The current code for calculating the timeout in darwin_reenumerate_device_timeout...
[platform/upstream/libusb.git] / examples / sam3u_benchmark.c
1 /*
2  * libusb example program to measure Atmel SAM3U isochronous performance
3  * Copyright (C) 2012 Harald Welte <laforge@gnumonks.org>
4  *
5  * Copied with the author's permission under LGPL-2.1 from
6  * http://git.gnumonks.org/cgi-bin/gitweb.cgi?p=sam3u-tests.git;a=blob;f=usb-benchmark-project/host/benchmark.c;h=74959f7ee88f1597286cd435f312a8ff52c56b7e
7  *
8  * An Atmel SAM3U test firmware is also available in the above repository.
9  *
10  * This library is free software; you can redistribute it and/or
11  * modify it under the terms of the GNU Lesser General Public
12  * License as published by the Free Software Foundation; either
13  * version 2.1 of the License, or (at your option) any later version.
14  *
15  * This library is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
18  * Lesser General Public License for more details.
19  *
20  * You should have received a copy of the GNU Lesser General Public
21  * License along with this library; if not, write to the Free Software
22  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
23  */
24
25 #include <config.h>
26
27 #include <errno.h>
28 #include <signal.h>
29 #include <stdio.h>
30 #include <stdlib.h>
31 #ifdef HAVE_SYS_TIME_H
32 #include <sys/time.h>
33 #endif
34 #include <time.h>
35
36 #include "libusb.h"
37
38 #define EP_DATA_IN      0x82
39 #define EP_ISO_IN       0x86
40
41 static volatile sig_atomic_t do_exit = 0;
42 static struct libusb_device_handle *devh = NULL;
43
44 static unsigned long num_bytes = 0, num_xfer = 0;
45 static struct timeval tv_start;
46
47 static void get_timestamp(struct timeval *tv)
48 {
49 #if defined(PLATFORM_WINDOWS)
50         static LARGE_INTEGER frequency;
51         LARGE_INTEGER counter;
52
53         if (!frequency.QuadPart)
54                 QueryPerformanceFrequency(&frequency);
55
56         QueryPerformanceCounter(&counter);
57         counter.QuadPart *= 1000000;
58         counter.QuadPart /= frequency.QuadPart;
59
60         tv->tv_sec = (long)(counter.QuadPart / 1000000ULL);
61         tv->tv_usec = (long)(counter.QuadPart % 1000000ULL);
62 #elif defined(HAVE_CLOCK_GETTIME)
63         struct timespec ts;
64
65         (void)clock_gettime(CLOCK_MONOTONIC, &ts);
66         tv->tv_sec = ts.tv_sec;
67         tv->tv_usec = (int)(ts.tv_nsec / 1000L);
68 #else
69         gettimeofday(tv, NULL);
70 #endif
71 }
72
73 static void LIBUSB_CALL cb_xfr(struct libusb_transfer *xfr)
74 {
75         int i;
76
77         if (xfr->status != LIBUSB_TRANSFER_COMPLETED) {
78                 fprintf(stderr, "transfer status %d\n", xfr->status);
79                 libusb_free_transfer(xfr);
80                 exit(3);
81         }
82
83         if (xfr->type == LIBUSB_TRANSFER_TYPE_ISOCHRONOUS) {
84                 for (i = 0; i < xfr->num_iso_packets; i++) {
85                         struct libusb_iso_packet_descriptor *pack = &xfr->iso_packet_desc[i];
86
87                         if (pack->status != LIBUSB_TRANSFER_COMPLETED) {
88                                 fprintf(stderr, "Error: pack %d status %d\n", i, pack->status);
89                                 exit(5);
90                         }
91
92                         printf("pack%d length:%u, actual_length:%u\n", i, pack->length, pack->actual_length);
93                 }
94         }
95
96         printf("length:%u, actual_length:%u\n", xfr->length, xfr->actual_length);
97         for (i = 0; i < xfr->actual_length; i++) {
98                 printf("%02x", xfr->buffer[i]);
99                 if (i % 16)
100                         printf("\n");
101                 else if (i % 8)
102                         printf("  ");
103                 else
104                         printf(" ");
105         }
106         num_bytes += xfr->actual_length;
107         num_xfer++;
108
109         if (libusb_submit_transfer(xfr) < 0) {
110                 fprintf(stderr, "error re-submitting URB\n");
111                 exit(1);
112         }
113 }
114
115 static int benchmark_in(uint8_t ep)
116 {
117         static uint8_t buf[2048];
118         static struct libusb_transfer *xfr;
119         int num_iso_pack = 0;
120
121         if (ep == EP_ISO_IN)
122                 num_iso_pack = 16;
123
124         xfr = libusb_alloc_transfer(num_iso_pack);
125         if (!xfr)
126                 return -ENOMEM;
127
128         if (ep == EP_ISO_IN) {
129                 libusb_fill_iso_transfer(xfr, devh, ep, buf,
130                                 sizeof(buf), num_iso_pack, cb_xfr, NULL, 0);
131                 libusb_set_iso_packet_lengths(xfr, sizeof(buf)/num_iso_pack);
132         } else
133                 libusb_fill_bulk_transfer(xfr, devh, ep, buf,
134                                 sizeof(buf), cb_xfr, NULL, 0);
135
136         get_timestamp(&tv_start);
137
138         /* NOTE: To reach maximum possible performance the program must
139          * submit *multiple* transfers here, not just one.
140          *
141          * When only one transfer is submitted there is a gap in the bus
142          * schedule from when the transfer completes until a new transfer
143          * is submitted by the callback. This causes some jitter for
144          * isochronous transfers and loss of throughput for bulk transfers.
145          *
146          * This is avoided by queueing multiple transfers in advance, so
147          * that the host controller is always kept busy, and will schedule
148          * more transfers on the bus while the callback is running for
149          * transfers which have completed on the bus.
150          */
151
152         return libusb_submit_transfer(xfr);
153 }
154
155 static void measure(void)
156 {
157         struct timeval tv_stop;
158         unsigned long diff_msec;
159
160         get_timestamp(&tv_stop);
161
162         diff_msec = (tv_stop.tv_sec - tv_start.tv_sec) * 1000L;
163         diff_msec += (tv_stop.tv_usec - tv_start.tv_usec) / 1000L;
164
165         printf("%lu transfers (total %lu bytes) in %lu milliseconds => %lu bytes/sec\n",
166                 num_xfer, num_bytes, diff_msec, (num_bytes * 1000L) / diff_msec);
167 }
168
169 static void sig_hdlr(int signum)
170 {
171         (void)signum;
172
173         measure();
174         do_exit = 1;
175 }
176
177 int main(void)
178 {
179         int rc;
180
181 #if defined(PLATFORM_POSIX)
182         struct sigaction sigact;
183
184         sigact.sa_handler = sig_hdlr;
185         sigemptyset(&sigact.sa_mask);
186         sigact.sa_flags = 0;
187         (void)sigaction(SIGINT, &sigact, NULL);
188 #else
189         (void)signal(SIGINT, sig_hdlr);
190 #endif
191
192         rc = libusb_init(NULL);
193         if (rc < 0) {
194                 fprintf(stderr, "Error initializing libusb: %s\n", libusb_error_name(rc));
195                 exit(1);
196         }
197
198         devh = libusb_open_device_with_vid_pid(NULL, 0x16c0, 0x0763);
199         if (!devh) {
200                 fprintf(stderr, "Error finding USB device\n");
201                 goto out;
202         }
203
204         rc = libusb_claim_interface(devh, 2);
205         if (rc < 0) {
206                 fprintf(stderr, "Error claiming interface: %s\n", libusb_error_name(rc));
207                 goto out;
208         }
209
210         benchmark_in(EP_ISO_IN);
211
212         while (!do_exit) {
213                 rc = libusb_handle_events(NULL);
214                 if (rc != LIBUSB_SUCCESS)
215                         break;
216         }
217
218         /* Measurement has already been done by the signal handler. */
219
220         libusb_release_interface(devh, 2);
221 out:
222         if (devh)
223                 libusb_close(devh);
224         libusb_exit(NULL);
225         return rc;
226 }