Merge git://git.infradead.org/battery-2.6
[platform/adaptation/renesas_rcar/renesas_kernel.git] / drivers / tty / n_hdlc.c
1 /* generic HDLC line discipline for Linux
2  *
3  * Written by Paul Fulghum paulkf@microgate.com
4  * for Microgate Corporation
5  *
6  * Microgate and SyncLink are registered trademarks of Microgate Corporation
7  *
8  * Adapted from ppp.c, written by Michael Callahan <callahan@maths.ox.ac.uk>,
9  *      Al Longyear <longyear@netcom.com>,
10  *      Paul Mackerras <Paul.Mackerras@cs.anu.edu.au>
11  *
12  * Original release 01/11/99
13  *
14  * This code is released under the GNU General Public License (GPL)
15  *
16  * This module implements the tty line discipline N_HDLC for use with
17  * tty device drivers that support bit-synchronous HDLC communications.
18  *
19  * All HDLC data is frame oriented which means:
20  *
21  * 1. tty write calls represent one complete transmit frame of data
22  *    The device driver should accept the complete frame or none of 
23  *    the frame (busy) in the write method. Each write call should have
24  *    a byte count in the range of 2-65535 bytes (2 is min HDLC frame
25  *    with 1 addr byte and 1 ctrl byte). The max byte count of 65535
26  *    should include any crc bytes required. For example, when using
27  *    CCITT CRC32, 4 crc bytes are required, so the maximum size frame
28  *    the application may transmit is limited to 65531 bytes. For CCITT
29  *    CRC16, the maximum application frame size would be 65533.
30  *
31  *
32  * 2. receive callbacks from the device driver represents
33  *    one received frame. The device driver should bypass
34  *    the tty flip buffer and call the line discipline receive
35  *    callback directly to avoid fragmenting or concatenating
36  *    multiple frames into a single receive callback.
37  *
38  *    The HDLC line discipline queues the receive frames in separate
39  *    buffers so complete receive frames can be returned by the
40  *    tty read calls.
41  *
42  * 3. tty read calls returns an entire frame of data or nothing.
43  *    
44  * 4. all send and receive data is considered raw. No processing
45  *    or translation is performed by the line discipline, regardless
46  *    of the tty flags
47  *
48  * 5. When line discipline is queried for the amount of receive
49  *    data available (FIOC), 0 is returned if no data available,
50  *    otherwise the count of the next available frame is returned.
51  *    (instead of the sum of all received frame counts).
52  *
53  * These conventions allow the standard tty programming interface
54  * to be used for synchronous HDLC applications when used with
55  * this line discipline (or another line discipline that is frame
56  * oriented such as N_PPP).
57  *
58  * The SyncLink driver (synclink.c) implements both asynchronous
59  * (using standard line discipline N_TTY) and synchronous HDLC
60  * (using N_HDLC) communications, with the latter using the above
61  * conventions.
62  *
63  * This implementation is very basic and does not maintain
64  * any statistics. The main point is to enforce the raw data
65  * and frame orientation of HDLC communications.
66  *
67  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
68  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
69  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
70  * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
71  * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
72  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
73  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
74  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
75  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
76  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
77  * OF THE POSSIBILITY OF SUCH DAMAGE.
78  */
79
80 #define HDLC_MAGIC 0x239e
81
82 #include <linux/module.h>
83 #include <linux/init.h>
84 #include <linux/kernel.h>
85 #include <linux/sched.h>
86 #include <linux/types.h>
87 #include <linux/fcntl.h>
88 #include <linux/interrupt.h>
89 #include <linux/ptrace.h>
90
91 #undef VERSION
92 #define VERSION(major,minor,patch) (((((major)<<8)+(minor))<<8)+(patch))
93
94 #include <linux/poll.h>
95 #include <linux/in.h>
96 #include <linux/ioctl.h>
97 #include <linux/slab.h>
98 #include <linux/tty.h>
99 #include <linux/errno.h>
100 #include <linux/string.h>       /* used in new tty drivers */
101 #include <linux/signal.h>       /* used in new tty drivers */
102 #include <linux/if.h>
103 #include <linux/bitops.h>
104
105 #include <asm/system.h>
106 #include <asm/termios.h>
107 #include <asm/uaccess.h>
108
109 /*
110  * Buffers for individual HDLC frames
111  */
112 #define MAX_HDLC_FRAME_SIZE 65535 
113 #define DEFAULT_RX_BUF_COUNT 10
114 #define MAX_RX_BUF_COUNT 60
115 #define DEFAULT_TX_BUF_COUNT 3
116
117 struct n_hdlc_buf {
118         struct n_hdlc_buf *link;
119         int               count;
120         char              buf[1];
121 };
122
123 #define N_HDLC_BUF_SIZE (sizeof(struct n_hdlc_buf) + maxframe)
124
125 struct n_hdlc_buf_list {
126         struct n_hdlc_buf *head;
127         struct n_hdlc_buf *tail;
128         int               count;
129         spinlock_t        spinlock;
130 };
131
132 /**
133  * struct n_hdlc - per device instance data structure
134  * @magic - magic value for structure
135  * @flags - miscellaneous control flags
136  * @tty - ptr to TTY structure
137  * @backup_tty - TTY to use if tty gets closed
138  * @tbusy - reentrancy flag for tx wakeup code
139  * @woke_up - FIXME: describe this field
140  * @tbuf - currently transmitting tx buffer
141  * @tx_buf_list - list of pending transmit frame buffers
142  * @rx_buf_list - list of received frame buffers
143  * @tx_free_buf_list - list unused transmit frame buffers
144  * @rx_free_buf_list - list unused received frame buffers
145  */
146 struct n_hdlc {
147         int                     magic;
148         __u32                   flags;
149         struct tty_struct       *tty;
150         struct tty_struct       *backup_tty;
151         int                     tbusy;
152         int                     woke_up;
153         struct n_hdlc_buf       *tbuf;
154         struct n_hdlc_buf_list  tx_buf_list;
155         struct n_hdlc_buf_list  rx_buf_list;
156         struct n_hdlc_buf_list  tx_free_buf_list;
157         struct n_hdlc_buf_list  rx_free_buf_list;
158 };
159
160 /*
161  * HDLC buffer list manipulation functions
162  */
163 static void n_hdlc_buf_list_init(struct n_hdlc_buf_list *list);
164 static void n_hdlc_buf_put(struct n_hdlc_buf_list *list,
165                            struct n_hdlc_buf *buf);
166 static struct n_hdlc_buf *n_hdlc_buf_get(struct n_hdlc_buf_list *list);
167
168 /* Local functions */
169
170 static struct n_hdlc *n_hdlc_alloc (void);
171
172 /* debug level can be set by insmod for debugging purposes */
173 #define DEBUG_LEVEL_INFO        1
174 static int debuglevel;
175
176 /* max frame size for memory allocations */
177 static int maxframe = 4096;
178
179 /* TTY callbacks */
180
181 static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
182                            __u8 __user *buf, size_t nr);
183 static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
184                             const unsigned char *buf, size_t nr);
185 static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
186                             unsigned int cmd, unsigned long arg);
187 static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp,
188                                     poll_table *wait);
189 static int n_hdlc_tty_open(struct tty_struct *tty);
190 static void n_hdlc_tty_close(struct tty_struct *tty);
191 static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *cp,
192                                char *fp, int count);
193 static void n_hdlc_tty_wakeup(struct tty_struct *tty);
194
195 #define bset(p,b)       ((p)[(b) >> 5] |= (1 << ((b) & 0x1f)))
196
197 #define tty2n_hdlc(tty) ((struct n_hdlc *) ((tty)->disc_data))
198 #define n_hdlc2tty(n_hdlc)      ((n_hdlc)->tty)
199
200 static void flush_rx_queue(struct tty_struct *tty)
201 {
202         struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
203         struct n_hdlc_buf *buf;
204
205         while ((buf = n_hdlc_buf_get(&n_hdlc->rx_buf_list)))
206                 n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, buf);
207 }
208
209 static void flush_tx_queue(struct tty_struct *tty)
210 {
211         struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
212         struct n_hdlc_buf *buf;
213         unsigned long flags;
214
215         while ((buf = n_hdlc_buf_get(&n_hdlc->tx_buf_list)))
216                 n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, buf);
217         spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
218         if (n_hdlc->tbuf) {
219                 n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, n_hdlc->tbuf);
220                 n_hdlc->tbuf = NULL;
221         }
222         spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
223 }
224
225 static struct tty_ldisc_ops n_hdlc_ldisc = {
226         .owner          = THIS_MODULE,
227         .magic          = TTY_LDISC_MAGIC,
228         .name           = "hdlc",
229         .open           = n_hdlc_tty_open,
230         .close          = n_hdlc_tty_close,
231         .read           = n_hdlc_tty_read,
232         .write          = n_hdlc_tty_write,
233         .ioctl          = n_hdlc_tty_ioctl,
234         .poll           = n_hdlc_tty_poll,
235         .receive_buf    = n_hdlc_tty_receive,
236         .write_wakeup   = n_hdlc_tty_wakeup,
237         .flush_buffer   = flush_rx_queue,
238 };
239
240 /**
241  * n_hdlc_release - release an n_hdlc per device line discipline info structure
242  * @n_hdlc - per device line discipline info structure
243  */
244 static void n_hdlc_release(struct n_hdlc *n_hdlc)
245 {
246         struct tty_struct *tty = n_hdlc2tty (n_hdlc);
247         struct n_hdlc_buf *buf;
248         
249         if (debuglevel >= DEBUG_LEVEL_INFO)     
250                 printk("%s(%d)n_hdlc_release() called\n",__FILE__,__LINE__);
251                 
252         /* Ensure that the n_hdlcd process is not hanging on select()/poll() */
253         wake_up_interruptible (&tty->read_wait);
254         wake_up_interruptible (&tty->write_wait);
255
256         if (tty->disc_data == n_hdlc)
257                 tty->disc_data = NULL;  /* Break the tty->n_hdlc link */
258
259         /* Release transmit and receive buffers */
260         for(;;) {
261                 buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list);
262                 if (buf) {
263                         kfree(buf);
264                 } else
265                         break;
266         }
267         for(;;) {
268                 buf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list);
269                 if (buf) {
270                         kfree(buf);
271                 } else
272                         break;
273         }
274         for(;;) {
275                 buf = n_hdlc_buf_get(&n_hdlc->rx_buf_list);
276                 if (buf) {
277                         kfree(buf);
278                 } else
279                         break;
280         }
281         for(;;) {
282                 buf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
283                 if (buf) {
284                         kfree(buf);
285                 } else
286                         break;
287         }
288         kfree(n_hdlc->tbuf);
289         kfree(n_hdlc);
290         
291 }       /* end of n_hdlc_release() */
292
293 /**
294  * n_hdlc_tty_close - line discipline close
295  * @tty - pointer to tty info structure
296  *
297  * Called when the line discipline is changed to something
298  * else, the tty is closed, or the tty detects a hangup.
299  */
300 static void n_hdlc_tty_close(struct tty_struct *tty)
301 {
302         struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
303
304         if (debuglevel >= DEBUG_LEVEL_INFO)     
305                 printk("%s(%d)n_hdlc_tty_close() called\n",__FILE__,__LINE__);
306                 
307         if (n_hdlc != NULL) {
308                 if (n_hdlc->magic != HDLC_MAGIC) {
309                         printk (KERN_WARNING"n_hdlc: trying to close unopened tty!\n");
310                         return;
311                 }
312 #if defined(TTY_NO_WRITE_SPLIT)
313                 clear_bit(TTY_NO_WRITE_SPLIT,&tty->flags);
314 #endif
315                 tty->disc_data = NULL;
316                 if (tty == n_hdlc->backup_tty)
317                         n_hdlc->backup_tty = NULL;
318                 if (tty != n_hdlc->tty)
319                         return;
320                 if (n_hdlc->backup_tty) {
321                         n_hdlc->tty = n_hdlc->backup_tty;
322                 } else {
323                         n_hdlc_release (n_hdlc);
324                 }
325         }
326         
327         if (debuglevel >= DEBUG_LEVEL_INFO)     
328                 printk("%s(%d)n_hdlc_tty_close() success\n",__FILE__,__LINE__);
329                 
330 }       /* end of n_hdlc_tty_close() */
331
332 /**
333  * n_hdlc_tty_open - called when line discipline changed to n_hdlc
334  * @tty - pointer to tty info structure
335  *
336  * Returns 0 if success, otherwise error code
337  */
338 static int n_hdlc_tty_open (struct tty_struct *tty)
339 {
340         struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
341
342         if (debuglevel >= DEBUG_LEVEL_INFO)     
343                 printk("%s(%d)n_hdlc_tty_open() called (device=%s)\n",
344                 __FILE__,__LINE__,
345                 tty->name);
346                 
347         /* There should not be an existing table for this slot. */
348         if (n_hdlc) {
349                 printk (KERN_ERR"n_hdlc_tty_open:tty already associated!\n" );
350                 return -EEXIST;
351         }
352         
353         n_hdlc = n_hdlc_alloc();
354         if (!n_hdlc) {
355                 printk (KERN_ERR "n_hdlc_alloc failed\n");
356                 return -ENFILE;
357         }
358                 
359         tty->disc_data = n_hdlc;
360         n_hdlc->tty    = tty;
361         tty->receive_room = 65536;
362         
363 #if defined(TTY_NO_WRITE_SPLIT)
364         /* change tty_io write() to not split large writes into 8K chunks */
365         set_bit(TTY_NO_WRITE_SPLIT,&tty->flags);
366 #endif
367         
368         /* flush receive data from driver */
369         tty_driver_flush_buffer(tty);
370                 
371         if (debuglevel >= DEBUG_LEVEL_INFO)     
372                 printk("%s(%d)n_hdlc_tty_open() success\n",__FILE__,__LINE__);
373                 
374         return 0;
375         
376 }       /* end of n_tty_hdlc_open() */
377
378 /**
379  * n_hdlc_send_frames - send frames on pending send buffer list
380  * @n_hdlc - pointer to ldisc instance data
381  * @tty - pointer to tty instance data
382  *
383  * Send frames on pending send buffer list until the driver does not accept a
384  * frame (busy) this function is called after adding a frame to the send buffer
385  * list and by the tty wakeup callback.
386  */
387 static void n_hdlc_send_frames(struct n_hdlc *n_hdlc, struct tty_struct *tty)
388 {
389         register int actual;
390         unsigned long flags;
391         struct n_hdlc_buf *tbuf;
392
393         if (debuglevel >= DEBUG_LEVEL_INFO)     
394                 printk("%s(%d)n_hdlc_send_frames() called\n",__FILE__,__LINE__);
395  check_again:
396                 
397         spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
398         if (n_hdlc->tbusy) {
399                 n_hdlc->woke_up = 1;
400                 spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
401                 return;
402         }
403         n_hdlc->tbusy = 1;
404         n_hdlc->woke_up = 0;
405         spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
406
407         /* get current transmit buffer or get new transmit */
408         /* buffer from list of pending transmit buffers */
409                 
410         tbuf = n_hdlc->tbuf;
411         if (!tbuf)
412                 tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
413                 
414         while (tbuf) {
415                 if (debuglevel >= DEBUG_LEVEL_INFO)     
416                         printk("%s(%d)sending frame %p, count=%d\n",
417                                 __FILE__,__LINE__,tbuf,tbuf->count);
418                         
419                 /* Send the next block of data to device */
420                 set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
421                 actual = tty->ops->write(tty, tbuf->buf, tbuf->count);
422
423                 /* rollback was possible and has been done */
424                 if (actual == -ERESTARTSYS) {
425                         n_hdlc->tbuf = tbuf;
426                         break;
427                 }
428                 /* if transmit error, throw frame away by */
429                 /* pretending it was accepted by driver */
430                 if (actual < 0)
431                         actual = tbuf->count;
432                 
433                 if (actual == tbuf->count) {
434                         if (debuglevel >= DEBUG_LEVEL_INFO)     
435                                 printk("%s(%d)frame %p completed\n",
436                                         __FILE__,__LINE__,tbuf);
437                                         
438                         /* free current transmit buffer */
439                         n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, tbuf);
440                         
441                         /* this tx buffer is done */
442                         n_hdlc->tbuf = NULL;
443                         
444                         /* wait up sleeping writers */
445                         wake_up_interruptible(&tty->write_wait);
446         
447                         /* get next pending transmit buffer */
448                         tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
449                 } else {
450                         if (debuglevel >= DEBUG_LEVEL_INFO)     
451                                 printk("%s(%d)frame %p pending\n",
452                                         __FILE__,__LINE__,tbuf);
453                                         
454                         /* buffer not accepted by driver */
455                         /* set this buffer as pending buffer */
456                         n_hdlc->tbuf = tbuf;
457                         break;
458                 }
459         }
460         
461         if (!tbuf)
462                 clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
463         
464         /* Clear the re-entry flag */
465         spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
466         n_hdlc->tbusy = 0;
467         spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags); 
468         
469         if (n_hdlc->woke_up)
470           goto check_again;
471
472         if (debuglevel >= DEBUG_LEVEL_INFO)     
473                 printk("%s(%d)n_hdlc_send_frames() exit\n",__FILE__,__LINE__);
474                 
475 }       /* end of n_hdlc_send_frames() */
476
477 /**
478  * n_hdlc_tty_wakeup - Callback for transmit wakeup
479  * @tty - pointer to associated tty instance data
480  *
481  * Called when low level device driver can accept more send data.
482  */
483 static void n_hdlc_tty_wakeup(struct tty_struct *tty)
484 {
485         struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
486
487         if (debuglevel >= DEBUG_LEVEL_INFO)     
488                 printk("%s(%d)n_hdlc_tty_wakeup() called\n",__FILE__,__LINE__);
489                 
490         if (!n_hdlc)
491                 return;
492
493         if (tty != n_hdlc->tty) {
494                 clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
495                 return;
496         }
497
498         n_hdlc_send_frames (n_hdlc, tty);
499                 
500 }       /* end of n_hdlc_tty_wakeup() */
501
502 /**
503  * n_hdlc_tty_receive - Called by tty driver when receive data is available
504  * @tty - pointer to tty instance data
505  * @data - pointer to received data
506  * @flags - pointer to flags for data
507  * @count - count of received data in bytes
508  *
509  * Called by tty low level driver when receive data is available. Data is
510  * interpreted as one HDLC frame.
511  */
512 static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *data,
513                                char *flags, int count)
514 {
515         register struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
516         register struct n_hdlc_buf *buf;
517
518         if (debuglevel >= DEBUG_LEVEL_INFO)     
519                 printk("%s(%d)n_hdlc_tty_receive() called count=%d\n",
520                         __FILE__,__LINE__, count);
521                 
522         /* This can happen if stuff comes in on the backup tty */
523         if (!n_hdlc || tty != n_hdlc->tty)
524                 return;
525                 
526         /* verify line is using HDLC discipline */
527         if (n_hdlc->magic != HDLC_MAGIC) {
528                 printk("%s(%d) line not using HDLC discipline\n",
529                         __FILE__,__LINE__);
530                 return;
531         }
532         
533         if ( count>maxframe ) {
534                 if (debuglevel >= DEBUG_LEVEL_INFO)     
535                         printk("%s(%d) rx count>maxframesize, data discarded\n",
536                                __FILE__,__LINE__);
537                 return;
538         }
539
540         /* get a free HDLC buffer */    
541         buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list);
542         if (!buf) {
543                 /* no buffers in free list, attempt to allocate another rx buffer */
544                 /* unless the maximum count has been reached */
545                 if (n_hdlc->rx_buf_list.count < MAX_RX_BUF_COUNT)
546                         buf = kmalloc(N_HDLC_BUF_SIZE, GFP_ATOMIC);
547         }
548         
549         if (!buf) {
550                 if (debuglevel >= DEBUG_LEVEL_INFO)     
551                         printk("%s(%d) no more rx buffers, data discarded\n",
552                                __FILE__,__LINE__);
553                 return;
554         }
555                 
556         /* copy received data to HDLC buffer */
557         memcpy(buf->buf,data,count);
558         buf->count=count;
559
560         /* add HDLC buffer to list of received frames */
561         n_hdlc_buf_put(&n_hdlc->rx_buf_list, buf);
562         
563         /* wake up any blocked reads and perform async signalling */
564         wake_up_interruptible (&tty->read_wait);
565         if (n_hdlc->tty->fasync != NULL)
566                 kill_fasync (&n_hdlc->tty->fasync, SIGIO, POLL_IN);
567
568 }       /* end of n_hdlc_tty_receive() */
569
570 /**
571  * n_hdlc_tty_read - Called to retrieve one frame of data (if available)
572  * @tty - pointer to tty instance data
573  * @file - pointer to open file object
574  * @buf - pointer to returned data buffer
575  * @nr - size of returned data buffer
576  *      
577  * Returns the number of bytes returned or error code.
578  */
579 static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
580                            __u8 __user *buf, size_t nr)
581 {
582         struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
583         int ret = 0;
584         struct n_hdlc_buf *rbuf;
585         DECLARE_WAITQUEUE(wait, current);
586
587         if (debuglevel >= DEBUG_LEVEL_INFO)     
588                 printk("%s(%d)n_hdlc_tty_read() called\n",__FILE__,__LINE__);
589                 
590         /* Validate the pointers */
591         if (!n_hdlc)
592                 return -EIO;
593
594         /* verify user access to buffer */
595         if (!access_ok(VERIFY_WRITE, buf, nr)) {
596                 printk(KERN_WARNING "%s(%d) n_hdlc_tty_read() can't verify user "
597                 "buffer\n", __FILE__, __LINE__);
598                 return -EFAULT;
599         }
600
601         add_wait_queue(&tty->read_wait, &wait);
602
603         for (;;) {
604                 if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) {
605                         ret = -EIO;
606                         break;
607                 }
608                 if (tty_hung_up_p(file))
609                         break;
610
611                 set_current_state(TASK_INTERRUPTIBLE);
612
613                 rbuf = n_hdlc_buf_get(&n_hdlc->rx_buf_list);
614                 if (rbuf) {
615                         if (rbuf->count > nr) {
616                                 /* too large for caller's buffer */
617                                 ret = -EOVERFLOW;
618                         } else {
619                                 if (copy_to_user(buf, rbuf->buf, rbuf->count))
620                                         ret = -EFAULT;
621                                 else
622                                         ret = rbuf->count;
623                         }
624
625                         if (n_hdlc->rx_free_buf_list.count >
626                             DEFAULT_RX_BUF_COUNT)
627                                 kfree(rbuf);
628                         else
629                                 n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, rbuf);
630                         break;
631                 }
632                         
633                 /* no data */
634                 if (file->f_flags & O_NONBLOCK) {
635                         ret = -EAGAIN;
636                         break;
637                 }
638
639                 schedule();
640
641                 if (signal_pending(current)) {
642                         ret = -EINTR;
643                         break;
644                 }
645         }
646
647         remove_wait_queue(&tty->read_wait, &wait);
648         __set_current_state(TASK_RUNNING);
649
650         return ret;
651         
652 }       /* end of n_hdlc_tty_read() */
653
654 /**
655  * n_hdlc_tty_write - write a single frame of data to device
656  * @tty - pointer to associated tty device instance data
657  * @file - pointer to file object data
658  * @data - pointer to transmit data (one frame)
659  * @count - size of transmit frame in bytes
660  *              
661  * Returns the number of bytes written (or error code).
662  */
663 static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
664                             const unsigned char *data, size_t count)
665 {
666         struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
667         int error = 0;
668         DECLARE_WAITQUEUE(wait, current);
669         struct n_hdlc_buf *tbuf;
670
671         if (debuglevel >= DEBUG_LEVEL_INFO)     
672                 printk("%s(%d)n_hdlc_tty_write() called count=%Zd\n",
673                         __FILE__,__LINE__,count);
674                 
675         /* Verify pointers */
676         if (!n_hdlc)
677                 return -EIO;
678
679         if (n_hdlc->magic != HDLC_MAGIC)
680                 return -EIO;
681
682         /* verify frame size */
683         if (count > maxframe ) {
684                 if (debuglevel & DEBUG_LEVEL_INFO)
685                         printk (KERN_WARNING
686                                 "n_hdlc_tty_write: truncating user packet "
687                                 "from %lu to %d\n", (unsigned long) count,
688                                 maxframe );
689                 count = maxframe;
690         }
691         
692         add_wait_queue(&tty->write_wait, &wait);
693
694         for (;;) {
695                 set_current_state(TASK_INTERRUPTIBLE);
696         
697                 tbuf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list);
698                 if (tbuf)
699                         break;
700
701                 if (file->f_flags & O_NONBLOCK) {
702                         error = -EAGAIN;
703                         break;
704                 }
705                 schedule();
706                         
707                 n_hdlc = tty2n_hdlc (tty);
708                 if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC || 
709                     tty != n_hdlc->tty) {
710                         printk("n_hdlc_tty_write: %p invalid after wait!\n", n_hdlc);
711                         error = -EIO;
712                         break;
713                 }
714                         
715                 if (signal_pending(current)) {
716                         error = -EINTR;
717                         break;
718                 }
719         }
720
721         __set_current_state(TASK_RUNNING);
722         remove_wait_queue(&tty->write_wait, &wait);
723
724         if (!error) {           
725                 /* Retrieve the user's buffer */
726                 memcpy(tbuf->buf, data, count);
727
728                 /* Send the data */
729                 tbuf->count = error = count;
730                 n_hdlc_buf_put(&n_hdlc->tx_buf_list,tbuf);
731                 n_hdlc_send_frames(n_hdlc,tty);
732         }
733
734         return error;
735         
736 }       /* end of n_hdlc_tty_write() */
737
738 /**
739  * n_hdlc_tty_ioctl - process IOCTL system call for the tty device.
740  * @tty - pointer to tty instance data
741  * @file - pointer to open file object for device
742  * @cmd - IOCTL command code
743  * @arg - argument for IOCTL call (cmd dependent)
744  *
745  * Returns command dependent result.
746  */
747 static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
748                             unsigned int cmd, unsigned long arg)
749 {
750         struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
751         int error = 0;
752         int count;
753         unsigned long flags;
754         
755         if (debuglevel >= DEBUG_LEVEL_INFO)     
756                 printk("%s(%d)n_hdlc_tty_ioctl() called %d\n",
757                         __FILE__,__LINE__,cmd);
758                 
759         /* Verify the status of the device */
760         if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC)
761                 return -EBADF;
762
763         switch (cmd) {
764         case FIONREAD:
765                 /* report count of read data available */
766                 /* in next available frame (if any) */
767                 spin_lock_irqsave(&n_hdlc->rx_buf_list.spinlock,flags);
768                 if (n_hdlc->rx_buf_list.head)
769                         count = n_hdlc->rx_buf_list.head->count;
770                 else
771                         count = 0;
772                 spin_unlock_irqrestore(&n_hdlc->rx_buf_list.spinlock,flags);
773                 error = put_user(count, (int __user *)arg);
774                 break;
775
776         case TIOCOUTQ:
777                 /* get the pending tx byte count in the driver */
778                 count = tty_chars_in_buffer(tty);
779                 /* add size of next output frame in queue */
780                 spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock,flags);
781                 if (n_hdlc->tx_buf_list.head)
782                         count += n_hdlc->tx_buf_list.head->count;
783                 spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock,flags);
784                 error = put_user(count, (int __user *)arg);
785                 break;
786
787         case TCFLSH:
788                 switch (arg) {
789                 case TCIOFLUSH:
790                 case TCOFLUSH:
791                         flush_tx_queue(tty);
792                 }
793                 /* fall through to default */
794
795         default:
796                 error = n_tty_ioctl_helper(tty, file, cmd, arg);
797                 break;
798         }
799         return error;
800         
801 }       /* end of n_hdlc_tty_ioctl() */
802
803 /**
804  * n_hdlc_tty_poll - TTY callback for poll system call
805  * @tty - pointer to tty instance data
806  * @filp - pointer to open file object for device
807  * @poll_table - wait queue for operations
808  * 
809  * Determine which operations (read/write) will not block and return info
810  * to caller.
811  * Returns a bit mask containing info on which ops will not block.
812  */
813 static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp,
814                                     poll_table *wait)
815 {
816         struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
817         unsigned int mask = 0;
818
819         if (debuglevel >= DEBUG_LEVEL_INFO)     
820                 printk("%s(%d)n_hdlc_tty_poll() called\n",__FILE__,__LINE__);
821                 
822         if (n_hdlc && n_hdlc->magic == HDLC_MAGIC && tty == n_hdlc->tty) {
823                 /* queue current process into any wait queue that */
824                 /* may awaken in the future (read and write) */
825
826                 poll_wait(filp, &tty->read_wait, wait);
827                 poll_wait(filp, &tty->write_wait, wait);
828
829                 /* set bits for operations that won't block */
830                 if (n_hdlc->rx_buf_list.head)
831                         mask |= POLLIN | POLLRDNORM;    /* readable */
832                 if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
833                         mask |= POLLHUP;
834                 if (tty_hung_up_p(filp))
835                         mask |= POLLHUP;
836                 if (!tty_is_writelocked(tty) &&
837                                 n_hdlc->tx_free_buf_list.head)
838                         mask |= POLLOUT | POLLWRNORM;   /* writable */
839         }
840         return mask;
841 }       /* end of n_hdlc_tty_poll() */
842
843 /**
844  * n_hdlc_alloc - allocate an n_hdlc instance data structure
845  *
846  * Returns a pointer to newly created structure if success, otherwise %NULL
847  */
848 static struct n_hdlc *n_hdlc_alloc(void)
849 {
850         struct n_hdlc_buf *buf;
851         int i;
852         struct n_hdlc *n_hdlc = kmalloc(sizeof(*n_hdlc), GFP_KERNEL);
853
854         if (!n_hdlc)
855                 return NULL;
856
857         memset(n_hdlc, 0, sizeof(*n_hdlc));
858
859         n_hdlc_buf_list_init(&n_hdlc->rx_free_buf_list);
860         n_hdlc_buf_list_init(&n_hdlc->tx_free_buf_list);
861         n_hdlc_buf_list_init(&n_hdlc->rx_buf_list);
862         n_hdlc_buf_list_init(&n_hdlc->tx_buf_list);
863         
864         /* allocate free rx buffer list */
865         for(i=0;i<DEFAULT_RX_BUF_COUNT;i++) {
866                 buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL);
867                 if (buf)
868                         n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,buf);
869                 else if (debuglevel >= DEBUG_LEVEL_INFO)        
870                         printk("%s(%d)n_hdlc_alloc(), kalloc() failed for rx buffer %d\n",__FILE__,__LINE__, i);
871         }
872         
873         /* allocate free tx buffer list */
874         for(i=0;i<DEFAULT_TX_BUF_COUNT;i++) {
875                 buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL);
876                 if (buf)
877                         n_hdlc_buf_put(&n_hdlc->tx_free_buf_list,buf);
878                 else if (debuglevel >= DEBUG_LEVEL_INFO)        
879                         printk("%s(%d)n_hdlc_alloc(), kalloc() failed for tx buffer %d\n",__FILE__,__LINE__, i);
880         }
881         
882         /* Initialize the control block */
883         n_hdlc->magic  = HDLC_MAGIC;
884         n_hdlc->flags  = 0;
885         
886         return n_hdlc;
887         
888 }       /* end of n_hdlc_alloc() */
889
890 /**
891  * n_hdlc_buf_list_init - initialize specified HDLC buffer list
892  * @list - pointer to buffer list
893  */
894 static void n_hdlc_buf_list_init(struct n_hdlc_buf_list *list)
895 {
896         memset(list, 0, sizeof(*list));
897         spin_lock_init(&list->spinlock);
898 }       /* end of n_hdlc_buf_list_init() */
899
900 /**
901  * n_hdlc_buf_put - add specified HDLC buffer to tail of specified list
902  * @list - pointer to buffer list
903  * @buf - pointer to buffer
904  */
905 static void n_hdlc_buf_put(struct n_hdlc_buf_list *list,
906                            struct n_hdlc_buf *buf)
907 {
908         unsigned long flags;
909         spin_lock_irqsave(&list->spinlock,flags);
910         
911         buf->link=NULL;
912         if (list->tail)
913                 list->tail->link = buf;
914         else
915                 list->head = buf;
916         list->tail = buf;
917         (list->count)++;
918         
919         spin_unlock_irqrestore(&list->spinlock,flags);
920         
921 }       /* end of n_hdlc_buf_put() */
922
923 /**
924  * n_hdlc_buf_get - remove and return an HDLC buffer from list
925  * @list - pointer to HDLC buffer list
926  * 
927  * Remove and return an HDLC buffer from the head of the specified HDLC buffer
928  * list.
929  * Returns a pointer to HDLC buffer if available, otherwise %NULL.
930  */
931 static struct n_hdlc_buf* n_hdlc_buf_get(struct n_hdlc_buf_list *list)
932 {
933         unsigned long flags;
934         struct n_hdlc_buf *buf;
935         spin_lock_irqsave(&list->spinlock,flags);
936         
937         buf = list->head;
938         if (buf) {
939                 list->head = buf->link;
940                 (list->count)--;
941         }
942         if (!list->head)
943                 list->tail = NULL;
944         
945         spin_unlock_irqrestore(&list->spinlock,flags);
946         return buf;
947         
948 }       /* end of n_hdlc_buf_get() */
949
950 static char hdlc_banner[] __initdata =
951         KERN_INFO "HDLC line discipline maxframe=%u\n";
952 static char hdlc_register_ok[] __initdata =
953         KERN_INFO "N_HDLC line discipline registered.\n";
954 static char hdlc_register_fail[] __initdata =
955         KERN_ERR "error registering line discipline: %d\n";
956 static char hdlc_init_fail[] __initdata =
957         KERN_INFO "N_HDLC: init failure %d\n";
958
959 static int __init n_hdlc_init(void)
960 {
961         int status;
962
963         /* range check maxframe arg */
964         if (maxframe < 4096)
965                 maxframe = 4096;
966         else if (maxframe > 65535)
967                 maxframe = 65535;
968
969         printk(hdlc_banner, maxframe);
970
971         status = tty_register_ldisc(N_HDLC, &n_hdlc_ldisc);
972         if (!status)
973                 printk(hdlc_register_ok);
974         else
975                 printk(hdlc_register_fail, status);
976
977         if (status)
978                 printk(hdlc_init_fail, status);
979         return status;
980         
981 }       /* end of init_module() */
982
983 static char hdlc_unregister_ok[] __exitdata =
984         KERN_INFO "N_HDLC: line discipline unregistered\n";
985 static char hdlc_unregister_fail[] __exitdata =
986         KERN_ERR "N_HDLC: can't unregister line discipline (err = %d)\n";
987
988 static void __exit n_hdlc_exit(void)
989 {
990         /* Release tty registration of line discipline */
991         int status = tty_unregister_ldisc(N_HDLC);
992
993         if (status)
994                 printk(hdlc_unregister_fail, status);
995         else
996                 printk(hdlc_unregister_ok);
997 }
998
999 module_init(n_hdlc_init);
1000 module_exit(n_hdlc_exit);
1001
1002 MODULE_LICENSE("GPL");
1003 MODULE_AUTHOR("Paul Fulghum paulkf@microgate.com");
1004 module_param(debuglevel, int, 0);
1005 module_param(maxframe, int, 0);
1006 MODULE_ALIAS_LDISC(N_HDLC);