drivers/usb/serial/io_ti.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Edgeport USB Serial Converter driver
   4  *
   5  * Copyright (C) 2000-2002 Inside Out Networks, All rights reserved.
   6  * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com>
   7  *
   8  * Supports the following devices:
   9  *      EP/1 EP/2 EP/4 EP/21 EP/22 EP/221 EP/42 EP/421 WATCHPORT
  10  *
  11  * For questions or problems with this driver, contact Inside Out
  12  * Networks technical support, or Peter Berger <pberger@brimson.com>,
  13  * or Al Borchers <alborchers@steinerpoint.com>.
  14  */
  15
  16 #include <linux/kernel.h>
  17 #include <linux/jiffies.h>
  18 #include <linux/errno.h>
  19 #include <linux/slab.h>
  20 #include <linux/tty.h>
  21 #include <linux/tty_driver.h>
  22 #include <linux/tty_flip.h>
  23 #include <linux/module.h>
  24 #include <linux/spinlock.h>
  25 #include <linux/mutex.h>
  26 #include <linux/serial.h>
  27 #include <linux/swab.h>
  28 #include <linux/kfifo.h>
  29 #include <linux/ioctl.h>
  30 #include <linux/firmware.h>
  31 #include <linux/uaccess.h>
  32 #include <linux/usb.h>
  33 #include <linux/usb/serial.h>
  34
  35 #include "io_16654.h"
  36 #include "io_usbvend.h"
  37 #include "io_ti.h"
  38
  39 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com> and David Iacovelli"
  40 #define DRIVER_DESC "Edgeport USB Serial Driver"
  41
  42 #define EPROM_PAGE_SIZE         64
  43
  44
  45 /* different hardware types */
  46 #define HARDWARE_TYPE_930       0
  47 #define HARDWARE_TYPE_TIUMP     1
  48
  49 /* IOCTL_PRIVATE_TI_GET_MODE Definitions */
  50 #define TI_MODE_CONFIGURING     0   /* Device has not entered start device */
  51 #define TI_MODE_BOOT            1   /* Staying in boot mode                */
  52 #define TI_MODE_DOWNLOAD        2   /* Made it to download mode            */
  53 #define TI_MODE_TRANSITIONING   3   /*
  54                                      * Currently in boot mode but
  55                                      * transitioning to download mode
  56                                      */
  57
  58 /* read urb state */
  59 #define EDGE_READ_URB_RUNNING   0
  60 #define EDGE_READ_URB_STOPPING  1
  61 #define EDGE_READ_URB_STOPPED   2
  62
  63
  64 /* Product information read from the Edgeport */
  65 struct product_info {
  66         int     TiMode;                 /* Current TI Mode  */
  67         u8      hardware_type;          /* Type of hardware */
  68 } __packed;
  69
  70 /*
  71  * Edgeport firmware header
  72  *
  73  * "build_number" has been set to 0 in all three of the images I have
  74  * seen, and Digi Tech Support suggests that it is safe to ignore it.
  75  *
  76  * "length" is the number of bytes of actual data following the header.
  77  *
  78  * "checksum" is the low order byte resulting from adding the values of
  79  * all the data bytes.
  80  */
  81 struct edgeport_fw_hdr {
  82         u8 major_version;
  83         u8 minor_version;
  84         __le16 build_number;
  85         __le16 length;
  86         u8 checksum;
  87 } __packed;
  88
  89 struct edgeport_port {
  90         u16 uart_base;
  91         u16 dma_address;
  92         u8 shadow_msr;
  93         u8 shadow_mcr;
  94         u8 shadow_lsr;
  95         u8 lsr_mask;
  96         u32 ump_read_timeout;           /*
  97                                          * Number of milliseconds the UMP will
  98                                          * wait without data before completing
  99                                          * a read short
 100                                          */
 101         int baud_rate;
 102         int close_pending;
 103         int lsr_event;
 104
 105         struct edgeport_serial  *edge_serial;
 106         struct usb_serial_port  *port;
 107         u8 bUartMode;           /* Port type, 0: RS232, etc. */
 108         spinlock_t ep_lock;
 109         int ep_read_urb_state;
 110         int ep_write_urb_in_use;
 111 };
 112
 113 struct edgeport_serial {
 114         struct product_info product_info;
 115         u8 TI_I2C_Type;                 /* Type of I2C in UMP */
 116         u8 TiReadI2C;                   /*
 117                                          * Set to TRUE if we have read the
 118                                          * I2c in Boot Mode
 119                                          */
 120         struct mutex es_lock;
 121         int num_ports_open;
 122         struct usb_serial *serial;
 123         struct delayed_work heartbeat_work;
 124         int fw_version;
 125         bool use_heartbeat;
 126 };
 127
 128
 129 /* Devices that this driver supports */
 130 static const struct usb_device_id edgeport_1port_id_table[] = {
 131         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_1) },
 132         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1) },
 133         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1I) },
 134         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_PROXIMITY) },
 135         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_MOTION) },
 136         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_MOISTURE) },
 137         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_TEMPERATURE) },
 138         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_HUMIDITY) },
 139         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_POWER) },
 140         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_LIGHT) },
 141         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_RADIATION) },
 142         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_DISTANCE) },
 143         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_ACCELERATION) },
 144         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_PROX_DIST) },
 145         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_PLUS_PWR_HP4CD) },
 146         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_PLUS_PWR_PCI) },
 147         { }
 148 };
 149
 150 static const struct usb_device_id edgeport_2port_id_table[] = {
 151         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2) },
 152         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2C) },
 153         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2I) },
 154         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_421) },
 155         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_21) },
 156         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_42) },
 157         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4) },
 158         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4I) },
 159         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_22I) },
 160         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_221C) },
 161         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_22C) },
 162         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_21C) },
 163         /* The 4, 8 and 16 port devices show up as multiple 2 port devices */
 164         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4S) },
 165         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_8) },
 166         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_8S) },
 167         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416) },
 168         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416B) },
 169         { }
 170 };
 171
 172 /* Devices that this driver supports */
 173 static const struct usb_device_id id_table_combined[] = {
 174         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_1) },
 175         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1) },
 176         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1I) },
 177         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_PROXIMITY) },
 178         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_MOTION) },
 179         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_MOISTURE) },
 180         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_TEMPERATURE) },
 181         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_HUMIDITY) },
 182         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_POWER) },
 183         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_LIGHT) },
 184         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_RADIATION) },
 185         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_DISTANCE) },
 186         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_ACCELERATION) },
 187         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_PROX_DIST) },
 188         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_PLUS_PWR_HP4CD) },
 189         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_PLUS_PWR_PCI) },
 190         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2) },
 191         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2C) },
 192         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2I) },
 193         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_421) },
 194         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_21) },
 195         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_42) },
 196         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4) },
 197         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4I) },
 198         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_22I) },
 199         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_221C) },
 200         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_22C) },
 201         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_21C) },
 202         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4S) },
 203         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_8) },
 204         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_8S) },
 205         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416) },
 206         { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416B) },
 207         { }
 208 };
 209
 210 MODULE_DEVICE_TABLE(usb, id_table_combined);
 211
 212 static bool ignore_cpu_rev;
 213 static int default_uart_mode;           /* RS232 */
 214
 215 static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data,
 216                 int length);
 217
 218 static void stop_read(struct edgeport_port *edge_port);
 219 static int restart_read(struct edgeport_port *edge_port);
 220
 221 static void edge_set_termios(struct tty_struct *tty,
 222                 struct usb_serial_port *port, struct ktermios *old_termios);
 223 static void edge_send(struct usb_serial_port *port, struct tty_struct *tty);
 224
 225 static int do_download_mode(struct edgeport_serial *serial,
 226                 const struct firmware *fw);
 227 static int do_boot_mode(struct edgeport_serial *serial,
 228                 const struct firmware *fw);
 229
 230 /* sysfs attributes */
 231 static int edge_create_sysfs_attrs(struct usb_serial_port *port);
 232 static int edge_remove_sysfs_attrs(struct usb_serial_port *port);
 233
 234 /*
 235  * Some release of Edgeport firmware "down3.bin" after version 4.80
 236  * introduced code to automatically disconnect idle devices on some
 237  * Edgeport models after periods of inactivity, typically ~60 seconds.
 238  * This occurs without regard to whether ports on the device are open
 239  * or not.  Digi International Tech Support suggested:
 240  *
 241  * 1.  Adding driver "heartbeat" code to reset the firmware timer by
 242  *     requesting a descriptor record every 15 seconds, which should be
 243  *     effective with newer firmware versions that require it, and benign
 244  *     with older versions that do not. In practice 40 seconds seems often
 245  *     enough.
 246  * 2.  The heartbeat code is currently required only on Edgeport/416 models.
 247  */
 248 #define FW_HEARTBEAT_VERSION_CUTOFF ((4 << 8) + 80)
 249 #define FW_HEARTBEAT_SECS 40
 250
 251 /* Timeouts in msecs: firmware downloads take longer */
 252 #define TI_VSEND_TIMEOUT_DEFAULT 1000
 253 #define TI_VSEND_TIMEOUT_FW_DOWNLOAD 10000
 254
 255 static int ti_vread_sync(struct usb_device *dev, u8 request, u16 value,
 256                 u16 index, void *data, int size)
 257 {
 258         int status;
 259
 260         status = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request,
 261                         (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN),
 262                         value, index, data, size, 1000);
 263         if (status < 0)
 264                 return status;
 265         if (status != size) {
 266                 dev_dbg(&dev->dev, "%s - wanted to read %d, but only read %d\n",
 267                         __func__, size, status);
 268                 return -ECOMM;
 269         }
 270         return 0;
 271 }
 272
 273 static int ti_vsend_sync(struct usb_device *dev, u8 request, u16 value,
 274                 u16 index, void *data, int size, int timeout)
 275 {
 276         int status;
 277
 278         status = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request,
 279                         (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT),
 280                         value, index, data, size, timeout);
 281         if (status < 0)
 282                 return status;
 283
 284         return 0;
 285 }
 286
 287 static int read_port_cmd(struct usb_serial_port *port, u8 command, u16 value,
 288                 void *data, int size)
 289 {
 290         return ti_vread_sync(port->serial->dev, command, value,
 291                         UMPM_UART1_PORT + port->port_number,
 292                         data, size);
 293 }
 294
 295 static int send_port_cmd(struct usb_serial_port *port, u8 command, u16 value,
 296                 void *data, int size)
 297 {
 298         return ti_vsend_sync(port->serial->dev, command, value,
 299                         UMPM_UART1_PORT + port->port_number,
 300                         data, size, TI_VSEND_TIMEOUT_DEFAULT);
 301 }
 302
 303 /* clear tx/rx buffers and fifo in TI UMP */
 304 static int purge_port(struct usb_serial_port *port, u16 mask)
 305 {
 306         int port_number = port->port_number;
 307
 308         dev_dbg(&port->dev, "%s - port %d, mask %x\n", __func__, port_number, mask);
 309
 310         return send_port_cmd(port, UMPC_PURGE_PORT, mask, NULL, 0);
 311 }
 312
 313 /**
 314  * read_download_mem - Read edgeport memory from TI chip
 315  * @dev: usb device pointer
 316  * @start_address: Device CPU address at which to read
 317  * @length: Length of above data
 318  * @address_type: Can read both XDATA and I2C
 319  * @buffer: pointer to input data buffer
 320  */
 321 static int read_download_mem(struct usb_device *dev, int start_address,
 322                                 int length, u8 address_type, u8 *buffer)
 323 {
 324         int status = 0;
 325         u8 read_length;
 326         u16 be_start_address;
 327
 328         dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, length);
 329
 330         /*
 331          * Read in blocks of 64 bytes
 332          * (TI firmware can't handle more than 64 byte reads)
 333          */
 334         while (length) {
 335                 if (length > 64)
 336                         read_length = 64;
 337                 else
 338                         read_length = (u8)length;
 339
 340                 if (read_length > 1) {
 341                         dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, read_length);
 342                 }
 343                 /*
 344                  * NOTE: Must use swab as wIndex is sent in little-endian
 345                  *       byte order regardless of host byte order.
 346                  */
 347                 be_start_address = swab16((u16)start_address);
 348                 status = ti_vread_sync(dev, UMPC_MEMORY_READ,
 349                                         (u16)address_type,
 350                                         be_start_address,
 351                                         buffer, read_length);
 352
 353                 if (status) {
 354                         dev_dbg(&dev->dev, "%s - ERROR %x\n", __func__, status);
 355                         return status;
 356                 }
 357
 358                 if (read_length > 1)
 359                         usb_serial_debug_data(&dev->dev, __func__, read_length, buffer);
 360
 361                 /* Update pointers/length */
 362                 start_address += read_length;
 363                 buffer += read_length;
 364                 length -= read_length;
 365         }
 366
 367         return status;
 368 }
 369
 370 static int read_ram(struct usb_device *dev, int start_address,
 371                                                 int length, u8 *buffer)
 372 {
 373         return read_download_mem(dev, start_address, length,
 374                                         DTK_ADDR_SPACE_XDATA, buffer);
 375 }
 376
 377 /* Read edgeport memory to a given block */
 378 static int read_boot_mem(struct edgeport_serial *serial,
 379                                 int start_address, int length, u8 *buffer)
 380 {
 381         int status = 0;
 382         int i;
 383
 384         for (i = 0; i < length; i++) {
 385                 status = ti_vread_sync(serial->serial->dev,
 386                                 UMPC_MEMORY_READ, serial->TI_I2C_Type,
 387                                 (u16)(start_address+i), &buffer[i], 0x01);
 388                 if (status) {
 389                         dev_dbg(&serial->serial->dev->dev, "%s - ERROR %x\n", __func__, status);
 390                         return status;
 391                 }
 392         }
 393
 394         dev_dbg(&serial->serial->dev->dev, "%s - start_address = %x, length = %d\n",
 395                 __func__, start_address, length);
 396         usb_serial_debug_data(&serial->serial->dev->dev, __func__, length, buffer);
 397
 398         serial->TiReadI2C = 1;
 399
 400         return status;
 401 }
 402
 403 /* Write given block to TI EPROM memory */
 404 static int write_boot_mem(struct edgeport_serial *serial,
 405                                 int start_address, int length, u8 *buffer)
 406 {
 407         int status = 0;
 408         int i;
 409         u8 *temp;
 410
 411         /* Must do a read before write */
 412         if (!serial->TiReadI2C) {
 413                 temp = kmalloc(1, GFP_KERNEL);
 414                 if (!temp)
 415                         return -ENOMEM;
 416
 417                 status = read_boot_mem(serial, 0, 1, temp);
 418                 kfree(temp);
 419                 if (status)
 420                         return status;
 421         }
 422
 423         for (i = 0; i < length; ++i) {
 424                 status = ti_vsend_sync(serial->serial->dev, UMPC_MEMORY_WRITE,
 425                                 buffer[i], (u16)(i + start_address), NULL,
 426                                 0, TI_VSEND_TIMEOUT_DEFAULT);
 427                 if (status)
 428                         return status;
 429         }
 430
 431         dev_dbg(&serial->serial->dev->dev, "%s - start_sddr = %x, length = %d\n", __func__, start_address, length);
 432         usb_serial_debug_data(&serial->serial->dev->dev, __func__, length, buffer);
 433
 434         return status;
 435 }
 436
 437 /* Write edgeport I2C memory to TI chip */
 438 static int write_i2c_mem(struct edgeport_serial *serial,
 439                 int start_address, int length, u8 address_type, u8 *buffer)
 440 {
 441         struct device *dev = &serial->serial->dev->dev;
 442         int status = 0;
 443         int write_length;
 444         u16 be_start_address;
 445
 446         /* We can only send a maximum of 1 aligned byte page at a time */
 447
 448         /* calculate the number of bytes left in the first page */
 449         write_length = EPROM_PAGE_SIZE -
 450                                 (start_address & (EPROM_PAGE_SIZE - 1));
 451
 452         if (write_length > length)
 453                 write_length = length;
 454
 455         dev_dbg(dev, "%s - BytesInFirstPage Addr = %x, length = %d\n",
 456                 __func__, start_address, write_length);
 457         usb_serial_debug_data(dev, __func__, write_length, buffer);
 458
 459         /*
 460          * Write first page.
 461          *
 462          * NOTE: Must use swab as wIndex is sent in little-endian byte order
 463          *       regardless of host byte order.
 464          */
 465         be_start_address = swab16((u16)start_address);
 466         status = ti_vsend_sync(serial->serial->dev, UMPC_MEMORY_WRITE,
 467                                 (u16)address_type, be_start_address,
 468                                 buffer, write_length, TI_VSEND_TIMEOUT_DEFAULT);
 469         if (status) {
 470                 dev_dbg(dev, "%s - ERROR %d\n", __func__, status);
 471                 return status;
 472         }
 473
 474         length          -= write_length;
 475         start_address   += write_length;
 476         buffer          += write_length;
 477
 478         /*
 479          * We should be aligned now -- can write max page size bytes at a
 480          * time.
 481          */
 482         while (length) {
 483                 if (length > EPROM_PAGE_SIZE)
 484                         write_length = EPROM_PAGE_SIZE;
 485                 else
 486                         write_length = length;
 487
 488                 dev_dbg(dev, "%s - Page Write Addr = %x, length = %d\n",
 489                         __func__, start_address, write_length);
 490                 usb_serial_debug_data(dev, __func__, write_length, buffer);
 491
 492                 /*
 493                  * Write next page.
 494                  *
 495                  * NOTE: Must use swab as wIndex is sent in little-endian byte
 496                  *       order regardless of host byte order.
 497                  */
 498                 be_start_address = swab16((u16)start_address);
 499                 status = ti_vsend_sync(serial->serial->dev, UMPC_MEMORY_WRITE,
 500                                 (u16)address_type, be_start_address, buffer,
 501                                 write_length, TI_VSEND_TIMEOUT_DEFAULT);
 502                 if (status) {
 503                         dev_err(dev, "%s - ERROR %d\n", __func__, status);
 504                         return status;
 505                 }
 506
 507                 length          -= write_length;
 508                 start_address   += write_length;
 509                 buffer          += write_length;
 510         }
 511         return status;
 512 }
 513
 514 /*
 515  * Examine the UMP DMA registers and LSR
 516  *
 517  * Check the MSBit of the X and Y DMA byte count registers.
 518  * A zero in this bit indicates that the TX DMA buffers are empty
 519  * then check the TX Empty bit in the UART.
 520  */
 521 static int tx_active(struct edgeport_port *port)
 522 {
 523         int status;
 524         struct out_endpoint_desc_block *oedb;
 525         u8 *lsr;
 526         int bytes_left = 0;
 527
 528         oedb = kmalloc(sizeof(*oedb), GFP_KERNEL);
 529         if (!oedb)
 530                 return -ENOMEM;
 531
 532         /*
 533          * Sigh, that's right, just one byte, as not all platforms can
 534          * do DMA from stack
 535          */
 536         lsr = kmalloc(1, GFP_KERNEL);
 537         if (!lsr) {
 538                 kfree(oedb);
 539                 return -ENOMEM;
 540         }
 541         /* Read the DMA Count Registers */
 542         status = read_ram(port->port->serial->dev, port->dma_address,
 543                                                 sizeof(*oedb), (void *)oedb);
 544         if (status)
 545                 goto exit_is_tx_active;
 546
 547         dev_dbg(&port->port->dev, "%s - XByteCount    0x%X\n", __func__, oedb->XByteCount);
 548
 549         /* and the LSR */
 550         status = read_ram(port->port->serial->dev,
 551                         port->uart_base + UMPMEM_OFFS_UART_LSR, 1, lsr);
 552
 553         if (status)
 554                 goto exit_is_tx_active;
 555         dev_dbg(&port->port->dev, "%s - LSR = 0x%X\n", __func__, *lsr);
 556
 557         /* If either buffer has data or we are transmitting then return TRUE */
 558         if ((oedb->XByteCount & 0x80) != 0)
 559                 bytes_left += 64;
 560
 561         if ((*lsr & UMP_UART_LSR_TX_MASK) == 0)
 562                 bytes_left += 1;
 563
 564         /* We return Not Active if we get any kind of error */
 565 exit_is_tx_active:
 566         dev_dbg(&port->port->dev, "%s - return %d\n", __func__, bytes_left);
 567
 568         kfree(lsr);
 569         kfree(oedb);
 570         return bytes_left;
 571 }
 572
 573 static int choose_config(struct usb_device *dev)
 574 {
 575         /*
 576          * There may be multiple configurations on this device, in which case
 577          * we would need to read and parse all of them to find out which one
 578          * we want. However, we just support one config at this point,
 579          * configuration # 1, which is Config Descriptor 0.
 580          */
 581
 582         dev_dbg(&dev->dev, "%s - Number of Interfaces = %d\n",
 583                 __func__, dev->config->desc.bNumInterfaces);
 584         dev_dbg(&dev->dev, "%s - MAX Power            = %d\n",
 585                 __func__, dev->config->desc.bMaxPower * 2);
 586
 587         if (dev->config->desc.bNumInterfaces != 1) {
 588                 dev_err(&dev->dev, "%s - bNumInterfaces is not 1, ERROR!\n", __func__);
 589                 return -ENODEV;
 590         }
 591
 592         return 0;
 593 }
 594
 595 static int read_rom(struct edgeport_serial *serial,
 596                                 int start_address, int length, u8 *buffer)
 597 {
 598         int status;
 599
 600         if (serial->product_info.TiMode == TI_MODE_DOWNLOAD) {
 601                 status = read_download_mem(serial->serial->dev,
 602                                                start_address,
 603                                                length,
 604                                                serial->TI_I2C_Type,
 605                                                buffer);
 606         } else {
 607                 status = read_boot_mem(serial, start_address, length,
 608                                                                 buffer);
 609         }
 610         return status;
 611 }
 612
 613 static int write_rom(struct edgeport_serial *serial, int start_address,
 614                                                 int length, u8 *buffer)
 615 {
 616         if (serial->product_info.TiMode == TI_MODE_BOOT)
 617                 return write_boot_mem(serial, start_address, length,
 618                                                                 buffer);
 619
 620         if (serial->product_info.TiMode == TI_MODE_DOWNLOAD)
 621                 return write_i2c_mem(serial, start_address, length,
 622                                                 serial->TI_I2C_Type, buffer);
 623         return -EINVAL;
 624 }
 625
 626 /* Read a descriptor header from I2C based on type */
 627 static int get_descriptor_addr(struct edgeport_serial *serial,
 628                                 int desc_type, struct ti_i2c_desc *rom_desc)
 629 {
 630         int start_address;
 631         int status;
 632
 633         /* Search for requested descriptor in I2C */
 634         start_address = 2;
 635         do {
 636                 status = read_rom(serial,
 637                                    start_address,
 638                                    sizeof(struct ti_i2c_desc),
 639                                    (u8 *)rom_desc);
 640                 if (status)
 641                         return 0;
 642
 643                 if (rom_desc->Type == desc_type)
 644                         return start_address;
 645
 646                 start_address = start_address + sizeof(struct ti_i2c_desc) +
 647                                                 le16_to_cpu(rom_desc->Size);
 648
 649         } while ((start_address < TI_MAX_I2C_SIZE) && rom_desc->Type);
 650
 651         return 0;
 652 }
 653
 654 /* Validate descriptor checksum */
 655 static int valid_csum(struct ti_i2c_desc *rom_desc, u8 *buffer)
 656 {
 657         u16 i;
 658         u8 cs = 0;
 659
 660         for (i = 0; i < le16_to_cpu(rom_desc->Size); i++)
 661                 cs = (u8)(cs + buffer[i]);
 662
 663         if (cs != rom_desc->CheckSum) {
 664                 pr_debug("%s - Mismatch %x - %x", __func__, rom_desc->CheckSum, cs);
 665                 return -EINVAL;
 666         }
 667         return 0;
 668 }
 669
 670 /* Make sure that the I2C image is good */
 671 static int check_i2c_image(struct edgeport_serial *serial)
 672 {
 673         struct device *dev = &serial->serial->dev->dev;
 674         int status = 0;
 675         struct ti_i2c_desc *rom_desc;
 676         int start_address = 2;
 677         u8 *buffer;
 678         u16 ttype;
 679
 680         rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
 681         if (!rom_desc)
 682                 return -ENOMEM;
 683
 684         buffer = kmalloc(TI_MAX_I2C_SIZE, GFP_KERNEL);
 685         if (!buffer) {
 686                 kfree(rom_desc);
 687                 return -ENOMEM;
 688         }
 689
 690         /* Read the first byte (Signature0) must be 0x52 or 0x10 */
 691         status = read_rom(serial, 0, 1, buffer);
 692         if (status)
 693                 goto out;
 694
 695         if (*buffer != UMP5152 && *buffer != UMP3410) {
 696                 dev_err(dev, "%s - invalid buffer signature\n", __func__);
 697                 status = -ENODEV;
 698                 goto out;
 699         }
 700
 701         do {
 702                 /* Validate the I2C */
 703                 status = read_rom(serial,
 704                                 start_address,
 705                                 sizeof(struct ti_i2c_desc),
 706                                 (u8 *)rom_desc);
 707                 if (status)
 708                         break;
 709
 710                 if ((start_address + sizeof(struct ti_i2c_desc) +
 711                         le16_to_cpu(rom_desc->Size)) > TI_MAX_I2C_SIZE) {
 712                         status = -ENODEV;
 713                         dev_dbg(dev, "%s - structure too big, erroring out.\n", __func__);
 714                         break;
 715                 }
 716
 717                 dev_dbg(dev, "%s Type = 0x%x\n", __func__, rom_desc->Type);
 718
 719                 /* Skip type 2 record */
 720                 ttype = rom_desc->Type & 0x0f;
 721                 if (ttype != I2C_DESC_TYPE_FIRMWARE_BASIC
 722                         && ttype != I2C_DESC_TYPE_FIRMWARE_AUTO) {
 723                         /* Read the descriptor data */
 724                         status = read_rom(serial, start_address +
 725                                                 sizeof(struct ti_i2c_desc),
 726                                                 le16_to_cpu(rom_desc->Size),
 727                                                 buffer);
 728                         if (status)
 729                                 break;
 730
 731                         status = valid_csum(rom_desc, buffer);
 732                         if (status)
 733                                 break;
 734                 }
 735                 start_address = start_address + sizeof(struct ti_i2c_desc) +
 736                                                 le16_to_cpu(rom_desc->Size);
 737
 738         } while ((rom_desc->Type != I2C_DESC_TYPE_ION) &&
 739                                 (start_address < TI_MAX_I2C_SIZE));
 740
 741         if ((rom_desc->Type != I2C_DESC_TYPE_ION) ||
 742                                 (start_address > TI_MAX_I2C_SIZE))
 743                 status = -ENODEV;
 744
 745 out:
 746         kfree(buffer);
 747         kfree(rom_desc);
 748         return status;
 749 }
 750
 751 static int get_manuf_info(struct edgeport_serial *serial, u8 *buffer)
 752 {
 753         int status;
 754         int start_address;
 755         struct ti_i2c_desc *rom_desc;
 756         struct edge_ti_manuf_descriptor *desc;
 757         struct device *dev = &serial->serial->dev->dev;
 758
 759         rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
 760         if (!rom_desc)
 761                 return -ENOMEM;
 762
 763         start_address = get_descriptor_addr(serial, I2C_DESC_TYPE_ION,
 764                                                                 rom_desc);
 765
 766         if (!start_address) {
 767                 dev_dbg(dev, "%s - Edge Descriptor not found in I2C\n", __func__);
 768                 status = -ENODEV;
 769                 goto exit;
 770         }
 771
 772         /* Read the descriptor data */
 773         status = read_rom(serial, start_address+sizeof(struct ti_i2c_desc),
 774                                         le16_to_cpu(rom_desc->Size), buffer);
 775         if (status)
 776                 goto exit;
 777
 778         status = valid_csum(rom_desc, buffer);
 779
 780         desc = (struct edge_ti_manuf_descriptor *)buffer;
 781         dev_dbg(dev, "%s - IonConfig      0x%x\n", __func__, desc->IonConfig);
 782         dev_dbg(dev, "%s - Version          %d\n", __func__, desc->Version);
 783         dev_dbg(dev, "%s - Cpu/Board      0x%x\n", __func__, desc->CpuRev_BoardRev);
 784         dev_dbg(dev, "%s - NumPorts         %d\n", __func__, desc->NumPorts);
 785         dev_dbg(dev, "%s - NumVirtualPorts  %d\n", __func__, desc->NumVirtualPorts);
 786         dev_dbg(dev, "%s - TotalPorts       %d\n", __func__, desc->TotalPorts);
 787
 788 exit:
 789         kfree(rom_desc);
 790         return status;
 791 }
 792
 793 /* Build firmware header used for firmware update */
 794 static int build_i2c_fw_hdr(u8 *header, const struct firmware *fw)
 795 {
 796         u8 *buffer;
 797         int buffer_size;
 798         int i;
 799         u8 cs = 0;
 800         struct ti_i2c_desc *i2c_header;
 801         struct ti_i2c_image_header *img_header;
 802         struct ti_i2c_firmware_rec *firmware_rec;
 803         struct edgeport_fw_hdr *fw_hdr = (struct edgeport_fw_hdr *)fw->data;
 804
 805         /*
 806          * In order to update the I2C firmware we must change the type 2 record
 807          * to type 0xF2.  This will force the UMP to come up in Boot Mode.
 808          * Then while in boot mode, the driver will download the latest
 809          * firmware (padded to 15.5k) into the UMP ram.  And finally when the
 810          * device comes back up in download mode the driver will cause the new
 811          * firmware to be copied from the UMP Ram to I2C and the firmware will
 812          * update the record type from 0xf2 to 0x02.
 813          */
 814
 815         /*
 816          * Allocate a 15.5k buffer + 2 bytes for version number (Firmware
 817          * Record)
 818          */
 819         buffer_size = (((1024 * 16) - 512 ) +
 820                         sizeof(struct ti_i2c_firmware_rec));
 821
 822         buffer = kmalloc(buffer_size, GFP_KERNEL);
 823         if (!buffer)
 824                 return -ENOMEM;
 825
 826         /* Set entire image of 0xffs */
 827         memset(buffer, 0xff, buffer_size);
 828
 829         /* Copy version number into firmware record */
 830         firmware_rec = (struct ti_i2c_firmware_rec *)buffer;
 831
 832         firmware_rec->Ver_Major = fw_hdr->major_version;
 833         firmware_rec->Ver_Minor = fw_hdr->minor_version;
 834
 835         /* Pointer to fw_down memory image */
 836         img_header = (struct ti_i2c_image_header *)&fw->data[4];
 837
 838         memcpy(buffer + sizeof(struct ti_i2c_firmware_rec),
 839                 &fw->data[4 + sizeof(struct ti_i2c_image_header)],
 840                 le16_to_cpu(img_header->Length));
 841
 842         for (i=0; i < buffer_size; i++) {
 843                 cs = (u8)(cs + buffer[i]);
 844         }
 845
 846         kfree(buffer);
 847
 848         /* Build new header */
 849         i2c_header =  (struct ti_i2c_desc *)header;
 850         firmware_rec =  (struct ti_i2c_firmware_rec*)i2c_header->Data;
 851
 852         i2c_header->Type        = I2C_DESC_TYPE_FIRMWARE_BLANK;
 853         i2c_header->Size        = cpu_to_le16(buffer_size);
 854         i2c_header->CheckSum    = cs;
 855         firmware_rec->Ver_Major = fw_hdr->major_version;
 856         firmware_rec->Ver_Minor = fw_hdr->minor_version;
 857
 858         return 0;
 859 }
 860
 861 /* Try to figure out what type of I2c we have */
 862 static int i2c_type_bootmode(struct edgeport_serial *serial)
 863 {
 864         struct device *dev = &serial->serial->dev->dev;
 865         int status;
 866         u8 *data;
 867
 868         data = kmalloc(1, GFP_KERNEL);
 869         if (!data)
 870                 return -ENOMEM;
 871
 872         /* Try to read type 2 */
 873         status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ,
 874                                 DTK_ADDR_SPACE_I2C_TYPE_II, 0, data, 0x01);
 875         if (status)
 876                 dev_dbg(dev, "%s - read 2 status error = %d\n", __func__, status);
 877         else
 878                 dev_dbg(dev, "%s - read 2 data = 0x%x\n", __func__, *data);
 879         if ((!status) && (*data == UMP5152 || *data == UMP3410)) {
 880                 dev_dbg(dev, "%s - ROM_TYPE_II\n", __func__);
 881                 serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
 882                 goto out;
 883         }
 884
 885         /* Try to read type 3 */
 886         status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ,
 887                                 DTK_ADDR_SPACE_I2C_TYPE_III, 0, data, 0x01);
 888         if (status)
 889                 dev_dbg(dev, "%s - read 3 status error = %d\n", __func__, status);
 890         else
 891                 dev_dbg(dev, "%s - read 2 data = 0x%x\n", __func__, *data);
 892         if ((!status) && (*data == UMP5152 || *data == UMP3410)) {
 893                 dev_dbg(dev, "%s - ROM_TYPE_III\n", __func__);
 894                 serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_III;
 895                 goto out;
 896         }
 897
 898         dev_dbg(dev, "%s - Unknown\n", __func__);
 899         serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
 900         status = -ENODEV;
 901 out:
 902         kfree(data);
 903         return status;
 904 }
 905
 906 static int bulk_xfer(struct usb_serial *serial, void *buffer,
 907                                                 int length, int *num_sent)
 908 {
 909         int status;
 910
 911         status = usb_bulk_msg(serial->dev,
 912                         usb_sndbulkpipe(serial->dev,
 913                                 serial->port[0]->bulk_out_endpointAddress),
 914                         buffer, length, num_sent, 1000);
 915         return status;
 916 }
 917
 918 /* Download given firmware image to the device (IN BOOT MODE) */
 919 static int download_code(struct edgeport_serial *serial, u8 *image,
 920                                                         int image_length)
 921 {
 922         int status = 0;
 923         int pos;
 924         int transfer;
 925         int done;
 926
 927         /* Transfer firmware image */
 928         for (pos = 0; pos < image_length; ) {
 929                 /* Read the next buffer from file */
 930                 transfer = image_length - pos;
 931                 if (transfer > EDGE_FW_BULK_MAX_PACKET_SIZE)
 932                         transfer = EDGE_FW_BULK_MAX_PACKET_SIZE;
 933
 934                 /* Transfer data */
 935                 status = bulk_xfer(serial->serial, &image[pos],
 936                                                         transfer, &done);
 937                 if (status)
 938                         break;
 939                 /* Advance buffer pointer */
 940                 pos += done;
 941         }
 942
 943         return status;
 944 }
 945
 946 /* FIXME!!! */
 947 static int config_boot_dev(struct usb_device *dev)
 948 {
 949         return 0;
 950 }
 951
 952 static int ti_cpu_rev(struct edge_ti_manuf_descriptor *desc)
 953 {
 954         return TI_GET_CPU_REVISION(desc->CpuRev_BoardRev);
 955 }
 956
 957 static int check_fw_sanity(struct edgeport_serial *serial,
 958                 const struct firmware *fw)
 959 {
 960         u16 length_total;
 961         u8 checksum = 0;
 962         int pos;
 963         struct device *dev = &serial->serial->interface->dev;
 964         struct edgeport_fw_hdr *fw_hdr = (struct edgeport_fw_hdr *)fw->data;
 965
 966         if (fw->size < sizeof(struct edgeport_fw_hdr)) {
 967                 dev_err(dev, "incomplete fw header\n");
 968                 return -EINVAL;
 969         }
 970
 971         length_total = le16_to_cpu(fw_hdr->length) +
 972                         sizeof(struct edgeport_fw_hdr);
 973
 974         if (fw->size != length_total) {
 975                 dev_err(dev, "bad fw size (expected: %u, got: %zu)\n",
 976                                 length_total, fw->size);
 977                 return -EINVAL;
 978         }
 979
 980         for (pos = sizeof(struct edgeport_fw_hdr); pos < fw->size; ++pos)
 981                 checksum += fw->data[pos];
 982
 983         if (checksum != fw_hdr->checksum) {
 984                 dev_err(dev, "bad fw checksum (expected: 0x%x, got: 0x%x)\n",
 985                                 fw_hdr->checksum, checksum);
 986                 return -EINVAL;
 987         }
 988
 989         return 0;
 990 }
 991
 992 /*
 993  * DownloadTIFirmware - Download run-time operating firmware to the TI5052
 994  *
 995  * This routine downloads the main operating code into the TI5052, using the
 996  * boot code already burned into E2PROM or ROM.
 997  */
 998 static int download_fw(struct edgeport_serial *serial)
 999 {
1000         struct device *dev = &serial->serial->interface->dev;
1001         int status = 0;
1002         struct usb_interface_descriptor *interface;
1003         const struct firmware *fw;
1004         const char *fw_name = "edgeport/down3.bin";
1005         struct edgeport_fw_hdr *fw_hdr;
1006
1007         status = request_firmware(&fw, fw_name, dev);
1008         if (status) {
1009                 dev_err(dev, "Failed to load image \"%s\" err %d\n",
1010                                 fw_name, status);
1011                 return status;
1012         }
1013
1014         if (check_fw_sanity(serial, fw)) {
1015                 status = -EINVAL;
1016                 goto out;
1017         }
1018
1019         fw_hdr = (struct edgeport_fw_hdr *)fw->data;
1020
1021         /* If on-board version is newer, "fw_version" will be updated later. */
1022         serial->fw_version = (fw_hdr->major_version << 8) +
1023                         fw_hdr->minor_version;
1024
1025         /*
1026          * This routine is entered by both the BOOT mode and the Download mode
1027          * We can determine which code is running by the reading the config
1028          * descriptor and if we have only one bulk pipe it is in boot mode
1029          */
1030         serial->product_info.hardware_type = HARDWARE_TYPE_TIUMP;
1031
1032         /* Default to type 2 i2c */
1033         serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
1034
1035         status = choose_config(serial->serial->dev);
1036         if (status)
1037                 goto out;
1038
1039         interface = &serial->serial->interface->cur_altsetting->desc;
1040         if (!interface) {
1041                 dev_err(dev, "%s - no interface set, error!\n", __func__);
1042                 status = -ENODEV;
1043                 goto out;
1044         }
1045
1046         /*
1047          * Setup initial mode -- the default mode 0 is TI_MODE_CONFIGURING
1048          * if we have more than one endpoint we are definitely in download
1049          * mode
1050          */
1051         if (interface->bNumEndpoints > 1) {
1052                 serial->product_info.TiMode = TI_MODE_DOWNLOAD;
1053                 status = do_download_mode(serial, fw);
1054         } else {
1055                 /* Otherwise we will remain in configuring mode */
1056                 serial->product_info.TiMode = TI_MODE_CONFIGURING;
1057                 status = do_boot_mode(serial, fw);
1058         }
1059
1060 out:
1061         release_firmware(fw);
1062         return status;
1063 }
1064
1065 static int do_download_mode(struct edgeport_serial *serial,
1066                 const struct firmware *fw)
1067 {
1068         struct device *dev = &serial->serial->interface->dev;
1069         int status = 0;
1070         int start_address;
1071         struct edge_ti_manuf_descriptor *ti_manuf_desc;
1072         int download_cur_ver;
1073         int download_new_ver;
1074         struct edgeport_fw_hdr *fw_hdr = (struct edgeport_fw_hdr *)fw->data;
1075         struct ti_i2c_desc *rom_desc;
1076
1077         dev_dbg(dev, "%s - RUNNING IN DOWNLOAD MODE\n", __func__);
1078
1079         status = check_i2c_image(serial);
1080         if (status) {
1081                 dev_dbg(dev, "%s - DOWNLOAD MODE -- BAD I2C\n", __func__);
1082                 return status;
1083         }
1084
1085         /*
1086          * Validate Hardware version number
1087          * Read Manufacturing Descriptor from TI Based Edgeport
1088          */
1089         ti_manuf_desc = kmalloc(sizeof(*ti_manuf_desc), GFP_KERNEL);
1090         if (!ti_manuf_desc)
1091                 return -ENOMEM;
1092
1093         status = get_manuf_info(serial, (u8 *)ti_manuf_desc);
1094         if (status) {
1095                 kfree(ti_manuf_desc);
1096                 return status;
1097         }
1098
1099         /* Check version number of ION descriptor */
1100         if (!ignore_cpu_rev && ti_cpu_rev(ti_manuf_desc) < 2) {
1101                 dev_dbg(dev, "%s - Wrong CPU Rev %d (Must be 2)\n",
1102                         __func__, ti_cpu_rev(ti_manuf_desc));
1103                 kfree(ti_manuf_desc);
1104                 return -EINVAL;
1105         }
1106
1107         rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
1108         if (!rom_desc) {
1109                 kfree(ti_manuf_desc);
1110                 return -ENOMEM;
1111         }
1112
1113         /* Search for type 2 record (firmware record) */
1114         start_address = get_descriptor_addr(serial,
1115                         I2C_DESC_TYPE_FIRMWARE_BASIC, rom_desc);
1116         if (start_address != 0) {
1117                 struct ti_i2c_firmware_rec *firmware_version;
1118                 u8 *record;
1119
1120                 dev_dbg(dev, "%s - Found Type FIRMWARE (Type 2) record\n",
1121                                 __func__);
1122
1123                 firmware_version = kmalloc(sizeof(*firmware_version),
1124                                                         GFP_KERNEL);
1125                 if (!firmware_version) {
1126                         kfree(rom_desc);
1127                         kfree(ti_manuf_desc);
1128                         return -ENOMEM;
1129                 }
1130
1131                 /*
1132                  * Validate version number
1133                  * Read the descriptor data
1134                  */
1135                 status = read_rom(serial, start_address +
1136                                 sizeof(struct ti_i2c_desc),
1137                                 sizeof(struct ti_i2c_firmware_rec),
1138                                 (u8 *)firmware_version);
1139                 if (status) {
1140                         kfree(firmware_version);
1141                         kfree(rom_desc);
1142                         kfree(ti_manuf_desc);
1143                         return status;
1144                 }
1145
1146                 /*
1147                  * Check version number of download with current
1148                  * version in I2c
1149                  */
1150                 download_cur_ver = (firmware_version->Ver_Major << 8) +
1151                                    (firmware_version->Ver_Minor);
1152                 download_new_ver = (fw_hdr->major_version << 8) +
1153                                    (fw_hdr->minor_version);
1154
1155                 dev_dbg(dev, "%s - >> FW Versions Device %d.%d  Driver %d.%d\n",
1156                         __func__, firmware_version->Ver_Major,
1157                         firmware_version->Ver_Minor,
1158                         fw_hdr->major_version, fw_hdr->minor_version);
1159
1160                 /*
1161                  * Check if we have an old version in the I2C and
1162                  * update if necessary
1163                  */
1164                 if (download_cur_ver < download_new_ver) {
1165                         dev_dbg(dev, "%s - Update I2C dld from %d.%d to %d.%d\n",
1166                                 __func__,
1167                                 firmware_version->Ver_Major,
1168                                 firmware_version->Ver_Minor,
1169                                 fw_hdr->major_version,
1170                                 fw_hdr->minor_version);
1171
1172                         record = kmalloc(1, GFP_KERNEL);
1173                         if (!record) {
1174                                 kfree(firmware_version);
1175                                 kfree(rom_desc);
1176                                 kfree(ti_manuf_desc);
1177                                 return -ENOMEM;
1178                         }
1179                         /*
1180                          * In order to update the I2C firmware we must
1181                          * change the type 2 record to type 0xF2. This
1182                          * will force the UMP to come up in Boot Mode.
1183                          * Then while in boot mode, the driver will
1184                          * download the latest firmware (padded to
1185                          * 15.5k) into the UMP ram. Finally when the
1186                          * device comes back up in download mode the
1187                          * driver will cause the new firmware to be
1188                          * copied from the UMP Ram to I2C and the
1189                          * firmware will update the record type from
1190                          * 0xf2 to 0x02.
1191                          */
1192                         *record = I2C_DESC_TYPE_FIRMWARE_BLANK;
1193
1194                         /*
1195                          * Change the I2C Firmware record type to
1196                          * 0xf2 to trigger an update
1197                          */
1198                         status = write_rom(serial, start_address,
1199                                         sizeof(*record), record);
1200                         if (status) {
1201                                 kfree(record);
1202                                 kfree(firmware_version);
1203                                 kfree(rom_desc);
1204                                 kfree(ti_manuf_desc);
1205                                 return status;
1206                         }
1207
1208                         /*
1209                          * verify the write -- must do this in order
1210                          * for write to complete before we do the
1211                          * hardware reset
1212                          */
1213                         status = read_rom(serial,
1214                                                 start_address,
1215                                                 sizeof(*record),
1216                                                 record);
1217                         if (status) {
1218                                 kfree(record);
1219                                 kfree(firmware_version);
1220                                 kfree(rom_desc);
1221                                 kfree(ti_manuf_desc);
1222                                 return status;
1223                         }
1224
1225                         if (*record != I2C_DESC_TYPE_FIRMWARE_BLANK) {
1226                                 dev_err(dev, "%s - error resetting device\n",
1227                                                 __func__);
1228                                 kfree(record);
1229                                 kfree(firmware_version);
1230                                 kfree(rom_desc);
1231                                 kfree(ti_manuf_desc);
1232                                 return -ENODEV;
1233                         }
1234
1235                         dev_dbg(dev, "%s - HARDWARE RESET\n", __func__);
1236
1237                         /* Reset UMP -- Back to BOOT MODE */
1238                         status = ti_vsend_sync(serial->serial->dev,
1239                                         UMPC_HARDWARE_RESET,
1240                                         0, 0, NULL, 0,
1241                                         TI_VSEND_TIMEOUT_DEFAULT);
1242
1243                         dev_dbg(dev, "%s - HARDWARE RESET return %d\n",
1244                                         __func__, status);
1245
1246                         /* return an error on purpose. */
1247                         kfree(record);
1248                         kfree(firmware_version);
1249                         kfree(rom_desc);
1250                         kfree(ti_manuf_desc);
1251                         return -ENODEV;
1252                 }
1253                 /* Same or newer fw version is already loaded */
1254                 serial->fw_version = download_cur_ver;
1255                 kfree(firmware_version);
1256         }
1257         /* Search for type 0xF2 record (firmware blank record) */
1258         else {
1259                 start_address = get_descriptor_addr(serial,
1260                                 I2C_DESC_TYPE_FIRMWARE_BLANK, rom_desc);
1261                 if (start_address != 0) {
1262 #define HEADER_SIZE     (sizeof(struct ti_i2c_desc) + \
1263                                 sizeof(struct ti_i2c_firmware_rec))
1264                         u8 *header;
1265                         u8 *vheader;
1266
1267                         header = kmalloc(HEADER_SIZE, GFP_KERNEL);
1268                         if (!header) {
1269                                 kfree(rom_desc);
1270                                 kfree(ti_manuf_desc);
1271                                 return -ENOMEM;
1272                         }
1273
1274                         vheader = kmalloc(HEADER_SIZE, GFP_KERNEL);
1275                         if (!vheader) {
1276                                 kfree(header);
1277                                 kfree(rom_desc);
1278                                 kfree(ti_manuf_desc);
1279                                 return -ENOMEM;
1280                         }
1281
1282                         dev_dbg(dev, "%s - Found Type BLANK FIRMWARE (Type F2) record\n",
1283                                         __func__);
1284
1285                         /*
1286                          * In order to update the I2C firmware we must change
1287                          * the type 2 record to type 0xF2. This will force the
1288                          * UMP to come up in Boot Mode.  Then while in boot
1289                          * mode, the driver will download the latest firmware
1290                          * (padded to 15.5k) into the UMP ram. Finally when the
1291                          * device comes back up in download mode the driver
1292                          * will cause the new firmware to be copied from the
1293                          * UMP Ram to I2C and the firmware will update the
1294                          * record type from 0xf2 to 0x02.
1295                          */
1296                         status = build_i2c_fw_hdr(header, fw);
1297                         if (status) {
1298                                 kfree(vheader);
1299                                 kfree(header);
1300                                 kfree(rom_desc);
1301                                 kfree(ti_manuf_desc);
1302                                 return -EINVAL;
1303                         }
1304
1305                         /*
1306                          * Update I2C with type 0xf2 record with correct
1307                          * size and checksum
1308                          */
1309                         status = write_rom(serial,
1310                                                 start_address,
1311                                                 HEADER_SIZE,
1312                                                 header);
1313                         if (status) {
1314                                 kfree(vheader);
1315                                 kfree(header);
1316                                 kfree(rom_desc);
1317                                 kfree(ti_manuf_desc);
1318                                 return -EINVAL;
1319                         }
1320
1321                         /*
1322                          * verify the write -- must do this in order for
1323                          * write to complete before we do the hardware reset
1324                          */
1325                         status = read_rom(serial, start_address,
1326                                                         HEADER_SIZE, vheader);
1327
1328                         if (status) {
1329                                 dev_dbg(dev, "%s - can't read header back\n",
1330                                                 __func__);
1331                                 kfree(vheader);
1332                                 kfree(header);
1333                                 kfree(rom_desc);
1334                                 kfree(ti_manuf_desc);
1335                                 return status;
1336                         }
1337                         if (memcmp(vheader, header, HEADER_SIZE)) {
1338                                 dev_dbg(dev, "%s - write download record failed\n",
1339                                                 __func__);
1340                                 kfree(vheader);
1341                                 kfree(header);
1342                                 kfree(rom_desc);
1343                                 kfree(ti_manuf_desc);
1344                                 return -EINVAL;
1345                         }
1346
1347                         kfree(vheader);
1348                         kfree(header);
1349
1350                         dev_dbg(dev, "%s - Start firmware update\n", __func__);
1351
1352                         /* Tell firmware to copy download image into I2C */
1353                         status = ti_vsend_sync(serial->serial->dev,
1354                                         UMPC_COPY_DNLD_TO_I2C,
1355                                         0, 0, NULL, 0,
1356                                         TI_VSEND_TIMEOUT_FW_DOWNLOAD);
1357
1358                         dev_dbg(dev, "%s - Update complete 0x%x\n", __func__,
1359                                         status);
1360                         if (status) {
1361                                 dev_err(dev,
1362                                         "%s - UMPC_COPY_DNLD_TO_I2C failed\n",
1363                                         __func__);
1364                                 kfree(rom_desc);
1365                                 kfree(ti_manuf_desc);
1366                                 return status;
1367                         }
1368                 }
1369         }
1370
1371         /* The device is running the download code */
1372         kfree(rom_desc);
1373         kfree(ti_manuf_desc);
1374         return 0;
1375 }
1376
1377 static int do_boot_mode(struct edgeport_serial *serial,
1378                 const struct firmware *fw)
1379 {
1380         struct device *dev = &serial->serial->interface->dev;
1381         int status = 0;
1382         struct edge_ti_manuf_descriptor *ti_manuf_desc;
1383         struct edgeport_fw_hdr *fw_hdr = (struct edgeport_fw_hdr *)fw->data;
1384
1385         dev_dbg(dev, "%s - RUNNING IN BOOT MODE\n", __func__);
1386
1387         /* Configure the TI device so we can use the BULK pipes for download */
1388         status = config_boot_dev(serial->serial->dev);
1389         if (status)
1390                 return status;
1391
1392         if (le16_to_cpu(serial->serial->dev->descriptor.idVendor)
1393                                                         != USB_VENDOR_ID_ION) {
1394                 dev_dbg(dev, "%s - VID = 0x%x\n", __func__,
1395                         le16_to_cpu(serial->serial->dev->descriptor.idVendor));
1396                 serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
1397                 goto stayinbootmode;
1398         }
1399
1400         /*
1401          * We have an ION device (I2c Must be programmed)
1402          * Determine I2C image type
1403          */
1404         if (i2c_type_bootmode(serial))
1405                 goto stayinbootmode;
1406
1407         /* Check for ION Vendor ID and that the I2C is valid */
1408         if (!check_i2c_image(serial)) {
1409                 struct ti_i2c_image_header *header;
1410                 int i;
1411                 u8 cs = 0;
1412                 u8 *buffer;
1413                 int buffer_size;
1414
1415                 /*
1416                  * Validate Hardware version number
1417                  * Read Manufacturing Descriptor from TI Based Edgeport
1418                  */
1419                 ti_manuf_desc = kmalloc(sizeof(*ti_manuf_desc), GFP_KERNEL);
1420                 if (!ti_manuf_desc)
1421                         return -ENOMEM;
1422
1423                 status = get_manuf_info(serial, (u8 *)ti_manuf_desc);
1424                 if (status) {
1425                         kfree(ti_manuf_desc);
1426                         goto stayinbootmode;
1427                 }
1428
1429                 /* Check for version 2 */
1430                 if (!ignore_cpu_rev && ti_cpu_rev(ti_manuf_desc) < 2) {
1431                         dev_dbg(dev, "%s - Wrong CPU Rev %d (Must be 2)\n",
1432                                 __func__, ti_cpu_rev(ti_manuf_desc));
1433                         kfree(ti_manuf_desc);
1434                         goto stayinbootmode;
1435                 }
1436
1437                 kfree(ti_manuf_desc);
1438
1439                 /*
1440                  * In order to update the I2C firmware we must change the type
1441                  * 2 record to type 0xF2. This will force the UMP to come up
1442                  * in Boot Mode.  Then while in boot mode, the driver will
1443                  * download the latest firmware (padded to 15.5k) into the
1444                  * UMP ram. Finally when the device comes back up in download
1445                  * mode the driver will cause the new firmware to be copied
1446                  * from the UMP Ram to I2C and the firmware will update the
1447                  * record type from 0xf2 to 0x02.
1448                  *
1449                  * Do we really have to copy the whole firmware image,
1450                  * or could we do this in place!
1451                  */
1452
1453                 /* Allocate a 15.5k buffer + 3 byte header */
1454                 buffer_size = (((1024 * 16) - 512) +
1455                                         sizeof(struct ti_i2c_image_header));
1456                 buffer = kmalloc(buffer_size, GFP_KERNEL);
1457                 if (!buffer)
1458                         return -ENOMEM;
1459
1460                 /* Initialize the buffer to 0xff (pad the buffer) */
1461                 memset(buffer, 0xff, buffer_size);
1462                 memcpy(buffer, &fw->data[4], fw->size - 4);
1463
1464                 for (i = sizeof(struct ti_i2c_image_header);
1465                                 i < buffer_size; i++) {
1466                         cs = (u8)(cs + buffer[i]);
1467                 }
1468
1469                 header = (struct ti_i2c_image_header *)buffer;
1470
1471                 /* update length and checksum after padding */
1472                 header->Length = cpu_to_le16((u16)(buffer_size -
1473                                         sizeof(struct ti_i2c_image_header)));
1474                 header->CheckSum = cs;
1475
1476                 /* Download the operational code  */
1477                 dev_dbg(dev, "%s - Downloading operational code image version %d.%d (TI UMP)\n",
1478                                 __func__,
1479                                 fw_hdr->major_version, fw_hdr->minor_version);
1480                 status = download_code(serial, buffer, buffer_size);
1481
1482                 kfree(buffer);
1483
1484                 if (status) {
1485                         dev_dbg(dev, "%s - Error downloading operational code image\n", __func__);
1486                         return status;
1487                 }
1488
1489                 /* Device will reboot */
1490                 serial->product_info.TiMode = TI_MODE_TRANSITIONING;
1491
1492                 dev_dbg(dev, "%s - Download successful -- Device rebooting...\n", __func__);
1493
1494                 return 1;
1495         }
1496
1497 stayinbootmode:
1498         /* Eprom is invalid or blank stay in boot mode */
1499         dev_dbg(dev, "%s - STAYING IN BOOT MODE\n", __func__);
1500         serial->product_info.TiMode = TI_MODE_BOOT;
1501
1502         return 1;
1503 }
1504
1505 static int ti_do_config(struct edgeport_port *port, int feature, int on)
1506 {
1507         on = !!on;      /* 1 or 0 not bitmask */
1508
1509         return send_port_cmd(port->port, feature, on, NULL, 0);
1510 }
1511
1512 static int restore_mcr(struct edgeport_port *port, u8 mcr)
1513 {
1514         int status = 0;
1515
1516         dev_dbg(&port->port->dev, "%s - %x\n", __func__, mcr);
1517
1518         status = ti_do_config(port, UMPC_SET_CLR_DTR, mcr & MCR_DTR);
1519         if (status)
1520                 return status;
1521         status = ti_do_config(port, UMPC_SET_CLR_RTS, mcr & MCR_RTS);
1522         if (status)
1523                 return status;
1524         return ti_do_config(port, UMPC_SET_CLR_LOOPBACK, mcr & MCR_LOOPBACK);
1525 }
1526
1527 /* Convert TI LSR to standard UART flags */
1528 static u8 map_line_status(u8 ti_lsr)
1529 {
1530         u8 lsr = 0;
1531
1532 #define MAP_FLAG(flagUmp, flagUart)    \
1533         if (ti_lsr & flagUmp) \
1534                 lsr |= flagUart;
1535
1536         MAP_FLAG(UMP_UART_LSR_OV_MASK, LSR_OVER_ERR)    /* overrun */
1537         MAP_FLAG(UMP_UART_LSR_PE_MASK, LSR_PAR_ERR)     /* parity error */
1538         MAP_FLAG(UMP_UART_LSR_FE_MASK, LSR_FRM_ERR)     /* framing error */
1539         MAP_FLAG(UMP_UART_LSR_BR_MASK, LSR_BREAK)       /* break detected */
1540         MAP_FLAG(UMP_UART_LSR_RX_MASK, LSR_RX_AVAIL)    /* rx data available */
1541         MAP_FLAG(UMP_UART_LSR_TX_MASK, LSR_TX_EMPTY)    /* tx hold reg empty */
1542
1543 #undef MAP_FLAG
1544
1545         return lsr;
1546 }
1547
1548 static void handle_new_msr(struct edgeport_port *edge_port, u8 msr)
1549 {
1550         struct async_icount *icount;
1551         struct tty_struct *tty;
1552
1553         dev_dbg(&edge_port->port->dev, "%s - %02x\n", __func__, msr);
1554
1555         if (msr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR |
1556                         EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) {
1557                 icount = &edge_port->port->icount;
1558
1559                 /* update input line counters */
1560                 if (msr & EDGEPORT_MSR_DELTA_CTS)
1561                         icount->cts++;
1562                 if (msr & EDGEPORT_MSR_DELTA_DSR)
1563                         icount->dsr++;
1564                 if (msr & EDGEPORT_MSR_DELTA_CD)
1565                         icount->dcd++;
1566                 if (msr & EDGEPORT_MSR_DELTA_RI)
1567                         icount->rng++;
1568                 wake_up_interruptible(&edge_port->port->port.delta_msr_wait);
1569         }
1570
1571         /* Save the new modem status */
1572         edge_port->shadow_msr = msr & 0xf0;
1573
1574         tty = tty_port_tty_get(&edge_port->port->port);
1575         /* handle CTS flow control */
1576         if (tty && C_CRTSCTS(tty)) {
1577                 if (msr & EDGEPORT_MSR_CTS)
1578                         tty_wakeup(tty);
1579         }
1580         tty_kref_put(tty);
1581 }
1582
1583 static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data,
1584                                                         u8 lsr, u8 data)
1585 {
1586         struct async_icount *icount;
1587         u8 new_lsr = (u8)(lsr & (u8)(LSR_OVER_ERR | LSR_PAR_ERR |
1588                                                 LSR_FRM_ERR | LSR_BREAK));
1589
1590         dev_dbg(&edge_port->port->dev, "%s - %02x\n", __func__, new_lsr);
1591
1592         edge_port->shadow_lsr = lsr;
1593
1594         if (new_lsr & LSR_BREAK)
1595                 /*
1596                  * Parity and Framing errors only count if they
1597                  * occur exclusive of a break being received.
1598                  */
1599                 new_lsr &= (u8)(LSR_OVER_ERR | LSR_BREAK);
1600
1601         /* Place LSR data byte into Rx buffer */
1602         if (lsr_data)
1603                 edge_tty_recv(edge_port->port, &data, 1);
1604
1605         /* update input line counters */
1606         icount = &edge_port->port->icount;
1607         if (new_lsr & LSR_BREAK)
1608                 icount->brk++;
1609         if (new_lsr & LSR_OVER_ERR)
1610                 icount->overrun++;
1611         if (new_lsr & LSR_PAR_ERR)
1612                 icount->parity++;
1613         if (new_lsr & LSR_FRM_ERR)
1614                 icount->frame++;
1615 }
1616
1617 static void edge_interrupt_callback(struct urb *urb)
1618 {
1619         struct edgeport_serial *edge_serial = urb->context;
1620         struct usb_serial_port *port;
1621         struct edgeport_port *edge_port;
1622         struct device *dev;
1623         unsigned char *data = urb->transfer_buffer;
1624         int length = urb->actual_length;
1625         int port_number;
1626         int function;
1627         int retval;
1628         u8 lsr;
1629         u8 msr;
1630         int status = urb->status;
1631
1632         switch (status) {
1633         case 0:
1634                 /* success */
1635                 break;
1636         case -ECONNRESET:
1637         case -ENOENT:
1638         case -ESHUTDOWN:
1639                 /* this urb is terminated, clean up */
1640                 dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n",
1641                     __func__, status);
1642                 return;
1643         default:
1644                 dev_err(&urb->dev->dev, "%s - nonzero urb status received: "
1645                         "%d\n", __func__, status);
1646                 goto exit;
1647         }
1648
1649         if (!length) {
1650                 dev_dbg(&urb->dev->dev, "%s - no data in urb\n", __func__);
1651                 goto exit;
1652         }
1653
1654         dev = &edge_serial->serial->dev->dev;
1655         usb_serial_debug_data(dev, __func__, length, data);
1656
1657         if (length != 2) {
1658                 dev_dbg(dev, "%s - expecting packet of size 2, got %d\n", __func__, length);
1659                 goto exit;
1660         }
1661
1662         port_number = TIUMP_GET_PORT_FROM_CODE(data[0]);
1663         function    = TIUMP_GET_FUNC_FROM_CODE(data[0]);
1664         dev_dbg(dev, "%s - port_number %d, function %d, info 0x%x\n", __func__,
1665                 port_number, function, data[1]);
1666
1667         if (port_number >= edge_serial->serial->num_ports) {
1668                 dev_err(dev, "bad port number %d\n", port_number);
1669                 goto exit;
1670         }
1671
1672         port = edge_serial->serial->port[port_number];
1673         edge_port = usb_get_serial_port_data(port);
1674         if (!edge_port) {
1675                 dev_dbg(dev, "%s - edge_port not found\n", __func__);
1676                 return;
1677         }
1678         switch (function) {
1679         case TIUMP_INTERRUPT_CODE_LSR:
1680                 lsr = map_line_status(data[1]);
1681                 if (lsr & UMP_UART_LSR_DATA_MASK) {
1682                         /*
1683                          * Save the LSR event for bulk read completion routine
1684                          */
1685                         dev_dbg(dev, "%s - LSR Event Port %u LSR Status = %02x\n",
1686                                 __func__, port_number, lsr);
1687                         edge_port->lsr_event = 1;
1688                         edge_port->lsr_mask = lsr;
1689                 } else {
1690                         dev_dbg(dev, "%s - ===== Port %d LSR Status = %02x ======\n",
1691                                 __func__, port_number, lsr);
1692                         handle_new_lsr(edge_port, 0, lsr, 0);
1693                 }
1694                 break;
1695
1696         case TIUMP_INTERRUPT_CODE_MSR:  /* MSR */
1697                 /* Copy MSR from UMP */
1698                 msr = data[1];
1699                 dev_dbg(dev, "%s - ===== Port %u MSR Status = %02x ======\n",
1700                         __func__, port_number, msr);
1701                 handle_new_msr(edge_port, msr);
1702                 break;
1703
1704         default:
1705                 dev_err(&urb->dev->dev,
1706                         "%s - Unknown Interrupt code from UMP %x\n",
1707                         __func__, data[1]);
1708                 break;
1709
1710         }
1711
1712 exit:
1713         retval = usb_submit_urb(urb, GFP_ATOMIC);
1714         if (retval)
1715                 dev_err(&urb->dev->dev,
1716                         "%s - usb_submit_urb failed with result %d\n",
1717                          __func__, retval);
1718 }
1719
1720 static void edge_bulk_in_callback(struct urb *urb)
1721 {
1722         struct edgeport_port *edge_port = urb->context;
1723         struct device *dev = &edge_port->port->dev;
1724         unsigned char *data = urb->transfer_buffer;
1725         unsigned long flags;
1726         int retval = 0;
1727         int port_number;
1728         int status = urb->status;
1729
1730         switch (status) {
1731         case 0:
1732                 /* success */
1733                 break;
1734         case -ECONNRESET:
1735         case -ENOENT:
1736         case -ESHUTDOWN:
1737                 /* this urb is terminated, clean up */
1738                 dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status);
1739                 return;
1740         default:
1741                 dev_err(&urb->dev->dev, "%s - nonzero read bulk status received: %d\n", __func__, status);
1742         }
1743
1744         if (status == -EPIPE)
1745                 goto exit;
1746
1747         if (status) {
1748                 dev_err(&urb->dev->dev, "%s - stopping read!\n", __func__);
1749                 return;
1750         }
1751
1752         port_number = edge_port->port->port_number;
1753
1754         if (urb->actual_length > 0 && edge_port->lsr_event) {
1755                 edge_port->lsr_event = 0;
1756                 dev_dbg(dev, "%s ===== Port %u LSR Status = %02x, Data = %02x ======\n",
1757                         __func__, port_number, edge_port->lsr_mask, *data);
1758                 handle_new_lsr(edge_port, 1, edge_port->lsr_mask, *data);
1759                 /* Adjust buffer length/pointer */
1760                 --urb->actual_length;
1761                 ++data;
1762         }
1763
1764         if (urb->actual_length) {
1765                 usb_serial_debug_data(dev, __func__, urb->actual_length, data);
1766                 if (edge_port->close_pending)
1767                         dev_dbg(dev, "%s - close pending, dropping data on the floor\n",
1768                                                                 __func__);
1769                 else
1770                         edge_tty_recv(edge_port->port, data,
1771                                         urb->actual_length);
1772                 edge_port->port->icount.rx += urb->actual_length;
1773         }
1774
1775 exit:
1776         /* continue read unless stopped */
1777         spin_lock_irqsave(&edge_port->ep_lock, flags);
1778         if (edge_port->ep_read_urb_state == EDGE_READ_URB_RUNNING)
1779                 retval = usb_submit_urb(urb, GFP_ATOMIC);
1780         else if (edge_port->ep_read_urb_state == EDGE_READ_URB_STOPPING)
1781                 edge_port->ep_read_urb_state = EDGE_READ_URB_STOPPED;
1782
1783         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1784         if (retval)
1785                 dev_err(dev, "%s - usb_submit_urb failed with result %d\n", __func__, retval);
1786 }
1787
1788 static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data,
1789                 int length)
1790 {
1791         int queued;
1792
1793         queued = tty_insert_flip_string(&port->port, data, length);
1794         if (queued < length)
1795                 dev_err(&port->dev, "%s - dropping data, %d bytes lost\n",
1796                         __func__, length - queued);
1797         tty_flip_buffer_push(&port->port);
1798 }
1799
1800 static void edge_bulk_out_callback(struct urb *urb)
1801 {
1802         struct usb_serial_port *port = urb->context;
1803         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1804         int status = urb->status;
1805         struct tty_struct *tty;
1806
1807         edge_port->ep_write_urb_in_use = 0;
1808
1809         switch (status) {
1810         case 0:
1811                 /* success */
1812                 break;
1813         case -ECONNRESET:
1814         case -ENOENT:
1815         case -ESHUTDOWN:
1816                 /* this urb is terminated, clean up */
1817                 dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n",
1818                     __func__, status);
1819                 return;
1820         default:
1821                 dev_err_console(port, "%s - nonzero write bulk status "
1822                         "received: %d\n", __func__, status);
1823         }
1824
1825         /* send any buffered data */
1826         tty = tty_port_tty_get(&port->port);
1827         edge_send(port, tty);
1828         tty_kref_put(tty);
1829 }
1830
1831 static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
1832 {
1833         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
1834         struct edgeport_serial *edge_serial;
1835         struct usb_device *dev;
1836         struct urb *urb;
1837         int status;
1838         u16 open_settings;
1839         u8 transaction_timeout;
1840
1841         if (edge_port == NULL)
1842                 return -ENODEV;
1843
1844         dev = port->serial->dev;
1845
1846         /* turn off loopback */
1847         status = ti_do_config(edge_port, UMPC_SET_CLR_LOOPBACK, 0);
1848         if (status) {
1849                 dev_err(&port->dev,
1850                                 "%s - cannot send clear loopback command, %d\n",
1851                         __func__, status);
1852                 return status;
1853         }
1854
1855         /* set up the port settings */
1856         if (tty)
1857                 edge_set_termios(tty, port, &tty->termios);
1858
1859         /* open up the port */
1860
1861         /* milliseconds to timeout for DMA transfer */
1862         transaction_timeout = 2;
1863
1864         edge_port->ump_read_timeout =
1865                                 max(20, ((transaction_timeout * 3) / 2));
1866
1867         /* milliseconds to timeout for DMA transfer */
1868         open_settings = (u8)(UMP_DMA_MODE_CONTINOUS |
1869                              UMP_PIPE_TRANS_TIMEOUT_ENA |
1870                              (transaction_timeout << 2));
1871
1872         dev_dbg(&port->dev, "%s - Sending UMPC_OPEN_PORT\n", __func__);
1873
1874         /* Tell TI to open and start the port */
1875         status = send_port_cmd(port, UMPC_OPEN_PORT, open_settings, NULL, 0);
1876         if (status) {
1877                 dev_err(&port->dev, "%s - cannot send open command, %d\n",
1878                                                         __func__, status);
1879                 return status;
1880         }
1881
1882         /* Start the DMA? */
1883         status = send_port_cmd(port, UMPC_START_PORT, 0, NULL, 0);
1884         if (status) {
1885                 dev_err(&port->dev, "%s - cannot send start DMA command, %d\n",
1886                                                         __func__, status);
1887                 return status;
1888         }
1889
1890         /* Clear TX and RX buffers in UMP */
1891         status = purge_port(port, UMP_PORT_DIR_OUT | UMP_PORT_DIR_IN);
1892         if (status) {
1893                 dev_err(&port->dev,
1894                         "%s - cannot send clear buffers command, %d\n",
1895                         __func__, status);
1896                 return status;
1897         }
1898
1899         /* Read Initial MSR */
1900         status = read_port_cmd(port, UMPC_READ_MSR, 0, &edge_port->shadow_msr, 1);
1901         if (status) {
1902                 dev_err(&port->dev, "%s - cannot send read MSR command, %d\n",
1903                                                         __func__, status);
1904                 return status;
1905         }
1906
1907         dev_dbg(&port->dev, "ShadowMSR 0x%X\n", edge_port->shadow_msr);
1908
1909         /* Set Initial MCR */
1910         edge_port->shadow_mcr = MCR_RTS | MCR_DTR;
1911         dev_dbg(&port->dev, "ShadowMCR 0x%X\n", edge_port->shadow_mcr);
1912
1913         edge_serial = edge_port->edge_serial;
1914         if (mutex_lock_interruptible(&edge_serial->es_lock))
1915                 return -ERESTARTSYS;
1916         if (edge_serial->num_ports_open == 0) {
1917                 /* we are the first port to open, post the interrupt urb */
1918                 urb = edge_serial->serial->port[0]->interrupt_in_urb;
1919                 urb->context = edge_serial;
1920                 status = usb_submit_urb(urb, GFP_KERNEL);
1921                 if (status) {
1922                         dev_err(&port->dev,
1923                                 "%s - usb_submit_urb failed with value %d\n",
1924                                         __func__, status);
1925                         goto release_es_lock;
1926                 }
1927         }
1928
1929         /*
1930          * reset the data toggle on the bulk endpoints to work around bug in
1931          * host controllers where things get out of sync some times
1932          */
1933         usb_clear_halt(dev, port->write_urb->pipe);
1934         usb_clear_halt(dev, port->read_urb->pipe);
1935
1936         /* start up our bulk read urb */
1937         urb = port->read_urb;
1938         edge_port->ep_read_urb_state = EDGE_READ_URB_RUNNING;
1939         urb->context = edge_port;
1940         status = usb_submit_urb(urb, GFP_KERNEL);
1941         if (status) {
1942                 dev_err(&port->dev,
1943                         "%s - read bulk usb_submit_urb failed with value %d\n",
1944                                 __func__, status);
1945                 goto unlink_int_urb;
1946         }
1947
1948         ++edge_serial->num_ports_open;
1949
1950         goto release_es_lock;
1951
1952 unlink_int_urb:
1953         if (edge_port->edge_serial->num_ports_open == 0)
1954                 usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
1955 release_es_lock:
1956         mutex_unlock(&edge_serial->es_lock);
1957         return status;
1958 }
1959
1960 static void edge_close(struct usb_serial_port *port)
1961 {
1962         struct edgeport_serial *edge_serial;
1963         struct edgeport_port *edge_port;
1964         unsigned long flags;
1965
1966         edge_serial = usb_get_serial_data(port->serial);
1967         edge_port = usb_get_serial_port_data(port);
1968         if (edge_serial == NULL || edge_port == NULL)
1969                 return;
1970
1971         /*
1972          * The bulkreadcompletion routine will check
1973          * this flag and dump add read data
1974          */
1975         edge_port->close_pending = 1;
1976
1977         usb_kill_urb(port->read_urb);
1978         usb_kill_urb(port->write_urb);
1979         edge_port->ep_write_urb_in_use = 0;
1980         spin_lock_irqsave(&edge_port->ep_lock, flags);
1981         kfifo_reset_out(&port->write_fifo);
1982         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
1983
1984         dev_dbg(&port->dev, "%s - send umpc_close_port\n", __func__);
1985         send_port_cmd(port, UMPC_CLOSE_PORT, 0, NULL, 0);
1986
1987         mutex_lock(&edge_serial->es_lock);
1988         --edge_port->edge_serial->num_ports_open;
1989         if (edge_port->edge_serial->num_ports_open <= 0) {
1990                 /* last port is now closed, let's shut down our interrupt urb */
1991                 usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
1992                 edge_port->edge_serial->num_ports_open = 0;
1993         }
1994         mutex_unlock(&edge_serial->es_lock);
1995         edge_port->close_pending = 0;
1996 }
1997
1998 static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
1999                                 const unsigned char *data, int count)
2000 {
2001         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2002
2003         if (count == 0) {
2004                 dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__);
2005                 return 0;
2006         }
2007
2008         if (edge_port == NULL)
2009                 return -ENODEV;
2010         if (edge_port->close_pending == 1)
2011                 return -ENODEV;
2012
2013         count = kfifo_in_locked(&port->write_fifo, data, count,
2014                                                         &edge_port->ep_lock);
2015         edge_send(port, tty);
2016
2017         return count;
2018 }
2019
2020 static void edge_send(struct usb_serial_port *port, struct tty_struct *tty)
2021 {
2022         int count, result;
2023         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2024         unsigned long flags;
2025
2026         spin_lock_irqsave(&edge_port->ep_lock, flags);
2027
2028         if (edge_port->ep_write_urb_in_use) {
2029                 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2030                 return;
2031         }
2032
2033         count = kfifo_out(&port->write_fifo,
2034                                 port->write_urb->transfer_buffer,
2035                                 port->bulk_out_size);
2036
2037         if (count == 0) {
2038                 spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2039                 return;
2040         }
2041
2042         edge_port->ep_write_urb_in_use = 1;
2043
2044         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2045
2046         usb_serial_debug_data(&port->dev, __func__, count, port->write_urb->transfer_buffer);
2047
2048         /* set up our urb */
2049         port->write_urb->transfer_buffer_length = count;
2050
2051         /* send the data out the bulk port */
2052         result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
2053         if (result) {
2054                 dev_err_console(port,
2055                         "%s - failed submitting write urb, error %d\n",
2056                                 __func__, result);
2057                 edge_port->ep_write_urb_in_use = 0;
2058                 /* TODO: reschedule edge_send */
2059         } else
2060                 edge_port->port->icount.tx += count;
2061
2062         /*
2063          * wakeup any process waiting for writes to complete
2064          * there is now more room in the buffer for new writes
2065          */
2066         if (tty)
2067                 tty_wakeup(tty);
2068 }
2069
2070 static unsigned int edge_write_room(struct tty_struct *tty)
2071 {
2072         struct usb_serial_port *port = tty->driver_data;
2073         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2074         unsigned int room;
2075         unsigned long flags;
2076
2077         if (edge_port == NULL)
2078                 return 0;
2079         if (edge_port->close_pending == 1)
2080                 return 0;
2081
2082         spin_lock_irqsave(&edge_port->ep_lock, flags);
2083         room = kfifo_avail(&port->write_fifo);
2084         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2085
2086         dev_dbg(&port->dev, "%s - returns %u\n", __func__, room);
2087         return room;
2088 }
2089
2090 static unsigned int edge_chars_in_buffer(struct tty_struct *tty)
2091 {
2092         struct usb_serial_port *port = tty->driver_data;
2093         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2094         unsigned int chars;
2095         unsigned long flags;
2096         if (edge_port == NULL)
2097                 return 0;
2098
2099         spin_lock_irqsave(&edge_port->ep_lock, flags);
2100         chars = kfifo_len(&port->write_fifo);
2101         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2102
2103         dev_dbg(&port->dev, "%s - returns %u\n", __func__, chars);
2104         return chars;
2105 }
2106
2107 static bool edge_tx_empty(struct usb_serial_port *port)
2108 {
2109         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2110         int ret;
2111
2112         ret = tx_active(edge_port);
2113         if (ret > 0)
2114                 return false;
2115
2116         return true;
2117 }
2118
2119 static void edge_throttle(struct tty_struct *tty)
2120 {
2121         struct usb_serial_port *port = tty->driver_data;
2122         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2123         int status;
2124
2125         if (edge_port == NULL)
2126                 return;
2127
2128         /* if we are implementing XON/XOFF, send the stop character */
2129         if (I_IXOFF(tty)) {
2130                 unsigned char stop_char = STOP_CHAR(tty);
2131                 status = edge_write(tty, port, &stop_char, 1);
2132                 if (status <= 0) {
2133                         dev_err(&port->dev, "%s - failed to write stop character, %d\n", __func__, status);
2134                 }
2135         }
2136
2137         /*
2138          * if we are implementing RTS/CTS, stop reads
2139          * and the Edgeport will clear the RTS line
2140          */
2141         if (C_CRTSCTS(tty))
2142                 stop_read(edge_port);
2143
2144 }
2145
2146 static void edge_unthrottle(struct tty_struct *tty)
2147 {
2148         struct usb_serial_port *port = tty->driver_data;
2149         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2150         int status;
2151
2152         if (edge_port == NULL)
2153                 return;
2154
2155         /* if we are implementing XON/XOFF, send the start character */
2156         if (I_IXOFF(tty)) {
2157                 unsigned char start_char = START_CHAR(tty);
2158                 status = edge_write(tty, port, &start_char, 1);
2159                 if (status <= 0) {
2160                         dev_err(&port->dev, "%s - failed to write start character, %d\n", __func__, status);
2161                 }
2162         }
2163         /*
2164          * if we are implementing RTS/CTS, restart reads
2165          * are the Edgeport will assert the RTS line
2166          */
2167         if (C_CRTSCTS(tty)) {
2168                 status = restart_read(edge_port);
2169                 if (status)
2170                         dev_err(&port->dev,
2171                                 "%s - read bulk usb_submit_urb failed: %d\n",
2172                                                         __func__, status);
2173         }
2174
2175 }
2176
2177 static void stop_read(struct edgeport_port *edge_port)
2178 {
2179         unsigned long flags;
2180
2181         spin_lock_irqsave(&edge_port->ep_lock, flags);
2182
2183         if (edge_port->ep_read_urb_state == EDGE_READ_URB_RUNNING)
2184                 edge_port->ep_read_urb_state = EDGE_READ_URB_STOPPING;
2185         edge_port->shadow_mcr &= ~MCR_RTS;
2186
2187         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2188 }
2189
2190 static int restart_read(struct edgeport_port *edge_port)
2191 {
2192         struct urb *urb;
2193         int status = 0;
2194         unsigned long flags;
2195
2196         spin_lock_irqsave(&edge_port->ep_lock, flags);
2197
2198         if (edge_port->ep_read_urb_state == EDGE_READ_URB_STOPPED) {
2199                 urb = edge_port->port->read_urb;
2200                 status = usb_submit_urb(urb, GFP_ATOMIC);
2201         }
2202         edge_port->ep_read_urb_state = EDGE_READ_URB_RUNNING;
2203         edge_port->shadow_mcr |= MCR_RTS;
2204
2205         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2206
2207         return status;
2208 }
2209
2210 static void change_port_settings(struct tty_struct *tty,
2211                 struct edgeport_port *edge_port, struct ktermios *old_termios)
2212 {
2213         struct device *dev = &edge_port->port->dev;
2214         struct ump_uart_config *config;
2215         int baud;
2216         unsigned cflag;
2217         int status;
2218
2219         config = kmalloc (sizeof (*config), GFP_KERNEL);
2220         if (!config) {
2221                 tty->termios = *old_termios;
2222                 return;
2223         }
2224
2225         cflag = tty->termios.c_cflag;
2226
2227         config->wFlags = 0;
2228
2229         /* These flags must be set */
2230         config->wFlags |= UMP_MASK_UART_FLAGS_RECEIVE_MS_INT;
2231         config->wFlags |= UMP_MASK_UART_FLAGS_AUTO_START_ON_ERR;
2232         config->bUartMode = (u8)(edge_port->bUartMode);
2233
2234         switch (cflag & CSIZE) {
2235         case CS5:
2236                     config->bDataBits = UMP_UART_CHAR5BITS;
2237                     dev_dbg(dev, "%s - data bits = 5\n", __func__);
2238                     break;
2239         case CS6:
2240                     config->bDataBits = UMP_UART_CHAR6BITS;
2241                     dev_dbg(dev, "%s - data bits = 6\n", __func__);
2242                     break;
2243         case CS7:
2244                     config->bDataBits = UMP_UART_CHAR7BITS;
2245                     dev_dbg(dev, "%s - data bits = 7\n", __func__);
2246                     break;
2247         default:
2248         case CS8:
2249                     config->bDataBits = UMP_UART_CHAR8BITS;
2250                     dev_dbg(dev, "%s - data bits = 8\n", __func__);
2251                             break;
2252         }
2253
2254         if (cflag & PARENB) {
2255                 if (cflag & PARODD) {
2256                         config->wFlags |= UMP_MASK_UART_FLAGS_PARITY;
2257                         config->bParity = UMP_UART_ODDPARITY;
2258                         dev_dbg(dev, "%s - parity = odd\n", __func__);
2259                 } else {
2260                         config->wFlags |= UMP_MASK_UART_FLAGS_PARITY;
2261                         config->bParity = UMP_UART_EVENPARITY;
2262                         dev_dbg(dev, "%s - parity = even\n", __func__);
2263                 }
2264         } else {
2265                 config->bParity = UMP_UART_NOPARITY;
2266                 dev_dbg(dev, "%s - parity = none\n", __func__);
2267         }
2268
2269         if (cflag & CSTOPB) {
2270                 config->bStopBits = UMP_UART_STOPBIT2;
2271                 dev_dbg(dev, "%s - stop bits = 2\n", __func__);
2272         } else {
2273                 config->bStopBits = UMP_UART_STOPBIT1;
2274                 dev_dbg(dev, "%s - stop bits = 1\n", __func__);
2275         }
2276
2277         /* figure out the flow control settings */
2278         if (cflag & CRTSCTS) {
2279                 config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X_CTS_FLOW;
2280                 config->wFlags |= UMP_MASK_UART_FLAGS_RTS_FLOW;
2281                 dev_dbg(dev, "%s - RTS/CTS is enabled\n", __func__);
2282         } else {
2283                 dev_dbg(dev, "%s - RTS/CTS is disabled\n", __func__);
2284                 restart_read(edge_port);
2285         }
2286
2287         /*
2288          * if we are implementing XON/XOFF, set the start and stop
2289          * character in the device
2290          */
2291         config->cXon  = START_CHAR(tty);
2292         config->cXoff = STOP_CHAR(tty);
2293
2294         /* if we are implementing INBOUND XON/XOFF */
2295         if (I_IXOFF(tty)) {
2296                 config->wFlags |= UMP_MASK_UART_FLAGS_IN_X;
2297                 dev_dbg(dev, "%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n",
2298                         __func__, config->cXon, config->cXoff);
2299         } else
2300                 dev_dbg(dev, "%s - INBOUND XON/XOFF is disabled\n", __func__);
2301
2302         /* if we are implementing OUTBOUND XON/XOFF */
2303         if (I_IXON(tty)) {
2304                 config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X;
2305                 dev_dbg(dev, "%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n",
2306                         __func__, config->cXon, config->cXoff);
2307         } else
2308                 dev_dbg(dev, "%s - OUTBOUND XON/XOFF is disabled\n", __func__);
2309
2310         tty->termios.c_cflag &= ~CMSPAR;
2311
2312         /* Round the baud rate */
2313         baud = tty_get_baud_rate(tty);
2314         if (!baud) {
2315                 /* pick a default, any default... */
2316                 baud = 9600;
2317         } else {
2318                 /* Avoid a zero divisor. */
2319                 baud = min(baud, 461550);
2320                 tty_encode_baud_rate(tty, baud, baud);
2321         }
2322
2323         edge_port->baud_rate = baud;
2324         config->wBaudRate = (u16)((461550L + baud/2) / baud);
2325
2326         /* FIXME: Recompute actual baud from divisor here */
2327
2328         dev_dbg(dev, "%s - baud rate = %d, wBaudRate = %d\n", __func__, baud, config->wBaudRate);
2329
2330         dev_dbg(dev, "wBaudRate:   %d\n", (int)(461550L / config->wBaudRate));
2331         dev_dbg(dev, "wFlags:    0x%x\n", config->wFlags);
2332         dev_dbg(dev, "bDataBits:   %d\n", config->bDataBits);
2333         dev_dbg(dev, "bParity:     %d\n", config->bParity);
2334         dev_dbg(dev, "bStopBits:   %d\n", config->bStopBits);
2335         dev_dbg(dev, "cXon:        %d\n", config->cXon);
2336         dev_dbg(dev, "cXoff:       %d\n", config->cXoff);
2337         dev_dbg(dev, "bUartMode:   %d\n", config->bUartMode);
2338
2339         /* move the word values into big endian mode */
2340         cpu_to_be16s(&config->wFlags);
2341         cpu_to_be16s(&config->wBaudRate);
2342
2343         status = send_port_cmd(edge_port->port, UMPC_SET_CONFIG, 0, config,
2344                         sizeof(*config));
2345         if (status)
2346                 dev_dbg(dev, "%s - error %d when trying to write config to device\n",
2347                         __func__, status);
2348         kfree(config);
2349 }
2350
2351 static void edge_set_termios(struct tty_struct *tty,
2352                 struct usb_serial_port *port, struct ktermios *old_termios)
2353 {
2354         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2355
2356         if (edge_port == NULL)
2357                 return;
2358         /* change the port settings to the new ones specified */
2359         change_port_settings(tty, edge_port, old_termios);
2360 }
2361
2362 static int edge_tiocmset(struct tty_struct *tty,
2363                                         unsigned int set, unsigned int clear)
2364 {
2365         struct usb_serial_port *port = tty->driver_data;
2366         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2367         unsigned int mcr;
2368         unsigned long flags;
2369
2370         spin_lock_irqsave(&edge_port->ep_lock, flags);
2371         mcr = edge_port->shadow_mcr;
2372         if (set & TIOCM_RTS)
2373                 mcr |= MCR_RTS;
2374         if (set & TIOCM_DTR)
2375                 mcr |= MCR_DTR;
2376         if (set & TIOCM_LOOP)
2377                 mcr |= MCR_LOOPBACK;
2378
2379         if (clear & TIOCM_RTS)
2380                 mcr &= ~MCR_RTS;
2381         if (clear & TIOCM_DTR)
2382                 mcr &= ~MCR_DTR;
2383         if (clear & TIOCM_LOOP)
2384                 mcr &= ~MCR_LOOPBACK;
2385
2386         edge_port->shadow_mcr = mcr;
2387         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2388
2389         restore_mcr(edge_port, mcr);
2390         return 0;
2391 }
2392
2393 static int edge_tiocmget(struct tty_struct *tty)
2394 {
2395         struct usb_serial_port *port = tty->driver_data;
2396         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2397         unsigned int result = 0;
2398         unsigned int msr;
2399         unsigned int mcr;
2400         unsigned long flags;
2401
2402         spin_lock_irqsave(&edge_port->ep_lock, flags);
2403
2404         msr = edge_port->shadow_msr;
2405         mcr = edge_port->shadow_mcr;
2406         result = ((mcr & MCR_DTR)       ? TIOCM_DTR: 0)   /* 0x002 */
2407                   | ((mcr & MCR_RTS)    ? TIOCM_RTS: 0)   /* 0x004 */
2408                   | ((msr & EDGEPORT_MSR_CTS)   ? TIOCM_CTS: 0)   /* 0x020 */
2409                   | ((msr & EDGEPORT_MSR_CD)    ? TIOCM_CAR: 0)   /* 0x040 */
2410                   | ((msr & EDGEPORT_MSR_RI)    ? TIOCM_RI:  0)   /* 0x080 */
2411                   | ((msr & EDGEPORT_MSR_DSR)   ? TIOCM_DSR: 0);  /* 0x100 */
2412
2413
2414         dev_dbg(&port->dev, "%s -- %x\n", __func__, result);
2415         spin_unlock_irqrestore(&edge_port->ep_lock, flags);
2416
2417         return result;
2418 }
2419
2420 static void edge_break(struct tty_struct *tty, int break_state)
2421 {
2422         struct usb_serial_port *port = tty->driver_data;
2423         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2424         int status;
2425         int bv = 0;     /* Off */
2426
2427         if (break_state == -1)
2428                 bv = 1; /* On */
2429         status = ti_do_config(edge_port, UMPC_SET_CLR_BREAK, bv);
2430         if (status)
2431                 dev_dbg(&port->dev, "%s - error %d sending break set/clear command.\n",
2432                         __func__, status);
2433 }
2434
2435 static void edge_heartbeat_schedule(struct edgeport_serial *edge_serial)
2436 {
2437         if (!edge_serial->use_heartbeat)
2438                 return;
2439
2440         schedule_delayed_work(&edge_serial->heartbeat_work,
2441                         FW_HEARTBEAT_SECS * HZ);
2442 }
2443
2444 static void edge_heartbeat_work(struct work_struct *work)
2445 {
2446         struct edgeport_serial *serial;
2447         struct ti_i2c_desc *rom_desc;
2448
2449         serial = container_of(work, struct edgeport_serial,
2450                         heartbeat_work.work);
2451
2452         rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
2453
2454         /* Descriptor address request is enough to reset the firmware timer */
2455         if (!rom_desc || !get_descriptor_addr(serial, I2C_DESC_TYPE_ION,
2456                         rom_desc)) {
2457                 dev_err(&serial->serial->interface->dev,
2458                                 "%s - Incomplete heartbeat\n", __func__);
2459         }
2460         kfree(rom_desc);
2461
2462         edge_heartbeat_schedule(serial);
2463 }
2464
2465 static int edge_calc_num_ports(struct usb_serial *serial,
2466                                 struct usb_serial_endpoints *epds)
2467 {
2468         struct device *dev = &serial->interface->dev;
2469         unsigned char num_ports = serial->type->num_ports;
2470
2471         /* Make sure we have the required endpoints when in download mode. */
2472         if (serial->interface->cur_altsetting->desc.bNumEndpoints > 1) {
2473                 if (epds->num_bulk_in < num_ports ||
2474                                 epds->num_bulk_out < num_ports ||
2475                                 epds->num_interrupt_in < 1) {
2476                         dev_err(dev, "required endpoints missing\n");
2477                         return -ENODEV;
2478                 }
2479         }
2480
2481         return num_ports;
2482 }
2483
2484 static int edge_startup(struct usb_serial *serial)
2485 {
2486         struct edgeport_serial *edge_serial;
2487         int status;
2488         u16 product_id;
2489
2490         /* create our private serial structure */
2491         edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
2492         if (!edge_serial)
2493                 return -ENOMEM;
2494
2495         mutex_init(&edge_serial->es_lock);
2496         edge_serial->serial = serial;
2497         INIT_DELAYED_WORK(&edge_serial->heartbeat_work, edge_heartbeat_work);
2498         usb_set_serial_data(serial, edge_serial);
2499
2500         status = download_fw(edge_serial);
2501         if (status < 0) {
2502                 kfree(edge_serial);
2503                 return status;
2504         }
2505
2506         if (status > 0)
2507                 return 1;       /* bind but do not register any ports */
2508
2509         product_id = le16_to_cpu(
2510                         edge_serial->serial->dev->descriptor.idProduct);
2511
2512         /* Currently only the EP/416 models require heartbeat support */
2513         if (edge_serial->fw_version > FW_HEARTBEAT_VERSION_CUTOFF) {
2514                 if (product_id == ION_DEVICE_ID_TI_EDGEPORT_416 ||
2515                         product_id == ION_DEVICE_ID_TI_EDGEPORT_416B) {
2516                         edge_serial->use_heartbeat = true;
2517                 }
2518         }
2519
2520         edge_heartbeat_schedule(edge_serial);
2521
2522         return 0;
2523 }
2524
2525 static void edge_disconnect(struct usb_serial *serial)
2526 {
2527         struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
2528
2529         cancel_delayed_work_sync(&edge_serial->heartbeat_work);
2530 }
2531
2532 static void edge_release(struct usb_serial *serial)
2533 {
2534         struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
2535
2536         cancel_delayed_work_sync(&edge_serial->heartbeat_work);
2537         kfree(edge_serial);
2538 }
2539
2540 static int edge_port_probe(struct usb_serial_port *port)
2541 {
2542         struct edgeport_port *edge_port;
2543         int ret;
2544
2545         edge_port = kzalloc(sizeof(*edge_port), GFP_KERNEL);
2546         if (!edge_port)
2547                 return -ENOMEM;
2548
2549         spin_lock_init(&edge_port->ep_lock);
2550         edge_port->port = port;
2551         edge_port->edge_serial = usb_get_serial_data(port->serial);
2552         edge_port->bUartMode = default_uart_mode;
2553
2554         switch (port->port_number) {
2555         case 0:
2556                 edge_port->uart_base = UMPMEM_BASE_UART1;
2557                 edge_port->dma_address = UMPD_OEDB1_ADDRESS;
2558                 break;
2559         case 1:
2560                 edge_port->uart_base = UMPMEM_BASE_UART2;
2561                 edge_port->dma_address = UMPD_OEDB2_ADDRESS;
2562                 break;
2563         default:
2564                 dev_err(&port->dev, "unknown port number\n");
2565                 ret = -ENODEV;
2566                 goto err;
2567         }
2568
2569         dev_dbg(&port->dev,
2570                 "%s - port_number = %d, uart_base = %04x, dma_address = %04x\n",
2571                 __func__, port->port_number, edge_port->uart_base,
2572                 edge_port->dma_address);
2573
2574         usb_set_serial_port_data(port, edge_port);
2575
2576         ret = edge_create_sysfs_attrs(port);
2577         if (ret)
2578                 goto err;
2579
2580         /*
2581          * The LSR does not tell when the transmitter shift register has
2582          * emptied so add a one-character drain delay.
2583          */
2584         port->port.drain_delay = 1;
2585
2586         return 0;
2587 err:
2588         kfree(edge_port);
2589
2590         return ret;
2591 }
2592
2593 static void edge_port_remove(struct usb_serial_port *port)
2594 {
2595         struct edgeport_port *edge_port;
2596
2597         edge_port = usb_get_serial_port_data(port);
2598         edge_remove_sysfs_attrs(port);
2599         kfree(edge_port);
2600 }
2601
2602 /* Sysfs Attributes */
2603
2604 static ssize_t uart_mode_show(struct device *dev,
2605         struct device_attribute *attr, char *buf)
2606 {
2607         struct usb_serial_port *port = to_usb_serial_port(dev);
2608         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2609
2610         return sprintf(buf, "%d\n", edge_port->bUartMode);
2611 }
2612
2613 static ssize_t uart_mode_store(struct device *dev,
2614         struct device_attribute *attr, const char *valbuf, size_t count)
2615 {
2616         struct usb_serial_port *port = to_usb_serial_port(dev);
2617         struct edgeport_port *edge_port = usb_get_serial_port_data(port);
2618         unsigned int v = simple_strtoul(valbuf, NULL, 0);
2619
2620         dev_dbg(dev, "%s: setting uart_mode = %d\n", __func__, v);
2621
2622         if (v < 256)
2623                 edge_port->bUartMode = v;
2624         else
2625                 dev_err(dev, "%s - uart_mode %d is invalid\n", __func__, v);
2626
2627         return count;
2628 }
2629 static DEVICE_ATTR_RW(uart_mode);
2630
2631 static int edge_create_sysfs_attrs(struct usb_serial_port *port)
2632 {
2633         return device_create_file(&port->dev, &dev_attr_uart_mode);
2634 }
2635
2636 static int edge_remove_sysfs_attrs(struct usb_serial_port *port)
2637 {
2638         device_remove_file(&port->dev, &dev_attr_uart_mode);
2639         return 0;
2640 }
2641
2642 #ifdef CONFIG_PM
2643 static int edge_suspend(struct usb_serial *serial, pm_message_t message)
2644 {
2645         struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
2646
2647         cancel_delayed_work_sync(&edge_serial->heartbeat_work);
2648
2649         return 0;
2650 }
2651
2652 static int edge_resume(struct usb_serial *serial)
2653 {
2654         struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
2655
2656         edge_heartbeat_schedule(edge_serial);
2657
2658         return 0;
2659 }
2660 #endif
2661
2662 static struct usb_serial_driver edgeport_1port_device = {
2663         .driver = {
2664                 .owner          = THIS_MODULE,
2665                 .name           = "edgeport_ti_1",
2666         },
2667         .description            = "Edgeport TI 1 port adapter",
2668         .id_table               = edgeport_1port_id_table,
2669         .num_ports              = 1,
2670         .num_bulk_out           = 1,
2671         .open                   = edge_open,
2672         .close                  = edge_close,
2673         .throttle               = edge_throttle,
2674         .unthrottle             = edge_unthrottle,
2675         .attach                 = edge_startup,
2676         .calc_num_ports         = edge_calc_num_ports,
2677         .disconnect             = edge_disconnect,
2678         .release                = edge_release,
2679         .port_probe             = edge_port_probe,
2680         .port_remove            = edge_port_remove,
2681         .set_termios            = edge_set_termios,
2682         .tiocmget               = edge_tiocmget,
2683         .tiocmset               = edge_tiocmset,
2684         .tiocmiwait             = usb_serial_generic_tiocmiwait,
2685         .get_icount             = usb_serial_generic_get_icount,
2686         .write                  = edge_write,
2687         .write_room             = edge_write_room,
2688         .chars_in_buffer        = edge_chars_in_buffer,
2689         .tx_empty               = edge_tx_empty,
2690         .break_ctl              = edge_break,
2691         .read_int_callback      = edge_interrupt_callback,
2692         .read_bulk_callback     = edge_bulk_in_callback,
2693         .write_bulk_callback    = edge_bulk_out_callback,
2694 #ifdef CONFIG_PM
2695         .suspend                = edge_suspend,
2696         .resume                 = edge_resume,
2697 #endif
2698 };
2699
2700 static struct usb_serial_driver edgeport_2port_device = {
2701         .driver = {
2702                 .owner          = THIS_MODULE,
2703                 .name           = "edgeport_ti_2",
2704         },
2705         .description            = "Edgeport TI 2 port adapter",
2706         .id_table               = edgeport_2port_id_table,
2707         .num_ports              = 2,
2708         .num_bulk_out           = 1,
2709         .open                   = edge_open,
2710         .close                  = edge_close,
2711         .throttle               = edge_throttle,
2712         .unthrottle             = edge_unthrottle,
2713         .attach                 = edge_startup,
2714         .calc_num_ports         = edge_calc_num_ports,
2715         .disconnect             = edge_disconnect,
2716         .release                = edge_release,
2717         .port_probe             = edge_port_probe,
2718         .port_remove            = edge_port_remove,
2719         .set_termios            = edge_set_termios,
2720         .tiocmget               = edge_tiocmget,
2721         .tiocmset               = edge_tiocmset,
2722         .tiocmiwait             = usb_serial_generic_tiocmiwait,
2723         .get_icount             = usb_serial_generic_get_icount,
2724         .write                  = edge_write,
2725         .write_room             = edge_write_room,
2726         .chars_in_buffer        = edge_chars_in_buffer,
2727         .tx_empty               = edge_tx_empty,
2728         .break_ctl              = edge_break,
2729         .read_int_callback      = edge_interrupt_callback,
2730         .read_bulk_callback     = edge_bulk_in_callback,
2731         .write_bulk_callback    = edge_bulk_out_callback,
2732 #ifdef CONFIG_PM
2733         .suspend                = edge_suspend,
2734         .resume                 = edge_resume,
2735 #endif
2736 };
2737
2738 static struct usb_serial_driver * const serial_drivers[] = {
2739         &edgeport_1port_device, &edgeport_2port_device, NULL
2740 };
2741
2742 module_usb_serial_driver(serial_drivers, id_table_combined);
2743
2744 MODULE_AUTHOR(DRIVER_AUTHOR);
2745 MODULE_DESCRIPTION(DRIVER_DESC);
2746 MODULE_LICENSE("GPL");
2747 MODULE_FIRMWARE("edgeport/down3.bin");
2748
2749 module_param(ignore_cpu_rev, bool, 0644);
2750 MODULE_PARM_DESC(ignore_cpu_rev,
2751                         "Ignore the cpu revision when connecting to a device");
2752
2753 module_param(default_uart_mode, int, 0644);
2754 MODULE_PARM_DESC(default_uart_mode, "Default uart_mode, 0=RS232, ...");