drivers/usb/chipidea/usbmisc_imx.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright 2012 Freescale Semiconductor, Inc.
   4  */
   5
   6 #include <linux/module.h>
   7 #include <linux/of_platform.h>
   8 #include <linux/err.h>
   9 #include <linux/io.h>
  10 #include <linux/delay.h>
  11 #include <linux/usb/otg.h>
  12
  13 #include "ci_hdrc_imx.h"
  14
  15 #define MX25_USB_PHY_CTRL_OFFSET        0x08
  16 #define MX25_BM_EXTERNAL_VBUS_DIVIDER   BIT(23)
  17
  18 #define MX25_EHCI_INTERFACE_SINGLE_UNI  (2 << 0)
  19 #define MX25_EHCI_INTERFACE_DIFF_UNI    (0 << 0)
  20 #define MX25_EHCI_INTERFACE_MASK        (0xf)
  21
  22 #define MX25_OTG_SIC_SHIFT              29
  23 #define MX25_OTG_SIC_MASK               (0x3 << MX25_OTG_SIC_SHIFT)
  24 #define MX25_OTG_PM_BIT                 BIT(24)
  25 #define MX25_OTG_PP_BIT                 BIT(11)
  26 #define MX25_OTG_OCPOL_BIT              BIT(3)
  27
  28 #define MX25_H1_SIC_SHIFT               21
  29 #define MX25_H1_SIC_MASK                (0x3 << MX25_H1_SIC_SHIFT)
  30 #define MX25_H1_PP_BIT                  BIT(18)
  31 #define MX25_H1_PM_BIT                  BIT(16)
  32 #define MX25_H1_IPPUE_UP_BIT            BIT(7)
  33 #define MX25_H1_IPPUE_DOWN_BIT          BIT(6)
  34 #define MX25_H1_TLL_BIT                 BIT(5)
  35 #define MX25_H1_USBTE_BIT               BIT(4)
  36 #define MX25_H1_OCPOL_BIT               BIT(2)
  37
  38 #define MX27_H1_PM_BIT                  BIT(8)
  39 #define MX27_H2_PM_BIT                  BIT(16)
  40 #define MX27_OTG_PM_BIT                 BIT(24)
  41
  42 #define MX53_USB_OTG_PHY_CTRL_0_OFFSET  0x08
  43 #define MX53_USB_OTG_PHY_CTRL_1_OFFSET  0x0c
  44 #define MX53_USB_CTRL_1_OFFSET          0x10
  45 #define MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_MASK (0x11 << 2)
  46 #define MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_ULPI BIT(2)
  47 #define MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_MASK (0x11 << 6)
  48 #define MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_ULPI BIT(6)
  49 #define MX53_USB_UH2_CTRL_OFFSET        0x14
  50 #define MX53_USB_UH3_CTRL_OFFSET        0x18
  51 #define MX53_USB_CLKONOFF_CTRL_OFFSET   0x24
  52 #define MX53_USB_CLKONOFF_CTRL_H2_INT60CKOFF BIT(21)
  53 #define MX53_USB_CLKONOFF_CTRL_H3_INT60CKOFF BIT(22)
  54 #define MX53_BM_OVER_CUR_DIS_H1         BIT(5)
  55 #define MX53_BM_OVER_CUR_DIS_OTG        BIT(8)
  56 #define MX53_BM_OVER_CUR_DIS_UHx        BIT(30)
  57 #define MX53_USB_CTRL_1_UH2_ULPI_EN     BIT(26)
  58 #define MX53_USB_CTRL_1_UH3_ULPI_EN     BIT(27)
  59 #define MX53_USB_UHx_CTRL_WAKE_UP_EN    BIT(7)
  60 #define MX53_USB_UHx_CTRL_ULPI_INT_EN   BIT(8)
  61 #define MX53_USB_PHYCTRL1_PLLDIV_MASK   0x3
  62 #define MX53_USB_PLL_DIV_24_MHZ         0x01
  63
  64 #define MX6_BM_NON_BURST_SETTING        BIT(1)
  65 #define MX6_BM_OVER_CUR_DIS             BIT(7)
  66 #define MX6_BM_OVER_CUR_POLARITY        BIT(8)
  67 #define MX6_BM_PWR_POLARITY             BIT(9)
  68 #define MX6_BM_WAKEUP_ENABLE            BIT(10)
  69 #define MX6_BM_UTMI_ON_CLOCK            BIT(13)
  70 #define MX6_BM_ID_WAKEUP                BIT(16)
  71 #define MX6_BM_VBUS_WAKEUP              BIT(17)
  72 #define MX6SX_BM_DPDM_WAKEUP_EN         BIT(29)
  73 #define MX6_BM_WAKEUP_INTR              BIT(31)
  74
  75 #define MX6_USB_HSIC_CTRL_OFFSET        0x10
  76 /* Send resume signal without 480Mhz PHY clock */
  77 #define MX6SX_BM_HSIC_AUTO_RESUME       BIT(23)
  78 /* set before portsc.suspendM = 1 */
  79 #define MX6_BM_HSIC_DEV_CONN            BIT(21)
  80 /* HSIC enable */
  81 #define MX6_BM_HSIC_EN                  BIT(12)
  82 /* Force HSIC module 480M clock on, even when in Host is in suspend mode */
  83 #define MX6_BM_HSIC_CLK_ON              BIT(11)
  84
  85 #define MX6_USB_OTG1_PHY_CTRL           0x18
  86 /* For imx6dql, it is host-only controller, for later imx6, it is otg's */
  87 #define MX6_USB_OTG2_PHY_CTRL           0x1c
  88 #define MX6SX_USB_VBUS_WAKEUP_SOURCE(v) (v << 8)
  89 #define MX6SX_USB_VBUS_WAKEUP_SOURCE_VBUS       MX6SX_USB_VBUS_WAKEUP_SOURCE(0)
  90 #define MX6SX_USB_VBUS_WAKEUP_SOURCE_AVALID     MX6SX_USB_VBUS_WAKEUP_SOURCE(1)
  91 #define MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID     MX6SX_USB_VBUS_WAKEUP_SOURCE(2)
  92 #define MX6SX_USB_VBUS_WAKEUP_SOURCE_SESS_END   MX6SX_USB_VBUS_WAKEUP_SOURCE(3)
  93
  94 #define VF610_OVER_CUR_DIS              BIT(7)
  95
  96 #define MX7D_USBNC_USB_CTRL2            0x4
  97 #define MX7D_USB_VBUS_WAKEUP_SOURCE_MASK        0x3
  98 #define MX7D_USB_VBUS_WAKEUP_SOURCE(v)          (v << 0)
  99 #define MX7D_USB_VBUS_WAKEUP_SOURCE_VBUS        MX7D_USB_VBUS_WAKEUP_SOURCE(0)
 100 #define MX7D_USB_VBUS_WAKEUP_SOURCE_AVALID      MX7D_USB_VBUS_WAKEUP_SOURCE(1)
 101 #define MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID      MX7D_USB_VBUS_WAKEUP_SOURCE(2)
 102 #define MX7D_USB_VBUS_WAKEUP_SOURCE_SESS_END    MX7D_USB_VBUS_WAKEUP_SOURCE(3)
 103 #define MX7D_USBNC_AUTO_RESUME                          BIT(2)
 104 /* The default DM/DP value is pull-down */
 105 #define MX7D_USBNC_USB_CTRL2_OPMODE(v)                  (v << 6)
 106 #define MX7D_USBNC_USB_CTRL2_OPMODE_NON_DRIVING MX7D_USBNC_USB_CTRL2_OPMODE(1)
 107 #define MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_MASK       (BIT(7) | BIT(6))
 108 #define MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_EN         BIT(8)
 109 #define MX7D_USBNC_USB_CTRL2_DP_OVERRIDE_VAL            BIT(12)
 110 #define MX7D_USBNC_USB_CTRL2_DP_OVERRIDE_EN             BIT(13)
 111 #define MX7D_USBNC_USB_CTRL2_DM_OVERRIDE_VAL            BIT(14)
 112 #define MX7D_USBNC_USB_CTRL2_DM_OVERRIDE_EN             BIT(15)
 113 #define MX7D_USBNC_USB_CTRL2_DP_DM_MASK                 (BIT(12) | BIT(13) | \
 114                                                         BIT(14) | BIT(15))
 115
 116 #define MX7D_USB_OTG_PHY_CFG1           0x30
 117 #define MX7D_USB_OTG_PHY_CFG2_CHRG_CHRGSEL      BIT(0)
 118 #define MX7D_USB_OTG_PHY_CFG2_CHRG_VDATDETENB0  BIT(1)
 119 #define MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0  BIT(2)
 120 #define MX7D_USB_OTG_PHY_CFG2_CHRG_DCDENB       BIT(3)
 121 #define MX7D_USB_OTG_PHY_CFG2_DRVVBUS0          BIT(16)
 122
 123 #define MX7D_USB_OTG_PHY_CFG2           0x34
 124
 125 #define MX7D_USB_OTG_PHY_STATUS         0x3c
 126 #define MX7D_USB_OTG_PHY_STATUS_LINE_STATE0     BIT(0)
 127 #define MX7D_USB_OTG_PHY_STATUS_LINE_STATE1     BIT(1)
 128 #define MX7D_USB_OTG_PHY_STATUS_VBUS_VLD        BIT(3)
 129 #define MX7D_USB_OTG_PHY_STATUS_CHRGDET         BIT(29)
 130
 131 #define MX6_USB_OTG_WAKEUP_BITS (MX6_BM_WAKEUP_ENABLE | MX6_BM_VBUS_WAKEUP | \
 132                                  MX6_BM_ID_WAKEUP)
 133
 134 struct usbmisc_ops {
 135         /* It's called once when probe a usb device */
 136         int (*init)(struct imx_usbmisc_data *data);
 137         /* It's called once after adding a usb device */
 138         int (*post)(struct imx_usbmisc_data *data);
 139         /* It's called when we need to enable/disable usb wakeup */
 140         int (*set_wakeup)(struct imx_usbmisc_data *data, bool enabled);
 141         /* It's called before setting portsc.suspendM */
 142         int (*hsic_set_connect)(struct imx_usbmisc_data *data);
 143         /* It's called during suspend/resume */
 144         int (*hsic_set_clk)(struct imx_usbmisc_data *data, bool enabled);
 145         /* usb charger detection */
 146         int (*charger_detection)(struct imx_usbmisc_data *data);
 147 };
 148
 149 struct imx_usbmisc {
 150         void __iomem *base;
 151         spinlock_t lock;
 152         const struct usbmisc_ops *ops;
 153 };
 154
 155 static inline bool is_imx53_usbmisc(struct imx_usbmisc_data *data);
 156
 157 static int usbmisc_imx25_init(struct imx_usbmisc_data *data)
 158 {
 159         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 160         unsigned long flags;
 161         u32 val = 0;
 162
 163         if (data->index > 1)
 164                 return -EINVAL;
 165
 166         spin_lock_irqsave(&usbmisc->lock, flags);
 167         switch (data->index) {
 168         case 0:
 169                 val = readl(usbmisc->base);
 170                 val &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PP_BIT);
 171                 val |= (MX25_EHCI_INTERFACE_DIFF_UNI & MX25_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT;
 172                 val |= (MX25_OTG_PM_BIT | MX25_OTG_OCPOL_BIT);
 173
 174                 /*
 175                  * If the polarity is not configured assume active high for
 176                  * historical reasons.
 177                  */
 178                 if (data->oc_pol_configured && data->oc_pol_active_low)
 179                         val &= ~MX25_OTG_OCPOL_BIT;
 180
 181                 writel(val, usbmisc->base);
 182                 break;
 183         case 1:
 184                 val = readl(usbmisc->base);
 185                 val &= ~(MX25_H1_SIC_MASK | MX25_H1_PP_BIT |  MX25_H1_IPPUE_UP_BIT);
 186                 val |= (MX25_EHCI_INTERFACE_SINGLE_UNI & MX25_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT;
 187                 val |= (MX25_H1_PM_BIT | MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT |
 188                         MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT);
 189
 190                 /*
 191                  * If the polarity is not configured assume active high for
 192                  * historical reasons.
 193                  */
 194                 if (data->oc_pol_configured && data->oc_pol_active_low)
 195                         val &= ~MX25_H1_OCPOL_BIT;
 196
 197                 writel(val, usbmisc->base);
 198
 199                 break;
 200         }
 201         spin_unlock_irqrestore(&usbmisc->lock, flags);
 202
 203         return 0;
 204 }
 205
 206 static int usbmisc_imx25_post(struct imx_usbmisc_data *data)
 207 {
 208         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 209         void __iomem *reg;
 210         unsigned long flags;
 211         u32 val;
 212
 213         if (data->index > 2)
 214                 return -EINVAL;
 215
 216         if (data->index)
 217                 return 0;
 218
 219         spin_lock_irqsave(&usbmisc->lock, flags);
 220         reg = usbmisc->base + MX25_USB_PHY_CTRL_OFFSET;
 221         val = readl(reg);
 222
 223         if (data->evdo)
 224                 val |= MX25_BM_EXTERNAL_VBUS_DIVIDER;
 225         else
 226                 val &= ~MX25_BM_EXTERNAL_VBUS_DIVIDER;
 227
 228         writel(val, reg);
 229         spin_unlock_irqrestore(&usbmisc->lock, flags);
 230         usleep_range(5000, 10000); /* needed to stabilize voltage */
 231
 232         return 0;
 233 }
 234
 235 static int usbmisc_imx27_init(struct imx_usbmisc_data *data)
 236 {
 237         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 238         unsigned long flags;
 239         u32 val;
 240
 241         switch (data->index) {
 242         case 0:
 243                 val = MX27_OTG_PM_BIT;
 244                 break;
 245         case 1:
 246                 val = MX27_H1_PM_BIT;
 247                 break;
 248         case 2:
 249                 val = MX27_H2_PM_BIT;
 250                 break;
 251         default:
 252                 return -EINVAL;
 253         }
 254
 255         spin_lock_irqsave(&usbmisc->lock, flags);
 256         if (data->disable_oc)
 257                 val = readl(usbmisc->base) | val;
 258         else
 259                 val = readl(usbmisc->base) & ~val;
 260         writel(val, usbmisc->base);
 261         spin_unlock_irqrestore(&usbmisc->lock, flags);
 262
 263         return 0;
 264 }
 265
 266 static int usbmisc_imx53_init(struct imx_usbmisc_data *data)
 267 {
 268         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 269         void __iomem *reg = NULL;
 270         unsigned long flags;
 271         u32 val = 0;
 272
 273         if (data->index > 3)
 274                 return -EINVAL;
 275
 276         /* Select a 24 MHz reference clock for the PHY  */
 277         val = readl(usbmisc->base + MX53_USB_OTG_PHY_CTRL_1_OFFSET);
 278         val &= ~MX53_USB_PHYCTRL1_PLLDIV_MASK;
 279         val |= MX53_USB_PLL_DIV_24_MHZ;
 280         writel(val, usbmisc->base + MX53_USB_OTG_PHY_CTRL_1_OFFSET);
 281
 282         spin_lock_irqsave(&usbmisc->lock, flags);
 283
 284         switch (data->index) {
 285         case 0:
 286                 if (data->disable_oc) {
 287                         reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_0_OFFSET;
 288                         val = readl(reg) | MX53_BM_OVER_CUR_DIS_OTG;
 289                         writel(val, reg);
 290                 }
 291                 break;
 292         case 1:
 293                 if (data->disable_oc) {
 294                         reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_0_OFFSET;
 295                         val = readl(reg) | MX53_BM_OVER_CUR_DIS_H1;
 296                         writel(val, reg);
 297                 }
 298                 break;
 299         case 2:
 300                 if (data->ulpi) {
 301                         /* set USBH2 into ULPI-mode. */
 302                         reg = usbmisc->base + MX53_USB_CTRL_1_OFFSET;
 303                         val = readl(reg) | MX53_USB_CTRL_1_UH2_ULPI_EN;
 304                         /* select ULPI clock */
 305                         val &= ~MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_MASK;
 306                         val |= MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_ULPI;
 307                         writel(val, reg);
 308                         /* Set interrupt wake up enable */
 309                         reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET;
 310                         val = readl(reg) | MX53_USB_UHx_CTRL_WAKE_UP_EN
 311                                 | MX53_USB_UHx_CTRL_ULPI_INT_EN;
 312                         writel(val, reg);
 313                         if (is_imx53_usbmisc(data)) {
 314                                 /* Disable internal 60Mhz clock */
 315                                 reg = usbmisc->base +
 316                                         MX53_USB_CLKONOFF_CTRL_OFFSET;
 317                                 val = readl(reg) |
 318                                         MX53_USB_CLKONOFF_CTRL_H2_INT60CKOFF;
 319                                 writel(val, reg);
 320                         }
 321
 322                 }
 323                 if (data->disable_oc) {
 324                         reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET;
 325                         val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx;
 326                         writel(val, reg);
 327                 }
 328                 break;
 329         case 3:
 330                 if (data->ulpi) {
 331                         /* set USBH3 into ULPI-mode. */
 332                         reg = usbmisc->base + MX53_USB_CTRL_1_OFFSET;
 333                         val = readl(reg) | MX53_USB_CTRL_1_UH3_ULPI_EN;
 334                         /* select ULPI clock */
 335                         val &= ~MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_MASK;
 336                         val |= MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_ULPI;
 337                         writel(val, reg);
 338                         /* Set interrupt wake up enable */
 339                         reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET;
 340                         val = readl(reg) | MX53_USB_UHx_CTRL_WAKE_UP_EN
 341                                 | MX53_USB_UHx_CTRL_ULPI_INT_EN;
 342                         writel(val, reg);
 343
 344                         if (is_imx53_usbmisc(data)) {
 345                                 /* Disable internal 60Mhz clock */
 346                                 reg = usbmisc->base +
 347                                         MX53_USB_CLKONOFF_CTRL_OFFSET;
 348                                 val = readl(reg) |
 349                                         MX53_USB_CLKONOFF_CTRL_H3_INT60CKOFF;
 350                                 writel(val, reg);
 351                         }
 352                 }
 353                 if (data->disable_oc) {
 354                         reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET;
 355                         val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx;
 356                         writel(val, reg);
 357                 }
 358                 break;
 359         }
 360
 361         spin_unlock_irqrestore(&usbmisc->lock, flags);
 362
 363         return 0;
 364 }
 365
 366 static u32 usbmisc_wakeup_setting(struct imx_usbmisc_data *data)
 367 {
 368         u32 wakeup_setting = MX6_USB_OTG_WAKEUP_BITS;
 369
 370         if (data->ext_id || data->available_role != USB_DR_MODE_OTG)
 371                 wakeup_setting &= ~MX6_BM_ID_WAKEUP;
 372
 373         if (data->ext_vbus || data->available_role == USB_DR_MODE_HOST)
 374                 wakeup_setting &= ~MX6_BM_VBUS_WAKEUP;
 375
 376         return wakeup_setting;
 377 }
 378
 379 static int usbmisc_imx6q_set_wakeup
 380         (struct imx_usbmisc_data *data, bool enabled)
 381 {
 382         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 383         unsigned long flags;
 384         u32 val;
 385         int ret = 0;
 386
 387         if (data->index > 3)
 388                 return -EINVAL;
 389
 390         spin_lock_irqsave(&usbmisc->lock, flags);
 391         val = readl(usbmisc->base + data->index * 4);
 392         if (enabled) {
 393                 val &= ~MX6_USB_OTG_WAKEUP_BITS;
 394                 val |= usbmisc_wakeup_setting(data);
 395         } else {
 396                 if (val & MX6_BM_WAKEUP_INTR)
 397                         pr_debug("wakeup int at ci_hdrc.%d\n", data->index);
 398                 val &= ~MX6_USB_OTG_WAKEUP_BITS;
 399         }
 400         writel(val, usbmisc->base + data->index * 4);
 401         spin_unlock_irqrestore(&usbmisc->lock, flags);
 402
 403         return ret;
 404 }
 405
 406 static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
 407 {
 408         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 409         unsigned long flags;
 410         u32 reg;
 411
 412         if (data->index > 3)
 413                 return -EINVAL;
 414
 415         spin_lock_irqsave(&usbmisc->lock, flags);
 416
 417         reg = readl(usbmisc->base + data->index * 4);
 418         if (data->disable_oc) {
 419                 reg |= MX6_BM_OVER_CUR_DIS;
 420         } else {
 421                 reg &= ~MX6_BM_OVER_CUR_DIS;
 422
 423                 /*
 424                  * If the polarity is not configured keep it as setup by the
 425                  * bootloader.
 426                  */
 427                 if (data->oc_pol_configured && data->oc_pol_active_low)
 428                         reg |= MX6_BM_OVER_CUR_POLARITY;
 429                 else if (data->oc_pol_configured)
 430                         reg &= ~MX6_BM_OVER_CUR_POLARITY;
 431         }
 432         /* If the polarity is not set keep it as setup by the bootlader */
 433         if (data->pwr_pol == 1)
 434                 reg |= MX6_BM_PWR_POLARITY;
 435         writel(reg, usbmisc->base + data->index * 4);
 436
 437         /* SoC non-burst setting */
 438         reg = readl(usbmisc->base + data->index * 4);
 439         writel(reg | MX6_BM_NON_BURST_SETTING,
 440                         usbmisc->base + data->index * 4);
 441
 442         /* For HSIC controller */
 443         if (data->hsic) {
 444                 reg = readl(usbmisc->base + data->index * 4);
 445                 writel(reg | MX6_BM_UTMI_ON_CLOCK,
 446                         usbmisc->base + data->index * 4);
 447                 reg = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET
 448                         + (data->index - 2) * 4);
 449                 reg |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON;
 450                 writel(reg, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET
 451                         + (data->index - 2) * 4);
 452         }
 453
 454         spin_unlock_irqrestore(&usbmisc->lock, flags);
 455
 456         usbmisc_imx6q_set_wakeup(data, false);
 457
 458         return 0;
 459 }
 460
 461 static int usbmisc_imx6_hsic_get_reg_offset(struct imx_usbmisc_data *data)
 462 {
 463         int offset, ret = 0;
 464
 465         if (data->index == 2 || data->index == 3) {
 466                 offset = (data->index - 2) * 4;
 467         } else if (data->index == 0) {
 468                 /*
 469                  * For SoCs like i.MX7D and later, each USB controller has
 470                  * its own non-core register region. For SoCs before i.MX7D,
 471                  * the first two USB controllers are non-HSIC controllers.
 472                  */
 473                 offset = 0;
 474         } else {
 475                 dev_err(data->dev, "index is error for usbmisc\n");
 476                 ret = -EINVAL;
 477         }
 478
 479         return ret ? ret : offset;
 480 }
 481
 482 static int usbmisc_imx6_hsic_set_connect(struct imx_usbmisc_data *data)
 483 {
 484         unsigned long flags;
 485         u32 val;
 486         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 487         int offset;
 488
 489         spin_lock_irqsave(&usbmisc->lock, flags);
 490         offset = usbmisc_imx6_hsic_get_reg_offset(data);
 491         if (offset < 0) {
 492                 spin_unlock_irqrestore(&usbmisc->lock, flags);
 493                 return offset;
 494         }
 495
 496         val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset);
 497         if (!(val & MX6_BM_HSIC_DEV_CONN))
 498                 writel(val | MX6_BM_HSIC_DEV_CONN,
 499                         usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset);
 500
 501         spin_unlock_irqrestore(&usbmisc->lock, flags);
 502
 503         return 0;
 504 }
 505
 506 static int usbmisc_imx6_hsic_set_clk(struct imx_usbmisc_data *data, bool on)
 507 {
 508         unsigned long flags;
 509         u32 val;
 510         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 511         int offset;
 512
 513         spin_lock_irqsave(&usbmisc->lock, flags);
 514         offset = usbmisc_imx6_hsic_get_reg_offset(data);
 515         if (offset < 0) {
 516                 spin_unlock_irqrestore(&usbmisc->lock, flags);
 517                 return offset;
 518         }
 519
 520         val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset);
 521         val |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON;
 522         if (on)
 523                 val |= MX6_BM_HSIC_CLK_ON;
 524         else
 525                 val &= ~MX6_BM_HSIC_CLK_ON;
 526
 527         writel(val, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset);
 528         spin_unlock_irqrestore(&usbmisc->lock, flags);
 529
 530         return 0;
 531 }
 532
 533
 534 static int usbmisc_imx6sx_init(struct imx_usbmisc_data *data)
 535 {
 536         void __iomem *reg = NULL;
 537         unsigned long flags;
 538         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 539         u32 val;
 540
 541         usbmisc_imx6q_init(data);
 542
 543         if (data->index == 0 || data->index == 1) {
 544                 reg = usbmisc->base + MX6_USB_OTG1_PHY_CTRL + data->index * 4;
 545                 spin_lock_irqsave(&usbmisc->lock, flags);
 546                 /* Set vbus wakeup source as bvalid */
 547                 val = readl(reg);
 548                 writel(val | MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID, reg);
 549                 /*
 550                  * Disable dp/dm wakeup in device mode when vbus is
 551                  * not there.
 552                  */
 553                 val = readl(usbmisc->base + data->index * 4);
 554                 writel(val & ~MX6SX_BM_DPDM_WAKEUP_EN,
 555                         usbmisc->base + data->index * 4);
 556                 spin_unlock_irqrestore(&usbmisc->lock, flags);
 557         }
 558
 559         /* For HSIC controller */
 560         if (data->hsic) {
 561                 val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET);
 562                 val |= MX6SX_BM_HSIC_AUTO_RESUME;
 563                 writel(val, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET);
 564         }
 565
 566         return 0;
 567 }
 568
 569 static int usbmisc_vf610_init(struct imx_usbmisc_data *data)
 570 {
 571         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 572         u32 reg;
 573
 574         /*
 575          * Vybrid only has one misc register set, but in two different
 576          * areas. These is reflected in two instances of this driver.
 577          */
 578         if (data->index >= 1)
 579                 return -EINVAL;
 580
 581         if (data->disable_oc) {
 582                 reg = readl(usbmisc->base);
 583                 writel(reg | VF610_OVER_CUR_DIS, usbmisc->base);
 584         }
 585
 586         return 0;
 587 }
 588
 589 static int usbmisc_imx7d_set_wakeup
 590         (struct imx_usbmisc_data *data, bool enabled)
 591 {
 592         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 593         unsigned long flags;
 594         u32 val;
 595
 596         spin_lock_irqsave(&usbmisc->lock, flags);
 597         val = readl(usbmisc->base);
 598         if (enabled) {
 599                 val &= ~MX6_USB_OTG_WAKEUP_BITS;
 600                 val |= usbmisc_wakeup_setting(data);
 601                 writel(val, usbmisc->base);
 602         } else {
 603                 if (val & MX6_BM_WAKEUP_INTR)
 604                         dev_dbg(data->dev, "wakeup int\n");
 605                 writel(val & ~MX6_USB_OTG_WAKEUP_BITS, usbmisc->base);
 606         }
 607         spin_unlock_irqrestore(&usbmisc->lock, flags);
 608
 609         return 0;
 610 }
 611
 612 static int usbmisc_imx7d_init(struct imx_usbmisc_data *data)
 613 {
 614         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 615         unsigned long flags;
 616         u32 reg;
 617
 618         if (data->index >= 1)
 619                 return -EINVAL;
 620
 621         spin_lock_irqsave(&usbmisc->lock, flags);
 622         reg = readl(usbmisc->base);
 623         if (data->disable_oc) {
 624                 reg |= MX6_BM_OVER_CUR_DIS;
 625         } else {
 626                 reg &= ~MX6_BM_OVER_CUR_DIS;
 627
 628                 /*
 629                  * If the polarity is not configured keep it as setup by the
 630                  * bootloader.
 631                  */
 632                 if (data->oc_pol_configured && data->oc_pol_active_low)
 633                         reg |= MX6_BM_OVER_CUR_POLARITY;
 634                 else if (data->oc_pol_configured)
 635                         reg &= ~MX6_BM_OVER_CUR_POLARITY;
 636         }
 637         /* If the polarity is not set keep it as setup by the bootlader */
 638         if (data->pwr_pol == 1)
 639                 reg |= MX6_BM_PWR_POLARITY;
 640         writel(reg, usbmisc->base);
 641
 642         /* SoC non-burst setting */
 643         reg = readl(usbmisc->base);
 644         writel(reg | MX6_BM_NON_BURST_SETTING, usbmisc->base);
 645
 646         if (!data->hsic) {
 647                 reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
 648                 reg &= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK;
 649                 writel(reg | MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID
 650                         | MX7D_USBNC_AUTO_RESUME,
 651                         usbmisc->base + MX7D_USBNC_USB_CTRL2);
 652         }
 653
 654         spin_unlock_irqrestore(&usbmisc->lock, flags);
 655
 656         usbmisc_imx7d_set_wakeup(data, false);
 657
 658         return 0;
 659 }
 660
 661 static int imx7d_charger_secondary_detection(struct imx_usbmisc_data *data)
 662 {
 663         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 664         struct usb_phy *usb_phy = data->usb_phy;
 665         int val;
 666         unsigned long flags;
 667
 668         /* VDM_SRC is connected to D- and IDP_SINK is connected to D+ */
 669         spin_lock_irqsave(&usbmisc->lock, flags);
 670         val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
 671         writel(val | MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0 |
 672                         MX7D_USB_OTG_PHY_CFG2_CHRG_VDATDETENB0 |
 673                         MX7D_USB_OTG_PHY_CFG2_CHRG_CHRGSEL,
 674                                 usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
 675         spin_unlock_irqrestore(&usbmisc->lock, flags);
 676
 677         usleep_range(1000, 2000);
 678
 679         /*
 680          * Per BC 1.2, check voltage of D+:
 681          * DCP: if greater than VDAT_REF;
 682          * CDP: if less than VDAT_REF.
 683          */
 684         val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS);
 685         if (val & MX7D_USB_OTG_PHY_STATUS_CHRGDET) {
 686                 dev_dbg(data->dev, "It is a dedicate charging port\n");
 687                 usb_phy->chg_type = DCP_TYPE;
 688         } else {
 689                 dev_dbg(data->dev, "It is a charging downstream port\n");
 690                 usb_phy->chg_type = CDP_TYPE;
 691         }
 692
 693         return 0;
 694 }
 695
 696 static void imx7_disable_charger_detector(struct imx_usbmisc_data *data)
 697 {
 698         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 699         unsigned long flags;
 700         u32 val;
 701
 702         spin_lock_irqsave(&usbmisc->lock, flags);
 703         val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
 704         val &= ~(MX7D_USB_OTG_PHY_CFG2_CHRG_DCDENB |
 705                         MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0 |
 706                         MX7D_USB_OTG_PHY_CFG2_CHRG_VDATDETENB0 |
 707                         MX7D_USB_OTG_PHY_CFG2_CHRG_CHRGSEL);
 708         writel(val, usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
 709
 710         /* Set OPMODE to be 2'b00 and disable its override */
 711         val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
 712         val &= ~MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_MASK;
 713         writel(val, usbmisc->base + MX7D_USBNC_USB_CTRL2);
 714
 715         val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
 716         writel(val & ~MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_EN,
 717                         usbmisc->base + MX7D_USBNC_USB_CTRL2);
 718         spin_unlock_irqrestore(&usbmisc->lock, flags);
 719 }
 720
 721 static int imx7d_charger_data_contact_detect(struct imx_usbmisc_data *data)
 722 {
 723         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 724         unsigned long flags;
 725         u32 val;
 726         int i, data_pin_contact_count = 0;
 727
 728         /* Enable Data Contact Detect (DCD) per the USB BC 1.2 */
 729         spin_lock_irqsave(&usbmisc->lock, flags);
 730         val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
 731         writel(val | MX7D_USB_OTG_PHY_CFG2_CHRG_DCDENB,
 732                         usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
 733         spin_unlock_irqrestore(&usbmisc->lock, flags);
 734
 735         for (i = 0; i < 100; i = i + 1) {
 736                 val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS);
 737                 if (!(val & MX7D_USB_OTG_PHY_STATUS_LINE_STATE0)) {
 738                         if (data_pin_contact_count++ > 5)
 739                                 /* Data pin makes contact */
 740                                 break;
 741                         usleep_range(5000, 10000);
 742                 } else {
 743                         data_pin_contact_count = 0;
 744                         usleep_range(5000, 6000);
 745                 }
 746         }
 747
 748         /* Disable DCD after finished data contact check */
 749         spin_lock_irqsave(&usbmisc->lock, flags);
 750         val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
 751         writel(val & ~MX7D_USB_OTG_PHY_CFG2_CHRG_DCDENB,
 752                         usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
 753         spin_unlock_irqrestore(&usbmisc->lock, flags);
 754
 755         if (i == 100) {
 756                 dev_err(data->dev,
 757                         "VBUS is coming from a dedicated power supply.\n");
 758                 return -ENXIO;
 759         }
 760
 761         return 0;
 762 }
 763
 764 static int imx7d_charger_primary_detection(struct imx_usbmisc_data *data)
 765 {
 766         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 767         struct usb_phy *usb_phy = data->usb_phy;
 768         unsigned long flags;
 769         u32 val;
 770
 771         /* VDP_SRC is connected to D+ and IDM_SINK is connected to D- */
 772         spin_lock_irqsave(&usbmisc->lock, flags);
 773         val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
 774         val &= ~MX7D_USB_OTG_PHY_CFG2_CHRG_CHRGSEL;
 775         writel(val | MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0 |
 776                         MX7D_USB_OTG_PHY_CFG2_CHRG_VDATDETENB0,
 777                                 usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
 778         spin_unlock_irqrestore(&usbmisc->lock, flags);
 779
 780         usleep_range(1000, 2000);
 781
 782         /* Check if D- is less than VDAT_REF to determine an SDP per BC 1.2 */
 783         val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS);
 784         if (!(val & MX7D_USB_OTG_PHY_STATUS_CHRGDET)) {
 785                 dev_dbg(data->dev, "It is a standard downstream port\n");
 786                 usb_phy->chg_type = SDP_TYPE;
 787         }
 788
 789         return 0;
 790 }
 791
 792 /*
 793  * Whole charger detection process:
 794  * 1. OPMODE override to be non-driving
 795  * 2. Data contact check
 796  * 3. Primary detection
 797  * 4. Secondary detection
 798  * 5. Disable charger detection
 799  */
 800 static int imx7d_charger_detection(struct imx_usbmisc_data *data)
 801 {
 802         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 803         struct usb_phy *usb_phy = data->usb_phy;
 804         unsigned long flags;
 805         u32 val;
 806         int ret;
 807
 808         /* Check if vbus is valid */
 809         val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS);
 810         if (!(val & MX7D_USB_OTG_PHY_STATUS_VBUS_VLD)) {
 811                 dev_err(data->dev, "vbus is error\n");
 812                 return -EINVAL;
 813         }
 814
 815         /*
 816          * Keep OPMODE to be non-driving mode during the whole
 817          * charger detection process.
 818          */
 819         spin_lock_irqsave(&usbmisc->lock, flags);
 820         val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
 821         val &= ~MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_MASK;
 822         val |= MX7D_USBNC_USB_CTRL2_OPMODE_NON_DRIVING;
 823         writel(val, usbmisc->base + MX7D_USBNC_USB_CTRL2);
 824
 825         val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
 826         writel(val | MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_EN,
 827                         usbmisc->base + MX7D_USBNC_USB_CTRL2);
 828         spin_unlock_irqrestore(&usbmisc->lock, flags);
 829
 830         ret = imx7d_charger_data_contact_detect(data);
 831         if (ret)
 832                 return ret;
 833
 834         ret = imx7d_charger_primary_detection(data);
 835         if (!ret && usb_phy->chg_type != SDP_TYPE)
 836                 ret = imx7d_charger_secondary_detection(data);
 837
 838         imx7_disable_charger_detector(data);
 839
 840         return ret;
 841 }
 842
 843 static int usbmisc_imx7ulp_init(struct imx_usbmisc_data *data)
 844 {
 845         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 846         unsigned long flags;
 847         u32 reg;
 848
 849         if (data->index >= 1)
 850                 return -EINVAL;
 851
 852         spin_lock_irqsave(&usbmisc->lock, flags);
 853         reg = readl(usbmisc->base);
 854         if (data->disable_oc) {
 855                 reg |= MX6_BM_OVER_CUR_DIS;
 856         } else {
 857                 reg &= ~MX6_BM_OVER_CUR_DIS;
 858
 859                 /*
 860                  * If the polarity is not configured keep it as setup by the
 861                  * bootloader.
 862                  */
 863                 if (data->oc_pol_configured && data->oc_pol_active_low)
 864                         reg |= MX6_BM_OVER_CUR_POLARITY;
 865                 else if (data->oc_pol_configured)
 866                         reg &= ~MX6_BM_OVER_CUR_POLARITY;
 867         }
 868         /* If the polarity is not set keep it as setup by the bootlader */
 869         if (data->pwr_pol == 1)
 870                 reg |= MX6_BM_PWR_POLARITY;
 871
 872         writel(reg, usbmisc->base);
 873
 874         /* SoC non-burst setting */
 875         reg = readl(usbmisc->base);
 876         writel(reg | MX6_BM_NON_BURST_SETTING, usbmisc->base);
 877
 878         if (data->hsic) {
 879                 reg = readl(usbmisc->base);
 880                 writel(reg | MX6_BM_UTMI_ON_CLOCK, usbmisc->base);
 881
 882                 reg = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET);
 883                 reg |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON;
 884                 writel(reg, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET);
 885
 886                 /*
 887                  * For non-HSIC controller, the autoresume is enabled
 888                  * at MXS PHY driver (usbphy_ctrl bit18).
 889                  */
 890                 reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
 891                 writel(reg | MX7D_USBNC_AUTO_RESUME,
 892                         usbmisc->base + MX7D_USBNC_USB_CTRL2);
 893         } else {
 894                 reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
 895                 reg &= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK;
 896                 writel(reg | MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID,
 897                          usbmisc->base + MX7D_USBNC_USB_CTRL2);
 898         }
 899
 900         spin_unlock_irqrestore(&usbmisc->lock, flags);
 901
 902         usbmisc_imx7d_set_wakeup(data, false);
 903
 904         return 0;
 905 }
 906
 907 static const struct usbmisc_ops imx25_usbmisc_ops = {
 908         .init = usbmisc_imx25_init,
 909         .post = usbmisc_imx25_post,
 910 };
 911
 912 static const struct usbmisc_ops imx27_usbmisc_ops = {
 913         .init = usbmisc_imx27_init,
 914 };
 915
 916 static const struct usbmisc_ops imx51_usbmisc_ops = {
 917         .init = usbmisc_imx53_init,
 918 };
 919
 920 static const struct usbmisc_ops imx53_usbmisc_ops = {
 921         .init = usbmisc_imx53_init,
 922 };
 923
 924 static const struct usbmisc_ops imx6q_usbmisc_ops = {
 925         .set_wakeup = usbmisc_imx6q_set_wakeup,
 926         .init = usbmisc_imx6q_init,
 927         .hsic_set_connect = usbmisc_imx6_hsic_set_connect,
 928         .hsic_set_clk   = usbmisc_imx6_hsic_set_clk,
 929 };
 930
 931 static const struct usbmisc_ops vf610_usbmisc_ops = {
 932         .init = usbmisc_vf610_init,
 933 };
 934
 935 static const struct usbmisc_ops imx6sx_usbmisc_ops = {
 936         .set_wakeup = usbmisc_imx6q_set_wakeup,
 937         .init = usbmisc_imx6sx_init,
 938         .hsic_set_connect = usbmisc_imx6_hsic_set_connect,
 939         .hsic_set_clk = usbmisc_imx6_hsic_set_clk,
 940 };
 941
 942 static const struct usbmisc_ops imx7d_usbmisc_ops = {
 943         .init = usbmisc_imx7d_init,
 944         .set_wakeup = usbmisc_imx7d_set_wakeup,
 945         .charger_detection = imx7d_charger_detection,
 946 };
 947
 948 static const struct usbmisc_ops imx7ulp_usbmisc_ops = {
 949         .init = usbmisc_imx7ulp_init,
 950         .set_wakeup = usbmisc_imx7d_set_wakeup,
 951         .hsic_set_connect = usbmisc_imx6_hsic_set_connect,
 952         .hsic_set_clk = usbmisc_imx6_hsic_set_clk,
 953 };
 954
 955 static inline bool is_imx53_usbmisc(struct imx_usbmisc_data *data)
 956 {
 957         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 958
 959         return usbmisc->ops == &imx53_usbmisc_ops;
 960 }
 961
 962 int imx_usbmisc_init(struct imx_usbmisc_data *data)
 963 {
 964         struct imx_usbmisc *usbmisc;
 965
 966         if (!data)
 967                 return 0;
 968
 969         usbmisc = dev_get_drvdata(data->dev);
 970         if (!usbmisc->ops->init)
 971                 return 0;
 972         return usbmisc->ops->init(data);
 973 }
 974 EXPORT_SYMBOL_GPL(imx_usbmisc_init);
 975
 976 int imx_usbmisc_init_post(struct imx_usbmisc_data *data)
 977 {
 978         struct imx_usbmisc *usbmisc;
 979
 980         if (!data)
 981                 return 0;
 982
 983         usbmisc = dev_get_drvdata(data->dev);
 984         if (!usbmisc->ops->post)
 985                 return 0;
 986         return usbmisc->ops->post(data);
 987 }
 988 EXPORT_SYMBOL_GPL(imx_usbmisc_init_post);
 989
 990 int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *data, bool enabled)
 991 {
 992         struct imx_usbmisc *usbmisc;
 993
 994         if (!data)
 995                 return 0;
 996
 997         usbmisc = dev_get_drvdata(data->dev);
 998         if (!usbmisc->ops->set_wakeup)
 999                 return 0;
1000         return usbmisc->ops->set_wakeup(data, enabled);
1001 }
1002 EXPORT_SYMBOL_GPL(imx_usbmisc_set_wakeup);
1003
1004 int imx_usbmisc_hsic_set_connect(struct imx_usbmisc_data *data)
1005 {
1006         struct imx_usbmisc *usbmisc;
1007
1008         if (!data)
1009                 return 0;
1010
1011         usbmisc = dev_get_drvdata(data->dev);
1012         if (!usbmisc->ops->hsic_set_connect || !data->hsic)
1013                 return 0;
1014         return usbmisc->ops->hsic_set_connect(data);
1015 }
1016 EXPORT_SYMBOL_GPL(imx_usbmisc_hsic_set_connect);
1017
1018 int imx_usbmisc_hsic_set_clk(struct imx_usbmisc_data *data, bool on)
1019 {
1020         struct imx_usbmisc *usbmisc;
1021
1022         if (!data)
1023                 return 0;
1024
1025         usbmisc = dev_get_drvdata(data->dev);
1026         if (!usbmisc->ops->hsic_set_clk || !data->hsic)
1027                 return 0;
1028         return usbmisc->ops->hsic_set_clk(data, on);
1029 }
1030 EXPORT_SYMBOL_GPL(imx_usbmisc_hsic_set_clk);
1031
1032 int imx_usbmisc_charger_detection(struct imx_usbmisc_data *data, bool connect)
1033 {
1034         struct imx_usbmisc *usbmisc;
1035         struct usb_phy *usb_phy;
1036         int ret = 0;
1037
1038         if (!data)
1039                 return -EINVAL;
1040
1041         usbmisc = dev_get_drvdata(data->dev);
1042         usb_phy = data->usb_phy;
1043         if (!usbmisc->ops->charger_detection)
1044                 return -ENOTSUPP;
1045
1046         if (connect) {
1047                 ret = usbmisc->ops->charger_detection(data);
1048                 if (ret) {
1049                         dev_err(data->dev,
1050                                         "Error occurs during detection: %d\n",
1051                                         ret);
1052                         usb_phy->chg_state = USB_CHARGER_ABSENT;
1053                 } else {
1054                         usb_phy->chg_state = USB_CHARGER_PRESENT;
1055                 }
1056         } else {
1057                 usb_phy->chg_state = USB_CHARGER_ABSENT;
1058                 usb_phy->chg_type = UNKNOWN_TYPE;
1059         }
1060         return ret;
1061 }
1062 EXPORT_SYMBOL_GPL(imx_usbmisc_charger_detection);
1063
1064 static const struct of_device_id usbmisc_imx_dt_ids[] = {
1065         {
1066                 .compatible = "fsl,imx25-usbmisc",
1067                 .data = &imx25_usbmisc_ops,
1068         },
1069         {
1070                 .compatible = "fsl,imx35-usbmisc",
1071                 .data = &imx25_usbmisc_ops,
1072         },
1073         {
1074                 .compatible = "fsl,imx27-usbmisc",
1075                 .data = &imx27_usbmisc_ops,
1076         },
1077         {
1078                 .compatible = "fsl,imx51-usbmisc",
1079                 .data = &imx51_usbmisc_ops,
1080         },
1081         {
1082                 .compatible = "fsl,imx53-usbmisc",
1083                 .data = &imx53_usbmisc_ops,
1084         },
1085         {
1086                 .compatible = "fsl,imx6q-usbmisc",
1087                 .data = &imx6q_usbmisc_ops,
1088         },
1089         {
1090                 .compatible = "fsl,vf610-usbmisc",
1091                 .data = &vf610_usbmisc_ops,
1092         },
1093         {
1094                 .compatible = "fsl,imx6sx-usbmisc",
1095                 .data = &imx6sx_usbmisc_ops,
1096         },
1097         {
1098                 .compatible = "fsl,imx6ul-usbmisc",
1099                 .data = &imx6sx_usbmisc_ops,
1100         },
1101         {
1102                 .compatible = "fsl,imx7d-usbmisc",
1103                 .data = &imx7d_usbmisc_ops,
1104         },
1105         {
1106                 .compatible = "fsl,imx7ulp-usbmisc",
1107                 .data = &imx7ulp_usbmisc_ops,
1108         },
1109         { /* sentinel */ }
1110 };
1111 MODULE_DEVICE_TABLE(of, usbmisc_imx_dt_ids);
1112
1113 static int usbmisc_imx_probe(struct platform_device *pdev)
1114 {
1115         struct imx_usbmisc *data;
1116         const struct of_device_id *of_id;
1117
1118         of_id = of_match_device(usbmisc_imx_dt_ids, &pdev->dev);
1119         if (!of_id)
1120                 return -ENODEV;
1121
1122         data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
1123         if (!data)
1124                 return -ENOMEM;
1125
1126         spin_lock_init(&data->lock);
1127
1128         data->base = devm_platform_ioremap_resource(pdev, 0);
1129         if (IS_ERR(data->base))
1130                 return PTR_ERR(data->base);
1131
1132         data->ops = (const struct usbmisc_ops *)of_id->data;
1133         platform_set_drvdata(pdev, data);
1134
1135         return 0;
1136 }
1137
1138 static int usbmisc_imx_remove(struct platform_device *pdev)
1139 {
1140         return 0;
1141 }
1142
1143 static struct platform_driver usbmisc_imx_driver = {
1144         .probe = usbmisc_imx_probe,
1145         .remove = usbmisc_imx_remove,
1146         .driver = {
1147                 .name = "usbmisc_imx",
1148                 .of_match_table = usbmisc_imx_dt_ids,
1149          },
1150 };
1151
1152 module_platform_driver(usbmisc_imx_driver);
1153
1154 MODULE_ALIAS("platform:usbmisc-imx");
1155 MODULE_LICENSE("GPL");
1156 MODULE_DESCRIPTION("driver for imx usb non-core registers");
1157 MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>");