drivers/video/s3c2410fb.c

   1 /* linux/drivers/video/s3c2410fb.c
   2  *      Copyright (c) 2004,2005 Arnaud Patard
   3  *      Copyright (c) 2004-2008 Ben Dooks
   4  *
   5  * S3C2410 LCD Framebuffer Driver
   6  *
   7  * This file is subject to the terms and conditions of the GNU General Public
   8  * License.  See the file COPYING in the main directory of this archive for
   9  * more details.
  10  *
  11  * Driver based on skeletonfb.c, sa1100fb.c and others.
  12 */
  13
  14 #include <linux/module.h>
  15 #include <linux/kernel.h>
  16 #include <linux/err.h>
  17 #include <linux/errno.h>
  18 #include <linux/string.h>
  19 #include <linux/mm.h>
  20 #include <linux/slab.h>
  21 #include <linux/delay.h>
  22 #include <linux/fb.h>
  23 #include <linux/init.h>
  24 #include <linux/dma-mapping.h>
  25 #include <linux/interrupt.h>
  26 #include <linux/platform_device.h>
  27 #include <linux/clk.h>
  28 #include <linux/cpufreq.h>
  29 #include <linux/io.h>
  30
  31 #include <asm/div64.h>
  32
  33 #include <asm/mach/map.h>
  34 #include <mach/regs-lcd.h>
  35 #include <mach/regs-gpio.h>
  36 #include <mach/fb.h>
  37
  38 #ifdef CONFIG_PM
  39 #include <linux/pm.h>
  40 #endif
  41
  42 #include "s3c2410fb.h"
  43
  44 /* Debugging stuff */
  45 #ifdef CONFIG_FB_S3C2410_DEBUG
  46 static int debug        = 1;
  47 #else
  48 static int debug;
  49 #endif
  50
  51 #define dprintk(msg...) if (debug) printk(KERN_DEBUG "s3c2410fb: " msg);
  52
  53 /* useful functions */
  54
  55 static int is_s3c2412(struct s3c2410fb_info *fbi)
  56 {
  57         return (fbi->drv_type == DRV_S3C2412);
  58 }
  59
  60 /* s3c2410fb_set_lcdaddr
  61  *
  62  * initialise lcd controller address pointers
  63  */
  64 static void s3c2410fb_set_lcdaddr(struct fb_info *info)
  65 {
  66         unsigned long saddr1, saddr2, saddr3;
  67         struct s3c2410fb_info *fbi = info->par;
  68         void __iomem *regs = fbi->io;
  69
  70         saddr1  = info->fix.smem_start >> 1;
  71         saddr2  = info->fix.smem_start;
  72         saddr2 += info->fix.line_length * info->var.yres;
  73         saddr2 >>= 1;
  74
  75         saddr3 = S3C2410_OFFSIZE(0) |
  76                  S3C2410_PAGEWIDTH((info->fix.line_length / 2) & 0x3ff);
  77
  78         dprintk("LCDSADDR1 = 0x%08lx\n", saddr1);
  79         dprintk("LCDSADDR2 = 0x%08lx\n", saddr2);
  80         dprintk("LCDSADDR3 = 0x%08lx\n", saddr3);
  81
  82         writel(saddr1, regs + S3C2410_LCDSADDR1);
  83         writel(saddr2, regs + S3C2410_LCDSADDR2);
  84         writel(saddr3, regs + S3C2410_LCDSADDR3);
  85 }
  86
  87 /* s3c2410fb_calc_pixclk()
  88  *
  89  * calculate divisor for clk->pixclk
  90  */
  91 static unsigned int s3c2410fb_calc_pixclk(struct s3c2410fb_info *fbi,
  92                                           unsigned long pixclk)
  93 {
  94         unsigned long clk = fbi->clk_rate;
  95         unsigned long long div;
  96
  97         /* pixclk is in picoseconds, our clock is in Hz
  98          *
  99          * Hz -> picoseconds is / 10^-12
 100          */
 101
 102         div = (unsigned long long)clk * pixclk;
 103         div >>= 12;                     /* div / 2^12 */
 104         do_div(div, 625 * 625UL * 625); /* div / 5^12 */
 105
 106         dprintk("pixclk %ld, divisor is %ld\n", pixclk, (long)div);
 107         return div;
 108 }
 109
 110 /*
 111  *      s3c2410fb_check_var():
 112  *      Get the video params out of 'var'. If a value doesn't fit, round it up,
 113  *      if it's too big, return -EINVAL.
 114  *
 115  */
 116 static int s3c2410fb_check_var(struct fb_var_screeninfo *var,
 117                                struct fb_info *info)
 118 {
 119         struct s3c2410fb_info *fbi = info->par;
 120         struct s3c2410fb_mach_info *mach_info = fbi->dev->platform_data;
 121         struct s3c2410fb_display *display = NULL;
 122         struct s3c2410fb_display *default_display = mach_info->displays +
 123                                                     mach_info->default_display;
 124         int type = default_display->type;
 125         unsigned i;
 126
 127         dprintk("check_var(var=%p, info=%p)\n", var, info);
 128
 129         /* validate x/y resolution */
 130         /* choose default mode if possible */
 131         if (var->yres == default_display->yres &&
 132             var->xres == default_display->xres &&
 133             var->bits_per_pixel == default_display->bpp)
 134                 display = default_display;
 135         else
 136                 for (i = 0; i < mach_info->num_displays; i++)
 137                         if (type == mach_info->displays[i].type &&
 138                             var->yres == mach_info->displays[i].yres &&
 139                             var->xres == mach_info->displays[i].xres &&
 140                             var->bits_per_pixel == mach_info->displays[i].bpp) {
 141                                 display = mach_info->displays + i;
 142                                 break;
 143                         }
 144
 145         if (!display) {
 146                 dprintk("wrong resolution or depth %dx%d at %d bpp\n",
 147                         var->xres, var->yres, var->bits_per_pixel);
 148                 return -EINVAL;
 149         }
 150
 151         /* it is always the size as the display */
 152         var->xres_virtual = display->xres;
 153         var->yres_virtual = display->yres;
 154         var->height = display->height;
 155         var->width = display->width;
 156
 157         /* copy lcd settings */
 158         var->pixclock = display->pixclock;
 159         var->left_margin = display->left_margin;
 160         var->right_margin = display->right_margin;
 161         var->upper_margin = display->upper_margin;
 162         var->lower_margin = display->lower_margin;
 163         var->vsync_len = display->vsync_len;
 164         var->hsync_len = display->hsync_len;
 165
 166         fbi->regs.lcdcon5 = display->lcdcon5;
 167         /* set display type */
 168         fbi->regs.lcdcon1 = display->type;
 169
 170         var->transp.offset = 0;
 171         var->transp.length = 0;
 172         /* set r/g/b positions */
 173         switch (var->bits_per_pixel) {
 174         case 1:
 175         case 2:
 176         case 4:
 177                 var->red.offset = 0;
 178                 var->red.length = var->bits_per_pixel;
 179                 var->green      = var->red;
 180                 var->blue       = var->red;
 181                 break;
 182         case 8:
 183                 if (display->type != S3C2410_LCDCON1_TFT) {
 184                         /* 8 bpp 332 */
 185                         var->red.length         = 3;
 186                         var->red.offset         = 5;
 187                         var->green.length       = 3;
 188                         var->green.offset       = 2;
 189                         var->blue.length        = 2;
 190                         var->blue.offset        = 0;
 191                 } else {
 192                         var->red.offset         = 0;
 193                         var->red.length         = 8;
 194                         var->green              = var->red;
 195                         var->blue               = var->red;
 196                 }
 197                 break;
 198         case 12:
 199                 /* 12 bpp 444 */
 200                 var->red.length         = 4;
 201                 var->red.offset         = 8;
 202                 var->green.length       = 4;
 203                 var->green.offset       = 4;
 204                 var->blue.length        = 4;
 205                 var->blue.offset        = 0;
 206                 break;
 207
 208         default:
 209         case 16:
 210                 if (display->lcdcon5 & S3C2410_LCDCON5_FRM565) {
 211                         /* 16 bpp, 565 format */
 212                         var->red.offset         = 11;
 213                         var->green.offset       = 5;
 214                         var->blue.offset        = 0;
 215                         var->red.length         = 5;
 216                         var->green.length       = 6;
 217                         var->blue.length        = 5;
 218                 } else {
 219                         /* 16 bpp, 5551 format */
 220                         var->red.offset         = 11;
 221                         var->green.offset       = 6;
 222                         var->blue.offset        = 1;
 223                         var->red.length         = 5;
 224                         var->green.length       = 5;
 225                         var->blue.length        = 5;
 226                 }
 227                 break;
 228         case 32:
 229                 /* 24 bpp 888 and 8 dummy */
 230                 var->red.length         = 8;
 231                 var->red.offset         = 16;
 232                 var->green.length       = 8;
 233                 var->green.offset       = 8;
 234                 var->blue.length        = 8;
 235                 var->blue.offset        = 0;
 236                 break;
 237         }
 238         return 0;
 239 }
 240
 241 /* s3c2410fb_calculate_stn_lcd_regs
 242  *
 243  * calculate register values from var settings
 244  */
 245 static void s3c2410fb_calculate_stn_lcd_regs(const struct fb_info *info,
 246                                              struct s3c2410fb_hw *regs)
 247 {
 248         const struct s3c2410fb_info *fbi = info->par;
 249         const struct fb_var_screeninfo *var = &info->var;
 250         int type = regs->lcdcon1 & ~S3C2410_LCDCON1_TFT;
 251         int hs = var->xres >> 2;
 252         unsigned wdly = (var->left_margin >> 4) - 1;
 253         unsigned wlh = (var->hsync_len >> 4) - 1;
 254
 255         if (type != S3C2410_LCDCON1_STN4)
 256                 hs >>= 1;
 257
 258         switch (var->bits_per_pixel) {
 259         case 1:
 260                 regs->lcdcon1 |= S3C2410_LCDCON1_STN1BPP;
 261                 break;
 262         case 2:
 263                 regs->lcdcon1 |= S3C2410_LCDCON1_STN2GREY;
 264                 break;
 265         case 4:
 266                 regs->lcdcon1 |= S3C2410_LCDCON1_STN4GREY;
 267                 break;
 268         case 8:
 269                 regs->lcdcon1 |= S3C2410_LCDCON1_STN8BPP;
 270                 hs *= 3;
 271                 break;
 272         case 12:
 273                 regs->lcdcon1 |= S3C2410_LCDCON1_STN12BPP;
 274                 hs *= 3;
 275                 break;
 276
 277         default:
 278                 /* invalid pixel depth */
 279                 dev_err(fbi->dev, "invalid bpp %d\n",
 280                         var->bits_per_pixel);
 281         }
 282         /* update X/Y info */
 283         dprintk("setting horz: lft=%d, rt=%d, sync=%d\n",
 284                 var->left_margin, var->right_margin, var->hsync_len);
 285
 286         regs->lcdcon2 = S3C2410_LCDCON2_LINEVAL(var->yres - 1);
 287
 288         if (wdly > 3)
 289                 wdly = 3;
 290
 291         if (wlh > 3)
 292                 wlh = 3;
 293
 294         regs->lcdcon3 = S3C2410_LCDCON3_WDLY(wdly) |
 295                         S3C2410_LCDCON3_LINEBLANK(var->right_margin / 8) |
 296                         S3C2410_LCDCON3_HOZVAL(hs - 1);
 297
 298         regs->lcdcon4 = S3C2410_LCDCON4_WLH(wlh);
 299 }
 300
 301 /* s3c2410fb_calculate_tft_lcd_regs
 302  *
 303  * calculate register values from var settings
 304  */
 305 static void s3c2410fb_calculate_tft_lcd_regs(const struct fb_info *info,
 306                                              struct s3c2410fb_hw *regs)
 307 {
 308         const struct s3c2410fb_info *fbi = info->par;
 309         const struct fb_var_screeninfo *var = &info->var;
 310
 311         switch (var->bits_per_pixel) {
 312         case 1:
 313                 regs->lcdcon1 |= S3C2410_LCDCON1_TFT1BPP;
 314                 break;
 315         case 2:
 316                 regs->lcdcon1 |= S3C2410_LCDCON1_TFT2BPP;
 317                 break;
 318         case 4:
 319                 regs->lcdcon1 |= S3C2410_LCDCON1_TFT4BPP;
 320                 break;
 321         case 8:
 322                 regs->lcdcon1 |= S3C2410_LCDCON1_TFT8BPP;
 323                 regs->lcdcon5 |= S3C2410_LCDCON5_BSWP |
 324                                  S3C2410_LCDCON5_FRM565;
 325                 regs->lcdcon5 &= ~S3C2410_LCDCON5_HWSWP;
 326                 break;
 327         case 16:
 328                 regs->lcdcon1 |= S3C2410_LCDCON1_TFT16BPP;
 329                 regs->lcdcon5 &= ~S3C2410_LCDCON5_BSWP;
 330                 regs->lcdcon5 |= S3C2410_LCDCON5_HWSWP;
 331                 break;
 332         case 32:
 333                 regs->lcdcon1 |= S3C2410_LCDCON1_TFT24BPP;
 334                 regs->lcdcon5 &= ~(S3C2410_LCDCON5_BSWP |
 335                                    S3C2410_LCDCON5_HWSWP |
 336                                    S3C2410_LCDCON5_BPP24BL);
 337                 break;
 338         default:
 339                 /* invalid pixel depth */
 340                 dev_err(fbi->dev, "invalid bpp %d\n",
 341                         var->bits_per_pixel);
 342         }
 343         /* update X/Y info */
 344         dprintk("setting vert: up=%d, low=%d, sync=%d\n",
 345                 var->upper_margin, var->lower_margin, var->vsync_len);
 346
 347         dprintk("setting horz: lft=%d, rt=%d, sync=%d\n",
 348                 var->left_margin, var->right_margin, var->hsync_len);
 349
 350         regs->lcdcon2 = S3C2410_LCDCON2_LINEVAL(var->yres - 1) |
 351                         S3C2410_LCDCON2_VBPD(var->upper_margin - 1) |
 352                         S3C2410_LCDCON2_VFPD(var->lower_margin - 1) |
 353                         S3C2410_LCDCON2_VSPW(var->vsync_len - 1);
 354
 355         regs->lcdcon3 = S3C2410_LCDCON3_HBPD(var->right_margin - 1) |
 356                         S3C2410_LCDCON3_HFPD(var->left_margin - 1) |
 357                         S3C2410_LCDCON3_HOZVAL(var->xres - 1);
 358
 359         regs->lcdcon4 = S3C2410_LCDCON4_HSPW(var->hsync_len - 1);
 360 }
 361
 362 /* s3c2410fb_activate_var
 363  *
 364  * activate (set) the controller from the given framebuffer
 365  * information
 366  */
 367 static void s3c2410fb_activate_var(struct fb_info *info)
 368 {
 369         struct s3c2410fb_info *fbi = info->par;
 370         void __iomem *regs = fbi->io;
 371         int type = fbi->regs.lcdcon1 & S3C2410_LCDCON1_TFT;
 372         struct fb_var_screeninfo *var = &info->var;
 373         int clkdiv;
 374
 375         clkdiv = DIV_ROUND_UP(s3c2410fb_calc_pixclk(fbi, var->pixclock), 2);
 376
 377         dprintk("%s: var->xres  = %d\n", __func__, var->xres);
 378         dprintk("%s: var->yres  = %d\n", __func__, var->yres);
 379         dprintk("%s: var->bpp   = %d\n", __func__, var->bits_per_pixel);
 380
 381         if (type == S3C2410_LCDCON1_TFT) {
 382                 s3c2410fb_calculate_tft_lcd_regs(info, &fbi->regs);
 383                 --clkdiv;
 384                 if (clkdiv < 0)
 385                         clkdiv = 0;
 386         } else {
 387                 s3c2410fb_calculate_stn_lcd_regs(info, &fbi->regs);
 388                 if (clkdiv < 2)
 389                         clkdiv = 2;
 390         }
 391
 392         fbi->regs.lcdcon1 |=  S3C2410_LCDCON1_CLKVAL(clkdiv);
 393
 394         /* write new registers */
 395
 396         dprintk("new register set:\n");
 397         dprintk("lcdcon[1] = 0x%08lx\n", fbi->regs.lcdcon1);
 398         dprintk("lcdcon[2] = 0x%08lx\n", fbi->regs.lcdcon2);
 399         dprintk("lcdcon[3] = 0x%08lx\n", fbi->regs.lcdcon3);
 400         dprintk("lcdcon[4] = 0x%08lx\n", fbi->regs.lcdcon4);
 401         dprintk("lcdcon[5] = 0x%08lx\n", fbi->regs.lcdcon5);
 402
 403         writel(fbi->regs.lcdcon1 & ~S3C2410_LCDCON1_ENVID,
 404                 regs + S3C2410_LCDCON1);
 405         writel(fbi->regs.lcdcon2, regs + S3C2410_LCDCON2);
 406         writel(fbi->regs.lcdcon3, regs + S3C2410_LCDCON3);
 407         writel(fbi->regs.lcdcon4, regs + S3C2410_LCDCON4);
 408         writel(fbi->regs.lcdcon5, regs + S3C2410_LCDCON5);
 409
 410         /* set lcd address pointers */
 411         s3c2410fb_set_lcdaddr(info);
 412
 413         fbi->regs.lcdcon1 |= S3C2410_LCDCON1_ENVID,
 414         writel(fbi->regs.lcdcon1, regs + S3C2410_LCDCON1);
 415 }
 416
 417 /*
 418  *      s3c2410fb_set_par - Alters the hardware state.
 419  *      @info: frame buffer structure that represents a single frame buffer
 420  *
 421  */
 422 static int s3c2410fb_set_par(struct fb_info *info)
 423 {
 424         struct fb_var_screeninfo *var = &info->var;
 425
 426         switch (var->bits_per_pixel) {
 427         case 32:
 428         case 16:
 429         case 12:
 430                 info->fix.visual = FB_VISUAL_TRUECOLOR;
 431                 break;
 432         case 1:
 433                 info->fix.visual = FB_VISUAL_MONO01;
 434                 break;
 435         default:
 436                 info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
 437                 break;
 438         }
 439
 440         info->fix.line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
 441
 442         /* activate this new configuration */
 443
 444         s3c2410fb_activate_var(info);
 445         return 0;
 446 }
 447
 448 static void schedule_palette_update(struct s3c2410fb_info *fbi,
 449                                     unsigned int regno, unsigned int val)
 450 {
 451         unsigned long flags;
 452         unsigned long irqen;
 453         void __iomem *irq_base = fbi->irq_base;
 454
 455         local_irq_save(flags);
 456
 457         fbi->palette_buffer[regno] = val;
 458
 459         if (!fbi->palette_ready) {
 460                 fbi->palette_ready = 1;
 461
 462                 /* enable IRQ */
 463                 irqen = readl(irq_base + S3C24XX_LCDINTMSK);
 464                 irqen &= ~S3C2410_LCDINT_FRSYNC;
 465                 writel(irqen, irq_base + S3C24XX_LCDINTMSK);
 466         }
 467
 468         local_irq_restore(flags);
 469 }
 470
 471 /* from pxafb.c */
 472 static inline unsigned int chan_to_field(unsigned int chan,
 473                                          struct fb_bitfield *bf)
 474 {
 475         chan &= 0xffff;
 476         chan >>= 16 - bf->length;
 477         return chan << bf->offset;
 478 }
 479
 480 static int s3c2410fb_setcolreg(unsigned regno,
 481                                unsigned red, unsigned green, unsigned blue,
 482                                unsigned transp, struct fb_info *info)
 483 {
 484         struct s3c2410fb_info *fbi = info->par;
 485         void __iomem *regs = fbi->io;
 486         unsigned int val;
 487
 488         /* dprintk("setcol: regno=%d, rgb=%d,%d,%d\n",
 489                    regno, red, green, blue); */
 490
 491         switch (info->fix.visual) {
 492         case FB_VISUAL_TRUECOLOR:
 493                 /* true-colour, use pseudo-palette */
 494
 495                 if (regno < 16) {
 496                         u32 *pal = info->pseudo_palette;
 497
 498                         val  = chan_to_field(red,   &info->var.red);
 499                         val |= chan_to_field(green, &info->var.green);
 500                         val |= chan_to_field(blue,  &info->var.blue);
 501
 502                         pal[regno] = val;
 503                 }
 504                 break;
 505
 506         case FB_VISUAL_PSEUDOCOLOR:
 507                 if (regno < 256) {
 508                         /* currently assume RGB 5-6-5 mode */
 509
 510                         val  = (red   >>  0) & 0xf800;
 511                         val |= (green >>  5) & 0x07e0;
 512                         val |= (blue  >> 11) & 0x001f;
 513
 514                         writel(val, regs + S3C2410_TFTPAL(regno));
 515                         schedule_palette_update(fbi, regno, val);
 516                 }
 517
 518                 break;
 519
 520         default:
 521                 return 1;       /* unknown type */
 522         }
 523
 524         return 0;
 525 }
 526
 527 /* s3c2410fb_lcd_enable
 528  *
 529  * shutdown the lcd controller
 530  */
 531 static void s3c2410fb_lcd_enable(struct s3c2410fb_info *fbi, int enable)
 532 {
 533         unsigned long flags;
 534
 535         local_irq_save(flags);
 536
 537         if (enable)
 538                 fbi->regs.lcdcon1 |= S3C2410_LCDCON1_ENVID;
 539         else
 540                 fbi->regs.lcdcon1 &= ~S3C2410_LCDCON1_ENVID;
 541
 542         writel(fbi->regs.lcdcon1, fbi->io + S3C2410_LCDCON1);
 543
 544         local_irq_restore(flags);
 545 }
 546
 547
 548 /*
 549  *      s3c2410fb_blank
 550  *      @blank_mode: the blank mode we want.
 551  *      @info: frame buffer structure that represents a single frame buffer
 552  *
 553  *      Blank the screen if blank_mode != 0, else unblank. Return 0 if
 554  *      blanking succeeded, != 0 if un-/blanking failed due to e.g. a
 555  *      video mode which doesn't support it. Implements VESA suspend
 556  *      and powerdown modes on hardware that supports disabling hsync/vsync:
 557  *
 558  *      Returns negative errno on error, or zero on success.
 559  *
 560  */
 561 static int s3c2410fb_blank(int blank_mode, struct fb_info *info)
 562 {
 563         struct s3c2410fb_info *fbi = info->par;
 564         void __iomem *tpal_reg = fbi->io;
 565
 566         dprintk("blank(mode=%d, info=%p)\n", blank_mode, info);
 567
 568         tpal_reg += is_s3c2412(fbi) ? S3C2412_TPAL : S3C2410_TPAL;
 569
 570         if (blank_mode == FB_BLANK_POWERDOWN)
 571                 s3c2410fb_lcd_enable(fbi, 0);
 572         else
 573                 s3c2410fb_lcd_enable(fbi, 1);
 574
 575         if (blank_mode == FB_BLANK_UNBLANK)
 576                 writel(0x0, tpal_reg);
 577         else {
 578                 dprintk("setting TPAL to output 0x000000\n");
 579                 writel(S3C2410_TPAL_EN, tpal_reg);
 580         }
 581
 582         return 0;
 583 }
 584
 585 static int s3c2410fb_debug_show(struct device *dev,
 586                                 struct device_attribute *attr, char *buf)
 587 {
 588         return snprintf(buf, PAGE_SIZE, "%s\n", debug ? "on" : "off");
 589 }
 590
 591 static int s3c2410fb_debug_store(struct device *dev,
 592                                  struct device_attribute *attr,
 593                                  const char *buf, size_t len)
 594 {
 595         if (len < 1)
 596                 return -EINVAL;
 597
 598         if (strnicmp(buf, "on", 2) == 0 ||
 599             strnicmp(buf, "1", 1) == 0) {
 600                 debug = 1;
 601                 printk(KERN_DEBUG "s3c2410fb: Debug On");
 602         } else if (strnicmp(buf, "off", 3) == 0 ||
 603                    strnicmp(buf, "0", 1) == 0) {
 604                 debug = 0;
 605                 printk(KERN_DEBUG "s3c2410fb: Debug Off");
 606         } else {
 607                 return -EINVAL;
 608         }
 609
 610         return len;
 611 }
 612
 613 static DEVICE_ATTR(debug, 0666, s3c2410fb_debug_show, s3c2410fb_debug_store);
 614
 615 static struct fb_ops s3c2410fb_ops = {
 616         .owner          = THIS_MODULE,
 617         .fb_check_var   = s3c2410fb_check_var,
 618         .fb_set_par     = s3c2410fb_set_par,
 619         .fb_blank       = s3c2410fb_blank,
 620         .fb_setcolreg   = s3c2410fb_setcolreg,
 621         .fb_fillrect    = cfb_fillrect,
 622         .fb_copyarea    = cfb_copyarea,
 623         .fb_imageblit   = cfb_imageblit,
 624 };
 625
 626 /*
 627  * s3c2410fb_map_video_memory():
 628  *      Allocates the DRAM memory for the frame buffer.  This buffer is
 629  *      remapped into a non-cached, non-buffered, memory region to
 630  *      allow palette and pixel writes to occur without flushing the
 631  *      cache.  Once this area is remapped, all virtual memory
 632  *      access to the video memory should occur at the new region.
 633  */
 634 static int __devinit s3c2410fb_map_video_memory(struct fb_info *info)
 635 {
 636         struct s3c2410fb_info *fbi = info->par;
 637         dma_addr_t map_dma;
 638         unsigned map_size = PAGE_ALIGN(info->fix.smem_len);
 639
 640         dprintk("map_video_memory(fbi=%p) map_size %u\n", fbi, map_size);
 641
 642         info->screen_base = dma_alloc_writecombine(fbi->dev, map_size,
 643                                                    &map_dma, GFP_KERNEL);
 644
 645         if (info->screen_base) {
 646                 /* prevent initial garbage on screen */
 647                 dprintk("map_video_memory: clear %p:%08x\n",
 648                         info->screen_base, map_size);
 649                 memset(info->screen_base, 0x00, map_size);
 650
 651                 info->fix.smem_start = map_dma;
 652
 653                 dprintk("map_video_memory: dma=%08lx cpu=%p size=%08x\n",
 654                         info->fix.smem_start, info->screen_base, map_size);
 655         }
 656
 657         return info->screen_base ? 0 : -ENOMEM;
 658 }
 659
 660 static inline void s3c2410fb_unmap_video_memory(struct fb_info *info)
 661 {
 662         struct s3c2410fb_info *fbi = info->par;
 663
 664         dma_free_writecombine(fbi->dev, PAGE_ALIGN(info->fix.smem_len),
 665                               info->screen_base, info->fix.smem_start);
 666 }
 667
 668 static inline void modify_gpio(void __iomem *reg,
 669                                unsigned long set, unsigned long mask)
 670 {
 671         unsigned long tmp;
 672
 673         tmp = readl(reg) & ~mask;
 674         writel(tmp | set, reg);
 675 }
 676
 677 /*
 678  * s3c2410fb_init_registers - Initialise all LCD-related registers
 679  */
 680 static int s3c2410fb_init_registers(struct fb_info *info)
 681 {
 682         struct s3c2410fb_info *fbi = info->par;
 683         struct s3c2410fb_mach_info *mach_info = fbi->dev->platform_data;
 684         unsigned long flags;
 685         void __iomem *regs = fbi->io;
 686         void __iomem *tpal;
 687         void __iomem *lpcsel;
 688
 689         if (is_s3c2412(fbi)) {
 690                 tpal = regs + S3C2412_TPAL;
 691                 lpcsel = regs + S3C2412_TCONSEL;
 692         } else {
 693                 tpal = regs + S3C2410_TPAL;
 694                 lpcsel = regs + S3C2410_LPCSEL;
 695         }
 696
 697         /* Initialise LCD with values from haret */
 698
 699         local_irq_save(flags);
 700
 701         /* modify the gpio(s) with interrupts set (bjd) */
 702
 703         modify_gpio(S3C2410_GPCUP,  mach_info->gpcup,  mach_info->gpcup_mask);
 704         modify_gpio(S3C2410_GPCCON, mach_info->gpccon, mach_info->gpccon_mask);
 705         modify_gpio(S3C2410_GPDUP,  mach_info->gpdup,  mach_info->gpdup_mask);
 706         modify_gpio(S3C2410_GPDCON, mach_info->gpdcon, mach_info->gpdcon_mask);
 707
 708         local_irq_restore(flags);
 709
 710         dprintk("LPCSEL    = 0x%08lx\n", mach_info->lpcsel);
 711         writel(mach_info->lpcsel, lpcsel);
 712
 713         dprintk("replacing TPAL %08x\n", readl(tpal));
 714
 715         /* ensure temporary palette disabled */
 716         writel(0x00, tpal);
 717
 718         return 0;
 719 }
 720
 721 static void s3c2410fb_write_palette(struct s3c2410fb_info *fbi)
 722 {
 723         unsigned int i;
 724         void __iomem *regs = fbi->io;
 725
 726         fbi->palette_ready = 0;
 727
 728         for (i = 0; i < 256; i++) {
 729                 unsigned long ent = fbi->palette_buffer[i];
 730                 if (ent == PALETTE_BUFF_CLEAR)
 731                         continue;
 732
 733                 writel(ent, regs + S3C2410_TFTPAL(i));
 734
 735                 /* it seems the only way to know exactly
 736                  * if the palette wrote ok, is to check
 737                  * to see if the value verifies ok
 738                  */
 739
 740                 if (readw(regs + S3C2410_TFTPAL(i)) == ent)
 741                         fbi->palette_buffer[i] = PALETTE_BUFF_CLEAR;
 742                 else
 743                         fbi->palette_ready = 1;   /* retry */
 744         }
 745 }
 746
 747 static irqreturn_t s3c2410fb_irq(int irq, void *dev_id)
 748 {
 749         struct s3c2410fb_info *fbi = dev_id;
 750         void __iomem *irq_base = fbi->irq_base;
 751         unsigned long lcdirq = readl(irq_base + S3C24XX_LCDINTPND);
 752
 753         if (lcdirq & S3C2410_LCDINT_FRSYNC) {
 754                 if (fbi->palette_ready)
 755                         s3c2410fb_write_palette(fbi);
 756
 757                 writel(S3C2410_LCDINT_FRSYNC, irq_base + S3C24XX_LCDINTPND);
 758                 writel(S3C2410_LCDINT_FRSYNC, irq_base + S3C24XX_LCDSRCPND);
 759         }
 760
 761         return IRQ_HANDLED;
 762 }
 763
 764 #ifdef CONFIG_CPU_FREQ
 765
 766 static int s3c2410fb_cpufreq_transition(struct notifier_block *nb,
 767                                         unsigned long val, void *data)
 768 {
 769         struct s3c2410fb_info *info;
 770         struct fb_info *fbinfo;
 771         long delta_f;
 772
 773         info = container_of(nb, struct s3c2410fb_info, freq_transition);
 774         fbinfo = platform_get_drvdata(to_platform_device(info->dev));
 775
 776         /* work out change, <0 for speed-up */
 777         delta_f = info->clk_rate - clk_get_rate(info->clk);
 778
 779         if ((val == CPUFREQ_POSTCHANGE && delta_f > 0) ||
 780             (val == CPUFREQ_PRECHANGE && delta_f < 0)) {
 781                 info->clk_rate = clk_get_rate(info->clk);
 782                 s3c2410fb_activate_var(fbinfo);
 783         }
 784
 785         return 0;
 786 }
 787
 788 static inline int s3c2410fb_cpufreq_register(struct s3c2410fb_info *info)
 789 {
 790         info->freq_transition.notifier_call = s3c2410fb_cpufreq_transition;
 791
 792         return cpufreq_register_notifier(&info->freq_transition,
 793                                          CPUFREQ_TRANSITION_NOTIFIER);
 794 }
 795
 796 static inline void s3c2410fb_cpufreq_deregister(struct s3c2410fb_info *info)
 797 {
 798         cpufreq_unregister_notifier(&info->freq_transition,
 799                                     CPUFREQ_TRANSITION_NOTIFIER);
 800 }
 801
 802 #else
 803 static inline int s3c2410fb_cpufreq_register(struct s3c2410fb_info *info)
 804 {
 805         return 0;
 806 }
 807
 808 static inline void s3c2410fb_cpufreq_deregister(struct s3c2410fb_info *info)
 809 {
 810 }
 811 #endif
 812
 813
 814 static const char driver_name[] = "s3c2410fb";
 815
 816 static int __devinit s3c24xxfb_probe(struct platform_device *pdev,
 817                                   enum s3c_drv_type drv_type)
 818 {
 819         struct s3c2410fb_info *info;
 820         struct s3c2410fb_display *display;
 821         struct fb_info *fbinfo;
 822         struct s3c2410fb_mach_info *mach_info;
 823         struct resource *res;
 824         int ret;
 825         int irq;
 826         int i;
 827         int size;
 828         u32 lcdcon1;
 829
 830         mach_info = pdev->dev.platform_data;
 831         if (mach_info == NULL) {
 832                 dev_err(&pdev->dev,
 833                         "no platform data for lcd, cannot attach\n");
 834                 return -EINVAL;
 835         }
 836
 837         if (mach_info->default_display >= mach_info->num_displays) {
 838                 dev_err(&pdev->dev, "default is %d but only %d displays\n",
 839                         mach_info->default_display, mach_info->num_displays);
 840                 return -EINVAL;
 841         }
 842
 843         display = mach_info->displays + mach_info->default_display;
 844
 845         irq = platform_get_irq(pdev, 0);
 846         if (irq < 0) {
 847                 dev_err(&pdev->dev, "no irq for device\n");
 848                 return -ENOENT;
 849         }
 850
 851         fbinfo = framebuffer_alloc(sizeof(struct s3c2410fb_info), &pdev->dev);
 852         if (!fbinfo)
 853                 return -ENOMEM;
 854
 855         platform_set_drvdata(pdev, fbinfo);
 856
 857         info = fbinfo->par;
 858         info->dev = &pdev->dev;
 859         info->drv_type = drv_type;
 860
 861         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 862         if (res == NULL) {
 863                 dev_err(&pdev->dev, "failed to get memory registers\n");
 864                 ret = -ENXIO;
 865                 goto dealloc_fb;
 866         }
 867
 868         size = resource_size(res);
 869         info->mem = request_mem_region(res->start, size, pdev->name);
 870         if (info->mem == NULL) {
 871                 dev_err(&pdev->dev, "failed to get memory region\n");
 872                 ret = -ENOENT;
 873                 goto dealloc_fb;
 874         }
 875
 876         info->io = ioremap(res->start, size);
 877         if (info->io == NULL) {
 878                 dev_err(&pdev->dev, "ioremap() of registers failed\n");
 879                 ret = -ENXIO;
 880                 goto release_mem;
 881         }
 882
 883         if (drv_type == DRV_S3C2412)
 884                 info->irq_base = info->io + S3C2412_LCDINTBASE;
 885         else
 886                 info->irq_base = info->io + S3C2410_LCDINTBASE;
 887
 888         dprintk("devinit\n");
 889
 890         strcpy(fbinfo->fix.id, driver_name);
 891
 892         /* Stop the video */
 893         lcdcon1 = readl(info->io + S3C2410_LCDCON1);
 894         writel(lcdcon1 & ~S3C2410_LCDCON1_ENVID, info->io + S3C2410_LCDCON1);
 895
 896         fbinfo->fix.type            = FB_TYPE_PACKED_PIXELS;
 897         fbinfo->fix.type_aux        = 0;
 898         fbinfo->fix.xpanstep        = 0;
 899         fbinfo->fix.ypanstep        = 0;
 900         fbinfo->fix.ywrapstep       = 0;
 901         fbinfo->fix.accel           = FB_ACCEL_NONE;
 902
 903         fbinfo->var.nonstd          = 0;
 904         fbinfo->var.activate        = FB_ACTIVATE_NOW;
 905         fbinfo->var.accel_flags     = 0;
 906         fbinfo->var.vmode           = FB_VMODE_NONINTERLACED;
 907
 908         fbinfo->fbops               = &s3c2410fb_ops;
 909         fbinfo->flags               = FBINFO_FLAG_DEFAULT;
 910         fbinfo->pseudo_palette      = &info->pseudo_pal;
 911
 912         for (i = 0; i < 256; i++)
 913                 info->palette_buffer[i] = PALETTE_BUFF_CLEAR;
 914
 915         ret = request_irq(irq, s3c2410fb_irq, 0, pdev->name, info);
 916         if (ret) {
 917                 dev_err(&pdev->dev, "cannot get irq %d - err %d\n", irq, ret);
 918                 ret = -EBUSY;
 919                 goto release_regs;
 920         }
 921
 922         info->clk = clk_get(NULL, "lcd");
 923         if (IS_ERR(info->clk)) {
 924                 printk(KERN_ERR "failed to get lcd clock source\n");
 925                 ret = PTR_ERR(info->clk);
 926                 goto release_irq;
 927         }
 928
 929         clk_enable(info->clk);
 930         dprintk("got and enabled clock\n");
 931
 932         usleep_range(1000, 1000);
 933
 934         info->clk_rate = clk_get_rate(info->clk);
 935
 936         /* find maximum required memory size for display */
 937         for (i = 0; i < mach_info->num_displays; i++) {
 938                 unsigned long smem_len = mach_info->displays[i].xres;
 939
 940                 smem_len *= mach_info->displays[i].yres;
 941                 smem_len *= mach_info->displays[i].bpp;
 942                 smem_len >>= 3;
 943                 if (fbinfo->fix.smem_len < smem_len)
 944                         fbinfo->fix.smem_len = smem_len;
 945         }
 946
 947         /* Initialize video memory */
 948         ret = s3c2410fb_map_video_memory(fbinfo);
 949         if (ret) {
 950                 printk(KERN_ERR "Failed to allocate video RAM: %d\n", ret);
 951                 ret = -ENOMEM;
 952                 goto release_clock;
 953         }
 954
 955         dprintk("got video memory\n");
 956
 957         fbinfo->var.xres = display->xres;
 958         fbinfo->var.yres = display->yres;
 959         fbinfo->var.bits_per_pixel = display->bpp;
 960
 961         s3c2410fb_init_registers(fbinfo);
 962
 963         s3c2410fb_check_var(&fbinfo->var, fbinfo);
 964
 965         ret = s3c2410fb_cpufreq_register(info);
 966         if (ret < 0) {
 967                 dev_err(&pdev->dev, "Failed to register cpufreq\n");
 968                 goto free_video_memory;
 969         }
 970
 971         ret = register_framebuffer(fbinfo);
 972         if (ret < 0) {
 973                 printk(KERN_ERR "Failed to register framebuffer device: %d\n",
 974                         ret);
 975                 goto free_cpufreq;
 976         }
 977
 978         /* create device files */
 979         ret = device_create_file(&pdev->dev, &dev_attr_debug);
 980         if (ret)
 981                 printk(KERN_ERR "failed to add debug attribute\n");
 982
 983         printk(KERN_INFO "fb%d: %s frame buffer device\n",
 984                 fbinfo->node, fbinfo->fix.id);
 985
 986         return 0;
 987
 988  free_cpufreq:
 989         s3c2410fb_cpufreq_deregister(info);
 990 free_video_memory:
 991         s3c2410fb_unmap_video_memory(fbinfo);
 992 release_clock:
 993         clk_disable(info->clk);
 994         clk_put(info->clk);
 995 release_irq:
 996         free_irq(irq, info);
 997 release_regs:
 998         iounmap(info->io);
 999 release_mem:
1000         release_mem_region(res->start, size);
1001 dealloc_fb:
1002         platform_set_drvdata(pdev, NULL);
1003         framebuffer_release(fbinfo);
1004         return ret;
1005 }
1006
1007 static int __devinit s3c2410fb_probe(struct platform_device *pdev)
1008 {
1009         return s3c24xxfb_probe(pdev, DRV_S3C2410);
1010 }
1011
1012 static int __devinit s3c2412fb_probe(struct platform_device *pdev)
1013 {
1014         return s3c24xxfb_probe(pdev, DRV_S3C2412);
1015 }
1016
1017
1018 /*
1019  *  Cleanup
1020  */
1021 static int __devexit s3c2410fb_remove(struct platform_device *pdev)
1022 {
1023         struct fb_info *fbinfo = platform_get_drvdata(pdev);
1024         struct s3c2410fb_info *info = fbinfo->par;
1025         int irq;
1026
1027         unregister_framebuffer(fbinfo);
1028         s3c2410fb_cpufreq_deregister(info);
1029
1030         s3c2410fb_lcd_enable(info, 0);
1031         usleep_range(1000, 1000);
1032
1033         s3c2410fb_unmap_video_memory(fbinfo);
1034
1035         if (info->clk) {
1036                 clk_disable(info->clk);
1037                 clk_put(info->clk);
1038                 info->clk = NULL;
1039         }
1040
1041         irq = platform_get_irq(pdev, 0);
1042         free_irq(irq, info);
1043
1044         iounmap(info->io);
1045
1046         release_mem_region(info->mem->start, resource_size(info->mem));
1047
1048         platform_set_drvdata(pdev, NULL);
1049         framebuffer_release(fbinfo);
1050
1051         return 0;
1052 }
1053
1054 #ifdef CONFIG_PM
1055
1056 /* suspend and resume support for the lcd controller */
1057 static int s3c2410fb_suspend(struct platform_device *dev, pm_message_t state)
1058 {
1059         struct fb_info     *fbinfo = platform_get_drvdata(dev);
1060         struct s3c2410fb_info *info = fbinfo->par;
1061
1062         s3c2410fb_lcd_enable(info, 0);
1063
1064         /* sleep before disabling the clock, we need to ensure
1065          * the LCD DMA engine is not going to get back on the bus
1066          * before the clock goes off again (bjd) */
1067
1068         usleep_range(1000, 1000);
1069         clk_disable(info->clk);
1070
1071         return 0;
1072 }
1073
1074 static int s3c2410fb_resume(struct platform_device *dev)
1075 {
1076         struct fb_info     *fbinfo = platform_get_drvdata(dev);
1077         struct s3c2410fb_info *info = fbinfo->par;
1078
1079         clk_enable(info->clk);
1080         usleep_range(1000, 1000);
1081
1082         s3c2410fb_init_registers(fbinfo);
1083
1084         /* re-activate our display after resume */
1085         s3c2410fb_activate_var(fbinfo);
1086         s3c2410fb_blank(FB_BLANK_UNBLANK, fbinfo);
1087
1088         return 0;
1089 }
1090
1091 #else
1092 #define s3c2410fb_suspend NULL
1093 #define s3c2410fb_resume  NULL
1094 #endif
1095
1096 static struct platform_driver s3c2410fb_driver = {
1097         .probe          = s3c2410fb_probe,
1098         .remove         = __devexit_p(s3c2410fb_remove),
1099         .suspend        = s3c2410fb_suspend,
1100         .resume         = s3c2410fb_resume,
1101         .driver         = {
1102                 .name   = "s3c2410-lcd",
1103                 .owner  = THIS_MODULE,
1104         },
1105 };
1106
1107 static struct platform_driver s3c2412fb_driver = {
1108         .probe          = s3c2412fb_probe,
1109         .remove         = __devexit_p(s3c2410fb_remove),
1110         .suspend        = s3c2410fb_suspend,
1111         .resume         = s3c2410fb_resume,
1112         .driver         = {
1113                 .name   = "s3c2412-lcd",
1114                 .owner  = THIS_MODULE,
1115         },
1116 };
1117
1118 int __init s3c2410fb_init(void)
1119 {
1120         int ret = platform_driver_register(&s3c2410fb_driver);
1121
1122         if (ret == 0)
1123                 ret = platform_driver_register(&s3c2412fb_driver);
1124
1125         return ret;
1126 }
1127
1128 static void __exit s3c2410fb_cleanup(void)
1129 {
1130         platform_driver_unregister(&s3c2410fb_driver);
1131         platform_driver_unregister(&s3c2412fb_driver);
1132 }
1133
1134 module_init(s3c2410fb_init);
1135 module_exit(s3c2410fb_cleanup);
1136
1137 MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>, "
1138               "Ben Dooks <ben-linux@fluff.org>");
1139 MODULE_DESCRIPTION("Framebuffer driver for the s3c2410");
1140 MODULE_LICENSE("GPL");
1141 MODULE_ALIAS("platform:s3c2410-lcd");
1142 MODULE_ALIAS("platform:s3c2412-lcd");