cxl/mem: Fix shutdown order
[platform/kernel/linux-rpi.git] / drivers / thermal / loongson2_thermal.c
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Author: zhanghongchen <zhanghongchen@loongson.cn>
4  *         Yinbo Zhu <zhuyinbo@loongson.cn>
5  * Copyright (C) 2022-2023 Loongson Technology Corporation Limited
6  */
7
8 #include <linux/interrupt.h>
9 #include <linux/io.h>
10 #include <linux/minmax.h>
11 #include <linux/module.h>
12 #include <linux/of_device.h>
13 #include <linux/platform_device.h>
14 #include <linux/thermal.h>
15 #include <linux/units.h>
16 #include "thermal_hwmon.h"
17
18 #define LOONGSON2_MAX_SENSOR_SEL_NUM                    3
19
20 #define LOONGSON2_THSENS_CTRL_HI_REG                    0x0
21 #define LOONGSON2_THSENS_CTRL_LOW_REG                   0x8
22 #define LOONGSON2_THSENS_STATUS_REG                     0x10
23 #define LOONGSON2_THSENS_OUT_REG                        0x14
24
25 #define LOONGSON2_THSENS_INT_LO                         BIT(0)
26 #define LOONGSON2_THSENS_INT_HIGH                       BIT(1)
27 #define LOONGSON2_THSENS_OUT_MASK                       0xFF
28
29 struct loongson2_thermal_chip_data {
30         unsigned int    thermal_sensor_sel;
31 };
32
33 struct loongson2_thermal_data {
34         void __iomem    *regs;
35         const struct loongson2_thermal_chip_data *chip_data;
36 };
37
38 static int loongson2_thermal_set(struct loongson2_thermal_data *data,
39                                         int low, int high, bool enable)
40 {
41         u64 reg_ctrl = 0;
42         int reg_off = data->chip_data->thermal_sensor_sel * 2;
43
44         low = clamp(-40, low, high);
45         high = clamp(125, low, high);
46
47         low += HECTO;
48         high += HECTO;
49
50         reg_ctrl = low;
51         reg_ctrl |= enable ? 0x100 : 0;
52         writew(reg_ctrl, data->regs + LOONGSON2_THSENS_CTRL_LOW_REG + reg_off);
53
54         reg_ctrl = high;
55         reg_ctrl |= enable ? 0x100 : 0;
56         writew(reg_ctrl, data->regs + LOONGSON2_THSENS_CTRL_HI_REG + reg_off);
57
58         return 0;
59 }
60
61 static int loongson2_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
62 {
63         u32 reg_val;
64         struct loongson2_thermal_data *data = thermal_zone_device_priv(tz);
65
66         reg_val = readl(data->regs + LOONGSON2_THSENS_OUT_REG);
67         *temp = ((reg_val & LOONGSON2_THSENS_OUT_MASK) - HECTO) * KILO;
68
69         return 0;
70 }
71
72 static irqreturn_t loongson2_thermal_irq_thread(int irq, void *dev)
73 {
74         struct thermal_zone_device *tzd = dev;
75         struct loongson2_thermal_data *data = thermal_zone_device_priv(tzd);
76
77         writeb(LOONGSON2_THSENS_INT_LO | LOONGSON2_THSENS_INT_HIGH, data->regs +
78                 LOONGSON2_THSENS_STATUS_REG);
79
80         thermal_zone_device_update(tzd, THERMAL_EVENT_UNSPECIFIED);
81
82         return IRQ_HANDLED;
83 }
84
85 static int loongson2_thermal_set_trips(struct thermal_zone_device *tz, int low, int high)
86 {
87         struct loongson2_thermal_data *data = thermal_zone_device_priv(tz);
88
89         return loongson2_thermal_set(data, low/MILLI, high/MILLI, true);
90 }
91
92 static const struct thermal_zone_device_ops loongson2_of_thermal_ops = {
93         .get_temp = loongson2_thermal_get_temp,
94         .set_trips = loongson2_thermal_set_trips,
95 };
96
97 static int loongson2_thermal_probe(struct platform_device *pdev)
98 {
99         struct device *dev = &pdev->dev;
100         struct loongson2_thermal_data *data;
101         struct thermal_zone_device *tzd;
102         int ret, irq, i;
103
104         data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
105         if (!data)
106                 return -ENOMEM;
107
108         data->chip_data = device_get_match_data(dev);
109
110         data->regs = devm_platform_ioremap_resource(pdev, 0);
111         if (IS_ERR(data->regs))
112                 return PTR_ERR(data->regs);
113
114         irq = platform_get_irq(pdev, 0);
115         if (irq < 0)
116                 return irq;
117
118         writeb(LOONGSON2_THSENS_INT_LO | LOONGSON2_THSENS_INT_HIGH, data->regs +
119                 LOONGSON2_THSENS_STATUS_REG);
120
121         loongson2_thermal_set(data, 0, 0, false);
122
123         for (i = 0; i <= LOONGSON2_MAX_SENSOR_SEL_NUM; i++) {
124                 tzd = devm_thermal_of_zone_register(dev, i, data,
125                         &loongson2_of_thermal_ops);
126
127                 if (!IS_ERR(tzd))
128                         break;
129
130                 if (PTR_ERR(tzd) != ENODEV)
131                         continue;
132
133                 return dev_err_probe(dev, PTR_ERR(tzd), "failed to register");
134         }
135
136         ret = devm_request_threaded_irq(dev, irq, NULL, loongson2_thermal_irq_thread,
137                         IRQF_ONESHOT, "loongson2_thermal", tzd);
138         if (ret < 0)
139                 return dev_err_probe(dev, ret, "failed to request alarm irq\n");
140
141         devm_thermal_add_hwmon_sysfs(dev, tzd);
142
143         return 0;
144 }
145
146 static const struct loongson2_thermal_chip_data loongson2_thermal_ls2k1000_data = {
147         .thermal_sensor_sel = 0,
148 };
149
150 static const struct of_device_id of_loongson2_thermal_match[] = {
151         {
152                 .compatible = "loongson,ls2k1000-thermal",
153                 .data = &loongson2_thermal_ls2k1000_data,
154         },
155         { /* end */ }
156 };
157 MODULE_DEVICE_TABLE(of, of_loongson2_thermal_match);
158
159 static struct platform_driver loongson2_thermal_driver = {
160         .driver = {
161                 .name           = "loongson2_thermal",
162                 .of_match_table = of_loongson2_thermal_match,
163         },
164         .probe  = loongson2_thermal_probe,
165 };
166 module_platform_driver(loongson2_thermal_driver);
167
168 MODULE_DESCRIPTION("Loongson2 thermal driver");
169 MODULE_LICENSE("GPL");