1 // SPDX-License-Identifier: GPL-2.0+
3 * Copyright (c) 2011 The Chromium OS Authors.
13 #include <asm/cache.h>
14 #include <dm/device-internal.h>
16 #include "usb_ether.h"
20 #define USB_BULK_RECV_TIMEOUT 500
22 int usb_ether_register(struct udevice *dev, struct ueth_data *ueth, int rxsize)
24 struct usb_device *udev = dev_get_parent_priv(dev);
25 struct usb_interface_descriptor *iface_desc;
26 bool ep_in_found = false, ep_out_found = false;
27 struct usb_interface *iface;
28 const int ifnum = 0; /* Always use interface 0 */
31 iface = &udev->config.if_desc[ifnum];
32 iface_desc = &udev->config.if_desc[ifnum].desc;
34 /* Initialize the ueth_data structure with some useful info */
36 ueth->subclass = iface_desc->bInterfaceSubClass;
37 ueth->protocol = iface_desc->bInterfaceProtocol;
40 * We are expecting a minimum of 3 endpoints - in, out (bulk), and int.
41 * We will ignore any others.
43 for (i = 0; i < iface_desc->bNumEndpoints; i++) {
44 int ep_addr = iface->ep_desc[i].bEndpointAddress;
46 /* is it an BULK endpoint? */
47 if ((iface->ep_desc[i].bmAttributes &
48 USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) {
49 if (ep_addr & USB_DIR_IN && !ep_in_found) {
50 ueth->ep_in = ep_addr &
51 USB_ENDPOINT_NUMBER_MASK;
53 } else if (!(ep_addr & USB_DIR_IN) && !ep_out_found) {
54 ueth->ep_out = ep_addr &
55 USB_ENDPOINT_NUMBER_MASK;
60 /* is it an interrupt endpoint? */
61 if ((iface->ep_desc[i].bmAttributes &
62 USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) {
63 ueth->ep_int = iface->ep_desc[i].bEndpointAddress &
64 USB_ENDPOINT_NUMBER_MASK;
65 ueth->irqinterval = iface->ep_desc[i].bInterval;
68 debug("Endpoints In %d Out %d Int %d\n", ueth->ep_in, ueth->ep_out,
71 /* Do some basic sanity checks, and bail if we find a problem */
72 if (!ueth->ep_in || !ueth->ep_out || !ueth->ep_int) {
73 debug("%s: %s: Cannot find endpoints\n", __func__, dev->name);
77 ueth->rxsize = rxsize;
78 ueth->rxbuf = memalign(ARCH_DMA_MINALIGN, rxsize);
82 ret = usb_set_interface(udev, iface_desc->bInterfaceNumber, ifnum);
84 debug("%s: %s: Cannot set interface: %d\n", __func__, dev->name,
88 ueth->pusb_dev = udev;
93 int usb_ether_deregister(struct ueth_data *ueth)
98 int usb_ether_receive(struct ueth_data *ueth, int rxsize)
103 if (rxsize > ueth->rxsize)
105 ret = usb_bulk_msg(ueth->pusb_dev,
106 usb_rcvbulkpipe(ueth->pusb_dev, ueth->ep_in),
107 ueth->rxbuf, rxsize, &actual_len,
108 USB_BULK_RECV_TIMEOUT);
109 debug("Rx: len = %u, actual = %u, err = %d\n", rxsize, actual_len, ret);
111 printf("Rx: failed to receive: %d\n", ret);
114 if (actual_len > rxsize) {
115 debug("Rx: received too many bytes %d\n", actual_len);
118 ueth->rxlen = actual_len;
121 return actual_len ? 0 : -EAGAIN;
124 void usb_ether_advance_rxbuf(struct ueth_data *ueth, int num_bytes)
126 ueth->rxptr += num_bytes;
127 if (num_bytes < 0 || ueth->rxptr >= ueth->rxlen)
131 int usb_ether_get_rx_bytes(struct ueth_data *ueth, uint8_t **ptrp)
136 *ptrp = &ueth->rxbuf[ueth->rxptr];
138 return ueth->rxlen - ueth->rxptr;
143 typedef void (*usb_eth_before_probe)(void);
144 typedef int (*usb_eth_probe)(struct usb_device *dev, unsigned int ifnum,
145 struct ueth_data *ss);
146 typedef int (*usb_eth_get_info)(struct usb_device *dev, struct ueth_data *ss,
147 struct eth_device *dev_desc);
149 struct usb_eth_prob_dev {
150 usb_eth_before_probe before_probe; /* optional */
152 usb_eth_get_info get_info;
155 /* driver functions go here, each bracketed by #ifdef CONFIG_USB_ETHER_xxx */
156 static const struct usb_eth_prob_dev prob_dev[] = {
157 #ifdef CONFIG_USB_ETHER_ASIX
159 .before_probe = asix_eth_before_probe,
160 .probe = asix_eth_probe,
161 .get_info = asix_eth_get_info,
164 #ifdef CONFIG_USB_ETHER_ASIX88179
166 .before_probe = ax88179_eth_before_probe,
167 .probe = ax88179_eth_probe,
168 .get_info = ax88179_eth_get_info,
171 #ifdef CONFIG_USB_ETHER_MCS7830
173 .before_probe = mcs7830_eth_before_probe,
174 .probe = mcs7830_eth_probe,
175 .get_info = mcs7830_eth_get_info,
178 #ifdef CONFIG_USB_ETHER_SMSC95XX
180 .before_probe = smsc95xx_eth_before_probe,
181 .probe = smsc95xx_eth_probe,
182 .get_info = smsc95xx_eth_get_info,
185 #ifdef CONFIG_USB_ETHER_RTL8152
187 .before_probe = r8152_eth_before_probe,
188 .probe = r8152_eth_probe,
189 .get_info = r8152_eth_get_info,
195 static int usb_max_eth_dev; /* number of highest available usb eth device */
196 static struct ueth_data usb_eth[USB_MAX_ETH_DEV];
198 /*******************************************************************************
199 * tell if current ethernet device is a usb dongle
201 int is_eth_dev_on_usb_host(void)
204 struct eth_device *dev = eth_get_dev();
207 for (i = 0; i < usb_max_eth_dev; i++)
208 if (&usb_eth[i].eth_dev == dev)
215 * Given a USB device, ask each driver if it can support it, and attach it
216 * to the first driver that says 'yes'
218 static void probe_valid_drivers(struct usb_device *dev)
220 struct eth_device *eth;
223 for (j = 0; prob_dev[j].probe && prob_dev[j].get_info; j++) {
224 if (!prob_dev[j].probe(dev, 0, &usb_eth[usb_max_eth_dev]))
227 * ok, it is a supported eth device. Get info and fill it in
229 eth = &usb_eth[usb_max_eth_dev].eth_dev;
230 if (prob_dev[j].get_info(dev,
231 &usb_eth[usb_max_eth_dev],
233 /* found proper driver */
234 /* register with networking stack */
238 * usb_max_eth_dev must be incremented prior to this
239 * call since eth_current_changed (internally called)
243 if (eth_write_hwaddr(eth, "usbeth",
244 usb_max_eth_dev - 1))
245 puts("Warning: failed to set MAC address\n");
251 /*******************************************************************************
252 * scan the usb and reports device info
253 * to the user if mode = 1
254 * returns current device or -1 if no
256 int usb_host_eth_scan(int mode)
261 printf(" scanning usb for ethernet devices... ");
263 old_async = usb_disable_asynch(1); /* asynch transfer not allowed */
265 /* unregister a previously detected device */
266 for (i = 0; i < usb_max_eth_dev; i++)
267 eth_unregister(&usb_eth[i].eth_dev);
269 memset(usb_eth, 0, sizeof(usb_eth));
271 for (i = 0; prob_dev[i].probe; i++) {
272 if (prob_dev[i].before_probe)
273 prob_dev[i].before_probe();
277 #if CONFIG_IS_ENABLED(DM_USB)
279 * TODO: We should add U_BOOT_USB_DEVICE() declarations to each USB
280 * Ethernet driver and then most of this file can be removed.
286 ret = uclass_get(UCLASS_USB, &uc);
289 uclass_foreach_dev(bus, uc) {
290 for (i = 0; i < USB_MAX_DEVICE; i++) {
291 struct usb_device *dev;
293 dev = usb_get_dev_index(bus, i); /* get device */
294 debug("i=%d, %s\n", i, dev ? dev->dev->name : "(done)");
296 break; /* no more devices available */
299 * find valid usb_ether driver for this device,
302 probe_valid_drivers(dev);
305 if (usb_max_eth_dev == USB_MAX_ETH_DEV)
310 for (i = 0; i < USB_MAX_DEVICE; i++) {
311 struct usb_device *dev;
313 dev = usb_get_dev_index(i); /* get device */
316 break; /* no more devices available */
318 /* find valid usb_ether driver for this device, if any */
319 probe_valid_drivers(dev);
322 if (usb_max_eth_dev == USB_MAX_ETH_DEV)
326 if (usb_max_eth_dev == USB_MAX_ETH_DEV) {
327 printf("max USB Ethernet Device reached: %d stopping\n",
330 usb_disable_asynch(old_async); /* restore asynch value */
331 printf("%d Ethernet Device(s) found\n", usb_max_eth_dev);
332 if (usb_max_eth_dev > 0)