4 * Copyright (C) 2011 Renesas Solutions Corp.
5 * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
7 * This program is distributed in the hope that it will be useful,
8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
10 * GNU General Public License for more details.
12 * You should have received a copy of the GNU General Public License
13 * along with this program; if not, write to the Free Software
14 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
17 #include <linux/err.h>
18 #include <linux/gpio.h>
20 #include <linux/module.h>
21 #include <linux/of_device.h>
22 #include <linux/of_gpio.h>
23 #include <linux/pm_runtime.h>
24 #include <linux/slab.h>
25 #include <linux/sysfs.h>
30 * image of renesas_usbhs
36 * mod_host.c pipe.c fifo.c
38 * +-------+ +-----------+
39 * | pipe0 |------>| fifo pio |
40 * +------------+ +-------+ +-----------+
41 * | mod_gadget |=====> | pipe1 |--+
42 * +------------+ +-------+ | +-----------+
43 * | pipe2 | | +-| fifo dma0 |
44 * +------------+ +-------+ | | +-----------+
45 * | mod_host | | pipe3 |<-|--+
46 * +------------+ +-------+ | +-----------+
47 * | .... | +--->| fifo dma1 |
48 * | .... | +-----------+
52 #define USBHSF_RUNTIME_PWCTRL (1 << 0)
55 #define usbhsc_flags_init(p) do {(p)->flags = 0; } while (0)
56 #define usbhsc_flags_set(p, b) ((p)->flags |= (b))
57 #define usbhsc_flags_clr(p, b) ((p)->flags &= ~(b))
58 #define usbhsc_flags_has(p, b) ((p)->flags & (b))
63 * renesas usb support platform callback function.
64 * Below macro call it.
65 * if platform doesn't have callback, it return 0 (no error)
67 #define usbhs_platform_call(priv, func, args...)\
68 (!(priv) ? -ENODEV : \
69 !((priv)->pfunc.func) ? 0 : \
70 (priv)->pfunc.func(args))
75 u16 usbhs_read(struct usbhs_priv *priv, u32 reg)
77 return ioread16(priv->base + reg);
80 void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data)
82 iowrite16(data, priv->base + reg);
85 void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data)
87 u16 val = usbhs_read(priv, reg);
92 usbhs_write(priv, reg, val);
95 struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev)
97 return dev_get_drvdata(&pdev->dev);
103 static void usbhs_sys_clock_ctrl(struct usbhs_priv *priv, int enable)
105 usbhs_bset(priv, SYSCFG, SCKE, enable ? SCKE : 0);
108 void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable)
110 u16 mask = DCFM | DRPD | DPRPU | HSE | USBE;
111 u16 val = DCFM | DRPD | HSE | USBE;
112 int has_otg = usbhs_get_dparam(priv, has_otg);
115 usbhs_bset(priv, DVSTCTR, (EXTLP | PWEN), (EXTLP | PWEN));
121 * - D+ Line/D- Line Pull-down
123 usbhs_bset(priv, SYSCFG, mask, enable ? val : 0);
126 void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable)
128 u16 mask = DCFM | DRPD | DPRPU | HSE | USBE;
129 u16 val = DPRPU | HSE | USBE;
134 * - select Function mode
137 usbhs_bset(priv, SYSCFG, mask, enable ? val : 0);
140 void usbhs_sys_function_pullup(struct usbhs_priv *priv, int enable)
142 usbhs_bset(priv, SYSCFG, DPRPU, enable ? DPRPU : 0);
145 void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode)
147 usbhs_write(priv, TESTMODE, mode);
153 int usbhs_frame_get_num(struct usbhs_priv *priv)
155 return usbhs_read(priv, FRMNUM) & FRNM_MASK;
159 * usb request functions
161 void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req)
165 val = usbhs_read(priv, USBREQ);
166 req->bRequest = (val >> 8) & 0xFF;
167 req->bRequestType = (val >> 0) & 0xFF;
169 req->wValue = usbhs_read(priv, USBVAL);
170 req->wIndex = usbhs_read(priv, USBINDX);
171 req->wLength = usbhs_read(priv, USBLENG);
174 void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req)
176 usbhs_write(priv, USBREQ, (req->bRequest << 8) | req->bRequestType);
177 usbhs_write(priv, USBVAL, req->wValue);
178 usbhs_write(priv, USBINDX, req->wIndex);
179 usbhs_write(priv, USBLENG, req->wLength);
181 usbhs_bset(priv, DCPCTR, SUREQ, SUREQ);
187 void usbhs_bus_send_sof_enable(struct usbhs_priv *priv)
189 u16 status = usbhs_read(priv, DVSTCTR) & (USBRST | UACT);
191 if (status != USBRST) {
192 struct device *dev = usbhs_priv_to_dev(priv);
193 dev_err(dev, "usbhs should be reset\n");
196 usbhs_bset(priv, DVSTCTR, (USBRST | UACT), UACT);
199 void usbhs_bus_send_reset(struct usbhs_priv *priv)
201 usbhs_bset(priv, DVSTCTR, (USBRST | UACT), USBRST);
204 int usbhs_bus_get_speed(struct usbhs_priv *priv)
206 u16 dvstctr = usbhs_read(priv, DVSTCTR);
208 switch (RHST & dvstctr) {
210 return USB_SPEED_LOW;
211 case RHST_FULL_SPEED:
212 return USB_SPEED_FULL;
213 case RHST_HIGH_SPEED:
214 return USB_SPEED_HIGH;
217 return USB_SPEED_UNKNOWN;
220 int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable)
222 struct platform_device *pdev = usbhs_priv_to_pdev(priv);
224 return usbhs_platform_call(priv, set_vbus, pdev, enable);
227 static void usbhsc_bus_init(struct usbhs_priv *priv)
229 usbhs_write(priv, DVSTCTR, 0);
231 usbhs_vbus_ctrl(priv, 0);
235 * device configuration
237 int usbhs_set_device_config(struct usbhs_priv *priv, int devnum,
238 u16 upphub, u16 hubport, u16 speed)
240 struct device *dev = usbhs_priv_to_dev(priv);
242 u32 reg = DEVADD0 + (2 * devnum);
245 dev_err(dev, "cannot set speed to unknown device %d\n", devnum);
250 dev_err(dev, "unsupported hub number %d\n", upphub);
256 usbspd = USBSPD_SPEED_LOW;
259 usbspd = USBSPD_SPEED_FULL;
262 usbspd = USBSPD_SPEED_HIGH;
265 dev_err(dev, "unsupported speed %d\n", speed);
269 usbhs_write(priv, reg, UPPHUB(upphub) |
279 static void usbhsc_set_buswait(struct usbhs_priv *priv)
281 int wait = usbhs_get_dparam(priv, buswait_bwait);
283 /* set bus wait if platform have */
285 usbhs_bset(priv, BUSWAIT, 0x000F, wait);
289 * platform default param
292 /* commonly used on old SH-Mobile SoCs */
293 static u32 usbhsc_default_pipe_type[] = {
294 USB_ENDPOINT_XFER_CONTROL,
295 USB_ENDPOINT_XFER_ISOC,
296 USB_ENDPOINT_XFER_ISOC,
297 USB_ENDPOINT_XFER_BULK,
298 USB_ENDPOINT_XFER_BULK,
299 USB_ENDPOINT_XFER_BULK,
300 USB_ENDPOINT_XFER_INT,
301 USB_ENDPOINT_XFER_INT,
302 USB_ENDPOINT_XFER_INT,
303 USB_ENDPOINT_XFER_INT,
306 /* commonly used on newer SH-Mobile and R-Car SoCs */
307 static u32 usbhsc_new_pipe_type[] = {
308 USB_ENDPOINT_XFER_CONTROL,
309 USB_ENDPOINT_XFER_ISOC,
310 USB_ENDPOINT_XFER_ISOC,
311 USB_ENDPOINT_XFER_BULK,
312 USB_ENDPOINT_XFER_BULK,
313 USB_ENDPOINT_XFER_BULK,
314 USB_ENDPOINT_XFER_INT,
315 USB_ENDPOINT_XFER_INT,
316 USB_ENDPOINT_XFER_INT,
317 USB_ENDPOINT_XFER_BULK,
318 USB_ENDPOINT_XFER_BULK,
319 USB_ENDPOINT_XFER_BULK,
320 USB_ENDPOINT_XFER_BULK,
321 USB_ENDPOINT_XFER_BULK,
322 USB_ENDPOINT_XFER_BULK,
323 USB_ENDPOINT_XFER_BULK,
329 static void usbhsc_power_ctrl(struct usbhs_priv *priv, int enable)
331 struct platform_device *pdev = usbhs_priv_to_pdev(priv);
332 struct device *dev = usbhs_priv_to_dev(priv);
336 pm_runtime_get_sync(dev);
338 /* enable platform power */
339 usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable);
342 usbhs_sys_clock_ctrl(priv, enable);
345 usbhs_sys_clock_ctrl(priv, enable);
347 /* disable platform power */
348 usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable);
351 pm_runtime_put_sync(dev);
358 static void usbhsc_hotplug(struct usbhs_priv *priv)
360 struct platform_device *pdev = usbhs_priv_to_pdev(priv);
361 struct usbhs_mod *mod = usbhs_mod_get_current(priv);
367 * get vbus status from platform
369 enable = usbhs_platform_call(priv, get_vbus, pdev);
372 * get id from platform
374 id = usbhs_platform_call(priv, get_id, pdev);
376 if (enable && !mod) {
377 ret = usbhs_mod_change(priv, id);
381 dev_dbg(&pdev->dev, "%s enable\n", __func__);
384 if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
385 usbhsc_power_ctrl(priv, enable);
388 usbhsc_set_buswait(priv);
389 usbhsc_bus_init(priv);
392 usbhs_mod_call(priv, start, priv);
394 } else if (!enable && mod) {
395 dev_dbg(&pdev->dev, "%s disable\n", __func__);
398 usbhs_mod_call(priv, stop, priv);
401 usbhsc_bus_init(priv);
404 if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
405 usbhsc_power_ctrl(priv, enable);
407 usbhs_mod_change(priv, -1);
409 /* reset phy for next connection */
410 usbhs_platform_call(priv, phy_reset, pdev);
417 static void usbhsc_notify_hotplug(struct work_struct *work)
419 struct usbhs_priv *priv = container_of(work,
421 notify_hotplug_work.work);
422 usbhsc_hotplug(priv);
425 static int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev)
427 struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
428 int delay = usbhs_get_dparam(priv, detection_delay);
431 * This functions will be called in interrupt.
432 * To make sure safety context,
433 * use workqueue for usbhs_notify_hotplug
435 schedule_delayed_work(&priv->notify_hotplug_work,
436 msecs_to_jiffies(delay));
443 static const struct of_device_id usbhs_of_match[] = {
445 .compatible = "renesas,usbhs-r8a7790",
446 .data = (void *)USBHS_TYPE_R8A7790,
449 .compatible = "renesas,usbhs-r8a7791",
450 .data = (void *)USBHS_TYPE_R8A7791,
454 MODULE_DEVICE_TABLE(of, usbhs_of_match);
456 static struct renesas_usbhs_platform_info *usbhs_parse_dt(struct device *dev)
458 struct renesas_usbhs_platform_info *info;
459 struct renesas_usbhs_driver_param *dparam;
460 const struct of_device_id *of_id = of_match_device(usbhs_of_match, dev);
464 info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
468 dparam = &info->driver_param;
469 dparam->type = of_id ? (u32)of_id->data : 0;
470 if (!of_property_read_u32(dev->of_node, "renesas,buswait", &tmp))
471 dparam->buswait_bwait = tmp;
472 gpio = of_get_named_gpio_flags(dev->of_node, "renesas,enable-gpio", 0,
475 dparam->enable_gpio = gpio;
480 static int usbhs_probe(struct platform_device *pdev)
482 struct renesas_usbhs_platform_info *info = dev_get_platdata(&pdev->dev);
483 struct renesas_usbhs_driver_callback *dfunc;
484 struct usbhs_priv *priv;
485 struct resource *res, *irq_res;
488 /* check device node */
489 if (pdev->dev.of_node)
490 info = pdev->dev.platform_data = usbhs_parse_dt(&pdev->dev);
492 /* check platform information */
494 dev_err(&pdev->dev, "no platform information\n");
499 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
500 irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
501 if (!res || !irq_res) {
502 dev_err(&pdev->dev, "Not enough Renesas USB platform resources.\n");
506 /* usb private data */
507 priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
509 dev_err(&pdev->dev, "Could not allocate priv\n");
513 priv->base = devm_ioremap_resource(&pdev->dev, res);
514 if (IS_ERR(priv->base))
515 return PTR_ERR(priv->base);
521 memcpy(&priv->dparam,
523 sizeof(struct renesas_usbhs_driver_param));
525 switch (priv->dparam.type) {
526 case USBHS_TYPE_R8A7790:
527 case USBHS_TYPE_R8A7791:
528 priv->pfunc = usbhs_rcar2_ops;
529 if (!priv->dparam.pipe_type) {
530 priv->dparam.pipe_type = usbhsc_new_pipe_type;
531 priv->dparam.pipe_size =
532 ARRAY_SIZE(usbhsc_new_pipe_type);
536 if (!info->platform_callback.get_id) {
537 dev_err(&pdev->dev, "no platform callbacks");
541 &info->platform_callback,
542 sizeof(struct renesas_usbhs_platform_callback));
546 /* set driver callback functions for platform */
547 dfunc = &info->driver_callback;
548 dfunc->notify_hotplug = usbhsc_drvcllbck_notify_hotplug;
550 /* set default param if platform doesn't have */
551 if (!priv->dparam.pipe_type) {
552 priv->dparam.pipe_type = usbhsc_default_pipe_type;
553 priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_default_pipe_type);
555 if (!priv->dparam.pio_dma_border)
556 priv->dparam.pio_dma_border = 64; /* 64byte */
559 /* runtime power control ? */
560 if (priv->pfunc.get_vbus)
561 usbhsc_flags_set(priv, USBHSF_RUNTIME_PWCTRL);
566 priv->irq = irq_res->start;
567 if (irq_res->flags & IORESOURCE_IRQ_SHAREABLE)
568 priv->irqflags = IRQF_SHARED;
570 INIT_DELAYED_WORK(&priv->notify_hotplug_work, usbhsc_notify_hotplug);
571 spin_lock_init(usbhs_priv_to_lock(priv));
573 /* call pipe and module init */
574 ret = usbhs_pipe_probe(priv);
578 ret = usbhs_fifo_probe(priv);
580 goto probe_end_pipe_exit;
582 ret = usbhs_mod_probe(priv);
584 goto probe_end_fifo_exit;
586 /* dev_set_drvdata should be called after usbhs_mod_init */
587 platform_set_drvdata(pdev, priv);
590 * deviece reset here because
591 * USB device might be used in boot loader.
593 usbhs_sys_clock_ctrl(priv, 0);
595 /* check GPIO determining if USB function should be enabled */
596 if (priv->dparam.enable_gpio) {
597 gpio_request_one(priv->dparam.enable_gpio, GPIOF_IN, NULL);
598 ret = !gpio_get_value(priv->dparam.enable_gpio);
599 gpio_free(priv->dparam.enable_gpio);
602 "USB function not selected (GPIO %d)\n",
603 priv->dparam.enable_gpio);
605 goto probe_end_mod_exit;
612 * USB phy setup might depend on CPU/Board.
613 * If platform has its callback functions,
616 ret = usbhs_platform_call(priv, hardware_init, pdev);
618 dev_err(&pdev->dev, "platform prove failed.\n");
619 goto probe_end_mod_exit;
622 /* reset phy for connection */
623 usbhs_platform_call(priv, phy_reset, pdev);
626 pm_runtime_enable(&pdev->dev);
627 if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) {
628 usbhsc_power_ctrl(priv, 1);
629 usbhs_mod_autonomy_mode(priv);
633 * manual call notify_hotplug for cold plug
635 ret = usbhsc_drvcllbck_notify_hotplug(pdev);
637 goto probe_end_call_remove;
639 dev_info(&pdev->dev, "probed\n");
643 probe_end_call_remove:
644 usbhs_platform_call(priv, hardware_exit, pdev);
646 usbhs_mod_remove(priv);
648 usbhs_fifo_remove(priv);
650 usbhs_pipe_remove(priv);
652 dev_info(&pdev->dev, "probe failed\n");
657 static int usbhs_remove(struct platform_device *pdev)
659 struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
660 struct renesas_usbhs_platform_info *info = dev_get_platdata(&pdev->dev);
661 struct renesas_usbhs_driver_callback *dfunc = &info->driver_callback;
663 dev_dbg(&pdev->dev, "usb remove\n");
665 dfunc->notify_hotplug = NULL;
668 if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
669 usbhsc_power_ctrl(priv, 0);
671 pm_runtime_disable(&pdev->dev);
673 usbhs_platform_call(priv, hardware_exit, pdev);
674 usbhs_mod_remove(priv);
675 usbhs_fifo_remove(priv);
676 usbhs_pipe_remove(priv);
681 static int usbhsc_suspend(struct device *dev)
683 struct usbhs_priv *priv = dev_get_drvdata(dev);
684 struct usbhs_mod *mod = usbhs_mod_get_current(priv);
687 usbhs_mod_call(priv, stop, priv);
688 usbhs_mod_change(priv, -1);
691 if (mod || !usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
692 usbhsc_power_ctrl(priv, 0);
697 static int usbhsc_resume(struct device *dev)
699 struct usbhs_priv *priv = dev_get_drvdata(dev);
700 struct platform_device *pdev = usbhs_priv_to_pdev(priv);
702 if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
703 usbhsc_power_ctrl(priv, 1);
705 usbhs_platform_call(priv, phy_reset, pdev);
707 usbhsc_drvcllbck_notify_hotplug(pdev);
712 static int usbhsc_runtime_nop(struct device *dev)
714 /* Runtime PM callback shared between ->runtime_suspend()
715 * and ->runtime_resume(). Simply returns success.
717 * This driver re-initializes all registers after
718 * pm_runtime_get_sync() anyway so there is no need
719 * to save and restore registers here.
724 static const struct dev_pm_ops usbhsc_pm_ops = {
725 .suspend = usbhsc_suspend,
726 .resume = usbhsc_resume,
727 .runtime_suspend = usbhsc_runtime_nop,
728 .runtime_resume = usbhsc_runtime_nop,
731 static struct platform_driver renesas_usbhs_driver = {
733 .name = "renesas_usbhs",
734 .pm = &usbhsc_pm_ops,
735 .of_match_table = of_match_ptr(usbhs_of_match),
737 .probe = usbhs_probe,
738 .remove = usbhs_remove,
741 module_platform_driver(renesas_usbhs_driver);
743 MODULE_LICENSE("GPL");
744 MODULE_DESCRIPTION("Renesas USB driver");
745 MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>");