2 * URB OHCI HCD (Host Controller Driver) for USB on the AT91RM9200 and PCI bus.
4 * Interrupt support is added. Now, it has been tested
5 * on ULI1575 chip and works well with USB keyboard.
8 * Zhang Wei, Freescale Semiconductor, Inc. <wei.zhang@freescale.com>
11 * Gary Jennejohn, DENX Software Engineering <garyj@denx.de>
13 * Note: Much of this code has been derived from Linux 2.4
14 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
15 * (C) Copyright 2000-2002 David Brownell
17 * Modified for the MP2USB by (C) Copyright 2005 Eric Benard
18 * ebenard@eukrea.com - based on s3c24x0's driver
20 * See file CREDITS for list of people who contributed to this
23 * This program is free software; you can redistribute it and/or
24 * modify it under the terms of the GNU General Public License as
25 * published by the Free Software Foundation; either version 2 of
26 * the License, or (at your option) any later version.
28 * This program is distributed in the hope that it will be useful,
29 * but WITHOUT ANY WARRANTY; without even the implied warranty of
30 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
31 * GNU General Public License for more details.
33 * You should have received a copy of the GNU General Public License
34 * along with this program; if not, write to the Free Software
35 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
41 * 1 - Read doc/README.generic_usb_ohci
42 * 2 - this driver is intended for use with USB Mass Storage Devices
43 * (BBB) and USB keyboard. There is NO support for Isochronous pipes!
44 * 2 - when running on a PQFP208 AT91RM9200, define CONFIG_AT91C_PQFP_UHPBUG
45 * to activate workaround for bug #41 or this driver will NOT work!
49 #include <asm/byteorder.h>
51 #if defined(CONFIG_PCI_OHCI)
53 #if !defined(CONFIG_PCI_OHCI_DEVNO)
54 #define CONFIG_PCI_OHCI_DEVNO 0
63 #ifdef CONFIG_AT91RM9200
64 #include <asm/arch/hardware.h> /* needed for AT91_USB_HOST_BASE */
67 #if defined(CONFIG_ARM920T) || \
68 defined(CONFIG_S3C24X0) || \
69 defined(CONFIG_S3C6400) || \
70 defined(CONFIG_440EP) || \
71 defined(CONFIG_PCI_OHCI) || \
72 defined(CONFIG_MPC5200) || \
73 defined(CONFIG_SYS_OHCI_USE_NPS)
74 # define OHCI_USE_NPS /* force NoPowerSwitching mode */
77 #undef OHCI_VERBOSE_DEBUG /* not always helpful */
80 #undef OHCI_FILL_TRACE
82 /* For initializing controller (mask in an HCFS mode too) */
83 #define OHCI_CONTROL_INIT \
84 (OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
86 #define min_t(type, x, y) \
87 ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
89 #ifdef CONFIG_PCI_OHCI
90 static struct pci_device_id ohci_pci_ids[] = {
91 {0x10b9, 0x5237}, /* ULI1575 PCI OHCI module ids */
92 {0x1033, 0x0035}, /* NEC PCI OHCI module ids */
93 {0x1131, 0x1561}, /* Philips 1561 PCI OHCI module ids */
94 /* Please add supported PCI OHCI controller ids here */
99 #ifdef CONFIG_PCI_EHCI_DEVNO
100 static struct pci_device_id ehci_pci_ids[] = {
101 {0x1131, 0x1562}, /* Philips 1562 PCI EHCI module ids */
102 /* Please add supported PCI EHCI controller ids here */
108 #define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
110 #define dbg(format, arg...) do {} while (0)
112 #define err(format, arg...) printf("ERROR: " format "\n", ## arg)
114 #define info(format, arg...) printf("INFO: " format "\n", ## arg)
116 #define info(format, arg...) do {} while (0)
119 #ifdef CONFIG_SYS_OHCI_BE_CONTROLLER
120 # define m16_swap(x) cpu_to_be16(x)
121 # define m32_swap(x) cpu_to_be32(x)
123 # define m16_swap(x) cpu_to_le16(x)
124 # define m32_swap(x) cpu_to_le32(x)
125 #endif /* CONFIG_SYS_OHCI_BE_CONTROLLER */
129 /* this must be aligned to a 256 byte boundary */
130 struct ohci_hcca ghcca[1];
131 /* a pointer to the aligned storage */
132 struct ohci_hcca *phcca;
133 /* this allocates EDs for all possible endpoints */
134 struct ohci_device ohci_dev;
135 /* device which was disconnected */
136 struct usb_device *devgone;
138 static inline u32 roothub_a(struct ohci *hc)
139 { return ohci_readl(&hc->regs->roothub.a); }
140 static inline u32 roothub_b(struct ohci *hc)
141 { return ohci_readl(&hc->regs->roothub.b); }
142 static inline u32 roothub_status(struct ohci *hc)
143 { return ohci_readl(&hc->regs->roothub.status); }
144 static inline u32 roothub_portstatus(struct ohci *hc, int i)
145 { return ohci_readl(&hc->regs->roothub.portstatus[i]); }
147 /* forward declaration */
148 static int hc_interrupt(void);
149 static void td_submit_job(struct usb_device *dev, unsigned long pipe,
150 void *buffer, int transfer_len,
151 struct devrequest *setup, urb_priv_t *urb,
154 /*-------------------------------------------------------------------------*
155 * URB support functions
156 *-------------------------------------------------------------------------*/
158 /* free HCD-private data associated with this URB */
160 static void urb_free_priv(urb_priv_t *urb)
166 last = urb->length - 1;
168 for (i = 0; i <= last; i++) {
179 /*-------------------------------------------------------------------------*/
182 static int sohci_get_current_frame_number(struct usb_device *dev);
184 /* debug| print the main components of an URB
185 * small: 0) header + data packets 1) just header */
187 static void pkt_print(urb_priv_t *purb, struct usb_device *dev,
188 unsigned long pipe, void *buffer, int transfer_len,
189 struct devrequest *setup, char *str, int small)
191 dbg("%s URB:[%4x] dev:%2lu,ep:%2lu-%c,type:%s,len:%d/%d stat:%#lx",
193 sohci_get_current_frame_number(dev),
194 usb_pipedevice(pipe),
195 usb_pipeendpoint(pipe),
196 usb_pipeout(pipe)? 'O': 'I',
197 usb_pipetype(pipe) < 2 ? \
198 (usb_pipeint(pipe)? "INTR": "ISOC"): \
199 (usb_pipecontrol(pipe)? "CTRL": "BULK"),
200 (purb ? purb->actual_length : 0),
201 transfer_len, dev->status);
202 #ifdef OHCI_VERBOSE_DEBUG
206 if (usb_pipecontrol(pipe)) {
207 printf(__FILE__ ": cmd(8):");
208 for (i = 0; i < 8 ; i++)
209 printf(" %02x", ((__u8 *) setup) [i]);
212 if (transfer_len > 0 && buffer) {
213 printf(__FILE__ ": data(%d/%d):",
214 (purb ? purb->actual_length : 0),
216 len = usb_pipeout(pipe)? transfer_len:
217 (purb ? purb->actual_length : 0);
218 for (i = 0; i < 16 && i < len; i++)
219 printf(" %02x", ((__u8 *) buffer) [i]);
220 printf("%s\n", i < len? "...": "");
226 /* just for debugging; prints non-empty branches of the int ed tree
227 * inclusive iso eds */
228 void ep_print_int_eds(ohci_t *ohci, char *str)
232 for (i = 0; i < 32; i++) {
234 ed_p = &(ohci->hcca->int_table [i]);
237 printf(__FILE__ ": %s branch int %2d(%2x):", str, i, i);
238 while (*ed_p != 0 && j--) {
239 ed_t *ed = (ed_t *)m32_swap(ed_p);
240 printf(" ed: %4x;", ed->hwINFO);
241 ed_p = &ed->hwNextED;
247 static void ohci_dump_intr_mask(char *label, __u32 mask)
249 dbg("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
252 (mask & OHCI_INTR_MIE) ? " MIE" : "",
253 (mask & OHCI_INTR_OC) ? " OC" : "",
254 (mask & OHCI_INTR_RHSC) ? " RHSC" : "",
255 (mask & OHCI_INTR_FNO) ? " FNO" : "",
256 (mask & OHCI_INTR_UE) ? " UE" : "",
257 (mask & OHCI_INTR_RD) ? " RD" : "",
258 (mask & OHCI_INTR_SF) ? " SF" : "",
259 (mask & OHCI_INTR_WDH) ? " WDH" : "",
260 (mask & OHCI_INTR_SO) ? " SO" : ""
264 static void maybe_print_eds(char *label, __u32 value)
266 ed_t *edp = (ed_t *)value;
269 dbg("%s %08x", label, value);
270 dbg("%08x", edp->hwINFO);
271 dbg("%08x", edp->hwTailP);
272 dbg("%08x", edp->hwHeadP);
273 dbg("%08x", edp->hwNextED);
277 static char *hcfs2string(int state)
280 case OHCI_USB_RESET: return "reset";
281 case OHCI_USB_RESUME: return "resume";
282 case OHCI_USB_OPER: return "operational";
283 case OHCI_USB_SUSPEND: return "suspend";
288 /* dump control and status registers */
289 static void ohci_dump_status(ohci_t *controller)
291 struct ohci_regs *regs = controller->regs;
294 temp = ohci_readl(®s->revision) & 0xff;
296 dbg("spec %d.%d", (temp >> 4), (temp & 0x0f));
298 temp = ohci_readl(®s->control);
299 dbg("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
300 (temp & OHCI_CTRL_RWE) ? " RWE" : "",
301 (temp & OHCI_CTRL_RWC) ? " RWC" : "",
302 (temp & OHCI_CTRL_IR) ? " IR" : "",
303 hcfs2string(temp & OHCI_CTRL_HCFS),
304 (temp & OHCI_CTRL_BLE) ? " BLE" : "",
305 (temp & OHCI_CTRL_CLE) ? " CLE" : "",
306 (temp & OHCI_CTRL_IE) ? " IE" : "",
307 (temp & OHCI_CTRL_PLE) ? " PLE" : "",
308 temp & OHCI_CTRL_CBSR
311 temp = ohci_readl(®s->cmdstatus);
312 dbg("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
313 (temp & OHCI_SOC) >> 16,
314 (temp & OHCI_OCR) ? " OCR" : "",
315 (temp & OHCI_BLF) ? " BLF" : "",
316 (temp & OHCI_CLF) ? " CLF" : "",
317 (temp & OHCI_HCR) ? " HCR" : ""
320 ohci_dump_intr_mask("intrstatus", ohci_readl(®s->intrstatus));
321 ohci_dump_intr_mask("intrenable", ohci_readl(®s->intrenable));
323 maybe_print_eds("ed_periodcurrent",
324 ohci_readl(®s->ed_periodcurrent));
326 maybe_print_eds("ed_controlhead", ohci_readl(®s->ed_controlhead));
327 maybe_print_eds("ed_controlcurrent",
328 ohci_readl(®s->ed_controlcurrent));
330 maybe_print_eds("ed_bulkhead", ohci_readl(®s->ed_bulkhead));
331 maybe_print_eds("ed_bulkcurrent", ohci_readl(®s->ed_bulkcurrent));
333 maybe_print_eds("donehead", ohci_readl(®s->donehead));
336 static void ohci_dump_roothub(ohci_t *controller, int verbose)
340 temp = roothub_a(controller);
341 ndp = (temp & RH_A_NDP);
342 #ifdef CONFIG_AT91C_PQFP_UHPBUG
343 ndp = (ndp == 2) ? 1:0;
346 dbg("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
347 ((temp & RH_A_POTPGT) >> 24) & 0xff,
348 (temp & RH_A_NOCP) ? " NOCP" : "",
349 (temp & RH_A_OCPM) ? " OCPM" : "",
350 (temp & RH_A_DT) ? " DT" : "",
351 (temp & RH_A_NPS) ? " NPS" : "",
352 (temp & RH_A_PSM) ? " PSM" : "",
355 temp = roothub_b(controller);
356 dbg("roothub.b: %08x PPCM=%04x DR=%04x",
358 (temp & RH_B_PPCM) >> 16,
361 temp = roothub_status(controller);
362 dbg("roothub.status: %08x%s%s%s%s%s%s",
364 (temp & RH_HS_CRWE) ? " CRWE" : "",
365 (temp & RH_HS_OCIC) ? " OCIC" : "",
366 (temp & RH_HS_LPSC) ? " LPSC" : "",
367 (temp & RH_HS_DRWE) ? " DRWE" : "",
368 (temp & RH_HS_OCI) ? " OCI" : "",
369 (temp & RH_HS_LPS) ? " LPS" : ""
373 for (i = 0; i < ndp; i++) {
374 temp = roothub_portstatus(controller, i);
375 dbg("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
378 (temp & RH_PS_PRSC) ? " PRSC" : "",
379 (temp & RH_PS_OCIC) ? " OCIC" : "",
380 (temp & RH_PS_PSSC) ? " PSSC" : "",
381 (temp & RH_PS_PESC) ? " PESC" : "",
382 (temp & RH_PS_CSC) ? " CSC" : "",
384 (temp & RH_PS_LSDA) ? " LSDA" : "",
385 (temp & RH_PS_PPS) ? " PPS" : "",
386 (temp & RH_PS_PRS) ? " PRS" : "",
387 (temp & RH_PS_POCI) ? " POCI" : "",
388 (temp & RH_PS_PSS) ? " PSS" : "",
390 (temp & RH_PS_PES) ? " PES" : "",
391 (temp & RH_PS_CCS) ? " CCS" : ""
396 static void ohci_dump(ohci_t *controller, int verbose)
398 dbg("OHCI controller usb-%s state", controller->slot_name);
400 /* dumps some of the state we know about */
401 ohci_dump_status(controller);
403 ep_print_int_eds(controller, "hcca");
404 dbg("hcca frame #%04x", controller->hcca->frame_no);
405 ohci_dump_roothub(controller, 1);
409 /*-------------------------------------------------------------------------*
410 * Interface functions (URB)
411 *-------------------------------------------------------------------------*/
413 /* get a transfer request */
415 int sohci_submit_job(urb_priv_t *urb, struct devrequest *setup)
419 urb_priv_t *purb_priv = urb;
421 struct usb_device *dev = urb->dev;
422 unsigned long pipe = urb->pipe;
423 void *buffer = urb->transfer_buffer;
424 int transfer_len = urb->transfer_buffer_length;
425 int interval = urb->interval;
429 /* when controller's hung, permit only roothub cleanup attempts
430 * such as powering down ports */
431 if (ohci->disabled) {
432 err("sohci_submit_job: EPIPE");
436 /* we're about to begin a new transaction here so mark the
440 /* every endpoint has a ed, locate and fill it */
441 ed = ep_add_ed(dev, pipe, interval, 1);
443 err("sohci_submit_job: ENOMEM");
447 /* for the private part of the URB we need the number of TDs (size) */
448 switch (usb_pipetype(pipe)) {
449 case PIPE_BULK: /* one TD for every 4096 Byte */
450 size = (transfer_len - 1) / 4096 + 1;
452 case PIPE_CONTROL:/* 1 TD for setup, 1 for ACK and 1 for every 4096 B */
453 size = (transfer_len == 0)? 2:
454 (transfer_len - 1) / 4096 + 3;
456 case PIPE_INTERRUPT: /* 1 TD */
463 if (size >= (N_URB_TD - 1)) {
464 err("need %d TDs, only have %d", size, N_URB_TD);
467 purb_priv->pipe = pipe;
469 /* fill the private part of the URB */
470 purb_priv->length = size;
472 purb_priv->actual_length = 0;
474 /* allocate the TDs */
475 /* note that td[0] was allocated in ep_add_ed */
476 for (i = 0; i < size; i++) {
477 purb_priv->td[i] = td_alloc(dev);
478 if (!purb_priv->td[i]) {
479 purb_priv->length = i;
480 urb_free_priv(purb_priv);
481 err("sohci_submit_job: ENOMEM");
486 if (ed->state == ED_NEW || (ed->state & ED_DEL)) {
487 urb_free_priv(purb_priv);
488 err("sohci_submit_job: EINVAL");
492 /* link the ed into a chain if is not already */
493 if (ed->state != ED_OPER)
496 /* fill the TDs and link it to the ed */
497 td_submit_job(dev, pipe, buffer, transfer_len,
498 setup, purb_priv, interval);
503 static inline int sohci_return_job(struct ohci *hc, urb_priv_t *urb)
505 struct ohci_regs *regs = hc->regs;
507 switch (usb_pipetype(urb->pipe)) {
509 /* implicitly requeued */
510 if (urb->dev->irq_handle &&
511 (urb->dev->irq_act_len = urb->actual_length)) {
512 ohci_writel(OHCI_INTR_WDH, ®s->intrenable);
513 ohci_readl(®s->intrenable); /* PCI posting flush */
514 urb->dev->irq_handle(urb->dev);
515 ohci_writel(OHCI_INTR_WDH, ®s->intrdisable);
516 ohci_readl(®s->intrdisable); /* PCI posting flush */
518 urb->actual_length = 0;
522 urb->transfer_buffer,
523 urb->transfer_buffer_length,
537 /*-------------------------------------------------------------------------*/
540 /* tell us the current USB frame number */
542 static int sohci_get_current_frame_number(struct usb_device *usb_dev)
544 ohci_t *ohci = &gohci;
546 return m16_swap(ohci->hcca->frame_no);
550 /*-------------------------------------------------------------------------*
551 * ED handling functions
552 *-------------------------------------------------------------------------*/
554 /* search for the right branch to insert an interrupt ed into the int tree
555 * do some load ballancing;
556 * returns the branch and
557 * sets the interval to interval = 2^integer (ld (interval)) */
559 static int ep_int_ballance(ohci_t *ohci, int interval, int load)
563 /* search for the least loaded interrupt endpoint
564 * branch of all 32 branches
566 for (i = 0; i < 32; i++)
567 if (ohci->ohci_int_load [branch] > ohci->ohci_int_load [i])
570 branch = branch % interval;
571 for (i = branch; i < 32; i += interval)
572 ohci->ohci_int_load [i] += load;
577 /*-------------------------------------------------------------------------*/
579 /* 2^int( ld (inter)) */
581 static int ep_2_n_interval(int inter)
584 for (i = 0; ((inter >> i) > 1) && (i < 5); i++);
588 /*-------------------------------------------------------------------------*/
590 /* the int tree is a binary tree
591 * in order to process it sequentially the indexes of the branches have to
592 * be mapped the mapping reverses the bits of a word of num_bits length */
593 static int ep_rev(int num_bits, int word)
597 for (i = 0; i < num_bits; i++)
598 wout |= (((word >> i) & 1) << (num_bits - i - 1));
602 /*-------------------------------------------------------------------------*
603 * ED handling functions
604 *-------------------------------------------------------------------------*/
606 /* link an ed into one of the HC chains */
608 static int ep_link(ohci_t *ohci, ed_t *edi)
610 volatile ed_t *ed = edi;
619 ed->int_interval = 0;
624 if (ohci->ed_controltail == NULL)
625 ohci_writel(ed, &ohci->regs->ed_controlhead);
627 ohci->ed_controltail->hwNextED =
628 m32_swap((unsigned long)ed);
630 ed->ed_prev = ohci->ed_controltail;
631 if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
632 !ohci->ed_rm_list[1] && !ohci->sleeping) {
633 ohci->hc_control |= OHCI_CTRL_CLE;
634 ohci_writel(ohci->hc_control, &ohci->regs->control);
636 ohci->ed_controltail = edi;
641 if (ohci->ed_bulktail == NULL)
642 ohci_writel(ed, &ohci->regs->ed_bulkhead);
644 ohci->ed_bulktail->hwNextED =
645 m32_swap((unsigned long)ed);
647 ed->ed_prev = ohci->ed_bulktail;
648 if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
649 !ohci->ed_rm_list[1] && !ohci->sleeping) {
650 ohci->hc_control |= OHCI_CTRL_BLE;
651 ohci_writel(ohci->hc_control, &ohci->regs->control);
653 ohci->ed_bulktail = edi;
658 interval = ep_2_n_interval(ed->int_period);
659 ed->int_interval = interval;
660 int_branch = ep_int_ballance(ohci, interval, load);
661 ed->int_branch = int_branch;
663 for (i = 0; i < ep_rev(6, interval); i += inter) {
665 for (ed_p = &(ohci->hcca->int_table[\
666 ep_rev(5, i) + int_branch]);
668 (((ed_t *)ed_p)->int_interval >= interval);
669 ed_p = &(((ed_t *)ed_p)->hwNextED))
671 ((ed_t *)ed_p)->int_interval);
672 ed->hwNextED = *ed_p;
673 *ed_p = m32_swap((unsigned long)ed);
680 /*-------------------------------------------------------------------------*/
682 /* scan the periodic table to find and unlink this ED */
683 static void periodic_unlink(struct ohci *ohci, volatile struct ed *ed,
684 unsigned index, unsigned period)
686 for (; index < NUM_INTS; index += period) {
687 __u32 *ed_p = &ohci->hcca->int_table [index];
689 /* ED might have been unlinked through another path */
692 m32_swap((unsigned long)ed_p)) == ed) {
693 *ed_p = ed->hwNextED;
696 ed_p = &(((struct ed *)
697 m32_swap((unsigned long)ed_p))->hwNextED);
702 /* unlink an ed from one of the HC chains.
703 * just the link to the ed is unlinked.
704 * the link from the ed still points to another operational ed or 0
705 * so the HC can eventually finish the processing of the unlinked ed */
707 static int ep_unlink(ohci_t *ohci, ed_t *edi)
709 volatile ed_t *ed = edi;
712 ed->hwINFO |= m32_swap(OHCI_ED_SKIP);
716 if (ed->ed_prev == NULL) {
718 ohci->hc_control &= ~OHCI_CTRL_CLE;
719 ohci_writel(ohci->hc_control,
720 &ohci->regs->control);
722 ohci_writel(m32_swap(*((__u32 *)&ed->hwNextED)),
723 &ohci->regs->ed_controlhead);
725 ed->ed_prev->hwNextED = ed->hwNextED;
727 if (ohci->ed_controltail == ed) {
728 ohci->ed_controltail = ed->ed_prev;
731 *((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
736 if (ed->ed_prev == NULL) {
738 ohci->hc_control &= ~OHCI_CTRL_BLE;
739 ohci_writel(ohci->hc_control,
740 &ohci->regs->control);
742 ohci_writel(m32_swap(*((__u32 *)&ed->hwNextED)),
743 &ohci->regs->ed_bulkhead);
745 ed->ed_prev->hwNextED = ed->hwNextED;
747 if (ohci->ed_bulktail == ed) {
748 ohci->ed_bulktail = ed->ed_prev;
751 *((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
756 periodic_unlink(ohci, ed, 0, 1);
757 for (i = ed->int_branch; i < 32; i += ed->int_interval)
758 ohci->ohci_int_load[i] -= ed->int_load;
761 ed->state = ED_UNLINK;
765 /*-------------------------------------------------------------------------*/
767 /* add/reinit an endpoint; this should be done once at the
768 * usb_set_configuration command, but the USB stack is a little bit
769 * stateless so we do it at every transaction if the state of the ed
770 * is ED_NEW then a dummy td is added and the state is changed to
771 * ED_UNLINK in all other cases the state is left unchanged the ed
772 * info fields are setted anyway even though most of them should not
775 static ed_t *ep_add_ed(struct usb_device *usb_dev, unsigned long pipe,
776 int interval, int load)
782 ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint(pipe) << 1) |
783 (usb_pipecontrol(pipe)? 0: usb_pipeout(pipe))];
785 if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) {
786 err("ep_add_ed: pending delete");
787 /* pending delete request */
791 if (ed->state == ED_NEW) {
792 /* dummy td; end of td list for ed */
793 td = td_alloc(usb_dev);
794 ed->hwTailP = m32_swap((unsigned long)td);
795 ed->hwHeadP = ed->hwTailP;
796 ed->state = ED_UNLINK;
797 ed->type = usb_pipetype(pipe);
801 ed->hwINFO = m32_swap(usb_pipedevice(pipe)
802 | usb_pipeendpoint(pipe) << 7
803 | (usb_pipeisoc(pipe)? 0x8000: 0)
804 | (usb_pipecontrol(pipe)? 0: \
805 (usb_pipeout(pipe)? 0x800: 0x1000))
806 | usb_pipeslow(pipe) << 13
807 | usb_maxpacket(usb_dev, pipe) << 16);
809 if (ed->type == PIPE_INTERRUPT && ed->state == ED_UNLINK) {
810 ed->int_period = interval;
817 /*-------------------------------------------------------------------------*
818 * TD handling functions
819 *-------------------------------------------------------------------------*/
821 /* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
823 static void td_fill(ohci_t *ohci, unsigned int info,
825 struct usb_device *dev, int index, urb_priv_t *urb_priv)
827 volatile td_t *td, *td_pt;
828 #ifdef OHCI_FILL_TRACE
832 if (index > urb_priv->length) {
833 err("index > length");
836 /* use this td as the next dummy */
837 td_pt = urb_priv->td [index];
840 /* fill the old dummy TD */
841 td = urb_priv->td [index] =
842 (td_t *)(m32_swap(urb_priv->ed->hwTailP) & ~0xf);
844 td->ed = urb_priv->ed;
845 td->next_dl_td = NULL;
847 td->data = (__u32)data;
848 #ifdef OHCI_FILL_TRACE
849 if (usb_pipebulk(urb_priv->pipe) && usb_pipeout(urb_priv->pipe)) {
850 for (i = 0; i < len; i++)
851 printf("td->data[%d] %#2x ", i, ((unsigned char *)td->data)[i]);
858 td->hwINFO = m32_swap(info);
859 td->hwCBP = m32_swap((unsigned long)data);
861 td->hwBE = m32_swap((unsigned long)(data + len - 1));
865 td->hwNextTD = m32_swap((unsigned long)td_pt);
867 /* append to queue */
868 td->ed->hwTailP = td->hwNextTD;
871 /*-------------------------------------------------------------------------*/
873 /* prepare all TDs of a transfer */
875 static void td_submit_job(struct usb_device *dev, unsigned long pipe,
876 void *buffer, int transfer_len,
877 struct devrequest *setup, urb_priv_t *urb,
880 ohci_t *ohci = &gohci;
881 int data_len = transfer_len;
885 unsigned int toggle = 0;
887 /* OHCI handles the DATA-toggles itself, we just use the USB-toggle
888 * bits for reseting */
889 if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
890 toggle = TD_T_TOGGLE;
893 usb_settoggle(dev, usb_pipeendpoint(pipe),
894 usb_pipeout(pipe), 1);
902 switch (usb_pipetype(pipe)) {
904 info = usb_pipeout(pipe)?
905 TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ;
906 while (data_len > 4096) {
907 td_fill(ohci, info | (cnt? TD_T_TOGGLE:toggle),
908 data, 4096, dev, cnt, urb);
909 data += 4096; data_len -= 4096; cnt++;
911 info = usb_pipeout(pipe)?
912 TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ;
913 td_fill(ohci, info | (cnt? TD_T_TOGGLE:toggle), data,
914 data_len, dev, cnt, urb);
917 if (!ohci->sleeping) {
918 /* start bulk list */
919 ohci_writel(OHCI_BLF, &ohci->regs->cmdstatus);
925 info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
926 td_fill(ohci, info, setup, 8, dev, cnt++, urb);
928 /* Optional Data phase */
930 info = usb_pipeout(pipe)?
931 TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 :
932 TD_CC | TD_R | TD_DP_IN | TD_T_DATA1;
933 /* NOTE: mishandles transfers >8K, some >4K */
934 td_fill(ohci, info, data, data_len, dev, cnt++, urb);
938 info = usb_pipeout(pipe)?
939 TD_CC | TD_DP_IN | TD_T_DATA1:
940 TD_CC | TD_DP_OUT | TD_T_DATA1;
941 td_fill(ohci, info, data, 0, dev, cnt++, urb);
943 if (!ohci->sleeping) {
944 /* start Control list */
945 ohci_writel(OHCI_CLF, &ohci->regs->cmdstatus);
950 info = usb_pipeout(urb->pipe)?
951 TD_CC | TD_DP_OUT | toggle:
952 TD_CC | TD_R | TD_DP_IN | toggle;
953 td_fill(ohci, info, data, data_len, dev, cnt++, urb);
956 if (urb->length != cnt)
957 dbg("TD LENGTH %d != CNT %d", urb->length, cnt);
960 /*-------------------------------------------------------------------------*
961 * Done List handling functions
962 *-------------------------------------------------------------------------*/
964 /* calculate the transfer length and update the urb */
966 static void dl_transfer_length(td_t *td)
969 urb_priv_t *lurb_priv = td->ed->purb;
971 tdBE = m32_swap(td->hwBE);
972 tdCBP = m32_swap(td->hwCBP);
974 if (!(usb_pipecontrol(lurb_priv->pipe) &&
975 ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
978 lurb_priv->actual_length += tdBE - td->data + 1;
980 lurb_priv->actual_length += tdCBP - td->data;
985 /*-------------------------------------------------------------------------*/
986 static void check_status(td_t *td_list)
988 urb_priv_t *lurb_priv = td_list->ed->purb;
989 int urb_len = lurb_priv->length;
990 __u32 *phwHeadP = &td_list->ed->hwHeadP;
993 cc = TD_CC_GET(m32_swap(td_list->hwINFO));
995 err(" USB-error: %s (%x)", cc_to_string[cc], cc);
997 if (*phwHeadP & m32_swap(0x1)) {
999 ((td_list->index + 1) < urb_len)) {
1001 (lurb_priv->td[urb_len - 1]->hwNextTD &\
1002 m32_swap(0xfffffff0)) |
1003 (*phwHeadP & m32_swap(0x2));
1005 lurb_priv->td_cnt += urb_len -
1008 *phwHeadP &= m32_swap(0xfffffff2);
1010 #ifdef CONFIG_MPC5200
1011 td_list->hwNextTD = 0;
1016 /* replies to the request have to be on a FIFO basis so
1017 * we reverse the reversed done-list */
1018 static td_t *dl_reverse_done_list(ohci_t *ohci)
1021 td_t *td_rev = NULL;
1022 td_t *td_list = NULL;
1024 td_list_hc = m32_swap(ohci->hcca->done_head) & 0xfffffff0;
1025 ohci->hcca->done_head = 0;
1027 while (td_list_hc) {
1028 td_list = (td_t *)td_list_hc;
1029 check_status(td_list);
1030 td_list->next_dl_td = td_rev;
1032 td_list_hc = m32_swap(td_list->hwNextTD) & 0xfffffff0;
1037 /*-------------------------------------------------------------------------*/
1038 /*-------------------------------------------------------------------------*/
1040 static void finish_urb(ohci_t *ohci, urb_priv_t *urb, int status)
1042 if ((status & (ED_OPER | ED_UNLINK)) && (urb->state != URB_DEL))
1043 urb->finished = sohci_return_job(ohci, urb);
1045 dbg("finish_urb: strange.., ED state %x, \n", status);
1049 * Used to take back a TD from the host controller. This would normally be
1050 * called from within dl_done_list, however it may be called directly if the
1051 * HC no longer sees the TD and it has not appeared on the donelist (after
1052 * two frames). This bug has been observed on ZF Micro systems.
1054 static int takeback_td(ohci_t *ohci, td_t *td_list)
1060 urb_priv_t *lurb_priv;
1061 __u32 tdINFO, edHeadP, edTailP;
1063 tdINFO = m32_swap(td_list->hwINFO);
1066 lurb_priv = ed->purb;
1068 dl_transfer_length(td_list);
1070 lurb_priv->td_cnt++;
1072 /* error code of transfer */
1073 cc = TD_CC_GET(tdINFO);
1075 err("USB-error: %s (%x)", cc_to_string[cc], cc);
1076 stat = cc_to_error[cc];
1079 /* see if this done list makes for all TD's of current URB,
1080 * and mark the URB finished if so */
1081 if (lurb_priv->td_cnt == lurb_priv->length)
1082 finish_urb(ohci, lurb_priv, ed->state);
1084 dbg("dl_done_list: processing TD %x, len %x\n",
1085 lurb_priv->td_cnt, lurb_priv->length);
1087 if (ed->state != ED_NEW && (!usb_pipeint(lurb_priv->pipe))) {
1088 edHeadP = m32_swap(ed->hwHeadP) & 0xfffffff0;
1089 edTailP = m32_swap(ed->hwTailP);
1091 /* unlink eds if they are not busy */
1092 if ((edHeadP == edTailP) && (ed->state == ED_OPER))
1093 ep_unlink(ohci, ed);
1098 static int dl_done_list(ohci_t *ohci)
1101 td_t *td_list = dl_reverse_done_list(ohci);
1104 td_t *td_next = td_list->next_dl_td;
1105 stat = takeback_td(ohci, td_list);
1111 /*-------------------------------------------------------------------------*
1113 *-------------------------------------------------------------------------*/
1115 /* Device descriptor */
1116 static __u8 root_hub_dev_des[] =
1118 0x12, /* __u8 bLength; */
1119 0x01, /* __u8 bDescriptorType; Device */
1120 0x10, /* __u16 bcdUSB; v1.1 */
1122 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
1123 0x00, /* __u8 bDeviceSubClass; */
1124 0x00, /* __u8 bDeviceProtocol; */
1125 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
1126 0x00, /* __u16 idVendor; */
1128 0x00, /* __u16 idProduct; */
1130 0x00, /* __u16 bcdDevice; */
1132 0x00, /* __u8 iManufacturer; */
1133 0x01, /* __u8 iProduct; */
1134 0x00, /* __u8 iSerialNumber; */
1135 0x01 /* __u8 bNumConfigurations; */
1138 /* Configuration descriptor */
1139 static __u8 root_hub_config_des[] =
1141 0x09, /* __u8 bLength; */
1142 0x02, /* __u8 bDescriptorType; Configuration */
1143 0x19, /* __u16 wTotalLength; */
1145 0x01, /* __u8 bNumInterfaces; */
1146 0x01, /* __u8 bConfigurationValue; */
1147 0x00, /* __u8 iConfiguration; */
1148 0x40, /* __u8 bmAttributes;
1149 Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
1150 0x00, /* __u8 MaxPower; */
1153 0x09, /* __u8 if_bLength; */
1154 0x04, /* __u8 if_bDescriptorType; Interface */
1155 0x00, /* __u8 if_bInterfaceNumber; */
1156 0x00, /* __u8 if_bAlternateSetting; */
1157 0x01, /* __u8 if_bNumEndpoints; */
1158 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
1159 0x00, /* __u8 if_bInterfaceSubClass; */
1160 0x00, /* __u8 if_bInterfaceProtocol; */
1161 0x00, /* __u8 if_iInterface; */
1164 0x07, /* __u8 ep_bLength; */
1165 0x05, /* __u8 ep_bDescriptorType; Endpoint */
1166 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
1167 0x03, /* __u8 ep_bmAttributes; Interrupt */
1168 0x02, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
1170 0xff /* __u8 ep_bInterval; 255 ms */
1173 static unsigned char root_hub_str_index0[] =
1175 0x04, /* __u8 bLength; */
1176 0x03, /* __u8 bDescriptorType; String-descriptor */
1177 0x09, /* __u8 lang ID */
1178 0x04, /* __u8 lang ID */
1181 static unsigned char root_hub_str_index1[] =
1183 28, /* __u8 bLength; */
1184 0x03, /* __u8 bDescriptorType; String-descriptor */
1185 'O', /* __u8 Unicode */
1186 0, /* __u8 Unicode */
1187 'H', /* __u8 Unicode */
1188 0, /* __u8 Unicode */
1189 'C', /* __u8 Unicode */
1190 0, /* __u8 Unicode */
1191 'I', /* __u8 Unicode */
1192 0, /* __u8 Unicode */
1193 ' ', /* __u8 Unicode */
1194 0, /* __u8 Unicode */
1195 'R', /* __u8 Unicode */
1196 0, /* __u8 Unicode */
1197 'o', /* __u8 Unicode */
1198 0, /* __u8 Unicode */
1199 'o', /* __u8 Unicode */
1200 0, /* __u8 Unicode */
1201 't', /* __u8 Unicode */
1202 0, /* __u8 Unicode */
1203 ' ', /* __u8 Unicode */
1204 0, /* __u8 Unicode */
1205 'H', /* __u8 Unicode */
1206 0, /* __u8 Unicode */
1207 'u', /* __u8 Unicode */
1208 0, /* __u8 Unicode */
1209 'b', /* __u8 Unicode */
1210 0, /* __u8 Unicode */
1213 /* Hub class-specific descriptor is constructed dynamically */
1215 /*-------------------------------------------------------------------------*/
1217 #define OK(x) len = (x); break
1219 #define WR_RH_STAT(x) {info("WR:status %#8x", (x)); ohci_writel((x), \
1220 &gohci.regs->roothub.status); }
1221 #define WR_RH_PORTSTAT(x) {info("WR:portstatus[%d] %#8x", wIndex-1, \
1222 (x)); ohci_writel((x), &gohci.regs->roothub.portstatus[wIndex-1]); }
1224 #define WR_RH_STAT(x) ohci_writel((x), &gohci.regs->roothub.status)
1225 #define WR_RH_PORTSTAT(x) ohci_writel((x), \
1226 &gohci.regs->roothub.portstatus[wIndex-1])
1228 #define RD_RH_STAT roothub_status(&gohci)
1229 #define RD_RH_PORTSTAT roothub_portstatus(&gohci, wIndex-1)
1231 /* request to virtual root hub */
1233 int rh_check_port_status(ohci_t *controller)
1239 temp = roothub_a(controller);
1240 ndp = (temp & RH_A_NDP);
1241 #ifdef CONFIG_AT91C_PQFP_UHPBUG
1242 ndp = (ndp == 2) ? 1:0;
1244 for (i = 0; i < ndp; i++) {
1245 temp = roothub_portstatus(controller, i);
1246 /* check for a device disconnect */
1247 if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
1248 (RH_PS_PESC | RH_PS_CSC)) &&
1249 ((temp & RH_PS_CCS) == 0)) {
1257 static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
1258 void *buffer, int transfer_len, struct devrequest *cmd)
1260 void *data = buffer;
1261 int leni = transfer_len;
1276 databuf.u32 = (__u32 *)datab;
1279 pkt_print(NULL, dev, pipe, buffer, transfer_len,
1280 cmd, "SUB(rh)", usb_pipein(pipe));
1284 if (usb_pipeint(pipe)) {
1285 info("Root-Hub submit IRQ: NOT implemented");
1289 bmRType_bReq = cmd->requesttype | (cmd->request << 8);
1290 wValue = le16_to_cpu(cmd->value);
1291 wIndex = le16_to_cpu(cmd->index);
1292 wLength = le16_to_cpu(cmd->length);
1294 info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
1295 dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
1297 switch (bmRType_bReq) {
1298 /* Request Destination:
1299 without flags: Device,
1300 RH_INTERFACE: interface,
1301 RH_ENDPOINT: endpoint,
1302 RH_CLASS means HUB here,
1303 RH_OTHER | RH_CLASS almost ever means HUB_PORT here
1307 databuf.u16[0] = cpu_to_le16(1);
1309 case RH_GET_STATUS | RH_INTERFACE:
1310 databuf.u16[0] = cpu_to_le16(0);
1312 case RH_GET_STATUS | RH_ENDPOINT:
1313 databuf.u16[0] = cpu_to_le16(0);
1315 case RH_GET_STATUS | RH_CLASS:
1316 databuf.u32[0] = cpu_to_le32(
1317 RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
1319 case RH_GET_STATUS | RH_OTHER | RH_CLASS:
1320 databuf.u32[0] = cpu_to_le32(RD_RH_PORTSTAT);
1323 case RH_CLEAR_FEATURE | RH_ENDPOINT:
1325 case (RH_ENDPOINT_STALL):
1330 case RH_CLEAR_FEATURE | RH_CLASS:
1332 case RH_C_HUB_LOCAL_POWER:
1334 case (RH_C_HUB_OVER_CURRENT):
1335 WR_RH_STAT(RH_HS_OCIC);
1340 case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
1342 case (RH_PORT_ENABLE): WR_RH_PORTSTAT(RH_PS_CCS); OK(0);
1343 case (RH_PORT_SUSPEND): WR_RH_PORTSTAT(RH_PS_POCI); OK(0);
1344 case (RH_PORT_POWER): WR_RH_PORTSTAT(RH_PS_LSDA); OK(0);
1345 case (RH_C_PORT_CONNECTION): WR_RH_PORTSTAT(RH_PS_CSC); OK(0);
1346 case (RH_C_PORT_ENABLE): WR_RH_PORTSTAT(RH_PS_PESC); OK(0);
1347 case (RH_C_PORT_SUSPEND): WR_RH_PORTSTAT(RH_PS_PSSC); OK(0);
1348 case (RH_C_PORT_OVER_CURRENT):WR_RH_PORTSTAT(RH_PS_OCIC); OK(0);
1349 case (RH_C_PORT_RESET): WR_RH_PORTSTAT(RH_PS_PRSC); OK(0);
1353 case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
1355 case (RH_PORT_SUSPEND):
1356 WR_RH_PORTSTAT(RH_PS_PSS); OK(0);
1357 case (RH_PORT_RESET): /* BUG IN HUP CODE *********/
1358 if (RD_RH_PORTSTAT & RH_PS_CCS)
1359 WR_RH_PORTSTAT(RH_PS_PRS);
1361 case (RH_PORT_POWER):
1362 WR_RH_PORTSTAT(RH_PS_PPS);
1365 case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/
1366 if (RD_RH_PORTSTAT & RH_PS_CCS)
1367 WR_RH_PORTSTAT(RH_PS_PES);
1372 case RH_SET_ADDRESS:
1373 gohci.rh.devnum = wValue;
1376 case RH_GET_DESCRIPTOR:
1377 switch ((wValue & 0xff00) >> 8) {
1378 case (0x01): /* device descriptor */
1379 len = min_t(unsigned int,
1382 sizeof(root_hub_dev_des),
1384 databuf.ptr = root_hub_dev_des; OK(len);
1385 case (0x02): /* configuration descriptor */
1386 len = min_t(unsigned int,
1389 sizeof(root_hub_config_des),
1391 databuf.ptr = root_hub_config_des; OK(len);
1392 case (0x03): /* string descriptors */
1393 if (wValue == 0x0300) {
1394 len = min_t(unsigned int,
1397 sizeof(root_hub_str_index0),
1399 databuf.ptr = root_hub_str_index0;
1402 if (wValue == 0x0301) {
1403 len = min_t(unsigned int,
1406 sizeof(root_hub_str_index1),
1408 databuf.ptr = root_hub_str_index1;
1412 stat = USB_ST_STALLED;
1416 case RH_GET_DESCRIPTOR | RH_CLASS:
1418 __u32 temp = roothub_a(&gohci);
1420 databuf.u8[0] = 9; /* min length; */
1421 databuf.u8[1] = 0x29;
1422 databuf.u8[2] = temp & RH_A_NDP;
1423 #ifdef CONFIG_AT91C_PQFP_UHPBUG
1424 databuf.u8[2] = (databuf.u8[2] == 2) ? 1 : 0;
1427 if (temp & RH_A_PSM) /* per-port power switching? */
1428 databuf.u8[3] |= 0x1;
1429 if (temp & RH_A_NOCP) /* no overcurrent reporting? */
1430 databuf.u8[3] |= 0x10;
1431 else if (temp & RH_A_OCPM)/* per-port overcurrent reporting? */
1432 databuf.u8[3] |= 0x8;
1434 /* corresponds to databuf.u8[4-7] */
1436 databuf.u8[5] = (temp & RH_A_POTPGT) >> 24;
1437 temp = roothub_b(&gohci);
1438 databuf.u8[7] = temp & RH_B_DR;
1439 if (databuf.u8[2] < 7) {
1440 databuf.u8[8] = 0xff;
1443 databuf.u8[8] = (temp & RH_B_DR) >> 8;
1444 databuf.u8[10] = databuf.u8[9] = 0xff;
1447 len = min_t(unsigned int, leni,
1448 min_t(unsigned int, databuf.u8[0], wLength));
1452 case RH_GET_CONFIGURATION:
1453 databuf.u8[0] = 0x01;
1456 case RH_SET_CONFIGURATION:
1457 WR_RH_STAT(0x10000);
1461 dbg("unsupported root hub command");
1462 stat = USB_ST_STALLED;
1466 ohci_dump_roothub(&gohci, 1);
1471 len = min_t(int, len, leni);
1472 if (data != databuf.ptr)
1473 memcpy(data, databuf.ptr, len);
1478 pkt_print(NULL, dev, pipe, buffer,
1479 transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/);
1487 /*-------------------------------------------------------------------------*/
1489 /* common code for handling submit messages - used for all but root hub */
1491 int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
1492 int transfer_len, struct devrequest *setup, int interval)
1495 int maxsize = usb_maxpacket(dev, pipe);
1499 urb = malloc(sizeof(urb_priv_t));
1500 memset(urb, 0, sizeof(urb_priv_t));
1504 urb->transfer_buffer = buffer;
1505 urb->transfer_buffer_length = transfer_len;
1506 urb->interval = interval;
1508 /* device pulled? Shortcut the action. */
1509 if (devgone == dev) {
1510 dev->status = USB_ST_CRC_ERR;
1515 urb->actual_length = 0;
1516 pkt_print(urb, dev, pipe, buffer, transfer_len,
1517 setup, "SUB", usb_pipein(pipe));
1522 err("submit_common_message: pipesize for pipe %lx is zero",
1527 if (sohci_submit_job(urb, setup) < 0) {
1528 err("sohci_submit_job failed");
1534 /* ohci_dump_status(&gohci); */
1537 timeout = USB_TIMEOUT_MS(pipe);
1539 /* wait for it to complete */
1541 /* check whether the controller is done */
1542 stat = hc_interrupt();
1544 stat = USB_ST_CRC_ERR;
1548 /* NOTE: since we are not interrupt driven in U-Boot and always
1549 * handle only one URB at a time, we cannot assume the
1550 * transaction finished on the first successful return from
1551 * hc_interrupt().. unless the flag for current URB is set,
1552 * meaning that all TD's to/from device got actually
1553 * transferred and processed. If the current URB is not
1554 * finished we need to re-iterate this loop so as
1555 * hc_interrupt() gets called again as there needs to be some
1556 * more TD's to process still */
1557 if ((stat >= 0) && (stat != 0xff) && (urb->finished)) {
1558 /* 0xff is returned for an SF-interrupt */
1568 err("CTL:TIMEOUT ");
1569 dbg("submit_common_msg: TO status %x\n", stat);
1571 stat = USB_ST_CRC_ERR;
1577 dev->act_len = transfer_len;
1580 pkt_print(urb, dev, pipe, buffer, transfer_len,
1581 setup, "RET(ctlr)", usb_pipein(pipe));
1586 /* free TDs in urb_priv */
1587 if (!usb_pipeint(pipe))
1592 /* submit routines called from usb.c */
1593 int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
1596 info("submit_bulk_msg");
1597 return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0);
1600 int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
1601 int transfer_len, struct devrequest *setup)
1603 int maxsize = usb_maxpacket(dev, pipe);
1605 info("submit_control_msg");
1607 pkt_print(NULL, dev, pipe, buffer, transfer_len,
1608 setup, "SUB", usb_pipein(pipe));
1613 err("submit_control_message: pipesize for pipe %lx is zero",
1617 if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) {
1619 /* root hub - redirect */
1620 return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len,
1624 return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0);
1627 int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
1628 int transfer_len, int interval)
1630 info("submit_int_msg");
1631 return submit_common_msg(dev, pipe, buffer, transfer_len, NULL,
1635 /*-------------------------------------------------------------------------*
1637 *-------------------------------------------------------------------------*/
1639 /* reset the HC and BUS */
1641 static int hc_reset(ohci_t *ohci)
1643 #ifdef CONFIG_PCI_EHCI_DEVNO
1647 int smm_timeout = 50; /* 0,5 sec */
1649 dbg("%s\n", __FUNCTION__);
1651 #ifdef CONFIG_PCI_EHCI_DEVNO
1653 * Some multi-function controllers (e.g. ISP1562) allow root hub
1654 * resetting via EHCI registers only.
1656 pdev = pci_find_devices(ehci_pci_ids, CONFIG_PCI_EHCI_DEVNO);
1661 pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &base);
1662 base += EHCI_USBCMD_OFF;
1663 ohci_writel(ohci_readl(base) | EHCI_USBCMD_HCRESET, base);
1665 while (ohci_readl(base) & EHCI_USBCMD_HCRESET) {
1666 if (timeout-- <= 0) {
1667 printf("USB RootHub reset timed out!");
1673 printf("No EHCI func at %d index!\n", CONFIG_PCI_EHCI_DEVNO);
1675 if (ohci_readl(&ohci->regs->control) & OHCI_CTRL_IR) {
1676 /* SMM owns the HC, request ownership */
1677 ohci_writel(OHCI_OCR, &ohci->regs->cmdstatus);
1678 info("USB HC TakeOver from SMM");
1679 while (ohci_readl(&ohci->regs->control) & OHCI_CTRL_IR) {
1681 if (--smm_timeout == 0) {
1682 err("USB HC TakeOver failed!");
1688 /* Disable HC interrupts */
1689 ohci_writel(OHCI_INTR_MIE, &ohci->regs->intrdisable);
1691 dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;\n",
1693 ohci_readl(&ohci->regs->control));
1695 /* Reset USB (needed by some controllers) */
1696 ohci->hc_control = 0;
1697 ohci_writel(ohci->hc_control, &ohci->regs->control);
1699 /* HC Reset requires max 10 us delay */
1700 ohci_writel(OHCI_HCR, &ohci->regs->cmdstatus);
1701 while ((ohci_readl(&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
1702 if (--timeout == 0) {
1703 err("USB HC reset timed out!");
1711 /*-------------------------------------------------------------------------*/
1713 /* Start an OHCI controller, set the BUS operational
1715 * connect the virtual root hub */
1717 static int hc_start(ohci_t *ohci)
1720 unsigned int fminterval;
1724 /* Tell the controller where the control and bulk lists are
1725 * The lists are empty now. */
1727 ohci_writel(0, &ohci->regs->ed_controlhead);
1728 ohci_writel(0, &ohci->regs->ed_bulkhead);
1730 ohci_writel((__u32)ohci->hcca,
1731 &ohci->regs->hcca); /* reset clears this */
1733 fminterval = 0x2edf;
1734 ohci_writel((fminterval * 9) / 10, &ohci->regs->periodicstart);
1735 fminterval |= ((((fminterval - 210) * 6) / 7) << 16);
1736 ohci_writel(fminterval, &ohci->regs->fminterval);
1737 ohci_writel(0x628, &ohci->regs->lsthresh);
1739 /* start controller operations */
1740 ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER;
1742 ohci_writel(ohci->hc_control, &ohci->regs->control);
1744 /* disable all interrupts */
1745 mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD |
1746 OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC |
1747 OHCI_INTR_OC | OHCI_INTR_MIE);
1748 ohci_writel(mask, &ohci->regs->intrdisable);
1749 /* clear all interrupts */
1750 mask &= ~OHCI_INTR_MIE;
1751 ohci_writel(mask, &ohci->regs->intrstatus);
1752 /* Choose the interrupts we care about now - but w/o MIE */
1753 mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO;
1754 ohci_writel(mask, &ohci->regs->intrenable);
1757 /* required for AMD-756 and some Mac platforms */
1758 ohci_writel((roothub_a(ohci) | RH_A_NPS) & ~RH_A_PSM,
1759 &ohci->regs->roothub.a);
1760 ohci_writel(RH_HS_LPSC, &ohci->regs->roothub.status);
1761 #endif /* OHCI_USE_NPS */
1763 /* POTPGT delay is bits 24-31, in 2 ms units. */
1764 mdelay((roothub_a(ohci) >> 23) & 0x1fe);
1766 /* connect the virtual root hub */
1767 ohci->rh.devnum = 0;
1772 /*-------------------------------------------------------------------------*/
1774 /* an interrupt happens */
1776 static int hc_interrupt(void)
1778 ohci_t *ohci = &gohci;
1779 struct ohci_regs *regs = ohci->regs;
1783 if ((ohci->hcca->done_head != 0) &&
1784 !(m32_swap(ohci->hcca->done_head) & 0x01)) {
1785 ints = OHCI_INTR_WDH;
1787 ints = ohci_readl(®s->intrstatus);
1788 if (ints == ~(u32)0) {
1790 err("%s device removed!", ohci->slot_name);
1793 ints &= ohci_readl(®s->intrenable);
1795 dbg("hc_interrupt: returning..\n");
1801 /* dbg("Interrupt: %x frame: %x", ints,
1802 le16_to_cpu(ohci->hcca->frame_no)); */
1804 if (ints & OHCI_INTR_RHSC)
1807 if (ints & OHCI_INTR_UE) {
1809 err("OHCI Unrecoverable Error, controller usb-%s disabled",
1811 /* e.g. due to PCI Master/Target Abort */
1818 /* FIXME: be optimistic, hope that bug won't repeat often. */
1819 /* Make some non-interrupt context restart the controller. */
1820 /* Count and limit the retries though; either hardware or */
1821 /* software errors can go forever... */
1826 if (ints & OHCI_INTR_WDH) {
1828 ohci_writel(OHCI_INTR_WDH, ®s->intrdisable);
1829 (void)ohci_readl(®s->intrdisable); /* flush */
1830 stat = dl_done_list(&gohci);
1831 ohci_writel(OHCI_INTR_WDH, ®s->intrenable);
1832 (void)ohci_readl(®s->intrdisable); /* flush */
1835 if (ints & OHCI_INTR_SO) {
1836 dbg("USB Schedule overrun\n");
1837 ohci_writel(OHCI_INTR_SO, ®s->intrenable);
1841 /* FIXME: this assumes SOF (1/ms) interrupts don't get lost... */
1842 if (ints & OHCI_INTR_SF) {
1843 unsigned int frame = m16_swap(ohci->hcca->frame_no) & 1;
1845 ohci_writel(OHCI_INTR_SF, ®s->intrdisable);
1846 if (ohci->ed_rm_list[frame] != NULL)
1847 ohci_writel(OHCI_INTR_SF, ®s->intrenable);
1851 ohci_writel(ints, ®s->intrstatus);
1855 /*-------------------------------------------------------------------------*/
1857 /*-------------------------------------------------------------------------*/
1859 /* De-allocate all resources.. */
1861 static void hc_release_ohci(ohci_t *ohci)
1863 dbg("USB HC release ohci usb-%s", ohci->slot_name);
1865 if (!ohci->disabled)
1869 /*-------------------------------------------------------------------------*/
1872 * low level initalisation routine, called from usb.c
1874 static char ohci_inited = 0;
1876 int usb_lowlevel_init(void)
1878 #ifdef CONFIG_PCI_OHCI
1882 #ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
1883 /* cpu dependant init */
1888 #ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
1889 /* board dependant init */
1890 if (usb_board_init())
1893 memset(&gohci, 0, sizeof(ohci_t));
1895 /* align the storage */
1896 if ((__u32)&ghcca[0] & 0xff) {
1897 err("HCCA not aligned!!");
1901 info("aligned ghcca %p", phcca);
1902 memset(&ohci_dev, 0, sizeof(struct ohci_device));
1903 if ((__u32)&ohci_dev.ed[0] & 0x7) {
1904 err("EDs not aligned!!");
1907 memset(gtd, 0, sizeof(td_t) * (NUM_TD + 1));
1908 if ((__u32)gtd & 0x7) {
1909 err("TDs not aligned!!");
1914 memset(phcca, 0, sizeof(struct ohci_hcca));
1919 #ifdef CONFIG_PCI_OHCI
1920 pdev = pci_find_devices(ohci_pci_ids, CONFIG_PCI_OHCI_DEVNO);
1925 pci_read_config_word(pdev, PCI_VENDOR_ID, &vid);
1926 pci_read_config_word(pdev, PCI_DEVICE_ID, &did);
1927 printf("OHCI pci controller (%04x, %04x) found @(%d:%d:%d)\n",
1928 vid, did, (pdev >> 16) & 0xff,
1929 (pdev >> 11) & 0x1f, (pdev >> 8) & 0x7);
1930 pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &base);
1931 printf("OHCI regs address 0x%08x\n", base);
1932 gohci.regs = (struct ohci_regs *)base;
1936 gohci.regs = (struct ohci_regs *)CONFIG_SYS_USB_OHCI_REGS_BASE;
1940 gohci.slot_name = CONFIG_SYS_USB_OHCI_SLOT_NAME;
1942 if (hc_reset (&gohci) < 0) {
1943 hc_release_ohci (&gohci);
1944 err ("can't reset usb-%s", gohci.slot_name);
1945 #ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
1946 /* board dependant cleanup */
1947 usb_board_init_fail();
1950 #ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
1951 /* cpu dependant cleanup */
1952 usb_cpu_init_fail();
1957 if (hc_start(&gohci) < 0) {
1958 err("can't start usb-%s", gohci.slot_name);
1959 hc_release_ohci(&gohci);
1960 /* Initialization failed */
1961 #ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
1962 /* board dependant cleanup */
1966 #ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
1967 /* cpu dependant cleanup */
1974 ohci_dump(&gohci, 1);
1982 int usb_lowlevel_stop(void)
1984 /* this gets called really early - before the controller has */
1985 /* even been initialized! */
1988 /* TODO release any interrupts, etc. */
1989 /* call hc_release_ohci() here ? */
1992 #ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
1993 /* board dependant cleanup */
1994 if (usb_board_stop())
1998 #ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
1999 /* cpu dependant cleanup */
2003 /* This driver is no longer initialised. It needs a new low-level
2004 * init (board/cpu) before it can be used again. */