drivers/spi/spi-bcm63xx.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Broadcom BCM63xx SPI controller support
   4  *
   5  * Copyright (C) 2009-2012 Florian Fainelli <florian@openwrt.org>
   6  * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
   7  */
   8
   9 #include <linux/kernel.h>
  10 #include <linux/clk.h>
  11 #include <linux/io.h>
  12 #include <linux/module.h>
  13 #include <linux/platform_device.h>
  14 #include <linux/delay.h>
  15 #include <linux/interrupt.h>
  16 #include <linux/spi/spi.h>
  17 #include <linux/completion.h>
  18 #include <linux/err.h>
  19 #include <linux/pm_runtime.h>
  20 #include <linux/of.h>
  21 #include <linux/reset.h>
  22
  23 /* BCM 6338/6348 SPI core */
  24 #define SPI_6348_RSET_SIZE              64
  25 #define SPI_6348_CMD                    0x00    /* 16-bits register */
  26 #define SPI_6348_INT_STATUS             0x02
  27 #define SPI_6348_INT_MASK_ST            0x03
  28 #define SPI_6348_INT_MASK               0x04
  29 #define SPI_6348_ST                     0x05
  30 #define SPI_6348_CLK_CFG                0x06
  31 #define SPI_6348_FILL_BYTE              0x07
  32 #define SPI_6348_MSG_TAIL               0x09
  33 #define SPI_6348_RX_TAIL                0x0b
  34 #define SPI_6348_MSG_CTL                0x40    /* 8-bits register */
  35 #define SPI_6348_MSG_CTL_WIDTH          8
  36 #define SPI_6348_MSG_DATA               0x41
  37 #define SPI_6348_MSG_DATA_SIZE          0x3f
  38 #define SPI_6348_RX_DATA                0x80
  39 #define SPI_6348_RX_DATA_SIZE           0x3f
  40
  41 /* BCM 3368/6358/6262/6368 SPI core */
  42 #define SPI_6358_RSET_SIZE              1804
  43 #define SPI_6358_MSG_CTL                0x00    /* 16-bits register */
  44 #define SPI_6358_MSG_CTL_WIDTH          16
  45 #define SPI_6358_MSG_DATA               0x02
  46 #define SPI_6358_MSG_DATA_SIZE          0x21e
  47 #define SPI_6358_RX_DATA                0x400
  48 #define SPI_6358_RX_DATA_SIZE           0x220
  49 #define SPI_6358_CMD                    0x700   /* 16-bits register */
  50 #define SPI_6358_INT_STATUS             0x702
  51 #define SPI_6358_INT_MASK_ST            0x703
  52 #define SPI_6358_INT_MASK               0x704
  53 #define SPI_6358_ST                     0x705
  54 #define SPI_6358_CLK_CFG                0x706
  55 #define SPI_6358_FILL_BYTE              0x707
  56 #define SPI_6358_MSG_TAIL               0x709
  57 #define SPI_6358_RX_TAIL                0x70B
  58
  59 /* Shared SPI definitions */
  60
  61 /* Message configuration */
  62 #define SPI_FD_RW                       0x00
  63 #define SPI_HD_W                        0x01
  64 #define SPI_HD_R                        0x02
  65 #define SPI_BYTE_CNT_SHIFT              0
  66 #define SPI_6348_MSG_TYPE_SHIFT         6
  67 #define SPI_6358_MSG_TYPE_SHIFT         14
  68
  69 /* Command */
  70 #define SPI_CMD_NOOP                    0x00
  71 #define SPI_CMD_SOFT_RESET              0x01
  72 #define SPI_CMD_HARD_RESET              0x02
  73 #define SPI_CMD_START_IMMEDIATE         0x03
  74 #define SPI_CMD_COMMAND_SHIFT           0
  75 #define SPI_CMD_COMMAND_MASK            0x000f
  76 #define SPI_CMD_DEVICE_ID_SHIFT         4
  77 #define SPI_CMD_PREPEND_BYTE_CNT_SHIFT  8
  78 #define SPI_CMD_ONE_BYTE_SHIFT          11
  79 #define SPI_CMD_ONE_WIRE_SHIFT          12
  80 #define SPI_DEV_ID_0                    0
  81 #define SPI_DEV_ID_1                    1
  82 #define SPI_DEV_ID_2                    2
  83 #define SPI_DEV_ID_3                    3
  84
  85 /* Interrupt mask */
  86 #define SPI_INTR_CMD_DONE               0x01
  87 #define SPI_INTR_RX_OVERFLOW            0x02
  88 #define SPI_INTR_TX_UNDERFLOW           0x04
  89 #define SPI_INTR_TX_OVERFLOW            0x08
  90 #define SPI_INTR_RX_UNDERFLOW           0x10
  91 #define SPI_INTR_CLEAR_ALL              0x1f
  92
  93 /* Status */
  94 #define SPI_RX_EMPTY                    0x02
  95 #define SPI_CMD_BUSY                    0x04
  96 #define SPI_SERIAL_BUSY                 0x08
  97
  98 /* Clock configuration */
  99 #define SPI_CLK_20MHZ                   0x00
 100 #define SPI_CLK_0_391MHZ                0x01
 101 #define SPI_CLK_0_781MHZ                0x02    /* default */
 102 #define SPI_CLK_1_563MHZ                0x03
 103 #define SPI_CLK_3_125MHZ                0x04
 104 #define SPI_CLK_6_250MHZ                0x05
 105 #define SPI_CLK_12_50MHZ                0x06
 106 #define SPI_CLK_MASK                    0x07
 107 #define SPI_SSOFFTIME_MASK              0x38
 108 #define SPI_SSOFFTIME_SHIFT             3
 109 #define SPI_BYTE_SWAP                   0x80
 110
 111 enum bcm63xx_regs_spi {
 112         SPI_CMD,
 113         SPI_INT_STATUS,
 114         SPI_INT_MASK_ST,
 115         SPI_INT_MASK,
 116         SPI_ST,
 117         SPI_CLK_CFG,
 118         SPI_FILL_BYTE,
 119         SPI_MSG_TAIL,
 120         SPI_RX_TAIL,
 121         SPI_MSG_CTL,
 122         SPI_MSG_DATA,
 123         SPI_RX_DATA,
 124         SPI_MSG_TYPE_SHIFT,
 125         SPI_MSG_CTL_WIDTH,
 126         SPI_MSG_DATA_SIZE,
 127 };
 128
 129 #define BCM63XX_SPI_MAX_PREPEND         15
 130
 131 #define BCM63XX_SPI_MAX_CS              8
 132 #define BCM63XX_SPI_BUS_NUM             0
 133
 134 struct bcm63xx_spi {
 135         struct completion       done;
 136
 137         void __iomem            *regs;
 138         int                     irq;
 139
 140         /* Platform data */
 141         const unsigned long     *reg_offsets;
 142         unsigned int            fifo_size;
 143         unsigned int            msg_type_shift;
 144         unsigned int            msg_ctl_width;
 145
 146         /* data iomem */
 147         u8 __iomem              *tx_io;
 148         const u8 __iomem        *rx_io;
 149
 150         struct clk              *clk;
 151         struct platform_device  *pdev;
 152 };
 153
 154 static inline u8 bcm_spi_readb(struct bcm63xx_spi *bs,
 155                                unsigned int offset)
 156 {
 157         return readb(bs->regs + bs->reg_offsets[offset]);
 158 }
 159
 160 static inline u16 bcm_spi_readw(struct bcm63xx_spi *bs,
 161                                 unsigned int offset)
 162 {
 163 #ifdef CONFIG_CPU_BIG_ENDIAN
 164         return ioread16be(bs->regs + bs->reg_offsets[offset]);
 165 #else
 166         return readw(bs->regs + bs->reg_offsets[offset]);
 167 #endif
 168 }
 169
 170 static inline void bcm_spi_writeb(struct bcm63xx_spi *bs,
 171                                   u8 value, unsigned int offset)
 172 {
 173         writeb(value, bs->regs + bs->reg_offsets[offset]);
 174 }
 175
 176 static inline void bcm_spi_writew(struct bcm63xx_spi *bs,
 177                                   u16 value, unsigned int offset)
 178 {
 179 #ifdef CONFIG_CPU_BIG_ENDIAN
 180         iowrite16be(value, bs->regs + bs->reg_offsets[offset]);
 181 #else
 182         writew(value, bs->regs + bs->reg_offsets[offset]);
 183 #endif
 184 }
 185
 186 static const unsigned int bcm63xx_spi_freq_table[SPI_CLK_MASK][2] = {
 187         { 20000000, SPI_CLK_20MHZ },
 188         { 12500000, SPI_CLK_12_50MHZ },
 189         {  6250000, SPI_CLK_6_250MHZ },
 190         {  3125000, SPI_CLK_3_125MHZ },
 191         {  1563000, SPI_CLK_1_563MHZ },
 192         {   781000, SPI_CLK_0_781MHZ },
 193         {   391000, SPI_CLK_0_391MHZ }
 194 };
 195
 196 static void bcm63xx_spi_setup_transfer(struct spi_device *spi,
 197                                       struct spi_transfer *t)
 198 {
 199         struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
 200         u8 clk_cfg, reg;
 201         int i;
 202
 203         /* Default to lowest clock configuration */
 204         clk_cfg = SPI_CLK_0_391MHZ;
 205
 206         /* Find the closest clock configuration */
 207         for (i = 0; i < SPI_CLK_MASK; i++) {
 208                 if (t->speed_hz >= bcm63xx_spi_freq_table[i][0]) {
 209                         clk_cfg = bcm63xx_spi_freq_table[i][1];
 210                         break;
 211                 }
 212         }
 213
 214         /* clear existing clock configuration bits of the register */
 215         reg = bcm_spi_readb(bs, SPI_CLK_CFG);
 216         reg &= ~SPI_CLK_MASK;
 217         reg |= clk_cfg;
 218
 219         bcm_spi_writeb(bs, reg, SPI_CLK_CFG);
 220         dev_dbg(&spi->dev, "Setting clock register to %02x (hz %d)\n",
 221                 clk_cfg, t->speed_hz);
 222 }
 223
 224 /* the spi->mode bits understood by this driver: */
 225 #define MODEBITS (SPI_CPOL | SPI_CPHA)
 226
 227 static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *first,
 228                                 unsigned int num_transfers)
 229 {
 230         struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
 231         u16 msg_ctl;
 232         u16 cmd;
 233         unsigned int i, timeout = 0, prepend_len = 0, len = 0;
 234         struct spi_transfer *t = first;
 235         bool do_rx = false;
 236         bool do_tx = false;
 237
 238         /* Disable the CMD_DONE interrupt */
 239         bcm_spi_writeb(bs, 0, SPI_INT_MASK);
 240
 241         dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
 242                 t->tx_buf, t->rx_buf, t->len);
 243
 244         if (num_transfers > 1 && t->tx_buf && t->len <= BCM63XX_SPI_MAX_PREPEND)
 245                 prepend_len = t->len;
 246
 247         /* prepare the buffer */
 248         for (i = 0; i < num_transfers; i++) {
 249                 if (t->tx_buf) {
 250                         do_tx = true;
 251                         memcpy_toio(bs->tx_io + len, t->tx_buf, t->len);
 252
 253                         /* don't prepend more than one tx */
 254                         if (t != first)
 255                                 prepend_len = 0;
 256                 }
 257
 258                 if (t->rx_buf) {
 259                         do_rx = true;
 260                         /* prepend is half-duplex write only */
 261                         if (t == first)
 262                                 prepend_len = 0;
 263                 }
 264
 265                 len += t->len;
 266
 267                 t = list_entry(t->transfer_list.next, struct spi_transfer,
 268                                transfer_list);
 269         }
 270
 271         reinit_completion(&bs->done);
 272
 273         /* Fill in the Message control register */
 274         msg_ctl = (len << SPI_BYTE_CNT_SHIFT);
 275
 276         if (do_rx && do_tx && prepend_len == 0)
 277                 msg_ctl |= (SPI_FD_RW << bs->msg_type_shift);
 278         else if (do_rx)
 279                 msg_ctl |= (SPI_HD_R << bs->msg_type_shift);
 280         else if (do_tx)
 281                 msg_ctl |= (SPI_HD_W << bs->msg_type_shift);
 282
 283         switch (bs->msg_ctl_width) {
 284         case 8:
 285                 bcm_spi_writeb(bs, msg_ctl, SPI_MSG_CTL);
 286                 break;
 287         case 16:
 288                 bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL);
 289                 break;
 290         }
 291
 292         /* Issue the transfer */
 293         cmd = SPI_CMD_START_IMMEDIATE;
 294         cmd |= (prepend_len << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
 295         cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT);
 296         bcm_spi_writew(bs, cmd, SPI_CMD);
 297
 298         /* Enable the CMD_DONE interrupt */
 299         bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
 300
 301         timeout = wait_for_completion_timeout(&bs->done, HZ);
 302         if (!timeout)
 303                 return -ETIMEDOUT;
 304
 305         if (!do_rx)
 306                 return 0;
 307
 308         len = 0;
 309         t = first;
 310         /* Read out all the data */
 311         for (i = 0; i < num_transfers; i++) {
 312                 if (t->rx_buf)
 313                         memcpy_fromio(t->rx_buf, bs->rx_io + len, t->len);
 314
 315                 if (t != first || prepend_len == 0)
 316                         len += t->len;
 317
 318                 t = list_entry(t->transfer_list.next, struct spi_transfer,
 319                                transfer_list);
 320         }
 321
 322         return 0;
 323 }
 324
 325 static int bcm63xx_spi_transfer_one(struct spi_master *master,
 326                                         struct spi_message *m)
 327 {
 328         struct bcm63xx_spi *bs = spi_master_get_devdata(master);
 329         struct spi_transfer *t, *first = NULL;
 330         struct spi_device *spi = m->spi;
 331         int status = 0;
 332         unsigned int n_transfers = 0, total_len = 0;
 333         bool can_use_prepend = false;
 334
 335         /*
 336          * This SPI controller does not support keeping CS active after a
 337          * transfer.
 338          * Work around this by merging as many transfers we can into one big
 339          * full-duplex transfers.
 340          */
 341         list_for_each_entry(t, &m->transfers, transfer_list) {
 342                 if (!first)
 343                         first = t;
 344
 345                 n_transfers++;
 346                 total_len += t->len;
 347
 348                 if (n_transfers == 2 && !first->rx_buf && !t->tx_buf &&
 349                     first->len <= BCM63XX_SPI_MAX_PREPEND)
 350                         can_use_prepend = true;
 351                 else if (can_use_prepend && t->tx_buf)
 352                         can_use_prepend = false;
 353
 354                 /* we can only transfer one fifo worth of data */
 355                 if ((can_use_prepend &&
 356                      total_len > (bs->fifo_size + BCM63XX_SPI_MAX_PREPEND)) ||
 357                     (!can_use_prepend && total_len > bs->fifo_size)) {
 358                         dev_err(&spi->dev, "unable to do transfers larger than FIFO size (%i > %i)\n",
 359                                 total_len, bs->fifo_size);
 360                         status = -EINVAL;
 361                         goto exit;
 362                 }
 363
 364                 /* all combined transfers have to have the same speed */
 365                 if (t->speed_hz != first->speed_hz) {
 366                         dev_err(&spi->dev, "unable to change speed between transfers\n");
 367                         status = -EINVAL;
 368                         goto exit;
 369                 }
 370
 371                 /* CS will be deasserted directly after transfer */
 372                 if (t->delay.value) {
 373                         dev_err(&spi->dev, "unable to keep CS asserted after transfer\n");
 374                         status = -EINVAL;
 375                         goto exit;
 376                 }
 377
 378                 if (t->cs_change ||
 379                     list_is_last(&t->transfer_list, &m->transfers)) {
 380                         /* configure adapter for a new transfer */
 381                         bcm63xx_spi_setup_transfer(spi, first);
 382
 383                         /* send the data */
 384                         status = bcm63xx_txrx_bufs(spi, first, n_transfers);
 385                         if (status)
 386                                 goto exit;
 387
 388                         m->actual_length += total_len;
 389
 390                         first = NULL;
 391                         n_transfers = 0;
 392                         total_len = 0;
 393                         can_use_prepend = false;
 394                 }
 395         }
 396 exit:
 397         m->status = status;
 398         spi_finalize_current_message(master);
 399
 400         return 0;
 401 }
 402
 403 /* This driver supports single master mode only. Hence
 404  * CMD_DONE is the only interrupt we care about
 405  */
 406 static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id)
 407 {
 408         struct spi_master *master = (struct spi_master *)dev_id;
 409         struct bcm63xx_spi *bs = spi_master_get_devdata(master);
 410         u8 intr;
 411
 412         /* Read interupts and clear them immediately */
 413         intr = bcm_spi_readb(bs, SPI_INT_STATUS);
 414         bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
 415         bcm_spi_writeb(bs, 0, SPI_INT_MASK);
 416
 417         /* A transfer completed */
 418         if (intr & SPI_INTR_CMD_DONE)
 419                 complete(&bs->done);
 420
 421         return IRQ_HANDLED;
 422 }
 423
 424 static size_t bcm63xx_spi_max_length(struct spi_device *spi)
 425 {
 426         struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
 427
 428         return bs->fifo_size;
 429 }
 430
 431 static const unsigned long bcm6348_spi_reg_offsets[] = {
 432         [SPI_CMD]               = SPI_6348_CMD,
 433         [SPI_INT_STATUS]        = SPI_6348_INT_STATUS,
 434         [SPI_INT_MASK_ST]       = SPI_6348_INT_MASK_ST,
 435         [SPI_INT_MASK]          = SPI_6348_INT_MASK,
 436         [SPI_ST]                = SPI_6348_ST,
 437         [SPI_CLK_CFG]           = SPI_6348_CLK_CFG,
 438         [SPI_FILL_BYTE]         = SPI_6348_FILL_BYTE,
 439         [SPI_MSG_TAIL]          = SPI_6348_MSG_TAIL,
 440         [SPI_RX_TAIL]           = SPI_6348_RX_TAIL,
 441         [SPI_MSG_CTL]           = SPI_6348_MSG_CTL,
 442         [SPI_MSG_DATA]          = SPI_6348_MSG_DATA,
 443         [SPI_RX_DATA]           = SPI_6348_RX_DATA,
 444         [SPI_MSG_TYPE_SHIFT]    = SPI_6348_MSG_TYPE_SHIFT,
 445         [SPI_MSG_CTL_WIDTH]     = SPI_6348_MSG_CTL_WIDTH,
 446         [SPI_MSG_DATA_SIZE]     = SPI_6348_MSG_DATA_SIZE,
 447 };
 448
 449 static const unsigned long bcm6358_spi_reg_offsets[] = {
 450         [SPI_CMD]               = SPI_6358_CMD,
 451         [SPI_INT_STATUS]        = SPI_6358_INT_STATUS,
 452         [SPI_INT_MASK_ST]       = SPI_6358_INT_MASK_ST,
 453         [SPI_INT_MASK]          = SPI_6358_INT_MASK,
 454         [SPI_ST]                = SPI_6358_ST,
 455         [SPI_CLK_CFG]           = SPI_6358_CLK_CFG,
 456         [SPI_FILL_BYTE]         = SPI_6358_FILL_BYTE,
 457         [SPI_MSG_TAIL]          = SPI_6358_MSG_TAIL,
 458         [SPI_RX_TAIL]           = SPI_6358_RX_TAIL,
 459         [SPI_MSG_CTL]           = SPI_6358_MSG_CTL,
 460         [SPI_MSG_DATA]          = SPI_6358_MSG_DATA,
 461         [SPI_RX_DATA]           = SPI_6358_RX_DATA,
 462         [SPI_MSG_TYPE_SHIFT]    = SPI_6358_MSG_TYPE_SHIFT,
 463         [SPI_MSG_CTL_WIDTH]     = SPI_6358_MSG_CTL_WIDTH,
 464         [SPI_MSG_DATA_SIZE]     = SPI_6358_MSG_DATA_SIZE,
 465 };
 466
 467 static const struct platform_device_id bcm63xx_spi_dev_match[] = {
 468         {
 469                 .name = "bcm6348-spi",
 470                 .driver_data = (unsigned long)bcm6348_spi_reg_offsets,
 471         },
 472         {
 473                 .name = "bcm6358-spi",
 474                 .driver_data = (unsigned long)bcm6358_spi_reg_offsets,
 475         },
 476         {
 477         },
 478 };
 479
 480 static const struct of_device_id bcm63xx_spi_of_match[] = {
 481         { .compatible = "brcm,bcm6348-spi", .data = &bcm6348_spi_reg_offsets },
 482         { .compatible = "brcm,bcm6358-spi", .data = &bcm6358_spi_reg_offsets },
 483         { },
 484 };
 485
 486 static int bcm63xx_spi_probe(struct platform_device *pdev)
 487 {
 488         struct resource *r;
 489         const unsigned long *bcm63xx_spireg;
 490         struct device *dev = &pdev->dev;
 491         int irq, bus_num;
 492         struct spi_master *master;
 493         struct clk *clk;
 494         struct bcm63xx_spi *bs;
 495         int ret;
 496         u32 num_cs = BCM63XX_SPI_MAX_CS;
 497         struct reset_control *reset;
 498
 499         if (dev->of_node) {
 500                 const struct of_device_id *match;
 501
 502                 match = of_match_node(bcm63xx_spi_of_match, dev->of_node);
 503                 if (!match)
 504                         return -EINVAL;
 505                 bcm63xx_spireg = match->data;
 506
 507                 of_property_read_u32(dev->of_node, "num-cs", &num_cs);
 508                 if (num_cs > BCM63XX_SPI_MAX_CS) {
 509                         dev_warn(dev, "unsupported number of cs (%i), reducing to 8\n",
 510                                  num_cs);
 511                         num_cs = BCM63XX_SPI_MAX_CS;
 512                 }
 513
 514                 bus_num = -1;
 515         } else if (pdev->id_entry->driver_data) {
 516                 const struct platform_device_id *match = pdev->id_entry;
 517
 518                 bcm63xx_spireg = (const unsigned long *)match->driver_data;
 519                 bus_num = BCM63XX_SPI_BUS_NUM;
 520         } else {
 521                 return -EINVAL;
 522         }
 523
 524         irq = platform_get_irq(pdev, 0);
 525         if (irq < 0)
 526                 return irq;
 527
 528         clk = devm_clk_get(dev, "spi");
 529         if (IS_ERR(clk)) {
 530                 dev_err(dev, "no clock for device\n");
 531                 return PTR_ERR(clk);
 532         }
 533
 534         reset = devm_reset_control_get_optional_exclusive(dev, NULL);
 535         if (IS_ERR(reset))
 536                 return PTR_ERR(reset);
 537
 538         master = spi_alloc_master(dev, sizeof(*bs));
 539         if (!master) {
 540                 dev_err(dev, "out of memory\n");
 541                 return -ENOMEM;
 542         }
 543
 544         bs = spi_master_get_devdata(master);
 545         init_completion(&bs->done);
 546
 547         platform_set_drvdata(pdev, master);
 548         bs->pdev = pdev;
 549
 550         r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 551         bs->regs = devm_ioremap_resource(&pdev->dev, r);
 552         if (IS_ERR(bs->regs)) {
 553                 ret = PTR_ERR(bs->regs);
 554                 goto out_err;
 555         }
 556
 557         bs->irq = irq;
 558         bs->clk = clk;
 559         bs->reg_offsets = bcm63xx_spireg;
 560         bs->fifo_size = bs->reg_offsets[SPI_MSG_DATA_SIZE];
 561
 562         ret = devm_request_irq(&pdev->dev, irq, bcm63xx_spi_interrupt, 0,
 563                                                         pdev->name, master);
 564         if (ret) {
 565                 dev_err(dev, "unable to request irq\n");
 566                 goto out_err;
 567         }
 568
 569         master->dev.of_node = dev->of_node;
 570         master->bus_num = bus_num;
 571         master->num_chipselect = num_cs;
 572         master->transfer_one_message = bcm63xx_spi_transfer_one;
 573         master->mode_bits = MODEBITS;
 574         master->bits_per_word_mask = SPI_BPW_MASK(8);
 575         master->max_transfer_size = bcm63xx_spi_max_length;
 576         master->max_message_size = bcm63xx_spi_max_length;
 577         master->auto_runtime_pm = true;
 578         bs->msg_type_shift = bs->reg_offsets[SPI_MSG_TYPE_SHIFT];
 579         bs->msg_ctl_width = bs->reg_offsets[SPI_MSG_CTL_WIDTH];
 580         bs->tx_io = (u8 *)(bs->regs + bs->reg_offsets[SPI_MSG_DATA]);
 581         bs->rx_io = (const u8 *)(bs->regs + bs->reg_offsets[SPI_RX_DATA]);
 582
 583         /* Initialize hardware */
 584         ret = clk_prepare_enable(bs->clk);
 585         if (ret)
 586                 goto out_err;
 587
 588         ret = reset_control_reset(reset);
 589         if (ret) {
 590                 dev_err(dev, "unable to reset device: %d\n", ret);
 591                 goto out_clk_disable;
 592         }
 593
 594         bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
 595
 596         pm_runtime_enable(&pdev->dev);
 597
 598         /* register and we are done */
 599         ret = devm_spi_register_master(dev, master);
 600         if (ret) {
 601                 dev_err(dev, "spi register failed\n");
 602                 goto out_pm_disable;
 603         }
 604
 605         dev_info(dev, "at %pr (irq %d, FIFOs size %d)\n",
 606                  r, irq, bs->fifo_size);
 607
 608         return 0;
 609
 610 out_pm_disable:
 611         pm_runtime_disable(&pdev->dev);
 612 out_clk_disable:
 613         clk_disable_unprepare(clk);
 614 out_err:
 615         spi_master_put(master);
 616         return ret;
 617 }
 618
 619 static int bcm63xx_spi_remove(struct platform_device *pdev)
 620 {
 621         struct spi_master *master = platform_get_drvdata(pdev);
 622         struct bcm63xx_spi *bs = spi_master_get_devdata(master);
 623
 624         /* reset spi block */
 625         bcm_spi_writeb(bs, 0, SPI_INT_MASK);
 626
 627         /* HW shutdown */
 628         clk_disable_unprepare(bs->clk);
 629
 630         return 0;
 631 }
 632
 633 #ifdef CONFIG_PM_SLEEP
 634 static int bcm63xx_spi_suspend(struct device *dev)
 635 {
 636         struct spi_master *master = dev_get_drvdata(dev);
 637         struct bcm63xx_spi *bs = spi_master_get_devdata(master);
 638
 639         spi_master_suspend(master);
 640
 641         clk_disable_unprepare(bs->clk);
 642
 643         return 0;
 644 }
 645
 646 static int bcm63xx_spi_resume(struct device *dev)
 647 {
 648         struct spi_master *master = dev_get_drvdata(dev);
 649         struct bcm63xx_spi *bs = spi_master_get_devdata(master);
 650         int ret;
 651
 652         ret = clk_prepare_enable(bs->clk);
 653         if (ret)
 654                 return ret;
 655
 656         spi_master_resume(master);
 657
 658         return 0;
 659 }
 660 #endif
 661
 662 static const struct dev_pm_ops bcm63xx_spi_pm_ops = {
 663         SET_SYSTEM_SLEEP_PM_OPS(bcm63xx_spi_suspend, bcm63xx_spi_resume)
 664 };
 665
 666 static struct platform_driver bcm63xx_spi_driver = {
 667         .driver = {
 668                 .name   = "bcm63xx-spi",
 669                 .pm     = &bcm63xx_spi_pm_ops,
 670                 .of_match_table = bcm63xx_spi_of_match,
 671         },
 672         .id_table       = bcm63xx_spi_dev_match,
 673         .probe          = bcm63xx_spi_probe,
 674         .remove         = bcm63xx_spi_remove,
 675 };
 676
 677 module_platform_driver(bcm63xx_spi_driver);
 678
 679 MODULE_ALIAS("platform:bcm63xx_spi");
 680 MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
 681 MODULE_AUTHOR("Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>");
 682 MODULE_DESCRIPTION("Broadcom BCM63xx SPI Controller driver");
 683 MODULE_LICENSE("GPL");