drivers/usb/host/ohci-omap.c

   1 // SPDX-License-Identifier: GPL-1.0+
   2 /*
   3  * OHCI HCD (Host Controller Driver) for USB.
   4  *
   5  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
   6  * (C) Copyright 2000-2005 David Brownell
   7  * (C) Copyright 2002 Hewlett-Packard Company
   8  *
   9  * OMAP Bus Glue
  10  *
  11  * Modified for OMAP by Tony Lindgren <tony@atomide.com>
  12  * Based on the 2.4 OMAP OHCI driver originally done by MontaVista Software Inc.
  13  * and on ohci-sa1111.c by Christopher Hoover <ch@hpl.hp.com>
  14  *
  15  * This file is licenced under the GPL.
  16  */
  17
  18 #include <linux/clk.h>
  19 #include <linux/dma-mapping.h>
  20 #include <linux/err.h>
  21 #include <linux/gpio/consumer.h>
  22 #include <linux/io.h>
  23 #include <linux/jiffies.h>
  24 #include <linux/kernel.h>
  25 #include <linux/module.h>
  26 #include <linux/usb/otg.h>
  27 #include <linux/platform_device.h>
  28 #include <linux/signal.h>
  29 #include <linux/usb.h>
  30 #include <linux/usb/hcd.h>
  31
  32 #include "ohci.h"
  33
  34 #include <asm/io.h>
  35 #include <asm/mach-types.h>
  36
  37 #include <mach/mux.h>
  38
  39 #include <mach/hardware.h>
  40 #include <mach/usb.h>
  41
  42
  43 #define DRIVER_DESC "OHCI OMAP driver"
  44
  45 struct ohci_omap_priv {
  46         struct clk *usb_host_ck;
  47         struct clk *usb_dc_ck;
  48         struct gpio_desc *power;
  49         struct gpio_desc *overcurrent;
  50 };
  51
  52 static const char hcd_name[] = "ohci-omap";
  53 static struct hc_driver __read_mostly ohci_omap_hc_driver;
  54
  55 #define hcd_to_ohci_omap_priv(h) \
  56         ((struct ohci_omap_priv *)hcd_to_ohci(h)->priv)
  57
  58 static void omap_ohci_clock_power(struct ohci_omap_priv *priv, int on)
  59 {
  60         if (on) {
  61                 clk_enable(priv->usb_dc_ck);
  62                 clk_enable(priv->usb_host_ck);
  63                 /* guesstimate for T5 == 1x 32K clock + APLL lock time */
  64                 udelay(100);
  65         } else {
  66                 clk_disable(priv->usb_host_ck);
  67                 clk_disable(priv->usb_dc_ck);
  68         }
  69 }
  70
  71 /*
  72  * Board specific gang-switched transceiver power on/off.
  73  * NOTE:  OSK supplies power from DC, not battery.
  74  */
  75 static int omap_ohci_transceiver_power(struct ohci_omap_priv *priv, int on)
  76 {
  77         if (on) {
  78                 if (machine_is_omap_innovator() && cpu_is_omap1510())
  79                         __raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
  80                                 | ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
  81                                INNOVATOR_FPGA_CAM_USB_CONTROL);
  82                 else if (priv->power)
  83                         gpiod_set_value_cansleep(priv->power, 0);
  84         } else {
  85                 if (machine_is_omap_innovator() && cpu_is_omap1510())
  86                         __raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
  87                                 & ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
  88                                INNOVATOR_FPGA_CAM_USB_CONTROL);
  89                 else if (priv->power)
  90                         gpiod_set_value_cansleep(priv->power, 1);
  91         }
  92
  93         return 0;
  94 }
  95
  96 #ifdef  CONFIG_USB_OTG
  97
  98 static void start_hnp(struct ohci_hcd *ohci)
  99 {
 100         struct usb_hcd *hcd = ohci_to_hcd(ohci);
 101         const unsigned  port = hcd->self.otg_port - 1;
 102         unsigned long   flags;
 103         u32 l;
 104
 105         otg_start_hnp(hcd->usb_phy->otg);
 106
 107         local_irq_save(flags);
 108         hcd->usb_phy->otg->state = OTG_STATE_A_SUSPEND;
 109         writel (RH_PS_PSS, &ohci->regs->roothub.portstatus [port]);
 110         l = omap_readl(OTG_CTRL);
 111         l &= ~OTG_A_BUSREQ;
 112         omap_writel(l, OTG_CTRL);
 113         local_irq_restore(flags);
 114 }
 115
 116 #endif
 117
 118 /*-------------------------------------------------------------------------*/
 119
 120 static int ohci_omap_reset(struct usb_hcd *hcd)
 121 {
 122         struct ohci_hcd         *ohci = hcd_to_ohci(hcd);
 123         struct omap_usb_config  *config = dev_get_platdata(hcd->self.controller);
 124         struct ohci_omap_priv   *priv = hcd_to_ohci_omap_priv(hcd);
 125         int                     need_transceiver = (config->otg != 0);
 126         int                     ret;
 127
 128         dev_dbg(hcd->self.controller, "starting USB Controller\n");
 129
 130         if (config->otg) {
 131                 hcd->self.otg_port = config->otg;
 132                 /* default/minimum OTG power budget:  8 mA */
 133                 hcd->power_budget = 8;
 134         }
 135
 136         /* boards can use OTG transceivers in non-OTG modes */
 137         need_transceiver = need_transceiver
 138                         || machine_is_omap_h2() || machine_is_omap_h3();
 139
 140         /* XXX OMAP16xx only */
 141         if (config->ocpi_enable)
 142                 config->ocpi_enable();
 143
 144 #ifdef  CONFIG_USB_OTG
 145         if (need_transceiver) {
 146                 hcd->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2);
 147                 if (!IS_ERR_OR_NULL(hcd->usb_phy)) {
 148                         int     status = otg_set_host(hcd->usb_phy->otg,
 149                                                 &ohci_to_hcd(ohci)->self);
 150                         dev_dbg(hcd->self.controller, "init %s phy, status %d\n",
 151                                         hcd->usb_phy->label, status);
 152                         if (status) {
 153                                 usb_put_phy(hcd->usb_phy);
 154                                 return status;
 155                         }
 156                 } else {
 157                         return -EPROBE_DEFER;
 158                 }
 159                 hcd->skip_phy_initialization = 1;
 160                 ohci->start_hnp = start_hnp;
 161         }
 162 #endif
 163
 164         omap_ohci_clock_power(priv, 1);
 165
 166         if (config->lb_reset)
 167                 config->lb_reset();
 168
 169         ret = ohci_setup(hcd);
 170         if (ret < 0)
 171                 return ret;
 172
 173         if (config->otg || config->rwc) {
 174                 ohci->hc_control = OHCI_CTRL_RWC;
 175                 writel(OHCI_CTRL_RWC, &ohci->regs->control);
 176         }
 177
 178         /* board-specific power switching and overcurrent support */
 179         if (machine_is_omap_osk() || machine_is_omap_innovator()) {
 180                 u32     rh = roothub_a (ohci);
 181
 182                 /* power switching (ganged by default) */
 183                 rh &= ~RH_A_NPS;
 184
 185                 /* TPS2045 switch for internal transceiver (port 1) */
 186                 if (machine_is_omap_osk()) {
 187                         ohci_to_hcd(ohci)->power_budget = 250;
 188
 189                         rh &= ~RH_A_NOCP;
 190
 191                         /* gpio9 for overcurrent detction */
 192                         omap_cfg_reg(W8_1610_GPIO9);
 193
 194                         /* for paranoia's sake:  disable USB.PUEN */
 195                         omap_cfg_reg(W4_USB_HIGHZ);
 196                 }
 197                 ohci_writel(ohci, rh, &ohci->regs->roothub.a);
 198                 ohci->flags &= ~OHCI_QUIRK_HUB_POWER;
 199         } else if (machine_is_nokia770()) {
 200                 /* We require a self-powered hub, which should have
 201                  * plenty of power. */
 202                 ohci_to_hcd(ohci)->power_budget = 0;
 203         }
 204
 205         /* FIXME hub_wq hub requests should manage power switching */
 206         omap_ohci_transceiver_power(priv, 1);
 207
 208         /* board init will have already handled HMC and mux setup.
 209          * any external transceiver should already be initialized
 210          * too, so all configured ports use the right signaling now.
 211          */
 212
 213         return 0;
 214 }
 215
 216 /*-------------------------------------------------------------------------*/
 217
 218 /**
 219  * ohci_hcd_omap_probe - initialize OMAP-based HCDs
 220  * @pdev:       USB controller to probe
 221  *
 222  * Context: task context, might sleep
 223  *
 224  * Allocates basic resources for this USB host controller, and
 225  * then invokes the start() method for the HCD associated with it
 226  * through the hotplug entry's driver_data.
 227  */
 228 static int ohci_hcd_omap_probe(struct platform_device *pdev)
 229 {
 230         int retval, irq;
 231         struct usb_hcd *hcd = 0;
 232         struct ohci_omap_priv *priv;
 233
 234         if (pdev->num_resources != 2) {
 235                 dev_err(&pdev->dev, "invalid num_resources: %i\n",
 236                        pdev->num_resources);
 237                 return -ENODEV;
 238         }
 239
 240         if (pdev->resource[0].flags != IORESOURCE_MEM
 241                         || pdev->resource[1].flags != IORESOURCE_IRQ) {
 242                 dev_err(&pdev->dev, "invalid resource type\n");
 243                 return -ENODEV;
 244         }
 245
 246         hcd = usb_create_hcd(&ohci_omap_hc_driver, &pdev->dev,
 247                         dev_name(&pdev->dev));
 248         if (!hcd)
 249                 return -ENOMEM;
 250
 251         hcd->rsrc_start = pdev->resource[0].start;
 252         hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
 253         priv = hcd_to_ohci_omap_priv(hcd);
 254
 255         /* Obtain two optional GPIO lines */
 256         priv->power = devm_gpiod_get_optional(&pdev->dev, "power", GPIOD_ASIS);
 257         if (IS_ERR(priv->power)) {
 258                 retval = PTR_ERR(priv->power);
 259                 goto err_put_hcd;
 260         }
 261         if (priv->power)
 262                 gpiod_set_consumer_name(priv->power, "OHCI power");
 263
 264         /*
 265          * This "overcurrent" GPIO line isn't really used in the code,
 266          * but has a designated hardware function.
 267          * TODO: implement proper overcurrent handling.
 268          */
 269         priv->overcurrent = devm_gpiod_get_optional(&pdev->dev, "overcurrent",
 270                                                     GPIOD_IN);
 271         if (IS_ERR(priv->overcurrent)) {
 272                 retval = PTR_ERR(priv->overcurrent);
 273                 goto err_put_hcd;
 274         }
 275         if (priv->overcurrent)
 276                 gpiod_set_consumer_name(priv->overcurrent, "OHCI overcurrent");
 277
 278         priv->usb_host_ck = clk_get(&pdev->dev, "usb_hhc_ck");
 279         if (IS_ERR(priv->usb_host_ck)) {
 280                 retval = PTR_ERR(priv->usb_host_ck);
 281                 goto err_put_hcd;
 282         }
 283
 284         if (!cpu_is_omap15xx())
 285                 priv->usb_dc_ck = clk_get(&pdev->dev, "usb_dc_ck");
 286         else
 287                 priv->usb_dc_ck = clk_get(&pdev->dev, "lb_ck");
 288
 289         if (IS_ERR(priv->usb_dc_ck)) {
 290                 retval = PTR_ERR(priv->usb_dc_ck);
 291                 goto err_put_host_ck;
 292         }
 293
 294         if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 295                 dev_dbg(&pdev->dev, "request_mem_region failed\n");
 296                 retval = -EBUSY;
 297                 goto err_put_dc_ck;
 298         }
 299
 300         hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
 301         if (!hcd->regs) {
 302                 dev_err(&pdev->dev, "can't ioremap OHCI HCD\n");
 303                 retval = -ENOMEM;
 304                 goto err2;
 305         }
 306
 307         irq = platform_get_irq(pdev, 0);
 308         if (irq < 0) {
 309                 retval = -ENXIO;
 310                 goto err3;
 311         }
 312         retval = usb_add_hcd(hcd, irq, 0);
 313         if (retval)
 314                 goto err3;
 315
 316         device_wakeup_enable(hcd->self.controller);
 317         return 0;
 318 err3:
 319         iounmap(hcd->regs);
 320 err2:
 321         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 322 err_put_dc_ck:
 323         clk_put(priv->usb_dc_ck);
 324 err_put_host_ck:
 325         clk_put(priv->usb_host_ck);
 326 err_put_hcd:
 327         usb_put_hcd(hcd);
 328         return retval;
 329 }
 330
 331
 332 /* may be called with controller, bus, and devices active */
 333
 334 /**
 335  * ohci_hcd_omap_remove - shutdown processing for OMAP-based HCDs
 336  * @pdev: USB Host Controller being removed
 337  *
 338  * Context: task context, might sleep
 339  *
 340  * Reverses the effect of ohci_hcd_omap_probe(), first invoking
 341  * the HCD's stop() method.  It is always called from a thread
 342  * context, normally "rmmod", "apmd", or something similar.
 343  */
 344 static int ohci_hcd_omap_remove(struct platform_device *pdev)
 345 {
 346         struct usb_hcd  *hcd = platform_get_drvdata(pdev);
 347         struct ohci_omap_priv *priv = hcd_to_ohci_omap_priv(hcd);
 348
 349         dev_dbg(hcd->self.controller, "stopping USB Controller\n");
 350         usb_remove_hcd(hcd);
 351         omap_ohci_clock_power(priv, 0);
 352         if (!IS_ERR_OR_NULL(hcd->usb_phy)) {
 353                 (void) otg_set_host(hcd->usb_phy->otg, 0);
 354                 usb_put_phy(hcd->usb_phy);
 355         }
 356         iounmap(hcd->regs);
 357         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 358         clk_put(priv->usb_dc_ck);
 359         clk_put(priv->usb_host_ck);
 360         usb_put_hcd(hcd);
 361         return 0;
 362 }
 363
 364 /*-------------------------------------------------------------------------*/
 365
 366 #ifdef  CONFIG_PM
 367
 368 static int ohci_omap_suspend(struct platform_device *pdev, pm_message_t message)
 369 {
 370         struct usb_hcd *hcd = platform_get_drvdata(pdev);
 371         struct ohci_hcd *ohci = hcd_to_ohci(hcd);
 372         struct ohci_omap_priv *priv = hcd_to_ohci_omap_priv(hcd);
 373         bool do_wakeup = device_may_wakeup(&pdev->dev);
 374         int ret;
 375
 376         if (time_before(jiffies, ohci->next_statechange))
 377                 msleep(5);
 378         ohci->next_statechange = jiffies;
 379
 380         ret = ohci_suspend(hcd, do_wakeup);
 381         if (ret)
 382                 return ret;
 383
 384         omap_ohci_clock_power(priv, 0);
 385         return ret;
 386 }
 387
 388 static int ohci_omap_resume(struct platform_device *dev)
 389 {
 390         struct usb_hcd  *hcd = platform_get_drvdata(dev);
 391         struct ohci_hcd *ohci = hcd_to_ohci(hcd);
 392         struct ohci_omap_priv *priv = hcd_to_ohci_omap_priv(hcd);
 393
 394         if (time_before(jiffies, ohci->next_statechange))
 395                 msleep(5);
 396         ohci->next_statechange = jiffies;
 397
 398         omap_ohci_clock_power(priv, 1);
 399         ohci_resume(hcd, false);
 400         return 0;
 401 }
 402
 403 #endif
 404
 405 /*-------------------------------------------------------------------------*/
 406
 407 /*
 408  * Driver definition to register with the OMAP bus
 409  */
 410 static struct platform_driver ohci_hcd_omap_driver = {
 411         .probe          = ohci_hcd_omap_probe,
 412         .remove         = ohci_hcd_omap_remove,
 413         .shutdown       = usb_hcd_platform_shutdown,
 414 #ifdef  CONFIG_PM
 415         .suspend        = ohci_omap_suspend,
 416         .resume         = ohci_omap_resume,
 417 #endif
 418         .driver         = {
 419                 .name   = "ohci",
 420         },
 421 };
 422
 423 static const struct ohci_driver_overrides omap_overrides __initconst = {
 424         .product_desc   = "OMAP OHCI",
 425         .reset          = ohci_omap_reset,
 426         .extra_priv_size = sizeof(struct ohci_omap_priv),
 427 };
 428
 429 static int __init ohci_omap_init(void)
 430 {
 431         if (usb_disabled())
 432                 return -ENODEV;
 433
 434         pr_info("%s: " DRIVER_DESC "\n", hcd_name);
 435
 436         ohci_init_driver(&ohci_omap_hc_driver, &omap_overrides);
 437         return platform_driver_register(&ohci_hcd_omap_driver);
 438 }
 439 module_init(ohci_omap_init);
 440
 441 static void __exit ohci_omap_cleanup(void)
 442 {
 443         platform_driver_unregister(&ohci_hcd_omap_driver);
 444 }
 445 module_exit(ohci_omap_cleanup);
 446
 447 MODULE_DESCRIPTION(DRIVER_DESC);
 448 MODULE_ALIAS("platform:ohci");
 449 MODULE_LICENSE("GPL");