1 /* SPDX-License-Identifier: GPL-2.0 */
4 * xHCI host controller driver
6 * Copyright (C) 2008 Intel Corp.
9 * Some code borrowed from the Linux EHCI driver.
12 #ifndef __LINUX_XHCI_HCD_H
13 #define __LINUX_XHCI_HCD_H
15 #include <linux/usb.h>
16 #include <linux/timer.h>
17 #include <linux/kernel.h>
18 #include <linux/usb/hcd.h>
19 #include <linux/io-64-nonatomic-lo-hi.h>
21 /* Code sharing between pci-quirks and xhci hcd */
22 #include "xhci-ext-caps.h"
23 #include "pci-quirks.h"
25 /* max buffer size for trace and debug messages */
26 #define XHCI_MSG_MAX 500
28 /* xHCI PCI Configuration Registers */
29 #define XHCI_SBRN_OFFSET (0x60)
31 /* Max number of USB devices for any host controller - limit in section 6.1 */
32 #define MAX_HC_SLOTS 256
33 /* Section 5.3.3 - MaxPorts */
34 #define MAX_HC_PORTS 127
37 * xHCI register interface.
38 * This corresponds to the eXtensible Host Controller Interface (xHCI)
39 * Revision 0.95 specification
43 * struct xhci_cap_regs - xHCI Host Controller Capability Registers.
44 * @hc_capbase: length of the capabilities register and HC version number
45 * @hcs_params1: HCSPARAMS1 - Structural Parameters 1
46 * @hcs_params2: HCSPARAMS2 - Structural Parameters 2
47 * @hcs_params3: HCSPARAMS3 - Structural Parameters 3
48 * @hcc_params: HCCPARAMS - Capability Parameters
49 * @db_off: DBOFF - Doorbell array offset
50 * @run_regs_off: RTSOFF - Runtime register space offset
51 * @hcc_params2: HCCPARAMS2 Capability Parameters 2, xhci 1.1 only
53 struct xhci_cap_regs {
61 __le32 hcc_params2; /* xhci 1.1 */
62 /* Reserved up to (CAPLENGTH - 0x1C) */
65 /* hc_capbase bitmasks */
66 /* bits 7:0 - how long is the Capabilities register */
67 #define HC_LENGTH(p) XHCI_HC_LENGTH(p)
69 #define HC_VERSION(p) (((p) >> 16) & 0xffff)
71 /* HCSPARAMS1 - hcs_params1 - bitmasks */
72 /* bits 0:7, Max Device Slots */
73 #define HCS_MAX_SLOTS(p) (((p) >> 0) & 0xff)
74 #define HCS_SLOTS_MASK 0xff
75 /* bits 8:18, Max Interrupters */
76 #define HCS_MAX_INTRS(p) (((p) >> 8) & 0x7ff)
77 /* bits 24:31, Max Ports - max value is 0x7F = 127 ports */
78 #define HCS_MAX_PORTS(p) (((p) >> 24) & 0x7f)
80 /* HCSPARAMS2 - hcs_params2 - bitmasks */
81 /* bits 0:3, frames or uframes that SW needs to queue transactions
82 * ahead of the HW to meet periodic deadlines */
83 #define HCS_IST(p) (((p) >> 0) & 0xf)
84 /* bits 4:7, max number of Event Ring segments */
85 #define HCS_ERST_MAX(p) (((p) >> 4) & 0xf)
86 /* bits 21:25 Hi 5 bits of Scratchpad buffers SW must allocate for the HW */
87 /* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
88 /* bits 27:31 Lo 5 bits of Scratchpad buffers SW must allocate for the HW */
89 #define HCS_MAX_SCRATCHPAD(p) ((((p) >> 16) & 0x3e0) | (((p) >> 27) & 0x1f))
91 /* HCSPARAMS3 - hcs_params3 - bitmasks */
92 /* bits 0:7, Max U1 to U0 latency for the roothub ports */
93 #define HCS_U1_LATENCY(p) (((p) >> 0) & 0xff)
94 /* bits 16:31, Max U2 to U0 latency for the roothub ports */
95 #define HCS_U2_LATENCY(p) (((p) >> 16) & 0xffff)
97 /* HCCPARAMS - hcc_params - bitmasks */
98 /* true: HC can use 64-bit address pointers */
99 #define HCC_64BIT_ADDR(p) ((p) & (1 << 0))
100 /* true: HC can do bandwidth negotiation */
101 #define HCC_BANDWIDTH_NEG(p) ((p) & (1 << 1))
102 /* true: HC uses 64-byte Device Context structures
103 * FIXME 64-byte context structures aren't supported yet.
105 #define HCC_64BYTE_CONTEXT(p) ((p) & (1 << 2))
106 /* true: HC has port power switches */
107 #define HCC_PPC(p) ((p) & (1 << 3))
108 /* true: HC has port indicators */
109 #define HCS_INDICATOR(p) ((p) & (1 << 4))
110 /* true: HC has Light HC Reset Capability */
111 #define HCC_LIGHT_RESET(p) ((p) & (1 << 5))
112 /* true: HC supports latency tolerance messaging */
113 #define HCC_LTC(p) ((p) & (1 << 6))
114 /* true: no secondary Stream ID Support */
115 #define HCC_NSS(p) ((p) & (1 << 7))
116 /* true: HC supports Stopped - Short Packet */
117 #define HCC_SPC(p) ((p) & (1 << 9))
118 /* true: HC has Contiguous Frame ID Capability */
119 #define HCC_CFC(p) ((p) & (1 << 11))
120 /* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15 */
121 #define HCC_MAX_PSA(p) (1 << ((((p) >> 12) & 0xf) + 1))
122 /* Extended Capabilities pointer from PCI base - section 5.3.6 */
123 #define HCC_EXT_CAPS(p) XHCI_HCC_EXT_CAPS(p)
125 #define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32)
127 /* db_off bitmask - bits 0:1 reserved */
128 #define DBOFF_MASK (~0x3)
130 /* run_regs_off bitmask - bits 0:4 reserved */
131 #define RTSOFF_MASK (~0x1f)
133 /* HCCPARAMS2 - hcc_params2 - bitmasks */
134 /* true: HC supports U3 entry Capability */
135 #define HCC2_U3C(p) ((p) & (1 << 0))
136 /* true: HC supports Configure endpoint command Max exit latency too large */
137 #define HCC2_CMC(p) ((p) & (1 << 1))
138 /* true: HC supports Force Save context Capability */
139 #define HCC2_FSC(p) ((p) & (1 << 2))
140 /* true: HC supports Compliance Transition Capability */
141 #define HCC2_CTC(p) ((p) & (1 << 3))
142 /* true: HC support Large ESIT payload Capability > 48k */
143 #define HCC2_LEC(p) ((p) & (1 << 4))
144 /* true: HC support Configuration Information Capability */
145 #define HCC2_CIC(p) ((p) & (1 << 5))
146 /* true: HC support Extended TBC Capability, Isoc burst count > 65535 */
147 #define HCC2_ETC(p) ((p) & (1 << 6))
149 /* Number of registers per port */
150 #define NUM_PORT_REGS 4
158 * struct xhci_op_regs - xHCI Host Controller Operational Registers.
159 * @command: USBCMD - xHC command register
160 * @status: USBSTS - xHC status register
161 * @page_size: This indicates the page size that the host controller
162 * supports. If bit n is set, the HC supports a page size
163 * of 2^(n+12), up to a 128MB page size.
164 * 4K is the minimum page size.
165 * @cmd_ring: CRP - 64-bit Command Ring Pointer
166 * @dcbaa_ptr: DCBAAP - 64-bit Device Context Base Address Array Pointer
167 * @config_reg: CONFIG - Configure Register
168 * @port_status_base: PORTSCn - base address for Port Status and Control
169 * Each port has a Port Status and Control register,
170 * followed by a Port Power Management Status and Control
171 * register, a Port Link Info register, and a reserved
173 * @port_power_base: PORTPMSCn - base address for
174 * Port Power Management Status and Control
175 * @port_link_base: PORTLIn - base address for Port Link Info (current
176 * Link PM state and control) for USB 2.1 and USB 3.0
179 struct xhci_op_regs {
185 __le32 dev_notification;
187 /* rsvd: offset 0x20-2F */
191 /* rsvd: offset 0x3C-3FF */
192 __le32 reserved4[241];
193 /* port 1 registers, which serve as a base address for other ports */
194 __le32 port_status_base;
195 __le32 port_power_base;
196 __le32 port_link_base;
198 /* registers for ports 2-255 */
199 __le32 reserved6[NUM_PORT_REGS*254];
202 /* USBCMD - USB command - command bitmasks */
203 /* start/stop HC execution - do not write unless HC is halted*/
204 #define CMD_RUN XHCI_CMD_RUN
205 /* Reset HC - resets internal HC state machine and all registers (except
206 * PCI config regs). HC does NOT drive a USB reset on the downstream ports.
207 * The xHCI driver must reinitialize the xHC after setting this bit.
209 #define CMD_RESET (1 << 1)
210 /* Event Interrupt Enable - a '1' allows interrupts from the host controller */
211 #define CMD_EIE XHCI_CMD_EIE
212 /* Host System Error Interrupt Enable - get out-of-band signal for HC errors */
213 #define CMD_HSEIE XHCI_CMD_HSEIE
214 /* bits 4:6 are reserved (and should be preserved on writes). */
215 /* light reset (port status stays unchanged) - reset completed when this is 0 */
216 #define CMD_LRESET (1 << 7)
217 /* host controller save/restore state. */
218 #define CMD_CSS (1 << 8)
219 #define CMD_CRS (1 << 9)
220 /* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
221 #define CMD_EWE XHCI_CMD_EWE
222 /* MFINDEX power management - '1' means xHC can stop MFINDEX counter if all root
223 * hubs are in U3 (selective suspend), disconnect, disabled, or powered-off.
224 * '0' means the xHC can power it off if all ports are in the disconnect,
225 * disabled, or powered-off state.
227 #define CMD_PM_INDEX (1 << 11)
228 /* bit 14 Extended TBC Enable, changes Isoc TRB fields to support larger TBC */
229 #define CMD_ETE (1 << 14)
230 /* bits 15:31 are reserved (and should be preserved on writes). */
232 #define XHCI_RESET_LONG_USEC (10 * 1000 * 1000)
233 #define XHCI_RESET_SHORT_USEC (250 * 1000)
235 /* IMAN - Interrupt Management Register */
236 #define IMAN_IE (1 << 1)
237 #define IMAN_IP (1 << 0)
239 /* USBSTS - USB status - status bitmasks */
240 /* HC not running - set to 1 when run/stop bit is cleared. */
241 #define STS_HALT XHCI_STS_HALT
242 /* serious error, e.g. PCI parity error. The HC will clear the run/stop bit. */
243 #define STS_FATAL (1 << 2)
244 /* event interrupt - clear this prior to clearing any IP flags in IR set*/
245 #define STS_EINT (1 << 3)
246 /* port change detect */
247 #define STS_PORT (1 << 4)
248 /* bits 5:7 reserved and zeroed */
249 /* save state status - '1' means xHC is saving state */
250 #define STS_SAVE (1 << 8)
251 /* restore state status - '1' means xHC is restoring state */
252 #define STS_RESTORE (1 << 9)
253 /* true: save or restore error */
254 #define STS_SRE (1 << 10)
255 /* true: Controller Not Ready to accept doorbell or op reg writes after reset */
256 #define STS_CNR XHCI_STS_CNR
257 /* true: internal Host Controller Error - SW needs to reset and reinitialize */
258 #define STS_HCE (1 << 12)
259 /* bits 13:31 reserved and should be preserved */
262 * DNCTRL - Device Notification Control Register - dev_notification bitmasks
263 * Generate a device notification event when the HC sees a transaction with a
264 * notification type that matches a bit set in this bit field.
266 #define DEV_NOTE_MASK (0xffff)
267 #define ENABLE_DEV_NOTE(x) (1 << (x))
268 /* Most of the device notification types should only be used for debug.
269 * SW does need to pay attention to function wake notifications.
271 #define DEV_NOTE_FWAKE ENABLE_DEV_NOTE(1)
273 /* CRCR - Command Ring Control Register - cmd_ring bitmasks */
274 /* bit 0 is the command ring cycle state */
275 /* stop ring operation after completion of the currently executing command */
276 #define CMD_RING_PAUSE (1 << 1)
277 /* stop ring immediately - abort the currently executing command */
278 #define CMD_RING_ABORT (1 << 2)
279 /* true: command ring is running */
280 #define CMD_RING_RUNNING (1 << 3)
281 /* bits 4:5 reserved and should be preserved */
282 /* Command Ring pointer - bit mask for the lower 32 bits. */
283 #define CMD_RING_RSVD_BITS (0x3f)
285 /* CONFIG - Configure Register - config_reg bitmasks */
286 /* bits 0:7 - maximum number of device slots enabled (NumSlotsEn) */
287 #define MAX_DEVS(p) ((p) & 0xff)
288 /* bit 8: U3 Entry Enabled, assert PLC when root port enters U3, xhci 1.1 */
289 #define CONFIG_U3E (1 << 8)
290 /* bit 9: Configuration Information Enable, xhci 1.1 */
291 #define CONFIG_CIE (1 << 9)
292 /* bits 10:31 - reserved and should be preserved */
294 /* PORTSC - Port Status and Control Register - port_status_base bitmasks */
295 /* true: device connected */
296 #define PORT_CONNECT (1 << 0)
297 /* true: port enabled */
298 #define PORT_PE (1 << 1)
299 /* bit 2 reserved and zeroed */
300 /* true: port has an over-current condition */
301 #define PORT_OC (1 << 3)
302 /* true: port reset signaling asserted */
303 #define PORT_RESET (1 << 4)
304 /* Port Link State - bits 5:8
305 * A read gives the current link PM state of the port,
306 * a write with Link State Write Strobe set sets the link state.
308 #define PORT_PLS_MASK (0xf << 5)
309 #define XDEV_U0 (0x0 << 5)
310 #define XDEV_U1 (0x1 << 5)
311 #define XDEV_U2 (0x2 << 5)
312 #define XDEV_U3 (0x3 << 5)
313 #define XDEV_DISABLED (0x4 << 5)
314 #define XDEV_RXDETECT (0x5 << 5)
315 #define XDEV_INACTIVE (0x6 << 5)
316 #define XDEV_POLLING (0x7 << 5)
317 #define XDEV_RECOVERY (0x8 << 5)
318 #define XDEV_HOT_RESET (0x9 << 5)
319 #define XDEV_COMP_MODE (0xa << 5)
320 #define XDEV_TEST_MODE (0xb << 5)
321 #define XDEV_RESUME (0xf << 5)
323 /* true: port has power (see HCC_PPC) */
324 #define PORT_POWER (1 << 9)
325 /* bits 10:13 indicate device speed:
326 * 0 - undefined speed - port hasn't be initialized by a reset yet
333 #define DEV_SPEED_MASK (0xf << 10)
334 #define XDEV_FS (0x1 << 10)
335 #define XDEV_LS (0x2 << 10)
336 #define XDEV_HS (0x3 << 10)
337 #define XDEV_SS (0x4 << 10)
338 #define XDEV_SSP (0x5 << 10)
339 #define DEV_UNDEFSPEED(p) (((p) & DEV_SPEED_MASK) == (0x0<<10))
340 #define DEV_FULLSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_FS)
341 #define DEV_LOWSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_LS)
342 #define DEV_HIGHSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_HS)
343 #define DEV_SUPERSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_SS)
344 #define DEV_SUPERSPEEDPLUS(p) (((p) & DEV_SPEED_MASK) == XDEV_SSP)
345 #define DEV_SUPERSPEED_ANY(p) (((p) & DEV_SPEED_MASK) >= XDEV_SS)
346 #define DEV_PORT_SPEED(p) (((p) >> 10) & 0x0f)
348 /* Bits 20:23 in the Slot Context are the speed for the device */
349 #define SLOT_SPEED_FS (XDEV_FS << 10)
350 #define SLOT_SPEED_LS (XDEV_LS << 10)
351 #define SLOT_SPEED_HS (XDEV_HS << 10)
352 #define SLOT_SPEED_SS (XDEV_SS << 10)
353 #define SLOT_SPEED_SSP (XDEV_SSP << 10)
354 /* Port Indicator Control */
355 #define PORT_LED_OFF (0 << 14)
356 #define PORT_LED_AMBER (1 << 14)
357 #define PORT_LED_GREEN (2 << 14)
358 #define PORT_LED_MASK (3 << 14)
359 /* Port Link State Write Strobe - set this when changing link state */
360 #define PORT_LINK_STROBE (1 << 16)
361 /* true: connect status change */
362 #define PORT_CSC (1 << 17)
363 /* true: port enable change */
364 #define PORT_PEC (1 << 18)
365 /* true: warm reset for a USB 3.0 device is done. A "hot" reset puts the port
366 * into an enabled state, and the device into the default state. A "warm" reset
367 * also resets the link, forcing the device through the link training sequence.
368 * SW can also look at the Port Reset register to see when warm reset is done.
370 #define PORT_WRC (1 << 19)
371 /* true: over-current change */
372 #define PORT_OCC (1 << 20)
373 /* true: reset change - 1 to 0 transition of PORT_RESET */
374 #define PORT_RC (1 << 21)
375 /* port link status change - set on some port link state transitions:
377 * ------------------------------------------------------------------------------
378 * - U3 to Resume Wakeup signaling from a device
379 * - Resume to Recovery to U0 USB 3.0 device resume
380 * - Resume to U0 USB 2.0 device resume
381 * - U3 to Recovery to U0 Software resume of USB 3.0 device complete
382 * - U3 to U0 Software resume of USB 2.0 device complete
383 * - U2 to U0 L1 resume of USB 2.1 device complete
384 * - U0 to U0 (???) L1 entry rejection by USB 2.1 device
385 * - U0 to disabled L1 entry error with USB 2.1 device
386 * - Any state to inactive Error on USB 3.0 port
388 #define PORT_PLC (1 << 22)
389 /* port configure error change - port failed to configure its link partner */
390 #define PORT_CEC (1 << 23)
391 #define PORT_CHANGE_MASK (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \
392 PORT_RC | PORT_PLC | PORT_CEC)
395 /* Cold Attach Status - xHC can set this bit to report device attached during
396 * Sx state. Warm port reset should be perfomed to clear this bit and move port
397 * to connected state.
399 #define PORT_CAS (1 << 24)
400 /* wake on connect (enable) */
401 #define PORT_WKCONN_E (1 << 25)
402 /* wake on disconnect (enable) */
403 #define PORT_WKDISC_E (1 << 26)
404 /* wake on over-current (enable) */
405 #define PORT_WKOC_E (1 << 27)
406 /* bits 28:29 reserved */
407 /* true: device is non-removable - for USB 3.0 roothub emulation */
408 #define PORT_DEV_REMOVE (1 << 30)
409 /* Initiate a warm port reset - complete when PORT_WRC is '1' */
410 #define PORT_WR (1 << 31)
412 /* We mark duplicate entries with -1 */
413 #define DUPLICATE_ENTRY ((u8)(-1))
415 /* Port Power Management Status and Control - port_power_base bitmasks */
416 /* Inactivity timer value for transitions into U1, in microseconds.
417 * Timeout can be up to 127us. 0xFF means an infinite timeout.
419 #define PORT_U1_TIMEOUT(p) ((p) & 0xff)
420 #define PORT_U1_TIMEOUT_MASK 0xff
421 /* Inactivity timer value for transitions into U2 */
422 #define PORT_U2_TIMEOUT(p) (((p) & 0xff) << 8)
423 #define PORT_U2_TIMEOUT_MASK (0xff << 8)
424 /* Bits 24:31 for port testing */
426 /* USB2 Protocol PORTSPMSC */
427 #define PORT_L1S_MASK 7
428 #define PORT_L1S_SUCCESS 1
429 #define PORT_RWE (1 << 3)
430 #define PORT_HIRD(p) (((p) & 0xf) << 4)
431 #define PORT_HIRD_MASK (0xf << 4)
432 #define PORT_L1DS_MASK (0xff << 8)
433 #define PORT_L1DS(p) (((p) & 0xff) << 8)
434 #define PORT_HLE (1 << 16)
435 #define PORT_TEST_MODE_SHIFT 28
437 /* USB3 Protocol PORTLI Port Link Information */
438 #define PORT_RX_LANES(p) (((p) >> 16) & 0xf)
439 #define PORT_TX_LANES(p) (((p) >> 20) & 0xf)
441 /* USB2 Protocol PORTHLPMC */
442 #define PORT_HIRDM(p)((p) & 3)
443 #define PORT_L1_TIMEOUT(p)(((p) & 0xff) << 2)
444 #define PORT_BESLD(p)(((p) & 0xf) << 10)
446 /* use 512 microseconds as USB2 LPM L1 default timeout. */
447 #define XHCI_L1_TIMEOUT 512
449 /* Set default HIRD/BESL value to 4 (350/400us) for USB2 L1 LPM resume latency.
450 * Safe to use with mixed HIRD and BESL systems (host and device) and is used
451 * by other operating systems.
453 * XHCI 1.0 errata 8/14/12 Table 13 notes:
454 * "Software should choose xHC BESL/BESLD field values that do not violate a
455 * device's resume latency requirements,
456 * e.g. not program values > '4' if BLC = '1' and a HIRD device is attached,
457 * or not program values < '4' if BLC = '0' and a BESL device is attached.
459 #define XHCI_DEFAULT_BESL 4
462 * USB3 specification define a 360ms tPollingLFPSTiemout for USB3 ports
463 * to complete link training. usually link trainig completes much faster
464 * so check status 10 times with 36ms sleep in places we need to wait for
465 * polling to complete.
467 #define XHCI_PORT_POLLING_LFPS_TIME 36
470 * struct xhci_intr_reg - Interrupt Register Set
471 * @irq_pending: IMAN - Interrupt Management Register. Used to enable
472 * interrupts and check for pending interrupts.
473 * @irq_control: IMOD - Interrupt Moderation Register.
474 * Used to throttle interrupts.
475 * @erst_size: Number of segments in the Event Ring Segment Table (ERST).
476 * @erst_base: ERST base address.
477 * @erst_dequeue: Event ring dequeue pointer.
479 * Each interrupter (defined by a MSI-X vector) has an event ring and an Event
480 * Ring Segment Table (ERST) associated with it. The event ring is comprised of
481 * multiple segments of the same size. The HC places events on the ring and
482 * "updates the Cycle bit in the TRBs to indicate to software the current
483 * position of the Enqueue Pointer." The HCD (Linux) processes those events and
484 * updates the dequeue pointer.
486 struct xhci_intr_reg {
495 /* irq_pending bitmasks */
496 #define ER_IRQ_PENDING(p) ((p) & 0x1)
497 /* bits 2:31 need to be preserved */
498 /* THIS IS BUGGY - FIXME - IP IS WRITE 1 TO CLEAR */
499 #define ER_IRQ_CLEAR(p) ((p) & 0xfffffffe)
500 #define ER_IRQ_ENABLE(p) ((ER_IRQ_CLEAR(p)) | 0x2)
501 #define ER_IRQ_DISABLE(p) ((ER_IRQ_CLEAR(p)) & ~(0x2))
503 /* irq_control bitmasks */
504 /* Minimum interval between interrupts (in 250ns intervals). The interval
505 * between interrupts will be longer if there are no events on the event ring.
506 * Default is 4000 (1 ms).
508 #define ER_IRQ_INTERVAL_MASK (0xffff)
509 /* Counter used to count down the time to the next interrupt - HW use only */
510 #define ER_IRQ_COUNTER_MASK (0xffff << 16)
512 /* erst_size bitmasks */
513 /* Preserve bits 16:31 of erst_size */
514 #define ERST_SIZE_MASK (0xffff << 16)
516 /* erst_dequeue bitmasks */
517 /* Dequeue ERST Segment Index (DESI) - Segment number (or alias)
518 * where the current dequeue pointer lies. This is an optional HW hint.
520 #define ERST_DESI_MASK (0x7)
521 /* Event Handler Busy (EHB) - is the event ring scheduled to be serviced by
522 * a work queue (or delayed service routine)?
524 #define ERST_EHB (1 << 3)
525 #define ERST_PTR_MASK (0xf)
528 * struct xhci_run_regs
530 * MFINDEX - current microframe number
532 * Section 5.5 Host Controller Runtime Registers:
533 * "Software should read and write these registers using only Dword (32 bit)
534 * or larger accesses"
536 struct xhci_run_regs {
537 __le32 microframe_index;
539 struct xhci_intr_reg ir_set[128];
543 * struct doorbell_array
545 * Bits 0 - 7: Endpoint target
547 * Bits 16 - 31: Stream ID
551 struct xhci_doorbell_array {
552 __le32 doorbell[256];
555 #define DB_VALUE(ep, stream) ((((ep) + 1) & 0xff) | ((stream) << 16))
556 #define DB_VALUE_HOST 0x00000000
559 * struct xhci_protocol_caps
560 * @revision: major revision, minor revision, capability ID,
561 * and next capability pointer.
562 * @name_string: Four ASCII characters to say which spec this xHC
563 * follows, typically "USB ".
564 * @port_info: Port offset, count, and protocol-defined information.
566 struct xhci_protocol_caps {
572 #define XHCI_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff)
573 #define XHCI_EXT_PORT_MINOR(x) (((x) >> 16) & 0xff)
574 #define XHCI_EXT_PORT_PSIC(x) (((x) >> 28) & 0x0f)
575 #define XHCI_EXT_PORT_OFF(x) ((x) & 0xff)
576 #define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff)
578 #define XHCI_EXT_PORT_PSIV(x) (((x) >> 0) & 0x0f)
579 #define XHCI_EXT_PORT_PSIE(x) (((x) >> 4) & 0x03)
580 #define XHCI_EXT_PORT_PLT(x) (((x) >> 6) & 0x03)
581 #define XHCI_EXT_PORT_PFD(x) (((x) >> 8) & 0x01)
582 #define XHCI_EXT_PORT_LP(x) (((x) >> 14) & 0x03)
583 #define XHCI_EXT_PORT_PSIM(x) (((x) >> 16) & 0xffff)
585 #define PLT_MASK (0x03 << 6)
586 #define PLT_SYM (0x00 << 6)
587 #define PLT_ASYM_RX (0x02 << 6)
588 #define PLT_ASYM_TX (0x03 << 6)
591 * struct xhci_container_ctx
592 * @type: Type of context. Used to calculated offsets to contained contexts.
593 * @size: Size of the context data
594 * @bytes: The raw context data given to HW
595 * @dma: dma address of the bytes
597 * Represents either a Device or Input context. Holds a pointer to the raw
598 * memory used for the context (bytes) and dma address of it (dma).
600 struct xhci_container_ctx {
602 #define XHCI_CTX_TYPE_DEVICE 0x1
603 #define XHCI_CTX_TYPE_INPUT 0x2
612 * struct xhci_slot_ctx
613 * @dev_info: Route string, device speed, hub info, and last valid endpoint
614 * @dev_info2: Max exit latency for device number, root hub port number
615 * @tt_info: tt_info is used to construct split transaction tokens
616 * @dev_state: slot state and device address
618 * Slot Context - section 6.2.1.1. This assumes the HC uses 32-byte context
619 * structures. If the HC uses 64-byte contexts, there is an additional 32 bytes
620 * reserved at the end of the slot context for HC internal use.
622 struct xhci_slot_ctx {
627 /* offset 0x10 to 0x1f reserved for HC internal use */
631 /* dev_info bitmasks */
632 /* Route String - 0:19 */
633 #define ROUTE_STRING_MASK (0xfffff)
634 /* Device speed - values defined by PORTSC Device Speed field - 20:23 */
635 #define DEV_SPEED (0xf << 20)
636 #define GET_DEV_SPEED(n) (((n) & DEV_SPEED) >> 20)
637 /* bit 24 reserved */
638 /* Is this LS/FS device connected through a HS hub? - bit 25 */
639 #define DEV_MTT (0x1 << 25)
640 /* Set if the device is a hub - bit 26 */
641 #define DEV_HUB (0x1 << 26)
642 /* Index of the last valid endpoint context in this device context - 27:31 */
643 #define LAST_CTX_MASK (0x1f << 27)
644 #define LAST_CTX(p) ((p) << 27)
645 #define LAST_CTX_TO_EP_NUM(p) (((p) >> 27) - 1)
646 #define SLOT_FLAG (1 << 0)
647 #define EP0_FLAG (1 << 1)
649 /* dev_info2 bitmasks */
650 /* Max Exit Latency (ms) - worst case time to wake up all links in dev path */
651 #define MAX_EXIT (0xffff)
652 /* Root hub port number that is needed to access the USB device */
653 #define ROOT_HUB_PORT(p) (((p) & 0xff) << 16)
654 #define DEVINFO_TO_ROOT_HUB_PORT(p) (((p) >> 16) & 0xff)
655 /* Maximum number of ports under a hub device */
656 #define XHCI_MAX_PORTS(p) (((p) & 0xff) << 24)
657 #define DEVINFO_TO_MAX_PORTS(p) (((p) & (0xff << 24)) >> 24)
659 /* tt_info bitmasks */
661 * TT Hub Slot ID - for low or full speed devices attached to a high-speed hub
662 * The Slot ID of the hub that isolates the high speed signaling from
663 * this low or full-speed device. '0' if attached to root hub port.
665 #define TT_SLOT (0xff)
667 * The number of the downstream facing port of the high-speed hub
668 * '0' if the device is not low or full speed.
670 #define TT_PORT (0xff << 8)
671 #define TT_THINK_TIME(p) (((p) & 0x3) << 16)
672 #define GET_TT_THINK_TIME(p) (((p) & (0x3 << 16)) >> 16)
674 /* dev_state bitmasks */
675 /* USB device address - assigned by the HC */
676 #define DEV_ADDR_MASK (0xff)
677 /* bits 8:26 reserved */
679 #define SLOT_STATE (0x1f << 27)
680 #define GET_SLOT_STATE(p) (((p) & (0x1f << 27)) >> 27)
682 #define SLOT_STATE_DISABLED 0
683 #define SLOT_STATE_ENABLED SLOT_STATE_DISABLED
684 #define SLOT_STATE_DEFAULT 1
685 #define SLOT_STATE_ADDRESSED 2
686 #define SLOT_STATE_CONFIGURED 3
690 * @ep_info: endpoint state, streams, mult, and interval information.
691 * @ep_info2: information on endpoint type, max packet size, max burst size,
692 * error count, and whether the HC will force an event for all
694 * @deq: 64-bit ring dequeue pointer address. If the endpoint only
695 * defines one stream, this points to the endpoint transfer ring.
696 * Otherwise, it points to a stream context array, which has a
697 * ring pointer for each flow.
699 * Average TRB lengths for the endpoint ring and
700 * max payload within an Endpoint Service Interval Time (ESIT).
702 * Endpoint Context - section 6.2.1.2. This assumes the HC uses 32-byte context
703 * structures. If the HC uses 64-byte contexts, there is an additional 32 bytes
704 * reserved at the end of the endpoint context for HC internal use.
711 /* offset 0x14 - 0x1f reserved for HC internal use */
715 /* ep_info bitmasks */
717 * Endpoint State - bits 0:2
720 * 2 - halted due to halt condition - ok to manipulate endpoint ring
725 #define EP_STATE_MASK (0x7)
726 #define EP_STATE_DISABLED 0
727 #define EP_STATE_RUNNING 1
728 #define EP_STATE_HALTED 2
729 #define EP_STATE_STOPPED 3
730 #define EP_STATE_ERROR 4
731 #define GET_EP_CTX_STATE(ctx) (le32_to_cpu((ctx)->ep_info) & EP_STATE_MASK)
733 /* Mult - Max number of burtst within an interval, in EP companion desc. */
734 #define EP_MULT(p) (((p) & 0x3) << 8)
735 #define CTX_TO_EP_MULT(p) (((p) >> 8) & 0x3)
736 /* bits 10:14 are Max Primary Streams */
737 /* bit 15 is Linear Stream Array */
738 /* Interval - period between requests to an endpoint - 125u increments. */
739 #define EP_INTERVAL(p) (((p) & 0xff) << 16)
740 #define EP_INTERVAL_TO_UFRAMES(p) (1 << (((p) >> 16) & 0xff))
741 #define CTX_TO_EP_INTERVAL(p) (((p) >> 16) & 0xff)
742 #define EP_MAXPSTREAMS_MASK (0x1f << 10)
743 #define EP_MAXPSTREAMS(p) (((p) << 10) & EP_MAXPSTREAMS_MASK)
744 #define CTX_TO_EP_MAXPSTREAMS(p) (((p) & EP_MAXPSTREAMS_MASK) >> 10)
745 /* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */
746 #define EP_HAS_LSA (1 << 15)
747 /* hosts with LEC=1 use bits 31:24 as ESIT high bits. */
748 #define CTX_TO_MAX_ESIT_PAYLOAD_HI(p) (((p) >> 24) & 0xff)
750 /* ep_info2 bitmasks */
752 * Force Event - generate transfer events for all TRBs for this endpoint
753 * This will tell the HC to ignore the IOC and ISP flags (for debugging only).
755 #define FORCE_EVENT (0x1)
756 #define ERROR_COUNT(p) (((p) & 0x3) << 1)
757 #define CTX_TO_EP_TYPE(p) (((p) >> 3) & 0x7)
758 #define EP_TYPE(p) ((p) << 3)
759 #define ISOC_OUT_EP 1
760 #define BULK_OUT_EP 2
767 /* bit 7 is Host Initiate Disable - for disabling stream selection */
768 #define MAX_BURST(p) (((p)&0xff) << 8)
769 #define CTX_TO_MAX_BURST(p) (((p) >> 8) & 0xff)
770 #define MAX_PACKET(p) (((p)&0xffff) << 16)
771 #define MAX_PACKET_MASK (0xffff << 16)
772 #define MAX_PACKET_DECODED(p) (((p) >> 16) & 0xffff)
774 /* tx_info bitmasks */
775 #define EP_AVG_TRB_LENGTH(p) ((p) & 0xffff)
776 #define EP_MAX_ESIT_PAYLOAD_LO(p) (((p) & 0xffff) << 16)
777 #define EP_MAX_ESIT_PAYLOAD_HI(p) ((((p) >> 16) & 0xff) << 24)
778 #define CTX_TO_MAX_ESIT_PAYLOAD(p) (((p) >> 16) & 0xffff)
781 #define EP_CTX_CYCLE_MASK (1 << 0)
782 #define SCTX_DEQ_MASK (~0xfL)
786 * struct xhci_input_control_context
787 * Input control context; see section 6.2.5.
789 * @drop_context: set the bit of the endpoint context you want to disable
790 * @add_context: set the bit of the endpoint context you want to enable
792 struct xhci_input_control_ctx {
798 #define EP_IS_ADDED(ctrl_ctx, i) \
799 (le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1)))
800 #define EP_IS_DROPPED(ctrl_ctx, i) \
801 (le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1)))
803 /* Represents everything that is needed to issue a command on the command ring.
804 * It's useful to pre-allocate these for commands that cannot fail due to
805 * out-of-memory errors, like freeing streams.
807 struct xhci_command {
808 /* Input context for changing device state */
809 struct xhci_container_ctx *in_ctx;
812 /* If completion is null, no one is waiting on this command
813 * and the structure can be freed after the command completes.
815 struct completion *completion;
816 union xhci_trb *command_trb;
817 struct list_head cmd_list;
820 /* drop context bitmasks */
821 #define DROP_EP(x) (0x1 << x)
822 /* add context bitmasks */
823 #define ADD_EP(x) (0x1 << x)
825 struct xhci_stream_ctx {
826 /* 64-bit stream ring address, cycle state, and stream type */
828 /* offset 0x14 - 0x1f reserved for HC internal use */
832 /* Stream Context Types (section 6.4.1) - bits 3:1 of stream ctx deq ptr */
833 #define SCT_FOR_CTX(p) (((p) & 0x7) << 1)
834 /* Secondary stream array type, dequeue pointer is to a transfer ring */
836 /* Primary stream array type, dequeue pointer is to a transfer ring */
838 /* Dequeue pointer is for a secondary stream array (SSA) with 8 entries */
843 #define SCT_SSA_128 6
844 #define SCT_SSA_256 7
846 /* Assume no secondary streams for now */
847 struct xhci_stream_info {
848 struct xhci_ring **stream_rings;
849 /* Number of streams, including stream 0 (which drivers can't use) */
850 unsigned int num_streams;
851 /* The stream context array may be bigger than
852 * the number of streams the driver asked for
854 struct xhci_stream_ctx *stream_ctx_array;
855 unsigned int num_stream_ctxs;
856 dma_addr_t ctx_array_dma;
857 /* For mapping physical TRB addresses to segments in stream rings */
858 struct radix_tree_root trb_address_map;
859 struct xhci_command *free_streams_command;
862 #define SMALL_STREAM_ARRAY_SIZE 256
863 #define MEDIUM_STREAM_ARRAY_SIZE 1024
865 /* Some Intel xHCI host controllers need software to keep track of the bus
866 * bandwidth. Keep track of endpoint info here. Each root port is allocated
867 * the full bus bandwidth. We must also treat TTs (including each port under a
868 * multi-TT hub) as a separate bandwidth domain. The direct memory interface
869 * (DMI) also limits the total bandwidth (across all domains) that can be used.
871 struct xhci_bw_info {
872 /* ep_interval is zero-based */
873 unsigned int ep_interval;
874 /* mult and num_packets are one-based */
876 unsigned int num_packets;
877 unsigned int max_packet_size;
878 unsigned int max_esit_payload;
882 /* "Block" sizes in bytes the hardware uses for different device speeds.
883 * The logic in this part of the hardware limits the number of bits the hardware
884 * can use, so must represent bandwidth in a less precise manner to mimic what
885 * the scheduler hardware computes.
892 /* Each device speed has a protocol overhead (CRC, bit stuffing, etc) associated
893 * with each byte transferred. SuperSpeed devices have an initial overhead to
894 * set up bursts. These are in blocks, see above. LS overhead has already been
895 * translated into FS blocks.
897 #define DMI_OVERHEAD 8
898 #define DMI_OVERHEAD_BURST 4
899 #define SS_OVERHEAD 8
900 #define SS_OVERHEAD_BURST 32
901 #define HS_OVERHEAD 26
902 #define FS_OVERHEAD 20
903 #define LS_OVERHEAD 128
904 /* The TTs need to claim roughly twice as much bandwidth (94 bytes per
905 * microframe ~= 24Mbps) of the HS bus as the devices can actually use because
906 * of overhead associated with split transfers crossing microframe boundaries.
907 * 31 blocks is pure protocol overhead.
909 #define TT_HS_OVERHEAD (31 + 94)
910 #define TT_DMI_OVERHEAD (25 + 12)
912 /* Bandwidth limits in blocks */
913 #define FS_BW_LIMIT 1285
914 #define TT_BW_LIMIT 1320
915 #define HS_BW_LIMIT 1607
916 #define SS_BW_LIMIT_IN 3906
917 #define DMI_BW_LIMIT_IN 3906
918 #define SS_BW_LIMIT_OUT 3906
919 #define DMI_BW_LIMIT_OUT 3906
921 /* Percentage of bus bandwidth reserved for non-periodic transfers */
922 #define FS_BW_RESERVED 10
923 #define HS_BW_RESERVED 20
924 #define SS_BW_RESERVED 10
926 struct xhci_virt_ep {
927 struct xhci_virt_device *vdev; /* parent */
928 unsigned int ep_index;
929 struct xhci_ring *ring;
930 /* Related to endpoints that are configured to use stream IDs only */
931 struct xhci_stream_info *stream_info;
932 /* Temporary storage in case the configure endpoint command fails and we
933 * have to restore the device state to the previous state
935 struct xhci_ring *new_ring;
936 unsigned int ep_state;
937 #define SET_DEQ_PENDING (1 << 0)
938 #define EP_HALTED (1 << 1) /* For stall handling */
939 #define EP_STOP_CMD_PENDING (1 << 2) /* For URB cancellation */
940 /* Transitioning the endpoint to using streams, don't enqueue URBs */
941 #define EP_GETTING_STREAMS (1 << 3)
942 #define EP_HAS_STREAMS (1 << 4)
943 /* Transitioning the endpoint to not using streams, don't enqueue URBs */
944 #define EP_GETTING_NO_STREAMS (1 << 5)
945 #define EP_HARD_CLEAR_TOGGLE (1 << 6)
946 #define EP_SOFT_CLEAR_TOGGLE (1 << 7)
947 /* usb_hub_clear_tt_buffer is in progress */
948 #define EP_CLEARING_TT (1 << 8)
949 /* ---- Related to URB cancellation ---- */
950 struct list_head cancelled_td_list;
951 /* Watchdog timer for stop endpoint command to cancel URBs */
952 struct timer_list stop_cmd_timer;
953 struct xhci_hcd *xhci;
954 /* Dequeue pointer and dequeue segment for a submitted Set TR Dequeue
955 * command. We'll need to update the ring's dequeue segment and dequeue
956 * pointer after the command completes.
958 struct xhci_segment *queued_deq_seg;
959 union xhci_trb *queued_deq_ptr;
961 * Sometimes the xHC can not process isochronous endpoint ring quickly
962 * enough, and it will miss some isoc tds on the ring and generate
963 * a Missed Service Error Event.
964 * Set skip flag when receive a Missed Service Error Event and
965 * process the missed tds on the endpoint ring.
968 /* Bandwidth checking storage */
969 struct xhci_bw_info bw_info;
970 struct list_head bw_endpoint_list;
971 /* Isoch Frame ID checking storage */
973 /* Use new Isoch TRB layout needed for extended TBC support */
974 bool use_extended_tbc;
977 enum xhci_overhead_type {
978 LS_OVERHEAD_TYPE = 0,
983 struct xhci_interval_bw {
984 unsigned int num_packets;
985 /* Sorted by max packet size.
986 * Head of the list is the greatest max packet size.
988 struct list_head endpoints;
989 /* How many endpoints of each speed are present. */
990 unsigned int overhead[3];
993 #define XHCI_MAX_INTERVAL 16
995 struct xhci_interval_bw_table {
996 unsigned int interval0_esit_payload;
997 struct xhci_interval_bw interval_bw[XHCI_MAX_INTERVAL];
998 /* Includes reserved bandwidth for async endpoints */
999 unsigned int bw_used;
1000 unsigned int ss_bw_in;
1001 unsigned int ss_bw_out;
1004 #define EP_CTX_PER_DEV 31
1006 struct xhci_virt_device {
1008 struct usb_device *udev;
1010 * Commands to the hardware are passed an "input context" that
1011 * tells the hardware what to change in its data structures.
1012 * The hardware will return changes in an "output context" that
1013 * software must allocate for the hardware. We need to keep
1014 * track of input and output contexts separately because
1015 * these commands might fail and we don't trust the hardware.
1017 struct xhci_container_ctx *out_ctx;
1018 /* Used for addressing devices and configuration changes */
1019 struct xhci_container_ctx *in_ctx;
1020 struct xhci_virt_ep eps[EP_CTX_PER_DEV];
1023 struct xhci_interval_bw_table *bw_table;
1024 struct xhci_tt_bw_info *tt_info;
1026 * flags for state tracking based on events and issued commands.
1027 * Software can not rely on states from output contexts because of
1028 * latency between events and xHC updating output context values.
1029 * See xhci 1.1 section 4.8.3 for more details
1031 unsigned long flags;
1032 #define VDEV_PORT_ERROR BIT(0) /* Port error, link inactive */
1034 /* The current max exit latency for the enabled USB3 link states. */
1036 /* Used for the debugfs interfaces. */
1037 void *debugfs_private;
1041 * For each roothub, keep track of the bandwidth information for each periodic
1044 * If a high speed hub is attached to the roothub, each TT associated with that
1045 * hub is a separate bandwidth domain. The interval information for the
1046 * endpoints on the devices under that TT will appear in the TT structure.
1048 struct xhci_root_port_bw_info {
1049 struct list_head tts;
1050 unsigned int num_active_tts;
1051 struct xhci_interval_bw_table bw_table;
1054 struct xhci_tt_bw_info {
1055 struct list_head tt_list;
1058 struct xhci_interval_bw_table bw_table;
1064 * struct xhci_device_context_array
1065 * @dev_context_ptr array of 64-bit DMA addresses for device contexts
1067 struct xhci_device_context_array {
1068 /* 64-bit device addresses; we only write 32-bit addresses */
1069 __le64 dev_context_ptrs[MAX_HC_SLOTS];
1070 /* private xHCD pointers */
1073 /* TODO: write function to set the 64-bit device DMA address */
1075 * TODO: change this to be dynamically sized at HC mem init time since the HC
1076 * might not be able to handle the maximum number of devices possible.
1080 struct xhci_transfer_event {
1081 /* 64-bit buffer address, or immediate data */
1083 __le32 transfer_len;
1084 /* This field is interpreted differently based on the type of TRB */
1088 /* Transfer event TRB length bit mask */
1090 #define EVENT_TRB_LEN(p) ((p) & 0xffffff)
1092 /** Transfer Event bit fields **/
1093 #define TRB_TO_EP_ID(p) (((p) >> 16) & 0x1f)
1095 /* Completion Code - only applicable for some types of TRBs */
1096 #define COMP_CODE_MASK (0xff << 24)
1097 #define GET_COMP_CODE(p) (((p) & COMP_CODE_MASK) >> 24)
1098 #define COMP_INVALID 0
1099 #define COMP_SUCCESS 1
1100 #define COMP_DATA_BUFFER_ERROR 2
1101 #define COMP_BABBLE_DETECTED_ERROR 3
1102 #define COMP_USB_TRANSACTION_ERROR 4
1103 #define COMP_TRB_ERROR 5
1104 #define COMP_STALL_ERROR 6
1105 #define COMP_RESOURCE_ERROR 7
1106 #define COMP_BANDWIDTH_ERROR 8
1107 #define COMP_NO_SLOTS_AVAILABLE_ERROR 9
1108 #define COMP_INVALID_STREAM_TYPE_ERROR 10
1109 #define COMP_SLOT_NOT_ENABLED_ERROR 11
1110 #define COMP_ENDPOINT_NOT_ENABLED_ERROR 12
1111 #define COMP_SHORT_PACKET 13
1112 #define COMP_RING_UNDERRUN 14
1113 #define COMP_RING_OVERRUN 15
1114 #define COMP_VF_EVENT_RING_FULL_ERROR 16
1115 #define COMP_PARAMETER_ERROR 17
1116 #define COMP_BANDWIDTH_OVERRUN_ERROR 18
1117 #define COMP_CONTEXT_STATE_ERROR 19
1118 #define COMP_NO_PING_RESPONSE_ERROR 20
1119 #define COMP_EVENT_RING_FULL_ERROR 21
1120 #define COMP_INCOMPATIBLE_DEVICE_ERROR 22
1121 #define COMP_MISSED_SERVICE_ERROR 23
1122 #define COMP_COMMAND_RING_STOPPED 24
1123 #define COMP_COMMAND_ABORTED 25
1124 #define COMP_STOPPED 26
1125 #define COMP_STOPPED_LENGTH_INVALID 27
1126 #define COMP_STOPPED_SHORT_PACKET 28
1127 #define COMP_MAX_EXIT_LATENCY_TOO_LARGE_ERROR 29
1128 #define COMP_ISOCH_BUFFER_OVERRUN 31
1129 #define COMP_EVENT_LOST_ERROR 32
1130 #define COMP_UNDEFINED_ERROR 33
1131 #define COMP_INVALID_STREAM_ID_ERROR 34
1132 #define COMP_SECONDARY_BANDWIDTH_ERROR 35
1133 #define COMP_SPLIT_TRANSACTION_ERROR 36
1135 static inline const char *xhci_trb_comp_code_string(u8 status)
1142 case COMP_DATA_BUFFER_ERROR:
1143 return "Data Buffer Error";
1144 case COMP_BABBLE_DETECTED_ERROR:
1145 return "Babble Detected";
1146 case COMP_USB_TRANSACTION_ERROR:
1147 return "USB Transaction Error";
1148 case COMP_TRB_ERROR:
1150 case COMP_STALL_ERROR:
1151 return "Stall Error";
1152 case COMP_RESOURCE_ERROR:
1153 return "Resource Error";
1154 case COMP_BANDWIDTH_ERROR:
1155 return "Bandwidth Error";
1156 case COMP_NO_SLOTS_AVAILABLE_ERROR:
1157 return "No Slots Available Error";
1158 case COMP_INVALID_STREAM_TYPE_ERROR:
1159 return "Invalid Stream Type Error";
1160 case COMP_SLOT_NOT_ENABLED_ERROR:
1161 return "Slot Not Enabled Error";
1162 case COMP_ENDPOINT_NOT_ENABLED_ERROR:
1163 return "Endpoint Not Enabled Error";
1164 case COMP_SHORT_PACKET:
1165 return "Short Packet";
1166 case COMP_RING_UNDERRUN:
1167 return "Ring Underrun";
1168 case COMP_RING_OVERRUN:
1169 return "Ring Overrun";
1170 case COMP_VF_EVENT_RING_FULL_ERROR:
1171 return "VF Event Ring Full Error";
1172 case COMP_PARAMETER_ERROR:
1173 return "Parameter Error";
1174 case COMP_BANDWIDTH_OVERRUN_ERROR:
1175 return "Bandwidth Overrun Error";
1176 case COMP_CONTEXT_STATE_ERROR:
1177 return "Context State Error";
1178 case COMP_NO_PING_RESPONSE_ERROR:
1179 return "No Ping Response Error";
1180 case COMP_EVENT_RING_FULL_ERROR:
1181 return "Event Ring Full Error";
1182 case COMP_INCOMPATIBLE_DEVICE_ERROR:
1183 return "Incompatible Device Error";
1184 case COMP_MISSED_SERVICE_ERROR:
1185 return "Missed Service Error";
1186 case COMP_COMMAND_RING_STOPPED:
1187 return "Command Ring Stopped";
1188 case COMP_COMMAND_ABORTED:
1189 return "Command Aborted";
1192 case COMP_STOPPED_LENGTH_INVALID:
1193 return "Stopped - Length Invalid";
1194 case COMP_STOPPED_SHORT_PACKET:
1195 return "Stopped - Short Packet";
1196 case COMP_MAX_EXIT_LATENCY_TOO_LARGE_ERROR:
1197 return "Max Exit Latency Too Large Error";
1198 case COMP_ISOCH_BUFFER_OVERRUN:
1199 return "Isoch Buffer Overrun";
1200 case COMP_EVENT_LOST_ERROR:
1201 return "Event Lost Error";
1202 case COMP_UNDEFINED_ERROR:
1203 return "Undefined Error";
1204 case COMP_INVALID_STREAM_ID_ERROR:
1205 return "Invalid Stream ID Error";
1206 case COMP_SECONDARY_BANDWIDTH_ERROR:
1207 return "Secondary Bandwidth Error";
1208 case COMP_SPLIT_TRANSACTION_ERROR:
1209 return "Split Transaction Error";
1215 struct xhci_link_trb {
1216 /* 64-bit segment pointer*/
1222 /* control bitfields */
1223 #define LINK_TOGGLE (0x1<<1)
1225 /* Command completion event TRB */
1226 struct xhci_event_cmd {
1227 /* Pointer to command TRB, or the value passed by the event data trb */
1233 /* flags bitmasks */
1235 /* Address device - disable SetAddress */
1236 #define TRB_BSR (1<<9)
1238 /* Configure Endpoint - Deconfigure */
1239 #define TRB_DC (1<<9)
1241 /* Stop Ring - Transfer State Preserve */
1242 #define TRB_TSP (1<<9)
1244 enum xhci_ep_reset_type {
1250 #define TRB_TO_VF_INTR_TARGET(p) (((p) & (0x3ff << 22)) >> 22)
1251 #define TRB_TO_VF_ID(p) (((p) & (0xff << 16)) >> 16)
1253 /* Set Latency Tolerance Value */
1254 #define TRB_TO_BELT(p) (((p) & (0xfff << 16)) >> 16)
1256 /* Get Port Bandwidth */
1257 #define TRB_TO_DEV_SPEED(p) (((p) & (0xf << 16)) >> 16)
1260 #define TRB_TO_PACKET_TYPE(p) ((p) & 0x1f)
1261 #define TRB_TO_ROOTHUB_PORT(p) (((p) & (0xff << 24)) >> 24)
1263 enum xhci_setup_dev {
1265 SETUP_CONTEXT_ADDRESS,
1268 /* bits 16:23 are the virtual function ID */
1269 /* bits 24:31 are the slot ID */
1270 #define TRB_TO_SLOT_ID(p) (((p) & (0xff<<24)) >> 24)
1271 #define SLOT_ID_FOR_TRB(p) (((p) & 0xff) << 24)
1273 /* Stop Endpoint TRB - ep_index to endpoint ID for this TRB */
1274 #define TRB_TO_EP_INDEX(p) ((((p) & (0x1f << 16)) >> 16) - 1)
1275 #define EP_ID_FOR_TRB(p) ((((p) + 1) & 0x1f) << 16)
1277 #define SUSPEND_PORT_FOR_TRB(p) (((p) & 1) << 23)
1278 #define TRB_TO_SUSPEND_PORT(p) (((p) & (1 << 23)) >> 23)
1279 #define LAST_EP_INDEX 30
1281 /* Set TR Dequeue Pointer command TRB fields, 6.4.3.9 */
1282 #define TRB_TO_STREAM_ID(p) ((((p) & (0xffff << 16)) >> 16))
1283 #define STREAM_ID_FOR_TRB(p) ((((p)) & 0xffff) << 16)
1284 #define SCT_FOR_TRB(p) (((p) << 1) & 0x7)
1286 /* Link TRB specific fields */
1287 #define TRB_TC (1<<1)
1289 /* Port Status Change Event TRB fields */
1290 /* Port ID - bits 31:24 */
1291 #define GET_PORT_ID(p) (((p) & (0xff << 24)) >> 24)
1293 #define EVENT_DATA (1 << 2)
1295 /* Normal TRB fields */
1296 /* transfer_len bitmasks - bits 0:16 */
1297 #define TRB_LEN(p) ((p) & 0x1ffff)
1298 /* TD Size, packets remaining in this TD, bits 21:17 (5 bits, so max 31) */
1299 #define TRB_TD_SIZE(p) (min((p), (u32)31) << 17)
1300 #define GET_TD_SIZE(p) (((p) & 0x3e0000) >> 17)
1301 /* xhci 1.1 uses the TD_SIZE field for TBC if Extended TBC is enabled (ETE) */
1302 #define TRB_TD_SIZE_TBC(p) (min((p), (u32)31) << 17)
1303 /* Interrupter Target - which MSI-X vector to target the completion event at */
1304 #define TRB_INTR_TARGET(p) (((p) & 0x3ff) << 22)
1305 #define GET_INTR_TARGET(p) (((p) >> 22) & 0x3ff)
1306 /* Total burst count field, Rsvdz on xhci 1.1 with Extended TBC enabled (ETE) */
1307 #define TRB_TBC(p) (((p) & 0x3) << 7)
1308 #define TRB_TLBPC(p) (((p) & 0xf) << 16)
1310 /* Cycle bit - indicates TRB ownership by HC or HCD */
1311 #define TRB_CYCLE (1<<0)
1313 * Force next event data TRB to be evaluated before task switch.
1314 * Used to pass OS data back after a TD completes.
1316 #define TRB_ENT (1<<1)
1317 /* Interrupt on short packet */
1318 #define TRB_ISP (1<<2)
1319 /* Set PCIe no snoop attribute */
1320 #define TRB_NO_SNOOP (1<<3)
1321 /* Chain multiple TRBs into a TD */
1322 #define TRB_CHAIN (1<<4)
1323 /* Interrupt on completion */
1324 #define TRB_IOC (1<<5)
1325 /* The buffer pointer contains immediate data */
1326 #define TRB_IDT (1<<6)
1327 /* TDs smaller than this might use IDT */
1328 #define TRB_IDT_MAX_SIZE 8
1330 /* Block Event Interrupt */
1331 #define TRB_BEI (1<<9)
1333 /* Control transfer TRB specific fields */
1334 #define TRB_DIR_IN (1<<16)
1335 #define TRB_TX_TYPE(p) ((p) << 16)
1336 #define TRB_DATA_OUT 2
1337 #define TRB_DATA_IN 3
1339 /* Isochronous TRB specific fields */
1340 #define TRB_SIA (1<<31)
1341 #define TRB_FRAME_ID(p) (((p) & 0x7ff) << 20)
1343 /* TRB cache size for xHC with TRB cache */
1344 #define TRB_CACHE_SIZE_HS 8
1345 #define TRB_CACHE_SIZE_SS 16
1347 struct xhci_generic_trb {
1352 struct xhci_link_trb link;
1353 struct xhci_transfer_event trans_event;
1354 struct xhci_event_cmd event_cmd;
1355 struct xhci_generic_trb generic;
1359 #define TRB_TYPE_BITMASK (0xfc00)
1360 #define TRB_TYPE(p) ((p) << 10)
1361 #define TRB_FIELD_TO_TYPE(p) (((p) & TRB_TYPE_BITMASK) >> 10)
1363 /* bulk, interrupt, isoc scatter/gather, and control data stage */
1364 #define TRB_NORMAL 1
1365 /* setup stage for control transfers */
1367 /* data stage for control transfers */
1369 /* status stage for control transfers */
1370 #define TRB_STATUS 4
1371 /* isoc transfers */
1373 /* TRB for linking ring segments */
1375 #define TRB_EVENT_DATA 7
1376 /* Transfer Ring No-op (not for the command ring) */
1377 #define TRB_TR_NOOP 8
1379 /* Enable Slot Command */
1380 #define TRB_ENABLE_SLOT 9
1381 /* Disable Slot Command */
1382 #define TRB_DISABLE_SLOT 10
1383 /* Address Device Command */
1384 #define TRB_ADDR_DEV 11
1385 /* Configure Endpoint Command */
1386 #define TRB_CONFIG_EP 12
1387 /* Evaluate Context Command */
1388 #define TRB_EVAL_CONTEXT 13
1389 /* Reset Endpoint Command */
1390 #define TRB_RESET_EP 14
1391 /* Stop Transfer Ring Command */
1392 #define TRB_STOP_RING 15
1393 /* Set Transfer Ring Dequeue Pointer Command */
1394 #define TRB_SET_DEQ 16
1395 /* Reset Device Command */
1396 #define TRB_RESET_DEV 17
1397 /* Force Event Command (opt) */
1398 #define TRB_FORCE_EVENT 18
1399 /* Negotiate Bandwidth Command (opt) */
1400 #define TRB_NEG_BANDWIDTH 19
1401 /* Set Latency Tolerance Value Command (opt) */
1402 #define TRB_SET_LT 20
1403 /* Get port bandwidth Command */
1404 #define TRB_GET_BW 21
1405 /* Force Header Command - generate a transaction or link management packet */
1406 #define TRB_FORCE_HEADER 22
1407 /* No-op Command - not for transfer rings */
1408 #define TRB_CMD_NOOP 23
1409 /* TRB IDs 24-31 reserved */
1411 /* Transfer Event */
1412 #define TRB_TRANSFER 32
1413 /* Command Completion Event */
1414 #define TRB_COMPLETION 33
1415 /* Port Status Change Event */
1416 #define TRB_PORT_STATUS 34
1417 /* Bandwidth Request Event (opt) */
1418 #define TRB_BANDWIDTH_EVENT 35
1419 /* Doorbell Event (opt) */
1420 #define TRB_DOORBELL 36
1421 /* Host Controller Event */
1422 #define TRB_HC_EVENT 37
1423 /* Device Notification Event - device sent function wake notification */
1424 #define TRB_DEV_NOTE 38
1425 /* MFINDEX Wrap Event - microframe counter wrapped */
1426 #define TRB_MFINDEX_WRAP 39
1427 /* TRB IDs 40-47 reserved, 48-63 is vendor-defined */
1428 #define TRB_VENDOR_DEFINED_LOW 48
1429 /* Nec vendor-specific command completion event. */
1430 #define TRB_NEC_CMD_COMP 48
1431 /* Get NEC firmware revision. */
1432 #define TRB_NEC_GET_FW 49
1434 static inline const char *xhci_trb_type_string(u8 type)
1440 return "Setup Stage";
1442 return "Data Stage";
1444 return "Status Stage";
1449 case TRB_EVENT_DATA:
1450 return "Event Data";
1453 case TRB_ENABLE_SLOT:
1454 return "Enable Slot Command";
1455 case TRB_DISABLE_SLOT:
1456 return "Disable Slot Command";
1458 return "Address Device Command";
1460 return "Configure Endpoint Command";
1461 case TRB_EVAL_CONTEXT:
1462 return "Evaluate Context Command";
1464 return "Reset Endpoint Command";
1466 return "Stop Ring Command";
1468 return "Set TR Dequeue Pointer Command";
1470 return "Reset Device Command";
1471 case TRB_FORCE_EVENT:
1472 return "Force Event Command";
1473 case TRB_NEG_BANDWIDTH:
1474 return "Negotiate Bandwidth Command";
1476 return "Set Latency Tolerance Value Command";
1478 return "Get Port Bandwidth Command";
1479 case TRB_FORCE_HEADER:
1480 return "Force Header Command";
1482 return "No-Op Command";
1484 return "Transfer Event";
1485 case TRB_COMPLETION:
1486 return "Command Completion Event";
1487 case TRB_PORT_STATUS:
1488 return "Port Status Change Event";
1489 case TRB_BANDWIDTH_EVENT:
1490 return "Bandwidth Request Event";
1492 return "Doorbell Event";
1494 return "Host Controller Event";
1496 return "Device Notification Event";
1497 case TRB_MFINDEX_WRAP:
1498 return "MFINDEX Wrap Event";
1499 case TRB_NEC_CMD_COMP:
1500 return "NEC Command Completion Event";
1501 case TRB_NEC_GET_FW:
1502 return "NET Get Firmware Revision Command";
1508 #define TRB_TYPE_LINK(x) (((x) & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK))
1509 /* Above, but for __le32 types -- can avoid work by swapping constants: */
1510 #define TRB_TYPE_LINK_LE32(x) (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
1511 cpu_to_le32(TRB_TYPE(TRB_LINK)))
1512 #define TRB_TYPE_NOOP_LE32(x) (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
1513 cpu_to_le32(TRB_TYPE(TRB_TR_NOOP)))
1515 #define NEC_FW_MINOR(p) (((p) >> 0) & 0xff)
1516 #define NEC_FW_MAJOR(p) (((p) >> 8) & 0xff)
1519 * TRBS_PER_SEGMENT must be a multiple of 4,
1520 * since the command ring is 64-byte aligned.
1521 * It must also be greater than 16.
1523 #define TRBS_PER_SEGMENT 256
1524 /* Allow two commands + a link TRB, along with any reserved command TRBs */
1525 #define MAX_RSVD_CMD_TRBS (TRBS_PER_SEGMENT - 3)
1526 #define TRB_SEGMENT_SIZE (TRBS_PER_SEGMENT*16)
1527 #define TRB_SEGMENT_SHIFT (ilog2(TRB_SEGMENT_SIZE))
1528 /* TRB buffer pointers can't cross 64KB boundaries */
1529 #define TRB_MAX_BUFF_SHIFT 16
1530 #define TRB_MAX_BUFF_SIZE (1 << TRB_MAX_BUFF_SHIFT)
1531 /* How much data is left before the 64KB boundary? */
1532 #define TRB_BUFF_LEN_UP_TO_BOUNDARY(addr) (TRB_MAX_BUFF_SIZE - \
1533 (addr & (TRB_MAX_BUFF_SIZE - 1)))
1534 #define MAX_SOFT_RETRY 3
1536 * Limits of consecutive isoc trbs that can Block Event Interrupt (BEI) if
1537 * XHCI_AVOID_BEI quirk is in use.
1539 #define AVOID_BEI_INTERVAL_MIN 8
1540 #define AVOID_BEI_INTERVAL_MAX 32
1542 struct xhci_segment {
1543 union xhci_trb *trbs;
1544 /* private to HCD */
1545 struct xhci_segment *next;
1547 /* Max packet sized bounce buffer for td-fragmant alignment */
1548 dma_addr_t bounce_dma;
1550 unsigned int bounce_offs;
1551 unsigned int bounce_len;
1554 enum xhci_cancelled_td_status {
1562 struct list_head td_list;
1563 struct list_head cancelled_td_list;
1565 enum xhci_cancelled_td_status cancel_status;
1567 struct xhci_segment *start_seg;
1568 union xhci_trb *first_trb;
1569 union xhci_trb *last_trb;
1570 struct xhci_segment *last_trb_seg;
1571 struct xhci_segment *bounce_seg;
1572 /* actual_length of the URB has already been set */
1573 bool urb_length_set;
1574 unsigned int num_trbs;
1577 /* xHCI command default timeout value */
1578 #define XHCI_CMD_DEFAULT_TIMEOUT (5 * HZ)
1580 /* command descriptor */
1582 struct xhci_command *command;
1583 union xhci_trb *cmd_trb;
1586 enum xhci_ring_type {
1596 static inline const char *xhci_ring_type_string(enum xhci_ring_type type)
1619 struct xhci_segment *first_seg;
1620 struct xhci_segment *last_seg;
1621 union xhci_trb *enqueue;
1622 struct xhci_segment *enq_seg;
1623 union xhci_trb *dequeue;
1624 struct xhci_segment *deq_seg;
1625 struct list_head td_list;
1627 * Write the cycle state into the TRB cycle field to give ownership of
1628 * the TRB to the host controller (if we are the producer), or to check
1629 * if we own the TRB (if we are the consumer). See section 4.9.1.
1632 unsigned int err_count;
1633 unsigned int stream_id;
1634 unsigned int num_segs;
1635 unsigned int num_trbs_free;
1636 unsigned int num_trbs_free_temp;
1637 unsigned int bounce_buf_len;
1638 enum xhci_ring_type type;
1639 bool last_td_was_short;
1640 struct radix_tree_root *trb_address_map;
1643 struct xhci_erst_entry {
1644 /* 64-bit event ring segment address */
1652 struct xhci_erst_entry *entries;
1653 unsigned int num_entries;
1654 /* xhci->event_ring keeps track of segment dma addresses */
1655 dma_addr_t erst_dma_addr;
1656 /* Num entries the ERST can contain */
1657 unsigned int erst_size;
1660 struct xhci_scratchpad {
1669 struct xhci_td td[];
1673 * Each segment table entry is 4*32bits long. 1K seems like an ok size:
1674 * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
1675 * meaning 64 ring segments.
1676 * Initial allocated size of the ERST, in number of entries */
1677 #define ERST_NUM_SEGS 1
1678 /* Poll every 60 seconds */
1679 #define POLL_TIMEOUT 60
1680 /* Stop endpoint command timeout (secs) for URB cancellation watchdog timer */
1681 #define XHCI_STOP_EP_CMD_TIMEOUT 5
1682 /* XXX: Make these module parameters */
1699 struct list_head list;
1702 struct xhci_bus_state {
1703 unsigned long bus_suspended;
1704 unsigned long next_statechange;
1706 /* Port suspend arrays are indexed by the portnum of the fake roothub */
1707 /* ports suspend status arrays - max 31 ports for USB2, 15 for USB3 */
1709 u32 suspended_ports;
1710 u32 port_remote_wakeup;
1711 unsigned long resume_done[USB_MAXCHILDREN];
1712 /* which ports have started to resume */
1713 unsigned long resuming_ports;
1714 /* Which ports are waiting on RExit to U0 transition. */
1715 unsigned long rexit_ports;
1716 struct completion rexit_done[USB_MAXCHILDREN];
1717 struct completion u3exit_done[USB_MAXCHILDREN];
1722 * It can take up to 20 ms to transition from RExit to U0 on the
1723 * Intel Lynx Point LP xHCI host.
1725 #define XHCI_MAX_REXIT_TIMEOUT_MS 20
1726 struct xhci_port_cap {
1727 u32 *psi; /* array of protocol speed ID entries */
1735 __le32 __iomem *addr;
1738 struct xhci_hub *rhub;
1739 struct xhci_port_cap *port_cap;
1743 struct xhci_port **ports;
1744 unsigned int num_ports;
1745 struct usb_hcd *hcd;
1746 /* keep track of bus suspend info */
1747 struct xhci_bus_state bus_state;
1748 /* supported prococol extended capabiliy values */
1753 /* There is one xhci_hcd structure per controller */
1755 struct usb_hcd *main_hcd;
1756 struct usb_hcd *shared_hcd;
1757 /* glue to PCI and HCD framework */
1758 struct xhci_cap_regs __iomem *cap_regs;
1759 struct xhci_op_regs __iomem *op_regs;
1760 struct xhci_run_regs __iomem *run_regs;
1761 struct xhci_doorbell_array __iomem *dba;
1762 /* Our HCD's current interrupter register set */
1763 struct xhci_intr_reg __iomem *ir_set;
1765 /* Cached register copies of read-only HC data */
1774 /* packed release number */
1778 u8 max_interrupters;
1781 /* imod_interval in ns (I * 250ns) */
1783 u32 isoc_bei_interval;
1785 /* 4KB min, 128MB max */
1787 /* Valid values are 12 to 20, inclusive */
1791 /* optional clocks */
1793 struct clk *reg_clk;
1794 /* optional reset controller */
1795 struct reset_control *reset;
1796 /* data structures */
1797 struct xhci_device_context_array *dcbaa;
1798 struct xhci_ring *cmd_ring;
1799 unsigned int cmd_ring_state;
1800 #define CMD_RING_STATE_RUNNING (1 << 0)
1801 #define CMD_RING_STATE_ABORTED (1 << 1)
1802 #define CMD_RING_STATE_STOPPED (1 << 2)
1803 struct list_head cmd_list;
1804 unsigned int cmd_ring_reserved_trbs;
1805 struct delayed_work cmd_timer;
1806 struct completion cmd_ring_stop_completion;
1807 struct xhci_command *current_cmd;
1808 struct xhci_ring *event_ring;
1809 struct xhci_erst erst;
1811 struct xhci_scratchpad *scratchpad;
1812 /* Store LPM test failed devices' information */
1813 struct list_head lpm_failed_devs;
1815 /* slot enabling and address device helpers */
1816 /* these are not thread safe so use mutex */
1818 /* For USB 3.0 LPM enable/disable. */
1819 struct xhci_command *lpm_command;
1820 /* Internal mirror of the HW's dcbaa */
1821 struct xhci_virt_device *devs[MAX_HC_SLOTS];
1822 /* For keeping track of bandwidth domains per roothub. */
1823 struct xhci_root_port_bw_info *rh_bw;
1826 struct dma_pool *device_pool;
1827 struct dma_pool *segment_pool;
1828 struct dma_pool *small_streams_pool;
1829 struct dma_pool *medium_streams_pool;
1831 /* Host controller watchdog timer structures */
1832 unsigned int xhc_state;
1833 unsigned long run_graceperiod;
1836 /* Host controller is dying - not responding to commands. "I'm not dead yet!"
1838 * xHC interrupts have been disabled and a watchdog timer will (or has already)
1839 * halt the xHCI host, and complete all URBs with an -ESHUTDOWN code. Any code
1840 * that sees this status (other than the timer that set it) should stop touching
1841 * hardware immediately. Interrupt handlers should return immediately when
1842 * they see this status (any time they drop and re-acquire xhci->lock).
1843 * xhci_urb_dequeue() should call usb_hcd_check_unlink_urb() and return without
1844 * putting the TD on the canceled list, etc.
1846 * There are no reports of xHCI host controllers that display this issue.
1848 #define XHCI_STATE_DYING (1 << 0)
1849 #define XHCI_STATE_HALTED (1 << 1)
1850 #define XHCI_STATE_REMOVING (1 << 2)
1851 unsigned long long quirks;
1852 #define XHCI_LINK_TRB_QUIRK BIT_ULL(0)
1853 #define XHCI_RESET_EP_QUIRK BIT_ULL(1)
1854 #define XHCI_NEC_HOST BIT_ULL(2)
1855 #define XHCI_AMD_PLL_FIX BIT_ULL(3)
1856 #define XHCI_SPURIOUS_SUCCESS BIT_ULL(4)
1858 * Certain Intel host controllers have a limit to the number of endpoint
1859 * contexts they can handle. Ideally, they would signal that they can't handle
1860 * anymore endpoint contexts by returning a Resource Error for the Configure
1861 * Endpoint command, but they don't. Instead they expect software to keep track
1862 * of the number of active endpoints for them, across configure endpoint
1863 * commands, reset device commands, disable slot commands, and address device
1866 #define XHCI_EP_LIMIT_QUIRK BIT_ULL(5)
1867 #define XHCI_BROKEN_MSI BIT_ULL(6)
1868 #define XHCI_RESET_ON_RESUME BIT_ULL(7)
1869 #define XHCI_SW_BW_CHECKING BIT_ULL(8)
1870 #define XHCI_AMD_0x96_HOST BIT_ULL(9)
1871 #define XHCI_TRUST_TX_LENGTH BIT_ULL(10)
1872 #define XHCI_LPM_SUPPORT BIT_ULL(11)
1873 #define XHCI_INTEL_HOST BIT_ULL(12)
1874 #define XHCI_SPURIOUS_REBOOT BIT_ULL(13)
1875 #define XHCI_COMP_MODE_QUIRK BIT_ULL(14)
1876 #define XHCI_AVOID_BEI BIT_ULL(15)
1877 #define XHCI_PLAT BIT_ULL(16)
1878 #define XHCI_SLOW_SUSPEND BIT_ULL(17)
1879 #define XHCI_SPURIOUS_WAKEUP BIT_ULL(18)
1880 /* For controllers with a broken beyond repair streams implementation */
1881 #define XHCI_BROKEN_STREAMS BIT_ULL(19)
1882 #define XHCI_PME_STUCK_QUIRK BIT_ULL(20)
1883 #define XHCI_MTK_HOST BIT_ULL(21)
1884 #define XHCI_SSIC_PORT_UNUSED BIT_ULL(22)
1885 #define XHCI_NO_64BIT_SUPPORT BIT_ULL(23)
1886 #define XHCI_MISSING_CAS BIT_ULL(24)
1887 /* For controller with a broken Port Disable implementation */
1888 #define XHCI_BROKEN_PORT_PED BIT_ULL(25)
1889 #define XHCI_LIMIT_ENDPOINT_INTERVAL_7 BIT_ULL(26)
1890 #define XHCI_U2_DISABLE_WAKE BIT_ULL(27)
1891 #define XHCI_ASMEDIA_MODIFY_FLOWCONTROL BIT_ULL(28)
1892 #define XHCI_HW_LPM_DISABLE BIT_ULL(29)
1893 #define XHCI_SUSPEND_DELAY BIT_ULL(30)
1894 #define XHCI_INTEL_USB_ROLE_SW BIT_ULL(31)
1895 #define XHCI_ZERO_64B_REGS BIT_ULL(32)
1896 #define XHCI_DEFAULT_PM_RUNTIME_ALLOW BIT_ULL(33)
1897 #define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34)
1898 #define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35)
1899 #define XHCI_RENESAS_FW_QUIRK BIT_ULL(36)
1900 #define XHCI_SKIP_PHY_INIT BIT_ULL(37)
1901 #define XHCI_DISABLE_SPARSE BIT_ULL(38)
1902 #define XHCI_SG_TRB_CACHE_SIZE_QUIRK BIT_ULL(39)
1903 #define XHCI_NO_SOFT_RETRY BIT_ULL(40)
1904 #define XHCI_BROKEN_D3COLD BIT_ULL(41)
1905 #define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(42)
1906 #define XHCI_SUSPEND_RESUME_CLKS BIT_ULL(43)
1908 unsigned int num_active_eps;
1909 unsigned int limit_active_eps;
1910 struct xhci_port *hw_ports;
1911 struct xhci_hub usb2_rhub;
1912 struct xhci_hub usb3_rhub;
1913 /* support xHCI 1.0 spec USB2 hardware LPM */
1914 unsigned hw_lpm_support:1;
1915 /* Broken Suspend flag for SNPS Suspend resume issue */
1916 unsigned broken_suspend:1;
1917 /* cached usb2 extened protocol capabilites */
1919 unsigned int num_ext_caps;
1920 /* cached extended protocol port capabilities */
1921 struct xhci_port_cap *port_caps;
1922 unsigned int num_port_caps;
1923 /* Compliance Mode Recovery Data */
1924 struct timer_list comp_mode_recovery_timer;
1927 /* Compliance Mode Timer Triggered every 2 seconds */
1928 #define COMP_MODE_RCVRY_MSECS 2000
1930 struct dentry *debugfs_root;
1931 struct dentry *debugfs_slots;
1932 struct list_head regset_list;
1935 /* platform-specific data -- must come last */
1936 unsigned long priv[] __aligned(sizeof(s64));
1939 /* Platform specific overrides to generic XHCI hc_driver ops */
1940 struct xhci_driver_overrides {
1941 size_t extra_priv_size;
1942 int (*reset)(struct usb_hcd *hcd);
1943 int (*start)(struct usb_hcd *hcd);
1944 int (*add_endpoint)(struct usb_hcd *hcd, struct usb_device *udev,
1945 struct usb_host_endpoint *ep);
1946 int (*drop_endpoint)(struct usb_hcd *hcd, struct usb_device *udev,
1947 struct usb_host_endpoint *ep);
1948 int (*check_bandwidth)(struct usb_hcd *, struct usb_device *);
1949 void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
1952 #define XHCI_CFC_DELAY 10
1954 /* convert between an HCD pointer and the corresponding EHCI_HCD */
1955 static inline struct xhci_hcd *hcd_to_xhci(struct usb_hcd *hcd)
1957 struct usb_hcd *primary_hcd;
1959 if (usb_hcd_is_primary_hcd(hcd))
1962 primary_hcd = hcd->primary_hcd;
1964 return (struct xhci_hcd *) (primary_hcd->hcd_priv);
1967 static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci)
1969 return xhci->main_hcd;
1972 #define xhci_dbg(xhci, fmt, args...) \
1973 dev_dbg(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
1974 #define xhci_err(xhci, fmt, args...) \
1975 dev_err(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
1976 #define xhci_warn(xhci, fmt, args...) \
1977 dev_warn(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
1978 #define xhci_warn_ratelimited(xhci, fmt, args...) \
1979 dev_warn_ratelimited(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
1980 #define xhci_info(xhci, fmt, args...) \
1981 dev_info(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
1984 * Registers should always be accessed with double word or quad word accesses.
1986 * Some xHCI implementations may support 64-bit address pointers. Registers
1987 * with 64-bit address pointers should be written to with dword accesses by
1988 * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
1989 * xHCI implementations that do not support 64-bit address pointers will ignore
1990 * the high dword, and write order is irrelevant.
1992 static inline u64 xhci_read_64(const struct xhci_hcd *xhci,
1993 __le64 __iomem *regs)
1995 return lo_hi_readq(regs);
1997 static inline void xhci_write_64(struct xhci_hcd *xhci,
1998 const u64 val, __le64 __iomem *regs)
2000 lo_hi_writeq(val, regs);
2003 static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci)
2005 return xhci->quirks & XHCI_LINK_TRB_QUIRK;
2008 /* xHCI debugging */
2009 char *xhci_get_slot_state(struct xhci_hcd *xhci,
2010 struct xhci_container_ctx *ctx);
2011 void xhci_dbg_trace(struct xhci_hcd *xhci, void (*trace)(struct va_format *),
2012 const char *fmt, ...);
2014 /* xHCI memory management */
2015 void xhci_mem_cleanup(struct xhci_hcd *xhci);
2016 int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags);
2017 void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id);
2018 int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags);
2019 int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev);
2020 void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
2021 struct usb_device *udev);
2022 unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc);
2023 unsigned int xhci_get_endpoint_address(unsigned int ep_index);
2024 unsigned int xhci_last_valid_endpoint(u32 added_ctxs);
2025 void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep);
2026 void xhci_update_tt_active_eps(struct xhci_hcd *xhci,
2027 struct xhci_virt_device *virt_dev,
2028 int old_active_eps);
2029 void xhci_clear_endpoint_bw_info(struct xhci_bw_info *bw_info);
2030 void xhci_update_bw_info(struct xhci_hcd *xhci,
2031 struct xhci_container_ctx *in_ctx,
2032 struct xhci_input_control_ctx *ctrl_ctx,
2033 struct xhci_virt_device *virt_dev);
2034 void xhci_endpoint_copy(struct xhci_hcd *xhci,
2035 struct xhci_container_ctx *in_ctx,
2036 struct xhci_container_ctx *out_ctx,
2037 unsigned int ep_index);
2038 void xhci_slot_copy(struct xhci_hcd *xhci,
2039 struct xhci_container_ctx *in_ctx,
2040 struct xhci_container_ctx *out_ctx);
2041 int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev,
2042 struct usb_device *udev, struct usb_host_endpoint *ep,
2044 struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci,
2045 unsigned int num_segs, unsigned int cycle_state,
2046 enum xhci_ring_type type, unsigned int max_packet, gfp_t flags);
2047 void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring);
2048 int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring,
2049 unsigned int num_trbs, gfp_t flags);
2050 int xhci_alloc_erst(struct xhci_hcd *xhci,
2051 struct xhci_ring *evt_ring,
2052 struct xhci_erst *erst,
2054 void xhci_initialize_ring_info(struct xhci_ring *ring,
2055 unsigned int cycle_state);
2056 void xhci_free_erst(struct xhci_hcd *xhci, struct xhci_erst *erst);
2057 void xhci_free_endpoint_ring(struct xhci_hcd *xhci,
2058 struct xhci_virt_device *virt_dev,
2059 unsigned int ep_index);
2060 struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
2061 unsigned int num_stream_ctxs,
2062 unsigned int num_streams,
2063 unsigned int max_packet, gfp_t flags);
2064 void xhci_free_stream_info(struct xhci_hcd *xhci,
2065 struct xhci_stream_info *stream_info);
2066 void xhci_setup_streams_ep_input_ctx(struct xhci_hcd *xhci,
2067 struct xhci_ep_ctx *ep_ctx,
2068 struct xhci_stream_info *stream_info);
2069 void xhci_setup_no_streams_ep_input_ctx(struct xhci_ep_ctx *ep_ctx,
2070 struct xhci_virt_ep *ep);
2071 void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci,
2072 struct xhci_virt_device *virt_dev, bool drop_control_ep);
2073 struct xhci_ring *xhci_dma_to_transfer_ring(
2074 struct xhci_virt_ep *ep,
2076 struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci,
2077 bool allocate_completion, gfp_t mem_flags);
2078 struct xhci_command *xhci_alloc_command_with_ctx(struct xhci_hcd *xhci,
2079 bool allocate_completion, gfp_t mem_flags);
2080 void xhci_urb_free_priv(struct urb_priv *urb_priv);
2081 void xhci_free_command(struct xhci_hcd *xhci,
2082 struct xhci_command *command);
2083 struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
2084 int type, gfp_t flags);
2085 void xhci_free_container_ctx(struct xhci_hcd *xhci,
2086 struct xhci_container_ctx *ctx);
2088 /* xHCI host controller glue */
2089 typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *);
2090 int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, u64 timeout_us);
2091 void xhci_quiesce(struct xhci_hcd *xhci);
2092 int xhci_halt(struct xhci_hcd *xhci);
2093 int xhci_start(struct xhci_hcd *xhci);
2094 int xhci_reset(struct xhci_hcd *xhci, u64 timeout_us);
2095 int xhci_run(struct usb_hcd *hcd);
2096 int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks);
2097 void xhci_shutdown(struct usb_hcd *hcd);
2098 void xhci_init_driver(struct hc_driver *drv,
2099 const struct xhci_driver_overrides *over);
2100 int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
2101 struct usb_host_endpoint *ep);
2102 int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
2103 struct usb_host_endpoint *ep);
2104 int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
2105 void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
2106 int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id);
2107 int xhci_ext_cap_init(struct xhci_hcd *xhci);
2109 int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup);
2110 int xhci_resume(struct xhci_hcd *xhci, bool hibernated);
2112 irqreturn_t xhci_irq(struct usb_hcd *hcd);
2113 irqreturn_t xhci_msi_irq(int irq, void *hcd);
2114 int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev);
2115 int xhci_alloc_tt_info(struct xhci_hcd *xhci,
2116 struct xhci_virt_device *virt_dev,
2117 struct usb_device *hdev,
2118 struct usb_tt *tt, gfp_t mem_flags);
2120 /* xHCI ring, segment, TRB, and TD functions */
2121 dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, union xhci_trb *trb);
2122 struct xhci_segment *trb_in_td(struct xhci_hcd *xhci,
2123 struct xhci_segment *start_seg, union xhci_trb *start_trb,
2124 union xhci_trb *end_trb, dma_addr_t suspect_dma, bool debug);
2125 int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code);
2126 void xhci_ring_cmd_db(struct xhci_hcd *xhci);
2127 int xhci_queue_slot_control(struct xhci_hcd *xhci, struct xhci_command *cmd,
2128 u32 trb_type, u32 slot_id);
2129 int xhci_queue_address_device(struct xhci_hcd *xhci, struct xhci_command *cmd,
2130 dma_addr_t in_ctx_ptr, u32 slot_id, enum xhci_setup_dev);
2131 int xhci_queue_vendor_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
2132 u32 field1, u32 field2, u32 field3, u32 field4);
2133 int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, struct xhci_command *cmd,
2134 int slot_id, unsigned int ep_index, int suspend);
2135 int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
2136 int slot_id, unsigned int ep_index);
2137 int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
2138 int slot_id, unsigned int ep_index);
2139 int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
2140 int slot_id, unsigned int ep_index);
2141 int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
2142 struct urb *urb, int slot_id, unsigned int ep_index);
2143 int xhci_queue_configure_endpoint(struct xhci_hcd *xhci,
2144 struct xhci_command *cmd, dma_addr_t in_ctx_ptr, u32 slot_id,
2145 bool command_must_succeed);
2146 int xhci_queue_evaluate_context(struct xhci_hcd *xhci, struct xhci_command *cmd,
2147 dma_addr_t in_ctx_ptr, u32 slot_id, bool command_must_succeed);
2148 int xhci_queue_reset_ep(struct xhci_hcd *xhci, struct xhci_command *cmd,
2149 int slot_id, unsigned int ep_index,
2150 enum xhci_ep_reset_type reset_type);
2151 int xhci_queue_reset_device(struct xhci_hcd *xhci, struct xhci_command *cmd,
2153 void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int slot_id,
2154 unsigned int ep_index, unsigned int stream_id,
2155 struct xhci_td *td);
2156 void xhci_stop_endpoint_command_watchdog(struct timer_list *t);
2157 void xhci_handle_command_timeout(struct work_struct *work);
2159 void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id,
2160 unsigned int ep_index, unsigned int stream_id);
2161 void xhci_ring_doorbell_for_active_rings(struct xhci_hcd *xhci,
2162 unsigned int slot_id,
2163 unsigned int ep_index);
2164 void xhci_cleanup_command_queue(struct xhci_hcd *xhci);
2165 void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring);
2166 unsigned int count_trbs(u64 addr, u64 len);
2168 /* xHCI roothub code */
2169 void xhci_set_link_state(struct xhci_hcd *xhci, struct xhci_port *port,
2171 void xhci_test_and_clear_bit(struct xhci_hcd *xhci, struct xhci_port *port,
2173 int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
2174 char *buf, u16 wLength);
2175 int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
2176 int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1);
2177 struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd);
2179 void xhci_hc_died(struct xhci_hcd *xhci);
2182 int xhci_bus_suspend(struct usb_hcd *hcd);
2183 int xhci_bus_resume(struct usb_hcd *hcd);
2184 unsigned long xhci_get_resuming_ports(struct usb_hcd *hcd);
2186 #define xhci_bus_suspend NULL
2187 #define xhci_bus_resume NULL
2188 #define xhci_get_resuming_ports NULL
2189 #endif /* CONFIG_PM */
2191 u32 xhci_port_state_to_neutral(u32 state);
2192 int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
2194 void xhci_ring_device(struct xhci_hcd *xhci, int slot_id);
2197 struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_container_ctx *ctx);
2198 struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
2199 struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index);
2201 struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
2202 unsigned int slot_id, unsigned int ep_index,
2203 unsigned int stream_id);
2205 static inline struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci,
2208 return xhci_triad_to_transfer_ring(xhci, urb->dev->slot_id,
2209 xhci_get_endpoint_index(&urb->ep->desc),
2214 * TODO: As per spec Isochronous IDT transmissions are supported. We bypass
2215 * them anyways as we where unable to find a device that matches the
2218 static inline bool xhci_urb_suitable_for_idt(struct urb *urb)
2220 if (!usb_endpoint_xfer_isoc(&urb->ep->desc) && usb_urb_dir_out(urb) &&
2221 usb_endpoint_maxp(&urb->ep->desc) >= TRB_IDT_MAX_SIZE &&
2222 urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE &&
2223 !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) &&
2230 static inline char *xhci_slot_state_string(u32 state)
2233 case SLOT_STATE_ENABLED:
2234 return "enabled/disabled";
2235 case SLOT_STATE_DEFAULT:
2237 case SLOT_STATE_ADDRESSED:
2239 case SLOT_STATE_CONFIGURED:
2240 return "configured";
2246 static inline const char *xhci_decode_trb(char *str, size_t size,
2247 u32 field0, u32 field1, u32 field2, u32 field3)
2249 int type = TRB_FIELD_TO_TYPE(field3);
2254 "LINK %08x%08x intr %d type '%s' flags %c:%c:%c:%c",
2255 field1, field0, GET_INTR_TARGET(field2),
2256 xhci_trb_type_string(type),
2257 field3 & TRB_IOC ? 'I' : 'i',
2258 field3 & TRB_CHAIN ? 'C' : 'c',
2259 field3 & TRB_TC ? 'T' : 't',
2260 field3 & TRB_CYCLE ? 'C' : 'c');
2263 case TRB_COMPLETION:
2264 case TRB_PORT_STATUS:
2265 case TRB_BANDWIDTH_EVENT:
2269 case TRB_MFINDEX_WRAP:
2271 "TRB %08x%08x status '%s' len %d slot %d ep %d type '%s' flags %c:%c",
2273 xhci_trb_comp_code_string(GET_COMP_CODE(field2)),
2274 EVENT_TRB_LEN(field2), TRB_TO_SLOT_ID(field3),
2275 /* Macro decrements 1, maybe it shouldn't?!? */
2276 TRB_TO_EP_INDEX(field3) + 1,
2277 xhci_trb_type_string(type),
2278 field3 & EVENT_DATA ? 'E' : 'e',
2279 field3 & TRB_CYCLE ? 'C' : 'c');
2284 "bRequestType %02x bRequest %02x wValue %02x%02x wIndex %02x%02x wLength %d length %d TD size %d intr %d type '%s' flags %c:%c:%c",
2286 (field0 & 0xff00) >> 8,
2287 (field0 & 0xff000000) >> 24,
2288 (field0 & 0xff0000) >> 16,
2289 (field1 & 0xff00) >> 8,
2291 (field1 & 0xff000000) >> 16 |
2292 (field1 & 0xff0000) >> 16,
2293 TRB_LEN(field2), GET_TD_SIZE(field2),
2294 GET_INTR_TARGET(field2),
2295 xhci_trb_type_string(type),
2296 field3 & TRB_IDT ? 'I' : 'i',
2297 field3 & TRB_IOC ? 'I' : 'i',
2298 field3 & TRB_CYCLE ? 'C' : 'c');
2302 "Buffer %08x%08x length %d TD size %d intr %d type '%s' flags %c:%c:%c:%c:%c:%c:%c",
2303 field1, field0, TRB_LEN(field2), GET_TD_SIZE(field2),
2304 GET_INTR_TARGET(field2),
2305 xhci_trb_type_string(type),
2306 field3 & TRB_IDT ? 'I' : 'i',
2307 field3 & TRB_IOC ? 'I' : 'i',
2308 field3 & TRB_CHAIN ? 'C' : 'c',
2309 field3 & TRB_NO_SNOOP ? 'S' : 's',
2310 field3 & TRB_ISP ? 'I' : 'i',
2311 field3 & TRB_ENT ? 'E' : 'e',
2312 field3 & TRB_CYCLE ? 'C' : 'c');
2316 "Buffer %08x%08x length %d TD size %d intr %d type '%s' flags %c:%c:%c:%c",
2317 field1, field0, TRB_LEN(field2), GET_TD_SIZE(field2),
2318 GET_INTR_TARGET(field2),
2319 xhci_trb_type_string(type),
2320 field3 & TRB_IOC ? 'I' : 'i',
2321 field3 & TRB_CHAIN ? 'C' : 'c',
2322 field3 & TRB_ENT ? 'E' : 'e',
2323 field3 & TRB_CYCLE ? 'C' : 'c');
2327 case TRB_EVENT_DATA:
2330 "Buffer %08x%08x length %d TD size %d intr %d type '%s' flags %c:%c:%c:%c:%c:%c:%c:%c",
2331 field1, field0, TRB_LEN(field2), GET_TD_SIZE(field2),
2332 GET_INTR_TARGET(field2),
2333 xhci_trb_type_string(type),
2334 field3 & TRB_BEI ? 'B' : 'b',
2335 field3 & TRB_IDT ? 'I' : 'i',
2336 field3 & TRB_IOC ? 'I' : 'i',
2337 field3 & TRB_CHAIN ? 'C' : 'c',
2338 field3 & TRB_NO_SNOOP ? 'S' : 's',
2339 field3 & TRB_ISP ? 'I' : 'i',
2340 field3 & TRB_ENT ? 'E' : 'e',
2341 field3 & TRB_CYCLE ? 'C' : 'c');
2345 case TRB_ENABLE_SLOT:
2348 xhci_trb_type_string(type),
2349 field3 & TRB_CYCLE ? 'C' : 'c');
2351 case TRB_DISABLE_SLOT:
2352 case TRB_NEG_BANDWIDTH:
2354 "%s: slot %d flags %c",
2355 xhci_trb_type_string(type),
2356 TRB_TO_SLOT_ID(field3),
2357 field3 & TRB_CYCLE ? 'C' : 'c');
2361 "%s: ctx %08x%08x slot %d flags %c:%c",
2362 xhci_trb_type_string(type),
2364 TRB_TO_SLOT_ID(field3),
2365 field3 & TRB_BSR ? 'B' : 'b',
2366 field3 & TRB_CYCLE ? 'C' : 'c');
2370 "%s: ctx %08x%08x slot %d flags %c:%c",
2371 xhci_trb_type_string(type),
2373 TRB_TO_SLOT_ID(field3),
2374 field3 & TRB_DC ? 'D' : 'd',
2375 field3 & TRB_CYCLE ? 'C' : 'c');
2377 case TRB_EVAL_CONTEXT:
2379 "%s: ctx %08x%08x slot %d flags %c",
2380 xhci_trb_type_string(type),
2382 TRB_TO_SLOT_ID(field3),
2383 field3 & TRB_CYCLE ? 'C' : 'c');
2387 "%s: ctx %08x%08x slot %d ep %d flags %c:%c",
2388 xhci_trb_type_string(type),
2390 TRB_TO_SLOT_ID(field3),
2391 /* Macro decrements 1, maybe it shouldn't?!? */
2392 TRB_TO_EP_INDEX(field3) + 1,
2393 field3 & TRB_TSP ? 'T' : 't',
2394 field3 & TRB_CYCLE ? 'C' : 'c');
2398 "%s: slot %d sp %d ep %d flags %c",
2399 xhci_trb_type_string(type),
2400 TRB_TO_SLOT_ID(field3),
2401 TRB_TO_SUSPEND_PORT(field3),
2402 /* Macro decrements 1, maybe it shouldn't?!? */
2403 TRB_TO_EP_INDEX(field3) + 1,
2404 field3 & TRB_CYCLE ? 'C' : 'c');
2408 "%s: deq %08x%08x stream %d slot %d ep %d flags %c",
2409 xhci_trb_type_string(type),
2411 TRB_TO_STREAM_ID(field2),
2412 TRB_TO_SLOT_ID(field3),
2413 /* Macro decrements 1, maybe it shouldn't?!? */
2414 TRB_TO_EP_INDEX(field3) + 1,
2415 field3 & TRB_CYCLE ? 'C' : 'c');
2419 "%s: slot %d flags %c",
2420 xhci_trb_type_string(type),
2421 TRB_TO_SLOT_ID(field3),
2422 field3 & TRB_CYCLE ? 'C' : 'c');
2424 case TRB_FORCE_EVENT:
2426 "%s: event %08x%08x vf intr %d vf id %d flags %c",
2427 xhci_trb_type_string(type),
2429 TRB_TO_VF_INTR_TARGET(field2),
2430 TRB_TO_VF_ID(field3),
2431 field3 & TRB_CYCLE ? 'C' : 'c');
2435 "%s: belt %d flags %c",
2436 xhci_trb_type_string(type),
2437 TRB_TO_BELT(field3),
2438 field3 & TRB_CYCLE ? 'C' : 'c');
2442 "%s: ctx %08x%08x slot %d speed %d flags %c",
2443 xhci_trb_type_string(type),
2445 TRB_TO_SLOT_ID(field3),
2446 TRB_TO_DEV_SPEED(field3),
2447 field3 & TRB_CYCLE ? 'C' : 'c');
2449 case TRB_FORCE_HEADER:
2451 "%s: info %08x%08x%08x pkt type %d roothub port %d flags %c",
2452 xhci_trb_type_string(type),
2453 field2, field1, field0 & 0xffffffe0,
2454 TRB_TO_PACKET_TYPE(field0),
2455 TRB_TO_ROOTHUB_PORT(field3),
2456 field3 & TRB_CYCLE ? 'C' : 'c');
2460 "type '%s' -> raw %08x %08x %08x %08x",
2461 xhci_trb_type_string(type),
2462 field0, field1, field2, field3);
2468 static inline const char *xhci_decode_ctrl_ctx(char *str,
2469 unsigned long drop, unsigned long add)
2477 ret = sprintf(str, "Drop:");
2478 for_each_set_bit(bit, &drop, 32)
2479 ret += sprintf(str + ret, " %d%s",
2481 bit % 2 ? "in":"out");
2482 ret += sprintf(str + ret, ", ");
2486 ret += sprintf(str + ret, "Add:%s%s",
2487 (add & SLOT_FLAG) ? " slot":"",
2488 (add & EP0_FLAG) ? " ep0":"");
2489 add &= ~(SLOT_FLAG | EP0_FLAG);
2490 for_each_set_bit(bit, &add, 32)
2491 ret += sprintf(str + ret, " %d%s",
2493 bit % 2 ? "in":"out");
2498 static inline const char *xhci_decode_slot_context(char *str,
2499 u32 info, u32 info2, u32 tt_info, u32 state)
2506 speed = info & DEV_SPEED;
2507 hub = info & DEV_HUB;
2508 mtt = info & DEV_MTT;
2510 ret = sprintf(str, "RS %05x %s%s%s Ctx Entries %d MEL %d us Port# %d/%d",
2511 info & ROUTE_STRING_MASK,
2526 case SLOT_SPEED_SSP:
2527 s = "super-speed plus";
2530 s = "UNKNOWN speed";
2532 mtt ? " multi-TT" : "",
2534 (info & LAST_CTX_MASK) >> 27,
2536 DEVINFO_TO_ROOT_HUB_PORT(info2),
2537 DEVINFO_TO_MAX_PORTS(info2));
2539 ret += sprintf(str + ret, " [TT Slot %d Port# %d TTT %d Intr %d] Addr %d State %s",
2540 tt_info & TT_SLOT, (tt_info & TT_PORT) >> 8,
2541 GET_TT_THINK_TIME(tt_info), GET_INTR_TARGET(tt_info),
2542 state & DEV_ADDR_MASK,
2543 xhci_slot_state_string(GET_SLOT_STATE(state)));
2549 static inline const char *xhci_portsc_link_state_string(u32 portsc)
2551 switch (portsc & PORT_PLS_MASK) {
2570 case XDEV_HOT_RESET:
2572 case XDEV_COMP_MODE:
2573 return "Compliance mode";
2574 case XDEV_TEST_MODE:
2584 static inline const char *xhci_decode_portsc(char *str, u32 portsc)
2588 ret = sprintf(str, "%s %s %s Link:%s PortSpeed:%d ",
2589 portsc & PORT_POWER ? "Powered" : "Powered-off",
2590 portsc & PORT_CONNECT ? "Connected" : "Not-connected",
2591 portsc & PORT_PE ? "Enabled" : "Disabled",
2592 xhci_portsc_link_state_string(portsc),
2593 DEV_PORT_SPEED(portsc));
2595 if (portsc & PORT_OC)
2596 ret += sprintf(str + ret, "OverCurrent ");
2597 if (portsc & PORT_RESET)
2598 ret += sprintf(str + ret, "In-Reset ");
2600 ret += sprintf(str + ret, "Change: ");
2601 if (portsc & PORT_CSC)
2602 ret += sprintf(str + ret, "CSC ");
2603 if (portsc & PORT_PEC)
2604 ret += sprintf(str + ret, "PEC ");
2605 if (portsc & PORT_WRC)
2606 ret += sprintf(str + ret, "WRC ");
2607 if (portsc & PORT_OCC)
2608 ret += sprintf(str + ret, "OCC ");
2609 if (portsc & PORT_RC)
2610 ret += sprintf(str + ret, "PRC ");
2611 if (portsc & PORT_PLC)
2612 ret += sprintf(str + ret, "PLC ");
2613 if (portsc & PORT_CEC)
2614 ret += sprintf(str + ret, "CEC ");
2615 if (portsc & PORT_CAS)
2616 ret += sprintf(str + ret, "CAS ");
2618 ret += sprintf(str + ret, "Wake: ");
2619 if (portsc & PORT_WKCONN_E)
2620 ret += sprintf(str + ret, "WCE ");
2621 if (portsc & PORT_WKDISC_E)
2622 ret += sprintf(str + ret, "WDE ");
2623 if (portsc & PORT_WKOC_E)
2624 ret += sprintf(str + ret, "WOE ");
2629 static inline const char *xhci_decode_usbsts(char *str, u32 usbsts)
2633 ret = sprintf(str, " 0x%08x", usbsts);
2635 if (usbsts == ~(u32)0)
2638 if (usbsts & STS_HALT)
2639 ret += sprintf(str + ret, " HCHalted");
2640 if (usbsts & STS_FATAL)
2641 ret += sprintf(str + ret, " HSE");
2642 if (usbsts & STS_EINT)
2643 ret += sprintf(str + ret, " EINT");
2644 if (usbsts & STS_PORT)
2645 ret += sprintf(str + ret, " PCD");
2646 if (usbsts & STS_SAVE)
2647 ret += sprintf(str + ret, " SSS");
2648 if (usbsts & STS_RESTORE)
2649 ret += sprintf(str + ret, " RSS");
2650 if (usbsts & STS_SRE)
2651 ret += sprintf(str + ret, " SRE");
2652 if (usbsts & STS_CNR)
2653 ret += sprintf(str + ret, " CNR");
2654 if (usbsts & STS_HCE)
2655 ret += sprintf(str + ret, " HCE");
2660 static inline const char *xhci_decode_doorbell(char *str, u32 slot, u32 doorbell)
2666 ep = (doorbell & 0xff);
2667 stream = doorbell >> 16;
2670 sprintf(str, "Command Ring %d", doorbell);
2673 ret = sprintf(str, "Slot %d ", slot);
2674 if (ep > 0 && ep < 32)
2675 ret = sprintf(str + ret, "ep%d%s",
2677 ep % 2 ? "in" : "out");
2678 else if (ep == 0 || ep < 248)
2679 ret = sprintf(str + ret, "Reserved %d", ep);
2681 ret = sprintf(str + ret, "Vendor Defined %d", ep);
2683 ret = sprintf(str + ret, " Stream %d", stream);
2688 static inline const char *xhci_ep_state_string(u8 state)
2691 case EP_STATE_DISABLED:
2693 case EP_STATE_RUNNING:
2695 case EP_STATE_HALTED:
2697 case EP_STATE_STOPPED:
2699 case EP_STATE_ERROR:
2706 static inline const char *xhci_ep_type_string(u8 type)
2728 static inline const char *xhci_decode_ep_context(char *str, u32 info,
2729 u32 info2, u64 deq, u32 tx_info)
2748 esit = CTX_TO_MAX_ESIT_PAYLOAD_HI(info) << 16 |
2749 CTX_TO_MAX_ESIT_PAYLOAD(tx_info);
2751 ep_state = info & EP_STATE_MASK;
2752 max_pstr = CTX_TO_EP_MAXPSTREAMS(info);
2753 interval = CTX_TO_EP_INTERVAL(info);
2754 mult = CTX_TO_EP_MULT(info) + 1;
2755 lsa = !!(info & EP_HAS_LSA);
2757 cerr = (info2 & (3 << 1)) >> 1;
2758 ep_type = CTX_TO_EP_TYPE(info2);
2759 hid = !!(info2 & (1 << 7));
2760 burst = CTX_TO_MAX_BURST(info2);
2761 maxp = MAX_PACKET_DECODED(info2);
2763 avg = EP_AVG_TRB_LENGTH(tx_info);
2765 ret = sprintf(str, "State %s mult %d max P. Streams %d %s",
2766 xhci_ep_state_string(ep_state), mult,
2767 max_pstr, lsa ? "LSA " : "");
2769 ret += sprintf(str + ret, "interval %d us max ESIT payload %d CErr %d ",
2770 (1 << interval) * 125, esit, cerr);
2772 ret += sprintf(str + ret, "Type %s %sburst %d maxp %d deq %016llx ",
2773 xhci_ep_type_string(ep_type), hid ? "HID" : "",
2776 ret += sprintf(str + ret, "avg trb len %d", avg);
2781 #endif /* __LINUX_XHCI_HCD_H */