1 2014-11-03 Nick Clifton <nickc@redhat.com>
4 2014-11-03 Nick Clifton <nickc@redhat.com>
5 * config/tc-msp430.c (msp430_srcoperand): Fix range test for
8 2014-10-30 Nick Clifton <nickc@redhat.com>
11 2014-10-30 Dr Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
12 * config/tc-aarch64.h (MAX_MEM_FOR_RS_ALIGN_CODE): Define to 7.
13 * config/tc-aarch64.c (aarch64_handle_align): Rewrite to handle
14 large alignments with a constant fragment size of
15 MAX_MEM_FOR_RS_ALIGN_CODE.
17 2014-10-29 Nick Clifton <nickc@redhat.com>
19 * po/uk.po: New Ukranian translation.
21 2014-10-28 Matthew Fortune <matthew.fortune@imgtec.com>
24 2014-10-22 Matthew Fortune <matthew.fortune@imgtec.com>
25 * doc/as.texinfo: Update the MIPS FP ABI descriptions.
26 * doc/c-mips.texi: Spell check and correct throughout.
28 2014-10-28 Matthew Fortune <matthew.fortune@imgtec.com>
31 2014-10-21 Maciej W. Rozycki <macro@codesourcery.com>
32 * config/tc-mips.c (s_insn): Set file options.
34 2014-10-28 Matthew Fortune <matthew.fortune@imgtec.com>
37 2014-10-17 Matthew Fortune <matthew.fortune@imgtec.com>
38 * doc/c-mips.texi: Fix bad @value references.
40 2014-10-28 Alan Modra <amodra@gmail.com>
42 2014-10-18 Alan Modra <amodra@gmail.com>
44 * write.c (adjust_reloc_syms): Don't allow symbols in reg_section
45 to be reduced to reg_section section symbol.
46 * gas/config/tc-i386.c (i386_finalize_immediate): Reject all
47 reg_section immediates.
49 2014-10-15 Chen Gang <gang.chen.5i5j@gmail.com>
50 * config/tc-tic4x.c (md_assemble): Correct strncat size.
52 2014-10-15 Tristan Gingold <gingold@adacore.com>
54 * configure: Regenerate.
56 2014-10-14 Tristan Gingold <gingold@adacore.com>
58 * NEWS: Add marker for 2.25.
60 2014-10-14 Alan Modra <amodra@gmail.com>
63 * config/tc-i386.c (fits_in_signed_long): Use unsigned param and
64 expression to avoid signed overflow.
65 (fits_in_signed_byte, fits_in_unsigned_byte, fits_in_unsigned_word,
66 fits_in_signed_word, fits_in_unsigned_long): Similarly.
67 * expr.c (operand <'-'>): Avoid signed overflow.
68 * read.c (s_comm_internal): Likewise.
70 2014-10-14 Alan Modra <amodra@gmail.com>
72 * config/tc-sparc.c (sparc_md_end): Fix unused variable warnings.
74 2014-10-09 Jose E. Marchesi <jose.marchesi@oracle.com>
76 * config/tc-sparc.c (v9a_asr_table): Entry for %cps removed.
77 (sparc_arch_table): Remove the HWCAP_RANDOM, HWCAP_TRANS and
78 HWCAP_ASI_CACHE_SPARING from the architectures using them.
87 (sparc_arch): Use the HWS_* macros. Fix the `sparc4' architecture
88 to cover the HWCAP_ASI_BLK_INIT and HWCAP_IMA capabilities.
89 (hwcap_seen): Variable widened to 64 bits.
90 (hwcap_allowed): Likewise.
91 (sparc_arch): new field `hwcap2_allowed'.
92 (sparc_arch_table): provide hwcap2_allowed values for existing
94 (sparc_md_end): Add a HWCAPS2 object attribute to the elf object
95 in case any of the HWCAP2_* caps are used.
96 (sparc_ip): Take into account the new hwcaps2 bitmap to build the
97 list of seen/allowed hwcaps.
98 (get_hwcap_name): Argument widened to 64 bits to handle HWCAP2
100 (HWS_VM): New define.
102 (sparc_arch): New architectures `sparc5', `v9m' and `v8plusm'.
103 (v9a_asr_table): Add the %mwait (%asr28) ancillary state register
105 (sparc_ip): Handle the %mcdper ancillary state register as an
107 (sparc_ip): Handle } arguments as fdrd floating point registers
108 (double) that are the same than frs1.
109 * doc/c-sparc.texi (Sparc-Opts): Document the -Av9e, -Av8pluse and
110 -xarch=v9e command line options. Also fix the description of the
111 -Av9v and -Av8plusv command line options.
112 Document the -Av9m, -Av8plusm,-Asparc5, -xarch=v9m and
113 -xarch=sparc5 command line options.
115 2014-09-29 Terry Guo <terry.guo@arm.com>
117 * as.c (create_obj_attrs_section): Move it and call it from ...
118 * write.c (create_obj_attrs_section): ... here.
119 (subsegs_finish_section): Refactored.
121 2014-09-27 Alan Modra <amodra@gmail.com>
123 * dwarf2dbg.c (all_segs_hash): Delete.
124 (get_line_subseg): Delete last_seg, last_subseg, last_line_subseg.
125 Retrieve line_seg for section via seg_info.
126 * subsegs.h (segment_info_typet): Add dwarf2_line_seg.
128 2014-09-23 H.J. Lu <hongjiu.lu@intel.com>
131 * config/tc-i386.c (md_assemble): Disallow VEX/EVEX encoded
132 instructions in 16-bit mode.
134 2014-09-22 Alan Modra <amodra@gmail.com>
136 * config/tc-m68k.c (md_assemble): Add assert to work around
137 bogus trunk gcc warning.
138 * config/tc-pj.h (md_convert_frag): Warning fix.
139 * config/tc-xtensa.c (xg_assemble_vliw_tokens): Warning fix.
141 2014-09-17 Tristan Gingold <gingold@adacore.com>
143 * config/tc-arm.c (move_or_literal_pool, add_to_lit_pool): Use
144 bfd_int64_t instead of int64_t.
146 2014-09-16 Ilya Tocar <ilya.tocar@intel.com>
148 * config/tc-i386.c (evexrcig): New.
149 (build_evex_prefix): Force rounding bits.
150 (OPTION_MEVEXRCIG): New.
151 (md_longopts): Add mevexrcig.
152 (md_parse_option): Handle OPTION_MEVEXRCIG.
153 (md_show_usage): Document mevexrcig.
154 * doc/c-i386.texi (mevexrcig): Document new option.
156 2014-09-16 Kuan-Lin Chen <kuanlinchentw@gmail.com>
158 * config/tc-nds32.c (nds32_fsrs, nds32_fdrs, nds32_gprs): Remove.
159 (relax_table): Add new relaxation pattern.
160 (do_pseudo_la_internal, do_pseudo_ls_bhw): Expand for PIC suffix.
161 (do_pseudo_move, do_pseudo_neg, do_pseudo_pushpopm): Fix.
162 (get_range_type, nds32_elf_record_fixup_exp, nds32_get_align,
163 nds32_elf_build_relax_relation, md_assemble, invalid_prev_frag,
164 nds32_relax_frag, md_estimate_size_before_relax): Adjust relaxation.
165 (relocation_table): Remove.
166 (relax_ls_table): Load-store relaxation pattern.
167 (hint_map): Define-use chain pattern.
168 (nds32_find_reloc_table, nds32_match_hint_insn): Analysis
170 (nds32_parse_name): Parse PIC suffix.
171 * config/tc-nds32.h: Declare.
173 2014-09-15 H.J. Lu <hongjiu.lu@intel.com>
175 * config/tc-i386.c (OPTION_omit_lock_prefix): Renamed to ...
176 (OPTION_OMIT_LOCK_PREFIX): This.
177 (md_longopts): Updated.
178 (md_parse_option): Likewise.
180 2014-09-15 Andrew Bennett <andrew.bennett@imgtec.com>
181 Matthew Fortune <matthew.fortune@imgtec.com>
183 * config/tc-mips.c (mips_nan2008): New static global.
184 (mips_flag_nan2008): Removed.
185 (LL_SC_FMT): New define.
186 (COP12_FMT): Updated.
187 (ISA_IS_R6): New define.
188 (ISA_HAS_64BIT_REGS): Add mips64r6.
189 (ISA_HAS_DROR): Likewise.
190 (ISA_HAS_64BIT_FPRS): Add mips32r6 and mips64r6.
191 (ISA_HAS_ROR): Likewise.
192 (ISA_HAS_ODD_SINGLE_FPR): Likewise.
193 (ISA_HAS_MXHC1): Likewise.
194 (hilo_interlocks): Likewise.
195 (md_longopts): Likewise.
196 (ISA_HAS_LEGACY_NAN): New define.
197 (options): Add OPTION_MIPS32R6 and OPTION_MIPS64R6.
198 (mips_ase): Add field rem_rev.
199 (mips_ases): Updated to add which ISA an ASE was removed in.
200 (mips_isa_rev): Add support for mips32r6 and mips64r6.
201 (mips_check_isa_supports_ase): Add support to check if an ASE
202 has been removed in the specified MIPS ISA revision.
203 (validate_mips_insn): Skip '-' character.
204 (macro_build): Likewise.
205 (mips_check_options): Prevent R6 working with fp32, mips16,
206 micromips, or branch relaxation.
207 (file_mips_check_options): Set R6 floating point registers to
208 64 bit. Also deal with the nan2008 option.
209 (limited_pcrel_reloc_p): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
210 BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
211 BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
212 BFD_RELOC_LO16_PCREL.
213 (operand_reg_mask): Add support for OP_SAME_RS_RT, OP_CHECK_PREV
215 (match_check_prev_operand): New static function.
216 (match_same_rs_rt_operand): New static function.
217 (match_non_zero_reg_operand): New static function.
218 (match_operand): Added entries for: OP_SAME_RS_RT, OP_CHECK_PREV
220 (insns_between): Added case to deal with forbidden slots.
221 (append_insn): Added support for relocs: BFD_RELOC_MIPS_21_PCREL_S2
222 and BFD_RELOC_MIPS_26_PCREL_S2.
223 (match_insn): Add support for operands -A, -B, +' and +". Also
225 (mips_percent_op): Add entries for %pcrel_hi and %pcrel_lo.
226 (md_parse_option): Add support for mips32r6 and mips64r6. Also
227 update the nan option handling.
228 (md_pcrel_from): Add cases for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
229 BFD_RELOC_MIPS_26_PCREL_S2.
230 (mips_force_relocation): Prevent forced relaxation for MIPS r6.
231 (md_apply_fix): Add support for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
232 BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
233 BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
234 BFD_RELOC_LO16_PCREL.
235 (s_mipsset): Add support for mips32r6 and mips64r6.
236 (s_nan): Update to support the new nan2008 framework.
237 (tc_gen_reloc): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
238 BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
239 BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
240 BFD_RELOC_LO16_PCREL.
241 (mips_elf_final_processing): Updated to use the mips_nan2008.
242 (mips_cpu_info_table): Add entries for mips32r6 and mips64r6.
243 (macro): Enable ldc2, sdc2, ll, lld, swc2, sc, scd, cache, pref
245 (mips_fix_adjustable): Make PC relative R6 relocations relative
246 to the symbol and not the section.
247 * configure.ac: Add support for mips32r6 and mips64r6.
248 * configure: Regenerate.
249 * doc/c-mips.texi: Document the -mips32r6 and -mips64r6 command line
251 * doc/as.texinfo: Likewise.
253 2014-09-15 Matthew Fortune <matthew.fortune@imgtec.com>
255 * tc-mips.c (check_fpabi): Move softfloat and singlefloat
258 2014-09-12 Jose E. Marchesi <jose.marchesi@oracle.com>
260 * config/tc-sparc.c (sparc_ip): Update the set of allowed hwcaps
261 when bumping the current architecture.
262 (md_begin): Adjust the highetst architecture level also when a
263 specific architecture is not requested.
265 2014-09-12 Andrew Bennett <andrew.bennett@imgtec.com>
267 * configure.tgt: Add mips*-img-elf* target triple.
269 2014-09-12 Alan Modra <amodra@gmail.com>
271 * config/tc-i386.c (match_template): Remove redundant "!!" testing
272 single-bit bitfields.
273 (build_modrm_byte): Don't compare single-bit bitfields to "1".
275 2014-09-09 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
277 * config/tc-arm.c (arm_cpus): Add cortex-a17.
279 2014-09-03 Jiong Wang <jiong.wang@arm.com>
281 * config/tc-aarch64.c (parse_sys_reg): Remove the restriction on op0
284 2014-09-03 Jiong Wang <jiong.wang@arm.com>
286 * config/tc-aarch64.c (parse_operands): Recognize PAIRREG.
287 (aarch64_features): Add entry for lse extension.
289 2014-08-26 Jiong Wang <jiong.wang@arm.com>
291 * config/tc-arm.c (aeabi_set_public_attributes): Update selected_cpu
292 based on the info we got during parsing.
293 (arm_handle_align): Make sure the p2align expanding logic under thumb
296 2014-08-26 Maciej W. Rozycki <macro@codesourcery.com>
298 * config/tc-mips.c (macro) <M_SAA_AB>: Remove duplicate code and
300 <M_SAAD_AB>: ... here. Assert that !microMIPS.
302 2014-08-26 Jan-Benedict Glaw <jbglaw@lug-owl.de>
304 * config/tc-moxie.h (md_convert_frag): Silence warning.
306 2014-08-22 Richard Henderson <rth@redhat.com>
308 * config/tc-aarch64.c (tc_aarch64_regname_to_dw2regnum): Fix
309 register number for vector register types.
310 * config/tc-aarch64.h (DWARF2_LINE_MIN_INSN_LENGTH): Set to 4.
311 (DWARF2_CIE_DATA_ALIGNMENT): Set to -8.
313 2014-08-22 Maciej W. Rozycki <macro@codesourcery.com>
315 * config/tc-ppc.c (md_assemble): Only set the PPC_APUINFO_VLE
316 flag if both the processor and opcode flags match.
318 2014-08-22 Maciej W. Rozycki <macro@codesourcery.com>
320 * config/tc-arm.c (add_to_lit_pool): Preinitialize `imm1'.
322 2014-08-20 Maciej W. Rozycki <macro@codesourcery.com>
324 * dw2gencfi.c (make_debug_seg): Replace leading spaces with tabs.
325 (dot_cfi_val_encoded_addr, output_cfi_insn): Likewise.
326 (output_cie, cfi_change_reg_numbers, cfi_finish): Likewise.
328 2014-08-20 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
330 * config/tc-arm.c (parse_ifimm_zero): New function.
331 (enum operand_parse_code): Add OP_RSVD_FI0 value.
332 (parse_operands): Handle OP_RSVD_FI0.
333 (asm_opcode_insns): Use RSVD_FI0 for second operand of vcmp, vcmpe.
335 2014-08-20 Alan Modra <amodra@gmail.com>
337 * Makefile.am: Typo fix.
338 * Makefile.in: Regenerate.
339 * po/POTFILES.in: Regenerate.
341 2014-08-19 Andreas Tobler <andreast@fgznet.ch>
343 * Makefile.am: Add FreeBSD ARM support.
344 * Mafefile.in: Regenerate.
345 * configure.tgt: Add FreeBSD ARM support.
346 * config/te-armfbsdeabi.h: New file.
347 * config/te-armfbsdvfp.h: Likewise.
349 2014-08-19 Alan Modra <amodra@gmail.com>
351 * configure: Regenerate.
353 2014-08-18 Nick Clifton <nickc@redhat.com>
355 * config/tc-rl78.c (md_apply_fix): Correct handling of small sized
356 RELOC_RL78_DIFF fixups.
358 2014-08-18 Alan Modra <amodra@gmail.com>
360 * read.c (parse_mri_cons): Warning fix.
362 2014-08-14 Alan Modra <amodra@gmail.com>
364 * configure.ac: Move ACX_LARGEFILE after LT_INIT.
365 * config.in: Regenerate.
366 * configure: Regenerate.
368 2014-08-06 Ilya Tocar <ilya.tocar@intel.com>
370 * config/tc-i386.c (omit_lock_prefix): New.
371 (output_insn): Omit lock prefix if omit_lock_prefix is true.
372 (OPTION_omit_lock_prefix): New.
373 (md_longopts): Add momit-lock-prefix.
374 (md_parse_option): Handle momit-lock-prefix.
375 (md_show_usage): Add momit-lock-prefix=[no|yes].
376 * doc/c-i386.texi (momit-lock-prefix): Document.
378 2014-08-01 Takashi Yoshii <yoshii.takashi@renesas.com>
381 * config/tc-sh.c (tc_gen_reloc): Fix initialization of addend in
384 2014-07-29 Matthew Fortune <matthew.fortune@imgtec.com>
386 * config/tc-mips.c: Rename INSN_LOAD_COPROC_DELAY to INSN_LOAD_COPROC
387 and INSN_COPROC_MOVE_DELAY to INSN_COPROC_MOVE throughout.
389 2014-07-29 Matthew Fortune <matthew.fortune@imgtec.com>
391 * config/tc-mips.c (mips_flags_frag): New static global.
392 (struct mips_set_options): Add oddspreg field.
393 (file_mips_opts, mips_opts): Initialize oddspreg.
394 (ISA_HAS_ODD_SINGLE_FPR): Add CPU argument and update for R5900 and
396 (enum options, md_longopts, md_parse_option): Add -mfpxx, -modd-spreg
397 and -mno-odd-spreg options.
398 (md_begin): Create .MIPS.abiflags section.
399 (fpabi_incompatible_with, fpabi_requires): New static function.
400 (check_fpabi): Likewise.
401 (mips_check_options): Handle fp=xx and oddspreg restrictions.
402 (file_mips_check_options): Set oddspreg by default for fp=xx.
403 (mips_oddfpreg_ok): Re-write function.
404 (check_regno): Check odd numbered registers regardless of FPR size.
405 For fp != 32 use as_bad instead of as_warn.
406 (match_float_constant): Rewrite check regarding FP register width. Add
407 support for generating constants when MXHC1 is present. Handle fp=xx
408 to comply with the ABI.
409 (macro): Update M_LI_DD similarly to match_float_constant. Generate
410 MTHC1 when available. Check that correct code can be generated for
411 fp=xx and fp=64 ABIs.
412 (parse_code_option, s_mipsset): Add fp=xx, oddspreg and nooddspreg
414 (mips_convert_ase_flags): New static function.
415 (mips_elf_final_processing): Use fpabi == Val_GNU_MIPS_ABI_FP_OLD_64
416 to determine when to add the EF_MIPS_FP64 flag. Populate the
417 .MIPS.abiflags section.
418 (md_mips_end): Update .gnu_attribute based on command line and .module
419 as applicable. Use check_fpabi to ensure .gnu.attribute and command
420 line/.module options are consistent.
421 * doc/as.texinfo: Add missing -mgp64/-mfp64 options and document new
422 -mfpxx, -modd-spreg and -mno-odd-spreg options.
423 * doc/c-mips.texi: Document -mfpxx, -modd-spreg, -mno-odd-spreg,
424 gnu_attribute values and FP ABIs.
426 2014-07-27 Joel Sherrill <joel.sherrill@oarcorp.com>
428 Add RTEMS target support and simplify matching
430 * gas/configure.tgt (or1k*-*-rtems*): Ensure a match.
431 (or1k*-*-*): Use or1k* to match or1knd and or1kZ.
433 2014-07-27 Anthony Green <green@moxielogic.com>
435 * configure.tgt (generic_target): Add moxie-*-moxiebox*
436 * config/tc-moxie.c: Remove moxie_target_format.
437 (md_begin): Set default target_big_endian.
438 * config/tc-moxie.h: Only set TARGET_BYTES_BIG_ENDIAN if unset.
439 (TARGET_FORMAT): Set based on target_big_endian.
441 2014-07-26 Alan Modra <amodra@gmail.com>
443 * config/bfin-parse.y: Don't include obstack.h.
444 * config/obj-aout.c: Likewise.
445 * config/obj-coff.c: Likewise.
446 * config/obj-som.c: Likewise.
447 * config/tc-bfin.c: Likewise.
448 * config/tc-i960.c: Likewise.
449 * config/tc-rl78.c: Likewise.
450 * config/tc-rx.c: Likewise.
451 * config/tc-tic4x.c: Likewise.
453 * listing.c: Likewise.
454 * config/obj-elf.c (elf_file_symbol): Make name_length a size_t.
455 * config/tc-aarch64.c (symbol_locate): Likewise.
456 * config/tc-arm.c (symbol_locate): Likewise.
457 * config/tc-mmix.c (mmix_handle_mmixal): Make len_0 a size_t.
458 * config/tc-score.c (s3_build_score_ops_hsh): Make len a size_t.
459 (s3_build_dependency_insn_hsh): Likewise.
460 * config/tc-score7.c (s7_build_score_ops_hsh): Likewise.
461 (s7_build_dependency_insn_hsh): Likewise.
462 * frags.c (frag_grow): Make parameter a size_t, and use size_t locals.
463 (frag_new): Make parameter a size_t.
464 (frag_var_init): Make max_chars and var parameters size_t.
465 (frag_var, frag_variant): Likewise.
466 (frag_room): Return a size_t.
467 (frag_align_pattern): Make n_fill parameter a size_t.
468 * frags.h: Update function prototypes.
469 * symbols.c (save_symbol_name): Make name_length a size_t.
471 2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com>
472 Alexander Ivchenko <alexander.ivchenko@intel.com>
473 Maxim Kuznetsov <maxim.kuznetsov@intel.com>
474 Sergey Lega <sergey.s.lega@intel.com>
475 Anna Tikhonova <anna.tikhonova@intel.com>
476 Ilya Tocar <ilya.tocar@intel.com>
477 Andrey Turetskiy <andrey.turetskiy@intel.com>
478 Ilya Verbin <ilya.verbin@intel.com>
479 Kirill Yukhin <kirill.yukhin@intel.com>
480 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
482 * config/tc-i386.c (cpu_arch): Add .avx512dq, CPU_AVX512DQ_FLAGS.
483 * doc/c-i386.texi: Document avx512dq/.avx512dq.
485 2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com>
486 Alexander Ivchenko <alexander.ivchenko@intel.com>
487 Maxim Kuznetsov <maxim.kuznetsov@intel.com>
488 Sergey Lega <sergey.s.lega@intel.com>
489 Anna Tikhonova <anna.tikhonova@intel.com>
490 Ilya Tocar <ilya.tocar@intel.com>
491 Andrey Turetskiy <andrey.turetskiy@intel.com>
492 Ilya Verbin <ilya.verbin@intel.com>
493 Kirill Yukhin <kirill.yukhin@intel.com>
494 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
496 * config/tc-i386.c (cpu_arch): Add .avx512bw, CPU_AVX512BW_FLAGS.
497 * doc/c-i386.texi: Document avx512bw/.avx512bw.
499 2014-07-22 Sergey Guriev <sergey.s.guriev@intel.com>
500 Alexander Ivchenko <alexander.ivchenko@intel.com>
501 Maxim Kuznetsov <maxim.kuznetsov@intel.com>
502 Sergey Lega <sergey.s.lega@intel.com>
503 Anna Tikhonova <anna.tikhonova@intel.com>
504 Ilya Tocar <ilya.tocar@intel.com>
505 Andrey Turetskiy <andrey.turetskiy@intel.com>
506 Ilya Verbin <ilya.verbin@intel.com>
507 Kirill Yukhin <kirill.yukhin@intel.com>
508 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
510 * config/tc-i386.c (cpu_arch): Add .avx512vl, CPU_AVX512VL_FLAGS.
511 (build_vex_prefix): Don't abort on VEX.W.
512 (check_VecOperands): Support BROADCAST_1TO4 and BROADCAST_1TO2.
513 (check_VecOperations): Ditto.
514 * doc/c-i386.texi: Document avx512vl/.avx512vl.
516 2014-07-21 Joel Sherrill <joel.sherrill@oarcorp.com>
518 Add or reactivate or1k-*-rtems*
519 * gas/configure.tgt (or1k-*-rtems*): Add.
521 2014-07-17 Ilya Tocar <ilya.tocar@intel.com>
523 * config/tc-i386.c (parse_register): Set need_vrex.
525 2014-07-15 Jiong Wang <jiong.wang@arm.com>
527 * config/tc-arm.c (add_to_lit_pool): Use "inst.operands[1].imm" for
528 sign extension. Casting the type of imm1 and imm2 to offsetT. Fix
529 one logic error when checking X_op.
531 2014-07-14 Andreas Schwab <schwab@linux-m68k.org>
533 * config/tc-m68k.c (md_convert_frag_1): Don't complain with
534 --pcrel about TAB (DBCCLBR, LONG) conversion.
536 2014-07-12 David Majnemer <david.majnemer@gmail.com>
538 * read.c (assign_symbol): Don't force "set" symbols local for PE.
540 2014-07-08 Jiong Wang <jiong.wang@arm.com>
542 * config/tc-arm.c (literal_pool): New field "alignment".
543 (find_or_make_literal_pool): Initialize "alignment" to 2.
544 (s_ltorg): Align the pool using value of "alignment"
545 (parse_big_immediate): New parameter "in_exp". Return
546 parsed expression if "in_exp" is not null.
547 (parse_address_main): Invoke "parse_big_immediate" for
549 (add_to_lit_pool): Add one parameter 'nbytes'.
550 Split 8 byte entry into two 4 byte entry.
551 Add padding to align 8 byte entry to 8 byte boundary.
552 (encode_arm_cp_address): Generate literal pool entry if possible.
553 (move_or_literal_pool): Generate entry for vldr case.
554 (enum lit_type): New enum type.
555 (do_ldst): Use new enum type.
556 (do_ldstv4): Likewise.
557 (do_t_ldst): Likewise.
558 (neon_write_immbits): Support Thumb-2 mode.
560 2014-07-07 Barney Stratford <barney_stratford@fastmail.fm>
562 * config/tc-avr.c (avr_operand): Permit referring to r26-r31 by
563 name as [xyz][hl]. Permit using a symbol whoes name begins with
564 ‘r’ to refer to a register.
565 Allow arbitrary expressions for the P and p operators.
566 (md_apply_fix): Check the BFD_RELOC_AVR_PORT5 and
567 BFD_RELOC_AVR_PORT6 relocations.
569 2014-07-04 Alan Modra <amodra@gmail.com>
571 * doc/internals.texi: Update "configure.in" comments.
572 * acinclude.m4: Likewise.
573 * config/tc-sparc.c: Likewise.
575 2014-07-04 Alan Modra <amodra@gmail.com>
577 * configure.ac: Rename from configure.in.
578 * Makefile.in: Regenerate.
579 * config.in: Regenerate.
580 * doc/Makefile.in: Regenerate.
582 2014-07-04 Alan Modra <amodra@gmail.com>
584 * doc/Makefile.am (CONFIG_STATUS_DEPENDENCIES): Delete.
585 * doc/Makefile.in: Regenerate.
587 2014-07-04 Alan Modra <amodra@gmail.com>
589 * configure.in: Include bfd/version.m4.
590 (AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
591 (BFD_VERSION): Delete.
592 * configure.com: Get bfd version from bfd/version.m4.
593 * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
594 * configure: Regenerate.
595 * Makefile.in: Regenerate.
596 * doc/Makefile.in: Regenerate.
598 2014-07-01 Barney Stratford <barney_stratford@fastmail.fm>
599 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
600 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
601 Soundararajan <Sounderarajan.D@atmel.com>
603 * config/tc-avr.c (mcu_types): Add avrtiny arch.
604 Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
606 (md_show_usage): Add avrtiny arch in usage message.
607 (avr_operand): validate and issue error for invalid register for
609 add new reloc exp for 16 bit lds/sts instruction.
610 (md_apply_fix): check 16 bit lds/sts operand for out of range and
612 (md_assemble): check ISA for arch and issue diagnostic.
613 * NEWS: Mention new support.
614 * doc/c-avr.texi: Document support for avrtiny architecture.
616 2014-06-27 Alan Modra <amodra@gmail.com>
618 * config/obj-macho.c (obj_mach_o_set_symbol_qualifier): Don't set
619 SYM_MACHO_FIELDS_NOT_VALIDATED after reporting an error.
620 (obj_mach_o_frob_label): Avoid cascading errors.
621 (obj_mach_o_frob_symbol): Don't set SYM_MACHO_FIELDS_NOT_VALIDATED.
623 2014-06-18 DJ Delorie <dj@redhat.com>
625 * config/rx-parse.y (BSET, BCLR, BTST, BNOT, BMCMD): Make .B
628 2014-06-17 Hans-Peter Nilsson <hp@bitrange.com>
630 * config/tc-mmix.c (loc_assert_s): New member frag.
632 (mmix_md_end): If an error is reported for a LOC expression, patch
635 2014-06-17 Chris Metcalf <cmetcalf@tilera.com>
638 * macro.c (buffer_and_nest): Honour #line directives inside
641 2014-06-17 Jiong Wang <jiong.wang@arm.com>
643 * config/tc-arm.c (depr_it_insns): New check for inc/dec sp.
645 2014-06-17 Hans-Peter Nilsson <hp@axis.com>
647 * config/tc-cris.c (cris_bad): New function.
648 (cris_process_instruction): Where applicable, use it instead of
651 2014-06-16 Nick Clifton <nickc@redhat.com>
653 * config/tc-aarch64.c (md_apply_fix): Ignore unused relocs.
655 2014-06-16 Jiong Wang <jiong.wang@arm.com>
657 * config/tc-aarch64.c (END_OF_INSN): New macro.
658 (parse_operands): Handle operand given and in wrong format when
661 2014-06-16 Alan Modra <amodra@gmail.com>
663 * write.h (subsegs_finish): Delete declaration.
664 * write.c (subsegs_finish): Make static.
665 (write_object_file): Call subsegs_finish from here. Don't print
666 warning and error count here..
667 * as.c (main): ..do so here instead. Remove dead code for "no
668 object file generated". Split out count strings to better support
669 internationalisation. Don't call subsegs_finish. Tidy setting of
670 "keep_it". Run write_object_file even after errors.
671 (keep_it): Make static.
672 * config/obj-elf.c (elf_frob_symbol): Remove assert.
673 (elf_frob_file_before_adjust): Likewise.
675 2014-06-16 Alan Modra <amodra@gmail.com>
677 * config/tc-dlx.c (machine_ip): Move initialisation of the_insn
680 2014-06-16 Alan Modra <amodra@gmail.com>
682 * config/tc-i386.c (reloc): Don't avoid pcrel check for
683 BFD_RELOC_SIZE64. Return NO_RELOC on failing pcrel check.
685 2014-06-16 Alan Modra <amodra@gmail.com>
687 * config/tc-tic6x.c (s_tic6x_ehtype): Clear after frag_more.
688 (tic6x_output_exidx_entry): Likewise.
689 (md_apply_fix): Simplify 1 byte md_number_to_chars.
691 2014-06-16 Alan Modra <amodra@gmail.com>
693 * config/tc-tic54x.c (tic54x_mlib): Don't write garbage past
694 end of archive to temp file.
695 (tic54x_start_line_hook): Start scan for parallel on next line,
696 not one char into next line (which may overrun the buffer).
698 2014-06-16 Alan Modra <amodra@gmail.com>
700 * config/tc-vax.c (md_apply_fix): Rewrite.
701 (tc_gen_reloc, vax_cons, vax_cons_fix_new): Style: Use NO_RELOC
702 define rather than the equivalent BFD_RELOC_NONE.
704 2014-06-16 Alan Modra <amodra@gmail.com>
706 * config/tc-arm.c (s_arm_elf_cons): Initialise after frag_more.
707 (md_apply_fix): Delete now unnecessary zeroing for BFD_RELOC_ARM_GOT*
708 and BFD_RELOC_ARM_TLS* relocs. Simplify BFD_RELOC_8 case.
710 2014-06-16 Alan Modra <amodra@gmail.com>
712 * config/tc-cris.c (md_create_long_jump): Follow "short" jump
713 with a nop rather than leaving uninitialised.
715 2014-06-13 Chen Gang <gang.chen.5i5j@gmail.com>
717 * config/tc-score7.c: Replace sprintf with strcpy where
719 (s7_b32_relax_to_b16): Use symbol_get_frag() to access a symbol's
721 * config/tc-score.c (s3_relax_branch_inst16): Likewise.
722 (s3_relax_cmpbranch_inst32): Likewise.
724 2014-06-07 Alan Modra <amodra@gmail.com>
726 * config/tc-ppc.c (ppc_insert_operand): Handle PPC_OPERAND_SIGNOPT
727 on unsigned fields. Comment on PPC_OPERAND_SIGNOPT signed fields
730 2014-06-02 Martin Storsjo <martin@martin.st>
732 * doc/c-aarch64.texi: Fix the documentation on :pg_hi21:.
734 2014-06-05 Joel Brobecker <brobecker@adacore.com>
736 * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
737 bfd's development.sh.
738 * Makefile.in, configure: Regenerate.
740 2014-06-03 Nick Clifton <nickc@redhat.com>
742 * config/tc-msp430.c (OPTION_WARN_INTR_NOPS): Use y instead of z.
743 (OPTION_NO_WARN_INTR_NOPS): Use Y instead of Z.
744 * doc/c-msp430.texi: Update command line option description.
746 2014-05-22 Alan Modra <amodra@gmail.com>
748 * listing.c (listing_warning, listing_error): Add space after colon.
749 * messages.c (as_warn_internal, as_bad_internal): Use the same
752 2014-05-20 Matthew Fortune <matthew.fortune@imgtec.com>
754 * config/tc-mips.c (file_mips_opts_checked): New static global.
755 (s_module): New static function.
757 (mips_pseudo_table): Add .module handler.
758 (mips_set_ase): Add opts argument and use instead of mips_opts.
759 (md_assemble): Use file_mips_check_options.
760 (md_parse_option): Update to use file_mips_opts instead of mips_opts.
761 (mips_set_architecture): Delete function. Moved to...
762 (mips_after_parse_args): Here. All logic now applies to
763 file_mips_opts first and then copies the final state to mips_opts.
764 Move error checking and defaults inference to mips_check_options and
765 file_mips_check_options.
766 (mips_check_options): New static function. Common option checking for
767 command line, .module and .set. Use .module values in error messages
768 instead of refering to command line options.
769 (file_mips_check_options): New static function. A wrapper for
770 mips_check_options with file_mips_opts. Updates BFD arch based on
772 (s_mipsset): Split into s_mipsset and parse_code_option. Settings
773 supported by both .set and .module are moved to parse_code_option.
774 Warnings and errors are kept in s_mipsset because when
775 parse_code_option is used with s_module the warnings are deferred
776 until code is generated. Any setting supporting 'default' value is
777 kept in s_mipsset as it is not applicable to s_module. Inferred
778 settings are also kept in s_mipsset as s_module does not infer any
779 settings. Use mips_check_options.
780 (parse_code_option): New static function derived from s_mipsset.
781 (s_module): New static function that implements .module. Allows file
782 level settings to be changed until code is generated.
783 (s_cpload, s_cpsetup, s_cplocal): Use file_mips_check_options.
784 (s_cprestore, s_cpreturn, s_cpadd, mips_address_bytes): Likewise.
785 (mips_elf_final_processing): Update file_ase to file_mips_opts.ase.
786 (md_mips_end): Use file_mips_check_options.
787 * doc/c-mips.texi: Document .module.
789 2014-05-20 Matthew Fortune <matthew.fortune@imgtec.com>
791 * messages.c (as_warn_internal): Remove extra whitespace from
794 2014-05-20 Matthew Fortune <matthew.fortune@imgtec.com>
796 * config/tc-mips.c (FP64_ASES): Add ASE_MSA.
797 (mips_after_parse_args): Do not select ASE_MSA without -mfp64.
799 2014-05-20 Mike Stump <mikestump@comcast.net>
801 * messages.c (as_warn_internal): Ensure we don't interleave output
802 within a single line when make -j is used.
803 (as_bad_internal): Likewise.
805 2014-05-20 Richard Sandiford <rdsandiford@googlemail.com>
807 * config/obj-elf.h (obj_elf_seen_attribute): Declare.
808 * config/obj-elf.c (recorded_attribute_info): New structure.
809 (recorded_attributes): New variable.
810 (record_attribute, obj_elf_seen_attribute): New functions.
811 (obj_elf_vendor_attribute): Record which attributes have been seen.
813 2014-05-20 Nick Clifton <nickc@redhat.com>
815 * config/tc-msp430.c (CHECK_RELOC_MSP430): Add OP parameter.
816 Generate BFD_RELOC_MSP430_ABS_HI16 if vshift is 1.
817 (msp430_srcoperand): Store vshift value in operand.
819 2014-05-19 Nick Clifton <nickc@redhat.com>
822 * config/tc-i386.c (md_apply_fix): Improve the detection of code
823 symbols for 32-bit PE targets.
825 2014-05-18 Richard Sandiford <rdsandiford@googlemail.com>
827 * config/tc-mips.c (md_obj_begin): Delete.
828 (md_obj_end): Fold into...
829 (md_mips_end): ...here. Move to end of file.
831 2014-05-17 Nick Clifton <nickc@redhat.com>
834 * config/tc-v850.c (handle_ctoff): Generate an error if called
835 when using the RH850 ABI.
837 2014-05-16 Kaushik Phata <Kaushik.Phatak@kpit.com>
839 * config/tc-rl78.c (enum options): Add OPTION_32BIT_DOUBLES
840 and OPTION_64BIT_DOUBLES.
841 (md_longopts): Add -m32bit-doubles and -m64bit-doubles.
842 (md_parse_option): Parse -m32bit-doubles and -m64bit-doubles.
843 (md_show_usage): Show all of the RL78 options.
844 (rl78_float_cons): New static functions.
845 (md_pseudo_table): Update handler for "double".
846 * doc/c-rl78.texi: Document new options.
847 * doc/as.texinfo: Likewise.
849 2014-05-13 Matthew Fortune <matthew.fortune@imgtec.com>
851 * config/tc-mips.c (mips_set_options): Rename gp32 to gp throughout.
852 (HAVE_32BIT_GPRS, HAVE_64BIT_GPRS): Remove. Re-implement via GPR_SIZE.
853 (HAVE_32BIT_FPRS, HAVE_64BIT_FPRS): Remove. Re-implement via FPR_SIZE.
854 (GPR_SIZE, FPR_SIZE): New macros. Use throughout.
856 2014-05-08 Matthew Fortune <matthew.fortune@imgtec.com>
858 * config/tc-mips.c (md_parse_option): Update missed file_mips_isa
861 2014-05-08 Matthew Fortune <matthew.fortune@imgtec.com>
863 * config/tc-mips.c (mips_set_options): Rename fp32 field to fp.
864 Update fp32 == 0 to fp == 64 and fp32 == 1 to fp != 64 throughout.
865 (file_mips_gp32, file_mips_fp32, file_mips_soft_float,
866 file_mips_single_float, file_mips_isa, file_mips_arch): Merge into
868 (file_mips_opts): Here. New static global. Update throughout.
869 (mips_opts): Update defaults for gp32 and fp.
871 2014-05-08 Matthew Fortune <matthew.fortune@imgtec.com>
873 * config/tc-mips.c (streq): Define.
874 (mips_convert_symbolic_attribute): New function.
875 * config/tc-mips.h (CONVERT_SYMBOLIC_ATTRIBUTE): Define.
876 (mips_convert_symbolic_attribute): New prototype.
878 2014-05-02 Max Filippov <jcmvbkbc@gmail.com>
880 * config/tc-xtensa.c (md_apply_fix): mark BFD_RELOC_XTENSA_DIFF*
883 2014-05-07 Andrew Bennett <andrew.bennett@imgtec.com>
885 * tc-mips.c (ISA_SUPPORTS_MIPS16E): Add mips32r3, mips32r5, mips64r3
887 (ISA_HAS_64BIT_FPRS): Likewise.
888 (ISA_HAS_ROR): Likewise.
889 (ISA_HAS_ODD_SINGLE_FPR): Likewise.
890 (ISA_HAS_MXHC1): Likewise.
891 (hilo_interlocks): Likewise.
892 (md_longopts): Likewise.
893 (ISA_HAS_64BIT_REGS): Add mips64r3 and mips64r5.
894 (ISA_HAS_DROR): Likewise.
895 (options): Add OPTION_MIPS32R3, OPTION_MIPS32R5, OPTION_MIPS64R3, and
897 (mips_isa_rev): Add support for mips32r3, mips32r5, mips64r3 and
899 (md_parse_option): Likewise.
900 (s_mipsset): Likewise.
901 (mips_cpu_info_table): Add entries for mips32r3, mips32r5, mips64r3
902 and mips64r5. Also change p5600 entry to be mips32r5.
903 * configure.in: Add support for mips32r3, mips32r5, mips64r3 and
905 * configure: Regenerate.
906 * doc/c-mips.texi: Document the -mips32r3, -mips32r5, -mips64r3 and
907 -mips64r5 command line options.
908 * doc/as.texinfo: Likewise.
910 2014-04-28 Nick Clifton <nickc@redhat.com>
913 * config/tc-i386.c (md_apply_fix): Do not adjust value of
914 pc-relative fixes against weak symbols.
916 2014-04-26 Alan Modra <amodra@gmail.com>
918 * po/POTFILES.in: Regenerate.
920 2014-04-24 Nick Clifton <nickc@redhat.com>
922 * config/tc-arm.c (s_ltorg): Only create a mapping symbol for ELF
925 2014-04-23 Will Newton <will.newton@linaro.org>
927 * config/tc-arm.c (s_ltorg): Call make_mapping_symbol
928 directly instead of mapping_state.
930 2014-04-23 Andrew Bennett <andrew.bennett@imgtec.com>
932 * config/tc-mips.c (options): Add OPTION_XPA and OPTION_NO_XPA.
933 (md_longopts): Add xpa and no-xpa command line options.
934 (mips_ases): Add MIPS XPA ASE.
935 (mips_cpu_info_table): Update p5600 entry to allow the XPA ASE.
936 * doc/as.texinfo: Document the MIPS XPA command line options.
937 * doc/c-mips.texi: Document the MIPS XPA command line options,
938 and assembler directives.
940 2014-04-22 Sandra Loosemore <sandra@codesourcery.com>
942 * config/tc-nios2.c (nios2_consume_arg): Add case for 'E' to
943 unbreak self-test mode.
945 2014-04-22 Max Filippov <jcmvbkbc@gmail.com>
947 * config/tc-xtensa.c (xtensa_handle_align): record alignment for the
950 2014-04-22 Christian Svensson <blue@cmd.nu>
952 * Makefile.am: Remove openrisc and or32 support. Add support for or1k.
953 * configure.in: Likewise.
954 * configure.tgt: Likewise.
955 * doc/as.texinfo: Likewise.
956 * config/obj-coff.h: Likewise.
957 * config/tc-or1k.c: New file.
958 * config/tc-or1k.h: New file.
959 * config/tc-openrisc.c: Delete.
960 * config/tc-openrisc.h: Delete.
961 * config/tc-or32.c: Delete.
962 * config/tc-or32.h: Delete.
963 * Makefile.in: Regenerate.
964 * configure: Regenerate.
966 2014-04-16 Alan Modra <amodra@gmail.com>
968 * config/tc-tilegx.h (TC_CONS_FIX_NEW): Add RELOC arg.
969 * config/tc-tilepro.h (TC_CONS_FIX_NEW): Likewise.
971 2014-04-10 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
973 * config/tc-avr.c: Add new flag mlink-relax.
974 (md_show_usage): Add flag and help text.
975 (md_parse_option): Record whether link relax is turned on.
976 (relaxable_section): New.
977 (avr_validate_fix_sub): New.
978 (avr_force_relocation): New.
979 (md_apply_fix): Generate DIFF reloc.
980 (avr_allow_local_subtract): New.
982 * config/tc-avr.h (TC_LINKRELAX_FIXUP): Define to 0.
983 (TC_FORCE_RELOCATION): Define.
984 (TC_FORCE_RELOCATION_SUB_SAME): Define.
985 (TC_VALIDATE_FIX_SUB): Define.
986 (avr_force_relocation): Declare.
987 (avr_validate_fix_sub): Declare.
988 (md_allow_local_subtract): Define.
989 (avr_allow_local_subtract): Declare.
991 2014-04-10 Andrew Bennett <andrew.bennett@imgtec.com>
993 * config/tc-mips.c (mips_cpu_info_table): Add P5600
995 * doc/c-mips.texi: Document p5600.
997 2014-04-09 Nick Clifton <nickc@redhat.com>
999 * config/tc-rl78.h (TC_CONS_FIX_NEW): Add RELOC parameter.
1000 * config/tc-z80.h (TC_CONS_FIX_NEW): Discard RELOC parameter.
1001 * config/tc-aarch64.h (TC_CONS_FIX_NEW): Discard RELOC parameter.
1002 * read.c (emit_expr_fix): Mark the r parameter as potentially
1005 2014-04-09 Alan Modra <amodra@gmail.com>
1007 * config/tc-ppc.c (warn_476, last_insn, last_seg, last_subseg):
1009 (md_longopts, md_parse_option, md_show_usage): Add --ppc476-workaround.
1010 (ppc_elf_cons_fix_check): New function.
1011 (md_assemble): Set last_insn, last_seg, last_subseg.
1012 (ppc_byte, md_apply_fix): Handle warn_476.
1013 * config/tc-ppc.h (TC_CONS_FIX_CHECK): Define.
1014 (ppc_elf_cons_fix_check): Declare.
1015 * read.c (cons_worker): Invoke TC_CONS_FIX_CHECK.
1017 2014-04-09 Alan Modra <amodra@gmail.com>
1019 * gas/config/tc-alpha.h (TC_CONS_FIX_NEW): Add RELOC parameter.
1020 * gas/config/tc-arc.c (arc_cons_fix_new): Add reloc parameter.
1021 * gas/config/tc-arc.h (arc_cons_fix_new): Update prototype.
1022 (TC_CONS_FIX_NEW): Add RELOC parameter.
1023 * gas/config/tc-arm.c (cons_fix_new_arm): Similarly
1024 * gas/config/tc-arm.h (cons_fix_new_arm, TC_CONS_FIX_NEW): Similarly.
1025 * gas/config/tc-cr16.c (cr16_cons_fix_new): Similarly.
1026 * gas/config/tc-cr16.h (cr16_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
1027 * gas/config/tc-crx.h (TC_CONS_FIX_NEW): Similarly.
1028 * gas/config/tc-m32c.c (m32c_cons_fix_new): Similarly.
1029 * gas/config/tc-m32c.h (m32c_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
1030 * gas/config/tc-mn10300.c (mn10300_cons_fix_new): Similarly.
1031 * gas/config/tc-mn10300.h (mn10300_cons_fix_new, TC_CONS_FIX_NEW):
1033 * gas/config/tc-ns32k.c (cons_fix_new_ns32k): Similarly.
1034 * gas/config/tc-ns32k.h (cons_fix_new_ns32k): Similarly.
1035 * gas/config/tc-pj.c (pj_cons_fix_new_pj): Similarly.
1036 * gas/config/tc-pj.h (pj_cons_fix_new_pj, TC_CONS_FIX_NEW): Similarly.
1037 * gas/config/tc-rx.c (rx_cons_fix_new): Similarly.
1038 * gas/config/tc-rx.h (rx_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
1039 * gas/config/tc-sh.c (sh_cons_fix_new): Similarly.
1040 * gas/config/tc-sh.h (sh_cons_fix_new, TC_CONS_FIX_NEW): Similarly.
1041 * gas/config/tc-tic54x.c (tic54x_cons_fix_new): Similarly.
1042 * gas/config/tc-tic54x.h (tic54x_cons_fix_new, TC_CONS_FIX_NEW):
1044 * gas/config/tc-tic6x.c (tic6x_cons_fix_new): Similarly.
1045 * gas/config/tc-tic6x.h (tic6x_cons_fix_new, TC_CONS_FIX_NEW):
1047 * gas/config/tc-arc.c (arc_parse_cons_expression): Return reloc.
1048 * gas/config/tc-arc.h (arc_parse_cons_expression): Update proto.
1049 * gas/config/tc-avr.c (exp_mod_data): Make global.
1050 (pexp_mod_data): Delete.
1051 (avr_parse_cons_expression): Return exp_mod_data pointer.
1052 (avr_cons_fix_new): Add exp_mod_data_t pointer param.
1053 (exp_mod_data_t): Move typedef..
1054 * gas/config/tc-avr.h: ..to here.
1055 (exp_mod_data): Declare.
1056 (TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define.
1057 (avr_parse_cons_expression, avr_cons_fix_new): Update prototype.
1058 (TC_CONS_FIX_NEW): Update.
1059 * gas/config/tc-hppa.c (hppa_field_selector): Delete static var.
1060 (cons_fix_new_hppa): Add hppa_field_selector param.
1061 (fix_new_hppa): Adjust.
1062 (parse_cons_expression_hppa): Return field selector.
1063 * gas/config/tc-hppa.h (parse_cons_expression_hppa): Update proto.
1064 (cons_fix_new_hppa): Likewise.
1065 (TC_PARSE_CONS_RETURN_TYPE, TC_PARSE_CONS_RETURN_NONE): Define.
1066 * gas/config/tc-i386.c (got_reloc): Delete static var.
1067 (x86_cons_fix_new): Add reloc param.
1068 (x86_cons): Return got reloc.
1069 * gas/config/tc-i386.h (x86_cons, x86_cons_fix_new): Update proto.
1070 (TC_CONS_FIX_NEW): Add RELOC param.
1071 * gas/config/tc-ia64.c (ia64_cons_fix_new): Add reloc param. Adjust
1073 * gas/config/tc-ia64.h (ia64_cons_fix_new): Update prototype.
1074 (TC_CONS_FIX_NEW): Add reloc param.
1075 * gas/config/tc-microblaze.c (parse_cons_expression_microblaze):
1077 (cons_fix_new_microblaze): Add reloc param.
1078 * gas/config/tc-microblaze.h: Formatting.
1079 (parse_cons_expression_microblaze): Update proto.
1080 (cons_fix_new_microblaze): Likewise.
1081 * gas/config/tc-nios2.c (nios2_tls_ldo_reloc): Delete static var.
1082 (nios2_cons): Return ldo reloc.
1083 (nios2_cons_fix_new): Delete.
1084 * gas/config/tc-nios2.h (nios2_cons): Update prototype.
1085 (nios2_cons_fix_new, TC_CONS_FIX_NEW): Delete.
1086 * gas/config/tc-ppc.c (md_pseudo_table): Remove quad, long, word,
1087 short. Make llong use cons.
1088 (ppc_elf_suffix): Return BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
1089 (ppc_elf_cons): Delete.
1090 (ppc_elf_parse_cons): New function.
1091 (ppc_elf_validate_fix): Don't check for BFD_RELOC_UNUSED.
1092 (md_assemble): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
1093 * gas/config/tc-ppc.h (TC_PARSE_CONS_EXPRESSION): Define
1094 (ppc_elf_parse_cons): Declare.
1095 * gas/config/tc-sparc.c (sparc_cons_special_reloc): Delete static var.
1096 (sparc_cons): Return reloc specifier.
1097 (cons_fix_new_sparc): Add reloc specifier param.
1098 (sparc_cfi_emit_pcrel_expr): Use emit_expr_with_reloc.
1099 * gas/config/tc-sparc.h (TC_PARSE_CONS_RETURN_TYPE): Define.
1100 (TC_PARSE_CONS_RETURN_NONE): Define.
1101 (sparc_cons, cons_fix_new_sparc): Update prototype.
1102 * gas/config/tc-v850.c (hold_cons_reloc): Delete static var.
1103 (v850_reloc_prefix): Use BFD_RELOC_NONE rather than BFD_RELOC_UNUSED.
1104 (md_assemble): Likewise.
1105 (parse_cons_expression_v850): Return reloc.
1106 (cons_fix_new_v850): Add reloc parameter.
1107 * gas/config/tc-v850.h (parse_cons_expression_v850): Update proto.
1108 (cons_fix_new_v850): Likewise.
1109 * gas/config/tc-vax.c (vax_cons_special_reloc): Delete static var.
1110 (vax_cons): Return reloc.
1111 (vax_cons_fix_new): Add reloc parameter.
1112 * gas/config/tc-vax.h (vax_cons, vax_cons_fix_new): Update proto.
1113 * gas/config/tc-xstormy16.c (xstormy16_cons_fix_new): Add reloc param.
1114 * gas/config/tc-xstormy16.h (xstormy16_cons_fix_new): Update proto.
1115 * gas/dwarf2dbg.c (TC_PARSE_CONS_RETURN_NONE): Provide default.
1116 (emit_fixed_inc_line_addr): Adjust exmit_expr_fix calls.
1117 * gas/read.c (TC_PARSE_CONS_EXPRESSION): Return value.
1118 (do_parse_cons_expression): Adjust.
1119 (cons_worker): Pass return value from TC_PARSE_CONS_EXPRESSION
1120 to emit_expr_with_reloc.
1121 (emit_expr_with_reloc): New function handling reloc, mostly
1123 (emit_expr): ..here.
1124 (emit_expr_fix): Add reloc param. Adjust TC_CONS_FIX_NEW invocation.
1126 (parse_mri_cons): Convert to ISO.
1127 * gas/read.h (TC_PARSE_CONS_RETURN_TYPE): Define.
1128 (TC_PARSE_CONS_RETURN_NONE): Define.
1129 (emit_expr_with_reloc): Declare.
1130 (emit_expr_fix): Update prototype.
1131 * gas/write.c (write_object_file): Update TC_CONS_FIX_NEW invocation.
1133 2014-04-03 Ilya Tocar <ilya.tocar@intel.com>
1135 * config/tc-i386.c (cpu_arch): Add .se1.
1136 * doc/c-i386.texi: Document .se1/se1.
1138 2014-04-02 DJ Delorie <dj@redhat.com>
1140 * config/tc-rl78.c (md_apply_fix): Add overflow warnings for
1141 pc-relative branches.
1143 2014-04-02 Nick Clifton <nickc@redhat.com>
1146 * config/tc-arm.c (create_unwind_entry): Report an error if an
1147 attempt to recreate an unwind directive is encountered.
1149 2014-03-27 Nick Clifton <nickc@redhat.com>
1151 * config/tc-score.c (s3_parse_pce_inst): Add "%s" parameter to
1152 sprintf in order to avoid a compile time warning.
1154 2014-03-26 Nick Clifton <nickc@redhat.com>
1156 * config/tc-rl78.c (rl78_op): Issue an error message if a 16-bit
1157 relocation is used on an 8-bit operand or vice versa.
1158 (tc_gen_reloc): Use the RL78_16U relocation for RL78_CODE.
1159 (md_apply_fix): Add support for RL78_HI8, RL78_HI16 and RL78_LO16.
1161 2014-03-25 Nick Clifton <nickc@redhat.com>
1163 * config/obj-coff-seh.c (obj_coff_seh_code): New function -
1164 switches the current segment back to the code segment recorded
1165 when seh_proc was last invoked.
1166 * config/obj-coff-seh.h (SEH_CMDS): Add seh_code.
1168 2014-03-25 Alan Modra <amodra@gmail.com>
1170 * config/tc-ppc.c (ppc_is_toc_sym): Revert 2014-03-05.
1171 (md_assemble): Likewise. Warn.
1173 2014-03-21 David Weatherford <weath@cadence.com>
1174 Max Filippov <jcmvbkbc@gmail.com>
1176 * config/tc-xtensa.c (xtensa_check_frag_count)
1177 xtensa_create_trampoline_frag,
1178 xtensa_maybe_create_trampoline_frag, init_trampoline_frag,
1179 find_trampoline_seg, search_trampolines, get_best_trampoline,
1180 check_and_update_trampolines, add_jump_to_trampoline,
1181 dump_trampolines): New functions.
1182 (md_parse_option): Add cases for --[no-]trampolines options.
1183 (md_assemble, finish_vinsn, xtensa_end): Add call to
1184 xtensa_check_frag_count.
1185 (xg_assemble_vliw_tokens): Add call to
1186 xtensa_maybe_create_trampoline_frag.
1187 (xtensa_relax_frag): Relax fragments with RELAX_TRAMPOLINE state.
1188 (relax_frag_immed): Relax jump instructions that cannot reach its
1190 * config/tc-xtensa.h (xtensa_relax_statesE::RELAX_TRAMPOLINE): New
1192 * doc/as.texinfo: Document --[no-]trampolines command-line options.
1193 * doc/c-xtensa.texi: Document trampolines relaxation and command
1195 * frags.c (get_frag_count, clear_frag_count): New function.
1196 (frag_alloc): Increment totalfrags counter.
1197 * frags.h (get_frag_count, clear_frag_count): New function.
1199 2014-03-20 DJ Delorie <dj@redhat.com>
1201 * config/rl78-defs.h (RL78_RELAX_NONE, RL78_RELAX_BRANCH): Add.
1202 * config/rl78-parse.y (BC, BNC, BZ, BNZ, BH, BHZ, bt_bf): Call
1204 * config/tc-rl78.h (md_relax_frag): Define.
1205 (rl78_relax_frag): Declare.
1206 * config/tc-rl78.c (rl78_relax): Add.
1207 (md_assemble): Set up the variable frags also when relaxing.
1209 (rl78_opcode_type): New.
1210 (rl78_frag_fix_value): New.
1211 (md_estimate_size_before_relax): New-ish.
1212 (rl78_relax_frag): New.
1213 (md_convert_frag): New-ish.
1215 2014-03-20 Richard Sandiford <rdsandiford@googlemail.com>
1217 * config/tc-mips.h (DIFF_EXPR_OK, CFI_DIFF_EXPR_OK): Define.
1218 * config/tc-mips.c (md_pcrel_from): Remove error message.
1219 (md_apply_fix): Convert PC-relative BFD_RELOC_32s to
1220 BFD_RELOC_32_PCREL. Report a specific error message for unhandled
1221 PC-relative expressions. Handle BFD_RELOC_8.
1223 2014-03-19 Jose E. Marchesi <jose.marchesi@oracle.com>
1225 * config/tc-sparc.c (hpriv_reg_table): Added entries for
1226 %hstick_offset and %hstick_enable.
1227 * doc/c-sparc.texi (Sparc-Regs): Document the %hstick_offset and
1228 %hstick_enable hyperprivileged registers.
1230 2014-03-19 Daniel Gutson <daniel.gutson@tallertechnologies.com>
1231 Nick Clifton <nickc@redhat.com>
1233 * config/tc-arm.c (codecomposer_syntax): New flag that states whether the
1234 CCS syntax compatibility mode is on or off.
1235 (asmfunc_states): New enum to represent the asmfunc directive state.
1236 (asmfunc_state): New variable holding the asmfunc directive state.
1237 (comment_chars): Rename to arm_comment_chars.
1238 (line_separator_chars): Rename to arm_line_separator_chars.
1239 (s_ccs_ref): New function that handles the .ref directive.
1240 (asmfunc_debug): New function.
1241 (s_ccs_asmfunc): New function that handles the .asmfunc directive.
1242 (s_ccs_endasmfunc): New function that handles the .endasmfunc directive.
1243 (s_ccs_def): New function that handles the .def directive.
1244 (tc_start_label_without_colon): New function.
1245 (md_pseudo_table): Added new CCS directives.
1246 (arm_ccs_mode): New function that handles the -mccs command line option.
1247 (arm_long_opts): Added new -mccs command line option.
1248 * config/tc-arm.h (LABELS_WITHOUT_COLONS): New macro.
1249 (TC_START_LABEL_WITHOUT_COLON): New macro.
1250 (tc_start_label_without_colon): Added extern function declaration.
1251 (tc_comment_chars): Define.
1252 (tc_line_separator_chars): Define.
1253 * app.c (do_scrub_begin): Use tc_line_separator_chars, if defined.
1254 * read.c (read_begin): Likewise.
1255 * doc/as.texinfo: Add documentation for the -mccs command line
1257 * doc/c-arm.texi: Likewise.
1258 * doc/internals.texi: Document tc_line_separator_chars.
1259 * NEWS: Mention the new feature.
1261 2014-03-18 Jiong Wang <jiong.wang@arm.com>
1263 * config/tc-aarch64.c (aarch64_opts): Add new option
1264 "mno-verbose-error".
1265 (verbose_error_p): Initialize to 1.
1266 * doc/c-aarch64.texi (AArch64 Options): Document -mverbose-error
1267 and -mno-verbose-error.
1269 2014-03-17 Nick Clifton <nickc@redhat.com>
1272 * config/tc-arm.c (tc_arm_regname_to_dw2regnum): Parse VFP
1275 2014-03-13 Richard Earnshaw <rearnsha@arm.com>
1276 Jiong Wang <Jiong.Wang@arm.com>
1278 * doc/c-aarch64.texi: Clean up some formatting issues.
1279 (AArch64 Options): Document -mcpu and -march.
1280 (AArch64 Extensions): New node.
1282 2014-03-13 Tristan Gingold <gingold@adacore.com>
1284 * config/tc-i386.c (use_big_obj): Declare.
1285 (OPTION_MBIG_OBJ): Define.
1286 (md_longopts): Add -mbig-obj option.
1287 (md_parse_option): Handle it.
1288 (md_show_usage): Display help for this option.
1289 (i386_target_format): Use bigobj for x86-64 if -mbig-obj.
1290 * doc/c-i386.texi: Document the option.
1292 2014-03-12 Nick Clifton <nickc@redhat.com>
1295 * config/tc-aarch64.c (literal_expression): New structure.
1296 (literal_pool): Replace exp array with literal_expression array.
1297 (add_to_lit_pool): When adding a bignum cache the big value.
1298 (s_ltorg): When emitting a bignum initialise the global bignum
1299 array from the cached value.
1301 2014-03-12 Alan Modra <amodra@gmail.com>
1303 * Makefile.in: Regenerate.
1304 * config.in: Regenerate.
1305 * doc/Makefile.in: Regenerate.
1307 2014-03-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
1308 Vishnu KS <Vishnu.k_s@atmel.com>
1309 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
1310 Soundararajan <Soundararajan.dhakshinamoorthy@atmel.com>
1312 * gas/tc-avr.c: Add new devices
1313 avr25: ata5272, attiny828
1314 avr35: ata5505, attiny1634
1315 avr4: atmega8a, ata6285, ata6286, atmega48pa
1316 avr5: at90pwm161, ata5790, ata5795, atmega164pa, atmega165pa,
1317 atmega168pa, atmega32a, atmega64rfr2, atmega644rfr2, atmega64a,
1319 avr51: atmega128a, atmega1284
1320 avrxmega2: atxmega16a4u, atxmega16c4, atxmega32a4u, atxmega32c4,
1321 atxmega32e5, atxmega16e5, atxmega8e5
1322 avrxmega4: atxmega64a3u, atxmega64a4u, atxmega64b1, atxmega64b3,
1323 atxmega64c3, atxmega64d4
1324 avrxmega6: atxmega128a3u, atxmega128b3, atxmega128c3,
1325 atxmega128d4, atxmega192a3u, atxmega192c3, atxmega256a3u,
1326 atxmega256c3, atxmega384c3, atxmega384d3
1327 avrxmega7: atxmega128a4u
1328 * doc/c-avr.texi: Ditto.
1330 2014-03-05 Alan Modra <amodra@gmail.com>
1332 Update copyright years.
1334 2014-03-05 Alan Modra <amodra@gmail.com>
1336 * config/tc-ppc.c (ppc_elf_suffix): Support @localentry.
1337 (md_apply_fix): Support R_PPC64_ADDR64_LOCAL.
1339 2014-03-05 Alan Modra <amodra@gmail.com>
1341 * config/tc-ppc.c (md_assemble): Move code adjusting reloc types
1342 later. Merge absolute and relative branch reloc selection.
1343 Generate 16-bit relocs for most 16-bit insn fields given a
1344 non-constant expression.
1346 2014-03-05 Alan Modra <amodra@gmail.com>
1348 * config/tc-ppc.c (ppc_is_toc_sym): Remove OBJ_ELF support.
1349 (md_assemble): Don't call ppc_is_toc_sym for ELF.
1351 2014-03-04 Heiher <r@hev.cc>
1353 * config/tc-mips.c (mips_cpu_info_table): Use ISA_MIPS64R2 for
1356 2014-03-03 Nick Clifton <nickc@redhat.com>
1358 * config/msp430/msp430.c: Replace known mcu array with known
1359 msp430 ISA mcu name array.
1360 Accept any name for -mmcu option.
1361 Add -mz option to warn about missing NOP following an interrupt
1363 (check_for_nop): New.
1364 (msp430_operands): Emit a warning, if requested, when an interrupt
1365 changing instruction is not followed by a NOP.
1366 * doc/c-msp430.c: Document -mz option.
1368 2014-03-03 Alan Modra <amodra@gmail.com>
1370 * config/bfin-lex-wrapper.c: Correct copyright date.
1371 * config/obj-fdpicelf.c: Likewise.
1372 * config/obj-fdpicelf.h: Likewise.
1373 * config/tc-frv.c: Correct copyright punctuation.
1374 * config/tc-ip2k.c: Likewise.
1375 * config/tc-iq2000.c: Likewise.
1376 * config/tc-mep.c: Likewise.
1377 * config/tc-tic4x.c: Likewise.
1378 * config/tc-tic4x.h: Likewise.
1380 2014-03-01 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
1382 * config/tc-avr.c: Remove atxmega16x1.
1384 2014-02-28 Alan Modra <amodra@gmail.com>
1386 * dwarf2dbg.c (out_debug_line): Correct .debug_line header_length
1387 field for 64-bit dwarf.
1389 2014-02-21 Ilya Tocar <ilya.tocar@intel.com>
1391 * config/tc-i386.c (cpu_arch): Add .prefetchwt1.
1392 * doc/c-i386.texi: Document .prefetchwt1/prefetchwt1.
1394 2014-02-12 Ilya Tocar <ilya.tocar@intel.com>
1396 * config/tc-i386.c (cpu_arch): Add .clflushopt, .xsavec, .xsaves.
1397 * doc/c-i386.texi: Document .xsavec/xsavec/.xsaves/xsaves/
1398 clflushopt/.clfushopt.
1400 2014-02-10 Alan Modra <amodra@gmail.com>
1402 * po/POTFILES.in: Regenerate.
1403 * po/gas.pot: Regenerate.
1405 2014-02-03 Sandra Loosemore <sandra@codesourcery.com>
1407 * config/tc-nios2.c (md_apply_fix): Test for new relocs.
1408 (nios2_special_reloc): Add %call_lo, %call_hiadj, %got_lo,
1409 %got_hiadj relocation operators. Sort table and add comment
1410 to explain ordering.
1411 (nios2_fix_adjustable): Test for new relocs.
1412 * doc/c-nios2.texi (Nios II Relocations): Document new relocation
1415 2014-01-30 Sandra Loosemore <sandra@codesourcery.com>
1417 * config/tc-nios2.c (md_apply_fix): Handle BFD_RELOC_NIOS2_CALL26_NOAT.
1418 (nios2_assemble_args_m): Likewise.
1419 (md_assemble): Likewise.
1421 2014-01-24 DJ Delorie <dj@redhat.com>
1423 * config/tc-msp430.c (msp430_section): Always flag data sections,
1425 (msp430_frob_section): New. Make sure all sections are noticed if
1427 (msp430_lcomm): New. Flag bss if .lcomm is seen.
1428 (msp430_comm): New. Likewise.
1429 (md_pseudo_table): Add them.
1430 * config/tc-msp430.h (msp430_frob_section): Declare.
1431 (tc_frob_section): Define.
1433 2014-01-23 Nick Clifton <nickc@redhat.com>
1435 * config/tc-msp430.c (show_mcu_list): Delete.
1436 (md_parse_option): Accept any MCU name. Accept several more
1437 variants for the -mcpu option.
1438 (md_show_usage): Do not call show_mcu_list.
1440 2014-01-22 DJ Delorie <dj@redhat.com>
1442 * config/tc-msp430.c (msp430_refsym): New: ".refsym <symbol>"
1443 * doc/c-msp430.texi (MSP430 Directives): Document it.
1445 2014-01-22 Michael Zolotukhin <michael.v.zolotukhin@gmail.com>
1447 * config/tc-i386.c (check_VecOperands): Remove regzmm from AVX2
1450 2014-01-22 Michael Zolotukhin <michael.v.zolotukhin@gmail.com>
1453 * config/tc-i386.c (check_VecOperands): Add check for invalid
1454 register set in AVX512 gathers.
1456 2014-01-22 Alan Modra <amodra@gmail.com>
1458 * config/tc-tic4x.c (md_shortopts): s/CONST/const/.
1460 2014-01-21 DJ Delorie <dj@redhat.com>
1462 * config/tc-rl78.c (require_end_of_expr): New.
1463 (md_operand): Call it.
1464 (rl78_cons_fix_new): Mark LO16, HI16, ahd HI8 internal relocations
1467 2014-01-17 Will Newton <will.newton@linaro.org>
1469 * config/tc-arm.c (do_vfp_nsyn_cvt_fpv8): Set OP to 1
1470 for the s32.f64 flavours of VCVT.
1472 2014-01-14 Nick Clifton <nickc@redhat.com>
1475 * config/tc-z80.c (wrong_match): Provide format string to
1477 (parse_exp_not_indexed): Delete unused variable dummy.
1478 (emit_byte): Delete unused variable fixp.
1480 2014-01-08 H.J. Lu <hongjiu.lu@intel.com>
1482 * config/tc-i386.c (regbnd): Removed.
1483 (vec_disp8): Likewise.
1485 2014-01-08 H.J. Lu <hongjiu.lu@intel.com>
1487 * as.c (parse_args): Update copyright year to 2014.
1489 2014-01-07 Tom Tromey <tromey@redhat.com>
1491 * config/tc-tic30.c (debug): Avoid old VA_* compatibility
1494 2014-01-07 Tom Tromey <tromey@redhat.com>
1496 * config/tc-microblaze.h (parse_cons_expression_microblaze): Don't
1499 2014-01-07 Tom Tromey <tromey@redhat.com>
1501 * config/tc-xc16x.h: Don't use ANSI_PROTOTYPES.
1503 2013-01-07 Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
1505 * config/tc-aarch64.c (aarch64_cpus): Add entry for "xgene-1"
1507 For older changes see ChangeLog-2013
1509 Copyright (C) 2014 Free Software Foundation, Inc.
1511 Copying and distribution of this file, with or without modification,
1512 are permitted in any medium without royalty provided the copyright
1513 notice and this notice are preserved.
1519 version-control: never