drivers/usb/core/hcd.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * (C) Copyright Linus Torvalds 1999
   4  * (C) Copyright Johannes Erdfelt 1999-2001
   5  * (C) Copyright Andreas Gal 1999
   6  * (C) Copyright Gregory P. Smith 1999
   7  * (C) Copyright Deti Fliegl 1999
   8  * (C) Copyright Randy Dunlap 2000
   9  * (C) Copyright David Brownell 2000-2002
  10  */
  11
  12 #include <linux/bcd.h>
  13 #include <linux/module.h>
  14 #include <linux/version.h>
  15 #include <linux/kernel.h>
  16 #include <linux/sched/task_stack.h>
  17 #include <linux/slab.h>
  18 #include <linux/completion.h>
  19 #include <linux/utsname.h>
  20 #include <linux/mm.h>
  21 #include <asm/io.h>
  22 #include <linux/device.h>
  23 #include <linux/dma-mapping.h>
  24 #include <linux/mutex.h>
  25 #include <asm/irq.h>
  26 #include <asm/byteorder.h>
  27 #include <asm/unaligned.h>
  28 #include <linux/platform_device.h>
  29 #include <linux/workqueue.h>
  30 #include <linux/pm_runtime.h>
  31 #include <linux/types.h>
  32 #include <linux/genalloc.h>
  33 #include <linux/io.h>
  34
  35 #include <linux/phy/phy.h>
  36 #include <linux/usb.h>
  37 #include <linux/usb/hcd.h>
  38 #include <linux/usb/otg.h>
  39
  40 #include "usb.h"
  41 #include "phy.h"
  42
  43
  44 /*-------------------------------------------------------------------------*/
  45
  46 /*
  47  * USB Host Controller Driver framework
  48  *
  49  * Plugs into usbcore (usb_bus) and lets HCDs share code, minimizing
  50  * HCD-specific behaviors/bugs.
  51  *
  52  * This does error checks, tracks devices and urbs, and delegates to a
  53  * "hc_driver" only for code (and data) that really needs to know about
  54  * hardware differences.  That includes root hub registers, i/o queues,
  55  * and so on ... but as little else as possible.
  56  *
  57  * Shared code includes most of the "root hub" code (these are emulated,
  58  * though each HC's hardware works differently) and PCI glue, plus request
  59  * tracking overhead.  The HCD code should only block on spinlocks or on
  60  * hardware handshaking; blocking on software events (such as other kernel
  61  * threads releasing resources, or completing actions) is all generic.
  62  *
  63  * Happens the USB 2.0 spec says this would be invisible inside the "USBD",
  64  * and includes mostly a "HCDI" (HCD Interface) along with some APIs used
  65  * only by the hub driver ... and that neither should be seen or used by
  66  * usb client device drivers.
  67  *
  68  * Contributors of ideas or unattributed patches include: David Brownell,
  69  * Roman Weissgaerber, Rory Bolt, Greg Kroah-Hartman, ...
  70  *
  71  * HISTORY:
  72  * 2002-02-21   Pull in most of the usb_bus support from usb.c; some
  73  *              associated cleanup.  "usb_hcd" still != "usb_bus".
  74  * 2001-12-12   Initial patch version for Linux 2.5.1 kernel.
  75  */
  76
  77 /*-------------------------------------------------------------------------*/
  78
  79 /* Keep track of which host controller drivers are loaded */
  80 unsigned long usb_hcds_loaded;
  81 EXPORT_SYMBOL_GPL(usb_hcds_loaded);
  82
  83 /* host controllers we manage */
  84 DEFINE_IDR (usb_bus_idr);
  85 EXPORT_SYMBOL_GPL (usb_bus_idr);
  86
  87 /* used when allocating bus numbers */
  88 #define USB_MAXBUS              64
  89
  90 /* used when updating list of hcds */
  91 DEFINE_MUTEX(usb_bus_idr_lock); /* exported only for usbfs */
  92 EXPORT_SYMBOL_GPL (usb_bus_idr_lock);
  93
  94 /* used for controlling access to virtual root hubs */
  95 static DEFINE_SPINLOCK(hcd_root_hub_lock);
  96
  97 /* used when updating an endpoint's URB list */
  98 static DEFINE_SPINLOCK(hcd_urb_list_lock);
  99
 100 /* used to protect against unlinking URBs after the device is gone */
 101 static DEFINE_SPINLOCK(hcd_urb_unlink_lock);
 102
 103 /* wait queue for synchronous unlinks */
 104 DECLARE_WAIT_QUEUE_HEAD(usb_kill_urb_queue);
 105
 106 static inline int is_root_hub(struct usb_device *udev)
 107 {
 108         return (udev->parent == NULL);
 109 }
 110
 111 /*-------------------------------------------------------------------------*/
 112
 113 /*
 114  * Sharable chunks of root hub code.
 115  */
 116
 117 /*-------------------------------------------------------------------------*/
 118 #define KERNEL_REL      bin2bcd(((LINUX_VERSION_CODE >> 16) & 0x0ff))
 119 #define KERNEL_VER      bin2bcd(((LINUX_VERSION_CODE >> 8) & 0x0ff))
 120
 121 /* usb 3.1 root hub device descriptor */
 122 static const u8 usb31_rh_dev_descriptor[18] = {
 123         0x12,       /*  __u8  bLength; */
 124         USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
 125         0x10, 0x03, /*  __le16 bcdUSB; v3.1 */
 126
 127         0x09,       /*  __u8  bDeviceClass; HUB_CLASSCODE */
 128         0x00,       /*  __u8  bDeviceSubClass; */
 129         0x03,       /*  __u8  bDeviceProtocol; USB 3 hub */
 130         0x09,       /*  __u8  bMaxPacketSize0; 2^9 = 512 Bytes */
 131
 132         0x6b, 0x1d, /*  __le16 idVendor; Linux Foundation 0x1d6b */
 133         0x03, 0x00, /*  __le16 idProduct; device 0x0003 */
 134         KERNEL_VER, KERNEL_REL, /*  __le16 bcdDevice */
 135
 136         0x03,       /*  __u8  iManufacturer; */
 137         0x02,       /*  __u8  iProduct; */
 138         0x01,       /*  __u8  iSerialNumber; */
 139         0x01        /*  __u8  bNumConfigurations; */
 140 };
 141
 142 /* usb 3.0 root hub device descriptor */
 143 static const u8 usb3_rh_dev_descriptor[18] = {
 144         0x12,       /*  __u8  bLength; */
 145         USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
 146         0x00, 0x03, /*  __le16 bcdUSB; v3.0 */
 147
 148         0x09,       /*  __u8  bDeviceClass; HUB_CLASSCODE */
 149         0x00,       /*  __u8  bDeviceSubClass; */
 150         0x03,       /*  __u8  bDeviceProtocol; USB 3.0 hub */
 151         0x09,       /*  __u8  bMaxPacketSize0; 2^9 = 512 Bytes */
 152
 153         0x6b, 0x1d, /*  __le16 idVendor; Linux Foundation 0x1d6b */
 154         0x03, 0x00, /*  __le16 idProduct; device 0x0003 */
 155         KERNEL_VER, KERNEL_REL, /*  __le16 bcdDevice */
 156
 157         0x03,       /*  __u8  iManufacturer; */
 158         0x02,       /*  __u8  iProduct; */
 159         0x01,       /*  __u8  iSerialNumber; */
 160         0x01        /*  __u8  bNumConfigurations; */
 161 };
 162
 163 /* usb 2.5 (wireless USB 1.0) root hub device descriptor */
 164 static const u8 usb25_rh_dev_descriptor[18] = {
 165         0x12,       /*  __u8  bLength; */
 166         USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
 167         0x50, 0x02, /*  __le16 bcdUSB; v2.5 */
 168
 169         0x09,       /*  __u8  bDeviceClass; HUB_CLASSCODE */
 170         0x00,       /*  __u8  bDeviceSubClass; */
 171         0x00,       /*  __u8  bDeviceProtocol; [ usb 2.0 no TT ] */
 172         0xFF,       /*  __u8  bMaxPacketSize0; always 0xFF (WUSB Spec 7.4.1). */
 173
 174         0x6b, 0x1d, /*  __le16 idVendor; Linux Foundation 0x1d6b */
 175         0x02, 0x00, /*  __le16 idProduct; device 0x0002 */
 176         KERNEL_VER, KERNEL_REL, /*  __le16 bcdDevice */
 177
 178         0x03,       /*  __u8  iManufacturer; */
 179         0x02,       /*  __u8  iProduct; */
 180         0x01,       /*  __u8  iSerialNumber; */
 181         0x01        /*  __u8  bNumConfigurations; */
 182 };
 183
 184 /* usb 2.0 root hub device descriptor */
 185 static const u8 usb2_rh_dev_descriptor[18] = {
 186         0x12,       /*  __u8  bLength; */
 187         USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
 188         0x00, 0x02, /*  __le16 bcdUSB; v2.0 */
 189
 190         0x09,       /*  __u8  bDeviceClass; HUB_CLASSCODE */
 191         0x00,       /*  __u8  bDeviceSubClass; */
 192         0x00,       /*  __u8  bDeviceProtocol; [ usb 2.0 no TT ] */
 193         0x40,       /*  __u8  bMaxPacketSize0; 64 Bytes */
 194
 195         0x6b, 0x1d, /*  __le16 idVendor; Linux Foundation 0x1d6b */
 196         0x02, 0x00, /*  __le16 idProduct; device 0x0002 */
 197         KERNEL_VER, KERNEL_REL, /*  __le16 bcdDevice */
 198
 199         0x03,       /*  __u8  iManufacturer; */
 200         0x02,       /*  __u8  iProduct; */
 201         0x01,       /*  __u8  iSerialNumber; */
 202         0x01        /*  __u8  bNumConfigurations; */
 203 };
 204
 205 /* no usb 2.0 root hub "device qualifier" descriptor: one speed only */
 206
 207 /* usb 1.1 root hub device descriptor */
 208 static const u8 usb11_rh_dev_descriptor[18] = {
 209         0x12,       /*  __u8  bLength; */
 210         USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
 211         0x10, 0x01, /*  __le16 bcdUSB; v1.1 */
 212
 213         0x09,       /*  __u8  bDeviceClass; HUB_CLASSCODE */
 214         0x00,       /*  __u8  bDeviceSubClass; */
 215         0x00,       /*  __u8  bDeviceProtocol; [ low/full speeds only ] */
 216         0x40,       /*  __u8  bMaxPacketSize0; 64 Bytes */
 217
 218         0x6b, 0x1d, /*  __le16 idVendor; Linux Foundation 0x1d6b */
 219         0x01, 0x00, /*  __le16 idProduct; device 0x0001 */
 220         KERNEL_VER, KERNEL_REL, /*  __le16 bcdDevice */
 221
 222         0x03,       /*  __u8  iManufacturer; */
 223         0x02,       /*  __u8  iProduct; */
 224         0x01,       /*  __u8  iSerialNumber; */
 225         0x01        /*  __u8  bNumConfigurations; */
 226 };
 227
 228
 229 /*-------------------------------------------------------------------------*/
 230
 231 /* Configuration descriptors for our root hubs */
 232
 233 static const u8 fs_rh_config_descriptor[] = {
 234
 235         /* one configuration */
 236         0x09,       /*  __u8  bLength; */
 237         USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
 238         0x19, 0x00, /*  __le16 wTotalLength; */
 239         0x01,       /*  __u8  bNumInterfaces; (1) */
 240         0x01,       /*  __u8  bConfigurationValue; */
 241         0x00,       /*  __u8  iConfiguration; */
 242         0xc0,       /*  __u8  bmAttributes;
 243                                  Bit 7: must be set,
 244                                      6: Self-powered,
 245                                      5: Remote wakeup,
 246                                      4..0: resvd */
 247         0x00,       /*  __u8  MaxPower; */
 248
 249         /* USB 1.1:
 250          * USB 2.0, single TT organization (mandatory):
 251          *      one interface, protocol 0
 252          *
 253          * USB 2.0, multiple TT organization (optional):
 254          *      two interfaces, protocols 1 (like single TT)
 255          *      and 2 (multiple TT mode) ... config is
 256          *      sometimes settable
 257          *      NOT IMPLEMENTED
 258          */
 259
 260         /* one interface */
 261         0x09,       /*  __u8  if_bLength; */
 262         USB_DT_INTERFACE,  /* __u8 if_bDescriptorType; Interface */
 263         0x00,       /*  __u8  if_bInterfaceNumber; */
 264         0x00,       /*  __u8  if_bAlternateSetting; */
 265         0x01,       /*  __u8  if_bNumEndpoints; */
 266         0x09,       /*  __u8  if_bInterfaceClass; HUB_CLASSCODE */
 267         0x00,       /*  __u8  if_bInterfaceSubClass; */
 268         0x00,       /*  __u8  if_bInterfaceProtocol; [usb1.1 or single tt] */
 269         0x00,       /*  __u8  if_iInterface; */
 270
 271         /* one endpoint (status change endpoint) */
 272         0x07,       /*  __u8  ep_bLength; */
 273         USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
 274         0x81,       /*  __u8  ep_bEndpointAddress; IN Endpoint 1 */
 275         0x03,       /*  __u8  ep_bmAttributes; Interrupt */
 276         0x02, 0x00, /*  __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
 277         0xff        /*  __u8  ep_bInterval; (255ms -- usb 2.0 spec) */
 278 };
 279
 280 static const u8 hs_rh_config_descriptor[] = {
 281
 282         /* one configuration */
 283         0x09,       /*  __u8  bLength; */
 284         USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
 285         0x19, 0x00, /*  __le16 wTotalLength; */
 286         0x01,       /*  __u8  bNumInterfaces; (1) */
 287         0x01,       /*  __u8  bConfigurationValue; */
 288         0x00,       /*  __u8  iConfiguration; */
 289         0xc0,       /*  __u8  bmAttributes;
 290                                  Bit 7: must be set,
 291                                      6: Self-powered,
 292                                      5: Remote wakeup,
 293                                      4..0: resvd */
 294         0x00,       /*  __u8  MaxPower; */
 295
 296         /* USB 1.1:
 297          * USB 2.0, single TT organization (mandatory):
 298          *      one interface, protocol 0
 299          *
 300          * USB 2.0, multiple TT organization (optional):
 301          *      two interfaces, protocols 1 (like single TT)
 302          *      and 2 (multiple TT mode) ... config is
 303          *      sometimes settable
 304          *      NOT IMPLEMENTED
 305          */
 306
 307         /* one interface */
 308         0x09,       /*  __u8  if_bLength; */
 309         USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
 310         0x00,       /*  __u8  if_bInterfaceNumber; */
 311         0x00,       /*  __u8  if_bAlternateSetting; */
 312         0x01,       /*  __u8  if_bNumEndpoints; */
 313         0x09,       /*  __u8  if_bInterfaceClass; HUB_CLASSCODE */
 314         0x00,       /*  __u8  if_bInterfaceSubClass; */
 315         0x00,       /*  __u8  if_bInterfaceProtocol; [usb1.1 or single tt] */
 316         0x00,       /*  __u8  if_iInterface; */
 317
 318         /* one endpoint (status change endpoint) */
 319         0x07,       /*  __u8  ep_bLength; */
 320         USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
 321         0x81,       /*  __u8  ep_bEndpointAddress; IN Endpoint 1 */
 322         0x03,       /*  __u8  ep_bmAttributes; Interrupt */
 323                     /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
 324                      * see hub.c:hub_configure() for details. */
 325         (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
 326         0x0c        /*  __u8  ep_bInterval; (256ms -- usb 2.0 spec) */
 327 };
 328
 329 static const u8 ss_rh_config_descriptor[] = {
 330         /* one configuration */
 331         0x09,       /*  __u8  bLength; */
 332         USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
 333         0x1f, 0x00, /*  __le16 wTotalLength; */
 334         0x01,       /*  __u8  bNumInterfaces; (1) */
 335         0x01,       /*  __u8  bConfigurationValue; */
 336         0x00,       /*  __u8  iConfiguration; */
 337         0xc0,       /*  __u8  bmAttributes;
 338                                  Bit 7: must be set,
 339                                      6: Self-powered,
 340                                      5: Remote wakeup,
 341                                      4..0: resvd */
 342         0x00,       /*  __u8  MaxPower; */
 343
 344         /* one interface */
 345         0x09,       /*  __u8  if_bLength; */
 346         USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
 347         0x00,       /*  __u8  if_bInterfaceNumber; */
 348         0x00,       /*  __u8  if_bAlternateSetting; */
 349         0x01,       /*  __u8  if_bNumEndpoints; */
 350         0x09,       /*  __u8  if_bInterfaceClass; HUB_CLASSCODE */
 351         0x00,       /*  __u8  if_bInterfaceSubClass; */
 352         0x00,       /*  __u8  if_bInterfaceProtocol; */
 353         0x00,       /*  __u8  if_iInterface; */
 354
 355         /* one endpoint (status change endpoint) */
 356         0x07,       /*  __u8  ep_bLength; */
 357         USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
 358         0x81,       /*  __u8  ep_bEndpointAddress; IN Endpoint 1 */
 359         0x03,       /*  __u8  ep_bmAttributes; Interrupt */
 360                     /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
 361                      * see hub.c:hub_configure() for details. */
 362         (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
 363         0x0c,       /*  __u8  ep_bInterval; (256ms -- usb 2.0 spec) */
 364
 365         /* one SuperSpeed endpoint companion descriptor */
 366         0x06,        /* __u8 ss_bLength */
 367         USB_DT_SS_ENDPOINT_COMP, /* __u8 ss_bDescriptorType; SuperSpeed EP */
 368                      /* Companion */
 369         0x00,        /* __u8 ss_bMaxBurst; allows 1 TX between ACKs */
 370         0x00,        /* __u8 ss_bmAttributes; 1 packet per service interval */
 371         0x02, 0x00   /* __le16 ss_wBytesPerInterval; 15 bits for max 15 ports */
 372 };
 373
 374 /* authorized_default behaviour:
 375  * -1 is authorized for all devices except wireless (old behaviour)
 376  * 0 is unauthorized for all devices
 377  * 1 is authorized for all devices
 378  * 2 is authorized for internal devices
 379  */
 380 #define USB_AUTHORIZE_WIRED     -1
 381 #define USB_AUTHORIZE_NONE      0
 382 #define USB_AUTHORIZE_ALL       1
 383 #define USB_AUTHORIZE_INTERNAL  2
 384
 385 static int authorized_default = USB_AUTHORIZE_WIRED;
 386 module_param(authorized_default, int, S_IRUGO|S_IWUSR);
 387 MODULE_PARM_DESC(authorized_default,
 388                 "Default USB device authorization: 0 is not authorized, 1 is "
 389                 "authorized, 2 is authorized for internal devices, -1 is "
 390                 "authorized except for wireless USB (default, old behaviour)");
 391 /*-------------------------------------------------------------------------*/
 392
 393 /**
 394  * ascii2desc() - Helper routine for producing UTF-16LE string descriptors
 395  * @s: Null-terminated ASCII (actually ISO-8859-1) string
 396  * @buf: Buffer for USB string descriptor (header + UTF-16LE)
 397  * @len: Length (in bytes; may be odd) of descriptor buffer.
 398  *
 399  * Return: The number of bytes filled in: 2 + 2*strlen(s) or @len,
 400  * whichever is less.
 401  *
 402  * Note:
 403  * USB String descriptors can contain at most 126 characters; input
 404  * strings longer than that are truncated.
 405  */
 406 static unsigned
 407 ascii2desc(char const *s, u8 *buf, unsigned len)
 408 {
 409         unsigned n, t = 2 + 2*strlen(s);
 410
 411         if (t > 254)
 412                 t = 254;        /* Longest possible UTF string descriptor */
 413         if (len > t)
 414                 len = t;
 415
 416         t += USB_DT_STRING << 8;        /* Now t is first 16 bits to store */
 417
 418         n = len;
 419         while (n--) {
 420                 *buf++ = t;
 421                 if (!n--)
 422                         break;
 423                 *buf++ = t >> 8;
 424                 t = (unsigned char)*s++;
 425         }
 426         return len;
 427 }
 428
 429 /**
 430  * rh_string() - provides string descriptors for root hub
 431  * @id: the string ID number (0: langids, 1: serial #, 2: product, 3: vendor)
 432  * @hcd: the host controller for this root hub
 433  * @data: buffer for output packet
 434  * @len: length of the provided buffer
 435  *
 436  * Produces either a manufacturer, product or serial number string for the
 437  * virtual root hub device.
 438  *
 439  * Return: The number of bytes filled in: the length of the descriptor or
 440  * of the provided buffer, whichever is less.
 441  */
 442 static unsigned
 443 rh_string(int id, struct usb_hcd const *hcd, u8 *data, unsigned len)
 444 {
 445         char buf[100];
 446         char const *s;
 447         static char const langids[4] = {4, USB_DT_STRING, 0x09, 0x04};
 448
 449         /* language ids */
 450         switch (id) {
 451         case 0:
 452                 /* Array of LANGID codes (0x0409 is MSFT-speak for "en-us") */
 453                 /* See http://www.usb.org/developers/docs/USB_LANGIDs.pdf */
 454                 if (len > 4)
 455                         len = 4;
 456                 memcpy(data, langids, len);
 457                 return len;
 458         case 1:
 459                 /* Serial number */
 460                 s = hcd->self.bus_name;
 461                 break;
 462         case 2:
 463                 /* Product name */
 464                 s = hcd->product_desc;
 465                 break;
 466         case 3:
 467                 /* Manufacturer */
 468                 snprintf (buf, sizeof buf, "%s %s %s", init_utsname()->sysname,
 469                         init_utsname()->release, hcd->driver->description);
 470                 s = buf;
 471                 break;
 472         default:
 473                 /* Can't happen; caller guarantees it */
 474                 return 0;
 475         }
 476
 477         return ascii2desc(s, data, len);
 478 }
 479
 480
 481 /* Root hub control transfers execute synchronously */
 482 static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
 483 {
 484         struct usb_ctrlrequest *cmd;
 485         u16             typeReq, wValue, wIndex, wLength;
 486         u8              *ubuf = urb->transfer_buffer;
 487         unsigned        len = 0;
 488         int             status;
 489         u8              patch_wakeup = 0;
 490         u8              patch_protocol = 0;
 491         u16             tbuf_size;
 492         u8              *tbuf = NULL;
 493         const u8        *bufp;
 494
 495         might_sleep();
 496
 497         spin_lock_irq(&hcd_root_hub_lock);
 498         status = usb_hcd_link_urb_to_ep(hcd, urb);
 499         spin_unlock_irq(&hcd_root_hub_lock);
 500         if (status)
 501                 return status;
 502         urb->hcpriv = hcd;      /* Indicate it's queued */
 503
 504         cmd = (struct usb_ctrlrequest *) urb->setup_packet;
 505         typeReq  = (cmd->bRequestType << 8) | cmd->bRequest;
 506         wValue   = le16_to_cpu (cmd->wValue);
 507         wIndex   = le16_to_cpu (cmd->wIndex);
 508         wLength  = le16_to_cpu (cmd->wLength);
 509
 510         if (wLength > urb->transfer_buffer_length)
 511                 goto error;
 512
 513         /*
 514          * tbuf should be at least as big as the
 515          * USB hub descriptor.
 516          */
 517         tbuf_size =  max_t(u16, sizeof(struct usb_hub_descriptor), wLength);
 518         tbuf = kzalloc(tbuf_size, GFP_KERNEL);
 519         if (!tbuf) {
 520                 status = -ENOMEM;
 521                 goto err_alloc;
 522         }
 523
 524         bufp = tbuf;
 525
 526
 527         urb->actual_length = 0;
 528         switch (typeReq) {
 529
 530         /* DEVICE REQUESTS */
 531
 532         /* The root hub's remote wakeup enable bit is implemented using
 533          * driver model wakeup flags.  If this system supports wakeup
 534          * through USB, userspace may change the default "allow wakeup"
 535          * policy through sysfs or these calls.
 536          *
 537          * Most root hubs support wakeup from downstream devices, for
 538          * runtime power management (disabling USB clocks and reducing
 539          * VBUS power usage).  However, not all of them do so; silicon,
 540          * board, and BIOS bugs here are not uncommon, so these can't
 541          * be treated quite like external hubs.
 542          *
 543          * Likewise, not all root hubs will pass wakeup events upstream,
 544          * to wake up the whole system.  So don't assume root hub and
 545          * controller capabilities are identical.
 546          */
 547
 548         case DeviceRequest | USB_REQ_GET_STATUS:
 549                 tbuf[0] = (device_may_wakeup(&hcd->self.root_hub->dev)
 550                                         << USB_DEVICE_REMOTE_WAKEUP)
 551                                 | (1 << USB_DEVICE_SELF_POWERED);
 552                 tbuf[1] = 0;
 553                 len = 2;
 554                 break;
 555         case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
 556                 if (wValue == USB_DEVICE_REMOTE_WAKEUP)
 557                         device_set_wakeup_enable(&hcd->self.root_hub->dev, 0);
 558                 else
 559                         goto error;
 560                 break;
 561         case DeviceOutRequest | USB_REQ_SET_FEATURE:
 562                 if (device_can_wakeup(&hcd->self.root_hub->dev)
 563                                 && wValue == USB_DEVICE_REMOTE_WAKEUP)
 564                         device_set_wakeup_enable(&hcd->self.root_hub->dev, 1);
 565                 else
 566                         goto error;
 567                 break;
 568         case DeviceRequest | USB_REQ_GET_CONFIGURATION:
 569                 tbuf[0] = 1;
 570                 len = 1;
 571                         /* FALLTHROUGH */
 572         case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
 573                 break;
 574         case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
 575                 switch (wValue & 0xff00) {
 576                 case USB_DT_DEVICE << 8:
 577                         switch (hcd->speed) {
 578                         case HCD_USB32:
 579                         case HCD_USB31:
 580                                 bufp = usb31_rh_dev_descriptor;
 581                                 break;
 582                         case HCD_USB3:
 583                                 bufp = usb3_rh_dev_descriptor;
 584                                 break;
 585                         case HCD_USB25:
 586                                 bufp = usb25_rh_dev_descriptor;
 587                                 break;
 588                         case HCD_USB2:
 589                                 bufp = usb2_rh_dev_descriptor;
 590                                 break;
 591                         case HCD_USB11:
 592                                 bufp = usb11_rh_dev_descriptor;
 593                                 break;
 594                         default:
 595                                 goto error;
 596                         }
 597                         len = 18;
 598                         if (hcd->has_tt)
 599                                 patch_protocol = 1;
 600                         break;
 601                 case USB_DT_CONFIG << 8:
 602                         switch (hcd->speed) {
 603                         case HCD_USB32:
 604                         case HCD_USB31:
 605                         case HCD_USB3:
 606                                 bufp = ss_rh_config_descriptor;
 607                                 len = sizeof ss_rh_config_descriptor;
 608                                 break;
 609                         case HCD_USB25:
 610                         case HCD_USB2:
 611                                 bufp = hs_rh_config_descriptor;
 612                                 len = sizeof hs_rh_config_descriptor;
 613                                 break;
 614                         case HCD_USB11:
 615                                 bufp = fs_rh_config_descriptor;
 616                                 len = sizeof fs_rh_config_descriptor;
 617                                 break;
 618                         default:
 619                                 goto error;
 620                         }
 621                         if (device_can_wakeup(&hcd->self.root_hub->dev))
 622                                 patch_wakeup = 1;
 623                         break;
 624                 case USB_DT_STRING << 8:
 625                         if ((wValue & 0xff) < 4)
 626                                 urb->actual_length = rh_string(wValue & 0xff,
 627                                                 hcd, ubuf, wLength);
 628                         else /* unsupported IDs --> "protocol stall" */
 629                                 goto error;
 630                         break;
 631                 case USB_DT_BOS << 8:
 632                         goto nongeneric;
 633                 default:
 634                         goto error;
 635                 }
 636                 break;
 637         case DeviceRequest | USB_REQ_GET_INTERFACE:
 638                 tbuf[0] = 0;
 639                 len = 1;
 640                         /* FALLTHROUGH */
 641         case DeviceOutRequest | USB_REQ_SET_INTERFACE:
 642                 break;
 643         case DeviceOutRequest | USB_REQ_SET_ADDRESS:
 644                 /* wValue == urb->dev->devaddr */
 645                 dev_dbg (hcd->self.controller, "root hub device address %d\n",
 646                         wValue);
 647                 break;
 648
 649         /* INTERFACE REQUESTS (no defined feature/status flags) */
 650
 651         /* ENDPOINT REQUESTS */
 652
 653         case EndpointRequest | USB_REQ_GET_STATUS:
 654                 /* ENDPOINT_HALT flag */
 655                 tbuf[0] = 0;
 656                 tbuf[1] = 0;
 657                 len = 2;
 658                         /* FALLTHROUGH */
 659         case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
 660         case EndpointOutRequest | USB_REQ_SET_FEATURE:
 661                 dev_dbg (hcd->self.controller, "no endpoint features yet\n");
 662                 break;
 663
 664         /* CLASS REQUESTS (and errors) */
 665
 666         default:
 667 nongeneric:
 668                 /* non-generic request */
 669                 switch (typeReq) {
 670                 case GetHubStatus:
 671                         len = 4;
 672                         break;
 673                 case GetPortStatus:
 674                         if (wValue == HUB_PORT_STATUS)
 675                                 len = 4;
 676                         else
 677                                 /* other port status types return 8 bytes */
 678                                 len = 8;
 679                         break;
 680                 case GetHubDescriptor:
 681                         len = sizeof (struct usb_hub_descriptor);
 682                         break;
 683                 case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
 684                         /* len is returned by hub_control */
 685                         break;
 686                 }
 687                 status = hcd->driver->hub_control (hcd,
 688                         typeReq, wValue, wIndex,
 689                         tbuf, wLength);
 690
 691                 if (typeReq == GetHubDescriptor)
 692                         usb_hub_adjust_deviceremovable(hcd->self.root_hub,
 693                                 (struct usb_hub_descriptor *)tbuf);
 694                 break;
 695 error:
 696                 /* "protocol stall" on error */
 697                 status = -EPIPE;
 698         }
 699
 700         if (status < 0) {
 701                 len = 0;
 702                 if (status != -EPIPE) {
 703                         dev_dbg (hcd->self.controller,
 704                                 "CTRL: TypeReq=0x%x val=0x%x "
 705                                 "idx=0x%x len=%d ==> %d\n",
 706                                 typeReq, wValue, wIndex,
 707                                 wLength, status);
 708                 }
 709         } else if (status > 0) {
 710                 /* hub_control may return the length of data copied. */
 711                 len = status;
 712                 status = 0;
 713         }
 714         if (len) {
 715                 if (urb->transfer_buffer_length < len)
 716                         len = urb->transfer_buffer_length;
 717                 urb->actual_length = len;
 718                 /* always USB_DIR_IN, toward host */
 719                 memcpy (ubuf, bufp, len);
 720
 721                 /* report whether RH hardware supports remote wakeup */
 722                 if (patch_wakeup &&
 723                                 len > offsetof (struct usb_config_descriptor,
 724                                                 bmAttributes))
 725                         ((struct usb_config_descriptor *)ubuf)->bmAttributes
 726                                 |= USB_CONFIG_ATT_WAKEUP;
 727
 728                 /* report whether RH hardware has an integrated TT */
 729                 if (patch_protocol &&
 730                                 len > offsetof(struct usb_device_descriptor,
 731                                                 bDeviceProtocol))
 732                         ((struct usb_device_descriptor *) ubuf)->
 733                                 bDeviceProtocol = USB_HUB_PR_HS_SINGLE_TT;
 734         }
 735
 736         kfree(tbuf);
 737  err_alloc:
 738
 739         /* any errors get returned through the urb completion */
 740         spin_lock_irq(&hcd_root_hub_lock);
 741         usb_hcd_unlink_urb_from_ep(hcd, urb);
 742         usb_hcd_giveback_urb(hcd, urb, status);
 743         spin_unlock_irq(&hcd_root_hub_lock);
 744         return 0;
 745 }
 746
 747 /*-------------------------------------------------------------------------*/
 748
 749 /*
 750  * Root Hub interrupt transfers are polled using a timer if the
 751  * driver requests it; otherwise the driver is responsible for
 752  * calling usb_hcd_poll_rh_status() when an event occurs.
 753  *
 754  * Completions are called in_interrupt(), but they may or may not
 755  * be in_irq().
 756  */
 757 void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
 758 {
 759         struct urb      *urb;
 760         int             length;
 761         unsigned long   flags;
 762         char            buffer[6];      /* Any root hubs with > 31 ports? */
 763
 764         if (unlikely(!hcd->rh_pollable))
 765                 return;
 766         if (!hcd->uses_new_polling && !hcd->status_urb)
 767                 return;
 768
 769         length = hcd->driver->hub_status_data(hcd, buffer);
 770         if (length > 0) {
 771
 772                 /* try to complete the status urb */
 773                 spin_lock_irqsave(&hcd_root_hub_lock, flags);
 774                 urb = hcd->status_urb;
 775                 if (urb) {
 776                         clear_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
 777                         hcd->status_urb = NULL;
 778                         urb->actual_length = length;
 779                         memcpy(urb->transfer_buffer, buffer, length);
 780
 781                         usb_hcd_unlink_urb_from_ep(hcd, urb);
 782                         usb_hcd_giveback_urb(hcd, urb, 0);
 783                 } else {
 784                         length = 0;
 785                         set_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
 786                 }
 787                 spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
 788         }
 789
 790         /* The USB 2.0 spec says 256 ms.  This is close enough and won't
 791          * exceed that limit if HZ is 100. The math is more clunky than
 792          * maybe expected, this is to make sure that all timers for USB devices
 793          * fire at the same time to give the CPU a break in between */
 794         if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) :
 795                         (length == 0 && hcd->status_urb != NULL))
 796                 mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
 797 }
 798 EXPORT_SYMBOL_GPL(usb_hcd_poll_rh_status);
 799
 800 /* timer callback */
 801 static void rh_timer_func (struct timer_list *t)
 802 {
 803         struct usb_hcd *_hcd = from_timer(_hcd, t, rh_timer);
 804
 805         usb_hcd_poll_rh_status(_hcd);
 806 }
 807
 808 /*-------------------------------------------------------------------------*/
 809
 810 static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb)
 811 {
 812         int             retval;
 813         unsigned long   flags;
 814         unsigned        len = 1 + (urb->dev->maxchild / 8);
 815
 816         spin_lock_irqsave (&hcd_root_hub_lock, flags);
 817         if (hcd->status_urb || urb->transfer_buffer_length < len) {
 818                 dev_dbg (hcd->self.controller, "not queuing rh status urb\n");
 819                 retval = -EINVAL;
 820                 goto done;
 821         }
 822
 823         retval = usb_hcd_link_urb_to_ep(hcd, urb);
 824         if (retval)
 825                 goto done;
 826
 827         hcd->status_urb = urb;
 828         urb->hcpriv = hcd;      /* indicate it's queued */
 829         if (!hcd->uses_new_polling)
 830                 mod_timer(&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
 831
 832         /* If a status change has already occurred, report it ASAP */
 833         else if (HCD_POLL_PENDING(hcd))
 834                 mod_timer(&hcd->rh_timer, jiffies);
 835         retval = 0;
 836  done:
 837         spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
 838         return retval;
 839 }
 840
 841 static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb)
 842 {
 843         if (usb_endpoint_xfer_int(&urb->ep->desc))
 844                 return rh_queue_status (hcd, urb);
 845         if (usb_endpoint_xfer_control(&urb->ep->desc))
 846                 return rh_call_control (hcd, urb);
 847         return -EINVAL;
 848 }
 849
 850 /*-------------------------------------------------------------------------*/
 851
 852 /* Unlinks of root-hub control URBs are legal, but they don't do anything
 853  * since these URBs always execute synchronously.
 854  */
 855 static int usb_rh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 856 {
 857         unsigned long   flags;
 858         int             rc;
 859
 860         spin_lock_irqsave(&hcd_root_hub_lock, flags);
 861         rc = usb_hcd_check_unlink_urb(hcd, urb, status);
 862         if (rc)
 863                 goto done;
 864
 865         if (usb_endpoint_num(&urb->ep->desc) == 0) {    /* Control URB */
 866                 ;       /* Do nothing */
 867
 868         } else {                                /* Status URB */
 869                 if (!hcd->uses_new_polling)
 870                         del_timer (&hcd->rh_timer);
 871                 if (urb == hcd->status_urb) {
 872                         hcd->status_urb = NULL;
 873                         usb_hcd_unlink_urb_from_ep(hcd, urb);
 874                         usb_hcd_giveback_urb(hcd, urb, status);
 875                 }
 876         }
 877  done:
 878         spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
 879         return rc;
 880 }
 881
 882
 883
 884 /*
 885  * Show & store the current value of authorized_default
 886  */
 887 static ssize_t authorized_default_show(struct device *dev,
 888                                        struct device_attribute *attr, char *buf)
 889 {
 890         struct usb_device *rh_usb_dev = to_usb_device(dev);
 891         struct usb_bus *usb_bus = rh_usb_dev->bus;
 892         struct usb_hcd *hcd;
 893
 894         hcd = bus_to_hcd(usb_bus);
 895         return snprintf(buf, PAGE_SIZE, "%u\n", hcd->dev_policy);
 896 }
 897
 898 static ssize_t authorized_default_store(struct device *dev,
 899                                         struct device_attribute *attr,
 900                                         const char *buf, size_t size)
 901 {
 902         ssize_t result;
 903         unsigned val;
 904         struct usb_device *rh_usb_dev = to_usb_device(dev);
 905         struct usb_bus *usb_bus = rh_usb_dev->bus;
 906         struct usb_hcd *hcd;
 907
 908         hcd = bus_to_hcd(usb_bus);
 909         result = sscanf(buf, "%u\n", &val);
 910         if (result == 1) {
 911                 hcd->dev_policy = val <= USB_DEVICE_AUTHORIZE_INTERNAL ?
 912                         val : USB_DEVICE_AUTHORIZE_ALL;
 913                 result = size;
 914         } else {
 915                 result = -EINVAL;
 916         }
 917         return result;
 918 }
 919 static DEVICE_ATTR_RW(authorized_default);
 920
 921 /*
 922  * interface_authorized_default_show - show default authorization status
 923  * for USB interfaces
 924  *
 925  * note: interface_authorized_default is the default value
 926  *       for initializing the authorized attribute of interfaces
 927  */
 928 static ssize_t interface_authorized_default_show(struct device *dev,
 929                 struct device_attribute *attr, char *buf)
 930 {
 931         struct usb_device *usb_dev = to_usb_device(dev);
 932         struct usb_hcd *hcd = bus_to_hcd(usb_dev->bus);
 933
 934         return sprintf(buf, "%u\n", !!HCD_INTF_AUTHORIZED(hcd));
 935 }
 936
 937 /*
 938  * interface_authorized_default_store - store default authorization status
 939  * for USB interfaces
 940  *
 941  * note: interface_authorized_default is the default value
 942  *       for initializing the authorized attribute of interfaces
 943  */
 944 static ssize_t interface_authorized_default_store(struct device *dev,
 945                 struct device_attribute *attr, const char *buf, size_t count)
 946 {
 947         struct usb_device *usb_dev = to_usb_device(dev);
 948         struct usb_hcd *hcd = bus_to_hcd(usb_dev->bus);
 949         int rc = count;
 950         bool val;
 951
 952         if (strtobool(buf, &val) != 0)
 953                 return -EINVAL;
 954
 955         if (val)
 956                 set_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
 957         else
 958                 clear_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
 959
 960         return rc;
 961 }
 962 static DEVICE_ATTR_RW(interface_authorized_default);
 963
 964 /* Group all the USB bus attributes */
 965 static struct attribute *usb_bus_attrs[] = {
 966                 &dev_attr_authorized_default.attr,
 967                 &dev_attr_interface_authorized_default.attr,
 968                 NULL,
 969 };
 970
 971 static const struct attribute_group usb_bus_attr_group = {
 972         .name = NULL,   /* we want them in the same directory */
 973         .attrs = usb_bus_attrs,
 974 };
 975
 976
 977
 978 /*-------------------------------------------------------------------------*/
 979
 980 /**
 981  * usb_bus_init - shared initialization code
 982  * @bus: the bus structure being initialized
 983  *
 984  * This code is used to initialize a usb_bus structure, memory for which is
 985  * separately managed.
 986  */
 987 static void usb_bus_init (struct usb_bus *bus)
 988 {
 989         memset (&bus->devmap, 0, sizeof(struct usb_devmap));
 990
 991         bus->devnum_next = 1;
 992
 993         bus->root_hub = NULL;
 994         bus->busnum = -1;
 995         bus->bandwidth_allocated = 0;
 996         bus->bandwidth_int_reqs  = 0;
 997         bus->bandwidth_isoc_reqs = 0;
 998         mutex_init(&bus->devnum_next_mutex);
 999 }
1000
1001 /*-------------------------------------------------------------------------*/
1002
1003 /**
1004  * usb_register_bus - registers the USB host controller with the usb core
1005  * @bus: pointer to the bus to register
1006  * Context: !in_interrupt()
1007  *
1008  * Assigns a bus number, and links the controller into usbcore data
1009  * structures so that it can be seen by scanning the bus list.
1010  *
1011  * Return: 0 if successful. A negative error code otherwise.
1012  */
1013 static int usb_register_bus(struct usb_bus *bus)
1014 {
1015         int result = -E2BIG;
1016         int busnum;
1017
1018         mutex_lock(&usb_bus_idr_lock);
1019         busnum = idr_alloc(&usb_bus_idr, bus, 1, USB_MAXBUS, GFP_KERNEL);
1020         if (busnum < 0) {
1021                 pr_err("%s: failed to get bus number\n", usbcore_name);
1022                 goto error_find_busnum;
1023         }
1024         bus->busnum = busnum;
1025         mutex_unlock(&usb_bus_idr_lock);
1026
1027         usb_notify_add_bus(bus);
1028
1029         dev_info (bus->controller, "new USB bus registered, assigned bus "
1030                   "number %d\n", bus->busnum);
1031         return 0;
1032
1033 error_find_busnum:
1034         mutex_unlock(&usb_bus_idr_lock);
1035         return result;
1036 }
1037
1038 /**
1039  * usb_deregister_bus - deregisters the USB host controller
1040  * @bus: pointer to the bus to deregister
1041  * Context: !in_interrupt()
1042  *
1043  * Recycles the bus number, and unlinks the controller from usbcore data
1044  * structures so that it won't be seen by scanning the bus list.
1045  */
1046 static void usb_deregister_bus (struct usb_bus *bus)
1047 {
1048         dev_info (bus->controller, "USB bus %d deregistered\n", bus->busnum);
1049
1050         /*
1051          * NOTE: make sure that all the devices are removed by the
1052          * controller code, as well as having it call this when cleaning
1053          * itself up
1054          */
1055         mutex_lock(&usb_bus_idr_lock);
1056         idr_remove(&usb_bus_idr, bus->busnum);
1057         mutex_unlock(&usb_bus_idr_lock);
1058
1059         usb_notify_remove_bus(bus);
1060 }
1061
1062 /**
1063  * register_root_hub - called by usb_add_hcd() to register a root hub
1064  * @hcd: host controller for this root hub
1065  *
1066  * This function registers the root hub with the USB subsystem.  It sets up
1067  * the device properly in the device tree and then calls usb_new_device()
1068  * to register the usb device.  It also assigns the root hub's USB address
1069  * (always 1).
1070  *
1071  * Return: 0 if successful. A negative error code otherwise.
1072  */
1073 static int register_root_hub(struct usb_hcd *hcd)
1074 {
1075         struct device *parent_dev = hcd->self.controller;
1076         struct usb_device *usb_dev = hcd->self.root_hub;
1077         const int devnum = 1;
1078         int retval;
1079
1080         usb_dev->devnum = devnum;
1081         usb_dev->bus->devnum_next = devnum + 1;
1082         set_bit (devnum, usb_dev->bus->devmap.devicemap);
1083         usb_set_device_state(usb_dev, USB_STATE_ADDRESS);
1084
1085         mutex_lock(&usb_bus_idr_lock);
1086
1087         usb_dev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
1088         retval = usb_get_device_descriptor(usb_dev, USB_DT_DEVICE_SIZE);
1089         if (retval != sizeof usb_dev->descriptor) {
1090                 mutex_unlock(&usb_bus_idr_lock);
1091                 dev_dbg (parent_dev, "can't read %s device descriptor %d\n",
1092                                 dev_name(&usb_dev->dev), retval);
1093                 return (retval < 0) ? retval : -EMSGSIZE;
1094         }
1095
1096         if (le16_to_cpu(usb_dev->descriptor.bcdUSB) >= 0x0201) {
1097                 retval = usb_get_bos_descriptor(usb_dev);
1098                 if (!retval) {
1099                         usb_dev->lpm_capable = usb_device_supports_lpm(usb_dev);
1100                 } else if (usb_dev->speed >= USB_SPEED_SUPER) {
1101                         mutex_unlock(&usb_bus_idr_lock);
1102                         dev_dbg(parent_dev, "can't read %s bos descriptor %d\n",
1103                                         dev_name(&usb_dev->dev), retval);
1104                         return retval;
1105                 }
1106         }
1107
1108         retval = usb_new_device (usb_dev);
1109         if (retval) {
1110                 dev_err (parent_dev, "can't register root hub for %s, %d\n",
1111                                 dev_name(&usb_dev->dev), retval);
1112         } else {
1113                 spin_lock_irq (&hcd_root_hub_lock);
1114                 hcd->rh_registered = 1;
1115                 spin_unlock_irq (&hcd_root_hub_lock);
1116
1117                 /* Did the HC die before the root hub was registered? */
1118                 if (HCD_DEAD(hcd))
1119                         usb_hc_died (hcd);      /* This time clean up */
1120         }
1121         mutex_unlock(&usb_bus_idr_lock);
1122
1123         return retval;
1124 }
1125
1126 /*
1127  * usb_hcd_start_port_resume - a root-hub port is sending a resume signal
1128  * @bus: the bus which the root hub belongs to
1129  * @portnum: the port which is being resumed
1130  *
1131  * HCDs should call this function when they know that a resume signal is
1132  * being sent to a root-hub port.  The root hub will be prevented from
1133  * going into autosuspend until usb_hcd_end_port_resume() is called.
1134  *
1135  * The bus's private lock must be held by the caller.
1136  */
1137 void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum)
1138 {
1139         unsigned bit = 1 << portnum;
1140
1141         if (!(bus->resuming_ports & bit)) {
1142                 bus->resuming_ports |= bit;
1143                 pm_runtime_get_noresume(&bus->root_hub->dev);
1144         }
1145 }
1146 EXPORT_SYMBOL_GPL(usb_hcd_start_port_resume);
1147
1148 /*
1149  * usb_hcd_end_port_resume - a root-hub port has stopped sending a resume signal
1150  * @bus: the bus which the root hub belongs to
1151  * @portnum: the port which is being resumed
1152  *
1153  * HCDs should call this function when they know that a resume signal has
1154  * stopped being sent to a root-hub port.  The root hub will be allowed to
1155  * autosuspend again.
1156  *
1157  * The bus's private lock must be held by the caller.
1158  */
1159 void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum)
1160 {
1161         unsigned bit = 1 << portnum;
1162
1163         if (bus->resuming_ports & bit) {
1164                 bus->resuming_ports &= ~bit;
1165                 pm_runtime_put_noidle(&bus->root_hub->dev);
1166         }
1167 }
1168 EXPORT_SYMBOL_GPL(usb_hcd_end_port_resume);
1169
1170 /*-------------------------------------------------------------------------*/
1171
1172 /**
1173  * usb_calc_bus_time - approximate periodic transaction time in nanoseconds
1174  * @speed: from dev->speed; USB_SPEED_{LOW,FULL,HIGH}
1175  * @is_input: true iff the transaction sends data to the host
1176  * @isoc: true for isochronous transactions, false for interrupt ones
1177  * @bytecount: how many bytes in the transaction.
1178  *
1179  * Return: Approximate bus time in nanoseconds for a periodic transaction.
1180  *
1181  * Note:
1182  * See USB 2.0 spec section 5.11.3; only periodic transfers need to be
1183  * scheduled in software, this function is only used for such scheduling.
1184  */
1185 long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount)
1186 {
1187         unsigned long   tmp;
1188
1189         switch (speed) {
1190         case USB_SPEED_LOW:     /* INTR only */
1191                 if (is_input) {
1192                         tmp = (67667L * (31L + 10L * BitTime (bytecount))) / 1000L;
1193                         return 64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
1194                 } else {
1195                         tmp = (66700L * (31L + 10L * BitTime (bytecount))) / 1000L;
1196                         return 64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
1197                 }
1198         case USB_SPEED_FULL:    /* ISOC or INTR */
1199                 if (isoc) {
1200                         tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
1201                         return ((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp;
1202                 } else {
1203                         tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
1204                         return 9107L + BW_HOST_DELAY + tmp;
1205                 }
1206         case USB_SPEED_HIGH:    /* ISOC or INTR */
1207                 /* FIXME adjust for input vs output */
1208                 if (isoc)
1209                         tmp = HS_NSECS_ISO (bytecount);
1210                 else
1211                         tmp = HS_NSECS (bytecount);
1212                 return tmp;
1213         default:
1214                 pr_debug ("%s: bogus device speed!\n", usbcore_name);
1215                 return -1;
1216         }
1217 }
1218 EXPORT_SYMBOL_GPL(usb_calc_bus_time);
1219
1220
1221 /*-------------------------------------------------------------------------*/
1222
1223 /*
1224  * Generic HC operations.
1225  */
1226
1227 /*-------------------------------------------------------------------------*/
1228
1229 /**
1230  * usb_hcd_link_urb_to_ep - add an URB to its endpoint queue
1231  * @hcd: host controller to which @urb was submitted
1232  * @urb: URB being submitted
1233  *
1234  * Host controller drivers should call this routine in their enqueue()
1235  * method.  The HCD's private spinlock must be held and interrupts must
1236  * be disabled.  The actions carried out here are required for URB
1237  * submission, as well as for endpoint shutdown and for usb_kill_urb.
1238  *
1239  * Return: 0 for no error, otherwise a negative error code (in which case
1240  * the enqueue() method must fail).  If no error occurs but enqueue() fails
1241  * anyway, it must call usb_hcd_unlink_urb_from_ep() before releasing
1242  * the private spinlock and returning.
1243  */
1244 int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb)
1245 {
1246         int             rc = 0;
1247
1248         spin_lock(&hcd_urb_list_lock);
1249
1250         /* Check that the URB isn't being killed */
1251         if (unlikely(atomic_read(&urb->reject))) {
1252                 rc = -EPERM;
1253                 goto done;
1254         }
1255
1256         if (unlikely(!urb->ep->enabled)) {
1257                 rc = -ENOENT;
1258                 goto done;
1259         }
1260
1261         if (unlikely(!urb->dev->can_submit)) {
1262                 rc = -EHOSTUNREACH;
1263                 goto done;
1264         }
1265
1266         /*
1267          * Check the host controller's state and add the URB to the
1268          * endpoint's queue.
1269          */
1270         if (HCD_RH_RUNNING(hcd)) {
1271                 urb->unlinked = 0;
1272                 list_add_tail(&urb->urb_list, &urb->ep->urb_list);
1273         } else {
1274                 rc = -ESHUTDOWN;
1275                 goto done;
1276         }
1277  done:
1278         spin_unlock(&hcd_urb_list_lock);
1279         return rc;
1280 }
1281 EXPORT_SYMBOL_GPL(usb_hcd_link_urb_to_ep);
1282
1283 /**
1284  * usb_hcd_check_unlink_urb - check whether an URB may be unlinked
1285  * @hcd: host controller to which @urb was submitted
1286  * @urb: URB being checked for unlinkability
1287  * @status: error code to store in @urb if the unlink succeeds
1288  *
1289  * Host controller drivers should call this routine in their dequeue()
1290  * method.  The HCD's private spinlock must be held and interrupts must
1291  * be disabled.  The actions carried out here are required for making
1292  * sure than an unlink is valid.
1293  *
1294  * Return: 0 for no error, otherwise a negative error code (in which case
1295  * the dequeue() method must fail).  The possible error codes are:
1296  *
1297  *      -EIDRM: @urb was not submitted or has already completed.
1298  *              The completion function may not have been called yet.
1299  *
1300  *      -EBUSY: @urb has already been unlinked.
1301  */
1302 int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
1303                 int status)
1304 {
1305         struct list_head        *tmp;
1306
1307         /* insist the urb is still queued */
1308         list_for_each(tmp, &urb->ep->urb_list) {
1309                 if (tmp == &urb->urb_list)
1310                         break;
1311         }
1312         if (tmp != &urb->urb_list)
1313                 return -EIDRM;
1314
1315         /* Any status except -EINPROGRESS means something already started to
1316          * unlink this URB from the hardware.  So there's no more work to do.
1317          */
1318         if (urb->unlinked)
1319                 return -EBUSY;
1320         urb->unlinked = status;
1321         return 0;
1322 }
1323 EXPORT_SYMBOL_GPL(usb_hcd_check_unlink_urb);
1324
1325 /**
1326  * usb_hcd_unlink_urb_from_ep - remove an URB from its endpoint queue
1327  * @hcd: host controller to which @urb was submitted
1328  * @urb: URB being unlinked
1329  *
1330  * Host controller drivers should call this routine before calling
1331  * usb_hcd_giveback_urb().  The HCD's private spinlock must be held and
1332  * interrupts must be disabled.  The actions carried out here are required
1333  * for URB completion.
1334  */
1335 void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb)
1336 {
1337         /* clear all state linking urb to this dev (and hcd) */
1338         spin_lock(&hcd_urb_list_lock);
1339         list_del_init(&urb->urb_list);
1340         spin_unlock(&hcd_urb_list_lock);
1341 }
1342 EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep);
1343
1344 /*
1345  * Some usb host controllers can only perform dma using a small SRAM area.
1346  * The usb core itself is however optimized for host controllers that can dma
1347  * using regular system memory - like pci devices doing bus mastering.
1348  *
1349  * To support host controllers with limited dma capabilities we provide dma
1350  * bounce buffers. This feature can be enabled by initializing
1351  * hcd->localmem_pool using usb_hcd_setup_local_mem().
1352  * For this to work properly the host controller code must first use the
1353  * function dma_declare_coherent_memory() to point out which memory area
1354  * that should be used for dma allocations.
1355  *
1356  * The initialized hcd->localmem_pool then tells the usb code to allocate all
1357  * data for dma using the genalloc API.
1358  *
1359  * So, to summarize...
1360  *
1361  * - We need "local" memory, canonical example being
1362  *   a small SRAM on a discrete controller being the
1363  *   only memory that the controller can read ...
1364  *   (a) "normal" kernel memory is no good, and
1365  *   (b) there's not enough to share
1366  *
1367  * - So we use that, even though the primary requirement
1368  *   is that the memory be "local" (hence addressable
1369  *   by that device), not "coherent".
1370  *
1371  */
1372
1373 static int hcd_alloc_coherent(struct usb_bus *bus,
1374                               gfp_t mem_flags, dma_addr_t *dma_handle,
1375                               void **vaddr_handle, size_t size,
1376                               enum dma_data_direction dir)
1377 {
1378         unsigned char *vaddr;
1379
1380         if (*vaddr_handle == NULL) {
1381                 WARN_ON_ONCE(1);
1382                 return -EFAULT;
1383         }
1384
1385         vaddr = hcd_buffer_alloc(bus, size + sizeof(vaddr),
1386                                  mem_flags, dma_handle);
1387         if (!vaddr)
1388                 return -ENOMEM;
1389
1390         /*
1391          * Store the virtual address of the buffer at the end
1392          * of the allocated dma buffer. The size of the buffer
1393          * may be uneven so use unaligned functions instead
1394          * of just rounding up. It makes sense to optimize for
1395          * memory footprint over access speed since the amount
1396          * of memory available for dma may be limited.
1397          */
1398         put_unaligned((unsigned long)*vaddr_handle,
1399                       (unsigned long *)(vaddr + size));
1400
1401         if (dir == DMA_TO_DEVICE)
1402                 memcpy(vaddr, *vaddr_handle, size);
1403
1404         *vaddr_handle = vaddr;
1405         return 0;
1406 }
1407
1408 static void hcd_free_coherent(struct usb_bus *bus, dma_addr_t *dma_handle,
1409                               void **vaddr_handle, size_t size,
1410                               enum dma_data_direction dir)
1411 {
1412         unsigned char *vaddr = *vaddr_handle;
1413
1414         vaddr = (void *)get_unaligned((unsigned long *)(vaddr + size));
1415
1416         if (dir == DMA_FROM_DEVICE)
1417                 memcpy(vaddr, *vaddr_handle, size);
1418
1419         hcd_buffer_free(bus, size + sizeof(vaddr), *vaddr_handle, *dma_handle);
1420
1421         *vaddr_handle = vaddr;
1422         *dma_handle = 0;
1423 }
1424
1425 void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *hcd, struct urb *urb)
1426 {
1427         if (IS_ENABLED(CONFIG_HAS_DMA) &&
1428             (urb->transfer_flags & URB_SETUP_MAP_SINGLE))
1429                 dma_unmap_single(hcd->self.sysdev,
1430                                 urb->setup_dma,
1431                                 sizeof(struct usb_ctrlrequest),
1432                                 DMA_TO_DEVICE);
1433         else if (urb->transfer_flags & URB_SETUP_MAP_LOCAL)
1434                 hcd_free_coherent(urb->dev->bus,
1435                                 &urb->setup_dma,
1436                                 (void **) &urb->setup_packet,
1437                                 sizeof(struct usb_ctrlrequest),
1438                                 DMA_TO_DEVICE);
1439
1440         /* Make it safe to call this routine more than once */
1441         urb->transfer_flags &= ~(URB_SETUP_MAP_SINGLE | URB_SETUP_MAP_LOCAL);
1442 }
1443 EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_setup_for_dma);
1444
1445 static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
1446 {
1447         if (hcd->driver->unmap_urb_for_dma)
1448                 hcd->driver->unmap_urb_for_dma(hcd, urb);
1449         else
1450                 usb_hcd_unmap_urb_for_dma(hcd, urb);
1451 }
1452
1453 void usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
1454 {
1455         enum dma_data_direction dir;
1456
1457         usb_hcd_unmap_urb_setup_for_dma(hcd, urb);
1458
1459         dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
1460         if (IS_ENABLED(CONFIG_HAS_DMA) &&
1461             (urb->transfer_flags & URB_DMA_MAP_SG))
1462                 dma_unmap_sg(hcd->self.sysdev,
1463                                 urb->sg,
1464                                 urb->num_sgs,
1465                                 dir);
1466         else if (IS_ENABLED(CONFIG_HAS_DMA) &&
1467                  (urb->transfer_flags & URB_DMA_MAP_PAGE))
1468                 dma_unmap_page(hcd->self.sysdev,
1469                                 urb->transfer_dma,
1470                                 urb->transfer_buffer_length,
1471                                 dir);
1472         else if (IS_ENABLED(CONFIG_HAS_DMA) &&
1473                  (urb->transfer_flags & URB_DMA_MAP_SINGLE))
1474                 dma_unmap_single(hcd->self.sysdev,
1475                                 urb->transfer_dma,
1476                                 urb->transfer_buffer_length,
1477                                 dir);
1478         else if (urb->transfer_flags & URB_MAP_LOCAL)
1479                 hcd_free_coherent(urb->dev->bus,
1480                                 &urb->transfer_dma,
1481                                 &urb->transfer_buffer,
1482                                 urb->transfer_buffer_length,
1483                                 dir);
1484
1485         /* Make it safe to call this routine more than once */
1486         urb->transfer_flags &= ~(URB_DMA_MAP_SG | URB_DMA_MAP_PAGE |
1487                         URB_DMA_MAP_SINGLE | URB_MAP_LOCAL);
1488 }
1489 EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_for_dma);
1490
1491 static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
1492                            gfp_t mem_flags)
1493 {
1494         if (hcd->driver->map_urb_for_dma)
1495                 return hcd->driver->map_urb_for_dma(hcd, urb, mem_flags);
1496         else
1497                 return usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
1498 }
1499
1500 int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
1501                             gfp_t mem_flags)
1502 {
1503         enum dma_data_direction dir;
1504         int ret = 0;
1505
1506         /* Map the URB's buffers for DMA access.
1507          * Lower level HCD code should use *_dma exclusively,
1508          * unless it uses pio or talks to another transport,
1509          * or uses the provided scatter gather list for bulk.
1510          */
1511
1512         if (usb_endpoint_xfer_control(&urb->ep->desc)) {
1513                 if (hcd->self.uses_pio_for_control)
1514                         return ret;
1515                 if (IS_ENABLED(CONFIG_HAS_DMA) && hcd->self.uses_dma) {
1516                         if (is_vmalloc_addr(urb->setup_packet)) {
1517                                 WARN_ONCE(1, "setup packet is not dma capable\n");
1518                                 return -EAGAIN;
1519                         } else if (object_is_on_stack(urb->setup_packet)) {
1520                                 WARN_ONCE(1, "setup packet is on stack\n");
1521                                 return -EAGAIN;
1522                         }
1523
1524                         urb->setup_dma = dma_map_single(
1525                                         hcd->self.sysdev,
1526                                         urb->setup_packet,
1527                                         sizeof(struct usb_ctrlrequest),
1528                                         DMA_TO_DEVICE);
1529                         if (dma_mapping_error(hcd->self.sysdev,
1530                                                 urb->setup_dma))
1531                                 return -EAGAIN;
1532                         urb->transfer_flags |= URB_SETUP_MAP_SINGLE;
1533                 } else if (hcd->localmem_pool) {
1534                         ret = hcd_alloc_coherent(
1535                                         urb->dev->bus, mem_flags,
1536                                         &urb->setup_dma,
1537                                         (void **)&urb->setup_packet,
1538                                         sizeof(struct usb_ctrlrequest),
1539                                         DMA_TO_DEVICE);
1540                         if (ret)
1541                                 return ret;
1542                         urb->transfer_flags |= URB_SETUP_MAP_LOCAL;
1543                 }
1544         }
1545
1546         dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
1547         if (urb->transfer_buffer_length != 0
1548             && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
1549                 if (IS_ENABLED(CONFIG_HAS_DMA) && hcd->self.uses_dma) {
1550                         if (urb->num_sgs) {
1551                                 int n;
1552
1553                                 /* We don't support sg for isoc transfers ! */
1554                                 if (usb_endpoint_xfer_isoc(&urb->ep->desc)) {
1555                                         WARN_ON(1);
1556                                         return -EINVAL;
1557                                 }
1558
1559                                 n = dma_map_sg(
1560                                                 hcd->self.sysdev,
1561                                                 urb->sg,
1562                                                 urb->num_sgs,
1563                                                 dir);
1564                                 if (n <= 0)
1565                                         ret = -EAGAIN;
1566                                 else
1567                                         urb->transfer_flags |= URB_DMA_MAP_SG;
1568                                 urb->num_mapped_sgs = n;
1569                                 if (n != urb->num_sgs)
1570                                         urb->transfer_flags |=
1571                                                         URB_DMA_SG_COMBINED;
1572                         } else if (urb->sg) {
1573                                 struct scatterlist *sg = urb->sg;
1574                                 urb->transfer_dma = dma_map_page(
1575                                                 hcd->self.sysdev,
1576                                                 sg_page(sg),
1577                                                 sg->offset,
1578                                                 urb->transfer_buffer_length,
1579                                                 dir);
1580                                 if (dma_mapping_error(hcd->self.sysdev,
1581                                                 urb->transfer_dma))
1582                                         ret = -EAGAIN;
1583                                 else
1584                                         urb->transfer_flags |= URB_DMA_MAP_PAGE;
1585                         } else if (is_vmalloc_addr(urb->transfer_buffer)) {
1586                                 WARN_ONCE(1, "transfer buffer not dma capable\n");
1587                                 ret = -EAGAIN;
1588                         } else if (object_is_on_stack(urb->transfer_buffer)) {
1589                                 WARN_ONCE(1, "transfer buffer is on stack\n");
1590                                 ret = -EAGAIN;
1591                         } else {
1592                                 urb->transfer_dma = dma_map_single(
1593                                                 hcd->self.sysdev,
1594                                                 urb->transfer_buffer,
1595                                                 urb->transfer_buffer_length,
1596                                                 dir);
1597                                 if (dma_mapping_error(hcd->self.sysdev,
1598                                                 urb->transfer_dma))
1599                                         ret = -EAGAIN;
1600                                 else
1601                                         urb->transfer_flags |= URB_DMA_MAP_SINGLE;
1602                         }
1603                 } else if (hcd->localmem_pool) {
1604                         ret = hcd_alloc_coherent(
1605                                         urb->dev->bus, mem_flags,
1606                                         &urb->transfer_dma,
1607                                         &urb->transfer_buffer,
1608                                         urb->transfer_buffer_length,
1609                                         dir);
1610                         if (ret == 0)
1611                                 urb->transfer_flags |= URB_MAP_LOCAL;
1612                 }
1613                 if (ret && (urb->transfer_flags & (URB_SETUP_MAP_SINGLE |
1614                                 URB_SETUP_MAP_LOCAL)))
1615                         usb_hcd_unmap_urb_for_dma(hcd, urb);
1616         }
1617         return ret;
1618 }
1619 EXPORT_SYMBOL_GPL(usb_hcd_map_urb_for_dma);
1620
1621 /*-------------------------------------------------------------------------*/
1622
1623 /* may be called in any context with a valid urb->dev usecount
1624  * caller surrenders "ownership" of urb
1625  * expects usb_submit_urb() to have sanity checked and conditioned all
1626  * inputs in the urb
1627  */
1628 int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
1629 {
1630         int                     status;
1631         struct usb_hcd          *hcd = bus_to_hcd(urb->dev->bus);
1632
1633         /* increment urb's reference count as part of giving it to the HCD
1634          * (which will control it).  HCD guarantees that it either returns
1635          * an error or calls giveback(), but not both.
1636          */
1637         usb_get_urb(urb);
1638         atomic_inc(&urb->use_count);
1639         atomic_inc(&urb->dev->urbnum);
1640         usbmon_urb_submit(&hcd->self, urb);
1641
1642         /* NOTE requirements on root-hub callers (usbfs and the hub
1643          * driver, for now):  URBs' urb->transfer_buffer must be
1644          * valid and usb_buffer_{sync,unmap}() not be needed, since
1645          * they could clobber root hub response data.  Also, control
1646          * URBs must be submitted in process context with interrupts
1647          * enabled.
1648          */
1649
1650         if (is_root_hub(urb->dev)) {
1651                 status = rh_urb_enqueue(hcd, urb);
1652         } else {
1653                 status = map_urb_for_dma(hcd, urb, mem_flags);
1654                 if (likely(status == 0)) {
1655                         status = hcd->driver->urb_enqueue(hcd, urb, mem_flags);
1656                         if (unlikely(status))
1657                                 unmap_urb_for_dma(hcd, urb);
1658                 }
1659         }
1660
1661         if (unlikely(status)) {
1662                 usbmon_urb_submit_error(&hcd->self, urb, status);
1663                 urb->hcpriv = NULL;
1664                 INIT_LIST_HEAD(&urb->urb_list);
1665                 atomic_dec(&urb->use_count);
1666                 atomic_dec(&urb->dev->urbnum);
1667                 if (atomic_read(&urb->reject))
1668                         wake_up(&usb_kill_urb_queue);
1669                 usb_put_urb(urb);
1670         }
1671         return status;
1672 }
1673
1674 /*-------------------------------------------------------------------------*/
1675
1676 /* this makes the hcd giveback() the urb more quickly, by kicking it
1677  * off hardware queues (which may take a while) and returning it as
1678  * soon as practical.  we've already set up the urb's return status,
1679  * but we can't know if the callback completed already.
1680  */
1681 static int unlink1(struct usb_hcd *hcd, struct urb *urb, int status)
1682 {
1683         int             value;
1684
1685         if (is_root_hub(urb->dev))
1686                 value = usb_rh_urb_dequeue(hcd, urb, status);
1687         else {
1688
1689                 /* The only reason an HCD might fail this call is if
1690                  * it has not yet fully queued the urb to begin with.
1691                  * Such failures should be harmless. */
1692                 value = hcd->driver->urb_dequeue(hcd, urb, status);
1693         }
1694         return value;
1695 }
1696
1697 /*
1698  * called in any context
1699  *
1700  * caller guarantees urb won't be recycled till both unlink()
1701  * and the urb's completion function return
1702  */
1703 int usb_hcd_unlink_urb (struct urb *urb, int status)
1704 {
1705         struct usb_hcd          *hcd;
1706         struct usb_device       *udev = urb->dev;
1707         int                     retval = -EIDRM;
1708         unsigned long           flags;
1709
1710         /* Prevent the device and bus from going away while
1711          * the unlink is carried out.  If they are already gone
1712          * then urb->use_count must be 0, since disconnected
1713          * devices can't have any active URBs.
1714          */
1715         spin_lock_irqsave(&hcd_urb_unlink_lock, flags);
1716         if (atomic_read(&urb->use_count) > 0) {
1717                 retval = 0;
1718                 usb_get_dev(udev);
1719         }
1720         spin_unlock_irqrestore(&hcd_urb_unlink_lock, flags);
1721         if (retval == 0) {
1722                 hcd = bus_to_hcd(urb->dev->bus);
1723                 retval = unlink1(hcd, urb, status);
1724                 if (retval == 0)
1725                         retval = -EINPROGRESS;
1726                 else if (retval != -EIDRM && retval != -EBUSY)
1727                         dev_dbg(&udev->dev, "hcd_unlink_urb %pK fail %d\n",
1728                                         urb, retval);
1729                 usb_put_dev(udev);
1730         }
1731         return retval;
1732 }
1733
1734 /*-------------------------------------------------------------------------*/
1735
1736 static void __usb_hcd_giveback_urb(struct urb *urb)
1737 {
1738         struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
1739         struct usb_anchor *anchor = urb->anchor;
1740         int status = urb->unlinked;
1741
1742         urb->hcpriv = NULL;
1743         if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) &&
1744             urb->actual_length < urb->transfer_buffer_length &&
1745             !status))
1746                 status = -EREMOTEIO;
1747
1748         unmap_urb_for_dma(hcd, urb);
1749         usbmon_urb_complete(&hcd->self, urb, status);
1750         usb_anchor_suspend_wakeups(anchor);
1751         usb_unanchor_urb(urb);
1752         if (likely(status == 0))
1753                 usb_led_activity(USB_LED_EVENT_HOST);
1754
1755         /* pass ownership to the completion handler */
1756         urb->status = status;
1757         urb->complete(urb);
1758
1759         usb_anchor_resume_wakeups(anchor);
1760         atomic_dec(&urb->use_count);
1761         if (unlikely(atomic_read(&urb->reject)))
1762                 wake_up(&usb_kill_urb_queue);
1763         usb_put_urb(urb);
1764 }
1765
1766 static void usb_giveback_urb_bh(unsigned long param)
1767 {
1768         struct giveback_urb_bh *bh = (struct giveback_urb_bh *)param;
1769         struct list_head local_list;
1770
1771         spin_lock_irq(&bh->lock);
1772         bh->running = true;
1773  restart:
1774         list_replace_init(&bh->head, &local_list);
1775         spin_unlock_irq(&bh->lock);
1776
1777         while (!list_empty(&local_list)) {
1778                 struct urb *urb;
1779
1780                 urb = list_entry(local_list.next, struct urb, urb_list);
1781                 list_del_init(&urb->urb_list);
1782                 bh->completing_ep = urb->ep;
1783                 __usb_hcd_giveback_urb(urb);
1784                 bh->completing_ep = NULL;
1785         }
1786
1787         /* check if there are new URBs to giveback */
1788         spin_lock_irq(&bh->lock);
1789         if (!list_empty(&bh->head))
1790                 goto restart;
1791         bh->running = false;
1792         spin_unlock_irq(&bh->lock);
1793 }
1794
1795 /**
1796  * usb_hcd_giveback_urb - return URB from HCD to device driver
1797  * @hcd: host controller returning the URB
1798  * @urb: urb being returned to the USB device driver.
1799  * @status: completion status code for the URB.
1800  * Context: in_interrupt()
1801  *
1802  * This hands the URB from HCD to its USB device driver, using its
1803  * completion function.  The HCD has freed all per-urb resources
1804  * (and is done using urb->hcpriv).  It also released all HCD locks;
1805  * the device driver won't cause problems if it frees, modifies,
1806  * or resubmits this URB.
1807  *
1808  * If @urb was unlinked, the value of @status will be overridden by
1809  * @urb->unlinked.  Erroneous short transfers are detected in case
1810  * the HCD hasn't checked for them.
1811  */
1812 void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status)
1813 {
1814         struct giveback_urb_bh *bh;
1815         bool running, high_prio_bh;
1816
1817         /* pass status to tasklet via unlinked */
1818         if (likely(!urb->unlinked))
1819                 urb->unlinked = status;
1820
1821         if (!hcd_giveback_urb_in_bh(hcd) && !is_root_hub(urb->dev)) {
1822                 __usb_hcd_giveback_urb(urb);
1823                 return;
1824         }
1825
1826         if (usb_pipeisoc(urb->pipe) || usb_pipeint(urb->pipe)) {
1827                 bh = &hcd->high_prio_bh;
1828                 high_prio_bh = true;
1829         } else {
1830                 bh = &hcd->low_prio_bh;
1831                 high_prio_bh = false;
1832         }
1833
1834         spin_lock(&bh->lock);
1835         list_add_tail(&urb->urb_list, &bh->head);
1836         running = bh->running;
1837         spin_unlock(&bh->lock);
1838
1839         if (running)
1840                 ;
1841         else if (high_prio_bh)
1842                 tasklet_hi_schedule(&bh->bh);
1843         else
1844                 tasklet_schedule(&bh->bh);
1845 }
1846 EXPORT_SYMBOL_GPL(usb_hcd_giveback_urb);
1847
1848 /*-------------------------------------------------------------------------*/
1849
1850 /* Cancel all URBs pending on this endpoint and wait for the endpoint's
1851  * queue to drain completely.  The caller must first insure that no more
1852  * URBs can be submitted for this endpoint.
1853  */
1854 void usb_hcd_flush_endpoint(struct usb_device *udev,
1855                 struct usb_host_endpoint *ep)
1856 {
1857         struct usb_hcd          *hcd;
1858         struct urb              *urb;
1859
1860         if (!ep)
1861                 return;
1862         might_sleep();
1863         hcd = bus_to_hcd(udev->bus);
1864
1865         /* No more submits can occur */
1866         spin_lock_irq(&hcd_urb_list_lock);
1867 rescan:
1868         list_for_each_entry_reverse(urb, &ep->urb_list, urb_list) {
1869                 int     is_in;
1870
1871                 if (urb->unlinked)
1872                         continue;
1873                 usb_get_urb (urb);
1874                 is_in = usb_urb_dir_in(urb);
1875                 spin_unlock(&hcd_urb_list_lock);
1876
1877                 /* kick hcd */
1878                 unlink1(hcd, urb, -ESHUTDOWN);
1879                 dev_dbg (hcd->self.controller,
1880                         "shutdown urb %pK ep%d%s-%s\n",
1881                         urb, usb_endpoint_num(&ep->desc),
1882                         is_in ? "in" : "out",
1883                         usb_ep_type_string(usb_endpoint_type(&ep->desc)));
1884                 usb_put_urb (urb);
1885
1886                 /* list contents may have changed */
1887                 spin_lock(&hcd_urb_list_lock);
1888                 goto rescan;
1889         }
1890         spin_unlock_irq(&hcd_urb_list_lock);
1891
1892         /* Wait until the endpoint queue is completely empty */
1893         while (!list_empty (&ep->urb_list)) {
1894                 spin_lock_irq(&hcd_urb_list_lock);
1895
1896                 /* The list may have changed while we acquired the spinlock */
1897                 urb = NULL;
1898                 if (!list_empty (&ep->urb_list)) {
1899                         urb = list_entry (ep->urb_list.prev, struct urb,
1900                                         urb_list);
1901                         usb_get_urb (urb);
1902                 }
1903                 spin_unlock_irq(&hcd_urb_list_lock);
1904
1905                 if (urb) {
1906                         usb_kill_urb (urb);
1907                         usb_put_urb (urb);
1908                 }
1909         }
1910 }
1911
1912 /**
1913  * usb_hcd_alloc_bandwidth - check whether a new bandwidth setting exceeds
1914  *                              the bus bandwidth
1915  * @udev: target &usb_device
1916  * @new_config: new configuration to install
1917  * @cur_alt: the current alternate interface setting
1918  * @new_alt: alternate interface setting that is being installed
1919  *
1920  * To change configurations, pass in the new configuration in new_config,
1921  * and pass NULL for cur_alt and new_alt.
1922  *
1923  * To reset a device's configuration (put the device in the ADDRESSED state),
1924  * pass in NULL for new_config, cur_alt, and new_alt.
1925  *
1926  * To change alternate interface settings, pass in NULL for new_config,
1927  * pass in the current alternate interface setting in cur_alt,
1928  * and pass in the new alternate interface setting in new_alt.
1929  *
1930  * Return: An error if the requested bandwidth change exceeds the
1931  * bus bandwidth or host controller internal resources.
1932  */
1933 int usb_hcd_alloc_bandwidth(struct usb_device *udev,
1934                 struct usb_host_config *new_config,
1935                 struct usb_host_interface *cur_alt,
1936                 struct usb_host_interface *new_alt)
1937 {
1938         int num_intfs, i, j;
1939         struct usb_host_interface *alt = NULL;
1940         int ret = 0;
1941         struct usb_hcd *hcd;
1942         struct usb_host_endpoint *ep;
1943
1944         hcd = bus_to_hcd(udev->bus);
1945         if (!hcd->driver->check_bandwidth)
1946                 return 0;
1947
1948         /* Configuration is being removed - set configuration 0 */
1949         if (!new_config && !cur_alt) {
1950                 for (i = 1; i < 16; ++i) {
1951                         ep = udev->ep_out[i];
1952                         if (ep)
1953                                 hcd->driver->drop_endpoint(hcd, udev, ep);
1954                         ep = udev->ep_in[i];
1955                         if (ep)
1956                                 hcd->driver->drop_endpoint(hcd, udev, ep);
1957                 }
1958                 hcd->driver->check_bandwidth(hcd, udev);
1959                 return 0;
1960         }
1961         /* Check if the HCD says there's enough bandwidth.  Enable all endpoints
1962          * each interface's alt setting 0 and ask the HCD to check the bandwidth
1963          * of the bus.  There will always be bandwidth for endpoint 0, so it's
1964          * ok to exclude it.
1965          */
1966         if (new_config) {
1967                 num_intfs = new_config->desc.bNumInterfaces;
1968                 /* Remove endpoints (except endpoint 0, which is always on the
1969                  * schedule) from the old config from the schedule
1970                  */
1971                 for (i = 1; i < 16; ++i) {
1972                         ep = udev->ep_out[i];
1973                         if (ep) {
1974                                 ret = hcd->driver->drop_endpoint(hcd, udev, ep);
1975                                 if (ret < 0)
1976                                         goto reset;
1977                         }
1978                         ep = udev->ep_in[i];
1979                         if (ep) {
1980                                 ret = hcd->driver->drop_endpoint(hcd, udev, ep);
1981                                 if (ret < 0)
1982                                         goto reset;
1983                         }
1984                 }
1985                 for (i = 0; i < num_intfs; ++i) {
1986                         struct usb_host_interface *first_alt;
1987                         int iface_num;
1988
1989                         first_alt = &new_config->intf_cache[i]->altsetting[0];
1990                         iface_num = first_alt->desc.bInterfaceNumber;
1991                         /* Set up endpoints for alternate interface setting 0 */
1992                         alt = usb_find_alt_setting(new_config, iface_num, 0);
1993                         if (!alt)
1994                                 /* No alt setting 0? Pick the first setting. */
1995                                 alt = first_alt;
1996
1997                         for (j = 0; j < alt->desc.bNumEndpoints; j++) {
1998                                 ret = hcd->driver->add_endpoint(hcd, udev, &alt->endpoint[j]);
1999                                 if (ret < 0)
2000                                         goto reset;
2001                         }
2002                 }
2003         }
2004         if (cur_alt && new_alt) {
2005                 struct usb_interface *iface = usb_ifnum_to_if(udev,
2006                                 cur_alt->desc.bInterfaceNumber);
2007
2008                 if (!iface)
2009                         return -EINVAL;
2010                 if (iface->resetting_device) {
2011                         /*
2012                          * The USB core just reset the device, so the xHCI host
2013                          * and the device will think alt setting 0 is installed.
2014                          * However, the USB core will pass in the alternate
2015                          * setting installed before the reset as cur_alt.  Dig
2016                          * out the alternate setting 0 structure, or the first
2017                          * alternate setting if a broken device doesn't have alt
2018                          * setting 0.
2019                          */
2020                         cur_alt = usb_altnum_to_altsetting(iface, 0);
2021                         if (!cur_alt)
2022                                 cur_alt = &iface->altsetting[0];
2023                 }
2024
2025                 /* Drop all the endpoints in the current alt setting */
2026                 for (i = 0; i < cur_alt->desc.bNumEndpoints; i++) {
2027                         ret = hcd->driver->drop_endpoint(hcd, udev,
2028                                         &cur_alt->endpoint[i]);
2029                         if (ret < 0)
2030                                 goto reset;
2031                 }
2032                 /* Add all the endpoints in the new alt setting */
2033                 for (i = 0; i < new_alt->desc.bNumEndpoints; i++) {
2034                         ret = hcd->driver->add_endpoint(hcd, udev,
2035                                         &new_alt->endpoint[i]);
2036                         if (ret < 0)
2037                                 goto reset;
2038                 }
2039         }
2040         ret = hcd->driver->check_bandwidth(hcd, udev);
2041 reset:
2042         if (ret < 0)
2043                 hcd->driver->reset_bandwidth(hcd, udev);
2044         return ret;
2045 }
2046
2047 /* Disables the endpoint: synchronizes with the hcd to make sure all
2048  * endpoint state is gone from hardware.  usb_hcd_flush_endpoint() must
2049  * have been called previously.  Use for set_configuration, set_interface,
2050  * driver removal, physical disconnect.
2051  *
2052  * example:  a qh stored in ep->hcpriv, holding state related to endpoint
2053  * type, maxpacket size, toggle, halt status, and scheduling.
2054  */
2055 void usb_hcd_disable_endpoint(struct usb_device *udev,
2056                 struct usb_host_endpoint *ep)
2057 {
2058         struct usb_hcd          *hcd;
2059
2060         might_sleep();
2061         hcd = bus_to_hcd(udev->bus);
2062         if (hcd->driver->endpoint_disable)
2063                 hcd->driver->endpoint_disable(hcd, ep);
2064 }
2065
2066 /**
2067  * usb_hcd_reset_endpoint - reset host endpoint state
2068  * @udev: USB device.
2069  * @ep:   the endpoint to reset.
2070  *
2071  * Resets any host endpoint state such as the toggle bit, sequence
2072  * number and current window.
2073  */
2074 void usb_hcd_reset_endpoint(struct usb_device *udev,
2075                             struct usb_host_endpoint *ep)
2076 {
2077         struct usb_hcd *hcd = bus_to_hcd(udev->bus);
2078
2079         if (hcd->driver->endpoint_reset)
2080                 hcd->driver->endpoint_reset(hcd, ep);
2081         else {
2082                 int epnum = usb_endpoint_num(&ep->desc);
2083                 int is_out = usb_endpoint_dir_out(&ep->desc);
2084                 int is_control = usb_endpoint_xfer_control(&ep->desc);
2085
2086                 usb_settoggle(udev, epnum, is_out, 0);
2087                 if (is_control)
2088                         usb_settoggle(udev, epnum, !is_out, 0);
2089         }
2090 }
2091
2092 /**
2093  * usb_alloc_streams - allocate bulk endpoint stream IDs.
2094  * @interface:          alternate setting that includes all endpoints.
2095  * @eps:                array of endpoints that need streams.
2096  * @num_eps:            number of endpoints in the array.
2097  * @num_streams:        number of streams to allocate.
2098  * @mem_flags:          flags hcd should use to allocate memory.
2099  *
2100  * Sets up a group of bulk endpoints to have @num_streams stream IDs available.
2101  * Drivers may queue multiple transfers to different stream IDs, which may
2102  * complete in a different order than they were queued.
2103  *
2104  * Return: On success, the number of allocated streams. On failure, a negative
2105  * error code.
2106  */
2107 int usb_alloc_streams(struct usb_interface *interface,
2108                 struct usb_host_endpoint **eps, unsigned int num_eps,
2109                 unsigned int num_streams, gfp_t mem_flags)
2110 {
2111         struct usb_hcd *hcd;
2112         struct usb_device *dev;
2113         int i, ret;
2114
2115         dev = interface_to_usbdev(interface);
2116         hcd = bus_to_hcd(dev->bus);
2117         if (!hcd->driver->alloc_streams || !hcd->driver->free_streams)
2118                 return -EINVAL;
2119         if (dev->speed < USB_SPEED_SUPER)
2120                 return -EINVAL;
2121         if (dev->state < USB_STATE_CONFIGURED)
2122                 return -ENODEV;
2123
2124         for (i = 0; i < num_eps; i++) {
2125                 /* Streams only apply to bulk endpoints. */
2126                 if (!usb_endpoint_xfer_bulk(&eps[i]->desc))
2127                         return -EINVAL;
2128                 /* Re-alloc is not allowed */
2129                 if (eps[i]->streams)
2130                         return -EINVAL;
2131         }
2132
2133         ret = hcd->driver->alloc_streams(hcd, dev, eps, num_eps,
2134                         num_streams, mem_flags);
2135         if (ret < 0)
2136                 return ret;
2137
2138         for (i = 0; i < num_eps; i++)
2139                 eps[i]->streams = ret;
2140
2141         return ret;
2142 }
2143 EXPORT_SYMBOL_GPL(usb_alloc_streams);
2144
2145 /**
2146  * usb_free_streams - free bulk endpoint stream IDs.
2147  * @interface:  alternate setting that includes all endpoints.
2148  * @eps:        array of endpoints to remove streams from.
2149  * @num_eps:    number of endpoints in the array.
2150  * @mem_flags:  flags hcd should use to allocate memory.
2151  *
2152  * Reverts a group of bulk endpoints back to not using stream IDs.
2153  * Can fail if we are given bad arguments, or HCD is broken.
2154  *
2155  * Return: 0 on success. On failure, a negative error code.
2156  */
2157 int usb_free_streams(struct usb_interface *interface,
2158                 struct usb_host_endpoint **eps, unsigned int num_eps,
2159                 gfp_t mem_flags)
2160 {
2161         struct usb_hcd *hcd;
2162         struct usb_device *dev;
2163         int i, ret;
2164
2165         dev = interface_to_usbdev(interface);
2166         hcd = bus_to_hcd(dev->bus);
2167         if (dev->speed < USB_SPEED_SUPER)
2168                 return -EINVAL;
2169
2170         /* Double-free is not allowed */
2171         for (i = 0; i < num_eps; i++)
2172                 if (!eps[i] || !eps[i]->streams)
2173                         return -EINVAL;
2174
2175         ret = hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags);
2176         if (ret < 0)
2177                 return ret;
2178
2179         for (i = 0; i < num_eps; i++)
2180                 eps[i]->streams = 0;
2181
2182         return ret;
2183 }
2184 EXPORT_SYMBOL_GPL(usb_free_streams);
2185
2186 /* Protect against drivers that try to unlink URBs after the device
2187  * is gone, by waiting until all unlinks for @udev are finished.
2188  * Since we don't currently track URBs by device, simply wait until
2189  * nothing is running in the locked region of usb_hcd_unlink_urb().
2190  */
2191 void usb_hcd_synchronize_unlinks(struct usb_device *udev)
2192 {
2193         spin_lock_irq(&hcd_urb_unlink_lock);
2194         spin_unlock_irq(&hcd_urb_unlink_lock);
2195 }
2196
2197 /*-------------------------------------------------------------------------*/
2198
2199 /* called in any context */
2200 int usb_hcd_get_frame_number (struct usb_device *udev)
2201 {
2202         struct usb_hcd  *hcd = bus_to_hcd(udev->bus);
2203
2204         if (!HCD_RH_RUNNING(hcd))
2205                 return -ESHUTDOWN;
2206         return hcd->driver->get_frame_number (hcd);
2207 }
2208
2209 /*-------------------------------------------------------------------------*/
2210
2211 #ifdef  CONFIG_PM
2212
2213 int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
2214 {
2215         struct usb_hcd  *hcd = bus_to_hcd(rhdev->bus);
2216         int             status;
2217         int             old_state = hcd->state;
2218
2219         dev_dbg(&rhdev->dev, "bus %ssuspend, wakeup %d\n",
2220                         (PMSG_IS_AUTO(msg) ? "auto-" : ""),
2221                         rhdev->do_remote_wakeup);
2222         if (HCD_DEAD(hcd)) {
2223                 dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "suspend");
2224                 return 0;
2225         }
2226
2227         if (!hcd->driver->bus_suspend) {
2228                 status = -ENOENT;
2229         } else {
2230                 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2231                 hcd->state = HC_STATE_QUIESCING;
2232                 status = hcd->driver->bus_suspend(hcd);
2233         }
2234         if (status == 0) {
2235                 usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
2236                 hcd->state = HC_STATE_SUSPENDED;
2237
2238                 if (!PMSG_IS_AUTO(msg))
2239                         usb_phy_roothub_suspend(hcd->self.sysdev,
2240                                                 hcd->phy_roothub);
2241
2242                 /* Did we race with a root-hub wakeup event? */
2243                 if (rhdev->do_remote_wakeup) {
2244                         char    buffer[6];
2245
2246                         status = hcd->driver->hub_status_data(hcd, buffer);
2247                         if (status != 0) {
2248                                 dev_dbg(&rhdev->dev, "suspend raced with wakeup event\n");
2249                                 hcd_bus_resume(rhdev, PMSG_AUTO_RESUME);
2250                                 status = -EBUSY;
2251                         }
2252                 }
2253         } else {
2254                 spin_lock_irq(&hcd_root_hub_lock);
2255                 if (!HCD_DEAD(hcd)) {
2256                         set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2257                         hcd->state = old_state;
2258                 }
2259                 spin_unlock_irq(&hcd_root_hub_lock);
2260                 dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
2261                                 "suspend", status);
2262         }
2263         return status;
2264 }
2265
2266 int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
2267 {
2268         struct usb_hcd  *hcd = bus_to_hcd(rhdev->bus);
2269         int             status;
2270         int             old_state = hcd->state;
2271
2272         dev_dbg(&rhdev->dev, "usb %sresume\n",
2273                         (PMSG_IS_AUTO(msg) ? "auto-" : ""));
2274         if (HCD_DEAD(hcd)) {
2275                 dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "resume");
2276                 return 0;
2277         }
2278
2279         if (!PMSG_IS_AUTO(msg)) {
2280                 status = usb_phy_roothub_resume(hcd->self.sysdev,
2281                                                 hcd->phy_roothub);
2282                 if (status)
2283                         return status;
2284         }
2285
2286         if (!hcd->driver->bus_resume)
2287                 return -ENOENT;
2288         if (HCD_RH_RUNNING(hcd))
2289                 return 0;
2290
2291         hcd->state = HC_STATE_RESUMING;
2292         status = hcd->driver->bus_resume(hcd);
2293         clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
2294         if (status == 0) {
2295                 struct usb_device *udev;
2296                 int port1;
2297
2298                 spin_lock_irq(&hcd_root_hub_lock);
2299                 if (!HCD_DEAD(hcd)) {
2300                         usb_set_device_state(rhdev, rhdev->actconfig
2301                                         ? USB_STATE_CONFIGURED
2302                                         : USB_STATE_ADDRESS);
2303                         set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2304                         hcd->state = HC_STATE_RUNNING;
2305                 }
2306                 spin_unlock_irq(&hcd_root_hub_lock);
2307
2308                 /*
2309                  * Check whether any of the enabled ports on the root hub are
2310                  * unsuspended.  If they are then a TRSMRCY delay is needed
2311                  * (this is what the USB-2 spec calls a "global resume").
2312                  * Otherwise we can skip the delay.
2313                  */
2314                 usb_hub_for_each_child(rhdev, port1, udev) {
2315                         if (udev->state != USB_STATE_NOTATTACHED &&
2316                                         !udev->port_is_suspended) {
2317                                 usleep_range(10000, 11000);     /* TRSMRCY */
2318                                 break;
2319                         }
2320                 }
2321         } else {
2322                 hcd->state = old_state;
2323                 usb_phy_roothub_suspend(hcd->self.sysdev, hcd->phy_roothub);
2324                 dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
2325                                 "resume", status);
2326                 if (status != -ESHUTDOWN)
2327                         usb_hc_died(hcd);
2328         }
2329         return status;
2330 }
2331
2332 /* Workqueue routine for root-hub remote wakeup */
2333 static void hcd_resume_work(struct work_struct *work)
2334 {
2335         struct usb_hcd *hcd = container_of(work, struct usb_hcd, wakeup_work);
2336         struct usb_device *udev = hcd->self.root_hub;
2337
2338         usb_remote_wakeup(udev);
2339 }
2340
2341 /**
2342  * usb_hcd_resume_root_hub - called by HCD to resume its root hub
2343  * @hcd: host controller for this root hub
2344  *
2345  * The USB host controller calls this function when its root hub is
2346  * suspended (with the remote wakeup feature enabled) and a remote
2347  * wakeup request is received.  The routine submits a workqueue request
2348  * to resume the root hub (that is, manage its downstream ports again).
2349  */
2350 void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
2351 {
2352         unsigned long flags;
2353
2354         spin_lock_irqsave (&hcd_root_hub_lock, flags);
2355         if (hcd->rh_registered) {
2356                 pm_wakeup_event(&hcd->self.root_hub->dev, 0);
2357                 set_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
2358                 queue_work(pm_wq, &hcd->wakeup_work);
2359         }
2360         spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
2361 }
2362 EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
2363
2364 #endif  /* CONFIG_PM */
2365
2366 /*-------------------------------------------------------------------------*/
2367
2368 #ifdef  CONFIG_USB_OTG
2369
2370 /**
2371  * usb_bus_start_enum - start immediate enumeration (for OTG)
2372  * @bus: the bus (must use hcd framework)
2373  * @port_num: 1-based number of port; usually bus->otg_port
2374  * Context: in_interrupt()
2375  *
2376  * Starts enumeration, with an immediate reset followed later by
2377  * hub_wq identifying and possibly configuring the device.
2378  * This is needed by OTG controller drivers, where it helps meet
2379  * HNP protocol timing requirements for starting a port reset.
2380  *
2381  * Return: 0 if successful.
2382  */
2383 int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num)
2384 {
2385         struct usb_hcd          *hcd;
2386         int                     status = -EOPNOTSUPP;
2387
2388         /* NOTE: since HNP can't start by grabbing the bus's address0_sem,
2389          * boards with root hubs hooked up to internal devices (instead of
2390          * just the OTG port) may need more attention to resetting...
2391          */
2392         hcd = bus_to_hcd(bus);
2393         if (port_num && hcd->driver->start_port_reset)
2394                 status = hcd->driver->start_port_reset(hcd, port_num);
2395
2396         /* allocate hub_wq shortly after (first) root port reset finishes;
2397          * it may issue others, until at least 50 msecs have passed.
2398          */
2399         if (status == 0)
2400                 mod_timer(&hcd->rh_timer, jiffies + msecs_to_jiffies(10));
2401         return status;
2402 }
2403 EXPORT_SYMBOL_GPL(usb_bus_start_enum);
2404
2405 #endif
2406
2407 /*-------------------------------------------------------------------------*/
2408
2409 /**
2410  * usb_hcd_irq - hook IRQs to HCD framework (bus glue)
2411  * @irq: the IRQ being raised
2412  * @__hcd: pointer to the HCD whose IRQ is being signaled
2413  *
2414  * If the controller isn't HALTed, calls the driver's irq handler.
2415  * Checks whether the controller is now dead.
2416  *
2417  * Return: %IRQ_HANDLED if the IRQ was handled. %IRQ_NONE otherwise.
2418  */
2419 irqreturn_t usb_hcd_irq (int irq, void *__hcd)
2420 {
2421         struct usb_hcd          *hcd = __hcd;
2422         irqreturn_t             rc;
2423
2424         if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd)))
2425                 rc = IRQ_NONE;
2426         else if (hcd->driver->irq(hcd) == IRQ_NONE)
2427                 rc = IRQ_NONE;
2428         else
2429                 rc = IRQ_HANDLED;
2430
2431         return rc;
2432 }
2433 EXPORT_SYMBOL_GPL(usb_hcd_irq);
2434
2435 /*-------------------------------------------------------------------------*/
2436
2437 /* Workqueue routine for when the root-hub has died. */
2438 static void hcd_died_work(struct work_struct *work)
2439 {
2440         struct usb_hcd *hcd = container_of(work, struct usb_hcd, died_work);
2441         static char *env[] = {
2442                 "ERROR=DEAD",
2443                 NULL
2444         };
2445
2446         /* Notify user space that the host controller has died */
2447         kobject_uevent_env(&hcd->self.root_hub->dev.kobj, KOBJ_OFFLINE, env);
2448 }
2449
2450 /**
2451  * usb_hc_died - report abnormal shutdown of a host controller (bus glue)
2452  * @hcd: pointer to the HCD representing the controller
2453  *
2454  * This is called by bus glue to report a USB host controller that died
2455  * while operations may still have been pending.  It's called automatically
2456  * by the PCI glue, so only glue for non-PCI busses should need to call it.
2457  *
2458  * Only call this function with the primary HCD.
2459  */
2460 void usb_hc_died (struct usb_hcd *hcd)
2461 {
2462         unsigned long flags;
2463
2464         dev_err (hcd->self.controller, "HC died; cleaning up\n");
2465
2466         spin_lock_irqsave (&hcd_root_hub_lock, flags);
2467         clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2468         set_bit(HCD_FLAG_DEAD, &hcd->flags);
2469         if (hcd->rh_registered) {
2470                 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2471
2472                 /* make hub_wq clean up old urbs and devices */
2473                 usb_set_device_state (hcd->self.root_hub,
2474                                 USB_STATE_NOTATTACHED);
2475                 usb_kick_hub_wq(hcd->self.root_hub);
2476         }
2477         if (usb_hcd_is_primary_hcd(hcd) && hcd->shared_hcd) {
2478                 hcd = hcd->shared_hcd;
2479                 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2480                 set_bit(HCD_FLAG_DEAD, &hcd->flags);
2481                 if (hcd->rh_registered) {
2482                         clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2483
2484                         /* make hub_wq clean up old urbs and devices */
2485                         usb_set_device_state(hcd->self.root_hub,
2486                                         USB_STATE_NOTATTACHED);
2487                         usb_kick_hub_wq(hcd->self.root_hub);
2488                 }
2489         }
2490
2491         /* Handle the case where this function gets called with a shared HCD */
2492         if (usb_hcd_is_primary_hcd(hcd))
2493                 schedule_work(&hcd->died_work);
2494         else
2495                 schedule_work(&hcd->primary_hcd->died_work);
2496
2497         spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
2498         /* Make sure that the other roothub is also deallocated. */
2499 }
2500 EXPORT_SYMBOL_GPL (usb_hc_died);
2501
2502 /*-------------------------------------------------------------------------*/
2503
2504 static void init_giveback_urb_bh(struct giveback_urb_bh *bh)
2505 {
2506
2507         spin_lock_init(&bh->lock);
2508         INIT_LIST_HEAD(&bh->head);
2509         tasklet_init(&bh->bh, usb_giveback_urb_bh, (unsigned long)bh);
2510 }
2511
2512 struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver,
2513                 struct device *sysdev, struct device *dev, const char *bus_name,
2514                 struct usb_hcd *primary_hcd)
2515 {
2516         struct usb_hcd *hcd;
2517
2518         hcd = kzalloc(sizeof(*hcd) + driver->hcd_priv_size, GFP_KERNEL);
2519         if (!hcd)
2520                 return NULL;
2521         if (primary_hcd == NULL) {
2522                 hcd->address0_mutex = kmalloc(sizeof(*hcd->address0_mutex),
2523                                 GFP_KERNEL);
2524                 if (!hcd->address0_mutex) {
2525                         kfree(hcd);
2526                         dev_dbg(dev, "hcd address0 mutex alloc failed\n");
2527                         return NULL;
2528                 }
2529                 mutex_init(hcd->address0_mutex);
2530                 hcd->bandwidth_mutex = kmalloc(sizeof(*hcd->bandwidth_mutex),
2531                                 GFP_KERNEL);
2532                 if (!hcd->bandwidth_mutex) {
2533                         kfree(hcd->address0_mutex);
2534                         kfree(hcd);
2535                         dev_dbg(dev, "hcd bandwidth mutex alloc failed\n");
2536                         return NULL;
2537                 }
2538                 mutex_init(hcd->bandwidth_mutex);
2539                 dev_set_drvdata(dev, hcd);
2540         } else {
2541                 mutex_lock(&usb_port_peer_mutex);
2542                 hcd->address0_mutex = primary_hcd->address0_mutex;
2543                 hcd->bandwidth_mutex = primary_hcd->bandwidth_mutex;
2544                 hcd->primary_hcd = primary_hcd;
2545                 primary_hcd->primary_hcd = primary_hcd;
2546                 hcd->shared_hcd = primary_hcd;
2547                 primary_hcd->shared_hcd = hcd;
2548                 mutex_unlock(&usb_port_peer_mutex);
2549         }
2550
2551         kref_init(&hcd->kref);
2552
2553         usb_bus_init(&hcd->self);
2554         hcd->self.controller = dev;
2555         hcd->self.sysdev = sysdev;
2556         hcd->self.bus_name = bus_name;
2557         hcd->self.uses_dma = (sysdev->dma_mask != NULL);
2558
2559         timer_setup(&hcd->rh_timer, rh_timer_func, 0);
2560 #ifdef CONFIG_PM
2561         INIT_WORK(&hcd->wakeup_work, hcd_resume_work);
2562 #endif
2563
2564         INIT_WORK(&hcd->died_work, hcd_died_work);
2565
2566         hcd->driver = driver;
2567         hcd->speed = driver->flags & HCD_MASK;
2568         hcd->product_desc = (driver->product_desc) ? driver->product_desc :
2569                         "USB Host Controller";
2570         return hcd;
2571 }
2572 EXPORT_SYMBOL_GPL(__usb_create_hcd);
2573
2574 /**
2575  * usb_create_shared_hcd - create and initialize an HCD structure
2576  * @driver: HC driver that will use this hcd
2577  * @dev: device for this HC, stored in hcd->self.controller
2578  * @bus_name: value to store in hcd->self.bus_name
2579  * @primary_hcd: a pointer to the usb_hcd structure that is sharing the
2580  *              PCI device.  Only allocate certain resources for the primary HCD
2581  * Context: !in_interrupt()
2582  *
2583  * Allocate a struct usb_hcd, with extra space at the end for the
2584  * HC driver's private data.  Initialize the generic members of the
2585  * hcd structure.
2586  *
2587  * Return: On success, a pointer to the created and initialized HCD structure.
2588  * On failure (e.g. if memory is unavailable), %NULL.
2589  */
2590 struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
2591                 struct device *dev, const char *bus_name,
2592                 struct usb_hcd *primary_hcd)
2593 {
2594         return __usb_create_hcd(driver, dev, dev, bus_name, primary_hcd);
2595 }
2596 EXPORT_SYMBOL_GPL(usb_create_shared_hcd);
2597
2598 /**
2599  * usb_create_hcd - create and initialize an HCD structure
2600  * @driver: HC driver that will use this hcd
2601  * @dev: device for this HC, stored in hcd->self.controller
2602  * @bus_name: value to store in hcd->self.bus_name
2603  * Context: !in_interrupt()
2604  *
2605  * Allocate a struct usb_hcd, with extra space at the end for the
2606  * HC driver's private data.  Initialize the generic members of the
2607  * hcd structure.
2608  *
2609  * Return: On success, a pointer to the created and initialized HCD
2610  * structure. On failure (e.g. if memory is unavailable), %NULL.
2611  */
2612 struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
2613                 struct device *dev, const char *bus_name)
2614 {
2615         return __usb_create_hcd(driver, dev, dev, bus_name, NULL);
2616 }
2617 EXPORT_SYMBOL_GPL(usb_create_hcd);
2618
2619 /*
2620  * Roothubs that share one PCI device must also share the bandwidth mutex.
2621  * Don't deallocate the bandwidth_mutex until the last shared usb_hcd is
2622  * deallocated.
2623  *
2624  * Make sure to deallocate the bandwidth_mutex only when the last HCD is
2625  * freed.  When hcd_release() is called for either hcd in a peer set,
2626  * invalidate the peer's ->shared_hcd and ->primary_hcd pointers.
2627  */
2628 static void hcd_release(struct kref *kref)
2629 {
2630         struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref);
2631
2632         mutex_lock(&usb_port_peer_mutex);
2633         if (hcd->shared_hcd) {
2634                 struct usb_hcd *peer = hcd->shared_hcd;
2635
2636                 peer->shared_hcd = NULL;
2637                 peer->primary_hcd = NULL;
2638         } else {
2639                 kfree(hcd->address0_mutex);
2640                 kfree(hcd->bandwidth_mutex);
2641         }
2642         mutex_unlock(&usb_port_peer_mutex);
2643         kfree(hcd);
2644 }
2645
2646 struct usb_hcd *usb_get_hcd (struct usb_hcd *hcd)
2647 {
2648         if (hcd)
2649                 kref_get (&hcd->kref);
2650         return hcd;
2651 }
2652 EXPORT_SYMBOL_GPL(usb_get_hcd);
2653
2654 void usb_put_hcd (struct usb_hcd *hcd)
2655 {
2656         if (hcd)
2657                 kref_put (&hcd->kref, hcd_release);
2658 }
2659 EXPORT_SYMBOL_GPL(usb_put_hcd);
2660
2661 int usb_hcd_is_primary_hcd(struct usb_hcd *hcd)
2662 {
2663         if (!hcd->primary_hcd)
2664                 return 1;
2665         return hcd == hcd->primary_hcd;
2666 }
2667 EXPORT_SYMBOL_GPL(usb_hcd_is_primary_hcd);
2668
2669 int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1)
2670 {
2671         if (!hcd->driver->find_raw_port_number)
2672                 return port1;
2673
2674         return hcd->driver->find_raw_port_number(hcd, port1);
2675 }
2676
2677 static int usb_hcd_request_irqs(struct usb_hcd *hcd,
2678                 unsigned int irqnum, unsigned long irqflags)
2679 {
2680         int retval;
2681
2682         if (hcd->driver->irq) {
2683
2684                 snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
2685                                 hcd->driver->description, hcd->self.busnum);
2686                 retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
2687                                 hcd->irq_descr, hcd);
2688                 if (retval != 0) {
2689                         dev_err(hcd->self.controller,
2690                                         "request interrupt %d failed\n",
2691                                         irqnum);
2692                         return retval;
2693                 }
2694                 hcd->irq = irqnum;
2695                 dev_info(hcd->self.controller, "irq %d, %s 0x%08llx\n", irqnum,
2696                                 (hcd->driver->flags & HCD_MEMORY) ?
2697                                         "io mem" : "io base",
2698                                         (unsigned long long)hcd->rsrc_start);
2699         } else {
2700                 hcd->irq = 0;
2701                 if (hcd->rsrc_start)
2702                         dev_info(hcd->self.controller, "%s 0x%08llx\n",
2703                                         (hcd->driver->flags & HCD_MEMORY) ?
2704                                         "io mem" : "io base",
2705                                         (unsigned long long)hcd->rsrc_start);
2706         }
2707         return 0;
2708 }
2709
2710 /*
2711  * Before we free this root hub, flush in-flight peering attempts
2712  * and disable peer lookups
2713  */
2714 static void usb_put_invalidate_rhdev(struct usb_hcd *hcd)
2715 {
2716         struct usb_device *rhdev;
2717
2718         mutex_lock(&usb_port_peer_mutex);
2719         rhdev = hcd->self.root_hub;
2720         hcd->self.root_hub = NULL;
2721         mutex_unlock(&usb_port_peer_mutex);
2722         usb_put_dev(rhdev);
2723 }
2724
2725 /**
2726  * usb_add_hcd - finish generic HCD structure initialization and register
2727  * @hcd: the usb_hcd structure to initialize
2728  * @irqnum: Interrupt line to allocate
2729  * @irqflags: Interrupt type flags
2730  *
2731  * Finish the remaining parts of generic HCD initialization: allocate the
2732  * buffers of consistent memory, register the bus, request the IRQ line,
2733  * and call the driver's reset() and start() routines.
2734  */
2735 int usb_add_hcd(struct usb_hcd *hcd,
2736                 unsigned int irqnum, unsigned long irqflags)
2737 {
2738         int retval;
2739         struct usb_device *rhdev;
2740
2741         if (!hcd->skip_phy_initialization && usb_hcd_is_primary_hcd(hcd)) {
2742                 hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev);
2743                 if (IS_ERR(hcd->phy_roothub))
2744                         return PTR_ERR(hcd->phy_roothub);
2745
2746                 retval = usb_phy_roothub_init(hcd->phy_roothub);
2747                 if (retval)
2748                         return retval;
2749
2750                 retval = usb_phy_roothub_set_mode(hcd->phy_roothub,
2751                                                   PHY_MODE_USB_HOST_SS);
2752                 if (retval)
2753                         retval = usb_phy_roothub_set_mode(hcd->phy_roothub,
2754                                                           PHY_MODE_USB_HOST);
2755                 if (retval)
2756                         goto err_usb_phy_roothub_power_on;
2757
2758                 retval = usb_phy_roothub_power_on(hcd->phy_roothub);
2759                 if (retval)
2760                         goto err_usb_phy_roothub_power_on;
2761         }
2762
2763         dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
2764
2765         switch (authorized_default) {
2766         case USB_AUTHORIZE_NONE:
2767                 hcd->dev_policy = USB_DEVICE_AUTHORIZE_NONE;
2768                 break;
2769
2770         case USB_AUTHORIZE_ALL:
2771                 hcd->dev_policy = USB_DEVICE_AUTHORIZE_ALL;
2772                 break;
2773
2774         case USB_AUTHORIZE_INTERNAL:
2775                 hcd->dev_policy = USB_DEVICE_AUTHORIZE_INTERNAL;
2776                 break;
2777
2778         case USB_AUTHORIZE_WIRED:
2779         default:
2780                 hcd->dev_policy = hcd->wireless ?
2781                         USB_DEVICE_AUTHORIZE_NONE : USB_DEVICE_AUTHORIZE_ALL;
2782                 break;
2783         }
2784
2785         set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
2786
2787         /* per default all interfaces are authorized */
2788         set_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
2789
2790         /* HC is in reset state, but accessible.  Now do the one-time init,
2791          * bottom up so that hcds can customize the root hubs before hub_wq
2792          * starts talking to them.  (Note, bus id is assigned early too.)
2793          */
2794         retval = hcd_buffer_create(hcd);
2795         if (retval != 0) {
2796                 dev_dbg(hcd->self.sysdev, "pool alloc failed\n");
2797                 goto err_create_buf;
2798         }
2799
2800         retval = usb_register_bus(&hcd->self);
2801         if (retval < 0)
2802                 goto err_register_bus;
2803
2804         rhdev = usb_alloc_dev(NULL, &hcd->self, 0);
2805         if (rhdev == NULL) {
2806                 dev_err(hcd->self.sysdev, "unable to allocate root hub\n");
2807                 retval = -ENOMEM;
2808                 goto err_allocate_root_hub;
2809         }
2810         mutex_lock(&usb_port_peer_mutex);
2811         hcd->self.root_hub = rhdev;
2812         mutex_unlock(&usb_port_peer_mutex);
2813
2814         rhdev->rx_lanes = 1;
2815         rhdev->tx_lanes = 1;
2816
2817         switch (hcd->speed) {
2818         case HCD_USB11:
2819                 rhdev->speed = USB_SPEED_FULL;
2820                 break;
2821         case HCD_USB2:
2822                 rhdev->speed = USB_SPEED_HIGH;
2823                 break;
2824         case HCD_USB25:
2825                 rhdev->speed = USB_SPEED_WIRELESS;
2826                 break;
2827         case HCD_USB3:
2828                 rhdev->speed = USB_SPEED_SUPER;
2829                 break;
2830         case HCD_USB32:
2831                 rhdev->rx_lanes = 2;
2832                 rhdev->tx_lanes = 2;
2833                 /* fall through */
2834         case HCD_USB31:
2835                 rhdev->speed = USB_SPEED_SUPER_PLUS;
2836                 break;
2837         default:
2838                 retval = -EINVAL;
2839                 goto err_set_rh_speed;
2840         }
2841
2842         /* wakeup flag init defaults to "everything works" for root hubs,
2843          * but drivers can override it in reset() if needed, along with
2844          * recording the overall controller's system wakeup capability.
2845          */
2846         device_set_wakeup_capable(&rhdev->dev, 1);
2847
2848         /* HCD_FLAG_RH_RUNNING doesn't matter until the root hub is
2849          * registered.  But since the controller can die at any time,
2850          * let's initialize the flag before touching the hardware.
2851          */
2852         set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2853
2854         /* "reset" is misnamed; its role is now one-time init. the controller
2855          * should already have been reset (and boot firmware kicked off etc).
2856          */
2857         if (hcd->driver->reset) {
2858                 retval = hcd->driver->reset(hcd);
2859                 if (retval < 0) {
2860                         dev_err(hcd->self.controller, "can't setup: %d\n",
2861                                         retval);
2862                         goto err_hcd_driver_setup;
2863                 }
2864         }
2865         hcd->rh_pollable = 1;
2866
2867         /* NOTE: root hub and controller capabilities may not be the same */
2868         if (device_can_wakeup(hcd->self.controller)
2869                         && device_can_wakeup(&hcd->self.root_hub->dev))
2870                 dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
2871
2872         /* initialize tasklets */
2873         init_giveback_urb_bh(&hcd->high_prio_bh);
2874         init_giveback_urb_bh(&hcd->low_prio_bh);
2875
2876         /* enable irqs just before we start the controller,
2877          * if the BIOS provides legacy PCI irqs.
2878          */
2879         if (usb_hcd_is_primary_hcd(hcd) && irqnum) {
2880                 retval = usb_hcd_request_irqs(hcd, irqnum, irqflags);
2881                 if (retval)
2882                         goto err_request_irq;
2883         }
2884
2885         hcd->state = HC_STATE_RUNNING;
2886         retval = hcd->driver->start(hcd);
2887         if (retval < 0) {
2888                 dev_err(hcd->self.controller, "startup error %d\n", retval);
2889                 goto err_hcd_driver_start;
2890         }
2891
2892         /* starting here, usbcore will pay attention to this root hub */
2893         retval = register_root_hub(hcd);
2894         if (retval != 0)
2895                 goto err_register_root_hub;
2896
2897         retval = sysfs_create_group(&rhdev->dev.kobj, &usb_bus_attr_group);
2898         if (retval < 0) {
2899                 printk(KERN_ERR "Cannot register USB bus sysfs attributes: %d\n",
2900                        retval);
2901                 goto error_create_attr_group;
2902         }
2903         if (hcd->uses_new_polling && HCD_POLL_RH(hcd))
2904                 usb_hcd_poll_rh_status(hcd);
2905
2906         return retval;
2907
2908 error_create_attr_group:
2909         clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2910         if (HC_IS_RUNNING(hcd->state))
2911                 hcd->state = HC_STATE_QUIESCING;
2912         spin_lock_irq(&hcd_root_hub_lock);
2913         hcd->rh_registered = 0;
2914         spin_unlock_irq(&hcd_root_hub_lock);
2915
2916 #ifdef CONFIG_PM
2917         cancel_work_sync(&hcd->wakeup_work);
2918 #endif
2919         cancel_work_sync(&hcd->died_work);
2920         mutex_lock(&usb_bus_idr_lock);
2921         usb_disconnect(&rhdev);         /* Sets rhdev to NULL */
2922         mutex_unlock(&usb_bus_idr_lock);
2923 err_register_root_hub:
2924         hcd->rh_pollable = 0;
2925         clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2926         del_timer_sync(&hcd->rh_timer);
2927         hcd->driver->stop(hcd);
2928         hcd->state = HC_STATE_HALT;
2929         clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2930         del_timer_sync(&hcd->rh_timer);
2931 err_hcd_driver_start:
2932         if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0)
2933                 free_irq(irqnum, hcd);
2934 err_request_irq:
2935 err_hcd_driver_setup:
2936 err_set_rh_speed:
2937         usb_put_invalidate_rhdev(hcd);
2938 err_allocate_root_hub:
2939         usb_deregister_bus(&hcd->self);
2940 err_register_bus:
2941         hcd_buffer_destroy(hcd);
2942 err_create_buf:
2943         usb_phy_roothub_power_off(hcd->phy_roothub);
2944 err_usb_phy_roothub_power_on:
2945         usb_phy_roothub_exit(hcd->phy_roothub);
2946
2947         return retval;
2948 }
2949 EXPORT_SYMBOL_GPL(usb_add_hcd);
2950
2951 /**
2952  * usb_remove_hcd - shutdown processing for generic HCDs
2953  * @hcd: the usb_hcd structure to remove
2954  * Context: !in_interrupt()
2955  *
2956  * Disconnects the root hub, then reverses the effects of usb_add_hcd(),
2957  * invoking the HCD's stop() method.
2958  */
2959 void usb_remove_hcd(struct usb_hcd *hcd)
2960 {
2961         struct usb_device *rhdev = hcd->self.root_hub;
2962
2963         dev_info(hcd->self.controller, "remove, state %x\n", hcd->state);
2964
2965         usb_get_dev(rhdev);
2966         sysfs_remove_group(&rhdev->dev.kobj, &usb_bus_attr_group);
2967
2968         clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2969         if (HC_IS_RUNNING (hcd->state))
2970                 hcd->state = HC_STATE_QUIESCING;
2971
2972         dev_dbg(hcd->self.controller, "roothub graceful disconnect\n");
2973         spin_lock_irq (&hcd_root_hub_lock);
2974         hcd->rh_registered = 0;
2975         spin_unlock_irq (&hcd_root_hub_lock);
2976
2977 #ifdef CONFIG_PM
2978         cancel_work_sync(&hcd->wakeup_work);
2979 #endif
2980         cancel_work_sync(&hcd->died_work);
2981
2982         mutex_lock(&usb_bus_idr_lock);
2983         usb_disconnect(&rhdev);         /* Sets rhdev to NULL */
2984         mutex_unlock(&usb_bus_idr_lock);
2985
2986         /*
2987          * tasklet_kill() isn't needed here because:
2988          * - driver's disconnect() called from usb_disconnect() should
2989          *   make sure its URBs are completed during the disconnect()
2990          *   callback
2991          *
2992          * - it is too late to run complete() here since driver may have
2993          *   been removed already now
2994          */
2995
2996         /* Prevent any more root-hub status calls from the timer.
2997          * The HCD might still restart the timer (if a port status change
2998          * interrupt occurs), but usb_hcd_poll_rh_status() won't invoke
2999          * the hub_status_data() callback.
3000          */
3001         hcd->rh_pollable = 0;
3002         clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
3003         del_timer_sync(&hcd->rh_timer);
3004
3005         hcd->driver->stop(hcd);
3006         hcd->state = HC_STATE_HALT;
3007
3008         /* In case the HCD restarted the timer, stop it again. */
3009         clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
3010         del_timer_sync(&hcd->rh_timer);
3011
3012         if (usb_hcd_is_primary_hcd(hcd)) {
3013                 if (hcd->irq > 0)
3014                         free_irq(hcd->irq, hcd);
3015         }
3016
3017         usb_deregister_bus(&hcd->self);
3018         hcd_buffer_destroy(hcd);
3019
3020         usb_phy_roothub_power_off(hcd->phy_roothub);
3021         usb_phy_roothub_exit(hcd->phy_roothub);
3022
3023         usb_put_invalidate_rhdev(hcd);
3024         hcd->flags = 0;
3025 }
3026 EXPORT_SYMBOL_GPL(usb_remove_hcd);
3027
3028 void
3029 usb_hcd_platform_shutdown(struct platform_device *dev)
3030 {
3031         struct usb_hcd *hcd = platform_get_drvdata(dev);
3032
3033         /* No need for pm_runtime_put(), we're shutting down */
3034         pm_runtime_get_sync(&dev->dev);
3035
3036         if (hcd->driver->shutdown)
3037                 hcd->driver->shutdown(hcd);
3038 }
3039 EXPORT_SYMBOL_GPL(usb_hcd_platform_shutdown);
3040
3041 int usb_hcd_setup_local_mem(struct usb_hcd *hcd, phys_addr_t phys_addr,
3042                             dma_addr_t dma, size_t size)
3043 {
3044         int err;
3045         void *local_mem;
3046
3047         hcd->localmem_pool = devm_gen_pool_create(hcd->self.sysdev, 4,
3048                                                   dev_to_node(hcd->self.sysdev),
3049                                                   dev_name(hcd->self.sysdev));
3050         if (IS_ERR(hcd->localmem_pool))
3051                 return PTR_ERR(hcd->localmem_pool);
3052
3053         local_mem = devm_memremap(hcd->self.sysdev, phys_addr,
3054                                   size, MEMREMAP_WC);
3055         if (IS_ERR(local_mem))
3056                 return PTR_ERR(local_mem);
3057
3058         /*
3059          * Here we pass a dma_addr_t but the arg type is a phys_addr_t.
3060          * It's not backed by system memory and thus there's no kernel mapping
3061          * for it.
3062          */
3063         err = gen_pool_add_virt(hcd->localmem_pool, (unsigned long)local_mem,
3064                                 dma, size, dev_to_node(hcd->self.sysdev));
3065         if (err < 0) {
3066                 dev_err(hcd->self.sysdev, "gen_pool_add_virt failed with %d\n",
3067                         err);
3068                 return err;
3069         }
3070
3071         return 0;
3072 }
3073 EXPORT_SYMBOL_GPL(usb_hcd_setup_local_mem);
3074
3075 /*-------------------------------------------------------------------------*/
3076
3077 #if IS_ENABLED(CONFIG_USB_MON)
3078
3079 const struct usb_mon_operations *mon_ops;
3080
3081 /*
3082  * The registration is unlocked.
3083  * We do it this way because we do not want to lock in hot paths.
3084  *
3085  * Notice that the code is minimally error-proof. Because usbmon needs
3086  * symbols from usbcore, usbcore gets referenced and cannot be unloaded first.
3087  */
3088
3089 int usb_mon_register(const struct usb_mon_operations *ops)
3090 {
3091
3092         if (mon_ops)
3093                 return -EBUSY;
3094
3095         mon_ops = ops;
3096         mb();
3097         return 0;
3098 }
3099 EXPORT_SYMBOL_GPL (usb_mon_register);
3100
3101 void usb_mon_deregister (void)
3102 {
3103
3104         if (mon_ops == NULL) {
3105                 printk(KERN_ERR "USB: monitor was not registered\n");
3106                 return;
3107         }
3108         mon_ops = NULL;
3109         mb();
3110 }
3111 EXPORT_SYMBOL_GPL (usb_mon_deregister);
3112
3113 #endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */