4 * Copyright (C) 2002, Linus Torvalds.
6 * Contains all the functions related to writing back and waiting
7 * upon dirty inodes against superblocks, and writing back dirty
8 * pages against inodes. ie: data writeback. Writeout of the
9 * inode itself is not handled here.
11 * 10Apr2002 Andrew Morton
12 * Split out of fs/inode.c
13 * Additions for address_space-based writeback
16 #include <linux/kernel.h>
17 #include <linux/export.h>
18 #include <linux/spinlock.h>
19 #include <linux/slab.h>
20 #include <linux/sched.h>
23 #include <linux/pagemap.h>
24 #include <linux/kthread.h>
25 #include <linux/freezer.h>
26 #include <linux/writeback.h>
27 #include <linux/blkdev.h>
28 #include <linux/backing-dev.h>
29 #include <linux/tracepoint.h>
33 * 4MB minimal write chunk size
35 #define MIN_WRITEBACK_PAGES (4096UL >> (PAGE_CACHE_SHIFT - 10))
38 * Passed into wb_writeback(), essentially a subset of writeback_control
40 struct wb_writeback_work {
42 struct super_block *sb;
43 unsigned long *older_than_this;
44 enum writeback_sync_modes sync_mode;
45 unsigned int tagged_writepages:1;
46 unsigned int for_kupdate:1;
47 unsigned int range_cyclic:1;
48 unsigned int for_background:1;
49 enum wb_reason reason; /* why was writeback initiated? */
51 struct list_head list; /* pending work list */
52 struct completion *done; /* set if the caller waits */
56 * writeback_in_progress - determine whether there is writeback in progress
57 * @bdi: the device's backing_dev_info structure.
59 * Determine whether there is writeback waiting to be handled against a
62 int writeback_in_progress(struct backing_dev_info *bdi)
64 return test_bit(BDI_writeback_running, &bdi->state);
67 static inline struct backing_dev_info *inode_to_bdi(struct inode *inode)
69 struct super_block *sb = inode->i_sb;
71 if (strcmp(sb->s_type->name, "bdev") == 0)
72 return inode->i_mapping->backing_dev_info;
77 static inline struct inode *wb_inode(struct list_head *head)
79 return list_entry(head, struct inode, i_wb_list);
83 * Include the creation of the trace points after defining the
84 * wb_writeback_work structure and inline functions so that the definition
85 * remains local to this file.
87 #define CREATE_TRACE_POINTS
88 #include <trace/events/writeback.h>
90 /* Wakeup flusher thread or forker thread to fork it. Requires bdi->wb_lock. */
91 static void bdi_wakeup_flusher(struct backing_dev_info *bdi)
94 wake_up_process(bdi->wb.task);
97 * The bdi thread isn't there, wake up the forker thread which
98 * will create and run it.
100 wake_up_process(default_backing_dev_info.wb.task);
104 static void bdi_queue_work(struct backing_dev_info *bdi,
105 struct wb_writeback_work *work)
107 trace_writeback_queue(bdi, work);
109 spin_lock_bh(&bdi->wb_lock);
110 list_add_tail(&work->list, &bdi->work_list);
112 trace_writeback_nothread(bdi, work);
113 bdi_wakeup_flusher(bdi);
114 spin_unlock_bh(&bdi->wb_lock);
118 __bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages,
119 bool range_cyclic, enum wb_reason reason)
121 struct wb_writeback_work *work;
124 * This is WB_SYNC_NONE writeback, so if allocation fails just
125 * wakeup the thread for old dirty data writeback
127 work = kzalloc(sizeof(*work), GFP_ATOMIC);
130 trace_writeback_nowork(bdi);
131 wake_up_process(bdi->wb.task);
136 work->sync_mode = WB_SYNC_NONE;
137 work->nr_pages = nr_pages;
138 work->range_cyclic = range_cyclic;
139 work->reason = reason;
141 bdi_queue_work(bdi, work);
145 * bdi_start_writeback - start writeback
146 * @bdi: the backing device to write from
147 * @nr_pages: the number of pages to write
148 * @reason: reason why some writeback work was initiated
151 * This does WB_SYNC_NONE opportunistic writeback. The IO is only
152 * started when this function returns, we make no guarantees on
153 * completion. Caller need not hold sb s_umount semaphore.
156 void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages,
157 enum wb_reason reason)
159 __bdi_start_writeback(bdi, nr_pages, true, reason);
163 * bdi_start_background_writeback - start background writeback
164 * @bdi: the backing device to write from
167 * This makes sure WB_SYNC_NONE background writeback happens. When
168 * this function returns, it is only guaranteed that for given BDI
169 * some IO is happening if we are over background dirty threshold.
170 * Caller need not hold sb s_umount semaphore.
172 void bdi_start_background_writeback(struct backing_dev_info *bdi)
175 * We just wake up the flusher thread. It will perform background
176 * writeback as soon as there is no other work to do.
178 trace_writeback_wake_background(bdi);
179 spin_lock_bh(&bdi->wb_lock);
180 bdi_wakeup_flusher(bdi);
181 spin_unlock_bh(&bdi->wb_lock);
185 * Remove the inode from the writeback list it is on.
187 void inode_wb_list_del(struct inode *inode)
189 struct backing_dev_info *bdi = inode_to_bdi(inode);
191 spin_lock(&bdi->wb.list_lock);
192 list_del_init(&inode->i_wb_list);
193 spin_unlock(&bdi->wb.list_lock);
197 * Redirty an inode: set its when-it-was dirtied timestamp and move it to the
198 * furthest end of its superblock's dirty-inode list.
200 * Before stamping the inode's ->dirtied_when, we check to see whether it is
201 * already the most-recently-dirtied inode on the b_dirty list. If that is
202 * the case then the inode must have been redirtied while it was being written
203 * out and we don't reset its dirtied_when.
205 static void redirty_tail(struct inode *inode, struct bdi_writeback *wb)
207 assert_spin_locked(&wb->list_lock);
208 if (!list_empty(&wb->b_dirty)) {
211 tail = wb_inode(wb->b_dirty.next);
212 if (time_before(inode->dirtied_when, tail->dirtied_when))
213 inode->dirtied_when = jiffies;
215 list_move(&inode->i_wb_list, &wb->b_dirty);
219 * requeue inode for re-scanning after bdi->b_io list is exhausted.
221 static void requeue_io(struct inode *inode, struct bdi_writeback *wb)
223 assert_spin_locked(&wb->list_lock);
224 list_move(&inode->i_wb_list, &wb->b_more_io);
227 static void inode_sync_complete(struct inode *inode)
229 inode->i_state &= ~I_SYNC;
230 /* Waiters must see I_SYNC cleared before being woken up */
232 wake_up_bit(&inode->i_state, __I_SYNC);
235 static bool inode_dirtied_after(struct inode *inode, unsigned long t)
237 bool ret = time_after(inode->dirtied_when, t);
240 * For inodes being constantly redirtied, dirtied_when can get stuck.
241 * It _appears_ to be in the future, but is actually in distant past.
242 * This test is necessary to prevent such wrapped-around relative times
243 * from permanently stopping the whole bdi writeback.
245 ret = ret && time_before_eq(inode->dirtied_when, jiffies);
251 * Move expired (dirtied after work->older_than_this) dirty inodes from
252 * @delaying_queue to @dispatch_queue.
254 static int move_expired_inodes(struct list_head *delaying_queue,
255 struct list_head *dispatch_queue,
256 struct wb_writeback_work *work)
259 struct list_head *pos, *node;
260 struct super_block *sb = NULL;
265 while (!list_empty(delaying_queue)) {
266 inode = wb_inode(delaying_queue->prev);
267 if (work->older_than_this &&
268 inode_dirtied_after(inode, *work->older_than_this))
270 if (sb && sb != inode->i_sb)
273 list_move(&inode->i_wb_list, &tmp);
277 /* just one sb in list, splice to dispatch_queue and we're done */
279 list_splice(&tmp, dispatch_queue);
283 /* Move inodes from one superblock together */
284 while (!list_empty(&tmp)) {
285 sb = wb_inode(tmp.prev)->i_sb;
286 list_for_each_prev_safe(pos, node, &tmp) {
287 inode = wb_inode(pos);
288 if (inode->i_sb == sb)
289 list_move(&inode->i_wb_list, dispatch_queue);
297 * Queue all expired dirty inodes for io, eldest first.
299 * newly dirtied b_dirty b_io b_more_io
300 * =============> gf edc BA
302 * newly dirtied b_dirty b_io b_more_io
303 * =============> g fBAedc
305 * +--> dequeue for IO
307 static void queue_io(struct bdi_writeback *wb, struct wb_writeback_work *work)
310 assert_spin_locked(&wb->list_lock);
311 list_splice_init(&wb->b_more_io, &wb->b_io);
312 moved = move_expired_inodes(&wb->b_dirty, &wb->b_io, work);
313 trace_writeback_queue_io(wb, work, moved);
316 static int write_inode(struct inode *inode, struct writeback_control *wbc)
318 if (inode->i_sb->s_op->write_inode && !is_bad_inode(inode))
319 return inode->i_sb->s_op->write_inode(inode, wbc);
324 * Wait for writeback on an inode to complete. Called with i_lock held.
325 * Caller must make sure inode cannot go away when we drop i_lock.
327 static void __inode_wait_for_writeback(struct inode *inode)
328 __releases(inode->i_lock)
329 __acquires(inode->i_lock)
331 DEFINE_WAIT_BIT(wq, &inode->i_state, __I_SYNC);
332 wait_queue_head_t *wqh;
334 wqh = bit_waitqueue(&inode->i_state, __I_SYNC);
335 while (inode->i_state & I_SYNC) {
336 spin_unlock(&inode->i_lock);
337 __wait_on_bit(wqh, &wq, inode_wait, TASK_UNINTERRUPTIBLE);
338 spin_lock(&inode->i_lock);
343 * Wait for writeback on an inode to complete. Caller must have inode pinned.
345 void inode_wait_for_writeback(struct inode *inode)
347 spin_lock(&inode->i_lock);
348 __inode_wait_for_writeback(inode);
349 spin_unlock(&inode->i_lock);
353 * Sleep until I_SYNC is cleared. This function must be called with i_lock
354 * held and drops it. It is aimed for callers not holding any inode reference
355 * so once i_lock is dropped, inode can go away.
357 static void inode_sleep_on_writeback(struct inode *inode)
358 __releases(inode->i_lock)
361 wait_queue_head_t *wqh = bit_waitqueue(&inode->i_state, __I_SYNC);
364 prepare_to_wait(wqh, &wait, TASK_UNINTERRUPTIBLE);
365 sleep = inode->i_state & I_SYNC;
366 spin_unlock(&inode->i_lock);
369 finish_wait(wqh, &wait);
373 * Find proper writeback list for the inode depending on its current state and
374 * possibly also change of its state while we were doing writeback. Here we
375 * handle things such as livelock prevention or fairness of writeback among
376 * inodes. This function can be called only by flusher thread - noone else
377 * processes all inodes in writeback lists and requeueing inodes behind flusher
378 * thread's back can have unexpected consequences.
380 static void requeue_inode(struct inode *inode, struct bdi_writeback *wb,
381 struct writeback_control *wbc)
383 if (inode->i_state & I_FREEING)
387 * Sync livelock prevention. Each inode is tagged and synced in one
388 * shot. If still dirty, it will be redirty_tail()'ed below. Update
389 * the dirty time to prevent enqueue and sync it again.
391 if ((inode->i_state & I_DIRTY) &&
392 (wbc->sync_mode == WB_SYNC_ALL || wbc->tagged_writepages))
393 inode->dirtied_when = jiffies;
395 if (wbc->pages_skipped) {
397 * writeback is not making progress due to locked
398 * buffers. Skip this inode for now.
400 redirty_tail(inode, wb);
404 if (mapping_tagged(inode->i_mapping, PAGECACHE_TAG_DIRTY)) {
406 * We didn't write back all the pages. nfs_writepages()
407 * sometimes bales out without doing anything.
409 if (wbc->nr_to_write <= 0) {
410 /* Slice used up. Queue for next turn. */
411 requeue_io(inode, wb);
414 * Writeback blocked by something other than
415 * congestion. Delay the inode for some time to
416 * avoid spinning on the CPU (100% iowait)
417 * retrying writeback of the dirty page/inode
418 * that cannot be performed immediately.
420 redirty_tail(inode, wb);
422 } else if (inode->i_state & I_DIRTY) {
424 * Filesystems can dirty the inode during writeback operations,
425 * such as delayed allocation during submission or metadata
426 * updates after data IO completion.
428 redirty_tail(inode, wb);
430 /* The inode is clean. Remove from writeback lists. */
431 list_del_init(&inode->i_wb_list);
436 * Write out an inode and its dirty pages. Do not update the writeback list
437 * linkage. That is left to the caller. The caller is also responsible for
438 * setting I_SYNC flag and calling inode_sync_complete() to clear it.
441 __writeback_single_inode(struct inode *inode, struct bdi_writeback *wb,
442 struct writeback_control *wbc)
444 struct address_space *mapping = inode->i_mapping;
445 long nr_to_write = wbc->nr_to_write;
449 WARN_ON(!(inode->i_state & I_SYNC));
451 ret = do_writepages(mapping, wbc);
454 * Make sure to wait on the data before writing out the metadata.
455 * This is important for filesystems that modify metadata on data
458 if (wbc->sync_mode == WB_SYNC_ALL) {
459 int err = filemap_fdatawait(mapping);
465 * Some filesystems may redirty the inode during the writeback
466 * due to delalloc, clear dirty metadata flags right before
469 spin_lock(&inode->i_lock);
470 /* Clear I_DIRTY_PAGES if we've written out all dirty pages */
471 if (!mapping_tagged(mapping, PAGECACHE_TAG_DIRTY))
472 inode->i_state &= ~I_DIRTY_PAGES;
473 dirty = inode->i_state & I_DIRTY;
474 inode->i_state &= ~(I_DIRTY_SYNC | I_DIRTY_DATASYNC);
475 spin_unlock(&inode->i_lock);
476 /* Don't write the inode if only I_DIRTY_PAGES was set */
477 if (dirty & (I_DIRTY_SYNC | I_DIRTY_DATASYNC)) {
478 int err = write_inode(inode, wbc);
482 trace_writeback_single_inode(inode, wbc, nr_to_write);
487 * Write out an inode's dirty pages. Either the caller has an active reference
488 * on the inode or the inode has I_WILL_FREE set.
490 * This function is designed to be called for writing back one inode which
491 * we go e.g. from filesystem. Flusher thread uses __writeback_single_inode()
492 * and does more profound writeback list handling in writeback_sb_inodes().
495 writeback_single_inode(struct inode *inode, struct bdi_writeback *wb,
496 struct writeback_control *wbc)
500 spin_lock(&inode->i_lock);
501 if (!atomic_read(&inode->i_count))
502 WARN_ON(!(inode->i_state & (I_WILL_FREE|I_FREEING)));
504 WARN_ON(inode->i_state & I_WILL_FREE);
506 if (inode->i_state & I_SYNC) {
507 if (wbc->sync_mode != WB_SYNC_ALL)
510 * It's a data-integrity sync. We must wait. Since callers hold
511 * inode reference or inode has I_WILL_FREE set, it cannot go
514 __inode_wait_for_writeback(inode);
516 WARN_ON(inode->i_state & I_SYNC);
518 * Skip inode if it is clean. We don't want to mess with writeback
519 * lists in this function since flusher thread may be doing for example
520 * sync in parallel and if we move the inode, it could get skipped. So
521 * here we make sure inode is on some writeback list and leave it there
522 * unless we have completely cleaned the inode.
524 if (!(inode->i_state & I_DIRTY))
526 inode->i_state |= I_SYNC;
527 spin_unlock(&inode->i_lock);
529 ret = __writeback_single_inode(inode, wb, wbc);
531 spin_lock(&wb->list_lock);
532 spin_lock(&inode->i_lock);
534 * If inode is clean, remove it from writeback lists. Otherwise don't
535 * touch it. See comment above for explanation.
537 if (!(inode->i_state & I_DIRTY))
538 list_del_init(&inode->i_wb_list);
539 spin_unlock(&wb->list_lock);
540 inode_sync_complete(inode);
542 spin_unlock(&inode->i_lock);
546 static long writeback_chunk_size(struct backing_dev_info *bdi,
547 struct wb_writeback_work *work)
552 * WB_SYNC_ALL mode does livelock avoidance by syncing dirty
553 * inodes/pages in one big loop. Setting wbc.nr_to_write=LONG_MAX
554 * here avoids calling into writeback_inodes_wb() more than once.
556 * The intended call sequence for WB_SYNC_ALL writeback is:
559 * writeback_sb_inodes() <== called only once
560 * write_cache_pages() <== called once for each inode
561 * (quickly) tag currently dirty pages
562 * (maybe slowly) sync all tagged pages
564 if (work->sync_mode == WB_SYNC_ALL || work->tagged_writepages)
567 pages = min(bdi->avg_write_bandwidth / 2,
568 global_dirty_limit / DIRTY_SCOPE);
569 pages = min(pages, work->nr_pages);
570 pages = round_down(pages + MIN_WRITEBACK_PAGES,
571 MIN_WRITEBACK_PAGES);
578 * Write a portion of b_io inodes which belong to @sb.
580 * If @only_this_sb is true, then find and write all such
581 * inodes. Otherwise write only ones which go sequentially
584 * Return the number of pages and/or inodes written.
586 static long writeback_sb_inodes(struct super_block *sb,
587 struct bdi_writeback *wb,
588 struct wb_writeback_work *work)
590 struct writeback_control wbc = {
591 .sync_mode = work->sync_mode,
592 .tagged_writepages = work->tagged_writepages,
593 .for_kupdate = work->for_kupdate,
594 .for_background = work->for_background,
595 .range_cyclic = work->range_cyclic,
597 .range_end = LLONG_MAX,
599 unsigned long start_time = jiffies;
601 long wrote = 0; /* count both pages and inodes */
603 while (!list_empty(&wb->b_io)) {
604 struct inode *inode = wb_inode(wb->b_io.prev);
606 if (inode->i_sb != sb) {
609 * We only want to write back data for this
610 * superblock, move all inodes not belonging
611 * to it back onto the dirty list.
613 redirty_tail(inode, wb);
618 * The inode belongs to a different superblock.
619 * Bounce back to the caller to unpin this and
620 * pin the next superblock.
626 * Don't bother with new inodes or inodes being freed, first
627 * kind does not need periodic writeout yet, and for the latter
628 * kind writeout is handled by the freer.
630 spin_lock(&inode->i_lock);
631 if (inode->i_state & (I_NEW | I_FREEING | I_WILL_FREE)) {
632 spin_unlock(&inode->i_lock);
633 redirty_tail(inode, wb);
636 if ((inode->i_state & I_SYNC) && wbc.sync_mode != WB_SYNC_ALL) {
638 * If this inode is locked for writeback and we are not
639 * doing writeback-for-data-integrity, move it to
640 * b_more_io so that writeback can proceed with the
641 * other inodes on s_io.
643 * We'll have another go at writing back this inode
644 * when we completed a full scan of b_io.
646 spin_unlock(&inode->i_lock);
647 requeue_io(inode, wb);
648 trace_writeback_sb_inodes_requeue(inode);
651 spin_unlock(&wb->list_lock);
654 * We already requeued the inode if it had I_SYNC set and we
655 * are doing WB_SYNC_NONE writeback. So this catches only the
658 if (inode->i_state & I_SYNC) {
659 /* Wait for I_SYNC. This function drops i_lock... */
660 inode_sleep_on_writeback(inode);
661 /* Inode may be gone, start again */
662 spin_lock(&wb->list_lock);
665 inode->i_state |= I_SYNC;
666 spin_unlock(&inode->i_lock);
668 write_chunk = writeback_chunk_size(wb->bdi, work);
669 wbc.nr_to_write = write_chunk;
670 wbc.pages_skipped = 0;
673 * We use I_SYNC to pin the inode in memory. While it is set
674 * evict_inode() will wait so the inode cannot be freed.
676 __writeback_single_inode(inode, wb, &wbc);
678 work->nr_pages -= write_chunk - wbc.nr_to_write;
679 wrote += write_chunk - wbc.nr_to_write;
680 spin_lock(&wb->list_lock);
681 spin_lock(&inode->i_lock);
682 if (!(inode->i_state & I_DIRTY))
684 requeue_inode(inode, wb, &wbc);
685 inode_sync_complete(inode);
686 spin_unlock(&inode->i_lock);
687 cond_resched_lock(&wb->list_lock);
689 * bail out to wb_writeback() often enough to check
690 * background threshold and other termination conditions.
693 if (time_is_before_jiffies(start_time + HZ / 10UL))
695 if (work->nr_pages <= 0)
702 static long __writeback_inodes_wb(struct bdi_writeback *wb,
703 struct wb_writeback_work *work)
705 unsigned long start_time = jiffies;
708 while (!list_empty(&wb->b_io)) {
709 struct inode *inode = wb_inode(wb->b_io.prev);
710 struct super_block *sb = inode->i_sb;
712 if (!grab_super_passive(sb)) {
714 * grab_super_passive() may fail consistently due to
715 * s_umount being grabbed by someone else. Don't use
716 * requeue_io() to avoid busy retrying the inode/sb.
718 redirty_tail(inode, wb);
721 wrote += writeback_sb_inodes(sb, wb, work);
724 /* refer to the same tests at the end of writeback_sb_inodes */
726 if (time_is_before_jiffies(start_time + HZ / 10UL))
728 if (work->nr_pages <= 0)
732 /* Leave any unwritten inodes on b_io */
736 long writeback_inodes_wb(struct bdi_writeback *wb, long nr_pages,
737 enum wb_reason reason)
739 struct wb_writeback_work work = {
740 .nr_pages = nr_pages,
741 .sync_mode = WB_SYNC_NONE,
746 spin_lock(&wb->list_lock);
747 if (list_empty(&wb->b_io))
749 __writeback_inodes_wb(wb, &work);
750 spin_unlock(&wb->list_lock);
752 return nr_pages - work.nr_pages;
755 static bool over_bground_thresh(struct backing_dev_info *bdi)
757 unsigned long background_thresh, dirty_thresh;
759 global_dirty_limits(&background_thresh, &dirty_thresh);
761 if (global_page_state(NR_FILE_DIRTY) +
762 global_page_state(NR_UNSTABLE_NFS) > background_thresh)
765 if (bdi_stat(bdi, BDI_RECLAIMABLE) >
766 bdi_dirty_limit(bdi, background_thresh))
773 * Called under wb->list_lock. If there are multiple wb per bdi,
774 * only the flusher working on the first wb should do it.
776 static void wb_update_bandwidth(struct bdi_writeback *wb,
777 unsigned long start_time)
779 __bdi_update_bandwidth(wb->bdi, 0, 0, 0, 0, 0, start_time);
783 * Explicit flushing or periodic writeback of "old" data.
785 * Define "old": the first time one of an inode's pages is dirtied, we mark the
786 * dirtying-time in the inode's address_space. So this periodic writeback code
787 * just walks the superblock inode list, writing back any inodes which are
788 * older than a specific point in time.
790 * Try to run once per dirty_writeback_interval. But if a writeback event
791 * takes longer than a dirty_writeback_interval interval, then leave a
794 * older_than_this takes precedence over nr_to_write. So we'll only write back
795 * all dirty pages if they are all attached to "old" mappings.
797 static long wb_writeback(struct bdi_writeback *wb,
798 struct wb_writeback_work *work)
800 unsigned long wb_start = jiffies;
801 long nr_pages = work->nr_pages;
802 unsigned long oldest_jif;
806 oldest_jif = jiffies;
807 work->older_than_this = &oldest_jif;
809 spin_lock(&wb->list_lock);
812 * Stop writeback when nr_pages has been consumed
814 if (work->nr_pages <= 0)
818 * Background writeout and kupdate-style writeback may
819 * run forever. Stop them if there is other work to do
820 * so that e.g. sync can proceed. They'll be restarted
821 * after the other works are all done.
823 if ((work->for_background || work->for_kupdate) &&
824 !list_empty(&wb->bdi->work_list))
828 * For background writeout, stop when we are below the
829 * background dirty threshold
831 if (work->for_background && !over_bground_thresh(wb->bdi))
835 * Kupdate and background works are special and we want to
836 * include all inodes that need writing. Livelock avoidance is
837 * handled by these works yielding to any other work so we are
840 if (work->for_kupdate) {
841 oldest_jif = jiffies -
842 msecs_to_jiffies(dirty_expire_interval * 10);
843 } else if (work->for_background)
844 oldest_jif = jiffies;
846 trace_writeback_start(wb->bdi, work);
847 if (list_empty(&wb->b_io))
850 progress = writeback_sb_inodes(work->sb, wb, work);
852 progress = __writeback_inodes_wb(wb, work);
853 trace_writeback_written(wb->bdi, work);
855 wb_update_bandwidth(wb, wb_start);
858 * Did we write something? Try for more
860 * Dirty inodes are moved to b_io for writeback in batches.
861 * The completion of the current batch does not necessarily
862 * mean the overall work is done. So we keep looping as long
863 * as made some progress on cleaning pages or inodes.
868 * No more inodes for IO, bail
870 if (list_empty(&wb->b_more_io))
873 * Nothing written. Wait for some inode to
874 * become available for writeback. Otherwise
875 * we'll just busyloop.
877 if (!list_empty(&wb->b_more_io)) {
878 trace_writeback_wait(wb->bdi, work);
879 inode = wb_inode(wb->b_more_io.prev);
880 spin_lock(&inode->i_lock);
881 spin_unlock(&wb->list_lock);
882 /* This function drops i_lock... */
883 inode_sleep_on_writeback(inode);
884 spin_lock(&wb->list_lock);
887 spin_unlock(&wb->list_lock);
889 return nr_pages - work->nr_pages;
893 * Return the next wb_writeback_work struct that hasn't been processed yet.
895 static struct wb_writeback_work *
896 get_next_work_item(struct backing_dev_info *bdi)
898 struct wb_writeback_work *work = NULL;
900 spin_lock_bh(&bdi->wb_lock);
901 if (!list_empty(&bdi->work_list)) {
902 work = list_entry(bdi->work_list.next,
903 struct wb_writeback_work, list);
904 list_del_init(&work->list);
906 spin_unlock_bh(&bdi->wb_lock);
911 * Add in the number of potentially dirty inodes, because each inode
912 * write can dirty pagecache in the underlying blockdev.
914 static unsigned long get_nr_dirty_pages(void)
916 return global_page_state(NR_FILE_DIRTY) +
917 global_page_state(NR_UNSTABLE_NFS) +
918 get_nr_dirty_inodes();
921 static long wb_check_background_flush(struct bdi_writeback *wb)
923 if (over_bground_thresh(wb->bdi)) {
925 struct wb_writeback_work work = {
926 .nr_pages = LONG_MAX,
927 .sync_mode = WB_SYNC_NONE,
930 .reason = WB_REASON_BACKGROUND,
933 return wb_writeback(wb, &work);
939 static long wb_check_old_data_flush(struct bdi_writeback *wb)
941 unsigned long expired;
945 * When set to zero, disable periodic writeback
947 if (!dirty_writeback_interval)
950 expired = wb->last_old_flush +
951 msecs_to_jiffies(dirty_writeback_interval * 10);
952 if (time_before(jiffies, expired))
955 wb->last_old_flush = jiffies;
956 nr_pages = get_nr_dirty_pages();
959 struct wb_writeback_work work = {
960 .nr_pages = nr_pages,
961 .sync_mode = WB_SYNC_NONE,
964 .reason = WB_REASON_PERIODIC,
967 return wb_writeback(wb, &work);
974 * Retrieve work items and do the writeback they describe
976 long wb_do_writeback(struct bdi_writeback *wb, int force_wait)
978 struct backing_dev_info *bdi = wb->bdi;
979 struct wb_writeback_work *work;
982 set_bit(BDI_writeback_running, &wb->bdi->state);
983 while ((work = get_next_work_item(bdi)) != NULL) {
985 * Override sync mode, in case we must wait for completion
986 * because this thread is exiting now.
989 work->sync_mode = WB_SYNC_ALL;
991 trace_writeback_exec(bdi, work);
993 wrote += wb_writeback(wb, work);
996 * Notify the caller of completion if this is a synchronous
997 * work item, otherwise just free it.
1000 complete(work->done);
1006 * Check for periodic writeback, kupdated() style
1008 wrote += wb_check_old_data_flush(wb);
1009 wrote += wb_check_background_flush(wb);
1010 clear_bit(BDI_writeback_running, &wb->bdi->state);
1016 * Handle writeback of dirty data for the device backed by this bdi. Also
1017 * wakes up periodically and does kupdated style flushing.
1019 int bdi_writeback_thread(void *data)
1021 struct bdi_writeback *wb = data;
1022 struct backing_dev_info *bdi = wb->bdi;
1025 current->flags |= PF_SWAPWRITE;
1027 wb->last_active = jiffies;
1030 * Our parent may run at a different priority, just set us to normal
1032 set_user_nice(current, 0);
1034 trace_writeback_thread_start(bdi);
1036 while (!kthread_freezable_should_stop(NULL)) {
1038 * Remove own delayed wake-up timer, since we are already awake
1039 * and we'll take care of the preriodic write-back.
1041 del_timer(&wb->wakeup_timer);
1043 pages_written = wb_do_writeback(wb, 0);
1045 trace_writeback_pages_written(pages_written);
1048 wb->last_active = jiffies;
1050 set_current_state(TASK_INTERRUPTIBLE);
1051 if (!list_empty(&bdi->work_list) || kthread_should_stop()) {
1052 __set_current_state(TASK_RUNNING);
1056 if (wb_has_dirty_io(wb) && dirty_writeback_interval)
1057 schedule_timeout(msecs_to_jiffies(dirty_writeback_interval * 10));
1060 * We have nothing to do, so can go sleep without any
1061 * timeout and save power. When a work is queued or
1062 * something is made dirty - we will be woken up.
1068 /* Flush any work that raced with us exiting */
1069 if (!list_empty(&bdi->work_list))
1070 wb_do_writeback(wb, 1);
1072 trace_writeback_thread_stop(bdi);
1078 * Start writeback of `nr_pages' pages. If `nr_pages' is zero, write back
1081 void wakeup_flusher_threads(long nr_pages, enum wb_reason reason)
1083 struct backing_dev_info *bdi;
1086 nr_pages = global_page_state(NR_FILE_DIRTY) +
1087 global_page_state(NR_UNSTABLE_NFS);
1091 list_for_each_entry_rcu(bdi, &bdi_list, bdi_list) {
1092 if (!bdi_has_dirty_io(bdi))
1094 __bdi_start_writeback(bdi, nr_pages, false, reason);
1099 static noinline void block_dump___mark_inode_dirty(struct inode *inode)
1101 if (inode->i_ino || strcmp(inode->i_sb->s_id, "bdev")) {
1102 struct dentry *dentry;
1103 const char *name = "?";
1105 dentry = d_find_alias(inode);
1107 spin_lock(&dentry->d_lock);
1108 name = (const char *) dentry->d_name.name;
1111 "%s(%d): dirtied inode %lu (%s) on %s\n",
1112 current->comm, task_pid_nr(current), inode->i_ino,
1113 name, inode->i_sb->s_id);
1115 spin_unlock(&dentry->d_lock);
1122 * __mark_inode_dirty - internal function
1123 * @inode: inode to mark
1124 * @flags: what kind of dirty (i.e. I_DIRTY_SYNC)
1125 * Mark an inode as dirty. Callers should use mark_inode_dirty or
1126 * mark_inode_dirty_sync.
1128 * Put the inode on the super block's dirty list.
1130 * CAREFUL! We mark it dirty unconditionally, but move it onto the
1131 * dirty list only if it is hashed or if it refers to a blockdev.
1132 * If it was not hashed, it will never be added to the dirty list
1133 * even if it is later hashed, as it will have been marked dirty already.
1135 * In short, make sure you hash any inodes _before_ you start marking
1138 * Note that for blockdevs, inode->dirtied_when represents the dirtying time of
1139 * the block-special inode (/dev/hda1) itself. And the ->dirtied_when field of
1140 * the kernel-internal blockdev inode represents the dirtying time of the
1141 * blockdev's pages. This is why for I_DIRTY_PAGES we always use
1142 * page->mapping->host, so the page-dirtying time is recorded in the internal
1145 void __mark_inode_dirty(struct inode *inode, int flags)
1147 struct super_block *sb = inode->i_sb;
1148 struct backing_dev_info *bdi = NULL;
1151 * Don't do this for I_DIRTY_PAGES - that doesn't actually
1152 * dirty the inode itself
1154 if (flags & (I_DIRTY_SYNC | I_DIRTY_DATASYNC)) {
1155 if (sb->s_op->dirty_inode)
1156 sb->s_op->dirty_inode(inode, flags);
1160 * make sure that changes are seen by all cpus before we test i_state
1165 /* avoid the locking if we can */
1166 if ((inode->i_state & flags) == flags)
1169 if (unlikely(block_dump))
1170 block_dump___mark_inode_dirty(inode);
1172 spin_lock(&inode->i_lock);
1173 if ((inode->i_state & flags) != flags) {
1174 const int was_dirty = inode->i_state & I_DIRTY;
1176 inode->i_state |= flags;
1179 * If the inode is being synced, just update its dirty state.
1180 * The unlocker will place the inode on the appropriate
1181 * superblock list, based upon its state.
1183 if (inode->i_state & I_SYNC)
1184 goto out_unlock_inode;
1187 * Only add valid (hashed) inodes to the superblock's
1188 * dirty list. Add blockdev inodes as well.
1190 if (!S_ISBLK(inode->i_mode)) {
1191 if (inode_unhashed(inode))
1192 goto out_unlock_inode;
1194 if (inode->i_state & I_FREEING)
1195 goto out_unlock_inode;
1198 * If the inode was already on b_dirty/b_io/b_more_io, don't
1199 * reposition it (that would break b_dirty time-ordering).
1202 bool wakeup_bdi = false;
1203 bdi = inode_to_bdi(inode);
1205 if (bdi_cap_writeback_dirty(bdi)) {
1206 WARN(!test_bit(BDI_registered, &bdi->state),
1207 "bdi-%s not registered\n", bdi->name);
1210 * If this is the first dirty inode for this
1211 * bdi, we have to wake-up the corresponding
1212 * bdi thread to make sure background
1213 * write-back happens later.
1215 if (!wb_has_dirty_io(&bdi->wb))
1219 spin_unlock(&inode->i_lock);
1220 spin_lock(&bdi->wb.list_lock);
1221 inode->dirtied_when = jiffies;
1222 list_move(&inode->i_wb_list, &bdi->wb.b_dirty);
1223 spin_unlock(&bdi->wb.list_lock);
1226 bdi_wakeup_thread_delayed(bdi);
1231 spin_unlock(&inode->i_lock);
1234 EXPORT_SYMBOL(__mark_inode_dirty);
1236 static void wait_sb_inodes(struct super_block *sb)
1238 struct inode *inode, *old_inode = NULL;
1241 * We need to be protected against the filesystem going from
1242 * r/o to r/w or vice versa.
1244 WARN_ON(!rwsem_is_locked(&sb->s_umount));
1246 spin_lock(&inode_sb_list_lock);
1249 * Data integrity sync. Must wait for all pages under writeback,
1250 * because there may have been pages dirtied before our sync
1251 * call, but which had writeout started before we write it out.
1252 * In which case, the inode may not be on the dirty list, but
1253 * we still have to wait for that writeout.
1255 list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
1256 struct address_space *mapping = inode->i_mapping;
1258 spin_lock(&inode->i_lock);
1259 if ((inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW)) ||
1260 (mapping->nrpages == 0)) {
1261 spin_unlock(&inode->i_lock);
1265 spin_unlock(&inode->i_lock);
1266 spin_unlock(&inode_sb_list_lock);
1269 * We hold a reference to 'inode' so it couldn't have been
1270 * removed from s_inodes list while we dropped the
1271 * inode_sb_list_lock. We cannot iput the inode now as we can
1272 * be holding the last reference and we cannot iput it under
1273 * inode_sb_list_lock. So we keep the reference and iput it
1279 filemap_fdatawait(mapping);
1283 spin_lock(&inode_sb_list_lock);
1285 spin_unlock(&inode_sb_list_lock);
1290 * writeback_inodes_sb_nr - writeback dirty inodes from given super_block
1291 * @sb: the superblock
1292 * @nr: the number of pages to write
1293 * @reason: reason why some writeback work initiated
1295 * Start writeback on some inodes on this super_block. No guarantees are made
1296 * on how many (if any) will be written, and this function does not wait
1297 * for IO completion of submitted IO.
1299 void writeback_inodes_sb_nr(struct super_block *sb,
1301 enum wb_reason reason)
1303 DECLARE_COMPLETION_ONSTACK(done);
1304 struct wb_writeback_work work = {
1306 .sync_mode = WB_SYNC_NONE,
1307 .tagged_writepages = 1,
1313 if (sb->s_bdi == &noop_backing_dev_info)
1315 WARN_ON(!rwsem_is_locked(&sb->s_umount));
1316 bdi_queue_work(sb->s_bdi, &work);
1317 wait_for_completion(&done);
1319 EXPORT_SYMBOL(writeback_inodes_sb_nr);
1322 * writeback_inodes_sb - writeback dirty inodes from given super_block
1323 * @sb: the superblock
1324 * @reason: reason why some writeback work was initiated
1326 * Start writeback on some inodes on this super_block. No guarantees are made
1327 * on how many (if any) will be written, and this function does not wait
1328 * for IO completion of submitted IO.
1330 void writeback_inodes_sb(struct super_block *sb, enum wb_reason reason)
1332 return writeback_inodes_sb_nr(sb, get_nr_dirty_pages(), reason);
1334 EXPORT_SYMBOL(writeback_inodes_sb);
1337 * writeback_inodes_sb_if_idle - start writeback if none underway
1338 * @sb: the superblock
1339 * @reason: reason why some writeback work was initiated
1341 * Invoke writeback_inodes_sb if no writeback is currently underway.
1342 * Returns 1 if writeback was started, 0 if not.
1344 int writeback_inodes_sb_if_idle(struct super_block *sb, enum wb_reason reason)
1346 if (!writeback_in_progress(sb->s_bdi)) {
1347 down_read(&sb->s_umount);
1348 writeback_inodes_sb(sb, reason);
1349 up_read(&sb->s_umount);
1354 EXPORT_SYMBOL(writeback_inodes_sb_if_idle);
1357 * writeback_inodes_sb_nr_if_idle - start writeback if none underway
1358 * @sb: the superblock
1359 * @nr: the number of pages to write
1360 * @reason: reason why some writeback work was initiated
1362 * Invoke writeback_inodes_sb if no writeback is currently underway.
1363 * Returns 1 if writeback was started, 0 if not.
1365 int writeback_inodes_sb_nr_if_idle(struct super_block *sb,
1367 enum wb_reason reason)
1369 if (!writeback_in_progress(sb->s_bdi)) {
1370 down_read(&sb->s_umount);
1371 writeback_inodes_sb_nr(sb, nr, reason);
1372 up_read(&sb->s_umount);
1377 EXPORT_SYMBOL(writeback_inodes_sb_nr_if_idle);
1380 * sync_inodes_sb - sync sb inode pages
1381 * @sb: the superblock
1383 * This function writes and waits on any dirty inode belonging to this
1386 void sync_inodes_sb(struct super_block *sb)
1388 DECLARE_COMPLETION_ONSTACK(done);
1389 struct wb_writeback_work work = {
1391 .sync_mode = WB_SYNC_ALL,
1392 .nr_pages = LONG_MAX,
1395 .reason = WB_REASON_SYNC,
1398 /* Nothing to do? */
1399 if (sb->s_bdi == &noop_backing_dev_info)
1401 WARN_ON(!rwsem_is_locked(&sb->s_umount));
1403 bdi_queue_work(sb->s_bdi, &work);
1404 wait_for_completion(&done);
1408 EXPORT_SYMBOL(sync_inodes_sb);
1411 * write_inode_now - write an inode to disk
1412 * @inode: inode to write to disk
1413 * @sync: whether the write should be synchronous or not
1415 * This function commits an inode to disk immediately if it is dirty. This is
1416 * primarily needed by knfsd.
1418 * The caller must either have a ref on the inode or must have set I_WILL_FREE.
1420 int write_inode_now(struct inode *inode, int sync)
1422 struct bdi_writeback *wb = &inode_to_bdi(inode)->wb;
1423 struct writeback_control wbc = {
1424 .nr_to_write = LONG_MAX,
1425 .sync_mode = sync ? WB_SYNC_ALL : WB_SYNC_NONE,
1427 .range_end = LLONG_MAX,
1430 if (!mapping_cap_writeback_dirty(inode->i_mapping))
1431 wbc.nr_to_write = 0;
1434 return writeback_single_inode(inode, wb, &wbc);
1436 EXPORT_SYMBOL(write_inode_now);
1439 * sync_inode - write an inode and its pages to disk.
1440 * @inode: the inode to sync
1441 * @wbc: controls the writeback mode
1443 * sync_inode() will write an inode and its pages to disk. It will also
1444 * correctly update the inode on its superblock's dirty inode lists and will
1445 * update inode->i_state.
1447 * The caller must have a ref on the inode.
1449 int sync_inode(struct inode *inode, struct writeback_control *wbc)
1451 return writeback_single_inode(inode, &inode_to_bdi(inode)->wb, wbc);
1453 EXPORT_SYMBOL(sync_inode);
1456 * sync_inode_metadata - write an inode to disk
1457 * @inode: the inode to sync
1458 * @wait: wait for I/O to complete.
1460 * Write an inode to disk and adjust its dirty state after completion.
1462 * Note: only writes the actual inode, no associated data or other metadata.
1464 int sync_inode_metadata(struct inode *inode, int wait)
1466 struct writeback_control wbc = {
1467 .sync_mode = wait ? WB_SYNC_ALL : WB_SYNC_NONE,
1468 .nr_to_write = 0, /* metadata-only */
1471 return sync_inode(inode, &wbc);
1473 EXPORT_SYMBOL(sync_inode_metadata);