1 2013-06-13 Chao-ying Fu <Chao-ying.Fu@imgtec.com>
3 * config/tc-mips.c (ISA_SUPPORTS_VIRT_ASE): Support micromips.
4 (ISA_SUPPORTS_VIRT64_ASE): Support 64-bit micromips.
6 2013-06-13 Nick Clifton <nickc@redhat.com>
9 * config/tc-m68k.h (TC_CHECK_ADJUSTED_BROKEN_DOT_WORD): Define.
10 * config/tc-m68k.c (tc_m68k_check_adjusted_broken_word): New
11 function. Generates an error if the adjusted offset is out of a
14 2013-06-12 Sandra Loosemore <sandra@codesourcery.com>
16 * config/tc-nios2.c (md_apply_fix): Mask constant
17 BFD_RELOC_NIOS2_HIADJ16 value to 16 bits.
19 2013-06-10 Maciej W. Rozycki <macro@codesourcery.com>
21 * config/tc-mips.c (append_insn): Don't do branch relaxation for
22 MIPS-3D instructions either.
23 (md_convert_frag): Update the COPx branch mask accordingly.
25 * config/tc-mips.c (md_show_usage): Document --[no-]relax-branch
27 * doc/as.texinfo (Overview): Add --relax-branch and
29 * doc/c-mips.texi (MIPS Opts): Document --relax-branch and
32 2013-06-09 Sandra Loosemore <sandra@codesourcery.com>
34 * config/tc-nios2.c (nios2_parse_args): Allow trap argument to
37 2013-06-08 Catherine Moore <clm@codesourcery.com>
39 * config/tc-mips.c (is_opcode_valid): Build ASE mask.
40 (is_opcode_valid_16): Pass ase value to opcode_is_member.
41 (append_insn): Change INSN_xxxx to ASE_xxxx.
43 2013-06-01 George Thomas <george.thomas@atmel.com>
45 * gas/config/tc-avr.c: Change ISA for devices with USB support to
48 2013-05-31 H.J. Lu <hongjiu.lu@intel.com>
50 * config/tc-i386.c (md_begin): Don't align text/data/bss sections
53 2013-05-31 Paul Brook <paul@codesourcery.com>
56 * config/tc-mips.c (s_ehword): New.
58 2013-05-30 Paul Brook <paul@codesourcery.com>
60 * config/tc-mips.c (md_apply_fix): Support BFD_RELOC_MIPS_EH.
62 2013-05-29 Maciej W. Rozycki <macro@codesourcery.com>
64 * write.c (resolve_reloc_expr_symbols): On REL targets don't
65 convert relocs who have no relocatable field either. Rephrase
66 the conditional so that the PC-relative check is only applied
69 2013-05-28 Chao-ying Fu <Chao-ying.Fu@imgtec.com>
71 * config/tc-mips.c (macro) <ld>: Don't use $zero for address
74 2013-05-28 Yufeng Zhang <yufeng.zhang@arm.com>
76 * config/tc-aarch64.c (reloc_table): Update to use
77 BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE21 instead of
78 BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE.
79 (md_apply_fix): Likewise.
80 (aarch64_force_relocation): Likewise.
82 2013-05-28 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
84 * config/tc-arm.c (it_fsm_post_encode): Improve
85 warning messages about deprecated IT block formats.
87 2013-05-28 Marcus Shawcroft <marcus.shawcroft@arm.com>
89 * config/tc-aarch64.c (md_apply_fix): Move value range checking
90 inside fx_done condition.
92 2013-05-22 Jürgen Urban <JuergenUrban@gmx.de>
94 * config/tc-mips.c (macro): Handle M_LQC2_AB and M_SQC2_AB.
96 2013-05-20 Peter Bergner <bergner@vnet.ibm.com>
98 * config/tc-ppc.c (ppc_setup_opcodes): Use new_seg to fix error
99 and clean up warning when using PRINT_OPCODE_TABLE.
101 2013-05-20 Alan Modra <amodra@gmail.com>
103 * config/tc-ppc.c (md_apply_fix): Hoist code common to insn
104 and data fixups performing shift/high adjust/sign extension on
105 fieldval. Sink fx_pcrel handling and checks. Use fixP->fx_size
106 when writing data fixups rather than recalculating size.
108 2013-05-16 Jan-Benedict Glaw <jbglaw@lug-owl.de>
110 * doc/c-msp430.texi: Fix typo.
112 2013-05-16 Tristan Gingold <gingold@adacore.com>
114 * config/tc-ppc.c (ppc_is_toc_sym): Symbols of class XMC_TC
115 are also TOC symbols.
117 2013-05-16 Nick Clifton <nickc@redhat.com>
119 * config/tc-msp430.c: Make -mmcu recognise more part numbers.
120 Add -mcpu command to specify core type.
121 * doc/c-msp430.texi: Update documentation.
123 2013-05-09 Andrew Pinski <apinski@cavium.com>
125 * config/tc-mips.c (struct mips_set_options): New ase_virt field.
126 (mips_opts): Update for the new field.
127 (file_ase_virt): New variable.
128 (ISA_SUPPORTS_VIRT_ASE): New macro.
129 (ISA_SUPPORTS_VIRT64_ASE): New macro.
130 (MIPS_CPU_ASE_VIRT): New define.
131 (is_opcode_valid): Handle ase_virt.
132 (macro_build): Handle "+J".
133 (validate_mips_insn): Likewise.
135 (enum options): Add OPTION_VIRT and OPTION_NO_VIRT.
136 (md_longopts): Add mvirt and mnovirt
137 (md_parse_option): Handle OPTION_VIRT and OPTION_NO_VIRT.
138 (mips_after_parse_args): Handle ase_virt field.
139 (s_mipsset): Handle "virt" and "novirt".
140 (mips_elf_final_processing): Add a comment about virt ASE might need
142 (md_show_usage): Print out the usage of -mvirt and mno-virt options.
143 * doc/c-mips.texi: Document -mvirt and -mno-virt.
144 Document ".set virt" and ".set novirt".
146 2013-05-09 Alan Modra <amodra@gmail.com>
148 * config/tc-ppc.c (md_apply_fix): Sign extend fieldval under
149 control of operand flag bits.
151 2013-05-07 Alan Modra <amodra@gmail.com>
153 * config/tc-ppc.c (PPC_VLE_SPLIT16A): Delete unused macro.
154 (PPC_VLE_SPLIT16D, PPC_VLE_LO16A, PPC_VLE_LO16D): Likewise.
155 (PPC_VLE_HI16A, PPC_VLE_HI16D): Likewise.
156 (PPC_VLE_HA16A, PPC_VLE_HA16D): Likewise.
157 (md_apply_fix): Set fx_no_overflow for assorted relocations.
158 Shift and sign-extend fieldval for use by some VLE reloc
159 operand->insert functions.
161 2013-05-06 Paul Brook <paul@codesourcery.com>
162 Catherine Moore <clm@codesourcery.com>
164 * config/tc-mips.c (md_pcrel_from): Handle BFD_RELOC_32_PCREL.
165 (limited_pcrel_reloc_p): Likewise.
166 (md_apply_fix): Likewise.
167 (tc_gen_reloc): Likewise.
169 2013-05-06 Richard Sandiford <rdsandiford@googlemail.com>
171 * config/tc-mips.c (limited_pcrel_reloc_p): New function.
172 (mips_fix_adjustable): Adjust pc-relative check to use
175 2013-05-02 Richard Sandiford <rdsandiford@googlemail.com>
177 * config/tc-mips.c (mips_pseudo_table): Add stabd and stabs entries.
178 (s_mips_stab): Do not restrict to stabn only.
180 2013-05-02 Nick Clifton <nickc@redhat.com>
182 * config/tc-msp430.c: Add support for the MSP430X architecture.
183 Add code to insert a NOP instruction after any instruction that
184 might change the interrupt state.
185 Add support for the LARGE memory model.
186 Add code to initialise the .MSP430.attributes section.
187 * config/tc-msp430.h: Add support for the MSP430X architecture.
188 * doc/c-msp430.texi: Document the new -mL and -mN command line
190 * NEWS: Mention support for the MSP430X architecture.
192 2013-05-01 Maciej W. Rozycki <macro@codesourcery.com>
194 * configure.tgt: Replace alpha*-*-linuxecoff* pattern with
195 alpha*-*-linux*ecoff*.
197 2013-04-30 Chao-ying Fu <Chao-ying.Fu@imgtec.com>
199 * config/tc-mips.c (mips_ip): Add sizelo.
200 For "+C", "+G", and "+H", set sizelo and compare against it.
202 2013-04-29 Nick Clifton <nickc@redhat.com>
204 * as.c (Options): Add -gdwarf-sections.
205 (parse_args): Likewise.
206 * as.h (flag_dwarf_sections): Declare.
207 * dwarf2dbg.c (emit_fixed_inc_line_addr): Skip section changes.
208 (process_entries): When -gdwarf-sections is enabled generate
209 fragmentary .debug_line sections.
210 (out_debug_line): Set the section for the .debug_line section end
212 * doc/as.texinfo: Document -gdwarf-sections.
213 * NEWS: Mention -gdwarf-sections.
215 2013-04-26 Christian Groessler <chris@groessler.org>
217 * config/tc-z8k.c (md_parse_option): Set z8k_target_from_cmdline
218 according to the target parameter. Don't call s_segm since s_segm
219 calls bfd_set_arch_mach using stdoutput, but stdoutput isn't
221 (md_begin): Call s_segm according to target parameter from command
224 2013-04-25 Alan Modra <amodra@gmail.com>
226 * configure.in: Allow little-endian linux.
227 * configure: Regenerate.
229 2013-04-24 Sandra Loosemore <sandra@codesourcery.com>
231 * config/tc-nios2.c (nios2_control_register_arg_p): Rename
232 "fstatus" control register to "eccinj".
234 2013-04-19 Kai Tietz <ktietz@redhat.com>
236 * configure.tgt (i386-*-cygwin): Handle x86_64 cygwin.
238 2013-04-15 Julian Brown <julian@codesourcery.com>
240 * expr.c (add_to_result, subtract_from_result): Make global.
241 * expr.h (add_to_result, subtract_from_result): Add prototypes.
242 * config/tc-sh.c (sh_optimize_expr): Use add_to_result,
243 subtract_from_result to handle extra bit of precision for .sleb128
246 2013-04-10 Julian Brown <julian@codesourcery.com>
248 * read.c (convert_to_bignum): Add sign parameter. Use it
249 instead of X_unsigned to determine sign of resulting bignum.
250 (emit_expr): Pass extra argument to convert_to_bignum.
251 (emit_leb128_expr): Use X_extrabit instead of X_unsigned. Pass
252 X_extrabit to convert_to_bignum.
253 (parse_bitfield_cons): Set X_extrabit.
254 * expr.c (make_expr_symbol, expr_build_uconstant, operand):
255 Initialise X_extrabit field as appropriate.
256 (add_to_result): New.
257 (subtract_from_result): New.
259 * expr.h (expressionS): Add X_extrabit field.
261 2013-04-10 Jan Beulich <jbeulich@suse.com>
263 * gas/config/tc-arm.c (encode_arm_addr_mode_3): Only reject base
264 register being PC when is_t or writeback, and use distinct
265 diagnostic for the latter case.
267 2013-04-10 Jan Beulich <jbeulich@suse.com>
269 * gas/config/tc-arm.c (parse_operands): Re-write
271 (do_barrier): Remove bogus constraint().
272 (do_t_barrier): Remove.
274 2013-04-09 Joerg Wunsch <joerg.wunsch@atmel.com>
276 * gas/config/tc-avr.c (mcu_types): Add ATmega64RFR2,
277 ATmega644RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega256RFR2,
279 * gas/doc/c-avr.texi (-mmcu documentation): Likewise.
281 2013-04-09 Jan Beulich <jbeulich@suse.com>
283 * gas/config/tc-arm.c (do_vmrs): Accept all control registers.
284 Use local variable Rt in more places.
285 (do_vmsr): Accept all control registers.
287 2013-04-09 Jan Beulich <jbeulich@suse.com>
289 * gas/config/tc-arm.c (do_neon_mov): Fake an instruction suffix
290 if there was none specified for moves between scalar and core
293 2013-04-09 Jan Beulich <jbeulich@suse.com>
295 * gas/config/tc-arm.c (do_neon_ldx_stx): Reject VSTn in the
298 2013-04-08 Jan Beulich <jbeulich@suse.com>
300 * gas/config/tc-arm.c (do_neon_ldr_str): Correct disgnostics for
303 2013-04-08 Jan Beulich <jbeulich@suse.com>
305 * gas/config/tc-arm.c (reg_names): Convert duplicate SP_fiq
308 2013-04-03 Alan Modra <amodra@gmail.com>
310 * doc/as.texinfo: Add support to generate man options for h8300.
311 * doc/c-h8300.texi: Likewise.
313 2013-03-28 Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>
315 * config/tc-arm.c (arm_cpus): Add support for Cortex-A53 and
318 2013-03-27 Alexis Deruelle <alexis.deruelle@gmail.com>
321 * config/tc-tic6x.c (tic6x_try_encode): Add use of bitfields array.
323 2013-03-26 Nick Clifton <nickc@redhat.com>
326 * listing.c (rebuffer_line): Rewrite to avoid seeking back to the
327 start of the file each time.
330 * config/tc-sparc.h (ELF_TARGET_FORMAT): Set to elf32-sparc for
333 2013-03-26 Douglas B Rupp <rupp@gnat.com>
335 * config/tc-ia64.c (emit_one_bundle): Move last_slot adjustment
338 2013-03-21 Will Newton <will.newton@linaro.org>
340 * config/tc-arm.c (encode_thumb32_addr_mode): Emit an error for all
341 pc-relative str instructions in Thumb mode.
343 2013-03-21 Michael Schewe <michael.schewe@gmx.net>
345 * config/tc-h8300.c (do_a_fix_imm): Add relaxation of mov
346 @(disp:32,ERx) to mov @(disp:16,ERx) insns by new reloc
348 * config/tc-h8300.h: Remove duplicated defines.
350 2013-03-21 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
353 * tc-avr.c (mcu_has_3_byte_pc): New function.
354 (tc_cfi_frame_initial_instructions): Call it to find return
357 2013-03-20 Alexis Deruelle <alexis.deruelle@gmail.com>
360 * config/tc-tic6x.c (tic6x_try_encode): Handle
361 tic6x_coding_dreg_(msb|lsb) field coding types and use it to
362 encode register pair numbers when required.
364 2013-03-15 Will Newton <will.newton@linaro.org>
366 * config/tc-arm.c (do_neon_ldr_str): Fix error check for PC register
367 in vstr in Thumb mode for pre-ARMv7 cores.
369 2013-03-14 Andreas Schwab <schwab@suse.de>
371 * doc/c-arc.texi (ARC Directives): Revert last change and use
372 @itemize instead of @table.
373 * doc/c-arm.texi (ARM-Instruction-Set): Likewise.
375 2013-03-14 Nick Clifton <nickc@redhat.com>
378 * config/tc-arm.c (do_co_reg): Do not call check_obsolete with a
379 NULL message, instead just check ARM_CPU_IS_ANY directly.
381 2013-03-14 Nick Clifton <nickc@redhat.com>
384 * doc/c-arc.texi (ARC Directives): Use @code instead of @bullet
386 * doc/c-arm.texi (ARM-Instruction-Set): Likewise. Also add text
387 to the @item directives.
388 (ARM-Neon-Alignment): Move to correct place in the document.
389 * doc/c-cr16.texi (CR16 Operand Qualifiers): Fix up table
391 * doc/c-tic54x.texi (TIC54X-Subsyms): Correct use of
394 2013-03-12 Sebastian Huber <sebastian.huber@embedded-brains.de>
396 * config/tc-nios2.c (nios2_consume_arg): Delete 'k' case. Add 'o'
397 case. Add default BAD_CASE to switch.
399 2013-03-11 Sebastian Huber <sebastian.huber@embedded-brains.de>
401 * config/tc-nios2.c (nios2_assemble_args_ds): New function.
402 (nios2_arg_info_structs): Add "d,s" and "d,s,E" entries.
404 2013-03-11 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
406 * config/tc-arm.c (crc_ext_armv8): New feature set.
407 (UNPRED_REG): New macro.
408 (do_crc32_1): New function.
409 (do_crc32b, do_crc32h, do_crc32w, do_crc32cb,
410 do_crc32ch, do_crc32cw): Likewise.
412 (insns): Add entries for crc32 mnemonics.
413 (arm_extensions): Add entry for crc.
415 2013-03-08 Chung-Lin Tang <cltang@codesourcery.com>
417 * write.h (struct fix): Add fx_dot_frag field.
419 * write.c (dot_frag): New variable.
420 (fix_new_internal): Set fx_dot_frag field with dot_frag.
421 (fixup_segment): Base calculation of fx_offset with fx_dot_frag.
422 * expr.c (expr): Save value of frag_now in dot_frag when setting
424 * read.c (emit_expr): Likewise. Delete comments.
426 2013-03-07 H.J. Lu <hongjiu.lu@intel.com>
428 * config/tc-i386.c (flag_code_names): Removed.
429 (i386_index_check): Rewrote.
431 2013-03-05 Yufeng Zhang <yufeng.zhang@arm.com>
433 * config/tc-aarch64.c (aarch64_imm_float_p): Rename 'e' to 'pattern';
435 (aarch64_double_precision_fmovable): New function.
436 (parse_aarch64_imm_float): Add parameter 'dp_p'; call the new
437 function; handle hexadecimal representation of IEEE754 encoding.
438 (parse_operands): Update the call to parse_aarch64_imm_float.
440 2013-02-28 H.J. Lu <hongjiu.lu@intel.com>
442 * config/tc-i386.c (_i386_insn): Replace have_hle with hle_prefix.
443 (check_hle): Updated.
444 (md_assemble): Likewise.
445 (parse_insn): Likewise.
447 2013-02-28 H.J. Lu <hongjiu.lu@intel.com>
449 * config/tc-i386.c (_i386_insn): Add rep_prefix.
450 (md_assemble): Check if REP prefix is OK.
451 (parse_insn): Remove expecting_string_instruction. Set
454 2013-02-28 Yufeng Zhang <yufeng.zhang@arm.com>
456 * config/tc-aarch64.c (aarch64_features): Add the 'crc' option.
458 2013-02-28 Yufeng Zhang <yufeng.zhang@arm.com>
460 * config/tc-aarch64.c (parse_sys_reg): Allow the full range of CRn
461 for system registers.
463 2013-02-27 DJ Delorie <dj@redhat.com>
465 * config/tc-rl78.c (reloc_function): Add %code -> BFD_RELOC_RL78_CODE.
466 (rl78_op): Handle %code().
467 (rl78_cons_fix_new): Likewise, but ignore for 20-bit operands.
468 (tc_gen_reloc): Likwise; convert to a computed reloc.
469 (md_apply_fix): Likewise.
471 2013-02-25 Kaushik Phatak <Kaushik.Phatak@kpitcummins.com>
473 * config/rl78-parse.y: Fix encoding of DIVWU insn.
475 2013-02-25 Terry Guo <terry.guo@arm.com>
477 * config/tc-arm.c (arm_cpus): Add cortex-r7 entry.
478 * doc/c-arm.texi: Add cortex-r7 and missing cortex-r5 to
479 list of accepted CPUs.
481 2013-02-19 H.J. Lu <hongjiu.lu@intel.com>
484 * config/tc-i386.c (cpu_arch): Add ".smap".
486 * doc/c-i386.texi: Document smap.
488 2013-02-18 Maciej W. Rozycki <macro@codesourcery.com>
490 * config/tc-mips.c (s_cpload): Call mips_mark_labels and set
491 mips_assembling_insn appropriately.
492 (s_cpsetup, s_cprestore, s_cpreturn, s_cpadd): Likewise.
494 2013-02-18 Maciej W. Rozycki <macro@codesourcery.com>
496 * config/tc-mips.c (append_insn): Correct indentation, remove
499 2013-02-15 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
501 * config/tc-arm.c (do_neon_mov): Break on NS_NULL.
503 2013-02-15 Sebastian Huber <sebastian.huber@embedded-brains.de>
505 * configure.tgt: Add nios2-*-rtems*.
507 2013-02-14 Yufeng Zhang <yufeng.zhang@arm.com>
509 * config/tc-aarch64.c (md_begin): Change to check if 'name' is
512 2013-02-09 Jürgen Urban <JuergenUrban@gmx.de>
514 * config/tc-mips.c (CPU_HAS_LDC1_SDC1): New macro.
515 (macro): Use it. Assert that trunc.w.s is not used for r5900.
517 2013-02-08 Yi-Hsiu, Hsu <ahsu@marvell.com>
519 * gas/config/tc-arm.c (arm_cpus): Add support for mcpu=marvell-pj4
522 2013-02-06 Sandra Loosemore <sandra@codesourcery.com>
523 Andrew Jenner <andrew@codesourcery.com>
525 Based on patches from Altera Corporation.
527 * Makefile.am (TARGET_CPU_CFILES): Add config/tc-nios2.c.
528 (TARGET_CPU_HFILES): Add config/tc-nios2.h.
529 * Makefile.in: Regenerated.
530 * configure.tgt: Add case for nios2*-linux*.
531 * config/obj-elf.c: Conditionally include elf/nios2.h.
532 * config/tc-nios2.c: New file.
533 * config/tc-nios2.h: New file.
534 * doc/Makefile.am (CPU_DOCS): Add c-nios2.texi.
535 * doc/Makefile.in: Regenerated.
536 * doc/all.texi: Set NIOSII.
537 * doc/as.texinfo (Overview): Add Nios II options.
538 (Machine Dependencies): Include c-nios2.texi.
539 * doc/c-nios2.texi: New file.
540 * NEWS: Note Altera Nios II support.
542 2013-02-06 Alan Modra <amodra@gmail.com>
545 * config/tc-avr.h (TC_VALIDATE_FIX): Mark symbol used by reloc.
546 Don't skip fixups with fx_subsy non-NULL.
547 * config/tc-avr.c (tc_gen_reloc): Don't specially handle fixups
548 with fx_subsy non-NULL.
550 2013-02-04 H.J. Lu <hongjiu.lu@intel.com>
552 * doc/c-metag.texi: Add "@c man" markers.
554 2013-02-04 Alan Modra <amodra@gmail.com>
556 * write.c (fixup_segment): Return void. Delete seg_reloc_count
558 (TC_ADJUST_RELOC_COUNT): Delete.
559 * config/tc-i960.h (TC_ADJUST_RELOC_COUNT): Delete.
561 2013-02-04 Alan Modra <amodra@gmail.com>
563 * po/POTFILES.in: Regenerate.
565 2013-01-30 Markos Chandras <markos.chandras@imgtec.com>
567 * config/tc-metag.c: Make SWAP instruction less permissive with
570 2013-01-29 DJ Delorie <dj@redhat.com>
572 * config/tc-rl78.c (rl78_cons_fix_new): Handle user-specified
573 relocs in .word/.etc statements.
575 2013-01-29 Roland McGrath <mcgrathr@google.com>
577 * config/tc-arm.c (md_apply_fix): Use as_bad_where for "bad
578 immediate value for 8-bit offset" error so it shows line info.
580 2013-01-24 Joseph Myers <joseph@codesourcery.com>
582 * config/tc-ppc.c (md_assemble): Do not generate APUinfo sections
585 2013-01-24 Nick Clifton <nickc@redhat.com>
587 * config/tc-v850.c: Add support for e3v5 architecture.
588 * doc/c-v850.texi: Mention new support.
590 2013-01-23 Nick Clifton <nickc@redhat.com>
593 * config/tc-avr.c: Include dwarf2dbg.h.
595 2013-01-18 H.J. Lu <hongjiu.lu@intel.com>
597 * config/tc-i386.c (reloc): Support size relocation only for ELF.
598 (tc_i386_fix_adjustable): Likewise.
600 (tc_gen_reloc): Likewise.
602 2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
604 * config/tc-aarch64.c (output_operand_error_record): Change to output
605 the out-of-range error message as value-expected message if there is
606 only one single value in the expected range.
607 (programmer_friendly_fixup): Remove the handling of 8-bit MOVI with
608 LSL #0 as a programmer-friendly feature.
610 2013-01-16 H.J. Lu <hongjiu.lu@intel.com>
612 * config/tc-i386.c (reloc): Support BFD_RELOC_SIZE32.
613 (tc_i386_fix_adjustable): Keep symbol for BFD_RELOC_32_SIZE and
614 BFD_RELOC_64_SIZE relocations.
615 (lex_got): Support "symbol@SIZE" and don't create GOT symbol
617 (tc_gen_reloc): Resolve BFD_RELOC_SIZE32 and BFD_RELOC_SIZE64
618 relocations against local symbols.
620 2013-01-16 Alan Modra <amodra@gmail.com>
622 * config/tc-ppc.c (md_assemble <TE_PE>): Ignore line after
623 finding some sort of toc syntax error, and break to avoid
624 compiler uninit warning.
626 2013-01-15 H.J. Lu <hongjiu.lu@intel.com>
629 * config/tc-i386.c (lex_got): Increment length by 1 if the
630 relocation token is removed.
632 2013-01-15 Nick Clifton <nickc@redhat.com>
634 * config/tc-v850.c (md_assemble): Allow signed values for
637 2013-01-11 Sean Keys <skeys@ipdatasys.com>
639 * config/tc-xgate.c (md_begin): Fix mistake made when going from
642 2013-01-10 Peter Bergner <bergner@vnet.ibm.com>
644 * doc/as.texinfo (Target PowerPC): Document -mpower8 and -mhtm.
645 * doc/c-ppc.texi (PowerPC-Opts): Likewise.
646 * config/tc-ppc.c (md_show_usage): Likewise.
647 (ppc_handle_align): Handle power8's group ending nop.
649 2013-01-10 Sean Keys <skeys@ipdatasys.com>
651 * config/tc-xgate.c (md_begin): Fix the printing of opcodes so
652 that the assember exits after the opcodes have been printed.
654 2013-01-10 H.J. Lu <hongjiu.lu@intel.com>
656 * app.c: Remove trailing white spaces.
660 * dw2gencfi.c: Likewise.
661 * dwarf2dbg.h: Likewise.
663 * input-file.c: Likewise.
664 * itbl-lex.h: Likewise.
665 * output-file.c: Likewise.
668 * subsegs.c: Likewise.
669 * symbols.c: Likewise.
671 * config/tc-i386.c: Likewise.
672 * doc/Makefile.am: Likewise.
673 * doc/Makefile.in: Likewise.
674 * doc/c-aarch64.texi: Likewise.
675 * doc/c-alpha.texi: Likewise.
676 * doc/c-arc.texi: Likewise.
677 * doc/c-arm.texi: Likewise.
678 * doc/c-avr.texi: Likewise.
679 * doc/c-bfin.texi: Likewise.
680 * doc/c-cr16.texi: Likewise.
681 * doc/c-d10v.texi: Likewise.
682 * doc/c-d30v.texi: Likewise.
683 * doc/c-h8300.texi: Likewise.
684 * doc/c-hppa.texi: Likewise.
685 * doc/c-i370.texi: Likewise.
686 * doc/c-i386.texi: Likewise.
687 * doc/c-i860.texi: Likewise.
688 * doc/c-m32c.texi: Likewise.
689 * doc/c-m32r.texi: Likewise.
690 * doc/c-m68hc11.texi: Likewise.
691 * doc/c-m68k.texi: Likewise.
692 * doc/c-microblaze.texi: Likewise.
693 * doc/c-mips.texi: Likewise.
694 * doc/c-msp430.texi: Likewise.
695 * doc/c-mt.texi: Likewise.
696 * doc/c-s390.texi: Likewise.
697 * doc/c-score.texi: Likewise.
698 * doc/c-sh.texi: Likewise.
699 * doc/c-sh64.texi: Likewise.
700 * doc/c-tic54x.texi: Likewise.
701 * doc/c-tic6x.texi: Likewise.
702 * doc/c-v850.texi: Likewise.
703 * doc/c-xc16x.texi: Likewise.
704 * doc/c-xgate.texi: Likewise.
705 * doc/c-xtensa.texi: Likewise.
706 * doc/c-z80.texi: Likewise.
707 * doc/internals.texi: Likewise.
709 2013-01-10 Roland McGrath <mcgrathr@google.com>
711 * hash.c (hash_new_sized): Make it global.
712 * hash.h: Declare it.
713 * macro.c (define_macro): Use hash_new_sized instead of hash_new,
716 2013-01-10 Will Newton <will.newton@imgtec.com>
718 * Makefile.am: Add Meta.
719 * Makefile.in: Regenerate.
720 * config/tc-metag.c: New file.
721 * config/tc-metag.h: New file.
722 * configure.tgt: Add Meta.
723 * doc/Makefile.am: Add Meta.
724 * doc/Makefile.in: Regenerate.
725 * doc/all.texi: Add Meta.
726 * doc/as.texiinfo: Document Meta options.
727 * doc/c-metag.texi: New file.
729 2013-01-09 Steve Ellcey <sellcey@mips.com>
731 * config/tc-i386.c (md_begin): Remove 'internal Error' from as_fatal
733 * config/tc-mips.c (internalError): Remove, replace with abort.
735 2013-01-08 Yufeng Zhang <yufeng.zhang@arm.com>
737 * config/tc-aarch64.c (parse_operands): Change to compare the result
738 of function call 'parse_sys_reg' with 'PARSE_FAIL' instead of 'FALSE'.
740 2013-01-07 Nick Clifton <nickc@redhat.com>
743 * config/tc-arm.c (skip_past_char): Skip whitespace before the
744 anticipated character.
745 * config/tc-arm.c (parse_address_main): Delete skip of whitespace
746 here as it is no longer needed.
748 2013-01-06 Andreas Schwab <schwab@linux-m68k.org>
750 * doc/c-mips.texi (MIPS Opts): Fix use of @itemx.
751 * doc/c-score.texi (SCORE-Opts): Likewise.
752 * doc/c-tic54x.texi (TIC54X-Directives): Likewise.
754 2013-01-04 Juergen Urban <JuergenUrban@gmx.de>
756 * config/tc-mips.c: Add support for MIPS r5900.
757 Add M_LQ_AB and M_SQ_AB to support large values for instructions
759 (can_swap_branch_p, get_append_method): Detect some conditional
760 short loops to fix a bug on the r5900 by NOP in the branch delay
762 (M_MUL): Support 3 operands in multu on r5900.
763 (M_TRUNCWS): Support trunc.w.s on r5900 in MIPS ISA I.
764 (s_mipsset): Force 32 bit floating point on r5900.
765 (mips_ip): Check parameter range of instructions mfps and mtps on
767 * configure.in: Detect CPU type when target string contains r5900
768 (e.g. mips64r5900el-linux-gnu).
770 2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
772 * as.c (parse_args): Update copyright year to 2013.
774 2013-01-02 Yufeng Zhang <yufeng.zhang@arm.com>
776 * config/tc-aarch64.c (aarch64_cpus): Add entries for "cortex-a53"
779 2013-01-02 Nick Clifton <nickc@redhat.com>
782 * config/tc-arm.c (parse_address_main): Skip whitespace before a
785 For older changes see ChangeLog-2012
787 Copyright (C) 2013 Free Software Foundation, Inc.
789 Copying and distribution of this file, with or without modification,
790 are permitted in any medium without royalty provided the copyright
791 notice and this notice are preserved.
797 version-control: never