1576 (md_pseudo_table): Use it for sleb128 and uleb128.
1577 (is_leb128_expr): New internal flag.
1578 (xtensa_symbol_new_hook): Check new flag.
1580 2008-01-16 Eric B. Weddington <eric.weddington@atmel.com>
1582 * config/tc-avr.c (mcu_types): Change opcode set for avr3,
1583 at90usb82, at90usb162.
1584 * doc/c-avr.texi: Change architecture grouping for at90usb82,
1586 These changes support the new avr35 architecture group in gcc.
1588 2008-01-15 H.J. Lu <hongjiu.lu@intel.com>
1590 * config/tc-i386.c (md_assemble): Also zap movzx and movsx
1591 suffix for AT&T syntax.
1593 2008-01-14 H.J. Lu <hongjiu.lu@intel.com>
1595 * config/tc-i386.c (match_reg_size): New.
1596 (match_mem_size): Likewise.
1597 (operand_size_match): Likewise.
1598 (operand_type_match): Also clear all size fields.
1599 (match_template): Skip Intel syntax when in AT&T syntax.
1600 Call operand_size_match to check operand size.
1601 (i386_att_operand): Set the mem field to 1 for memory
1603 (i386_intel_operand): Likewise.
1605 2008-01-12 H.J. Lu <hongjiu.lu@intel.com>
1608 * config/tc-i386.c (_i386_insn): Update comment.
1609 (operand_type_match): Also clear unspecified.
1610 (operand_type_register_match): Likewise.
1611 (parse_operands): Initialize unspecified.
1612 (i386_intel_operand): Likewise.
1613 (match_template): Check memory and accumulator operand size.
1614 (i386_att_operand): Clear unspecified on register operand.
1615 (intel_e11): Likewise.
1616 (intel_e09): Set operand size and clean unspecified for
1619 2008-01-11 Andreas Schwab <schwab@suse.de>
1621 * read.c (s_space): Declare `repeat' as offsetT.
1623 2008-01-10 H.J. Lu <hongjiu.lu@intel.com>
1625 * config/tc-i386.c (match_template): Check processor support
1628 2008-01-10 H.J. Lu <hongjiu.lu@intel.com>
1630 * config/tc-i386.c (match_template): Continue if processor
1633 2008-01-09 Alexandre Oliva <aoliva@redhat.com>
1635 * config/tc-ia64.c (ia64_convert_frag): Zero-initialize room for
1636 unwind personality function address.
1638 2008-01-09 Bob Wilson <bob.wilson@acm.org>
1640 * dwarf2dbg.c (out_sleb128): Delete.
1641 (size_fixed_inc_line_addr, emit_fixed_inc_line_addr): New.
1642 (out_fixed_inc_line_addr): Delete.
1643 (relax_inc_line_addr, dwarf2dbg_estimate_size_before_relax): Call new
1644 size_fixed_inc_line_addr if DWARF2_USE_FIXED_ADVANCE_PC is set.
1645 (dwarf2dbg_convert_frag): Likewise for emit_fixed_inc_line_addr.
1646 (process_entries): Remove calls to out_fixed_inc_line_addr. When
1647 DWARF2_USE_FIXED_ADVANCE_PC is set, call relax_inc_line_addr.
1648 * read.h (emit_expr_fix): New prototype.
1649 * read.c (emit_expr): Move code to emit_expr_fix and use it here.
1650 (emit_expr_fix): New.
1652 2008-01-09 H.J. Lu <hongjiu.lu@intel.com>
1654 * config/tc-i386.c (match_template): Check register size
1655 only when size of operands can be encoded the canonical way.
1657 2008-01-08 H.J. Lu <hongjiu.lu@intel.com>
1659 * config/tc-i386.c (i386_operand): Renamed to ...
1660 (i386_att_operand): This.
1661 (parse_operands): Updated.
1663 2008-01-05 H.J. Lu <hongjiu.lu@intel.com>
1665 * doc/c-i386.texi: Update .att_mnemonic and .intel_mnemonic.
1667 * config/tc-i386.c (set_intel_mnemonic): Set intel_mnemonic
1669 (md_assemble): Remove Intel mode workaround.
1670 (match_template): Check support for old gcc, AT&T mnemonic
1672 (md_parse_option): Don't set intel_mnemonic to 0 for
1675 2008-01-04 H.J. Lu <hongjiu.lu@intel.com>
1677 * config/tc-i386.h: Update copyright to 2008.
1679 2008-01-04 Nick Clifton <nickc@redhat.com>
1681 * config/tc-ppc.c (parse_cpu): Preserve the settings of the
1682 PPC_OPCODE_ALTIVEC and PPC_OPCODE_SPE flags.
1684 2008-01-03 H.J. Lu <hongjiu.lu@intel.com>
1686 * config/tc-i386.c (md_assemble): Use !intel_mnemonic instead
1689 2008-01-03 H.J. Lu <hongjiu.lu@intel.com>
1691 * gas/config/tc-i386.c (cpu_arch_flags_not): Removed.
1692 (cpu_flags_not): Likewise.
1693 (cpu_flags_match): Updated to check 64bit and arch.
1694 (set_code_flag): Remove cpu_arch_flags_not.
1695 (set_16bit_gcc_code_flag): Likewise.
1696 (set_cpu_arch): Likewise.
1697 (md_begin): Likewise.
1698 (parse_insn): Call cpu_flags_match to check 64bit and arch.
1699 (match_template): Likewise.
1701 2008-01-03 Jakub Jelinek <jakub@redhat.com>
1703 * config/tc-i386.c (process_drex): Initialize modrm_reg and
1704 modrm_regmem to 0 instead of None.
1706 2008-01-03 H.J. Lu <hongjiu.lu@intel.com>
1708 * config/tc-i386.c (match_template): Use the xmmword field
1711 2008-01-02 H.J. Lu <hongjiu.lu@intel.com>
1713 * config/tc-i386.c (process_suffix): Fix a typo.
1715 2008-01-02 H.J. Lu <hongjiu.lu@intel.com>
1718 * config/tc-i386.c (match_template): Handle XMMWORD_MNEM_SUFFIX.
1719 Check memory size in Intel mode.
1720 (process_suffix): Handle XMMWORD_MNEM_SUFFIX.
1721 (intel_e09): Likewise.
1723 * config/tc-i386.h (XMMWORD_MNEM_SUFFIX): New.
1725 2008-01-02 Catherine Moore <clm@codesourcery.com>
1727 * config/tc-mips.c (mips_ip): Check operands on jalr instruction.
1729 For older changes see ChangeLog-2007
1735 version-control: never