drivers/spi/spi-dw.c

   1 /*
   2  * Designware SPI core controller driver (refer pxa2xx_spi.c)
   3  *
   4  * Copyright (c) 2009, Intel Corporation.
   5  *
   6  * This program is free software; you can redistribute it and/or modify it
   7  * under the terms and conditions of the GNU General Public License,
   8  * version 2, as published by the Free Software Foundation.
   9  *
  10  * This program is distributed in the hope it will be useful, but WITHOUT
  11  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13  * more details.
  14  *
  15  * You should have received a copy of the GNU General Public License along with
  16  * this program; if not, write to the Free Software Foundation, Inc.,
  17  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  18  */
  19
  20 #include <linux/dma-mapping.h>
  21 #include <linux/interrupt.h>
  22 #include <linux/module.h>
  23 #include <linux/highmem.h>
  24 #include <linux/delay.h>
  25 #include <linux/slab.h>
  26 #include <linux/spi/spi.h>
  27
  28 #include "spi-dw.h"
  29
  30 #ifdef CONFIG_DEBUG_FS
  31 #include <linux/debugfs.h>
  32 #endif
  33
  34 #define START_STATE     ((void *)0)
  35 #define RUNNING_STATE   ((void *)1)
  36 #define DONE_STATE      ((void *)2)
  37 #define ERROR_STATE     ((void *)-1)
  38
  39 #define QUEUE_RUNNING   0
  40 #define QUEUE_STOPPED   1
  41
  42 #define MRST_SPI_DEASSERT       0
  43 #define MRST_SPI_ASSERT         1
  44
  45 /* Slave spi_dev related */
  46 struct chip_data {
  47         u16 cr0;
  48         u8 cs;                  /* chip select pin */
  49         u8 n_bytes;             /* current is a 1/2/4 byte op */
  50         u8 tmode;               /* TR/TO/RO/EEPROM */
  51         u8 type;                /* SPI/SSP/MicroWire */
  52
  53         u8 poll_mode;           /* 1 means use poll mode */
  54
  55         u32 dma_width;
  56         u32 rx_threshold;
  57         u32 tx_threshold;
  58         u8 enable_dma;
  59         u8 bits_per_word;
  60         u16 clk_div;            /* baud rate divider */
  61         u32 speed_hz;           /* baud rate */
  62         void (*cs_control)(u32 command);
  63 };
  64
  65 #ifdef CONFIG_DEBUG_FS
  66 #define SPI_REGS_BUFSIZE        1024
  67 static ssize_t  spi_show_regs(struct file *file, char __user *user_buf,
  68                                 size_t count, loff_t *ppos)
  69 {
  70         struct dw_spi *dws;
  71         char *buf;
  72         u32 len = 0;
  73         ssize_t ret;
  74
  75         dws = file->private_data;
  76
  77         buf = kzalloc(SPI_REGS_BUFSIZE, GFP_KERNEL);
  78         if (!buf)
  79                 return 0;
  80
  81         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
  82                         "MRST SPI0 registers:\n");
  83         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
  84                         "=================================\n");
  85         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
  86                         "CTRL0: \t\t0x%08x\n", dw_readl(dws, DW_SPI_CTRL0));
  87         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
  88                         "CTRL1: \t\t0x%08x\n", dw_readl(dws, DW_SPI_CTRL1));
  89         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
  90                         "SSIENR: \t0x%08x\n", dw_readl(dws, DW_SPI_SSIENR));
  91         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
  92                         "SER: \t\t0x%08x\n", dw_readl(dws, DW_SPI_SER));
  93         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
  94                         "BAUDR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_BAUDR));
  95         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
  96                         "TXFTLR: \t0x%08x\n", dw_readl(dws, DW_SPI_TXFLTR));
  97         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
  98                         "RXFTLR: \t0x%08x\n", dw_readl(dws, DW_SPI_RXFLTR));
  99         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
 100                         "TXFLR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_TXFLR));
 101         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
 102                         "RXFLR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_RXFLR));
 103         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
 104                         "SR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_SR));
 105         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
 106                         "IMR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_IMR));
 107         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
 108                         "ISR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_ISR));
 109         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
 110                         "DMACR: \t\t0x%08x\n", dw_readl(dws, DW_SPI_DMACR));
 111         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
 112                         "DMATDLR: \t0x%08x\n", dw_readl(dws, DW_SPI_DMATDLR));
 113         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
 114                         "DMARDLR: \t0x%08x\n", dw_readl(dws, DW_SPI_DMARDLR));
 115         len += snprintf(buf + len, SPI_REGS_BUFSIZE - len,
 116                         "=================================\n");
 117
 118         ret =  simple_read_from_buffer(user_buf, count, ppos, buf, len);
 119         kfree(buf);
 120         return ret;
 121 }
 122
 123 static const struct file_operations mrst_spi_regs_ops = {
 124         .owner          = THIS_MODULE,
 125         .open           = simple_open,
 126         .read           = spi_show_regs,
 127         .llseek         = default_llseek,
 128 };
 129
 130 static int mrst_spi_debugfs_init(struct dw_spi *dws)
 131 {
 132         dws->debugfs = debugfs_create_dir("mrst_spi", NULL);
 133         if (!dws->debugfs)
 134                 return -ENOMEM;
 135
 136         debugfs_create_file("registers", S_IFREG | S_IRUGO,
 137                 dws->debugfs, (void *)dws, &mrst_spi_regs_ops);
 138         return 0;
 139 }
 140
 141 static void mrst_spi_debugfs_remove(struct dw_spi *dws)
 142 {
 143         if (dws->debugfs)
 144                 debugfs_remove_recursive(dws->debugfs);
 145 }
 146
 147 #else
 148 static inline int mrst_spi_debugfs_init(struct dw_spi *dws)
 149 {
 150         return 0;
 151 }
 152
 153 static inline void mrst_spi_debugfs_remove(struct dw_spi *dws)
 154 {
 155 }
 156 #endif /* CONFIG_DEBUG_FS */
 157
 158 /* Return the max entries we can fill into tx fifo */
 159 static inline u32 tx_max(struct dw_spi *dws)
 160 {
 161         u32 tx_left, tx_room, rxtx_gap;
 162
 163         tx_left = (dws->tx_end - dws->tx) / dws->n_bytes;
 164         tx_room = dws->fifo_len - dw_readw(dws, DW_SPI_TXFLR);
 165
 166         /*
 167          * Another concern is about the tx/rx mismatch, we
 168          * though to use (dws->fifo_len - rxflr - txflr) as
 169          * one maximum value for tx, but it doesn't cover the
 170          * data which is out of tx/rx fifo and inside the
 171          * shift registers. So a control from sw point of
 172          * view is taken.
 173          */
 174         rxtx_gap =  ((dws->rx_end - dws->rx) - (dws->tx_end - dws->tx))
 175                         / dws->n_bytes;
 176
 177         return min3(tx_left, tx_room, (u32) (dws->fifo_len - rxtx_gap));
 178 }
 179
 180 /* Return the max entries we should read out of rx fifo */
 181 static inline u32 rx_max(struct dw_spi *dws)
 182 {
 183         u32 rx_left = (dws->rx_end - dws->rx) / dws->n_bytes;
 184
 185         return min(rx_left, (u32)dw_readw(dws, DW_SPI_RXFLR));
 186 }
 187
 188 static void dw_writer(struct dw_spi *dws)
 189 {
 190         u32 max = tx_max(dws);
 191         u16 txw = 0;
 192
 193         while (max--) {
 194                 /* Set the tx word if the transfer's original "tx" is not null */
 195                 if (dws->tx_end - dws->len) {
 196                         if (dws->n_bytes == 1)
 197                                 txw = *(u8 *)(dws->tx);
 198                         else
 199                                 txw = *(u16 *)(dws->tx);
 200                 }
 201                 dw_writew(dws, DW_SPI_DR, txw);
 202                 dws->tx += dws->n_bytes;
 203         }
 204 }
 205
 206 static void dw_reader(struct dw_spi *dws)
 207 {
 208         u32 max = rx_max(dws);
 209         u16 rxw;
 210
 211         while (max--) {
 212                 rxw = dw_readw(dws, DW_SPI_DR);
 213                 /* Care rx only if the transfer's original "rx" is not null */
 214                 if (dws->rx_end - dws->len) {
 215                         if (dws->n_bytes == 1)
 216                                 *(u8 *)(dws->rx) = rxw;
 217                         else
 218                                 *(u16 *)(dws->rx) = rxw;
 219                 }
 220                 dws->rx += dws->n_bytes;
 221         }
 222 }
 223
 224 static void *next_transfer(struct dw_spi *dws)
 225 {
 226         struct spi_message *msg = dws->cur_msg;
 227         struct spi_transfer *trans = dws->cur_transfer;
 228
 229         /* Move to next transfer */
 230         if (trans->transfer_list.next != &msg->transfers) {
 231                 dws->cur_transfer =
 232                         list_entry(trans->transfer_list.next,
 233                                         struct spi_transfer,
 234                                         transfer_list);
 235                 return RUNNING_STATE;
 236         } else
 237                 return DONE_STATE;
 238 }
 239
 240 /*
 241  * Note: first step is the protocol driver prepares
 242  * a dma-capable memory, and this func just need translate
 243  * the virt addr to physical
 244  */
 245 static int map_dma_buffers(struct dw_spi *dws)
 246 {
 247         if (!dws->cur_msg->is_dma_mapped
 248                 || !dws->dma_inited
 249                 || !dws->cur_chip->enable_dma
 250                 || !dws->dma_ops)
 251                 return 0;
 252
 253         if (dws->cur_transfer->tx_dma)
 254                 dws->tx_dma = dws->cur_transfer->tx_dma;
 255
 256         if (dws->cur_transfer->rx_dma)
 257                 dws->rx_dma = dws->cur_transfer->rx_dma;
 258
 259         return 1;
 260 }
 261
 262 /* Caller already set message->status; dma and pio irqs are blocked */
 263 static void giveback(struct dw_spi *dws)
 264 {
 265         struct spi_transfer *last_transfer;
 266         unsigned long flags;
 267         struct spi_message *msg;
 268
 269         spin_lock_irqsave(&dws->lock, flags);
 270         msg = dws->cur_msg;
 271         dws->cur_msg = NULL;
 272         dws->cur_transfer = NULL;
 273         dws->prev_chip = dws->cur_chip;
 274         dws->cur_chip = NULL;
 275         dws->dma_mapped = 0;
 276         queue_work(dws->workqueue, &dws->pump_messages);
 277         spin_unlock_irqrestore(&dws->lock, flags);
 278
 279         last_transfer = list_entry(msg->transfers.prev,
 280                                         struct spi_transfer,
 281                                         transfer_list);
 282
 283         if (!last_transfer->cs_change && dws->cs_control)
 284                 dws->cs_control(MRST_SPI_DEASSERT);
 285
 286         msg->state = NULL;
 287         if (msg->complete)
 288                 msg->complete(msg->context);
 289 }
 290
 291 static void int_error_stop(struct dw_spi *dws, const char *msg)
 292 {
 293         /* Stop the hw */
 294         spi_enable_chip(dws, 0);
 295
 296         dev_err(&dws->master->dev, "%s\n", msg);
 297         dws->cur_msg->state = ERROR_STATE;
 298         tasklet_schedule(&dws->pump_transfers);
 299 }
 300
 301 void dw_spi_xfer_done(struct dw_spi *dws)
 302 {
 303         /* Update total byte transferred return count actual bytes read */
 304         dws->cur_msg->actual_length += dws->len;
 305
 306         /* Move to next transfer */
 307         dws->cur_msg->state = next_transfer(dws);
 308
 309         /* Handle end of message */
 310         if (dws->cur_msg->state == DONE_STATE) {
 311                 dws->cur_msg->status = 0;
 312                 giveback(dws);
 313         } else
 314                 tasklet_schedule(&dws->pump_transfers);
 315 }
 316 EXPORT_SYMBOL_GPL(dw_spi_xfer_done);
 317
 318 static irqreturn_t interrupt_transfer(struct dw_spi *dws)
 319 {
 320         u16 irq_status = dw_readw(dws, DW_SPI_ISR);
 321
 322         /* Error handling */
 323         if (irq_status & (SPI_INT_TXOI | SPI_INT_RXOI | SPI_INT_RXUI)) {
 324                 dw_readw(dws, DW_SPI_TXOICR);
 325                 dw_readw(dws, DW_SPI_RXOICR);
 326                 dw_readw(dws, DW_SPI_RXUICR);
 327                 int_error_stop(dws, "interrupt_transfer: fifo overrun/underrun");
 328                 return IRQ_HANDLED;
 329         }
 330
 331         dw_reader(dws);
 332         if (dws->rx_end == dws->rx) {
 333                 spi_mask_intr(dws, SPI_INT_TXEI);
 334                 dw_spi_xfer_done(dws);
 335                 return IRQ_HANDLED;
 336         }
 337         if (irq_status & SPI_INT_TXEI) {
 338                 spi_mask_intr(dws, SPI_INT_TXEI);
 339                 dw_writer(dws);
 340                 /* Enable TX irq always, it will be disabled when RX finished */
 341                 spi_umask_intr(dws, SPI_INT_TXEI);
 342         }
 343
 344         return IRQ_HANDLED;
 345 }
 346
 347 static irqreturn_t dw_spi_irq(int irq, void *dev_id)
 348 {
 349         struct dw_spi *dws = dev_id;
 350         u16 irq_status = dw_readw(dws, DW_SPI_ISR) & 0x3f;
 351
 352         if (!irq_status)
 353                 return IRQ_NONE;
 354
 355         if (!dws->cur_msg) {
 356                 spi_mask_intr(dws, SPI_INT_TXEI);
 357                 return IRQ_HANDLED;
 358         }
 359
 360         return dws->transfer_handler(dws);
 361 }
 362
 363 /* Must be called inside pump_transfers() */
 364 static void poll_transfer(struct dw_spi *dws)
 365 {
 366         do {
 367                 dw_writer(dws);
 368                 dw_reader(dws);
 369                 cpu_relax();
 370         } while (dws->rx_end > dws->rx);
 371
 372         dw_spi_xfer_done(dws);
 373 }
 374
 375 static void pump_transfers(unsigned long data)
 376 {
 377         struct dw_spi *dws = (struct dw_spi *)data;
 378         struct spi_message *message = NULL;
 379         struct spi_transfer *transfer = NULL;
 380         struct spi_transfer *previous = NULL;
 381         struct spi_device *spi = NULL;
 382         struct chip_data *chip = NULL;
 383         u8 bits = 0;
 384         u8 imask = 0;
 385         u8 cs_change = 0;
 386         u16 txint_level = 0;
 387         u16 clk_div = 0;
 388         u32 speed = 0;
 389         u32 cr0 = 0;
 390
 391         /* Get current state information */
 392         message = dws->cur_msg;
 393         transfer = dws->cur_transfer;
 394         chip = dws->cur_chip;
 395         spi = message->spi;
 396
 397         if (unlikely(!chip->clk_div))
 398                 chip->clk_div = dws->max_freq / chip->speed_hz;
 399
 400         if (message->state == ERROR_STATE) {
 401                 message->status = -EIO;
 402                 goto early_exit;
 403         }
 404
 405         /* Handle end of message */
 406         if (message->state == DONE_STATE) {
 407                 message->status = 0;
 408                 goto early_exit;
 409         }
 410
 411         /* Delay if requested at end of transfer*/
 412         if (message->state == RUNNING_STATE) {
 413                 previous = list_entry(transfer->transfer_list.prev,
 414                                         struct spi_transfer,
 415                                         transfer_list);
 416                 if (previous->delay_usecs)
 417                         udelay(previous->delay_usecs);
 418         }
 419
 420         dws->n_bytes = chip->n_bytes;
 421         dws->dma_width = chip->dma_width;
 422         dws->cs_control = chip->cs_control;
 423
 424         dws->rx_dma = transfer->rx_dma;
 425         dws->tx_dma = transfer->tx_dma;
 426         dws->tx = (void *)transfer->tx_buf;
 427         dws->tx_end = dws->tx + transfer->len;
 428         dws->rx = transfer->rx_buf;
 429         dws->rx_end = dws->rx + transfer->len;
 430         dws->len = dws->cur_transfer->len;
 431         if (chip != dws->prev_chip)
 432                 cs_change = 1;
 433
 434         cr0 = chip->cr0;
 435
 436         /* Handle per transfer options for bpw and speed */
 437         if (transfer->speed_hz) {
 438                 speed = chip->speed_hz;
 439
 440                 if (transfer->speed_hz != speed) {
 441                         speed = transfer->speed_hz;
 442                         if (speed > dws->max_freq) {
 443                                 printk(KERN_ERR "MRST SPI0: unsupported"
 444                                         "freq: %dHz\n", speed);
 445                                 message->status = -EIO;
 446                                 goto early_exit;
 447                         }
 448
 449                         /* clk_div doesn't support odd number */
 450                         clk_div = dws->max_freq / speed;
 451                         clk_div = (clk_div + 1) & 0xfffe;
 452
 453                         chip->speed_hz = speed;
 454                         chip->clk_div = clk_div;
 455                 }
 456         }
 457         if (transfer->bits_per_word) {
 458                 bits = transfer->bits_per_word;
 459                 dws->n_bytes = dws->dma_width = bits >> 3;
 460                 cr0 = (bits - 1)
 461                         | (chip->type << SPI_FRF_OFFSET)
 462                         | (spi->mode << SPI_MODE_OFFSET)
 463                         | (chip->tmode << SPI_TMOD_OFFSET);
 464         }
 465         message->state = RUNNING_STATE;
 466
 467         /*
 468          * Adjust transfer mode if necessary. Requires platform dependent
 469          * chipselect mechanism.
 470          */
 471         if (dws->cs_control) {
 472                 if (dws->rx && dws->tx)
 473                         chip->tmode = SPI_TMOD_TR;
 474                 else if (dws->rx)
 475                         chip->tmode = SPI_TMOD_RO;
 476                 else
 477                         chip->tmode = SPI_TMOD_TO;
 478
 479                 cr0 &= ~SPI_TMOD_MASK;
 480                 cr0 |= (chip->tmode << SPI_TMOD_OFFSET);
 481         }
 482
 483         /* Check if current transfer is a DMA transaction */
 484         dws->dma_mapped = map_dma_buffers(dws);
 485
 486         /*
 487          * Interrupt mode
 488          * we only need set the TXEI IRQ, as TX/RX always happen syncronizely
 489          */
 490         if (!dws->dma_mapped && !chip->poll_mode) {
 491                 int templen = dws->len / dws->n_bytes;
 492                 txint_level = dws->fifo_len / 2;
 493                 txint_level = (templen > txint_level) ? txint_level : templen;
 494
 495                 imask |= SPI_INT_TXEI | SPI_INT_TXOI | SPI_INT_RXUI | SPI_INT_RXOI;
 496                 dws->transfer_handler = interrupt_transfer;
 497         }
 498
 499         /*
 500          * Reprogram registers only if
 501          *      1. chip select changes
 502          *      2. clk_div is changed
 503          *      3. control value changes
 504          */
 505         if (dw_readw(dws, DW_SPI_CTRL0) != cr0 || cs_change || clk_div || imask) {
 506                 spi_enable_chip(dws, 0);
 507
 508                 if (dw_readw(dws, DW_SPI_CTRL0) != cr0)
 509                         dw_writew(dws, DW_SPI_CTRL0, cr0);
 510
 511                 spi_set_clk(dws, clk_div ? clk_div : chip->clk_div);
 512                 spi_chip_sel(dws, spi->chip_select);
 513
 514                 /* Set the interrupt mask, for poll mode just disable all int */
 515                 spi_mask_intr(dws, 0xff);
 516                 if (imask)
 517                         spi_umask_intr(dws, imask);
 518                 if (txint_level)
 519                         dw_writew(dws, DW_SPI_TXFLTR, txint_level);
 520
 521                 spi_enable_chip(dws, 1);
 522                 if (cs_change)
 523                         dws->prev_chip = chip;
 524         }
 525
 526         if (dws->dma_mapped)
 527                 dws->dma_ops->dma_transfer(dws, cs_change);
 528
 529         if (chip->poll_mode)
 530                 poll_transfer(dws);
 531
 532         return;
 533
 534 early_exit:
 535         giveback(dws);
 536         return;
 537 }
 538
 539 static void pump_messages(struct work_struct *work)
 540 {
 541         struct dw_spi *dws =
 542                 container_of(work, struct dw_spi, pump_messages);
 543         unsigned long flags;
 544
 545         /* Lock queue and check for queue work */
 546         spin_lock_irqsave(&dws->lock, flags);
 547         if (list_empty(&dws->queue) || dws->run == QUEUE_STOPPED) {
 548                 dws->busy = 0;
 549                 spin_unlock_irqrestore(&dws->lock, flags);
 550                 return;
 551         }
 552
 553         /* Make sure we are not already running a message */
 554         if (dws->cur_msg) {
 555                 spin_unlock_irqrestore(&dws->lock, flags);
 556                 return;
 557         }
 558
 559         /* Extract head of queue */
 560         dws->cur_msg = list_entry(dws->queue.next, struct spi_message, queue);
 561         list_del_init(&dws->cur_msg->queue);
 562
 563         /* Initial message state*/
 564         dws->cur_msg->state = START_STATE;
 565         dws->cur_transfer = list_entry(dws->cur_msg->transfers.next,
 566                                                 struct spi_transfer,
 567                                                 transfer_list);
 568         dws->cur_chip = spi_get_ctldata(dws->cur_msg->spi);
 569
 570         /* Mark as busy and launch transfers */
 571         tasklet_schedule(&dws->pump_transfers);
 572
 573         dws->busy = 1;
 574         spin_unlock_irqrestore(&dws->lock, flags);
 575 }
 576
 577 /* spi_device use this to queue in their spi_msg */
 578 static int dw_spi_transfer(struct spi_device *spi, struct spi_message *msg)
 579 {
 580         struct dw_spi *dws = spi_master_get_devdata(spi->master);
 581         unsigned long flags;
 582
 583         spin_lock_irqsave(&dws->lock, flags);
 584
 585         if (dws->run == QUEUE_STOPPED) {
 586                 spin_unlock_irqrestore(&dws->lock, flags);
 587                 return -ESHUTDOWN;
 588         }
 589
 590         msg->actual_length = 0;
 591         msg->status = -EINPROGRESS;
 592         msg->state = START_STATE;
 593
 594         list_add_tail(&msg->queue, &dws->queue);
 595
 596         if (dws->run == QUEUE_RUNNING && !dws->busy) {
 597
 598                 if (dws->cur_transfer || dws->cur_msg)
 599                         queue_work(dws->workqueue,
 600                                         &dws->pump_messages);
 601                 else {
 602                         /* If no other data transaction in air, just go */
 603                         spin_unlock_irqrestore(&dws->lock, flags);
 604                         pump_messages(&dws->pump_messages);
 605                         return 0;
 606                 }
 607         }
 608
 609         spin_unlock_irqrestore(&dws->lock, flags);
 610         return 0;
 611 }
 612
 613 /* This may be called twice for each spi dev */
 614 static int dw_spi_setup(struct spi_device *spi)
 615 {
 616         struct dw_spi_chip *chip_info = NULL;
 617         struct chip_data *chip;
 618
 619         /* Only alloc on first setup */
 620         chip = spi_get_ctldata(spi);
 621         if (!chip) {
 622                 chip = devm_kzalloc(&spi->dev, sizeof(struct chip_data),
 623                                 GFP_KERNEL);
 624                 if (!chip)
 625                         return -ENOMEM;
 626                 spi_set_ctldata(spi, chip);
 627         }
 628
 629         /*
 630          * Protocol drivers may change the chip settings, so...
 631          * if chip_info exists, use it
 632          */
 633         chip_info = spi->controller_data;
 634
 635         /* chip_info doesn't always exist */
 636         if (chip_info) {
 637                 if (chip_info->cs_control)
 638                         chip->cs_control = chip_info->cs_control;
 639
 640                 chip->poll_mode = chip_info->poll_mode;
 641                 chip->type = chip_info->type;
 642
 643                 chip->rx_threshold = 0;
 644                 chip->tx_threshold = 0;
 645
 646                 chip->enable_dma = chip_info->enable_dma;
 647         }
 648
 649         if (spi->bits_per_word == 8) {
 650                 chip->n_bytes = 1;
 651                 chip->dma_width = 1;
 652         } else if (spi->bits_per_word == 16) {
 653                 chip->n_bytes = 2;
 654                 chip->dma_width = 2;
 655         }
 656         chip->bits_per_word = spi->bits_per_word;
 657
 658         if (!spi->max_speed_hz) {
 659                 dev_err(&spi->dev, "No max speed HZ parameter\n");
 660                 return -EINVAL;
 661         }
 662         chip->speed_hz = spi->max_speed_hz;
 663
 664         chip->tmode = 0; /* Tx & Rx */
 665         /* Default SPI mode is SCPOL = 0, SCPH = 0 */
 666         chip->cr0 = (chip->bits_per_word - 1)
 667                         | (chip->type << SPI_FRF_OFFSET)
 668                         | (spi->mode  << SPI_MODE_OFFSET)
 669                         | (chip->tmode << SPI_TMOD_OFFSET);
 670
 671         return 0;
 672 }
 673
 674 static void dw_spi_cleanup(struct spi_device *spi)
 675 {
 676         struct chip_data *chip = spi_get_ctldata(spi);
 677         kfree(chip);
 678 }
 679
 680 static int init_queue(struct dw_spi *dws)
 681 {
 682         INIT_LIST_HEAD(&dws->queue);
 683         spin_lock_init(&dws->lock);
 684
 685         dws->run = QUEUE_STOPPED;
 686         dws->busy = 0;
 687
 688         tasklet_init(&dws->pump_transfers,
 689                         pump_transfers, (unsigned long)dws);
 690
 691         INIT_WORK(&dws->pump_messages, pump_messages);
 692         dws->workqueue = create_singlethread_workqueue(
 693                                         dev_name(dws->master->dev.parent));
 694         if (dws->workqueue == NULL)
 695                 return -EBUSY;
 696
 697         return 0;
 698 }
 699
 700 static int start_queue(struct dw_spi *dws)
 701 {
 702         unsigned long flags;
 703
 704         spin_lock_irqsave(&dws->lock, flags);
 705
 706         if (dws->run == QUEUE_RUNNING || dws->busy) {
 707                 spin_unlock_irqrestore(&dws->lock, flags);
 708                 return -EBUSY;
 709         }
 710
 711         dws->run = QUEUE_RUNNING;
 712         dws->cur_msg = NULL;
 713         dws->cur_transfer = NULL;
 714         dws->cur_chip = NULL;
 715         dws->prev_chip = NULL;
 716         spin_unlock_irqrestore(&dws->lock, flags);
 717
 718         queue_work(dws->workqueue, &dws->pump_messages);
 719
 720         return 0;
 721 }
 722
 723 static int stop_queue(struct dw_spi *dws)
 724 {
 725         unsigned long flags;
 726         unsigned limit = 50;
 727         int status = 0;
 728
 729         spin_lock_irqsave(&dws->lock, flags);
 730         dws->run = QUEUE_STOPPED;
 731         while ((!list_empty(&dws->queue) || dws->busy) && limit--) {
 732                 spin_unlock_irqrestore(&dws->lock, flags);
 733                 msleep(10);
 734                 spin_lock_irqsave(&dws->lock, flags);
 735         }
 736
 737         if (!list_empty(&dws->queue) || dws->busy)
 738                 status = -EBUSY;
 739         spin_unlock_irqrestore(&dws->lock, flags);
 740
 741         return status;
 742 }
 743
 744 static int destroy_queue(struct dw_spi *dws)
 745 {
 746         int status;
 747
 748         status = stop_queue(dws);
 749         if (status != 0)
 750                 return status;
 751         destroy_workqueue(dws->workqueue);
 752         return 0;
 753 }
 754
 755 /* Restart the controller, disable all interrupts, clean rx fifo */
 756 static void spi_hw_init(struct dw_spi *dws)
 757 {
 758         spi_enable_chip(dws, 0);
 759         spi_mask_intr(dws, 0xff);
 760         spi_enable_chip(dws, 1);
 761
 762         /*
 763          * Try to detect the FIFO depth if not set by interface driver,
 764          * the depth could be from 2 to 256 from HW spec
 765          */
 766         if (!dws->fifo_len) {
 767                 u32 fifo;
 768                 for (fifo = 2; fifo <= 257; fifo++) {
 769                         dw_writew(dws, DW_SPI_TXFLTR, fifo);
 770                         if (fifo != dw_readw(dws, DW_SPI_TXFLTR))
 771                                 break;
 772                 }
 773
 774                 dws->fifo_len = (fifo == 257) ? 0 : fifo;
 775                 dw_writew(dws, DW_SPI_TXFLTR, 0);
 776         }
 777 }
 778
 779 int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
 780 {
 781         struct spi_master *master;
 782         int ret;
 783
 784         BUG_ON(dws == NULL);
 785
 786         master = spi_alloc_master(dev, 0);
 787         if (!master)
 788                 return -ENOMEM;
 789
 790         dws->master = master;
 791         dws->type = SSI_MOTO_SPI;
 792         dws->prev_chip = NULL;
 793         dws->dma_inited = 0;
 794         dws->dma_addr = (dma_addr_t)(dws->paddr + 0x60);
 795         snprintf(dws->name, sizeof(dws->name), "dw_spi%d",
 796                         dws->bus_num);
 797
 798         ret = devm_request_irq(dev, dws->irq, dw_spi_irq, IRQF_SHARED,
 799                         dws->name, dws);
 800         if (ret < 0) {
 801                 dev_err(&master->dev, "can not get IRQ\n");
 802                 goto err_free_master;
 803         }
 804
 805         master->mode_bits = SPI_CPOL | SPI_CPHA;
 806         master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
 807         master->bus_num = dws->bus_num;
 808         master->num_chipselect = dws->num_cs;
 809         master->cleanup = dw_spi_cleanup;
 810         master->setup = dw_spi_setup;
 811         master->transfer = dw_spi_transfer;
 812
 813         /* Basic HW init */
 814         spi_hw_init(dws);
 815
 816         if (dws->dma_ops && dws->dma_ops->dma_init) {
 817                 ret = dws->dma_ops->dma_init(dws);
 818                 if (ret) {
 819                         dev_warn(&master->dev, "DMA init failed\n");
 820                         dws->dma_inited = 0;
 821                 }
 822         }
 823
 824         /* Initial and start queue */
 825         ret = init_queue(dws);
 826         if (ret) {
 827                 dev_err(&master->dev, "problem initializing queue\n");
 828                 goto err_diable_hw;
 829         }
 830         ret = start_queue(dws);
 831         if (ret) {
 832                 dev_err(&master->dev, "problem starting queue\n");
 833                 goto err_diable_hw;
 834         }
 835
 836         spi_master_set_devdata(master, dws);
 837         ret = devm_spi_register_master(dev, master);
 838         if (ret) {
 839                 dev_err(&master->dev, "problem registering spi master\n");
 840                 goto err_queue_alloc;
 841         }
 842
 843         mrst_spi_debugfs_init(dws);
 844         return 0;
 845
 846 err_queue_alloc:
 847         destroy_queue(dws);
 848         if (dws->dma_ops && dws->dma_ops->dma_exit)
 849                 dws->dma_ops->dma_exit(dws);
 850 err_diable_hw:
 851         spi_enable_chip(dws, 0);
 852 err_free_master:
 853         spi_master_put(master);
 854         return ret;
 855 }
 856 EXPORT_SYMBOL_GPL(dw_spi_add_host);
 857
 858 void dw_spi_remove_host(struct dw_spi *dws)
 859 {
 860         int status = 0;
 861
 862         if (!dws)
 863                 return;
 864         mrst_spi_debugfs_remove(dws);
 865
 866         /* Remove the queue */
 867         status = destroy_queue(dws);
 868         if (status != 0)
 869                 dev_err(&dws->master->dev,
 870                         "dw_spi_remove: workqueue will not complete, message memory not freed\n");
 871
 872         if (dws->dma_ops && dws->dma_ops->dma_exit)
 873                 dws->dma_ops->dma_exit(dws);
 874         spi_enable_chip(dws, 0);
 875         /* Disable clk */
 876         spi_set_clk(dws, 0);
 877 }
 878 EXPORT_SYMBOL_GPL(dw_spi_remove_host);
 879
 880 int dw_spi_suspend_host(struct dw_spi *dws)
 881 {
 882         int ret = 0;
 883
 884         ret = stop_queue(dws);
 885         if (ret)
 886                 return ret;
 887         spi_enable_chip(dws, 0);
 888         spi_set_clk(dws, 0);
 889         return ret;
 890 }
 891 EXPORT_SYMBOL_GPL(dw_spi_suspend_host);
 892
 893 int dw_spi_resume_host(struct dw_spi *dws)
 894 {
 895         int ret;
 896
 897         spi_hw_init(dws);
 898         ret = start_queue(dws);
 899         if (ret)
 900                 dev_err(&dws->master->dev, "fail to start queue (%d)\n", ret);
 901         return ret;
 902 }
 903 EXPORT_SYMBOL_GPL(dw_spi_resume_host);
 904
 905 MODULE_AUTHOR("Feng Tang <feng.tang@intel.com>");
 906 MODULE_DESCRIPTION("Driver for DesignWare SPI controller core");
 907 MODULE_LICENSE("GPL v2");