drivers/video/amba-clcd.c

   1 /*
   2  *  linux/drivers/video/amba-clcd.c
   3  *
   4  * Copyright (C) 2001 ARM Limited, by David A Rusling
   5  * Updated to 2.5, Deep Blue Solutions Ltd.
   6  *
   7  * This file is subject to the terms and conditions of the GNU General Public
   8  * License.  See the file COPYING in the main directory of this archive
   9  * for more details.
  10  *
  11  *  ARM PrimeCell PL110 Color LCD Controller
  12  */
  13 #include <linux/module.h>
  14 #include <linux/kernel.h>
  15 #include <linux/errno.h>
  16 #include <linux/string.h>
  17 #include <linux/slab.h>
  18 #include <linux/delay.h>
  19 #include <linux/mm.h>
  20 #include <linux/fb.h>
  21 #include <linux/init.h>
  22 #include <linux/ioport.h>
  23 #include <linux/list.h>
  24 #include <linux/amba/bus.h>
  25 #include <linux/amba/clcd.h>
  26 #include <linux/clk.h>
  27
  28 #include <asm/sizes.h>
  29
  30 #define to_clcd(info)   container_of(info, struct clcd_fb, fb)
  31
  32 /* This is limited to 16 characters when displayed by X startup */
  33 static const char *clcd_name = "CLCD FB";
  34
  35 /*
  36  * Unfortunately, the enable/disable functions may be called either from
  37  * process or IRQ context, and we _need_ to delay.  This is _not_ good.
  38  */
  39 static inline void clcdfb_sleep(unsigned int ms)
  40 {
  41         if (in_atomic()) {
  42                 mdelay(ms);
  43         } else {
  44                 msleep(ms);
  45         }
  46 }
  47
  48 static inline void clcdfb_set_start(struct clcd_fb *fb)
  49 {
  50         unsigned long ustart = fb->fb.fix.smem_start;
  51         unsigned long lstart;
  52
  53         ustart += fb->fb.var.yoffset * fb->fb.fix.line_length;
  54         lstart = ustart + fb->fb.var.yres * fb->fb.fix.line_length / 2;
  55
  56         writel(ustart, fb->regs + CLCD_UBAS);
  57         writel(lstart, fb->regs + CLCD_LBAS);
  58 }
  59
  60 static void clcdfb_disable(struct clcd_fb *fb)
  61 {
  62         u32 val;
  63
  64         if (fb->board->disable)
  65                 fb->board->disable(fb);
  66
  67         val = readl(fb->regs + CLCD_CNTL);
  68         if (val & CNTL_LCDPWR) {
  69                 val &= ~CNTL_LCDPWR;
  70                 writel(val, fb->regs + CLCD_CNTL);
  71
  72                 clcdfb_sleep(20);
  73         }
  74         if (val & CNTL_LCDEN) {
  75                 val &= ~CNTL_LCDEN;
  76                 writel(val, fb->regs + CLCD_CNTL);
  77         }
  78
  79         /*
  80          * Disable CLCD clock source.
  81          */
  82         clk_disable(fb->clk);
  83 }
  84
  85 static void clcdfb_enable(struct clcd_fb *fb, u32 cntl)
  86 {
  87         /*
  88          * Enable the CLCD clock source.
  89          */
  90         clk_enable(fb->clk);
  91
  92         /*
  93          * Bring up by first enabling..
  94          */
  95         cntl |= CNTL_LCDEN;
  96         writel(cntl, fb->regs + CLCD_CNTL);
  97
  98         clcdfb_sleep(20);
  99
 100         /*
 101          * and now apply power.
 102          */
 103         cntl |= CNTL_LCDPWR;
 104         writel(cntl, fb->regs + CLCD_CNTL);
 105
 106         /*
 107          * finally, enable the interface.
 108          */
 109         if (fb->board->enable)
 110                 fb->board->enable(fb);
 111 }
 112
 113 static int
 114 clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var)
 115 {
 116         int ret = 0;
 117
 118         memset(&var->transp, 0, sizeof(var->transp));
 119
 120         var->red.msb_right = 0;
 121         var->green.msb_right = 0;
 122         var->blue.msb_right = 0;
 123
 124         switch (var->bits_per_pixel) {
 125         case 1:
 126         case 2:
 127         case 4:
 128         case 8:
 129                 var->red.length         = var->bits_per_pixel;
 130                 var->red.offset         = 0;
 131                 var->green.length       = var->bits_per_pixel;
 132                 var->green.offset       = 0;
 133                 var->blue.length        = var->bits_per_pixel;
 134                 var->blue.offset        = 0;
 135                 break;
 136         case 16:
 137                 var->red.length = 5;
 138                 var->blue.length = 5;
 139                 /*
 140                  * Green length can be 5 or 6 depending whether
 141                  * we're operating in RGB555 or RGB565 mode.
 142                  */
 143                 if (var->green.length != 5 && var->green.length != 6)
 144                         var->green.length = 6;
 145                 break;
 146         case 32:
 147                 if (fb->panel->cntl & CNTL_LCDTFT) {
 148                         var->red.length         = 8;
 149                         var->green.length       = 8;
 150                         var->blue.length        = 8;
 151                         break;
 152                 }
 153         default:
 154                 ret = -EINVAL;
 155                 break;
 156         }
 157
 158         /*
 159          * >= 16bpp displays have separate colour component bitfields
 160          * encoded in the pixel data.  Calculate their position from
 161          * the bitfield length defined above.
 162          */
 163         if (ret == 0 && var->bits_per_pixel >= 16) {
 164                 if (fb->panel->cntl & CNTL_BGR) {
 165                         var->blue.offset = 0;
 166                         var->green.offset = var->blue.offset + var->blue.length;
 167                         var->red.offset = var->green.offset + var->green.length;
 168                 } else {
 169                         var->red.offset = 0;
 170                         var->green.offset = var->red.offset + var->red.length;
 171                         var->blue.offset = var->green.offset + var->green.length;
 172                 }
 173         }
 174
 175         return ret;
 176 }
 177
 178 static int clcdfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 179 {
 180         struct clcd_fb *fb = to_clcd(info);
 181         int ret = -EINVAL;
 182
 183         if (fb->board->check)
 184                 ret = fb->board->check(fb, var);
 185
 186         if (ret == 0 &&
 187             var->xres_virtual * var->bits_per_pixel / 8 *
 188             var->yres_virtual > fb->fb.fix.smem_len)
 189                 ret = -EINVAL;
 190
 191         if (ret == 0)
 192                 ret = clcdfb_set_bitfields(fb, var);
 193
 194         return ret;
 195 }
 196
 197 static int clcdfb_set_par(struct fb_info *info)
 198 {
 199         struct clcd_fb *fb = to_clcd(info);
 200         struct clcd_regs regs;
 201
 202         fb->fb.fix.line_length = fb->fb.var.xres_virtual *
 203                                  fb->fb.var.bits_per_pixel / 8;
 204
 205         if (fb->fb.var.bits_per_pixel <= 8)
 206                 fb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
 207         else
 208                 fb->fb.fix.visual = FB_VISUAL_TRUECOLOR;
 209
 210         fb->board->decode(fb, &regs);
 211
 212         clcdfb_disable(fb);
 213
 214         writel(regs.tim0, fb->regs + CLCD_TIM0);
 215         writel(regs.tim1, fb->regs + CLCD_TIM1);
 216         writel(regs.tim2, fb->regs + CLCD_TIM2);
 217         writel(regs.tim3, fb->regs + CLCD_TIM3);
 218
 219         clcdfb_set_start(fb);
 220
 221         clk_set_rate(fb->clk, (1000000000 / regs.pixclock) * 1000);
 222
 223         fb->clcd_cntl = regs.cntl;
 224
 225         clcdfb_enable(fb, regs.cntl);
 226
 227 #ifdef DEBUG
 228         printk(KERN_INFO "CLCD: Registers set to\n"
 229                KERN_INFO "  %08x %08x %08x %08x\n"
 230                KERN_INFO "  %08x %08x %08x %08x\n",
 231                 readl(fb->regs + CLCD_TIM0), readl(fb->regs + CLCD_TIM1),
 232                 readl(fb->regs + CLCD_TIM2), readl(fb->regs + CLCD_TIM3),
 233                 readl(fb->regs + CLCD_UBAS), readl(fb->regs + CLCD_LBAS),
 234                 readl(fb->regs + CLCD_IENB), readl(fb->regs + CLCD_CNTL));
 235 #endif
 236
 237         return 0;
 238 }
 239
 240 static inline u32 convert_bitfield(int val, struct fb_bitfield *bf)
 241 {
 242         unsigned int mask = (1 << bf->length) - 1;
 243
 244         return (val >> (16 - bf->length) & mask) << bf->offset;
 245 }
 246
 247 /*
 248  *  Set a single color register. The values supplied have a 16 bit
 249  *  magnitude.  Return != 0 for invalid regno.
 250  */
 251 static int
 252 clcdfb_setcolreg(unsigned int regno, unsigned int red, unsigned int green,
 253                  unsigned int blue, unsigned int transp, struct fb_info *info)
 254 {
 255         struct clcd_fb *fb = to_clcd(info);
 256
 257         if (regno < 16)
 258                 fb->cmap[regno] = convert_bitfield(transp, &fb->fb.var.transp) |
 259                                   convert_bitfield(blue, &fb->fb.var.blue) |
 260                                   convert_bitfield(green, &fb->fb.var.green) |
 261                                   convert_bitfield(red, &fb->fb.var.red);
 262
 263         if (fb->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR && regno < 256) {
 264                 int hw_reg = CLCD_PALETTE + ((regno * 2) & ~3);
 265                 u32 val, mask, newval;
 266
 267                 newval  = (red >> 11)  & 0x001f;
 268                 newval |= (green >> 6) & 0x03e0;
 269                 newval |= (blue >> 1)  & 0x7c00;
 270
 271                 /*
 272                  * 3.2.11: if we're configured for big endian
 273                  * byte order, the palette entries are swapped.
 274                  */
 275                 if (fb->clcd_cntl & CNTL_BEBO)
 276                         regno ^= 1;
 277
 278                 if (regno & 1) {
 279                         newval <<= 16;
 280                         mask = 0x0000ffff;
 281                 } else {
 282                         mask = 0xffff0000;
 283                 }
 284
 285                 val = readl(fb->regs + hw_reg) & mask;
 286                 writel(val | newval, fb->regs + hw_reg);
 287         }
 288
 289         return regno > 255;
 290 }
 291
 292 /*
 293  *  Blank the screen if blank_mode != 0, else unblank. If blank == NULL
 294  *  then the caller blanks by setting the CLUT (Color Look Up Table) to all
 295  *  black. Return 0 if blanking succeeded, != 0 if un-/blanking failed due
 296  *  to e.g. a video mode which doesn't support it. Implements VESA suspend
 297  *  and powerdown modes on hardware that supports disabling hsync/vsync:
 298  *    blank_mode == 2: suspend vsync
 299  *    blank_mode == 3: suspend hsync
 300  *    blank_mode == 4: powerdown
 301  */
 302 static int clcdfb_blank(int blank_mode, struct fb_info *info)
 303 {
 304         struct clcd_fb *fb = to_clcd(info);
 305
 306         if (blank_mode != 0) {
 307                 clcdfb_disable(fb);
 308         } else {
 309                 clcdfb_enable(fb, fb->clcd_cntl);
 310         }
 311         return 0;
 312 }
 313
 314 static int clcdfb_mmap(struct fb_info *info,
 315                        struct vm_area_struct *vma)
 316 {
 317         struct clcd_fb *fb = to_clcd(info);
 318         unsigned long len, off = vma->vm_pgoff << PAGE_SHIFT;
 319         int ret = -EINVAL;
 320
 321         len = info->fix.smem_len;
 322
 323         if (off <= len && vma->vm_end - vma->vm_start <= len - off &&
 324             fb->board->mmap)
 325                 ret = fb->board->mmap(fb, vma);
 326
 327         return ret;
 328 }
 329
 330 static struct fb_ops clcdfb_ops = {
 331         .owner          = THIS_MODULE,
 332         .fb_check_var   = clcdfb_check_var,
 333         .fb_set_par     = clcdfb_set_par,
 334         .fb_setcolreg   = clcdfb_setcolreg,
 335         .fb_blank       = clcdfb_blank,
 336         .fb_fillrect    = cfb_fillrect,
 337         .fb_copyarea    = cfb_copyarea,
 338         .fb_imageblit   = cfb_imageblit,
 339         .fb_mmap        = clcdfb_mmap,
 340 };
 341
 342 static int clcdfb_register(struct clcd_fb *fb)
 343 {
 344         int ret;
 345
 346         fb->clk = clk_get(&fb->dev->dev, "CLCDCLK");
 347         if (IS_ERR(fb->clk)) {
 348                 ret = PTR_ERR(fb->clk);
 349                 goto out;
 350         }
 351
 352         fb->fb.fix.mmio_start   = fb->dev->res.start;
 353         fb->fb.fix.mmio_len     = SZ_4K;
 354
 355         fb->regs = ioremap(fb->fb.fix.mmio_start, fb->fb.fix.mmio_len);
 356         if (!fb->regs) {
 357                 printk(KERN_ERR "CLCD: unable to remap registers\n");
 358                 ret = -ENOMEM;
 359                 goto free_clk;
 360         }
 361
 362         fb->fb.fbops            = &clcdfb_ops;
 363         fb->fb.flags            = FBINFO_FLAG_DEFAULT;
 364         fb->fb.pseudo_palette   = fb->cmap;
 365
 366         strncpy(fb->fb.fix.id, clcd_name, sizeof(fb->fb.fix.id));
 367         fb->fb.fix.type         = FB_TYPE_PACKED_PIXELS;
 368         fb->fb.fix.type_aux     = 0;
 369         fb->fb.fix.xpanstep     = 0;
 370         fb->fb.fix.ypanstep     = 0;
 371         fb->fb.fix.ywrapstep    = 0;
 372         fb->fb.fix.accel        = FB_ACCEL_NONE;
 373
 374         fb->fb.var.xres         = fb->panel->mode.xres;
 375         fb->fb.var.yres         = fb->panel->mode.yres;
 376         fb->fb.var.xres_virtual = fb->panel->mode.xres;
 377         fb->fb.var.yres_virtual = fb->panel->mode.yres;
 378         fb->fb.var.bits_per_pixel = fb->panel->bpp;
 379         fb->fb.var.grayscale    = fb->panel->grayscale;
 380         fb->fb.var.pixclock     = fb->panel->mode.pixclock;
 381         fb->fb.var.left_margin  = fb->panel->mode.left_margin;
 382         fb->fb.var.right_margin = fb->panel->mode.right_margin;
 383         fb->fb.var.upper_margin = fb->panel->mode.upper_margin;
 384         fb->fb.var.lower_margin = fb->panel->mode.lower_margin;
 385         fb->fb.var.hsync_len    = fb->panel->mode.hsync_len;
 386         fb->fb.var.vsync_len    = fb->panel->mode.vsync_len;
 387         fb->fb.var.sync         = fb->panel->mode.sync;
 388         fb->fb.var.vmode        = fb->panel->mode.vmode;
 389         fb->fb.var.activate     = FB_ACTIVATE_NOW;
 390         fb->fb.var.nonstd       = 0;
 391         fb->fb.var.height       = fb->panel->height;
 392         fb->fb.var.width        = fb->panel->width;
 393         fb->fb.var.accel_flags  = 0;
 394
 395         fb->fb.monspecs.hfmin   = 0;
 396         fb->fb.monspecs.hfmax   = 100000;
 397         fb->fb.monspecs.vfmin   = 0;
 398         fb->fb.monspecs.vfmax   = 400;
 399         fb->fb.monspecs.dclkmin = 1000000;
 400         fb->fb.monspecs.dclkmax = 100000000;
 401
 402         /*
 403          * Make sure that the bitfields are set appropriately.
 404          */
 405         clcdfb_set_bitfields(fb, &fb->fb.var);
 406
 407         /*
 408          * Allocate colourmap.
 409          */
 410         fb_alloc_cmap(&fb->fb.cmap, 256, 0);
 411
 412         /*
 413          * Ensure interrupts are disabled.
 414          */
 415         writel(0, fb->regs + CLCD_IENB);
 416
 417         fb_set_var(&fb->fb, &fb->fb.var);
 418
 419         printk(KERN_INFO "CLCD: %s hardware, %s display\n",
 420                fb->board->name, fb->panel->mode.name);
 421
 422         ret = register_framebuffer(&fb->fb);
 423         if (ret == 0)
 424                 goto out;
 425
 426         printk(KERN_ERR "CLCD: cannot register framebuffer (%d)\n", ret);
 427
 428         iounmap(fb->regs);
 429  free_clk:
 430         clk_put(fb->clk);
 431  out:
 432         return ret;
 433 }
 434
 435 static int clcdfb_probe(struct amba_device *dev, void *id)
 436 {
 437         struct clcd_board *board = dev->dev.platform_data;
 438         struct clcd_fb *fb;
 439         int ret;
 440
 441         if (!board)
 442                 return -EINVAL;
 443
 444         ret = amba_request_regions(dev, NULL);
 445         if (ret) {
 446                 printk(KERN_ERR "CLCD: unable to reserve regs region\n");
 447                 goto out;
 448         }
 449
 450         fb = (struct clcd_fb *) kmalloc(sizeof(struct clcd_fb), GFP_KERNEL);
 451         if (!fb) {
 452                 printk(KERN_INFO "CLCD: could not allocate new clcd_fb struct\n");
 453                 ret = -ENOMEM;
 454                 goto free_region;
 455         }
 456         memset(fb, 0, sizeof(struct clcd_fb));
 457
 458         fb->dev = dev;
 459         fb->board = board;
 460
 461         ret = fb->board->setup(fb);
 462         if (ret)
 463                 goto free_fb;
 464
 465         ret = clcdfb_register(fb);
 466         if (ret == 0) {
 467                 amba_set_drvdata(dev, fb);
 468                 goto out;
 469         }
 470
 471         fb->board->remove(fb);
 472  free_fb:
 473         kfree(fb);
 474  free_region:
 475         amba_release_regions(dev);
 476  out:
 477         return ret;
 478 }
 479
 480 static int clcdfb_remove(struct amba_device *dev)
 481 {
 482         struct clcd_fb *fb = amba_get_drvdata(dev);
 483
 484         amba_set_drvdata(dev, NULL);
 485
 486         clcdfb_disable(fb);
 487         unregister_framebuffer(&fb->fb);
 488         iounmap(fb->regs);
 489         clk_put(fb->clk);
 490
 491         fb->board->remove(fb);
 492
 493         kfree(fb);
 494
 495         amba_release_regions(dev);
 496
 497         return 0;
 498 }
 499
 500 static struct amba_id clcdfb_id_table[] = {
 501         {
 502                 .id     = 0x00041110,
 503                 .mask   = 0x000ffffe,
 504         },
 505         { 0, 0 },
 506 };
 507
 508 static struct amba_driver clcd_driver = {
 509         .drv            = {
 510                 .name   = "clcd-pl11x",
 511         },
 512         .probe          = clcdfb_probe,
 513         .remove         = clcdfb_remove,
 514         .id_table       = clcdfb_id_table,
 515 };
 516
 517 static int __init amba_clcdfb_init(void)
 518 {
 519         if (fb_get_options("ambafb", NULL))
 520                 return -ENODEV;
 521
 522         return amba_driver_register(&clcd_driver);
 523 }
 524
 525 module_init(amba_clcdfb_init);
 526
 527 static void __exit amba_clcdfb_exit(void)
 528 {
 529         amba_driver_unregister(&clcd_driver);
 530 }
 531
 532 module_exit(amba_clcdfb_exit);
 533
 534 MODULE_DESCRIPTION("ARM PrimeCell PL110 CLCD core driver");
 535 MODULE_LICENSE("GPL");