2 * udc.c - ChipIdea UDC driver
4 * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
13 #include <linux/delay.h>
14 #include <linux/device.h>
15 #include <linux/dmapool.h>
16 #include <linux/err.h>
17 #include <linux/irqreturn.h>
18 #include <linux/kernel.h>
19 #include <linux/slab.h>
20 #include <linux/pm_runtime.h>
21 #include <linux/usb/ch9.h>
22 #include <linux/usb/gadget.h>
23 #include <linux/usb/otg-fsm.h>
24 #include <linux/usb/chipidea.h>
32 /* control endpoint description */
33 static const struct usb_endpoint_descriptor
34 ctrl_endpt_out_desc = {
35 .bLength = USB_DT_ENDPOINT_SIZE,
36 .bDescriptorType = USB_DT_ENDPOINT,
38 .bEndpointAddress = USB_DIR_OUT,
39 .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
40 .wMaxPacketSize = cpu_to_le16(CTRL_PAYLOAD_MAX),
43 static const struct usb_endpoint_descriptor
44 ctrl_endpt_in_desc = {
45 .bLength = USB_DT_ENDPOINT_SIZE,
46 .bDescriptorType = USB_DT_ENDPOINT,
48 .bEndpointAddress = USB_DIR_IN,
49 .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
50 .wMaxPacketSize = cpu_to_le16(CTRL_PAYLOAD_MAX),
54 * hw_ep_bit: calculates the bit number
55 * @num: endpoint number
56 * @dir: endpoint direction
58 * This function returns bit number
60 static inline int hw_ep_bit(int num, int dir)
62 return num + (dir ? 16 : 0);
65 static inline int ep_to_bit(struct ci_hdrc *ci, int n)
67 int fill = 16 - ci->hw_ep_max / 2;
69 if (n >= ci->hw_ep_max / 2)
76 * hw_device_state: enables/disables interrupts (execute without interruption)
77 * @dma: 0 => disable, !0 => enable and set dma engine
79 * This function returns an error code
81 static int hw_device_state(struct ci_hdrc *ci, u32 dma)
84 hw_write(ci, OP_ENDPTLISTADDR, ~0, dma);
85 /* interrupt, error, port change, reset, sleep/suspend */
86 hw_write(ci, OP_USBINTR, ~0,
87 USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI);
89 hw_write(ci, OP_USBINTR, ~0, 0);
95 * hw_ep_flush: flush endpoint fifo (execute without interruption)
96 * @num: endpoint number
97 * @dir: endpoint direction
99 * This function returns an error code
101 static int hw_ep_flush(struct ci_hdrc *ci, int num, int dir)
103 int n = hw_ep_bit(num, dir);
106 /* flush any pending transfer */
107 hw_write(ci, OP_ENDPTFLUSH, ~0, BIT(n));
108 while (hw_read(ci, OP_ENDPTFLUSH, BIT(n)))
110 } while (hw_read(ci, OP_ENDPTSTAT, BIT(n)));
116 * hw_ep_disable: disables endpoint (execute without interruption)
117 * @num: endpoint number
118 * @dir: endpoint direction
120 * This function returns an error code
122 static int hw_ep_disable(struct ci_hdrc *ci, int num, int dir)
124 hw_ep_flush(ci, num, dir);
125 hw_write(ci, OP_ENDPTCTRL + num,
126 dir ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0);
131 * hw_ep_enable: enables endpoint (execute without interruption)
132 * @num: endpoint number
133 * @dir: endpoint direction
134 * @type: endpoint type
136 * This function returns an error code
138 static int hw_ep_enable(struct ci_hdrc *ci, int num, int dir, int type)
143 mask = ENDPTCTRL_TXT; /* type */
144 data = type << __ffs(mask);
146 mask |= ENDPTCTRL_TXS; /* unstall */
147 mask |= ENDPTCTRL_TXR; /* reset data toggle */
148 data |= ENDPTCTRL_TXR;
149 mask |= ENDPTCTRL_TXE; /* enable */
150 data |= ENDPTCTRL_TXE;
152 mask = ENDPTCTRL_RXT; /* type */
153 data = type << __ffs(mask);
155 mask |= ENDPTCTRL_RXS; /* unstall */
156 mask |= ENDPTCTRL_RXR; /* reset data toggle */
157 data |= ENDPTCTRL_RXR;
158 mask |= ENDPTCTRL_RXE; /* enable */
159 data |= ENDPTCTRL_RXE;
161 hw_write(ci, OP_ENDPTCTRL + num, mask, data);
166 * hw_ep_get_halt: return endpoint halt status
167 * @num: endpoint number
168 * @dir: endpoint direction
170 * This function returns 1 if endpoint halted
172 static int hw_ep_get_halt(struct ci_hdrc *ci, int num, int dir)
174 u32 mask = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
176 return hw_read(ci, OP_ENDPTCTRL + num, mask) ? 1 : 0;
180 * hw_ep_prime: primes endpoint (execute without interruption)
181 * @num: endpoint number
182 * @dir: endpoint direction
183 * @is_ctrl: true if control endpoint
185 * This function returns an error code
187 static int hw_ep_prime(struct ci_hdrc *ci, int num, int dir, int is_ctrl)
189 int n = hw_ep_bit(num, dir);
191 if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
194 hw_write(ci, OP_ENDPTPRIME, ~0, BIT(n));
196 while (hw_read(ci, OP_ENDPTPRIME, BIT(n)))
198 if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
201 /* status shoult be tested according with manual but it doesn't work */
206 * hw_ep_set_halt: configures ep halt & resets data toggle after clear (execute
207 * without interruption)
208 * @num: endpoint number
209 * @dir: endpoint direction
210 * @value: true => stall, false => unstall
212 * This function returns an error code
214 static int hw_ep_set_halt(struct ci_hdrc *ci, int num, int dir, int value)
216 if (value != 0 && value != 1)
220 enum ci_hw_regs reg = OP_ENDPTCTRL + num;
221 u32 mask_xs = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
222 u32 mask_xr = dir ? ENDPTCTRL_TXR : ENDPTCTRL_RXR;
224 /* data toggle - reserved for EP0 but it's in ESS */
225 hw_write(ci, reg, mask_xs|mask_xr,
226 value ? mask_xs : mask_xr);
227 } while (value != hw_ep_get_halt(ci, num, dir));
233 * hw_is_port_high_speed: test if port is high speed
235 * This function returns true if high speed port
237 static int hw_port_is_high_speed(struct ci_hdrc *ci)
239 return ci->hw_bank.lpm ? hw_read(ci, OP_DEVLC, DEVLC_PSPD) :
240 hw_read(ci, OP_PORTSC, PORTSC_HSP);
244 * hw_test_and_clear_complete: test & clear complete status (execute without
246 * @n: endpoint number
248 * This function returns complete status
250 static int hw_test_and_clear_complete(struct ci_hdrc *ci, int n)
252 n = ep_to_bit(ci, n);
253 return hw_test_and_clear(ci, OP_ENDPTCOMPLETE, BIT(n));
257 * hw_test_and_clear_intr_active: test & clear active interrupts (execute
258 * without interruption)
260 * This function returns active interrutps
262 static u32 hw_test_and_clear_intr_active(struct ci_hdrc *ci)
264 u32 reg = hw_read_intr_status(ci) & hw_read_intr_enable(ci);
266 hw_write(ci, OP_USBSTS, ~0, reg);
271 * hw_test_and_clear_setup_guard: test & clear setup guard (execute without
274 * This function returns guard value
276 static int hw_test_and_clear_setup_guard(struct ci_hdrc *ci)
278 return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, 0);
282 * hw_test_and_set_setup_guard: test & set setup guard (execute without
285 * This function returns guard value
287 static int hw_test_and_set_setup_guard(struct ci_hdrc *ci)
289 return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, USBCMD_SUTW);
293 * hw_usb_set_address: configures USB address (execute without interruption)
294 * @value: new USB address
296 * This function explicitly sets the address, without the "USBADRA" (advance)
297 * feature, which is not supported by older versions of the controller.
299 static void hw_usb_set_address(struct ci_hdrc *ci, u8 value)
301 hw_write(ci, OP_DEVICEADDR, DEVICEADDR_USBADR,
302 value << __ffs(DEVICEADDR_USBADR));
306 * hw_usb_reset: restart device after a bus reset (execute without
309 * This function returns an error code
311 static int hw_usb_reset(struct ci_hdrc *ci)
313 hw_usb_set_address(ci, 0);
315 /* ESS flushes only at end?!? */
316 hw_write(ci, OP_ENDPTFLUSH, ~0, ~0);
318 /* clear setup token semaphores */
319 hw_write(ci, OP_ENDPTSETUPSTAT, 0, 0);
321 /* clear complete status */
322 hw_write(ci, OP_ENDPTCOMPLETE, 0, 0);
324 /* wait until all bits cleared */
325 while (hw_read(ci, OP_ENDPTPRIME, ~0))
326 udelay(10); /* not RTOS friendly */
328 /* reset all endpoints ? */
330 /* reset internal status and wait for further instructions
331 no need to verify the port reset status (ESS does it) */
336 /******************************************************************************
338 *****************************************************************************/
340 static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq,
345 struct td_node *lastnode, *node = kzalloc(sizeof(struct td_node),
351 node->ptr = dma_pool_zalloc(hwep->td_pool, GFP_ATOMIC,
353 if (node->ptr == NULL) {
358 node->ptr->token = cpu_to_le32(length << __ffs(TD_TOTAL_BYTES));
359 node->ptr->token &= cpu_to_le32(TD_TOTAL_BYTES);
360 node->ptr->token |= cpu_to_le32(TD_STATUS_ACTIVE);
361 if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX) {
362 u32 mul = hwreq->req.length / hwep->ep.maxpacket;
364 if (hwreq->req.length == 0
365 || hwreq->req.length % hwep->ep.maxpacket)
367 node->ptr->token |= mul << __ffs(TD_MULTO);
370 temp = (u32) (hwreq->req.dma + hwreq->req.actual);
372 node->ptr->page[0] = cpu_to_le32(temp);
373 for (i = 1; i < TD_PAGE_COUNT; i++) {
374 u32 page = temp + i * CI_HDRC_PAGE_SIZE;
375 page &= ~TD_RESERVED_MASK;
376 node->ptr->page[i] = cpu_to_le32(page);
380 hwreq->req.actual += length;
382 if (!list_empty(&hwreq->tds)) {
383 /* get the last entry */
384 lastnode = list_entry(hwreq->tds.prev,
386 lastnode->ptr->next = cpu_to_le32(node->dma);
389 INIT_LIST_HEAD(&node->td);
390 list_add_tail(&node->td, &hwreq->tds);
396 * _usb_addr: calculates endpoint address from direction & number
399 static inline u8 _usb_addr(struct ci_hw_ep *ep)
401 return ((ep->dir == TX) ? USB_ENDPOINT_DIR_MASK : 0) | ep->num;
405 * _hardware_enqueue: configures a request at hardware level
409 * This function returns an error code
411 static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
413 struct ci_hdrc *ci = hwep->ci;
415 unsigned rest = hwreq->req.length;
416 int pages = TD_PAGE_COUNT;
417 struct td_node *firstnode, *lastnode;
419 /* don't queue twice */
420 if (hwreq->req.status == -EALREADY)
423 hwreq->req.status = -EALREADY;
425 ret = usb_gadget_map_request(&ci->gadget, &hwreq->req, hwep->dir);
430 * The first buffer could be not page aligned.
431 * In that case we have to span into one extra td.
433 if (hwreq->req.dma % PAGE_SIZE)
437 ret = add_td_to_list(hwep, hwreq, 0);
443 unsigned count = min(hwreq->req.length - hwreq->req.actual,
444 (unsigned)(pages * CI_HDRC_PAGE_SIZE));
445 ret = add_td_to_list(hwep, hwreq, count);
452 if (hwreq->req.zero && hwreq->req.length && hwep->dir == TX
453 && (hwreq->req.length % hwep->ep.maxpacket == 0)) {
454 ret = add_td_to_list(hwep, hwreq, 0);
459 firstnode = list_first_entry(&hwreq->tds, struct td_node, td);
461 lastnode = list_entry(hwreq->tds.prev,
464 lastnode->ptr->next = cpu_to_le32(TD_TERMINATE);
465 if (!hwreq->req.no_interrupt)
466 lastnode->ptr->token |= cpu_to_le32(TD_IOC);
469 hwreq->req.actual = 0;
470 if (!list_empty(&hwep->qh.queue)) {
471 struct ci_hw_req *hwreqprev;
472 int n = hw_ep_bit(hwep->num, hwep->dir);
474 struct td_node *prevlastnode;
475 u32 next = firstnode->dma & TD_ADDR_MASK;
477 hwreqprev = list_entry(hwep->qh.queue.prev,
478 struct ci_hw_req, queue);
479 prevlastnode = list_entry(hwreqprev->tds.prev,
482 prevlastnode->ptr->next = cpu_to_le32(next);
484 if (hw_read(ci, OP_ENDPTPRIME, BIT(n)))
487 hw_write(ci, OP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW);
488 tmp_stat = hw_read(ci, OP_ENDPTSTAT, BIT(n));
489 } while (!hw_read(ci, OP_USBCMD, USBCMD_ATDTW));
490 hw_write(ci, OP_USBCMD, USBCMD_ATDTW, 0);
495 /* QH configuration */
496 hwep->qh.ptr->td.next = cpu_to_le32(firstnode->dma);
497 hwep->qh.ptr->td.token &=
498 cpu_to_le32(~(TD_STATUS_HALTED|TD_STATUS_ACTIVE));
500 if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == RX) {
501 u32 mul = hwreq->req.length / hwep->ep.maxpacket;
503 if (hwreq->req.length == 0
504 || hwreq->req.length % hwep->ep.maxpacket)
506 hwep->qh.ptr->cap |= mul << __ffs(QH_MULT);
509 wmb(); /* synchronize before ep prime */
511 ret = hw_ep_prime(ci, hwep->num, hwep->dir,
512 hwep->type == USB_ENDPOINT_XFER_CONTROL);
518 * free_pending_td: remove a pending request for the endpoint
521 static void free_pending_td(struct ci_hw_ep *hwep)
523 struct td_node *pending = hwep->pending_td;
525 dma_pool_free(hwep->td_pool, pending->ptr, pending->dma);
526 hwep->pending_td = NULL;
530 static int reprime_dtd(struct ci_hdrc *ci, struct ci_hw_ep *hwep,
531 struct td_node *node)
533 hwep->qh.ptr->td.next = node->dma;
534 hwep->qh.ptr->td.token &=
535 cpu_to_le32(~(TD_STATUS_HALTED | TD_STATUS_ACTIVE));
537 /* Synchronize before ep prime */
540 return hw_ep_prime(ci, hwep->num, hwep->dir,
541 hwep->type == USB_ENDPOINT_XFER_CONTROL);
545 * _hardware_dequeue: handles a request at hardware level
549 * This function returns an error code
551 static int _hardware_dequeue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
554 struct td_node *node, *tmpnode;
555 unsigned remaining_length;
556 unsigned actual = hwreq->req.length;
557 struct ci_hdrc *ci = hwep->ci;
559 if (hwreq->req.status != -EALREADY)
562 hwreq->req.status = 0;
564 list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
565 tmptoken = le32_to_cpu(node->ptr->token);
566 if ((TD_STATUS_ACTIVE & tmptoken) != 0) {
567 int n = hw_ep_bit(hwep->num, hwep->dir);
569 if (ci->rev == CI_REVISION_24)
570 if (!hw_read(ci, OP_ENDPTSTAT, BIT(n)))
571 reprime_dtd(ci, hwep, node);
572 hwreq->req.status = -EALREADY;
576 remaining_length = (tmptoken & TD_TOTAL_BYTES);
577 remaining_length >>= __ffs(TD_TOTAL_BYTES);
578 actual -= remaining_length;
580 hwreq->req.status = tmptoken & TD_STATUS;
581 if ((TD_STATUS_HALTED & hwreq->req.status)) {
582 hwreq->req.status = -EPIPE;
584 } else if ((TD_STATUS_DT_ERR & hwreq->req.status)) {
585 hwreq->req.status = -EPROTO;
587 } else if ((TD_STATUS_TR_ERR & hwreq->req.status)) {
588 hwreq->req.status = -EILSEQ;
592 if (remaining_length) {
594 hwreq->req.status = -EPROTO;
599 * As the hardware could still address the freed td
600 * which will run the udc unusable, the cleanup of the
601 * td has to be delayed by one.
603 if (hwep->pending_td)
604 free_pending_td(hwep);
606 hwep->pending_td = node;
607 list_del_init(&node->td);
610 usb_gadget_unmap_request(&hwep->ci->gadget, &hwreq->req, hwep->dir);
612 hwreq->req.actual += actual;
614 if (hwreq->req.status)
615 return hwreq->req.status;
617 return hwreq->req.actual;
621 * _ep_nuke: dequeues all endpoint requests
624 * This function returns an error code
625 * Caller must hold lock
627 static int _ep_nuke(struct ci_hw_ep *hwep)
628 __releases(hwep->lock)
629 __acquires(hwep->lock)
631 struct td_node *node, *tmpnode;
635 hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
637 while (!list_empty(&hwep->qh.queue)) {
639 /* pop oldest request */
640 struct ci_hw_req *hwreq = list_entry(hwep->qh.queue.next,
641 struct ci_hw_req, queue);
643 list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
644 dma_pool_free(hwep->td_pool, node->ptr, node->dma);
645 list_del_init(&node->td);
650 list_del_init(&hwreq->queue);
651 hwreq->req.status = -ESHUTDOWN;
653 if (hwreq->req.complete != NULL) {
654 spin_unlock(hwep->lock);
655 usb_gadget_giveback_request(&hwep->ep, &hwreq->req);
656 spin_lock(hwep->lock);
660 if (hwep->pending_td)
661 free_pending_td(hwep);
666 static int _ep_set_halt(struct usb_ep *ep, int value, bool check_transfer)
668 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
669 int direction, retval = 0;
672 if (ep == NULL || hwep->ep.desc == NULL)
675 if (usb_endpoint_xfer_isoc(hwep->ep.desc))
678 spin_lock_irqsave(hwep->lock, flags);
680 if (value && hwep->dir == TX && check_transfer &&
681 !list_empty(&hwep->qh.queue) &&
682 !usb_endpoint_xfer_control(hwep->ep.desc)) {
683 spin_unlock_irqrestore(hwep->lock, flags);
687 direction = hwep->dir;
689 retval |= hw_ep_set_halt(hwep->ci, hwep->num, hwep->dir, value);
694 if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
695 hwep->dir = (hwep->dir == TX) ? RX : TX;
697 } while (hwep->dir != direction);
699 spin_unlock_irqrestore(hwep->lock, flags);
705 * _gadget_stop_activity: stops all USB activity, flushes & disables all endpts
708 * This function returns an error code
710 static int _gadget_stop_activity(struct usb_gadget *gadget)
713 struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
716 spin_lock_irqsave(&ci->lock, flags);
717 ci->gadget.speed = USB_SPEED_UNKNOWN;
718 ci->remote_wakeup = 0;
720 spin_unlock_irqrestore(&ci->lock, flags);
722 /* flush all endpoints */
723 gadget_for_each_ep(ep, gadget) {
724 usb_ep_fifo_flush(ep);
726 usb_ep_fifo_flush(&ci->ep0out->ep);
727 usb_ep_fifo_flush(&ci->ep0in->ep);
729 /* make sure to disable all endpoints */
730 gadget_for_each_ep(ep, gadget) {
734 if (ci->status != NULL) {
735 usb_ep_free_request(&ci->ep0in->ep, ci->status);
742 /******************************************************************************
744 *****************************************************************************/
746 * isr_reset_handler: USB reset interrupt handler
749 * This function resets USB engine after a bus reset occurred
751 static void isr_reset_handler(struct ci_hdrc *ci)
757 spin_unlock(&ci->lock);
758 if (ci->gadget.speed != USB_SPEED_UNKNOWN)
759 usb_gadget_udc_reset(&ci->gadget, ci->driver);
761 retval = _gadget_stop_activity(&ci->gadget);
765 retval = hw_usb_reset(ci);
769 ci->status = usb_ep_alloc_request(&ci->ep0in->ep, GFP_ATOMIC);
770 if (ci->status == NULL)
774 spin_lock(&ci->lock);
777 dev_err(ci->dev, "error: %i\n", retval);
781 * isr_get_status_complete: get_status request complete function
783 * @req: request handled
785 * Caller must release lock
787 static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req)
789 if (ep == NULL || req == NULL)
793 usb_ep_free_request(ep, req);
797 * _ep_queue: queues (submits) an I/O request to an endpoint
800 * @gfp_flags: GFP flags (not used)
802 * Caller must hold lock
803 * This function returns an error code
805 static int _ep_queue(struct usb_ep *ep, struct usb_request *req,
806 gfp_t __maybe_unused gfp_flags)
808 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
809 struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req);
810 struct ci_hdrc *ci = hwep->ci;
813 if (ep == NULL || req == NULL || hwep->ep.desc == NULL)
816 if (hwep->type == USB_ENDPOINT_XFER_CONTROL) {
818 hwep = (ci->ep0_dir == RX) ?
819 ci->ep0out : ci->ep0in;
820 if (!list_empty(&hwep->qh.queue)) {
822 dev_warn(hwep->ci->dev, "endpoint ctrl %X nuked\n",
827 if (usb_endpoint_xfer_isoc(hwep->ep.desc) &&
828 hwreq->req.length > (1 + hwep->ep.mult) * hwep->ep.maxpacket) {
829 dev_err(hwep->ci->dev, "request length too big for isochronous\n");
833 /* first nuke then test link, e.g. previous status has not sent */
834 if (!list_empty(&hwreq->queue)) {
835 dev_err(hwep->ci->dev, "request already in queue\n");
840 hwreq->req.status = -EINPROGRESS;
841 hwreq->req.actual = 0;
843 retval = _hardware_enqueue(hwep, hwreq);
845 if (retval == -EALREADY)
848 list_add_tail(&hwreq->queue, &hwep->qh.queue);
854 * isr_get_status_response: get_status request response
856 * @setup: setup request packet
858 * This function returns an error code
860 static int isr_get_status_response(struct ci_hdrc *ci,
861 struct usb_ctrlrequest *setup)
862 __releases(hwep->lock)
863 __acquires(hwep->lock)
865 struct ci_hw_ep *hwep = ci->ep0in;
866 struct usb_request *req = NULL;
867 gfp_t gfp_flags = GFP_ATOMIC;
868 int dir, num, retval;
870 if (hwep == NULL || setup == NULL)
873 spin_unlock(hwep->lock);
874 req = usb_ep_alloc_request(&hwep->ep, gfp_flags);
875 spin_lock(hwep->lock);
879 req->complete = isr_get_status_complete;
881 req->buf = kzalloc(req->length, gfp_flags);
882 if (req->buf == NULL) {
887 if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
888 *(u16 *)req->buf = (ci->remote_wakeup << 1) |
889 ci->gadget.is_selfpowered;
890 } else if ((setup->bRequestType & USB_RECIP_MASK) \
891 == USB_RECIP_ENDPOINT) {
892 dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ?
894 num = le16_to_cpu(setup->wIndex) & USB_ENDPOINT_NUMBER_MASK;
895 *(u16 *)req->buf = hw_ep_get_halt(ci, num, dir);
897 /* else do nothing; reserved for future use */
899 retval = _ep_queue(&hwep->ep, req, gfp_flags);
908 spin_unlock(hwep->lock);
909 usb_ep_free_request(&hwep->ep, req);
910 spin_lock(hwep->lock);
915 * isr_setup_status_complete: setup_status request complete function
917 * @req: request handled
919 * Caller must release lock. Put the port in test mode if test mode
920 * feature is selected.
923 isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req)
925 struct ci_hdrc *ci = req->context;
929 hw_usb_set_address(ci, ci->address);
932 usb_gadget_set_state(&ci->gadget, USB_STATE_ADDRESS);
935 spin_lock_irqsave(&ci->lock, flags);
937 hw_port_test_set(ci, ci->test_mode);
938 spin_unlock_irqrestore(&ci->lock, flags);
942 * isr_setup_status_phase: queues the status phase of a setup transation
945 * This function returns an error code
947 static int isr_setup_status_phase(struct ci_hdrc *ci)
950 struct ci_hw_ep *hwep;
952 hwep = (ci->ep0_dir == TX) ? ci->ep0out : ci->ep0in;
953 ci->status->context = ci;
954 ci->status->complete = isr_setup_status_complete;
956 retval = _ep_queue(&hwep->ep, ci->status, GFP_ATOMIC);
962 * isr_tr_complete_low: transaction complete low level handler
965 * This function returns an error code
966 * Caller must hold lock
968 static int isr_tr_complete_low(struct ci_hw_ep *hwep)
969 __releases(hwep->lock)
970 __acquires(hwep->lock)
972 struct ci_hw_req *hwreq, *hwreqtemp;
973 struct ci_hw_ep *hweptemp = hwep;
976 list_for_each_entry_safe(hwreq, hwreqtemp, &hwep->qh.queue,
978 retval = _hardware_dequeue(hwep, hwreq);
981 list_del_init(&hwreq->queue);
982 if (hwreq->req.complete != NULL) {
983 spin_unlock(hwep->lock);
984 if ((hwep->type == USB_ENDPOINT_XFER_CONTROL) &&
986 hweptemp = hwep->ci->ep0in;
987 usb_gadget_giveback_request(&hweptemp->ep, &hwreq->req);
988 spin_lock(hwep->lock);
992 if (retval == -EBUSY)
998 static int otg_a_alt_hnp_support(struct ci_hdrc *ci)
1000 dev_warn(&ci->gadget.dev,
1001 "connect the device to an alternate port if you want HNP\n");
1002 return isr_setup_status_phase(ci);
1006 * isr_setup_packet_handler: setup packet handler
1007 * @ci: UDC descriptor
1009 * This function handles setup packet
1011 static void isr_setup_packet_handler(struct ci_hdrc *ci)
1012 __releases(ci->lock)
1013 __acquires(ci->lock)
1015 struct ci_hw_ep *hwep = &ci->ci_hw_ep[0];
1016 struct usb_ctrlrequest req;
1017 int type, num, dir, err = -EINVAL;
1021 * Flush data and handshake transactions of previous
1024 _ep_nuke(ci->ep0out);
1025 _ep_nuke(ci->ep0in);
1027 /* read_setup_packet */
1029 hw_test_and_set_setup_guard(ci);
1030 memcpy(&req, &hwep->qh.ptr->setup, sizeof(req));
1031 } while (!hw_test_and_clear_setup_guard(ci));
1033 type = req.bRequestType;
1035 ci->ep0_dir = (type & USB_DIR_IN) ? TX : RX;
1037 switch (req.bRequest) {
1038 case USB_REQ_CLEAR_FEATURE:
1039 if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
1040 le16_to_cpu(req.wValue) ==
1041 USB_ENDPOINT_HALT) {
1042 if (req.wLength != 0)
1044 num = le16_to_cpu(req.wIndex);
1045 dir = num & USB_ENDPOINT_DIR_MASK;
1046 num &= USB_ENDPOINT_NUMBER_MASK;
1048 num += ci->hw_ep_max / 2;
1049 if (!ci->ci_hw_ep[num].wedge) {
1050 spin_unlock(&ci->lock);
1051 err = usb_ep_clear_halt(
1052 &ci->ci_hw_ep[num].ep);
1053 spin_lock(&ci->lock);
1057 err = isr_setup_status_phase(ci);
1058 } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) &&
1059 le16_to_cpu(req.wValue) ==
1060 USB_DEVICE_REMOTE_WAKEUP) {
1061 if (req.wLength != 0)
1063 ci->remote_wakeup = 0;
1064 err = isr_setup_status_phase(ci);
1069 case USB_REQ_GET_STATUS:
1070 if ((type != (USB_DIR_IN|USB_RECIP_DEVICE) ||
1071 le16_to_cpu(req.wIndex) == OTG_STS_SELECTOR) &&
1072 type != (USB_DIR_IN|USB_RECIP_ENDPOINT) &&
1073 type != (USB_DIR_IN|USB_RECIP_INTERFACE))
1075 if (le16_to_cpu(req.wLength) != 2 ||
1076 le16_to_cpu(req.wValue) != 0)
1078 err = isr_get_status_response(ci, &req);
1080 case USB_REQ_SET_ADDRESS:
1081 if (type != (USB_DIR_OUT|USB_RECIP_DEVICE))
1083 if (le16_to_cpu(req.wLength) != 0 ||
1084 le16_to_cpu(req.wIndex) != 0)
1086 ci->address = (u8)le16_to_cpu(req.wValue);
1088 err = isr_setup_status_phase(ci);
1090 case USB_REQ_SET_FEATURE:
1091 if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
1092 le16_to_cpu(req.wValue) ==
1093 USB_ENDPOINT_HALT) {
1094 if (req.wLength != 0)
1096 num = le16_to_cpu(req.wIndex);
1097 dir = num & USB_ENDPOINT_DIR_MASK;
1098 num &= USB_ENDPOINT_NUMBER_MASK;
1100 num += ci->hw_ep_max / 2;
1102 spin_unlock(&ci->lock);
1103 err = _ep_set_halt(&ci->ci_hw_ep[num].ep, 1, false);
1104 spin_lock(&ci->lock);
1106 isr_setup_status_phase(ci);
1107 } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) {
1108 if (req.wLength != 0)
1110 switch (le16_to_cpu(req.wValue)) {
1111 case USB_DEVICE_REMOTE_WAKEUP:
1112 ci->remote_wakeup = 1;
1113 err = isr_setup_status_phase(ci);
1115 case USB_DEVICE_TEST_MODE:
1116 tmode = le16_to_cpu(req.wIndex) >> 8;
1123 ci->test_mode = tmode;
1124 err = isr_setup_status_phase(
1131 case USB_DEVICE_B_HNP_ENABLE:
1132 if (ci_otg_is_fsm_mode(ci)) {
1133 ci->gadget.b_hnp_enable = 1;
1134 err = isr_setup_status_phase(
1138 case USB_DEVICE_A_ALT_HNP_SUPPORT:
1139 if (ci_otg_is_fsm_mode(ci))
1140 err = otg_a_alt_hnp_support(ci);
1142 case USB_DEVICE_A_HNP_SUPPORT:
1143 if (ci_otg_is_fsm_mode(ci)) {
1144 ci->gadget.a_hnp_support = 1;
1145 err = isr_setup_status_phase(
1158 if (req.wLength == 0) /* no data phase */
1161 spin_unlock(&ci->lock);
1162 err = ci->driver->setup(&ci->gadget, &req);
1163 spin_lock(&ci->lock);
1168 spin_unlock(&ci->lock);
1169 if (_ep_set_halt(&hwep->ep, 1, false))
1170 dev_err(ci->dev, "error: _ep_set_halt\n");
1171 spin_lock(&ci->lock);
1176 * isr_tr_complete_handler: transaction complete interrupt handler
1177 * @ci: UDC descriptor
1179 * This function handles traffic events
1181 static void isr_tr_complete_handler(struct ci_hdrc *ci)
1182 __releases(ci->lock)
1183 __acquires(ci->lock)
1188 for (i = 0; i < ci->hw_ep_max; i++) {
1189 struct ci_hw_ep *hwep = &ci->ci_hw_ep[i];
1191 if (hwep->ep.desc == NULL)
1192 continue; /* not configured */
1194 if (hw_test_and_clear_complete(ci, i)) {
1195 err = isr_tr_complete_low(hwep);
1196 if (hwep->type == USB_ENDPOINT_XFER_CONTROL) {
1197 if (err > 0) /* needs status phase */
1198 err = isr_setup_status_phase(ci);
1200 spin_unlock(&ci->lock);
1201 if (_ep_set_halt(&hwep->ep, 1, false))
1203 "error: _ep_set_halt\n");
1204 spin_lock(&ci->lock);
1209 /* Only handle setup packet below */
1211 hw_test_and_clear(ci, OP_ENDPTSETUPSTAT, BIT(0)))
1212 isr_setup_packet_handler(ci);
1216 /******************************************************************************
1218 *****************************************************************************/
1220 * ep_enable: configure endpoint, making it usable
1222 * Check usb_ep_enable() at "usb_gadget.h" for details
1224 static int ep_enable(struct usb_ep *ep,
1225 const struct usb_endpoint_descriptor *desc)
1227 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1229 unsigned long flags;
1232 if (ep == NULL || desc == NULL)
1235 spin_lock_irqsave(hwep->lock, flags);
1237 /* only internal SW should enable ctrl endpts */
1239 if (!list_empty(&hwep->qh.queue)) {
1240 dev_warn(hwep->ci->dev, "enabling a non-empty endpoint!\n");
1241 spin_unlock_irqrestore(hwep->lock, flags);
1245 hwep->ep.desc = desc;
1247 hwep->dir = usb_endpoint_dir_in(desc) ? TX : RX;
1248 hwep->num = usb_endpoint_num(desc);
1249 hwep->type = usb_endpoint_type(desc);
1251 hwep->ep.maxpacket = usb_endpoint_maxp(desc) & 0x07ff;
1252 hwep->ep.mult = QH_ISO_MULT(usb_endpoint_maxp(desc));
1254 if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
1258 cap |= (hwep->ep.maxpacket << __ffs(QH_MAX_PKT)) & QH_MAX_PKT;
1260 * For ISO-TX, we set mult at QH as the largest value, and use
1261 * MultO at TD as real mult value.
1263 if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX)
1264 cap |= 3 << __ffs(QH_MULT);
1266 hwep->qh.ptr->cap = cpu_to_le32(cap);
1268 hwep->qh.ptr->td.next |= cpu_to_le32(TD_TERMINATE); /* needed? */
1270 if (hwep->num != 0 && hwep->type == USB_ENDPOINT_XFER_CONTROL) {
1271 dev_err(hwep->ci->dev, "Set control xfer at non-ep0\n");
1276 * Enable endpoints in the HW other than ep0 as ep0
1280 retval |= hw_ep_enable(hwep->ci, hwep->num, hwep->dir,
1283 spin_unlock_irqrestore(hwep->lock, flags);
1288 * ep_disable: endpoint is no longer usable
1290 * Check usb_ep_disable() at "usb_gadget.h" for details
1292 static int ep_disable(struct usb_ep *ep)
1294 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1295 int direction, retval = 0;
1296 unsigned long flags;
1300 else if (hwep->ep.desc == NULL)
1303 spin_lock_irqsave(hwep->lock, flags);
1305 /* only internal SW should disable ctrl endpts */
1307 direction = hwep->dir;
1309 retval |= _ep_nuke(hwep);
1310 retval |= hw_ep_disable(hwep->ci, hwep->num, hwep->dir);
1312 if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
1313 hwep->dir = (hwep->dir == TX) ? RX : TX;
1315 } while (hwep->dir != direction);
1317 hwep->ep.desc = NULL;
1319 spin_unlock_irqrestore(hwep->lock, flags);
1324 * ep_alloc_request: allocate a request object to use with this endpoint
1326 * Check usb_ep_alloc_request() at "usb_gadget.h" for details
1328 static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
1330 struct ci_hw_req *hwreq = NULL;
1335 hwreq = kzalloc(sizeof(struct ci_hw_req), gfp_flags);
1336 if (hwreq != NULL) {
1337 INIT_LIST_HEAD(&hwreq->queue);
1338 INIT_LIST_HEAD(&hwreq->tds);
1341 return (hwreq == NULL) ? NULL : &hwreq->req;
1345 * ep_free_request: frees a request object
1347 * Check usb_ep_free_request() at "usb_gadget.h" for details
1349 static void ep_free_request(struct usb_ep *ep, struct usb_request *req)
1351 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1352 struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req);
1353 struct td_node *node, *tmpnode;
1354 unsigned long flags;
1356 if (ep == NULL || req == NULL) {
1358 } else if (!list_empty(&hwreq->queue)) {
1359 dev_err(hwep->ci->dev, "freeing queued request\n");
1363 spin_lock_irqsave(hwep->lock, flags);
1365 list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
1366 dma_pool_free(hwep->td_pool, node->ptr, node->dma);
1367 list_del_init(&node->td);
1374 spin_unlock_irqrestore(hwep->lock, flags);
1378 * ep_queue: queues (submits) an I/O request to an endpoint
1380 * Check usb_ep_queue()* at usb_gadget.h" for details
1382 static int ep_queue(struct usb_ep *ep, struct usb_request *req,
1383 gfp_t __maybe_unused gfp_flags)
1385 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1387 unsigned long flags;
1389 if (ep == NULL || req == NULL || hwep->ep.desc == NULL)
1392 spin_lock_irqsave(hwep->lock, flags);
1393 retval = _ep_queue(ep, req, gfp_flags);
1394 spin_unlock_irqrestore(hwep->lock, flags);
1399 * ep_dequeue: dequeues (cancels, unlinks) an I/O request from an endpoint
1401 * Check usb_ep_dequeue() at "usb_gadget.h" for details
1403 static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
1405 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1406 struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req);
1407 unsigned long flags;
1408 struct td_node *node, *tmpnode;
1410 if (ep == NULL || req == NULL || hwreq->req.status != -EALREADY ||
1411 hwep->ep.desc == NULL || list_empty(&hwreq->queue) ||
1412 list_empty(&hwep->qh.queue))
1415 spin_lock_irqsave(hwep->lock, flags);
1417 hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
1419 list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
1420 dma_pool_free(hwep->td_pool, node->ptr, node->dma);
1421 list_del(&node->td);
1426 list_del_init(&hwreq->queue);
1428 usb_gadget_unmap_request(&hwep->ci->gadget, req, hwep->dir);
1430 req->status = -ECONNRESET;
1432 if (hwreq->req.complete != NULL) {
1433 spin_unlock(hwep->lock);
1434 usb_gadget_giveback_request(&hwep->ep, &hwreq->req);
1435 spin_lock(hwep->lock);
1438 spin_unlock_irqrestore(hwep->lock, flags);
1443 * ep_set_halt: sets the endpoint halt feature
1445 * Check usb_ep_set_halt() at "usb_gadget.h" for details
1447 static int ep_set_halt(struct usb_ep *ep, int value)
1449 return _ep_set_halt(ep, value, true);
1453 * ep_set_wedge: sets the halt feature and ignores clear requests
1455 * Check usb_ep_set_wedge() at "usb_gadget.h" for details
1457 static int ep_set_wedge(struct usb_ep *ep)
1459 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1460 unsigned long flags;
1462 if (ep == NULL || hwep->ep.desc == NULL)
1465 spin_lock_irqsave(hwep->lock, flags);
1467 spin_unlock_irqrestore(hwep->lock, flags);
1469 return usb_ep_set_halt(ep);
1473 * ep_fifo_flush: flushes contents of a fifo
1475 * Check usb_ep_fifo_flush() at "usb_gadget.h" for details
1477 static void ep_fifo_flush(struct usb_ep *ep)
1479 struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1480 unsigned long flags;
1483 dev_err(hwep->ci->dev, "%02X: -EINVAL\n", _usb_addr(hwep));
1487 spin_lock_irqsave(hwep->lock, flags);
1489 hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
1491 spin_unlock_irqrestore(hwep->lock, flags);
1495 * Endpoint-specific part of the API to the USB controller hardware
1496 * Check "usb_gadget.h" for details
1498 static const struct usb_ep_ops usb_ep_ops = {
1499 .enable = ep_enable,
1500 .disable = ep_disable,
1501 .alloc_request = ep_alloc_request,
1502 .free_request = ep_free_request,
1504 .dequeue = ep_dequeue,
1505 .set_halt = ep_set_halt,
1506 .set_wedge = ep_set_wedge,
1507 .fifo_flush = ep_fifo_flush,
1510 /******************************************************************************
1512 *****************************************************************************/
1513 static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
1515 struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
1516 unsigned long flags;
1517 int gadget_ready = 0;
1519 spin_lock_irqsave(&ci->lock, flags);
1520 ci->vbus_active = is_active;
1523 spin_unlock_irqrestore(&ci->lock, flags);
1527 pm_runtime_get_sync(&_gadget->dev);
1528 hw_device_reset(ci);
1529 hw_device_state(ci, ci->ep0out->qh.dma);
1530 usb_gadget_set_state(_gadget, USB_STATE_POWERED);
1531 usb_udc_vbus_handler(_gadget, true);
1533 usb_udc_vbus_handler(_gadget, false);
1535 ci->driver->disconnect(&ci->gadget);
1536 hw_device_state(ci, 0);
1537 if (ci->platdata->notify_event)
1538 ci->platdata->notify_event(ci,
1539 CI_HDRC_CONTROLLER_STOPPED_EVENT);
1540 _gadget_stop_activity(&ci->gadget);
1541 pm_runtime_put_sync(&_gadget->dev);
1542 usb_gadget_set_state(_gadget, USB_STATE_NOTATTACHED);
1549 static int ci_udc_wakeup(struct usb_gadget *_gadget)
1551 struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
1552 unsigned long flags;
1555 spin_lock_irqsave(&ci->lock, flags);
1556 if (!ci->remote_wakeup) {
1560 if (!hw_read(ci, OP_PORTSC, PORTSC_SUSP)) {
1564 hw_write(ci, OP_PORTSC, PORTSC_FPR, PORTSC_FPR);
1566 spin_unlock_irqrestore(&ci->lock, flags);
1570 static int ci_udc_vbus_draw(struct usb_gadget *_gadget, unsigned ma)
1572 struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
1575 return usb_phy_set_power(ci->usb_phy, ma);
1579 static int ci_udc_selfpowered(struct usb_gadget *_gadget, int is_on)
1581 struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
1582 struct ci_hw_ep *hwep = ci->ep0in;
1583 unsigned long flags;
1585 spin_lock_irqsave(hwep->lock, flags);
1586 _gadget->is_selfpowered = (is_on != 0);
1587 spin_unlock_irqrestore(hwep->lock, flags);
1592 /* Change Data+ pullup status
1593 * this func is used by usb_gadget_connect/disconnet
1595 static int ci_udc_pullup(struct usb_gadget *_gadget, int is_on)
1597 struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
1599 /* Data+ pullup controlled by OTG state machine in OTG fsm mode */
1600 if (ci_otg_is_fsm_mode(ci))
1603 pm_runtime_get_sync(&ci->gadget.dev);
1605 hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
1607 hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
1608 pm_runtime_put_sync(&ci->gadget.dev);
1613 static int ci_udc_start(struct usb_gadget *gadget,
1614 struct usb_gadget_driver *driver);
1615 static int ci_udc_stop(struct usb_gadget *gadget);
1617 * Device operations part of the API to the USB controller hardware,
1618 * which don't involve endpoints (or i/o)
1619 * Check "usb_gadget.h" for details
1621 static const struct usb_gadget_ops usb_gadget_ops = {
1622 .vbus_session = ci_udc_vbus_session,
1623 .wakeup = ci_udc_wakeup,
1624 .set_selfpowered = ci_udc_selfpowered,
1625 .pullup = ci_udc_pullup,
1626 .vbus_draw = ci_udc_vbus_draw,
1627 .udc_start = ci_udc_start,
1628 .udc_stop = ci_udc_stop,
1631 static int init_eps(struct ci_hdrc *ci)
1633 int retval = 0, i, j;
1635 for (i = 0; i < ci->hw_ep_max/2; i++)
1636 for (j = RX; j <= TX; j++) {
1637 int k = i + j * ci->hw_ep_max/2;
1638 struct ci_hw_ep *hwep = &ci->ci_hw_ep[k];
1640 scnprintf(hwep->name, sizeof(hwep->name), "ep%i%s", i,
1641 (j == TX) ? "in" : "out");
1644 hwep->lock = &ci->lock;
1645 hwep->td_pool = ci->td_pool;
1647 hwep->ep.name = hwep->name;
1648 hwep->ep.ops = &usb_ep_ops;
1651 hwep->ep.caps.type_control = true;
1653 hwep->ep.caps.type_iso = true;
1654 hwep->ep.caps.type_bulk = true;
1655 hwep->ep.caps.type_int = true;
1659 hwep->ep.caps.dir_in = true;
1661 hwep->ep.caps.dir_out = true;
1664 * for ep0: maxP defined in desc, for other
1665 * eps, maxP is set by epautoconfig() called
1668 usb_ep_set_maxpacket_limit(&hwep->ep, (unsigned short)~0);
1670 INIT_LIST_HEAD(&hwep->qh.queue);
1671 hwep->qh.ptr = dma_pool_alloc(ci->qh_pool, GFP_KERNEL,
1673 if (hwep->qh.ptr == NULL)
1676 memset(hwep->qh.ptr, 0, sizeof(*hwep->qh.ptr));
1679 * set up shorthands for ep0 out and in endpoints,
1680 * don't add to gadget's ep_list
1688 usb_ep_set_maxpacket_limit(&hwep->ep, CTRL_PAYLOAD_MAX);
1692 list_add_tail(&hwep->ep.ep_list, &ci->gadget.ep_list);
1698 static void destroy_eps(struct ci_hdrc *ci)
1702 for (i = 0; i < ci->hw_ep_max; i++) {
1703 struct ci_hw_ep *hwep = &ci->ci_hw_ep[i];
1705 if (hwep->pending_td)
1706 free_pending_td(hwep);
1707 dma_pool_free(ci->qh_pool, hwep->qh.ptr, hwep->qh.dma);
1712 * ci_udc_start: register a gadget driver
1713 * @gadget: our gadget
1714 * @driver: the driver being registered
1716 * Interrupts are enabled here.
1718 static int ci_udc_start(struct usb_gadget *gadget,
1719 struct usb_gadget_driver *driver)
1721 struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
1722 unsigned long flags;
1723 int retval = -ENOMEM;
1725 if (driver->disconnect == NULL)
1729 ci->ep0out->ep.desc = &ctrl_endpt_out_desc;
1730 retval = usb_ep_enable(&ci->ep0out->ep);
1734 ci->ep0in->ep.desc = &ctrl_endpt_in_desc;
1735 retval = usb_ep_enable(&ci->ep0in->ep);
1739 ci->driver = driver;
1741 /* Start otg fsm for B-device */
1742 if (ci_otg_is_fsm_mode(ci) && ci->fsm.id) {
1743 ci_hdrc_otg_fsm_start(ci);
1747 pm_runtime_get_sync(&ci->gadget.dev);
1748 if (ci->vbus_active) {
1749 spin_lock_irqsave(&ci->lock, flags);
1750 hw_device_reset(ci);
1752 usb_udc_vbus_handler(&ci->gadget, false);
1753 pm_runtime_put_sync(&ci->gadget.dev);
1757 retval = hw_device_state(ci, ci->ep0out->qh.dma);
1758 spin_unlock_irqrestore(&ci->lock, flags);
1760 pm_runtime_put_sync(&ci->gadget.dev);
1765 static void ci_udc_stop_for_otg_fsm(struct ci_hdrc *ci)
1767 if (!ci_otg_is_fsm_mode(ci))
1770 mutex_lock(&ci->fsm.lock);
1771 if (ci->fsm.otg->state == OTG_STATE_A_PERIPHERAL) {
1772 ci->fsm.a_bidl_adis_tmout = 1;
1773 ci_hdrc_otg_fsm_start(ci);
1774 } else if (ci->fsm.otg->state == OTG_STATE_B_PERIPHERAL) {
1775 ci->fsm.protocol = PROTO_UNDEF;
1776 ci->fsm.otg->state = OTG_STATE_UNDEFINED;
1778 mutex_unlock(&ci->fsm.lock);
1782 * ci_udc_stop: unregister a gadget driver
1784 static int ci_udc_stop(struct usb_gadget *gadget)
1786 struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
1787 unsigned long flags;
1789 spin_lock_irqsave(&ci->lock, flags);
1791 if (ci->vbus_active) {
1792 hw_device_state(ci, 0);
1793 if (ci->platdata->notify_event)
1794 ci->platdata->notify_event(ci,
1795 CI_HDRC_CONTROLLER_STOPPED_EVENT);
1796 spin_unlock_irqrestore(&ci->lock, flags);
1797 _gadget_stop_activity(&ci->gadget);
1798 spin_lock_irqsave(&ci->lock, flags);
1799 pm_runtime_put(&ci->gadget.dev);
1803 spin_unlock_irqrestore(&ci->lock, flags);
1805 ci_udc_stop_for_otg_fsm(ci);
1809 /******************************************************************************
1811 *****************************************************************************/
1813 * udc_irq: ci interrupt handler
1815 * This function returns IRQ_HANDLED if the IRQ has been handled
1816 * It locks access to registers
1818 static irqreturn_t udc_irq(struct ci_hdrc *ci)
1826 spin_lock(&ci->lock);
1828 if (ci->platdata->flags & CI_HDRC_REGS_SHARED) {
1829 if (hw_read(ci, OP_USBMODE, USBMODE_CM) !=
1831 spin_unlock(&ci->lock);
1835 intr = hw_test_and_clear_intr_active(ci);
1838 /* order defines priority - do NOT change it */
1839 if (USBi_URI & intr)
1840 isr_reset_handler(ci);
1842 if (USBi_PCI & intr) {
1843 ci->gadget.speed = hw_port_is_high_speed(ci) ?
1844 USB_SPEED_HIGH : USB_SPEED_FULL;
1845 if (ci->suspended && ci->driver->resume) {
1846 spin_unlock(&ci->lock);
1847 ci->driver->resume(&ci->gadget);
1848 spin_lock(&ci->lock);
1854 isr_tr_complete_handler(ci);
1856 if (USBi_SLI & intr) {
1857 if (ci->gadget.speed != USB_SPEED_UNKNOWN &&
1858 ci->driver->suspend) {
1860 spin_unlock(&ci->lock);
1861 ci->driver->suspend(&ci->gadget);
1862 usb_gadget_set_state(&ci->gadget,
1863 USB_STATE_SUSPENDED);
1864 spin_lock(&ci->lock);
1867 retval = IRQ_HANDLED;
1871 spin_unlock(&ci->lock);
1877 * udc_start: initialize gadget role
1878 * @ci: chipidea controller
1880 static int udc_start(struct ci_hdrc *ci)
1882 struct device *dev = ci->dev;
1883 struct usb_otg_caps *otg_caps = &ci->platdata->ci_otg_caps;
1886 spin_lock_init(&ci->lock);
1888 ci->gadget.ops = &usb_gadget_ops;
1889 ci->gadget.speed = USB_SPEED_UNKNOWN;
1890 ci->gadget.max_speed = USB_SPEED_HIGH;
1891 ci->gadget.name = ci->platdata->name;
1892 ci->gadget.otg_caps = otg_caps;
1894 if (ci->is_otg && (otg_caps->hnp_support || otg_caps->srp_support ||
1895 otg_caps->adp_support))
1896 ci->gadget.is_otg = 1;
1898 INIT_LIST_HEAD(&ci->gadget.ep_list);
1900 /* alloc resources */
1901 ci->qh_pool = dma_pool_create("ci_hw_qh", dev,
1902 sizeof(struct ci_hw_qh),
1903 64, CI_HDRC_PAGE_SIZE);
1904 if (ci->qh_pool == NULL)
1907 ci->td_pool = dma_pool_create("ci_hw_td", dev,
1908 sizeof(struct ci_hw_td),
1909 64, CI_HDRC_PAGE_SIZE);
1910 if (ci->td_pool == NULL) {
1915 retval = init_eps(ci);
1919 ci->gadget.ep0 = &ci->ep0in->ep;
1921 retval = usb_add_gadget_udc(dev, &ci->gadget);
1925 pm_runtime_no_callbacks(&ci->gadget.dev);
1926 pm_runtime_enable(&ci->gadget.dev);
1933 dma_pool_destroy(ci->td_pool);
1935 dma_pool_destroy(ci->qh_pool);
1940 * ci_hdrc_gadget_destroy: parent remove must call this to remove UDC
1942 * No interrupts active, the IRQ has been released
1944 void ci_hdrc_gadget_destroy(struct ci_hdrc *ci)
1946 if (!ci->roles[CI_ROLE_GADGET])
1949 usb_del_gadget_udc(&ci->gadget);
1953 dma_pool_destroy(ci->td_pool);
1954 dma_pool_destroy(ci->qh_pool);
1957 static int udc_id_switch_for_device(struct ci_hdrc *ci)
1960 /* Clear and enable BSV irq */
1961 hw_write_otgsc(ci, OTGSC_BSVIS | OTGSC_BSVIE,
1962 OTGSC_BSVIS | OTGSC_BSVIE);
1967 static void udc_id_switch_for_host(struct ci_hdrc *ci)
1970 * host doesn't care B_SESSION_VALID event
1971 * so clear and disbale BSV irq
1974 hw_write_otgsc(ci, OTGSC_BSVIE | OTGSC_BSVIS, OTGSC_BSVIS);
1978 * ci_hdrc_gadget_init - initialize device related bits
1979 * ci: the controller
1981 * This function initializes the gadget, if the device is "device capable".
1983 int ci_hdrc_gadget_init(struct ci_hdrc *ci)
1985 struct ci_role_driver *rdrv;
1987 if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DC))
1990 rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL);
1994 rdrv->start = udc_id_switch_for_device;
1995 rdrv->stop = udc_id_switch_for_host;
1996 rdrv->irq = udc_irq;
1997 rdrv->name = "gadget";
1998 ci->roles[CI_ROLE_GADGET] = rdrv;
2000 return udc_start(ci);