2 * (C) Copyright Linus Torvalds 1999
3 * (C) Copyright Johannes Erdfelt 1999-2001
4 * (C) Copyright Andreas Gal 1999
5 * (C) Copyright Gregory P. Smith 1999
6 * (C) Copyright Deti Fliegl 1999
7 * (C) Copyright Randy Dunlap 2000
8 * (C) Copyright David Brownell 2000-2002
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the
12 * Free Software Foundation; either version 2 of the License, or (at your
13 * option) any later version.
15 * This program is distributed in the hope that it will be useful, but
16 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
17 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software Foundation,
22 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 #include <linux/bcd.h>
26 #include <linux/module.h>
27 #include <linux/version.h>
28 #include <linux/kernel.h>
29 #include <linux/slab.h>
30 #include <linux/completion.h>
31 #include <linux/utsname.h>
34 #include <linux/device.h>
35 #include <linux/dma-mapping.h>
36 #include <linux/mutex.h>
38 #include <asm/byteorder.h>
39 #include <asm/unaligned.h>
40 #include <linux/platform_device.h>
41 #include <linux/workqueue.h>
42 #include <linux/pm_runtime.h>
43 #include <linux/types.h>
45 #include <linux/phy/phy.h>
46 #include <linux/usb.h>
47 #include <linux/usb/hcd.h>
48 #include <linux/usb/phy.h>
53 /*-------------------------------------------------------------------------*/
56 * USB Host Controller Driver framework
58 * Plugs into usbcore (usb_bus) and lets HCDs share code, minimizing
59 * HCD-specific behaviors/bugs.
61 * This does error checks, tracks devices and urbs, and delegates to a
62 * "hc_driver" only for code (and data) that really needs to know about
63 * hardware differences. That includes root hub registers, i/o queues,
64 * and so on ... but as little else as possible.
66 * Shared code includes most of the "root hub" code (these are emulated,
67 * though each HC's hardware works differently) and PCI glue, plus request
68 * tracking overhead. The HCD code should only block on spinlocks or on
69 * hardware handshaking; blocking on software events (such as other kernel
70 * threads releasing resources, or completing actions) is all generic.
72 * Happens the USB 2.0 spec says this would be invisible inside the "USBD",
73 * and includes mostly a "HCDI" (HCD Interface) along with some APIs used
74 * only by the hub driver ... and that neither should be seen or used by
75 * usb client device drivers.
77 * Contributors of ideas or unattributed patches include: David Brownell,
78 * Roman Weissgaerber, Rory Bolt, Greg Kroah-Hartman, ...
81 * 2002-02-21 Pull in most of the usb_bus support from usb.c; some
82 * associated cleanup. "usb_hcd" still != "usb_bus".
83 * 2001-12-12 Initial patch version for Linux 2.5.1 kernel.
86 /*-------------------------------------------------------------------------*/
88 /* Keep track of which host controller drivers are loaded */
89 unsigned long usb_hcds_loaded;
90 EXPORT_SYMBOL_GPL(usb_hcds_loaded);
92 /* host controllers we manage */
93 LIST_HEAD (usb_bus_list);
94 EXPORT_SYMBOL_GPL (usb_bus_list);
96 /* used when allocating bus numbers */
98 static DECLARE_BITMAP(busmap, USB_MAXBUS);
100 /* used when updating list of hcds */
101 DEFINE_MUTEX(usb_bus_list_lock); /* exported only for usbfs */
102 EXPORT_SYMBOL_GPL (usb_bus_list_lock);
104 /* used for controlling access to virtual root hubs */
105 static DEFINE_SPINLOCK(hcd_root_hub_lock);
107 /* used when updating an endpoint's URB list */
108 static DEFINE_SPINLOCK(hcd_urb_list_lock);
110 /* used to protect against unlinking URBs after the device is gone */
111 static DEFINE_SPINLOCK(hcd_urb_unlink_lock);
113 /* wait queue for synchronous unlinks */
114 DECLARE_WAIT_QUEUE_HEAD(usb_kill_urb_queue);
116 static inline int is_root_hub(struct usb_device *udev)
118 return (udev->parent == NULL);
121 /*-------------------------------------------------------------------------*/
124 * Sharable chunks of root hub code.
127 /*-------------------------------------------------------------------------*/
128 #define KERNEL_REL bin2bcd(((LINUX_VERSION_CODE >> 16) & 0x0ff))
129 #define KERNEL_VER bin2bcd(((LINUX_VERSION_CODE >> 8) & 0x0ff))
131 /* usb 3.0 root hub device descriptor */
132 static const u8 usb3_rh_dev_descriptor[18] = {
133 0x12, /* __u8 bLength; */
134 0x01, /* __u8 bDescriptorType; Device */
135 0x00, 0x03, /* __le16 bcdUSB; v3.0 */
137 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
138 0x00, /* __u8 bDeviceSubClass; */
139 0x03, /* __u8 bDeviceProtocol; USB 3.0 hub */
140 0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */
142 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
143 0x03, 0x00, /* __le16 idProduct; device 0x0003 */
144 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
146 0x03, /* __u8 iManufacturer; */
147 0x02, /* __u8 iProduct; */
148 0x01, /* __u8 iSerialNumber; */
149 0x01 /* __u8 bNumConfigurations; */
152 /* usb 2.5 (wireless USB 1.0) root hub device descriptor */
153 static const u8 usb25_rh_dev_descriptor[18] = {
154 0x12, /* __u8 bLength; */
155 0x01, /* __u8 bDescriptorType; Device */
156 0x50, 0x02, /* __le16 bcdUSB; v2.5 */
158 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
159 0x00, /* __u8 bDeviceSubClass; */
160 0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */
161 0xFF, /* __u8 bMaxPacketSize0; always 0xFF (WUSB Spec 7.4.1). */
163 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
164 0x02, 0x00, /* __le16 idProduct; device 0x0002 */
165 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
167 0x03, /* __u8 iManufacturer; */
168 0x02, /* __u8 iProduct; */
169 0x01, /* __u8 iSerialNumber; */
170 0x01 /* __u8 bNumConfigurations; */
173 /* usb 2.0 root hub device descriptor */
174 static const u8 usb2_rh_dev_descriptor[18] = {
175 0x12, /* __u8 bLength; */
176 0x01, /* __u8 bDescriptorType; Device */
177 0x00, 0x02, /* __le16 bcdUSB; v2.0 */
179 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
180 0x00, /* __u8 bDeviceSubClass; */
181 0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */
182 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
184 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
185 0x02, 0x00, /* __le16 idProduct; device 0x0002 */
186 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
188 0x03, /* __u8 iManufacturer; */
189 0x02, /* __u8 iProduct; */
190 0x01, /* __u8 iSerialNumber; */
191 0x01 /* __u8 bNumConfigurations; */
194 /* no usb 2.0 root hub "device qualifier" descriptor: one speed only */
196 /* usb 1.1 root hub device descriptor */
197 static const u8 usb11_rh_dev_descriptor[18] = {
198 0x12, /* __u8 bLength; */
199 0x01, /* __u8 bDescriptorType; Device */
200 0x10, 0x01, /* __le16 bcdUSB; v1.1 */
202 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
203 0x00, /* __u8 bDeviceSubClass; */
204 0x00, /* __u8 bDeviceProtocol; [ low/full speeds only ] */
205 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
207 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
208 0x01, 0x00, /* __le16 idProduct; device 0x0001 */
209 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
211 0x03, /* __u8 iManufacturer; */
212 0x02, /* __u8 iProduct; */
213 0x01, /* __u8 iSerialNumber; */
214 0x01 /* __u8 bNumConfigurations; */
218 /*-------------------------------------------------------------------------*/
220 /* Configuration descriptors for our root hubs */
222 static const u8 fs_rh_config_descriptor[] = {
224 /* one configuration */
225 0x09, /* __u8 bLength; */
226 0x02, /* __u8 bDescriptorType; Configuration */
227 0x19, 0x00, /* __le16 wTotalLength; */
228 0x01, /* __u8 bNumInterfaces; (1) */
229 0x01, /* __u8 bConfigurationValue; */
230 0x00, /* __u8 iConfiguration; */
231 0xc0, /* __u8 bmAttributes;
236 0x00, /* __u8 MaxPower; */
239 * USB 2.0, single TT organization (mandatory):
240 * one interface, protocol 0
242 * USB 2.0, multiple TT organization (optional):
243 * two interfaces, protocols 1 (like single TT)
244 * and 2 (multiple TT mode) ... config is
250 0x09, /* __u8 if_bLength; */
251 0x04, /* __u8 if_bDescriptorType; Interface */
252 0x00, /* __u8 if_bInterfaceNumber; */
253 0x00, /* __u8 if_bAlternateSetting; */
254 0x01, /* __u8 if_bNumEndpoints; */
255 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
256 0x00, /* __u8 if_bInterfaceSubClass; */
257 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
258 0x00, /* __u8 if_iInterface; */
260 /* one endpoint (status change endpoint) */
261 0x07, /* __u8 ep_bLength; */
262 0x05, /* __u8 ep_bDescriptorType; Endpoint */
263 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
264 0x03, /* __u8 ep_bmAttributes; Interrupt */
265 0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
266 0xff /* __u8 ep_bInterval; (255ms -- usb 2.0 spec) */
269 static const u8 hs_rh_config_descriptor[] = {
271 /* one configuration */
272 0x09, /* __u8 bLength; */
273 0x02, /* __u8 bDescriptorType; Configuration */
274 0x19, 0x00, /* __le16 wTotalLength; */
275 0x01, /* __u8 bNumInterfaces; (1) */
276 0x01, /* __u8 bConfigurationValue; */
277 0x00, /* __u8 iConfiguration; */
278 0xc0, /* __u8 bmAttributes;
283 0x00, /* __u8 MaxPower; */
286 * USB 2.0, single TT organization (mandatory):
287 * one interface, protocol 0
289 * USB 2.0, multiple TT organization (optional):
290 * two interfaces, protocols 1 (like single TT)
291 * and 2 (multiple TT mode) ... config is
297 0x09, /* __u8 if_bLength; */
298 0x04, /* __u8 if_bDescriptorType; Interface */
299 0x00, /* __u8 if_bInterfaceNumber; */
300 0x00, /* __u8 if_bAlternateSetting; */
301 0x01, /* __u8 if_bNumEndpoints; */
302 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
303 0x00, /* __u8 if_bInterfaceSubClass; */
304 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
305 0x00, /* __u8 if_iInterface; */
307 /* one endpoint (status change endpoint) */
308 0x07, /* __u8 ep_bLength; */
309 0x05, /* __u8 ep_bDescriptorType; Endpoint */
310 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
311 0x03, /* __u8 ep_bmAttributes; Interrupt */
312 /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
313 * see hub.c:hub_configure() for details. */
314 (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
315 0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
318 static const u8 ss_rh_config_descriptor[] = {
319 /* one configuration */
320 0x09, /* __u8 bLength; */
321 0x02, /* __u8 bDescriptorType; Configuration */
322 0x1f, 0x00, /* __le16 wTotalLength; */
323 0x01, /* __u8 bNumInterfaces; (1) */
324 0x01, /* __u8 bConfigurationValue; */
325 0x00, /* __u8 iConfiguration; */
326 0xc0, /* __u8 bmAttributes;
331 0x00, /* __u8 MaxPower; */
334 0x09, /* __u8 if_bLength; */
335 0x04, /* __u8 if_bDescriptorType; Interface */
336 0x00, /* __u8 if_bInterfaceNumber; */
337 0x00, /* __u8 if_bAlternateSetting; */
338 0x01, /* __u8 if_bNumEndpoints; */
339 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
340 0x00, /* __u8 if_bInterfaceSubClass; */
341 0x00, /* __u8 if_bInterfaceProtocol; */
342 0x00, /* __u8 if_iInterface; */
344 /* one endpoint (status change endpoint) */
345 0x07, /* __u8 ep_bLength; */
346 0x05, /* __u8 ep_bDescriptorType; Endpoint */
347 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
348 0x03, /* __u8 ep_bmAttributes; Interrupt */
349 /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
350 * see hub.c:hub_configure() for details. */
351 (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
352 0x0c, /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
354 /* one SuperSpeed endpoint companion descriptor */
355 0x06, /* __u8 ss_bLength */
356 0x30, /* __u8 ss_bDescriptorType; SuperSpeed EP Companion */
357 0x00, /* __u8 ss_bMaxBurst; allows 1 TX between ACKs */
358 0x00, /* __u8 ss_bmAttributes; 1 packet per service interval */
359 0x02, 0x00 /* __le16 ss_wBytesPerInterval; 15 bits for max 15 ports */
362 /* authorized_default behaviour:
363 * -1 is authorized for all devices except wireless (old behaviour)
364 * 0 is unauthorized for all devices
365 * 1 is authorized for all devices
367 static int authorized_default = -1;
368 module_param(authorized_default, int, S_IRUGO|S_IWUSR);
369 MODULE_PARM_DESC(authorized_default,
370 "Default USB device authorization: 0 is not authorized, 1 is "
371 "authorized, -1 is authorized except for wireless USB (default, "
373 /*-------------------------------------------------------------------------*/
376 * ascii2desc() - Helper routine for producing UTF-16LE string descriptors
377 * @s: Null-terminated ASCII (actually ISO-8859-1) string
378 * @buf: Buffer for USB string descriptor (header + UTF-16LE)
379 * @len: Length (in bytes; may be odd) of descriptor buffer.
381 * Return: The number of bytes filled in: 2 + 2*strlen(s) or @len,
385 * USB String descriptors can contain at most 126 characters; input
386 * strings longer than that are truncated.
389 ascii2desc(char const *s, u8 *buf, unsigned len)
391 unsigned n, t = 2 + 2*strlen(s);
394 t = 254; /* Longest possible UTF string descriptor */
398 t += USB_DT_STRING << 8; /* Now t is first 16 bits to store */
406 t = (unsigned char)*s++;
412 * rh_string() - provides string descriptors for root hub
413 * @id: the string ID number (0: langids, 1: serial #, 2: product, 3: vendor)
414 * @hcd: the host controller for this root hub
415 * @data: buffer for output packet
416 * @len: length of the provided buffer
418 * Produces either a manufacturer, product or serial number string for the
419 * virtual root hub device.
421 * Return: The number of bytes filled in: the length of the descriptor or
422 * of the provided buffer, whichever is less.
425 rh_string(int id, struct usb_hcd const *hcd, u8 *data, unsigned len)
429 static char const langids[4] = {4, USB_DT_STRING, 0x09, 0x04};
434 /* Array of LANGID codes (0x0409 is MSFT-speak for "en-us") */
435 /* See http://www.usb.org/developers/docs/USB_LANGIDs.pdf */
438 memcpy(data, langids, len);
442 s = hcd->self.bus_name;
446 s = hcd->product_desc;
450 snprintf (buf, sizeof buf, "%s %s %s", init_utsname()->sysname,
451 init_utsname()->release, hcd->driver->description);
455 /* Can't happen; caller guarantees it */
459 return ascii2desc(s, data, len);
463 /* Root hub control transfers execute synchronously */
464 static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
466 struct usb_ctrlrequest *cmd;
467 u16 typeReq, wValue, wIndex, wLength;
468 u8 *ubuf = urb->transfer_buffer;
472 u8 patch_protocol = 0;
479 spin_lock_irq(&hcd_root_hub_lock);
480 status = usb_hcd_link_urb_to_ep(hcd, urb);
481 spin_unlock_irq(&hcd_root_hub_lock);
484 urb->hcpriv = hcd; /* Indicate it's queued */
486 cmd = (struct usb_ctrlrequest *) urb->setup_packet;
487 typeReq = (cmd->bRequestType << 8) | cmd->bRequest;
488 wValue = le16_to_cpu (cmd->wValue);
489 wIndex = le16_to_cpu (cmd->wIndex);
490 wLength = le16_to_cpu (cmd->wLength);
492 if (wLength > urb->transfer_buffer_length)
496 * tbuf should be at least as big as the
497 * USB hub descriptor.
499 tbuf_size = max_t(u16, sizeof(struct usb_hub_descriptor), wLength);
500 tbuf = kzalloc(tbuf_size, GFP_KERNEL);
507 urb->actual_length = 0;
510 /* DEVICE REQUESTS */
512 /* The root hub's remote wakeup enable bit is implemented using
513 * driver model wakeup flags. If this system supports wakeup
514 * through USB, userspace may change the default "allow wakeup"
515 * policy through sysfs or these calls.
517 * Most root hubs support wakeup from downstream devices, for
518 * runtime power management (disabling USB clocks and reducing
519 * VBUS power usage). However, not all of them do so; silicon,
520 * board, and BIOS bugs here are not uncommon, so these can't
521 * be treated quite like external hubs.
523 * Likewise, not all root hubs will pass wakeup events upstream,
524 * to wake up the whole system. So don't assume root hub and
525 * controller capabilities are identical.
528 case DeviceRequest | USB_REQ_GET_STATUS:
529 tbuf[0] = (device_may_wakeup(&hcd->self.root_hub->dev)
530 << USB_DEVICE_REMOTE_WAKEUP)
531 | (1 << USB_DEVICE_SELF_POWERED);
535 case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
536 if (wValue == USB_DEVICE_REMOTE_WAKEUP)
537 device_set_wakeup_enable(&hcd->self.root_hub->dev, 0);
541 case DeviceOutRequest | USB_REQ_SET_FEATURE:
542 if (device_can_wakeup(&hcd->self.root_hub->dev)
543 && wValue == USB_DEVICE_REMOTE_WAKEUP)
544 device_set_wakeup_enable(&hcd->self.root_hub->dev, 1);
548 case DeviceRequest | USB_REQ_GET_CONFIGURATION:
552 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
554 case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
555 switch (wValue & 0xff00) {
556 case USB_DT_DEVICE << 8:
557 switch (hcd->speed) {
559 bufp = usb3_rh_dev_descriptor;
562 bufp = usb25_rh_dev_descriptor;
565 bufp = usb2_rh_dev_descriptor;
568 bufp = usb11_rh_dev_descriptor;
577 case USB_DT_CONFIG << 8:
578 switch (hcd->speed) {
580 bufp = ss_rh_config_descriptor;
581 len = sizeof ss_rh_config_descriptor;
585 bufp = hs_rh_config_descriptor;
586 len = sizeof hs_rh_config_descriptor;
589 bufp = fs_rh_config_descriptor;
590 len = sizeof fs_rh_config_descriptor;
595 if (device_can_wakeup(&hcd->self.root_hub->dev))
598 case USB_DT_STRING << 8:
599 if ((wValue & 0xff) < 4)
600 urb->actual_length = rh_string(wValue & 0xff,
602 else /* unsupported IDs --> "protocol stall" */
605 case USB_DT_BOS << 8:
611 case DeviceRequest | USB_REQ_GET_INTERFACE:
615 case DeviceOutRequest | USB_REQ_SET_INTERFACE:
617 case DeviceOutRequest | USB_REQ_SET_ADDRESS:
618 /* wValue == urb->dev->devaddr */
619 dev_dbg (hcd->self.controller, "root hub device address %d\n",
623 /* INTERFACE REQUESTS (no defined feature/status flags) */
625 /* ENDPOINT REQUESTS */
627 case EndpointRequest | USB_REQ_GET_STATUS:
628 /* ENDPOINT_HALT flag */
633 case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
634 case EndpointOutRequest | USB_REQ_SET_FEATURE:
635 dev_dbg (hcd->self.controller, "no endpoint features yet\n");
638 /* CLASS REQUESTS (and errors) */
642 /* non-generic request */
648 case GetHubDescriptor:
649 len = sizeof (struct usb_hub_descriptor);
651 case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
652 /* len is returned by hub_control */
655 status = hcd->driver->hub_control (hcd,
656 typeReq, wValue, wIndex,
659 if (typeReq == GetHubDescriptor)
660 usb_hub_adjust_deviceremovable(hcd->self.root_hub,
661 (struct usb_hub_descriptor *)tbuf);
664 /* "protocol stall" on error */
670 if (status != -EPIPE) {
671 dev_dbg (hcd->self.controller,
672 "CTRL: TypeReq=0x%x val=0x%x "
673 "idx=0x%x len=%d ==> %d\n",
674 typeReq, wValue, wIndex,
677 } else if (status > 0) {
678 /* hub_control may return the length of data copied. */
683 if (urb->transfer_buffer_length < len)
684 len = urb->transfer_buffer_length;
685 urb->actual_length = len;
686 /* always USB_DIR_IN, toward host */
687 memcpy (ubuf, bufp, len);
689 /* report whether RH hardware supports remote wakeup */
691 len > offsetof (struct usb_config_descriptor,
693 ((struct usb_config_descriptor *)ubuf)->bmAttributes
694 |= USB_CONFIG_ATT_WAKEUP;
696 /* report whether RH hardware has an integrated TT */
697 if (patch_protocol &&
698 len > offsetof(struct usb_device_descriptor,
700 ((struct usb_device_descriptor *) ubuf)->
701 bDeviceProtocol = USB_HUB_PR_HS_SINGLE_TT;
706 /* any errors get returned through the urb completion */
707 spin_lock_irq(&hcd_root_hub_lock);
708 usb_hcd_unlink_urb_from_ep(hcd, urb);
709 usb_hcd_giveback_urb(hcd, urb, status);
710 spin_unlock_irq(&hcd_root_hub_lock);
714 /*-------------------------------------------------------------------------*/
717 * Root Hub interrupt transfers are polled using a timer if the
718 * driver requests it; otherwise the driver is responsible for
719 * calling usb_hcd_poll_rh_status() when an event occurs.
721 * Completions are called in_interrupt(), but they may or may not
724 void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
729 char buffer[6]; /* Any root hubs with > 31 ports? */
731 if (unlikely(!hcd->rh_pollable))
733 if (!hcd->uses_new_polling && !hcd->status_urb)
736 length = hcd->driver->hub_status_data(hcd, buffer);
739 /* try to complete the status urb */
740 spin_lock_irqsave(&hcd_root_hub_lock, flags);
741 urb = hcd->status_urb;
743 clear_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
744 hcd->status_urb = NULL;
745 urb->actual_length = length;
746 memcpy(urb->transfer_buffer, buffer, length);
748 usb_hcd_unlink_urb_from_ep(hcd, urb);
749 usb_hcd_giveback_urb(hcd, urb, 0);
752 set_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
754 spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
757 /* The USB 2.0 spec says 256 ms. This is close enough and won't
758 * exceed that limit if HZ is 100. The math is more clunky than
759 * maybe expected, this is to make sure that all timers for USB devices
760 * fire at the same time to give the CPU a break in between */
761 if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) :
762 (length == 0 && hcd->status_urb != NULL))
763 mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
765 EXPORT_SYMBOL_GPL(usb_hcd_poll_rh_status);
768 static void rh_timer_func (unsigned long _hcd)
770 usb_hcd_poll_rh_status((struct usb_hcd *) _hcd);
773 /*-------------------------------------------------------------------------*/
775 static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb)
779 unsigned len = 1 + (urb->dev->maxchild / 8);
781 spin_lock_irqsave (&hcd_root_hub_lock, flags);
782 if (hcd->status_urb || urb->transfer_buffer_length < len) {
783 dev_dbg (hcd->self.controller, "not queuing rh status urb\n");
788 retval = usb_hcd_link_urb_to_ep(hcd, urb);
792 hcd->status_urb = urb;
793 urb->hcpriv = hcd; /* indicate it's queued */
794 if (!hcd->uses_new_polling)
795 mod_timer(&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
797 /* If a status change has already occurred, report it ASAP */
798 else if (HCD_POLL_PENDING(hcd))
799 mod_timer(&hcd->rh_timer, jiffies);
802 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
806 static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb)
808 if (usb_endpoint_xfer_int(&urb->ep->desc))
809 return rh_queue_status (hcd, urb);
810 if (usb_endpoint_xfer_control(&urb->ep->desc))
811 return rh_call_control (hcd, urb);
815 /*-------------------------------------------------------------------------*/
817 /* Unlinks of root-hub control URBs are legal, but they don't do anything
818 * since these URBs always execute synchronously.
820 static int usb_rh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
825 spin_lock_irqsave(&hcd_root_hub_lock, flags);
826 rc = usb_hcd_check_unlink_urb(hcd, urb, status);
830 if (usb_endpoint_num(&urb->ep->desc) == 0) { /* Control URB */
833 } else { /* Status URB */
834 if (!hcd->uses_new_polling)
835 del_timer (&hcd->rh_timer);
836 if (urb == hcd->status_urb) {
837 hcd->status_urb = NULL;
838 usb_hcd_unlink_urb_from_ep(hcd, urb);
839 usb_hcd_giveback_urb(hcd, urb, status);
843 spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
850 * Show & store the current value of authorized_default
852 static ssize_t authorized_default_show(struct device *dev,
853 struct device_attribute *attr, char *buf)
855 struct usb_device *rh_usb_dev = to_usb_device(dev);
856 struct usb_bus *usb_bus = rh_usb_dev->bus;
857 struct usb_hcd *usb_hcd;
859 usb_hcd = bus_to_hcd(usb_bus);
860 return snprintf(buf, PAGE_SIZE, "%u\n", usb_hcd->authorized_default);
863 static ssize_t authorized_default_store(struct device *dev,
864 struct device_attribute *attr,
865 const char *buf, size_t size)
869 struct usb_device *rh_usb_dev = to_usb_device(dev);
870 struct usb_bus *usb_bus = rh_usb_dev->bus;
871 struct usb_hcd *usb_hcd;
873 usb_hcd = bus_to_hcd(usb_bus);
874 result = sscanf(buf, "%u\n", &val);
876 usb_hcd->authorized_default = val ? 1 : 0;
883 static DEVICE_ATTR_RW(authorized_default);
885 /* Group all the USB bus attributes */
886 static struct attribute *usb_bus_attrs[] = {
887 &dev_attr_authorized_default.attr,
891 static struct attribute_group usb_bus_attr_group = {
892 .name = NULL, /* we want them in the same directory */
893 .attrs = usb_bus_attrs,
898 /*-------------------------------------------------------------------------*/
901 * usb_bus_init - shared initialization code
902 * @bus: the bus structure being initialized
904 * This code is used to initialize a usb_bus structure, memory for which is
905 * separately managed.
907 static void usb_bus_init (struct usb_bus *bus)
909 memset (&bus->devmap, 0, sizeof(struct usb_devmap));
911 bus->devnum_next = 1;
913 bus->root_hub = NULL;
915 bus->bandwidth_allocated = 0;
916 bus->bandwidth_int_reqs = 0;
917 bus->bandwidth_isoc_reqs = 0;
918 mutex_init(&bus->usb_address0_mutex);
920 INIT_LIST_HEAD (&bus->bus_list);
923 /*-------------------------------------------------------------------------*/
926 * usb_register_bus - registers the USB host controller with the usb core
927 * @bus: pointer to the bus to register
928 * Context: !in_interrupt()
930 * Assigns a bus number, and links the controller into usbcore data
931 * structures so that it can be seen by scanning the bus list.
933 * Return: 0 if successful. A negative error code otherwise.
935 static int usb_register_bus(struct usb_bus *bus)
940 mutex_lock(&usb_bus_list_lock);
941 busnum = find_next_zero_bit(busmap, USB_MAXBUS, 1);
942 if (busnum >= USB_MAXBUS) {
943 printk (KERN_ERR "%s: too many buses\n", usbcore_name);
944 goto error_find_busnum;
946 set_bit(busnum, busmap);
947 bus->busnum = busnum;
949 /* Add it to the local list of buses */
950 list_add (&bus->bus_list, &usb_bus_list);
951 mutex_unlock(&usb_bus_list_lock);
953 usb_notify_add_bus(bus);
955 dev_info (bus->controller, "new USB bus registered, assigned bus "
956 "number %d\n", bus->busnum);
960 mutex_unlock(&usb_bus_list_lock);
965 * usb_deregister_bus - deregisters the USB host controller
966 * @bus: pointer to the bus to deregister
967 * Context: !in_interrupt()
969 * Recycles the bus number, and unlinks the controller from usbcore data
970 * structures so that it won't be seen by scanning the bus list.
972 static void usb_deregister_bus (struct usb_bus *bus)
974 dev_info (bus->controller, "USB bus %d deregistered\n", bus->busnum);
977 * NOTE: make sure that all the devices are removed by the
978 * controller code, as well as having it call this when cleaning
981 mutex_lock(&usb_bus_list_lock);
982 list_del (&bus->bus_list);
983 mutex_unlock(&usb_bus_list_lock);
985 usb_notify_remove_bus(bus);
987 clear_bit(bus->busnum, busmap);
991 * register_root_hub - called by usb_add_hcd() to register a root hub
992 * @hcd: host controller for this root hub
994 * This function registers the root hub with the USB subsystem. It sets up
995 * the device properly in the device tree and then calls usb_new_device()
996 * to register the usb device. It also assigns the root hub's USB address
999 * Return: 0 if successful. A negative error code otherwise.
1001 static int register_root_hub(struct usb_hcd *hcd)
1003 struct device *parent_dev = hcd->self.controller;
1004 struct usb_device *usb_dev = hcd->self.root_hub;
1005 const int devnum = 1;
1008 usb_dev->devnum = devnum;
1009 usb_dev->bus->devnum_next = devnum + 1;
1010 memset (&usb_dev->bus->devmap.devicemap, 0,
1011 sizeof usb_dev->bus->devmap.devicemap);
1012 set_bit (devnum, usb_dev->bus->devmap.devicemap);
1013 usb_set_device_state(usb_dev, USB_STATE_ADDRESS);
1015 mutex_lock(&usb_bus_list_lock);
1017 usb_dev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
1018 retval = usb_get_device_descriptor(usb_dev, USB_DT_DEVICE_SIZE);
1019 if (retval != sizeof usb_dev->descriptor) {
1020 mutex_unlock(&usb_bus_list_lock);
1021 dev_dbg (parent_dev, "can't read %s device descriptor %d\n",
1022 dev_name(&usb_dev->dev), retval);
1023 return (retval < 0) ? retval : -EMSGSIZE;
1026 if (le16_to_cpu(usb_dev->descriptor.bcdUSB) >= 0x0201) {
1027 retval = usb_get_bos_descriptor(usb_dev);
1029 usb_dev->lpm_capable = usb_device_supports_lpm(usb_dev);
1030 } else if (usb_dev->speed == USB_SPEED_SUPER) {
1031 mutex_unlock(&usb_bus_list_lock);
1032 dev_dbg(parent_dev, "can't read %s bos descriptor %d\n",
1033 dev_name(&usb_dev->dev), retval);
1038 retval = usb_new_device (usb_dev);
1040 dev_err (parent_dev, "can't register root hub for %s, %d\n",
1041 dev_name(&usb_dev->dev), retval);
1043 spin_lock_irq (&hcd_root_hub_lock);
1044 hcd->rh_registered = 1;
1045 spin_unlock_irq (&hcd_root_hub_lock);
1047 /* Did the HC die before the root hub was registered? */
1049 usb_hc_died (hcd); /* This time clean up */
1051 mutex_unlock(&usb_bus_list_lock);
1057 * usb_hcd_start_port_resume - a root-hub port is sending a resume signal
1058 * @bus: the bus which the root hub belongs to
1059 * @portnum: the port which is being resumed
1061 * HCDs should call this function when they know that a resume signal is
1062 * being sent to a root-hub port. The root hub will be prevented from
1063 * going into autosuspend until usb_hcd_end_port_resume() is called.
1065 * The bus's private lock must be held by the caller.
1067 void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum)
1069 unsigned bit = 1 << portnum;
1071 if (!(bus->resuming_ports & bit)) {
1072 bus->resuming_ports |= bit;
1073 pm_runtime_get_noresume(&bus->root_hub->dev);
1076 EXPORT_SYMBOL_GPL(usb_hcd_start_port_resume);
1079 * usb_hcd_end_port_resume - a root-hub port has stopped sending a resume signal
1080 * @bus: the bus which the root hub belongs to
1081 * @portnum: the port which is being resumed
1083 * HCDs should call this function when they know that a resume signal has
1084 * stopped being sent to a root-hub port. The root hub will be allowed to
1085 * autosuspend again.
1087 * The bus's private lock must be held by the caller.
1089 void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum)
1091 unsigned bit = 1 << portnum;
1093 if (bus->resuming_ports & bit) {
1094 bus->resuming_ports &= ~bit;
1095 pm_runtime_put_noidle(&bus->root_hub->dev);
1098 EXPORT_SYMBOL_GPL(usb_hcd_end_port_resume);
1100 /*-------------------------------------------------------------------------*/
1103 * usb_calc_bus_time - approximate periodic transaction time in nanoseconds
1104 * @speed: from dev->speed; USB_SPEED_{LOW,FULL,HIGH}
1105 * @is_input: true iff the transaction sends data to the host
1106 * @isoc: true for isochronous transactions, false for interrupt ones
1107 * @bytecount: how many bytes in the transaction.
1109 * Return: Approximate bus time in nanoseconds for a periodic transaction.
1112 * See USB 2.0 spec section 5.11.3; only periodic transfers need to be
1113 * scheduled in software, this function is only used for such scheduling.
1115 long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount)
1120 case USB_SPEED_LOW: /* INTR only */
1122 tmp = (67667L * (31L + 10L * BitTime (bytecount))) / 1000L;
1123 return 64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
1125 tmp = (66700L * (31L + 10L * BitTime (bytecount))) / 1000L;
1126 return 64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
1128 case USB_SPEED_FULL: /* ISOC or INTR */
1130 tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
1131 return ((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp;
1133 tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
1134 return 9107L + BW_HOST_DELAY + tmp;
1136 case USB_SPEED_HIGH: /* ISOC or INTR */
1137 /* FIXME adjust for input vs output */
1139 tmp = HS_NSECS_ISO (bytecount);
1141 tmp = HS_NSECS (bytecount);
1144 pr_debug ("%s: bogus device speed!\n", usbcore_name);
1148 EXPORT_SYMBOL_GPL(usb_calc_bus_time);
1151 /*-------------------------------------------------------------------------*/
1154 * Generic HC operations.
1157 /*-------------------------------------------------------------------------*/
1160 * usb_hcd_link_urb_to_ep - add an URB to its endpoint queue
1161 * @hcd: host controller to which @urb was submitted
1162 * @urb: URB being submitted
1164 * Host controller drivers should call this routine in their enqueue()
1165 * method. The HCD's private spinlock must be held and interrupts must
1166 * be disabled. The actions carried out here are required for URB
1167 * submission, as well as for endpoint shutdown and for usb_kill_urb.
1169 * Return: 0 for no error, otherwise a negative error code (in which case
1170 * the enqueue() method must fail). If no error occurs but enqueue() fails
1171 * anyway, it must call usb_hcd_unlink_urb_from_ep() before releasing
1172 * the private spinlock and returning.
1174 int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb)
1178 spin_lock(&hcd_urb_list_lock);
1180 /* Check that the URB isn't being killed */
1181 if (unlikely(atomic_read(&urb->reject))) {
1186 if (unlikely(!urb->ep->enabled)) {
1191 if (unlikely(!urb->dev->can_submit)) {
1197 * Check the host controller's state and add the URB to the
1200 if (HCD_RH_RUNNING(hcd)) {
1202 list_add_tail(&urb->urb_list, &urb->ep->urb_list);
1208 spin_unlock(&hcd_urb_list_lock);
1211 EXPORT_SYMBOL_GPL(usb_hcd_link_urb_to_ep);
1214 * usb_hcd_check_unlink_urb - check whether an URB may be unlinked
1215 * @hcd: host controller to which @urb was submitted
1216 * @urb: URB being checked for unlinkability
1217 * @status: error code to store in @urb if the unlink succeeds
1219 * Host controller drivers should call this routine in their dequeue()
1220 * method. The HCD's private spinlock must be held and interrupts must
1221 * be disabled. The actions carried out here are required for making
1222 * sure than an unlink is valid.
1224 * Return: 0 for no error, otherwise a negative error code (in which case
1225 * the dequeue() method must fail). The possible error codes are:
1227 * -EIDRM: @urb was not submitted or has already completed.
1228 * The completion function may not have been called yet.
1230 * -EBUSY: @urb has already been unlinked.
1232 int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
1235 struct list_head *tmp;
1237 /* insist the urb is still queued */
1238 list_for_each(tmp, &urb->ep->urb_list) {
1239 if (tmp == &urb->urb_list)
1242 if (tmp != &urb->urb_list)
1245 /* Any status except -EINPROGRESS means something already started to
1246 * unlink this URB from the hardware. So there's no more work to do.
1250 urb->unlinked = status;
1253 EXPORT_SYMBOL_GPL(usb_hcd_check_unlink_urb);
1256 * usb_hcd_unlink_urb_from_ep - remove an URB from its endpoint queue
1257 * @hcd: host controller to which @urb was submitted
1258 * @urb: URB being unlinked
1260 * Host controller drivers should call this routine before calling
1261 * usb_hcd_giveback_urb(). The HCD's private spinlock must be held and
1262 * interrupts must be disabled. The actions carried out here are required
1263 * for URB completion.
1265 void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb)
1267 /* clear all state linking urb to this dev (and hcd) */
1268 spin_lock(&hcd_urb_list_lock);
1269 list_del_init(&urb->urb_list);
1270 spin_unlock(&hcd_urb_list_lock);
1272 EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep);
1275 * Some usb host controllers can only perform dma using a small SRAM area.
1276 * The usb core itself is however optimized for host controllers that can dma
1277 * using regular system memory - like pci devices doing bus mastering.
1279 * To support host controllers with limited dma capabilities we provide dma
1280 * bounce buffers. This feature can be enabled using the HCD_LOCAL_MEM flag.
1281 * For this to work properly the host controller code must first use the
1282 * function dma_declare_coherent_memory() to point out which memory area
1283 * that should be used for dma allocations.
1285 * The HCD_LOCAL_MEM flag then tells the usb code to allocate all data for
1286 * dma using dma_alloc_coherent() which in turn allocates from the memory
1287 * area pointed out with dma_declare_coherent_memory().
1289 * So, to summarize...
1291 * - We need "local" memory, canonical example being
1292 * a small SRAM on a discrete controller being the
1293 * only memory that the controller can read ...
1294 * (a) "normal" kernel memory is no good, and
1295 * (b) there's not enough to share
1297 * - The only *portable* hook for such stuff in the
1298 * DMA framework is dma_declare_coherent_memory()
1300 * - So we use that, even though the primary requirement
1301 * is that the memory be "local" (hence addressable
1302 * by that device), not "coherent".
1306 static int hcd_alloc_coherent(struct usb_bus *bus,
1307 gfp_t mem_flags, dma_addr_t *dma_handle,
1308 void **vaddr_handle, size_t size,
1309 enum dma_data_direction dir)
1311 unsigned char *vaddr;
1313 if (*vaddr_handle == NULL) {
1318 vaddr = hcd_buffer_alloc(bus, size + sizeof(vaddr),
1319 mem_flags, dma_handle);
1324 * Store the virtual address of the buffer at the end
1325 * of the allocated dma buffer. The size of the buffer
1326 * may be uneven so use unaligned functions instead
1327 * of just rounding up. It makes sense to optimize for
1328 * memory footprint over access speed since the amount
1329 * of memory available for dma may be limited.
1331 put_unaligned((unsigned long)*vaddr_handle,
1332 (unsigned long *)(vaddr + size));
1334 if (dir == DMA_TO_DEVICE)
1335 memcpy(vaddr, *vaddr_handle, size);
1337 *vaddr_handle = vaddr;
1341 static void hcd_free_coherent(struct usb_bus *bus, dma_addr_t *dma_handle,
1342 void **vaddr_handle, size_t size,
1343 enum dma_data_direction dir)
1345 unsigned char *vaddr = *vaddr_handle;
1347 vaddr = (void *)get_unaligned((unsigned long *)(vaddr + size));
1349 if (dir == DMA_FROM_DEVICE)
1350 memcpy(vaddr, *vaddr_handle, size);
1352 hcd_buffer_free(bus, size + sizeof(vaddr), *vaddr_handle, *dma_handle);
1354 *vaddr_handle = vaddr;
1358 void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *hcd, struct urb *urb)
1360 if (urb->transfer_flags & URB_SETUP_MAP_SINGLE)
1361 dma_unmap_single(hcd->self.controller,
1363 sizeof(struct usb_ctrlrequest),
1365 else if (urb->transfer_flags & URB_SETUP_MAP_LOCAL)
1366 hcd_free_coherent(urb->dev->bus,
1368 (void **) &urb->setup_packet,
1369 sizeof(struct usb_ctrlrequest),
1372 /* Make it safe to call this routine more than once */
1373 urb->transfer_flags &= ~(URB_SETUP_MAP_SINGLE | URB_SETUP_MAP_LOCAL);
1375 EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_setup_for_dma);
1377 static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
1379 if (hcd->driver->unmap_urb_for_dma)
1380 hcd->driver->unmap_urb_for_dma(hcd, urb);
1382 usb_hcd_unmap_urb_for_dma(hcd, urb);
1385 void usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
1387 enum dma_data_direction dir;
1389 usb_hcd_unmap_urb_setup_for_dma(hcd, urb);
1391 dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
1392 if (urb->transfer_flags & URB_DMA_MAP_SG)
1393 dma_unmap_sg(hcd->self.controller,
1397 else if (urb->transfer_flags & URB_DMA_MAP_PAGE)
1398 dma_unmap_page(hcd->self.controller,
1400 urb->transfer_buffer_length,
1402 else if (urb->transfer_flags & URB_DMA_MAP_SINGLE)
1403 dma_unmap_single(hcd->self.controller,
1405 urb->transfer_buffer_length,
1407 else if (urb->transfer_flags & URB_MAP_LOCAL)
1408 hcd_free_coherent(urb->dev->bus,
1410 &urb->transfer_buffer,
1411 urb->transfer_buffer_length,
1414 /* Make it safe to call this routine more than once */
1415 urb->transfer_flags &= ~(URB_DMA_MAP_SG | URB_DMA_MAP_PAGE |
1416 URB_DMA_MAP_SINGLE | URB_MAP_LOCAL);
1418 EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_for_dma);
1420 static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
1423 if (hcd->driver->map_urb_for_dma)
1424 return hcd->driver->map_urb_for_dma(hcd, urb, mem_flags);
1426 return usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
1429 int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
1432 enum dma_data_direction dir;
1435 /* Map the URB's buffers for DMA access.
1436 * Lower level HCD code should use *_dma exclusively,
1437 * unless it uses pio or talks to another transport,
1438 * or uses the provided scatter gather list for bulk.
1441 if (usb_endpoint_xfer_control(&urb->ep->desc)) {
1442 if (hcd->self.uses_pio_for_control)
1444 if (hcd->self.uses_dma) {
1445 urb->setup_dma = dma_map_single(
1446 hcd->self.controller,
1448 sizeof(struct usb_ctrlrequest),
1450 if (dma_mapping_error(hcd->self.controller,
1453 urb->transfer_flags |= URB_SETUP_MAP_SINGLE;
1454 } else if (hcd->driver->flags & HCD_LOCAL_MEM) {
1455 ret = hcd_alloc_coherent(
1456 urb->dev->bus, mem_flags,
1458 (void **)&urb->setup_packet,
1459 sizeof(struct usb_ctrlrequest),
1463 urb->transfer_flags |= URB_SETUP_MAP_LOCAL;
1467 dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
1468 if (urb->transfer_buffer_length != 0
1469 && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
1470 if (hcd->self.uses_dma) {
1474 /* We don't support sg for isoc transfers ! */
1475 if (usb_endpoint_xfer_isoc(&urb->ep->desc)) {
1481 hcd->self.controller,
1488 urb->transfer_flags |= URB_DMA_MAP_SG;
1489 urb->num_mapped_sgs = n;
1490 if (n != urb->num_sgs)
1491 urb->transfer_flags |=
1492 URB_DMA_SG_COMBINED;
1493 } else if (urb->sg) {
1494 struct scatterlist *sg = urb->sg;
1495 urb->transfer_dma = dma_map_page(
1496 hcd->self.controller,
1499 urb->transfer_buffer_length,
1501 if (dma_mapping_error(hcd->self.controller,
1505 urb->transfer_flags |= URB_DMA_MAP_PAGE;
1506 } else if (is_vmalloc_addr(urb->transfer_buffer)) {
1507 WARN_ONCE(1, "transfer buffer not dma capable\n");
1510 urb->transfer_dma = dma_map_single(
1511 hcd->self.controller,
1512 urb->transfer_buffer,
1513 urb->transfer_buffer_length,
1515 if (dma_mapping_error(hcd->self.controller,
1519 urb->transfer_flags |= URB_DMA_MAP_SINGLE;
1521 } else if (hcd->driver->flags & HCD_LOCAL_MEM) {
1522 ret = hcd_alloc_coherent(
1523 urb->dev->bus, mem_flags,
1525 &urb->transfer_buffer,
1526 urb->transfer_buffer_length,
1529 urb->transfer_flags |= URB_MAP_LOCAL;
1531 if (ret && (urb->transfer_flags & (URB_SETUP_MAP_SINGLE |
1532 URB_SETUP_MAP_LOCAL)))
1533 usb_hcd_unmap_urb_for_dma(hcd, urb);
1537 EXPORT_SYMBOL_GPL(usb_hcd_map_urb_for_dma);
1539 /*-------------------------------------------------------------------------*/
1541 /* may be called in any context with a valid urb->dev usecount
1542 * caller surrenders "ownership" of urb
1543 * expects usb_submit_urb() to have sanity checked and conditioned all
1546 int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
1549 struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
1551 /* increment urb's reference count as part of giving it to the HCD
1552 * (which will control it). HCD guarantees that it either returns
1553 * an error or calls giveback(), but not both.
1556 atomic_inc(&urb->use_count);
1557 atomic_inc(&urb->dev->urbnum);
1558 usbmon_urb_submit(&hcd->self, urb);
1560 /* NOTE requirements on root-hub callers (usbfs and the hub
1561 * driver, for now): URBs' urb->transfer_buffer must be
1562 * valid and usb_buffer_{sync,unmap}() not be needed, since
1563 * they could clobber root hub response data. Also, control
1564 * URBs must be submitted in process context with interrupts
1568 if (is_root_hub(urb->dev)) {
1569 status = rh_urb_enqueue(hcd, urb);
1571 status = map_urb_for_dma(hcd, urb, mem_flags);
1572 if (likely(status == 0)) {
1573 status = hcd->driver->urb_enqueue(hcd, urb, mem_flags);
1574 if (unlikely(status))
1575 unmap_urb_for_dma(hcd, urb);
1579 if (unlikely(status)) {
1580 usbmon_urb_submit_error(&hcd->self, urb, status);
1582 INIT_LIST_HEAD(&urb->urb_list);
1583 atomic_dec(&urb->use_count);
1584 atomic_dec(&urb->dev->urbnum);
1585 if (atomic_read(&urb->reject))
1586 wake_up(&usb_kill_urb_queue);
1592 /*-------------------------------------------------------------------------*/
1594 /* this makes the hcd giveback() the urb more quickly, by kicking it
1595 * off hardware queues (which may take a while) and returning it as
1596 * soon as practical. we've already set up the urb's return status,
1597 * but we can't know if the callback completed already.
1599 static int unlink1(struct usb_hcd *hcd, struct urb *urb, int status)
1603 if (is_root_hub(urb->dev))
1604 value = usb_rh_urb_dequeue(hcd, urb, status);
1607 /* The only reason an HCD might fail this call is if
1608 * it has not yet fully queued the urb to begin with.
1609 * Such failures should be harmless. */
1610 value = hcd->driver->urb_dequeue(hcd, urb, status);
1616 * called in any context
1618 * caller guarantees urb won't be recycled till both unlink()
1619 * and the urb's completion function return
1621 int usb_hcd_unlink_urb (struct urb *urb, int status)
1623 struct usb_hcd *hcd;
1624 struct usb_device *udev = urb->dev;
1625 int retval = -EIDRM;
1626 unsigned long flags;
1628 /* Prevent the device and bus from going away while
1629 * the unlink is carried out. If they are already gone
1630 * then urb->use_count must be 0, since disconnected
1631 * devices can't have any active URBs.
1633 spin_lock_irqsave(&hcd_urb_unlink_lock, flags);
1634 if (atomic_read(&urb->use_count) > 0) {
1638 spin_unlock_irqrestore(&hcd_urb_unlink_lock, flags);
1640 hcd = bus_to_hcd(urb->dev->bus);
1641 retval = unlink1(hcd, urb, status);
1643 retval = -EINPROGRESS;
1644 else if (retval != -EIDRM && retval != -EBUSY)
1645 dev_dbg(&udev->dev, "hcd_unlink_urb %p fail %d\n",
1652 /*-------------------------------------------------------------------------*/
1654 static void __usb_hcd_giveback_urb(struct urb *urb)
1656 struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
1657 struct usb_anchor *anchor = urb->anchor;
1658 int status = urb->unlinked;
1659 unsigned long flags;
1662 if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) &&
1663 urb->actual_length < urb->transfer_buffer_length &&
1665 status = -EREMOTEIO;
1667 unmap_urb_for_dma(hcd, urb);
1668 usbmon_urb_complete(&hcd->self, urb, status);
1669 usb_anchor_suspend_wakeups(anchor);
1670 usb_unanchor_urb(urb);
1671 if (likely(status == 0))
1672 usb_led_activity(USB_LED_EVENT_HOST);
1674 /* pass ownership to the completion handler */
1675 urb->status = status;
1678 * We disable local IRQs here avoid possible deadlock because
1679 * drivers may call spin_lock() to hold lock which might be
1680 * acquired in one hard interrupt handler.
1682 * The local_irq_save()/local_irq_restore() around complete()
1683 * will be removed if current USB drivers have been cleaned up
1684 * and no one may trigger the above deadlock situation when
1685 * running complete() in tasklet.
1687 local_irq_save(flags);
1689 local_irq_restore(flags);
1691 usb_anchor_resume_wakeups(anchor);
1692 atomic_dec(&urb->use_count);
1693 if (unlikely(atomic_read(&urb->reject)))
1694 wake_up(&usb_kill_urb_queue);
1698 static void usb_giveback_urb_bh(unsigned long param)
1700 struct giveback_urb_bh *bh = (struct giveback_urb_bh *)param;
1701 struct list_head local_list;
1703 spin_lock_irq(&bh->lock);
1706 list_replace_init(&bh->head, &local_list);
1707 spin_unlock_irq(&bh->lock);
1709 while (!list_empty(&local_list)) {
1712 urb = list_entry(local_list.next, struct urb, urb_list);
1713 list_del_init(&urb->urb_list);
1714 bh->completing_ep = urb->ep;
1715 __usb_hcd_giveback_urb(urb);
1716 bh->completing_ep = NULL;
1719 /* check if there are new URBs to giveback */
1720 spin_lock_irq(&bh->lock);
1721 if (!list_empty(&bh->head))
1723 bh->running = false;
1724 spin_unlock_irq(&bh->lock);
1728 * usb_hcd_giveback_urb - return URB from HCD to device driver
1729 * @hcd: host controller returning the URB
1730 * @urb: urb being returned to the USB device driver.
1731 * @status: completion status code for the URB.
1732 * Context: in_interrupt()
1734 * This hands the URB from HCD to its USB device driver, using its
1735 * completion function. The HCD has freed all per-urb resources
1736 * (and is done using urb->hcpriv). It also released all HCD locks;
1737 * the device driver won't cause problems if it frees, modifies,
1738 * or resubmits this URB.
1740 * If @urb was unlinked, the value of @status will be overridden by
1741 * @urb->unlinked. Erroneous short transfers are detected in case
1742 * the HCD hasn't checked for them.
1744 void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status)
1746 struct giveback_urb_bh *bh;
1747 bool running, high_prio_bh;
1749 /* pass status to tasklet via unlinked */
1750 if (likely(!urb->unlinked))
1751 urb->unlinked = status;
1753 if (!hcd_giveback_urb_in_bh(hcd) && !is_root_hub(urb->dev)) {
1754 __usb_hcd_giveback_urb(urb);
1758 if (usb_pipeisoc(urb->pipe) || usb_pipeint(urb->pipe)) {
1759 bh = &hcd->high_prio_bh;
1760 high_prio_bh = true;
1762 bh = &hcd->low_prio_bh;
1763 high_prio_bh = false;
1766 spin_lock(&bh->lock);
1767 list_add_tail(&urb->urb_list, &bh->head);
1768 running = bh->running;
1769 spin_unlock(&bh->lock);
1773 else if (high_prio_bh)
1774 tasklet_hi_schedule(&bh->bh);
1776 tasklet_schedule(&bh->bh);
1778 EXPORT_SYMBOL_GPL(usb_hcd_giveback_urb);
1780 /*-------------------------------------------------------------------------*/
1782 /* Cancel all URBs pending on this endpoint and wait for the endpoint's
1783 * queue to drain completely. The caller must first insure that no more
1784 * URBs can be submitted for this endpoint.
1786 void usb_hcd_flush_endpoint(struct usb_device *udev,
1787 struct usb_host_endpoint *ep)
1789 struct usb_hcd *hcd;
1795 hcd = bus_to_hcd(udev->bus);
1797 /* No more submits can occur */
1798 spin_lock_irq(&hcd_urb_list_lock);
1800 list_for_each_entry (urb, &ep->urb_list, urb_list) {
1806 is_in = usb_urb_dir_in(urb);
1807 spin_unlock(&hcd_urb_list_lock);
1810 unlink1(hcd, urb, -ESHUTDOWN);
1811 dev_dbg (hcd->self.controller,
1812 "shutdown urb %p ep%d%s%s\n",
1813 urb, usb_endpoint_num(&ep->desc),
1814 is_in ? "in" : "out",
1817 switch (usb_endpoint_type(&ep->desc)) {
1818 case USB_ENDPOINT_XFER_CONTROL:
1820 case USB_ENDPOINT_XFER_BULK:
1822 case USB_ENDPOINT_XFER_INT:
1831 /* list contents may have changed */
1832 spin_lock(&hcd_urb_list_lock);
1835 spin_unlock_irq(&hcd_urb_list_lock);
1837 /* Wait until the endpoint queue is completely empty */
1838 while (!list_empty (&ep->urb_list)) {
1839 spin_lock_irq(&hcd_urb_list_lock);
1841 /* The list may have changed while we acquired the spinlock */
1843 if (!list_empty (&ep->urb_list)) {
1844 urb = list_entry (ep->urb_list.prev, struct urb,
1848 spin_unlock_irq(&hcd_urb_list_lock);
1858 * usb_hcd_alloc_bandwidth - check whether a new bandwidth setting exceeds
1860 * @udev: target &usb_device
1861 * @new_config: new configuration to install
1862 * @cur_alt: the current alternate interface setting
1863 * @new_alt: alternate interface setting that is being installed
1865 * To change configurations, pass in the new configuration in new_config,
1866 * and pass NULL for cur_alt and new_alt.
1868 * To reset a device's configuration (put the device in the ADDRESSED state),
1869 * pass in NULL for new_config, cur_alt, and new_alt.
1871 * To change alternate interface settings, pass in NULL for new_config,
1872 * pass in the current alternate interface setting in cur_alt,
1873 * and pass in the new alternate interface setting in new_alt.
1875 * Return: An error if the requested bandwidth change exceeds the
1876 * bus bandwidth or host controller internal resources.
1878 int usb_hcd_alloc_bandwidth(struct usb_device *udev,
1879 struct usb_host_config *new_config,
1880 struct usb_host_interface *cur_alt,
1881 struct usb_host_interface *new_alt)
1883 int num_intfs, i, j;
1884 struct usb_host_interface *alt = NULL;
1886 struct usb_hcd *hcd;
1887 struct usb_host_endpoint *ep;
1889 hcd = bus_to_hcd(udev->bus);
1890 if (!hcd->driver->check_bandwidth)
1893 /* Configuration is being removed - set configuration 0 */
1894 if (!new_config && !cur_alt) {
1895 for (i = 1; i < 16; ++i) {
1896 ep = udev->ep_out[i];
1898 hcd->driver->drop_endpoint(hcd, udev, ep);
1899 ep = udev->ep_in[i];
1901 hcd->driver->drop_endpoint(hcd, udev, ep);
1903 hcd->driver->check_bandwidth(hcd, udev);
1906 /* Check if the HCD says there's enough bandwidth. Enable all endpoints
1907 * each interface's alt setting 0 and ask the HCD to check the bandwidth
1908 * of the bus. There will always be bandwidth for endpoint 0, so it's
1912 num_intfs = new_config->desc.bNumInterfaces;
1913 /* Remove endpoints (except endpoint 0, which is always on the
1914 * schedule) from the old config from the schedule
1916 for (i = 1; i < 16; ++i) {
1917 ep = udev->ep_out[i];
1919 ret = hcd->driver->drop_endpoint(hcd, udev, ep);
1923 ep = udev->ep_in[i];
1925 ret = hcd->driver->drop_endpoint(hcd, udev, ep);
1930 for (i = 0; i < num_intfs; ++i) {
1931 struct usb_host_interface *first_alt;
1934 first_alt = &new_config->intf_cache[i]->altsetting[0];
1935 iface_num = first_alt->desc.bInterfaceNumber;
1936 /* Set up endpoints for alternate interface setting 0 */
1937 alt = usb_find_alt_setting(new_config, iface_num, 0);
1939 /* No alt setting 0? Pick the first setting. */
1942 for (j = 0; j < alt->desc.bNumEndpoints; j++) {
1943 ret = hcd->driver->add_endpoint(hcd, udev, &alt->endpoint[j]);
1949 if (cur_alt && new_alt) {
1950 struct usb_interface *iface = usb_ifnum_to_if(udev,
1951 cur_alt->desc.bInterfaceNumber);
1955 if (iface->resetting_device) {
1957 * The USB core just reset the device, so the xHCI host
1958 * and the device will think alt setting 0 is installed.
1959 * However, the USB core will pass in the alternate
1960 * setting installed before the reset as cur_alt. Dig
1961 * out the alternate setting 0 structure, or the first
1962 * alternate setting if a broken device doesn't have alt
1965 cur_alt = usb_altnum_to_altsetting(iface, 0);
1967 cur_alt = &iface->altsetting[0];
1970 /* Drop all the endpoints in the current alt setting */
1971 for (i = 0; i < cur_alt->desc.bNumEndpoints; i++) {
1972 ret = hcd->driver->drop_endpoint(hcd, udev,
1973 &cur_alt->endpoint[i]);
1977 /* Add all the endpoints in the new alt setting */
1978 for (i = 0; i < new_alt->desc.bNumEndpoints; i++) {
1979 ret = hcd->driver->add_endpoint(hcd, udev,
1980 &new_alt->endpoint[i]);
1985 ret = hcd->driver->check_bandwidth(hcd, udev);
1988 hcd->driver->reset_bandwidth(hcd, udev);
1992 /* Disables the endpoint: synchronizes with the hcd to make sure all
1993 * endpoint state is gone from hardware. usb_hcd_flush_endpoint() must
1994 * have been called previously. Use for set_configuration, set_interface,
1995 * driver removal, physical disconnect.
1997 * example: a qh stored in ep->hcpriv, holding state related to endpoint
1998 * type, maxpacket size, toggle, halt status, and scheduling.
2000 void usb_hcd_disable_endpoint(struct usb_device *udev,
2001 struct usb_host_endpoint *ep)
2003 struct usb_hcd *hcd;
2006 hcd = bus_to_hcd(udev->bus);
2007 if (hcd->driver->endpoint_disable)
2008 hcd->driver->endpoint_disable(hcd, ep);
2012 * usb_hcd_reset_endpoint - reset host endpoint state
2013 * @udev: USB device.
2014 * @ep: the endpoint to reset.
2016 * Resets any host endpoint state such as the toggle bit, sequence
2017 * number and current window.
2019 void usb_hcd_reset_endpoint(struct usb_device *udev,
2020 struct usb_host_endpoint *ep)
2022 struct usb_hcd *hcd = bus_to_hcd(udev->bus);
2024 if (hcd->driver->endpoint_reset)
2025 hcd->driver->endpoint_reset(hcd, ep);
2027 int epnum = usb_endpoint_num(&ep->desc);
2028 int is_out = usb_endpoint_dir_out(&ep->desc);
2029 int is_control = usb_endpoint_xfer_control(&ep->desc);
2031 usb_settoggle(udev, epnum, is_out, 0);
2033 usb_settoggle(udev, epnum, !is_out, 0);
2038 * usb_alloc_streams - allocate bulk endpoint stream IDs.
2039 * @interface: alternate setting that includes all endpoints.
2040 * @eps: array of endpoints that need streams.
2041 * @num_eps: number of endpoints in the array.
2042 * @num_streams: number of streams to allocate.
2043 * @mem_flags: flags hcd should use to allocate memory.
2045 * Sets up a group of bulk endpoints to have @num_streams stream IDs available.
2046 * Drivers may queue multiple transfers to different stream IDs, which may
2047 * complete in a different order than they were queued.
2049 * Return: On success, the number of allocated streams. On failure, a negative
2052 int usb_alloc_streams(struct usb_interface *interface,
2053 struct usb_host_endpoint **eps, unsigned int num_eps,
2054 unsigned int num_streams, gfp_t mem_flags)
2056 struct usb_hcd *hcd;
2057 struct usb_device *dev;
2060 dev = interface_to_usbdev(interface);
2061 hcd = bus_to_hcd(dev->bus);
2062 if (!hcd->driver->alloc_streams || !hcd->driver->free_streams)
2064 if (dev->speed != USB_SPEED_SUPER)
2066 if (dev->state < USB_STATE_CONFIGURED)
2069 for (i = 0; i < num_eps; i++) {
2070 /* Streams only apply to bulk endpoints. */
2071 if (!usb_endpoint_xfer_bulk(&eps[i]->desc))
2073 /* Re-alloc is not allowed */
2074 if (eps[i]->streams)
2078 ret = hcd->driver->alloc_streams(hcd, dev, eps, num_eps,
2079 num_streams, mem_flags);
2083 for (i = 0; i < num_eps; i++)
2084 eps[i]->streams = ret;
2088 EXPORT_SYMBOL_GPL(usb_alloc_streams);
2091 * usb_free_streams - free bulk endpoint stream IDs.
2092 * @interface: alternate setting that includes all endpoints.
2093 * @eps: array of endpoints to remove streams from.
2094 * @num_eps: number of endpoints in the array.
2095 * @mem_flags: flags hcd should use to allocate memory.
2097 * Reverts a group of bulk endpoints back to not using stream IDs.
2098 * Can fail if we are given bad arguments, or HCD is broken.
2100 * Return: 0 on success. On failure, a negative error code.
2102 int usb_free_streams(struct usb_interface *interface,
2103 struct usb_host_endpoint **eps, unsigned int num_eps,
2106 struct usb_hcd *hcd;
2107 struct usb_device *dev;
2110 dev = interface_to_usbdev(interface);
2111 hcd = bus_to_hcd(dev->bus);
2112 if (dev->speed != USB_SPEED_SUPER)
2115 /* Double-free is not allowed */
2116 for (i = 0; i < num_eps; i++)
2117 if (!eps[i] || !eps[i]->streams)
2120 ret = hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags);
2124 for (i = 0; i < num_eps; i++)
2125 eps[i]->streams = 0;
2129 EXPORT_SYMBOL_GPL(usb_free_streams);
2131 /* Protect against drivers that try to unlink URBs after the device
2132 * is gone, by waiting until all unlinks for @udev are finished.
2133 * Since we don't currently track URBs by device, simply wait until
2134 * nothing is running in the locked region of usb_hcd_unlink_urb().
2136 void usb_hcd_synchronize_unlinks(struct usb_device *udev)
2138 spin_lock_irq(&hcd_urb_unlink_lock);
2139 spin_unlock_irq(&hcd_urb_unlink_lock);
2142 /*-------------------------------------------------------------------------*/
2144 /* called in any context */
2145 int usb_hcd_get_frame_number (struct usb_device *udev)
2147 struct usb_hcd *hcd = bus_to_hcd(udev->bus);
2149 if (!HCD_RH_RUNNING(hcd))
2151 return hcd->driver->get_frame_number (hcd);
2154 /*-------------------------------------------------------------------------*/
2158 int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
2160 struct usb_hcd *hcd = container_of(rhdev->bus, struct usb_hcd, self);
2162 int old_state = hcd->state;
2164 dev_dbg(&rhdev->dev, "bus %ssuspend, wakeup %d\n",
2165 (PMSG_IS_AUTO(msg) ? "auto-" : ""),
2166 rhdev->do_remote_wakeup);
2167 if (HCD_DEAD(hcd)) {
2168 dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "suspend");
2172 if (!hcd->driver->bus_suspend) {
2175 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2176 hcd->state = HC_STATE_QUIESCING;
2177 status = hcd->driver->bus_suspend(hcd);
2180 usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
2181 hcd->state = HC_STATE_SUSPENDED;
2183 /* Did we race with a root-hub wakeup event? */
2184 if (rhdev->do_remote_wakeup) {
2187 status = hcd->driver->hub_status_data(hcd, buffer);
2189 dev_dbg(&rhdev->dev, "suspend raced with wakeup event\n");
2190 hcd_bus_resume(rhdev, PMSG_AUTO_RESUME);
2195 spin_lock_irq(&hcd_root_hub_lock);
2196 if (!HCD_DEAD(hcd)) {
2197 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2198 hcd->state = old_state;
2200 spin_unlock_irq(&hcd_root_hub_lock);
2201 dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
2207 int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
2209 struct usb_hcd *hcd = container_of(rhdev->bus, struct usb_hcd, self);
2211 int old_state = hcd->state;
2213 dev_dbg(&rhdev->dev, "usb %sresume\n",
2214 (PMSG_IS_AUTO(msg) ? "auto-" : ""));
2215 if (HCD_DEAD(hcd)) {
2216 dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "resume");
2219 if (!hcd->driver->bus_resume)
2221 if (HCD_RH_RUNNING(hcd))
2224 hcd->state = HC_STATE_RESUMING;
2225 status = hcd->driver->bus_resume(hcd);
2226 clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
2228 struct usb_device *udev;
2231 spin_lock_irq(&hcd_root_hub_lock);
2232 if (!HCD_DEAD(hcd)) {
2233 usb_set_device_state(rhdev, rhdev->actconfig
2234 ? USB_STATE_CONFIGURED
2235 : USB_STATE_ADDRESS);
2236 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2237 hcd->state = HC_STATE_RUNNING;
2239 spin_unlock_irq(&hcd_root_hub_lock);
2242 * Check whether any of the enabled ports on the root hub are
2243 * unsuspended. If they are then a TRSMRCY delay is needed
2244 * (this is what the USB-2 spec calls a "global resume").
2245 * Otherwise we can skip the delay.
2247 usb_hub_for_each_child(rhdev, port1, udev) {
2248 if (udev->state != USB_STATE_NOTATTACHED &&
2249 !udev->port_is_suspended) {
2250 usleep_range(10000, 11000); /* TRSMRCY */
2255 hcd->state = old_state;
2256 dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
2258 if (status != -ESHUTDOWN)
2264 /* Workqueue routine for root-hub remote wakeup */
2265 static void hcd_resume_work(struct work_struct *work)
2267 struct usb_hcd *hcd = container_of(work, struct usb_hcd, wakeup_work);
2268 struct usb_device *udev = hcd->self.root_hub;
2270 usb_remote_wakeup(udev);
2274 * usb_hcd_resume_root_hub - called by HCD to resume its root hub
2275 * @hcd: host controller for this root hub
2277 * The USB host controller calls this function when its root hub is
2278 * suspended (with the remote wakeup feature enabled) and a remote
2279 * wakeup request is received. The routine submits a workqueue request
2280 * to resume the root hub (that is, manage its downstream ports again).
2282 void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
2284 unsigned long flags;
2286 spin_lock_irqsave (&hcd_root_hub_lock, flags);
2287 if (hcd->rh_registered) {
2288 set_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
2289 queue_work(pm_wq, &hcd->wakeup_work);
2291 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
2293 EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
2295 #endif /* CONFIG_PM */
2297 /*-------------------------------------------------------------------------*/
2299 #ifdef CONFIG_USB_OTG
2302 * usb_bus_start_enum - start immediate enumeration (for OTG)
2303 * @bus: the bus (must use hcd framework)
2304 * @port_num: 1-based number of port; usually bus->otg_port
2305 * Context: in_interrupt()
2307 * Starts enumeration, with an immediate reset followed later by
2308 * hub_wq identifying and possibly configuring the device.
2309 * This is needed by OTG controller drivers, where it helps meet
2310 * HNP protocol timing requirements for starting a port reset.
2312 * Return: 0 if successful.
2314 int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num)
2316 struct usb_hcd *hcd;
2317 int status = -EOPNOTSUPP;
2319 /* NOTE: since HNP can't start by grabbing the bus's address0_sem,
2320 * boards with root hubs hooked up to internal devices (instead of
2321 * just the OTG port) may need more attention to resetting...
2323 hcd = container_of (bus, struct usb_hcd, self);
2324 if (port_num && hcd->driver->start_port_reset)
2325 status = hcd->driver->start_port_reset(hcd, port_num);
2327 /* allocate hub_wq shortly after (first) root port reset finishes;
2328 * it may issue others, until at least 50 msecs have passed.
2331 mod_timer(&hcd->rh_timer, jiffies + msecs_to_jiffies(10));
2334 EXPORT_SYMBOL_GPL(usb_bus_start_enum);
2338 /*-------------------------------------------------------------------------*/
2341 * usb_hcd_irq - hook IRQs to HCD framework (bus glue)
2342 * @irq: the IRQ being raised
2343 * @__hcd: pointer to the HCD whose IRQ is being signaled
2345 * If the controller isn't HALTed, calls the driver's irq handler.
2346 * Checks whether the controller is now dead.
2348 * Return: %IRQ_HANDLED if the IRQ was handled. %IRQ_NONE otherwise.
2350 irqreturn_t usb_hcd_irq (int irq, void *__hcd)
2352 struct usb_hcd *hcd = __hcd;
2355 if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd)))
2357 else if (hcd->driver->irq(hcd) == IRQ_NONE)
2364 EXPORT_SYMBOL_GPL(usb_hcd_irq);
2366 /*-------------------------------------------------------------------------*/
2369 * usb_hc_died - report abnormal shutdown of a host controller (bus glue)
2370 * @hcd: pointer to the HCD representing the controller
2372 * This is called by bus glue to report a USB host controller that died
2373 * while operations may still have been pending. It's called automatically
2374 * by the PCI glue, so only glue for non-PCI busses should need to call it.
2376 * Only call this function with the primary HCD.
2378 void usb_hc_died (struct usb_hcd *hcd)
2380 unsigned long flags;
2382 dev_err (hcd->self.controller, "HC died; cleaning up\n");
2384 spin_lock_irqsave (&hcd_root_hub_lock, flags);
2385 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2386 set_bit(HCD_FLAG_DEAD, &hcd->flags);
2387 if (hcd->rh_registered) {
2388 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2390 /* make hub_wq clean up old urbs and devices */
2391 usb_set_device_state (hcd->self.root_hub,
2392 USB_STATE_NOTATTACHED);
2393 usb_kick_hub_wq(hcd->self.root_hub);
2395 if (usb_hcd_is_primary_hcd(hcd) && hcd->shared_hcd) {
2396 hcd = hcd->shared_hcd;
2397 if (hcd->rh_registered) {
2398 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2400 /* make hub_wq clean up old urbs and devices */
2401 usb_set_device_state(hcd->self.root_hub,
2402 USB_STATE_NOTATTACHED);
2403 usb_kick_hub_wq(hcd->self.root_hub);
2406 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
2407 /* Make sure that the other roothub is also deallocated. */
2409 EXPORT_SYMBOL_GPL (usb_hc_died);
2411 /*-------------------------------------------------------------------------*/
2413 static void init_giveback_urb_bh(struct giveback_urb_bh *bh)
2416 spin_lock_init(&bh->lock);
2417 INIT_LIST_HEAD(&bh->head);
2418 tasklet_init(&bh->bh, usb_giveback_urb_bh, (unsigned long)bh);
2422 * usb_create_shared_hcd - create and initialize an HCD structure
2423 * @driver: HC driver that will use this hcd
2424 * @dev: device for this HC, stored in hcd->self.controller
2425 * @bus_name: value to store in hcd->self.bus_name
2426 * @primary_hcd: a pointer to the usb_hcd structure that is sharing the
2427 * PCI device. Only allocate certain resources for the primary HCD
2428 * Context: !in_interrupt()
2430 * Allocate a struct usb_hcd, with extra space at the end for the
2431 * HC driver's private data. Initialize the generic members of the
2434 * Return: On success, a pointer to the created and initialized HCD structure.
2435 * On failure (e.g. if memory is unavailable), %NULL.
2437 struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
2438 struct device *dev, const char *bus_name,
2439 struct usb_hcd *primary_hcd)
2441 struct usb_hcd *hcd;
2443 hcd = kzalloc(sizeof(*hcd) + driver->hcd_priv_size, GFP_KERNEL);
2445 dev_dbg (dev, "hcd alloc failed\n");
2448 if (primary_hcd == NULL) {
2449 hcd->bandwidth_mutex = kmalloc(sizeof(*hcd->bandwidth_mutex),
2451 if (!hcd->bandwidth_mutex) {
2453 dev_dbg(dev, "hcd bandwidth mutex alloc failed\n");
2456 mutex_init(hcd->bandwidth_mutex);
2457 dev_set_drvdata(dev, hcd);
2459 mutex_lock(&usb_port_peer_mutex);
2460 hcd->bandwidth_mutex = primary_hcd->bandwidth_mutex;
2461 hcd->primary_hcd = primary_hcd;
2462 primary_hcd->primary_hcd = primary_hcd;
2463 hcd->shared_hcd = primary_hcd;
2464 primary_hcd->shared_hcd = hcd;
2465 mutex_unlock(&usb_port_peer_mutex);
2468 kref_init(&hcd->kref);
2470 usb_bus_init(&hcd->self);
2471 hcd->self.controller = dev;
2472 hcd->self.bus_name = bus_name;
2473 hcd->self.uses_dma = (dev->dma_mask != NULL);
2475 init_timer(&hcd->rh_timer);
2476 hcd->rh_timer.function = rh_timer_func;
2477 hcd->rh_timer.data = (unsigned long) hcd;
2479 INIT_WORK(&hcd->wakeup_work, hcd_resume_work);
2482 hcd->driver = driver;
2483 hcd->speed = driver->flags & HCD_MASK;
2484 hcd->product_desc = (driver->product_desc) ? driver->product_desc :
2485 "USB Host Controller";
2488 EXPORT_SYMBOL_GPL(usb_create_shared_hcd);
2491 * usb_create_hcd - create and initialize an HCD structure
2492 * @driver: HC driver that will use this hcd
2493 * @dev: device for this HC, stored in hcd->self.controller
2494 * @bus_name: value to store in hcd->self.bus_name
2495 * Context: !in_interrupt()
2497 * Allocate a struct usb_hcd, with extra space at the end for the
2498 * HC driver's private data. Initialize the generic members of the
2501 * Return: On success, a pointer to the created and initialized HCD
2502 * structure. On failure (e.g. if memory is unavailable), %NULL.
2504 struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
2505 struct device *dev, const char *bus_name)
2507 return usb_create_shared_hcd(driver, dev, bus_name, NULL);
2509 EXPORT_SYMBOL_GPL(usb_create_hcd);
2512 * Roothubs that share one PCI device must also share the bandwidth mutex.
2513 * Don't deallocate the bandwidth_mutex until the last shared usb_hcd is
2516 * Make sure to only deallocate the bandwidth_mutex when the primary HCD is
2517 * freed. When hcd_release() is called for either hcd in a peer set
2518 * invalidate the peer's ->shared_hcd and ->primary_hcd pointers to
2519 * block new peering attempts
2521 static void hcd_release(struct kref *kref)
2523 struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref);
2525 mutex_lock(&usb_port_peer_mutex);
2526 if (usb_hcd_is_primary_hcd(hcd))
2527 kfree(hcd->bandwidth_mutex);
2528 if (hcd->shared_hcd) {
2529 struct usb_hcd *peer = hcd->shared_hcd;
2531 peer->shared_hcd = NULL;
2532 if (peer->primary_hcd == hcd)
2533 peer->primary_hcd = NULL;
2535 mutex_unlock(&usb_port_peer_mutex);
2539 struct usb_hcd *usb_get_hcd (struct usb_hcd *hcd)
2542 kref_get (&hcd->kref);
2545 EXPORT_SYMBOL_GPL(usb_get_hcd);
2547 void usb_put_hcd (struct usb_hcd *hcd)
2550 kref_put (&hcd->kref, hcd_release);
2552 EXPORT_SYMBOL_GPL(usb_put_hcd);
2554 int usb_hcd_is_primary_hcd(struct usb_hcd *hcd)
2556 if (!hcd->primary_hcd)
2558 return hcd == hcd->primary_hcd;
2560 EXPORT_SYMBOL_GPL(usb_hcd_is_primary_hcd);
2562 int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1)
2564 if (!hcd->driver->find_raw_port_number)
2567 return hcd->driver->find_raw_port_number(hcd, port1);
2570 static int usb_hcd_request_irqs(struct usb_hcd *hcd,
2571 unsigned int irqnum, unsigned long irqflags)
2575 if (hcd->driver->irq) {
2577 snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
2578 hcd->driver->description, hcd->self.busnum);
2579 retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
2580 hcd->irq_descr, hcd);
2582 dev_err(hcd->self.controller,
2583 "request interrupt %d failed\n",
2588 dev_info(hcd->self.controller, "irq %d, %s 0x%08llx\n", irqnum,
2589 (hcd->driver->flags & HCD_MEMORY) ?
2590 "io mem" : "io base",
2591 (unsigned long long)hcd->rsrc_start);
2594 if (hcd->rsrc_start)
2595 dev_info(hcd->self.controller, "%s 0x%08llx\n",
2596 (hcd->driver->flags & HCD_MEMORY) ?
2597 "io mem" : "io base",
2598 (unsigned long long)hcd->rsrc_start);
2604 * Before we free this root hub, flush in-flight peering attempts
2605 * and disable peer lookups
2607 static void usb_put_invalidate_rhdev(struct usb_hcd *hcd)
2609 struct usb_device *rhdev;
2611 mutex_lock(&usb_port_peer_mutex);
2612 rhdev = hcd->self.root_hub;
2613 hcd->self.root_hub = NULL;
2614 mutex_unlock(&usb_port_peer_mutex);
2619 * usb_add_hcd - finish generic HCD structure initialization and register
2620 * @hcd: the usb_hcd structure to initialize
2621 * @irqnum: Interrupt line to allocate
2622 * @irqflags: Interrupt type flags
2624 * Finish the remaining parts of generic HCD initialization: allocate the
2625 * buffers of consistent memory, register the bus, request the IRQ line,
2626 * and call the driver's reset() and start() routines.
2628 int usb_add_hcd(struct usb_hcd *hcd,
2629 unsigned int irqnum, unsigned long irqflags)
2632 struct usb_device *rhdev;
2634 if (IS_ENABLED(CONFIG_USB_PHY) && !hcd->usb_phy) {
2635 struct usb_phy *phy = usb_get_phy_dev(hcd->self.controller, 0);
2638 retval = PTR_ERR(phy);
2639 if (retval == -EPROBE_DEFER)
2642 retval = usb_phy_init(phy);
2648 hcd->remove_phy = 1;
2652 if (IS_ENABLED(CONFIG_GENERIC_PHY) && !hcd->phy) {
2653 struct phy *phy = phy_get(hcd->self.controller, "usb");
2656 retval = PTR_ERR(phy);
2657 if (retval == -EPROBE_DEFER)
2660 retval = phy_init(phy);
2665 retval = phy_power_on(phy);
2672 hcd->remove_phy = 1;
2676 dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
2678 /* Keep old behaviour if authorized_default is not in [0, 1]. */
2679 if (authorized_default < 0 || authorized_default > 1)
2680 hcd->authorized_default = hcd->wireless ? 0 : 1;
2682 hcd->authorized_default = authorized_default;
2683 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
2685 /* HC is in reset state, but accessible. Now do the one-time init,
2686 * bottom up so that hcds can customize the root hubs before hub_wq
2687 * starts talking to them. (Note, bus id is assigned early too.)
2689 retval = hcd_buffer_create(hcd);
2691 dev_dbg(hcd->self.controller, "pool alloc failed\n");
2692 goto err_create_buf;
2695 retval = usb_register_bus(&hcd->self);
2697 goto err_register_bus;
2699 rhdev = usb_alloc_dev(NULL, &hcd->self, 0);
2700 if (rhdev == NULL) {
2701 dev_err(hcd->self.controller, "unable to allocate root hub\n");
2703 goto err_allocate_root_hub;
2705 mutex_lock(&usb_port_peer_mutex);
2706 hcd->self.root_hub = rhdev;
2707 mutex_unlock(&usb_port_peer_mutex);
2709 switch (hcd->speed) {
2711 rhdev->speed = USB_SPEED_FULL;
2714 rhdev->speed = USB_SPEED_HIGH;
2717 rhdev->speed = USB_SPEED_WIRELESS;
2720 rhdev->speed = USB_SPEED_SUPER;
2724 goto err_set_rh_speed;
2727 /* wakeup flag init defaults to "everything works" for root hubs,
2728 * but drivers can override it in reset() if needed, along with
2729 * recording the overall controller's system wakeup capability.
2731 device_set_wakeup_capable(&rhdev->dev, 1);
2733 /* HCD_FLAG_RH_RUNNING doesn't matter until the root hub is
2734 * registered. But since the controller can die at any time,
2735 * let's initialize the flag before touching the hardware.
2737 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2739 /* "reset" is misnamed; its role is now one-time init. the controller
2740 * should already have been reset (and boot firmware kicked off etc).
2742 if (hcd->driver->reset) {
2743 retval = hcd->driver->reset(hcd);
2745 dev_err(hcd->self.controller, "can't setup: %d\n",
2747 goto err_hcd_driver_setup;
2750 hcd->rh_pollable = 1;
2752 /* NOTE: root hub and controller capabilities may not be the same */
2753 if (device_can_wakeup(hcd->self.controller)
2754 && device_can_wakeup(&hcd->self.root_hub->dev))
2755 dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
2757 /* initialize tasklets */
2758 init_giveback_urb_bh(&hcd->high_prio_bh);
2759 init_giveback_urb_bh(&hcd->low_prio_bh);
2761 /* enable irqs just before we start the controller,
2762 * if the BIOS provides legacy PCI irqs.
2764 if (usb_hcd_is_primary_hcd(hcd) && irqnum) {
2765 retval = usb_hcd_request_irqs(hcd, irqnum, irqflags);
2767 goto err_request_irq;
2770 hcd->state = HC_STATE_RUNNING;
2771 retval = hcd->driver->start(hcd);
2773 dev_err(hcd->self.controller, "startup error %d\n", retval);
2774 goto err_hcd_driver_start;
2777 /* starting here, usbcore will pay attention to this root hub */
2778 retval = register_root_hub(hcd);
2780 goto err_register_root_hub;
2782 retval = sysfs_create_group(&rhdev->dev.kobj, &usb_bus_attr_group);
2784 printk(KERN_ERR "Cannot register USB bus sysfs attributes: %d\n",
2786 goto error_create_attr_group;
2788 if (hcd->uses_new_polling && HCD_POLL_RH(hcd))
2789 usb_hcd_poll_rh_status(hcd);
2793 error_create_attr_group:
2794 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2795 if (HC_IS_RUNNING(hcd->state))
2796 hcd->state = HC_STATE_QUIESCING;
2797 spin_lock_irq(&hcd_root_hub_lock);
2798 hcd->rh_registered = 0;
2799 spin_unlock_irq(&hcd_root_hub_lock);
2802 cancel_work_sync(&hcd->wakeup_work);
2804 mutex_lock(&usb_bus_list_lock);
2805 usb_disconnect(&rhdev); /* Sets rhdev to NULL */
2806 mutex_unlock(&usb_bus_list_lock);
2807 err_register_root_hub:
2808 hcd->rh_pollable = 0;
2809 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2810 del_timer_sync(&hcd->rh_timer);
2811 hcd->driver->stop(hcd);
2812 hcd->state = HC_STATE_HALT;
2813 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2814 del_timer_sync(&hcd->rh_timer);
2815 err_hcd_driver_start:
2816 if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0)
2817 free_irq(irqnum, hcd);
2819 err_hcd_driver_setup:
2821 usb_put_invalidate_rhdev(hcd);
2822 err_allocate_root_hub:
2823 usb_deregister_bus(&hcd->self);
2825 hcd_buffer_destroy(hcd);
2827 if (IS_ENABLED(CONFIG_GENERIC_PHY) && hcd->remove_phy && hcd->phy) {
2828 phy_power_off(hcd->phy);
2834 if (hcd->remove_phy && hcd->usb_phy) {
2835 usb_phy_shutdown(hcd->usb_phy);
2836 usb_put_phy(hcd->usb_phy);
2837 hcd->usb_phy = NULL;
2841 EXPORT_SYMBOL_GPL(usb_add_hcd);
2844 * usb_remove_hcd - shutdown processing for generic HCDs
2845 * @hcd: the usb_hcd structure to remove
2846 * Context: !in_interrupt()
2848 * Disconnects the root hub, then reverses the effects of usb_add_hcd(),
2849 * invoking the HCD's stop() method.
2851 void usb_remove_hcd(struct usb_hcd *hcd)
2853 struct usb_device *rhdev = hcd->self.root_hub;
2855 dev_info(hcd->self.controller, "remove, state %x\n", hcd->state);
2858 sysfs_remove_group(&rhdev->dev.kobj, &usb_bus_attr_group);
2860 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2861 if (HC_IS_RUNNING (hcd->state))
2862 hcd->state = HC_STATE_QUIESCING;
2864 dev_dbg(hcd->self.controller, "roothub graceful disconnect\n");
2865 spin_lock_irq (&hcd_root_hub_lock);
2866 hcd->rh_registered = 0;
2867 spin_unlock_irq (&hcd_root_hub_lock);
2870 cancel_work_sync(&hcd->wakeup_work);
2873 mutex_lock(&usb_bus_list_lock);
2874 usb_disconnect(&rhdev); /* Sets rhdev to NULL */
2875 mutex_unlock(&usb_bus_list_lock);
2878 * tasklet_kill() isn't needed here because:
2879 * - driver's disconnect() called from usb_disconnect() should
2880 * make sure its URBs are completed during the disconnect()
2883 * - it is too late to run complete() here since driver may have
2884 * been removed already now
2887 /* Prevent any more root-hub status calls from the timer.
2888 * The HCD might still restart the timer (if a port status change
2889 * interrupt occurs), but usb_hcd_poll_rh_status() won't invoke
2890 * the hub_status_data() callback.
2892 hcd->rh_pollable = 0;
2893 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2894 del_timer_sync(&hcd->rh_timer);
2896 hcd->driver->stop(hcd);
2897 hcd->state = HC_STATE_HALT;
2899 /* In case the HCD restarted the timer, stop it again. */
2900 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2901 del_timer_sync(&hcd->rh_timer);
2903 if (usb_hcd_is_primary_hcd(hcd)) {
2905 free_irq(hcd->irq, hcd);
2908 usb_deregister_bus(&hcd->self);
2909 hcd_buffer_destroy(hcd);
2911 if (IS_ENABLED(CONFIG_GENERIC_PHY) && hcd->remove_phy && hcd->phy) {
2912 phy_power_off(hcd->phy);
2917 if (hcd->remove_phy && hcd->usb_phy) {
2918 usb_phy_shutdown(hcd->usb_phy);
2919 usb_put_phy(hcd->usb_phy);
2920 hcd->usb_phy = NULL;
2923 usb_put_invalidate_rhdev(hcd);
2925 EXPORT_SYMBOL_GPL(usb_remove_hcd);
2928 usb_hcd_platform_shutdown(struct platform_device *dev)
2930 struct usb_hcd *hcd = platform_get_drvdata(dev);
2932 if (hcd->driver->shutdown)
2933 hcd->driver->shutdown(hcd);
2935 EXPORT_SYMBOL_GPL(usb_hcd_platform_shutdown);
2937 /*-------------------------------------------------------------------------*/
2939 #if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
2941 struct usb_mon_operations *mon_ops;
2944 * The registration is unlocked.
2945 * We do it this way because we do not want to lock in hot paths.
2947 * Notice that the code is minimally error-proof. Because usbmon needs
2948 * symbols from usbcore, usbcore gets referenced and cannot be unloaded first.
2951 int usb_mon_register (struct usb_mon_operations *ops)
2961 EXPORT_SYMBOL_GPL (usb_mon_register);
2963 void usb_mon_deregister (void)
2966 if (mon_ops == NULL) {
2967 printk(KERN_ERR "USB: monitor was not registered\n");
2973 EXPORT_SYMBOL_GPL (usb_mon_deregister);
2975 #endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */