1 // SPDX-License-Identifier: GPL-2.0
3 * NVIDIA Tegra SPI-SLINK controller
5 * Copyright (c) 2010-2013 NVIDIA Corporation
12 #include <asm/global_data.h>
14 #include <asm/arch/clock.h>
15 #include <asm/arch-tegra/clk_rst.h>
18 #include <linux/bitops.h>
19 #include <linux/delay.h>
20 #include "tegra_spi.h"
22 DECLARE_GLOBAL_DATA_PTR;
25 #define SLINK_CMD_ENB BIT(31)
26 #define SLINK_CMD_GO BIT(30)
27 #define SLINK_CMD_M_S BIT(28)
28 #define SLINK_CMD_IDLE_SCLK_DRIVE_LOW (0 << 24)
29 #define SLINK_CMD_IDLE_SCLK_DRIVE_HIGH BIT(24)
30 #define SLINK_CMD_IDLE_SCLK_PULL_LOW (2 << 24)
31 #define SLINK_CMD_IDLE_SCLK_PULL_HIGH (3 << 24)
32 #define SLINK_CMD_IDLE_SCLK_MASK (3 << 24)
33 #define SLINK_CMD_CK_SDA BIT(21)
34 #define SLINK_CMD_CS_POL BIT(13)
35 #define SLINK_CMD_CS_VAL BIT(12)
36 #define SLINK_CMD_CS_SOFT BIT(11)
37 #define SLINK_CMD_BIT_LENGTH BIT(4)
38 #define SLINK_CMD_BIT_LENGTH_MASK GENMASK(4, 0)
40 #define SLINK_CMD2_TXEN BIT(30)
41 #define SLINK_CMD2_RXEN BIT(31)
42 #define SLINK_CMD2_SS_EN BIT(18)
43 #define SLINK_CMD2_SS_EN_SHIFT 18
44 #define SLINK_CMD2_SS_EN_MASK GENMASK(19, 18)
45 #define SLINK_CMD2_CS_ACTIVE_BETWEEN BIT(17)
47 #define SLINK_STAT_BSY BIT(31)
48 #define SLINK_STAT_RDY BIT(30)
49 #define SLINK_STAT_ERR BIT(29)
50 #define SLINK_STAT_RXF_FLUSH BIT(27)
51 #define SLINK_STAT_TXF_FLUSH BIT(26)
52 #define SLINK_STAT_RXF_OVF BIT(25)
53 #define SLINK_STAT_TXF_UNR BIT(24)
54 #define SLINK_STAT_RXF_EMPTY BIT(23)
55 #define SLINK_STAT_RXF_FULL BIT(22)
56 #define SLINK_STAT_TXF_EMPTY BIT(21)
57 #define SLINK_STAT_TXF_FULL BIT(20)
58 #define SLINK_STAT_TXF_OVF BIT(19)
59 #define SLINK_STAT_RXF_UNR BIT(18)
60 #define SLINK_STAT_CUR_BLKCNT BIT(15)
62 #define SLINK_STAT2_RXF_FULL_CNT BIT(16)
63 #define SLINK_STAT2_TXF_FULL_CNT BIT(0)
65 #define SPI_TIMEOUT 1000
66 #define TEGRA_SPI_MAX_FREQ 52000000
69 u32 command; /* SLINK_COMMAND_0 register */
70 u32 command2; /* SLINK_COMMAND2_0 reg */
71 u32 status; /* SLINK_STATUS_0 register */
72 u32 reserved; /* Reserved offset 0C */
73 u32 mas_data; /* SLINK_MAS_DATA_0 reg */
74 u32 slav_data; /* SLINK_SLAVE_DATA_0 reg */
75 u32 dma_ctl; /* SLINK_DMA_CTL_0 register */
76 u32 status2; /* SLINK_STATUS2_0 reg */
77 u32 rsvd[56]; /* 0x20 to 0xFF reserved */
78 u32 tx_fifo; /* SLINK_TX_FIFO_0 reg off 100h */
79 u32 rsvd2[31]; /* 0x104 to 0x17F reserved */
80 u32 rx_fifo; /* SLINK_RX_FIFO_0 reg off 180h */
83 struct tegra30_spi_priv {
84 struct spi_regs *regs;
89 int last_transaction_us;
92 struct tegra_spi_slave {
93 struct spi_slave slave;
94 struct tegra30_spi_priv *ctrl;
97 static int tegra30_spi_of_to_plat(struct udevice *bus)
99 struct tegra_spi_plat *plat = dev_get_plat(bus);
100 const void *blob = gd->fdt_blob;
101 int node = dev_of_offset(bus);
103 plat->base = dev_read_addr(bus);
104 plat->periph_id = clock_decode_periph_id(bus);
106 if (plat->periph_id == PERIPH_ID_NONE) {
107 debug("%s: could not decode periph id %d\n", __func__,
109 return -FDT_ERR_NOTFOUND;
112 /* Use 500KHz as a suitable default */
113 plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",
115 plat->deactivate_delay_us = fdtdec_get_int(blob, node,
116 "spi-deactivate-delay", 0);
117 debug("%s: base=%#08lx, periph_id=%d, max-frequency=%d, deactivate_delay=%d\n",
118 __func__, plat->base, plat->periph_id, plat->frequency,
119 plat->deactivate_delay_us);
124 static int tegra30_spi_probe(struct udevice *bus)
126 struct tegra_spi_plat *plat = dev_get_plat(bus);
127 struct tegra30_spi_priv *priv = dev_get_priv(bus);
129 priv->regs = (struct spi_regs *)plat->base;
131 priv->last_transaction_us = timer_get_us();
132 priv->freq = plat->frequency;
133 priv->periph_id = plat->periph_id;
135 /* Change SPI clock to correct frequency, PLLP_OUT0 source */
136 clock_start_periph_pll(priv->periph_id, CLOCK_ID_PERIPH,
142 static int tegra30_spi_claim_bus(struct udevice *dev)
144 struct udevice *bus = dev->parent;
145 struct tegra30_spi_priv *priv = dev_get_priv(bus);
146 struct spi_regs *regs = priv->regs;
149 /* Change SPI clock to correct frequency, PLLP_OUT0 source */
150 clock_start_periph_pll(priv->periph_id, CLOCK_ID_PERIPH,
153 /* Clear stale status here */
154 reg = SLINK_STAT_RDY | SLINK_STAT_RXF_FLUSH | SLINK_STAT_TXF_FLUSH | \
155 SLINK_STAT_RXF_UNR | SLINK_STAT_TXF_OVF;
156 writel(reg, ®s->status);
157 debug("%s: STATUS = %08x\n", __func__, readl(®s->status));
159 /* Set master mode and sw controlled CS */
160 reg = readl(®s->command);
161 reg |= SLINK_CMD_M_S | SLINK_CMD_CS_SOFT;
162 writel(reg, ®s->command);
163 debug("%s: COMMAND = %08x\n", __func__, readl(®s->command));
168 static void spi_cs_activate(struct udevice *dev)
170 struct udevice *bus = dev->parent;
171 struct tegra_spi_plat *pdata = dev_get_plat(bus);
172 struct tegra30_spi_priv *priv = dev_get_priv(bus);
174 /* If it's too soon to do another transaction, wait */
175 if (pdata->deactivate_delay_us &&
176 priv->last_transaction_us) {
177 ulong delay_us; /* The delay completed so far */
178 delay_us = timer_get_us() - priv->last_transaction_us;
179 if (delay_us < pdata->deactivate_delay_us)
180 udelay(pdata->deactivate_delay_us - delay_us);
183 /* CS is negated on Tegra, so drive a 1 to get a 0 */
184 setbits_le32(&priv->regs->command, SLINK_CMD_CS_VAL);
187 static void spi_cs_deactivate(struct udevice *dev)
189 struct udevice *bus = dev->parent;
190 struct tegra_spi_plat *pdata = dev_get_plat(bus);
191 struct tegra30_spi_priv *priv = dev_get_priv(bus);
193 /* CS is negated on Tegra, so drive a 0 to get a 1 */
194 clrbits_le32(&priv->regs->command, SLINK_CMD_CS_VAL);
196 /* Remember time of this transaction so we can honour the bus delay */
197 if (pdata->deactivate_delay_us)
198 priv->last_transaction_us = timer_get_us();
201 static int tegra30_spi_xfer(struct udevice *dev, unsigned int bitlen,
202 const void *data_out, void *data_in,
205 struct udevice *bus = dev->parent;
206 struct tegra30_spi_priv *priv = dev_get_priv(bus);
207 struct spi_regs *regs = priv->regs;
208 u32 reg, tmpdout, tmpdin = 0;
209 const u8 *dout = data_out;
214 debug("%s: slave %u:%u dout %p din %p bitlen %u\n",
215 __func__, dev_seq(bus), spi_chip_select(dev), dout, din, bitlen);
218 num_bytes = bitlen / 8;
222 reg = readl(®s->status);
223 writel(reg, ®s->status); /* Clear all SPI events via R/W */
224 debug("%s entry: STATUS = %08x\n", __func__, reg);
226 reg = readl(®s->status2);
227 writel(reg, ®s->status2); /* Clear all STATUS2 events via R/W */
228 debug("%s entry: STATUS2 = %08x\n", __func__, reg);
230 debug("%s entry: COMMAND = %08x\n", __func__, readl(®s->command));
232 clrsetbits_le32(®s->command2, SLINK_CMD2_SS_EN_MASK,
233 SLINK_CMD2_TXEN | SLINK_CMD2_RXEN |
234 (spi_chip_select(dev) << SLINK_CMD2_SS_EN_SHIFT));
235 debug("%s entry: COMMAND2 = %08x\n", __func__, readl(®s->command2));
237 if (flags & SPI_XFER_BEGIN)
238 spi_cs_activate(dev);
240 /* handle data in 32-bit chunks */
241 while (num_bytes > 0) {
247 bytes = (num_bytes > 4) ? 4 : num_bytes;
250 for (i = 0; i < bytes; ++i)
251 tmpdout = (tmpdout << 8) | dout[i];
257 clrsetbits_le32(®s->command, SLINK_CMD_BIT_LENGTH_MASK,
259 writel(tmpdout, ®s->tx_fifo);
260 setbits_le32(®s->command, SLINK_CMD_GO);
263 * Wait for SPI transmit FIFO to empty, or to time out.
264 * The RX FIFO status will be read and cleared last
266 for (tm = 0, is_read = 0; tm < SPI_TIMEOUT; ++tm) {
269 status = readl(®s->status);
271 /* We can exit when we've had both RX and TX activity */
272 if (is_read && (status & SLINK_STAT_TXF_EMPTY))
275 if ((status & (SLINK_STAT_BSY | SLINK_STAT_RDY)) !=
279 else if (!(status & SLINK_STAT_RXF_EMPTY)) {
280 tmpdin = readl(®s->rx_fifo);
283 /* swap bytes read in */
285 for (i = bytes - 1; i >= 0; --i) {
286 din[i] = tmpdin & 0xff;
294 if (tm >= SPI_TIMEOUT)
297 /* clear ACK RDY, etc. bits */
298 writel(readl(®s->status), ®s->status);
301 if (flags & SPI_XFER_END)
302 spi_cs_deactivate(dev);
304 debug("%s: transfer ended. Value=%08x, status = %08x\n",
305 __func__, tmpdin, readl(®s->status));
308 printf("%s: timeout during SPI transfer, tm %d\n",
316 static int tegra30_spi_set_speed(struct udevice *bus, uint speed)
318 struct tegra_spi_plat *plat = dev_get_plat(bus);
319 struct tegra30_spi_priv *priv = dev_get_priv(bus);
321 if (speed > plat->frequency)
322 speed = plat->frequency;
324 debug("%s: regs=%p, speed=%d\n", __func__, priv->regs, priv->freq);
329 static int tegra30_spi_set_mode(struct udevice *bus, uint mode)
331 struct tegra30_spi_priv *priv = dev_get_priv(bus);
332 struct spi_regs *regs = priv->regs;
335 reg = readl(®s->command);
337 /* Set CPOL and CPHA */
338 reg &= ~(SLINK_CMD_IDLE_SCLK_MASK | SLINK_CMD_CK_SDA);
340 reg |= SLINK_CMD_CK_SDA;
343 reg |= SLINK_CMD_IDLE_SCLK_DRIVE_HIGH;
345 reg |= SLINK_CMD_IDLE_SCLK_DRIVE_LOW;
347 writel(reg, ®s->command);
350 debug("%s: regs=%p, mode=%d\n", __func__, priv->regs, priv->mode);
355 static const struct dm_spi_ops tegra30_spi_ops = {
356 .claim_bus = tegra30_spi_claim_bus,
357 .xfer = tegra30_spi_xfer,
358 .set_speed = tegra30_spi_set_speed,
359 .set_mode = tegra30_spi_set_mode,
361 * cs_info is not needed, since we require all chip selects to be
362 * in the device tree explicitly
366 static const struct udevice_id tegra30_spi_ids[] = {
367 { .compatible = "nvidia,tegra20-slink" },
371 U_BOOT_DRIVER(tegra30_spi) = {
372 .name = "tegra20_slink",
374 .of_match = tegra30_spi_ids,
375 .ops = &tegra30_spi_ops,
376 .of_to_plat = tegra30_spi_of_to_plat,
377 .plat_auto = sizeof(struct tegra_spi_plat),
378 .priv_auto = sizeof(struct tegra30_spi_priv),
379 .probe = tegra30_spi_probe,