1 // SPDX-License-Identifier: GPL-2.0
5 * Copyright (C) 1991, 1992, 1999 Linus Torvalds
9 #include <linux/file.h>
10 #include <linux/poll.h>
11 #include <linux/slab.h>
12 #include <linux/module.h>
13 #include <linux/init.h>
15 #include <linux/log2.h>
16 #include <linux/mount.h>
17 #include <linux/pseudo_fs.h>
18 #include <linux/magic.h>
19 #include <linux/pipe_fs_i.h>
20 #include <linux/uio.h>
21 #include <linux/highmem.h>
22 #include <linux/pagemap.h>
23 #include <linux/audit.h>
24 #include <linux/syscalls.h>
25 #include <linux/fcntl.h>
26 #include <linux/memcontrol.h>
27 #include <linux/watch_queue.h>
28 #include <linux/sysctl.h>
30 #include <linux/uaccess.h>
31 #include <asm/ioctls.h>
36 * New pipe buffers will be restricted to this size while the user is exceeding
37 * their pipe buffer quota. The general pipe use case needs at least two
38 * buffers: one for data yet to be read, and one for new data. If this is less
39 * than two, then a write to a non-empty pipe may block even if the pipe is not
40 * full. This can occur with GNU make jobserver or similar uses of pipes as
41 * semaphores: multiple processes may be waiting to write tokens back to the
42 * pipe before reading tokens: https://lore.kernel.org/lkml/1628086770.5rn8p04n6j.none@localhost/.
44 * Users can reduce their pipe buffers with F_SETPIPE_SZ below this at their
45 * own risk, namely: pipe writes to non-full pipes may block until the pipe is
48 #define PIPE_MIN_DEF_BUFFERS 2
51 * The max size that a non-root user is allowed to grow the pipe. Can
52 * be set by root in /proc/sys/fs/pipe-max-size
54 static unsigned int pipe_max_size = 1048576;
56 /* Maximum allocatable pages per user. Hard limit is unset by default, soft
57 * matches default values.
59 static unsigned long pipe_user_pages_hard;
60 static unsigned long pipe_user_pages_soft = PIPE_DEF_BUFFERS * INR_OPEN_CUR;
63 * We use head and tail indices that aren't masked off, except at the point of
64 * dereference, but rather they're allowed to wrap naturally. This means there
65 * isn't a dead spot in the buffer, but the ring has to be a power of two and
67 * -- David Howells 2019-09-23.
69 * Reads with count = 0 should always return 0.
70 * -- Julian Bradfield 1999-06-07.
72 * FIFOs and Pipes now generate SIGIO for both readers and writers.
73 * -- Jeremy Elson <jelson@circlemud.org> 2001-08-16
75 * pipe_read & write cleanup
76 * -- Manfred Spraul <manfred@colorfullife.com> 2002-05-09
79 static void pipe_lock_nested(struct pipe_inode_info *pipe, int subclass)
82 mutex_lock_nested(&pipe->mutex, subclass);
85 void pipe_lock(struct pipe_inode_info *pipe)
88 * pipe_lock() nests non-pipe inode locks (for writing to a file)
90 pipe_lock_nested(pipe, I_MUTEX_PARENT);
92 EXPORT_SYMBOL(pipe_lock);
94 void pipe_unlock(struct pipe_inode_info *pipe)
97 mutex_unlock(&pipe->mutex);
99 EXPORT_SYMBOL(pipe_unlock);
101 static inline void __pipe_lock(struct pipe_inode_info *pipe)
103 mutex_lock_nested(&pipe->mutex, I_MUTEX_PARENT);
106 static inline void __pipe_unlock(struct pipe_inode_info *pipe)
108 mutex_unlock(&pipe->mutex);
111 void pipe_double_lock(struct pipe_inode_info *pipe1,
112 struct pipe_inode_info *pipe2)
114 BUG_ON(pipe1 == pipe2);
117 pipe_lock_nested(pipe1, I_MUTEX_PARENT);
118 pipe_lock_nested(pipe2, I_MUTEX_CHILD);
120 pipe_lock_nested(pipe2, I_MUTEX_PARENT);
121 pipe_lock_nested(pipe1, I_MUTEX_CHILD);
125 static void anon_pipe_buf_release(struct pipe_inode_info *pipe,
126 struct pipe_buffer *buf)
128 struct page *page = buf->page;
131 * If nobody else uses this page, and we don't already have a
132 * temporary page, let's keep track of it as a one-deep
133 * allocation cache. (Otherwise just release our reference to it)
135 if (page_count(page) == 1 && !pipe->tmp_page)
136 pipe->tmp_page = page;
141 static bool anon_pipe_buf_try_steal(struct pipe_inode_info *pipe,
142 struct pipe_buffer *buf)
144 struct page *page = buf->page;
146 if (page_count(page) != 1)
148 memcg_kmem_uncharge_page(page, 0);
149 __SetPageLocked(page);
154 * generic_pipe_buf_try_steal - attempt to take ownership of a &pipe_buffer
155 * @pipe: the pipe that the buffer belongs to
156 * @buf: the buffer to attempt to steal
159 * This function attempts to steal the &struct page attached to
160 * @buf. If successful, this function returns 0 and returns with
161 * the page locked. The caller may then reuse the page for whatever
162 * he wishes; the typical use is insertion into a different file
165 bool generic_pipe_buf_try_steal(struct pipe_inode_info *pipe,
166 struct pipe_buffer *buf)
168 struct page *page = buf->page;
171 * A reference of one is golden, that means that the owner of this
172 * page is the only one holding a reference to it. lock the page
175 if (page_count(page) == 1) {
181 EXPORT_SYMBOL(generic_pipe_buf_try_steal);
184 * generic_pipe_buf_get - get a reference to a &struct pipe_buffer
185 * @pipe: the pipe that the buffer belongs to
186 * @buf: the buffer to get a reference to
189 * This function grabs an extra reference to @buf. It's used in
190 * the tee() system call, when we duplicate the buffers in one
193 bool generic_pipe_buf_get(struct pipe_inode_info *pipe, struct pipe_buffer *buf)
195 return try_get_page(buf->page);
197 EXPORT_SYMBOL(generic_pipe_buf_get);
200 * generic_pipe_buf_release - put a reference to a &struct pipe_buffer
201 * @pipe: the pipe that the buffer belongs to
202 * @buf: the buffer to put a reference to
205 * This function releases a reference to @buf.
207 void generic_pipe_buf_release(struct pipe_inode_info *pipe,
208 struct pipe_buffer *buf)
212 EXPORT_SYMBOL(generic_pipe_buf_release);
214 static const struct pipe_buf_operations anon_pipe_buf_ops = {
215 .release = anon_pipe_buf_release,
216 .try_steal = anon_pipe_buf_try_steal,
217 .get = generic_pipe_buf_get,
220 /* Done while waiting without holding the pipe lock - thus the READ_ONCE() */
221 static inline bool pipe_readable(const struct pipe_inode_info *pipe)
223 unsigned int head = READ_ONCE(pipe->head);
224 unsigned int tail = READ_ONCE(pipe->tail);
225 unsigned int writers = READ_ONCE(pipe->writers);
227 return !pipe_empty(head, tail) || !writers;
231 pipe_read(struct kiocb *iocb, struct iov_iter *to)
233 size_t total_len = iov_iter_count(to);
234 struct file *filp = iocb->ki_filp;
235 struct pipe_inode_info *pipe = filp->private_data;
236 bool was_full, wake_next_reader = false;
239 /* Null read succeeds. */
240 if (unlikely(total_len == 0))
247 * We only wake up writers if the pipe was full when we started
248 * reading in order to avoid unnecessary wakeups.
250 * But when we do wake up writers, we do so using a sync wakeup
251 * (WF_SYNC), because we want them to get going and generate more
254 was_full = pipe_full(pipe->head, pipe->tail, pipe->max_usage);
256 /* Read ->head with a barrier vs post_one_notification() */
257 unsigned int head = smp_load_acquire(&pipe->head);
258 unsigned int tail = pipe->tail;
259 unsigned int mask = pipe->ring_size - 1;
261 #ifdef CONFIG_WATCH_QUEUE
262 if (pipe->note_loss) {
263 struct watch_notification n;
271 n.type = WATCH_TYPE_META;
272 n.subtype = WATCH_META_LOSS_NOTIFICATION;
273 n.info = watch_sizeof(n);
274 if (copy_to_iter(&n, sizeof(n), to) != sizeof(n)) {
280 total_len -= sizeof(n);
281 pipe->note_loss = false;
285 if (!pipe_empty(head, tail)) {
286 struct pipe_buffer *buf = &pipe->bufs[tail & mask];
287 size_t chars = buf->len;
291 if (chars > total_len) {
292 if (buf->flags & PIPE_BUF_FLAG_WHOLE) {
300 error = pipe_buf_confirm(pipe, buf);
307 written = copy_page_to_iter(buf->page, buf->offset, chars, to);
308 if (unlikely(written < chars)) {
314 buf->offset += chars;
317 /* Was it a packet buffer? Clean up and exit */
318 if (buf->flags & PIPE_BUF_FLAG_PACKET) {
324 pipe_buf_release(pipe, buf);
325 spin_lock_irq(&pipe->rd_wait.lock);
326 #ifdef CONFIG_WATCH_QUEUE
327 if (buf->flags & PIPE_BUF_FLAG_LOSS)
328 pipe->note_loss = true;
332 spin_unlock_irq(&pipe->rd_wait.lock);
336 break; /* common path: read succeeded */
337 if (!pipe_empty(head, tail)) /* More to do? */
345 if ((filp->f_flags & O_NONBLOCK) ||
346 (iocb->ki_flags & IOCB_NOWAIT)) {
353 * We only get here if we didn't actually read anything.
355 * However, we could have seen (and removed) a zero-sized
356 * pipe buffer, and might have made space in the buffers
359 * You can't make zero-sized pipe buffers by doing an empty
360 * write (not even in packet mode), but they can happen if
361 * the writer gets an EFAULT when trying to fill a buffer
362 * that already got allocated and inserted in the buffer
365 * So we still need to wake up any pending writers in the
366 * _very_ unlikely case that the pipe was full, but we got
369 if (unlikely(was_full))
370 wake_up_interruptible_sync_poll(&pipe->wr_wait, EPOLLOUT | EPOLLWRNORM);
371 kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
374 * But because we didn't read anything, at this point we can
375 * just return directly with -ERESTARTSYS if we're interrupted,
376 * since we've done any required wakeups and there's no need
377 * to mark anything accessed. And we've dropped the lock.
379 if (wait_event_interruptible_exclusive(pipe->rd_wait, pipe_readable(pipe)) < 0)
383 was_full = pipe_full(pipe->head, pipe->tail, pipe->max_usage);
384 wake_next_reader = true;
386 if (pipe_empty(pipe->head, pipe->tail))
387 wake_next_reader = false;
391 wake_up_interruptible_sync_poll(&pipe->wr_wait, EPOLLOUT | EPOLLWRNORM);
392 if (wake_next_reader)
393 wake_up_interruptible_sync_poll(&pipe->rd_wait, EPOLLIN | EPOLLRDNORM);
394 kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
400 static inline int is_packetized(struct file *file)
402 return (file->f_flags & O_DIRECT) != 0;
405 /* Done while waiting without holding the pipe lock - thus the READ_ONCE() */
406 static inline bool pipe_writable(const struct pipe_inode_info *pipe)
408 unsigned int head = READ_ONCE(pipe->head);
409 unsigned int tail = READ_ONCE(pipe->tail);
410 unsigned int max_usage = READ_ONCE(pipe->max_usage);
412 return !pipe_full(head, tail, max_usage) ||
413 !READ_ONCE(pipe->readers);
417 pipe_write(struct kiocb *iocb, struct iov_iter *from)
419 struct file *filp = iocb->ki_filp;
420 struct pipe_inode_info *pipe = filp->private_data;
423 size_t total_len = iov_iter_count(from);
425 bool was_empty = false;
426 bool wake_next_writer = false;
428 /* Null write succeeds. */
429 if (unlikely(total_len == 0))
434 if (!pipe->readers) {
435 send_sig(SIGPIPE, current, 0);
440 #ifdef CONFIG_WATCH_QUEUE
441 if (pipe->watch_queue) {
448 * If it wasn't empty we try to merge new data into
451 * That naturally merges small writes, but it also
452 * page-aligns the rest of the writes for large writes
453 * spanning multiple pages.
456 was_empty = pipe_empty(head, pipe->tail);
457 chars = total_len & (PAGE_SIZE-1);
458 if (chars && !was_empty) {
459 unsigned int mask = pipe->ring_size - 1;
460 struct pipe_buffer *buf = &pipe->bufs[(head - 1) & mask];
461 int offset = buf->offset + buf->len;
463 if ((buf->flags & PIPE_BUF_FLAG_CAN_MERGE) &&
464 offset + chars <= PAGE_SIZE) {
465 ret = pipe_buf_confirm(pipe, buf);
469 ret = copy_page_from_iter(buf->page, offset, chars, from);
470 if (unlikely(ret < chars)) {
476 if (!iov_iter_count(from))
482 if (!pipe->readers) {
483 send_sig(SIGPIPE, current, 0);
490 if (!pipe_full(head, pipe->tail, pipe->max_usage)) {
491 unsigned int mask = pipe->ring_size - 1;
492 struct pipe_buffer *buf;
493 struct page *page = pipe->tmp_page;
497 page = alloc_page(GFP_HIGHUSER | __GFP_ACCOUNT);
498 if (unlikely(!page)) {
499 ret = ret ? : -ENOMEM;
502 pipe->tmp_page = page;
505 /* Allocate a slot in the ring in advance and attach an
506 * empty buffer. If we fault or otherwise fail to use
507 * it, either the reader will consume it or it'll still
508 * be there for the next write.
510 spin_lock_irq(&pipe->rd_wait.lock);
513 if (pipe_full(head, pipe->tail, pipe->max_usage)) {
514 spin_unlock_irq(&pipe->rd_wait.lock);
518 pipe->head = head + 1;
519 spin_unlock_irq(&pipe->rd_wait.lock);
521 /* Insert it into the buffer array */
522 buf = &pipe->bufs[head & mask];
524 buf->ops = &anon_pipe_buf_ops;
527 if (is_packetized(filp))
528 buf->flags = PIPE_BUF_FLAG_PACKET;
530 buf->flags = PIPE_BUF_FLAG_CAN_MERGE;
531 pipe->tmp_page = NULL;
533 copied = copy_page_from_iter(page, 0, PAGE_SIZE, from);
534 if (unlikely(copied < PAGE_SIZE && iov_iter_count(from))) {
543 if (!iov_iter_count(from))
547 if (!pipe_full(head, pipe->tail, pipe->max_usage))
550 /* Wait for buffer space to become available. */
551 if ((filp->f_flags & O_NONBLOCK) ||
552 (iocb->ki_flags & IOCB_NOWAIT)) {
557 if (signal_pending(current)) {
564 * We're going to release the pipe lock and wait for more
565 * space. We wake up any readers if necessary, and then
566 * after waiting we need to re-check whether the pipe
567 * become empty while we dropped the lock.
571 wake_up_interruptible_sync_poll(&pipe->rd_wait, EPOLLIN | EPOLLRDNORM);
572 kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
573 wait_event_interruptible_exclusive(pipe->wr_wait, pipe_writable(pipe));
575 was_empty = pipe_empty(pipe->head, pipe->tail);
576 wake_next_writer = true;
579 if (pipe_full(pipe->head, pipe->tail, pipe->max_usage))
580 wake_next_writer = false;
584 * If we do do a wakeup event, we do a 'sync' wakeup, because we
585 * want the reader to start processing things asap, rather than
586 * leave the data pending.
588 * This is particularly important for small writes, because of
589 * how (for example) the GNU make jobserver uses small writes to
590 * wake up pending jobs
592 * Epoll nonsensically wants a wakeup whether the pipe
593 * was already empty or not.
595 if (was_empty || pipe->poll_usage)
596 wake_up_interruptible_sync_poll(&pipe->rd_wait, EPOLLIN | EPOLLRDNORM);
597 kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
598 if (wake_next_writer)
599 wake_up_interruptible_sync_poll(&pipe->wr_wait, EPOLLOUT | EPOLLWRNORM);
600 if (ret > 0 && sb_start_write_trylock(file_inode(filp)->i_sb)) {
601 int err = file_update_time(filp);
604 sb_end_write(file_inode(filp)->i_sb);
609 static long pipe_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
611 struct pipe_inode_info *pipe = filp->private_data;
612 unsigned int count, head, tail, mask;
620 mask = pipe->ring_size - 1;
622 while (tail != head) {
623 count += pipe->bufs[tail & mask].len;
628 return put_user(count, (int __user *)arg);
630 #ifdef CONFIG_WATCH_QUEUE
631 case IOC_WATCH_QUEUE_SET_SIZE: {
634 ret = watch_queue_set_size(pipe, arg);
639 case IOC_WATCH_QUEUE_SET_FILTER:
640 return watch_queue_set_filter(
641 pipe, (struct watch_notification_filter __user *)arg);
649 /* No kernel lock held - fine */
651 pipe_poll(struct file *filp, poll_table *wait)
654 struct pipe_inode_info *pipe = filp->private_data;
655 unsigned int head, tail;
657 /* Epoll has some historical nasty semantics, this enables them */
658 WRITE_ONCE(pipe->poll_usage, true);
661 * Reading pipe state only -- no need for acquiring the semaphore.
663 * But because this is racy, the code has to add the
664 * entry to the poll table _first_ ..
666 if (filp->f_mode & FMODE_READ)
667 poll_wait(filp, &pipe->rd_wait, wait);
668 if (filp->f_mode & FMODE_WRITE)
669 poll_wait(filp, &pipe->wr_wait, wait);
672 * .. and only then can you do the racy tests. That way,
673 * if something changes and you got it wrong, the poll
674 * table entry will wake you up and fix it.
676 head = READ_ONCE(pipe->head);
677 tail = READ_ONCE(pipe->tail);
680 if (filp->f_mode & FMODE_READ) {
681 if (!pipe_empty(head, tail))
682 mask |= EPOLLIN | EPOLLRDNORM;
683 if (!pipe->writers && filp->f_version != pipe->w_counter)
687 if (filp->f_mode & FMODE_WRITE) {
688 if (!pipe_full(head, tail, pipe->max_usage))
689 mask |= EPOLLOUT | EPOLLWRNORM;
691 * Most Unices do not set EPOLLERR for FIFOs but on Linux they
692 * behave exactly like pipes for poll().
701 static void put_pipe_info(struct inode *inode, struct pipe_inode_info *pipe)
705 spin_lock(&inode->i_lock);
706 if (!--pipe->files) {
707 inode->i_pipe = NULL;
710 spin_unlock(&inode->i_lock);
713 free_pipe_info(pipe);
717 pipe_release(struct inode *inode, struct file *file)
719 struct pipe_inode_info *pipe = file->private_data;
722 if (file->f_mode & FMODE_READ)
724 if (file->f_mode & FMODE_WRITE)
727 /* Was that the last reader or writer, but not the other side? */
728 if (!pipe->readers != !pipe->writers) {
729 wake_up_interruptible_all(&pipe->rd_wait);
730 wake_up_interruptible_all(&pipe->wr_wait);
731 kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
732 kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
736 put_pipe_info(inode, pipe);
741 pipe_fasync(int fd, struct file *filp, int on)
743 struct pipe_inode_info *pipe = filp->private_data;
747 if (filp->f_mode & FMODE_READ)
748 retval = fasync_helper(fd, filp, on, &pipe->fasync_readers);
749 if ((filp->f_mode & FMODE_WRITE) && retval >= 0) {
750 retval = fasync_helper(fd, filp, on, &pipe->fasync_writers);
751 if (retval < 0 && (filp->f_mode & FMODE_READ))
752 /* this can happen only if on == T */
753 fasync_helper(-1, filp, 0, &pipe->fasync_readers);
759 unsigned long account_pipe_buffers(struct user_struct *user,
760 unsigned long old, unsigned long new)
762 return atomic_long_add_return(new - old, &user->pipe_bufs);
765 bool too_many_pipe_buffers_soft(unsigned long user_bufs)
767 unsigned long soft_limit = READ_ONCE(pipe_user_pages_soft);
769 return soft_limit && user_bufs > soft_limit;
772 bool too_many_pipe_buffers_hard(unsigned long user_bufs)
774 unsigned long hard_limit = READ_ONCE(pipe_user_pages_hard);
776 return hard_limit && user_bufs > hard_limit;
779 bool pipe_is_unprivileged_user(void)
781 return !capable(CAP_SYS_RESOURCE) && !capable(CAP_SYS_ADMIN);
784 struct pipe_inode_info *alloc_pipe_info(void)
786 struct pipe_inode_info *pipe;
787 unsigned long pipe_bufs = PIPE_DEF_BUFFERS;
788 struct user_struct *user = get_current_user();
789 unsigned long user_bufs;
790 unsigned int max_size = READ_ONCE(pipe_max_size);
792 pipe = kzalloc(sizeof(struct pipe_inode_info), GFP_KERNEL_ACCOUNT);
796 if (pipe_bufs * PAGE_SIZE > max_size && !capable(CAP_SYS_RESOURCE))
797 pipe_bufs = max_size >> PAGE_SHIFT;
799 user_bufs = account_pipe_buffers(user, 0, pipe_bufs);
801 if (too_many_pipe_buffers_soft(user_bufs) && pipe_is_unprivileged_user()) {
802 user_bufs = account_pipe_buffers(user, pipe_bufs, PIPE_MIN_DEF_BUFFERS);
803 pipe_bufs = PIPE_MIN_DEF_BUFFERS;
806 if (too_many_pipe_buffers_hard(user_bufs) && pipe_is_unprivileged_user())
807 goto out_revert_acct;
809 pipe->bufs = kcalloc(pipe_bufs, sizeof(struct pipe_buffer),
813 init_waitqueue_head(&pipe->rd_wait);
814 init_waitqueue_head(&pipe->wr_wait);
815 pipe->r_counter = pipe->w_counter = 1;
816 pipe->max_usage = pipe_bufs;
817 pipe->ring_size = pipe_bufs;
818 pipe->nr_accounted = pipe_bufs;
820 mutex_init(&pipe->mutex);
825 (void) account_pipe_buffers(user, pipe_bufs, 0);
832 void free_pipe_info(struct pipe_inode_info *pipe)
836 #ifdef CONFIG_WATCH_QUEUE
837 if (pipe->watch_queue)
838 watch_queue_clear(pipe->watch_queue);
841 (void) account_pipe_buffers(pipe->user, pipe->nr_accounted, 0);
842 free_uid(pipe->user);
843 for (i = 0; i < pipe->ring_size; i++) {
844 struct pipe_buffer *buf = pipe->bufs + i;
846 pipe_buf_release(pipe, buf);
848 #ifdef CONFIG_WATCH_QUEUE
849 if (pipe->watch_queue)
850 put_watch_queue(pipe->watch_queue);
853 __free_page(pipe->tmp_page);
858 static struct vfsmount *pipe_mnt __read_mostly;
861 * pipefs_dname() is called from d_path().
863 static char *pipefs_dname(struct dentry *dentry, char *buffer, int buflen)
865 return dynamic_dname(buffer, buflen, "pipe:[%lu]",
866 d_inode(dentry)->i_ino);
869 static const struct dentry_operations pipefs_dentry_operations = {
870 .d_dname = pipefs_dname,
873 static struct inode * get_pipe_inode(void)
875 struct inode *inode = new_inode_pseudo(pipe_mnt->mnt_sb);
876 struct pipe_inode_info *pipe;
881 inode->i_ino = get_next_ino();
883 pipe = alloc_pipe_info();
887 inode->i_pipe = pipe;
889 pipe->readers = pipe->writers = 1;
890 inode->i_fop = &pipefifo_fops;
893 * Mark the inode dirty from the very beginning,
894 * that way it will never be moved to the dirty
895 * list because "mark_inode_dirty()" will think
896 * that it already _is_ on the dirty list.
898 inode->i_state = I_DIRTY;
899 inode->i_mode = S_IFIFO | S_IRUSR | S_IWUSR;
900 inode->i_uid = current_fsuid();
901 inode->i_gid = current_fsgid();
902 inode->i_atime = inode->i_mtime = inode_set_ctime_current(inode);
913 int create_pipe_files(struct file **res, int flags)
915 struct inode *inode = get_pipe_inode();
922 if (flags & O_NOTIFICATION_PIPE) {
923 error = watch_queue_init(inode->i_pipe);
925 free_pipe_info(inode->i_pipe);
931 f = alloc_file_pseudo(inode, pipe_mnt, "",
932 O_WRONLY | (flags & (O_NONBLOCK | O_DIRECT)),
935 free_pipe_info(inode->i_pipe);
940 f->private_data = inode->i_pipe;
942 res[0] = alloc_file_clone(f, O_RDONLY | (flags & O_NONBLOCK),
944 if (IS_ERR(res[0])) {
945 put_pipe_info(inode, inode->i_pipe);
947 return PTR_ERR(res[0]);
949 res[0]->private_data = inode->i_pipe;
951 stream_open(inode, res[0]);
952 stream_open(inode, res[1]);
956 static int __do_pipe_flags(int *fd, struct file **files, int flags)
961 if (flags & ~(O_CLOEXEC | O_NONBLOCK | O_DIRECT | O_NOTIFICATION_PIPE))
964 error = create_pipe_files(files, flags);
968 error = get_unused_fd_flags(flags);
973 error = get_unused_fd_flags(flags);
978 audit_fd_pair(fdr, fdw);
981 /* pipe groks IOCB_NOWAIT */
982 files[0]->f_mode |= FMODE_NOWAIT;
983 files[1]->f_mode |= FMODE_NOWAIT;
994 int do_pipe_flags(int *fd, int flags)
996 struct file *files[2];
997 int error = __do_pipe_flags(fd, files, flags);
999 fd_install(fd[0], files[0]);
1000 fd_install(fd[1], files[1]);
1006 * sys_pipe() is the normal C calling standard for creating
1007 * a pipe. It's not the way Unix traditionally does this, though.
1009 static int do_pipe2(int __user *fildes, int flags)
1011 struct file *files[2];
1015 error = __do_pipe_flags(fd, files, flags);
1017 if (unlikely(copy_to_user(fildes, fd, sizeof(fd)))) {
1020 put_unused_fd(fd[0]);
1021 put_unused_fd(fd[1]);
1024 fd_install(fd[0], files[0]);
1025 fd_install(fd[1], files[1]);
1031 SYSCALL_DEFINE2(pipe2, int __user *, fildes, int, flags)
1033 return do_pipe2(fildes, flags);
1036 SYSCALL_DEFINE1(pipe, int __user *, fildes)
1038 return do_pipe2(fildes, 0);
1042 * This is the stupid "wait for pipe to be readable or writable"
1045 * See pipe_read/write() for the proper kind of exclusive wait,
1046 * but that requires that we wake up any other readers/writers
1047 * if we then do not end up reading everything (ie the whole
1048 * "wake_next_reader/writer" logic in pipe_read/write()).
1050 void pipe_wait_readable(struct pipe_inode_info *pipe)
1053 wait_event_interruptible(pipe->rd_wait, pipe_readable(pipe));
1057 void pipe_wait_writable(struct pipe_inode_info *pipe)
1060 wait_event_interruptible(pipe->wr_wait, pipe_writable(pipe));
1065 * This depends on both the wait (here) and the wakeup (wake_up_partner)
1066 * holding the pipe lock, so "*cnt" is stable and we know a wakeup cannot
1067 * race with the count check and waitqueue prep.
1069 * Normally in order to avoid races, you'd do the prepare_to_wait() first,
1070 * then check the condition you're waiting for, and only then sleep. But
1071 * because of the pipe lock, we can check the condition before being on
1074 * We use the 'rd_wait' waitqueue for pipe partner waiting.
1076 static int wait_for_partner(struct pipe_inode_info *pipe, unsigned int *cnt)
1078 DEFINE_WAIT(rdwait);
1081 while (cur == *cnt) {
1082 prepare_to_wait(&pipe->rd_wait, &rdwait, TASK_INTERRUPTIBLE);
1085 finish_wait(&pipe->rd_wait, &rdwait);
1087 if (signal_pending(current))
1090 return cur == *cnt ? -ERESTARTSYS : 0;
1093 static void wake_up_partner(struct pipe_inode_info *pipe)
1095 wake_up_interruptible_all(&pipe->rd_wait);
1098 static int fifo_open(struct inode *inode, struct file *filp)
1100 struct pipe_inode_info *pipe;
1101 bool is_pipe = inode->i_sb->s_magic == PIPEFS_MAGIC;
1104 filp->f_version = 0;
1106 spin_lock(&inode->i_lock);
1107 if (inode->i_pipe) {
1108 pipe = inode->i_pipe;
1110 spin_unlock(&inode->i_lock);
1112 spin_unlock(&inode->i_lock);
1113 pipe = alloc_pipe_info();
1117 spin_lock(&inode->i_lock);
1118 if (unlikely(inode->i_pipe)) {
1119 inode->i_pipe->files++;
1120 spin_unlock(&inode->i_lock);
1121 free_pipe_info(pipe);
1122 pipe = inode->i_pipe;
1124 inode->i_pipe = pipe;
1125 spin_unlock(&inode->i_lock);
1128 filp->private_data = pipe;
1129 /* OK, we have a pipe and it's pinned down */
1133 /* We can only do regular read/write on fifos */
1134 stream_open(inode, filp);
1136 switch (filp->f_mode & (FMODE_READ | FMODE_WRITE)) {
1140 * POSIX.1 says that O_NONBLOCK means return with the FIFO
1141 * opened, even when there is no process writing the FIFO.
1144 if (pipe->readers++ == 0)
1145 wake_up_partner(pipe);
1147 if (!is_pipe && !pipe->writers) {
1148 if ((filp->f_flags & O_NONBLOCK)) {
1149 /* suppress EPOLLHUP until we have
1151 filp->f_version = pipe->w_counter;
1153 if (wait_for_partner(pipe, &pipe->w_counter))
1162 * POSIX.1 says that O_NONBLOCK means return -1 with
1163 * errno=ENXIO when there is no process reading the FIFO.
1166 if (!is_pipe && (filp->f_flags & O_NONBLOCK) && !pipe->readers)
1170 if (!pipe->writers++)
1171 wake_up_partner(pipe);
1173 if (!is_pipe && !pipe->readers) {
1174 if (wait_for_partner(pipe, &pipe->r_counter))
1179 case FMODE_READ | FMODE_WRITE:
1182 * POSIX.1 leaves this case "undefined" when O_NONBLOCK is set.
1183 * This implementation will NEVER block on a O_RDWR open, since
1184 * the process can at least talk to itself.
1191 if (pipe->readers == 1 || pipe->writers == 1)
1192 wake_up_partner(pipe);
1201 __pipe_unlock(pipe);
1205 if (!--pipe->readers)
1206 wake_up_interruptible(&pipe->wr_wait);
1211 if (!--pipe->writers)
1212 wake_up_interruptible_all(&pipe->rd_wait);
1217 __pipe_unlock(pipe);
1219 put_pipe_info(inode, pipe);
1223 const struct file_operations pipefifo_fops = {
1225 .llseek = no_llseek,
1226 .read_iter = pipe_read,
1227 .write_iter = pipe_write,
1229 .unlocked_ioctl = pipe_ioctl,
1230 .release = pipe_release,
1231 .fasync = pipe_fasync,
1232 .splice_write = iter_file_splice_write,
1236 * Currently we rely on the pipe array holding a power-of-2 number
1237 * of pages. Returns 0 on error.
1239 unsigned int round_pipe_size(unsigned int size)
1241 if (size > (1U << 31))
1244 /* Minimum pipe size, as required by POSIX */
1245 if (size < PAGE_SIZE)
1248 return roundup_pow_of_two(size);
1252 * Resize the pipe ring to a number of slots.
1254 * Note the pipe can be reduced in capacity, but only if the current
1255 * occupancy doesn't exceed nr_slots; if it does, EBUSY will be
1258 int pipe_resize_ring(struct pipe_inode_info *pipe, unsigned int nr_slots)
1260 struct pipe_buffer *bufs;
1261 unsigned int head, tail, mask, n;
1263 bufs = kcalloc(nr_slots, sizeof(*bufs),
1264 GFP_KERNEL_ACCOUNT | __GFP_NOWARN);
1265 if (unlikely(!bufs))
1268 spin_lock_irq(&pipe->rd_wait.lock);
1269 mask = pipe->ring_size - 1;
1273 n = pipe_occupancy(head, tail);
1275 spin_unlock_irq(&pipe->rd_wait.lock);
1281 * The pipe array wraps around, so just start the new one at zero
1282 * and adjust the indices.
1285 unsigned int h = head & mask;
1286 unsigned int t = tail & mask;
1288 memcpy(bufs, pipe->bufs + t,
1289 n * sizeof(struct pipe_buffer));
1291 unsigned int tsize = pipe->ring_size - t;
1293 memcpy(bufs + tsize, pipe->bufs,
1294 h * sizeof(struct pipe_buffer));
1295 memcpy(bufs, pipe->bufs + t,
1296 tsize * sizeof(struct pipe_buffer));
1305 pipe->ring_size = nr_slots;
1306 if (pipe->max_usage > nr_slots)
1307 pipe->max_usage = nr_slots;
1311 spin_unlock_irq(&pipe->rd_wait.lock);
1313 /* This might have made more room for writers */
1314 wake_up_interruptible(&pipe->wr_wait);
1319 * Allocate a new array of pipe buffers and copy the info over. Returns the
1320 * pipe size if successful, or return -ERROR on error.
1322 static long pipe_set_size(struct pipe_inode_info *pipe, unsigned int arg)
1324 unsigned long user_bufs;
1325 unsigned int nr_slots, size;
1328 #ifdef CONFIG_WATCH_QUEUE
1329 if (pipe->watch_queue)
1333 size = round_pipe_size(arg);
1334 nr_slots = size >> PAGE_SHIFT;
1340 * If trying to increase the pipe capacity, check that an
1341 * unprivileged user is not trying to exceed various limits
1342 * (soft limit check here, hard limit check just below).
1343 * Decreasing the pipe capacity is always permitted, even
1344 * if the user is currently over a limit.
1346 if (nr_slots > pipe->max_usage &&
1347 size > pipe_max_size && !capable(CAP_SYS_RESOURCE))
1350 user_bufs = account_pipe_buffers(pipe->user, pipe->nr_accounted, nr_slots);
1352 if (nr_slots > pipe->max_usage &&
1353 (too_many_pipe_buffers_hard(user_bufs) ||
1354 too_many_pipe_buffers_soft(user_bufs)) &&
1355 pipe_is_unprivileged_user()) {
1357 goto out_revert_acct;
1360 ret = pipe_resize_ring(pipe, nr_slots);
1362 goto out_revert_acct;
1364 pipe->max_usage = nr_slots;
1365 pipe->nr_accounted = nr_slots;
1366 return pipe->max_usage * PAGE_SIZE;
1369 (void) account_pipe_buffers(pipe->user, nr_slots, pipe->nr_accounted);
1374 * Note that i_pipe and i_cdev share the same location, so checking ->i_pipe is
1375 * not enough to verify that this is a pipe.
1377 struct pipe_inode_info *get_pipe_info(struct file *file, bool for_splice)
1379 struct pipe_inode_info *pipe = file->private_data;
1381 if (file->f_op != &pipefifo_fops || !pipe)
1383 #ifdef CONFIG_WATCH_QUEUE
1384 if (for_splice && pipe->watch_queue)
1390 long pipe_fcntl(struct file *file, unsigned int cmd, unsigned int arg)
1392 struct pipe_inode_info *pipe;
1395 pipe = get_pipe_info(file, false);
1403 ret = pipe_set_size(pipe, arg);
1406 ret = pipe->max_usage * PAGE_SIZE;
1413 __pipe_unlock(pipe);
1417 static const struct super_operations pipefs_ops = {
1418 .destroy_inode = free_inode_nonrcu,
1419 .statfs = simple_statfs,
1423 * pipefs should _never_ be mounted by userland - too much of security hassle,
1424 * no real gain from having the whole whorehouse mounted. So we don't need
1425 * any operations on the root directory. However, we need a non-trivial
1426 * d_name - pipe: will go nicely and kill the special-casing in procfs.
1429 static int pipefs_init_fs_context(struct fs_context *fc)
1431 struct pseudo_fs_context *ctx = init_pseudo(fc, PIPEFS_MAGIC);
1434 ctx->ops = &pipefs_ops;
1435 ctx->dops = &pipefs_dentry_operations;
1439 static struct file_system_type pipe_fs_type = {
1441 .init_fs_context = pipefs_init_fs_context,
1442 .kill_sb = kill_anon_super,
1445 #ifdef CONFIG_SYSCTL
1446 static int do_proc_dopipe_max_size_conv(unsigned long *lvalp,
1448 int write, void *data)
1453 val = round_pipe_size(*lvalp);
1459 unsigned int val = *valp;
1460 *lvalp = (unsigned long) val;
1466 static int proc_dopipe_max_size(struct ctl_table *table, int write,
1467 void *buffer, size_t *lenp, loff_t *ppos)
1469 return do_proc_douintvec(table, write, buffer, lenp, ppos,
1470 do_proc_dopipe_max_size_conv, NULL);
1473 static struct ctl_table fs_pipe_sysctls[] = {
1475 .procname = "pipe-max-size",
1476 .data = &pipe_max_size,
1477 .maxlen = sizeof(pipe_max_size),
1479 .proc_handler = proc_dopipe_max_size,
1482 .procname = "pipe-user-pages-hard",
1483 .data = &pipe_user_pages_hard,
1484 .maxlen = sizeof(pipe_user_pages_hard),
1486 .proc_handler = proc_doulongvec_minmax,
1489 .procname = "pipe-user-pages-soft",
1490 .data = &pipe_user_pages_soft,
1491 .maxlen = sizeof(pipe_user_pages_soft),
1493 .proc_handler = proc_doulongvec_minmax,
1499 static int __init init_pipe_fs(void)
1501 int err = register_filesystem(&pipe_fs_type);
1504 pipe_mnt = kern_mount(&pipe_fs_type);
1505 if (IS_ERR(pipe_mnt)) {
1506 err = PTR_ERR(pipe_mnt);
1507 unregister_filesystem(&pipe_fs_type);
1510 #ifdef CONFIG_SYSCTL
1511 register_sysctl_init("fs", fs_pipe_sysctls);
1516 fs_initcall(init_pipe_fs);