drivers/spi/stm32_qspi.c

   1 /*
   2  * (C) Copyright 2016
   3  *
   4  * Michael Kurz, <michi.kurz@gmail.com>
   5  *
   6  * STM32 QSPI driver
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #include <common.h>
  12 #include <malloc.h>
  13 #include <spi.h>
  14 #include <spi_flash.h>
  15 #include <asm/io.h>
  16 #include <dm.h>
  17 #include <errno.h>
  18 #include <asm/arch/stm32.h>
  19 #include <asm/arch/stm32_defs.h>
  20 #include <clk.h>
  21
  22 DECLARE_GLOBAL_DATA_PTR;
  23
  24 struct stm32_qspi_regs {
  25         u32 cr;         /* 0x00 */
  26         u32 dcr;        /* 0x04 */
  27         u32 sr;         /* 0x08 */
  28         u32 fcr;        /* 0x0C */
  29         u32 dlr;        /* 0x10 */
  30         u32 ccr;        /* 0x14 */
  31         u32 ar;         /* 0x18 */
  32         u32 abr;        /* 0x1C */
  33         u32 dr;         /* 0x20 */
  34         u32 psmkr;      /* 0x24 */
  35         u32 psmar;      /* 0x28 */
  36         u32 pir;        /* 0x2C */
  37         u32 lptr;       /* 0x30 */
  38 };
  39
  40 /*
  41  * QUADSPI control register
  42  */
  43 #define STM32_QSPI_CR_EN                BIT(0)
  44 #define STM32_QSPI_CR_ABORT             BIT(1)
  45 #define STM32_QSPI_CR_DMAEN             BIT(2)
  46 #define STM32_QSPI_CR_TCEN              BIT(3)
  47 #define STM32_QSPI_CR_SSHIFT            BIT(4)
  48 #define STM32_QSPI_CR_DFM               BIT(6)
  49 #define STM32_QSPI_CR_FSEL              BIT(7)
  50 #define STM32_QSPI_CR_FTHRES_MASK       GENMASK(4, 0)
  51 #define STM32_QSPI_CR_FTHRES_SHIFT      (8)
  52 #define STM32_QSPI_CR_TEIE              BIT(16)
  53 #define STM32_QSPI_CR_TCIE              BIT(17)
  54 #define STM32_QSPI_CR_FTIE              BIT(18)
  55 #define STM32_QSPI_CR_SMIE              BIT(19)
  56 #define STM32_QSPI_CR_TOIE              BIT(20)
  57 #define STM32_QSPI_CR_APMS              BIT(22)
  58 #define STM32_QSPI_CR_PMM               BIT(23)
  59 #define STM32_QSPI_CR_PRESCALER_MASK    GENMASK(7, 0)
  60 #define STM32_QSPI_CR_PRESCALER_SHIFT   (24)
  61
  62 /*
  63  * QUADSPI device configuration register
  64  */
  65 #define STM32_QSPI_DCR_CKMODE           BIT(0)
  66 #define STM32_QSPI_DCR_CSHT_MASK        GENMASK(2, 0)
  67 #define STM32_QSPI_DCR_CSHT_SHIFT       (8)
  68 #define STM32_QSPI_DCR_FSIZE_MASK       GENMASK(4, 0)
  69 #define STM32_QSPI_DCR_FSIZE_SHIFT      (16)
  70
  71 /*
  72  * QUADSPI status register
  73  */
  74 #define STM32_QSPI_SR_TEF               BIT(0)
  75 #define STM32_QSPI_SR_TCF               BIT(1)
  76 #define STM32_QSPI_SR_FTF               BIT(2)
  77 #define STM32_QSPI_SR_SMF               BIT(3)
  78 #define STM32_QSPI_SR_TOF               BIT(4)
  79 #define STM32_QSPI_SR_BUSY              BIT(5)
  80 #define STM32_QSPI_SR_FLEVEL_MASK       GENMASK(5, 0)
  81 #define STM32_QSPI_SR_FLEVEL_SHIFT      (8)
  82
  83 /*
  84  * QUADSPI flag clear register
  85  */
  86 #define STM32_QSPI_FCR_CTEF             BIT(0)
  87 #define STM32_QSPI_FCR_CTCF             BIT(1)
  88 #define STM32_QSPI_FCR_CSMF             BIT(3)
  89 #define STM32_QSPI_FCR_CTOF             BIT(4)
  90
  91 /*
  92  * QUADSPI communication configuration register
  93  */
  94 #define STM32_QSPI_CCR_DDRM             BIT(31)
  95 #define STM32_QSPI_CCR_DHHC             BIT(30)
  96 #define STM32_QSPI_CCR_SIOO             BIT(28)
  97 #define STM32_QSPI_CCR_FMODE_SHIFT      (26)
  98 #define STM32_QSPI_CCR_DMODE_SHIFT      (24)
  99 #define STM32_QSPI_CCR_DCYC_SHIFT       (18)
 100 #define STM32_QSPI_CCR_DCYC_MASK        GENMASK(4, 0)
 101 #define STM32_QSPI_CCR_ABSIZE_SHIFT     (16)
 102 #define STM32_QSPI_CCR_ABMODE_SHIFT     (14)
 103 #define STM32_QSPI_CCR_ADSIZE_SHIFT     (12)
 104 #define STM32_QSPI_CCR_ADMODE_SHIFT     (10)
 105 #define STM32_QSPI_CCR_IMODE_SHIFT      (8)
 106 #define STM32_QSPI_CCR_INSTRUCTION_MASK GENMASK(7, 0)
 107
 108 enum STM32_QSPI_CCR_IMODE {
 109         STM32_QSPI_CCR_IMODE_NONE = 0,
 110         STM32_QSPI_CCR_IMODE_ONE_LINE = 1,
 111         STM32_QSPI_CCR_IMODE_TWO_LINE = 2,
 112         STM32_QSPI_CCR_IMODE_FOUR_LINE = 3,
 113 };
 114
 115 enum STM32_QSPI_CCR_ADMODE {
 116         STM32_QSPI_CCR_ADMODE_NONE = 0,
 117         STM32_QSPI_CCR_ADMODE_ONE_LINE = 1,
 118         STM32_QSPI_CCR_ADMODE_TWO_LINE = 2,
 119         STM32_QSPI_CCR_ADMODE_FOUR_LINE = 3,
 120 };
 121
 122 enum STM32_QSPI_CCR_ADSIZE {
 123         STM32_QSPI_CCR_ADSIZE_8BIT = 0,
 124         STM32_QSPI_CCR_ADSIZE_16BIT = 1,
 125         STM32_QSPI_CCR_ADSIZE_24BIT = 2,
 126         STM32_QSPI_CCR_ADSIZE_32BIT = 3,
 127 };
 128
 129 enum STM32_QSPI_CCR_ABMODE {
 130         STM32_QSPI_CCR_ABMODE_NONE = 0,
 131         STM32_QSPI_CCR_ABMODE_ONE_LINE = 1,
 132         STM32_QSPI_CCR_ABMODE_TWO_LINE = 2,
 133         STM32_QSPI_CCR_ABMODE_FOUR_LINE = 3,
 134 };
 135
 136 enum STM32_QSPI_CCR_ABSIZE {
 137         STM32_QSPI_CCR_ABSIZE_8BIT = 0,
 138         STM32_QSPI_CCR_ABSIZE_16BIT = 1,
 139         STM32_QSPI_CCR_ABSIZE_24BIT = 2,
 140         STM32_QSPI_CCR_ABSIZE_32BIT = 3,
 141 };
 142
 143 enum STM32_QSPI_CCR_DMODE {
 144         STM32_QSPI_CCR_DMODE_NONE = 0,
 145         STM32_QSPI_CCR_DMODE_ONE_LINE = 1,
 146         STM32_QSPI_CCR_DMODE_TWO_LINE = 2,
 147         STM32_QSPI_CCR_DMODE_FOUR_LINE = 3,
 148 };
 149
 150 enum STM32_QSPI_CCR_FMODE {
 151         STM32_QSPI_CCR_IND_WRITE = 0,
 152         STM32_QSPI_CCR_IND_READ = 1,
 153         STM32_QSPI_CCR_AUTO_POLL = 2,
 154         STM32_QSPI_CCR_MEM_MAP = 3,
 155 };
 156
 157 /* default SCK frequency, unit: HZ */
 158 #define STM32_QSPI_DEFAULT_SCK_FREQ 108000000
 159
 160 struct stm32_qspi_platdata {
 161         u32 base;
 162         u32 memory_map;
 163         u32 max_hz;
 164 };
 165
 166 struct stm32_qspi_priv {
 167         struct stm32_qspi_regs *regs;
 168         u32 max_hz;
 169         u32 mode;
 170
 171         u32 command;
 172         u32 address;
 173         u32 dummycycles;
 174 #define CMD_HAS_ADR     BIT(24)
 175 #define CMD_HAS_DUMMY   BIT(25)
 176 #define CMD_HAS_DATA    BIT(26)
 177 };
 178
 179 static void _stm32_qspi_disable(struct stm32_qspi_priv *priv)
 180 {
 181         clrbits_le32(&priv->regs->cr, STM32_QSPI_CR_EN);
 182 }
 183
 184 static void _stm32_qspi_enable(struct stm32_qspi_priv *priv)
 185 {
 186         setbits_le32(&priv->regs->cr, STM32_QSPI_CR_EN);
 187 }
 188
 189 static void _stm32_qspi_wait_for_not_busy(struct stm32_qspi_priv *priv)
 190 {
 191         while (readl(&priv->regs->sr) & STM32_QSPI_SR_BUSY)
 192                 ;
 193 }
 194
 195 static void _stm32_qspi_wait_for_complete(struct stm32_qspi_priv *priv)
 196 {
 197         while (!(readl(&priv->regs->sr) & STM32_QSPI_SR_TCF))
 198                 ;
 199 }
 200
 201 static void _stm32_qspi_wait_for_ftf(struct stm32_qspi_priv *priv)
 202 {
 203         while (!(readl(&priv->regs->sr) & STM32_QSPI_SR_FTF))
 204                 ;
 205 }
 206
 207 static void _stm32_qspi_set_flash_size(struct stm32_qspi_priv *priv, u32 size)
 208 {
 209         u32 fsize = fls(size) - 1;
 210         clrsetbits_le32(&priv->regs->dcr,
 211                         STM32_QSPI_DCR_FSIZE_MASK << STM32_QSPI_DCR_FSIZE_SHIFT,
 212                         fsize << STM32_QSPI_DCR_FSIZE_SHIFT);
 213 }
 214
 215 static unsigned int _stm32_qspi_gen_ccr(struct stm32_qspi_priv *priv)
 216 {
 217         unsigned int ccr_reg = 0;
 218         u8 imode, admode, dmode;
 219         u32 mode = priv->mode;
 220         u32 cmd = (priv->command & STM32_QSPI_CCR_INSTRUCTION_MASK);
 221
 222         imode = STM32_QSPI_CCR_IMODE_ONE_LINE;
 223         admode = STM32_QSPI_CCR_ADMODE_ONE_LINE;
 224
 225         if (mode & SPI_RX_QUAD) {
 226                 dmode = STM32_QSPI_CCR_DMODE_FOUR_LINE;
 227                 if (mode & SPI_TX_QUAD) {
 228                         imode = STM32_QSPI_CCR_IMODE_FOUR_LINE;
 229                         admode = STM32_QSPI_CCR_ADMODE_FOUR_LINE;
 230                 }
 231         } else if (mode & SPI_RX_DUAL) {
 232                 dmode = STM32_QSPI_CCR_DMODE_TWO_LINE;
 233                 if (mode & SPI_TX_DUAL) {
 234                         imode = STM32_QSPI_CCR_IMODE_TWO_LINE;
 235                         admode = STM32_QSPI_CCR_ADMODE_TWO_LINE;
 236                 }
 237         } else {
 238                 dmode = STM32_QSPI_CCR_DMODE_ONE_LINE;
 239         }
 240
 241         if (priv->command & CMD_HAS_DATA)
 242                 ccr_reg |= (dmode << STM32_QSPI_CCR_DMODE_SHIFT);
 243
 244         if (priv->command & CMD_HAS_DUMMY)
 245                 ccr_reg |= ((priv->dummycycles & STM32_QSPI_CCR_DCYC_MASK)
 246                                 << STM32_QSPI_CCR_DCYC_SHIFT);
 247
 248         if (priv->command & CMD_HAS_ADR) {
 249                 ccr_reg |= (STM32_QSPI_CCR_ADSIZE_24BIT
 250                                 << STM32_QSPI_CCR_ADSIZE_SHIFT);
 251                 ccr_reg |= (admode << STM32_QSPI_CCR_ADMODE_SHIFT);
 252         }
 253         ccr_reg |= (imode << STM32_QSPI_CCR_IMODE_SHIFT);
 254         ccr_reg |= cmd;
 255         return ccr_reg;
 256 }
 257
 258 static void _stm32_qspi_enable_mmap(struct stm32_qspi_priv *priv,
 259                 struct spi_flash *flash)
 260 {
 261         priv->command = flash->read_cmd | CMD_HAS_ADR | CMD_HAS_DATA
 262                         | CMD_HAS_DUMMY;
 263         priv->dummycycles = flash->dummy_byte * 8;
 264
 265         unsigned int ccr_reg = _stm32_qspi_gen_ccr(priv);
 266         ccr_reg |= (STM32_QSPI_CCR_MEM_MAP << STM32_QSPI_CCR_FMODE_SHIFT);
 267
 268         _stm32_qspi_wait_for_not_busy(priv);
 269
 270         writel(ccr_reg, &priv->regs->ccr);
 271
 272         priv->dummycycles = 0;
 273 }
 274
 275 static void _stm32_qspi_disable_mmap(struct stm32_qspi_priv *priv)
 276 {
 277         setbits_le32(&priv->regs->cr, STM32_QSPI_CR_ABORT);
 278 }
 279
 280 static void _stm32_qspi_set_xfer_length(struct stm32_qspi_priv *priv,
 281                                         u32 length)
 282 {
 283         writel(length - 1, &priv->regs->dlr);
 284 }
 285
 286 static void _stm32_qspi_start_xfer(struct stm32_qspi_priv *priv, u32 cr_reg)
 287 {
 288         writel(cr_reg, &priv->regs->ccr);
 289
 290         if (priv->command & CMD_HAS_ADR)
 291                 writel(priv->address, &priv->regs->ar);
 292 }
 293
 294 static int _stm32_qspi_xfer(struct stm32_qspi_priv *priv,
 295                 struct spi_flash *flash, unsigned int bitlen,
 296                 const u8 *dout, u8 *din, unsigned long flags)
 297 {
 298         unsigned int words = bitlen / 8;
 299
 300         if (flags & SPI_XFER_MMAP) {
 301                 _stm32_qspi_enable_mmap(priv, flash);
 302                 return 0;
 303         } else if (flags & SPI_XFER_MMAP_END) {
 304                 _stm32_qspi_disable_mmap(priv);
 305                 return 0;
 306         }
 307
 308         if (bitlen == 0)
 309                 return -1;
 310
 311         if (bitlen % 8) {
 312                 debug("spi_xfer: Non byte aligned SPI transfer\n");
 313                 return -1;
 314         }
 315
 316         if (dout && din) {
 317                 debug("spi_xfer: QSPI cannot have data in and data out set\n");
 318                 return -1;
 319         }
 320
 321         if (!dout && (flags & SPI_XFER_BEGIN)) {
 322                 debug("spi_xfer: QSPI transfer must begin with command\n");
 323                 return -1;
 324         }
 325
 326         if (dout) {
 327                 if (flags & SPI_XFER_BEGIN) {
 328                         /* data is command */
 329                         priv->command = dout[0] | CMD_HAS_DATA;
 330                         if (words >= 4) {
 331                                 /* address is here too */
 332                                 priv->address = (dout[1] << 16) |
 333                                                 (dout[2] << 8) | dout[3];
 334                                 priv->command |= CMD_HAS_ADR;
 335                         }
 336
 337                         if (words > 4) {
 338                                 /* rest is dummy bytes */
 339                                 priv->dummycycles = (words - 4) * 8;
 340                                 priv->command |= CMD_HAS_DUMMY;
 341                         }
 342
 343                         if (flags & SPI_XFER_END) {
 344                                 /* command without data */
 345                                 priv->command &= ~(CMD_HAS_DATA);
 346                         }
 347                 }
 348
 349                 if (flags & SPI_XFER_END) {
 350                         u32 ccr_reg = _stm32_qspi_gen_ccr(priv);
 351                         ccr_reg |= STM32_QSPI_CCR_IND_WRITE
 352                                         << STM32_QSPI_CCR_FMODE_SHIFT;
 353
 354                         _stm32_qspi_wait_for_not_busy(priv);
 355
 356                         if (priv->command & CMD_HAS_DATA)
 357                                 _stm32_qspi_set_xfer_length(priv, words);
 358
 359                         _stm32_qspi_start_xfer(priv, ccr_reg);
 360
 361                         debug("%s: write: ccr:0x%08x adr:0x%08x\n",
 362                               __func__, priv->regs->ccr, priv->regs->ar);
 363
 364                         if (priv->command & CMD_HAS_DATA) {
 365                                 _stm32_qspi_wait_for_ftf(priv);
 366
 367                                 debug("%s: words:%d data:", __func__, words);
 368
 369                                 int i = 0;
 370                                 while (words > i) {
 371                                         writeb(dout[i], &priv->regs->dr);
 372                                         debug("%02x ", dout[i]);
 373                                         i++;
 374                                 }
 375                                 debug("\n");
 376
 377                                 _stm32_qspi_wait_for_complete(priv);
 378                         } else {
 379                                 _stm32_qspi_wait_for_not_busy(priv);
 380                         }
 381                 }
 382         } else if (din) {
 383                 u32 ccr_reg = _stm32_qspi_gen_ccr(priv);
 384                 ccr_reg |= STM32_QSPI_CCR_IND_READ
 385                                 << STM32_QSPI_CCR_FMODE_SHIFT;
 386
 387                 _stm32_qspi_wait_for_not_busy(priv);
 388
 389                 _stm32_qspi_set_xfer_length(priv, words);
 390
 391                 _stm32_qspi_start_xfer(priv, ccr_reg);
 392
 393                 debug("%s: read: ccr:0x%08x adr:0x%08x len:%d\n", __func__,
 394                       priv->regs->ccr, priv->regs->ar, priv->regs->dlr);
 395
 396                 debug("%s: data:", __func__);
 397
 398                 int i = 0;
 399                 while (words > i) {
 400                         din[i] = readb(&priv->regs->dr);
 401                         debug("%02x ", din[i]);
 402                         i++;
 403                 }
 404                 debug("\n");
 405         }
 406
 407         return 0;
 408 }
 409
 410 static int stm32_qspi_ofdata_to_platdata(struct udevice *bus)
 411 {
 412         struct fdt_resource res_regs, res_mem;
 413         struct stm32_qspi_platdata *plat = bus->platdata;
 414         const void *blob = gd->fdt_blob;
 415         int node = dev_of_offset(bus);
 416         int ret;
 417
 418         ret = fdt_get_named_resource(blob, node, "reg", "reg-names",
 419                                      "QuadSPI", &res_regs);
 420         if (ret) {
 421                 debug("Error: can't get regs base addresses(ret = %d)!\n", ret);
 422                 return -ENOMEM;
 423         }
 424         ret = fdt_get_named_resource(blob, node, "reg", "reg-names",
 425                                      "QuadSPI-memory", &res_mem);
 426         if (ret) {
 427                 debug("Error: can't get mmap base address(ret = %d)!\n", ret);
 428                 return -ENOMEM;
 429         }
 430
 431         plat->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency",
 432                                         STM32_QSPI_DEFAULT_SCK_FREQ);
 433
 434         plat->base = res_regs.start;
 435         plat->memory_map = res_mem.start;
 436
 437         debug("%s: regs=<0x%x> mapped=<0x%x>, max-frequency=%d\n",
 438               __func__,
 439               plat->base,
 440               plat->memory_map,
 441               plat->max_hz
 442               );
 443
 444         return 0;
 445 }
 446
 447 static int stm32_qspi_probe(struct udevice *bus)
 448 {
 449         struct stm32_qspi_platdata *plat = dev_get_platdata(bus);
 450         struct stm32_qspi_priv *priv = dev_get_priv(bus);
 451         struct dm_spi_bus *dm_spi_bus;
 452
 453         dm_spi_bus = bus->uclass_priv;
 454
 455         dm_spi_bus->max_hz = plat->max_hz;
 456
 457         priv->regs = (struct stm32_qspi_regs *)(uintptr_t)plat->base;
 458
 459         priv->max_hz = plat->max_hz;
 460
 461 #ifdef CONFIG_CLK
 462         int ret;
 463         struct clk clk;
 464         ret = clk_get_by_index(bus, 0, &clk);
 465         if (ret < 0)
 466                 return ret;
 467
 468         ret = clk_enable(&clk);
 469
 470         if (ret) {
 471                 dev_err(bus, "failed to enable clock\n");
 472                 return ret;
 473         }
 474 #endif
 475
 476         setbits_le32(&priv->regs->cr, STM32_QSPI_CR_SSHIFT);
 477
 478         return 0;
 479 }
 480
 481 static int stm32_qspi_remove(struct udevice *bus)
 482 {
 483         return 0;
 484 }
 485
 486 static int stm32_qspi_claim_bus(struct udevice *dev)
 487 {
 488         struct stm32_qspi_priv *priv;
 489         struct udevice *bus;
 490         struct spi_flash *flash;
 491
 492         bus = dev->parent;
 493         priv = dev_get_priv(bus);
 494         flash = dev_get_uclass_priv(dev);
 495
 496         _stm32_qspi_set_flash_size(priv, flash->size);
 497
 498         _stm32_qspi_enable(priv);
 499
 500         return 0;
 501 }
 502
 503 static int stm32_qspi_release_bus(struct udevice *dev)
 504 {
 505         struct stm32_qspi_priv *priv;
 506         struct udevice *bus;
 507
 508         bus = dev->parent;
 509         priv = dev_get_priv(bus);
 510
 511         _stm32_qspi_disable(priv);
 512
 513         return 0;
 514 }
 515
 516 static int stm32_qspi_xfer(struct udevice *dev, unsigned int bitlen,
 517                 const void *dout, void *din, unsigned long flags)
 518 {
 519         struct stm32_qspi_priv *priv;
 520         struct udevice *bus;
 521         struct spi_flash *flash;
 522
 523         bus = dev->parent;
 524         priv = dev_get_priv(bus);
 525         flash = dev_get_uclass_priv(dev);
 526
 527         return _stm32_qspi_xfer(priv, flash, bitlen, (const u8 *)dout,
 528                                 (u8 *)din, flags);
 529 }
 530
 531 static int stm32_qspi_set_speed(struct udevice *bus, uint speed)
 532 {
 533         struct stm32_qspi_platdata *plat = bus->platdata;
 534         struct stm32_qspi_priv *priv = dev_get_priv(bus);
 535
 536         if (speed > plat->max_hz)
 537                 speed = plat->max_hz;
 538
 539         u32 qspi_clk = clock_get(CLOCK_AHB);
 540         u32 prescaler = 255;
 541         if (speed > 0) {
 542                 prescaler = DIV_ROUND_UP(qspi_clk, speed) - 1;
 543                 if (prescaler > 255)
 544                         prescaler = 255;
 545                 else if (prescaler < 0)
 546                         prescaler = 0;
 547         }
 548
 549         u32 csht = DIV_ROUND_UP((5 * qspi_clk) / (prescaler + 1), 100000000);
 550         csht = (csht - 1) & STM32_QSPI_DCR_CSHT_MASK;
 551
 552         _stm32_qspi_wait_for_not_busy(priv);
 553
 554         clrsetbits_le32(&priv->regs->cr,
 555                         STM32_QSPI_CR_PRESCALER_MASK <<
 556                         STM32_QSPI_CR_PRESCALER_SHIFT,
 557                         prescaler << STM32_QSPI_CR_PRESCALER_SHIFT);
 558
 559
 560         clrsetbits_le32(&priv->regs->dcr,
 561                         STM32_QSPI_DCR_CSHT_MASK << STM32_QSPI_DCR_CSHT_SHIFT,
 562                         csht << STM32_QSPI_DCR_CSHT_SHIFT);
 563
 564         debug("%s: regs=%p, speed=%d\n", __func__, priv->regs,
 565               (qspi_clk / (prescaler + 1)));
 566
 567         return 0;
 568 }
 569
 570 static int stm32_qspi_set_mode(struct udevice *bus, uint mode)
 571 {
 572         struct stm32_qspi_priv *priv = dev_get_priv(bus);
 573
 574         _stm32_qspi_wait_for_not_busy(priv);
 575
 576         if ((mode & SPI_CPHA) && (mode & SPI_CPOL))
 577                 setbits_le32(&priv->regs->dcr, STM32_QSPI_DCR_CKMODE);
 578         else if (!(mode & SPI_CPHA) && !(mode & SPI_CPOL))
 579                 clrbits_le32(&priv->regs->dcr, STM32_QSPI_DCR_CKMODE);
 580         else
 581                 return -ENODEV;
 582
 583         if (mode & SPI_CS_HIGH)
 584                 return -ENODEV;
 585
 586         if (mode & SPI_RX_QUAD)
 587                 priv->mode |= SPI_RX_QUAD;
 588         else if (mode & SPI_RX_DUAL)
 589                 priv->mode |= SPI_RX_DUAL;
 590         else
 591                 priv->mode &= ~(SPI_RX_QUAD | SPI_RX_DUAL);
 592
 593         if (mode & SPI_TX_QUAD)
 594                 priv->mode |= SPI_TX_QUAD;
 595         else if (mode & SPI_TX_DUAL)
 596                 priv->mode |= SPI_TX_DUAL;
 597         else
 598                 priv->mode &= ~(SPI_TX_QUAD | SPI_TX_DUAL);
 599
 600         debug("%s: regs=%p, mode=%d rx: ", __func__, priv->regs, mode);
 601
 602         if (mode & SPI_RX_QUAD)
 603                 debug("quad, tx: ");
 604         else if (mode & SPI_RX_DUAL)
 605                 debug("dual, tx: ");
 606         else
 607                 debug("single, tx: ");
 608
 609         if (mode & SPI_TX_QUAD)
 610                 debug("quad\n");
 611         else if (mode & SPI_TX_DUAL)
 612                 debug("dual\n");
 613         else
 614                 debug("single\n");
 615
 616         return 0;
 617 }
 618
 619 static const struct dm_spi_ops stm32_qspi_ops = {
 620         .claim_bus      = stm32_qspi_claim_bus,
 621         .release_bus    = stm32_qspi_release_bus,
 622         .xfer           = stm32_qspi_xfer,
 623         .set_speed      = stm32_qspi_set_speed,
 624         .set_mode       = stm32_qspi_set_mode,
 625 };
 626
 627 static const struct udevice_id stm32_qspi_ids[] = {
 628         { .compatible = "st,stm32-qspi" },
 629         { }
 630 };
 631
 632 U_BOOT_DRIVER(stm32_qspi) = {
 633         .name   = "stm32_qspi",
 634         .id     = UCLASS_SPI,
 635         .of_match = stm32_qspi_ids,
 636         .ops    = &stm32_qspi_ops,
 637         .ofdata_to_platdata = stm32_qspi_ofdata_to_platdata,
 638         .platdata_auto_alloc_size = sizeof(struct stm32_qspi_platdata),
 639         .priv_auto_alloc_size = sizeof(struct stm32_qspi_priv),
 640         .probe  = stm32_qspi_probe,
 641         .remove = stm32_qspi_remove,
 642 };