Merge remote-tracking branch 'mac80211/master' into HEAD
[platform/upstream/kernel-adaptation-pc.git] / drivers / spi / spi-s3c64xx.c
1 /*
2  * Copyright (C) 2009 Samsung Electronics Ltd.
3  *      Jaswinder Singh <jassi.brar@samsung.com>
4  *
5  * This program is free software; you can redistribute it and/or modify
6  * it under the terms of the GNU General Public License as published by
7  * the Free Software Foundation; either version 2 of the License, or
8  * (at your option) any later version.
9  *
10  * This program is distributed in the hope that it will be useful,
11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  * GNU General Public License for more details.
14  *
15  * You should have received a copy of the GNU General Public License
16  * along with this program; if not, write to the Free Software
17  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
18  */
19
20 #include <linux/init.h>
21 #include <linux/module.h>
22 #include <linux/workqueue.h>
23 #include <linux/interrupt.h>
24 #include <linux/delay.h>
25 #include <linux/clk.h>
26 #include <linux/dma-mapping.h>
27 #include <linux/platform_device.h>
28 #include <linux/pm_runtime.h>
29 #include <linux/spi/spi.h>
30 #include <linux/gpio.h>
31 #include <linux/of.h>
32 #include <linux/of_gpio.h>
33
34 #include <mach/dma.h>
35 #include <linux/platform_data/spi-s3c64xx.h>
36
37 #define MAX_SPI_PORTS           3
38
39 /* Registers and bit-fields */
40
41 #define S3C64XX_SPI_CH_CFG              0x00
42 #define S3C64XX_SPI_CLK_CFG             0x04
43 #define S3C64XX_SPI_MODE_CFG    0x08
44 #define S3C64XX_SPI_SLAVE_SEL   0x0C
45 #define S3C64XX_SPI_INT_EN              0x10
46 #define S3C64XX_SPI_STATUS              0x14
47 #define S3C64XX_SPI_TX_DATA             0x18
48 #define S3C64XX_SPI_RX_DATA             0x1C
49 #define S3C64XX_SPI_PACKET_CNT  0x20
50 #define S3C64XX_SPI_PENDING_CLR 0x24
51 #define S3C64XX_SPI_SWAP_CFG    0x28
52 #define S3C64XX_SPI_FB_CLK              0x2C
53
54 #define S3C64XX_SPI_CH_HS_EN            (1<<6)  /* High Speed Enable */
55 #define S3C64XX_SPI_CH_SW_RST           (1<<5)
56 #define S3C64XX_SPI_CH_SLAVE            (1<<4)
57 #define S3C64XX_SPI_CPOL_L              (1<<3)
58 #define S3C64XX_SPI_CPHA_B              (1<<2)
59 #define S3C64XX_SPI_CH_RXCH_ON          (1<<1)
60 #define S3C64XX_SPI_CH_TXCH_ON          (1<<0)
61
62 #define S3C64XX_SPI_CLKSEL_SRCMSK       (3<<9)
63 #define S3C64XX_SPI_CLKSEL_SRCSHFT      9
64 #define S3C64XX_SPI_ENCLK_ENABLE        (1<<8)
65 #define S3C64XX_SPI_PSR_MASK            0xff
66
67 #define S3C64XX_SPI_MODE_CH_TSZ_BYTE            (0<<29)
68 #define S3C64XX_SPI_MODE_CH_TSZ_HALFWORD        (1<<29)
69 #define S3C64XX_SPI_MODE_CH_TSZ_WORD            (2<<29)
70 #define S3C64XX_SPI_MODE_CH_TSZ_MASK            (3<<29)
71 #define S3C64XX_SPI_MODE_BUS_TSZ_BYTE           (0<<17)
72 #define S3C64XX_SPI_MODE_BUS_TSZ_HALFWORD       (1<<17)
73 #define S3C64XX_SPI_MODE_BUS_TSZ_WORD           (2<<17)
74 #define S3C64XX_SPI_MODE_BUS_TSZ_MASK           (3<<17)
75 #define S3C64XX_SPI_MODE_RXDMA_ON               (1<<2)
76 #define S3C64XX_SPI_MODE_TXDMA_ON               (1<<1)
77 #define S3C64XX_SPI_MODE_4BURST                 (1<<0)
78
79 #define S3C64XX_SPI_SLAVE_AUTO                  (1<<1)
80 #define S3C64XX_SPI_SLAVE_SIG_INACT             (1<<0)
81
82 #define S3C64XX_SPI_INT_TRAILING_EN             (1<<6)
83 #define S3C64XX_SPI_INT_RX_OVERRUN_EN           (1<<5)
84 #define S3C64XX_SPI_INT_RX_UNDERRUN_EN          (1<<4)
85 #define S3C64XX_SPI_INT_TX_OVERRUN_EN           (1<<3)
86 #define S3C64XX_SPI_INT_TX_UNDERRUN_EN          (1<<2)
87 #define S3C64XX_SPI_INT_RX_FIFORDY_EN           (1<<1)
88 #define S3C64XX_SPI_INT_TX_FIFORDY_EN           (1<<0)
89
90 #define S3C64XX_SPI_ST_RX_OVERRUN_ERR           (1<<5)
91 #define S3C64XX_SPI_ST_RX_UNDERRUN_ERR  (1<<4)
92 #define S3C64XX_SPI_ST_TX_OVERRUN_ERR           (1<<3)
93 #define S3C64XX_SPI_ST_TX_UNDERRUN_ERR  (1<<2)
94 #define S3C64XX_SPI_ST_RX_FIFORDY               (1<<1)
95 #define S3C64XX_SPI_ST_TX_FIFORDY               (1<<0)
96
97 #define S3C64XX_SPI_PACKET_CNT_EN               (1<<16)
98
99 #define S3C64XX_SPI_PND_TX_UNDERRUN_CLR         (1<<4)
100 #define S3C64XX_SPI_PND_TX_OVERRUN_CLR          (1<<3)
101 #define S3C64XX_SPI_PND_RX_UNDERRUN_CLR         (1<<2)
102 #define S3C64XX_SPI_PND_RX_OVERRUN_CLR          (1<<1)
103 #define S3C64XX_SPI_PND_TRAILING_CLR            (1<<0)
104
105 #define S3C64XX_SPI_SWAP_RX_HALF_WORD           (1<<7)
106 #define S3C64XX_SPI_SWAP_RX_BYTE                (1<<6)
107 #define S3C64XX_SPI_SWAP_RX_BIT                 (1<<5)
108 #define S3C64XX_SPI_SWAP_RX_EN                  (1<<4)
109 #define S3C64XX_SPI_SWAP_TX_HALF_WORD           (1<<3)
110 #define S3C64XX_SPI_SWAP_TX_BYTE                (1<<2)
111 #define S3C64XX_SPI_SWAP_TX_BIT                 (1<<1)
112 #define S3C64XX_SPI_SWAP_TX_EN                  (1<<0)
113
114 #define S3C64XX_SPI_FBCLK_MSK           (3<<0)
115
116 #define FIFO_LVL_MASK(i) ((i)->port_conf->fifo_lvl_mask[i->port_id])
117 #define S3C64XX_SPI_ST_TX_DONE(v, i) (((v) & \
118                                 (1 << (i)->port_conf->tx_st_done)) ? 1 : 0)
119 #define TX_FIFO_LVL(v, i) (((v) >> 6) & FIFO_LVL_MASK(i))
120 #define RX_FIFO_LVL(v, i) (((v) >> (i)->port_conf->rx_lvl_offset) & \
121                                         FIFO_LVL_MASK(i))
122
123 #define S3C64XX_SPI_MAX_TRAILCNT        0x3ff
124 #define S3C64XX_SPI_TRAILCNT_OFF        19
125
126 #define S3C64XX_SPI_TRAILCNT            S3C64XX_SPI_MAX_TRAILCNT
127
128 #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
129
130 #define RXBUSY    (1<<2)
131 #define TXBUSY    (1<<3)
132
133 struct s3c64xx_spi_dma_data {
134         unsigned                ch;
135         enum dma_transfer_direction direction;
136         enum dma_ch     dmach;
137 };
138
139 /**
140  * struct s3c64xx_spi_info - SPI Controller hardware info
141  * @fifo_lvl_mask: Bit-mask for {TX|RX}_FIFO_LVL bits in SPI_STATUS register.
142  * @rx_lvl_offset: Bit offset of RX_FIFO_LVL bits in SPI_STATUS regiter.
143  * @tx_st_done: Bit offset of TX_DONE bit in SPI_STATUS regiter.
144  * @high_speed: True, if the controller supports HIGH_SPEED_EN bit.
145  * @clk_from_cmu: True, if the controller does not include a clock mux and
146  *      prescaler unit.
147  *
148  * The Samsung s3c64xx SPI controller are used on various Samsung SoC's but
149  * differ in some aspects such as the size of the fifo and spi bus clock
150  * setup. Such differences are specified to the driver using this structure
151  * which is provided as driver data to the driver.
152  */
153 struct s3c64xx_spi_port_config {
154         int     fifo_lvl_mask[MAX_SPI_PORTS];
155         int     rx_lvl_offset;
156         int     tx_st_done;
157         bool    high_speed;
158         bool    clk_from_cmu;
159 };
160
161 /**
162  * struct s3c64xx_spi_driver_data - Runtime info holder for SPI driver.
163  * @clk: Pointer to the spi clock.
164  * @src_clk: Pointer to the clock used to generate SPI signals.
165  * @master: Pointer to the SPI Protocol master.
166  * @cntrlr_info: Platform specific data for the controller this driver manages.
167  * @tgl_spi: Pointer to the last CS left untoggled by the cs_change hint.
168  * @queue: To log SPI xfer requests.
169  * @lock: Controller specific lock.
170  * @state: Set of FLAGS to indicate status.
171  * @rx_dmach: Controller's DMA channel for Rx.
172  * @tx_dmach: Controller's DMA channel for Tx.
173  * @sfr_start: BUS address of SPI controller regs.
174  * @regs: Pointer to ioremap'ed controller registers.
175  * @irq: interrupt
176  * @xfer_completion: To indicate completion of xfer task.
177  * @cur_mode: Stores the active configuration of the controller.
178  * @cur_bpw: Stores the active bits per word settings.
179  * @cur_speed: Stores the active xfer clock speed.
180  */
181 struct s3c64xx_spi_driver_data {
182         void __iomem                    *regs;
183         struct clk                      *clk;
184         struct clk                      *src_clk;
185         struct platform_device          *pdev;
186         struct spi_master               *master;
187         struct s3c64xx_spi_info  *cntrlr_info;
188         struct spi_device               *tgl_spi;
189         struct list_head                queue;
190         spinlock_t                      lock;
191         unsigned long                   sfr_start;
192         struct completion               xfer_completion;
193         unsigned                        state;
194         unsigned                        cur_mode, cur_bpw;
195         unsigned                        cur_speed;
196         struct s3c64xx_spi_dma_data     rx_dma;
197         struct s3c64xx_spi_dma_data     tx_dma;
198         struct samsung_dma_ops          *ops;
199         struct s3c64xx_spi_port_config  *port_conf;
200         unsigned int                    port_id;
201         unsigned long                   gpios[4];
202 };
203
204 static struct s3c2410_dma_client s3c64xx_spi_dma_client = {
205         .name = "samsung-spi-dma",
206 };
207
208 static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
209 {
210         void __iomem *regs = sdd->regs;
211         unsigned long loops;
212         u32 val;
213
214         writel(0, regs + S3C64XX_SPI_PACKET_CNT);
215
216         val = readl(regs + S3C64XX_SPI_CH_CFG);
217         val &= ~(S3C64XX_SPI_CH_RXCH_ON | S3C64XX_SPI_CH_TXCH_ON);
218         writel(val, regs + S3C64XX_SPI_CH_CFG);
219
220         val = readl(regs + S3C64XX_SPI_CH_CFG);
221         val |= S3C64XX_SPI_CH_SW_RST;
222         val &= ~S3C64XX_SPI_CH_HS_EN;
223         writel(val, regs + S3C64XX_SPI_CH_CFG);
224
225         /* Flush TxFIFO*/
226         loops = msecs_to_loops(1);
227         do {
228                 val = readl(regs + S3C64XX_SPI_STATUS);
229         } while (TX_FIFO_LVL(val, sdd) && loops--);
230
231         if (loops == 0)
232                 dev_warn(&sdd->pdev->dev, "Timed out flushing TX FIFO\n");
233
234         /* Flush RxFIFO*/
235         loops = msecs_to_loops(1);
236         do {
237                 val = readl(regs + S3C64XX_SPI_STATUS);
238                 if (RX_FIFO_LVL(val, sdd))
239                         readl(regs + S3C64XX_SPI_RX_DATA);
240                 else
241                         break;
242         } while (loops--);
243
244         if (loops == 0)
245                 dev_warn(&sdd->pdev->dev, "Timed out flushing RX FIFO\n");
246
247         val = readl(regs + S3C64XX_SPI_CH_CFG);
248         val &= ~S3C64XX_SPI_CH_SW_RST;
249         writel(val, regs + S3C64XX_SPI_CH_CFG);
250
251         val = readl(regs + S3C64XX_SPI_MODE_CFG);
252         val &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON);
253         writel(val, regs + S3C64XX_SPI_MODE_CFG);
254 }
255
256 static void s3c64xx_spi_dmacb(void *data)
257 {
258         struct s3c64xx_spi_driver_data *sdd;
259         struct s3c64xx_spi_dma_data *dma = data;
260         unsigned long flags;
261
262         if (dma->direction == DMA_DEV_TO_MEM)
263                 sdd = container_of(data,
264                         struct s3c64xx_spi_driver_data, rx_dma);
265         else
266                 sdd = container_of(data,
267                         struct s3c64xx_spi_driver_data, tx_dma);
268
269         spin_lock_irqsave(&sdd->lock, flags);
270
271         if (dma->direction == DMA_DEV_TO_MEM) {
272                 sdd->state &= ~RXBUSY;
273                 if (!(sdd->state & TXBUSY))
274                         complete(&sdd->xfer_completion);
275         } else {
276                 sdd->state &= ~TXBUSY;
277                 if (!(sdd->state & RXBUSY))
278                         complete(&sdd->xfer_completion);
279         }
280
281         spin_unlock_irqrestore(&sdd->lock, flags);
282 }
283
284 static void prepare_dma(struct s3c64xx_spi_dma_data *dma,
285                                         unsigned len, dma_addr_t buf)
286 {
287         struct s3c64xx_spi_driver_data *sdd;
288         struct samsung_dma_prep info;
289         struct samsung_dma_config config;
290
291         if (dma->direction == DMA_DEV_TO_MEM) {
292                 sdd = container_of((void *)dma,
293                         struct s3c64xx_spi_driver_data, rx_dma);
294                 config.direction = sdd->rx_dma.direction;
295                 config.fifo = sdd->sfr_start + S3C64XX_SPI_RX_DATA;
296                 config.width = sdd->cur_bpw / 8;
297                 sdd->ops->config(sdd->rx_dma.ch, &config);
298         } else {
299                 sdd = container_of((void *)dma,
300                         struct s3c64xx_spi_driver_data, tx_dma);
301                 config.direction =  sdd->tx_dma.direction;
302                 config.fifo = sdd->sfr_start + S3C64XX_SPI_TX_DATA;
303                 config.width = sdd->cur_bpw / 8;
304                 sdd->ops->config(sdd->tx_dma.ch, &config);
305         }
306
307         info.cap = DMA_SLAVE;
308         info.len = len;
309         info.fp = s3c64xx_spi_dmacb;
310         info.fp_param = dma;
311         info.direction = dma->direction;
312         info.buf = buf;
313
314         sdd->ops->prepare(dma->ch, &info);
315         sdd->ops->trigger(dma->ch);
316 }
317
318 static int acquire_dma(struct s3c64xx_spi_driver_data *sdd)
319 {
320         struct samsung_dma_req req;
321         struct device *dev = &sdd->pdev->dev;
322
323         sdd->ops = samsung_dma_get_ops();
324
325         req.cap = DMA_SLAVE;
326         req.client = &s3c64xx_spi_dma_client;
327
328         sdd->rx_dma.ch = sdd->ops->request(sdd->rx_dma.dmach, &req, dev, "rx");
329         sdd->tx_dma.ch = sdd->ops->request(sdd->tx_dma.dmach, &req, dev, "tx");
330
331         return 1;
332 }
333
334 static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
335                                 struct spi_device *spi,
336                                 struct spi_transfer *xfer, int dma_mode)
337 {
338         void __iomem *regs = sdd->regs;
339         u32 modecfg, chcfg;
340
341         modecfg = readl(regs + S3C64XX_SPI_MODE_CFG);
342         modecfg &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON);
343
344         chcfg = readl(regs + S3C64XX_SPI_CH_CFG);
345         chcfg &= ~S3C64XX_SPI_CH_TXCH_ON;
346
347         if (dma_mode) {
348                 chcfg &= ~S3C64XX_SPI_CH_RXCH_ON;
349         } else {
350                 /* Always shift in data in FIFO, even if xfer is Tx only,
351                  * this helps setting PCKT_CNT value for generating clocks
352                  * as exactly needed.
353                  */
354                 chcfg |= S3C64XX_SPI_CH_RXCH_ON;
355                 writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff)
356                                         | S3C64XX_SPI_PACKET_CNT_EN,
357                                         regs + S3C64XX_SPI_PACKET_CNT);
358         }
359
360         if (xfer->tx_buf != NULL) {
361                 sdd->state |= TXBUSY;
362                 chcfg |= S3C64XX_SPI_CH_TXCH_ON;
363                 if (dma_mode) {
364                         modecfg |= S3C64XX_SPI_MODE_TXDMA_ON;
365                         prepare_dma(&sdd->tx_dma, xfer->len, xfer->tx_dma);
366                 } else {
367                         switch (sdd->cur_bpw) {
368                         case 32:
369                                 iowrite32_rep(regs + S3C64XX_SPI_TX_DATA,
370                                         xfer->tx_buf, xfer->len / 4);
371                                 break;
372                         case 16:
373                                 iowrite16_rep(regs + S3C64XX_SPI_TX_DATA,
374                                         xfer->tx_buf, xfer->len / 2);
375                                 break;
376                         default:
377                                 iowrite8_rep(regs + S3C64XX_SPI_TX_DATA,
378                                         xfer->tx_buf, xfer->len);
379                                 break;
380                         }
381                 }
382         }
383
384         if (xfer->rx_buf != NULL) {
385                 sdd->state |= RXBUSY;
386
387                 if (sdd->port_conf->high_speed && sdd->cur_speed >= 30000000UL
388                                         && !(sdd->cur_mode & SPI_CPHA))
389                         chcfg |= S3C64XX_SPI_CH_HS_EN;
390
391                 if (dma_mode) {
392                         modecfg |= S3C64XX_SPI_MODE_RXDMA_ON;
393                         chcfg |= S3C64XX_SPI_CH_RXCH_ON;
394                         writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff)
395                                         | S3C64XX_SPI_PACKET_CNT_EN,
396                                         regs + S3C64XX_SPI_PACKET_CNT);
397                         prepare_dma(&sdd->rx_dma, xfer->len, xfer->rx_dma);
398                 }
399         }
400
401         writel(modecfg, regs + S3C64XX_SPI_MODE_CFG);
402         writel(chcfg, regs + S3C64XX_SPI_CH_CFG);
403 }
404
405 static inline void enable_cs(struct s3c64xx_spi_driver_data *sdd,
406                                                 struct spi_device *spi)
407 {
408         struct s3c64xx_spi_csinfo *cs;
409
410         if (sdd->tgl_spi != NULL) { /* If last device toggled after mssg */
411                 if (sdd->tgl_spi != spi) { /* if last mssg on diff device */
412                         /* Deselect the last toggled device */
413                         cs = sdd->tgl_spi->controller_data;
414                         gpio_set_value(cs->line,
415                                 spi->mode & SPI_CS_HIGH ? 0 : 1);
416                 }
417                 sdd->tgl_spi = NULL;
418         }
419
420         cs = spi->controller_data;
421         gpio_set_value(cs->line, spi->mode & SPI_CS_HIGH ? 1 : 0);
422 }
423
424 static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd,
425                                 struct spi_transfer *xfer, int dma_mode)
426 {
427         void __iomem *regs = sdd->regs;
428         unsigned long val;
429         int ms;
430
431         /* millisecs to xfer 'len' bytes @ 'cur_speed' */
432         ms = xfer->len * 8 * 1000 / sdd->cur_speed;
433         ms += 10; /* some tolerance */
434
435         if (dma_mode) {
436                 val = msecs_to_jiffies(ms) + 10;
437                 val = wait_for_completion_timeout(&sdd->xfer_completion, val);
438         } else {
439                 u32 status;
440                 val = msecs_to_loops(ms);
441                 do {
442                         status = readl(regs + S3C64XX_SPI_STATUS);
443                 } while (RX_FIFO_LVL(status, sdd) < xfer->len && --val);
444         }
445
446         if (!val)
447                 return -EIO;
448
449         if (dma_mode) {
450                 u32 status;
451
452                 /*
453                  * DmaTx returns after simply writing data in the FIFO,
454                  * w/o waiting for real transmission on the bus to finish.
455                  * DmaRx returns only after Dma read data from FIFO which
456                  * needs bus transmission to finish, so we don't worry if
457                  * Xfer involved Rx(with or without Tx).
458                  */
459                 if (xfer->rx_buf == NULL) {
460                         val = msecs_to_loops(10);
461                         status = readl(regs + S3C64XX_SPI_STATUS);
462                         while ((TX_FIFO_LVL(status, sdd)
463                                 || !S3C64XX_SPI_ST_TX_DONE(status, sdd))
464                                         && --val) {
465                                 cpu_relax();
466                                 status = readl(regs + S3C64XX_SPI_STATUS);
467                         }
468
469                         if (!val)
470                                 return -EIO;
471                 }
472         } else {
473                 /* If it was only Tx */
474                 if (xfer->rx_buf == NULL) {
475                         sdd->state &= ~TXBUSY;
476                         return 0;
477                 }
478
479                 switch (sdd->cur_bpw) {
480                 case 32:
481                         ioread32_rep(regs + S3C64XX_SPI_RX_DATA,
482                                 xfer->rx_buf, xfer->len / 4);
483                         break;
484                 case 16:
485                         ioread16_rep(regs + S3C64XX_SPI_RX_DATA,
486                                 xfer->rx_buf, xfer->len / 2);
487                         break;
488                 default:
489                         ioread8_rep(regs + S3C64XX_SPI_RX_DATA,
490                                 xfer->rx_buf, xfer->len);
491                         break;
492                 }
493                 sdd->state &= ~RXBUSY;
494         }
495
496         return 0;
497 }
498
499 static inline void disable_cs(struct s3c64xx_spi_driver_data *sdd,
500                                                 struct spi_device *spi)
501 {
502         struct s3c64xx_spi_csinfo *cs = spi->controller_data;
503
504         if (sdd->tgl_spi == spi)
505                 sdd->tgl_spi = NULL;
506
507         gpio_set_value(cs->line, spi->mode & SPI_CS_HIGH ? 0 : 1);
508 }
509
510 static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
511 {
512         void __iomem *regs = sdd->regs;
513         u32 val;
514
515         /* Disable Clock */
516         if (sdd->port_conf->clk_from_cmu) {
517                 clk_disable_unprepare(sdd->src_clk);
518         } else {
519                 val = readl(regs + S3C64XX_SPI_CLK_CFG);
520                 val &= ~S3C64XX_SPI_ENCLK_ENABLE;
521                 writel(val, regs + S3C64XX_SPI_CLK_CFG);
522         }
523
524         /* Set Polarity and Phase */
525         val = readl(regs + S3C64XX_SPI_CH_CFG);
526         val &= ~(S3C64XX_SPI_CH_SLAVE |
527                         S3C64XX_SPI_CPOL_L |
528                         S3C64XX_SPI_CPHA_B);
529
530         if (sdd->cur_mode & SPI_CPOL)
531                 val |= S3C64XX_SPI_CPOL_L;
532
533         if (sdd->cur_mode & SPI_CPHA)
534                 val |= S3C64XX_SPI_CPHA_B;
535
536         writel(val, regs + S3C64XX_SPI_CH_CFG);
537
538         /* Set Channel & DMA Mode */
539         val = readl(regs + S3C64XX_SPI_MODE_CFG);
540         val &= ~(S3C64XX_SPI_MODE_BUS_TSZ_MASK
541                         | S3C64XX_SPI_MODE_CH_TSZ_MASK);
542
543         switch (sdd->cur_bpw) {
544         case 32:
545                 val |= S3C64XX_SPI_MODE_BUS_TSZ_WORD;
546                 val |= S3C64XX_SPI_MODE_CH_TSZ_WORD;
547                 break;
548         case 16:
549                 val |= S3C64XX_SPI_MODE_BUS_TSZ_HALFWORD;
550                 val |= S3C64XX_SPI_MODE_CH_TSZ_HALFWORD;
551                 break;
552         default:
553                 val |= S3C64XX_SPI_MODE_BUS_TSZ_BYTE;
554                 val |= S3C64XX_SPI_MODE_CH_TSZ_BYTE;
555                 break;
556         }
557
558         writel(val, regs + S3C64XX_SPI_MODE_CFG);
559
560         if (sdd->port_conf->clk_from_cmu) {
561                 /* Configure Clock */
562                 /* There is half-multiplier before the SPI */
563                 clk_set_rate(sdd->src_clk, sdd->cur_speed * 2);
564                 /* Enable Clock */
565                 clk_prepare_enable(sdd->src_clk);
566         } else {
567                 /* Configure Clock */
568                 val = readl(regs + S3C64XX_SPI_CLK_CFG);
569                 val &= ~S3C64XX_SPI_PSR_MASK;
570                 val |= ((clk_get_rate(sdd->src_clk) / sdd->cur_speed / 2 - 1)
571                                 & S3C64XX_SPI_PSR_MASK);
572                 writel(val, regs + S3C64XX_SPI_CLK_CFG);
573
574                 /* Enable Clock */
575                 val = readl(regs + S3C64XX_SPI_CLK_CFG);
576                 val |= S3C64XX_SPI_ENCLK_ENABLE;
577                 writel(val, regs + S3C64XX_SPI_CLK_CFG);
578         }
579 }
580
581 #define XFER_DMAADDR_INVALID DMA_BIT_MASK(32)
582
583 static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd,
584                                                 struct spi_message *msg)
585 {
586         struct device *dev = &sdd->pdev->dev;
587         struct spi_transfer *xfer;
588
589         if (msg->is_dma_mapped)
590                 return 0;
591
592         /* First mark all xfer unmapped */
593         list_for_each_entry(xfer, &msg->transfers, transfer_list) {
594                 xfer->rx_dma = XFER_DMAADDR_INVALID;
595                 xfer->tx_dma = XFER_DMAADDR_INVALID;
596         }
597
598         /* Map until end or first fail */
599         list_for_each_entry(xfer, &msg->transfers, transfer_list) {
600
601                 if (xfer->len <= ((FIFO_LVL_MASK(sdd) >> 1) + 1))
602                         continue;
603
604                 if (xfer->tx_buf != NULL) {
605                         xfer->tx_dma = dma_map_single(dev,
606                                         (void *)xfer->tx_buf, xfer->len,
607                                         DMA_TO_DEVICE);
608                         if (dma_mapping_error(dev, xfer->tx_dma)) {
609                                 dev_err(dev, "dma_map_single Tx failed\n");
610                                 xfer->tx_dma = XFER_DMAADDR_INVALID;
611                                 return -ENOMEM;
612                         }
613                 }
614
615                 if (xfer->rx_buf != NULL) {
616                         xfer->rx_dma = dma_map_single(dev, xfer->rx_buf,
617                                                 xfer->len, DMA_FROM_DEVICE);
618                         if (dma_mapping_error(dev, xfer->rx_dma)) {
619                                 dev_err(dev, "dma_map_single Rx failed\n");
620                                 dma_unmap_single(dev, xfer->tx_dma,
621                                                 xfer->len, DMA_TO_DEVICE);
622                                 xfer->tx_dma = XFER_DMAADDR_INVALID;
623                                 xfer->rx_dma = XFER_DMAADDR_INVALID;
624                                 return -ENOMEM;
625                         }
626                 }
627         }
628
629         return 0;
630 }
631
632 static void s3c64xx_spi_unmap_mssg(struct s3c64xx_spi_driver_data *sdd,
633                                                 struct spi_message *msg)
634 {
635         struct device *dev = &sdd->pdev->dev;
636         struct spi_transfer *xfer;
637
638         if (msg->is_dma_mapped)
639                 return;
640
641         list_for_each_entry(xfer, &msg->transfers, transfer_list) {
642
643                 if (xfer->len <= ((FIFO_LVL_MASK(sdd) >> 1) + 1))
644                         continue;
645
646                 if (xfer->rx_buf != NULL
647                                 && xfer->rx_dma != XFER_DMAADDR_INVALID)
648                         dma_unmap_single(dev, xfer->rx_dma,
649                                                 xfer->len, DMA_FROM_DEVICE);
650
651                 if (xfer->tx_buf != NULL
652                                 && xfer->tx_dma != XFER_DMAADDR_INVALID)
653                         dma_unmap_single(dev, xfer->tx_dma,
654                                                 xfer->len, DMA_TO_DEVICE);
655         }
656 }
657
658 static int s3c64xx_spi_transfer_one_message(struct spi_master *master,
659                                             struct spi_message *msg)
660 {
661         struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
662         struct spi_device *spi = msg->spi;
663         struct s3c64xx_spi_csinfo *cs = spi->controller_data;
664         struct spi_transfer *xfer;
665         int status = 0, cs_toggle = 0;
666         u32 speed;
667         u8 bpw;
668
669         /* If Master's(controller) state differs from that needed by Slave */
670         if (sdd->cur_speed != spi->max_speed_hz
671                         || sdd->cur_mode != spi->mode
672                         || sdd->cur_bpw != spi->bits_per_word) {
673                 sdd->cur_bpw = spi->bits_per_word;
674                 sdd->cur_speed = spi->max_speed_hz;
675                 sdd->cur_mode = spi->mode;
676                 s3c64xx_spi_config(sdd);
677         }
678
679         /* Map all the transfers if needed */
680         if (s3c64xx_spi_map_mssg(sdd, msg)) {
681                 dev_err(&spi->dev,
682                         "Xfer: Unable to map message buffers!\n");
683                 status = -ENOMEM;
684                 goto out;
685         }
686
687         /* Configure feedback delay */
688         writel(cs->fb_delay & 0x3, sdd->regs + S3C64XX_SPI_FB_CLK);
689
690         list_for_each_entry(xfer, &msg->transfers, transfer_list) {
691
692                 unsigned long flags;
693                 int use_dma;
694
695                 INIT_COMPLETION(sdd->xfer_completion);
696
697                 /* Only BPW and Speed may change across transfers */
698                 bpw = xfer->bits_per_word;
699                 speed = xfer->speed_hz ? : spi->max_speed_hz;
700
701                 if (xfer->len % (bpw / 8)) {
702                         dev_err(&spi->dev,
703                                 "Xfer length(%u) not a multiple of word size(%u)\n",
704                                 xfer->len, bpw / 8);
705                         status = -EIO;
706                         goto out;
707                 }
708
709                 if (bpw != sdd->cur_bpw || speed != sdd->cur_speed) {
710                         sdd->cur_bpw = bpw;
711                         sdd->cur_speed = speed;
712                         s3c64xx_spi_config(sdd);
713                 }
714
715                 /* Polling method for xfers not bigger than FIFO capacity */
716                 if (xfer->len <= ((FIFO_LVL_MASK(sdd) >> 1) + 1))
717                         use_dma = 0;
718                 else
719                         use_dma = 1;
720
721                 spin_lock_irqsave(&sdd->lock, flags);
722
723                 /* Pending only which is to be done */
724                 sdd->state &= ~RXBUSY;
725                 sdd->state &= ~TXBUSY;
726
727                 enable_datapath(sdd, spi, xfer, use_dma);
728
729                 /* Slave Select */
730                 enable_cs(sdd, spi);
731
732                 /* Start the signals */
733                 writel(0, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
734
735                 spin_unlock_irqrestore(&sdd->lock, flags);
736
737                 status = wait_for_xfer(sdd, xfer, use_dma);
738
739                 /* Quiese the signals */
740                 writel(S3C64XX_SPI_SLAVE_SIG_INACT,
741                        sdd->regs + S3C64XX_SPI_SLAVE_SEL);
742
743                 if (status) {
744                         dev_err(&spi->dev, "I/O Error: rx-%d tx-%d res:rx-%c tx-%c len-%d\n",
745                                 xfer->rx_buf ? 1 : 0, xfer->tx_buf ? 1 : 0,
746                                 (sdd->state & RXBUSY) ? 'f' : 'p',
747                                 (sdd->state & TXBUSY) ? 'f' : 'p',
748                                 xfer->len);
749
750                         if (use_dma) {
751                                 if (xfer->tx_buf != NULL
752                                                 && (sdd->state & TXBUSY))
753                                         sdd->ops->stop(sdd->tx_dma.ch);
754                                 if (xfer->rx_buf != NULL
755                                                 && (sdd->state & RXBUSY))
756                                         sdd->ops->stop(sdd->rx_dma.ch);
757                         }
758
759                         goto out;
760                 }
761
762                 if (xfer->delay_usecs)
763                         udelay(xfer->delay_usecs);
764
765                 if (xfer->cs_change) {
766                         /* Hint that the next mssg is gonna be
767                            for the same device */
768                         if (list_is_last(&xfer->transfer_list,
769                                                 &msg->transfers))
770                                 cs_toggle = 1;
771                 }
772
773                 msg->actual_length += xfer->len;
774
775                 flush_fifo(sdd);
776         }
777
778 out:
779         if (!cs_toggle || status)
780                 disable_cs(sdd, spi);
781         else
782                 sdd->tgl_spi = spi;
783
784         s3c64xx_spi_unmap_mssg(sdd, msg);
785
786         msg->status = status;
787
788         spi_finalize_current_message(master);
789
790         return 0;
791 }
792
793 static int s3c64xx_spi_prepare_transfer(struct spi_master *spi)
794 {
795         struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(spi);
796
797         /* Acquire DMA channels */
798         while (!acquire_dma(sdd))
799                 usleep_range(10000, 11000);
800
801         pm_runtime_get_sync(&sdd->pdev->dev);
802
803         return 0;
804 }
805
806 static int s3c64xx_spi_unprepare_transfer(struct spi_master *spi)
807 {
808         struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(spi);
809
810         /* Free DMA channels */
811         sdd->ops->release(sdd->rx_dma.ch, &s3c64xx_spi_dma_client);
812         sdd->ops->release(sdd->tx_dma.ch, &s3c64xx_spi_dma_client);
813
814         pm_runtime_put(&sdd->pdev->dev);
815
816         return 0;
817 }
818
819 static struct s3c64xx_spi_csinfo *s3c64xx_get_slave_ctrldata(
820                                 struct s3c64xx_spi_driver_data *sdd,
821                                 struct spi_device *spi)
822 {
823         struct s3c64xx_spi_csinfo *cs;
824         struct device_node *slave_np, *data_np = NULL;
825         u32 fb_delay = 0;
826
827         slave_np = spi->dev.of_node;
828         if (!slave_np) {
829                 dev_err(&spi->dev, "device node not found\n");
830                 return ERR_PTR(-EINVAL);
831         }
832
833         data_np = of_get_child_by_name(slave_np, "controller-data");
834         if (!data_np) {
835                 dev_err(&spi->dev, "child node 'controller-data' not found\n");
836                 return ERR_PTR(-EINVAL);
837         }
838
839         cs = kzalloc(sizeof(*cs), GFP_KERNEL);
840         if (!cs) {
841                 dev_err(&spi->dev, "could not allocate memory for controller data\n");
842                 of_node_put(data_np);
843                 return ERR_PTR(-ENOMEM);
844         }
845
846         cs->line = of_get_named_gpio(data_np, "cs-gpio", 0);
847         if (!gpio_is_valid(cs->line)) {
848                 dev_err(&spi->dev, "chip select gpio is not specified or invalid\n");
849                 kfree(cs);
850                 of_node_put(data_np);
851                 return ERR_PTR(-EINVAL);
852         }
853
854         of_property_read_u32(data_np, "samsung,spi-feedback-delay", &fb_delay);
855         cs->fb_delay = fb_delay;
856         of_node_put(data_np);
857         return cs;
858 }
859
860 /*
861  * Here we only check the validity of requested configuration
862  * and save the configuration in a local data-structure.
863  * The controller is actually configured only just before we
864  * get a message to transfer.
865  */
866 static int s3c64xx_spi_setup(struct spi_device *spi)
867 {
868         struct s3c64xx_spi_csinfo *cs = spi->controller_data;
869         struct s3c64xx_spi_driver_data *sdd;
870         struct s3c64xx_spi_info *sci;
871         struct spi_message *msg;
872         unsigned long flags;
873         int err;
874
875         sdd = spi_master_get_devdata(spi->master);
876         if (!cs && spi->dev.of_node) {
877                 cs = s3c64xx_get_slave_ctrldata(sdd, spi);
878                 spi->controller_data = cs;
879         }
880
881         if (IS_ERR_OR_NULL(cs)) {
882                 dev_err(&spi->dev, "No CS for SPI(%d)\n", spi->chip_select);
883                 return -ENODEV;
884         }
885
886         if (!spi_get_ctldata(spi)) {
887                 err = gpio_request_one(cs->line, GPIOF_OUT_INIT_HIGH,
888                                        dev_name(&spi->dev));
889                 if (err) {
890                         dev_err(&spi->dev,
891                                 "Failed to get /CS gpio [%d]: %d\n",
892                                 cs->line, err);
893                         goto err_gpio_req;
894                 }
895                 spi_set_ctldata(spi, cs);
896         }
897
898         sci = sdd->cntrlr_info;
899
900         spin_lock_irqsave(&sdd->lock, flags);
901
902         list_for_each_entry(msg, &sdd->queue, queue) {
903                 /* Is some mssg is already queued for this device */
904                 if (msg->spi == spi) {
905                         dev_err(&spi->dev,
906                                 "setup: attempt while mssg in queue!\n");
907                         spin_unlock_irqrestore(&sdd->lock, flags);
908                         err = -EBUSY;
909                         goto err_msgq;
910                 }
911         }
912
913         spin_unlock_irqrestore(&sdd->lock, flags);
914
915         if (spi->bits_per_word != 8
916                         && spi->bits_per_word != 16
917                         && spi->bits_per_word != 32) {
918                 dev_err(&spi->dev, "setup: %dbits/wrd not supported!\n",
919                                                         spi->bits_per_word);
920                 err = -EINVAL;
921                 goto setup_exit;
922         }
923
924         pm_runtime_get_sync(&sdd->pdev->dev);
925
926         /* Check if we can provide the requested rate */
927         if (!sdd->port_conf->clk_from_cmu) {
928                 u32 psr, speed;
929
930                 /* Max possible */
931                 speed = clk_get_rate(sdd->src_clk) / 2 / (0 + 1);
932
933                 if (spi->max_speed_hz > speed)
934                         spi->max_speed_hz = speed;
935
936                 psr = clk_get_rate(sdd->src_clk) / 2 / spi->max_speed_hz - 1;
937                 psr &= S3C64XX_SPI_PSR_MASK;
938                 if (psr == S3C64XX_SPI_PSR_MASK)
939                         psr--;
940
941                 speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1);
942                 if (spi->max_speed_hz < speed) {
943                         if (psr+1 < S3C64XX_SPI_PSR_MASK) {
944                                 psr++;
945                         } else {
946                                 err = -EINVAL;
947                                 goto setup_exit;
948                         }
949                 }
950
951                 speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1);
952                 if (spi->max_speed_hz >= speed) {
953                         spi->max_speed_hz = speed;
954                 } else {
955                         dev_err(&spi->dev, "Can't set %dHz transfer speed\n",
956                                 spi->max_speed_hz);
957                         err = -EINVAL;
958                         goto setup_exit;
959                 }
960         }
961
962         pm_runtime_put(&sdd->pdev->dev);
963         disable_cs(sdd, spi);
964         return 0;
965
966 setup_exit:
967         /* setup() returns with device de-selected */
968         disable_cs(sdd, spi);
969
970 err_msgq:
971         gpio_free(cs->line);
972         spi_set_ctldata(spi, NULL);
973
974 err_gpio_req:
975         if (spi->dev.of_node)
976                 kfree(cs);
977
978         return err;
979 }
980
981 static void s3c64xx_spi_cleanup(struct spi_device *spi)
982 {
983         struct s3c64xx_spi_csinfo *cs = spi_get_ctldata(spi);
984
985         if (cs) {
986                 gpio_free(cs->line);
987                 if (spi->dev.of_node)
988                         kfree(cs);
989         }
990         spi_set_ctldata(spi, NULL);
991 }
992
993 static irqreturn_t s3c64xx_spi_irq(int irq, void *data)
994 {
995         struct s3c64xx_spi_driver_data *sdd = data;
996         struct spi_master *spi = sdd->master;
997         unsigned int val;
998
999         val = readl(sdd->regs + S3C64XX_SPI_PENDING_CLR);
1000
1001         val &= S3C64XX_SPI_PND_RX_OVERRUN_CLR |
1002                 S3C64XX_SPI_PND_RX_UNDERRUN_CLR |
1003                 S3C64XX_SPI_PND_TX_OVERRUN_CLR |
1004                 S3C64XX_SPI_PND_TX_UNDERRUN_CLR;
1005
1006         writel(val, sdd->regs + S3C64XX_SPI_PENDING_CLR);
1007
1008         if (val & S3C64XX_SPI_PND_RX_OVERRUN_CLR)
1009                 dev_err(&spi->dev, "RX overrun\n");
1010         if (val & S3C64XX_SPI_PND_RX_UNDERRUN_CLR)
1011                 dev_err(&spi->dev, "RX underrun\n");
1012         if (val & S3C64XX_SPI_PND_TX_OVERRUN_CLR)
1013                 dev_err(&spi->dev, "TX overrun\n");
1014         if (val & S3C64XX_SPI_PND_TX_UNDERRUN_CLR)
1015                 dev_err(&spi->dev, "TX underrun\n");
1016
1017         return IRQ_HANDLED;
1018 }
1019
1020 static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel)
1021 {
1022         struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
1023         void __iomem *regs = sdd->regs;
1024         unsigned int val;
1025
1026         sdd->cur_speed = 0;
1027
1028         writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
1029
1030         /* Disable Interrupts - we use Polling if not DMA mode */
1031         writel(0, regs + S3C64XX_SPI_INT_EN);
1032
1033         if (!sdd->port_conf->clk_from_cmu)
1034                 writel(sci->src_clk_nr << S3C64XX_SPI_CLKSEL_SRCSHFT,
1035                                 regs + S3C64XX_SPI_CLK_CFG);
1036         writel(0, regs + S3C64XX_SPI_MODE_CFG);
1037         writel(0, regs + S3C64XX_SPI_PACKET_CNT);
1038
1039         /* Clear any irq pending bits */
1040         writel(readl(regs + S3C64XX_SPI_PENDING_CLR),
1041                                 regs + S3C64XX_SPI_PENDING_CLR);
1042
1043         writel(0, regs + S3C64XX_SPI_SWAP_CFG);
1044
1045         val = readl(regs + S3C64XX_SPI_MODE_CFG);
1046         val &= ~S3C64XX_SPI_MODE_4BURST;
1047         val &= ~(S3C64XX_SPI_MAX_TRAILCNT << S3C64XX_SPI_TRAILCNT_OFF);
1048         val |= (S3C64XX_SPI_TRAILCNT << S3C64XX_SPI_TRAILCNT_OFF);
1049         writel(val, regs + S3C64XX_SPI_MODE_CFG);
1050
1051         flush_fifo(sdd);
1052 }
1053
1054 #ifdef CONFIG_OF
1055 static int s3c64xx_spi_parse_dt_gpio(struct s3c64xx_spi_driver_data *sdd)
1056 {
1057         struct device *dev = &sdd->pdev->dev;
1058         int idx, gpio, ret;
1059
1060         /* find gpios for mosi, miso and clock lines */
1061         for (idx = 0; idx < 3; idx++) {
1062                 gpio = of_get_gpio(dev->of_node, idx);
1063                 if (!gpio_is_valid(gpio)) {
1064                         dev_err(dev, "invalid gpio[%d]: %d\n", idx, gpio);
1065                         goto free_gpio;
1066                 }
1067                 sdd->gpios[idx] = gpio;
1068                 ret = gpio_request(gpio, "spi-bus");
1069                 if (ret) {
1070                         dev_err(dev, "gpio [%d] request failed: %d\n",
1071                                 gpio, ret);
1072                         goto free_gpio;
1073                 }
1074         }
1075         return 0;
1076
1077 free_gpio:
1078         while (--idx >= 0)
1079                 gpio_free(sdd->gpios[idx]);
1080         return -EINVAL;
1081 }
1082
1083 static void s3c64xx_spi_dt_gpio_free(struct s3c64xx_spi_driver_data *sdd)
1084 {
1085         unsigned int idx;
1086         for (idx = 0; idx < 3; idx++)
1087                 gpio_free(sdd->gpios[idx]);
1088 }
1089
1090 static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev)
1091 {
1092         struct s3c64xx_spi_info *sci;
1093         u32 temp;
1094
1095         sci = devm_kzalloc(dev, sizeof(*sci), GFP_KERNEL);
1096         if (!sci) {
1097                 dev_err(dev, "memory allocation for spi_info failed\n");
1098                 return ERR_PTR(-ENOMEM);
1099         }
1100
1101         if (of_property_read_u32(dev->of_node, "samsung,spi-src-clk", &temp)) {
1102                 dev_warn(dev, "spi bus clock parent not specified, using clock at index 0 as parent\n");
1103                 sci->src_clk_nr = 0;
1104         } else {
1105                 sci->src_clk_nr = temp;
1106         }
1107
1108         if (of_property_read_u32(dev->of_node, "num-cs", &temp)) {
1109                 dev_warn(dev, "number of chip select lines not specified, assuming 1 chip select line\n");
1110                 sci->num_cs = 1;
1111         } else {
1112                 sci->num_cs = temp;
1113         }
1114
1115         return sci;
1116 }
1117 #else
1118 static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev)
1119 {
1120         return dev->platform_data;
1121 }
1122
1123 static int s3c64xx_spi_parse_dt_gpio(struct s3c64xx_spi_driver_data *sdd)
1124 {
1125         return -EINVAL;
1126 }
1127
1128 static void s3c64xx_spi_dt_gpio_free(struct s3c64xx_spi_driver_data *sdd)
1129 {
1130 }
1131 #endif
1132
1133 static const struct of_device_id s3c64xx_spi_dt_match[];
1134
1135 static inline struct s3c64xx_spi_port_config *s3c64xx_spi_get_port_config(
1136                                                 struct platform_device *pdev)
1137 {
1138 #ifdef CONFIG_OF
1139         if (pdev->dev.of_node) {
1140                 const struct of_device_id *match;
1141                 match = of_match_node(s3c64xx_spi_dt_match, pdev->dev.of_node);
1142                 return (struct s3c64xx_spi_port_config *)match->data;
1143         }
1144 #endif
1145         return (struct s3c64xx_spi_port_config *)
1146                          platform_get_device_id(pdev)->driver_data;
1147 }
1148
1149 static int s3c64xx_spi_probe(struct platform_device *pdev)
1150 {
1151         struct resource *mem_res;
1152         struct resource *res;
1153         struct s3c64xx_spi_driver_data *sdd;
1154         struct s3c64xx_spi_info *sci = pdev->dev.platform_data;
1155         struct spi_master *master;
1156         int ret, irq;
1157         char clk_name[16];
1158
1159         if (!sci && pdev->dev.of_node) {
1160                 sci = s3c64xx_spi_parse_dt(&pdev->dev);
1161                 if (IS_ERR(sci))
1162                         return PTR_ERR(sci);
1163         }
1164
1165         if (!sci) {
1166                 dev_err(&pdev->dev, "platform_data missing!\n");
1167                 return -ENODEV;
1168         }
1169
1170         mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1171         if (mem_res == NULL) {
1172                 dev_err(&pdev->dev, "Unable to get SPI MEM resource\n");
1173                 return -ENXIO;
1174         }
1175
1176         irq = platform_get_irq(pdev, 0);
1177         if (irq < 0) {
1178                 dev_warn(&pdev->dev, "Failed to get IRQ: %d\n", irq);
1179                 return irq;
1180         }
1181
1182         master = spi_alloc_master(&pdev->dev,
1183                                 sizeof(struct s3c64xx_spi_driver_data));
1184         if (master == NULL) {
1185                 dev_err(&pdev->dev, "Unable to allocate SPI Master\n");
1186                 return -ENOMEM;
1187         }
1188
1189         platform_set_drvdata(pdev, master);
1190
1191         sdd = spi_master_get_devdata(master);
1192         sdd->port_conf = s3c64xx_spi_get_port_config(pdev);
1193         sdd->master = master;
1194         sdd->cntrlr_info = sci;
1195         sdd->pdev = pdev;
1196         sdd->sfr_start = mem_res->start;
1197         if (pdev->dev.of_node) {
1198                 ret = of_alias_get_id(pdev->dev.of_node, "spi");
1199                 if (ret < 0) {
1200                         dev_err(&pdev->dev, "failed to get alias id, errno %d\n",
1201                                 ret);
1202                         goto err0;
1203                 }
1204                 sdd->port_id = ret;
1205         } else {
1206                 sdd->port_id = pdev->id;
1207         }
1208
1209         sdd->cur_bpw = 8;
1210
1211         if (!sdd->pdev->dev.of_node) {
1212                 res = platform_get_resource(pdev, IORESOURCE_DMA,  0);
1213                 if (!res) {
1214                         dev_err(&pdev->dev, "Unable to get SPI tx dma "
1215                                         "resource\n");
1216                         return -ENXIO;
1217                 }
1218                 sdd->tx_dma.dmach = res->start;
1219
1220                 res = platform_get_resource(pdev, IORESOURCE_DMA,  1);
1221                 if (!res) {
1222                         dev_err(&pdev->dev, "Unable to get SPI rx dma "
1223                                         "resource\n");
1224                         return -ENXIO;
1225                 }
1226                 sdd->rx_dma.dmach = res->start;
1227         }
1228
1229         sdd->tx_dma.direction = DMA_MEM_TO_DEV;
1230         sdd->rx_dma.direction = DMA_DEV_TO_MEM;
1231
1232         master->dev.of_node = pdev->dev.of_node;
1233         master->bus_num = sdd->port_id;
1234         master->setup = s3c64xx_spi_setup;
1235         master->cleanup = s3c64xx_spi_cleanup;
1236         master->prepare_transfer_hardware = s3c64xx_spi_prepare_transfer;
1237         master->transfer_one_message = s3c64xx_spi_transfer_one_message;
1238         master->unprepare_transfer_hardware = s3c64xx_spi_unprepare_transfer;
1239         master->num_chipselect = sci->num_cs;
1240         master->dma_alignment = 8;
1241         /* the spi->mode bits understood by this driver: */
1242         master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
1243
1244         sdd->regs = devm_ioremap_resource(&pdev->dev, mem_res);
1245         if (IS_ERR(sdd->regs)) {
1246                 ret = PTR_ERR(sdd->regs);
1247                 goto err0;
1248         }
1249
1250         if (!sci->cfg_gpio && pdev->dev.of_node) {
1251                 if (s3c64xx_spi_parse_dt_gpio(sdd))
1252                         return -EBUSY;
1253         } else if (sci->cfg_gpio == NULL || sci->cfg_gpio()) {
1254                 dev_err(&pdev->dev, "Unable to config gpio\n");
1255                 ret = -EBUSY;
1256                 goto err0;
1257         }
1258
1259         /* Setup clocks */
1260         sdd->clk = devm_clk_get(&pdev->dev, "spi");
1261         if (IS_ERR(sdd->clk)) {
1262                 dev_err(&pdev->dev, "Unable to acquire clock 'spi'\n");
1263                 ret = PTR_ERR(sdd->clk);
1264                 goto err1;
1265         }
1266
1267         if (clk_prepare_enable(sdd->clk)) {
1268                 dev_err(&pdev->dev, "Couldn't enable clock 'spi'\n");
1269                 ret = -EBUSY;
1270                 goto err1;
1271         }
1272
1273         sprintf(clk_name, "spi_busclk%d", sci->src_clk_nr);
1274         sdd->src_clk = devm_clk_get(&pdev->dev, clk_name);
1275         if (IS_ERR(sdd->src_clk)) {
1276                 dev_err(&pdev->dev,
1277                         "Unable to acquire clock '%s'\n", clk_name);
1278                 ret = PTR_ERR(sdd->src_clk);
1279                 goto err2;
1280         }
1281
1282         if (clk_prepare_enable(sdd->src_clk)) {
1283                 dev_err(&pdev->dev, "Couldn't enable clock '%s'\n", clk_name);
1284                 ret = -EBUSY;
1285                 goto err2;
1286         }
1287
1288         /* Setup Deufult Mode */
1289         s3c64xx_spi_hwinit(sdd, sdd->port_id);
1290
1291         spin_lock_init(&sdd->lock);
1292         init_completion(&sdd->xfer_completion);
1293         INIT_LIST_HEAD(&sdd->queue);
1294
1295         ret = devm_request_irq(&pdev->dev, irq, s3c64xx_spi_irq, 0,
1296                                 "spi-s3c64xx", sdd);
1297         if (ret != 0) {
1298                 dev_err(&pdev->dev, "Failed to request IRQ %d: %d\n",
1299                         irq, ret);
1300                 goto err3;
1301         }
1302
1303         writel(S3C64XX_SPI_INT_RX_OVERRUN_EN | S3C64XX_SPI_INT_RX_UNDERRUN_EN |
1304                S3C64XX_SPI_INT_TX_OVERRUN_EN | S3C64XX_SPI_INT_TX_UNDERRUN_EN,
1305                sdd->regs + S3C64XX_SPI_INT_EN);
1306
1307         if (spi_register_master(master)) {
1308                 dev_err(&pdev->dev, "cannot register SPI master\n");
1309                 ret = -EBUSY;
1310                 goto err3;
1311         }
1312
1313         dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d with %d Slaves attached\n",
1314                                         sdd->port_id, master->num_chipselect);
1315         dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\tDMA=[Rx-%d, Tx-%d]\n",
1316                                         mem_res->end, mem_res->start,
1317                                         sdd->rx_dma.dmach, sdd->tx_dma.dmach);
1318
1319         pm_runtime_enable(&pdev->dev);
1320
1321         return 0;
1322
1323 err3:
1324         clk_disable_unprepare(sdd->src_clk);
1325 err2:
1326         clk_disable_unprepare(sdd->clk);
1327 err1:
1328         if (!sdd->cntrlr_info->cfg_gpio && pdev->dev.of_node)
1329                 s3c64xx_spi_dt_gpio_free(sdd);
1330 err0:
1331         platform_set_drvdata(pdev, NULL);
1332         spi_master_put(master);
1333
1334         return ret;
1335 }
1336
1337 static int s3c64xx_spi_remove(struct platform_device *pdev)
1338 {
1339         struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
1340         struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
1341
1342         pm_runtime_disable(&pdev->dev);
1343
1344         spi_unregister_master(master);
1345
1346         writel(0, sdd->regs + S3C64XX_SPI_INT_EN);
1347
1348         clk_disable_unprepare(sdd->src_clk);
1349
1350         clk_disable_unprepare(sdd->clk);
1351
1352         if (!sdd->cntrlr_info->cfg_gpio && pdev->dev.of_node)
1353                 s3c64xx_spi_dt_gpio_free(sdd);
1354
1355         platform_set_drvdata(pdev, NULL);
1356         spi_master_put(master);
1357
1358         return 0;
1359 }
1360
1361 #ifdef CONFIG_PM
1362 static int s3c64xx_spi_suspend(struct device *dev)
1363 {
1364         struct spi_master *master = dev_get_drvdata(dev);
1365         struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
1366
1367         spi_master_suspend(master);
1368
1369         /* Disable the clock */
1370         clk_disable_unprepare(sdd->src_clk);
1371         clk_disable_unprepare(sdd->clk);
1372
1373         if (!sdd->cntrlr_info->cfg_gpio && dev->of_node)
1374                 s3c64xx_spi_dt_gpio_free(sdd);
1375
1376         sdd->cur_speed = 0; /* Output Clock is stopped */
1377
1378         return 0;
1379 }
1380
1381 static int s3c64xx_spi_resume(struct device *dev)
1382 {
1383         struct spi_master *master = dev_get_drvdata(dev);
1384         struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
1385         struct s3c64xx_spi_info *sci = sdd->cntrlr_info;
1386
1387         if (!sci->cfg_gpio && dev->of_node)
1388                 s3c64xx_spi_parse_dt_gpio(sdd);
1389         else
1390                 sci->cfg_gpio();
1391
1392         /* Enable the clock */
1393         clk_prepare_enable(sdd->src_clk);
1394         clk_prepare_enable(sdd->clk);
1395
1396         s3c64xx_spi_hwinit(sdd, sdd->port_id);
1397
1398         spi_master_resume(master);
1399
1400         return 0;
1401 }
1402 #endif /* CONFIG_PM */
1403
1404 #ifdef CONFIG_PM_RUNTIME
1405 static int s3c64xx_spi_runtime_suspend(struct device *dev)
1406 {
1407         struct spi_master *master = dev_get_drvdata(dev);
1408         struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
1409
1410         clk_disable_unprepare(sdd->clk);
1411         clk_disable_unprepare(sdd->src_clk);
1412
1413         return 0;
1414 }
1415
1416 static int s3c64xx_spi_runtime_resume(struct device *dev)
1417 {
1418         struct spi_master *master = dev_get_drvdata(dev);
1419         struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
1420
1421         clk_prepare_enable(sdd->src_clk);
1422         clk_prepare_enable(sdd->clk);
1423
1424         return 0;
1425 }
1426 #endif /* CONFIG_PM_RUNTIME */
1427
1428 static const struct dev_pm_ops s3c64xx_spi_pm = {
1429         SET_SYSTEM_SLEEP_PM_OPS(s3c64xx_spi_suspend, s3c64xx_spi_resume)
1430         SET_RUNTIME_PM_OPS(s3c64xx_spi_runtime_suspend,
1431                            s3c64xx_spi_runtime_resume, NULL)
1432 };
1433
1434 static struct s3c64xx_spi_port_config s3c2443_spi_port_config = {
1435         .fifo_lvl_mask  = { 0x7f },
1436         .rx_lvl_offset  = 13,
1437         .tx_st_done     = 21,
1438         .high_speed     = true,
1439 };
1440
1441 static struct s3c64xx_spi_port_config s3c6410_spi_port_config = {
1442         .fifo_lvl_mask  = { 0x7f, 0x7F },
1443         .rx_lvl_offset  = 13,
1444         .tx_st_done     = 21,
1445 };
1446
1447 static struct s3c64xx_spi_port_config s5p64x0_spi_port_config = {
1448         .fifo_lvl_mask  = { 0x1ff, 0x7F },
1449         .rx_lvl_offset  = 15,
1450         .tx_st_done     = 25,
1451 };
1452
1453 static struct s3c64xx_spi_port_config s5pc100_spi_port_config = {
1454         .fifo_lvl_mask  = { 0x7f, 0x7F },
1455         .rx_lvl_offset  = 13,
1456         .tx_st_done     = 21,
1457         .high_speed     = true,
1458 };
1459
1460 static struct s3c64xx_spi_port_config s5pv210_spi_port_config = {
1461         .fifo_lvl_mask  = { 0x1ff, 0x7F },
1462         .rx_lvl_offset  = 15,
1463         .tx_st_done     = 25,
1464         .high_speed     = true,
1465 };
1466
1467 static struct s3c64xx_spi_port_config exynos4_spi_port_config = {
1468         .fifo_lvl_mask  = { 0x1ff, 0x7F, 0x7F },
1469         .rx_lvl_offset  = 15,
1470         .tx_st_done     = 25,
1471         .high_speed     = true,
1472         .clk_from_cmu   = true,
1473 };
1474
1475 static struct platform_device_id s3c64xx_spi_driver_ids[] = {
1476         {
1477                 .name           = "s3c2443-spi",
1478                 .driver_data    = (kernel_ulong_t)&s3c2443_spi_port_config,
1479         }, {
1480                 .name           = "s3c6410-spi",
1481                 .driver_data    = (kernel_ulong_t)&s3c6410_spi_port_config,
1482         }, {
1483                 .name           = "s5p64x0-spi",
1484                 .driver_data    = (kernel_ulong_t)&s5p64x0_spi_port_config,
1485         }, {
1486                 .name           = "s5pc100-spi",
1487                 .driver_data    = (kernel_ulong_t)&s5pc100_spi_port_config,
1488         }, {
1489                 .name           = "s5pv210-spi",
1490                 .driver_data    = (kernel_ulong_t)&s5pv210_spi_port_config,
1491         }, {
1492                 .name           = "exynos4210-spi",
1493                 .driver_data    = (kernel_ulong_t)&exynos4_spi_port_config,
1494         },
1495         { },
1496 };
1497
1498 #ifdef CONFIG_OF
1499 static const struct of_device_id s3c64xx_spi_dt_match[] = {
1500         { .compatible = "samsung,exynos4210-spi",
1501                         .data = (void *)&exynos4_spi_port_config,
1502         },
1503         { },
1504 };
1505 MODULE_DEVICE_TABLE(of, s3c64xx_spi_dt_match);
1506 #endif /* CONFIG_OF */
1507
1508 static struct platform_driver s3c64xx_spi_driver = {
1509         .driver = {
1510                 .name   = "s3c64xx-spi",
1511                 .owner = THIS_MODULE,
1512                 .pm = &s3c64xx_spi_pm,
1513                 .of_match_table = of_match_ptr(s3c64xx_spi_dt_match),
1514         },
1515         .remove = s3c64xx_spi_remove,
1516         .id_table = s3c64xx_spi_driver_ids,
1517 };
1518 MODULE_ALIAS("platform:s3c64xx-spi");
1519
1520 static int __init s3c64xx_spi_init(void)
1521 {
1522         return platform_driver_probe(&s3c64xx_spi_driver, s3c64xx_spi_probe);
1523 }
1524 subsys_initcall(s3c64xx_spi_init);
1525
1526 static void __exit s3c64xx_spi_exit(void)
1527 {
1528         platform_driver_unregister(&s3c64xx_spi_driver);
1529 }
1530 module_exit(s3c64xx_spi_exit);
1531
1532 MODULE_AUTHOR("Jaswinder Singh <jassi.brar@samsung.com>");
1533 MODULE_DESCRIPTION("S3C64XX SPI Controller Driver");
1534 MODULE_LICENSE("GPL");