fs/splice.c

   1 /*
   2  * "splice": joining two ropes together by interweaving their strands.
   3  *
   4  * This is the "extended pipe" functionality, where a pipe is used as
   5  * an arbitrary in-memory buffer. Think of a pipe as a small kernel
   6  * buffer that you can use to transfer data from one end to the other.
   7  *
   8  * The traditional unix read/write is extended with a "splice()" operation
   9  * that transfers data buffers to or from a pipe buffer.
  10  *
  11  * Named by Larry McVoy, original implementation from Linus, extended by
  12  * Jens to support splicing to files, network, direct splicing, etc and
  13  * fixing lots of bugs.
  14  *
  15  * Copyright (C) 2005-2006 Jens Axboe <axboe@kernel.dk>
  16  * Copyright (C) 2005-2006 Linus Torvalds <torvalds@osdl.org>
  17  * Copyright (C) 2006 Ingo Molnar <mingo@elte.hu>
  18  *
  19  */
  20 #include <linux/fs.h>
  21 #include <linux/file.h>
  22 #include <linux/pagemap.h>
  23 #include <linux/splice.h>
  24 #include <linux/memcontrol.h>
  25 #include <linux/mm_inline.h>
  26 #include <linux/swap.h>
  27 #include <linux/writeback.h>
  28 #include <linux/export.h>
  29 #include <linux/syscalls.h>
  30 #include <linux/uio.h>
  31 #include <linux/security.h>
  32 #include <linux/gfp.h>
  33 #include <linux/socket.h>
  34
  35 /*
  36  * Attempt to steal a page from a pipe buffer. This should perhaps go into
  37  * a vm helper function, it's already simplified quite a bit by the
  38  * addition of remove_mapping(). If success is returned, the caller may
  39  * attempt to reuse this page for another destination.
  40  */
  41 static int page_cache_pipe_buf_steal(struct pipe_inode_info *pipe,
  42                                      struct pipe_buffer *buf)
  43 {
  44         struct page *page = buf->page;
  45         struct address_space *mapping;
  46
  47         lock_page(page);
  48
  49         mapping = page_mapping(page);
  50         if (mapping) {
  51                 WARN_ON(!PageUptodate(page));
  52
  53                 /*
  54                  * At least for ext2 with nobh option, we need to wait on
  55                  * writeback completing on this page, since we'll remove it
  56                  * from the pagecache.  Otherwise truncate wont wait on the
  57                  * page, allowing the disk blocks to be reused by someone else
  58                  * before we actually wrote our data to them. fs corruption
  59                  * ensues.
  60                  */
  61                 wait_on_page_writeback(page);
  62
  63                 if (page_has_private(page) &&
  64                     !try_to_release_page(page, GFP_KERNEL))
  65                         goto out_unlock;
  66
  67                 /*
  68                  * If we succeeded in removing the mapping, set LRU flag
  69                  * and return good.
  70                  */
  71                 if (remove_mapping(mapping, page)) {
  72                         buf->flags |= PIPE_BUF_FLAG_LRU;
  73                         return 0;
  74                 }
  75         }
  76
  77         /*
  78          * Raced with truncate or failed to remove page from current
  79          * address space, unlock and return failure.
  80          */
  81 out_unlock:
  82         unlock_page(page);
  83         return 1;
  84 }
  85
  86 static void page_cache_pipe_buf_release(struct pipe_inode_info *pipe,
  87                                         struct pipe_buffer *buf)
  88 {
  89         page_cache_release(buf->page);
  90         buf->flags &= ~PIPE_BUF_FLAG_LRU;
  91 }
  92
  93 /*
  94  * Check whether the contents of buf is OK to access. Since the content
  95  * is a page cache page, IO may be in flight.
  96  */
  97 static int page_cache_pipe_buf_confirm(struct pipe_inode_info *pipe,
  98                                        struct pipe_buffer *buf)
  99 {
 100         struct page *page = buf->page;
 101         int err;
 102
 103         if (!PageUptodate(page)) {
 104                 lock_page(page);
 105
 106                 /*
 107                  * Page got truncated/unhashed. This will cause a 0-byte
 108                  * splice, if this is the first page.
 109                  */
 110                 if (!page->mapping) {
 111                         err = -ENODATA;
 112                         goto error;
 113                 }
 114
 115                 /*
 116                  * Uh oh, read-error from disk.
 117                  */
 118                 if (!PageUptodate(page)) {
 119                         err = -EIO;
 120                         goto error;
 121                 }
 122
 123                 /*
 124                  * Page is ok afterall, we are done.
 125                  */
 126                 unlock_page(page);
 127         }
 128
 129         return 0;
 130 error:
 131         unlock_page(page);
 132         return err;
 133 }
 134
 135 const struct pipe_buf_operations page_cache_pipe_buf_ops = {
 136         .can_merge = 0,
 137         .map = generic_pipe_buf_map,
 138         .unmap = generic_pipe_buf_unmap,
 139         .confirm = page_cache_pipe_buf_confirm,
 140         .release = page_cache_pipe_buf_release,
 141         .steal = page_cache_pipe_buf_steal,
 142         .get = generic_pipe_buf_get,
 143 };
 144
 145 static int user_page_pipe_buf_steal(struct pipe_inode_info *pipe,
 146                                     struct pipe_buffer *buf)
 147 {
 148         if (!(buf->flags & PIPE_BUF_FLAG_GIFT))
 149                 return 1;
 150
 151         buf->flags |= PIPE_BUF_FLAG_LRU;
 152         return generic_pipe_buf_steal(pipe, buf);
 153 }
 154
 155 static const struct pipe_buf_operations user_page_pipe_buf_ops = {
 156         .can_merge = 0,
 157         .map = generic_pipe_buf_map,
 158         .unmap = generic_pipe_buf_unmap,
 159         .confirm = generic_pipe_buf_confirm,
 160         .release = page_cache_pipe_buf_release,
 161         .steal = user_page_pipe_buf_steal,
 162         .get = generic_pipe_buf_get,
 163 };
 164
 165 static void wakeup_pipe_readers(struct pipe_inode_info *pipe)
 166 {
 167         smp_mb();
 168         if (waitqueue_active(&pipe->wait))
 169                 wake_up_interruptible(&pipe->wait);
 170         kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
 171 }
 172
 173 /**
 174  * splice_to_pipe - fill passed data into a pipe
 175  * @pipe:       pipe to fill
 176  * @spd:        data to fill
 177  *
 178  * Description:
 179  *    @spd contains a map of pages and len/offset tuples, along with
 180  *    the struct pipe_buf_operations associated with these pages. This
 181  *    function will link that data to the pipe.
 182  *
 183  */
 184 ssize_t splice_to_pipe(struct pipe_inode_info *pipe,
 185                        struct splice_pipe_desc *spd)
 186 {
 187         unsigned int spd_pages = spd->nr_pages;
 188         int ret, do_wakeup, page_nr;
 189
 190         ret = 0;
 191         do_wakeup = 0;
 192         page_nr = 0;
 193
 194         pipe_lock(pipe);
 195
 196         for (;;) {
 197                 if (!pipe->readers) {
 198                         send_sig(SIGPIPE, current, 0);
 199                         if (!ret)
 200                                 ret = -EPIPE;
 201                         break;
 202                 }
 203
 204                 if (pipe->nrbufs < pipe->buffers) {
 205                         int newbuf = (pipe->curbuf + pipe->nrbufs) & (pipe->buffers - 1);
 206                         struct pipe_buffer *buf = pipe->bufs + newbuf;
 207
 208                         buf->page = spd->pages[page_nr];
 209                         buf->offset = spd->partial[page_nr].offset;
 210                         buf->len = spd->partial[page_nr].len;
 211                         buf->private = spd->partial[page_nr].private;
 212                         buf->ops = spd->ops;
 213                         if (spd->flags & SPLICE_F_GIFT)
 214                                 buf->flags |= PIPE_BUF_FLAG_GIFT;
 215
 216                         pipe->nrbufs++;
 217                         page_nr++;
 218                         ret += buf->len;
 219
 220                         if (pipe->inode)
 221                                 do_wakeup = 1;
 222
 223                         if (!--spd->nr_pages)
 224                                 break;
 225                         if (pipe->nrbufs < pipe->buffers)
 226                                 continue;
 227
 228                         break;
 229                 }
 230
 231                 if (spd->flags & SPLICE_F_NONBLOCK) {
 232                         if (!ret)
 233                                 ret = -EAGAIN;
 234                         break;
 235                 }
 236
 237                 if (signal_pending(current)) {
 238                         if (!ret)
 239                                 ret = -ERESTARTSYS;
 240                         break;
 241                 }
 242
 243                 if (do_wakeup) {
 244                         smp_mb();
 245                         if (waitqueue_active(&pipe->wait))
 246                                 wake_up_interruptible_sync(&pipe->wait);
 247                         kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
 248                         do_wakeup = 0;
 249                 }
 250
 251                 pipe->waiting_writers++;
 252                 pipe_wait(pipe);
 253                 pipe->waiting_writers--;
 254         }
 255
 256         pipe_unlock(pipe);
 257
 258         if (do_wakeup)
 259                 wakeup_pipe_readers(pipe);
 260
 261         while (page_nr < spd_pages)
 262                 spd->spd_release(spd, page_nr++);
 263
 264         return ret;
 265 }
 266
 267 void spd_release_page(struct splice_pipe_desc *spd, unsigned int i)
 268 {
 269         page_cache_release(spd->pages[i]);
 270 }
 271
 272 /*
 273  * Check if we need to grow the arrays holding pages and partial page
 274  * descriptions.
 275  */
 276 int splice_grow_spd(const struct pipe_inode_info *pipe, struct splice_pipe_desc *spd)
 277 {
 278         unsigned int buffers = ACCESS_ONCE(pipe->buffers);
 279
 280         spd->nr_pages_max = buffers;
 281         if (buffers <= PIPE_DEF_BUFFERS)
 282                 return 0;
 283
 284         spd->pages = kmalloc(buffers * sizeof(struct page *), GFP_KERNEL);
 285         spd->partial = kmalloc(buffers * sizeof(struct partial_page), GFP_KERNEL);
 286
 287         if (spd->pages && spd->partial)
 288                 return 0;
 289
 290         kfree(spd->pages);
 291         kfree(spd->partial);
 292         return -ENOMEM;
 293 }
 294
 295 void splice_shrink_spd(struct splice_pipe_desc *spd)
 296 {
 297         if (spd->nr_pages_max <= PIPE_DEF_BUFFERS)
 298                 return;
 299
 300         kfree(spd->pages);
 301         kfree(spd->partial);
 302 }
 303
 304 static int
 305 __generic_file_splice_read(struct file *in, loff_t *ppos,
 306                            struct pipe_inode_info *pipe, size_t len,
 307                            unsigned int flags)
 308 {
 309         struct address_space *mapping = in->f_mapping;
 310         unsigned int loff, nr_pages, req_pages;
 311         struct page *pages[PIPE_DEF_BUFFERS];
 312         struct partial_page partial[PIPE_DEF_BUFFERS];
 313         struct page *page;
 314         pgoff_t index, end_index;
 315         loff_t isize;
 316         int error, page_nr;
 317         struct splice_pipe_desc spd = {
 318                 .pages = pages,
 319                 .partial = partial,
 320                 .nr_pages_max = PIPE_DEF_BUFFERS,
 321                 .flags = flags,
 322                 .ops = &page_cache_pipe_buf_ops,
 323                 .spd_release = spd_release_page,
 324         };
 325
 326         if (splice_grow_spd(pipe, &spd))
 327                 return -ENOMEM;
 328
 329         index = *ppos >> PAGE_CACHE_SHIFT;
 330         loff = *ppos & ~PAGE_CACHE_MASK;
 331         req_pages = (len + loff + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
 332         nr_pages = min(req_pages, spd.nr_pages_max);
 333
 334         /*
 335          * Lookup the (hopefully) full range of pages we need.
 336          */
 337         spd.nr_pages = find_get_pages_contig(mapping, index, nr_pages, spd.pages);
 338         index += spd.nr_pages;
 339
 340         /*
 341          * If find_get_pages_contig() returned fewer pages than we needed,
 342          * readahead/allocate the rest and fill in the holes.
 343          */
 344         if (spd.nr_pages < nr_pages)
 345                 page_cache_sync_readahead(mapping, &in->f_ra, in,
 346                                 index, req_pages - spd.nr_pages);
 347
 348         error = 0;
 349         while (spd.nr_pages < nr_pages) {
 350                 /*
 351                  * Page could be there, find_get_pages_contig() breaks on
 352                  * the first hole.
 353                  */
 354                 page = find_get_page(mapping, index);
 355                 if (!page) {
 356                         /*
 357                          * page didn't exist, allocate one.
 358                          */
 359                         page = page_cache_alloc_cold(mapping);
 360                         if (!page)
 361                                 break;
 362
 363                         error = add_to_page_cache_lru(page, mapping, index,
 364                                                 GFP_KERNEL);
 365                         if (unlikely(error)) {
 366                                 page_cache_release(page);
 367                                 if (error == -EEXIST)
 368                                         continue;
 369                                 break;
 370                         }
 371                         /*
 372                          * add_to_page_cache() locks the page, unlock it
 373                          * to avoid convoluting the logic below even more.
 374                          */
 375                         unlock_page(page);
 376                 }
 377
 378                 spd.pages[spd.nr_pages++] = page;
 379                 index++;
 380         }
 381
 382         /*
 383          * Now loop over the map and see if we need to start IO on any
 384          * pages, fill in the partial map, etc.
 385          */
 386         index = *ppos >> PAGE_CACHE_SHIFT;
 387         nr_pages = spd.nr_pages;
 388         spd.nr_pages = 0;
 389         for (page_nr = 0; page_nr < nr_pages; page_nr++) {
 390                 unsigned int this_len;
 391
 392                 if (!len)
 393                         break;
 394
 395                 /*
 396                  * this_len is the max we'll use from this page
 397                  */
 398                 this_len = min_t(unsigned long, len, PAGE_CACHE_SIZE - loff);
 399                 page = spd.pages[page_nr];
 400
 401                 if (PageReadahead(page))
 402                         page_cache_async_readahead(mapping, &in->f_ra, in,
 403                                         page, index, req_pages - page_nr);
 404
 405                 /*
 406                  * If the page isn't uptodate, we may need to start io on it
 407                  */
 408                 if (!PageUptodate(page)) {
 409                         lock_page(page);
 410
 411                         /*
 412                          * Page was truncated, or invalidated by the
 413                          * filesystem.  Redo the find/create, but this time the
 414                          * page is kept locked, so there's no chance of another
 415                          * race with truncate/invalidate.
 416                          */
 417                         if (!page->mapping) {
 418                                 unlock_page(page);
 419                                 page = find_or_create_page(mapping, index,
 420                                                 mapping_gfp_mask(mapping));
 421
 422                                 if (!page) {
 423                                         error = -ENOMEM;
 424                                         break;
 425                                 }
 426                                 page_cache_release(spd.pages[page_nr]);
 427                                 spd.pages[page_nr] = page;
 428                         }
 429                         /*
 430                          * page was already under io and is now done, great
 431                          */
 432                         if (PageUptodate(page)) {
 433                                 unlock_page(page);
 434                                 goto fill_it;
 435                         }
 436
 437                         /*
 438                          * need to read in the page
 439                          */
 440                         error = mapping->a_ops->readpage(in, page);
 441                         if (unlikely(error)) {
 442                                 /*
 443                                  * We really should re-lookup the page here,
 444                                  * but it complicates things a lot. Instead
 445                                  * lets just do what we already stored, and
 446                                  * we'll get it the next time we are called.
 447                                  */
 448                                 if (error == AOP_TRUNCATED_PAGE)
 449                                         error = 0;
 450
 451                                 break;
 452                         }
 453                 }
 454 fill_it:
 455                 /*
 456                  * i_size must be checked after PageUptodate.
 457                  */
 458                 isize = i_size_read(mapping->host);
 459                 end_index = (isize - 1) >> PAGE_CACHE_SHIFT;
 460                 if (unlikely(!isize || index > end_index))
 461                         break;
 462
 463                 /*
 464                  * if this is the last page, see if we need to shrink
 465                  * the length and stop
 466                  */
 467                 if (end_index == index) {
 468                         unsigned int plen;
 469
 470                         /*
 471                          * max good bytes in this page
 472                          */
 473                         plen = ((isize - 1) & ~PAGE_CACHE_MASK) + 1;
 474                         if (plen <= loff)
 475                                 break;
 476
 477                         /*
 478                          * force quit after adding this page
 479                          */
 480                         this_len = min(this_len, plen - loff);
 481                         len = this_len;
 482                 }
 483
 484                 spd.partial[page_nr].offset = loff;
 485                 spd.partial[page_nr].len = this_len;
 486                 len -= this_len;
 487                 loff = 0;
 488                 spd.nr_pages++;
 489                 index++;
 490         }
 491
 492         /*
 493          * Release any pages at the end, if we quit early. 'page_nr' is how far
 494          * we got, 'nr_pages' is how many pages are in the map.
 495          */
 496         while (page_nr < nr_pages)
 497                 page_cache_release(spd.pages[page_nr++]);
 498         in->f_ra.prev_pos = (loff_t)index << PAGE_CACHE_SHIFT;
 499
 500         if (spd.nr_pages)
 501                 error = splice_to_pipe(pipe, &spd);
 502
 503         splice_shrink_spd(&spd);
 504         return error;
 505 }
 506
 507 /**
 508  * generic_file_splice_read - splice data from file to a pipe
 509  * @in:         file to splice from
 510  * @ppos:       position in @in
 511  * @pipe:       pipe to splice to
 512  * @len:        number of bytes to splice
 513  * @flags:      splice modifier flags
 514  *
 515  * Description:
 516  *    Will read pages from given file and fill them into a pipe. Can be
 517  *    used as long as the address_space operations for the source implements
 518  *    a readpage() hook.
 519  *
 520  */
 521 ssize_t generic_file_splice_read(struct file *in, loff_t *ppos,
 522                                  struct pipe_inode_info *pipe, size_t len,
 523                                  unsigned int flags)
 524 {
 525         loff_t isize, left;
 526         int ret;
 527
 528         isize = i_size_read(in->f_mapping->host);
 529         if (unlikely(*ppos >= isize))
 530                 return 0;
 531
 532         left = isize - *ppos;
 533         if (unlikely(left < len))
 534                 len = left;
 535
 536         ret = __generic_file_splice_read(in, ppos, pipe, len, flags);
 537         if (ret > 0) {
 538                 *ppos += ret;
 539                 file_accessed(in);
 540         }
 541
 542         return ret;
 543 }
 544 EXPORT_SYMBOL(generic_file_splice_read);
 545
 546 static const struct pipe_buf_operations default_pipe_buf_ops = {
 547         .can_merge = 0,
 548         .map = generic_pipe_buf_map,
 549         .unmap = generic_pipe_buf_unmap,
 550         .confirm = generic_pipe_buf_confirm,
 551         .release = generic_pipe_buf_release,
 552         .steal = generic_pipe_buf_steal,
 553         .get = generic_pipe_buf_get,
 554 };
 555
 556 static ssize_t kernel_readv(struct file *file, const struct iovec *vec,
 557                             unsigned long vlen, loff_t offset)
 558 {
 559         mm_segment_t old_fs;
 560         loff_t pos = offset;
 561         ssize_t res;
 562
 563         old_fs = get_fs();
 564         set_fs(get_ds());
 565         /* The cast to a user pointer is valid due to the set_fs() */
 566         res = vfs_readv(file, (const struct iovec __user *)vec, vlen, &pos);
 567         set_fs(old_fs);
 568
 569         return res;
 570 }
 571
 572 static ssize_t kernel_write(struct file *file, const char *buf, size_t count,
 573                             loff_t pos)
 574 {
 575         mm_segment_t old_fs;
 576         ssize_t res;
 577
 578         old_fs = get_fs();
 579         set_fs(get_ds());
 580         /* The cast to a user pointer is valid due to the set_fs() */
 581         res = vfs_write(file, (const char __user *)buf, count, &pos);
 582         set_fs(old_fs);
 583
 584         return res;
 585 }
 586
 587 ssize_t default_file_splice_read(struct file *in, loff_t *ppos,
 588                                  struct pipe_inode_info *pipe, size_t len,
 589                                  unsigned int flags)
 590 {
 591         unsigned int nr_pages;
 592         unsigned int nr_freed;
 593         size_t offset;
 594         struct page *pages[PIPE_DEF_BUFFERS];
 595         struct partial_page partial[PIPE_DEF_BUFFERS];
 596         struct iovec *vec, __vec[PIPE_DEF_BUFFERS];
 597         ssize_t res;
 598         size_t this_len;
 599         int error;
 600         int i;
 601         struct splice_pipe_desc spd = {
 602                 .pages = pages,
 603                 .partial = partial,
 604                 .nr_pages_max = PIPE_DEF_BUFFERS,
 605                 .flags = flags,
 606                 .ops = &default_pipe_buf_ops,
 607                 .spd_release = spd_release_page,
 608         };
 609
 610         if (splice_grow_spd(pipe, &spd))
 611                 return -ENOMEM;
 612
 613         res = -ENOMEM;
 614         vec = __vec;
 615         if (spd.nr_pages_max > PIPE_DEF_BUFFERS) {
 616                 vec = kmalloc(spd.nr_pages_max * sizeof(struct iovec), GFP_KERNEL);
 617                 if (!vec)
 618                         goto shrink_ret;
 619         }
 620
 621         offset = *ppos & ~PAGE_CACHE_MASK;
 622         nr_pages = (len + offset + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
 623
 624         for (i = 0; i < nr_pages && i < spd.nr_pages_max && len; i++) {
 625                 struct page *page;
 626
 627                 page = alloc_page(GFP_USER);
 628                 error = -ENOMEM;
 629                 if (!page)
 630                         goto err;
 631
 632                 this_len = min_t(size_t, len, PAGE_CACHE_SIZE - offset);
 633                 vec[i].iov_base = (void __user *) page_address(page);
 634                 vec[i].iov_len = this_len;
 635                 spd.pages[i] = page;
 636                 spd.nr_pages++;
 637                 len -= this_len;
 638                 offset = 0;
 639         }
 640
 641         res = kernel_readv(in, vec, spd.nr_pages, *ppos);
 642         if (res < 0) {
 643                 error = res;
 644                 goto err;
 645         }
 646
 647         error = 0;
 648         if (!res)
 649                 goto err;
 650
 651         nr_freed = 0;
 652         for (i = 0; i < spd.nr_pages; i++) {
 653                 this_len = min_t(size_t, vec[i].iov_len, res);
 654                 spd.partial[i].offset = 0;
 655                 spd.partial[i].len = this_len;
 656                 if (!this_len) {
 657                         __free_page(spd.pages[i]);
 658                         spd.pages[i] = NULL;
 659                         nr_freed++;
 660                 }
 661                 res -= this_len;
 662         }
 663         spd.nr_pages -= nr_freed;
 664
 665         res = splice_to_pipe(pipe, &spd);
 666         if (res > 0)
 667                 *ppos += res;
 668
 669 shrink_ret:
 670         if (vec != __vec)
 671                 kfree(vec);
 672         splice_shrink_spd(&spd);
 673         return res;
 674
 675 err:
 676         for (i = 0; i < spd.nr_pages; i++)
 677                 __free_page(spd.pages[i]);
 678
 679         res = error;
 680         goto shrink_ret;
 681 }
 682 EXPORT_SYMBOL(default_file_splice_read);
 683
 684 /*
 685  * Send 'sd->len' bytes to socket from 'sd->file' at position 'sd->pos'
 686  * using sendpage(). Return the number of bytes sent.
 687  */
 688 static int pipe_to_sendpage(struct pipe_inode_info *pipe,
 689                             struct pipe_buffer *buf, struct splice_desc *sd)
 690 {
 691         struct file *file = sd->u.file;
 692         loff_t pos = sd->pos;
 693         int more;
 694
 695         if (!likely(file->f_op && file->f_op->sendpage))
 696                 return -EINVAL;
 697
 698         more = (sd->flags & SPLICE_F_MORE) ? MSG_MORE : 0;
 699         if (sd->len < sd->total_len)
 700                 more |= MSG_SENDPAGE_NOTLAST;
 701         return file->f_op->sendpage(file, buf->page, buf->offset,
 702                                     sd->len, &pos, more);
 703 }
 704
 705 /*
 706  * This is a little more tricky than the file -> pipe splicing. There are
 707  * basically three cases:
 708  *
 709  *      - Destination page already exists in the address space and there
 710  *        are users of it. For that case we have no other option that
 711  *        copying the data. Tough luck.
 712  *      - Destination page already exists in the address space, but there
 713  *        are no users of it. Make sure it's uptodate, then drop it. Fall
 714  *        through to last case.
 715  *      - Destination page does not exist, we can add the pipe page to
 716  *        the page cache and avoid the copy.
 717  *
 718  * If asked to move pages to the output file (SPLICE_F_MOVE is set in
 719  * sd->flags), we attempt to migrate pages from the pipe to the output
 720  * file address space page cache. This is possible if no one else has
 721  * the pipe page referenced outside of the pipe and page cache. If
 722  * SPLICE_F_MOVE isn't set, or we cannot move the page, we simply create
 723  * a new page in the output file page cache and fill/dirty that.
 724  */
 725 int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
 726                  struct splice_desc *sd)
 727 {
 728         struct file *file = sd->u.file;
 729         struct address_space *mapping = file->f_mapping;
 730         unsigned int offset, this_len;
 731         struct page *page;
 732         void *fsdata;
 733         int ret;
 734
 735         offset = sd->pos & ~PAGE_CACHE_MASK;
 736
 737         this_len = sd->len;
 738         if (this_len + offset > PAGE_CACHE_SIZE)
 739                 this_len = PAGE_CACHE_SIZE - offset;
 740
 741         ret = pagecache_write_begin(file, mapping, sd->pos, this_len,
 742                                 AOP_FLAG_UNINTERRUPTIBLE, &page, &fsdata);
 743         if (unlikely(ret))
 744                 goto out;
 745
 746         if (buf->page != page) {
 747                 char *src = buf->ops->map(pipe, buf, 1);
 748                 char *dst = kmap_atomic(page);
 749
 750                 memcpy(dst + offset, src + buf->offset, this_len);
 751                 flush_dcache_page(page);
 752                 kunmap_atomic(dst);
 753                 buf->ops->unmap(pipe, buf, src);
 754         }
 755         ret = pagecache_write_end(file, mapping, sd->pos, this_len, this_len,
 756                                 page, fsdata);
 757 out:
 758         return ret;
 759 }
 760 EXPORT_SYMBOL(pipe_to_file);
 761
 762 static void wakeup_pipe_writers(struct pipe_inode_info *pipe)
 763 {
 764         smp_mb();
 765         if (waitqueue_active(&pipe->wait))
 766                 wake_up_interruptible(&pipe->wait);
 767         kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
 768 }
 769
 770 /**
 771  * splice_from_pipe_feed - feed available data from a pipe to a file
 772  * @pipe:       pipe to splice from
 773  * @sd:         information to @actor
 774  * @actor:      handler that splices the data
 775  *
 776  * Description:
 777  *    This function loops over the pipe and calls @actor to do the
 778  *    actual moving of a single struct pipe_buffer to the desired
 779  *    destination.  It returns when there's no more buffers left in
 780  *    the pipe or if the requested number of bytes (@sd->total_len)
 781  *    have been copied.  It returns a positive number (one) if the
 782  *    pipe needs to be filled with more data, zero if the required
 783  *    number of bytes have been copied and -errno on error.
 784  *
 785  *    This, together with splice_from_pipe_{begin,end,next}, may be
 786  *    used to implement the functionality of __splice_from_pipe() when
 787  *    locking is required around copying the pipe buffers to the
 788  *    destination.
 789  */
 790 int splice_from_pipe_feed(struct pipe_inode_info *pipe, struct splice_desc *sd,
 791                           splice_actor *actor)
 792 {
 793         int ret;
 794
 795         while (pipe->nrbufs) {
 796                 struct pipe_buffer *buf = pipe->bufs + pipe->curbuf;
 797                 const struct pipe_buf_operations *ops = buf->ops;
 798
 799                 sd->len = buf->len;
 800                 if (sd->len > sd->total_len)
 801                         sd->len = sd->total_len;
 802
 803                 ret = buf->ops->confirm(pipe, buf);
 804                 if (unlikely(ret)) {
 805                         if (ret == -ENODATA)
 806                                 ret = 0;
 807                         return ret;
 808                 }
 809
 810                 ret = actor(pipe, buf, sd);
 811                 if (ret <= 0)
 812                         return ret;
 813
 814                 buf->offset += ret;
 815                 buf->len -= ret;
 816
 817                 sd->num_spliced += ret;
 818                 sd->len -= ret;
 819                 sd->pos += ret;
 820                 sd->total_len -= ret;
 821
 822                 if (!buf->len) {
 823                         buf->ops = NULL;
 824                         ops->release(pipe, buf);
 825                         pipe->curbuf = (pipe->curbuf + 1) & (pipe->buffers - 1);
 826                         pipe->nrbufs--;
 827                         if (pipe->inode)
 828                                 sd->need_wakeup = true;
 829                 }
 830
 831                 if (!sd->total_len)
 832                         return 0;
 833         }
 834
 835         return 1;
 836 }
 837 EXPORT_SYMBOL(splice_from_pipe_feed);
 838
 839 /**
 840  * splice_from_pipe_next - wait for some data to splice from
 841  * @pipe:       pipe to splice from
 842  * @sd:         information about the splice operation
 843  *
 844  * Description:
 845  *    This function will wait for some data and return a positive
 846  *    value (one) if pipe buffers are available.  It will return zero
 847  *    or -errno if no more data needs to be spliced.
 848  */
 849 int splice_from_pipe_next(struct pipe_inode_info *pipe, struct splice_desc *sd)
 850 {
 851         while (!pipe->nrbufs) {
 852                 if (!pipe->writers)
 853                         return 0;
 854
 855                 if (!pipe->waiting_writers && sd->num_spliced)
 856                         return 0;
 857
 858                 if (sd->flags & SPLICE_F_NONBLOCK)
 859                         return -EAGAIN;
 860
 861                 if (signal_pending(current))
 862                         return -ERESTARTSYS;
 863
 864                 if (sd->need_wakeup) {
 865                         wakeup_pipe_writers(pipe);
 866                         sd->need_wakeup = false;
 867                 }
 868
 869                 pipe_wait(pipe);
 870         }
 871
 872         return 1;
 873 }
 874 EXPORT_SYMBOL(splice_from_pipe_next);
 875
 876 /**
 877  * splice_from_pipe_begin - start splicing from pipe
 878  * @sd:         information about the splice operation
 879  *
 880  * Description:
 881  *    This function should be called before a loop containing
 882  *    splice_from_pipe_next() and splice_from_pipe_feed() to
 883  *    initialize the necessary fields of @sd.
 884  */
 885 void splice_from_pipe_begin(struct splice_desc *sd)
 886 {
 887         sd->num_spliced = 0;
 888         sd->need_wakeup = false;
 889 }
 890 EXPORT_SYMBOL(splice_from_pipe_begin);
 891
 892 /**
 893  * splice_from_pipe_end - finish splicing from pipe
 894  * @pipe:       pipe to splice from
 895  * @sd:         information about the splice operation
 896  *
 897  * Description:
 898  *    This function will wake up pipe writers if necessary.  It should
 899  *    be called after a loop containing splice_from_pipe_next() and
 900  *    splice_from_pipe_feed().
 901  */
 902 void splice_from_pipe_end(struct pipe_inode_info *pipe, struct splice_desc *sd)
 903 {
 904         if (sd->need_wakeup)
 905                 wakeup_pipe_writers(pipe);
 906 }
 907 EXPORT_SYMBOL(splice_from_pipe_end);
 908
 909 /**
 910  * __splice_from_pipe - splice data from a pipe to given actor
 911  * @pipe:       pipe to splice from
 912  * @sd:         information to @actor
 913  * @actor:      handler that splices the data
 914  *
 915  * Description:
 916  *    This function does little more than loop over the pipe and call
 917  *    @actor to do the actual moving of a single struct pipe_buffer to
 918  *    the desired destination. See pipe_to_file, pipe_to_sendpage, or
 919  *    pipe_to_user.
 920  *
 921  */
 922 ssize_t __splice_from_pipe(struct pipe_inode_info *pipe, struct splice_desc *sd,
 923                            splice_actor *actor)
 924 {
 925         int ret;
 926
 927         splice_from_pipe_begin(sd);
 928         do {
 929                 ret = splice_from_pipe_next(pipe, sd);
 930                 if (ret > 0)
 931                         ret = splice_from_pipe_feed(pipe, sd, actor);
 932         } while (ret > 0);
 933         splice_from_pipe_end(pipe, sd);
 934
 935         return sd->num_spliced ? sd->num_spliced : ret;
 936 }
 937 EXPORT_SYMBOL(__splice_from_pipe);
 938
 939 /**
 940  * splice_from_pipe - splice data from a pipe to a file
 941  * @pipe:       pipe to splice from
 942  * @out:        file to splice to
 943  * @ppos:       position in @out
 944  * @len:        how many bytes to splice
 945  * @flags:      splice modifier flags
 946  * @actor:      handler that splices the data
 947  *
 948  * Description:
 949  *    See __splice_from_pipe. This function locks the pipe inode,
 950  *    otherwise it's identical to __splice_from_pipe().
 951  *
 952  */
 953 ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out,
 954                          loff_t *ppos, size_t len, unsigned int flags,
 955                          splice_actor *actor)
 956 {
 957         ssize_t ret;
 958         struct splice_desc sd = {
 959                 .total_len = len,
 960                 .flags = flags,
 961                 .pos = *ppos,
 962                 .u.file = out,
 963         };
 964
 965         pipe_lock(pipe);
 966         ret = __splice_from_pipe(pipe, &sd, actor);
 967         pipe_unlock(pipe);
 968
 969         return ret;
 970 }
 971
 972 /**
 973  * generic_file_splice_write - splice data from a pipe to a file
 974  * @pipe:       pipe info
 975  * @out:        file to write to
 976  * @ppos:       position in @out
 977  * @len:        number of bytes to splice
 978  * @flags:      splice modifier flags
 979  *
 980  * Description:
 981  *    Will either move or copy pages (determined by @flags options) from
 982  *    the given pipe inode to the given file.
 983  *
 984  */
 985 ssize_t
 986 generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out,
 987                           loff_t *ppos, size_t len, unsigned int flags)
 988 {
 989         struct address_space *mapping = out->f_mapping;
 990         struct inode *inode = mapping->host;
 991         struct splice_desc sd = {
 992                 .total_len = len,
 993                 .flags = flags,
 994                 .pos = *ppos,
 995                 .u.file = out,
 996         };
 997         ssize_t ret;
 998
 999         sb_start_write(inode->i_sb);
1000
1001         pipe_lock(pipe);
1002
1003         splice_from_pipe_begin(&sd);
1004         do {
1005                 ret = splice_from_pipe_next(pipe, &sd);
1006                 if (ret <= 0)
1007                         break;
1008
1009                 mutex_lock_nested(&inode->i_mutex, I_MUTEX_CHILD);
1010                 ret = file_remove_suid(out);
1011                 if (!ret) {
1012                         ret = file_update_time(out);
1013                         if (!ret)
1014                                 ret = splice_from_pipe_feed(pipe, &sd,
1015                                                             pipe_to_file);
1016                 }
1017                 mutex_unlock(&inode->i_mutex);
1018         } while (ret > 0);
1019         splice_from_pipe_end(pipe, &sd);
1020
1021         pipe_unlock(pipe);
1022
1023         if (sd.num_spliced)
1024                 ret = sd.num_spliced;
1025
1026         if (ret > 0) {
1027                 unsigned long nr_pages;
1028                 int err;
1029
1030                 nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
1031
1032                 err = generic_write_sync(out, *ppos, ret);
1033                 if (err)
1034                         ret = err;
1035                 else
1036                         *ppos += ret;
1037                 balance_dirty_pages_ratelimited_nr(mapping, nr_pages);
1038         }
1039         sb_end_write(inode->i_sb);
1040
1041         return ret;
1042 }
1043
1044 EXPORT_SYMBOL(generic_file_splice_write);
1045
1046 static int write_pipe_buf(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
1047                           struct splice_desc *sd)
1048 {
1049         int ret;
1050         void *data;
1051
1052         data = buf->ops->map(pipe, buf, 0);
1053         ret = kernel_write(sd->u.file, data + buf->offset, sd->len, sd->pos);
1054         buf->ops->unmap(pipe, buf, data);
1055
1056         return ret;
1057 }
1058
1059 static ssize_t default_file_splice_write(struct pipe_inode_info *pipe,
1060                                          struct file *out, loff_t *ppos,
1061                                          size_t len, unsigned int flags)
1062 {
1063         ssize_t ret;
1064
1065         ret = splice_from_pipe(pipe, out, ppos, len, flags, write_pipe_buf);
1066         if (ret > 0)
1067                 *ppos += ret;
1068
1069         return ret;
1070 }
1071
1072 /**
1073  * generic_splice_sendpage - splice data from a pipe to a socket
1074  * @pipe:       pipe to splice from
1075  * @out:        socket to write to
1076  * @ppos:       position in @out
1077  * @len:        number of bytes to splice
1078  * @flags:      splice modifier flags
1079  *
1080  * Description:
1081  *    Will send @len bytes from the pipe to a network socket. No data copying
1082  *    is involved.
1083  *
1084  */
1085 ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe, struct file *out,
1086                                 loff_t *ppos, size_t len, unsigned int flags)
1087 {
1088         return splice_from_pipe(pipe, out, ppos, len, flags, pipe_to_sendpage);
1089 }
1090
1091 EXPORT_SYMBOL(generic_splice_sendpage);
1092
1093 /*
1094  * Attempt to initiate a splice from pipe to file.
1095  */
1096 static long do_splice_from(struct pipe_inode_info *pipe, struct file *out,
1097                            loff_t *ppos, size_t len, unsigned int flags)
1098 {
1099         ssize_t (*splice_write)(struct pipe_inode_info *, struct file *,
1100                                 loff_t *, size_t, unsigned int);
1101         int ret;
1102
1103         if (unlikely(!(out->f_mode & FMODE_WRITE)))
1104                 return -EBADF;
1105
1106         if (unlikely(out->f_flags & O_APPEND))
1107                 return -EINVAL;
1108
1109         ret = rw_verify_area(WRITE, out, ppos, len);
1110         if (unlikely(ret < 0))
1111                 return ret;
1112
1113         if (out->f_op && out->f_op->splice_write)
1114                 splice_write = out->f_op->splice_write;
1115         else
1116                 splice_write = default_file_splice_write;
1117
1118         return splice_write(pipe, out, ppos, len, flags);
1119 }
1120
1121 /*
1122  * Attempt to initiate a splice from a file to a pipe.
1123  */
1124 static long do_splice_to(struct file *in, loff_t *ppos,
1125                          struct pipe_inode_info *pipe, size_t len,
1126                          unsigned int flags)
1127 {
1128         ssize_t (*splice_read)(struct file *, loff_t *,
1129                                struct pipe_inode_info *, size_t, unsigned int);
1130         int ret;
1131
1132         if (unlikely(!(in->f_mode & FMODE_READ)))
1133                 return -EBADF;
1134
1135         ret = rw_verify_area(READ, in, ppos, len);
1136         if (unlikely(ret < 0))
1137                 return ret;
1138
1139         if (in->f_op && in->f_op->splice_read)
1140                 splice_read = in->f_op->splice_read;
1141         else
1142                 splice_read = default_file_splice_read;
1143
1144         return splice_read(in, ppos, pipe, len, flags);
1145 }
1146
1147 /**
1148  * splice_direct_to_actor - splices data directly between two non-pipes
1149  * @in:         file to splice from
1150  * @sd:         actor information on where to splice to
1151  * @actor:      handles the data splicing
1152  *
1153  * Description:
1154  *    This is a special case helper to splice directly between two
1155  *    points, without requiring an explicit pipe. Internally an allocated
1156  *    pipe is cached in the process, and reused during the lifetime of
1157  *    that process.
1158  *
1159  */
1160 ssize_t splice_direct_to_actor(struct file *in, struct splice_desc *sd,
1161                                splice_direct_actor *actor)
1162 {
1163         struct pipe_inode_info *pipe;
1164         long ret, bytes;
1165         umode_t i_mode;
1166         size_t len;
1167         int i, flags;
1168
1169         /*
1170          * We require the input being a regular file, as we don't want to
1171          * randomly drop data for eg socket -> socket splicing. Use the
1172          * piped splicing for that!
1173          */
1174         i_mode = in->f_path.dentry->d_inode->i_mode;
1175         if (unlikely(!S_ISREG(i_mode) && !S_ISBLK(i_mode)))
1176                 return -EINVAL;
1177
1178         /*
1179          * neither in nor out is a pipe, setup an internal pipe attached to
1180          * 'out' and transfer the wanted data from 'in' to 'out' through that
1181          */
1182         pipe = current->splice_pipe;
1183         if (unlikely(!pipe)) {
1184                 pipe = alloc_pipe_info(NULL);
1185                 if (!pipe)
1186                         return -ENOMEM;
1187
1188                 /*
1189                  * We don't have an immediate reader, but we'll read the stuff
1190                  * out of the pipe right after the splice_to_pipe(). So set
1191                  * PIPE_READERS appropriately.
1192                  */
1193                 pipe->readers = 1;
1194
1195                 current->splice_pipe = pipe;
1196         }
1197
1198         /*
1199          * Do the splice.
1200          */
1201         ret = 0;
1202         bytes = 0;
1203         len = sd->total_len;
1204         flags = sd->flags;
1205
1206         /*
1207          * Don't block on output, we have to drain the direct pipe.
1208          */
1209         sd->flags &= ~SPLICE_F_NONBLOCK;
1210
1211         while (len) {
1212                 size_t read_len;
1213                 loff_t pos = sd->pos, prev_pos = pos;
1214
1215                 ret = do_splice_to(in, &pos, pipe, len, flags);
1216                 if (unlikely(ret <= 0))
1217                         goto out_release;
1218
1219                 read_len = ret;
1220                 sd->total_len = read_len;
1221
1222                 /*
1223                  * NOTE: nonblocking mode only applies to the input. We
1224                  * must not do the output in nonblocking mode as then we
1225                  * could get stuck data in the internal pipe:
1226                  */
1227                 ret = actor(pipe, sd);
1228                 if (unlikely(ret <= 0)) {
1229                         sd->pos = prev_pos;
1230                         goto out_release;
1231                 }
1232
1233                 bytes += ret;
1234                 len -= ret;
1235                 sd->pos = pos;
1236
1237                 if (ret < read_len) {
1238                         sd->pos = prev_pos + ret;
1239                         goto out_release;
1240                 }
1241         }
1242
1243 done:
1244         pipe->nrbufs = pipe->curbuf = 0;
1245         file_accessed(in);
1246         return bytes;
1247
1248 out_release:
1249         /*
1250          * If we did an incomplete transfer we must release
1251          * the pipe buffers in question:
1252          */
1253         for (i = 0; i < pipe->buffers; i++) {
1254                 struct pipe_buffer *buf = pipe->bufs + i;
1255
1256                 if (buf->ops) {
1257                         buf->ops->release(pipe, buf);
1258                         buf->ops = NULL;
1259                 }
1260         }
1261
1262         if (!bytes)
1263                 bytes = ret;
1264
1265         goto done;
1266 }
1267 EXPORT_SYMBOL(splice_direct_to_actor);
1268
1269 static int direct_splice_actor(struct pipe_inode_info *pipe,
1270                                struct splice_desc *sd)
1271 {
1272         struct file *file = sd->u.file;
1273
1274         return do_splice_from(pipe, file, &file->f_pos, sd->total_len,
1275                               sd->flags);
1276 }
1277
1278 /**
1279  * do_splice_direct - splices data directly between two files
1280  * @in:         file to splice from
1281  * @ppos:       input file offset
1282  * @out:        file to splice to
1283  * @len:        number of bytes to splice
1284  * @flags:      splice modifier flags
1285  *
1286  * Description:
1287  *    For use by do_sendfile(). splice can easily emulate sendfile, but
1288  *    doing it in the application would incur an extra system call
1289  *    (splice in + splice out, as compared to just sendfile()). So this helper
1290  *    can splice directly through a process-private pipe.
1291  *
1292  */
1293 long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
1294                       size_t len, unsigned int flags)
1295 {
1296         struct splice_desc sd = {
1297                 .len            = len,
1298                 .total_len      = len,
1299                 .flags          = flags,
1300                 .pos            = *ppos,
1301                 .u.file         = out,
1302         };
1303         long ret;
1304
1305         ret = splice_direct_to_actor(in, &sd, direct_splice_actor);
1306         if (ret > 0)
1307                 *ppos = sd.pos;
1308
1309         return ret;
1310 }
1311
1312 static int splice_pipe_to_pipe(struct pipe_inode_info *ipipe,
1313                                struct pipe_inode_info *opipe,
1314                                size_t len, unsigned int flags);
1315
1316 /*
1317  * Determine where to splice to/from.
1318  */
1319 static long do_splice(struct file *in, loff_t __user *off_in,
1320                       struct file *out, loff_t __user *off_out,
1321                       size_t len, unsigned int flags)
1322 {
1323         struct pipe_inode_info *ipipe;
1324         struct pipe_inode_info *opipe;
1325         loff_t offset, *off;
1326         long ret;
1327
1328         ipipe = get_pipe_info(in);
1329         opipe = get_pipe_info(out);
1330
1331         if (ipipe && opipe) {
1332                 if (off_in || off_out)
1333                         return -ESPIPE;
1334
1335                 if (!(in->f_mode & FMODE_READ))
1336                         return -EBADF;
1337
1338                 if (!(out->f_mode & FMODE_WRITE))
1339                         return -EBADF;
1340
1341                 /* Splicing to self would be fun, but... */
1342                 if (ipipe == opipe)
1343                         return -EINVAL;
1344
1345                 return splice_pipe_to_pipe(ipipe, opipe, len, flags);
1346         }
1347
1348         if (ipipe) {
1349                 if (off_in)
1350                         return -ESPIPE;
1351                 if (off_out) {
1352                         if (!(out->f_mode & FMODE_PWRITE))
1353                                 return -EINVAL;
1354                         if (copy_from_user(&offset, off_out, sizeof(loff_t)))
1355                                 return -EFAULT;
1356                         off = &offset;
1357                 } else
1358                         off = &out->f_pos;
1359
1360                 ret = do_splice_from(ipipe, out, off, len, flags);
1361
1362                 if (off_out && copy_to_user(off_out, off, sizeof(loff_t)))
1363                         ret = -EFAULT;
1364
1365                 return ret;
1366         }
1367
1368         if (opipe) {
1369                 if (off_out)
1370                         return -ESPIPE;
1371                 if (off_in) {
1372                         if (!(in->f_mode & FMODE_PREAD))
1373                                 return -EINVAL;
1374                         if (copy_from_user(&offset, off_in, sizeof(loff_t)))
1375                                 return -EFAULT;
1376                         off = &offset;
1377                 } else
1378                         off = &in->f_pos;
1379
1380                 ret = do_splice_to(in, off, opipe, len, flags);
1381
1382                 if (off_in && copy_to_user(off_in, off, sizeof(loff_t)))
1383                         ret = -EFAULT;
1384
1385                 return ret;
1386         }
1387
1388         return -EINVAL;
1389 }
1390
1391 /*
1392  * Map an iov into an array of pages and offset/length tupples. With the
1393  * partial_page structure, we can map several non-contiguous ranges into
1394  * our ones pages[] map instead of splitting that operation into pieces.
1395  * Could easily be exported as a generic helper for other users, in which
1396  * case one would probably want to add a 'max_nr_pages' parameter as well.
1397  */
1398 static int get_iovec_page_array(const struct iovec __user *iov,
1399                                 unsigned int nr_vecs, struct page **pages,
1400                                 struct partial_page *partial, bool aligned,
1401                                 unsigned int pipe_buffers)
1402 {
1403         int buffers = 0, error = 0;
1404
1405         while (nr_vecs) {
1406                 unsigned long off, npages;
1407                 struct iovec entry;
1408                 void __user *base;
1409                 size_t len;
1410                 int i;
1411
1412                 error = -EFAULT;
1413                 if (copy_from_user(&entry, iov, sizeof(entry)))
1414                         break;
1415
1416                 base = entry.iov_base;
1417                 len = entry.iov_len;
1418
1419                 /*
1420                  * Sanity check this iovec. 0 read succeeds.
1421                  */
1422                 error = 0;
1423                 if (unlikely(!len))
1424                         break;
1425                 error = -EFAULT;
1426                 if (!access_ok(VERIFY_READ, base, len))
1427                         break;
1428
1429                 /*
1430                  * Get this base offset and number of pages, then map
1431                  * in the user pages.
1432                  */
1433                 off = (unsigned long) base & ~PAGE_MASK;
1434
1435                 /*
1436                  * If asked for alignment, the offset must be zero and the
1437                  * length a multiple of the PAGE_SIZE.
1438                  */
1439                 error = -EINVAL;
1440                 if (aligned && (off || len & ~PAGE_MASK))
1441                         break;
1442
1443                 npages = (off + len + PAGE_SIZE - 1) >> PAGE_SHIFT;
1444                 if (npages > pipe_buffers - buffers)
1445                         npages = pipe_buffers - buffers;
1446
1447                 error = get_user_pages_fast((unsigned long)base, npages,
1448                                         0, &pages[buffers]);
1449
1450                 if (unlikely(error <= 0))
1451                         break;
1452
1453                 /*
1454                  * Fill this contiguous range into the partial page map.
1455                  */
1456                 for (i = 0; i < error; i++) {
1457                         const int plen = min_t(size_t, len, PAGE_SIZE - off);
1458
1459                         partial[buffers].offset = off;
1460                         partial[buffers].len = plen;
1461
1462                         off = 0;
1463                         len -= plen;
1464                         buffers++;
1465                 }
1466
1467                 /*
1468                  * We didn't complete this iov, stop here since it probably
1469                  * means we have to move some of this into a pipe to
1470                  * be able to continue.
1471                  */
1472                 if (len)
1473                         break;
1474
1475                 /*
1476                  * Don't continue if we mapped fewer pages than we asked for,
1477                  * or if we mapped the max number of pages that we have
1478                  * room for.
1479                  */
1480                 if (error < npages || buffers == pipe_buffers)
1481                         break;
1482
1483                 nr_vecs--;
1484                 iov++;
1485         }
1486
1487         if (buffers)
1488                 return buffers;
1489
1490         return error;
1491 }
1492
1493 static int pipe_to_user(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
1494                         struct splice_desc *sd)
1495 {
1496         char *src;
1497         int ret;
1498
1499         /*
1500          * See if we can use the atomic maps, by prefaulting in the
1501          * pages and doing an atomic copy
1502          */
1503         if (!fault_in_pages_writeable(sd->u.userptr, sd->len)) {
1504                 src = buf->ops->map(pipe, buf, 1);
1505                 ret = __copy_to_user_inatomic(sd->u.userptr, src + buf->offset,
1506                                                         sd->len);
1507                 buf->ops->unmap(pipe, buf, src);
1508                 if (!ret) {
1509                         ret = sd->len;
1510                         goto out;
1511                 }
1512         }
1513
1514         /*
1515          * No dice, use slow non-atomic map and copy
1516          */
1517         src = buf->ops->map(pipe, buf, 0);
1518
1519         ret = sd->len;
1520         if (copy_to_user(sd->u.userptr, src + buf->offset, sd->len))
1521                 ret = -EFAULT;
1522
1523         buf->ops->unmap(pipe, buf, src);
1524 out:
1525         if (ret > 0)
1526                 sd->u.userptr += ret;
1527         return ret;
1528 }
1529
1530 /*
1531  * For lack of a better implementation, implement vmsplice() to userspace
1532  * as a simple copy of the pipes pages to the user iov.
1533  */
1534 static long vmsplice_to_user(struct file *file, const struct iovec __user *iov,
1535                              unsigned long nr_segs, unsigned int flags)
1536 {
1537         struct pipe_inode_info *pipe;
1538         struct splice_desc sd;
1539         ssize_t size;
1540         int error;
1541         long ret;
1542
1543         pipe = get_pipe_info(file);
1544         if (!pipe)
1545                 return -EBADF;
1546
1547         pipe_lock(pipe);
1548
1549         error = ret = 0;
1550         while (nr_segs) {
1551                 void __user *base;
1552                 size_t len;
1553
1554                 /*
1555                  * Get user address base and length for this iovec.
1556                  */
1557                 error = get_user(base, &iov->iov_base);
1558                 if (unlikely(error))
1559                         break;
1560                 error = get_user(len, &iov->iov_len);
1561                 if (unlikely(error))
1562                         break;
1563
1564                 /*
1565                  * Sanity check this iovec. 0 read succeeds.
1566                  */
1567                 if (unlikely(!len))
1568                         break;
1569                 if (unlikely(!base)) {
1570                         error = -EFAULT;
1571                         break;
1572                 }
1573
1574                 if (unlikely(!access_ok(VERIFY_WRITE, base, len))) {
1575                         error = -EFAULT;
1576                         break;
1577                 }
1578
1579                 sd.len = 0;
1580                 sd.total_len = len;
1581                 sd.flags = flags;
1582                 sd.u.userptr = base;
1583                 sd.pos = 0;
1584
1585                 size = __splice_from_pipe(pipe, &sd, pipe_to_user);
1586                 if (size < 0) {
1587                         if (!ret)
1588                                 ret = size;
1589
1590                         break;
1591                 }
1592
1593                 ret += size;
1594
1595                 if (size < len)
1596                         break;
1597
1598                 nr_segs--;
1599                 iov++;
1600         }
1601
1602         pipe_unlock(pipe);
1603
1604         if (!ret)
1605                 ret = error;
1606
1607         return ret;
1608 }
1609
1610 /*
1611  * vmsplice splices a user address range into a pipe. It can be thought of
1612  * as splice-from-memory, where the regular splice is splice-from-file (or
1613  * to file). In both cases the output is a pipe, naturally.
1614  */
1615 static long vmsplice_to_pipe(struct file *file, const struct iovec __user *iov,
1616                              unsigned long nr_segs, unsigned int flags)
1617 {
1618         struct pipe_inode_info *pipe;
1619         struct page *pages[PIPE_DEF_BUFFERS];
1620         struct partial_page partial[PIPE_DEF_BUFFERS];
1621         struct splice_pipe_desc spd = {
1622                 .pages = pages,
1623                 .partial = partial,
1624                 .nr_pages_max = PIPE_DEF_BUFFERS,
1625                 .flags = flags,
1626                 .ops = &user_page_pipe_buf_ops,
1627                 .spd_release = spd_release_page,
1628         };
1629         long ret;
1630
1631         pipe = get_pipe_info(file);
1632         if (!pipe)
1633                 return -EBADF;
1634
1635         if (splice_grow_spd(pipe, &spd))
1636                 return -ENOMEM;
1637
1638         spd.nr_pages = get_iovec_page_array(iov, nr_segs, spd.pages,
1639                                             spd.partial, false,
1640                                             spd.nr_pages_max);
1641         if (spd.nr_pages <= 0)
1642                 ret = spd.nr_pages;
1643         else
1644                 ret = splice_to_pipe(pipe, &spd);
1645
1646         splice_shrink_spd(&spd);
1647         return ret;
1648 }
1649
1650 /*
1651  * Note that vmsplice only really supports true splicing _from_ user memory
1652  * to a pipe, not the other way around. Splicing from user memory is a simple
1653  * operation that can be supported without any funky alignment restrictions
1654  * or nasty vm tricks. We simply map in the user memory and fill them into
1655  * a pipe. The reverse isn't quite as easy, though. There are two possible
1656  * solutions for that:
1657  *
1658  *      - memcpy() the data internally, at which point we might as well just
1659  *        do a regular read() on the buffer anyway.
1660  *      - Lots of nasty vm tricks, that are neither fast nor flexible (it
1661  *        has restriction limitations on both ends of the pipe).
1662  *
1663  * Currently we punt and implement it as a normal copy, see pipe_to_user().
1664  *
1665  */
1666 SYSCALL_DEFINE4(vmsplice, int, fd, const struct iovec __user *, iov,
1667                 unsigned long, nr_segs, unsigned int, flags)
1668 {
1669         struct file *file;
1670         long error;
1671         int fput;
1672
1673         if (unlikely(nr_segs > UIO_MAXIOV))
1674                 return -EINVAL;
1675         else if (unlikely(!nr_segs))
1676                 return 0;
1677
1678         error = -EBADF;
1679         file = fget_light(fd, &fput);
1680         if (file) {
1681                 if (file->f_mode & FMODE_WRITE)
1682                         error = vmsplice_to_pipe(file, iov, nr_segs, flags);
1683                 else if (file->f_mode & FMODE_READ)
1684                         error = vmsplice_to_user(file, iov, nr_segs, flags);
1685
1686                 fput_light(file, fput);
1687         }
1688
1689         return error;
1690 }
1691
1692 SYSCALL_DEFINE6(splice, int, fd_in, loff_t __user *, off_in,
1693                 int, fd_out, loff_t __user *, off_out,
1694                 size_t, len, unsigned int, flags)
1695 {
1696         long error;
1697         struct file *in, *out;
1698         int fput_in, fput_out;
1699
1700         if (unlikely(!len))
1701                 return 0;
1702
1703         error = -EBADF;
1704         in = fget_light(fd_in, &fput_in);
1705         if (in) {
1706                 if (in->f_mode & FMODE_READ) {
1707                         out = fget_light(fd_out, &fput_out);
1708                         if (out) {
1709                                 if (out->f_mode & FMODE_WRITE)
1710                                         error = do_splice(in, off_in,
1711                                                           out, off_out,
1712                                                           len, flags);
1713                                 fput_light(out, fput_out);
1714                         }
1715                 }
1716
1717                 fput_light(in, fput_in);
1718         }
1719
1720         return error;
1721 }
1722
1723 /*
1724  * Make sure there's data to read. Wait for input if we can, otherwise
1725  * return an appropriate error.
1726  */
1727 static int ipipe_prep(struct pipe_inode_info *pipe, unsigned int flags)
1728 {
1729         int ret;
1730
1731         /*
1732          * Check ->nrbufs without the inode lock first. This function
1733          * is speculative anyways, so missing one is ok.
1734          */
1735         if (pipe->nrbufs)
1736                 return 0;
1737
1738         ret = 0;
1739         pipe_lock(pipe);
1740
1741         while (!pipe->nrbufs) {
1742                 if (signal_pending(current)) {
1743                         ret = -ERESTARTSYS;
1744                         break;
1745                 }
1746                 if (!pipe->writers)
1747                         break;
1748                 if (!pipe->waiting_writers) {
1749                         if (flags & SPLICE_F_NONBLOCK) {
1750                                 ret = -EAGAIN;
1751                                 break;
1752                         }
1753                 }
1754                 pipe_wait(pipe);
1755         }
1756
1757         pipe_unlock(pipe);
1758         return ret;
1759 }
1760
1761 /*
1762  * Make sure there's writeable room. Wait for room if we can, otherwise
1763  * return an appropriate error.
1764  */
1765 static int opipe_prep(struct pipe_inode_info *pipe, unsigned int flags)
1766 {
1767         int ret;
1768
1769         /*
1770          * Check ->nrbufs without the inode lock first. This function
1771          * is speculative anyways, so missing one is ok.
1772          */
1773         if (pipe->nrbufs < pipe->buffers)
1774                 return 0;
1775
1776         ret = 0;
1777         pipe_lock(pipe);
1778
1779         while (pipe->nrbufs >= pipe->buffers) {
1780                 if (!pipe->readers) {
1781                         send_sig(SIGPIPE, current, 0);
1782                         ret = -EPIPE;
1783                         break;
1784                 }
1785                 if (flags & SPLICE_F_NONBLOCK) {
1786                         ret = -EAGAIN;
1787                         break;
1788                 }
1789                 if (signal_pending(current)) {
1790                         ret = -ERESTARTSYS;
1791                         break;
1792                 }
1793                 pipe->waiting_writers++;
1794                 pipe_wait(pipe);
1795                 pipe->waiting_writers--;
1796         }
1797
1798         pipe_unlock(pipe);
1799         return ret;
1800 }
1801
1802 /*
1803  * Splice contents of ipipe to opipe.
1804  */
1805 static int splice_pipe_to_pipe(struct pipe_inode_info *ipipe,
1806                                struct pipe_inode_info *opipe,
1807                                size_t len, unsigned int flags)
1808 {
1809         struct pipe_buffer *ibuf, *obuf;
1810         int ret = 0, nbuf;
1811         bool input_wakeup = false;
1812
1813
1814 retry:
1815         ret = ipipe_prep(ipipe, flags);
1816         if (ret)
1817                 return ret;
1818
1819         ret = opipe_prep(opipe, flags);
1820         if (ret)
1821                 return ret;
1822
1823         /*
1824          * Potential ABBA deadlock, work around it by ordering lock
1825          * grabbing by pipe info address. Otherwise two different processes
1826          * could deadlock (one doing tee from A -> B, the other from B -> A).
1827          */
1828         pipe_double_lock(ipipe, opipe);
1829
1830         do {
1831                 if (!opipe->readers) {
1832                         send_sig(SIGPIPE, current, 0);
1833                         if (!ret)
1834                                 ret = -EPIPE;
1835                         break;
1836                 }
1837
1838                 if (!ipipe->nrbufs && !ipipe->writers)
1839                         break;
1840
1841                 /*
1842                  * Cannot make any progress, because either the input
1843                  * pipe is empty or the output pipe is full.
1844                  */
1845                 if (!ipipe->nrbufs || opipe->nrbufs >= opipe->buffers) {
1846                         /* Already processed some buffers, break */
1847                         if (ret)
1848                                 break;
1849
1850                         if (flags & SPLICE_F_NONBLOCK) {
1851                                 ret = -EAGAIN;
1852                                 break;
1853                         }
1854
1855                         /*
1856                          * We raced with another reader/writer and haven't
1857                          * managed to process any buffers.  A zero return
1858                          * value means EOF, so retry instead.
1859                          */
1860                         pipe_unlock(ipipe);
1861                         pipe_unlock(opipe);
1862                         goto retry;
1863                 }
1864
1865                 ibuf = ipipe->bufs + ipipe->curbuf;
1866                 nbuf = (opipe->curbuf + opipe->nrbufs) & (opipe->buffers - 1);
1867                 obuf = opipe->bufs + nbuf;
1868
1869                 if (len >= ibuf->len) {
1870                         /*
1871                          * Simply move the whole buffer from ipipe to opipe
1872                          */
1873                         *obuf = *ibuf;
1874                         ibuf->ops = NULL;
1875                         opipe->nrbufs++;
1876                         ipipe->curbuf = (ipipe->curbuf + 1) & (ipipe->buffers - 1);
1877                         ipipe->nrbufs--;
1878                         input_wakeup = true;
1879                 } else {
1880                         /*
1881                          * Get a reference to this pipe buffer,
1882                          * so we can copy the contents over.
1883                          */
1884                         ibuf->ops->get(ipipe, ibuf);
1885                         *obuf = *ibuf;
1886
1887                         /*
1888                          * Don't inherit the gift flag, we need to
1889                          * prevent multiple steals of this page.
1890                          */
1891                         obuf->flags &= ~PIPE_BUF_FLAG_GIFT;
1892
1893                         obuf->len = len;
1894                         opipe->nrbufs++;
1895                         ibuf->offset += obuf->len;
1896                         ibuf->len -= obuf->len;
1897                 }
1898                 ret += obuf->len;
1899                 len -= obuf->len;
1900         } while (len);
1901
1902         pipe_unlock(ipipe);
1903         pipe_unlock(opipe);
1904
1905         /*
1906          * If we put data in the output pipe, wakeup any potential readers.
1907          */
1908         if (ret > 0)
1909                 wakeup_pipe_readers(opipe);
1910
1911         if (input_wakeup)
1912                 wakeup_pipe_writers(ipipe);
1913
1914         return ret;
1915 }
1916
1917 /*
1918  * Link contents of ipipe to opipe.
1919  */
1920 static int link_pipe(struct pipe_inode_info *ipipe,
1921                      struct pipe_inode_info *opipe,
1922                      size_t len, unsigned int flags)
1923 {
1924         struct pipe_buffer *ibuf, *obuf;
1925         int ret = 0, i = 0, nbuf;
1926
1927         /*
1928          * Potential ABBA deadlock, work around it by ordering lock
1929          * grabbing by pipe info address. Otherwise two different processes
1930          * could deadlock (one doing tee from A -> B, the other from B -> A).
1931          */
1932         pipe_double_lock(ipipe, opipe);
1933
1934         do {
1935                 if (!opipe->readers) {
1936                         send_sig(SIGPIPE, current, 0);
1937                         if (!ret)
1938                                 ret = -EPIPE;
1939                         break;
1940                 }
1941
1942                 /*
1943                  * If we have iterated all input buffers or ran out of
1944                  * output room, break.
1945                  */
1946                 if (i >= ipipe->nrbufs || opipe->nrbufs >= opipe->buffers)
1947                         break;
1948
1949                 ibuf = ipipe->bufs + ((ipipe->curbuf + i) & (ipipe->buffers-1));
1950                 nbuf = (opipe->curbuf + opipe->nrbufs) & (opipe->buffers - 1);
1951
1952                 /*
1953                  * Get a reference to this pipe buffer,
1954                  * so we can copy the contents over.
1955                  */
1956                 ibuf->ops->get(ipipe, ibuf);
1957
1958                 obuf = opipe->bufs + nbuf;
1959                 *obuf = *ibuf;
1960
1961                 /*
1962                  * Don't inherit the gift flag, we need to
1963                  * prevent multiple steals of this page.
1964                  */
1965                 obuf->flags &= ~PIPE_BUF_FLAG_GIFT;
1966
1967                 if (obuf->len > len)
1968                         obuf->len = len;
1969
1970                 opipe->nrbufs++;
1971                 ret += obuf->len;
1972                 len -= obuf->len;
1973                 i++;
1974         } while (len);
1975
1976         /*
1977          * return EAGAIN if we have the potential of some data in the
1978          * future, otherwise just return 0
1979          */
1980         if (!ret && ipipe->waiting_writers && (flags & SPLICE_F_NONBLOCK))
1981                 ret = -EAGAIN;
1982
1983         pipe_unlock(ipipe);
1984         pipe_unlock(opipe);
1985
1986         /*
1987          * If we put data in the output pipe, wakeup any potential readers.
1988          */
1989         if (ret > 0)
1990                 wakeup_pipe_readers(opipe);
1991
1992         return ret;
1993 }
1994
1995 /*
1996  * This is a tee(1) implementation that works on pipes. It doesn't copy
1997  * any data, it simply references the 'in' pages on the 'out' pipe.
1998  * The 'flags' used are the SPLICE_F_* variants, currently the only
1999  * applicable one is SPLICE_F_NONBLOCK.
2000  */
2001 static long do_tee(struct file *in, struct file *out, size_t len,
2002                    unsigned int flags)
2003 {
2004         struct pipe_inode_info *ipipe = get_pipe_info(in);
2005         struct pipe_inode_info *opipe = get_pipe_info(out);
2006         int ret = -EINVAL;
2007
2008         /*
2009          * Duplicate the contents of ipipe to opipe without actually
2010          * copying the data.
2011          */
2012         if (ipipe && opipe && ipipe != opipe) {
2013                 /*
2014                  * Keep going, unless we encounter an error. The ipipe/opipe
2015                  * ordering doesn't really matter.
2016                  */
2017                 ret = ipipe_prep(ipipe, flags);
2018                 if (!ret) {
2019                         ret = opipe_prep(opipe, flags);
2020                         if (!ret)
2021                                 ret = link_pipe(ipipe, opipe, len, flags);
2022                 }
2023         }
2024
2025         return ret;
2026 }
2027
2028 SYSCALL_DEFINE4(tee, int, fdin, int, fdout, size_t, len, unsigned int, flags)
2029 {
2030         struct file *in;
2031         int error, fput_in;
2032
2033         if (unlikely(!len))
2034                 return 0;
2035
2036         error = -EBADF;
2037         in = fget_light(fdin, &fput_in);
2038         if (in) {
2039                 if (in->f_mode & FMODE_READ) {
2040                         int fput_out;
2041                         struct file *out = fget_light(fdout, &fput_out);
2042
2043                         if (out) {
2044                                 if (out->f_mode & FMODE_WRITE)
2045                                         error = do_tee(in, out, len, flags);
2046                                 fput_light(out, fput_out);
2047                         }
2048                 }
2049                 fput_light(in, fput_in);
2050         }
2051
2052         return error;
2053 }