4 * Copyright (C) 2005 David Brownell
5 * Copyright (C) 2008 Secret Lab Technologies Ltd.
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 #include <linux/kernel.h>
23 #include <linux/kmod.h>
24 #include <linux/device.h>
25 #include <linux/init.h>
26 #include <linux/cache.h>
27 #include <linux/mutex.h>
28 #include <linux/of_device.h>
29 #include <linux/of_irq.h>
30 #include <linux/slab.h>
31 #include <linux/mod_devicetable.h>
32 #include <linux/spi/spi.h>
33 #include <linux/of_gpio.h>
34 #include <linux/pm_runtime.h>
35 #include <linux/export.h>
36 #include <linux/sched/rt.h>
37 #include <linux/delay.h>
38 #include <linux/kthread.h>
39 #include <linux/ioport.h>
40 #include <linux/acpi.h>
42 #define CREATE_TRACE_POINTS
43 #include <trace/events/spi.h>
45 static void spidev_release(struct device *dev)
47 struct spi_device *spi = to_spi_device(dev);
49 /* spi masters may cleanup for released devices */
50 if (spi->master->cleanup)
51 spi->master->cleanup(spi);
53 spi_master_put(spi->master);
58 modalias_show(struct device *dev, struct device_attribute *a, char *buf)
60 const struct spi_device *spi = to_spi_device(dev);
62 return sprintf(buf, "%s%s\n", SPI_MODULE_PREFIX, spi->modalias);
64 static DEVICE_ATTR_RO(modalias);
66 static struct attribute *spi_dev_attrs[] = {
67 &dev_attr_modalias.attr,
70 ATTRIBUTE_GROUPS(spi_dev);
72 /* modalias support makes "modprobe $MODALIAS" new-style hotplug work,
73 * and the sysfs version makes coldplug work too.
76 static const struct spi_device_id *spi_match_id(const struct spi_device_id *id,
77 const struct spi_device *sdev)
80 if (!strcmp(sdev->modalias, id->name))
87 const struct spi_device_id *spi_get_device_id(const struct spi_device *sdev)
89 const struct spi_driver *sdrv = to_spi_driver(sdev->dev.driver);
91 return spi_match_id(sdrv->id_table, sdev);
93 EXPORT_SYMBOL_GPL(spi_get_device_id);
95 static int spi_match_device(struct device *dev, struct device_driver *drv)
97 const struct spi_device *spi = to_spi_device(dev);
98 const struct spi_driver *sdrv = to_spi_driver(drv);
100 /* Attempt an OF style match */
101 if (of_driver_match_device(dev, drv))
105 if (acpi_driver_match_device(dev, drv))
109 return !!spi_match_id(sdrv->id_table, spi);
111 return strcmp(spi->modalias, drv->name) == 0;
114 static int spi_uevent(struct device *dev, struct kobj_uevent_env *env)
116 const struct spi_device *spi = to_spi_device(dev);
118 add_uevent_var(env, "MODALIAS=%s%s", SPI_MODULE_PREFIX, spi->modalias);
122 #ifdef CONFIG_PM_SLEEP
123 static int spi_legacy_suspend(struct device *dev, pm_message_t message)
126 struct spi_driver *drv = to_spi_driver(dev->driver);
128 /* suspend will stop irqs and dma; no more i/o */
131 value = drv->suspend(to_spi_device(dev), message);
133 dev_dbg(dev, "... can't suspend\n");
138 static int spi_legacy_resume(struct device *dev)
141 struct spi_driver *drv = to_spi_driver(dev->driver);
143 /* resume may restart the i/o queue */
146 value = drv->resume(to_spi_device(dev));
148 dev_dbg(dev, "... can't resume\n");
153 static int spi_pm_suspend(struct device *dev)
155 const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
158 return pm_generic_suspend(dev);
160 return spi_legacy_suspend(dev, PMSG_SUSPEND);
163 static int spi_pm_resume(struct device *dev)
165 const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
168 return pm_generic_resume(dev);
170 return spi_legacy_resume(dev);
173 static int spi_pm_freeze(struct device *dev)
175 const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
178 return pm_generic_freeze(dev);
180 return spi_legacy_suspend(dev, PMSG_FREEZE);
183 static int spi_pm_thaw(struct device *dev)
185 const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
188 return pm_generic_thaw(dev);
190 return spi_legacy_resume(dev);
193 static int spi_pm_poweroff(struct device *dev)
195 const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
198 return pm_generic_poweroff(dev);
200 return spi_legacy_suspend(dev, PMSG_HIBERNATE);
203 static int spi_pm_restore(struct device *dev)
205 const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
208 return pm_generic_restore(dev);
210 return spi_legacy_resume(dev);
213 #define spi_pm_suspend NULL
214 #define spi_pm_resume NULL
215 #define spi_pm_freeze NULL
216 #define spi_pm_thaw NULL
217 #define spi_pm_poweroff NULL
218 #define spi_pm_restore NULL
221 static const struct dev_pm_ops spi_pm = {
222 .suspend = spi_pm_suspend,
223 .resume = spi_pm_resume,
224 .freeze = spi_pm_freeze,
226 .poweroff = spi_pm_poweroff,
227 .restore = spi_pm_restore,
229 pm_generic_runtime_suspend,
230 pm_generic_runtime_resume,
235 struct bus_type spi_bus_type = {
237 .dev_groups = spi_dev_groups,
238 .match = spi_match_device,
239 .uevent = spi_uevent,
242 EXPORT_SYMBOL_GPL(spi_bus_type);
245 static int spi_drv_probe(struct device *dev)
247 const struct spi_driver *sdrv = to_spi_driver(dev->driver);
248 struct spi_device *spi = to_spi_device(dev);
251 acpi_dev_pm_attach(&spi->dev, true);
252 ret = sdrv->probe(spi);
254 acpi_dev_pm_detach(&spi->dev, true);
259 static int spi_drv_remove(struct device *dev)
261 const struct spi_driver *sdrv = to_spi_driver(dev->driver);
262 struct spi_device *spi = to_spi_device(dev);
265 ret = sdrv->remove(spi);
266 acpi_dev_pm_detach(&spi->dev, true);
271 static void spi_drv_shutdown(struct device *dev)
273 const struct spi_driver *sdrv = to_spi_driver(dev->driver);
275 sdrv->shutdown(to_spi_device(dev));
279 * spi_register_driver - register a SPI driver
280 * @sdrv: the driver to register
283 int spi_register_driver(struct spi_driver *sdrv)
285 sdrv->driver.bus = &spi_bus_type;
287 sdrv->driver.probe = spi_drv_probe;
289 sdrv->driver.remove = spi_drv_remove;
291 sdrv->driver.shutdown = spi_drv_shutdown;
292 return driver_register(&sdrv->driver);
294 EXPORT_SYMBOL_GPL(spi_register_driver);
296 /*-------------------------------------------------------------------------*/
298 /* SPI devices should normally not be created by SPI device drivers; that
299 * would make them board-specific. Similarly with SPI master drivers.
300 * Device registration normally goes into like arch/.../mach.../board-YYY.c
301 * with other readonly (flashable) information about mainboard devices.
305 struct list_head list;
306 struct spi_board_info board_info;
309 static LIST_HEAD(board_list);
310 static LIST_HEAD(spi_master_list);
313 * Used to protect add/del opertion for board_info list and
314 * spi_master list, and their matching process
316 static DEFINE_MUTEX(board_lock);
319 * spi_alloc_device - Allocate a new SPI device
320 * @master: Controller to which device is connected
323 * Allows a driver to allocate and initialize a spi_device without
324 * registering it immediately. This allows a driver to directly
325 * fill the spi_device with device parameters before calling
326 * spi_add_device() on it.
328 * Caller is responsible to call spi_add_device() on the returned
329 * spi_device structure to add it to the SPI master. If the caller
330 * needs to discard the spi_device without adding it, then it should
331 * call spi_dev_put() on it.
333 * Returns a pointer to the new device, or NULL.
335 struct spi_device *spi_alloc_device(struct spi_master *master)
337 struct spi_device *spi;
338 struct device *dev = master->dev.parent;
340 if (!spi_master_get(master))
343 spi = kzalloc(sizeof(*spi), GFP_KERNEL);
345 dev_err(dev, "cannot alloc spi_device\n");
346 spi_master_put(master);
350 spi->master = master;
351 spi->dev.parent = &master->dev;
352 spi->dev.bus = &spi_bus_type;
353 spi->dev.release = spidev_release;
354 spi->cs_gpio = -ENOENT;
355 device_initialize(&spi->dev);
358 EXPORT_SYMBOL_GPL(spi_alloc_device);
360 static void spi_dev_set_name(struct spi_device *spi)
362 struct acpi_device *adev = ACPI_COMPANION(&spi->dev);
365 dev_set_name(&spi->dev, "spi-%s", acpi_dev_name(adev));
369 dev_set_name(&spi->dev, "%s.%u", dev_name(&spi->master->dev),
373 static int spi_dev_check(struct device *dev, void *data)
375 struct spi_device *spi = to_spi_device(dev);
376 struct spi_device *new_spi = data;
378 if (spi->master == new_spi->master &&
379 spi->chip_select == new_spi->chip_select)
385 * spi_add_device - Add spi_device allocated with spi_alloc_device
386 * @spi: spi_device to register
388 * Companion function to spi_alloc_device. Devices allocated with
389 * spi_alloc_device can be added onto the spi bus with this function.
391 * Returns 0 on success; negative errno on failure
393 int spi_add_device(struct spi_device *spi)
395 static DEFINE_MUTEX(spi_add_lock);
396 struct spi_master *master = spi->master;
397 struct device *dev = master->dev.parent;
400 /* Chipselects are numbered 0..max; validate. */
401 if (spi->chip_select >= master->num_chipselect) {
402 dev_err(dev, "cs%d >= max %d\n",
404 master->num_chipselect);
408 /* Set the bus ID string */
409 spi_dev_set_name(spi);
411 /* We need to make sure there's no other device with this
412 * chipselect **BEFORE** we call setup(), else we'll trash
413 * its configuration. Lock against concurrent add() calls.
415 mutex_lock(&spi_add_lock);
417 status = bus_for_each_dev(&spi_bus_type, NULL, spi, spi_dev_check);
419 dev_err(dev, "chipselect %d already in use\n",
424 if (master->cs_gpios)
425 spi->cs_gpio = master->cs_gpios[spi->chip_select];
427 /* Drivers may modify this initial i/o setup, but will
428 * normally rely on the device being setup. Devices
429 * using SPI_CS_HIGH can't coexist well otherwise...
431 status = spi_setup(spi);
433 dev_err(dev, "can't setup %s, status %d\n",
434 dev_name(&spi->dev), status);
438 /* Device may be bound to an active driver when this returns */
439 status = device_add(&spi->dev);
441 dev_err(dev, "can't add %s, status %d\n",
442 dev_name(&spi->dev), status);
444 dev_dbg(dev, "registered child %s\n", dev_name(&spi->dev));
447 mutex_unlock(&spi_add_lock);
450 EXPORT_SYMBOL_GPL(spi_add_device);
453 * spi_new_device - instantiate one new SPI device
454 * @master: Controller to which device is connected
455 * @chip: Describes the SPI device
458 * On typical mainboards, this is purely internal; and it's not needed
459 * after board init creates the hard-wired devices. Some development
460 * platforms may not be able to use spi_register_board_info though, and
461 * this is exported so that for example a USB or parport based adapter
462 * driver could add devices (which it would learn about out-of-band).
464 * Returns the new device, or NULL.
466 struct spi_device *spi_new_device(struct spi_master *master,
467 struct spi_board_info *chip)
469 struct spi_device *proxy;
472 /* NOTE: caller did any chip->bus_num checks necessary.
474 * Also, unless we change the return value convention to use
475 * error-or-pointer (not NULL-or-pointer), troubleshootability
476 * suggests syslogged diagnostics are best here (ugh).
479 proxy = spi_alloc_device(master);
483 WARN_ON(strlen(chip->modalias) >= sizeof(proxy->modalias));
485 proxy->chip_select = chip->chip_select;
486 proxy->max_speed_hz = chip->max_speed_hz;
487 proxy->mode = chip->mode;
488 proxy->irq = chip->irq;
489 strlcpy(proxy->modalias, chip->modalias, sizeof(proxy->modalias));
490 proxy->dev.platform_data = (void *) chip->platform_data;
491 proxy->controller_data = chip->controller_data;
492 proxy->controller_state = NULL;
494 status = spi_add_device(proxy);
502 EXPORT_SYMBOL_GPL(spi_new_device);
504 static void spi_match_master_to_boardinfo(struct spi_master *master,
505 struct spi_board_info *bi)
507 struct spi_device *dev;
509 if (master->bus_num != bi->bus_num)
512 dev = spi_new_device(master, bi);
514 dev_err(master->dev.parent, "can't create new device for %s\n",
519 * spi_register_board_info - register SPI devices for a given board
520 * @info: array of chip descriptors
521 * @n: how many descriptors are provided
524 * Board-specific early init code calls this (probably during arch_initcall)
525 * with segments of the SPI device table. Any device nodes are created later,
526 * after the relevant parent SPI controller (bus_num) is defined. We keep
527 * this table of devices forever, so that reloading a controller driver will
528 * not make Linux forget about these hard-wired devices.
530 * Other code can also call this, e.g. a particular add-on board might provide
531 * SPI devices through its expansion connector, so code initializing that board
532 * would naturally declare its SPI devices.
534 * The board info passed can safely be __initdata ... but be careful of
535 * any embedded pointers (platform_data, etc), they're copied as-is.
537 int spi_register_board_info(struct spi_board_info const *info, unsigned n)
539 struct boardinfo *bi;
542 bi = kzalloc(n * sizeof(*bi), GFP_KERNEL);
546 for (i = 0; i < n; i++, bi++, info++) {
547 struct spi_master *master;
549 memcpy(&bi->board_info, info, sizeof(*info));
550 mutex_lock(&board_lock);
551 list_add_tail(&bi->list, &board_list);
552 list_for_each_entry(master, &spi_master_list, list)
553 spi_match_master_to_boardinfo(master, &bi->board_info);
554 mutex_unlock(&board_lock);
560 /*-------------------------------------------------------------------------*/
562 static void spi_set_cs(struct spi_device *spi, bool enable)
564 if (spi->mode & SPI_CS_HIGH)
567 if (spi->cs_gpio >= 0)
568 gpio_set_value(spi->cs_gpio, !enable);
569 else if (spi->master->set_cs)
570 spi->master->set_cs(spi, !enable);
574 * spi_transfer_one_message - Default implementation of transfer_one_message()
576 * This is a standard implementation of transfer_one_message() for
577 * drivers which impelment a transfer_one() operation. It provides
578 * standard handling of delays and chip select management.
580 static int spi_transfer_one_message(struct spi_master *master,
581 struct spi_message *msg)
583 struct spi_transfer *xfer;
585 bool keep_cs = false;
588 spi_set_cs(msg->spi, true);
590 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
591 trace_spi_transfer_start(msg, xfer);
593 reinit_completion(&master->xfer_completion);
595 ret = master->transfer_one(master, msg->spi, xfer);
597 dev_err(&msg->spi->dev,
598 "SPI transfer failed: %d\n", ret);
604 wait_for_completion(&master->xfer_completion);
607 trace_spi_transfer_stop(msg, xfer);
609 if (msg->status != -EINPROGRESS)
612 if (xfer->delay_usecs)
613 udelay(xfer->delay_usecs);
615 if (xfer->cs_change) {
616 if (list_is_last(&xfer->transfer_list,
621 spi_set_cs(msg->spi, cur_cs);
625 msg->actual_length += xfer->len;
629 if (ret != 0 || !keep_cs)
630 spi_set_cs(msg->spi, false);
632 if (msg->status == -EINPROGRESS)
635 spi_finalize_current_message(master);
641 * spi_finalize_current_transfer - report completion of a transfer
643 * Called by SPI drivers using the core transfer_one_message()
644 * implementation to notify it that the current interrupt driven
645 * transfer has finished and the next one may be scheduled.
647 void spi_finalize_current_transfer(struct spi_master *master)
649 complete(&master->xfer_completion);
651 EXPORT_SYMBOL_GPL(spi_finalize_current_transfer);
654 * spi_pump_messages - kthread work function which processes spi message queue
655 * @work: pointer to kthread work struct contained in the master struct
657 * This function checks if there is any spi message in the queue that
658 * needs processing and if so call out to the driver to initialize hardware
659 * and transfer each message.
662 static void spi_pump_messages(struct kthread_work *work)
664 struct spi_master *master =
665 container_of(work, struct spi_master, pump_messages);
667 bool was_busy = false;
670 /* Lock queue and check for queue work */
671 spin_lock_irqsave(&master->queue_lock, flags);
672 if (list_empty(&master->queue) || !master->running) {
674 spin_unlock_irqrestore(&master->queue_lock, flags);
677 master->busy = false;
678 spin_unlock_irqrestore(&master->queue_lock, flags);
679 if (master->unprepare_transfer_hardware &&
680 master->unprepare_transfer_hardware(master))
681 dev_err(&master->dev,
682 "failed to unprepare transfer hardware\n");
683 if (master->auto_runtime_pm) {
684 pm_runtime_mark_last_busy(master->dev.parent);
685 pm_runtime_put_autosuspend(master->dev.parent);
687 trace_spi_master_idle(master);
691 /* Make sure we are not already running a message */
692 if (master->cur_msg) {
693 spin_unlock_irqrestore(&master->queue_lock, flags);
696 /* Extract head of queue */
698 list_entry(master->queue.next, struct spi_message, queue);
700 list_del_init(&master->cur_msg->queue);
705 spin_unlock_irqrestore(&master->queue_lock, flags);
707 if (!was_busy && master->auto_runtime_pm) {
708 ret = pm_runtime_get_sync(master->dev.parent);
710 dev_err(&master->dev, "Failed to power device: %d\n",
717 trace_spi_master_busy(master);
719 if (!was_busy && master->prepare_transfer_hardware) {
720 ret = master->prepare_transfer_hardware(master);
722 dev_err(&master->dev,
723 "failed to prepare transfer hardware\n");
725 if (master->auto_runtime_pm)
726 pm_runtime_put(master->dev.parent);
731 trace_spi_message_start(master->cur_msg);
733 if (master->prepare_message) {
734 ret = master->prepare_message(master, master->cur_msg);
736 dev_err(&master->dev,
737 "failed to prepare message: %d\n", ret);
738 master->cur_msg->status = ret;
739 spi_finalize_current_message(master);
742 master->cur_msg_prepared = true;
745 ret = master->transfer_one_message(master, master->cur_msg);
747 dev_err(&master->dev,
748 "failed to transfer one message from queue: %d\n", ret);
749 master->cur_msg->status = ret;
750 spi_finalize_current_message(master);
755 static int spi_init_queue(struct spi_master *master)
757 struct sched_param param = { .sched_priority = MAX_RT_PRIO - 1 };
759 INIT_LIST_HEAD(&master->queue);
760 spin_lock_init(&master->queue_lock);
762 master->running = false;
763 master->busy = false;
765 init_kthread_worker(&master->kworker);
766 master->kworker_task = kthread_run(kthread_worker_fn,
767 &master->kworker, "%s",
768 dev_name(&master->dev));
769 if (IS_ERR(master->kworker_task)) {
770 dev_err(&master->dev, "failed to create message pump task\n");
773 init_kthread_work(&master->pump_messages, spi_pump_messages);
776 * Master config will indicate if this controller should run the
777 * message pump with high (realtime) priority to reduce the transfer
778 * latency on the bus by minimising the delay between a transfer
779 * request and the scheduling of the message pump thread. Without this
780 * setting the message pump thread will remain at default priority.
783 dev_info(&master->dev,
784 "will run message pump with realtime priority\n");
785 sched_setscheduler(master->kworker_task, SCHED_FIFO, ¶m);
792 * spi_get_next_queued_message() - called by driver to check for queued
794 * @master: the master to check for queued messages
796 * If there are more messages in the queue, the next message is returned from
799 struct spi_message *spi_get_next_queued_message(struct spi_master *master)
801 struct spi_message *next;
804 /* get a pointer to the next message, if any */
805 spin_lock_irqsave(&master->queue_lock, flags);
806 if (list_empty(&master->queue))
809 next = list_entry(master->queue.next,
810 struct spi_message, queue);
811 spin_unlock_irqrestore(&master->queue_lock, flags);
815 EXPORT_SYMBOL_GPL(spi_get_next_queued_message);
818 * spi_finalize_current_message() - the current message is complete
819 * @master: the master to return the message to
821 * Called by the driver to notify the core that the message in the front of the
822 * queue is complete and can be removed from the queue.
824 void spi_finalize_current_message(struct spi_master *master)
826 struct spi_message *mesg;
830 spin_lock_irqsave(&master->queue_lock, flags);
831 mesg = master->cur_msg;
832 master->cur_msg = NULL;
834 queue_kthread_work(&master->kworker, &master->pump_messages);
835 spin_unlock_irqrestore(&master->queue_lock, flags);
837 if (master->cur_msg_prepared && master->unprepare_message) {
838 ret = master->unprepare_message(master, mesg);
840 dev_err(&master->dev,
841 "failed to unprepare message: %d\n", ret);
844 master->cur_msg_prepared = false;
848 mesg->complete(mesg->context);
850 trace_spi_message_done(mesg);
852 EXPORT_SYMBOL_GPL(spi_finalize_current_message);
854 static int spi_start_queue(struct spi_master *master)
858 spin_lock_irqsave(&master->queue_lock, flags);
860 if (master->running || master->busy) {
861 spin_unlock_irqrestore(&master->queue_lock, flags);
865 master->running = true;
866 master->cur_msg = NULL;
867 spin_unlock_irqrestore(&master->queue_lock, flags);
869 queue_kthread_work(&master->kworker, &master->pump_messages);
874 static int spi_stop_queue(struct spi_master *master)
877 unsigned limit = 500;
880 spin_lock_irqsave(&master->queue_lock, flags);
883 * This is a bit lame, but is optimized for the common execution path.
884 * A wait_queue on the master->busy could be used, but then the common
885 * execution path (pump_messages) would be required to call wake_up or
886 * friends on every SPI message. Do this instead.
888 while ((!list_empty(&master->queue) || master->busy) && limit--) {
889 spin_unlock_irqrestore(&master->queue_lock, flags);
891 spin_lock_irqsave(&master->queue_lock, flags);
894 if (!list_empty(&master->queue) || master->busy)
897 master->running = false;
899 spin_unlock_irqrestore(&master->queue_lock, flags);
902 dev_warn(&master->dev,
903 "could not stop message queue\n");
909 static int spi_destroy_queue(struct spi_master *master)
913 ret = spi_stop_queue(master);
916 * flush_kthread_worker will block until all work is done.
917 * If the reason that stop_queue timed out is that the work will never
918 * finish, then it does no good to call flush/stop thread, so
922 dev_err(&master->dev, "problem destroying queue\n");
926 flush_kthread_worker(&master->kworker);
927 kthread_stop(master->kworker_task);
933 * spi_queued_transfer - transfer function for queued transfers
934 * @spi: spi device which is requesting transfer
935 * @msg: spi message which is to handled is queued to driver queue
937 static int spi_queued_transfer(struct spi_device *spi, struct spi_message *msg)
939 struct spi_master *master = spi->master;
942 spin_lock_irqsave(&master->queue_lock, flags);
944 if (!master->running) {
945 spin_unlock_irqrestore(&master->queue_lock, flags);
948 msg->actual_length = 0;
949 msg->status = -EINPROGRESS;
951 list_add_tail(&msg->queue, &master->queue);
953 queue_kthread_work(&master->kworker, &master->pump_messages);
955 spin_unlock_irqrestore(&master->queue_lock, flags);
959 static int spi_master_initialize_queue(struct spi_master *master)
963 master->queued = true;
964 master->transfer = spi_queued_transfer;
965 if (!master->transfer_one_message)
966 master->transfer_one_message = spi_transfer_one_message;
968 /* Initialize and start queue */
969 ret = spi_init_queue(master);
971 dev_err(&master->dev, "problem initializing queue\n");
974 ret = spi_start_queue(master);
976 dev_err(&master->dev, "problem starting queue\n");
977 goto err_start_queue;
984 spi_destroy_queue(master);
988 /*-------------------------------------------------------------------------*/
990 #if defined(CONFIG_OF)
992 * of_register_spi_devices() - Register child devices onto the SPI bus
993 * @master: Pointer to spi_master device
995 * Registers an spi_device for each child node of master node which has a 'reg'
998 static void of_register_spi_devices(struct spi_master *master)
1000 struct spi_device *spi;
1001 struct device_node *nc;
1005 if (!master->dev.of_node)
1008 for_each_available_child_of_node(master->dev.of_node, nc) {
1009 /* Alloc an spi_device */
1010 spi = spi_alloc_device(master);
1012 dev_err(&master->dev, "spi_device alloc error for %s\n",
1018 /* Select device driver */
1019 if (of_modalias_node(nc, spi->modalias,
1020 sizeof(spi->modalias)) < 0) {
1021 dev_err(&master->dev, "cannot find modalias for %s\n",
1027 /* Device address */
1028 rc = of_property_read_u32(nc, "reg", &value);
1030 dev_err(&master->dev, "%s has no valid 'reg' property (%d)\n",
1035 spi->chip_select = value;
1037 /* Mode (clock phase/polarity/etc.) */
1038 if (of_find_property(nc, "spi-cpha", NULL))
1039 spi->mode |= SPI_CPHA;
1040 if (of_find_property(nc, "spi-cpol", NULL))
1041 spi->mode |= SPI_CPOL;
1042 if (of_find_property(nc, "spi-cs-high", NULL))
1043 spi->mode |= SPI_CS_HIGH;
1044 if (of_find_property(nc, "spi-3wire", NULL))
1045 spi->mode |= SPI_3WIRE;
1047 /* Device DUAL/QUAD mode */
1048 if (!of_property_read_u32(nc, "spi-tx-bus-width", &value)) {
1053 spi->mode |= SPI_TX_DUAL;
1056 spi->mode |= SPI_TX_QUAD;
1059 dev_err(&master->dev,
1060 "spi-tx-bus-width %d not supported\n",
1067 if (!of_property_read_u32(nc, "spi-rx-bus-width", &value)) {
1072 spi->mode |= SPI_RX_DUAL;
1075 spi->mode |= SPI_RX_QUAD;
1078 dev_err(&master->dev,
1079 "spi-rx-bus-width %d not supported\n",
1087 rc = of_property_read_u32(nc, "spi-max-frequency", &value);
1089 dev_err(&master->dev, "%s has no valid 'spi-max-frequency' property (%d)\n",
1094 spi->max_speed_hz = value;
1097 spi->irq = irq_of_parse_and_map(nc, 0);
1099 /* Store a pointer to the node in the device structure */
1101 spi->dev.of_node = nc;
1103 /* Register the new device */
1104 request_module("%s%s", SPI_MODULE_PREFIX, spi->modalias);
1105 rc = spi_add_device(spi);
1107 dev_err(&master->dev, "spi_device register error %s\n",
1115 static void of_register_spi_devices(struct spi_master *master) { }
1119 static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
1121 struct spi_device *spi = data;
1123 if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
1124 struct acpi_resource_spi_serialbus *sb;
1126 sb = &ares->data.spi_serial_bus;
1127 if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_SPI) {
1128 spi->chip_select = sb->device_selection;
1129 spi->max_speed_hz = sb->connection_speed;
1131 if (sb->clock_phase == ACPI_SPI_SECOND_PHASE)
1132 spi->mode |= SPI_CPHA;
1133 if (sb->clock_polarity == ACPI_SPI_START_HIGH)
1134 spi->mode |= SPI_CPOL;
1135 if (sb->device_polarity == ACPI_SPI_ACTIVE_HIGH)
1136 spi->mode |= SPI_CS_HIGH;
1138 } else if (spi->irq < 0) {
1141 if (acpi_dev_resource_interrupt(ares, 0, &r))
1145 /* Always tell the ACPI core to skip this resource */
1149 static acpi_status acpi_spi_add_device(acpi_handle handle, u32 level,
1150 void *data, void **return_value)
1152 struct spi_master *master = data;
1153 struct list_head resource_list;
1154 struct acpi_device *adev;
1155 struct spi_device *spi;
1158 if (acpi_bus_get_device(handle, &adev))
1160 if (acpi_bus_get_status(adev) || !adev->status.present)
1163 spi = spi_alloc_device(master);
1165 dev_err(&master->dev, "failed to allocate SPI device for %s\n",
1166 dev_name(&adev->dev));
1167 return AE_NO_MEMORY;
1170 ACPI_COMPANION_SET(&spi->dev, adev);
1173 INIT_LIST_HEAD(&resource_list);
1174 ret = acpi_dev_get_resources(adev, &resource_list,
1175 acpi_spi_add_resource, spi);
1176 acpi_dev_free_resource_list(&resource_list);
1178 if (ret < 0 || !spi->max_speed_hz) {
1183 adev->power.flags.ignore_parent = true;
1184 strlcpy(spi->modalias, acpi_device_hid(adev), sizeof(spi->modalias));
1185 if (spi_add_device(spi)) {
1186 adev->power.flags.ignore_parent = false;
1187 dev_err(&master->dev, "failed to add SPI device %s from ACPI\n",
1188 dev_name(&adev->dev));
1195 static void acpi_register_spi_devices(struct spi_master *master)
1200 handle = ACPI_HANDLE(master->dev.parent);
1204 status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
1205 acpi_spi_add_device, NULL,
1207 if (ACPI_FAILURE(status))
1208 dev_warn(&master->dev, "failed to enumerate SPI slaves\n");
1211 static inline void acpi_register_spi_devices(struct spi_master *master) {}
1212 #endif /* CONFIG_ACPI */
1214 static void spi_master_release(struct device *dev)
1216 struct spi_master *master;
1218 master = container_of(dev, struct spi_master, dev);
1222 static struct class spi_master_class = {
1223 .name = "spi_master",
1224 .owner = THIS_MODULE,
1225 .dev_release = spi_master_release,
1231 * spi_alloc_master - allocate SPI master controller
1232 * @dev: the controller, possibly using the platform_bus
1233 * @size: how much zeroed driver-private data to allocate; the pointer to this
1234 * memory is in the driver_data field of the returned device,
1235 * accessible with spi_master_get_devdata().
1236 * Context: can sleep
1238 * This call is used only by SPI master controller drivers, which are the
1239 * only ones directly touching chip registers. It's how they allocate
1240 * an spi_master structure, prior to calling spi_register_master().
1242 * This must be called from context that can sleep. It returns the SPI
1243 * master structure on success, else NULL.
1245 * The caller is responsible for assigning the bus number and initializing
1246 * the master's methods before calling spi_register_master(); and (after errors
1247 * adding the device) calling spi_master_put() and kfree() to prevent a memory
1250 struct spi_master *spi_alloc_master(struct device *dev, unsigned size)
1252 struct spi_master *master;
1257 master = kzalloc(size + sizeof(*master), GFP_KERNEL);
1261 device_initialize(&master->dev);
1262 master->bus_num = -1;
1263 master->num_chipselect = 1;
1264 master->dev.class = &spi_master_class;
1265 master->dev.parent = get_device(dev);
1266 spi_master_set_devdata(master, &master[1]);
1270 EXPORT_SYMBOL_GPL(spi_alloc_master);
1273 static int of_spi_register_master(struct spi_master *master)
1276 struct device_node *np = master->dev.of_node;
1281 nb = of_gpio_named_count(np, "cs-gpios");
1282 master->num_chipselect = max_t(int, nb, master->num_chipselect);
1284 /* Return error only for an incorrectly formed cs-gpios property */
1285 if (nb == 0 || nb == -ENOENT)
1290 cs = devm_kzalloc(&master->dev,
1291 sizeof(int) * master->num_chipselect,
1293 master->cs_gpios = cs;
1295 if (!master->cs_gpios)
1298 for (i = 0; i < master->num_chipselect; i++)
1301 for (i = 0; i < nb; i++)
1302 cs[i] = of_get_named_gpio(np, "cs-gpios", i);
1307 static int of_spi_register_master(struct spi_master *master)
1314 * spi_register_master - register SPI master controller
1315 * @master: initialized master, originally from spi_alloc_master()
1316 * Context: can sleep
1318 * SPI master controllers connect to their drivers using some non-SPI bus,
1319 * such as the platform bus. The final stage of probe() in that code
1320 * includes calling spi_register_master() to hook up to this SPI bus glue.
1322 * SPI controllers use board specific (often SOC specific) bus numbers,
1323 * and board-specific addressing for SPI devices combines those numbers
1324 * with chip select numbers. Since SPI does not directly support dynamic
1325 * device identification, boards need configuration tables telling which
1326 * chip is at which address.
1328 * This must be called from context that can sleep. It returns zero on
1329 * success, else a negative error code (dropping the master's refcount).
1330 * After a successful return, the caller is responsible for calling
1331 * spi_unregister_master().
1333 int spi_register_master(struct spi_master *master)
1335 static atomic_t dyn_bus_id = ATOMIC_INIT((1<<15) - 1);
1336 struct device *dev = master->dev.parent;
1337 struct boardinfo *bi;
1338 int status = -ENODEV;
1344 status = of_spi_register_master(master);
1348 /* even if it's just one always-selected device, there must
1349 * be at least one chipselect
1351 if (master->num_chipselect == 0)
1354 if ((master->bus_num < 0) && master->dev.of_node)
1355 master->bus_num = of_alias_get_id(master->dev.of_node, "spi");
1357 /* convention: dynamically assigned bus IDs count down from the max */
1358 if (master->bus_num < 0) {
1359 /* FIXME switch to an IDR based scheme, something like
1360 * I2C now uses, so we can't run out of "dynamic" IDs
1362 master->bus_num = atomic_dec_return(&dyn_bus_id);
1366 spin_lock_init(&master->bus_lock_spinlock);
1367 mutex_init(&master->bus_lock_mutex);
1368 master->bus_lock_flag = 0;
1369 init_completion(&master->xfer_completion);
1371 /* register the device, then userspace will see it.
1372 * registration fails if the bus ID is in use.
1374 dev_set_name(&master->dev, "spi%u", master->bus_num);
1375 status = device_add(&master->dev);
1378 dev_dbg(dev, "registered master %s%s\n", dev_name(&master->dev),
1379 dynamic ? " (dynamic)" : "");
1381 /* If we're using a queued driver, start the queue */
1382 if (master->transfer)
1383 dev_info(dev, "master is unqueued, this is deprecated\n");
1385 status = spi_master_initialize_queue(master);
1387 device_del(&master->dev);
1392 mutex_lock(&board_lock);
1393 list_add_tail(&master->list, &spi_master_list);
1394 list_for_each_entry(bi, &board_list, list)
1395 spi_match_master_to_boardinfo(master, &bi->board_info);
1396 mutex_unlock(&board_lock);
1398 /* Register devices from the device tree and ACPI */
1399 of_register_spi_devices(master);
1400 acpi_register_spi_devices(master);
1404 EXPORT_SYMBOL_GPL(spi_register_master);
1406 static void devm_spi_unregister(struct device *dev, void *res)
1408 spi_unregister_master(*(struct spi_master **)res);
1412 * dev_spi_register_master - register managed SPI master controller
1413 * @dev: device managing SPI master
1414 * @master: initialized master, originally from spi_alloc_master()
1415 * Context: can sleep
1417 * Register a SPI device as with spi_register_master() which will
1418 * automatically be unregister
1420 int devm_spi_register_master(struct device *dev, struct spi_master *master)
1422 struct spi_master **ptr;
1425 ptr = devres_alloc(devm_spi_unregister, sizeof(*ptr), GFP_KERNEL);
1429 ret = spi_register_master(master);
1432 devres_add(dev, ptr);
1439 EXPORT_SYMBOL_GPL(devm_spi_register_master);
1441 static int __unregister(struct device *dev, void *null)
1443 spi_unregister_device(to_spi_device(dev));
1448 * spi_unregister_master - unregister SPI master controller
1449 * @master: the master being unregistered
1450 * Context: can sleep
1452 * This call is used only by SPI master controller drivers, which are the
1453 * only ones directly touching chip registers.
1455 * This must be called from context that can sleep.
1457 void spi_unregister_master(struct spi_master *master)
1461 if (master->queued) {
1462 if (spi_destroy_queue(master))
1463 dev_err(&master->dev, "queue remove failed\n");
1466 mutex_lock(&board_lock);
1467 list_del(&master->list);
1468 mutex_unlock(&board_lock);
1470 dummy = device_for_each_child(&master->dev, NULL, __unregister);
1471 device_unregister(&master->dev);
1473 EXPORT_SYMBOL_GPL(spi_unregister_master);
1475 int spi_master_suspend(struct spi_master *master)
1479 /* Basically no-ops for non-queued masters */
1480 if (!master->queued)
1483 ret = spi_stop_queue(master);
1485 dev_err(&master->dev, "queue stop failed\n");
1489 EXPORT_SYMBOL_GPL(spi_master_suspend);
1491 int spi_master_resume(struct spi_master *master)
1495 if (!master->queued)
1498 ret = spi_start_queue(master);
1500 dev_err(&master->dev, "queue restart failed\n");
1504 EXPORT_SYMBOL_GPL(spi_master_resume);
1506 static int __spi_master_match(struct device *dev, const void *data)
1508 struct spi_master *m;
1509 const u16 *bus_num = data;
1511 m = container_of(dev, struct spi_master, dev);
1512 return m->bus_num == *bus_num;
1516 * spi_busnum_to_master - look up master associated with bus_num
1517 * @bus_num: the master's bus number
1518 * Context: can sleep
1520 * This call may be used with devices that are registered after
1521 * arch init time. It returns a refcounted pointer to the relevant
1522 * spi_master (which the caller must release), or NULL if there is
1523 * no such master registered.
1525 struct spi_master *spi_busnum_to_master(u16 bus_num)
1528 struct spi_master *master = NULL;
1530 dev = class_find_device(&spi_master_class, NULL, &bus_num,
1531 __spi_master_match);
1533 master = container_of(dev, struct spi_master, dev);
1534 /* reference got in class_find_device */
1537 EXPORT_SYMBOL_GPL(spi_busnum_to_master);
1540 /*-------------------------------------------------------------------------*/
1542 /* Core methods for SPI master protocol drivers. Some of the
1543 * other core methods are currently defined as inline functions.
1547 * spi_setup - setup SPI mode and clock rate
1548 * @spi: the device whose settings are being modified
1549 * Context: can sleep, and no requests are queued to the device
1551 * SPI protocol drivers may need to update the transfer mode if the
1552 * device doesn't work with its default. They may likewise need
1553 * to update clock rates or word sizes from initial values. This function
1554 * changes those settings, and must be called from a context that can sleep.
1555 * Except for SPI_CS_HIGH, which takes effect immediately, the changes take
1556 * effect the next time the device is selected and data is transferred to
1557 * or from it. When this function returns, the spi device is deselected.
1559 * Note that this call will fail if the protocol driver specifies an option
1560 * that the underlying controller or its driver does not support. For
1561 * example, not all hardware supports wire transfers using nine bit words,
1562 * LSB-first wire encoding, or active-high chipselects.
1564 int spi_setup(struct spi_device *spi)
1569 /* check mode to prevent that DUAL and QUAD set at the same time
1571 if (((spi->mode & SPI_TX_DUAL) && (spi->mode & SPI_TX_QUAD)) ||
1572 ((spi->mode & SPI_RX_DUAL) && (spi->mode & SPI_RX_QUAD))) {
1574 "setup: can not select dual and quad at the same time\n");
1577 /* if it is SPI_3WIRE mode, DUAL and QUAD should be forbidden
1579 if ((spi->mode & SPI_3WIRE) && (spi->mode &
1580 (SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD)))
1582 /* help drivers fail *cleanly* when they need options
1583 * that aren't supported with their current master
1585 bad_bits = spi->mode & ~spi->master->mode_bits;
1587 dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
1592 if (!spi->bits_per_word)
1593 spi->bits_per_word = 8;
1595 if (spi->master->setup)
1596 status = spi->master->setup(spi);
1598 dev_dbg(&spi->dev, "setup mode %d, %s%s%s%s%u bits/w, %u Hz max --> %d\n",
1599 (int) (spi->mode & (SPI_CPOL | SPI_CPHA)),
1600 (spi->mode & SPI_CS_HIGH) ? "cs_high, " : "",
1601 (spi->mode & SPI_LSB_FIRST) ? "lsb, " : "",
1602 (spi->mode & SPI_3WIRE) ? "3wire, " : "",
1603 (spi->mode & SPI_LOOP) ? "loopback, " : "",
1604 spi->bits_per_word, spi->max_speed_hz,
1609 EXPORT_SYMBOL_GPL(spi_setup);
1611 static int __spi_async(struct spi_device *spi, struct spi_message *message)
1613 struct spi_master *master = spi->master;
1614 struct spi_transfer *xfer;
1618 trace_spi_message_submit(message);
1620 if (list_empty(&message->transfers))
1622 if (!message->complete)
1625 /* Half-duplex links include original MicroWire, and ones with
1626 * only one data pin like SPI_3WIRE (switches direction) or where
1627 * either MOSI or MISO is missing. They can also be caused by
1628 * software limitations.
1630 if ((master->flags & SPI_MASTER_HALF_DUPLEX)
1631 || (spi->mode & SPI_3WIRE)) {
1632 unsigned flags = master->flags;
1634 list_for_each_entry(xfer, &message->transfers, transfer_list) {
1635 if (xfer->rx_buf && xfer->tx_buf)
1637 if ((flags & SPI_MASTER_NO_TX) && xfer->tx_buf)
1639 if ((flags & SPI_MASTER_NO_RX) && xfer->rx_buf)
1645 * Set transfer bits_per_word and max speed as spi device default if
1646 * it is not set for this transfer.
1647 * Set transfer tx_nbits and rx_nbits as single transfer default
1648 * (SPI_NBITS_SINGLE) if it is not set for this transfer.
1650 list_for_each_entry(xfer, &message->transfers, transfer_list) {
1651 message->frame_length += xfer->len;
1652 if (!xfer->bits_per_word)
1653 xfer->bits_per_word = spi->bits_per_word;
1654 if (!xfer->speed_hz) {
1655 xfer->speed_hz = spi->max_speed_hz;
1656 if (master->max_speed_hz &&
1657 xfer->speed_hz > master->max_speed_hz)
1658 xfer->speed_hz = master->max_speed_hz;
1661 if (master->bits_per_word_mask) {
1662 /* Only 32 bits fit in the mask */
1663 if (xfer->bits_per_word > 32)
1665 if (!(master->bits_per_word_mask &
1666 BIT(xfer->bits_per_word - 1)))
1670 if (xfer->speed_hz && master->min_speed_hz &&
1671 xfer->speed_hz < master->min_speed_hz)
1673 if (xfer->speed_hz && master->max_speed_hz &&
1674 xfer->speed_hz > master->max_speed_hz)
1677 if (xfer->tx_buf && !xfer->tx_nbits)
1678 xfer->tx_nbits = SPI_NBITS_SINGLE;
1679 if (xfer->rx_buf && !xfer->rx_nbits)
1680 xfer->rx_nbits = SPI_NBITS_SINGLE;
1681 /* check transfer tx/rx_nbits:
1682 * 1. keep the value is not out of single, dual and quad
1683 * 2. keep tx/rx_nbits is contained by mode in spi_device
1684 * 3. if SPI_3WIRE, tx/rx_nbits should be in single
1687 if (xfer->tx_nbits != SPI_NBITS_SINGLE &&
1688 xfer->tx_nbits != SPI_NBITS_DUAL &&
1689 xfer->tx_nbits != SPI_NBITS_QUAD)
1691 if ((xfer->tx_nbits == SPI_NBITS_DUAL) &&
1692 !(spi->mode & (SPI_TX_DUAL | SPI_TX_QUAD)))
1694 if ((xfer->tx_nbits == SPI_NBITS_QUAD) &&
1695 !(spi->mode & SPI_TX_QUAD))
1697 if ((spi->mode & SPI_3WIRE) &&
1698 (xfer->tx_nbits != SPI_NBITS_SINGLE))
1701 /* check transfer rx_nbits */
1703 if (xfer->rx_nbits != SPI_NBITS_SINGLE &&
1704 xfer->rx_nbits != SPI_NBITS_DUAL &&
1705 xfer->rx_nbits != SPI_NBITS_QUAD)
1707 if ((xfer->rx_nbits == SPI_NBITS_DUAL) &&
1708 !(spi->mode & (SPI_RX_DUAL | SPI_RX_QUAD)))
1710 if ((xfer->rx_nbits == SPI_NBITS_QUAD) &&
1711 !(spi->mode & SPI_RX_QUAD))
1713 if ((spi->mode & SPI_3WIRE) &&
1714 (xfer->rx_nbits != SPI_NBITS_SINGLE))
1719 message->status = -EINPROGRESS;
1720 return master->transfer(spi, message);
1724 * spi_async - asynchronous SPI transfer
1725 * @spi: device with which data will be exchanged
1726 * @message: describes the data transfers, including completion callback
1727 * Context: any (irqs may be blocked, etc)
1729 * This call may be used in_irq and other contexts which can't sleep,
1730 * as well as from task contexts which can sleep.
1732 * The completion callback is invoked in a context which can't sleep.
1733 * Before that invocation, the value of message->status is undefined.
1734 * When the callback is issued, message->status holds either zero (to
1735 * indicate complete success) or a negative error code. After that
1736 * callback returns, the driver which issued the transfer request may
1737 * deallocate the associated memory; it's no longer in use by any SPI
1738 * core or controller driver code.
1740 * Note that although all messages to a spi_device are handled in
1741 * FIFO order, messages may go to different devices in other orders.
1742 * Some device might be higher priority, or have various "hard" access
1743 * time requirements, for example.
1745 * On detection of any fault during the transfer, processing of
1746 * the entire message is aborted, and the device is deselected.
1747 * Until returning from the associated message completion callback,
1748 * no other spi_message queued to that device will be processed.
1749 * (This rule applies equally to all the synchronous transfer calls,
1750 * which are wrappers around this core asynchronous primitive.)
1752 int spi_async(struct spi_device *spi, struct spi_message *message)
1754 struct spi_master *master = spi->master;
1756 unsigned long flags;
1758 spin_lock_irqsave(&master->bus_lock_spinlock, flags);
1760 if (master->bus_lock_flag)
1763 ret = __spi_async(spi, message);
1765 spin_unlock_irqrestore(&master->bus_lock_spinlock, flags);
1769 EXPORT_SYMBOL_GPL(spi_async);
1772 * spi_async_locked - version of spi_async with exclusive bus usage
1773 * @spi: device with which data will be exchanged
1774 * @message: describes the data transfers, including completion callback
1775 * Context: any (irqs may be blocked, etc)
1777 * This call may be used in_irq and other contexts which can't sleep,
1778 * as well as from task contexts which can sleep.
1780 * The completion callback is invoked in a context which can't sleep.
1781 * Before that invocation, the value of message->status is undefined.
1782 * When the callback is issued, message->status holds either zero (to
1783 * indicate complete success) or a negative error code. After that
1784 * callback returns, the driver which issued the transfer request may
1785 * deallocate the associated memory; it's no longer in use by any SPI
1786 * core or controller driver code.
1788 * Note that although all messages to a spi_device are handled in
1789 * FIFO order, messages may go to different devices in other orders.
1790 * Some device might be higher priority, or have various "hard" access
1791 * time requirements, for example.
1793 * On detection of any fault during the transfer, processing of
1794 * the entire message is aborted, and the device is deselected.
1795 * Until returning from the associated message completion callback,
1796 * no other spi_message queued to that device will be processed.
1797 * (This rule applies equally to all the synchronous transfer calls,
1798 * which are wrappers around this core asynchronous primitive.)
1800 int spi_async_locked(struct spi_device *spi, struct spi_message *message)
1802 struct spi_master *master = spi->master;
1804 unsigned long flags;
1806 spin_lock_irqsave(&master->bus_lock_spinlock, flags);
1808 ret = __spi_async(spi, message);
1810 spin_unlock_irqrestore(&master->bus_lock_spinlock, flags);
1815 EXPORT_SYMBOL_GPL(spi_async_locked);
1818 /*-------------------------------------------------------------------------*/
1820 /* Utility methods for SPI master protocol drivers, layered on
1821 * top of the core. Some other utility methods are defined as
1825 static void spi_complete(void *arg)
1830 static int __spi_sync(struct spi_device *spi, struct spi_message *message,
1833 DECLARE_COMPLETION_ONSTACK(done);
1835 struct spi_master *master = spi->master;
1837 message->complete = spi_complete;
1838 message->context = &done;
1841 mutex_lock(&master->bus_lock_mutex);
1843 status = spi_async_locked(spi, message);
1846 mutex_unlock(&master->bus_lock_mutex);
1849 wait_for_completion(&done);
1850 status = message->status;
1852 message->context = NULL;
1857 * spi_sync - blocking/synchronous SPI data transfers
1858 * @spi: device with which data will be exchanged
1859 * @message: describes the data transfers
1860 * Context: can sleep
1862 * This call may only be used from a context that may sleep. The sleep
1863 * is non-interruptible, and has no timeout. Low-overhead controller
1864 * drivers may DMA directly into and out of the message buffers.
1866 * Note that the SPI device's chip select is active during the message,
1867 * and then is normally disabled between messages. Drivers for some
1868 * frequently-used devices may want to minimize costs of selecting a chip,
1869 * by leaving it selected in anticipation that the next message will go
1870 * to the same chip. (That may increase power usage.)
1872 * Also, the caller is guaranteeing that the memory associated with the
1873 * message will not be freed before this call returns.
1875 * It returns zero on success, else a negative error code.
1877 int spi_sync(struct spi_device *spi, struct spi_message *message)
1879 return __spi_sync(spi, message, 0);
1881 EXPORT_SYMBOL_GPL(spi_sync);
1884 * spi_sync_locked - version of spi_sync with exclusive bus usage
1885 * @spi: device with which data will be exchanged
1886 * @message: describes the data transfers
1887 * Context: can sleep
1889 * This call may only be used from a context that may sleep. The sleep
1890 * is non-interruptible, and has no timeout. Low-overhead controller
1891 * drivers may DMA directly into and out of the message buffers.
1893 * This call should be used by drivers that require exclusive access to the
1894 * SPI bus. It has to be preceded by a spi_bus_lock call. The SPI bus must
1895 * be released by a spi_bus_unlock call when the exclusive access is over.
1897 * It returns zero on success, else a negative error code.
1899 int spi_sync_locked(struct spi_device *spi, struct spi_message *message)
1901 return __spi_sync(spi, message, 1);
1903 EXPORT_SYMBOL_GPL(spi_sync_locked);
1906 * spi_bus_lock - obtain a lock for exclusive SPI bus usage
1907 * @master: SPI bus master that should be locked for exclusive bus access
1908 * Context: can sleep
1910 * This call may only be used from a context that may sleep. The sleep
1911 * is non-interruptible, and has no timeout.
1913 * This call should be used by drivers that require exclusive access to the
1914 * SPI bus. The SPI bus must be released by a spi_bus_unlock call when the
1915 * exclusive access is over. Data transfer must be done by spi_sync_locked
1916 * and spi_async_locked calls when the SPI bus lock is held.
1918 * It returns zero on success, else a negative error code.
1920 int spi_bus_lock(struct spi_master *master)
1922 unsigned long flags;
1924 mutex_lock(&master->bus_lock_mutex);
1926 spin_lock_irqsave(&master->bus_lock_spinlock, flags);
1927 master->bus_lock_flag = 1;
1928 spin_unlock_irqrestore(&master->bus_lock_spinlock, flags);
1930 /* mutex remains locked until spi_bus_unlock is called */
1934 EXPORT_SYMBOL_GPL(spi_bus_lock);
1937 * spi_bus_unlock - release the lock for exclusive SPI bus usage
1938 * @master: SPI bus master that was locked for exclusive bus access
1939 * Context: can sleep
1941 * This call may only be used from a context that may sleep. The sleep
1942 * is non-interruptible, and has no timeout.
1944 * This call releases an SPI bus lock previously obtained by an spi_bus_lock
1947 * It returns zero on success, else a negative error code.
1949 int spi_bus_unlock(struct spi_master *master)
1951 master->bus_lock_flag = 0;
1953 mutex_unlock(&master->bus_lock_mutex);
1957 EXPORT_SYMBOL_GPL(spi_bus_unlock);
1959 /* portable code must never pass more than 32 bytes */
1960 #define SPI_BUFSIZ max(32, SMP_CACHE_BYTES)
1965 * spi_write_then_read - SPI synchronous write followed by read
1966 * @spi: device with which data will be exchanged
1967 * @txbuf: data to be written (need not be dma-safe)
1968 * @n_tx: size of txbuf, in bytes
1969 * @rxbuf: buffer into which data will be read (need not be dma-safe)
1970 * @n_rx: size of rxbuf, in bytes
1971 * Context: can sleep
1973 * This performs a half duplex MicroWire style transaction with the
1974 * device, sending txbuf and then reading rxbuf. The return value
1975 * is zero for success, else a negative errno status code.
1976 * This call may only be used from a context that may sleep.
1978 * Parameters to this routine are always copied using a small buffer;
1979 * portable code should never use this for more than 32 bytes.
1980 * Performance-sensitive or bulk transfer code should instead use
1981 * spi_{async,sync}() calls with dma-safe buffers.
1983 int spi_write_then_read(struct spi_device *spi,
1984 const void *txbuf, unsigned n_tx,
1985 void *rxbuf, unsigned n_rx)
1987 static DEFINE_MUTEX(lock);
1990 struct spi_message message;
1991 struct spi_transfer x[2];
1994 /* Use preallocated DMA-safe buffer if we can. We can't avoid
1995 * copying here, (as a pure convenience thing), but we can
1996 * keep heap costs out of the hot path unless someone else is
1997 * using the pre-allocated buffer or the transfer is too large.
1999 if ((n_tx + n_rx) > SPI_BUFSIZ || !mutex_trylock(&lock)) {
2000 local_buf = kmalloc(max((unsigned)SPI_BUFSIZ, n_tx + n_rx),
2001 GFP_KERNEL | GFP_DMA);
2008 spi_message_init(&message);
2009 memset(x, 0, sizeof(x));
2012 spi_message_add_tail(&x[0], &message);
2016 spi_message_add_tail(&x[1], &message);
2019 memcpy(local_buf, txbuf, n_tx);
2020 x[0].tx_buf = local_buf;
2021 x[1].rx_buf = local_buf + n_tx;
2024 status = spi_sync(spi, &message);
2026 memcpy(rxbuf, x[1].rx_buf, n_rx);
2028 if (x[0].tx_buf == buf)
2029 mutex_unlock(&lock);
2035 EXPORT_SYMBOL_GPL(spi_write_then_read);
2037 /*-------------------------------------------------------------------------*/
2039 static int __init spi_init(void)
2043 buf = kmalloc(SPI_BUFSIZ, GFP_KERNEL);
2049 status = bus_register(&spi_bus_type);
2053 status = class_register(&spi_master_class);
2059 bus_unregister(&spi_bus_type);
2067 /* board_info is normally registered in arch_initcall(),
2068 * but even essential drivers wait till later
2070 * REVISIT only boardinfo really needs static linking. the rest (device and
2071 * driver registration) _could_ be dynamically linked (modular) ... costs
2072 * include needing to have boardinfo data structures be much more public.
2074 postcore_initcall(spi_init);