drivers/usb/dwc3/gadget.c

   1 /**
   2  * gadget.c - DesignWare USB3 DRD Controller Gadget Framework Link
   3  *
   4  * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
   5  *
   6  * Authors: Felipe Balbi <balbi@ti.com>,
   7  *          Sebastian Andrzej Siewior <bigeasy@linutronix.de>
   8  *
   9  * Redistribution and use in source and binary forms, with or without
  10  * modification, are permitted provided that the following conditions
  11  * are met:
  12  * 1. Redistributions of source code must retain the above copyright
  13  *    notice, this list of conditions, and the following disclaimer,
  14  *    without modification.
  15  * 2. Redistributions in binary form must reproduce the above copyright
  16  *    notice, this list of conditions and the following disclaimer in the
  17  *    documentation and/or other materials provided with the distribution.
  18  * 3. The names of the above-listed copyright holders may not be used
  19  *    to endorse or promote products derived from this software without
  20  *    specific prior written permission.
  21  *
  22  * ALTERNATIVELY, this software may be distributed under the terms of the
  23  * GNU General Public License ("GPL") version 2, as published by the Free
  24  * Software Foundation.
  25  *
  26  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
  27  * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
  28  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  29  * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
  30  * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
  31  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
  32  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
  33  * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
  34  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  35  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  36  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  37  */
  38
  39 #include <linux/kernel.h>
  40 #include <linux/delay.h>
  41 #include <linux/slab.h>
  42 #include <linux/spinlock.h>
  43 #include <linux/platform_device.h>
  44 #include <linux/pm_runtime.h>
  45 #include <linux/interrupt.h>
  46 #include <linux/io.h>
  47 #include <linux/list.h>
  48 #include <linux/dma-mapping.h>
  49
  50 #include <linux/usb/ch9.h>
  51 #include <linux/usb/gadget.h>
  52
  53 #include "core.h"
  54 #include "gadget.h"
  55 #include "io.h"
  56
  57 /**
  58  * dwc3_gadget_set_test_mode - Enables USB2 Test Modes
  59  * @dwc: pointer to our context structure
  60  * @mode: the mode to set (J, K SE0 NAK, Force Enable)
  61  *
  62  * Caller should take care of locking. This function will
  63  * return 0 on success or -EINVAL if wrong Test Selector
  64  * is passed
  65  */
  66 int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode)
  67 {
  68         u32             reg;
  69
  70         reg = dwc3_readl(dwc->regs, DWC3_DCTL);
  71         reg &= ~DWC3_DCTL_TSTCTRL_MASK;
  72
  73         switch (mode) {
  74         case TEST_J:
  75         case TEST_K:
  76         case TEST_SE0_NAK:
  77         case TEST_PACKET:
  78         case TEST_FORCE_EN:
  79                 reg |= mode << 1;
  80                 break;
  81         default:
  82                 return -EINVAL;
  83         }
  84
  85         dwc3_writel(dwc->regs, DWC3_DCTL, reg);
  86
  87         return 0;
  88 }
  89
  90 /**
  91  * dwc3_gadget_set_link_state - Sets USB Link to a particular State
  92  * @dwc: pointer to our context structure
  93  * @state: the state to put link into
  94  *
  95  * Caller should take care of locking. This function will
  96  * return 0 on success or -ETIMEDOUT.
  97  */
  98 int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state)
  99 {
 100         int             retries = 10000;
 101         u32             reg;
 102
 103         /*
 104          * Wait until device controller is ready. Only applies to 1.94a and
 105          * later RTL.
 106          */
 107         if (dwc->revision >= DWC3_REVISION_194A) {
 108                 while (--retries) {
 109                         reg = dwc3_readl(dwc->regs, DWC3_DSTS);
 110                         if (reg & DWC3_DSTS_DCNRD)
 111                                 udelay(5);
 112                         else
 113                                 break;
 114                 }
 115
 116                 if (retries <= 0)
 117                         return -ETIMEDOUT;
 118         }
 119
 120         reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 121         reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK;
 122
 123         /* set requested state */
 124         reg |= DWC3_DCTL_ULSTCHNGREQ(state);
 125         dwc3_writel(dwc->regs, DWC3_DCTL, reg);
 126
 127         /*
 128          * The following code is racy when called from dwc3_gadget_wakeup,
 129          * and is not needed, at least on newer versions
 130          */
 131         if (dwc->revision >= DWC3_REVISION_194A)
 132                 return 0;
 133
 134         /* wait for a change in DSTS */
 135         retries = 10000;
 136         while (--retries) {
 137                 reg = dwc3_readl(dwc->regs, DWC3_DSTS);
 138
 139                 if (DWC3_DSTS_USBLNKST(reg) == state)
 140                         return 0;
 141
 142                 udelay(5);
 143         }
 144
 145         dev_vdbg(dwc->dev, "link state change request timed out\n");
 146
 147         return -ETIMEDOUT;
 148 }
 149
 150 /**
 151  * dwc3_gadget_resize_tx_fifos - reallocate fifo spaces for current use-case
 152  * @dwc: pointer to our context structure
 153  *
 154  * This function will a best effort FIFO allocation in order
 155  * to improve FIFO usage and throughput, while still allowing
 156  * us to enable as many endpoints as possible.
 157  *
 158  * Keep in mind that this operation will be highly dependent
 159  * on the configured size for RAM1 - which contains TxFifo -,
 160  * the amount of endpoints enabled on coreConsultant tool, and
 161  * the width of the Master Bus.
 162  *
 163  * In the ideal world, we would always be able to satisfy the
 164  * following equation:
 165  *
 166  * ((512 + 2 * MDWIDTH-Bytes) + (Number of IN Endpoints - 1) * \
 167  * (3 * (1024 + MDWIDTH-Bytes) + MDWIDTH-Bytes)) / MDWIDTH-Bytes
 168  *
 169  * Unfortunately, due to many variables that's not always the case.
 170  */
 171 int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc)
 172 {
 173         int             last_fifo_depth = 0;
 174         int             ram1_depth;
 175         int             fifo_size;
 176         int             mdwidth;
 177         int             num;
 178
 179         if (!dwc->needs_fifo_resize)
 180                 return 0;
 181
 182         ram1_depth = DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7);
 183         mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0);
 184
 185         /* MDWIDTH is represented in bits, we need it in bytes */
 186         mdwidth >>= 3;
 187
 188         /*
 189          * FIXME For now we will only allocate 1 wMaxPacketSize space
 190          * for each enabled endpoint, later patches will come to
 191          * improve this algorithm so that we better use the internal
 192          * FIFO space
 193          */
 194         for (num = 0; num < DWC3_ENDPOINTS_NUM; num++) {
 195                 struct dwc3_ep  *dep = dwc->eps[num];
 196                 int             fifo_number = dep->number >> 1;
 197                 int             mult = 1;
 198                 int             tmp;
 199
 200                 if (!(dep->number & 1))
 201                         continue;
 202
 203                 if (!(dep->flags & DWC3_EP_ENABLED))
 204                         continue;
 205
 206                 if (usb_endpoint_xfer_bulk(dep->endpoint.desc)
 207                                 || usb_endpoint_xfer_isoc(dep->endpoint.desc))
 208                         mult = 3;
 209
 210                 /*
 211                  * REVISIT: the following assumes we will always have enough
 212                  * space available on the FIFO RAM for all possible use cases.
 213                  * Make sure that's true somehow and change FIFO allocation
 214                  * accordingly.
 215                  *
 216                  * If we have Bulk or Isochronous endpoints, we want
 217                  * them to be able to be very, very fast. So we're giving
 218                  * those endpoints a fifo_size which is enough for 3 full
 219                  * packets
 220                  */
 221                 tmp = mult * (dep->endpoint.maxpacket + mdwidth);
 222                 tmp += mdwidth;
 223
 224                 fifo_size = DIV_ROUND_UP(tmp, mdwidth);
 225
 226                 fifo_size |= (last_fifo_depth << 16);
 227
 228                 dev_vdbg(dwc->dev, "%s: Fifo Addr %04x Size %d\n",
 229                                 dep->name, last_fifo_depth, fifo_size & 0xffff);
 230
 231                 dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(fifo_number),
 232                                 fifo_size);
 233
 234                 last_fifo_depth += (fifo_size & 0xffff);
 235         }
 236
 237         return 0;
 238 }
 239
 240 void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
 241                 int status)
 242 {
 243         struct dwc3                     *dwc = dep->dwc;
 244         int                             i;
 245
 246         if (req->queued) {
 247                 i = 0;
 248                 do {
 249                         dep->busy_slot++;
 250                         /*
 251                          * Skip LINK TRB. We can't use req->trb and check for
 252                          * DWC3_TRBCTL_LINK_TRB because it points the TRB we
 253                          * just completed (not the LINK TRB).
 254                          */
 255                         if (((dep->busy_slot & DWC3_TRB_MASK) ==
 256                                 DWC3_TRB_NUM- 1) &&
 257                                 usb_endpoint_xfer_isoc(dep->endpoint.desc))
 258                                 dep->busy_slot++;
 259                 } while(++i < req->request.num_mapped_sgs);
 260                 req->queued = false;
 261         }
 262         list_del(&req->list);
 263         req->trb = NULL;
 264
 265         if (req->request.status == -EINPROGRESS)
 266                 req->request.status = status;
 267
 268         if (dwc->ep0_bounced && dep->number == 0)
 269                 dwc->ep0_bounced = false;
 270         else
 271                 usb_gadget_unmap_request(&dwc->gadget, &req->request,
 272                                 req->direction);
 273
 274         dev_dbg(dwc->dev, "request %p from %s completed %d/%d ===> %d\n",
 275                         req, dep->name, req->request.actual,
 276                         req->request.length, status);
 277
 278         spin_unlock(&dwc->lock);
 279         req->request.complete(&dep->endpoint, &req->request);
 280         spin_lock(&dwc->lock);
 281 }
 282
 283 static const char *dwc3_gadget_ep_cmd_string(u8 cmd)
 284 {
 285         switch (cmd) {
 286         case DWC3_DEPCMD_DEPSTARTCFG:
 287                 return "Start New Configuration";
 288         case DWC3_DEPCMD_ENDTRANSFER:
 289                 return "End Transfer";
 290         case DWC3_DEPCMD_UPDATETRANSFER:
 291                 return "Update Transfer";
 292         case DWC3_DEPCMD_STARTTRANSFER:
 293                 return "Start Transfer";
 294         case DWC3_DEPCMD_CLEARSTALL:
 295                 return "Clear Stall";
 296         case DWC3_DEPCMD_SETSTALL:
 297                 return "Set Stall";
 298         case DWC3_DEPCMD_GETEPSTATE:
 299                 return "Get Endpoint State";
 300         case DWC3_DEPCMD_SETTRANSFRESOURCE:
 301                 return "Set Endpoint Transfer Resource";
 302         case DWC3_DEPCMD_SETEPCONFIG:
 303                 return "Set Endpoint Configuration";
 304         default:
 305                 return "UNKNOWN command";
 306         }
 307 }
 308
 309 int dwc3_send_gadget_generic_command(struct dwc3 *dwc, int cmd, u32 param)
 310 {
 311         u32             timeout = 500;
 312         u32             reg;
 313
 314         dwc3_writel(dwc->regs, DWC3_DGCMDPAR, param);
 315         dwc3_writel(dwc->regs, DWC3_DGCMD, cmd | DWC3_DGCMD_CMDACT);
 316
 317         do {
 318                 reg = dwc3_readl(dwc->regs, DWC3_DGCMD);
 319                 if (!(reg & DWC3_DGCMD_CMDACT)) {
 320                         dev_vdbg(dwc->dev, "Command Complete --> %d\n",
 321                                         DWC3_DGCMD_STATUS(reg));
 322                         return 0;
 323                 }
 324
 325                 /*
 326                  * We can't sleep here, because it's also called from
 327                  * interrupt context.
 328                  */
 329                 timeout--;
 330                 if (!timeout)
 331                         return -ETIMEDOUT;
 332                 udelay(1);
 333         } while (1);
 334 }
 335
 336 int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
 337                 unsigned cmd, struct dwc3_gadget_ep_cmd_params *params)
 338 {
 339         struct dwc3_ep          *dep = dwc->eps[ep];
 340         u32                     timeout = 500;
 341         u32                     reg;
 342
 343         dev_vdbg(dwc->dev, "%s: cmd '%s' params %08x %08x %08x\n",
 344                         dep->name,
 345                         dwc3_gadget_ep_cmd_string(cmd), params->param0,
 346                         params->param1, params->param2);
 347
 348         dwc3_writel(dwc->regs, DWC3_DEPCMDPAR0(ep), params->param0);
 349         dwc3_writel(dwc->regs, DWC3_DEPCMDPAR1(ep), params->param1);
 350         dwc3_writel(dwc->regs, DWC3_DEPCMDPAR2(ep), params->param2);
 351
 352         dwc3_writel(dwc->regs, DWC3_DEPCMD(ep), cmd | DWC3_DEPCMD_CMDACT);
 353         do {
 354                 reg = dwc3_readl(dwc->regs, DWC3_DEPCMD(ep));
 355                 if (!(reg & DWC3_DEPCMD_CMDACT)) {
 356                         dev_vdbg(dwc->dev, "Command Complete --> %d\n",
 357                                         DWC3_DEPCMD_STATUS(reg));
 358                         return 0;
 359                 }
 360
 361                 /*
 362                  * We can't sleep here, because it is also called from
 363                  * interrupt context.
 364                  */
 365                 timeout--;
 366                 if (!timeout)
 367                         return -ETIMEDOUT;
 368
 369                 udelay(1);
 370         } while (1);
 371 }
 372
 373 static dma_addr_t dwc3_trb_dma_offset(struct dwc3_ep *dep,
 374                 struct dwc3_trb *trb)
 375 {
 376         u32             offset = (char *) trb - (char *) dep->trb_pool;
 377
 378         return dep->trb_pool_dma + offset;
 379 }
 380
 381 static int dwc3_alloc_trb_pool(struct dwc3_ep *dep)
 382 {
 383         struct dwc3             *dwc = dep->dwc;
 384
 385         if (dep->trb_pool)
 386                 return 0;
 387
 388         if (dep->number == 0 || dep->number == 1)
 389                 return 0;
 390
 391         dep->trb_pool = dma_alloc_coherent(dwc->dev,
 392                         sizeof(struct dwc3_trb) * DWC3_TRB_NUM,
 393                         &dep->trb_pool_dma, GFP_KERNEL);
 394         if (!dep->trb_pool) {
 395                 dev_err(dep->dwc->dev, "failed to allocate trb pool for %s\n",
 396                                 dep->name);
 397                 return -ENOMEM;
 398         }
 399
 400         return 0;
 401 }
 402
 403 static void dwc3_free_trb_pool(struct dwc3_ep *dep)
 404 {
 405         struct dwc3             *dwc = dep->dwc;
 406
 407         dma_free_coherent(dwc->dev, sizeof(struct dwc3_trb) * DWC3_TRB_NUM,
 408                         dep->trb_pool, dep->trb_pool_dma);
 409
 410         dep->trb_pool = NULL;
 411         dep->trb_pool_dma = 0;
 412 }
 413
 414 static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep)
 415 {
 416         struct dwc3_gadget_ep_cmd_params params;
 417         u32                     cmd;
 418
 419         memset(&params, 0x00, sizeof(params));
 420
 421         if (dep->number != 1) {
 422                 cmd = DWC3_DEPCMD_DEPSTARTCFG;
 423                 /* XferRscIdx == 0 for ep0 and 2 for the remaining */
 424                 if (dep->number > 1) {
 425                         if (dwc->start_config_issued)
 426                                 return 0;
 427                         dwc->start_config_issued = true;
 428                         cmd |= DWC3_DEPCMD_PARAM(2);
 429                 }
 430
 431                 return dwc3_send_gadget_ep_cmd(dwc, 0, cmd, &params);
 432         }
 433
 434         return 0;
 435 }
 436
 437 static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
 438                 const struct usb_endpoint_descriptor *desc,
 439                 const struct usb_ss_ep_comp_descriptor *comp_desc,
 440                 bool ignore)
 441 {
 442         struct dwc3_gadget_ep_cmd_params params;
 443
 444         memset(&params, 0x00, sizeof(params));
 445
 446         params.param0 = DWC3_DEPCFG_EP_TYPE(usb_endpoint_type(desc))
 447                 | DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc));
 448
 449         /* Burst size is only needed in SuperSpeed mode */
 450         if (dwc->gadget.speed == USB_SPEED_SUPER) {
 451                 u32 burst = dep->endpoint.maxburst - 1;
 452
 453                 params.param0 |= DWC3_DEPCFG_BURST_SIZE(burst);
 454         }
 455
 456         if (ignore)
 457                 params.param0 |= DWC3_DEPCFG_IGN_SEQ_NUM;
 458
 459         params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN
 460                 | DWC3_DEPCFG_XFER_NOT_READY_EN;
 461
 462         if (usb_ss_max_streams(comp_desc) && usb_endpoint_xfer_bulk(desc)) {
 463                 params.param1 |= DWC3_DEPCFG_STREAM_CAPABLE
 464                         | DWC3_DEPCFG_STREAM_EVENT_EN;
 465                 dep->stream_capable = true;
 466         }
 467
 468         if (usb_endpoint_xfer_isoc(desc))
 469                 params.param1 |= DWC3_DEPCFG_XFER_IN_PROGRESS_EN;
 470
 471         /*
 472          * We are doing 1:1 mapping for endpoints, meaning
 473          * Physical Endpoints 2 maps to Logical Endpoint 2 and
 474          * so on. We consider the direction bit as part of the physical
 475          * endpoint number. So USB endpoint 0x81 is 0x03.
 476          */
 477         params.param1 |= DWC3_DEPCFG_EP_NUMBER(dep->number);
 478
 479         /*
 480          * We must use the lower 16 TX FIFOs even though
 481          * HW might have more
 482          */
 483         if (dep->direction)
 484                 params.param0 |= DWC3_DEPCFG_FIFO_NUMBER(dep->number >> 1);
 485
 486         if (desc->bInterval) {
 487                 params.param1 |= DWC3_DEPCFG_BINTERVAL_M1(desc->bInterval - 1);
 488                 dep->interval = 1 << (desc->bInterval - 1);
 489         }
 490
 491         return dwc3_send_gadget_ep_cmd(dwc, dep->number,
 492                         DWC3_DEPCMD_SETEPCONFIG, &params);
 493 }
 494
 495 static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep)
 496 {
 497         struct dwc3_gadget_ep_cmd_params params;
 498
 499         memset(&params, 0x00, sizeof(params));
 500
 501         params.param0 = DWC3_DEPXFERCFG_NUM_XFER_RES(1);
 502
 503         return dwc3_send_gadget_ep_cmd(dwc, dep->number,
 504                         DWC3_DEPCMD_SETTRANSFRESOURCE, &params);
 505 }
 506
 507 /**
 508  * __dwc3_gadget_ep_enable - Initializes a HW endpoint
 509  * @dep: endpoint to be initialized
 510  * @desc: USB Endpoint Descriptor
 511  *
 512  * Caller should take care of locking
 513  */
 514 static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
 515                 const struct usb_endpoint_descriptor *desc,
 516                 const struct usb_ss_ep_comp_descriptor *comp_desc,
 517                 bool ignore)
 518 {
 519         struct dwc3             *dwc = dep->dwc;
 520         u32                     reg;
 521         int                     ret = -ENOMEM;
 522
 523         if (!(dep->flags & DWC3_EP_ENABLED)) {
 524                 ret = dwc3_gadget_start_config(dwc, dep);
 525                 if (ret)
 526                         return ret;
 527         }
 528
 529         ret = dwc3_gadget_set_ep_config(dwc, dep, desc, comp_desc, ignore);
 530         if (ret)
 531                 return ret;
 532
 533         if (!(dep->flags & DWC3_EP_ENABLED)) {
 534                 struct dwc3_trb *trb_st_hw;
 535                 struct dwc3_trb *trb_link;
 536
 537                 ret = dwc3_gadget_set_xfer_resource(dwc, dep);
 538                 if (ret)
 539                         return ret;
 540
 541                 dep->endpoint.desc = desc;
 542                 dep->comp_desc = comp_desc;
 543                 dep->type = usb_endpoint_type(desc);
 544                 dep->flags |= DWC3_EP_ENABLED;
 545
 546                 reg = dwc3_readl(dwc->regs, DWC3_DALEPENA);
 547                 reg |= DWC3_DALEPENA_EP(dep->number);
 548                 dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
 549
 550                 if (!usb_endpoint_xfer_isoc(desc))
 551                         return 0;
 552
 553                 memset(&trb_link, 0, sizeof(trb_link));
 554
 555                 /* Link TRB for ISOC. The HWO bit is never reset */
 556                 trb_st_hw = &dep->trb_pool[0];
 557
 558                 trb_link = &dep->trb_pool[DWC3_TRB_NUM - 1];
 559
 560                 trb_link->bpl = lower_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
 561                 trb_link->bph = upper_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
 562                 trb_link->ctrl |= DWC3_TRBCTL_LINK_TRB;
 563                 trb_link->ctrl |= DWC3_TRB_CTRL_HWO;
 564         }
 565
 566         return 0;
 567 }
 568
 569 static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum);
 570 static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep)
 571 {
 572         struct dwc3_request             *req;
 573
 574         if (!list_empty(&dep->req_queued)) {
 575                 dwc3_stop_active_transfer(dwc, dep->number);
 576
 577                 /* - giveback all requests to gadget driver */
 578                 while (!list_empty(&dep->req_queued)) {
 579                         req = next_request(&dep->req_queued);
 580
 581                         dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
 582                 }
 583         }
 584
 585         while (!list_empty(&dep->request_list)) {
 586                 req = next_request(&dep->request_list);
 587
 588                 dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
 589         }
 590 }
 591
 592 /**
 593  * __dwc3_gadget_ep_disable - Disables a HW endpoint
 594  * @dep: the endpoint to disable
 595  *
 596  * This function also removes requests which are currently processed ny the
 597  * hardware and those which are not yet scheduled.
 598  * Caller should take care of locking.
 599  */
 600 static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
 601 {
 602         struct dwc3             *dwc = dep->dwc;
 603         u32                     reg;
 604
 605         dwc3_remove_requests(dwc, dep);
 606
 607         reg = dwc3_readl(dwc->regs, DWC3_DALEPENA);
 608         reg &= ~DWC3_DALEPENA_EP(dep->number);
 609         dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
 610
 611         dep->stream_capable = false;
 612         dep->endpoint.desc = NULL;
 613         dep->comp_desc = NULL;
 614         dep->type = 0;
 615         dep->flags = 0;
 616
 617         return 0;
 618 }
 619
 620 /* -------------------------------------------------------------------------- */
 621
 622 static int dwc3_gadget_ep0_enable(struct usb_ep *ep,
 623                 const struct usb_endpoint_descriptor *desc)
 624 {
 625         return -EINVAL;
 626 }
 627
 628 static int dwc3_gadget_ep0_disable(struct usb_ep *ep)
 629 {
 630         return -EINVAL;
 631 }
 632
 633 /* -------------------------------------------------------------------------- */
 634
 635 static int dwc3_gadget_ep_enable(struct usb_ep *ep,
 636                 const struct usb_endpoint_descriptor *desc)
 637 {
 638         struct dwc3_ep                  *dep;
 639         struct dwc3                     *dwc;
 640         unsigned long                   flags;
 641         int                             ret;
 642
 643         if (!ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) {
 644                 pr_debug("dwc3: invalid parameters\n");
 645                 return -EINVAL;
 646         }
 647
 648         if (!desc->wMaxPacketSize) {
 649                 pr_debug("dwc3: missing wMaxPacketSize\n");
 650                 return -EINVAL;
 651         }
 652
 653         dep = to_dwc3_ep(ep);
 654         dwc = dep->dwc;
 655
 656         if (dep->flags & DWC3_EP_ENABLED) {
 657                 dev_WARN_ONCE(dwc->dev, true, "%s is already enabled\n",
 658                                 dep->name);
 659                 return 0;
 660         }
 661
 662         switch (usb_endpoint_type(desc)) {
 663         case USB_ENDPOINT_XFER_CONTROL:
 664                 strlcat(dep->name, "-control", sizeof(dep->name));
 665                 break;
 666         case USB_ENDPOINT_XFER_ISOC:
 667                 strlcat(dep->name, "-isoc", sizeof(dep->name));
 668                 break;
 669         case USB_ENDPOINT_XFER_BULK:
 670                 strlcat(dep->name, "-bulk", sizeof(dep->name));
 671                 break;
 672         case USB_ENDPOINT_XFER_INT:
 673                 strlcat(dep->name, "-int", sizeof(dep->name));
 674                 break;
 675         default:
 676                 dev_err(dwc->dev, "invalid endpoint transfer type\n");
 677         }
 678
 679         dev_vdbg(dwc->dev, "Enabling %s\n", dep->name);
 680
 681         spin_lock_irqsave(&dwc->lock, flags);
 682         ret = __dwc3_gadget_ep_enable(dep, desc, ep->comp_desc, false);
 683         spin_unlock_irqrestore(&dwc->lock, flags);
 684
 685         return ret;
 686 }
 687
 688 static int dwc3_gadget_ep_disable(struct usb_ep *ep)
 689 {
 690         struct dwc3_ep                  *dep;
 691         struct dwc3                     *dwc;
 692         unsigned long                   flags;
 693         int                             ret;
 694
 695         if (!ep) {
 696                 pr_debug("dwc3: invalid parameters\n");
 697                 return -EINVAL;
 698         }
 699
 700         dep = to_dwc3_ep(ep);
 701         dwc = dep->dwc;
 702
 703         if (!(dep->flags & DWC3_EP_ENABLED)) {
 704                 dev_WARN_ONCE(dwc->dev, true, "%s is already disabled\n",
 705                                 dep->name);
 706                 return 0;
 707         }
 708
 709         snprintf(dep->name, sizeof(dep->name), "ep%d%s",
 710                         dep->number >> 1,
 711                         (dep->number & 1) ? "in" : "out");
 712
 713         spin_lock_irqsave(&dwc->lock, flags);
 714         ret = __dwc3_gadget_ep_disable(dep);
 715         spin_unlock_irqrestore(&dwc->lock, flags);
 716
 717         return ret;
 718 }
 719
 720 static struct usb_request *dwc3_gadget_ep_alloc_request(struct usb_ep *ep,
 721         gfp_t gfp_flags)
 722 {
 723         struct dwc3_request             *req;
 724         struct dwc3_ep                  *dep = to_dwc3_ep(ep);
 725         struct dwc3                     *dwc = dep->dwc;
 726
 727         req = kzalloc(sizeof(*req), gfp_flags);
 728         if (!req) {
 729                 dev_err(dwc->dev, "not enough memory\n");
 730                 return NULL;
 731         }
 732
 733         req->epnum      = dep->number;
 734         req->dep        = dep;
 735
 736         return &req->request;
 737 }
 738
 739 static void dwc3_gadget_ep_free_request(struct usb_ep *ep,
 740                 struct usb_request *request)
 741 {
 742         struct dwc3_request             *req = to_dwc3_request(request);
 743
 744         kfree(req);
 745 }
 746
 747 /**
 748  * dwc3_prepare_one_trb - setup one TRB from one request
 749  * @dep: endpoint for which this request is prepared
 750  * @req: dwc3_request pointer
 751  */
 752 static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
 753                 struct dwc3_request *req, dma_addr_t dma,
 754                 unsigned length, unsigned last, unsigned chain, unsigned node)
 755 {
 756         struct dwc3             *dwc = dep->dwc;
 757         struct dwc3_trb         *trb;
 758
 759         dev_vdbg(dwc->dev, "%s: req %p dma %08llx length %d%s%s\n",
 760                         dep->name, req, (unsigned long long) dma,
 761                         length, last ? " last" : "",
 762                         chain ? " chain" : "");
 763
 764         /* Skip the LINK-TRB on ISOC */
 765         if (((dep->free_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) &&
 766                         usb_endpoint_xfer_isoc(dep->endpoint.desc))
 767                 dep->free_slot++;
 768
 769         trb = &dep->trb_pool[dep->free_slot & DWC3_TRB_MASK];
 770
 771         if (!req->trb) {
 772                 dwc3_gadget_move_request_queued(req);
 773                 req->trb = trb;
 774                 req->trb_dma = dwc3_trb_dma_offset(dep, trb);
 775                 req->start_slot = dep->free_slot & DWC3_TRB_MASK;
 776         }
 777
 778         dep->free_slot++;
 779
 780         trb->size = DWC3_TRB_SIZE_LENGTH(length);
 781         trb->bpl = lower_32_bits(dma);
 782         trb->bph = upper_32_bits(dma);
 783
 784         switch (usb_endpoint_type(dep->endpoint.desc)) {
 785         case USB_ENDPOINT_XFER_CONTROL:
 786                 trb->ctrl = DWC3_TRBCTL_CONTROL_SETUP;
 787                 break;
 788
 789         case USB_ENDPOINT_XFER_ISOC:
 790                 if (!node)
 791                         trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS_FIRST;
 792                 else
 793                         trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS;
 794
 795                 if (!req->request.no_interrupt && !chain)
 796                         trb->ctrl |= DWC3_TRB_CTRL_IOC;
 797                 break;
 798
 799         case USB_ENDPOINT_XFER_BULK:
 800         case USB_ENDPOINT_XFER_INT:
 801                 trb->ctrl = DWC3_TRBCTL_NORMAL;
 802                 break;
 803         default:
 804                 /*
 805                  * This is only possible with faulty memory because we
 806                  * checked it already :)
 807                  */
 808                 BUG();
 809         }
 810
 811         if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
 812                 trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
 813                 trb->ctrl |= DWC3_TRB_CTRL_CSP;
 814         } else if (last) {
 815                 trb->ctrl |= DWC3_TRB_CTRL_LST;
 816         }
 817
 818         if (chain)
 819                 trb->ctrl |= DWC3_TRB_CTRL_CHN;
 820
 821         if (usb_endpoint_xfer_bulk(dep->endpoint.desc) && dep->stream_capable)
 822                 trb->ctrl |= DWC3_TRB_CTRL_SID_SOFN(req->request.stream_id);
 823
 824         trb->ctrl |= DWC3_TRB_CTRL_HWO;
 825 }
 826
 827 /*
 828  * dwc3_prepare_trbs - setup TRBs from requests
 829  * @dep: endpoint for which requests are being prepared
 830  * @starting: true if the endpoint is idle and no requests are queued.
 831  *
 832  * The function goes through the requests list and sets up TRBs for the
 833  * transfers. The function returns once there are no more TRBs available or
 834  * it runs out of requests.
 835  */
 836 static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting)
 837 {
 838         struct dwc3_request     *req, *n;
 839         u32                     trbs_left;
 840         u32                     max;
 841         unsigned int            last_one = 0;
 842
 843         BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM);
 844
 845         /* the first request must not be queued */
 846         trbs_left = (dep->busy_slot - dep->free_slot) & DWC3_TRB_MASK;
 847
 848         /* Can't wrap around on a non-isoc EP since there's no link TRB */
 849         if (!usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
 850                 max = DWC3_TRB_NUM - (dep->free_slot & DWC3_TRB_MASK);
 851                 if (trbs_left > max)
 852                         trbs_left = max;
 853         }
 854
 855         /*
 856          * If busy & slot are equal than it is either full or empty. If we are
 857          * starting to process requests then we are empty. Otherwise we are
 858          * full and don't do anything
 859          */
 860         if (!trbs_left) {
 861                 if (!starting)
 862                         return;
 863                 trbs_left = DWC3_TRB_NUM;
 864                 /*
 865                  * In case we start from scratch, we queue the ISOC requests
 866                  * starting from slot 1. This is done because we use ring
 867                  * buffer and have no LST bit to stop us. Instead, we place
 868                  * IOC bit every TRB_NUM/4. We try to avoid having an interrupt
 869                  * after the first request so we start at slot 1 and have
 870                  * 7 requests proceed before we hit the first IOC.
 871                  * Other transfer types don't use the ring buffer and are
 872                  * processed from the first TRB until the last one. Since we
 873                  * don't wrap around we have to start at the beginning.
 874                  */
 875                 if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
 876                         dep->busy_slot = 1;
 877                         dep->free_slot = 1;
 878                 } else {
 879                         dep->busy_slot = 0;
 880                         dep->free_slot = 0;
 881                 }
 882         }
 883
 884         /* The last TRB is a link TRB, not used for xfer */
 885         if ((trbs_left <= 1) && usb_endpoint_xfer_isoc(dep->endpoint.desc))
 886                 return;
 887
 888         list_for_each_entry_safe(req, n, &dep->request_list, list) {
 889                 unsigned        length;
 890                 dma_addr_t      dma;
 891                 last_one = false;
 892
 893                 if (req->request.num_mapped_sgs > 0) {
 894                         struct usb_request *request = &req->request;
 895                         struct scatterlist *sg = request->sg;
 896                         struct scatterlist *s;
 897                         int             i;
 898
 899                         for_each_sg(sg, s, request->num_mapped_sgs, i) {
 900                                 unsigned chain = true;
 901
 902                                 length = sg_dma_len(s);
 903                                 dma = sg_dma_address(s);
 904
 905                                 if (i == (request->num_mapped_sgs - 1) ||
 906                                                 sg_is_last(s)) {
 907                                         if (list_is_last(&req->list,
 908                                                         &dep->request_list))
 909                                                 last_one = true;
 910                                         chain = false;
 911                                 }
 912
 913                                 trbs_left--;
 914                                 if (!trbs_left)
 915                                         last_one = true;
 916
 917                                 if (last_one)
 918                                         chain = false;
 919
 920                                 dwc3_prepare_one_trb(dep, req, dma, length,
 921                                                 last_one, chain, i);
 922
 923                                 if (last_one)
 924                                         break;
 925                         }
 926                 } else {
 927                         dma = req->request.dma;
 928                         length = req->request.length;
 929                         trbs_left--;
 930
 931                         if (!trbs_left)
 932                                 last_one = 1;
 933
 934                         /* Is this the last request? */
 935                         if (list_is_last(&req->list, &dep->request_list))
 936                                 last_one = 1;
 937
 938                         dwc3_prepare_one_trb(dep, req, dma, length,
 939                                         last_one, false, 0);
 940
 941                         if (last_one)
 942                                 break;
 943                 }
 944         }
 945 }
 946
 947 static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param,
 948                 int start_new)
 949 {
 950         struct dwc3_gadget_ep_cmd_params params;
 951         struct dwc3_request             *req;
 952         struct dwc3                     *dwc = dep->dwc;
 953         int                             ret;
 954         u32                             cmd;
 955
 956         if (start_new && (dep->flags & DWC3_EP_BUSY)) {
 957                 dev_vdbg(dwc->dev, "%s: endpoint busy\n", dep->name);
 958                 return -EBUSY;
 959         }
 960         dep->flags &= ~DWC3_EP_PENDING_REQUEST;
 961
 962         /*
 963          * If we are getting here after a short-out-packet we don't enqueue any
 964          * new requests as we try to set the IOC bit only on the last request.
 965          */
 966         if (start_new) {
 967                 if (list_empty(&dep->req_queued))
 968                         dwc3_prepare_trbs(dep, start_new);
 969
 970                 /* req points to the first request which will be sent */
 971                 req = next_request(&dep->req_queued);
 972         } else {
 973                 dwc3_prepare_trbs(dep, start_new);
 974
 975                 /*
 976                  * req points to the first request where HWO changed from 0 to 1
 977                  */
 978                 req = next_request(&dep->req_queued);
 979         }
 980         if (!req) {
 981                 dep->flags |= DWC3_EP_PENDING_REQUEST;
 982                 return 0;
 983         }
 984
 985         memset(&params, 0, sizeof(params));
 986
 987         if (start_new) {
 988                 params.param0 = upper_32_bits(req->trb_dma);
 989                 params.param1 = lower_32_bits(req->trb_dma);
 990                 cmd = DWC3_DEPCMD_STARTTRANSFER;
 991         } else {
 992                 cmd = DWC3_DEPCMD_UPDATETRANSFER;
 993         }
 994
 995         cmd |= DWC3_DEPCMD_PARAM(cmd_param);
 996         ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
 997         if (ret < 0) {
 998                 dev_dbg(dwc->dev, "failed to send STARTTRANSFER command\n");
 999
1000                 /*
1001                  * FIXME we need to iterate over the list of requests
1002                  * here and stop, unmap, free and del each of the linked
1003                  * requests instead of what we do now.
1004                  */
1005                 usb_gadget_unmap_request(&dwc->gadget, &req->request,
1006                                 req->direction);
1007                 list_del(&req->list);
1008                 return ret;
1009         }
1010
1011         dep->flags |= DWC3_EP_BUSY;
1012
1013         if (start_new) {
1014                 dep->resource_index = dwc3_gadget_ep_get_transfer_index(dwc,
1015                                 dep->number);
1016                 WARN_ON_ONCE(!dep->resource_index);
1017         }
1018
1019         return 0;
1020 }
1021
1022 static void __dwc3_gadget_start_isoc(struct dwc3 *dwc,
1023                 struct dwc3_ep *dep, u32 cur_uf)
1024 {
1025         u32 uf;
1026
1027         if (list_empty(&dep->request_list)) {
1028                 dev_vdbg(dwc->dev, "ISOC ep %s run out for requests.\n",
1029                         dep->name);
1030                 dep->flags |= DWC3_EP_PENDING_REQUEST;
1031                 return;
1032         }
1033
1034         /* 4 micro frames in the future */
1035         uf = cur_uf + dep->interval * 4;
1036
1037         __dwc3_gadget_kick_transfer(dep, uf, 1);
1038 }
1039
1040 static void dwc3_gadget_start_isoc(struct dwc3 *dwc,
1041                 struct dwc3_ep *dep, const struct dwc3_event_depevt *event)
1042 {
1043         u32 cur_uf, mask;
1044
1045         mask = ~(dep->interval - 1);
1046         cur_uf = event->parameters & mask;
1047
1048         __dwc3_gadget_start_isoc(dwc, dep, cur_uf);
1049 }
1050
1051 static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
1052 {
1053         struct dwc3             *dwc = dep->dwc;
1054         int                     ret;
1055
1056         req->request.actual     = 0;
1057         req->request.status     = -EINPROGRESS;
1058         req->direction          = dep->direction;
1059         req->epnum              = dep->number;
1060
1061         /*
1062          * We only add to our list of requests now and
1063          * start consuming the list once we get XferNotReady
1064          * IRQ.
1065          *
1066          * That way, we avoid doing anything that we don't need
1067          * to do now and defer it until the point we receive a
1068          * particular token from the Host side.
1069          *
1070          * This will also avoid Host cancelling URBs due to too
1071          * many NAKs.
1072          */
1073         ret = usb_gadget_map_request(&dwc->gadget, &req->request,
1074                         dep->direction);
1075         if (ret)
1076                 return ret;
1077
1078         list_add_tail(&req->list, &dep->request_list);
1079
1080         /*
1081          * There are a few special cases:
1082          *
1083          * 1. XferNotReady with empty list of requests. We need to kick the
1084          *    transfer here in that situation, otherwise we will be NAKing
1085          *    forever. If we get XferNotReady before gadget driver has a
1086          *    chance to queue a request, we will ACK the IRQ but won't be
1087          *    able to receive the data until the next request is queued.
1088          *    The following code is handling exactly that.
1089          *
1090          */
1091         if (dep->flags & DWC3_EP_PENDING_REQUEST) {
1092                 /*
1093                  * If xfernotready is already elapsed and it is a case
1094                  * of isoc transfer, then issue END TRANSFER, so that
1095                  * you can receive xfernotready again and can have
1096                  * notion of current microframe.
1097                  */
1098                 if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
1099                         if (list_empty(&dep->req_queued)) {
1100                                 dwc3_stop_active_transfer(dwc, dep->number);
1101                                 dep->flags = DWC3_EP_ENABLED;
1102                         }
1103                         return 0;
1104                 }
1105
1106                 ret = __dwc3_gadget_kick_transfer(dep, 0, true);
1107                 if (ret && ret != -EBUSY)
1108                         dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
1109                                         dep->name);
1110                 return ret;
1111         }
1112
1113         /*
1114          * 2. XferInProgress on Isoc EP with an active transfer. We need to
1115          *    kick the transfer here after queuing a request, otherwise the
1116          *    core may not see the modified TRB(s).
1117          */
1118         if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
1119                         (dep->flags & DWC3_EP_BUSY) &&
1120                         !(dep->flags & DWC3_EP_MISSED_ISOC)) {
1121                 WARN_ON_ONCE(!dep->resource_index);
1122                 ret = __dwc3_gadget_kick_transfer(dep, dep->resource_index,
1123                                 false);
1124                 if (ret && ret != -EBUSY)
1125                         dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
1126                                         dep->name);
1127                 return ret;
1128         }
1129
1130         return 0;
1131 }
1132
1133 static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request,
1134         gfp_t gfp_flags)
1135 {
1136         struct dwc3_request             *req = to_dwc3_request(request);
1137         struct dwc3_ep                  *dep = to_dwc3_ep(ep);
1138         struct dwc3                     *dwc = dep->dwc;
1139
1140         unsigned long                   flags;
1141
1142         int                             ret;
1143
1144         if (!dep->endpoint.desc) {
1145                 dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n",
1146                                 request, ep->name);
1147                 return -ESHUTDOWN;
1148         }
1149
1150         dev_vdbg(dwc->dev, "queing request %p to %s length %d\n",
1151                         request, ep->name, request->length);
1152
1153         spin_lock_irqsave(&dwc->lock, flags);
1154         ret = __dwc3_gadget_ep_queue(dep, req);
1155         spin_unlock_irqrestore(&dwc->lock, flags);
1156
1157         return ret;
1158 }
1159
1160 static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
1161                 struct usb_request *request)
1162 {
1163         struct dwc3_request             *req = to_dwc3_request(request);
1164         struct dwc3_request             *r = NULL;
1165
1166         struct dwc3_ep                  *dep = to_dwc3_ep(ep);
1167         struct dwc3                     *dwc = dep->dwc;
1168
1169         unsigned long                   flags;
1170         int                             ret = 0;
1171
1172         spin_lock_irqsave(&dwc->lock, flags);
1173
1174         list_for_each_entry(r, &dep->request_list, list) {
1175                 if (r == req)
1176                         break;
1177         }
1178
1179         if (r != req) {
1180                 list_for_each_entry(r, &dep->req_queued, list) {
1181                         if (r == req)
1182                                 break;
1183                 }
1184                 if (r == req) {
1185                         /* wait until it is processed */
1186                         dwc3_stop_active_transfer(dwc, dep->number);
1187                         goto out1;
1188                 }
1189                 dev_err(dwc->dev, "request %p was not queued to %s\n",
1190                                 request, ep->name);
1191                 ret = -EINVAL;
1192                 goto out0;
1193         }
1194
1195 out1:
1196         /* giveback the request */
1197         dwc3_gadget_giveback(dep, req, -ECONNRESET);
1198
1199 out0:
1200         spin_unlock_irqrestore(&dwc->lock, flags);
1201
1202         return ret;
1203 }
1204
1205 int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value)
1206 {
1207         struct dwc3_gadget_ep_cmd_params        params;
1208         struct dwc3                             *dwc = dep->dwc;
1209         int                                     ret;
1210
1211         memset(&params, 0x00, sizeof(params));
1212
1213         if (value) {
1214                 ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
1215                         DWC3_DEPCMD_SETSTALL, &params);
1216                 if (ret)
1217                         dev_err(dwc->dev, "failed to %s STALL on %s\n",
1218                                         value ? "set" : "clear",
1219                                         dep->name);
1220                 else
1221                         dep->flags |= DWC3_EP_STALL;
1222         } else {
1223                 if (dep->flags & DWC3_EP_WEDGE)
1224                         return 0;
1225
1226                 ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
1227                         DWC3_DEPCMD_CLEARSTALL, &params);
1228                 if (ret)
1229                         dev_err(dwc->dev, "failed to %s STALL on %s\n",
1230                                         value ? "set" : "clear",
1231                                         dep->name);
1232                 else
1233                         dep->flags &= ~DWC3_EP_STALL;
1234         }
1235
1236         return ret;
1237 }
1238
1239 static int dwc3_gadget_ep_set_halt(struct usb_ep *ep, int value)
1240 {
1241         struct dwc3_ep                  *dep = to_dwc3_ep(ep);
1242         struct dwc3                     *dwc = dep->dwc;
1243
1244         unsigned long                   flags;
1245
1246         int                             ret;
1247
1248         spin_lock_irqsave(&dwc->lock, flags);
1249
1250         if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
1251                 dev_err(dwc->dev, "%s is of Isochronous type\n", dep->name);
1252                 ret = -EINVAL;
1253                 goto out;
1254         }
1255
1256         ret = __dwc3_gadget_ep_set_halt(dep, value);
1257 out:
1258         spin_unlock_irqrestore(&dwc->lock, flags);
1259
1260         return ret;
1261 }
1262
1263 static int dwc3_gadget_ep_set_wedge(struct usb_ep *ep)
1264 {
1265         struct dwc3_ep                  *dep = to_dwc3_ep(ep);
1266         struct dwc3                     *dwc = dep->dwc;
1267         unsigned long                   flags;
1268
1269         spin_lock_irqsave(&dwc->lock, flags);
1270         dep->flags |= DWC3_EP_WEDGE;
1271         spin_unlock_irqrestore(&dwc->lock, flags);
1272
1273         if (dep->number == 0 || dep->number == 1)
1274                 return dwc3_gadget_ep0_set_halt(ep, 1);
1275         else
1276                 return dwc3_gadget_ep_set_halt(ep, 1);
1277 }
1278
1279 /* -------------------------------------------------------------------------- */
1280
1281 static struct usb_endpoint_descriptor dwc3_gadget_ep0_desc = {
1282         .bLength        = USB_DT_ENDPOINT_SIZE,
1283         .bDescriptorType = USB_DT_ENDPOINT,
1284         .bmAttributes   = USB_ENDPOINT_XFER_CONTROL,
1285 };
1286
1287 static const struct usb_ep_ops dwc3_gadget_ep0_ops = {
1288         .enable         = dwc3_gadget_ep0_enable,
1289         .disable        = dwc3_gadget_ep0_disable,
1290         .alloc_request  = dwc3_gadget_ep_alloc_request,
1291         .free_request   = dwc3_gadget_ep_free_request,
1292         .queue          = dwc3_gadget_ep0_queue,
1293         .dequeue        = dwc3_gadget_ep_dequeue,
1294         .set_halt       = dwc3_gadget_ep0_set_halt,
1295         .set_wedge      = dwc3_gadget_ep_set_wedge,
1296 };
1297
1298 static const struct usb_ep_ops dwc3_gadget_ep_ops = {
1299         .enable         = dwc3_gadget_ep_enable,
1300         .disable        = dwc3_gadget_ep_disable,
1301         .alloc_request  = dwc3_gadget_ep_alloc_request,
1302         .free_request   = dwc3_gadget_ep_free_request,
1303         .queue          = dwc3_gadget_ep_queue,
1304         .dequeue        = dwc3_gadget_ep_dequeue,
1305         .set_halt       = dwc3_gadget_ep_set_halt,
1306         .set_wedge      = dwc3_gadget_ep_set_wedge,
1307 };
1308
1309 /* -------------------------------------------------------------------------- */
1310
1311 static int dwc3_gadget_get_frame(struct usb_gadget *g)
1312 {
1313         struct dwc3             *dwc = gadget_to_dwc(g);
1314         u32                     reg;
1315
1316         reg = dwc3_readl(dwc->regs, DWC3_DSTS);
1317         return DWC3_DSTS_SOFFN(reg);
1318 }
1319
1320 static int dwc3_gadget_wakeup(struct usb_gadget *g)
1321 {
1322         struct dwc3             *dwc = gadget_to_dwc(g);
1323
1324         unsigned long           timeout;
1325         unsigned long           flags;
1326
1327         u32                     reg;
1328
1329         int                     ret = 0;
1330
1331         u8                      link_state;
1332         u8                      speed;
1333
1334         spin_lock_irqsave(&dwc->lock, flags);
1335
1336         /*
1337          * According to the Databook Remote wakeup request should
1338          * be issued only when the device is in early suspend state.
1339          *
1340          * We can check that via USB Link State bits in DSTS register.
1341          */
1342         reg = dwc3_readl(dwc->regs, DWC3_DSTS);
1343
1344         speed = reg & DWC3_DSTS_CONNECTSPD;
1345         if (speed == DWC3_DSTS_SUPERSPEED) {
1346                 dev_dbg(dwc->dev, "no wakeup on SuperSpeed\n");
1347                 ret = -EINVAL;
1348                 goto out;
1349         }
1350
1351         link_state = DWC3_DSTS_USBLNKST(reg);
1352
1353         switch (link_state) {
1354         case DWC3_LINK_STATE_RX_DET:    /* in HS, means Early Suspend */
1355         case DWC3_LINK_STATE_U3:        /* in HS, means SUSPEND */
1356                 break;
1357         default:
1358                 dev_dbg(dwc->dev, "can't wakeup from link state %d\n",
1359                                 link_state);
1360                 ret = -EINVAL;
1361                 goto out;
1362         }
1363
1364         ret = dwc3_gadget_set_link_state(dwc, DWC3_LINK_STATE_RECOV);
1365         if (ret < 0) {
1366                 dev_err(dwc->dev, "failed to put link in Recovery\n");
1367                 goto out;
1368         }
1369
1370         /* Recent versions do this automatically */
1371         if (dwc->revision < DWC3_REVISION_194A) {
1372                 /* write zeroes to Link Change Request */
1373                 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
1374                 reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK;
1375                 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
1376         }
1377
1378         /* poll until Link State changes to ON */
1379         timeout = jiffies + msecs_to_jiffies(100);
1380
1381         while (!time_after(jiffies, timeout)) {
1382                 reg = dwc3_readl(dwc->regs, DWC3_DSTS);
1383
1384                 /* in HS, means ON */
1385                 if (DWC3_DSTS_USBLNKST(reg) == DWC3_LINK_STATE_U0)
1386                         break;
1387         }
1388
1389         if (DWC3_DSTS_USBLNKST(reg) != DWC3_LINK_STATE_U0) {
1390                 dev_err(dwc->dev, "failed to send remote wakeup\n");
1391                 ret = -EINVAL;
1392         }
1393
1394 out:
1395         spin_unlock_irqrestore(&dwc->lock, flags);
1396
1397         return ret;
1398 }
1399
1400 static int dwc3_gadget_set_selfpowered(struct usb_gadget *g,
1401                 int is_selfpowered)
1402 {
1403         struct dwc3             *dwc = gadget_to_dwc(g);
1404         unsigned long           flags;
1405
1406         spin_lock_irqsave(&dwc->lock, flags);
1407         dwc->is_selfpowered = !!is_selfpowered;
1408         spin_unlock_irqrestore(&dwc->lock, flags);
1409
1410         return 0;
1411 }
1412
1413 static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on)
1414 {
1415         u32                     reg;
1416         u32                     timeout = 500;
1417
1418         reg = dwc3_readl(dwc->regs, DWC3_DCTL);
1419         if (is_on) {
1420                 if (dwc->revision <= DWC3_REVISION_187A) {
1421                         reg &= ~DWC3_DCTL_TRGTULST_MASK;
1422                         reg |= DWC3_DCTL_TRGTULST_RX_DET;
1423                 }
1424
1425                 if (dwc->revision >= DWC3_REVISION_194A)
1426                         reg &= ~DWC3_DCTL_KEEP_CONNECT;
1427                 reg |= DWC3_DCTL_RUN_STOP;
1428         } else {
1429                 reg &= ~DWC3_DCTL_RUN_STOP;
1430         }
1431
1432         dwc3_writel(dwc->regs, DWC3_DCTL, reg);
1433
1434         do {
1435                 reg = dwc3_readl(dwc->regs, DWC3_DSTS);
1436                 if (is_on) {
1437                         if (!(reg & DWC3_DSTS_DEVCTRLHLT))
1438                                 break;
1439                 } else {
1440                         if (reg & DWC3_DSTS_DEVCTRLHLT)
1441                                 break;
1442                 }
1443                 timeout--;
1444                 if (!timeout)
1445                         return -ETIMEDOUT;
1446                 udelay(1);
1447         } while (1);
1448
1449         dev_vdbg(dwc->dev, "gadget %s data soft-%s\n",
1450                         dwc->gadget_driver
1451                         ? dwc->gadget_driver->function : "no-function",
1452                         is_on ? "connect" : "disconnect");
1453
1454         return 0;
1455 }
1456
1457 static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
1458 {
1459         struct dwc3             *dwc = gadget_to_dwc(g);
1460         unsigned long           flags;
1461         int                     ret;
1462
1463         is_on = !!is_on;
1464
1465         spin_lock_irqsave(&dwc->lock, flags);
1466         ret = dwc3_gadget_run_stop(dwc, is_on);
1467         spin_unlock_irqrestore(&dwc->lock, flags);
1468
1469         return ret;
1470 }
1471
1472 static int dwc3_gadget_start(struct usb_gadget *g,
1473                 struct usb_gadget_driver *driver)
1474 {
1475         struct dwc3             *dwc = gadget_to_dwc(g);
1476         struct dwc3_ep          *dep;
1477         unsigned long           flags;
1478         int                     ret = 0;
1479         u32                     reg;
1480
1481         spin_lock_irqsave(&dwc->lock, flags);
1482
1483         if (dwc->gadget_driver) {
1484                 dev_err(dwc->dev, "%s is already bound to %s\n",
1485                                 dwc->gadget.name,
1486                                 dwc->gadget_driver->driver.name);
1487                 ret = -EBUSY;
1488                 goto err0;
1489         }
1490
1491         dwc->gadget_driver      = driver;
1492         dwc->gadget.dev.driver  = &driver->driver;
1493
1494         reg = dwc3_readl(dwc->regs, DWC3_DCFG);
1495         reg &= ~(DWC3_DCFG_SPEED_MASK);
1496
1497         /**
1498          * WORKAROUND: DWC3 revision < 2.20a have an issue
1499          * which would cause metastability state on Run/Stop
1500          * bit if we try to force the IP to USB2-only mode.
1501          *
1502          * Because of that, we cannot configure the IP to any
1503          * speed other than the SuperSpeed
1504          *
1505          * Refers to:
1506          *
1507          * STAR#9000525659: Clock Domain Crossing on DCTL in
1508          * USB 2.0 Mode
1509          */
1510         if (dwc->revision < DWC3_REVISION_220A)
1511                 reg |= DWC3_DCFG_SUPERSPEED;
1512         else
1513                 reg |= dwc->maximum_speed;
1514         dwc3_writel(dwc->regs, DWC3_DCFG, reg);
1515
1516         dwc->start_config_issued = false;
1517
1518         /* Start with SuperSpeed Default */
1519         dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
1520
1521         dep = dwc->eps[0];
1522         ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false);
1523         if (ret) {
1524                 dev_err(dwc->dev, "failed to enable %s\n", dep->name);
1525                 goto err0;
1526         }
1527
1528         dep = dwc->eps[1];
1529         ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false);
1530         if (ret) {
1531                 dev_err(dwc->dev, "failed to enable %s\n", dep->name);
1532                 goto err1;
1533         }
1534
1535         /* begin to receive SETUP packets */
1536         dwc->ep0state = EP0_SETUP_PHASE;
1537         dwc3_ep0_out_start(dwc);
1538
1539         spin_unlock_irqrestore(&dwc->lock, flags);
1540
1541         return 0;
1542
1543 err1:
1544         __dwc3_gadget_ep_disable(dwc->eps[0]);
1545
1546 err0:
1547         spin_unlock_irqrestore(&dwc->lock, flags);
1548
1549         return ret;
1550 }
1551
1552 static int dwc3_gadget_stop(struct usb_gadget *g,
1553                 struct usb_gadget_driver *driver)
1554 {
1555         struct dwc3             *dwc = gadget_to_dwc(g);
1556         unsigned long           flags;
1557
1558         spin_lock_irqsave(&dwc->lock, flags);
1559
1560         __dwc3_gadget_ep_disable(dwc->eps[0]);
1561         __dwc3_gadget_ep_disable(dwc->eps[1]);
1562
1563         dwc->gadget_driver      = NULL;
1564         dwc->gadget.dev.driver  = NULL;
1565
1566         spin_unlock_irqrestore(&dwc->lock, flags);
1567
1568         return 0;
1569 }
1570
1571 static const struct usb_gadget_ops dwc3_gadget_ops = {
1572         .get_frame              = dwc3_gadget_get_frame,
1573         .wakeup                 = dwc3_gadget_wakeup,
1574         .set_selfpowered        = dwc3_gadget_set_selfpowered,
1575         .pullup                 = dwc3_gadget_pullup,
1576         .udc_start              = dwc3_gadget_start,
1577         .udc_stop               = dwc3_gadget_stop,
1578 };
1579
1580 /* -------------------------------------------------------------------------- */
1581
1582 static int dwc3_gadget_init_endpoints(struct dwc3 *dwc)
1583 {
1584         struct dwc3_ep                  *dep;
1585         u8                              epnum;
1586
1587         INIT_LIST_HEAD(&dwc->gadget.ep_list);
1588
1589         for (epnum = 0; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
1590                 dep = kzalloc(sizeof(*dep), GFP_KERNEL);
1591                 if (!dep) {
1592                         dev_err(dwc->dev, "can't allocate endpoint %d\n",
1593                                         epnum);
1594                         return -ENOMEM;
1595                 }
1596
1597                 dep->dwc = dwc;
1598                 dep->number = epnum;
1599                 dwc->eps[epnum] = dep;
1600
1601                 snprintf(dep->name, sizeof(dep->name), "ep%d%s", epnum >> 1,
1602                                 (epnum & 1) ? "in" : "out");
1603                 dep->endpoint.name = dep->name;
1604                 dep->direction = (epnum & 1);
1605
1606                 if (epnum == 0 || epnum == 1) {
1607                         dep->endpoint.maxpacket = 512;
1608                         dep->endpoint.maxburst = 1;
1609                         dep->endpoint.ops = &dwc3_gadget_ep0_ops;
1610                         if (!epnum)
1611                                 dwc->gadget.ep0 = &dep->endpoint;
1612                 } else {
1613                         int             ret;
1614
1615                         dep->endpoint.maxpacket = 1024;
1616                         dep->endpoint.max_streams = 15;
1617                         dep->endpoint.ops = &dwc3_gadget_ep_ops;
1618                         list_add_tail(&dep->endpoint.ep_list,
1619                                         &dwc->gadget.ep_list);
1620
1621                         ret = dwc3_alloc_trb_pool(dep);
1622                         if (ret)
1623                                 return ret;
1624                 }
1625
1626                 INIT_LIST_HEAD(&dep->request_list);
1627                 INIT_LIST_HEAD(&dep->req_queued);
1628         }
1629
1630         return 0;
1631 }
1632
1633 static void dwc3_gadget_free_endpoints(struct dwc3 *dwc)
1634 {
1635         struct dwc3_ep                  *dep;
1636         u8                              epnum;
1637
1638         for (epnum = 0; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
1639                 dep = dwc->eps[epnum];
1640                 dwc3_free_trb_pool(dep);
1641
1642                 if (epnum != 0 && epnum != 1)
1643                         list_del(&dep->endpoint.ep_list);
1644
1645                 kfree(dep);
1646         }
1647 }
1648
1649 static void dwc3_gadget_release(struct device *dev)
1650 {
1651         dev_dbg(dev, "%s\n", __func__);
1652 }
1653
1654 /* -------------------------------------------------------------------------- */
1655 static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep,
1656                 struct dwc3_request *req, struct dwc3_trb *trb,
1657                 const struct dwc3_event_depevt *event, int status)
1658 {
1659         unsigned int            count;
1660         unsigned int            s_pkt = 0;
1661         unsigned int            trb_status;
1662
1663         if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN)
1664                 /*
1665                  * We continue despite the error. There is not much we
1666                  * can do. If we don't clean it up we loop forever. If
1667                  * we skip the TRB then it gets overwritten after a
1668                  * while since we use them in a ring buffer. A BUG()
1669                  * would help. Lets hope that if this occurs, someone
1670                  * fixes the root cause instead of looking away :)
1671                  */
1672                 dev_err(dwc->dev, "%s's TRB (%p) still owned by HW\n",
1673                                 dep->name, trb);
1674         count = trb->size & DWC3_TRB_SIZE_MASK;
1675
1676         if (dep->direction) {
1677                 if (count) {
1678                         trb_status = DWC3_TRB_SIZE_TRBSTS(trb->size);
1679                         if (trb_status == DWC3_TRBSTS_MISSED_ISOC) {
1680                                 dev_dbg(dwc->dev, "incomplete IN transfer %s\n",
1681                                                 dep->name);
1682                                 /*
1683                                  * If missed isoc occurred and there is
1684                                  * no request queued then issue END
1685                                  * TRANSFER, so that core generates
1686                                  * next xfernotready and we will issue
1687                                  * a fresh START TRANSFER.
1688                                  * If there are still queued request
1689                                  * then wait, do not issue either END
1690                                  * or UPDATE TRANSFER, just attach next
1691                                  * request in request_list during
1692                                  * giveback.If any future queued request
1693                                  * is successfully transferred then we
1694                                  * will issue UPDATE TRANSFER for all
1695                                  * request in the request_list.
1696                                  */
1697                                 dep->flags |= DWC3_EP_MISSED_ISOC;
1698                         } else {
1699                                 dev_err(dwc->dev, "incomplete IN transfer %s\n",
1700                                                 dep->name);
1701                                 status = -ECONNRESET;
1702                         }
1703                 } else {
1704                         dep->flags &= ~DWC3_EP_MISSED_ISOC;
1705                 }
1706         } else {
1707                 if (count && (event->status & DEPEVT_STATUS_SHORT))
1708                         s_pkt = 1;
1709         }
1710
1711         /*
1712          * We assume here we will always receive the entire data block
1713          * which we should receive. Meaning, if we program RX to
1714          * receive 4K but we receive only 2K, we assume that's all we
1715          * should receive and we simply bounce the request back to the
1716          * gadget driver for further processing.
1717          */
1718         req->request.actual += req->request.length - count;
1719         if (s_pkt)
1720                 return 1;
1721         if ((event->status & DEPEVT_STATUS_LST) &&
1722                         (trb->ctrl & (DWC3_TRB_CTRL_LST |
1723                                 DWC3_TRB_CTRL_HWO)))
1724                 return 1;
1725         if ((event->status & DEPEVT_STATUS_IOC) &&
1726                         (trb->ctrl & DWC3_TRB_CTRL_IOC))
1727                 return 1;
1728         return 0;
1729 }
1730
1731 static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
1732                 const struct dwc3_event_depevt *event, int status)
1733 {
1734         struct dwc3_request     *req;
1735         struct dwc3_trb         *trb;
1736         unsigned int            slot;
1737         unsigned int            i;
1738         int                     ret;
1739
1740         do {
1741                 req = next_request(&dep->req_queued);
1742                 if (!req) {
1743                         WARN_ON_ONCE(1);
1744                         return 1;
1745                 }
1746                 i = 0;
1747                 do {
1748                         slot = req->start_slot + i;
1749                         if ((slot == DWC3_TRB_NUM - 1) &&
1750                                 usb_endpoint_xfer_isoc(dep->endpoint.desc))
1751                                 slot++;
1752                         slot %= DWC3_TRB_NUM;
1753                         trb = &dep->trb_pool[slot];
1754
1755                         ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb,
1756                                         event, status);
1757                         if (ret)
1758                                 break;
1759                 }while (++i < req->request.num_mapped_sgs);
1760
1761                 dwc3_gadget_giveback(dep, req, status);
1762
1763                 if (ret)
1764                         break;
1765         } while (1);
1766
1767         if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
1768                         list_empty(&dep->req_queued)) {
1769                 if (list_empty(&dep->request_list)) {
1770                         /*
1771                          * If there is no entry in request list then do
1772                          * not issue END TRANSFER now. Just set PENDING
1773                          * flag, so that END TRANSFER is issued when an
1774                          * entry is added into request list.
1775                          */
1776                         dep->flags = DWC3_EP_PENDING_REQUEST;
1777                 } else {
1778                         dwc3_stop_active_transfer(dwc, dep->number);
1779                         dep->flags = DWC3_EP_ENABLED;
1780                 }
1781                 return 1;
1782         }
1783
1784         if ((event->status & DEPEVT_STATUS_IOC) &&
1785                         (trb->ctrl & DWC3_TRB_CTRL_IOC))
1786                 return 0;
1787         return 1;
1788 }
1789
1790 static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc,
1791                 struct dwc3_ep *dep, const struct dwc3_event_depevt *event,
1792                 int start_new)
1793 {
1794         unsigned                status = 0;
1795         int                     clean_busy;
1796
1797         if (event->status & DEPEVT_STATUS_BUSERR)
1798                 status = -ECONNRESET;
1799
1800         clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status);
1801         if (clean_busy)
1802                 dep->flags &= ~DWC3_EP_BUSY;
1803
1804         /*
1805          * WORKAROUND: This is the 2nd half of U1/U2 -> U0 workaround.
1806          * See dwc3_gadget_linksts_change_interrupt() for 1st half.
1807          */
1808         if (dwc->revision < DWC3_REVISION_183A) {
1809                 u32             reg;
1810                 int             i;
1811
1812                 for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) {
1813                         dep = dwc->eps[i];
1814
1815                         if (!(dep->flags & DWC3_EP_ENABLED))
1816                                 continue;
1817
1818                         if (!list_empty(&dep->req_queued))
1819                                 return;
1820                 }
1821
1822                 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
1823                 reg |= dwc->u1u2;
1824                 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
1825
1826                 dwc->u1u2 = 0;
1827         }
1828 }
1829
1830 static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
1831                 const struct dwc3_event_depevt *event)
1832 {
1833         struct dwc3_ep          *dep;
1834         u8                      epnum = event->endpoint_number;
1835
1836         dep = dwc->eps[epnum];
1837
1838         if (!(dep->flags & DWC3_EP_ENABLED))
1839                 return;
1840
1841         dev_vdbg(dwc->dev, "%s: %s\n", dep->name,
1842                         dwc3_ep_event_string(event->endpoint_event));
1843
1844         if (epnum == 0 || epnum == 1) {
1845                 dwc3_ep0_interrupt(dwc, event);
1846                 return;
1847         }
1848
1849         switch (event->endpoint_event) {
1850         case DWC3_DEPEVT_XFERCOMPLETE:
1851                 dep->resource_index = 0;
1852
1853                 if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
1854                         dev_dbg(dwc->dev, "%s is an Isochronous endpoint\n",
1855                                         dep->name);
1856                         return;
1857                 }
1858
1859                 dwc3_endpoint_transfer_complete(dwc, dep, event, 1);
1860                 break;
1861         case DWC3_DEPEVT_XFERINPROGRESS:
1862                 if (!usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
1863                         dev_dbg(dwc->dev, "%s is not an Isochronous endpoint\n",
1864                                         dep->name);
1865                         return;
1866                 }
1867
1868                 dwc3_endpoint_transfer_complete(dwc, dep, event, 0);
1869                 break;
1870         case DWC3_DEPEVT_XFERNOTREADY:
1871                 if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
1872                         dwc3_gadget_start_isoc(dwc, dep, event);
1873                 } else {
1874                         int ret;
1875
1876                         dev_vdbg(dwc->dev, "%s: reason %s\n",
1877                                         dep->name, event->status &
1878                                         DEPEVT_STATUS_TRANSFER_ACTIVE
1879                                         ? "Transfer Active"
1880                                         : "Transfer Not Active");
1881
1882                         ret = __dwc3_gadget_kick_transfer(dep, 0, 1);
1883                         if (!ret || ret == -EBUSY)
1884                                 return;
1885
1886                         dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
1887                                         dep->name);
1888                 }
1889
1890                 break;
1891         case DWC3_DEPEVT_STREAMEVT:
1892                 if (!usb_endpoint_xfer_bulk(dep->endpoint.desc)) {
1893                         dev_err(dwc->dev, "Stream event for non-Bulk %s\n",
1894                                         dep->name);
1895                         return;
1896                 }
1897
1898                 switch (event->status) {
1899                 case DEPEVT_STREAMEVT_FOUND:
1900                         dev_vdbg(dwc->dev, "Stream %d found and started\n",
1901                                         event->parameters);
1902
1903                         break;
1904                 case DEPEVT_STREAMEVT_NOTFOUND:
1905                         /* FALLTHROUGH */
1906                 default:
1907                         dev_dbg(dwc->dev, "Couldn't find suitable stream\n");
1908                 }
1909                 break;
1910         case DWC3_DEPEVT_RXTXFIFOEVT:
1911                 dev_dbg(dwc->dev, "%s FIFO Overrun\n", dep->name);
1912                 break;
1913         case DWC3_DEPEVT_EPCMDCMPLT:
1914                 dev_vdbg(dwc->dev, "Endpoint Command Complete\n");
1915                 break;
1916         }
1917 }
1918
1919 static void dwc3_disconnect_gadget(struct dwc3 *dwc)
1920 {
1921         if (dwc->gadget_driver && dwc->gadget_driver->disconnect) {
1922                 spin_unlock(&dwc->lock);
1923                 dwc->gadget_driver->disconnect(&dwc->gadget);
1924                 spin_lock(&dwc->lock);
1925         }
1926 }
1927
1928 static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum)
1929 {
1930         struct dwc3_ep *dep;
1931         struct dwc3_gadget_ep_cmd_params params;
1932         u32 cmd;
1933         int ret;
1934
1935         dep = dwc->eps[epnum];
1936
1937         if (!dep->resource_index)
1938                 return;
1939
1940         /*
1941          * NOTICE: We are violating what the Databook says about the
1942          * EndTransfer command. Ideally we would _always_ wait for the
1943          * EndTransfer Command Completion IRQ, but that's causing too
1944          * much trouble synchronizing between us and gadget driver.
1945          *
1946          * We have discussed this with the IP Provider and it was
1947          * suggested to giveback all requests here, but give HW some
1948          * extra time to synchronize with the interconnect. We're using
1949          * an arbitraty 100us delay for that.
1950          *
1951          * Note also that a similar handling was tested by Synopsys
1952          * (thanks a lot Paul) and nothing bad has come out of it.
1953          * In short, what we're doing is:
1954          *
1955          * - Issue EndTransfer WITH CMDIOC bit set
1956          * - Wait 100us
1957          */
1958
1959         cmd = DWC3_DEPCMD_ENDTRANSFER;
1960         cmd |= DWC3_DEPCMD_HIPRI_FORCERM | DWC3_DEPCMD_CMDIOC;
1961         cmd |= DWC3_DEPCMD_PARAM(dep->resource_index);
1962         memset(&params, 0, sizeof(params));
1963         ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
1964         WARN_ON_ONCE(ret);
1965         dep->resource_index = 0;
1966         dep->flags &= ~DWC3_EP_BUSY;
1967         udelay(100);
1968 }
1969
1970 static void dwc3_stop_active_transfers(struct dwc3 *dwc)
1971 {
1972         u32 epnum;
1973
1974         for (epnum = 2; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
1975                 struct dwc3_ep *dep;
1976
1977                 dep = dwc->eps[epnum];
1978                 if (!(dep->flags & DWC3_EP_ENABLED))
1979                         continue;
1980
1981                 dwc3_remove_requests(dwc, dep);
1982         }
1983 }
1984
1985 static void dwc3_clear_stall_all_ep(struct dwc3 *dwc)
1986 {
1987         u32 epnum;
1988
1989         for (epnum = 1; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
1990                 struct dwc3_ep *dep;
1991                 struct dwc3_gadget_ep_cmd_params params;
1992                 int ret;
1993
1994                 dep = dwc->eps[epnum];
1995
1996                 if (!(dep->flags & DWC3_EP_STALL))
1997                         continue;
1998
1999                 dep->flags &= ~DWC3_EP_STALL;
2000
2001                 memset(&params, 0, sizeof(params));
2002                 ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
2003                                 DWC3_DEPCMD_CLEARSTALL, &params);
2004                 WARN_ON_ONCE(ret);
2005         }
2006 }
2007
2008 static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
2009 {
2010         int                     reg;
2011
2012         dev_vdbg(dwc->dev, "%s\n", __func__);
2013
2014         reg = dwc3_readl(dwc->regs, DWC3_DCTL);
2015         reg &= ~DWC3_DCTL_INITU1ENA;
2016         dwc3_writel(dwc->regs, DWC3_DCTL, reg);
2017
2018         reg &= ~DWC3_DCTL_INITU2ENA;
2019         dwc3_writel(dwc->regs, DWC3_DCTL, reg);
2020
2021         dwc3_disconnect_gadget(dwc);
2022         dwc->start_config_issued = false;
2023
2024         dwc->gadget.speed = USB_SPEED_UNKNOWN;
2025         dwc->setup_packet_pending = false;
2026 }
2027
2028 static void dwc3_gadget_usb3_phy_suspend(struct dwc3 *dwc, int suspend)
2029 {
2030         u32                     reg;
2031
2032         reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
2033
2034         if (suspend)
2035                 reg |= DWC3_GUSB3PIPECTL_SUSPHY;
2036         else
2037                 reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
2038
2039         dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
2040 }
2041
2042 static void dwc3_gadget_usb2_phy_suspend(struct dwc3 *dwc, int suspend)
2043 {
2044         u32                     reg;
2045
2046         reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
2047
2048         if (suspend)
2049                 reg |= DWC3_GUSB2PHYCFG_SUSPHY;
2050         else
2051                 reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
2052
2053         dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
2054 }
2055
2056 static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
2057 {
2058         u32                     reg;
2059
2060         dev_vdbg(dwc->dev, "%s\n", __func__);
2061
2062         /*
2063          * WORKAROUND: DWC3 revisions <1.88a have an issue which
2064          * would cause a missing Disconnect Event if there's a
2065          * pending Setup Packet in the FIFO.
2066          *
2067          * There's no suggested workaround on the official Bug
2068          * report, which states that "unless the driver/application
2069          * is doing any special handling of a disconnect event,
2070          * there is no functional issue".
2071          *
2072          * Unfortunately, it turns out that we _do_ some special
2073          * handling of a disconnect event, namely complete all
2074          * pending transfers, notify gadget driver of the
2075          * disconnection, and so on.
2076          *
2077          * Our suggested workaround is to follow the Disconnect
2078          * Event steps here, instead, based on a setup_packet_pending
2079          * flag. Such flag gets set whenever we have a XferNotReady
2080          * event on EP0 and gets cleared on XferComplete for the
2081          * same endpoint.
2082          *
2083          * Refers to:
2084          *
2085          * STAR#9000466709: RTL: Device : Disconnect event not
2086          * generated if setup packet pending in FIFO
2087          */
2088         if (dwc->revision < DWC3_REVISION_188A) {
2089                 if (dwc->setup_packet_pending)
2090                         dwc3_gadget_disconnect_interrupt(dwc);
2091         }
2092
2093         /* after reset -> Default State */
2094         dwc->dev_state = DWC3_DEFAULT_STATE;
2095
2096         /* Recent versions support automatic phy suspend and don't need this */
2097         if (dwc->revision < DWC3_REVISION_194A) {
2098                 /* Resume PHYs */
2099                 dwc3_gadget_usb2_phy_suspend(dwc, false);
2100                 dwc3_gadget_usb3_phy_suspend(dwc, false);
2101         }
2102
2103         if (dwc->gadget.speed != USB_SPEED_UNKNOWN)
2104                 dwc3_disconnect_gadget(dwc);
2105
2106         reg = dwc3_readl(dwc->regs, DWC3_DCTL);
2107         reg &= ~DWC3_DCTL_TSTCTRL_MASK;
2108         dwc3_writel(dwc->regs, DWC3_DCTL, reg);
2109         dwc->test_mode = false;
2110
2111         dwc3_stop_active_transfers(dwc);
2112         dwc3_clear_stall_all_ep(dwc);
2113         dwc->start_config_issued = false;
2114
2115         /* Reset device address to zero */
2116         reg = dwc3_readl(dwc->regs, DWC3_DCFG);
2117         reg &= ~(DWC3_DCFG_DEVADDR_MASK);
2118         dwc3_writel(dwc->regs, DWC3_DCFG, reg);
2119 }
2120
2121 static void dwc3_update_ram_clk_sel(struct dwc3 *dwc, u32 speed)
2122 {
2123         u32 reg;
2124         u32 usb30_clock = DWC3_GCTL_CLK_BUS;
2125
2126         /*
2127          * We change the clock only at SS but I dunno why I would want to do
2128          * this. Maybe it becomes part of the power saving plan.
2129          */
2130
2131         if (speed != DWC3_DSTS_SUPERSPEED)
2132                 return;
2133
2134         /*
2135          * RAMClkSel is reset to 0 after USB reset, so it must be reprogrammed
2136          * each time on Connect Done.
2137          */
2138         if (!usb30_clock)
2139                 return;
2140
2141         reg = dwc3_readl(dwc->regs, DWC3_GCTL);
2142         reg |= DWC3_GCTL_RAMCLKSEL(usb30_clock);
2143         dwc3_writel(dwc->regs, DWC3_GCTL, reg);
2144 }
2145
2146 static void dwc3_gadget_phy_suspend(struct dwc3 *dwc, u8 speed)
2147 {
2148         switch (speed) {
2149         case USB_SPEED_SUPER:
2150                 dwc3_gadget_usb2_phy_suspend(dwc, true);
2151                 break;
2152         case USB_SPEED_HIGH:
2153         case USB_SPEED_FULL:
2154         case USB_SPEED_LOW:
2155                 dwc3_gadget_usb3_phy_suspend(dwc, true);
2156                 break;
2157         }
2158 }
2159
2160 static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
2161 {
2162         struct dwc3_gadget_ep_cmd_params params;
2163         struct dwc3_ep          *dep;
2164         int                     ret;
2165         u32                     reg;
2166         u8                      speed;
2167
2168         dev_vdbg(dwc->dev, "%s\n", __func__);
2169
2170         memset(&params, 0x00, sizeof(params));
2171
2172         reg = dwc3_readl(dwc->regs, DWC3_DSTS);
2173         speed = reg & DWC3_DSTS_CONNECTSPD;
2174         dwc->speed = speed;
2175
2176         dwc3_update_ram_clk_sel(dwc, speed);
2177
2178         switch (speed) {
2179         case DWC3_DCFG_SUPERSPEED:
2180                 /*
2181                  * WORKAROUND: DWC3 revisions <1.90a have an issue which
2182                  * would cause a missing USB3 Reset event.
2183                  *
2184                  * In such situations, we should force a USB3 Reset
2185                  * event by calling our dwc3_gadget_reset_interrupt()
2186                  * routine.
2187                  *
2188                  * Refers to:
2189                  *
2190                  * STAR#9000483510: RTL: SS : USB3 reset event may
2191                  * not be generated always when the link enters poll
2192                  */
2193                 if (dwc->revision < DWC3_REVISION_190A)
2194                         dwc3_gadget_reset_interrupt(dwc);
2195
2196                 dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
2197                 dwc->gadget.ep0->maxpacket = 512;
2198                 dwc->gadget.speed = USB_SPEED_SUPER;
2199                 break;
2200         case DWC3_DCFG_HIGHSPEED:
2201                 dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
2202                 dwc->gadget.ep0->maxpacket = 64;
2203                 dwc->gadget.speed = USB_SPEED_HIGH;
2204                 break;
2205         case DWC3_DCFG_FULLSPEED2:
2206         case DWC3_DCFG_FULLSPEED1:
2207                 dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
2208                 dwc->gadget.ep0->maxpacket = 64;
2209                 dwc->gadget.speed = USB_SPEED_FULL;
2210                 break;
2211         case DWC3_DCFG_LOWSPEED:
2212                 dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(8);
2213                 dwc->gadget.ep0->maxpacket = 8;
2214                 dwc->gadget.speed = USB_SPEED_LOW;
2215                 break;
2216         }
2217
2218         /* Enable USB2 LPM Capability */
2219
2220         if ((dwc->revision > DWC3_REVISION_194A)
2221                         && (speed != DWC3_DCFG_SUPERSPEED)) {
2222                 reg = dwc3_readl(dwc->regs, DWC3_DCFG);
2223                 reg |= DWC3_DCFG_LPM_CAP;
2224                 dwc3_writel(dwc->regs, DWC3_DCFG, reg);
2225
2226                 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
2227                 reg &= ~(DWC3_DCTL_HIRD_THRES_MASK | DWC3_DCTL_L1_HIBER_EN);
2228
2229                 /*
2230                  * TODO: This should be configurable. For now using
2231                  * maximum allowed HIRD threshold value of 0b1100
2232                  */
2233                 reg |= DWC3_DCTL_HIRD_THRES(12);
2234
2235                 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
2236         }
2237
2238         /* Recent versions support automatic phy suspend and don't need this */
2239         if (dwc->revision < DWC3_REVISION_194A) {
2240                 /* Suspend unneeded PHY */
2241                 dwc3_gadget_phy_suspend(dwc, dwc->gadget.speed);
2242         }
2243
2244         dep = dwc->eps[0];
2245         ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true);
2246         if (ret) {
2247                 dev_err(dwc->dev, "failed to enable %s\n", dep->name);
2248                 return;
2249         }
2250
2251         dep = dwc->eps[1];
2252         ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true);
2253         if (ret) {
2254                 dev_err(dwc->dev, "failed to enable %s\n", dep->name);
2255                 return;
2256         }
2257
2258         /*
2259          * Configure PHY via GUSB3PIPECTLn if required.
2260          *
2261          * Update GTXFIFOSIZn
2262          *
2263          * In both cases reset values should be sufficient.
2264          */
2265 }
2266
2267 static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc)
2268 {
2269         dev_vdbg(dwc->dev, "%s\n", __func__);
2270
2271         /*
2272          * TODO take core out of low power mode when that's
2273          * implemented.
2274          */
2275
2276         dwc->gadget_driver->resume(&dwc->gadget);
2277 }
2278
2279 static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
2280                 unsigned int evtinfo)
2281 {
2282         enum dwc3_link_state    next = evtinfo & DWC3_LINK_STATE_MASK;
2283
2284         /*
2285          * WORKAROUND: DWC3 Revisions <1.83a have an issue which, depending
2286          * on the link partner, the USB session might do multiple entry/exit
2287          * of low power states before a transfer takes place.
2288          *
2289          * Due to this problem, we might experience lower throughput. The
2290          * suggested workaround is to disable DCTL[12:9] bits if we're
2291          * transitioning from U1/U2 to U0 and enable those bits again
2292          * after a transfer completes and there are no pending transfers
2293          * on any of the enabled endpoints.
2294          *
2295          * This is the first half of that workaround.
2296          *
2297          * Refers to:
2298          *
2299          * STAR#9000446952: RTL: Device SS : if U1/U2 ->U0 takes >128us
2300          * core send LGO_Ux entering U0
2301          */
2302         if (dwc->revision < DWC3_REVISION_183A) {
2303                 if (next == DWC3_LINK_STATE_U0) {
2304                         u32     u1u2;
2305                         u32     reg;
2306
2307                         switch (dwc->link_state) {
2308                         case DWC3_LINK_STATE_U1:
2309                         case DWC3_LINK_STATE_U2:
2310                                 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
2311                                 u1u2 = reg & (DWC3_DCTL_INITU2ENA
2312                                                 | DWC3_DCTL_ACCEPTU2ENA
2313                                                 | DWC3_DCTL_INITU1ENA
2314                                                 | DWC3_DCTL_ACCEPTU1ENA);
2315
2316                                 if (!dwc->u1u2)
2317                                         dwc->u1u2 = reg & u1u2;
2318
2319                                 reg &= ~u1u2;
2320
2321                                 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
2322                                 break;
2323                         default:
2324                                 /* do nothing */
2325                                 break;
2326                         }
2327                 }
2328         }
2329
2330         dwc->link_state = next;
2331
2332         dev_vdbg(dwc->dev, "%s link %d\n", __func__, dwc->link_state);
2333 }
2334
2335 static void dwc3_gadget_interrupt(struct dwc3 *dwc,
2336                 const struct dwc3_event_devt *event)
2337 {
2338         switch (event->type) {
2339         case DWC3_DEVICE_EVENT_DISCONNECT:
2340                 dwc3_gadget_disconnect_interrupt(dwc);
2341                 break;
2342         case DWC3_DEVICE_EVENT_RESET:
2343                 dwc3_gadget_reset_interrupt(dwc);
2344                 break;
2345         case DWC3_DEVICE_EVENT_CONNECT_DONE:
2346                 dwc3_gadget_conndone_interrupt(dwc);
2347                 break;
2348         case DWC3_DEVICE_EVENT_WAKEUP:
2349                 dwc3_gadget_wakeup_interrupt(dwc);
2350                 break;
2351         case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE:
2352                 dwc3_gadget_linksts_change_interrupt(dwc, event->event_info);
2353                 break;
2354         case DWC3_DEVICE_EVENT_EOPF:
2355                 dev_vdbg(dwc->dev, "End of Periodic Frame\n");
2356                 break;
2357         case DWC3_DEVICE_EVENT_SOF:
2358                 dev_vdbg(dwc->dev, "Start of Periodic Frame\n");
2359                 break;
2360         case DWC3_DEVICE_EVENT_ERRATIC_ERROR:
2361                 dev_vdbg(dwc->dev, "Erratic Error\n");
2362                 break;
2363         case DWC3_DEVICE_EVENT_CMD_CMPL:
2364                 dev_vdbg(dwc->dev, "Command Complete\n");
2365                 break;
2366         case DWC3_DEVICE_EVENT_OVERFLOW:
2367                 dev_vdbg(dwc->dev, "Overflow\n");
2368                 break;
2369         default:
2370                 dev_dbg(dwc->dev, "UNKNOWN IRQ %d\n", event->type);
2371         }
2372 }
2373
2374 static void dwc3_process_event_entry(struct dwc3 *dwc,
2375                 const union dwc3_event *event)
2376 {
2377         /* Endpoint IRQ, handle it and return early */
2378         if (event->type.is_devspec == 0) {
2379                 /* depevt */
2380                 return dwc3_endpoint_interrupt(dwc, &event->depevt);
2381         }
2382
2383         switch (event->type.type) {
2384         case DWC3_EVENT_TYPE_DEV:
2385                 dwc3_gadget_interrupt(dwc, &event->devt);
2386                 break;
2387         /* REVISIT what to do with Carkit and I2C events ? */
2388         default:
2389                 dev_err(dwc->dev, "UNKNOWN IRQ type %d\n", event->raw);
2390         }
2391 }
2392
2393 static irqreturn_t dwc3_process_event_buf(struct dwc3 *dwc, u32 buf)
2394 {
2395         struct dwc3_event_buffer *evt;
2396         int left;
2397         u32 count;
2398
2399         count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(buf));
2400         count &= DWC3_GEVNTCOUNT_MASK;
2401         if (!count)
2402                 return IRQ_NONE;
2403
2404         evt = dwc->ev_buffs[buf];
2405         left = count;
2406
2407         while (left > 0) {
2408                 union dwc3_event event;
2409
2410                 event.raw = *(u32 *) (evt->buf + evt->lpos);
2411
2412                 dwc3_process_event_entry(dwc, &event);
2413                 /*
2414                  * XXX we wrap around correctly to the next entry as almost all
2415                  * entries are 4 bytes in size. There is one entry which has 12
2416                  * bytes which is a regular entry followed by 8 bytes data. ATM
2417                  * I don't know how things are organized if were get next to the
2418                  * a boundary so I worry about that once we try to handle that.
2419                  */
2420                 evt->lpos = (evt->lpos + 4) % DWC3_EVENT_BUFFERS_SIZE;
2421                 left -= 4;
2422
2423                 dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(buf), 4);
2424         }
2425
2426         return IRQ_HANDLED;
2427 }
2428
2429 static irqreturn_t dwc3_interrupt(int irq, void *_dwc)
2430 {
2431         struct dwc3                     *dwc = _dwc;
2432         int                             i;
2433         irqreturn_t                     ret = IRQ_NONE;
2434
2435         spin_lock(&dwc->lock);
2436
2437         for (i = 0; i < dwc->num_event_buffers; i++) {
2438                 irqreturn_t status;
2439
2440                 status = dwc3_process_event_buf(dwc, i);
2441                 if (status == IRQ_HANDLED)
2442                         ret = status;
2443         }
2444
2445         spin_unlock(&dwc->lock);
2446
2447         return ret;
2448 }
2449
2450 /**
2451  * dwc3_gadget_init - Initializes gadget related registers
2452  * @dwc: pointer to our controller context structure
2453  *
2454  * Returns 0 on success otherwise negative errno.
2455  */
2456 int dwc3_gadget_init(struct dwc3 *dwc)
2457 {
2458         u32                                     reg;
2459         int                                     ret;
2460         int                                     irq;
2461
2462         dwc->ctrl_req = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
2463                         &dwc->ctrl_req_addr, GFP_KERNEL);
2464         if (!dwc->ctrl_req) {
2465                 dev_err(dwc->dev, "failed to allocate ctrl request\n");
2466                 ret = -ENOMEM;
2467                 goto err0;
2468         }
2469
2470         dwc->ep0_trb = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ep0_trb),
2471                         &dwc->ep0_trb_addr, GFP_KERNEL);
2472         if (!dwc->ep0_trb) {
2473                 dev_err(dwc->dev, "failed to allocate ep0 trb\n");
2474                 ret = -ENOMEM;
2475                 goto err1;
2476         }
2477
2478         dwc->setup_buf = kzalloc(DWC3_EP0_BOUNCE_SIZE, GFP_KERNEL);
2479         if (!dwc->setup_buf) {
2480                 dev_err(dwc->dev, "failed to allocate setup buffer\n");
2481                 ret = -ENOMEM;
2482                 goto err2;
2483         }
2484
2485         dwc->ep0_bounce = dma_alloc_coherent(dwc->dev,
2486                         DWC3_EP0_BOUNCE_SIZE, &dwc->ep0_bounce_addr,
2487                         GFP_KERNEL);
2488         if (!dwc->ep0_bounce) {
2489                 dev_err(dwc->dev, "failed to allocate ep0 bounce buffer\n");
2490                 ret = -ENOMEM;
2491                 goto err3;
2492         }
2493
2494         dev_set_name(&dwc->gadget.dev, "gadget");
2495
2496         dwc->gadget.ops                 = &dwc3_gadget_ops;
2497         dwc->gadget.max_speed           = USB_SPEED_SUPER;
2498         dwc->gadget.speed               = USB_SPEED_UNKNOWN;
2499         dwc->gadget.dev.parent          = dwc->dev;
2500         dwc->gadget.sg_supported        = true;
2501
2502         dma_set_coherent_mask(&dwc->gadget.dev, dwc->dev->coherent_dma_mask);
2503
2504         dwc->gadget.dev.dma_parms       = dwc->dev->dma_parms;
2505         dwc->gadget.dev.dma_mask        = dwc->dev->dma_mask;
2506         dwc->gadget.dev.release         = dwc3_gadget_release;
2507         dwc->gadget.name                = "dwc3-gadget";
2508
2509         /*
2510          * REVISIT: Here we should clear all pending IRQs to be
2511          * sure we're starting from a well known location.
2512          */
2513
2514         ret = dwc3_gadget_init_endpoints(dwc);
2515         if (ret)
2516                 goto err4;
2517
2518         irq = platform_get_irq(to_platform_device(dwc->dev), 0);
2519
2520         ret = request_irq(irq, dwc3_interrupt, IRQF_SHARED,
2521                         "dwc3", dwc);
2522         if (ret) {
2523                 dev_err(dwc->dev, "failed to request irq #%d --> %d\n",
2524                                 irq, ret);
2525                 goto err5;
2526         }
2527
2528         reg = dwc3_readl(dwc->regs, DWC3_DCFG);
2529         reg |= DWC3_DCFG_LPM_CAP;
2530         dwc3_writel(dwc->regs, DWC3_DCFG, reg);
2531
2532         /* Enable all but Start and End of Frame IRQs */
2533         reg = (DWC3_DEVTEN_VNDRDEVTSTRCVEDEN |
2534                         DWC3_DEVTEN_EVNTOVERFLOWEN |
2535                         DWC3_DEVTEN_CMDCMPLTEN |
2536                         DWC3_DEVTEN_ERRTICERREN |
2537                         DWC3_DEVTEN_WKUPEVTEN |
2538                         DWC3_DEVTEN_ULSTCNGEN |
2539                         DWC3_DEVTEN_CONNECTDONEEN |
2540                         DWC3_DEVTEN_USBRSTEN |
2541                         DWC3_DEVTEN_DISCONNEVTEN);
2542         dwc3_writel(dwc->regs, DWC3_DEVTEN, reg);
2543
2544         /* automatic phy suspend only on recent versions */
2545         if (dwc->revision >= DWC3_REVISION_194A) {
2546                 dwc3_gadget_usb2_phy_suspend(dwc, false);
2547                 dwc3_gadget_usb3_phy_suspend(dwc, false);
2548         }
2549
2550         ret = device_register(&dwc->gadget.dev);
2551         if (ret) {
2552                 dev_err(dwc->dev, "failed to register gadget device\n");
2553                 put_device(&dwc->gadget.dev);
2554                 goto err6;
2555         }
2556
2557         ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget);
2558         if (ret) {
2559                 dev_err(dwc->dev, "failed to register udc\n");
2560                 goto err7;
2561         }
2562
2563         return 0;
2564
2565 err7:
2566         device_unregister(&dwc->gadget.dev);
2567
2568 err6:
2569         dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00);
2570         free_irq(irq, dwc);
2571
2572 err5:
2573         dwc3_gadget_free_endpoints(dwc);
2574
2575 err4:
2576         dma_free_coherent(dwc->dev, DWC3_EP0_BOUNCE_SIZE,
2577                         dwc->ep0_bounce, dwc->ep0_bounce_addr);
2578
2579 err3:
2580         kfree(dwc->setup_buf);
2581
2582 err2:
2583         dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb),
2584                         dwc->ep0_trb, dwc->ep0_trb_addr);
2585
2586 err1:
2587         dma_free_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
2588                         dwc->ctrl_req, dwc->ctrl_req_addr);
2589
2590 err0:
2591         return ret;
2592 }
2593
2594 void dwc3_gadget_exit(struct dwc3 *dwc)
2595 {
2596         int                     irq;
2597
2598         usb_del_gadget_udc(&dwc->gadget);
2599         irq = platform_get_irq(to_platform_device(dwc->dev), 0);
2600
2601         dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00);
2602         free_irq(irq, dwc);
2603
2604         dwc3_gadget_free_endpoints(dwc);
2605
2606         dma_free_coherent(dwc->dev, DWC3_EP0_BOUNCE_SIZE,
2607                         dwc->ep0_bounce, dwc->ep0_bounce_addr);
2608
2609         kfree(dwc->setup_buf);
2610
2611         dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb),
2612                         dwc->ep0_trb, dwc->ep0_trb_addr);
2613
2614         dma_free_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
2615                         dwc->ctrl_req, dwc->ctrl_req_addr);
2616
2617         device_unregister(&dwc->gadget.dev);
2618 }