1 // SPDX-License-Identifier: GPL-2.0
3 #include <linux/blkdev.h>
4 #include <linux/iversion.h>
5 #include "compression.h"
7 #include "delalloc-space.h"
9 #include "transaction.h"
11 #define BTRFS_MAX_DEDUPE_LEN SZ_16M
13 static int clone_finish_inode_update(struct btrfs_trans_handle *trans,
20 struct btrfs_root *root = BTRFS_I(inode)->root;
23 inode_inc_iversion(inode);
25 inode->i_mtime = inode->i_ctime = current_time(inode);
27 * We round up to the block size at eof when determining which
28 * extents to clone above, but shouldn't round up the file size.
30 if (endoff > destoff + olen)
31 endoff = destoff + olen;
32 if (endoff > inode->i_size) {
33 i_size_write(inode, endoff);
34 btrfs_inode_safe_disk_i_size_write(BTRFS_I(inode), 0);
37 ret = btrfs_update_inode(trans, root, BTRFS_I(inode));
39 btrfs_abort_transaction(trans, ret);
40 btrfs_end_transaction(trans);
43 ret = btrfs_end_transaction(trans);
48 static int copy_inline_to_page(struct btrfs_inode *inode,
49 const u64 file_offset,
55 const u64 block_size = btrfs_inode_sectorsize(inode);
56 const u64 range_end = file_offset + block_size - 1;
57 const size_t inline_size = size - btrfs_file_extent_calc_inline_size(0);
58 char *data_start = inline_data + btrfs_file_extent_calc_inline_size(0);
59 struct extent_changeset *data_reserved = NULL;
60 struct page *page = NULL;
61 struct address_space *mapping = inode->vfs_inode.i_mapping;
64 ASSERT(IS_ALIGNED(file_offset, block_size));
67 * We have flushed and locked the ranges of the source and destination
68 * inodes, we also have locked the inodes, so we are safe to do a
69 * reservation here. Also we must not do the reservation while holding
70 * a transaction open, otherwise we would deadlock.
72 ret = btrfs_delalloc_reserve_space(inode, &data_reserved, file_offset,
77 page = find_or_create_page(mapping, file_offset >> PAGE_SHIFT,
78 btrfs_alloc_write_mask(mapping));
84 ret = set_page_extent_mapped(page);
88 clear_extent_bit(&inode->io_tree, file_offset, range_end,
89 EXTENT_DELALLOC | EXTENT_DO_ACCOUNTING | EXTENT_DEFRAG,
91 ret = btrfs_set_extent_delalloc(inode, file_offset, range_end, 0, NULL);
96 * After dirtying the page our caller will need to start a transaction,
97 * and if we are low on metadata free space, that can cause flushing of
98 * delalloc for all inodes in order to get metadata space released.
99 * However we are holding the range locked for the whole duration of
100 * the clone/dedupe operation, so we may deadlock if that happens and no
101 * other task releases enough space. So mark this inode as not being
102 * possible to flush to avoid such deadlock. We will clear that flag
103 * when we finish cloning all extents, since a transaction is started
104 * after finding each extent to clone.
106 set_bit(BTRFS_INODE_NO_DELALLOC_FLUSH, &inode->runtime_flags);
108 if (comp_type == BTRFS_COMPRESS_NONE) {
109 memcpy_to_page(page, 0, data_start, datal);
110 flush_dcache_page(page);
112 ret = btrfs_decompress(comp_type, data_start, page, 0,
116 flush_dcache_page(page);
120 * If our inline data is smaller then the block/page size, then the
121 * remaining of the block/page is equivalent to zeroes. We had something
122 * like the following done:
124 * $ xfs_io -f -c "pwrite -S 0xab 0 500" file
125 * $ sync # (or fsync)
126 * $ xfs_io -c "falloc 0 4K" file
127 * $ xfs_io -c "pwrite -S 0xcd 4K 4K"
129 * So what's in the range [500, 4095] corresponds to zeroes.
131 if (datal < block_size) {
135 memset(map + datal, 0, block_size - datal);
136 flush_dcache_page(page);
140 SetPageUptodate(page);
141 ClearPageChecked(page);
142 set_page_dirty(page);
149 btrfs_delalloc_release_space(inode, data_reserved, file_offset,
151 btrfs_delalloc_release_extents(inode, block_size);
153 extent_changeset_free(data_reserved);
159 * Deal with cloning of inline extents. We try to copy the inline extent from
160 * the source inode to destination inode when possible. When not possible we
161 * copy the inline extent's data into the respective page of the inode.
163 static int clone_copy_inline_extent(struct inode *dst,
164 struct btrfs_path *path,
165 struct btrfs_key *new_key,
166 const u64 drop_start,
171 struct btrfs_trans_handle **trans_out)
173 struct btrfs_fs_info *fs_info = btrfs_sb(dst->i_sb);
174 struct btrfs_root *root = BTRFS_I(dst)->root;
175 const u64 aligned_end = ALIGN(new_key->offset + datal,
176 fs_info->sectorsize);
177 struct btrfs_trans_handle *trans = NULL;
178 struct btrfs_drop_extents_args drop_args = { 0 };
180 struct btrfs_key key;
182 if (new_key->offset > 0) {
183 ret = copy_inline_to_page(BTRFS_I(dst), new_key->offset,
184 inline_data, size, datal, comp_type);
188 key.objectid = btrfs_ino(BTRFS_I(dst));
189 key.type = BTRFS_EXTENT_DATA_KEY;
191 ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
194 } else if (ret > 0) {
195 if (path->slots[0] >= btrfs_header_nritems(path->nodes[0])) {
196 ret = btrfs_next_leaf(root, path);
200 goto copy_inline_extent;
202 btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0]);
203 if (key.objectid == btrfs_ino(BTRFS_I(dst)) &&
204 key.type == BTRFS_EXTENT_DATA_KEY) {
206 * There's an implicit hole at file offset 0, copy the
207 * inline extent's data to the page.
209 ASSERT(key.offset > 0);
210 ret = copy_inline_to_page(BTRFS_I(dst), new_key->offset,
211 inline_data, size, datal,
215 } else if (i_size_read(dst) <= datal) {
216 struct btrfs_file_extent_item *ei;
218 ei = btrfs_item_ptr(path->nodes[0], path->slots[0],
219 struct btrfs_file_extent_item);
221 * If it's an inline extent replace it with the source inline
222 * extent, otherwise copy the source inline extent data into
223 * the respective page at the destination inode.
225 if (btrfs_file_extent_type(path->nodes[0], ei) ==
226 BTRFS_FILE_EXTENT_INLINE)
227 goto copy_inline_extent;
229 ret = copy_inline_to_page(BTRFS_I(dst), new_key->offset,
230 inline_data, size, datal, comp_type);
237 * We have no extent items, or we have an extent at offset 0 which may
238 * or may not be inlined. All these cases are dealt the same way.
240 if (i_size_read(dst) > datal) {
242 * At the destination offset 0 we have either a hole, a regular
243 * extent or an inline extent larger then the one we want to
244 * clone. Deal with all these cases by copying the inline extent
245 * data into the respective page at the destination inode.
247 ret = copy_inline_to_page(BTRFS_I(dst), new_key->offset,
248 inline_data, size, datal, comp_type);
252 btrfs_release_path(path);
254 * If we end up here it means were copy the inline extent into a leaf
255 * of the destination inode. We know we will drop or adjust at most one
256 * extent item in the destination root.
258 * 1 unit - adjusting old extent (we may have to split it)
259 * 1 unit - add new extent
260 * 1 unit - inode update
262 trans = btrfs_start_transaction(root, 3);
264 ret = PTR_ERR(trans);
268 drop_args.path = path;
269 drop_args.start = drop_start;
270 drop_args.end = aligned_end;
271 drop_args.drop_cache = true;
272 ret = btrfs_drop_extents(trans, root, BTRFS_I(dst), &drop_args);
275 ret = btrfs_insert_empty_item(trans, root, path, new_key, size);
279 write_extent_buffer(path->nodes[0], inline_data,
280 btrfs_item_ptr_offset(path->nodes[0],
283 btrfs_update_inode_bytes(BTRFS_I(dst), datal, drop_args.bytes_found);
284 set_bit(BTRFS_INODE_NEEDS_FULL_SYNC, &BTRFS_I(dst)->runtime_flags);
285 ret = btrfs_inode_set_file_extent_range(BTRFS_I(dst), 0, aligned_end);
287 if (!ret && !trans) {
289 * Release path before starting a new transaction so we don't
290 * hold locks that would confuse lockdep.
292 btrfs_release_path(path);
294 * No transaction here means we copied the inline extent into a
295 * page of the destination inode.
297 * 1 unit to update inode item
299 trans = btrfs_start_transaction(root, 1);
301 ret = PTR_ERR(trans);
306 btrfs_abort_transaction(trans, ret);
307 btrfs_end_transaction(trans);
316 * btrfs_clone() - clone a range from inode file to another
318 * @src: Inode to clone from
319 * @inode: Inode to clone to
320 * @off: Offset within source to start clone from
321 * @olen: Original length, passed by user, of range to clone
322 * @olen_aligned: Block-aligned value of olen
323 * @destoff: Offset within @inode to start clone
324 * @no_time_update: Whether to update mtime/ctime on the target inode
326 static int btrfs_clone(struct inode *src, struct inode *inode,
327 const u64 off, const u64 olen, const u64 olen_aligned,
328 const u64 destoff, int no_time_update)
330 struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb);
331 struct btrfs_path *path = NULL;
332 struct extent_buffer *leaf;
333 struct btrfs_trans_handle *trans;
335 struct btrfs_key key;
339 const u64 len = olen_aligned;
340 u64 last_dest_end = destoff;
343 buf = kvmalloc(fs_info->nodesize, GFP_KERNEL);
347 path = btrfs_alloc_path();
353 path->reada = READA_FORWARD;
355 key.objectid = btrfs_ino(BTRFS_I(src));
356 key.type = BTRFS_EXTENT_DATA_KEY;
360 u64 next_key_min_offset = key.offset + 1;
361 struct btrfs_file_extent_item *extent;
365 struct btrfs_key new_key;
366 u64 disko = 0, diskl = 0;
367 u64 datao = 0, datal = 0;
371 /* Note the key will change type as we walk through the tree */
372 ret = btrfs_search_slot(NULL, BTRFS_I(src)->root, &key, path,
377 * First search, if no extent item that starts at offset off was
378 * found but the previous item is an extent item, it's possible
379 * it might overlap our target range, therefore process it.
381 if (key.offset == off && ret > 0 && path->slots[0] > 0) {
382 btrfs_item_key_to_cpu(path->nodes[0], &key,
384 if (key.type == BTRFS_EXTENT_DATA_KEY)
388 nritems = btrfs_header_nritems(path->nodes[0]);
390 if (path->slots[0] >= nritems) {
391 ret = btrfs_next_leaf(BTRFS_I(src)->root, path);
396 nritems = btrfs_header_nritems(path->nodes[0]);
398 leaf = path->nodes[0];
399 slot = path->slots[0];
401 btrfs_item_key_to_cpu(leaf, &key, slot);
402 if (key.type > BTRFS_EXTENT_DATA_KEY ||
403 key.objectid != btrfs_ino(BTRFS_I(src)))
406 ASSERT(key.type == BTRFS_EXTENT_DATA_KEY);
408 extent = btrfs_item_ptr(leaf, slot,
409 struct btrfs_file_extent_item);
410 extent_gen = btrfs_file_extent_generation(leaf, extent);
411 comp = btrfs_file_extent_compression(leaf, extent);
412 type = btrfs_file_extent_type(leaf, extent);
413 if (type == BTRFS_FILE_EXTENT_REG ||
414 type == BTRFS_FILE_EXTENT_PREALLOC) {
415 disko = btrfs_file_extent_disk_bytenr(leaf, extent);
416 diskl = btrfs_file_extent_disk_num_bytes(leaf, extent);
417 datao = btrfs_file_extent_offset(leaf, extent);
418 datal = btrfs_file_extent_num_bytes(leaf, extent);
419 } else if (type == BTRFS_FILE_EXTENT_INLINE) {
420 /* Take upper bound, may be compressed */
421 datal = btrfs_file_extent_ram_bytes(leaf, extent);
425 * The first search might have left us at an extent item that
426 * ends before our target range's start, can happen if we have
427 * holes and NO_HOLES feature enabled.
429 if (key.offset + datal <= off) {
432 } else if (key.offset >= off + len) {
435 next_key_min_offset = key.offset + datal;
436 size = btrfs_item_size_nr(leaf, slot);
437 read_extent_buffer(leaf, buf, btrfs_item_ptr_offset(leaf, slot),
440 btrfs_release_path(path);
442 memcpy(&new_key, &key, sizeof(new_key));
443 new_key.objectid = btrfs_ino(BTRFS_I(inode));
444 if (off <= key.offset)
445 new_key.offset = key.offset + destoff - off;
447 new_key.offset = destoff;
450 * Deal with a hole that doesn't have an extent item that
451 * represents it (NO_HOLES feature enabled).
452 * This hole is either in the middle of the cloning range or at
453 * the beginning (fully overlaps it or partially overlaps it).
455 if (new_key.offset != last_dest_end)
456 drop_start = last_dest_end;
458 drop_start = new_key.offset;
460 if (type == BTRFS_FILE_EXTENT_REG ||
461 type == BTRFS_FILE_EXTENT_PREALLOC) {
462 struct btrfs_replace_extent_info clone_info;
465 * a | --- range to clone ---| b
466 * | ------------- extent ------------- |
469 /* Subtract range b */
470 if (key.offset + datal > off + len)
471 datal = off + len - key.offset;
473 /* Subtract range a */
474 if (off > key.offset) {
475 datao += off - key.offset;
476 datal -= off - key.offset;
479 clone_info.disk_offset = disko;
480 clone_info.disk_len = diskl;
481 clone_info.data_offset = datao;
482 clone_info.data_len = datal;
483 clone_info.file_offset = new_key.offset;
484 clone_info.extent_buf = buf;
485 clone_info.is_new_extent = false;
486 ret = btrfs_replace_file_extents(BTRFS_I(inode), path,
487 drop_start, new_key.offset + datal - 1,
488 &clone_info, &trans);
491 } else if (type == BTRFS_FILE_EXTENT_INLINE) {
493 * Inline extents always have to start at file offset 0
494 * and can never be bigger then the sector size. We can
495 * never clone only parts of an inline extent, since all
496 * reflink operations must start at a sector size aligned
497 * offset, and the length must be aligned too or end at
498 * the i_size (which implies the whole inlined data).
500 ASSERT(key.offset == 0);
501 ASSERT(datal <= fs_info->sectorsize);
502 if (key.offset != 0 || datal > fs_info->sectorsize)
505 ret = clone_copy_inline_extent(inode, path, &new_key,
506 drop_start, datal, size,
512 btrfs_release_path(path);
515 * If this is a new extent update the last_reflink_trans of both
516 * inodes. This is used by fsync to make sure it does not log
517 * multiple checksum items with overlapping ranges. For older
518 * extents we don't need to do it since inode logging skips the
519 * checksums for older extents. Also ignore holes and inline
520 * extents because they don't have checksums in the csum tree.
522 if (extent_gen == trans->transid && disko > 0) {
523 BTRFS_I(src)->last_reflink_trans = trans->transid;
524 BTRFS_I(inode)->last_reflink_trans = trans->transid;
527 last_dest_end = ALIGN(new_key.offset + datal,
528 fs_info->sectorsize);
529 ret = clone_finish_inode_update(trans, inode, last_dest_end,
530 destoff, olen, no_time_update);
533 if (new_key.offset + datal >= destoff + len)
536 btrfs_release_path(path);
537 key.offset = next_key_min_offset;
539 if (fatal_signal_pending(current)) {
548 if (last_dest_end < destoff + len) {
550 * We have an implicit hole that fully or partially overlaps our
551 * cloning range at its end. This means that we either have the
552 * NO_HOLES feature enabled or the implicit hole happened due to
553 * mixing buffered and direct IO writes against this file.
555 btrfs_release_path(path);
558 * When using NO_HOLES and we are cloning a range that covers
559 * only a hole (no extents) into a range beyond the current
560 * i_size, punching a hole in the target range will not create
561 * an extent map defining a hole, because the range starts at or
562 * beyond current i_size. If the file previously had an i_size
563 * greater than the new i_size set by this clone operation, we
564 * need to make sure the next fsync is a full fsync, so that it
565 * detects and logs a hole covering a range from the current
566 * i_size to the new i_size. If the clone range covers extents,
567 * besides a hole, then we know the full sync flag was already
568 * set by previous calls to btrfs_replace_file_extents() that
569 * replaced file extent items.
571 if (last_dest_end >= i_size_read(inode))
572 set_bit(BTRFS_INODE_NEEDS_FULL_SYNC,
573 &BTRFS_I(inode)->runtime_flags);
575 ret = btrfs_replace_file_extents(BTRFS_I(inode), path,
576 last_dest_end, destoff + len - 1, NULL, &trans);
580 ret = clone_finish_inode_update(trans, inode, destoff + len,
581 destoff, olen, no_time_update);
585 btrfs_free_path(path);
587 clear_bit(BTRFS_INODE_NO_DELALLOC_FLUSH, &BTRFS_I(inode)->runtime_flags);
592 static void btrfs_double_extent_unlock(struct inode *inode1, u64 loff1,
593 struct inode *inode2, u64 loff2, u64 len)
595 unlock_extent(&BTRFS_I(inode1)->io_tree, loff1, loff1 + len - 1);
596 unlock_extent(&BTRFS_I(inode2)->io_tree, loff2, loff2 + len - 1);
599 static void btrfs_double_extent_lock(struct inode *inode1, u64 loff1,
600 struct inode *inode2, u64 loff2, u64 len)
602 if (inode1 < inode2) {
603 swap(inode1, inode2);
605 } else if (inode1 == inode2 && loff2 < loff1) {
608 lock_extent(&BTRFS_I(inode1)->io_tree, loff1, loff1 + len - 1);
609 lock_extent(&BTRFS_I(inode2)->io_tree, loff2, loff2 + len - 1);
612 static void btrfs_double_mmap_lock(struct inode *inode1, struct inode *inode2)
615 swap(inode1, inode2);
616 down_write(&BTRFS_I(inode1)->i_mmap_lock);
617 down_write_nested(&BTRFS_I(inode2)->i_mmap_lock, SINGLE_DEPTH_NESTING);
620 static void btrfs_double_mmap_unlock(struct inode *inode1, struct inode *inode2)
622 up_write(&BTRFS_I(inode1)->i_mmap_lock);
623 up_write(&BTRFS_I(inode2)->i_mmap_lock);
626 static int btrfs_extent_same_range(struct inode *src, u64 loff, u64 len,
627 struct inode *dst, u64 dst_loff)
629 const u64 bs = BTRFS_I(src)->root->fs_info->sb->s_blocksize;
633 * Lock destination range to serialize with concurrent readpages() and
634 * source range to serialize with relocation.
636 btrfs_double_extent_lock(src, loff, dst, dst_loff, len);
637 ret = btrfs_clone(src, dst, loff, len, ALIGN(len, bs), dst_loff, 1);
638 btrfs_double_extent_unlock(src, loff, dst, dst_loff, len);
643 static int btrfs_extent_same(struct inode *src, u64 loff, u64 olen,
644 struct inode *dst, u64 dst_loff)
647 u64 i, tail_len, chunk_count;
648 struct btrfs_root *root_dst = BTRFS_I(dst)->root;
650 spin_lock(&root_dst->root_item_lock);
651 if (root_dst->send_in_progress) {
652 btrfs_warn_rl(root_dst->fs_info,
653 "cannot deduplicate to root %llu while send operations are using it (%d in progress)",
654 root_dst->root_key.objectid,
655 root_dst->send_in_progress);
656 spin_unlock(&root_dst->root_item_lock);
659 root_dst->dedupe_in_progress++;
660 spin_unlock(&root_dst->root_item_lock);
662 tail_len = olen % BTRFS_MAX_DEDUPE_LEN;
663 chunk_count = div_u64(olen, BTRFS_MAX_DEDUPE_LEN);
665 for (i = 0; i < chunk_count; i++) {
666 ret = btrfs_extent_same_range(src, loff, BTRFS_MAX_DEDUPE_LEN,
671 loff += BTRFS_MAX_DEDUPE_LEN;
672 dst_loff += BTRFS_MAX_DEDUPE_LEN;
676 ret = btrfs_extent_same_range(src, loff, tail_len, dst, dst_loff);
678 spin_lock(&root_dst->root_item_lock);
679 root_dst->dedupe_in_progress--;
680 spin_unlock(&root_dst->root_item_lock);
685 static noinline int btrfs_clone_files(struct file *file, struct file *file_src,
686 u64 off, u64 olen, u64 destoff)
688 struct inode *inode = file_inode(file);
689 struct inode *src = file_inode(file_src);
690 struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb);
694 u64 bs = fs_info->sb->s_blocksize;
697 * VFS's generic_remap_file_range_prep() protects us from cloning the
698 * eof block into the middle of a file, which would result in corruption
699 * if the file size is not blocksize aligned. So we don't need to check
700 * for that case here.
702 if (off + len == src->i_size)
703 len = ALIGN(src->i_size, bs) - off;
705 if (destoff > inode->i_size) {
706 const u64 wb_start = ALIGN_DOWN(inode->i_size, bs);
708 ret = btrfs_cont_expand(BTRFS_I(inode), inode->i_size, destoff);
712 * We may have truncated the last block if the inode's size is
713 * not sector size aligned, so we need to wait for writeback to
714 * complete before proceeding further, otherwise we can race
715 * with cloning and attempt to increment a reference to an
716 * extent that no longer exists (writeback completed right after
717 * we found the previous extent covering eof and before we
718 * attempted to increment its reference count).
720 ret = btrfs_wait_ordered_range(inode, wb_start,
727 * Lock destination range to serialize with concurrent readpages() and
728 * source range to serialize with relocation.
730 btrfs_double_extent_lock(src, off, inode, destoff, len);
731 ret = btrfs_clone(src, inode, off, olen, len, destoff, 0);
732 btrfs_double_extent_unlock(src, off, inode, destoff, len);
735 * We may have copied an inline extent into a page of the destination
736 * range, so wait for writeback to complete before truncating pages
737 * from the page cache. This is a rare case.
739 wb_ret = btrfs_wait_ordered_range(inode, destoff, len);
740 ret = ret ? ret : wb_ret;
742 * Truncate page cache pages so that future reads will see the cloned
743 * data immediately and not the previous data.
745 truncate_inode_pages_range(&inode->i_data,
746 round_down(destoff, PAGE_SIZE),
747 round_up(destoff + len, PAGE_SIZE) - 1);
752 static int btrfs_remap_file_range_prep(struct file *file_in, loff_t pos_in,
753 struct file *file_out, loff_t pos_out,
754 loff_t *len, unsigned int remap_flags)
756 struct inode *inode_in = file_inode(file_in);
757 struct inode *inode_out = file_inode(file_out);
758 u64 bs = BTRFS_I(inode_out)->root->fs_info->sb->s_blocksize;
759 bool same_inode = inode_out == inode_in;
763 if (!(remap_flags & REMAP_FILE_DEDUP)) {
764 struct btrfs_root *root_out = BTRFS_I(inode_out)->root;
766 if (btrfs_root_readonly(root_out))
769 if (file_in->f_path.mnt != file_out->f_path.mnt ||
770 inode_in->i_sb != inode_out->i_sb)
774 /* Don't make the dst file partly checksummed */
775 if ((BTRFS_I(inode_in)->flags & BTRFS_INODE_NODATASUM) !=
776 (BTRFS_I(inode_out)->flags & BTRFS_INODE_NODATASUM)) {
781 * Now that the inodes are locked, we need to start writeback ourselves
782 * and can not rely on the writeback from the VFS's generic helper
783 * generic_remap_file_range_prep() because:
785 * 1) For compression we must call filemap_fdatawrite_range() range
786 * twice (btrfs_fdatawrite_range() does it for us), and the generic
787 * helper only calls it once;
789 * 2) filemap_fdatawrite_range(), called by the generic helper only
790 * waits for the writeback to complete, i.e. for IO to be done, and
791 * not for the ordered extents to complete. We need to wait for them
792 * to complete so that new file extent items are in the fs tree.
794 if (*len == 0 && !(remap_flags & REMAP_FILE_DEDUP))
795 wb_len = ALIGN(inode_in->i_size, bs) - ALIGN_DOWN(pos_in, bs);
797 wb_len = ALIGN(*len, bs);
800 * Since we don't lock ranges, wait for ongoing lockless dio writes (as
801 * any in progress could create its ordered extents after we wait for
802 * existing ordered extents below).
804 inode_dio_wait(inode_in);
806 inode_dio_wait(inode_out);
809 * Workaround to make sure NOCOW buffered write reach disk as NOCOW.
811 * Btrfs' back references do not have a block level granularity, they
812 * work at the whole extent level.
813 * NOCOW buffered write without data space reserved may not be able
814 * to fall back to CoW due to lack of data space, thus could cause
817 * Here we take a shortcut by flushing the whole inode, so that all
818 * nocow write should reach disk as nocow before we increase the
819 * reference of the extent. We could do better by only flushing NOCOW
820 * data, but that needs extra accounting.
822 * Also we don't need to check ASYNC_EXTENT, as async extent will be
823 * CoWed anyway, not affecting nocow part.
825 ret = filemap_flush(inode_in->i_mapping);
829 ret = btrfs_wait_ordered_range(inode_in, ALIGN_DOWN(pos_in, bs),
833 ret = btrfs_wait_ordered_range(inode_out, ALIGN_DOWN(pos_out, bs),
838 return generic_remap_file_range_prep(file_in, pos_in, file_out, pos_out,
842 static bool file_sync_write(const struct file *file)
844 if (file->f_flags & (__O_SYNC | O_DSYNC))
846 if (IS_SYNC(file_inode(file)))
852 loff_t btrfs_remap_file_range(struct file *src_file, loff_t off,
853 struct file *dst_file, loff_t destoff, loff_t len,
854 unsigned int remap_flags)
856 struct inode *src_inode = file_inode(src_file);
857 struct inode *dst_inode = file_inode(dst_file);
858 bool same_inode = dst_inode == src_inode;
861 if (remap_flags & ~(REMAP_FILE_DEDUP | REMAP_FILE_ADVISORY))
865 btrfs_inode_lock(src_inode, BTRFS_ILOCK_MMAP);
867 lock_two_nondirectories(src_inode, dst_inode);
868 btrfs_double_mmap_lock(src_inode, dst_inode);
871 ret = btrfs_remap_file_range_prep(src_file, off, dst_file, destoff,
873 if (ret < 0 || len == 0)
876 if (remap_flags & REMAP_FILE_DEDUP)
877 ret = btrfs_extent_same(src_inode, off, len, dst_inode, destoff);
879 ret = btrfs_clone_files(dst_file, src_file, off, len, destoff);
883 btrfs_inode_unlock(src_inode, BTRFS_ILOCK_MMAP);
885 btrfs_double_mmap_unlock(src_inode, dst_inode);
886 unlock_two_nondirectories(src_inode, dst_inode);
890 * If either the source or the destination file was opened with O_SYNC,
891 * O_DSYNC or has the S_SYNC attribute, fsync both the destination and
892 * source files/ranges, so that after a successful return (0) followed
893 * by a power failure results in the reflinked data to be readable from
896 if (ret == 0 && len > 0 &&
897 (file_sync_write(src_file) || file_sync_write(dst_file))) {
898 ret = btrfs_sync_file(src_file, off, off + len - 1, 0);
900 ret = btrfs_sync_file(dst_file, destoff,
901 destoff + len - 1, 0);
904 return ret < 0 ? ret : len;