1 // SPDX-License-Identifier: GPL-2.0+
3 * Copyright (c) 2011 The Chromium OS Authors.
12 #include <asm/system.h>
16 #include <asm/arch/clock.h>
17 #include <asm/arch/funcmux.h>
18 #include <asm/arch/pinmux.h>
19 #include <asm/arch/pwm.h>
20 #include <asm/arch/display.h>
21 #include <asm/arch-tegra/timer.h>
23 DECLARE_GLOBAL_DATA_PTR;
25 /* Information about the display controller */
26 struct tegra_lcd_priv {
27 int width; /* width in pixels */
28 int height; /* height in pixels */
29 enum video_log2_bpp log2_bpp; /* colour depth */
30 struct display_timing timing;
31 struct udevice *panel;
32 struct disp_ctlr *disp; /* Display controller to use */
33 fdt_addr_t frame_buffer; /* Address of frame buffer */
34 unsigned pixel_clock; /* Pixel clock in Hz */
38 /* Maximum LCD size we support */
41 LCD_MAX_LOG2_BPP = VIDEO_BPP16,
44 static void update_window(struct dc_ctlr *dc, struct disp_ctl_win *win)
46 unsigned h_dda, v_dda;
49 val = readl(&dc->cmd.disp_win_header);
50 val |= WINDOW_A_SELECT;
51 writel(val, &dc->cmd.disp_win_header);
53 writel(win->fmt, &dc->win.color_depth);
55 clrsetbits_le32(&dc->win.byte_swap, BYTE_SWAP_MASK,
56 BYTE_SWAP_NOSWAP << BYTE_SWAP_SHIFT);
58 val = win->out_x << H_POSITION_SHIFT;
59 val |= win->out_y << V_POSITION_SHIFT;
60 writel(val, &dc->win.pos);
62 val = win->out_w << H_SIZE_SHIFT;
63 val |= win->out_h << V_SIZE_SHIFT;
64 writel(val, &dc->win.size);
66 val = (win->w * win->bpp / 8) << H_PRESCALED_SIZE_SHIFT;
67 val |= win->h << V_PRESCALED_SIZE_SHIFT;
68 writel(val, &dc->win.prescaled_size);
70 writel(0, &dc->win.h_initial_dda);
71 writel(0, &dc->win.v_initial_dda);
73 h_dda = (win->w * 0x1000) / max(win->out_w - 1, 1U);
74 v_dda = (win->h * 0x1000) / max(win->out_h - 1, 1U);
76 val = h_dda << H_DDA_INC_SHIFT;
77 val |= v_dda << V_DDA_INC_SHIFT;
78 writel(val, &dc->win.dda_increment);
80 writel(win->stride, &dc->win.line_stride);
81 writel(0, &dc->win.buf_stride);
86 writel(val, &dc->win.win_opt);
88 writel((unsigned long)win->phys_addr, &dc->winbuf.start_addr);
89 writel(win->x, &dc->winbuf.addr_h_offset);
90 writel(win->y, &dc->winbuf.addr_v_offset);
92 writel(0xff00, &dc->win.blend_nokey);
93 writel(0xff00, &dc->win.blend_1win);
95 val = GENERAL_ACT_REQ | WIN_A_ACT_REQ;
96 val |= GENERAL_UPDATE | WIN_A_UPDATE;
97 writel(val, &dc->cmd.state_ctrl);
100 static int update_display_mode(struct dc_disp_reg *disp,
101 struct tegra_lcd_priv *priv)
103 struct display_timing *dt = &priv->timing;
108 writel(0x0, &disp->disp_timing_opt);
110 writel(1 | 1 << 16, &disp->ref_to_sync);
111 writel(dt->hsync_len.typ | dt->vsync_len.typ << 16, &disp->sync_width);
112 writel(dt->hback_porch.typ | dt->vback_porch.typ << 16,
114 writel((dt->hfront_porch.typ - 1) | (dt->vfront_porch.typ - 1) << 16,
116 writel(dt->hactive.typ | (dt->vactive.typ << 16), &disp->disp_active);
118 val = DE_SELECT_ACTIVE << DE_SELECT_SHIFT;
119 val |= DE_CONTROL_NORMAL << DE_CONTROL_SHIFT;
120 writel(val, &disp->data_enable_opt);
122 val = DATA_FORMAT_DF1P1C << DATA_FORMAT_SHIFT;
123 val |= DATA_ALIGNMENT_MSB << DATA_ALIGNMENT_SHIFT;
124 val |= DATA_ORDER_RED_BLUE << DATA_ORDER_SHIFT;
125 writel(val, &disp->disp_interface_ctrl);
128 * The pixel clock divider is in 7.1 format (where the bottom bit
129 * represents 0.5). Here we calculate the divider needed to get from
130 * the display clock (typically 600MHz) to the pixel clock. We round
131 * up or down as requried.
133 rate = clock_get_periph_rate(PERIPH_ID_DISP1, CLOCK_ID_CGENERAL);
134 div = ((rate * 2 + priv->pixel_clock / 2) / priv->pixel_clock) - 2;
135 debug("Display clock %lu, divider %lu\n", rate, div);
137 writel(0x00010001, &disp->shift_clk_opt);
139 val = PIXEL_CLK_DIVIDER_PCD1 << PIXEL_CLK_DIVIDER_SHIFT;
140 val |= div << SHIFT_CLK_DIVIDER_SHIFT;
141 writel(val, &disp->disp_clk_ctrl);
146 /* Start up the display and turn on power to PWMs */
147 static void basic_init(struct dc_cmd_reg *cmd)
151 writel(0x00000100, &cmd->gen_incr_syncpt_ctrl);
152 writel(0x0000011a, &cmd->cont_syncpt_vsync);
153 writel(0x00000000, &cmd->int_type);
154 writel(0x00000000, &cmd->int_polarity);
155 writel(0x00000000, &cmd->int_mask);
156 writel(0x00000000, &cmd->int_enb);
158 val = PW0_ENABLE | PW1_ENABLE | PW2_ENABLE;
159 val |= PW3_ENABLE | PW4_ENABLE | PM0_ENABLE;
161 writel(val, &cmd->disp_pow_ctrl);
163 val = readl(&cmd->disp_cmd);
164 val |= CTRL_MODE_C_DISPLAY << CTRL_MODE_SHIFT;
165 writel(val, &cmd->disp_cmd);
168 static void basic_init_timer(struct dc_disp_reg *disp)
170 writel(0x00000020, &disp->mem_high_pri);
171 writel(0x00000001, &disp->mem_high_pri_timer);
174 static const u32 rgb_enb_tab[PIN_REG_COUNT] = {
181 static const u32 rgb_polarity_tab[PIN_REG_COUNT] = {
188 static const u32 rgb_data_tab[PIN_REG_COUNT] = {
195 static const u32 rgb_sel_tab[PIN_OUTPUT_SEL_COUNT] = {
205 static void rgb_enable(struct dc_com_reg *com)
209 for (i = 0; i < PIN_REG_COUNT; i++) {
210 writel(rgb_enb_tab[i], &com->pin_output_enb[i]);
211 writel(rgb_polarity_tab[i], &com->pin_output_polarity[i]);
212 writel(rgb_data_tab[i], &com->pin_output_data[i]);
215 for (i = 0; i < PIN_OUTPUT_SEL_COUNT; i++)
216 writel(rgb_sel_tab[i], &com->pin_output_sel[i]);
219 static int setup_window(struct disp_ctl_win *win,
220 struct tegra_lcd_priv *priv)
224 win->w = priv->width;
225 win->h = priv->height;
228 win->out_w = priv->width;
229 win->out_h = priv->height;
230 win->phys_addr = priv->frame_buffer;
231 win->stride = priv->width * (1 << priv->log2_bpp) / 8;
232 debug("%s: depth = %d\n", __func__, priv->log2_bpp);
233 switch (priv->log2_bpp) {
235 win->fmt = COLOR_DEPTH_R8G8B8A8;
239 win->fmt = COLOR_DEPTH_B5G6R5;
244 debug("Unsupported LCD bit depth");
252 * Register a new display based on device tree configuration.
254 * The frame buffer can be positioned by U-Boot or overridden by the fdt.
255 * You should pass in the U-Boot address here, and check the contents of
256 * struct tegra_lcd_priv to see what was actually chosen.
258 * @param blob Device tree blob
259 * @param priv Driver's private data
260 * @param default_lcd_base Default address of LCD frame buffer
261 * @return 0 if ok, -1 on error (unsupported bits per pixel)
263 static int tegra_display_probe(const void *blob, struct tegra_lcd_priv *priv,
264 void *default_lcd_base)
266 struct disp_ctl_win window;
269 priv->frame_buffer = (u32)default_lcd_base;
271 dc = (struct dc_ctlr *)priv->disp;
274 * A header file for clock constants was NAKed upstream.
275 * TODO: Put this into the FDT and fdt_lcd struct when we have clock
278 clock_start_periph_pll(PERIPH_ID_HOST1X, CLOCK_ID_PERIPH,
280 clock_start_periph_pll(PERIPH_ID_DISP1, CLOCK_ID_CGENERAL,
282 basic_init(&dc->cmd);
283 basic_init_timer(&dc->disp);
284 rgb_enable(&dc->com);
286 if (priv->pixel_clock)
287 update_display_mode(&dc->disp, priv);
289 if (setup_window(&window, priv))
292 update_window(dc, &window);
297 static int tegra_lcd_probe(struct udevice *dev)
299 struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
300 struct video_priv *uc_priv = dev_get_uclass_priv(dev);
301 struct tegra_lcd_priv *priv = dev_get_priv(dev);
302 const void *blob = gd->fdt_blob;
305 /* Initialize the Tegra display controller */
306 funcmux_select(PERIPH_ID_DISP1, FUNCMUX_DEFAULT);
307 if (tegra_display_probe(blob, priv, (void *)plat->base)) {
308 printf("%s: Failed to probe display driver\n", __func__);
312 pinmux_set_func(PMUX_PINGRP_GPU, PMUX_FUNC_PWM);
313 pinmux_tristate_disable(PMUX_PINGRP_GPU);
315 ret = panel_enable_backlight(priv->panel);
317 debug("%s: Cannot enable backlight, ret=%d\n", __func__, ret);
321 mmu_set_region_dcache_behaviour(priv->frame_buffer, plat->size,
322 DCACHE_WRITETHROUGH);
324 /* Enable flushing after LCD writes if requested */
325 video_set_flush_dcache(dev, true);
327 uc_priv->xsize = priv->width;
328 uc_priv->ysize = priv->height;
329 uc_priv->bpix = priv->log2_bpp;
330 debug("LCD frame buffer at %pa, size %x\n", &priv->frame_buffer,
336 static int tegra_lcd_ofdata_to_platdata(struct udevice *dev)
338 struct tegra_lcd_priv *priv = dev_get_priv(dev);
339 const void *blob = gd->fdt_blob;
340 struct display_timing *timing;
341 int node = dev_of_offset(dev);
346 priv->disp = (struct disp_ctlr *)devfdt_get_addr(dev);
348 debug("%s: No display controller address\n", __func__);
352 rgb = fdt_subnode_offset(blob, node, "rgb");
354 debug("%s: Cannot find rgb subnode for '%s' (ret=%d)\n",
355 __func__, dev->name, rgb);
359 ret = fdtdec_decode_display_timing(blob, rgb, 0, &priv->timing);
361 debug("%s: Cannot read display timing for '%s' (ret=%d)\n",
362 __func__, dev->name, ret);
365 timing = &priv->timing;
366 priv->width = timing->hactive.typ;
367 priv->height = timing->vactive.typ;
368 priv->pixel_clock = timing->pixelclock.typ;
369 priv->log2_bpp = VIDEO_BPP16;
372 * Sadly the panel phandle is in an rgb subnode so we cannot use
373 * uclass_get_device_by_phandle().
375 panel_node = fdtdec_lookup_phandle(blob, rgb, "nvidia,panel");
376 if (panel_node < 0) {
377 debug("%s: Cannot find panel information\n", __func__);
380 ret = uclass_get_device_by_of_offset(UCLASS_PANEL, panel_node,
383 debug("%s: Cannot find panel for '%s' (ret=%d)\n", __func__,
391 static int tegra_lcd_bind(struct udevice *dev)
393 struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
394 const void *blob = gd->fdt_blob;
395 int node = dev_of_offset(dev);
398 rgb = fdt_subnode_offset(blob, node, "rgb");
399 if ((rgb < 0) || !fdtdec_get_is_enabled(blob, rgb))
402 plat->size = LCD_MAX_WIDTH * LCD_MAX_HEIGHT *
403 (1 << LCD_MAX_LOG2_BPP) / 8;
408 static const struct video_ops tegra_lcd_ops = {
411 static const struct udevice_id tegra_lcd_ids[] = {
412 { .compatible = "nvidia,tegra20-dc" },
416 U_BOOT_DRIVER(tegra_lcd) = {
419 .of_match = tegra_lcd_ids,
420 .ops = &tegra_lcd_ops,
421 .bind = tegra_lcd_bind,
422 .probe = tegra_lcd_probe,
423 .ofdata_to_platdata = tegra_lcd_ofdata_to_platdata,
424 .priv_auto_alloc_size = sizeof(struct tegra_lcd_priv),