drivers/usb/renesas_usbhs/common.c

   1 /*
   2  * Renesas USB driver
   3  *
   4  * Copyright (C) 2011 Renesas Solutions Corp.
   5  * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
   6  *
   7  * This program is distributed in the hope that it will be useful,
   8  * but WITHOUT ANY WARRANTY; without even the implied warranty of
   9  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  10  * GNU General Public License for more details.
  11  *
  12  * You should have received a copy of the GNU General Public License
  13  * along with this program; if not, write to the Free Software
  14  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  15  *
  16  */
  17 #include <linux/err.h>
  18 #include <linux/gpio.h>
  19 #include <linux/io.h>
  20 #include <linux/module.h>
  21 #include <linux/pm_runtime.h>
  22 #include <linux/slab.h>
  23 #include <linux/sysfs.h>
  24 #include "common.h"
  25 #include "rcar2.h"
  26
  27 /*
  28  *              image of renesas_usbhs
  29  *
  30  * ex) gadget case
  31
  32  * mod.c
  33  * mod_gadget.c
  34  * mod_host.c           pipe.c          fifo.c
  35  *
  36  *                      +-------+       +-----------+
  37  *                      | pipe0 |------>| fifo pio  |
  38  * +------------+       +-------+       +-----------+
  39  * | mod_gadget |=====> | pipe1 |--+
  40  * +------------+       +-------+  |    +-----------+
  41  *                      | pipe2 |  |  +-| fifo dma0 |
  42  * +------------+       +-------+  |  | +-----------+
  43  * | mod_host   |       | pipe3 |<-|--+
  44  * +------------+       +-------+  |    +-----------+
  45  *                      | ....  |  +--->| fifo dma1 |
  46  *                      | ....  |       +-----------+
  47  */
  48
  49
  50 #define USBHSF_RUNTIME_PWCTRL   (1 << 0)
  51
  52 /* status */
  53 #define usbhsc_flags_init(p)   do {(p)->flags = 0; } while (0)
  54 #define usbhsc_flags_set(p, b) ((p)->flags |=  (b))
  55 #define usbhsc_flags_clr(p, b) ((p)->flags &= ~(b))
  56 #define usbhsc_flags_has(p, b) ((p)->flags &   (b))
  57
  58 /*
  59  * platform call back
  60  *
  61  * renesas usb support platform callback function.
  62  * Below macro call it.
  63  * if platform doesn't have callback, it return 0 (no error)
  64  */
  65 #define usbhs_platform_call(priv, func, args...)\
  66         (!(priv) ? -ENODEV :                    \
  67          !((priv)->pfunc.func) ? 0 :            \
  68          (priv)->pfunc.func(args))
  69
  70 /*
  71  *              common functions
  72  */
  73 u16 usbhs_read(struct usbhs_priv *priv, u32 reg)
  74 {
  75         return ioread16(priv->base + reg);
  76 }
  77
  78 void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data)
  79 {
  80         iowrite16(data, priv->base + reg);
  81 }
  82
  83 void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data)
  84 {
  85         u16 val = usbhs_read(priv, reg);
  86
  87         val &= ~mask;
  88         val |= data & mask;
  89
  90         usbhs_write(priv, reg, val);
  91 }
  92
  93 struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev)
  94 {
  95         return dev_get_drvdata(&pdev->dev);
  96 }
  97
  98 /*
  99  *              syscfg functions
 100  */
 101 static void usbhs_sys_clock_ctrl(struct usbhs_priv *priv, int enable)
 102 {
 103         usbhs_bset(priv, SYSCFG, SCKE, enable ? SCKE : 0);
 104 }
 105
 106 void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable)
 107 {
 108         u16 mask = DCFM | DRPD | DPRPU | HSE | USBE;
 109         u16 val  = DCFM | DRPD | HSE | USBE;
 110         int has_otg = usbhs_get_dparam(priv, has_otg);
 111
 112         if (has_otg)
 113                 usbhs_bset(priv, DVSTCTR, (EXTLP | PWEN), (EXTLP | PWEN));
 114
 115         /*
 116          * if enable
 117          *
 118          * - select Host mode
 119          * - D+ Line/D- Line Pull-down
 120          */
 121         usbhs_bset(priv, SYSCFG, mask, enable ? val : 0);
 122 }
 123
 124 void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable)
 125 {
 126         u16 mask = DCFM | DRPD | DPRPU | HSE | USBE;
 127         u16 val  = DPRPU | HSE | USBE;
 128
 129         /*
 130          * if enable
 131          *
 132          * - select Function mode
 133          * - D+ Line Pull-up
 134          */
 135         usbhs_bset(priv, SYSCFG, mask, enable ? val : 0);
 136 }
 137
 138 void usbhs_sys_function_pullup(struct usbhs_priv *priv, int enable)
 139 {
 140         usbhs_bset(priv, SYSCFG, DPRPU, enable ? DPRPU : 0);
 141 }
 142
 143 void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode)
 144 {
 145         usbhs_write(priv, TESTMODE, mode);
 146 }
 147
 148 /*
 149  *              frame functions
 150  */
 151 int usbhs_frame_get_num(struct usbhs_priv *priv)
 152 {
 153         return usbhs_read(priv, FRMNUM) & FRNM_MASK;
 154 }
 155
 156 /*
 157  *              usb request functions
 158  */
 159 void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req)
 160 {
 161         u16 val;
 162
 163         val = usbhs_read(priv, USBREQ);
 164         req->bRequest           = (val >> 8) & 0xFF;
 165         req->bRequestType       = (val >> 0) & 0xFF;
 166
 167         req->wValue     = usbhs_read(priv, USBVAL);
 168         req->wIndex     = usbhs_read(priv, USBINDX);
 169         req->wLength    = usbhs_read(priv, USBLENG);
 170 }
 171
 172 void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req)
 173 {
 174         usbhs_write(priv, USBREQ,  (req->bRequest << 8) | req->bRequestType);
 175         usbhs_write(priv, USBVAL,  req->wValue);
 176         usbhs_write(priv, USBINDX, req->wIndex);
 177         usbhs_write(priv, USBLENG, req->wLength);
 178
 179         usbhs_bset(priv, DCPCTR, SUREQ, SUREQ);
 180 }
 181
 182 /*
 183  *              bus/vbus functions
 184  */
 185 void usbhs_bus_send_sof_enable(struct usbhs_priv *priv)
 186 {
 187         u16 status = usbhs_read(priv, DVSTCTR) & (USBRST | UACT);
 188
 189         if (status != USBRST) {
 190                 struct device *dev = usbhs_priv_to_dev(priv);
 191                 dev_err(dev, "usbhs should be reset\n");
 192         }
 193
 194         usbhs_bset(priv, DVSTCTR, (USBRST | UACT), UACT);
 195 }
 196
 197 void usbhs_bus_send_reset(struct usbhs_priv *priv)
 198 {
 199         usbhs_bset(priv, DVSTCTR, (USBRST | UACT), USBRST);
 200 }
 201
 202 int usbhs_bus_get_speed(struct usbhs_priv *priv)
 203 {
 204         u16 dvstctr = usbhs_read(priv, DVSTCTR);
 205
 206         switch (RHST & dvstctr) {
 207         case RHST_LOW_SPEED:
 208                 return USB_SPEED_LOW;
 209         case RHST_FULL_SPEED:
 210                 return USB_SPEED_FULL;
 211         case RHST_HIGH_SPEED:
 212                 return USB_SPEED_HIGH;
 213         }
 214
 215         return USB_SPEED_UNKNOWN;
 216 }
 217
 218 int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable)
 219 {
 220         struct platform_device *pdev = usbhs_priv_to_pdev(priv);
 221
 222         return usbhs_platform_call(priv, set_vbus, pdev, enable);
 223 }
 224
 225 static void usbhsc_bus_init(struct usbhs_priv *priv)
 226 {
 227         usbhs_write(priv, DVSTCTR, 0);
 228
 229         usbhs_vbus_ctrl(priv, 0);
 230 }
 231
 232 /*
 233  *              device configuration
 234  */
 235 int usbhs_set_device_config(struct usbhs_priv *priv, int devnum,
 236                            u16 upphub, u16 hubport, u16 speed)
 237 {
 238         struct device *dev = usbhs_priv_to_dev(priv);
 239         u16 usbspd = 0;
 240         u32 reg = DEVADD0 + (2 * devnum);
 241
 242         if (devnum > 10) {
 243                 dev_err(dev, "cannot set speed to unknown device %d\n", devnum);
 244                 return -EIO;
 245         }
 246
 247         if (upphub > 0xA) {
 248                 dev_err(dev, "unsupported hub number %d\n", upphub);
 249                 return -EIO;
 250         }
 251
 252         switch (speed) {
 253         case USB_SPEED_LOW:
 254                 usbspd = USBSPD_SPEED_LOW;
 255                 break;
 256         case USB_SPEED_FULL:
 257                 usbspd = USBSPD_SPEED_FULL;
 258                 break;
 259         case USB_SPEED_HIGH:
 260                 usbspd = USBSPD_SPEED_HIGH;
 261                 break;
 262         default:
 263                 dev_err(dev, "unsupported speed %d\n", speed);
 264                 return -EIO;
 265         }
 266
 267         usbhs_write(priv, reg,  UPPHUB(upphub)  |
 268                                 HUBPORT(hubport)|
 269                                 USBSPD(usbspd));
 270
 271         return 0;
 272 }
 273
 274 /*
 275  *              local functions
 276  */
 277 static void usbhsc_set_buswait(struct usbhs_priv *priv)
 278 {
 279         int wait = usbhs_get_dparam(priv, buswait_bwait);
 280
 281         /* set bus wait if platform have */
 282         if (wait)
 283                 usbhs_bset(priv, BUSWAIT, 0x000F, wait);
 284 }
 285
 286 /*
 287  *              platform default param
 288  */
 289
 290 /* commonly used on old SH-Mobile SoCs */
 291 static u32 usbhsc_default_pipe_type[] = {
 292                 USB_ENDPOINT_XFER_CONTROL,
 293                 USB_ENDPOINT_XFER_ISOC,
 294                 USB_ENDPOINT_XFER_ISOC,
 295                 USB_ENDPOINT_XFER_BULK,
 296                 USB_ENDPOINT_XFER_BULK,
 297                 USB_ENDPOINT_XFER_BULK,
 298                 USB_ENDPOINT_XFER_INT,
 299                 USB_ENDPOINT_XFER_INT,
 300                 USB_ENDPOINT_XFER_INT,
 301                 USB_ENDPOINT_XFER_INT,
 302 };
 303
 304 /* commonly used on newer SH-Mobile and R-Car SoCs */
 305 static u32 usbhsc_new_pipe_type[] = {
 306                 USB_ENDPOINT_XFER_CONTROL,
 307                 USB_ENDPOINT_XFER_ISOC,
 308                 USB_ENDPOINT_XFER_ISOC,
 309                 USB_ENDPOINT_XFER_BULK,
 310                 USB_ENDPOINT_XFER_BULK,
 311                 USB_ENDPOINT_XFER_BULK,
 312                 USB_ENDPOINT_XFER_INT,
 313                 USB_ENDPOINT_XFER_INT,
 314                 USB_ENDPOINT_XFER_INT,
 315                 USB_ENDPOINT_XFER_BULK,
 316                 USB_ENDPOINT_XFER_BULK,
 317                 USB_ENDPOINT_XFER_BULK,
 318                 USB_ENDPOINT_XFER_BULK,
 319                 USB_ENDPOINT_XFER_BULK,
 320                 USB_ENDPOINT_XFER_BULK,
 321                 USB_ENDPOINT_XFER_BULK,
 322 };
 323
 324 /*
 325  *              power control
 326  */
 327 static void usbhsc_power_ctrl(struct usbhs_priv *priv, int enable)
 328 {
 329         struct platform_device *pdev = usbhs_priv_to_pdev(priv);
 330         struct device *dev = usbhs_priv_to_dev(priv);
 331
 332         if (enable) {
 333                 /* enable PM */
 334                 pm_runtime_get_sync(dev);
 335
 336                 /* enable platform power */
 337                 usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable);
 338
 339                 /* USB on */
 340                 usbhs_sys_clock_ctrl(priv, enable);
 341         } else {
 342                 /* USB off */
 343                 usbhs_sys_clock_ctrl(priv, enable);
 344
 345                 /* disable platform power */
 346                 usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable);
 347
 348                 /* disable PM */
 349                 pm_runtime_put_sync(dev);
 350         }
 351 }
 352
 353 /*
 354  *              hotplug
 355  */
 356 static void usbhsc_hotplug(struct usbhs_priv *priv)
 357 {
 358         struct platform_device *pdev = usbhs_priv_to_pdev(priv);
 359         struct usbhs_mod *mod = usbhs_mod_get_current(priv);
 360         int id;
 361         int enable;
 362         int ret;
 363
 364         /*
 365          * get vbus status from platform
 366          */
 367         enable = usbhs_platform_call(priv, get_vbus, pdev);
 368
 369         /*
 370          * get id from platform
 371          */
 372         id = usbhs_platform_call(priv, get_id, pdev);
 373
 374         if (enable && !mod) {
 375                 ret = usbhs_mod_change(priv, id);
 376                 if (ret < 0)
 377                         return;
 378
 379                 dev_dbg(&pdev->dev, "%s enable\n", __func__);
 380
 381                 /* power on */
 382                 if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
 383                         usbhsc_power_ctrl(priv, enable);
 384
 385                 /* bus init */
 386                 usbhsc_set_buswait(priv);
 387                 usbhsc_bus_init(priv);
 388
 389                 /* module start */
 390                 usbhs_mod_call(priv, start, priv);
 391
 392         } else if (!enable && mod) {
 393                 dev_dbg(&pdev->dev, "%s disable\n", __func__);
 394
 395                 /* module stop */
 396                 usbhs_mod_call(priv, stop, priv);
 397
 398                 /* bus init */
 399                 usbhsc_bus_init(priv);
 400
 401                 /* power off */
 402                 if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
 403                         usbhsc_power_ctrl(priv, enable);
 404
 405                 usbhs_mod_change(priv, -1);
 406
 407                 /* reset phy for next connection */
 408                 usbhs_platform_call(priv, phy_reset, pdev);
 409         }
 410 }
 411
 412 /*
 413  *              notify hotplug
 414  */
 415 static void usbhsc_notify_hotplug(struct work_struct *work)
 416 {
 417         struct usbhs_priv *priv = container_of(work,
 418                                                struct usbhs_priv,
 419                                                notify_hotplug_work.work);
 420         usbhsc_hotplug(priv);
 421 }
 422
 423 static int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev)
 424 {
 425         struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
 426         int delay = usbhs_get_dparam(priv, detection_delay);
 427
 428         /*
 429          * This functions will be called in interrupt.
 430          * To make sure safety context,
 431          * use workqueue for usbhs_notify_hotplug
 432          */
 433         schedule_delayed_work(&priv->notify_hotplug_work,
 434                               msecs_to_jiffies(delay));
 435         return 0;
 436 }
 437
 438 /*
 439  *              platform functions
 440  */
 441 static int usbhs_probe(struct platform_device *pdev)
 442 {
 443         struct renesas_usbhs_platform_info *info = dev_get_platdata(&pdev->dev);
 444         struct renesas_usbhs_driver_callback *dfunc;
 445         struct usbhs_priv *priv;
 446         struct resource *res, *irq_res;
 447         int ret;
 448
 449         /* check platform information */
 450         if (!info) {
 451                 dev_err(&pdev->dev, "no platform information\n");
 452                 return -EINVAL;
 453         }
 454
 455         /* platform data */
 456         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 457         irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 458         if (!res || !irq_res) {
 459                 dev_err(&pdev->dev, "Not enough Renesas USB platform resources.\n");
 460                 return -ENODEV;
 461         }
 462
 463         /* usb private data */
 464         priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 465         if (!priv) {
 466                 dev_err(&pdev->dev, "Could not allocate priv\n");
 467                 return -ENOMEM;
 468         }
 469
 470         priv->base = devm_ioremap_resource(&pdev->dev, res);
 471         if (IS_ERR(priv->base))
 472                 return PTR_ERR(priv->base);
 473
 474         /*
 475          * care platform info
 476          */
 477
 478         memcpy(&priv->dparam,
 479                &info->driver_param,
 480                sizeof(struct renesas_usbhs_driver_param));
 481
 482         switch (priv->dparam.type) {
 483         case USBHS_TYPE_R8A7790:
 484         case USBHS_TYPE_R8A7791:
 485                 priv->pfunc = usbhs_rcar2_ops;
 486                 if (!priv->dparam.pipe_type) {
 487                         priv->dparam.pipe_type = usbhsc_new_pipe_type;
 488                         priv->dparam.pipe_size =
 489                                 ARRAY_SIZE(usbhsc_new_pipe_type);
 490                 }
 491                 break;
 492         default:
 493                 if (!info->platform_callback.get_id) {
 494                         dev_err(&pdev->dev, "no platform callbacks");
 495                         return -EINVAL;
 496                 }
 497                 memcpy(&priv->pfunc,
 498                        &info->platform_callback,
 499                        sizeof(struct renesas_usbhs_platform_callback));
 500                 break;
 501         }
 502
 503         /* set driver callback functions for platform */
 504         dfunc                   = &info->driver_callback;
 505         dfunc->notify_hotplug   = usbhsc_drvcllbck_notify_hotplug;
 506
 507         /* set default param if platform doesn't have */
 508         if (!priv->dparam.pipe_type) {
 509                 priv->dparam.pipe_type = usbhsc_default_pipe_type;
 510                 priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_default_pipe_type);
 511         }
 512         if (!priv->dparam.pio_dma_border)
 513                 priv->dparam.pio_dma_border = 64; /* 64byte */
 514
 515         /* FIXME */
 516         /* runtime power control ? */
 517         if (priv->pfunc.get_vbus)
 518                 usbhsc_flags_set(priv, USBHSF_RUNTIME_PWCTRL);
 519
 520         /*
 521          * priv settings
 522          */
 523         priv->irq       = irq_res->start;
 524         if (irq_res->flags & IORESOURCE_IRQ_SHAREABLE)
 525                 priv->irqflags = IRQF_SHARED;
 526         priv->pdev      = pdev;
 527         INIT_DELAYED_WORK(&priv->notify_hotplug_work, usbhsc_notify_hotplug);
 528         spin_lock_init(usbhs_priv_to_lock(priv));
 529
 530         /* call pipe and module init */
 531         ret = usbhs_pipe_probe(priv);
 532         if (ret < 0)
 533                 return ret;
 534
 535         ret = usbhs_fifo_probe(priv);
 536         if (ret < 0)
 537                 goto probe_end_pipe_exit;
 538
 539         ret = usbhs_mod_probe(priv);
 540         if (ret < 0)
 541                 goto probe_end_fifo_exit;
 542
 543         /* dev_set_drvdata should be called after usbhs_mod_init */
 544         platform_set_drvdata(pdev, priv);
 545
 546         /*
 547          * deviece reset here because
 548          * USB device might be used in boot loader.
 549          */
 550         usbhs_sys_clock_ctrl(priv, 0);
 551
 552         /* check GPIO determining if USB function should be enabled */
 553         if (priv->dparam.enable_gpio) {
 554                 gpio_request_one(priv->dparam.enable_gpio, GPIOF_IN, NULL);
 555                 ret = !gpio_get_value(priv->dparam.enable_gpio);
 556                 gpio_free(priv->dparam.enable_gpio);
 557                 if (ret) {
 558                         dev_warn(&pdev->dev,
 559                                  "USB function not selected (GPIO %d)\n",
 560                                  priv->dparam.enable_gpio);
 561                         ret = -ENOTSUPP;
 562                         goto probe_end_mod_exit;
 563                 }
 564         }
 565
 566         /*
 567          * platform call
 568          *
 569          * USB phy setup might depend on CPU/Board.
 570          * If platform has its callback functions,
 571          * call it here.
 572          */
 573         ret = usbhs_platform_call(priv, hardware_init, pdev);
 574         if (ret < 0) {
 575                 dev_err(&pdev->dev, "platform prove failed.\n");
 576                 goto probe_end_mod_exit;
 577         }
 578
 579         /* reset phy for connection */
 580         usbhs_platform_call(priv, phy_reset, pdev);
 581
 582         /* power control */
 583         pm_runtime_enable(&pdev->dev);
 584         if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) {
 585                 usbhsc_power_ctrl(priv, 1);
 586                 usbhs_mod_autonomy_mode(priv);
 587         }
 588
 589         /*
 590          * manual call notify_hotplug for cold plug
 591          */
 592         ret = usbhsc_drvcllbck_notify_hotplug(pdev);
 593         if (ret < 0)
 594                 goto probe_end_call_remove;
 595
 596         dev_info(&pdev->dev, "probed\n");
 597
 598         return ret;
 599
 600 probe_end_call_remove:
 601         usbhs_platform_call(priv, hardware_exit, pdev);
 602 probe_end_mod_exit:
 603         usbhs_mod_remove(priv);
 604 probe_end_fifo_exit:
 605         usbhs_fifo_remove(priv);
 606 probe_end_pipe_exit:
 607         usbhs_pipe_remove(priv);
 608
 609         dev_info(&pdev->dev, "probe failed\n");
 610
 611         return ret;
 612 }
 613
 614 static int usbhs_remove(struct platform_device *pdev)
 615 {
 616         struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
 617         struct renesas_usbhs_platform_info *info = dev_get_platdata(&pdev->dev);
 618         struct renesas_usbhs_driver_callback *dfunc = &info->driver_callback;
 619
 620         dev_dbg(&pdev->dev, "usb remove\n");
 621
 622         dfunc->notify_hotplug = NULL;
 623
 624         /* power off */
 625         if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
 626                 usbhsc_power_ctrl(priv, 0);
 627
 628         pm_runtime_disable(&pdev->dev);
 629
 630         usbhs_platform_call(priv, hardware_exit, pdev);
 631         usbhs_mod_remove(priv);
 632         usbhs_fifo_remove(priv);
 633         usbhs_pipe_remove(priv);
 634
 635         return 0;
 636 }
 637
 638 static int usbhsc_suspend(struct device *dev)
 639 {
 640         struct usbhs_priv *priv = dev_get_drvdata(dev);
 641         struct usbhs_mod *mod = usbhs_mod_get_current(priv);
 642
 643         if (mod) {
 644                 usbhs_mod_call(priv, stop, priv);
 645                 usbhs_mod_change(priv, -1);
 646         }
 647
 648         if (mod || !usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
 649                 usbhsc_power_ctrl(priv, 0);
 650
 651         return 0;
 652 }
 653
 654 static int usbhsc_resume(struct device *dev)
 655 {
 656         struct usbhs_priv *priv = dev_get_drvdata(dev);
 657         struct platform_device *pdev = usbhs_priv_to_pdev(priv);
 658
 659         if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
 660                 usbhsc_power_ctrl(priv, 1);
 661
 662         usbhs_platform_call(priv, phy_reset, pdev);
 663
 664         usbhsc_drvcllbck_notify_hotplug(pdev);
 665
 666         return 0;
 667 }
 668
 669 static int usbhsc_runtime_nop(struct device *dev)
 670 {
 671         /* Runtime PM callback shared between ->runtime_suspend()
 672          * and ->runtime_resume(). Simply returns success.
 673          *
 674          * This driver re-initializes all registers after
 675          * pm_runtime_get_sync() anyway so there is no need
 676          * to save and restore registers here.
 677          */
 678         return 0;
 679 }
 680
 681 static const struct dev_pm_ops usbhsc_pm_ops = {
 682         .suspend                = usbhsc_suspend,
 683         .resume                 = usbhsc_resume,
 684         .runtime_suspend        = usbhsc_runtime_nop,
 685         .runtime_resume         = usbhsc_runtime_nop,
 686 };
 687
 688 static struct platform_driver renesas_usbhs_driver = {
 689         .driver         = {
 690                 .name   = "renesas_usbhs",
 691                 .pm     = &usbhsc_pm_ops,
 692         },
 693         .probe          = usbhs_probe,
 694         .remove         = usbhs_remove,
 695 };
 696
 697 module_platform_driver(renesas_usbhs_driver);
 698
 699 MODULE_LICENSE("GPL");
 700 MODULE_DESCRIPTION("Renesas USB driver");
 701 MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>");