1 // SPDX-License-Identifier: GPL-2.0-only
3 * Dove thermal sensor driver
5 * Copyright (C) 2013 Andrew Lunn <andrew@lunn.ch>
7 #include <linux/device.h>
10 #include <linux/kernel.h>
12 #include <linux/module.h>
13 #include <linux/platform_device.h>
14 #include <linux/thermal.h>
16 #define DOVE_THERMAL_TEMP_OFFSET 1
17 #define DOVE_THERMAL_TEMP_MASK 0x1FF
19 /* Dove Thermal Manager Control and Status Register */
20 #define PMU_TM_DISABLE_OFFS 0
21 #define PMU_TM_DISABLE_MASK (0x1 << PMU_TM_DISABLE_OFFS)
23 /* Dove Theraml Diode Control 0 Register */
24 #define PMU_TDC0_SW_RST_MASK (0x1 << 1)
25 #define PMU_TDC0_SEL_VCAL_OFFS 5
26 #define PMU_TDC0_SEL_VCAL_MASK (0x3 << PMU_TDC0_SEL_VCAL_OFFS)
27 #define PMU_TDC0_REF_CAL_CNT_OFFS 11
28 #define PMU_TDC0_REF_CAL_CNT_MASK (0x1FF << PMU_TDC0_REF_CAL_CNT_OFFS)
29 #define PMU_TDC0_AVG_NUM_OFFS 25
30 #define PMU_TDC0_AVG_NUM_MASK (0x7 << PMU_TDC0_AVG_NUM_OFFS)
32 /* Dove Thermal Diode Control 1 Register */
33 #define PMU_TEMP_DIOD_CTRL1_REG 0x04
34 #define PMU_TDC1_TEMP_VALID_MASK (0x1 << 10)
36 /* Dove Thermal Sensor Dev Structure */
37 struct dove_thermal_priv {
39 void __iomem *control;
42 static int dove_init_sensor(const struct dove_thermal_priv *priv)
47 /* Configure the Diode Control Register #0 */
48 reg = readl_relaxed(priv->control);
50 /* Use average of 2 */
51 reg &= ~PMU_TDC0_AVG_NUM_MASK;
52 reg |= (0x1 << PMU_TDC0_AVG_NUM_OFFS);
54 /* Reference calibration value */
55 reg &= ~PMU_TDC0_REF_CAL_CNT_MASK;
56 reg |= (0x0F1 << PMU_TDC0_REF_CAL_CNT_OFFS);
58 /* Set the high level reference for calibration */
59 reg &= ~PMU_TDC0_SEL_VCAL_MASK;
60 reg |= (0x2 << PMU_TDC0_SEL_VCAL_OFFS);
61 writel(reg, priv->control);
63 /* Reset the sensor */
64 reg = readl_relaxed(priv->control);
65 writel((reg | PMU_TDC0_SW_RST_MASK), priv->control);
66 writel(reg, priv->control);
68 /* Enable the sensor */
69 reg = readl_relaxed(priv->sensor);
70 reg &= ~PMU_TM_DISABLE_MASK;
71 writel(reg, priv->sensor);
73 /* Poll the sensor for the first reading */
74 for (i = 0; i < 1000000; i++) {
75 reg = readl_relaxed(priv->sensor);
76 if (reg & DOVE_THERMAL_TEMP_MASK)
86 static int dove_get_temp(struct thermal_zone_device *thermal,
90 struct dove_thermal_priv *priv = thermal_zone_device_priv(thermal);
93 reg = readl_relaxed(priv->control + PMU_TEMP_DIOD_CTRL1_REG);
94 if ((reg & PMU_TDC1_TEMP_VALID_MASK) == 0x0)
98 * Calculate temperature. According to Marvell internal
99 * documentation the formula for this is:
100 * Celsius = (322-reg)/1.3625
102 reg = readl_relaxed(priv->sensor);
103 reg = (reg >> DOVE_THERMAL_TEMP_OFFSET) & DOVE_THERMAL_TEMP_MASK;
104 *temp = ((3220000000UL - (10000000UL * reg)) / 13625);
109 static struct thermal_zone_device_ops ops = {
110 .get_temp = dove_get_temp,
113 static const struct of_device_id dove_thermal_id_table[] = {
114 { .compatible = "marvell,dove-thermal" },
118 static int dove_thermal_probe(struct platform_device *pdev)
120 struct thermal_zone_device *thermal = NULL;
121 struct dove_thermal_priv *priv;
124 priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
128 priv->sensor = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
129 if (IS_ERR(priv->sensor))
130 return PTR_ERR(priv->sensor);
132 priv->control = devm_platform_get_and_ioremap_resource(pdev, 1, NULL);
133 if (IS_ERR(priv->control))
134 return PTR_ERR(priv->control);
136 ret = dove_init_sensor(priv);
138 dev_err(&pdev->dev, "Failed to initialize sensor\n");
142 thermal = thermal_zone_device_register("dove_thermal", 0, 0,
143 priv, &ops, NULL, 0, 0);
144 if (IS_ERR(thermal)) {
146 "Failed to register thermal zone device\n");
147 return PTR_ERR(thermal);
150 ret = thermal_zone_device_enable(thermal);
152 thermal_zone_device_unregister(thermal);
156 platform_set_drvdata(pdev, thermal);
161 static int dove_thermal_exit(struct platform_device *pdev)
163 struct thermal_zone_device *dove_thermal =
164 platform_get_drvdata(pdev);
166 thermal_zone_device_unregister(dove_thermal);
171 MODULE_DEVICE_TABLE(of, dove_thermal_id_table);
173 static struct platform_driver dove_thermal_driver = {
174 .probe = dove_thermal_probe,
175 .remove = dove_thermal_exit,
177 .name = "dove_thermal",
178 .of_match_table = dove_thermal_id_table,
182 module_platform_driver(dove_thermal_driver);
184 MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
185 MODULE_DESCRIPTION("Dove thermal driver");
186 MODULE_LICENSE("GPL");