2 * Definitions for the FTDI USB Single Port Serial Converter -
3 * known as FTDI_SIO (Serial Input/Output application of the chipset)
5 * The example I have is known as the USC-1000 which is available from
6 * http://www.dse.co.nz - cat no XH4214 It looks similar to this:
7 * http://www.dansdata.com/usbser.htm but I can't be sure There are other
8 * USC-1000s which don't look like my device though so beware!
10 * The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side,
13 * Thanx to FTDI (http://www.ftdichip.com) for so kindly providing details
14 * of the protocol required to talk to the device and ongoing assistence
17 * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the
18 * FTDI_SIO implementation.
20 * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais
25 #define FTDI_VID 0x0403 /* Vendor Id */
26 #define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */
27 #define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */
28 #define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
29 #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
30 #define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */
31 #define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
32 #define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */
33 #define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */
34 #define FTDI_NF_RIC_PID 0x0001 /* Product Id */
35 #define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 */
37 /* Larsen and Brusgaard AltiTrack/USBtrack */
38 #define LARSENBRUSGAARD_VID 0x0FD8
39 #define LB_ALTITRACK_PID 0x0001
41 /* www.canusb.com Lawicel CANUSB device */
42 #define FTDI_CANUSB_PID 0xFFA8 /* Product Id */
44 /* AlphaMicro Components AMC-232USB01 device */
45 #define FTDI_AMC232_PID 0xFF00 /* Product Id */
47 /* www.candapter.com Ewert Energy Systems CANdapter device */
48 #define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
50 /* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
51 /* the VID is the standard ftdi vid (FTDI_VID) */
52 #define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */
53 #define FTDI_SCS_DEVICE_1_PID 0xD011 /* SCS Tracker / DSP TNC */
54 #define FTDI_SCS_DEVICE_2_PID 0xD012
55 #define FTDI_SCS_DEVICE_3_PID 0xD013
56 #define FTDI_SCS_DEVICE_4_PID 0xD014
57 #define FTDI_SCS_DEVICE_5_PID 0xD015
58 #define FTDI_SCS_DEVICE_6_PID 0xD016
59 #define FTDI_SCS_DEVICE_7_PID 0xD017
61 /* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */
62 #define FTDI_ACTZWAVE_PID 0xF2D0
65 /* www.starting-point-systems.com µChameleon device */
66 #define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */
68 /* www.irtrans.de device */
69 #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
72 /* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */
73 #define FTDI_TTUSB_PID 0xFF20 /* Product Id */
76 #define FTDI_IPLUS_PID 0xD070 /* Product Id */
77 #define FTDI_IPLUS2_PID 0xD071 /* Product Id */
79 /* DMX4ALL DMX Interfaces */
80 #define FTDI_DMX4ALL 0xC850
82 /* OpenDCC (www.opendcc.de) product id */
83 #define FTDI_OPENDCC_PID 0xBFD8
84 #define FTDI_OPENDCC_SNIFFER_PID 0xBFD9
85 #define FTDI_OPENDCC_THROTTLE_PID 0xBFDA
86 #define FTDI_OPENDCC_GATEWAY_PID 0xBFDB
88 /* Sprog II (Andrew Crosland's SprogII DCC interface) */
89 #define FTDI_SPROG_II 0xF0C8
91 /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
92 /* they use the ftdi chipset for the USB interface and the vendor id is the same */
93 #define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */
94 #define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */
95 #define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */
96 #define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */
97 #define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */
98 #define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */
99 #define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */
100 #define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */
102 /* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */
103 /* broadband internet service. The following PID is exhibited by the usb device supplied */
104 /* (the VID is the standard ftdi vid (FTDI_VID) */
105 #define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */
108 * PCDJ use ftdi based dj-controllers. The following PID is for their DAC-2 device
109 * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen)
110 * (the VID is the standard ftdi vid (FTDI_VID) */
111 #define FTDI_PCDJ_DAC2_PID 0xFA88
114 * The following are the values for the Matrix Orbital LCD displays,
115 * which are the FT232BM ( similar to the 8U232AM )
117 #define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */
118 #define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */
119 #define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */
120 #define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */
121 #define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */
122 #define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */
123 #define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */
125 /* OOCDlink by Joern Kaipf <joernk@web.de>
126 * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
127 #define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */
130 * The following are the values for the Matrix Orbital FTDI Range
131 * Anything in this range will use an FT232RL.
133 #define MTXORB_VID 0x1B3D
134 #define MTXORB_FTDI_RANGE_0100_PID 0x0100
135 #define MTXORB_FTDI_RANGE_0101_PID 0x0101
136 #define MTXORB_FTDI_RANGE_0102_PID 0x0102
137 #define MTXORB_FTDI_RANGE_0103_PID 0x0103
138 #define MTXORB_FTDI_RANGE_0104_PID 0x0104
139 #define MTXORB_FTDI_RANGE_0105_PID 0x0105
140 #define MTXORB_FTDI_RANGE_0106_PID 0x0106
141 #define MTXORB_FTDI_RANGE_0107_PID 0x0107
142 #define MTXORB_FTDI_RANGE_0108_PID 0x0108
143 #define MTXORB_FTDI_RANGE_0109_PID 0x0109
144 #define MTXORB_FTDI_RANGE_010A_PID 0x010A
145 #define MTXORB_FTDI_RANGE_010B_PID 0x010B
146 #define MTXORB_FTDI_RANGE_010C_PID 0x010C
147 #define MTXORB_FTDI_RANGE_010D_PID 0x010D
148 #define MTXORB_FTDI_RANGE_010E_PID 0x010E
149 #define MTXORB_FTDI_RANGE_010F_PID 0x010F
150 #define MTXORB_FTDI_RANGE_0110_PID 0x0110
151 #define MTXORB_FTDI_RANGE_0111_PID 0x0111
152 #define MTXORB_FTDI_RANGE_0112_PID 0x0112
153 #define MTXORB_FTDI_RANGE_0113_PID 0x0113
154 #define MTXORB_FTDI_RANGE_0114_PID 0x0114
155 #define MTXORB_FTDI_RANGE_0115_PID 0x0115
156 #define MTXORB_FTDI_RANGE_0116_PID 0x0116
157 #define MTXORB_FTDI_RANGE_0117_PID 0x0117
158 #define MTXORB_FTDI_RANGE_0118_PID 0x0118
159 #define MTXORB_FTDI_RANGE_0119_PID 0x0119
160 #define MTXORB_FTDI_RANGE_011A_PID 0x011A
161 #define MTXORB_FTDI_RANGE_011B_PID 0x011B
162 #define MTXORB_FTDI_RANGE_011C_PID 0x011C
163 #define MTXORB_FTDI_RANGE_011D_PID 0x011D
164 #define MTXORB_FTDI_RANGE_011E_PID 0x011E
165 #define MTXORB_FTDI_RANGE_011F_PID 0x011F
166 #define MTXORB_FTDI_RANGE_0120_PID 0x0120
167 #define MTXORB_FTDI_RANGE_0121_PID 0x0121
168 #define MTXORB_FTDI_RANGE_0122_PID 0x0122
169 #define MTXORB_FTDI_RANGE_0123_PID 0x0123
170 #define MTXORB_FTDI_RANGE_0124_PID 0x0124
171 #define MTXORB_FTDI_RANGE_0125_PID 0x0125
172 #define MTXORB_FTDI_RANGE_0126_PID 0x0126
173 #define MTXORB_FTDI_RANGE_0127_PID 0x0127
174 #define MTXORB_FTDI_RANGE_0128_PID 0x0128
175 #define MTXORB_FTDI_RANGE_0129_PID 0x0129
176 #define MTXORB_FTDI_RANGE_012A_PID 0x012A
177 #define MTXORB_FTDI_RANGE_012B_PID 0x012B
178 #define MTXORB_FTDI_RANGE_012C_PID 0x012C
179 #define MTXORB_FTDI_RANGE_012D_PID 0x012D
180 #define MTXORB_FTDI_RANGE_012E_PID 0x012E
181 #define MTXORB_FTDI_RANGE_012F_PID 0x012F
182 #define MTXORB_FTDI_RANGE_0130_PID 0x0130
183 #define MTXORB_FTDI_RANGE_0131_PID 0x0131
184 #define MTXORB_FTDI_RANGE_0132_PID 0x0132
185 #define MTXORB_FTDI_RANGE_0133_PID 0x0133
186 #define MTXORB_FTDI_RANGE_0134_PID 0x0134
187 #define MTXORB_FTDI_RANGE_0135_PID 0x0135
188 #define MTXORB_FTDI_RANGE_0136_PID 0x0136
189 #define MTXORB_FTDI_RANGE_0137_PID 0x0137
190 #define MTXORB_FTDI_RANGE_0138_PID 0x0138
191 #define MTXORB_FTDI_RANGE_0139_PID 0x0139
192 #define MTXORB_FTDI_RANGE_013A_PID 0x013A
193 #define MTXORB_FTDI_RANGE_013B_PID 0x013B
194 #define MTXORB_FTDI_RANGE_013C_PID 0x013C
195 #define MTXORB_FTDI_RANGE_013D_PID 0x013D
196 #define MTXORB_FTDI_RANGE_013E_PID 0x013E
197 #define MTXORB_FTDI_RANGE_013F_PID 0x013F
198 #define MTXORB_FTDI_RANGE_0140_PID 0x0140
199 #define MTXORB_FTDI_RANGE_0141_PID 0x0141
200 #define MTXORB_FTDI_RANGE_0142_PID 0x0142
201 #define MTXORB_FTDI_RANGE_0143_PID 0x0143
202 #define MTXORB_FTDI_RANGE_0144_PID 0x0144
203 #define MTXORB_FTDI_RANGE_0145_PID 0x0145
204 #define MTXORB_FTDI_RANGE_0146_PID 0x0146
205 #define MTXORB_FTDI_RANGE_0147_PID 0x0147
206 #define MTXORB_FTDI_RANGE_0148_PID 0x0148
207 #define MTXORB_FTDI_RANGE_0149_PID 0x0149
208 #define MTXORB_FTDI_RANGE_014A_PID 0x014A
209 #define MTXORB_FTDI_RANGE_014B_PID 0x014B
210 #define MTXORB_FTDI_RANGE_014C_PID 0x014C
211 #define MTXORB_FTDI_RANGE_014D_PID 0x014D
212 #define MTXORB_FTDI_RANGE_014E_PID 0x014E
213 #define MTXORB_FTDI_RANGE_014F_PID 0x014F
214 #define MTXORB_FTDI_RANGE_0150_PID 0x0150
215 #define MTXORB_FTDI_RANGE_0151_PID 0x0151
216 #define MTXORB_FTDI_RANGE_0152_PID 0x0152
217 #define MTXORB_FTDI_RANGE_0153_PID 0x0153
218 #define MTXORB_FTDI_RANGE_0154_PID 0x0154
219 #define MTXORB_FTDI_RANGE_0155_PID 0x0155
220 #define MTXORB_FTDI_RANGE_0156_PID 0x0156
221 #define MTXORB_FTDI_RANGE_0157_PID 0x0157
222 #define MTXORB_FTDI_RANGE_0158_PID 0x0158
223 #define MTXORB_FTDI_RANGE_0159_PID 0x0159
224 #define MTXORB_FTDI_RANGE_015A_PID 0x015A
225 #define MTXORB_FTDI_RANGE_015B_PID 0x015B
226 #define MTXORB_FTDI_RANGE_015C_PID 0x015C
227 #define MTXORB_FTDI_RANGE_015D_PID 0x015D
228 #define MTXORB_FTDI_RANGE_015E_PID 0x015E
229 #define MTXORB_FTDI_RANGE_015F_PID 0x015F
230 #define MTXORB_FTDI_RANGE_0160_PID 0x0160
231 #define MTXORB_FTDI_RANGE_0161_PID 0x0161
232 #define MTXORB_FTDI_RANGE_0162_PID 0x0162
233 #define MTXORB_FTDI_RANGE_0163_PID 0x0163
234 #define MTXORB_FTDI_RANGE_0164_PID 0x0164
235 #define MTXORB_FTDI_RANGE_0165_PID 0x0165
236 #define MTXORB_FTDI_RANGE_0166_PID 0x0166
237 #define MTXORB_FTDI_RANGE_0167_PID 0x0167
238 #define MTXORB_FTDI_RANGE_0168_PID 0x0168
239 #define MTXORB_FTDI_RANGE_0169_PID 0x0169
240 #define MTXORB_FTDI_RANGE_016A_PID 0x016A
241 #define MTXORB_FTDI_RANGE_016B_PID 0x016B
242 #define MTXORB_FTDI_RANGE_016C_PID 0x016C
243 #define MTXORB_FTDI_RANGE_016D_PID 0x016D
244 #define MTXORB_FTDI_RANGE_016E_PID 0x016E
245 #define MTXORB_FTDI_RANGE_016F_PID 0x016F
246 #define MTXORB_FTDI_RANGE_0170_PID 0x0170
247 #define MTXORB_FTDI_RANGE_0171_PID 0x0171
248 #define MTXORB_FTDI_RANGE_0172_PID 0x0172
249 #define MTXORB_FTDI_RANGE_0173_PID 0x0173
250 #define MTXORB_FTDI_RANGE_0174_PID 0x0174
251 #define MTXORB_FTDI_RANGE_0175_PID 0x0175
252 #define MTXORB_FTDI_RANGE_0176_PID 0x0176
253 #define MTXORB_FTDI_RANGE_0177_PID 0x0177
254 #define MTXORB_FTDI_RANGE_0178_PID 0x0178
255 #define MTXORB_FTDI_RANGE_0179_PID 0x0179
256 #define MTXORB_FTDI_RANGE_017A_PID 0x017A
257 #define MTXORB_FTDI_RANGE_017B_PID 0x017B
258 #define MTXORB_FTDI_RANGE_017C_PID 0x017C
259 #define MTXORB_FTDI_RANGE_017D_PID 0x017D
260 #define MTXORB_FTDI_RANGE_017E_PID 0x017E
261 #define MTXORB_FTDI_RANGE_017F_PID 0x017F
262 #define MTXORB_FTDI_RANGE_0180_PID 0x0180
263 #define MTXORB_FTDI_RANGE_0181_PID 0x0181
264 #define MTXORB_FTDI_RANGE_0182_PID 0x0182
265 #define MTXORB_FTDI_RANGE_0183_PID 0x0183
266 #define MTXORB_FTDI_RANGE_0184_PID 0x0184
267 #define MTXORB_FTDI_RANGE_0185_PID 0x0185
268 #define MTXORB_FTDI_RANGE_0186_PID 0x0186
269 #define MTXORB_FTDI_RANGE_0187_PID 0x0187
270 #define MTXORB_FTDI_RANGE_0188_PID 0x0188
271 #define MTXORB_FTDI_RANGE_0189_PID 0x0189
272 #define MTXORB_FTDI_RANGE_018A_PID 0x018A
273 #define MTXORB_FTDI_RANGE_018B_PID 0x018B
274 #define MTXORB_FTDI_RANGE_018C_PID 0x018C
275 #define MTXORB_FTDI_RANGE_018D_PID 0x018D
276 #define MTXORB_FTDI_RANGE_018E_PID 0x018E
277 #define MTXORB_FTDI_RANGE_018F_PID 0x018F
278 #define MTXORB_FTDI_RANGE_0190_PID 0x0190
279 #define MTXORB_FTDI_RANGE_0191_PID 0x0191
280 #define MTXORB_FTDI_RANGE_0192_PID 0x0192
281 #define MTXORB_FTDI_RANGE_0193_PID 0x0193
282 #define MTXORB_FTDI_RANGE_0194_PID 0x0194
283 #define MTXORB_FTDI_RANGE_0195_PID 0x0195
284 #define MTXORB_FTDI_RANGE_0196_PID 0x0196
285 #define MTXORB_FTDI_RANGE_0197_PID 0x0197
286 #define MTXORB_FTDI_RANGE_0198_PID 0x0198
287 #define MTXORB_FTDI_RANGE_0199_PID 0x0199
288 #define MTXORB_FTDI_RANGE_019A_PID 0x019A
289 #define MTXORB_FTDI_RANGE_019B_PID 0x019B
290 #define MTXORB_FTDI_RANGE_019C_PID 0x019C
291 #define MTXORB_FTDI_RANGE_019D_PID 0x019D
292 #define MTXORB_FTDI_RANGE_019E_PID 0x019E
293 #define MTXORB_FTDI_RANGE_019F_PID 0x019F
294 #define MTXORB_FTDI_RANGE_01A0_PID 0x01A0
295 #define MTXORB_FTDI_RANGE_01A1_PID 0x01A1
296 #define MTXORB_FTDI_RANGE_01A2_PID 0x01A2
297 #define MTXORB_FTDI_RANGE_01A3_PID 0x01A3
298 #define MTXORB_FTDI_RANGE_01A4_PID 0x01A4
299 #define MTXORB_FTDI_RANGE_01A5_PID 0x01A5
300 #define MTXORB_FTDI_RANGE_01A6_PID 0x01A6
301 #define MTXORB_FTDI_RANGE_01A7_PID 0x01A7
302 #define MTXORB_FTDI_RANGE_01A8_PID 0x01A8
303 #define MTXORB_FTDI_RANGE_01A9_PID 0x01A9
304 #define MTXORB_FTDI_RANGE_01AA_PID 0x01AA
305 #define MTXORB_FTDI_RANGE_01AB_PID 0x01AB
306 #define MTXORB_FTDI_RANGE_01AC_PID 0x01AC
307 #define MTXORB_FTDI_RANGE_01AD_PID 0x01AD
308 #define MTXORB_FTDI_RANGE_01AE_PID 0x01AE
309 #define MTXORB_FTDI_RANGE_01AF_PID 0x01AF
310 #define MTXORB_FTDI_RANGE_01B0_PID 0x01B0
311 #define MTXORB_FTDI_RANGE_01B1_PID 0x01B1
312 #define MTXORB_FTDI_RANGE_01B2_PID 0x01B2
313 #define MTXORB_FTDI_RANGE_01B3_PID 0x01B3
314 #define MTXORB_FTDI_RANGE_01B4_PID 0x01B4
315 #define MTXORB_FTDI_RANGE_01B5_PID 0x01B5
316 #define MTXORB_FTDI_RANGE_01B6_PID 0x01B6
317 #define MTXORB_FTDI_RANGE_01B7_PID 0x01B7
318 #define MTXORB_FTDI_RANGE_01B8_PID 0x01B8
319 #define MTXORB_FTDI_RANGE_01B9_PID 0x01B9
320 #define MTXORB_FTDI_RANGE_01BA_PID 0x01BA
321 #define MTXORB_FTDI_RANGE_01BB_PID 0x01BB
322 #define MTXORB_FTDI_RANGE_01BC_PID 0x01BC
323 #define MTXORB_FTDI_RANGE_01BD_PID 0x01BD
324 #define MTXORB_FTDI_RANGE_01BE_PID 0x01BE
325 #define MTXORB_FTDI_RANGE_01BF_PID 0x01BF
326 #define MTXORB_FTDI_RANGE_01C0_PID 0x01C0
327 #define MTXORB_FTDI_RANGE_01C1_PID 0x01C1
328 #define MTXORB_FTDI_RANGE_01C2_PID 0x01C2
329 #define MTXORB_FTDI_RANGE_01C3_PID 0x01C3
330 #define MTXORB_FTDI_RANGE_01C4_PID 0x01C4
331 #define MTXORB_FTDI_RANGE_01C5_PID 0x01C5
332 #define MTXORB_FTDI_RANGE_01C6_PID 0x01C6
333 #define MTXORB_FTDI_RANGE_01C7_PID 0x01C7
334 #define MTXORB_FTDI_RANGE_01C8_PID 0x01C8
335 #define MTXORB_FTDI_RANGE_01C9_PID 0x01C9
336 #define MTXORB_FTDI_RANGE_01CA_PID 0x01CA
337 #define MTXORB_FTDI_RANGE_01CB_PID 0x01CB
338 #define MTXORB_FTDI_RANGE_01CC_PID 0x01CC
339 #define MTXORB_FTDI_RANGE_01CD_PID 0x01CD
340 #define MTXORB_FTDI_RANGE_01CE_PID 0x01CE
341 #define MTXORB_FTDI_RANGE_01CF_PID 0x01CF
342 #define MTXORB_FTDI_RANGE_01D0_PID 0x01D0
343 #define MTXORB_FTDI_RANGE_01D1_PID 0x01D1
344 #define MTXORB_FTDI_RANGE_01D2_PID 0x01D2
345 #define MTXORB_FTDI_RANGE_01D3_PID 0x01D3
346 #define MTXORB_FTDI_RANGE_01D4_PID 0x01D4
347 #define MTXORB_FTDI_RANGE_01D5_PID 0x01D5
348 #define MTXORB_FTDI_RANGE_01D6_PID 0x01D6
349 #define MTXORB_FTDI_RANGE_01D7_PID 0x01D7
350 #define MTXORB_FTDI_RANGE_01D8_PID 0x01D8
351 #define MTXORB_FTDI_RANGE_01D9_PID 0x01D9
352 #define MTXORB_FTDI_RANGE_01DA_PID 0x01DA
353 #define MTXORB_FTDI_RANGE_01DB_PID 0x01DB
354 #define MTXORB_FTDI_RANGE_01DC_PID 0x01DC
355 #define MTXORB_FTDI_RANGE_01DD_PID 0x01DD
356 #define MTXORB_FTDI_RANGE_01DE_PID 0x01DE
357 #define MTXORB_FTDI_RANGE_01DF_PID 0x01DF
358 #define MTXORB_FTDI_RANGE_01E0_PID 0x01E0
359 #define MTXORB_FTDI_RANGE_01E1_PID 0x01E1
360 #define MTXORB_FTDI_RANGE_01E2_PID 0x01E2
361 #define MTXORB_FTDI_RANGE_01E3_PID 0x01E3
362 #define MTXORB_FTDI_RANGE_01E4_PID 0x01E4
363 #define MTXORB_FTDI_RANGE_01E5_PID 0x01E5
364 #define MTXORB_FTDI_RANGE_01E6_PID 0x01E6
365 #define MTXORB_FTDI_RANGE_01E7_PID 0x01E7
366 #define MTXORB_FTDI_RANGE_01E8_PID 0x01E8
367 #define MTXORB_FTDI_RANGE_01E9_PID 0x01E9
368 #define MTXORB_FTDI_RANGE_01EA_PID 0x01EA
369 #define MTXORB_FTDI_RANGE_01EB_PID 0x01EB
370 #define MTXORB_FTDI_RANGE_01EC_PID 0x01EC
371 #define MTXORB_FTDI_RANGE_01ED_PID 0x01ED
372 #define MTXORB_FTDI_RANGE_01EE_PID 0x01EE
373 #define MTXORB_FTDI_RANGE_01EF_PID 0x01EF
374 #define MTXORB_FTDI_RANGE_01F0_PID 0x01F0
375 #define MTXORB_FTDI_RANGE_01F1_PID 0x01F1
376 #define MTXORB_FTDI_RANGE_01F2_PID 0x01F2
377 #define MTXORB_FTDI_RANGE_01F3_PID 0x01F3
378 #define MTXORB_FTDI_RANGE_01F4_PID 0x01F4
379 #define MTXORB_FTDI_RANGE_01F5_PID 0x01F5
380 #define MTXORB_FTDI_RANGE_01F6_PID 0x01F6
381 #define MTXORB_FTDI_RANGE_01F7_PID 0x01F7
382 #define MTXORB_FTDI_RANGE_01F8_PID 0x01F8
383 #define MTXORB_FTDI_RANGE_01F9_PID 0x01F9
384 #define MTXORB_FTDI_RANGE_01FA_PID 0x01FA
385 #define MTXORB_FTDI_RANGE_01FB_PID 0x01FB
386 #define MTXORB_FTDI_RANGE_01FC_PID 0x01FC
387 #define MTXORB_FTDI_RANGE_01FD_PID 0x01FD
388 #define MTXORB_FTDI_RANGE_01FE_PID 0x01FE
389 #define MTXORB_FTDI_RANGE_01FF_PID 0x01FF
393 /* Interbiometrics USB I/O Board */
394 /* Developed for Interbiometrics by Rudolf Gugler */
395 #define INTERBIOMETRICS_VID 0x1209
396 #define INTERBIOMETRICS_IOBOARD_PID 0x1002
397 #define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006
400 * The following are the values for the Perle Systems
401 * UltraPort USB serial converters
403 #define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */
406 * The following are the values for the Sealevel SeaLINK+ adapters.
407 * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and
408 * removed some PIDs that don't seem to match any existing products.)
410 #define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */
411 #define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */
412 #define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */
413 #define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */
414 #define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */
415 #define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */
416 #define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */
417 #define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */
418 #define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */
419 #define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */
420 #define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */
421 #define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */
422 #define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */
423 #define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */
424 #define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */
425 #define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */
426 #define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */
427 #define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */
428 #define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */
429 #define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */
430 #define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */
431 #define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */
432 #define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */
433 #define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */
434 #define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */
435 #define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */
436 #define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */
437 #define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */
438 #define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */
439 #define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */
440 #define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */
441 #define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */
442 #define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */
443 #define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */
444 #define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */
445 #define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */
446 #define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */
447 #define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */
448 #define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */
449 #define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */
450 #define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */
451 #define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */
452 #define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */
453 #define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */
454 #define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */
455 #define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */
456 #define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */
457 #define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */
460 * The following are the values for two KOBIL chipcard terminals.
462 #define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */
463 #define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */
464 #define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */
467 * Icom ID-1 digital transceiver
470 #define ICOM_ID1_VID 0x0C26
471 #define ICOM_ID1_PID 0x0004
476 #define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */
479 * FTDI USB UART chips used in construction projects from the
480 * Elektor Electronics magazine (http://elektor-electronics.co.uk)
482 #define ELEKTOR_VID 0x0C7D
483 #define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */
486 * DSS-20 Sync Station for Sony Ericsson P800
488 #define FTDI_DSS20_PID 0xFC82
491 * Home Electronics (www.home-electro.com) USB gadgets
493 #define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */
495 /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
496 /* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
497 #define FTDI_USB_UIRT_PID 0xF850 /* Product Id */
499 /* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */
501 #define FTDI_TNC_X_PID 0xEBE0
504 * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
505 * All of these devices use FTDI's vendor ID (0x0403).
507 * The previously included PID for the UO 100 module was incorrect.
508 * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
510 * Armin Laeuger originally sent the PID for the UM 100 module.
512 #define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG */
513 #define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */
514 #define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */
515 #define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */
516 #define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */
517 /* Additional ELV PIDs that default to using the FTDI D2XX drivers on
518 * MS Windows, rather than the FTDI Virtual Com Port drivers.
519 * Maybe these will be easier to use with the libftdi/libusb user-space
520 * drivers, or possibly the Comedi drivers in some cases. */
521 #define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */
522 #define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */
523 #define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */
524 #define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */
525 #define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */
526 #define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */
527 #define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */
528 #define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */
529 #define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */
530 #define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */
531 #define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */
532 #define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */
533 #define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */
534 #define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
535 #define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */
536 #define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */
537 #define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */
538 #define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */
539 #define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */
540 #define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */
541 #define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */
542 #define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */
543 #define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */
546 * Definitions for ID TECH (www.idt-net.com) devices
548 #define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */
549 #define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */
552 * Definitions for Omnidirectional Control Technology, Inc. devices
554 #define OCT_VID 0x0B39 /* OCT vendor ID */
555 /* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */
556 /* Also rebadged as Dick Smith Electronics (Aus) XH6451 */
557 /* Also rebadged as SIIG Inc. model US2308 hardware version 1 */
558 #define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */
560 /* an infrared receiver for user access control with IR tags */
561 #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */
564 * Definitions for Artemis astronomical USB based cameras
565 * Check it at http://www.artemisccd.co.uk/
567 #define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */
570 * Definitions for ATIK Instruments astronomical USB based cameras
571 * Check it at http://www.atik-instruments.com/
573 #define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */
574 #define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */
575 #define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */
576 #define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */
577 #define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */
580 * Protego product ids
582 #define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */
583 #define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */
584 #define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */
585 #define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */
588 * Gude Analog- und Digitalsysteme GmbH
590 #define FTDI_GUDEADS_E808_PID 0xE808
591 #define FTDI_GUDEADS_E809_PID 0xE809
592 #define FTDI_GUDEADS_E80A_PID 0xE80A
593 #define FTDI_GUDEADS_E80B_PID 0xE80B
594 #define FTDI_GUDEADS_E80C_PID 0xE80C
595 #define FTDI_GUDEADS_E80D_PID 0xE80D
596 #define FTDI_GUDEADS_E80E_PID 0xE80E
597 #define FTDI_GUDEADS_E80F_PID 0xE80F
598 #define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */
599 #define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */
600 #define FTDI_GUDEADS_E88A_PID 0xE88A
601 #define FTDI_GUDEADS_E88B_PID 0xE88B
602 #define FTDI_GUDEADS_E88C_PID 0xE88C
603 #define FTDI_GUDEADS_E88D_PID 0xE88D
604 #define FTDI_GUDEADS_E88E_PID 0xE88E
605 #define FTDI_GUDEADS_E88F_PID 0xE88F
608 * Linx Technologies product ids
610 #define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */
611 #define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */
612 #define LINX_FUTURE_0_PID 0xF44A /* Linx future device */
613 #define LINX_FUTURE_1_PID 0xF44B /* Linx future device */
614 #define LINX_FUTURE_2_PID 0xF44C /* Linx future device */
616 /* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */
617 /* unit for PIC16's/PIC18's */
618 #define FTDI_CCSICDU20_0_PID 0xF9D0
619 #define FTDI_CCSICDU40_1_PID 0xF9D1
620 #define FTDI_CCSMACHX_2_PID 0xF9D2
621 #define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3
622 #define FTDI_CCSICDU64_4_PID 0xF9D4
623 #define FTDI_CCSPRIME8_5_PID 0xF9D5
625 /* Inside Accesso contactless reader (http://www.insidefr.com) */
626 #define INSIDE_ACCESSO 0xFAD0
629 * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI
631 #define INTREPID_VID 0x093C
632 #define INTREPID_VALUECAN_PID 0x0601
633 #define INTREPID_NEOVI_PID 0x0701
636 * Falcom Wireless Communications GmbH
638 #define FALCOM_VID 0x0F94 /* Vendor Id */
639 #define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */
640 #define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */
645 #define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */
648 * Oceanic product ids
650 #define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */
653 * TTi (Thurlby Thandar Instruments)
655 #define TTI_VID 0x103E /* Vendor Id */
656 #define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */
659 * Definitions for B&B Electronics products.
661 #define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */
662 #define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */
663 #define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */
664 #define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */
665 #define BANDB_USOPTL4_PID 0xAC11
666 #define BANDB_USPTL4_PID 0xAC12
667 #define BANDB_USO9ML2DR_2_PID 0xAC16
668 #define BANDB_USO9ML2DR_PID 0xAC17
669 #define BANDB_USOPTL4DR2_PID 0xAC18 /* USOPTL4R-2 2-port Isolated RS-232 Converter */
670 #define BANDB_USOPTL4DR_PID 0xAC19
671 #define BANDB_485USB9F_2W_PID 0xAC25
672 #define BANDB_485USB9F_4W_PID 0xAC26
673 #define BANDB_232USB9M_PID 0xAC27
674 #define BANDB_485USBTB_2W_PID 0xAC33
675 #define BANDB_485USBTB_4W_PID 0xAC34
676 #define BANDB_TTL5USB9M_PID 0xAC49
677 #define BANDB_TTL3USB9M_PID 0xAC50
678 #define BANDB_ZZ_PROG1_USB_PID 0xBA02
681 * RM Michaelides CANview USB (http://www.rmcan.com)
682 * CAN fieldbus interface adapter, added by port GmbH www.port.de)
683 * Ian Abbott changed the macro names for consistency.
685 #define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */
688 * EVER Eco Pro UPS (http://www.ever.com.pl/)
691 #define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */
694 * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485,
695 * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices
696 * and I'm not entirely sure which are used by which.
698 #define FTDI_4N_GALAXY_DE_1_PID 0xF3C0
699 #define FTDI_4N_GALAXY_DE_2_PID 0xF3C1
702 * Mobility Electronics products.
704 #define MOBILITY_VID 0x1342
705 #define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */
708 * microHAM product IDs (http://www.microham.com).
709 * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>
710 * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>.
711 * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file.
713 #define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */
714 #define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */
715 #define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */
716 #define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */
717 #define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */
718 #define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */
719 #define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */
720 #define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */
723 * Active Robots product ids.
725 #define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */
728 * Xsens Technologies BV products (http://www.xsens.com).
730 #define XSENS_CONVERTER_0_PID 0xD388
731 #define XSENS_CONVERTER_1_PID 0xD389
732 #define XSENS_CONVERTER_2_PID 0xD38A
733 #define XSENS_CONVERTER_3_PID 0xD38B
734 #define XSENS_CONVERTER_4_PID 0xD38C
735 #define XSENS_CONVERTER_5_PID 0xD38D
736 #define XSENS_CONVERTER_6_PID 0xD38E
737 #define XSENS_CONVERTER_7_PID 0xD38F
740 * Teratronik product ids.
741 * Submitted by O. Wölfelschneider.
743 #define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */
744 #define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */
747 * Evolution Robotics products (http://www.evolution.com/).
748 * Submitted by Shawn M. Lavelle.
750 #define EVOLUTION_VID 0xDEEE /* Vendor ID */
751 #define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */
752 #define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/
753 #define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/
754 #define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */
756 /* Pyramid Computer GmbH */
757 #define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */
760 * NDI (www.ndigital.com) product ids
762 #define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */
763 #define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */
764 #define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */
765 #define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */
766 #define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */
769 * Posiflex inc retail equipment (http://www.posiflex.com.tw)
771 #define POSIFLEX_VID 0x0d3a /* Vendor ID */
772 #define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */
775 * Westrex International devices submitted by Cory Lee
777 #define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */
778 #define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */
781 * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
783 #define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */
786 * Eclo (http://www.eclo.pt/) product IDs.
787 * PID 0xEA90 submitted by Martin Grill.
789 #define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */
792 * Papouch products (http://www.papouch.com/)
793 * Submitted by Folkert van Heusden
796 #define PAPOUCH_VID 0x5050 /* Vendor ID */
797 #define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */
798 #define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */
801 * ACG Identification Technologies GmbH products (http://www.acg.de/).
802 * Submitted by anton -at- goto10 -dot- org.
804 #define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */
807 * Yost Engineering, Inc. products (www.yostengineering.com).
808 * PID 0xE050 submitted by Aaron Prose.
810 #define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */
813 * ThorLabs USB motor drivers
815 #define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */
818 * Testo products (http://www.testo.com/)
819 * Submitted by Colin Leroy
821 #define TESTO_VID 0x128D
822 #define TESTO_USB_INTERFACE_PID 0x0001
825 * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com.
827 #define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */
830 * Tactrix OpenPort (ECU) devices.
831 * OpenPort 1.3M submitted by Donour Sizemore.
832 * OpenPort 1.3S and 1.3U submitted by Ian Abbott.
834 #define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */
835 #define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */
836 #define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */
839 * Telldus Technologies
841 #define TELLDUS_VID 0x1781 /* Vendor ID */
842 #define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */
845 * IBS elektronik product ids
846 * Submitted by Thomas Schleusener
848 #define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */
849 #define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */
850 #define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */
851 #define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */
852 #define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */
853 #define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */
854 #define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */
855 #define FTDI_IBS_PROD_PID 0xff3f /* future device */
858 * MaxStream devices www.maxstream.net
860 #define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */
863 #define OLIMEX_VID 0x15BA
864 #define OLIMEX_ARM_USB_OCD_PID 0x0003
866 /* Luminary Micro Stellaris Boards, VID = FTDI_VID */
867 /* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */
868 #define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8
869 #define LMI_LM3S_EVAL_BOARD_PID 0xbcd9
871 /* www.elsterelectricity.com Elster Unicom III Optical Probe */
872 #define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */
875 * The Mobility Lab (TML)
876 * Submitted by Pierre Castella
878 #define TML_VID 0x1B91 /* Vendor ID */
879 #define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */
882 #define FTDI_PROPOX_JTAGCABLEII_PID 0xD738
884 /* Rig Expert Ukraine devices */
885 #define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */
887 /* Domintell products http://www.domintell.com */
888 #define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */
889 #define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */
891 /* Alti-2 products http://www.alti-2.com */
892 #define ALTI2_VID 0x1BC9
893 #define ALTI2_N3_PID 0x6001 /* Neptune 3 */
896 #define FTDI_SIO_RESET 0 /* Reset the port */
897 #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
898 #define FTDI_SIO_SET_FLOW_CTRL 2 /* Set flow control register */
899 #define FTDI_SIO_SET_BAUD_RATE 3 /* Set baud rate */
900 #define FTDI_SIO_SET_DATA 4 /* Set the data characteristics of the port */
901 #define FTDI_SIO_GET_MODEM_STATUS 5 /* Retrieve current value of modern status register */
902 #define FTDI_SIO_SET_EVENT_CHAR 6 /* Set the event character */
903 #define FTDI_SIO_SET_ERROR_CHAR 7 /* Set the error character */
904 #define FTDI_SIO_SET_LATENCY_TIMER 9 /* Set the latency timer */
905 #define FTDI_SIO_GET_LATENCY_TIMER 10 /* Get the latency timer */
907 /* Interface indicies for FT2232, FT2232H and FT4232H devices*/
908 #define INTERFACE_A 1
909 #define INTERFACE_B 2
910 #define INTERFACE_C 3
911 #define INTERFACE_D 4
914 * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3
915 * Submitted by Harald Welte <laforge@openmoko.org>
917 #define FIC_VID 0x1457
918 #define FIC_NEO1973_DEBUG_PID 0x5118
923 #define RATOC_VENDOR_ID 0x0584
924 #define RATOC_PRODUCT_ID_USB60F 0xb020
929 #define DIEBOLD_BCS_SE923_PID 0xfb99
934 #define ATMEL_VID 0x03eb /* Vendor ID */
935 #define STK541_PID 0x2109 /* Zigbee Controller */
938 * Dresden Elektronic Sensor Terminal Board
940 #define DE_VID 0x1cf1 /* Vendor ID */
941 #define STB_PID 0x0001 /* Sensor Terminal Board */
942 #define WHT_PID 0x0004 /* Wireless Handheld Terminal */
945 * Blackfin gnICE JTAG
946 * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice
948 #define ADI_VID 0x0456
949 #define ADI_GNICE_PID 0xF000
950 #define ADI_GNICEPLUS_PID 0xF001
953 * JETI SPECTROMETER SPECBOS 1201
954 * http://www.jeti.com/products/sys/scb/scb1201.php
956 #define JETI_VID 0x0c6c
957 #define JETI_SPC1201_PID 0x04b2
962 #define MARVELL_VID 0x9e88
963 #define MARVELL_SHEEVAPLUG_PID 0x9e8f
965 #define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */
968 * GN Otometrics (http://www.otometrics.com)
969 * Submitted by Ville Sundberg.
971 #define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */
972 #define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */
975 * Bayer Ascensia Contour blood glucose meter USB-converter cable.
976 * http://winglucofacts.com/cables/
978 #define BAYER_VID 0x1A79
979 #define BAYER_CONTOUR_CABLE_PID 0x6001
982 * Marvell OpenRD Base, Client
983 * http://www.open-rd.org
984 * OpenRD Base, Client use VID 0x0403
986 #define MARVELL_OPENRD_PID 0x9e90
989 * Hameg HO820 and HO870 interface (using VID 0x0403)
991 #define HAMEG_HO820_PID 0xed74
992 #define HAMEG_HO870_PID 0xed71
995 * BmRequestType: 1100 0000b
996 * bRequest: FTDI_E2_READ
998 * wIndex: Address of word to read
1000 * Data: Will return a word of data from E2Address
1004 /* Port Identifier Table */
1005 #define PIT_DEFAULT 0 /* SIOA */
1006 #define PIT_SIOA 1 /* SIOA */
1007 /* The device this driver is tested with one has only one port */
1008 #define PIT_SIOB 2 /* SIOB */
1009 #define PIT_PARALLEL 3 /* Parallel */
1011 /* FTDI_SIO_RESET */
1012 #define FTDI_SIO_RESET_REQUEST FTDI_SIO_RESET
1013 #define FTDI_SIO_RESET_REQUEST_TYPE 0x40
1014 #define FTDI_SIO_RESET_SIO 0
1015 #define FTDI_SIO_RESET_PURGE_RX 1
1016 #define FTDI_SIO_RESET_PURGE_TX 2
1019 * BmRequestType: 0100 0000B
1020 * bRequest: FTDI_SIO_RESET
1021 * wValue: Control Value
1023 * 1 = Purge RX buffer
1024 * 2 = Purge TX buffer
1029 * The Reset SIO command has this effect:
1031 * Sets flow control set to 'none'
1033 * Event trigger = disabled
1038 * baud and data format not reset
1040 * The Purge RX and TX buffer commands affect nothing except the buffers
1044 /* FTDI_SIO_SET_BAUDRATE */
1045 #define FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE 0x40
1046 #define FTDI_SIO_SET_BAUDRATE_REQUEST 3
1049 * BmRequestType: 0100 0000B
1050 * bRequest: FTDI_SIO_SET_BAUDRATE
1051 * wValue: BaudDivisor value - see below
1055 * The BaudDivisor values are calculated as follows:
1056 * - BaseClock is either 12000000 or 48000000 depending on the device. FIXME: I wish
1057 * I knew how to detect old chips to select proper base clock!
1058 * - BaudDivisor is a fixed point number encoded in a funny way.
1059 * (--WRONG WAY OF THINKING--)
1060 * BaudDivisor is a fixed point number encoded with following bit weighs:
1061 * (-2)(-1)(13..0). It is a radical with a denominator of 4, so values
1062 * end with 0.0 (00...), 0.25 (10...), 0.5 (01...), and 0.75 (11...).
1064 * The both-bits-set has quite different meaning from 0.75 - the chip designers
1065 * have decided it to mean 0.125 instead of 0.75.
1066 * This info looked up in FTDI application note "FT8U232 DEVICES \ Data Rates
1067 * and Flow Control Consideration for USB to RS232".
1068 * - BaudDivisor = (BaseClock / 16) / BaudRate, where the (=) operation should
1069 * automagically re-encode the resulting value to take fractions into consideration.
1070 * As all values are integers, some bit twiddling is in order:
1071 * BaudDivisor = (BaseClock / 16 / BaudRate) |
1072 * (((BaseClock / 2 / BaudRate) & 4) ? 0x4000 // 0.5
1073 * : ((BaseClock / 2 / BaudRate) & 2) ? 0x8000 // 0.25
1074 * : ((BaseClock / 2 / BaudRate) & 1) ? 0xc000 // 0.125
1077 * For the FT232BM, a 17th divisor bit was introduced to encode the multiples
1078 * of 0.125 missing from the FT8U232AM. Bits 16 to 14 are coded as follows
1079 * (the first four codes are the same as for the FT8U232AM, where bit 16 is
1081 * 000 - add .000 to divisor
1082 * 001 - add .500 to divisor
1083 * 010 - add .250 to divisor
1084 * 011 - add .125 to divisor
1085 * 100 - add .375 to divisor
1086 * 101 - add .625 to divisor
1087 * 110 - add .750 to divisor
1088 * 111 - add .875 to divisor
1089 * Bits 15 to 0 of the 17-bit divisor are placed in the urb value. Bit 16 is
1090 * placed in bit 0 of the urb index.
1092 * Note that there are a couple of special cases to support the highest baud
1093 * rates. If the calculated divisor value is 1, this needs to be replaced with
1094 * 0. Additionally for the FT232BM, if the calculated divisor value is 0x4001
1095 * (1.5), this needs to be replaced with 0x0001 (1) (but this divisor value is
1096 * not supported by the FT8U232AM).
1116 ftdi_sio_b19200 = 6,
1117 ftdi_sio_b38400 = 7,
1118 ftdi_sio_b57600 = 8,
1119 ftdi_sio_b115200 = 9
1120 } FTDI_SIO_baudrate_t;
1123 * The ftdi_8U232AM_xxMHz_byyy constants have been removed. The encoded divisor values
1124 * are calculated internally.
1127 #define FTDI_SIO_SET_DATA_REQUEST FTDI_SIO_SET_DATA
1128 #define FTDI_SIO_SET_DATA_REQUEST_TYPE 0x40
1129 #define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8)
1130 #define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8)
1131 #define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8)
1132 #define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8)
1133 #define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8)
1134 #define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11)
1135 #define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11)
1136 #define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11)
1137 #define FTDI_SIO_SET_BREAK (0x1 << 14)
1138 /* FTDI_SIO_SET_DATA */
1141 * BmRequestType: 0100 0000B
1142 * bRequest: FTDI_SIO_SET_DATA
1143 * wValue: Data characteristics (see below)
1148 * Data characteristics
1150 * B0..7 Number of data bits
1163 * 0 = TX OFF (normal state)
1170 /* FTDI_SIO_MODEM_CTRL */
1171 #define FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE 0x40
1172 #define FTDI_SIO_SET_MODEM_CTRL_REQUEST FTDI_SIO_MODEM_CTRL
1175 * BmRequestType: 0100 0000B
1176 * bRequest: FTDI_SIO_MODEM_CTRL
1177 * wValue: ControlValue (see below)
1182 * NOTE: If the device is in RTS/CTS flow control, the RTS set by this
1183 * command will be IGNORED without an error being returned
1184 * Also - you can not set DTR and RTS with one control message
1187 #define FTDI_SIO_SET_DTR_MASK 0x1
1188 #define FTDI_SIO_SET_DTR_HIGH (1 | (FTDI_SIO_SET_DTR_MASK << 8))
1189 #define FTDI_SIO_SET_DTR_LOW (0 | (FTDI_SIO_SET_DTR_MASK << 8))
1190 #define FTDI_SIO_SET_RTS_MASK 0x2
1191 #define FTDI_SIO_SET_RTS_HIGH (2 | (FTDI_SIO_SET_RTS_MASK << 8))
1192 #define FTDI_SIO_SET_RTS_LOW (0 | (FTDI_SIO_SET_RTS_MASK << 8))
1203 * B8 DTR state enable
1206 * B9 RTS state enable
1212 /* FTDI_SIO_SET_FLOW_CTRL */
1213 #define FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE 0x40
1214 #define FTDI_SIO_SET_FLOW_CTRL_REQUEST FTDI_SIO_SET_FLOW_CTRL
1215 #define FTDI_SIO_DISABLE_FLOW_CTRL 0x0
1216 #define FTDI_SIO_RTS_CTS_HS (0x1 << 8)
1217 #define FTDI_SIO_DTR_DSR_HS (0x2 << 8)
1218 #define FTDI_SIO_XON_XOFF_HS (0x4 << 8)
1220 * BmRequestType: 0100 0000b
1221 * bRequest: FTDI_SIO_SET_FLOW_CTRL
1223 * wIndex: Protocol/Port - hIndex is protocl / lIndex is port
1227 * hIndex protocol is:
1228 * B0 Output handshaking using RTS/CTS
1231 * B1 Output handshaking using DTR/DSR
1234 * B2 Xon/Xoff handshaking
1238 * A value of zero in the hIndex field disables handshaking
1240 * If Xon/Xoff handshaking is specified, the hValue field should contain the XOFF character
1241 * and the lValue field contains the XON character.
1245 * FTDI_SIO_GET_LATENCY_TIMER
1247 * Set the timeout interval. The FTDI collects data from the slave
1248 * device, transmitting it to the host when either A) 62 bytes are
1249 * received, or B) the timeout interval has elapsed and the buffer
1250 * contains at least 1 byte. Setting this value to a small number
1251 * can dramatically improve performance for applications which send
1252 * small packets, since the default value is 16ms.
1254 #define FTDI_SIO_GET_LATENCY_TIMER_REQUEST FTDI_SIO_GET_LATENCY_TIMER
1255 #define FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE 0xC0
1258 * BmRequestType: 1100 0000b
1259 * bRequest: FTDI_SIO_GET_LATENCY_TIMER
1263 * Data: latency (on return)
1267 * FTDI_SIO_SET_LATENCY_TIMER
1269 * Set the timeout interval. The FTDI collects data from the slave
1270 * device, transmitting it to the host when either A) 62 bytes are
1271 * received, or B) the timeout interval has elapsed and the buffer
1272 * contains at least 1 byte. Setting this value to a small number
1273 * can dramatically improve performance for applications which send
1274 * small packets, since the default value is 16ms.
1276 #define FTDI_SIO_SET_LATENCY_TIMER_REQUEST FTDI_SIO_SET_LATENCY_TIMER
1277 #define FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE 0x40
1280 * BmRequestType: 0100 0000b
1281 * bRequest: FTDI_SIO_SET_LATENCY_TIMER
1282 * wValue: Latency (milliseconds)
1288 * B0..7 Latency timer
1294 * FTDI_SIO_SET_EVENT_CHAR
1296 * Set the special event character for the specified communications port.
1297 * If the device sees this character it will immediately return the
1298 * data read so far - rather than wait 40ms or until 62 bytes are read
1299 * which is what normally happens.
1303 #define FTDI_SIO_SET_EVENT_CHAR_REQUEST FTDI_SIO_SET_EVENT_CHAR
1304 #define FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE 0x40
1308 * BmRequestType: 0100 0000b
1309 * bRequest: FTDI_SIO_SET_EVENT_CHAR
1316 * B0..7 Event Character
1317 * B8 Event Character Processing
1324 /* FTDI_SIO_SET_ERROR_CHAR */
1326 /* Set the parity error replacement character for the specified communications port */
1329 * BmRequestType: 0100 0000b
1330 * bRequest: FTDI_SIO_SET_EVENT_CHAR
1331 * wValue: Error Char
1337 * B0..7 Error Character
1338 * B8 Error Character Processing
1345 /* FTDI_SIO_GET_MODEM_STATUS */
1346 /* Retrieve the current value of the modem status register */
1348 #define FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE 0xc0
1349 #define FTDI_SIO_GET_MODEM_STATUS_REQUEST FTDI_SIO_GET_MODEM_STATUS
1350 #define FTDI_SIO_CTS_MASK 0x10
1351 #define FTDI_SIO_DSR_MASK 0x20
1352 #define FTDI_SIO_RI_MASK 0x40
1353 #define FTDI_SIO_RLSD_MASK 0x80
1355 * BmRequestType: 1100 0000b
1356 * bRequest: FTDI_SIO_GET_MODEM_STATUS
1362 * One byte of data is returned
1370 * B6 Ring Indicator (RI)
1373 * B7 Receive Line Signal Detect (RLSD)
1380 /* Descriptors returned by the device
1384 * Offset Field Size Value Description
1385 * 0 bLength 1 0x12 Size of descriptor in bytes
1386 * 1 bDescriptorType 1 0x01 DEVICE Descriptor Type
1387 * 2 bcdUSB 2 0x0110 USB Spec Release Number
1388 * 4 bDeviceClass 1 0x00 Class Code
1389 * 5 bDeviceSubClass 1 0x00 SubClass Code
1390 * 6 bDeviceProtocol 1 0x00 Protocol Code
1391 * 7 bMaxPacketSize0 1 0x08 Maximum packet size for endpoint 0
1392 * 8 idVendor 2 0x0403 Vendor ID
1393 * 10 idProduct 2 0x8372 Product ID (FTDI_SIO_PID)
1394 * 12 bcdDevice 2 0x0001 Device release number
1395 * 14 iManufacturer 1 0x01 Index of man. string desc
1396 * 15 iProduct 1 0x02 Index of prod string desc
1397 * 16 iSerialNumber 1 0x02 Index of serial nmr string desc
1398 * 17 bNumConfigurations 1 0x01 Number of possible configurations
1400 * Configuration Descriptor
1402 * Offset Field Size Value
1403 * 0 bLength 1 0x09 Size of descriptor in bytes
1404 * 1 bDescriptorType 1 0x02 CONFIGURATION Descriptor Type
1405 * 2 wTotalLength 2 0x0020 Total length of data
1406 * 4 bNumInterfaces 1 0x01 Number of interfaces supported
1407 * 5 bConfigurationValue 1 0x01 Argument for SetCOnfiguration() req
1408 * 6 iConfiguration 1 0x02 Index of config string descriptor
1409 * 7 bmAttributes 1 0x20 Config characteristics Remote Wakeup
1410 * 8 MaxPower 1 0x1E Max power consumption
1412 * Interface Descriptor
1414 * Offset Field Size Value
1415 * 0 bLength 1 0x09 Size of descriptor in bytes
1416 * 1 bDescriptorType 1 0x04 INTERFACE Descriptor Type
1417 * 2 bInterfaceNumber 1 0x00 Number of interface
1418 * 3 bAlternateSetting 1 0x00 Value used to select alternate
1419 * 4 bNumEndpoints 1 0x02 Number of endpoints
1420 * 5 bInterfaceClass 1 0xFF Class Code
1421 * 6 bInterfaceSubClass 1 0xFF Subclass Code
1422 * 7 bInterfaceProtocol 1 0xFF Protocol Code
1423 * 8 iInterface 1 0x02 Index of interface string description
1425 * IN Endpoint Descriptor
1427 * Offset Field Size Value
1428 * 0 bLength 1 0x07 Size of descriptor in bytes
1429 * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type
1430 * 2 bEndpointAddress 1 0x82 Address of endpoint
1431 * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk
1432 * 4 bNumEndpoints 2 0x0040 maximum packet size
1433 * 5 bInterval 1 0x00 Interval for polling endpoint
1435 * OUT Endpoint Descriptor
1437 * Offset Field Size Value
1438 * 0 bLength 1 0x07 Size of descriptor in bytes
1439 * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type
1440 * 2 bEndpointAddress 1 0x02 Address of endpoint
1441 * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk
1442 * 4 bNumEndpoints 2 0x0040 maximum packet size
1443 * 5 bInterval 1 0x00 Interval for polling endpoint
1449 * The device reserves the first two bytes of data on this endpoint to contain the current
1450 * values of the modem and line status registers. In the absence of data, the device
1451 * generates a message consisting of these two status bytes every 40 ms
1453 * Byte 0: Modem Status
1455 * Offset Description
1456 * B0 Reserved - must be 1
1457 * B1 Reserved - must be 0
1458 * B2 Reserved - must be 0
1459 * B3 Reserved - must be 0
1460 * B4 Clear to Send (CTS)
1461 * B5 Data Set Ready (DSR)
1462 * B6 Ring Indicator (RI)
1463 * B7 Receive Line Signal Detect (RLSD)
1465 * Byte 1: Line Status
1467 * Offset Description
1468 * B0 Data Ready (DR)
1469 * B1 Overrun Error (OE)
1470 * B2 Parity Error (PE)
1471 * B3 Framing Error (FE)
1472 * B4 Break Interrupt (BI)
1473 * B5 Transmitter Holding Register (THRE)
1474 * B6 Transmitter Empty (TEMT)
1475 * B7 Error in RCVR FIFO
1478 #define FTDI_RS0_CTS (1 << 4)
1479 #define FTDI_RS0_DSR (1 << 5)
1480 #define FTDI_RS0_RI (1 << 6)
1481 #define FTDI_RS0_RLSD (1 << 7)
1483 #define FTDI_RS_DR 1
1484 #define FTDI_RS_OE (1<<1)
1485 #define FTDI_RS_PE (1<<2)
1486 #define FTDI_RS_FE (1<<3)
1487 #define FTDI_RS_BI (1<<4)
1488 #define FTDI_RS_THRE (1<<5)
1489 #define FTDI_RS_TEMT (1<<6)
1490 #define FTDI_RS_FIFO (1<<7)
1495 * This device reserves the first bytes of data on this endpoint contain the length
1496 * and port identifier of the message. For the FTDI USB Serial converter the port
1497 * identifier is always 1.
1499 * Byte 0: Line Status
1501 * Offset Description
1502 * B0 Reserved - must be 1
1503 * B1 Reserved - must be 0
1504 * B2..7 Length of message - (not including Byte 0)