2 * libusb example program to measure Atmel SAM3U isochronous performance
3 * Copyright (C) 2012 Harald Welte <laforge@gnumonks.org>
5 * Copied with the author's permission under LGPL-2.1 from
6 * http://git.gnumonks.org/cgi-bin/gitweb.cgi?p=sam3u-tests.git;a=blob;f=usb-benchmark-project/host/benchmark.c;h=74959f7ee88f1597286cd435f312a8ff52c56b7e
8 * An Atmel SAM3U test firmware is also available in the above repository.
10 * This library is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU Lesser General Public
12 * License as published by the Free Software Foundation; either
13 * version 2.1 of the License, or (at your option) any later version.
15 * This library is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
18 * Lesser General Public License for more details.
20 * You should have received a copy of the GNU Lesser General Public
21 * License along with this library; if not, write to the Free Software
22 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
31 #ifdef HAVE_SYS_TIME_H
38 #define EP_DATA_IN 0x82
39 #define EP_ISO_IN 0x86
41 static volatile sig_atomic_t do_exit = 0;
42 static struct libusb_device_handle *devh = NULL;
44 static unsigned long num_bytes = 0, num_xfer = 0;
45 static struct timeval tv_start;
47 static void get_timestamp(struct timeval *tv)
49 #if defined(PLATFORM_WINDOWS)
50 static LARGE_INTEGER frequency;
51 LARGE_INTEGER counter;
53 if (!frequency.QuadPart)
54 QueryPerformanceFrequency(&frequency);
56 QueryPerformanceCounter(&counter);
57 counter.QuadPart *= 1000000;
58 counter.QuadPart /= frequency.QuadPart;
60 tv->tv_sec = (long)(counter.QuadPart / 1000000ULL);
61 tv->tv_usec = (long)(counter.QuadPart % 1000000ULL);
62 #elif defined(HAVE_CLOCK_GETTIME)
65 (void)clock_gettime(CLOCK_MONOTONIC, &ts);
66 tv->tv_sec = ts.tv_sec;
67 tv->tv_usec = (int)(ts.tv_nsec / 1000L);
69 gettimeofday(tv, NULL);
73 static void LIBUSB_CALL cb_xfr(struct libusb_transfer *xfr)
77 if (xfr->status != LIBUSB_TRANSFER_COMPLETED) {
78 fprintf(stderr, "transfer status %d\n", xfr->status);
79 libusb_free_transfer(xfr);
83 if (xfr->type == LIBUSB_TRANSFER_TYPE_ISOCHRONOUS) {
84 for (i = 0; i < xfr->num_iso_packets; i++) {
85 struct libusb_iso_packet_descriptor *pack = &xfr->iso_packet_desc[i];
87 if (pack->status != LIBUSB_TRANSFER_COMPLETED) {
88 fprintf(stderr, "Error: pack %d status %d\n", i, pack->status);
92 printf("pack%d length:%u, actual_length:%u\n", i, pack->length, pack->actual_length);
96 printf("length:%u, actual_length:%u\n", xfr->length, xfr->actual_length);
97 for (i = 0; i < xfr->actual_length; i++) {
98 printf("%02x", xfr->buffer[i]);
106 num_bytes += xfr->actual_length;
109 if (libusb_submit_transfer(xfr) < 0) {
110 fprintf(stderr, "error re-submitting URB\n");
115 static int benchmark_in(uint8_t ep)
117 static uint8_t buf[2048];
118 static struct libusb_transfer *xfr;
119 int num_iso_pack = 0;
124 xfr = libusb_alloc_transfer(num_iso_pack);
130 if (ep == EP_ISO_IN) {
131 libusb_fill_iso_transfer(xfr, devh, ep, buf,
132 sizeof(buf), num_iso_pack, cb_xfr, NULL, 0);
133 libusb_set_iso_packet_lengths(xfr, sizeof(buf)/num_iso_pack);
135 libusb_fill_bulk_transfer(xfr, devh, ep, buf,
136 sizeof(buf), cb_xfr, NULL, 0);
138 get_timestamp(&tv_start);
140 /* NOTE: To reach maximum possible performance the program must
141 * submit *multiple* transfers here, not just one.
143 * When only one transfer is submitted there is a gap in the bus
144 * schedule from when the transfer completes until a new transfer
145 * is submitted by the callback. This causes some jitter for
146 * isochronous transfers and loss of throughput for bulk transfers.
148 * This is avoided by queueing multiple transfers in advance, so
149 * that the host controller is always kept busy, and will schedule
150 * more transfers on the bus while the callback is running for
151 * transfers which have completed on the bus.
154 return libusb_submit_transfer(xfr);
157 static void measure(void)
159 struct timeval tv_stop;
160 unsigned long diff_msec;
162 get_timestamp(&tv_stop);
164 diff_msec = (tv_stop.tv_sec - tv_start.tv_sec) * 1000L;
165 diff_msec += (tv_stop.tv_usec - tv_start.tv_usec) / 1000L;
167 printf("%lu transfers (total %lu bytes) in %lu milliseconds => %lu bytes/sec\n",
168 num_xfer, num_bytes, diff_msec, (num_bytes * 1000L) / diff_msec);
171 static void sig_hdlr(int signum)
183 #if defined(PLATFORM_POSIX)
184 struct sigaction sigact;
186 sigact.sa_handler = sig_hdlr;
187 sigemptyset(&sigact.sa_mask);
189 (void)sigaction(SIGINT, &sigact, NULL);
191 (void)signal(SIGINT, sig_hdlr);
194 rc = libusb_init(NULL);
196 fprintf(stderr, "Error initializing libusb: %s\n", libusb_error_name(rc));
200 devh = libusb_open_device_with_vid_pid(NULL, 0x16c0, 0x0763);
202 fprintf(stderr, "Error finding USB device\n");
206 rc = libusb_claim_interface(devh, 2);
208 fprintf(stderr, "Error claiming interface: %s\n", libusb_error_name(rc));
212 benchmark_in(EP_ISO_IN);
215 rc = libusb_handle_events(NULL);
216 if (rc != LIBUSB_SUCCESS)
220 /* Measurement has already been done by the signal handler. */
222 libusb_release_interface(devh, 2);