1 // SPDX-License-Identifier: GPL-2.0+
4 * Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc
13 #include <linux/delay.h>
14 #include <asm/global_data.h>
16 #include "sysreset_mpc83xx.h"
18 /* Magic 4-byte word to enable reset ('RSTE' in ASCII) */
19 static const u32 RPR_MAGIC = 0x52535445;
20 /* Wait at most 2000ms for reset control enable bit */
21 static const uint RESET_WAIT_TIMEOUT = 2000;
24 * __do_reset() - Execute the system reset
26 * Return: The functions resets the system, and never returns.
28 static int __do_reset(void)
33 immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
35 puts("Resetting the board.\n");
37 /* Interrupts and MMU off */
39 msr &= ~(MSR_EE | MSR_IR | MSR_DR);
42 /* Enable Reset Control Reg */
43 out_be32(&immap->reset.rpr, RPR_MAGIC);
47 /* Confirm Reset Control Reg is enabled */
48 res = wait_for_bit_be32(&immap->reset.rcer, RCER_CRE, true,
49 RESET_WAIT_TIMEOUT, false);
51 debug("%s: Timed out waiting for reset control to be set\n",
58 /* Perform reset, only one bit */
59 out_be32(&immap->reset.rcr, RCR_SWHR);
65 static int mpc83xx_sysreset_request(struct udevice *dev, enum sysreset_t type)
72 return -EPROTONOSUPPORT;
79 * print_83xx_arb_event() - Print arbiter events to buffer
80 * @force: Print arbiter events, even if none are indicated by the system
81 * @buf: The buffer to receive the printed arbiter event information
82 * @size: The size of the buffer to receive the printed arbiter event
83 * information in bytes
85 * Return: Number of bytes printed to buffer, -ve on error
87 static int print_83xx_arb_event(bool force, char *buf, int size)
89 int etype = (gd->arch.arbiter_event_attributes & AEATR_EVENT)
91 int mstr_id = (gd->arch.arbiter_event_attributes & AEATR_MSTR_ID)
92 >> AEATR_MSTR_ID_SHIFT;
93 int tbst = (gd->arch.arbiter_event_attributes & AEATR_TBST)
95 int tsize = (gd->arch.arbiter_event_attributes & AEATR_TSIZE)
97 int ttype = (gd->arch.arbiter_event_attributes & AEATR_TTYPE)
99 int tsize_val = (tbst << 3) | tsize;
100 int tsize_bytes = tbst ? (tsize ? tsize : 8) : 16 + 8 * tsize;
104 * If we don't force output, and there is no event (event address ==
105 * 0), then don't print anything
107 if (!force && !gd->arch.arbiter_event_address)
110 if (CONFIG_IS_ENABLED(DISPLAY_AER_FULL)) {
111 res = snprintf(buf, size,
112 "Arbiter Event Status:\n"
116 " %s: 0x%1x = %d bytes\n"
117 " %s: 0x%02x = %s\n",
118 "Event Address", gd->arch.arbiter_event_address,
119 "Event Type", etype, event[etype],
120 "Master ID", mstr_id, master[mstr_id],
121 "Transfer Size", tsize_val, tsize_bytes,
122 "Transfer Type", ttype, transfer[ttype]);
123 } else if (CONFIG_IS_ENABLED(DISPLAY_AER_BRIEF)) {
124 res = snprintf(buf, size,
125 "Arbiter Event Status: AEATR=0x%08lX, AEADR=0x%08lX\n",
126 gd->arch.arbiter_event_attributes,
127 gd->arch.arbiter_event_address);
133 static int mpc83xx_sysreset_get_status(struct udevice *dev, char *buf, int size)
135 /* Ad-hoc data structure to map RSR bit values to their descriptions */
136 static const struct {
137 /* Bit mask for the bit in question */
139 /* Description of the bitmask in question */
143 RSR_SWSR, "Software Soft"}, {
144 RSR_SWHR, "Software Hard"}, {
145 RSR_JSRS, "JTAG Soft"}, {
146 RSR_CSHR, "Check Stop"}, {
147 RSR_SWRS, "Software Watchdog"}, {
148 RSR_BMRS, "Bus Monitor"}, {
149 RSR_SRS, "External/Internal Soft"}, {
150 RSR_HRS, "External/Internal Hard"}
153 ulong rsr = gd->arch.reset_status;
157 res = snprintf(buf, size, "Reset Status:");
159 debug("%s: Could not write reset status message (err = %d)\n",
168 for (i = 0; i < ARRAY_SIZE(bits); i++)
169 /* Print description of set bits */
170 if (rsr & bits[i].mask) {
171 res = snprintf(buf, size, "%s%s%s", sep, bits[i].desc,
172 (i == ARRAY_SIZE(bits) - 1) ? "\n" : "");
174 debug("%s: Could not write reset status message (err = %d)\n",
184 * TODO(mario.six@gdsys.cc): Move this into a dedicated
187 if (CONFIG_IS_ENABLED(DISPLAY_AER_FULL) ||
188 CONFIG_IS_ENABLED(DISPLAY_AER_BRIEF)) {
190 * If there was a bus monitor reset event, we force the arbiter
191 * event to be printed
193 res = print_83xx_arb_event(rsr & RSR_BMRS, buf, size);
195 debug("%s: Could not write arbiter event message (err = %d)\n",
202 snprintf(buf, size, "\n");
207 static struct sysreset_ops mpc83xx_sysreset = {
208 .request = mpc83xx_sysreset_request,
209 .get_status = mpc83xx_sysreset_get_status,
212 U_BOOT_DRIVER(sysreset_mpc83xx) = {
213 .name = "mpc83xx_sysreset",
214 .id = UCLASS_SYSRESET,
215 .ops = &mpc83xx_sysreset,