drivers/usb/serial/cypress_m8.c

   1 /*
   2  * USB Cypress M8 driver
   3  *
   4  *      Copyright (C) 2004
   5  *          Lonnie Mendez (dignome@gmail.com)
   6  *      Copyright (C) 2003,2004
   7  *          Neil Whelchel (koyama@firstlight.net)
   8  *
   9  *      This program is free software; you can redistribute it and/or modify
  10  *      it under the terms of the GNU General Public License as published by
  11  *      the Free Software Foundation; either version 2 of the License, or
  12  *      (at your option) any later version.
  13  *
  14  * See Documentation/usb/usb-serial.txt for more information on using this
  15  * driver
  16  *
  17  * See http://geocities.com/i0xox0i for information on this driver and the
  18  * earthmate usb device.
  19  */
  20
  21 /* Thanks to Neil Whelchel for writing the first cypress m8 implementation
  22    for linux. */
  23 /* Thanks to cypress for providing references for the hid reports. */
  24 /* Thanks to Jiang Zhang for providing links and for general help. */
  25 /* Code originates and was built up from ftdi_sio, belkin, pl2303 and others.*/
  26
  27
  28 #include <linux/kernel.h>
  29 #include <linux/errno.h>
  30 #include <linux/init.h>
  31 #include <linux/slab.h>
  32 #include <linux/tty.h>
  33 #include <linux/tty_driver.h>
  34 #include <linux/tty_flip.h>
  35 #include <linux/module.h>
  36 #include <linux/moduleparam.h>
  37 #include <linux/spinlock.h>
  38 #include <linux/usb.h>
  39 #include <linux/usb/serial.h>
  40 #include <linux/serial.h>
  41 #include <linux/kfifo.h>
  42 #include <linux/delay.h>
  43 #include <linux/uaccess.h>
  44 #include <asm/unaligned.h>
  45
  46 #include "cypress_m8.h"
  47
  48
  49 static bool stats;
  50 static int interval;
  51 static bool unstable_bauds;
  52
  53 #define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>"
  54 #define DRIVER_DESC "Cypress USB to Serial Driver"
  55
  56 /* write buffer size defines */
  57 #define CYPRESS_BUF_SIZE        1024
  58
  59 static const struct usb_device_id id_table_earthmate[] = {
  60         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
  61         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
  62         { }                                             /* Terminating entry */
  63 };
  64
  65 static const struct usb_device_id id_table_cyphidcomrs232[] = {
  66         { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
  67         { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
  68         { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
  69         { }                                             /* Terminating entry */
  70 };
  71
  72 static const struct usb_device_id id_table_nokiaca42v2[] = {
  73         { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
  74         { }                                             /* Terminating entry */
  75 };
  76
  77 static const struct usb_device_id id_table_combined[] = {
  78         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
  79         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
  80         { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
  81         { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
  82         { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
  83         { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
  84         { }                                             /* Terminating entry */
  85 };
  86
  87 MODULE_DEVICE_TABLE(usb, id_table_combined);
  88
  89 enum packet_format {
  90         packet_format_1,  /* b0:status, b1:payload count */
  91         packet_format_2   /* b0[7:3]:status, b0[2:0]:payload count */
  92 };
  93
  94 struct cypress_private {
  95         spinlock_t lock;                   /* private lock */
  96         int chiptype;                      /* identifier of device, for quirks/etc */
  97         int bytes_in;                      /* used for statistics */
  98         int bytes_out;                     /* used for statistics */
  99         int cmd_count;                     /* used for statistics */
 100         int cmd_ctrl;                      /* always set this to 1 before issuing a command */
 101         struct kfifo write_fifo;           /* write fifo */
 102         int write_urb_in_use;              /* write urb in use indicator */
 103         int write_urb_interval;            /* interval to use for write urb */
 104         int read_urb_interval;             /* interval to use for read urb */
 105         int comm_is_ok;                    /* true if communication is (still) ok */
 106         int termios_initialized;
 107         __u8 line_control;                 /* holds dtr / rts value */
 108         __u8 current_status;               /* received from last read - info on dsr,cts,cd,ri,etc */
 109         __u8 current_config;               /* stores the current configuration byte */
 110         __u8 rx_flags;                     /* throttling - used from whiteheat/ftdi_sio */
 111         enum packet_format pkt_fmt;        /* format to use for packet send / receive */
 112         int get_cfg_unsafe;                /* If true, the CYPRESS_GET_CONFIG is unsafe */
 113         int baud_rate;                     /* stores current baud rate in
 114                                               integer form */
 115         int isthrottled;                   /* if throttled, discard reads */
 116         char prev_status, diff_status;     /* used for TIOCMIWAIT */
 117         /* we pass a pointer to this as the argument sent to
 118            cypress_set_termios old_termios */
 119         struct ktermios tmp_termios;       /* stores the old termios settings */
 120 };
 121
 122 /* function prototypes for the Cypress USB to serial device */
 123 static int  cypress_earthmate_port_probe(struct usb_serial_port *port);
 124 static int  cypress_hidcom_port_probe(struct usb_serial_port *port);
 125 static int  cypress_ca42v2_port_probe(struct usb_serial_port *port);
 126 static int  cypress_port_remove(struct usb_serial_port *port);
 127 static int  cypress_open(struct tty_struct *tty, struct usb_serial_port *port);
 128 static void cypress_close(struct usb_serial_port *port);
 129 static void cypress_dtr_rts(struct usb_serial_port *port, int on);
 130 static int  cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
 131                         const unsigned char *buf, int count);
 132 static void cypress_send(struct usb_serial_port *port);
 133 static int  cypress_write_room(struct tty_struct *tty);
 134 static void cypress_set_termios(struct tty_struct *tty,
 135                         struct usb_serial_port *port, struct ktermios *old);
 136 static int  cypress_tiocmget(struct tty_struct *tty);
 137 static int  cypress_tiocmset(struct tty_struct *tty,
 138                         unsigned int set, unsigned int clear);
 139 static int  cypress_tiocmiwait(struct tty_struct *tty, unsigned long arg);
 140 static int  cypress_chars_in_buffer(struct tty_struct *tty);
 141 static void cypress_throttle(struct tty_struct *tty);
 142 static void cypress_unthrottle(struct tty_struct *tty);
 143 static void cypress_set_dead(struct usb_serial_port *port);
 144 static void cypress_read_int_callback(struct urb *urb);
 145 static void cypress_write_int_callback(struct urb *urb);
 146
 147 static struct usb_serial_driver cypress_earthmate_device = {
 148         .driver = {
 149                 .owner =                THIS_MODULE,
 150                 .name =                 "earthmate",
 151         },
 152         .description =                  "DeLorme Earthmate USB",
 153         .id_table =                     id_table_earthmate,
 154         .num_ports =                    1,
 155         .port_probe =                   cypress_earthmate_port_probe,
 156         .port_remove =                  cypress_port_remove,
 157         .open =                         cypress_open,
 158         .close =                        cypress_close,
 159         .dtr_rts =                      cypress_dtr_rts,
 160         .write =                        cypress_write,
 161         .write_room =                   cypress_write_room,
 162         .set_termios =                  cypress_set_termios,
 163         .tiocmget =                     cypress_tiocmget,
 164         .tiocmset =                     cypress_tiocmset,
 165         .tiocmiwait =                   cypress_tiocmiwait,
 166         .chars_in_buffer =              cypress_chars_in_buffer,
 167         .throttle =                     cypress_throttle,
 168         .unthrottle =                   cypress_unthrottle,
 169         .read_int_callback =            cypress_read_int_callback,
 170         .write_int_callback =           cypress_write_int_callback,
 171 };
 172
 173 static struct usb_serial_driver cypress_hidcom_device = {
 174         .driver = {
 175                 .owner =                THIS_MODULE,
 176                 .name =                 "cyphidcom",
 177         },
 178         .description =                  "HID->COM RS232 Adapter",
 179         .id_table =                     id_table_cyphidcomrs232,
 180         .num_ports =                    1,
 181         .port_probe =                   cypress_hidcom_port_probe,
 182         .port_remove =                  cypress_port_remove,
 183         .open =                         cypress_open,
 184         .close =                        cypress_close,
 185         .dtr_rts =                      cypress_dtr_rts,
 186         .write =                        cypress_write,
 187         .write_room =                   cypress_write_room,
 188         .set_termios =                  cypress_set_termios,
 189         .tiocmget =                     cypress_tiocmget,
 190         .tiocmset =                     cypress_tiocmset,
 191         .tiocmiwait =                   cypress_tiocmiwait,
 192         .chars_in_buffer =              cypress_chars_in_buffer,
 193         .throttle =                     cypress_throttle,
 194         .unthrottle =                   cypress_unthrottle,
 195         .read_int_callback =            cypress_read_int_callback,
 196         .write_int_callback =           cypress_write_int_callback,
 197 };
 198
 199 static struct usb_serial_driver cypress_ca42v2_device = {
 200         .driver = {
 201                 .owner =                THIS_MODULE,
 202                 .name =                 "nokiaca42v2",
 203         },
 204         .description =                  "Nokia CA-42 V2 Adapter",
 205         .id_table =                     id_table_nokiaca42v2,
 206         .num_ports =                    1,
 207         .port_probe =                   cypress_ca42v2_port_probe,
 208         .port_remove =                  cypress_port_remove,
 209         .open =                         cypress_open,
 210         .close =                        cypress_close,
 211         .dtr_rts =                      cypress_dtr_rts,
 212         .write =                        cypress_write,
 213         .write_room =                   cypress_write_room,
 214         .set_termios =                  cypress_set_termios,
 215         .tiocmget =                     cypress_tiocmget,
 216         .tiocmset =                     cypress_tiocmset,
 217         .tiocmiwait =                   cypress_tiocmiwait,
 218         .chars_in_buffer =              cypress_chars_in_buffer,
 219         .throttle =                     cypress_throttle,
 220         .unthrottle =                   cypress_unthrottle,
 221         .read_int_callback =            cypress_read_int_callback,
 222         .write_int_callback =           cypress_write_int_callback,
 223 };
 224
 225 static struct usb_serial_driver * const serial_drivers[] = {
 226         &cypress_earthmate_device, &cypress_hidcom_device,
 227         &cypress_ca42v2_device, NULL
 228 };
 229
 230 /*****************************************************************************
 231  * Cypress serial helper functions
 232  *****************************************************************************/
 233
 234 /* FRWD Dongle hidcom needs to skip reset and speed checks */
 235 static inline bool is_frwd(struct usb_device *dev)
 236 {
 237         return ((le16_to_cpu(dev->descriptor.idVendor) == VENDOR_ID_FRWD) &&
 238                 (le16_to_cpu(dev->descriptor.idProduct) == PRODUCT_ID_CYPHIDCOM_FRWD));
 239 }
 240
 241 static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
 242 {
 243         struct cypress_private *priv;
 244         priv = usb_get_serial_port_data(port);
 245
 246         if (unstable_bauds)
 247                 return new_rate;
 248
 249         /* FRWD Dongle uses 115200 bps */
 250         if (is_frwd(port->serial->dev))
 251                 return new_rate;
 252
 253         /*
 254          * The general purpose firmware for the Cypress M8 allows for
 255          * a maximum speed of 57600bps (I have no idea whether DeLorme
 256          * chose to use the general purpose firmware or not), if you
 257          * need to modify this speed setting for your own project
 258          * please add your own chiptype and modify the code likewise.
 259          * The Cypress HID->COM device will work successfully up to
 260          * 115200bps (but the actual throughput is around 3kBps).
 261          */
 262         if (port->serial->dev->speed == USB_SPEED_LOW) {
 263                 /*
 264                  * Mike Isely <isely@pobox.com> 2-Feb-2008: The
 265                  * Cypress app note that describes this mechanism
 266                  * states the the low-speed part can't handle more
 267                  * than 800 bytes/sec, in which case 4800 baud is the
 268                  * safest speed for a part like that.
 269                  */
 270                 if (new_rate > 4800) {
 271                         dev_dbg(&port->dev,
 272                                 "%s - failed setting baud rate, device incapable speed %d\n",
 273                                 __func__, new_rate);
 274                         return -1;
 275                 }
 276         }
 277         switch (priv->chiptype) {
 278         case CT_EARTHMATE:
 279                 if (new_rate <= 600) {
 280                         /* 300 and 600 baud rates are supported under
 281                          * the generic firmware, but are not used with
 282                          * NMEA and SiRF protocols */
 283                         dev_dbg(&port->dev,
 284                                 "%s - failed setting baud rate, unsupported speed of %d on Earthmate GPS",
 285                                 __func__, new_rate);
 286                         return -1;
 287                 }
 288                 break;
 289         default:
 290                 break;
 291         }
 292         return new_rate;
 293 }
 294
 295
 296 /* This function can either set or retrieve the current serial line settings */
 297 static int cypress_serial_control(struct tty_struct *tty,
 298         struct usb_serial_port *port, speed_t baud_rate, int data_bits,
 299         int stop_bits, int parity_enable, int parity_type, int reset,
 300         int cypress_request_type)
 301 {
 302         int new_baudrate = 0, retval = 0, tries = 0;
 303         struct cypress_private *priv;
 304         struct device *dev = &port->dev;
 305         u8 *feature_buffer;
 306         const unsigned int feature_len = 5;
 307         unsigned long flags;
 308
 309         priv = usb_get_serial_port_data(port);
 310
 311         if (!priv->comm_is_ok)
 312                 return -ENODEV;
 313
 314         feature_buffer = kcalloc(feature_len, sizeof(u8), GFP_KERNEL);
 315         if (!feature_buffer)
 316                 return -ENOMEM;
 317
 318         switch (cypress_request_type) {
 319         case CYPRESS_SET_CONFIG:
 320                 /* 0 means 'Hang up' so doesn't change the true bit rate */
 321                 new_baudrate = priv->baud_rate;
 322                 if (baud_rate && baud_rate != priv->baud_rate) {
 323                         dev_dbg(dev, "%s - baud rate is changing\n", __func__);
 324                         retval = analyze_baud_rate(port, baud_rate);
 325                         if (retval >= 0) {
 326                                 new_baudrate = retval;
 327                                 dev_dbg(dev, "%s - New baud rate set to %d\n",
 328                                         __func__, new_baudrate);
 329                         }
 330                 }
 331                 dev_dbg(dev, "%s - baud rate is being sent as %d\n", __func__,
 332                         new_baudrate);
 333
 334                 /* fill the feature_buffer with new configuration */
 335                 put_unaligned_le32(new_baudrate, feature_buffer);
 336                 feature_buffer[4] |= data_bits;   /* assign data bits in 2 bit space ( max 3 ) */
 337                 /* 1 bit gap */
 338                 feature_buffer[4] |= (stop_bits << 3);   /* assign stop bits in 1 bit space */
 339                 feature_buffer[4] |= (parity_enable << 4);   /* assign parity flag in 1 bit space */
 340                 feature_buffer[4] |= (parity_type << 5);   /* assign parity type in 1 bit space */
 341                 /* 1 bit gap */
 342                 feature_buffer[4] |= (reset << 7);   /* assign reset at end of byte, 1 bit space */
 343
 344                 dev_dbg(dev, "%s - device is being sent this feature report:\n", __func__);
 345                 dev_dbg(dev, "%s - %02X - %02X - %02X - %02X - %02X\n", __func__,
 346                         feature_buffer[0], feature_buffer[1],
 347                         feature_buffer[2], feature_buffer[3],
 348                         feature_buffer[4]);
 349
 350                 do {
 351                         retval = usb_control_msg(port->serial->dev,
 352                                         usb_sndctrlpipe(port->serial->dev, 0),
 353                                         HID_REQ_SET_REPORT,
 354                                         USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
 355                                         0x0300, 0, feature_buffer,
 356                                         feature_len, 500);
 357
 358                         if (tries++ >= 3)
 359                                 break;
 360
 361                 } while (retval != feature_len &&
 362                          retval != -ENODEV);
 363
 364                 if (retval != feature_len) {
 365                         dev_err(dev, "%s - failed sending serial line settings - %d\n",
 366                                 __func__, retval);
 367                         cypress_set_dead(port);
 368                 } else {
 369                         spin_lock_irqsave(&priv->lock, flags);
 370                         priv->baud_rate = new_baudrate;
 371                         priv->current_config = feature_buffer[4];
 372                         spin_unlock_irqrestore(&priv->lock, flags);
 373                         /* If we asked for a speed change encode it */
 374                         if (baud_rate)
 375                                 tty_encode_baud_rate(tty,
 376                                         new_baudrate, new_baudrate);
 377                 }
 378         break;
 379         case CYPRESS_GET_CONFIG:
 380                 if (priv->get_cfg_unsafe) {
 381                         /* Not implemented for this device,
 382                            and if we try to do it we're likely
 383                            to crash the hardware. */
 384                         retval = -ENOTTY;
 385                         goto out;
 386                 }
 387                 dev_dbg(dev, "%s - retreiving serial line settings\n", __func__);
 388                 do {
 389                         retval = usb_control_msg(port->serial->dev,
 390                                         usb_rcvctrlpipe(port->serial->dev, 0),
 391                                         HID_REQ_GET_REPORT,
 392                                         USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
 393                                         0x0300, 0, feature_buffer,
 394                                         feature_len, 500);
 395
 396                         if (tries++ >= 3)
 397                                 break;
 398                 } while (retval != feature_len
 399                                                 && retval != -ENODEV);
 400
 401                 if (retval != feature_len) {
 402                         dev_err(dev, "%s - failed to retrieve serial line settings - %d\n",
 403                                 __func__, retval);
 404                         cypress_set_dead(port);
 405                         goto out;
 406                 } else {
 407                         spin_lock_irqsave(&priv->lock, flags);
 408                         /* store the config in one byte, and later
 409                            use bit masks to check values */
 410                         priv->current_config = feature_buffer[4];
 411                         priv->baud_rate = get_unaligned_le32(feature_buffer);
 412                         spin_unlock_irqrestore(&priv->lock, flags);
 413                 }
 414         }
 415         spin_lock_irqsave(&priv->lock, flags);
 416         ++priv->cmd_count;
 417         spin_unlock_irqrestore(&priv->lock, flags);
 418 out:
 419         kfree(feature_buffer);
 420         return retval;
 421 } /* cypress_serial_control */
 422
 423
 424 static void cypress_set_dead(struct usb_serial_port *port)
 425 {
 426         struct cypress_private *priv = usb_get_serial_port_data(port);
 427         unsigned long flags;
 428
 429         spin_lock_irqsave(&priv->lock, flags);
 430         if (!priv->comm_is_ok) {
 431                 spin_unlock_irqrestore(&priv->lock, flags);
 432                 return;
 433         }
 434         priv->comm_is_ok = 0;
 435         spin_unlock_irqrestore(&priv->lock, flags);
 436
 437         dev_err(&port->dev, "cypress_m8 suspending failing port %d - "
 438                 "interval might be too short\n", port->number);
 439 }
 440
 441
 442 /*****************************************************************************
 443  * Cypress serial driver functions
 444  *****************************************************************************/
 445
 446
 447 static int cypress_generic_port_probe(struct usb_serial_port *port)
 448 {
 449         struct usb_serial *serial = port->serial;
 450         struct cypress_private *priv;
 451
 452         priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL);
 453         if (!priv)
 454                 return -ENOMEM;
 455
 456         priv->comm_is_ok = !0;
 457         spin_lock_init(&priv->lock);
 458         if (kfifo_alloc(&priv->write_fifo, CYPRESS_BUF_SIZE, GFP_KERNEL)) {
 459                 kfree(priv);
 460                 return -ENOMEM;
 461         }
 462
 463         /* Skip reset for FRWD device. It is a workaound:
 464            device hangs if it receives SET_CONFIGURE in Configured
 465            state. */
 466         if (!is_frwd(serial->dev))
 467                 usb_reset_configuration(serial->dev);
 468
 469         priv->cmd_ctrl = 0;
 470         priv->line_control = 0;
 471         priv->termios_initialized = 0;
 472         priv->rx_flags = 0;
 473         /* Default packet format setting is determined by packet size.
 474            Anything with a size larger then 9 must have a separate
 475            count field since the 3 bit count field is otherwise too
 476            small.  Otherwise we can use the slightly more compact
 477            format.  This is in accordance with the cypress_m8 serial
 478            converter app note. */
 479         if (port->interrupt_out_size > 9)
 480                 priv->pkt_fmt = packet_format_1;
 481         else
 482                 priv->pkt_fmt = packet_format_2;
 483
 484         if (interval > 0) {
 485                 priv->write_urb_interval = interval;
 486                 priv->read_urb_interval = interval;
 487                 dev_dbg(&port->dev, "%s - read & write intervals forced to %d\n",
 488                         __func__, interval);
 489         } else {
 490                 priv->write_urb_interval = port->interrupt_out_urb->interval;
 491                 priv->read_urb_interval = port->interrupt_in_urb->interval;
 492                 dev_dbg(&port->dev, "%s - intervals: read=%d write=%d\n",
 493                         __func__, priv->read_urb_interval,
 494                         priv->write_urb_interval);
 495         }
 496         usb_set_serial_port_data(port, priv);
 497
 498         return 0;
 499 }
 500
 501
 502 static int cypress_earthmate_port_probe(struct usb_serial_port *port)
 503 {
 504         struct usb_serial *serial = port->serial;
 505         struct cypress_private *priv;
 506         int ret;
 507
 508         ret = cypress_generic_port_probe(port);
 509         if (ret) {
 510                 dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
 511                 return ret;
 512         }
 513
 514         priv = usb_get_serial_port_data(port);
 515         priv->chiptype = CT_EARTHMATE;
 516         /* All Earthmate devices use the separated-count packet
 517            format!  Idiotic. */
 518         priv->pkt_fmt = packet_format_1;
 519         if (serial->dev->descriptor.idProduct !=
 520                                 cpu_to_le16(PRODUCT_ID_EARTHMATEUSB)) {
 521                 /* The old original USB Earthmate seemed able to
 522                    handle GET_CONFIG requests; everything they've
 523                    produced since that time crashes if this command is
 524                    attempted :-( */
 525                 dev_dbg(&port->dev,
 526                         "%s - Marking this device as unsafe for GET_CONFIG commands\n",
 527                         __func__);
 528                 priv->get_cfg_unsafe = !0;
 529         }
 530
 531         return 0;
 532 }
 533
 534 static int cypress_hidcom_port_probe(struct usb_serial_port *port)
 535 {
 536         struct cypress_private *priv;
 537         int ret;
 538
 539         ret = cypress_generic_port_probe(port);
 540         if (ret) {
 541                 dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
 542                 return ret;
 543         }
 544
 545         priv = usb_get_serial_port_data(port);
 546         priv->chiptype = CT_CYPHIDCOM;
 547
 548         return 0;
 549 }
 550
 551 static int cypress_ca42v2_port_probe(struct usb_serial_port *port)
 552 {
 553         struct cypress_private *priv;
 554         int ret;
 555
 556         ret = cypress_generic_port_probe(port);
 557         if (ret) {
 558                 dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
 559                 return ret;
 560         }
 561
 562         priv = usb_get_serial_port_data(port);
 563         priv->chiptype = CT_CA42V2;
 564
 565         return 0;
 566 }
 567
 568 static int cypress_port_remove(struct usb_serial_port *port)
 569 {
 570         struct cypress_private *priv;
 571
 572         priv = usb_get_serial_port_data(port);
 573
 574         kfifo_free(&priv->write_fifo);
 575         kfree(priv);
 576
 577         return 0;
 578 }
 579
 580 static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port)
 581 {
 582         struct cypress_private *priv = usb_get_serial_port_data(port);
 583         struct usb_serial *serial = port->serial;
 584         unsigned long flags;
 585         int result = 0;
 586
 587         if (!priv->comm_is_ok)
 588                 return -EIO;
 589
 590         /* clear halts before open */
 591         usb_clear_halt(serial->dev, 0x81);
 592         usb_clear_halt(serial->dev, 0x02);
 593
 594         spin_lock_irqsave(&priv->lock, flags);
 595         /* reset read/write statistics */
 596         priv->bytes_in = 0;
 597         priv->bytes_out = 0;
 598         priv->cmd_count = 0;
 599         priv->rx_flags = 0;
 600         spin_unlock_irqrestore(&priv->lock, flags);
 601
 602         /* Set termios */
 603         cypress_send(port);
 604
 605         if (tty)
 606                 cypress_set_termios(tty, port, &priv->tmp_termios);
 607
 608         /* setup the port and start reading from the device */
 609         if (!port->interrupt_in_urb) {
 610                 dev_err(&port->dev, "%s - interrupt_in_urb is empty!\n",
 611                         __func__);
 612                 return -1;
 613         }
 614
 615         usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
 616                 usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
 617                 port->interrupt_in_urb->transfer_buffer,
 618                 port->interrupt_in_urb->transfer_buffer_length,
 619                 cypress_read_int_callback, port, priv->read_urb_interval);
 620         result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 621
 622         if (result) {
 623                 dev_err(&port->dev,
 624                         "%s - failed submitting read urb, error %d\n",
 625                                                         __func__, result);
 626                 cypress_set_dead(port);
 627         }
 628         port->port.drain_delay = 256;
 629         return result;
 630 } /* cypress_open */
 631
 632 static void cypress_dtr_rts(struct usb_serial_port *port, int on)
 633 {
 634         struct cypress_private *priv = usb_get_serial_port_data(port);
 635         /* drop dtr and rts */
 636         spin_lock_irq(&priv->lock);
 637         if (on == 0)
 638                 priv->line_control = 0;
 639         else
 640                 priv->line_control = CONTROL_DTR | CONTROL_RTS;
 641         priv->cmd_ctrl = 1;
 642         spin_unlock_irq(&priv->lock);
 643         cypress_write(NULL, port, NULL, 0);
 644 }
 645
 646 static void cypress_close(struct usb_serial_port *port)
 647 {
 648         struct cypress_private *priv = usb_get_serial_port_data(port);
 649         unsigned long flags;
 650
 651         spin_lock_irqsave(&priv->lock, flags);
 652         kfifo_reset_out(&priv->write_fifo);
 653         spin_unlock_irqrestore(&priv->lock, flags);
 654
 655         dev_dbg(&port->dev, "%s - stopping urbs\n", __func__);
 656         usb_kill_urb(port->interrupt_in_urb);
 657         usb_kill_urb(port->interrupt_out_urb);
 658
 659         if (stats)
 660                 dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
 661                         priv->bytes_in, priv->bytes_out, priv->cmd_count);
 662 } /* cypress_close */
 663
 664
 665 static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
 666                                         const unsigned char *buf, int count)
 667 {
 668         struct cypress_private *priv = usb_get_serial_port_data(port);
 669
 670         dev_dbg(&port->dev, "%s - port %d, %d bytes\n", __func__, port->number, count);
 671
 672         /* line control commands, which need to be executed immediately,
 673            are not put into the buffer for obvious reasons.
 674          */
 675         if (priv->cmd_ctrl) {
 676                 count = 0;
 677                 goto finish;
 678         }
 679
 680         if (!count)
 681                 return count;
 682
 683         count = kfifo_in_locked(&priv->write_fifo, buf, count, &priv->lock);
 684
 685 finish:
 686         cypress_send(port);
 687
 688         return count;
 689 } /* cypress_write */
 690
 691
 692 static void cypress_send(struct usb_serial_port *port)
 693 {
 694         int count = 0, result, offset, actual_size;
 695         struct cypress_private *priv = usb_get_serial_port_data(port);
 696         struct device *dev = &port->dev;
 697         unsigned long flags;
 698
 699         if (!priv->comm_is_ok)
 700                 return;
 701
 702         dev_dbg(dev, "%s - interrupt out size is %d\n", __func__,
 703                 port->interrupt_out_size);
 704
 705         spin_lock_irqsave(&priv->lock, flags);
 706         if (priv->write_urb_in_use) {
 707                 dev_dbg(dev, "%s - can't write, urb in use\n", __func__);
 708                 spin_unlock_irqrestore(&priv->lock, flags);
 709                 return;
 710         }
 711         spin_unlock_irqrestore(&priv->lock, flags);
 712
 713         /* clear buffer */
 714         memset(port->interrupt_out_urb->transfer_buffer, 0,
 715                                                 port->interrupt_out_size);
 716
 717         spin_lock_irqsave(&priv->lock, flags);
 718         switch (priv->pkt_fmt) {
 719         default:
 720         case packet_format_1:
 721                 /* this is for the CY7C64013... */
 722                 offset = 2;
 723                 port->interrupt_out_buffer[0] = priv->line_control;
 724                 break;
 725         case packet_format_2:
 726                 /* this is for the CY7C63743... */
 727                 offset = 1;
 728                 port->interrupt_out_buffer[0] = priv->line_control;
 729                 break;
 730         }
 731
 732         if (priv->line_control & CONTROL_RESET)
 733                 priv->line_control &= ~CONTROL_RESET;
 734
 735         if (priv->cmd_ctrl) {
 736                 priv->cmd_count++;
 737                 dev_dbg(dev, "%s - line control command being issued\n", __func__);
 738                 spin_unlock_irqrestore(&priv->lock, flags);
 739                 goto send;
 740         } else
 741                 spin_unlock_irqrestore(&priv->lock, flags);
 742
 743         count = kfifo_out_locked(&priv->write_fifo,
 744                                         &port->interrupt_out_buffer[offset],
 745                                         port->interrupt_out_size - offset,
 746                                         &priv->lock);
 747         if (count == 0)
 748                 return;
 749
 750         switch (priv->pkt_fmt) {
 751         default:
 752         case packet_format_1:
 753                 port->interrupt_out_buffer[1] = count;
 754                 break;
 755         case packet_format_2:
 756                 port->interrupt_out_buffer[0] |= count;
 757         }
 758
 759         dev_dbg(dev, "%s - count is %d\n", __func__, count);
 760
 761 send:
 762         spin_lock_irqsave(&priv->lock, flags);
 763         priv->write_urb_in_use = 1;
 764         spin_unlock_irqrestore(&priv->lock, flags);
 765
 766         if (priv->cmd_ctrl)
 767                 actual_size = 1;
 768         else
 769                 actual_size = count +
 770                               (priv->pkt_fmt == packet_format_1 ? 2 : 1);
 771
 772         usb_serial_debug_data(dev, __func__, port->interrupt_out_size,
 773                               port->interrupt_out_urb->transfer_buffer);
 774
 775         usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev,
 776                 usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
 777                 port->interrupt_out_buffer, port->interrupt_out_size,
 778                 cypress_write_int_callback, port, priv->write_urb_interval);
 779         result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
 780         if (result) {
 781                 dev_err_console(port,
 782                                 "%s - failed submitting write urb, error %d\n",
 783                                                         __func__, result);
 784                 priv->write_urb_in_use = 0;
 785                 cypress_set_dead(port);
 786         }
 787
 788         spin_lock_irqsave(&priv->lock, flags);
 789         if (priv->cmd_ctrl)
 790                 priv->cmd_ctrl = 0;
 791
 792         /* do not count the line control and size bytes */
 793         priv->bytes_out += count;
 794         spin_unlock_irqrestore(&priv->lock, flags);
 795
 796         usb_serial_port_softint(port);
 797 } /* cypress_send */
 798
 799
 800 /* returns how much space is available in the soft buffer */
 801 static int cypress_write_room(struct tty_struct *tty)
 802 {
 803         struct usb_serial_port *port = tty->driver_data;
 804         struct cypress_private *priv = usb_get_serial_port_data(port);
 805         int room = 0;
 806         unsigned long flags;
 807
 808         spin_lock_irqsave(&priv->lock, flags);
 809         room = kfifo_avail(&priv->write_fifo);
 810         spin_unlock_irqrestore(&priv->lock, flags);
 811
 812         dev_dbg(&port->dev, "%s - returns %d\n", __func__, room);
 813         return room;
 814 }
 815
 816
 817 static int cypress_tiocmget(struct tty_struct *tty)
 818 {
 819         struct usb_serial_port *port = tty->driver_data;
 820         struct cypress_private *priv = usb_get_serial_port_data(port);
 821         __u8 status, control;
 822         unsigned int result = 0;
 823         unsigned long flags;
 824
 825         spin_lock_irqsave(&priv->lock, flags);
 826         control = priv->line_control;
 827         status = priv->current_status;
 828         spin_unlock_irqrestore(&priv->lock, flags);
 829
 830         result = ((control & CONTROL_DTR)        ? TIOCM_DTR : 0)
 831                 | ((control & CONTROL_RTS)       ? TIOCM_RTS : 0)
 832                 | ((status & UART_CTS)        ? TIOCM_CTS : 0)
 833                 | ((status & UART_DSR)        ? TIOCM_DSR : 0)
 834                 | ((status & UART_RI)         ? TIOCM_RI  : 0)
 835                 | ((status & UART_CD)         ? TIOCM_CD  : 0);
 836
 837         dev_dbg(&port->dev, "%s - result = %x\n", __func__, result);
 838
 839         return result;
 840 }
 841
 842
 843 static int cypress_tiocmset(struct tty_struct *tty,
 844                                unsigned int set, unsigned int clear)
 845 {
 846         struct usb_serial_port *port = tty->driver_data;
 847         struct cypress_private *priv = usb_get_serial_port_data(port);
 848         unsigned long flags;
 849
 850         spin_lock_irqsave(&priv->lock, flags);
 851         if (set & TIOCM_RTS)
 852                 priv->line_control |= CONTROL_RTS;
 853         if (set & TIOCM_DTR)
 854                 priv->line_control |= CONTROL_DTR;
 855         if (clear & TIOCM_RTS)
 856                 priv->line_control &= ~CONTROL_RTS;
 857         if (clear & TIOCM_DTR)
 858                 priv->line_control &= ~CONTROL_DTR;
 859         priv->cmd_ctrl = 1;
 860         spin_unlock_irqrestore(&priv->lock, flags);
 861
 862         return cypress_write(tty, port, NULL, 0);
 863 }
 864
 865
 866 static int cypress_tiocmiwait(struct tty_struct *tty, unsigned long arg)
 867 {
 868         struct usb_serial_port *port = tty->driver_data;
 869         struct cypress_private *priv = usb_get_serial_port_data(port);
 870         char diff;
 871
 872         for (;;) {
 873                 interruptible_sleep_on(&port->port.delta_msr_wait);
 874                 /* see if a signal did it */
 875                 if (signal_pending(current))
 876                         return -ERESTARTSYS;
 877
 878                 if (port->serial->disconnected)
 879                         return -EIO;
 880
 881                 diff = priv->diff_status;
 882                 if (diff == 0)
 883                         return -EIO; /* no change => error */
 884
 885                 /* consume all events */
 886                 priv->diff_status = 0;
 887
 888                 /* return 0 if caller wanted to know about
 889                    these bits */
 890                 if (((arg & TIOCM_RNG) && (diff & UART_RI))  ||
 891                         ((arg & TIOCM_DSR) && (diff & UART_DSR)) ||
 892                         ((arg & TIOCM_CD)  && (diff & UART_CD))  ||
 893                         ((arg & TIOCM_CTS) && (diff & UART_CTS)))
 894                         return 0;
 895                 /* otherwise caller can't care less about what
 896                  * happened, and so we continue to wait for
 897                  * more events.
 898                  */
 899         }
 900
 901         return 0;
 902 }
 903
 904 static void cypress_set_termios(struct tty_struct *tty,
 905         struct usb_serial_port *port, struct ktermios *old_termios)
 906 {
 907         struct cypress_private *priv = usb_get_serial_port_data(port);
 908         struct device *dev = &port->dev;
 909         int data_bits, stop_bits, parity_type, parity_enable;
 910         unsigned cflag, iflag;
 911         unsigned long flags;
 912         __u8 oldlines;
 913         int linechange = 0;
 914
 915         spin_lock_irqsave(&priv->lock, flags);
 916         /* We can't clean this one up as we don't know the device type
 917            early enough */
 918         if (!priv->termios_initialized) {
 919                 if (priv->chiptype == CT_EARTHMATE) {
 920                         tty->termios = tty_std_termios;
 921                         tty->termios.c_cflag = B4800 | CS8 | CREAD | HUPCL |
 922                                 CLOCAL;
 923                         tty->termios.c_ispeed = 4800;
 924                         tty->termios.c_ospeed = 4800;
 925                 } else if (priv->chiptype == CT_CYPHIDCOM) {
 926                         tty->termios = tty_std_termios;
 927                         tty->termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
 928                                 CLOCAL;
 929                         tty->termios.c_ispeed = 9600;
 930                         tty->termios.c_ospeed = 9600;
 931                 } else if (priv->chiptype == CT_CA42V2) {
 932                         tty->termios = tty_std_termios;
 933                         tty->termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
 934                                 CLOCAL;
 935                         tty->termios.c_ispeed = 9600;
 936                         tty->termios.c_ospeed = 9600;
 937                 }
 938                 priv->termios_initialized = 1;
 939         }
 940         spin_unlock_irqrestore(&priv->lock, flags);
 941
 942         /* Unsupported features need clearing */
 943         tty->termios.c_cflag &= ~(CMSPAR|CRTSCTS);
 944
 945         cflag = tty->termios.c_cflag;
 946         iflag = tty->termios.c_iflag;
 947
 948         /* check if there are new settings */
 949         if (old_termios) {
 950                 spin_lock_irqsave(&priv->lock, flags);
 951                 priv->tmp_termios = tty->termios;
 952                 spin_unlock_irqrestore(&priv->lock, flags);
 953         }
 954
 955         /* set number of data bits, parity, stop bits */
 956         /* when parity is disabled the parity type bit is ignored */
 957
 958         /* 1 means 2 stop bits, 0 means 1 stop bit */
 959         stop_bits = cflag & CSTOPB ? 1 : 0;
 960
 961         if (cflag & PARENB) {
 962                 parity_enable = 1;
 963                 /* 1 means odd parity, 0 means even parity */
 964                 parity_type = cflag & PARODD ? 1 : 0;
 965         } else
 966                 parity_enable = parity_type = 0;
 967
 968         switch (cflag & CSIZE) {
 969         case CS5:
 970                 data_bits = 0;
 971                 break;
 972         case CS6:
 973                 data_bits = 1;
 974                 break;
 975         case CS7:
 976                 data_bits = 2;
 977                 break;
 978         case CS8:
 979                 data_bits = 3;
 980                 break;
 981         default:
 982                 dev_err(dev, "%s - CSIZE was set, but not CS5-CS8\n", __func__);
 983                 data_bits = 3;
 984         }
 985         spin_lock_irqsave(&priv->lock, flags);
 986         oldlines = priv->line_control;
 987         if ((cflag & CBAUD) == B0) {
 988                 /* drop dtr and rts */
 989                 dev_dbg(dev, "%s - dropping the lines, baud rate 0bps\n", __func__);
 990                 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
 991         } else
 992                 priv->line_control = (CONTROL_DTR | CONTROL_RTS);
 993         spin_unlock_irqrestore(&priv->lock, flags);
 994
 995         dev_dbg(dev, "%s - sending %d stop_bits, %d parity_enable, %d parity_type, %d data_bits (+5)\n",
 996                 __func__, stop_bits, parity_enable, parity_type, data_bits);
 997
 998         cypress_serial_control(tty, port, tty_get_baud_rate(tty),
 999                         data_bits, stop_bits,
1000                         parity_enable, parity_type,
1001                         0, CYPRESS_SET_CONFIG);
1002
1003         /* we perform a CYPRESS_GET_CONFIG so that the current settings are
1004          * filled into the private structure this should confirm that all is
1005          * working if it returns what we just set */
1006         cypress_serial_control(tty, port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG);
1007
1008         /* Here we can define custom tty settings for devices; the main tty
1009          * termios flag base comes from empeg.c */
1010
1011         spin_lock_irqsave(&priv->lock, flags);
1012         if (priv->chiptype == CT_EARTHMATE && priv->baud_rate == 4800) {
1013                 dev_dbg(dev, "Using custom termios settings for a baud rate of 4800bps.\n");
1014                 /* define custom termios settings for NMEA protocol */
1015
1016                 tty->termios.c_iflag /* input modes - */
1017                         &= ~(IGNBRK  /* disable ignore break */
1018                         | BRKINT     /* disable break causes interrupt */
1019                         | PARMRK     /* disable mark parity errors */
1020                         | ISTRIP     /* disable clear high bit of input char */
1021                         | INLCR      /* disable translate NL to CR */
1022                         | IGNCR      /* disable ignore CR */
1023                         | ICRNL      /* disable translate CR to NL */
1024                         | IXON);     /* disable enable XON/XOFF flow control */
1025
1026                 tty->termios.c_oflag /* output modes */
1027                         &= ~OPOST;    /* disable postprocess output char */
1028
1029                 tty->termios.c_lflag /* line discipline modes */
1030                         &= ~(ECHO     /* disable echo input characters */
1031                         | ECHONL      /* disable echo new line */
1032                         | ICANON      /* disable erase, kill, werase, and rprnt
1033                                          special characters */
1034                         | ISIG        /* disable interrupt, quit, and suspend
1035                                          special characters */
1036                         | IEXTEN);    /* disable non-POSIX special characters */
1037         } /* CT_CYPHIDCOM: Application should handle this for device */
1038
1039         linechange = (priv->line_control != oldlines);
1040         spin_unlock_irqrestore(&priv->lock, flags);
1041
1042         /* if necessary, set lines */
1043         if (linechange) {
1044                 priv->cmd_ctrl = 1;
1045                 cypress_write(tty, port, NULL, 0);
1046         }
1047 } /* cypress_set_termios */
1048
1049
1050 /* returns amount of data still left in soft buffer */
1051 static int cypress_chars_in_buffer(struct tty_struct *tty)
1052 {
1053         struct usb_serial_port *port = tty->driver_data;
1054         struct cypress_private *priv = usb_get_serial_port_data(port);
1055         int chars = 0;
1056         unsigned long flags;
1057
1058         spin_lock_irqsave(&priv->lock, flags);
1059         chars = kfifo_len(&priv->write_fifo);
1060         spin_unlock_irqrestore(&priv->lock, flags);
1061
1062         dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars);
1063         return chars;
1064 }
1065
1066
1067 static void cypress_throttle(struct tty_struct *tty)
1068 {
1069         struct usb_serial_port *port = tty->driver_data;
1070         struct cypress_private *priv = usb_get_serial_port_data(port);
1071
1072         spin_lock_irq(&priv->lock);
1073         priv->rx_flags = THROTTLED;
1074         spin_unlock_irq(&priv->lock);
1075 }
1076
1077
1078 static void cypress_unthrottle(struct tty_struct *tty)
1079 {
1080         struct usb_serial_port *port = tty->driver_data;
1081         struct cypress_private *priv = usb_get_serial_port_data(port);
1082         int actually_throttled, result;
1083
1084         spin_lock_irq(&priv->lock);
1085         actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
1086         priv->rx_flags = 0;
1087         spin_unlock_irq(&priv->lock);
1088
1089         if (!priv->comm_is_ok)
1090                 return;
1091
1092         if (actually_throttled) {
1093                 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
1094                 if (result) {
1095                         dev_err(&port->dev, "%s - failed submitting read urb, "
1096                                         "error %d\n", __func__, result);
1097                         cypress_set_dead(port);
1098                 }
1099         }
1100 }
1101
1102
1103 static void cypress_read_int_callback(struct urb *urb)
1104 {
1105         struct usb_serial_port *port = urb->context;
1106         struct cypress_private *priv = usb_get_serial_port_data(port);
1107         struct device *dev = &urb->dev->dev;
1108         struct tty_struct *tty;
1109         unsigned char *data = urb->transfer_buffer;
1110         unsigned long flags;
1111         char tty_flag = TTY_NORMAL;
1112         int havedata = 0;
1113         int bytes = 0;
1114         int result;
1115         int i = 0;
1116         int status = urb->status;
1117
1118         switch (status) {
1119         case 0: /* success */
1120                 break;
1121         case -ECONNRESET:
1122         case -ENOENT:
1123         case -ESHUTDOWN:
1124                 /* precursor to disconnect so just go away */
1125                 return;
1126         case -EPIPE:
1127                 /* Can't call usb_clear_halt while in_interrupt */
1128                 /* FALLS THROUGH */
1129         default:
1130                 /* something ugly is going on... */
1131                 dev_err(dev, "%s - unexpected nonzero read status received: %d\n",
1132                         __func__, status);
1133                 cypress_set_dead(port);
1134                 return;
1135         }
1136
1137         spin_lock_irqsave(&priv->lock, flags);
1138         if (priv->rx_flags & THROTTLED) {
1139                 dev_dbg(dev, "%s - now throttling\n", __func__);
1140                 priv->rx_flags |= ACTUALLY_THROTTLED;
1141                 spin_unlock_irqrestore(&priv->lock, flags);
1142                 return;
1143         }
1144         spin_unlock_irqrestore(&priv->lock, flags);
1145
1146         tty = tty_port_tty_get(&port->port);
1147         if (!tty) {
1148                 dev_dbg(dev, "%s - bad tty pointer - exiting\n", __func__);
1149                 return;
1150         }
1151
1152         spin_lock_irqsave(&priv->lock, flags);
1153         result = urb->actual_length;
1154         switch (priv->pkt_fmt) {
1155         default:
1156         case packet_format_1:
1157                 /* This is for the CY7C64013... */
1158                 priv->current_status = data[0] & 0xF8;
1159                 bytes = data[1] + 2;
1160                 i = 2;
1161                 if (bytes > 2)
1162                         havedata = 1;
1163                 break;
1164         case packet_format_2:
1165                 /* This is for the CY7C63743... */
1166                 priv->current_status = data[0] & 0xF8;
1167                 bytes = (data[0] & 0x07) + 1;
1168                 i = 1;
1169                 if (bytes > 1)
1170                         havedata = 1;
1171                 break;
1172         }
1173         spin_unlock_irqrestore(&priv->lock, flags);
1174         if (result < bytes) {
1175                 dev_dbg(dev,
1176                         "%s - wrong packet size - received %d bytes but packet said %d bytes\n",
1177                         __func__, result, bytes);
1178                 goto continue_read;
1179         }
1180
1181         usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);
1182
1183         spin_lock_irqsave(&priv->lock, flags);
1184         /* check to see if status has changed */
1185         if (priv->current_status != priv->prev_status) {
1186                 priv->diff_status |= priv->current_status ^
1187                         priv->prev_status;
1188                 wake_up_interruptible(&port->port.delta_msr_wait);
1189                 priv->prev_status = priv->current_status;
1190         }
1191         spin_unlock_irqrestore(&priv->lock, flags);
1192
1193         /* hangup, as defined in acm.c... this might be a bad place for it
1194          * though */
1195         if (tty && !(tty->termios.c_cflag & CLOCAL) &&
1196                         !(priv->current_status & UART_CD)) {
1197                 dev_dbg(dev, "%s - calling hangup\n", __func__);
1198                 tty_hangup(tty);
1199                 goto continue_read;
1200         }
1201
1202         /* There is one error bit... I'm assuming it is a parity error
1203          * indicator as the generic firmware will set this bit to 1 if a
1204          * parity error occurs.
1205          * I can not find reference to any other error events. */
1206         spin_lock_irqsave(&priv->lock, flags);
1207         if (priv->current_status & CYP_ERROR) {
1208                 spin_unlock_irqrestore(&priv->lock, flags);
1209                 tty_flag = TTY_PARITY;
1210                 dev_dbg(dev, "%s - Parity Error detected\n", __func__);
1211         } else
1212                 spin_unlock_irqrestore(&priv->lock, flags);
1213
1214         /* process read if there is data other than line status */
1215         if (bytes > i) {
1216                 tty_insert_flip_string_fixed_flag(&port->port, data + i,
1217                                 tty_flag, bytes - i);
1218                 tty_flip_buffer_push(&port->port);
1219         }
1220
1221         spin_lock_irqsave(&priv->lock, flags);
1222         /* control and status byte(s) are also counted */
1223         priv->bytes_in += bytes;
1224         spin_unlock_irqrestore(&priv->lock, flags);
1225
1226 continue_read:
1227         tty_kref_put(tty);
1228
1229         /* Continue trying to always read */
1230
1231         if (priv->comm_is_ok) {
1232                 usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
1233                                 usb_rcvintpipe(port->serial->dev,
1234                                         port->interrupt_in_endpointAddress),
1235                                 port->interrupt_in_urb->transfer_buffer,
1236                                 port->interrupt_in_urb->transfer_buffer_length,
1237                                 cypress_read_int_callback, port,
1238                                 priv->read_urb_interval);
1239                 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1240                 if (result && result != -EPERM) {
1241                         dev_err(dev, "%s - failed resubmitting read urb, error %d\n",
1242                                 __func__, result);
1243                         cypress_set_dead(port);
1244                 }
1245         }
1246 } /* cypress_read_int_callback */
1247
1248
1249 static void cypress_write_int_callback(struct urb *urb)
1250 {
1251         struct usb_serial_port *port = urb->context;
1252         struct cypress_private *priv = usb_get_serial_port_data(port);
1253         struct device *dev = &urb->dev->dev;
1254         int result;
1255         int status = urb->status;
1256
1257         switch (status) {
1258         case 0:
1259                 /* success */
1260                 break;
1261         case -ECONNRESET:
1262         case -ENOENT:
1263         case -ESHUTDOWN:
1264                 /* this urb is terminated, clean up */
1265                 dev_dbg(dev, "%s - urb shutting down with status: %d\n",
1266                         __func__, status);
1267                 priv->write_urb_in_use = 0;
1268                 return;
1269         case -EPIPE: /* no break needed; clear halt and resubmit */
1270                 if (!priv->comm_is_ok)
1271                         break;
1272                 usb_clear_halt(port->serial->dev, 0x02);
1273                 /* error in the urb, so we have to resubmit it */
1274                 dev_dbg(dev, "%s - nonzero write bulk status received: %d\n",
1275                         __func__, status);
1276                 port->interrupt_out_urb->transfer_buffer_length = 1;
1277                 result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
1278                 if (!result)
1279                         return;
1280                 dev_err(dev, "%s - failed resubmitting write urb, error %d\n",
1281                         __func__, result);
1282                 cypress_set_dead(port);
1283                 break;
1284         default:
1285                 dev_err(dev, "%s - unexpected nonzero write status received: %d\n",
1286                         __func__, status);
1287                 cypress_set_dead(port);
1288                 break;
1289         }
1290         priv->write_urb_in_use = 0;
1291
1292         /* send any buffered data */
1293         cypress_send(port);
1294 }
1295
1296 module_usb_serial_driver(serial_drivers, id_table_combined);
1297
1298 MODULE_AUTHOR(DRIVER_AUTHOR);
1299 MODULE_DESCRIPTION(DRIVER_DESC);
1300 MODULE_LICENSE("GPL");
1301
1302 module_param(stats, bool, S_IRUGO | S_IWUSR);
1303 MODULE_PARM_DESC(stats, "Enable statistics or not");
1304 module_param(interval, int, S_IRUGO | S_IWUSR);
1305 MODULE_PARM_DESC(interval, "Overrides interrupt interval");
1306 module_param(unstable_bauds, bool, S_IRUGO | S_IWUSR);
1307 MODULE_PARM_DESC(unstable_bauds, "Allow unstable baud rates");