1 2013-10-08 Nick Clifton <nickc@redhat.com>
3 * config/tc-msp430.c (msp430_operands): Accept "<foo>.a" as an alias
4 for "<foo>a". Issue error messages for unrecognised or corrrupt
7 2013-10-04 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
9 * config/tc-arm.c (do_t_mvn_tst): Use narrow form for tst when
12 2013-09-30 Saravanan Ekanathan <saravanan.ekanathan@amd.com>
14 * config/tc-i386.c (cpu_arch): Add CPU_BDVER4_FLAGS.
15 * doc/c-i386.texi: Add -march=bdver4 option.
17 2013-09-20 Alan Modra <amodra@gmail.com>
19 * configure: Regenerate.
21 2013-09-18 Tristan Gingold <gingold@adacore.com>
23 * NEWS: Add marker for 2.24.
25 2013-09-18 Nick Clifton <nickc@redhat.com>
27 * config/tc-msp430.c (OPTION_MOVE_DATA): Define.
28 (move_data): New variable.
29 (md_parse_option): Parse -md.
30 (msp430_section): New function. Catch references to the .bss or
31 .data sections and generate a special symbol for use by the libcrt
33 (md_pseudo_table): Intercept .section directives.
35 (md_show_usage): Likewise.
36 (msp430_operands): Generate a warning message if a NOP is inserted
37 into the instruction stream.
38 * doc/c-msp430.texi (node MSP430 Options): Document -md option.
40 2013-09-17 Doug Gilmore <Doug.Gilmore@imgtec.com>
42 * config/tc-mips.c (mips_elf_final_processing): Set
43 EF_MIPS_FP64 for -mgp32 -mfp64, removing old FIXME.
45 2013-09-16 Will Newton <will.newton@linaro.org>
47 * config/tc-arm.c (do_neon_ld_st_interleave): Add constraint
48 disallowing element size 64 with interleave other than 1.
50 2013-09-12 Chao-ying Fu <Chao-ying.Fu@imgtec.com>
52 * config/tc-mips.c (match_insn): Set error when $31 is used for
55 2013-09-04 Tristan Gingold <gingold@adacore.com>
57 * config/tc-ppc.c (md_apply_fix): Handle defined after use toc
60 2013-09-04 Roland McGrath <mcgrathr@google.com>
63 * config/tc-arm.c (T16_32_TAB): Add _udf.
64 (do_t_udf): New function.
67 2013-08-23 Sandeep Kumar Singh <Sandeep.Singh2@kpitcummins.com>
69 * config/rx-parse.y: Rearrange the components of a bison grammar to issue
70 assembler errors at correct position.
72 2013-08-23 Yuri Chornoivan <yurchor@ukr.net>
75 * config/tc-ia64.c: Fix typos.
76 * config/tc-sparc.c: Likewise.
77 * config/tc-z80.c: Likewise.
78 * doc/c-i386.texi: Likewise.
79 * doc/c-m32r.texi: Likewise.
81 2013-08-23 Will Newton <will.newton@linaro.org>
83 * config/tc-arm.c: (do_neon_ldx_stx): Add extra constraints
84 for pre-indexed addressing modes.
86 2013-08-21 Alan Modra <amodra@gmail.com>
88 * symbols.c (fb_label_instance_inc, fb_label_instance): Properly
89 range check label number for use with fb_low_counter array.
91 2013-08-19 Richard Sandiford <rdsandiford@googlemail.com>
93 * config/tc-mips.c (mips_check_isa_supports_ase, reg_lookup)
94 (mips_parse_argument_token, validate_micromips_insn, md_begin)
95 (check_regno, match_float_constant, check_completed_insn, append_insn)
96 (match_insn, match_mips16_insn, match_insns, macro_start)
97 (macro_build_ldst_constoffset, load_register, macro, mips_ip)
98 (mips16_ip, mips_set_option_string, md_parse_option)
99 (mips_after_parse_args, mips_after_parse_args, md_pcrel_from)
100 (md_apply_fix, s_align, s_option, s_mipsset, s_tls_rel_directive)
101 (s_gpword, s_gpdword, s_ehword, s_nan, tc_gen_reloc, md_convert_frag)
102 (s_mips_end, s_mips_ent, s_mips_frame, s_mips_mask, mips_parse_cpu):
103 Start error messages with a lower-case letter. Do not end error
104 messages with a period. Wrap long messages to 80 character-lines.
105 Use "cannot" instead of "can't" and "can not".
107 2013-08-19 Richard Sandiford <rdsandiford@googlemail.com>
109 * config/tc-mips.c (imm_expr): Expand comment.
110 (set_at, macro, mips16_macro): Expect imm_expr to be O_constant
113 2013-08-19 Richard Sandiford <rdsandiford@googlemail.com>
115 * config/tc-mips.c (imm2_expr): Delete.
116 (md_assemble, match_insn, imm2_expr.X_op, mips_ip): Update accordingly.
118 2013-08-19 Richard Sandiford <rdsandiford@googlemail.com>
120 * config/tc-mips.c (report_bad_range, report_bad_field): Delete.
121 (macro): Remove M_DEXT and M_DINS handling.
123 2013-08-19 Richard Sandiford <rdsandiford@googlemail.com>
125 * config/tc-mips.c (mips_arg_info): Replace allow_nonconst and
126 lax_max with lax_match.
127 (match_int_operand): Update accordingly. Don't report an error
128 for !lax_match-only cases.
129 (match_insn): Replace more_alts with lax_match and use it to
130 initialize the mips_arg_info field. Add a complete_p parameter.
131 Handle implicit VU0 suffixes here.
132 (match_invalid_for_isa, match_insns, match_mips16_insns): New
134 (mips_ip, mips16_ip): Use them.
136 2013-08-19 Richard Sandiford <rdsandiford@googlemail.com>
138 * config/tc-mips.c (match_expression): Report uses of registers here.
139 Add a "must be an immediate expression" error. Handle elided offsets
141 (match_int_operand): ...here.
143 2013-08-19 Richard Sandiford <rdsandiford@googlemail.com>
145 * config/tc-mips.c (mips_arg_info): Remove soft_match.
146 (match_out_of_range, match_not_constant): New functions.
147 (match_const_int): Remove fallback parameter and check for soft_match.
148 Use match_not_constant.
149 (match_mapped_int_operand, match_addiusp_operand)
150 (match_perf_reg_operand, match_save_restore_list_operand)
151 (match_mdmx_imm_reg_operand): Update accordingly. Use
152 match_out_of_range and set_insn_error* instead of as_bad.
153 (match_int_operand): Likewise. Use match_not_constant in the
154 !allows_nonconst case.
155 (match_float_constant): Report invalid float constants.
156 (match_insn, match_mips16_insn): Remove soft_match code. Rely on
157 match_float_constant to check for invalid constants. Fail the
158 match if match_const_int or match_float_constant return false.
159 (mips_ip): Update accordingly.
160 (mips16_ip): Likewise. Undo null termination of instruction name
161 once lookup is complete.
163 2013-08-19 Richard Sandiford <rdsandiford@googlemail.com>
165 * config/tc-mips.c (mips_insn_error_format): New enum.
166 (mips_insn_error): New struct.
167 (insn_error): Change to a mips_insn_error.
168 (clear_insn_error, set_insn_error_format, set_insn_error)
169 (set_insn_error_i, set_insn_error_ss, report_insn_error): New
171 (mips_parse_argument_token, md_assemble, match_insn)
172 (match_mips16_insn): Use them instead of manipulating insn_error
174 (mips_ip, mips16_ip): Likewise. Simplify control flow.
176 2013-08-19 Richard Sandiford <rdsandiford@googlemail.com>
178 * config/tc-mips.c (normalize_constant_expr): Move further up file.
179 (normalize_address_expr): Likewise.
180 (match_insn, match_mips16_insn): New functions, split out from...
181 (mips_ip, mips16_ip): ...here.
183 2013-08-19 Richard Sandiford <rdsandiford@googlemail.com>
185 * config/tc-mips.c (operand_reg_mask, match_operand): Handle
187 (mips_ip, mips16_ip): Use mips_optional_operand_p to check
188 for optional operands.
190 2013-08-16 Alan Modra <amodra@gmail.com>
192 * config/tc-ppc.c (ppc_elf_cons): Allow @l and other reloc
195 2013-08-16 Alan Modra <amodra@gmail.com>
197 * config/tc-ppc.c (ppc_elf_lcomm): Use subsection 1.
199 2013-08-14 David Edelsohn <dje.gcc@gmail.com>
201 * config/tc-ppc.c (ppc_comm): Accept optional fourth .lcomm
202 argument as alignment.
204 2013-08-09 Nick Clifton <nickc@redhat.com>
206 * config/tc-rl78.c (elf_flags): New variable.
207 (enum options): Add OPTION_G10.
208 (md_longopts): Add mg10.
209 (md_parse_option): Parse -mg10.
210 (rl78_elf_final_processing): New function.
211 * config/tc-rl78.c (tc_final_processing): Define.
212 * doc/c-rl78.texi: Document -mg10 option.
214 2013-08-06 Jürgen Urban <JuergenUrban@gmx.de>
216 * config/tc-mips.c (match_vu0_suffix_operand): Allow single-channel
217 suffixes to be elided too.
218 (mips_lookup_insn): Don't reject INSN2_VU0_CHANNEL_SUFFIX here.
219 (mips_ip): Assume .xyzw if no VU0 suffix is specified. Allow +N
222 2013-08-05 John Tytgat <john@bass-software.com>
224 * po/POTFILES.in: Regenerate.
226 2013-08-05 Eric Botcazou <ebotcazou@adacore.com>
227 Konrad Eisele <konrad@gaisler.com>
229 * config/tc-sparc.c (sparc_arch_types): Add leon.
230 (sparc_arch): Move sparc4 around and add leon.
231 (sparc_target_format): Document -Aleon.
232 * doc/c-sparc.texi: Likewise.
234 2013-08-05 Richard Sandiford <rdsandiford@googlemail.com>
236 * config/tc-mips.c (mips_lookup_insn): Make length and opend signed.
238 2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
239 Richard Sandiford <rdsandiford@googlemail.com>
241 * config/tc-mips.c (MAX_OPERANDS): Bump to 6.
242 (RWARN): Bump to 0x8000000.
243 (RTYPE_VI, RTYPE_VF, RTYPE_R5900_I, RTYPE_R5900_Q, RTYPE_R5900_R)
244 (RTYPE_R5900_ACC): New register types.
245 (RTYPE_MASK): Include them.
246 (R5900_I_NAMES, R5900_Q_NAMES, R5900_R_NAMES, R5900_ACC_NAMES): New
248 (reg_names): Include them.
249 (mips_parse_register_1): New function, split out from...
250 (mips_parse_register): ...here. Add a channels_ptr parameter.
251 Look for VU0 channel suffixes when nonnull.
252 (reg_lookup): Update the call to mips_parse_register.
253 (mips_parse_vu0_channels): New function.
254 (OT_CHANNELS, OT_DOUBLE_CHAR): New mips_operand_token_types.
255 (mips_operand_token): Add a "channels" field to the union.
256 Extend the comment above "ch" to OT_DOUBLE_CHAR.
257 (mips_parse_base_start): Match -- and ++. Handle channel suffixes.
258 (mips_parse_argument_token): Handle channel suffixes here too.
259 (validate_mips_insn): Handle INSN2_VU0_CHANNEL_SUFFIX.
260 Ignore OP_VU0_MATCH_SUFFIX when calculating the used bits.
262 (md_begin): Register $vfN and $vfI registers.
263 (operand_reg_mask): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
264 (convert_reg_type): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I,
265 OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC.
266 (match_vu0_suffix_operand): New function.
267 (match_operand): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
268 (macro): Use "+7" rather than "E" for LDQ2 and STQ2.
269 (mips_lookup_insn): New function.
270 (mips_ip): Use it. Allow "+K" operands to be elided at the end
271 of an instruction. Handle '#' sequences.
273 2013-08-03 Richard Sandiford <rdsandiford@googlemail.com>
275 * config/tc-mips.c (macro, mips16_macro): Create an array of operand
276 values and use it instead of sreg, treg, xreg, etc.
278 2013-08-03 Richard Sandiford <rdsandiford@googlemail.com>
280 * config/tc-mips.c (match_int_operand): Use mips_int_operand_min
281 and mips_int_operand_max.
282 (mips16_immed_operand, mips16_immed_operands, MIPS16_NUM_IMMED):
284 (mips16_immed_operand, mips16_immed_in_range_p): New functions.
285 (mips16_immed, mips16_extended_frag): Use them. Use mips_int_operand
286 instead of mips16_immed_operand.
288 2013-08-03 Richard Sandiford <rdsandiford@googlemail.com>
290 * config/tc-mips.c (mips16_macro): Don't use move_register.
291 (mips16_ip): Allow macros to use 'p'.
293 2013-08-01 Richard Sandiford <rdsandiford@googlemail.com>
295 * config/tc-mips.c (MAX_OPERANDS): New macro.
296 (mips_operand_array): New structure.
297 (mips_operands, mips16_operands, micromips_operands): New arrays.
298 (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map)
299 (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map)
300 (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map)
301 (micromips_to_32_reg_q_map): Delete.
302 (insn_operands, insn_opno, insn_extract_operand): New functions.
303 (validate_mips_insn): Take a mips_operand_array as argument and
304 use it to build up a list of operands. Extend to handle INSN_MACRO
306 (validate_mips16_insn): New function.
307 (validate_micromips_insn): Take a mips_operand_array as argument.
309 (md_begin): Initialize mips_operands, mips16_operands and
310 micromips_operands. Call validate_mips_insn and
311 validate_micromips_insn for macro instructions too.
312 Call validate_mips16_insn for MIPS16 instructions.
313 (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask):
315 (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use
316 them. Handle INSN_UDI.
317 (get_append_method): Use gpr_read_mask.
319 2013-08-01 Richard Sandiford <rdsandiford@googlemail.com>
321 * config/tc-mips.c (compact_branch_p, uncond_branch_p): Use the same
322 flags for MIPS16 and non-MIPS16 instructions.
323 (gpr_mod_mask): Move the INSN2_MOD_SP case outside the micromips block.
324 (gpr_read_mask): Use INSN2_READ_GPR_31 for MIPS16 instructions too.
325 (gpr_write_mask): Remove MIPS16_INSN_WRITE_SP handling.
326 (can_swap_branch_p, get_append_method): Use the same flags for MIPS16
327 and non-MIPS16 instructions. Fix formatting.
329 2013-08-01 Richard Sandiford <rdsandiford@googlemail.com>
331 * config/tc-mips.c (reg_needs_delay): Move later in file.
333 (insns_between): Use gpr_read_mask instead of EXTRACT_OPERAND.
335 2013-07-26 Sergey Guriev <sergey.s.guriev@intel.com>
336 Alexander Ivchenko <alexander.ivchenko@intel.com>
337 Maxim Kuznetsov <maxim.kuznetsov@intel.com>
338 Sergey Lega <sergey.s.lega@intel.com>
339 Anna Tikhonova <anna.tikhonova@intel.com>
340 Ilya Tocar <ilya.tocar@intel.com>
341 Andrey Turetskiy <andrey.turetskiy@intel.com>
342 Ilya Verbin <ilya.verbin@intel.com>
343 Kirill Yukhin <kirill.yukhin@intel.com>
344 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
346 * config/tc-i386-intel.c (O_zmmword_ptr): New.
347 (i386_types): Add zmmword.
348 (i386_intel_simplify_register): Allow regzmm.
349 (i386_intel_simplify): Handle zmmwords.
350 (i386_intel_operand): Handle RC/SAE, vector operations and
352 * config/tc-i386.c (ZMMWORD_MNEM_SUFFIX): New.
353 (struct RC_Operation): New.
354 (struct Mask_Operation): New.
355 (struct Broadcast_Operation): New.
356 (vex_prefix): Size of bytes increased to 4 to support EVEX
358 (enum i386_error): Add new error codes: unsupported_broadcast,
359 broadcast_not_on_src_operand, broadcast_needed,
360 unsupported_masking, mask_not_on_destination, no_default_mask,
361 unsupported_rc_sae, rc_sae_operand_not_last_imm,
362 invalid_register_operand, try_vector_disp8.
363 (struct _i386_insn): Add new fields vrex, need_vrex, mask,
364 rounding, broadcast, memshift.
365 (struct RC_name): New.
366 (RC_NamesTable): New.
369 (extra_symbol_chars): Add '{'.
370 (cpu_arch): Add AVX512F, AVX512CD, AVX512ER and AVX512PF.
371 (i386_operand_type): Add regzmm, regmask and vec_disp8.
372 (match_mem_size): Handle zmmwords.
373 (operand_type_match): Handle zmm-registers.
374 (mode_from_disp_size): Handle vec_disp8.
375 (fits_in_vec_disp8): New.
376 (md_begin): Handle {} properly.
377 (type_names): Add "rZMM", "Mask reg" and "Vector d8".
378 (build_vex_prefix): Handle vrex.
379 (build_evex_prefix): New.
380 (process_immext): Adjust to properly handle EVEX.
381 (md_assemble): Add EVEX encoding support.
382 (swap_2_operands): Correctly handle operands with masking,
383 broadcasting or RC/SAE.
384 (check_VecOperands): Support EVEX features.
385 (VEX_check_operands): Properly handle 16 upper [xyz]mm registers.
386 (match_template): Support regzmm and handle new error codes.
387 (process_suffix): Handle zmmwords and zmm-registers.
388 (check_byte_reg): Extend to zmm-registers.
389 (process_operands): Extend to zmm-registers.
390 (build_modrm_byte): Handle EVEX.
391 (output_insn): Adjust to properly handle EVEX case.
392 (disp_size): Handle vec_disp8.
393 (output_disp): Support compressed disp8*N evex feature.
394 (output_imm): Handle RC/SAE immediates properly.
395 (check_VecOperations): New.
396 (i386_immediate): Handle EVEX features.
397 (i386_index_check): Handle zmmwords and zmm-registers.
398 (RC_SAE_immediate): New.
399 (i386_att_operand): Handle EVEX features.
400 (parse_real_register): Add a check for ZMM/Mask registers.
401 (OPTION_MEVEXLIG): New.
402 (OPTION_MEVEXWIG): New.
403 (md_longopts): Add mevexlig and mevexwig.
404 (md_parse_option): Handle mevexlig and mevexwig options.
405 (md_show_usage): Add description for mevexlig and mevexwig.
406 * doc/c-i386.texi: Document avx512f/.avx512f, avx512cd/.avx512cd,
407 avx512er/.avx512er, avx512pf/.avx512pf, mevexlig and mevexwig.
409 2013-07-25 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
411 * config/tc-i386.c (cpu_arch): Add .sha.
412 * doc/c-i386.texi: Document sha/.sha.
414 2013-07-24 Anna Tikhonova <anna.tikhonova@intel.com>
415 Kirill Yukhin <kirill.yukhin@intel.com>
416 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
418 * config/tc-i386.c (BND_PREFIX): New.
419 (struct _i386_insn): Add new field bnd_prefix.
420 (add_bnd_prefix): New.
422 (i386_operand_type): Add regbnd.
423 (md_assemble): Handle BND prefixes.
424 (parse_insn): Likewise.
425 (output_branch): Likewise.
426 (output_jump): Likewise.
427 (build_modrm_byte): Handle regbnd.
428 (OPTION_MADD_BND_PREFIX): New.
429 (md_longopts): Add entry for 'madd-bnd-prefix'.
430 (md_parse_option): Handle madd-bnd-prefix option.
431 (md_show_usage): Add description for madd-bnd-prefix
433 * doc/c-i386.texi: Document mpx/.mpx and -madd-bnd-prefix.
435 2013-07-24 Tristan Gingold <gingold@adacore.com>
437 * config/tc-ppc.c (md_apply_fix): Adjust BFD_RELOC_PPC_B16 on
440 2013-07-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
442 * config/tc-s390.c (s390_machine): Don't force the .machine
443 argument to lower case.
445 2013-07-22 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
447 * config/tc-arm.c (s_arm_arch_extension): Improve error message
448 for invalid extension.
450 2013-07-19 Yufeng Zhang <yufeng.zhang@arm.com>
452 * config/tc-aarch64.c (enum aarch64_abi_type): New enumeration tag.
453 (AARCH64_ABI_LP64, AARCH64_ABI_ILP32): New enumerators.
454 (aarch64_abi): New variable.
455 (ilp32_p): Change to be a macro.
456 (aarch64_opts): Remove the support for option -milp32 and -mlp64.
457 (struct aarch64_option_abi_value_table): New struct.
458 (aarch64_abis): New table.
459 (aarch64_parse_abi): New function.
460 (aarch64_long_opts): Add entry for -mabi=.
461 * doc/as.texinfo (Target AArch64 options): Document -mabi.
462 * doc/c-aarch64.texi: Likewise.
464 2013-07-18 Jim Thomas <thomas@cfht.hawaii.edu>
466 * config/tc-i386-intel.c (i386_intel_operand): Fixed signed vs
469 2013-07-18 Sandeep Kumar Singh <Sandeep.Singh2@kpitcummins.com>
471 * config/rx-defs.h: Add macros for RX100, RX200, RX600, and
473 * config/rx-parse.y: (rx_check_float_support): Add function to
474 check floating point operation support for target RX100 and
476 * config/tc-rx.c: Add CPU options RX100, RX200, RX600, and RX610.
477 * doc/c-rx.texi: Add -mcpu option to recognize macros for RX100,
478 RX200, RX600, and RX610
480 2013-07-18 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
482 * config/tc-avr.c (md_show_usage): Add avrxmega2 to help text
484 2013-07-18 Vishnu K.S <vishnu.k_s@atmel.com>
486 * config/tc-avr.c: Make ata6289's ISA to AVR_ISA_AVR4.
487 * doc/c-avr.texi: Likewise.
489 2013-07-15 Richard Sandiford <rdsandiford@googlemail.com>
491 * config/tc-mips.c (match_save_restore_list_operand): Avoid -Wformat
492 error with older GCCs.
493 (mips16_macro_build): Dereference args.
495 2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
497 * config/tc-mips.c (mips_prefer_vec_regno, mips_parse_register):
498 New functions, split out from...
499 (reg_lookup): ...here. Remove itbl support.
500 (reglist_lookup): Delete.
501 (mips_operand_token_type): New enum.
502 (mips_operand_token): New structure.
503 (mips_operand_tokens): New variable.
504 (mips_add_token, mips_parse_base_start, mips_parse_argument_token)
505 (mips_parse_arguments): New functions.
506 (md_begin): Initialize mips_operand_tokens.
507 (mips_arg_info): Add a token field. Remove optional_reg field.
508 (match_char, match_expression): New functions.
509 (match_const_int): Use match_expression. Remove "s" argument
510 and return a boolean result. Remove O_register handling.
511 (match_regno, match_reg, match_reg_range): New functions.
512 (match_int_operand, match_mapped_int_operand, match_msb_operand)
513 (match_reg_operand, match_reg_pair_operand, match_perf_reg_operand)
514 (match_addiusp_operand, match_clo_clz_dest_operand)
515 (match_lwm_swm_list_operand, match_entry_exit_operand)
516 (match_save_restore_list_operand, match_mdmx_imm_reg_operand)
517 (match_tied_reg_operand): Remove "s" argument and return a boolean
518 result. Match tokens rather than text. Update calls to
519 match_const_int. Rely on match_regno to call check_regno.
520 (match_pcrel_operand, match_pc_operand): Replace "s" argument with
521 "arg" argument. Return a boolean result.
522 (parse_float_constant): Replace with...
523 (match_float_constant): ...this new function.
524 (match_operand): Remove "s" argument and return a boolean result.
525 Update calls to subfunctions.
526 (mips_ip, mips16_ip): Call mips_parse_arguments. Use match routines
527 rather than string-parsing routines. Update handling of optional
528 registers for token scheme.
530 2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
532 * config/tc-mips.c (parse_float_constant): Split out from...
535 2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
537 * config/tc-mips.c (INSERT_BITS, INSERT_OPERAND, MIPS16_INSERT_OPERAND):
540 2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
542 * config/tc-mips.c (mips32_to_16_reg_map): Delete.
543 (match_entry_exit_operand): New function.
544 (match_save_restore_list_operand): Likewise.
545 (match_operand): Use them.
546 (check_absolute_expr): Delete.
547 (mips16_ip): Rewrite main parsing loop to use mips_operands.
549 2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
551 * config/tc-mips.c: Enable functions commented out in previous patch.
552 (SKIP_SPACE_TABS): Move further up file.
553 (mips32_to_micromips_reg_b_map, mips32_to_micromips_reg_c_map)
554 (mips32_to_micromips_reg_d_map, mips32_to_micromips_reg_e_map)
555 (ips32_to_micromips_reg_f_map, mips32_to_micromips_reg_g_map)
556 (mips32_to_micromips_reg_l_map, mips32_to_micromips_reg_m_map)
557 (mips32_to_micromips_reg_q_map, mips32_to_micromips_reg_n_map)
558 (micromips_imm_b_map, micromips_imm_c_map): Delete.
559 (mips_lookup_reg_pair): Delete.
560 (macro): Use report_bad_range and report_bad_field.
561 (mips_immed, expr_const_in_range): Delete.
562 (mips_ip): Rewrite main parsing loop to use new functions.
564 2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
566 * config/tc-mips.c (mips_oddfpreg_ok): Move further up file.
567 Change return type to bfd_boolean.
568 (report_bad_range, report_bad_field): New functions.
569 (mips_arg_info): New structure.
570 (match_const_int, convert_reg_type, check_regno, match_int_operand)
571 (match_mapped_int_operand, match_msb_operand, match_reg_operand)
572 (match_reg_pair_operand, match_pcrel_operand, match_perf_reg_operand)
573 (match_addiusp_operand, match_clo_clz_dest_operand)
574 (match_lwm_swm_list_operand, match_mdmx_imm_reg_operand)
575 (match_pc_operand, match_tied_reg_operand, match_operand)
576 (check_completed_insn): New functions, commented out for now.
578 2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
580 * config/tc-mips.c (insn_insert_operand): New function.
581 (macro_build, mips16_macro_build): Put null character check
582 in the for loop and convert continues to breaks. Use operand
583 structures to handle constant operands.
585 2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
587 * config/tc-mips.c (validate_mips_insn): Move further up file.
588 Add insn_bits and decode_operand arguments. Use the mips_operand
589 fields to work out which bits an operand occupies. Detect double
591 (validate_micromips_insn): Move further up file. Call into
594 2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
596 * config/tc-mips.c (mips16_macro_build): Remove 'Y' case.
598 2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
600 * config/tc-mips.c (macro_build): Take an int for "C", "k", "\\"
602 (macro): Update accordingly.
604 2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
606 * config/tc-mips.c (imm_expr, imm2_expr, offset_expr): Tweak commentary.
608 (md_assemble): Remove imm_reloc handling.
609 (mips_ip): Update commentary. Use offset_expr and offset_reloc
610 rather than imm_expr and imm_reloc for 'i', 'j' and 'u'.
611 Use a temporary array rather than imm_reloc when parsing
612 constant expressions. Remove imm_reloc initialization.
613 (mips16_ip): Update commentary. Use offset_expr and offset_reloc
614 for the relaxable field. Use a relax_char variable to track the
615 type of this field. Remove imm_reloc initialization.
617 2013-07-14 Richard Sandiford <rdsandiford@googlemail.com>
619 * config/tc-mips.c (mips16_ip): Handle "I".
621 2013-07-12 Maciej W. Rozycki <macro@codesourcery.com>
623 * config/tc-mips.c (mips_flag_nan2008): New variable.
624 (options): Add OPTION_NAN enum value.
625 (md_longopts): Handle it.
626 (md_parse_option): Likewise.
627 (s_nan): New function.
628 (mips_elf_final_processing): Handle EF_MIPS_NAN2008.
629 (md_show_usage): Add -mnan.
631 * doc/as.texinfo (Overview): Add -mnan.
632 * doc/c-mips.texi (MIPS Opts): Document -mnan.
633 (MIPS NaN Encodings): New node. Document .nan directive.
634 (MIPS-Dependent): List the new node.
636 2013-07-09 Tristan Gingold <gingold@adacore.com>
638 * configure.com: Define HAVE_SYS_TYPES_H and HAVE_UNISTD_H
640 2013-07-08 Richard Sandiford <rdsandiford@googlemail.com>
642 * config/tc-mips.c (mips_ip): Unconditionally parse an expression
643 for 'A' and assume that the constant has been elided if the result
646 2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
648 * config/tc-mips.c (gprel16_reloc_p): New function.
649 (macro_read_relocs): Assume BFD_RELOC_LO16 if all relocs are
651 (offset_high_part, small_offset_p): New functions.
652 (nacro): Use them. Remove *_OB and *_DOB cases. For single-
653 register load and store macros, handle the 16-bit offset case first.
654 If a 16-bit offset is not suitable for the instruction we're
655 generating, load it into the temporary register using
656 ADDRESS_ADDI_INSN. Make the M_LI_DD code fall through into the
657 M_L_DAB code once the address has been constructed. For double load
658 and store macros, again handle the 16-bit offset case first.
659 If the second register cannot be accessed from the same high
660 part as the first, load it into AT using ADDRESS_ADDI_INSN.
661 Fix the handling of LD in cases where the first register is the
662 same as the base. Also handle the case where the offset is
663 not 16 bits and the second register cannot be accessed from the
664 same high part as the first. For unaligned loads and stores,
665 fuse the offbits == 12 and old "ab" handling. Apply this handling
666 whenever the second offset needs a different high part from the first.
667 Construct the offset using ADDRESS_ADDI_INSN where possible,
668 for offbits == 16 as well as offbits == 12. Use offset_reloc
669 when constructing the individual loads and stores.
670 (mips_ip): Set up imm_expr, imm2_expr, offset_expr, imm_reloc
671 and offset_reloc before matching against a particular opcode.
672 Handle elided 'A' constants. Allow 'A' constants to use
673 relocation operators.
675 2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
677 * config/tc-mips.c (validate_mips_insn): Remove "[" and "]" handling.
678 (mips_ip): Likewise. Do not set is_mdmx for INSN_5400 instructions.
679 Check constraints on the VR5400 RZU.OB, SLL.OB and SRL.OB instructions.
681 2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
683 * config/tc-mips.c (mips_ip): Preserve the real bit number for "+p".
684 Require the msb to be <= 31 for "+s". Check that the size is <= 31
685 for both "+s" and "+S".
687 2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
689 * config/tc-mips.c (validate_mips_insn, validate_micromips_insn):
690 (mips_ip, mips16_ip): Handle "+i".
692 2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
694 * config/tc-mips.c (mips32_to_micromips_reg_h_map): Delete.
695 (micromips_to_32_reg_h_map): Rename to...
696 (micromips_to_32_reg_h_map1): ...this.
697 (micromips_to_32_reg_i_map): Rename to...
698 (micromips_to_32_reg_h_map2): ...this.
699 (mips_lookup_reg_pair): New function.
700 (gpr_write_mask, macro): Adjust after above renaming.
701 (validate_micromips_insn): Remove "mi" handling.
702 (mips_ip): Likewise. Parse both registers in a pair for "mh".
704 2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
706 * config/tc-mips.c (validate_mips_insn, validate_micromips_insn)
707 (mips_ip): Remove "+D" and "+T" handling.
709 2013-07-05 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
711 * config/tc-s390.c (md_gather_operands, md_apply_fix): Support new
714 2013-07-03 Marcus Shawcroft <marcus.shawcroft@arm.com>
716 * config/tc-aarch64.c (reloc_table): Merge got_prel19 into got.
718 2013-07-02 Marcus Shawcroft <marcus.shawcroft@arm.com>
720 * config/tc-aarch64.c (md_apply_fix): Reorder case values.
721 (aarch64_force_relocation): Likewise.
723 2013-07-02 Alan Modra <amodra@gmail.com>
725 * config/tc-ppc.c (ppc_elf_adjust_symtab): Don't make .TOC. weak.
727 2013-06-26 Maciej W. Rozycki <macro@codesourcery.com>
729 * doc/as.texinfo (Overview): Remove @samp from MIPS ISA names.
730 * doc/c-mips.texi (MIPS Options): Remove @sc from MIPS ISA names.
731 Replace @sc{mips16} with literal `MIPS16'.
732 (MIPS ISA): Replace @sc{mips3} with literal `MIPS III'.
734 2013-06-26 Yufeng Zhang <yufeng.zhang@arm.com>
736 * config/tc-aarch64.c (reloc_table): Replace
737 BFD_RELOC_AARCH64_LD64_GOT_LO12_NC with
738 BFD_RELOC_AARCH64_LD_GOT_LO12_NC; likewise to
739 BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC and
740 BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_LO12_NC.
741 (md_apply_fix): Handle BFD_RELOC_AARCH64_LD_GOT_LO12_NC,
742 BFD_RELOC_AARCH64_LD32_GOT_LO12_NC,
743 BFD_RELOC_AARCH64_TLSDESC_LD_LO12_NC,
744 BFD_RELOC_AARCH64_TLSDESC_LD32_LO12_NC,
745 BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_LO12_NC and
746 BFD_RELOC_AARCH64_TLSIE_LD32_GOTTPREL_LO12_NC.
747 (aarch64_force_relocation): Likewise.
749 2013-06-26 Yufeng Zhang <yufeng.zhang@arm.com>
751 * config/tc-aarch64.c (ilp32_p): New static variable.
752 (elf64_aarch64_target_format): Return the target according to the
754 (md_begin): Determine 'mach' according to the value of 'ilp32_p'.
755 (aarch64_opts): Add support for options '-milp32' and '-mlp64'.
756 (aarch64_dwarf2_addr_size): New function.
757 * config/tc-aarch64.h (aarch64_dwarf2_addr_size): New declaration.
758 (DWARF2_ADDR_SIZE): New define.
760 2013-06-26 Richard Sandiford <rdsandiford@googlemail.com>
762 * doc/c-mips.texi: Use ISA instead of @sc{isa}.
764 2013-06-26 Richard Sandiford <rdsandiford@googlemail.com>
766 * config/tc-mips.c (validate_mips_insn): Use STYPE rather than SHAMT.
768 2013-06-25 Maciej W. Rozycki <macro@codesourcery.com>
770 * config/tc-mips.c (mips_set_options): Add insn32 member.
771 (mips_opts): Initialize it.
772 (NOP_INSN, NOP_INSN_SIZE): Handle insn32 mode.
773 (options): Add OPTION_INSN32 and OPTION_NO_INSN32 enum values.
774 (md_longopts): Add "minsn32" and "mno-insn32" options.
775 (is_size_valid): Handle insn32 mode.
776 (md_assemble): Pass instruction string down to macro.
777 (brk_fmt): Add second dimension and insn32 mode initializers.
778 (mfhl_fmt): Likewise.
779 (BRK_FMT, MFHL_FMT): Handle insn32 mode.
780 (macro_build) <'c'>: Handle microMIPS 32-bit BREAK encoding.
781 (macro_build_jalr, move_register): Handle insn32 mode.
782 (macro_build_branch_rs): Likewise.
783 (macro): Handle insn32 mode.
784 <M_JRADDIUSP>, <M_JRC>, <M_MOVEP>: New cases.
785 (mips_ip): Handle insn32 mode.
786 (md_parse_option): Handle OPTION_INSN32 and OPTION_NO_INSN32.
787 (s_mipsset): Handle "insn32" and "noinsn32" pseudo-ops.
788 (mips_handle_align): Handle insn32 mode.
789 (md_show_usage): Add -minsn32 and -mno-insn32.
791 * doc/as.texinfo (Target MIPS options): Add -minsn32 and
793 (-minsn32, -mno-insn32): New options.
794 * doc/c-mips.texi (MIPS Opts): Add -minsn32 and -mno-insn32
796 (MIPS assembly options): New node. Document .set insn32 and
798 (MIPS-Dependent): List the new node.
800 2013-06-25 Nick Clifton <nickc@redhat.com>
802 * config/tc-msp430.c (msp430_srcoperand): Do not allow the use of
803 the PC in indirect addressing on 430xv2 parts.
804 (msp430_operands): Add version test to hardware bug encoding
807 2013-06-24 Roland McGrath <mcgrathr@google.com>
809 * config/tc-arm.c (parse_reg_list): Use skip_past_char for '}',
810 so it skips whitespace before it.
811 (s_arm_unwind_save_mmxwr, s_arm_unwind_save_mmxwcg): Likewise.
813 * config/tc-arm.c (arm_symbol_chars): Include '{' and '}'.
814 (arm_reg_parse_multi): Skip whitespace first.
815 (parse_reg_list): Likewise.
816 (parse_vfp_reg_list): Likewise.
817 (s_arm_unwind_save_mmxwcg): Likewise.
819 2013-06-24 Nick Clifton <nickc@redhat.com>
822 * config/tc-arm.c (do_t_smc): Mark as ending an IT block.
824 2013-06-23 Richard Sandiford <rdsandiford@googlemail.com>
826 * config/tc-mips.c (mips_ip): Fix swapped bit numbers in comments.
828 2013-06-23 Richard Sandiford <rdsandiford@googlemail.com>
830 * config/tc-mips.c: Assert that offsetT and valueT are at least
832 (GPR_SMIN, GPR_SMAX): New macros.
833 (macro, mips_ip): Remove code for 4-byte valueT and offsetT.
835 2013-06-22 Richard Sandiford <rdsandiford@googlemail.com>
837 * config/tc-mips.c: Remove OBJ_ELF, OBJ_MAYBE_ELF and IS_ELF
838 conditions. Remove any code deselected by them.
839 (s_mips_frame, s_mips_mask): Handle ECOFF_DEBUGGING case first.
841 2013-06-22 Richard Sandiford <rdsandiford@googlemail.com>
843 * NEWS: Note removal of ECOFF support.
844 * doc/as.texinfo (--emulation): Update for the removal of MIPS ECOFF.
845 * Makefile.am (TARG_ENV_HFILES): Remove config/te-lnews.h.
846 (MULTI_CFILES): Remove config/e-mipsecoff.c.
847 * Makefile.in: Regenerate.
848 * configure.in: Remove MIPS ECOFF references.
849 (mips-sony-bsd*, mips-*-bsd*, mips-*-lnews*-ecoff, mips-*-*-ecoff):
851 (mips-*-irix5*-*, mips*-*-linux*-*, mips*-*-freebsd*)
852 (mips*-*-kfreebsd*-gnu, mips-*-*-elf): Fold into...
853 (mips-*-*): ...this single case.
854 (mipsbecoff, mipslecoff, mipsecoff): Remove emulations. Expect
855 MIPS emulations to be e-mipself*.
856 * configure: Regenerate.
857 * configure.tgt (mips-sony-bsd*, mips-*-ultrix*, mips-*-osf*)
858 (mips-*-ecoff*, mips-*-pe*, mips-*-irix*, ips-*-lnews*, mips-*-riscos*)
859 (mips-*-sysv*): Remove coff and ecoff cases.
860 * as.c (mipsbecoff, mipslecoff, mipsecoff): Remove.
861 * ecoff.c: Remove reference to MIPS ECOFF.
862 * config/e-mipsecoff.c, config/te-lnews.h: Delete files.
863 * config/tc-mips.c (ECOFF_LITTLE_FORMAT): Delete.
864 (RDATA_SECTION_NAME, mips_target_form): Remove COFF and ECOFF cases.
865 (mips_hi_fixup): Tweak comment.
866 (append_insn): Require a howto.
867 (mips_after_parse_args): Remove OBJ_MAYBE_ECOFF code.
869 2013-06-22 Richard Sandiford <rdsandiford@googlemail.com>
871 * doc/as.texinfo: Use MIPS rather than @sc{mips} throughout.
872 Use "CPU" instead of "cpu".
873 * doc/c-mips.texi: Likewise.
874 (MIPS Opts): Rename to MIPS Options.
875 (MIPS option stack): Rename to MIPS Option Stack.
876 (MIPS ASE instruction generation overrides): Rename to
877 MIPS ASE Instruction Generation Overrides (for now).
878 (MIPS floating-point): Rename to MIPS Floating-Point.
880 2013-06-22 Richard Sandiford <rdsandiford@googlemail.com>
882 * doc/c-mips.texi (MIPS Macros): New section.
883 (MIPS Object): Replace with...
884 (MIPS Small Data): ...this new section.
886 2013-06-22 Richard Sandiford <rdsandiford@googlemail.com>
888 * doc/c-mips.texi (MIPS symbol sizes): Move section further up file.
889 Capitalize name. Use @kindex instead of @cindex for .set entries.
891 2013-06-22 Richard Sandiford <rdsandiford@googlemail.com>
893 * doc/c-mips.texi (MIPS Stabs): Remove section.
895 2013-06-20 Richard Sandiford <rdsandiford@googlemail.com>
897 * config/tc-mips.c (ISA_SUPPORTS_SMARTMIPS, ISA_SUPPORTS_DSP_ASE)
898 (ISA_SUPPORTS_DSP64_ASE, ISA_SUPPORTS_DSPR2_ASE, ISA_SUPPORTS_EVA_ASE)
899 (ISA_SUPPORTS_MT_ASE, ISA_SUPPORTS_MCU_ASE, ISA_SUPPORTS_VIRT_ASE)
900 (ISA_SUPPORTS_VIRT64_ASE): Delete.
901 (mips_ase): New structure.
902 (mips_ases): New table.
903 (FP64_ASES): New macro.
904 (mips_ase_groups): New array.
905 (mips_isa_rev, mips_ase_mask, mips_check_isa_supports_ase)
906 (mips_check_isa_supports_ases, mips_set_ase, mips_lookup_ase): New
908 (is_opcode_valid): Use mips_ases to get the 64-bit ASE flags.
909 (md_parse_option): Use mips_ases and mips_set_ase instead of
910 separate case statements for each ASE option.
911 (mips_after_parse_args): Use FP64_ASES. Use
912 mips_check_isa_supports_ases to check the ASEs against
914 (s_mipsset): Use mips_ases and mips_set_ase instead of
915 separate if statements for each ASE option. Use
916 mips_check_isa_supports_ases, even when a non-ASE option
919 2013-06-19 Greta Yorsh <Greta.Yorsh@arm.com>
921 * config/tc-arm.c (arm_cpus): Add support for Cortex-A12.
923 2013-06-18 Richard Sandiford <rdsandiford@googlemail.com>
925 * config/tc-mips.c (md_shortopts, options, md_longopts)
926 (md_longopts_size): Move earlier in file.
928 2013-06-18 Richard Sandiford <rdsandiford@googlemail.com>
930 * config/tc-mips.c (mips_set_options): Replace separate "ase_*" fields
931 with a single "ase" bitmask.
932 (mips_opts): Update accordingly.
933 (file_ase, file_ase_explicit): New variables.
934 (file_ase_mips3d, file_ase_mdmx, file_ase_smartmips, file_ase_dsp)
935 (file_ase_dspr2, file_ase_eva, file_ase_mt, file_ase_virt): Delete.
936 (ISA_HAS_ROR): Adjust for mips_set_options change.
937 (is_opcode_valid): Take the base ase mask directly from mips_opts.
938 (mips_ip): Adjust for mips_set_options change.
939 (md_parse_option): Likewise. Update file_ase_explicit.
940 (mips_after_parse_args): Adjust for mips_set_options change.
941 Use bitmask operations to select the default ASEs. Set file_ase
942 rather than individual per-ASE variables.
943 (s_mipsset): Adjust for mips_set_options change.
944 (mips_elf_final_processing): Test file_ase rather than
945 file_ase_mdmx. Remove commented-out code.
947 2013-06-18 Richard Sandiford <rdsandiford@googlemail.com>
949 * config/tc-mips.c (mips_cpu_info): Add an "ase" field.
950 (MIPS_CPU_ASE_SMARTMIPS, MIPS_CPU_ASE_DSP, MIPS_CPU_ASE_MT)
951 (MIPS_CPU_ASE_MIPS3D, MIPS_CPU_ASE_MDMX, MIPS_CPU_ASE_DSPR2)
952 (MIPS_CPU_ASE_MCU, MIPS_CPU_ASE_VIRT, MIPS_CPU_ASE_EVA): Delete.
953 (mips_after_parse_args): Use the new "ase" field to choose
955 (mips_cpu_info_table): Move ASEs from the "flags" field to the
958 2013-06-18 Richard Earnshaw <rearnsha@arm.com>
960 * config/tc-arm.c (symbol_preemptible): New function.
961 (relax_branch): Use it.
963 2013-06-17 Catherine Moore <clm@codesourcery.com>
964 Maciej W. Rozycki <macro@codesourcery.com>
965 Chao-Ying Fu <fu@mips.com>
967 * config/tc-mips.c (mips_set_options): Add ase_eva.
968 (mips_set_options mips_opts): Add ase_eva.
969 (file_ase_eva): Declare.
970 (ISA_SUPPORTS_EVA_ASE): Define.
971 (IS_SEXT_9BIT_NUM): Define.
972 (MIPS_CPU_ASE_EVA): Define.
973 (is_opcode_valid): Add support for ase_eva.
974 (macro_build): Likewise.
976 (validate_mips_insn): Likewise.
977 (validate_micromips_insn): Likewise.
979 (options): Add OPTION_EVA and OPTION_NO_EVA.
980 (md_longopts): Add -meva and -mno-eva.
981 (md_parse_option): Process new options.
982 (mips_after_parse_args): Check for valid EVA combinations.
983 (s_mipsset): Likewise.
985 2013-06-14 Richard Sandiford <rsandifo@linux.vnet.ibm.com>
987 * dwarf2dbg.h (dwarf2_move_insn): Declare.
988 * dwarf2dbg.c (line_subseg): Add pmove_tail.
989 (get_line_subseg): Add create_p argument. Initialize pmove_tail.
990 (dwarf2_gen_line_info_1): Update call accordingly.
991 (dwarf2_move_insn): New function.
992 * config/tc-mips.c (append_insn): Use dwarf2_move_insn.
994 2013-06-14 Richard Sandiford <rsandifo@linux.vnet.ibm.com>
998 2011-09-05 Richard Sandiford <rdsandiford@googlemail.com>
1001 * dwarf2dbg.c (pending_lines, pending_lines_tail): New variables.
1002 (dwarf2_gen_line_info_1): Delete.
1003 (dwarf2_push_line, dwarf2_flush_pending_lines): New functions.
1004 (dwarf2_gen_line_info, dwarf2_emit_label): Use them.
1005 (dwarf2_consume_line_info): Call dwarf2_flush_pending_lines.
1006 (dwarf2_directive_loc): Push previous .locs instead of generating
1009 2013-06-13 Chao-ying Fu <Chao-ying.Fu@imgtec.com>
1011 * config/tc-mips.c (ISA_SUPPORTS_VIRT_ASE): Support micromips.
1012 (ISA_SUPPORTS_VIRT64_ASE): Support 64-bit micromips.
1014 2013-06-13 Nick Clifton <nickc@redhat.com>
1017 * config/tc-m68k.h (TC_CHECK_ADJUSTED_BROKEN_DOT_WORD): Define.
1018 * config/tc-m68k.c (tc_m68k_check_adjusted_broken_word): New
1019 function. Generates an error if the adjusted offset is out of a
1022 2013-06-12 Sandra Loosemore <sandra@codesourcery.com>
1024 * config/tc-nios2.c (md_apply_fix): Mask constant
1025 BFD_RELOC_NIOS2_HIADJ16 value to 16 bits.
1027 2013-06-10 Maciej W. Rozycki <macro@codesourcery.com>
1029 * config/tc-mips.c (append_insn): Don't do branch relaxation for
1030 MIPS-3D instructions either.
1031 (md_convert_frag): Update the COPx branch mask accordingly.
1033 * config/tc-mips.c (md_show_usage): Document --[no-]relax-branch
1035 * doc/as.texinfo (Overview): Add --relax-branch and
1037 * doc/c-mips.texi (MIPS Opts): Document --relax-branch and
1040 2013-06-09 Sandra Loosemore <sandra@codesourcery.com>
1042 * config/tc-nios2.c (nios2_parse_args): Allow trap argument to
1045 2013-06-08 Catherine Moore <clm@codesourcery.com>
1047 * config/tc-mips.c (is_opcode_valid): Build ASE mask.
1048 (is_opcode_valid_16): Pass ase value to opcode_is_member.
1049 (append_insn): Change INSN_xxxx to ASE_xxxx.
1051 2013-06-01 George Thomas <george.thomas@atmel.com>
1053 * gas/config/tc-avr.c: Change ISA for devices with USB support to
1056 2013-05-31 H.J. Lu <hongjiu.lu@intel.com>
1058 * config/tc-i386.c (md_begin): Don't align text/data/bss sections
1061 2013-05-31 Paul Brook <paul@codesourcery.com>
1063 * config/tc-mips.c (s_ehword): New.
1065 2013-05-30 Paul Brook <paul@codesourcery.com>
1067 * config/tc-mips.c (md_apply_fix): Support BFD_RELOC_MIPS_EH.
1069 2013-05-29 Maciej W. Rozycki <macro@codesourcery.com>
1071 * write.c (resolve_reloc_expr_symbols): On REL targets don't
1072 convert relocs who have no relocatable field either. Rephrase
1073 the conditional so that the PC-relative check is only applied
1076 2013-05-28 Chao-ying Fu <Chao-ying.Fu@imgtec.com>
1078 * config/tc-mips.c (macro) <ld>: Don't use $zero for address
1081 2013-05-28 Yufeng Zhang <yufeng.zhang@arm.com>
1083 * config/tc-aarch64.c (reloc_table): Update to use
1084 BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE21 instead of
1085 BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE.
1086 (md_apply_fix): Likewise.
1087 (aarch64_force_relocation): Likewise.
1089 2013-05-28 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
1091 * config/tc-arm.c (it_fsm_post_encode): Improve
1092 warning messages about deprecated IT block formats.
1094 2013-05-28 Marcus Shawcroft <marcus.shawcroft@arm.com>
1096 * config/tc-aarch64.c (md_apply_fix): Move value range checking
1097 inside fx_done condition.
1099 2013-05-22 Jürgen Urban <JuergenUrban@gmx.de>
1101 * config/tc-mips.c (macro): Handle M_LQC2_AB and M_SQC2_AB.
1103 2013-05-20 Peter Bergner <bergner@vnet.ibm.com>
1105 * config/tc-ppc.c (ppc_setup_opcodes): Use new_seg to fix error
1106 and clean up warning when using PRINT_OPCODE_TABLE.
1108 2013-05-20 Alan Modra <amodra@gmail.com>
1110 * config/tc-ppc.c (md_apply_fix): Hoist code common to insn
1111 and data fixups performing shift/high adjust/sign extension on
1112 fieldval. Sink fx_pcrel handling and checks. Use fixP->fx_size
1113 when writing data fixups rather than recalculating size.
1115 2013-05-16 Jan-Benedict Glaw <jbglaw@lug-owl.de>
1117 * doc/c-msp430.texi: Fix typo.
1119 2013-05-16 Tristan Gingold <gingold@adacore.com>
1121 * config/tc-ppc.c (ppc_is_toc_sym): Symbols of class XMC_TC
1122 are also TOC symbols.
1124 2013-05-16 Nick Clifton <nickc@redhat.com>
1126 * config/tc-msp430.c: Make -mmcu recognise more part numbers.
1127 Add -mcpu command to specify core type.
1128 * doc/c-msp430.texi: Update documentation.
1130 2013-05-09 Andrew Pinski <apinski@cavium.com>
1132 * config/tc-mips.c (struct mips_set_options): New ase_virt field.
1133 (mips_opts): Update for the new field.
1134 (file_ase_virt): New variable.
1135 (ISA_SUPPORTS_VIRT_ASE): New macro.
1136 (ISA_SUPPORTS_VIRT64_ASE): New macro.
1137 (MIPS_CPU_ASE_VIRT): New define.
1138 (is_opcode_valid): Handle ase_virt.
1139 (macro_build): Handle "+J".
1140 (validate_mips_insn): Likewise.
1141 (mips_ip): Likewise.
1142 (enum options): Add OPTION_VIRT and OPTION_NO_VIRT.
1143 (md_longopts): Add mvirt and mnovirt
1144 (md_parse_option): Handle OPTION_VIRT and OPTION_NO_VIRT.
1145 (mips_after_parse_args): Handle ase_virt field.
1146 (s_mipsset): Handle "virt" and "novirt".
1147 (mips_elf_final_processing): Add a comment about virt ASE might need
1149 (md_show_usage): Print out the usage of -mvirt and mno-virt options.
1150 * doc/c-mips.texi: Document -mvirt and -mno-virt.
1151 Document ".set virt" and ".set novirt".
1153 2013-05-09 Alan Modra <amodra@gmail.com>
1155 * config/tc-ppc.c (md_apply_fix): Sign extend fieldval under
1156 control of operand flag bits.
1158 2013-05-07 Alan Modra <amodra@gmail.com>
1160 * config/tc-ppc.c (PPC_VLE_SPLIT16A): Delete unused macro.
1161 (PPC_VLE_SPLIT16D, PPC_VLE_LO16A, PPC_VLE_LO16D): Likewise.
1162 (PPC_VLE_HI16A, PPC_VLE_HI16D): Likewise.
1163 (PPC_VLE_HA16A, PPC_VLE_HA16D): Likewise.
1164 (md_apply_fix): Set fx_no_overflow for assorted relocations.
1165 Shift and sign-extend fieldval for use by some VLE reloc
1166 operand->insert functions.
1168 2013-05-06 Paul Brook <paul@codesourcery.com>
1169 Catherine Moore <clm@codesourcery.com>
1171 * config/tc-mips.c (md_pcrel_from): Handle BFD_RELOC_32_PCREL.
1172 (limited_pcrel_reloc_p): Likewise.
1173 (md_apply_fix): Likewise.
1174 (tc_gen_reloc): Likewise.
1176 2013-05-06 Richard Sandiford <rdsandiford@googlemail.com>
1178 * config/tc-mips.c (limited_pcrel_reloc_p): New function.
1179 (mips_fix_adjustable): Adjust pc-relative check to use
1182 2013-05-02 Richard Sandiford <rdsandiford@googlemail.com>
1184 * config/tc-mips.c (mips_pseudo_table): Add stabd and stabs entries.
1185 (s_mips_stab): Do not restrict to stabn only.
1187 2013-05-02 Nick Clifton <nickc@redhat.com>
1189 * config/tc-msp430.c: Add support for the MSP430X architecture.
1190 Add code to insert a NOP instruction after any instruction that
1191 might change the interrupt state.
1192 Add support for the LARGE memory model.
1193 Add code to initialise the .MSP430.attributes section.
1194 * config/tc-msp430.h: Add support for the MSP430X architecture.
1195 * doc/c-msp430.texi: Document the new -mL and -mN command line
1197 * NEWS: Mention support for the MSP430X architecture.
1199 2013-05-01 Maciej W. Rozycki <macro@codesourcery.com>
1201 * configure.tgt: Replace alpha*-*-linuxecoff* pattern with
1202 alpha*-*-linux*ecoff*.
1204 2013-04-30 Chao-ying Fu <Chao-ying.Fu@imgtec.com>
1206 * config/tc-mips.c (mips_ip): Add sizelo.
1207 For "+C", "+G", and "+H", set sizelo and compare against it.
1209 2013-04-29 Nick Clifton <nickc@redhat.com>
1211 * as.c (Options): Add -gdwarf-sections.
1212 (parse_args): Likewise.
1213 * as.h (flag_dwarf_sections): Declare.
1214 * dwarf2dbg.c (emit_fixed_inc_line_addr): Skip section changes.
1215 (process_entries): When -gdwarf-sections is enabled generate
1216 fragmentary .debug_line sections.
1217 (out_debug_line): Set the section for the .debug_line section end
1219 * doc/as.texinfo: Document -gdwarf-sections.
1220 * NEWS: Mention -gdwarf-sections.
1222 2013-04-26 Christian Groessler <chris@groessler.org>
1224 * config/tc-z8k.c (md_parse_option): Set z8k_target_from_cmdline
1225 according to the target parameter. Don't call s_segm since s_segm
1226 calls bfd_set_arch_mach using stdoutput, but stdoutput isn't
1228 (md_begin): Call s_segm according to target parameter from command
1231 2013-04-25 Alan Modra <amodra@gmail.com>
1233 * configure.in: Allow little-endian linux.
1234 * configure: Regenerate.
1236 2013-04-24 Sandra Loosemore <sandra@codesourcery.com>
1238 * config/tc-nios2.c (nios2_control_register_arg_p): Rename
1239 "fstatus" control register to "eccinj".
1241 2013-04-19 Kai Tietz <ktietz@redhat.com>
1243 * configure.tgt (i386-*-cygwin): Handle x86_64 cygwin.
1245 2013-04-15 Julian Brown <julian@codesourcery.com>
1247 * expr.c (add_to_result, subtract_from_result): Make global.
1248 * expr.h (add_to_result, subtract_from_result): Add prototypes.
1249 * config/tc-sh.c (sh_optimize_expr): Use add_to_result,
1250 subtract_from_result to handle extra bit of precision for .sleb128
1253 2013-04-10 Julian Brown <julian@codesourcery.com>
1255 * read.c (convert_to_bignum): Add sign parameter. Use it
1256 instead of X_unsigned to determine sign of resulting bignum.
1257 (emit_expr): Pass extra argument to convert_to_bignum.
1258 (emit_leb128_expr): Use X_extrabit instead of X_unsigned. Pass
1259 X_extrabit to convert_to_bignum.
1260 (parse_bitfield_cons): Set X_extrabit.
1261 * expr.c (make_expr_symbol, expr_build_uconstant, operand):
1262 Initialise X_extrabit field as appropriate.
1263 (add_to_result): New.
1264 (subtract_from_result): New.
1266 * expr.h (expressionS): Add X_extrabit field.
1268 2013-04-10 Jan Beulich <jbeulich@suse.com>
1270 * gas/config/tc-arm.c (encode_arm_addr_mode_3): Only reject base
1271 register being PC when is_t or writeback, and use distinct
1272 diagnostic for the latter case.
1274 2013-04-10 Jan Beulich <jbeulich@suse.com>
1276 * gas/config/tc-arm.c (parse_operands): Re-write
1277 po_barrier_or_imm().
1278 (do_barrier): Remove bogus constraint().
1279 (do_t_barrier): Remove.
1281 2013-04-09 Joerg Wunsch <joerg.wunsch@atmel.com>
1283 * gas/config/tc-avr.c (mcu_types): Add ATmega64RFR2,
1284 ATmega644RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega256RFR2,
1286 * gas/doc/c-avr.texi (-mmcu documentation): Likewise.
1288 2013-04-09 Jan Beulich <jbeulich@suse.com>
1290 * gas/config/tc-arm.c (do_vmrs): Accept all control registers.
1291 Use local variable Rt in more places.
1292 (do_vmsr): Accept all control registers.
1294 2013-04-09 Jan Beulich <jbeulich@suse.com>
1296 * gas/config/tc-arm.c (do_neon_mov): Fake an instruction suffix
1297 if there was none specified for moves between scalar and core
1300 2013-04-09 Jan Beulich <jbeulich@suse.com>
1302 * gas/config/tc-arm.c (do_neon_ldx_stx): Reject VSTn in the
1303 NEON_ALL_LANES case.
1305 2013-04-08 Jan Beulich <jbeulich@suse.com>
1307 * gas/config/tc-arm.c (do_neon_ldr_str): Correct disgnostics for
1310 2013-04-08 Jan Beulich <jbeulich@suse.com>
1312 * gas/config/tc-arm.c (reg_names): Convert duplicate SP_fiq
1315 2013-04-03 Alan Modra <amodra@gmail.com>
1317 * doc/as.texinfo: Add support to generate man options for h8300.
1318 * doc/c-h8300.texi: Likewise.
1320 2013-03-28 Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>
1322 * config/tc-arm.c (arm_cpus): Add support for Cortex-A53 and
1325 2013-03-27 Alexis Deruelle <alexis.deruelle@gmail.com>
1328 * config/tc-tic6x.c (tic6x_try_encode): Add use of bitfields array.
1330 2013-03-26 Nick Clifton <nickc@redhat.com>
1333 * listing.c (rebuffer_line): Rewrite to avoid seeking back to the
1334 start of the file each time.
1337 * config/tc-sparc.h (ELF_TARGET_FORMAT): Set to elf32-sparc for
1340 2013-03-26 Douglas B Rupp <rupp@gnat.com>
1342 * config/tc-ia64.c (emit_one_bundle): Move last_slot adjustment
1345 2013-03-21 Will Newton <will.newton@linaro.org>
1347 * config/tc-arm.c (encode_thumb32_addr_mode): Emit an error for all
1348 pc-relative str instructions in Thumb mode.
1350 2013-03-21 Michael Schewe <michael.schewe@gmx.net>
1352 * config/tc-h8300.c (do_a_fix_imm): Add relaxation of mov
1353 @(disp:32,ERx) to mov @(disp:16,ERx) insns by new reloc
1355 * config/tc-h8300.h: Remove duplicated defines.
1357 2013-03-21 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
1360 * tc-avr.c (mcu_has_3_byte_pc): New function.
1361 (tc_cfi_frame_initial_instructions): Call it to find return
1364 2013-03-20 Alexis Deruelle <alexis.deruelle@gmail.com>
1367 * config/tc-tic6x.c (tic6x_try_encode): Handle
1368 tic6x_coding_dreg_(msb|lsb) field coding types and use it to
1369 encode register pair numbers when required.
1371 2013-03-15 Will Newton <will.newton@linaro.org>
1373 * config/tc-arm.c (do_neon_ldr_str): Fix error check for PC register
1374 in vstr in Thumb mode for pre-ARMv7 cores.
1376 2013-03-14 Andreas Schwab <schwab@suse.de>
1378 * doc/c-arc.texi (ARC Directives): Revert last change and use
1379 @itemize instead of @table.
1380 * doc/c-arm.texi (ARM-Instruction-Set): Likewise.
1382 2013-03-14 Nick Clifton <nickc@redhat.com>
1385 * config/tc-arm.c (do_co_reg): Do not call check_obsolete with a
1386 NULL message, instead just check ARM_CPU_IS_ANY directly.
1388 2013-03-14 Nick Clifton <nickc@redhat.com>
1391 * doc/c-arc.texi (ARC Directives): Use @code instead of @bullet
1393 * doc/c-arm.texi (ARM-Instruction-Set): Likewise. Also add text
1394 to the @item directives.
1395 (ARM-Neon-Alignment): Move to correct place in the document.
1396 * doc/c-cr16.texi (CR16 Operand Qualifiers): Fix up table
1398 * doc/c-tic54x.texi (TIC54X-Subsyms): Correct use of
1401 2013-03-12 Sebastian Huber <sebastian.huber@embedded-brains.de>
1403 * config/tc-nios2.c (nios2_consume_arg): Delete 'k' case. Add 'o'
1404 case. Add default BAD_CASE to switch.
1406 2013-03-11 Sebastian Huber <sebastian.huber@embedded-brains.de>
1408 * config/tc-nios2.c (nios2_assemble_args_ds): New function.
1409 (nios2_arg_info_structs): Add "d,s" and "d,s,E" entries.
1411 2013-03-11 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
1413 * config/tc-arm.c (crc_ext_armv8): New feature set.
1414 (UNPRED_REG): New macro.
1415 (do_crc32_1): New function.
1416 (do_crc32b, do_crc32h, do_crc32w, do_crc32cb,
1417 do_crc32ch, do_crc32cw): Likewise.
1419 (insns): Add entries for crc32 mnemonics.
1420 (arm_extensions): Add entry for crc.
1422 2013-03-08 Chung-Lin Tang <cltang@codesourcery.com>
1424 * write.h (struct fix): Add fx_dot_frag field.
1425 (dot_frag): Declare.
1426 * write.c (dot_frag): New variable.
1427 (fix_new_internal): Set fx_dot_frag field with dot_frag.
1428 (fixup_segment): Base calculation of fx_offset with fx_dot_frag.
1429 * expr.c (expr): Save value of frag_now in dot_frag when setting
1431 * read.c (emit_expr): Likewise. Delete comments.
1433 2013-03-07 H.J. Lu <hongjiu.lu@intel.com>
1435 * config/tc-i386.c (flag_code_names): Removed.
1436 (i386_index_check): Rewrote.
1438 2013-03-05 Yufeng Zhang <yufeng.zhang@arm.com>
1440 * config/tc-aarch64.c (aarch64_imm_float_p): Rename 'e' to 'pattern';
1442 (aarch64_double_precision_fmovable): New function.
1443 (parse_aarch64_imm_float): Add parameter 'dp_p'; call the new
1444 function; handle hexadecimal representation of IEEE754 encoding.
1445 (parse_operands): Update the call to parse_aarch64_imm_float.
1447 2013-02-28 H.J. Lu <hongjiu.lu@intel.com>
1449 * config/tc-i386.c (_i386_insn): Replace have_hle with hle_prefix.
1450 (check_hle): Updated.
1451 (md_assemble): Likewise.
1452 (parse_insn): Likewise.
1454 2013-02-28 H.J. Lu <hongjiu.lu@intel.com>
1456 * config/tc-i386.c (_i386_insn): Add rep_prefix.
1457 (md_assemble): Check if REP prefix is OK.
1458 (parse_insn): Remove expecting_string_instruction. Set
1461 2013-02-28 Yufeng Zhang <yufeng.zhang@arm.com>
1463 * config/tc-aarch64.c (aarch64_features): Add the 'crc' option.
1465 2013-02-28 Yufeng Zhang <yufeng.zhang@arm.com>
1467 * config/tc-aarch64.c (parse_sys_reg): Allow the full range of CRn
1468 for system registers.
1470 2013-02-27 DJ Delorie <dj@redhat.com>
1472 * config/tc-rl78.c (reloc_function): Add %code -> BFD_RELOC_RL78_CODE.
1473 (rl78_op): Handle %code().
1474 (rl78_cons_fix_new): Likewise, but ignore for 20-bit operands.
1475 (tc_gen_reloc): Likwise; convert to a computed reloc.
1476 (md_apply_fix): Likewise.
1478 2013-02-25 Kaushik Phatak <Kaushik.Phatak@kpitcummins.com>
1480 * config/rl78-parse.y: Fix encoding of DIVWU insn.
1482 2013-02-25 Terry Guo <terry.guo@arm.com>
1484 * config/tc-arm.c (arm_cpus): Add cortex-r7 entry.
1485 * doc/c-arm.texi: Add cortex-r7 and missing cortex-r5 to
1486 list of accepted CPUs.
1488 2013-02-19 H.J. Lu <hongjiu.lu@intel.com>
1491 * config/tc-i386.c (cpu_arch): Add ".smap".
1493 * doc/c-i386.texi: Document smap.
1495 2013-02-18 Maciej W. Rozycki <macro@codesourcery.com>
1497 * config/tc-mips.c (s_cpload): Call mips_mark_labels and set
1498 mips_assembling_insn appropriately.
1499 (s_cpsetup, s_cprestore, s_cpreturn, s_cpadd): Likewise.
1501 2013-02-18 Maciej W. Rozycki <macro@codesourcery.com>
1503 * config/tc-mips.c (append_insn): Correct indentation, remove
1506 2013-02-15 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
1508 * config/tc-arm.c (do_neon_mov): Break on NS_NULL.
1510 2013-02-15 Sebastian Huber <sebastian.huber@embedded-brains.de>
1512 * configure.tgt: Add nios2-*-rtems*.
1514 2013-02-14 Yufeng Zhang <yufeng.zhang@arm.com>
1516 * config/tc-aarch64.c (md_begin): Change to check if 'name' is
1519 2013-02-09 Jürgen Urban <JuergenUrban@gmx.de>
1521 * config/tc-mips.c (CPU_HAS_LDC1_SDC1): New macro.
1522 (macro): Use it. Assert that trunc.w.s is not used for r5900.
1524 2013-02-08 Yi-Hsiu, Hsu <ahsu@marvell.com>
1526 * gas/config/tc-arm.c (arm_cpus): Add support for mcpu=marvell-pj4
1529 2013-02-06 Sandra Loosemore <sandra@codesourcery.com>
1530 Andrew Jenner <andrew@codesourcery.com>
1532 Based on patches from Altera Corporation.
1534 * Makefile.am (TARGET_CPU_CFILES): Add config/tc-nios2.c.
1535 (TARGET_CPU_HFILES): Add config/tc-nios2.h.
1536 * Makefile.in: Regenerated.
1537 * configure.tgt: Add case for nios2*-linux*.
1538 * config/obj-elf.c: Conditionally include elf/nios2.h.
1539 * config/tc-nios2.c: New file.
1540 * config/tc-nios2.h: New file.
1541 * doc/Makefile.am (CPU_DOCS): Add c-nios2.texi.
1542 * doc/Makefile.in: Regenerated.
1543 * doc/all.texi: Set NIOSII.
1544 * doc/as.texinfo (Overview): Add Nios II options.
1545 (Machine Dependencies): Include c-nios2.texi.
1546 * doc/c-nios2.texi: New file.
1547 * NEWS: Note Altera Nios II support.
1549 2013-02-06 Alan Modra <amodra@gmail.com>
1552 * config/tc-avr.h (TC_VALIDATE_FIX): Mark symbol used by reloc.
1553 Don't skip fixups with fx_subsy non-NULL.
1554 * config/tc-avr.c (tc_gen_reloc): Don't specially handle fixups
1555 with fx_subsy non-NULL.
1557 2013-02-04 H.J. Lu <hongjiu.lu@intel.com>
1559 * doc/c-metag.texi: Add "@c man" markers.
1561 2013-02-04 Alan Modra <amodra@gmail.com>
1563 * write.c (fixup_segment): Return void. Delete seg_reloc_count
1565 (TC_ADJUST_RELOC_COUNT): Delete.
1566 * config/tc-i960.h (TC_ADJUST_RELOC_COUNT): Delete.
1568 2013-02-04 Alan Modra <amodra@gmail.com>
1570 * po/POTFILES.in: Regenerate.
1572 2013-01-30 Markos Chandras <markos.chandras@imgtec.com>
1574 * config/tc-metag.c: Make SWAP instruction less permissive with
1577 2013-01-29 DJ Delorie <dj@redhat.com>
1579 * config/tc-rl78.c (rl78_cons_fix_new): Handle user-specified
1580 relocs in .word/.etc statements.
1582 2013-01-29 Roland McGrath <mcgrathr@google.com>
1584 * config/tc-arm.c (md_apply_fix): Use as_bad_where for "bad
1585 immediate value for 8-bit offset" error so it shows line info.
1587 2013-01-24 Joseph Myers <joseph@codesourcery.com>
1589 * config/tc-ppc.c (md_assemble): Do not generate APUinfo sections
1592 2013-01-24 Nick Clifton <nickc@redhat.com>
1594 * config/tc-v850.c: Add support for e3v5 architecture.
1595 * doc/c-v850.texi: Mention new support.
1597 2013-01-23 Nick Clifton <nickc@redhat.com>
1600 * config/tc-avr.c: Include dwarf2dbg.h.
1602 2013-01-18 H.J. Lu <hongjiu.lu@intel.com>
1604 * config/tc-i386.c (reloc): Support size relocation only for ELF.
1605 (tc_i386_fix_adjustable): Likewise.
1606 (lex_got): Likewise.
1607 (tc_gen_reloc): Likewise.
1609 2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
1611 * config/tc-aarch64.c (output_operand_error_record): Change to output
1612 the out-of-range error message as value-expected message if there is
1613 only one single value in the expected range.
1614 (programmer_friendly_fixup): Remove the handling of 8-bit MOVI with
1615 LSL #0 as a programmer-friendly feature.
1617 2013-01-16 H.J. Lu <hongjiu.lu@intel.com>
1619 * config/tc-i386.c (reloc): Support BFD_RELOC_SIZE32.
1620 (tc_i386_fix_adjustable): Keep symbol for BFD_RELOC_32_SIZE and
1621 BFD_RELOC_64_SIZE relocations.
1622 (lex_got): Support "symbol@SIZE" and don't create GOT symbol
1624 (tc_gen_reloc): Resolve BFD_RELOC_SIZE32 and BFD_RELOC_SIZE64
1625 relocations against local symbols.
1627 2013-01-16 Alan Modra <amodra@gmail.com>
1629 * config/tc-ppc.c (md_assemble <TE_PE>): Ignore line after
1630 finding some sort of toc syntax error, and break to avoid
1631 compiler uninit warning.
1633 2013-01-15 H.J. Lu <hongjiu.lu@intel.com>
1636 * config/tc-i386.c (lex_got): Increment length by 1 if the
1637 relocation token is removed.
1639 2013-01-15 Nick Clifton <nickc@redhat.com>
1641 * config/tc-v850.c (md_assemble): Allow signed values for
1644 2013-01-11 Sean Keys <skeys@ipdatasys.com>
1646 * config/tc-xgate.c (md_begin): Fix mistake made when going from
1649 2013-01-10 Peter Bergner <bergner@vnet.ibm.com>
1651 * doc/as.texinfo (Target PowerPC): Document -mpower8 and -mhtm.
1652 * doc/c-ppc.texi (PowerPC-Opts): Likewise.
1653 * config/tc-ppc.c (md_show_usage): Likewise.
1654 (ppc_handle_align): Handle power8's group ending nop.
1656 2013-01-10 Sean Keys <skeys@ipdatasys.com>
1658 * config/tc-xgate.c (md_begin): Fix the printing of opcodes so
1659 that the assember exits after the opcodes have been printed.
1661 2013-01-10 H.J. Lu <hongjiu.lu@intel.com>
1663 * app.c: Remove trailing white spaces.
1667 * dw2gencfi.c: Likewise.
1668 * dwarf2dbg.h: Likewise.
1669 * ecoff.c: Likewise.
1670 * input-file.c: Likewise.
1671 * itbl-lex.h: Likewise.
1672 * output-file.c: Likewise.
1675 * subsegs.c: Likewise.
1676 * symbols.c: Likewise.
1677 * write.c: Likewise.
1678 * config/tc-i386.c: Likewise.
1679 * doc/Makefile.am: Likewise.
1680 * doc/Makefile.in: Likewise.
1681 * doc/c-aarch64.texi: Likewise.
1682 * doc/c-alpha.texi: Likewise.
1683 * doc/c-arc.texi: Likewise.
1684 * doc/c-arm.texi: Likewise.
1685 * doc/c-avr.texi: Likewise.
1686 * doc/c-bfin.texi: Likewise.
1687 * doc/c-cr16.texi: Likewise.
1688 * doc/c-d10v.texi: Likewise.
1689 * doc/c-d30v.texi: Likewise.
1690 * doc/c-h8300.texi: Likewise.
1691 * doc/c-hppa.texi: Likewise.
1692 * doc/c-i370.texi: Likewise.
1693 * doc/c-i386.texi: Likewise.
1694 * doc/c-i860.texi: Likewise.
1695 * doc/c-m32c.texi: Likewise.
1696 * doc/c-m32r.texi: Likewise.
1697 * doc/c-m68hc11.texi: Likewise.
1698 * doc/c-m68k.texi: Likewise.
1699 * doc/c-microblaze.texi: Likewise.
1700 * doc/c-mips.texi: Likewise.
1701 * doc/c-msp430.texi: Likewise.
1702 * doc/c-mt.texi: Likewise.
1703 * doc/c-s390.texi: Likewise.
1704 * doc/c-score.texi: Likewise.
1705 * doc/c-sh.texi: Likewise.
1706 * doc/c-sh64.texi: Likewise.
1707 * doc/c-tic54x.texi: Likewise.
1708 * doc/c-tic6x.texi: Likewise.
1709 * doc/c-v850.texi: Likewise.
1710 * doc/c-xc16x.texi: Likewise.
1711 * doc/c-xgate.texi: Likewise.
1712 * doc/c-xtensa.texi: Likewise.
1713 * doc/c-z80.texi: Likewise.
1714 * doc/internals.texi: Likewise.
1716 2013-01-10 Roland McGrath <mcgrathr@google.com>
1718 * hash.c (hash_new_sized): Make it global.
1719 * hash.h: Declare it.
1720 * macro.c (define_macro): Use hash_new_sized instead of hash_new,
1723 2013-01-10 Will Newton <will.newton@imgtec.com>
1725 * Makefile.am: Add Meta.
1726 * Makefile.in: Regenerate.
1727 * config/tc-metag.c: New file.
1728 * config/tc-metag.h: New file.
1729 * configure.tgt: Add Meta.
1730 * doc/Makefile.am: Add Meta.
1731 * doc/Makefile.in: Regenerate.
1732 * doc/all.texi: Add Meta.
1733 * doc/as.texiinfo: Document Meta options.
1734 * doc/c-metag.texi: New file.
1736 2013-01-09 Steve Ellcey <sellcey@mips.com>
1738 * config/tc-i386.c (md_begin): Remove 'internal Error' from as_fatal
1740 * config/tc-mips.c (internalError): Remove, replace with abort.
1742 2013-01-08 Yufeng Zhang <yufeng.zhang@arm.com>
1744 * config/tc-aarch64.c (parse_operands): Change to compare the result
1745 of function call 'parse_sys_reg' with 'PARSE_FAIL' instead of 'FALSE'.
1747 2013-01-07 Nick Clifton <nickc@redhat.com>
1750 * config/tc-arm.c (skip_past_char): Skip whitespace before the
1751 anticipated character.
1752 * config/tc-arm.c (parse_address_main): Delete skip of whitespace
1753 here as it is no longer needed.
1755 2013-01-06 Andreas Schwab <schwab@linux-m68k.org>
1757 * doc/c-mips.texi (MIPS Opts): Fix use of @itemx.
1758 * doc/c-score.texi (SCORE-Opts): Likewise.
1759 * doc/c-tic54x.texi (TIC54X-Directives): Likewise.
1761 2013-01-04 Juergen Urban <JuergenUrban@gmx.de>
1763 * config/tc-mips.c: Add support for MIPS r5900.
1764 Add M_LQ_AB and M_SQ_AB to support large values for instructions
1766 (can_swap_branch_p, get_append_method): Detect some conditional
1767 short loops to fix a bug on the r5900 by NOP in the branch delay
1769 (M_MUL): Support 3 operands in multu on r5900.
1770 (M_TRUNCWS): Support trunc.w.s on r5900 in MIPS ISA I.
1771 (s_mipsset): Force 32 bit floating point on r5900.
1772 (mips_ip): Check parameter range of instructions mfps and mtps on
1774 * configure.in: Detect CPU type when target string contains r5900
1775 (e.g. mips64r5900el-linux-gnu).
1777 2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
1779 * as.c (parse_args): Update copyright year to 2013.
1781 2013-01-02 Yufeng Zhang <yufeng.zhang@arm.com>
1783 * config/tc-aarch64.c (aarch64_cpus): Add entries for "cortex-a53"
1786 2013-01-02 Nick Clifton <nickc@redhat.com>
1789 * config/tc-arm.c (parse_address_main): Skip whitespace before a
1792 For older changes see ChangeLog-2012
1794 Copyright (C) 2013 Free Software Foundation, Inc.
1796 Copying and distribution of this file, with or without modification,
1797 are permitted in any medium without royalty provided the copyright
1798 notice and this notice are preserved.
1804 version-control: never